R0E5212BACFG00
Converter Board for 64-pin 0.8mm pitch LQFP
User’s Manual
* NQPACK, YQPACK, YQ-GUIDE and HQPACK are trademarks of Tokyo Eletech Corporation.
Keep safety first in your circuit designs!
z Renesas Technology Corporation and Renesas Solutions Corporation put the maximum effort into making semiconductor products
better and more reliable, but there is always the possibility that trouble may occur with them. Trouble with semiconductors may lead to
personal injury, fire or property damage. Remember to give due consideration to safety when making your circuit designs, with
appropriate measures such as (i) placement of substitutive, auxiliary circuits, (ii) use of nonflammable material or (iii) prevention
against any malfunction or mishap.
Notes regarding these materials
z These materials are intended as a reference to assist our customers in the selection of the Renesas Technology product best suited
to the customer's application; they do not convey any license under any intellectual property rights, or any other rights, belonging to
Renesas Technology Corporation, Renesas Solutions Corporation or a third party.
z Renesas Technology Corporation and Renesas Solutions Corporation assume no responsibility for any damage, or infringement of
any third-party's rights, originating in the use of any product data, diagrams, charts, programs, algorithms, or circuit application
examples contained in these materials.
z All information contained in these materials, including product data, diagrams, charts, programs and algorithms represents information
on products at the time of publication of these materials, and are subject to change by Renesas Technology Corporation and
Renesas Solutions Corporation without notice due to product improvements or other reasons. It is therefore recommended that
customers contact Renesas Technology Corporation, Renesas Solutions Corporation or an authorized Renesas Technology product
distributor for the latest product information before purchasing a product listed herein. The information described here may contain
technical inaccuracies or typographical errors. Renesas Technology Corporation and Renesas Solutions Corporation assume no
responsibility for any damage, liability, or other loss rising from these inaccuracies or errors. Please also pay attention to information
published by Renesas Technology Corporation and Renesas Solutions Corporation by various means, including the Renesas home
page (http://www.renesas.com).
z When using any or all of the information contained in these materials, including product data, diagrams, charts, programs, and
algorithms, please be sure to evaluate all information as a total system before making a final decision on the applicability of the
information and products. Renesas Technology Corporation and Renesas Solutions Corporation assume no responsibility for any
damage, liability or other loss resulting from the information contained herein.
z Renesas Technology semiconductors are not designed or manufactured for use in a device or system that is used under
circumstances in which human life is potentially at stake. Please contact Renesas Technology Corporation, Renesas Solutions
Corporation or an authorized Renesas Technology product distributor when considering the use of a product contained herein for any
specific purposes, such as apparatus or systems for transportation, vehicular, medical, aerospace, nuclear, or undersea repeater use.
z The prior written approval of Renesas Technology Corporation and Renesas Solutions Corporation is necessary to reprint or
reproduce in whole or in part these materials.
z If these products or technologies are subject to the Japanese export control restrictions, they must be exported under a license from
the Japanese government and cannot be imported into a country other than the approved destination. Any diversion or reexport
contrary to the export control laws and regulations of Japan and/or the country of destination is prohibited.
z Please contact Renesas Technology Corporation or Renesas Solutions Corporation for further details on these materials or the
products contained therein.
Precautions to be taken when using this product
z This product is a development supporting unit for use in your program development and evaluation stages. In mass-producing your
program you have finished developing, be sure to make a judgment on your own risk that it can be put to practical use by performing
integration test, evaluation, or some experiment else.
z In no event shall Renesas Solutions Corporation be liable for any consequence arising from the use of this product.
z Renesas Solutions Corporation strives to renovate or provide a workaround for product malfunction at some charge or without charge.
However, this does not necessarily mean that Renesas Solutions Corporation guarantees the renovation or the provision under any
circumstances.
z This product has been developed by assuming its use for program development and evaluation in laboratories. Therefore, it does not
fall under the application of Electrical Appliance and Material Safety Law and protection against electromagnetic interference when
used in Japan.
If the requirements shown in the "CAUTION" sentences are ignored,
the equipment may cause personal injury or damage to the products.
CAUTION
Rev.1.00
Jan. 16, 2007
(1/4)
REJ10J1364-0100
Download from Www.Somanuals.com. All Manuals Search And Download.
5. Connection Procedure (See Figure 3)
The procedure for connecting the R0E5212BACFG00 is shown
below.
R0E521000EPB00
or
R0E521000CPE00
R0E5212BACFG00
(1) Mount the NQPACK064SA160 on the user system.
(2) Attach the YQPACK064SA to the NQPACK064SA160.
(3) Secure the four corners of the YQPACK064SA with the
YQ-GUIDE's.
(4)
⑤
Be sure to use a
flathead screwdriver
● Do not use the screws included with the
YQ-GUIDE(×4)
YQPACK064SA for fixing the YQPACK064SA.
(3)
● The
screwdriver
included
with
the
YQPACK064SA
NQPACK064SA160 is used for fixing the
HQPACK064SA160. Do not use it for fixing the
YQ-GUIDE's.
(2)
NQPACK064SA160
(4) Attach the R0E521000EPB00 or R0E521000CPE00 to the
R0E5212BACFG00.
(1)
(5) Attach the R0E5212BACFG00 to the YQPACK064SA.
64-pin 0.8mm pitch
(PLQP0064GA-A) foot pattern
Figure 3 Connection procedure of the R0E5212BACFG00
6. External Dimensions and a Sample Foot Pattern (See Figure 4)
35.0
0.5
R0E5212BACFG00 REV.A
MADE IN JAPAN
0.8
13.2
17.2
Unit: mm
Figure 4 External dimensions and a sample foot pattern of the R0E5212BACFG00
(3/4)
Download from Www.Somanuals.com. All Manuals Search And Download.
7. Precautions
CAUTION
Cautions to Be Taken for This Product:
z Do not pull or excessively flex the cable. The cable may cause a break.
z When connecting the YQPACK064SA, be sure to use the included YQ-GUIDE's.
z Do not use the screws included with the YQPACK064SA to fix it.
IMPORTANT
Notes on This Product:
z We cannot accept any request for repair.
z For purchasing the NQPACK064SA160, YQPACK064SA and HQPACK064SA160, contact the following:
Tokyo Eletech Corporation
z For inquiries about the product or the contents of this manual, contact your local distributor.
Renesas Tools Homepage
(4/4)
Download from Www.Somanuals.com. All Manuals Search And Download.
|