PCA7414
PROM Programming Adapter for M34551E8FP
User's Manual
Rev.1.00
September 1, 2003
REJ10J0338-0100Z
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
1. Precautions for Safety ..........................................................................................................................4
1.1 Safety Symbols and Meanings ...............................................................................................................................4
2. Introduction..........................................................................................................................................6
2.1 Things to Check When Unpacking.........................................................................................................................6
3. Specifications.......................................................................................................................................7
4. How to Write the Program ..................................................................................................................8
4.1 Programming Conditions........................................................................................................................................8
4.2 Programming Procedure .........................................................................................................................................8
4.3 Attaching Adapter to PROM Programmer .............................................................................................................9
4.4 Inserting MCU into Programming Adapter..........................................................................................................10
4.5 Precautions When Opening and Closing IC Socket.............................................................................................10
4.6 Precautions When Handling Adapter ...................................................................................................................10
5. Recommended PROM Programmer ..................................................................................................11
6. How to Request for Support................................................................................................................12
To Use the Product Properly
Precautions for Safety
• Either in the User's Manuals or on the product, several icons are used to insure
proper handling of this product and also to prevent injuries to you or other
persons, or damage to your properties.
• Their graphic images and meanings are given in Chapter 1, Precautions for Safety.
Be sure to read this chapter before using the product.
(3 / 14)
Download from Www.Somanuals.com. All Manuals Search And Download.
1. PRECAUTIONS FOR SAFETY
In this User's Manual, several icons are used to insure proper handling of this product and also to prevent
injuries to you or other persons, or damage to your properties.
This chapter describes precautions which should be taken in order to use this product safely and properly.
Be sure to read this chapter before using this product.
1.1 SAFETY SYMBOLS AND MEANINGS
If the requirements shown in the "WARNING"
sentences are ignored, the equipment may
cause serious personal injury or death.
WARNING
If the requirements shown in the "CAUTION"
sentences are ignored, the equipment may
malfunction.
CAUTION
NOTE: It means important information on us-
IMPORTANT
ing this product.
In addition to the three above, the following are also used as appropriate.
means WARNING or CAUTION.
Example :
CAUTION AGAINST AN ELECTRIC SHOCK
means PROHIBITION.
Example :
DISASSEMBLY PROHIBITED
means A FORCIBLE ACTION.
UNPLUG THE POWER CABLE FROM THE
Example :
RECEPTACLE.
The following pages describe the symbols "WARNING", "CAUTION", and "IMPORTANT".
(4 / 14)
Download from Www.Somanuals.com. All Manuals Search And Download.
WARNING
Warning for Use Environment:
• This equipment is to be used in an environment with a maximum ambient
temperature of 35°C. Care should be taken that this temperature is not exceeded.
• Select the proper programming mode of the PROM programmer.
CAUTION
Cautions to Be Taken for This Product:
• Do not disassemble or modify this product. Personal injury due to electric shock
may occur if this product is disassembled or modified.
• Use caution when handling this product. Be careful not to apply a mechanical
shock such as falling, etc.
• Do not directly touch the connector pins of this product.
• Be careful with the static electricity when handling this product and the MCU.
Cautions for Keeping This Product:
• When not using this product for a long time,
(1) Attach the connector pins of this product to the conductive sponge.
(2) Put it into a conductive polyvinyl, and keep it in the package case shipped
from the factory.
(3) Store it in the place where humidity and temperature are low and direct
sunshine does not strike.
IMPORTANT
• Attach this product to the IC socket on the PROM programmer properly.
• Insert the MCU to the IC socket of this product properly.
• When opening and closing the IC socket of this product, be sure to keep it
horizontal.
• Do not use the PROM programmer's device identification code readout function.
(5 / 14)
Download from Www.Somanuals.com. All Manuals Search And Download.
2. INTRODUCTION
The PCA7414 is a programming adapter for 4-bit microcomputers of 4500 Series. The adapter is a tool
that can be used to write a program into internal PROM of microcomputers using a commercially available
PROM programmer.
This manual describes the specifications and the operation of the PCA7414.
Figure 2.1 shows the external view and constituent parts of the PCA7414.
Figure 2.1 External view of PCA7414 and its parts
2.1 THINGS TO CHECK WHEN UNPACKING
The PCA7414 consists of following parts and boards. Check to see that it contains all of the components
shown below.
Contents
• PCA7414 (Main unit)
× 1
× 1
× 1
× 1
• PCA7414B (Interface unit)
• PCA7402D (PROM programmer connector)
• PCA7414 Instruction Manual (This manual)
If any part is missing or there is any doubt about your product package, contact your nearest office
of Mitsubishi or its distributor.
(6 / 14)
Download from Www.Somanuals.com. All Manuals Search And Download.
3. SPECIFICATIONS
Table 3.1 lists specifications of the PCA7414.
Table 3.1 Specifications of PCA7414
Item
Description
MCU type
M34551E8FP
1 MHz
Operating clock frequency
(Supplied by the ceramic oscillator mounted on the PCA7414)
Supplied from Vcc of the PROM programmer
IC51-0484-652 (Made by Yamaichi Electronics Co., Ltd.)
Board to insert the programmable MCU
(IC socket for 48-pin QFP is mounted.)
Interface board
Power supply
IC socket
PCA7414
Board
PCA7414B
(Connected by two standard pitch 18-pin connectors and two standard
pitch 16-pin connectors to the upper and lower boards)
configuration
Board to be connected to the PROM programmer
PCA7402D
(Standard pitch 28-pin pin-header to be connected to the PROM pro-
grammer is mounted.)
(7 / 14)
Download from Www.Somanuals.com. All Manuals Search And Download.
4. HOW TO WRITE THE PROGRAM
This chapter describes programming conditions and the programming procedure with a PROM programmer.
For the operation of the PROM programmer, refer to the instructions of the PROM programmer.
4.1 PROGRAMMING CONDITIONS
Programming conditions are shown here below.
Device name of PROM programmers:
Programming voltage:
M5M27C256A (Made by Mitsubishi)
Vpp = 12.5V
4.2 PROGRAMMING PROCEDURE
Follow these procedures (1) through (6) to write the program into the MCU.
(1) Read the program.
Read the program into the PROM programmer.
(2) Attach the adapter to the PROM programmer. (See Section 4.3)
(3) Insert the MCU into the programming adapter. (See Section 4.4)
(4) Check to erase the programming area. *
Using the PROM programmer's erase check function, check whether
data can be written into the MCU's programming area.
(5) Write the program into the MCU. *
Write the program into the program area of the MCU using the PROM
programmer.
(6) Check to verify the programming area. *
Check to verify the programming area of the MCU using the PROM
programmer. Check whether the program is written into the MCU
correctly.
Note:
* Some PROM programmers perform the procedures (4) through (6) written above automatically.
(8 / 14)
Download from Www.Somanuals.com. All Manuals Search And Download.
4.3 ATTACHING ADAPTER TO PROM PROGRAMMER
Attach the pin No. 1 of the PCA7402D PROM programmer connector (Standard pitch 28-pin pin-
header mounted) to the specified pin of the IC socket of the PROM programmer.
Be careful when attaching the adapter because incorrect insertion can
cause fatal damage to the MCU.
These 4 pins are
NC (Non-connection).
Figure 4.1 Attaching adapter to PROM programmer
(9 / 14)
Download from Www.Somanuals.com. All Manuals Search And Download.
4.4 INSERTING MCU INTO PROGRAMMING ADAPTER
As shown in Figure 4.2, insert the MCU into the IC socket, with the pin No.1 of the MCU matched
to the pin No.1 of the IC socket on the PCA7414.
Be careful when inserting the MCU because incorrect insertion can cause
fatal damage to the MCU.
Top view
Pin No.1 of MCU
Figure 4.2 Inserting the MCU
4.5 PRECAUTIONS WHEN OPENING AND CLOSING IC SOCKET
When opening and closing the IC socket to insert the MCU, hold the adapter horizontally. Otherwise
the inside of the IC socket may become damaged and cause an electrical insulation failure. Figure
4.3 shows in diagrammatic form the opening and closing of the IC socket.
Side view
Figure 4.3 Opening and closing the IC socket
4.6 PRECAUTIONS WHEN HANDLING ADAPTER
Don't touch the connector in the IC socket and the pins on the PROM programmer connector lest
it cause an electrical insulation failure because of dirt.
(10 / 14)
Download from Www.Somanuals.com. All Manuals Search And Download.
5. RECOMMENDED PROM PROGRAMMER
The PROM programmers listed in Table 5.1 are recommended for the adapter. Using the actual products,
we have verified that these PROM programmers can be used to write programs without problem. Nonconformity
occurring by using any other PROM programmers can not be supported. For the latest type of PROM
programmers, contact the manufacturer to confirm whether it can be used for your product.
Table 5.1 Recommended PROM programmers
Manufacturer
Type name
TR4943
Device name
Programming voltage (Vpp)
M5L27256 mode
R4944A
R4945
M5M27C256 mode
M5M27C256A mode
12.5 V
Advantest
R4945A
(11 / 14)
Download from Www.Somanuals.com. All Manuals Search And Download.
6. How to Request for Support
After checking this manual, fill in the following information and email to your local distributor.
For prompt response, please specify the following information:
(1) Contact address
Company name
Department
Responsible person
Phone number
Fax number
E-mail address
(2) Product information
Name of the programming adapter
Serial number
Date of purchase
Target MCU
Symptoms (Fails blank check/Cannot write a program/Fails verification etc.)
Detailed symptoms
How often does the problem occur? (2 out of 10 etc.)
When did the problem start to occur? (Since purchase/Used to work correctly)
Type name of the PROM programmer (Advantest R4945A etc.)
Specified device when writing to PROM (M27C101 etc.)
Specified programming area when writing to PROM
Switch settings of the adapter when writing to PROM
(12 /14)
Download from Www.Somanuals.com. All Manuals Search And Download.
PCA7414 User's Manual
Rev.1.00
September 1, 2003
REJ10J0338-0100Z
COPYRIGHT ©2003 RENESAS TECHNOLOGY CORPORATION
AND RENESAS SOLUTIONS CORPORATION ALL RIGHTS RESERVED
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
|