PCA7412F-100
PCA7412L-100
PCA7412G-100
PCA7413F-80
PROM Programming Adapters for M16C/60 Series
User's Manual
Rev. 1.00
July 1, 2003
REJ10J0193-0100Z
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
1. Precautions for Safety.........................................................................................................4
1.1 Safety Symbols and Meanings ..............................................................................4
2. Introduction ........................................................................................................................6
2.1 Things to Check When Unpacking .......................................................................6
3. How to Write the Program .................................................................................................7
3.1 Programming Procedures ......................................................................................7
3.2 Attaching the Adapter to a PROM Programmer ...................................................8
3.3 Setting the Switch .................................................................................................9
3.4 Inserting an MCU into the Adapter.....................................................................10
3.5 Setting Programming Area..................................................................................12
3.6 Recommended PROM Programmers ..................................................................13
4. Specifications ...................................................................................................................14
4.1 Specifications ......................................................................................................14
4.2 Memory Maps .....................................................................................................15
5. Troubleshooting................................................................................................................17
5.1 Errors That Occur When Writing to PROM .......................................................17
(1) When Newly Purchased ...........................................................................17
(2) Previously Written Normally ...................................................................17
5.2 When MCUs Do Not Function Normally ...........................................................17
5.3 Other Precautions ................................................................................................18
(1) About the Recommended PROM Programmers ......................................18
(2) About Reading Out of Device Identification Code ..................................18
5.4 How to Request for Support................................................................................18
( 3 / 20 )
Download from Www.Somanuals.com. All Manuals Search And Download.
1. Precautions for Safety
In both the user's manual and on the product itself, several icons are used to insure proper handling
of this product and also to prevent injuries to you or other persons, or damage to your properties.
This chapter describes the precautions which should be taken in order to use this product safely and
properly. Be sure to read this chapter before using this product.
1.1 Safety Symbols and Meanings
If the requirements shown in the "WARNING"
sentences are ignored, the equipment may
cause serious personal injury or death.
WARNING
If the requirements shown in the "CAUTION"
sentences are ignored, the equipment may
malfunction.
CAUTION
It means important information on using this
product.
IMPORTANT
In addition to the three above, the following are also used as appropriate.
means WARNING or CAUTION.
Example:
CAUTION AGAINST AN ELECTRIC SHOCK
means PROHIBITION.
Example:
DISASSEMBLY PROHIBITED
means A FORCIBLE ACTION.
Example:
UNPLUG THE POWER CABLE FROM THE RECEPTACLE.
The following pages describe the symbols "WARNING", "CAUTION", and "IMPORTANT".
( 4 / 20 )
Download from Www.Somanuals.com. All Manuals Search And Download.
WARNING
Warning for Use Environment:
• This equipment is to be used in an environment with a maximum ambient temperature of 35˚C. Care
should be taken that this temperature is not exceeded.
• Select the proper programming mode of the PROM programmer.
CAUTION
Caution to Be Taken for Modifying This Product:
• Do not disassemble or modify this product. Disassembling and modifying the product will void
your warranty.
Cautions to Be Taken for This Product:
• Use caution when handling this product. Be careful not to apply a mechanical shock such as falling.
• Do not directly touch the connector pins of this product.
• Be careful with the static electricity when handling this product and MCUs.
When Not Using This Product for a Long Time:
(1) Attach the connector pins of this product to the conductive sponge.
(2) Put it into a conductive polyvinyl, and keep it in the package case shipped from the factory.
(3) Store it in the place where humidity and temperature are low and direct sunshine does not strike.
IMPORTANT
Note on This Product:
• We cannot accept any request for repair.
When Using This Product:
• Attach this product to the IC socket on the PROM programmer properly.
• Insert the MCU to the IC socket of this product properly.
• When opening and closing the IC socket of this product, be sure to keep it horizontal.
• Be sure to set the programming area as described in this user's manual.
• Do not use the PROM programmer's device identification code readout function.
( 5 / 20 )
Download from Www.Somanuals.com. All Manuals Search And Download.
2. Introduction
This product is a PROM programming adapter for the Renesas M16C/60 Series of 16-bit MCUs. The
adapter is a tool that can be used to write programs into internal PROM of an MCU using a PROM
programmer commercially available. This user's manual describes specifications of the PCA7412F-
100, PCA7412L-100, PCA7412G-100 and PCA7413F-80 and how to use them.
Figure 2.1 shows the external view of the PROM programming adapter and its constituent parts.
Figure 2.1 External view of the programming adapter and its constituent parts
2.1 Things to Check When Unpacking
This product package consists of the following parts. Check to see that it contains all the parts shown
in Table 2.1 below.
Table 2.1 Contents
PCA7412F-100
package
PCA7412L-100
package
PCA7412G-100
package
PCA7413F-80
package
Main unit
Interface unit
Connector
PCA7412F-100
PCA7412L-100
PCA7412G-100
PCA7412C
PCA7413F-80
PCA7412B
PCA7412B
PCA7476E (32-pin)
PCA7402E (32-pin) PCA7476E (32-pin)
User's
Manual
PROM Programming Adapters for M16C/60 Series User's Manual
(This manual)
If any part is missing or there is any doubt about your product package, contact your local distributor.
( 6 / 20 )
Download from Www.Somanuals.com. All Manuals Search And Download.
3. How to Write the Program
This chapter describes how to write programs with a PROM programmer. For the operation of the
PROM programmer, refer to the user's manual of the PROM programmer.
3.1 Programming Procedures
Follow these procedures (1) through (8) to write programs into the MCU.
(1) Read the program.
1) For M306V0EE, M306V2EE
• OSD ROM, internal ROM: offset (80000h) required
2) For M306XXEC
• Internal ROM: offset (C0000h) required
3) For other MCUs
• Internal ROM: offset (E0000h) required
Read the program into the PROM programmer.
(2) Attach the adapter to the PROM programmer. (See section 3.2)
(3) Set the JP1 switch. (See section 3.3)
(4) Insert the MCU into the adapter. (See section 3.4)
(5) Set the programming area. (See section 3.5) *1
Set the MCU's programming area with the PROM programmer.
(6) Check to erase the programming area. *2
Using the PROM programmer's erase check function, check whether data can be written into
the MCU's programming area.
(7) Write the program into the MCU. *2
Write the program into the programming area of the MCU using the PROM programmer.
(8) Check to verify the programming area. *2
Check to verify the programming area of the MCU using the PROM programmer. Check
whether the program is written into the MCU correctly.
Notes:
*1 Be sure to set the programming area. Otherwise the mode's shift to the programming mode may
not be performed successfully. The erase check function etc. may not also be performed
completely.
*2 Some PROM programmers perform the steps (6) through (8) automatically.
( 7 / 20 )
Download from Www.Somanuals.com. All Manuals Search And Download.
3.2 Attaching Adapter to PROM Programmer
As shown in Figure 3.1, attach the pin No. 1 of the PROM programmer connector, PCA7402E or
PCA7476E (standard-pitch 32-pin pin-header mounted) to the No.1 pin of the IC socket of the PROM
programmer.
Be careful when attaching to the PROM programmer because an incorrect
insertion can cause fatal damage to the MCU.
Figure 3.1 Attaching the adapter to a PROM programmer
( 8 / 20 )
Download from Www.Somanuals.com. All Manuals Search And Download.
3.3 Setting the Switch
The position of the JP1 and its default setting are shown in Figure 3.2. For how to set the switch, see
Table 3.1.
Top view
Figure 3.2 Position of the JP1 switch
Table 3.1 Setting the JP1 switch
Group
Other than M16C/6V
M16C/6V
Example
JP1
1M
4M
M30612E4-XXXFP
M306V2EEFP
CAUTION
Cautions for Setting the Switch:
• Make the setting properly, because an incorrect setting can cause fatal damage to the
MCU.
• Select the proper programming mode of the PROM programmer.
• An example setting shown in Figure 3.2 is also applied to the PCA7412L-100,
PCA7412G-100, and PCA7413F-80.
• To use this product in M27C201 mode, set the JP1 switch to the 1M side.
( 9 / 20 )
Download from Www.Somanuals.com. All Manuals Search And Download.
3.4 Inserting an MCU into the Adapter
As shown in Figure 3.3, insert the MCU into the IC socket aligning the No. 1 pin. This also applies
to the PCA7412L-100, PCA7412G-100, and PCA7413F-80.
Be careful when inserting the MCU because an incorrect insertion can cause fatal
damage to the MCU.
Top view
Figure 3.3 Inserting an MCU
( 10 / 20 )
Download from Www.Somanuals.com. All Manuals Search And Download.
CAUTION
Caution to Be Taken for Handling an MCU:
• Do not touch the connector in the IC socket and the pins on the PROM programmer
connector. Otherwise it can cause an electrical insulation failure because of dirt.
When not using, attach the connector pins of this product to the conductive sponge
as it was shipped from the factory.
Caution When Opening and Closing the IC Socket:
• When opening and closing the IC socket, hold the adapter horizontally as shown in
Figure 3.4. Otherwise the inside of the IC socket may become damaged and cause
an electrical insulation failure.
Side view
Figure 3.4 Opening the IC socket
( 11 / 20 )
Download from Www.Somanuals.com. All Manuals Search And Download.
3.5 Setting Programming Area
To write programs into the MCU, be sure to set the programming area. And also, specify a device by
the PROM programmer. For programming areas and devices, see Tables 3.2 and 3.3.
Table 3.2 List of programming areas (other than M16C/6V)
MCU
PROM programmer
Programming
area
ROM area
of MCU
ROM size
32 KB
Type name
M306XXE4
Example
Device
M30612E4FP
M30613E4TGP
M30600E8FP
18000h--1FFFFh F8000h--FFFFFh
M5M27C101
M306XXE8
M306XXEA
M306XXEC
64 KB
96 KB
10000h--1FFFFh F0000h--FFFFFh
08000h--1FFFFh E8000h--FFFFFh
N/A
M30610ECFP
128 KB
M5M27C201 20000h--3FFFFh E0000h--FFFFFh
Table 3.3 List of programming areas (M16C/6V)
MCU
PROM programmer
ROM area
ROM size
Programming
area
of MCU
Type name
M306VXEE
Example
Device
OSD ROM
(128 KB)
10000h--2FFFFh 90000h--AFFFFh
50000h--7FFFFh D0000h--FFFFFh
M5M27C401
M306V2EEFS
Internal ROM
(192 KB)
CAUTION
When Setting a Programming Area:
• Specify a proper programming mode, because an incorrect setting can cause fatal
damage to the MCU.
• The programming method for M5M27C101, M5M27C201 or M5M27C401 mode
is the byte-programming method.
• The MCUs listed above are shown as examples. Therefore, some MCUs may not be
available in the future.
( 12 / 20 )
Download from Www.Somanuals.com. All Manuals Search And Download.
3.6. Recommended PROM Programmers
The PROM programmers listed in Table 3.4 are recommended for the adapters. Using the actual
products, we have verified that these PROM programmers can be used to write programs without
problem. For the latest types of PROM programmers from Advantest, please contact the company
to confirm whether it can be used for your product.
Table 3.4 Recommended PROM programmers
Manufacturer
Type name
Device
Programming voltage (Vpp)
12.5 V
M5M27C101 mode
M5M27C201 mode
M5M27C401 mode
M5M27C101 mode
M5M27C201 mode
M5M27C401 mode
R4945
12.75 V
12.5 V
Advantest
Corporation
R4945A
12.75 V
CAUTION
Regarding Recommended PROM Programmers:
• Specify the proper programming mode, because an incorrect setting can cause fatal
damage to the MCU.
• The programming method for M5M27C101, M5M27C201 or M5M27C401 mode
is the byte-programming method.
( 13 / 20 )
Download from Www.Somanuals.com. All Manuals Search And Download.
4. Specifications
4.1 Specifications
Tables 4.1 lists common specifications of the programming adapters, and Table 4.2 individual
specifications.
Table 4.1 Common specifications
8 MHz
Operating clock frequency
Power supply
(Supplied by the ceramic oscillator mounted on the adapter)
Supplied from Vcc of the PROM programmer
Board to insert a programmable MCU
(IC socket for MCU mounted on it)
Main unit
Interface board
Interface unit
(PCA7412B or
PCA7412C)
Board
configuration
(Connected by two rows of standard-pitch 18-pin connectors
and two rows of standard-pitch 16-pin connectors to the
upper and lower boards)
Connector
(PCA7402E or
PCA7476E)
Board to connect to the PROM programmer
(Standard-pitch 32-pin pin-header mounted)
Table 4.2 Individual specifications
Product name
Item
Description
M16C/60 Series 100-pin QFP (100P6S-A)
e.g. M30600E8FP
MCU
PCA7412F-100
IC51-1004-814-6 (made by Yamaichi Electronics Co. Ltd.)
EPROM
IC socket
Internal ROM type
M16C/60 Series 100-pin LCC (100D0)
e.g. M30600E8FS
MCU
PCA7412L-100
PCA7412G-100
PCA7413F-80
IC51-1004-804 (made by Yamaichi Electronics Co. Ltd.)
EPROM
IC socket
Internal ROM type
M16C/60 Series 100-pin QFP (100P6Q-A)
e.g. M30600E8GP
MCU
IC51-1004-809 (made by Yamaichi Electronics Co. Ltd.)
EPROM
IC socket
Internal ROM type
M16C/60 Series 80-pin QFP (80P6S-A)
e.g. M30601E8GP
MCU
IC socket
IC51-804-711 (made by Yamaichi Electronics Co. Ltd.)
EPROM
Internal ROM type
Note: As this product is designed to support the same packages of the M16C/60 Series, it is ready
for most of the products which will be introduced in the future.
( 14 / 20 )
Download from Www.Somanuals.com. All Manuals Search And Download.
4.2 Memory Maps
Figure 4.1 shows memory maps of the MCU (M306V0EE and M306V2EE) and the PROM
programmer. Figure 4.2 shows memory maps of the other MCUs and the PROM programmer.
MCU
00000h
PROM programmer
Unused area
Offset: 80000h
00000h
Unused area
OSD ROM area
Unused area
8FFFFh
90000h
0FFFFh
10000h
OSD ROM area
Unused area
AFFFFh
B0000h
2FFFFh
30000h
CFFFFh
D0000h
4FFFFh
50000h
Internal ROM area
Programming area
FFFFFh
7FFFFh
Figure 4.1 Memory maps (M306V0EE and M306V2EE)
( 15 / 20 )
Download from Www.Somanuals.com. All Manuals Search And Download.
MCU
PROM programmer
00000h
00000h
Unused area
Unused area
YYYYYh
FFFFFh
XXXXXh
ZZZZZh
Internal ROM area
Programming area
ROM areas
Address YYYYY Address XXXXX
ROM size (byte)
Address ZZZZZ
E4: About 32K
E8: About 64K
EA: About 96K
EC: About 128K
F8000h
F0000h
E8000h
E0000h
18000h
10000h
08000h
20000h
1FFFFh
1FFFFh
1FFFFh
3FFFFh
Figure 4.2 Memory map (other MCUs)
( 16 / 20 )
Download from Www.Somanuals.com. All Manuals Search And Download.
5. Troubleshooting
The table below summarizes errors to be checked carefully before you determine them to be a fault.
5.1 Errors That Occur When Writing to PROM
(1) When Newly Purchased
Remedy
Cause
See page
8
Is the adapter attached to the correct position of the PROM
programmer?
Programming adapter
Is the switch on the PROM programmer set properly?
Is the MCU attached to the correct position?
Is the area specification set correctly?
Is the correct device selected?
9
10
12
13
PROM programmer
Contact failure
The IC socket of the PROM programmer may be stained. The
socket needs replacing.
-
(2) Previously Written Normally
Remedy
Cause
See page
8
Is the adapter attached to the correct position of the PROM
programmer?
Programming adapter
PROM programmer
Contact failure
Is the switch on the PROM programmer set properly?
Is the MCU attached to the correct position?
Is the area specification set correctly?
Is the correct device selected?
9
10
12
13
The IC socket of the PROM programmer may be stained. The
socket needs replacing.
-
-
The PROM programmer connector at which the PROM
programmer is contacted may be stained. Clean it with
alcohol, etc.
5.2 When MCUs Do Not Function Normally
If the program operates normally on the emulator, but when the MCU that has normally been written
is attached the same program does not function normally.
(1) Is the offset address specified correctly when copying data into the PROM programmer?
(2) In the emulator, NOPs are often inserted in the area where the program has not been read, therefore
the program happens to appear functioning normally even though it may have gone wild. Check
your program again.
(3) The emulator and the actual MCU may differ in characteristics. Consult the user's manual of the
emulation pod to check for differences in characteristics again.
( 17 / 20 )
Download from Www.Somanuals.com. All Manuals Search And Download.
5.3 Other Precautions
(1) About the Recommended PROM Programmers
Not all PROM programmers available on the market can be checked to see if they function properly.
There are several PROM programmers that we have verified to function properly. These products are
listed as recommended PROM programmers in this user's manual. Other PROM programmers may
also be used providing that you verified them to function properly.
Note: No matter which type of the PROM programmer you use, it is necessary to verify completion
of programming by executing screening, etc. that are stipulated for each MCU used.
(2) About Reading Out of Device Identification Code *1
Please do not use the PROM programmer's device identification code readout function.
Using this function may break down the MCU. The device identification code is included in EPROM
to indicate the manufacturer code and device code; it is not included in the MCU.
*1 Depending on PROM programmer manufacturers, this may be referred to by another name (e.g.
ID code).
5.4 How to Request for Support
After checking this manual, fill in the following information and email to your local distributor.
For prompt response, please specify the following information:
(1) Contact address
• Company name
• Department
• Responsible person
• Phone number
• Fax number
• E-mail address
(2) Product information
• Name of the programming adapter
• Serial number
• Date of purchase
• Target MCU
• Symptoms (Fails blank check/Cannot write a program/Fails verification etc.)
• Detailed symptoms
• Frequency of the problem (2 out of 10 etc.)
• When did the problem start to occur? (Since purchase/Used to work correctly)
• Type name of the PROM programmer (Advantest R4945A etc.)
• Specified device when writing to PROM (M27C101 etc.)
• Specified programming area when writing to PROM
• Switch settings of the adapter when writing to PROM
( 18 / 20 )
Download from Www.Somanuals.com. All Manuals Search And Download.
PROM Programming Adapters for M16C/60 Series User's Manual
Rev. 1.00
July 1, 2003
REJ10J0193-0100Z
COPYRIGHT ©2003 RENESAS TECHNOLOGY CORPORATION
AND RENESAS SOLUTIONS CORPORATION ALL RIGHTS RESERVED
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
|