Renesas Network Card M38B59EFFP User Guide

PCA7438F-80A  
PCA7438L-80A  
PROM Programming Adapter for M38B59EFFP/M38B59EFFS  
User's Manual  
Rev.1.00  
August 1, 2003  
REJ10J0245-0100Z  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Contents  
1. Precautions for Safety.........................................................................................................4  
1.1 Safety Symbols and Meanings ..............................................................................4  
2. Introduction ........................................................................................................................6  
2.1 Things to Check When Unpacking .......................................................................6  
3. Specifications .....................................................................................................................7  
4. How to Write the Program .................................................................................................8  
4.1 Programming Procedures ......................................................................................8  
4.2 Selecting a PROM Programmer Connector ..........................................................9  
4.3 Setting the Jumper Switches ...............................................................................10  
4.4 Attaching the Adapter to a PROM Programmer .................................................11  
4.5 Inserting an MCU into the Programming Adapter..............................................12  
4.6 Precautions When Opening and Closing the IC Socket ......................................12  
4.7 Precautions When Handling the Adapter ............................................................12  
4.8 Setting a Programming Area ...............................................................................13  
5. Recommended PROM Programmers ...............................................................................13  
6. How to Request for Support .............................................................................................13  
7. Memory Maps ..................................................................................................................14  
To Use the Product Properly  
Precautions for Safety:  
• Either in the User's Manual or on the product, several icons are used to insure proper  
handling of this product and also to prevent injuries to you or other persons, or  
damage to your properties.  
• Their graphic images and meanings are given in Chapter 1, Precautions for Safety.  
Be sure to read this chapter before using the product.  
( 3 / 16 )  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1. Precautions for Safety  
In this user's manual, several icons are used to insure proper handling of this product and also to  
prevent injuries to you or other persons, or damage to your properties.  
This chapter describes precautions which should be taken in order to use this product safely and  
properly. Be sure to read this chapter before using this product.  
1.1 Safety Symbols and Meanings  
If the requirements shown in the "WARNING"  
sentences are ignored, the equipment may  
cause serious personal injury or death.  
WARNING  
If the requirements shown in the "CAUTION"  
sentences are ignored, the equipment may  
malfunction.  
CAUTION  
It means important information on using this  
product.  
IMPORTANT  
In addition to the three above, the following are also used as appropriate.  
means WARNING or CAUTION.  
Example:  
CAUTION AGAINST AN ELECTRIC SHOCK  
means PROHIBITION.  
Example:  
DISASSEMBLY PROHIBITED  
means A FORCIBLE ACTION.  
Example:  
UNPLUG THE POWER CABLE FROM THE RECEPTACLE.  
The following pages describe the symbols "WARNING", "CAUTION", and "IMPORTANT".  
( 4 / 16 )  
Download from Www.Somanuals.com. All Manuals Search And Download.  
WARNING  
Warnings for Use Environment:  
• This equipment is to be used in an environment with a maximum ambient temperature of 35°C. Care  
should be taken that this temperature is not exceeded.  
• Select the proper programming mode of the PROM programmer.  
CAUTION  
Cautions in Handling This Product:  
• Do not disassemble or modify this product. Personal injury due to electric shock may occur if this  
product is disassembled or modified.  
• Use caution when handling this product. Be careful not to apply a mechanical shock such as falling,  
etc.  
• Do not directly touch the connector pins of this product.  
• Be careful with the static electricity when handling this product and the MCU.  
Caution in Keeping This Product:  
• When not using this product for a long time:  
(1) Attach the connector pins of this product to the conductive sponge.  
(2) Put it into a conductive polyvinyl, and keep it in the package case shipped from the factory.  
(3) Store it in the place where humidity and temperature are low and direct sunshine does not  
strike.  
IMPORTANT  
When Using this Product:  
• Attach this product to the IC socket on the PROM programmer properly.  
• Insert the MCU to the IC socket of this product properly.  
• When opening and closing the IC socket, hold the adapter horizontally.  
• Be sure to set the programming area as described in this user's manual.  
• Do not use the PROM programmer's device identification code readout function.  
( 5 / 16 )  
Download from Www.Somanuals.com. All Manuals Search And Download.  
2. Introduction  
The PCA7438F-80A and PCA7438L-80A are PROM programming adapters for 8-bit 38000 Series  
MCUs. These adapters are tools that can be used to write a program into internal PROM of MCUs  
using a commercially available PROM programmer.  
This manual describes the specifications and the operation of the PCA7438F-80A/PCA7438L-80A.  
Figure 2.1 shows the external view and the constituent parts of them.  
Figure 2.1 External view of the PCA7438F-80A/PCA7438L-80A and their constituent parts  
2.1 Things to Check When Unpacking  
The PCA7438F-80A/PCA7438L-80A consist of the following items. Check to see that it contains  
all of the components shown in Table 2.1.  
Table 2.1 Contents of the PCA7438F-80A/PCA7438L-80A  
Main unit  
Interface unit  
PCA7438F-80A/PCA7438L-80A  
PCA7402B  
PROM programer connector  
PCA7402D (28-pin)  
PCA7402E (32-pin)  
User's Manual  
This user's manual  
If any part is missing or there is any doubt about your product package, contact your local distributor.  
( 6 / 16 )  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3. Specifications  
Tables 3.1 and 3.2 list the specifications of the PCA7438F-80A and PCA7438L-80A respectively.  
Table 3.1 Common specifications of the PCA7438F-80A  
Applicable MCU  
M38B59EFFP  
Operating clock frequency  
4 MHz  
(Supplied by the ceramic oscillator mounted on the PCA7438F-80A)  
Power supply  
MCU socket  
Supplied from the Vcc of the PROM programmer  
IC51-0804-819-6 (made by Yamaichi Electronics Co., Ltd.)  
A programmable MCU mounted  
(IC socket for 80-pin QFP mounted)  
PCA7438F-80A  
Interface board (buffer IC mounted)  
(Connected by two rows of standard-pitch 18-pin connectors and two  
rows of standard-pitch 16-pin connectors to the upper and lower  
boards)  
PCA7402B  
Board  
configuration  
Board to be connected to the PROM programmer (for 256K bit mode)  
(Standard-pitch 28-pin pin-header to be connected to the PROM  
programmer mounted)  
PCA7402D  
PCA7402E  
Board to be connected to the PROM programmer (for 1M bit mode)  
(Standard-pitch 32-pin pin-header to be connected to the PROM  
programmer mounted)  
Note: The PCA7438F-80A is designed to support 38000 Series 80-pin QFP packages (80P6N-A),  
and it is basically compatible with the future variations of the MCU series.  
Table 3.1 Common specifications of the PCA7438L-80A  
Applicable MCU  
M38B59EFFS  
Operating clock frequency  
4 MHz  
(Supplied by the ceramic oscillator mounted on the PCA7438L-80A)  
Power supply  
MCU socket  
Supplied from the Vcc of the PROM programmer  
IC51-0804-890 (made by Yamaichi Electronics Co., Ltd.)  
A programmable MCU mounted  
(IC socket for 80-pin LCC mounted)  
PCA7438L-80A  
Interface board (buffer IC mounted)  
(Connected by two rows of standard-pitch 18-pin connectors and two  
rows of standard-pitch 16-pin connectors to the upper and lower  
boards)  
PCA7402B  
Board  
configuration  
Board to be connected to the PROM programmer (for 256K bit mode)  
(Standard-pitch 28-pin pin-header to be connected to the PROM  
programmer mounted)  
PCA7402D  
PCA7402E  
Board to be connected to the PROM programmer (for 1M bit mode)  
(Standard-pitch 32-pin pin-header to be connected to the PROM  
programmer mounted)  
Note: The PCA7438L-80A is designed to support 38000 Series 80-pin LCC packages (80D0), and  
it is basically compatible with the future variations of the MCU series.  
( 7 / 16 )  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4. How to Write the Program  
This chapter describes how to write programs using a PROM programmer. For details on how to  
operate the PROM programmer, refer to the user's manual of the PROM programmer.  
4.1 Programming Procedures  
Follow procedures (1) to (9) to write programs into the MCU.  
(1) Read the program into the PROM programmer (800016 offset required).  
(2) Select a PROM programmer connector (PCA7402D or PCA7402E). (See Section 4.2)  
(3) Attach the adapter to the PROM programmer. (See Section 4.4)  
(4) Set the jumper switches (SW1, SW2 and SW3). (See Section 4.3)  
(5) Insert the MCU into the adapter. (See Section 4.5)  
(6) Specify the programming area of the MCU using the PROM programmer. (See Section 4.8)  
(7) Using the PROM programmer's erase check function, check whether data can be written into  
the programming area of the MCU. *  
(8) Write the program into the programming area of the MCU using the PROM programmer. *  
(9) Verify the programming area of the MCU using the PROM programmer to check whether the  
program is written into the MCU correctly. *  
Notes:  
* Some PROM programmers perform the steps (7) through (9) automatically.  
* Be sure to set the programming area. Otherwise the mode's shift to the programming mode  
may not be performed successfully. The erase check function etc. may not also be performed  
completely.  
( 8 / 16 )  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4.2 Selecting a PROM Programmer Connector  
Select a PROM programmer connector (PCA7402D or PCA7402E) according to the ROM capacity  
of your MCU.  
(1) For MCU 32KB or less:  
PCA7402D (for 256K bit mode)  
(2) For MCU 32KB or more: PCA7402E (for 1M bit mode)  
e.g.) For the M38B59EFFP and M38B59EFFS, use the PCA7402E.  
Figure 4.1 shows the PROM programmer connectors.  
Figure 4.1 Selecting a PROM programmer connector  
( 9 / 16 )  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4.3 Setting the Jumper Switches  
(1) Jumper switch SW1  
Set the SW1 according to the output type of MCU's ports P20 - P23 (data buses D0-D3, No. 64-61  
pins). For setting, see Table 4.1 and Figure 4.2.  
• Ports P20 - P23: CMOS output ..............................................................................SW1: CMOS  
• Ports P20 - P23: Pch output ...................................................................................SW1: Pch  
• Ports P20 - P23: Nch output ..................................................................................SW1: Nch  
(2) Jumper switch SW2  
Set the SW2 according to the output type of MCU's ports P24 - P27 (data buses D4-D7, No. 60-57  
pins). For setting, see Table 4.1 and Figure 4.2.  
• Ports P24 - P27: CMOS output ..............................................................................SW2: CMOS  
• Ports P24 - P27: Pch output ...................................................................................SW2: Pch  
• Ports P24 - P27: Nch output ..................................................................................SW2: Nch  
(3) Jumper switch SW3  
How to set the SW3 is shown below.  
• When No. 12 pin of the MCU is dedicated to pin XCIN .................................................................. SW3: ON  
• When pin XCIN also serves as an I/O port (e.g. P41/XCIN) .....................................SW3: OFF  
• When there is no pin XCIN ............................................................................................................................................. SW3: OFF  
Table 4.1 Jumper switch settings  
MCU  
Example  
SW1  
Pch  
SW2  
Pch  
SW3  
OFF  
M38B5XEXFP  
M38B5XEXFS  
M38B59EFFP  
M38B59EFFS  
Note: SW1 ....... Pch  
SW2 ....... Pch  
SW3 ....... OFF  
Figure 4.2 Jumper switch settings  
( 10 / 16 )  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4.4 Attaching the Adapter to a PROM Programmer  
(1) For the PCA7402D  
Attach the pin No. 1 of the PCA7402D PROM programmer connector (standard-pitch 28-pin pin-  
header mounted) to the pin No. 1 of the IC socket of the PROM programmer.  
Be careful when attaching the adapter because incorrect insertion can cause fatal  
damage to the MCU.  
Same for the PCA7438L-80A  
Figure 4.3 Attaching the adapter to the PROM programmer (PCA7402D)  
(2) For the PCA7402E  
Attach the pin No. 1 of the PCA7402E PROM programmer connector (standard-pitch 32-pin pin-  
header mounted) to the pin No. 1 of the IC socket of the PROM programmer.  
Be careful when attaching the adapter because incorrect insertion can cause fatal  
damage to the MCU.  
Same for the PCA7438L-80A  
Figure 4.4 Attaching the adapter to the PROM programmer (PCA7402E)  
( 11 / 16 )  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4.5 Inserting an MCU into the Programming Adapter  
As shown in Figure 4.5, insert the MCU into the IC socket, with the pin No. 1 of the MCU matched  
to the pin No. 1 of the IC socket on the PCA7438F-80A/PCA7438L-80A.  
Be careful when inserting the MCU because incorrect insertion can cause fatal  
damage to the MCU.  
Top view  
Same for the PCA7438L-80A  
Figure 4.5 Inserting an MCU  
4.6 Precautions When Opening and Closing the IC Socket  
When opening and closing the IC socket, hold the adapter horizontally as shown in Figure 4.6.  
Otherwise the inside of the IC socket may become damaged and cause an electrical insulation failure.  
Figure 4.6 Holding the adapter in a horizontal position  
4.7 Precautions When Handling the Adapter  
Do not touch the connector in the IC socket and the pins on the PROM programmer connector,  
otherwise it cause an electrical insulation failure because of dirt.  
When not using, attach the connector pins of this product to the conductive sponge as it was shipped  
from the factory.  
( 12 / 16 )  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4.8 Setting a Programming Area  
When writing the program into the MCU, be sure to set the programming area. And also, specify its  
device of the PROM programmer.  
Table 4.2 Programming area  
PROM programmer  
Programming area  
of the MCU  
MCU type  
MCU area  
Device name  
Programming area  
M38B59EFFP  
M38B59EFFS  
Internal ROM  
area  
M5M27C101  
0108016 - 0FFFD16  
108016 - FFFD16  
5. Recommended PROM Programmers  
The PROM programmers listed in Table 5.1 are recommended for this product. Using the actual  
products, we have verified that these PROM programmers can be used to write programs without  
problem. Nonconformity occurring by using any other PROM programmers can not be supported.  
For the latest type of PROM programmers, contact the manufacturer to confirm whether it can be used  
for your product.  
Table 5.1 Recommended PROM programmers  
Type name  
R4944A  
R4945  
Device name  
Programming voltage (Vpp)  
12.5 V  
Manufacturer  
Advantest  
M5M27C101 mode  
R4945A  
* Be sure to select "Mitsubishi" when specifying the manufacturer for the device.  
6. How to Request for Support  
After checking this manual, fill in the following information and email to your local distributor.  
For prompt response, please specify the following information:  
(1) Contact address  
• Company name  
• Department  
• Responsible person  
• Phone number  
• Fax number  
• E-mail address  
(2) Product information  
• Name of the programming adapter  
• Serial number  
• Date of purchase  
• Target MCU  
• Symptoms (Fails blank check/Cannot write a program/Fails verification etc.)  
• Detailed symptoms  
• How often does the problem occur? (2 out of 10 etc.)  
• When did the problem start to occur? (Since purchase/Used to work correctly)  
• Type name of the PROM programmer (Advantest R4945A etc.)  
• Specified device when writing to PROM (M27C101 etc.)  
• Specified programming area when writing to PROM  
• Switch settings of the adapter when writing to PROM  
( 13 / 16 )  
Download from Www.Somanuals.com. All Manuals Search And Download.  
7. Memory Maps  
Figure 7.1 shows memory maps of the MCU and the PROM programmer.  
0000016  
000016  
Unused area  
0FFF16  
100016  
Reserved ROM area  
107F16  
108016  
0107F16  
0108016  
Internal ROM area  
(60 KB)  
Programming area  
FFFD16  
FFFE16  
FFFF16  
0FFFD16  
0FFFE16  
Unused area  
1FFFF16  
MCU  
(M38B59EFFP)  
(M38B59EFFS)  
PROM programmer  
(M5M27C101 mode)  
Figure 7.1 Memory maps  
( 14 / 16 )  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PCA7438F-80A/PCA7438L-80A User's Manual  
Rev.1.00  
August 1, 2003  
REJ10J0245-0100Z  
COPYRIGHT ©2003 RENESAS TECHNOLOGY CORPORATION  
AND RENESAS SOLUTIONS CORPORATION ALL RIGHTS RESERVED  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Download from Www.Somanuals.com. All Manuals Search And Download.  

QSC Audio Home Theater System CM16a User Guide
RAD Data comm Network Card IPmux 1 User Guide
RCA MP3 Player TH20 User Guide
Samsung Blood Pressure Monitor BVM 1007 User Guide
Sanyo Air Conditioner 42TW72R User Guide
Sanyo Universal Remote RMT U340A User Guide
Sears Lawn Mower 50225502 User Guide
Sebo Vacuum Cleaner Airbelt D User Guide
SECO LARM USA Door SK 1011 SQ User Guide
Sennheiser Headphones 502874 User Guide