REJ10J0746-0110
R8C/15, R8C/17 StarterKit
Tutorial
RENESAS SINGLE-CHIP MICROCOMPUTER
M16C FAMILY / R8C/Tiny SERIES
Rev.1.10
Revision date : Mar 01, 2005
Renesas Solutions Corp.
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
1.accessory softwares to install
2.Until a sample program is operated with an emulator software
P4
P4
2.1 Flash programmer (Flash development toolkit) Installation
2.2 Emulator Software, C Compiler and High-performance Embedded
Workshop Installations
2.3 USB driver installation
2.4 Operate Sample Program
P10
P14
P18
3
Download from Www.Somanuals.com. All Manuals Search And Download.
1. accessory softwares to install
1) Note the following points before installing.
a) The M3T-NC8C has already been installed.
b) The M3T-NC30WA has already been installed.
c) The emulator software has already been installed.
Install the software attached to this product after uninstalling the above software.
2) The directory and file names including space cannot be used.
3) The sample program uses C compiler, High-performance Embedded Workshop and emulator software to
this product.
4) Do not copy the sample program on “desktop”. Also do not copy it to the folder which includes “space” for
the folder name. “Space” cannot be recognized in High-performance Embedded Workshop.
2. Until a sample program is operated with an emulator software
Follow the procedure below to operate a sample program with an emulator software.
2.1 Flash programmer (Flash development toolkit) Installation
2.2 Emulator Software, C Compiler and High-performance Embedded Workshop Installations
2.3 USB driver installation
2.4 Operate Sample Program
2.1 Flash programmer (Flash development toolkit) Installation
1) Installation
Double-click a CD-ROM ( ¥ programmer ¥ ) installer.
2) An installation procedure is shown.
Read < Read Release Notes>. befor continuing the installation.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Click “OK”.
Click “Next”
Select language to be used and click "Next"
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Only when you agree with License Agreement, click "Yes".
Click “Next”.
Click “Next”.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Remove a check. Click “Next”
Click “Next”.
Refer to a new folder name, or select from the existing folder list and Click “Next”.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Refer to a new folder name, or select from the existing folder list and Click “Next”.
Click “Next”.
Click “Install”.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Click “finish”.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
2.2 Emulator Software, C Compiler and High-performance Embedded Workshop
Installations
1) Installation
Double-click an installer of CD-ROM ¥ dlp_tool ¥.
2) Installation procedures are described below.
Select the language to be used and click “Next”.
Click “Next”
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Only when you agree with License Agreement, click "Yes".
Select all and click “Next”
Refer to a new folder name, or select from the existing folder list and click “Next”.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Refer to a new folder name, or select from the existing folder list and click “Next”.
Click “Yes”
Check the setting before starting the installation and if the setting is correct, click “Next”.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Check the setting before starting the installation and if the setting is correct, click “Next”. Then, a
copy will be started.
Click “Finish”.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
2.3 USB driver installation
Connect the E8 emulator using the USB cable to the USB port of host machine.
<Windows XP>
Installation procedures are described below.
If the E8 emulator is connected, it is recognized as a new hardware.
Click “Next” after selecting “Install the software automatically”.
Click “Continue”.
Microsoft has advocated authentication of the USB drivers to the USB vendors in the Microsoft®
Windows® XP and Windows®-based operating systems released after Microsoft® Windows® XP.
This is aimed at elimination of illegal drivers and improvement of security of PC.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Renesas USB drivers are not authenticated by Microsoft, but we provide them based on the
sufficient examination.
Insert CD-ROM and specify ¥dlp_tool¥DRIVERS¥USB¥XP¥. Click “OK”.
Click “Finish”.
The installation is completed above.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
<Windows 98/ME>
Installation procedures are described below.
If E8 emulator is connected, it is recognized as a new hardware.
Click “Next” and start installing a driver.
Put a check into “search for the best driver for your device” and click “Next”.
Insert CD-ROM and Put a check into “Specify a location”.
Specify ¥dlp_tool¥DRIVERS¥USB¥ME¥ (or ¥98¥) and click “Next”.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Click “Next”.
Click “Finish”.
The installation is completed above.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
2.4 Operate Sample Program
1) Copy ¥Japanese¥M3A0115_17¥PROGRAM¥ in CD-ROM to the given folder.
2) Change a file attribute
Since the copied file attribute is set to “read-only”, change it to the attribute which can be read or written.
<Windows XP/2000>
Select “Property” of the copied folder and set to the attribute which can be read or written. Remove a
check of “Read-only” and click “Apply”. (Figure shows for Windows XP)
Remove a check
Put a check into “Apply changes to this folder, subfolders and files” and click “OK”.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Click “OK”.
The installation is completed above.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
<Windows 98/ME>
Select all files in the copied folder by a mouse.
Select “File” and “Property”.
Remove a check of “Read-only” and click “Apply”.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Click “Close”.
Perform this setting to files in all folders of “3min_timer” and “ad_onkai”.
The installation is completed above.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
3) Connect a target board
Use a user cable to the E8 emulator and connect a target board.
Perform the below setting for the jumper setting of a target board.
JP1 : “AN8”
JP2 : “BZ”
JP No.
JP1
Connecting Status
“AN8” side
“BZ” side
JP2
JP3
Open
22
Download from Www.Somanuals.com. All Manuals Search And Download.
4) Compile a sample program
The example of the musical scale program (ad_onkai.hws) is shown below.
(1) Start High-performance Embedded Workshop
Select “program” of start menu - “Renesas” - “High-performance Embedded Workshop” -
“High-performance Embedded Workshop” and click.
(2) Select “refer to another project work space” and click “OK”.
(3) Select the folder which is copied at 1) to “File location”. Select ad_onkai.hws and click “Open”.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
(4) Select “R5F21174” for Device and put a check into “Download emulator firmware” for Mode. Click
“OK”.
(5) When 5V power supply is performed from E8, put a check into “Power supply is carried out”. Select
5.0V and click “OK”.
(6) Select location to download a firmware and click “OK”.
(8) If clicking “Build” of menu - “All build” and compile.
The installation is completed above.
5) Execute a program
(1) Download a program
Click “Debug” - “Download” - “ad_onkai.x30”.
(2) Reset a CPU
Reset a CPU before executing a program. Click “Debug” - “Reset a CPU”.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
(3) Execute
Click “Debug” - “Execute”.
(4) If clicking “Debug” - “Stop a program”, a program will stop. When executing the program again, click
“Debug” - “Execute”.
<Musical Scale Program>
When a program execution starts, LED1(red) lights up. When pressing SW4 on the target board, the
buzzer starts sounding. When pressing SW4 again, the buzzer stops sounding.
<Three-minute Timer>
When a program execution starts, LED1(red) lights up. When pressing SW4 on the target board,
LED3(green) and LED4(green) light up and start counting. The buzzer sounds in three minutes.
When pressing SW1 while counting three minutes, stop counting.
6) Complete High-performance Embedded Workshop
When completing High-performance Embedded Workshop, click “Exit” of File
7) Finally, remove a USB Cable which is connected to the USB port.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
REVISION HISTORY
Description
Summary
Rev.
Date
Page
2004.08.18
2005.02.01
2005.03.01
-
-
0.10
1.00
1.10
First edition issued
It changed from FDTlight to flash programmer (Flash Development Toolkit).
The installation method changed, too.
P4
Add accessory softwares to install
Download from Www.Somanuals.com. All Manuals Search And Download.
R8C/15, R8C/17 StarterKit
Tutorial
Publication Date
Rev.1.10 Mar 01, 2005
Published by:
Renesas Solutions Corp.
4-1-6, Miyahara, Yodogawa-ku, Osaka City, 532-0003, Japan
©2005 Renesas Technology Corp. and Renesas Solutions Corp., All Rights Reserved. Printed in Japan.
Download from Www.Somanuals.com. All Manuals Search And Download.
R8C/15, R8C/17 StarterKit
Tutorial
Renesas Solutions Corp.
4-1-6, Miyahara, Yodogawa-ku, Osaka City, 532-0003, Japan
Download from Www.Somanuals.com. All Manuals Search And Download.
|
Radica Games Games G71029 User Guide
Rose electronic Switch Vista Mini User Guide
Rowenta Iron Travel Iron User Guide
RoyalTek GPS Receiver RGM 3600 User Guide
Samsung Microwave Oven G2712N User Guide
SanDisk DVR Video Memory Card Recorder User Guide
Sanyo Battery Charger HR AA User Guide
Sanyo Battery Charger N 1700SCK User Guide
Sanyo Camera Lens LNS S30 User Guide
Sears Saw BT400 User Guide