Renesas Computer Hardware R8C 13 User Guide

Renesas Starter Kit for R8C/13  
Quick Start  
LCD module  
Application Board Interface  
Reset switch  
E8 header  
LCD module  
connector  
E8 emulator  
Application Board Interface  
Analog adjust  
User LEDs  
User switches  
D007054_11_S01_V04  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3. High-performance Embedded Workshop Workspace  
High-performance Embedded Workshop integrates various tools such as compiler, assembler, debugger and editor into a common graphical  
user interface. To learn more on how to user High-performance Embedded Workshop, open the High-performance Embedded Workshop  
manual installed on your computer (Start Menu > All Programs > Renesas > High-performance Embedded Workshop > Manual Navigator).  
17. Launch High-performance Embedded Workshop from the Start Menu. (Start Menu > All Programs > Renesas > High-performance  
Embedded Workshop > High-performance Embedded Workshop)  
18. In the Welcome” dialog box: Verify Create New Workspace” is selected. Click <OK>.  
19. In the New Project Workspace” dialog box: Set the CPU Family” to M16C, and verify the Tool chain” is set to Renesas M16C  
Standard. Select RSKR8C13” from the left hand pane.  
20. Enter a name for the workspace. The project name will be automatically completed with the Workspace name. You can change this  
name to Tutorial” if required. Click <OK>.  
21. On the RSKR8C13- Step 1” window: Select Tutorial” and click <Next>.  
22. On the RSKR8C13- Step 2” window: Click <Finish>.  
23. On the Project Generator Information window: Click <OK>.  
The project that is created has two configurations. The Release configuration can be used for the final release code version. The  
Debug configuration allows modifications to the configuration for debugging.  
24. Select the Debug build configuration in the left hand drop down list on the toolbar.  
25. Click on the Build” icon to compile, assemble and link the project.  
4. Programming and Debug  
26. Ensure the SessionR8C_E8_SYSTEM session in the right hand drop down list on the toolbar is selected.  
27. Click the <Connect> button on the debug toolbar.  
28. The Emulator mode” dialog will be shown. Select the correct device type  
(e.g. R5F21134 for RSKR8C13).  
Please note that the “Emulator mode” wizard shown here will only  
appear the FIRST time you connect to the target within a project. On  
subsequent connections the “Emulator setting” dialog will appear,  
please choose the same options to connect.  
29. Select Erase Flash and Connect.  
30. If the E8 is to provide power to the CPU board, select Power Target from  
E8” and choose the 5.0Voption.  
Otherwise connect a 5V centre positive supply.  
31. Click <Next>  
32. Ensure the Enable advanced setting” checkbox is cleared.  
33. Click <Next>, then <Finish>.  
D007054_11_S01_V04  
Download from Www.Somanuals.com. All Manuals Search And Download.  
The first time the E8 is used a warning message box Please choose  
driver” will be shown. Click <OK>.  
Otherwise skip to step 37.  
34. The Driver Details” dialog will be shown. Select Renesas E-Series  
USB Driver.  
35. After a short delay while the hardware is interrogated, select USB  
Interface. The channel number will vary.  
36. Click <Close>.  
37. Accept any dialogue warning that an older version of E8 firmware is necessary to work with the application. Allow download of firmware  
to complete, this may take several seconds.  
38. Right click on the download module listed in the left hand pane and  
select Download.  
The code will be downloaded to the microcontroller. This may take  
several seconds.  
39. Click the <Reset Go> button.  
The code will run and you will see the LEDs flash on the board.  
40. Click the <Stop> button.  
The code will stop and the source code will be opened at the current program counter.  
D007054_11_S01_V04  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5. Next Step  
After you have completed this quick start procedure, please review the tutorial code and sample code that came with the kit. You can add  
projects to the current workspace by selecting (Project > Insert Project) from the main menu. The tutorials will help you understand the  
device and development process using Renesas Development Tools.  
The Hardware manual supplied with this Renesas Starter Kit is current at the time of publication. Please check for any updates to the device  
manual from the Renesas website at: www.renesas.com/renesas_starter_kits  
6. Renesas M16C Compiler  
The version of the compiler provided with this Renesas Starter Kit is fully functional but time limited. You have 60 days to evaluate the full  
product before the compiler will limit the code linker to 64k bytes. Full licensed M16C compiler versions are available from your Renesas  
supplier.  
7. Support  
Online technical support and information is available at: www.renesas.com/renesas_starter_kits  
Technical Contact Details  
America:  
Europe:  
Japan:  
Note on Autoupdate: The Autoupdater is configured to automatically add itself to the Startup folder in the Windows Start Menu and use the  
registry defaults for access to the web. After restarting the machine the Icon will appear in the System Tray next to the clock. To change the  
settings or access Autoupdate simply right-click on the icon and use the menu that appears.  
© Renesas Solutions Corporation. 2006.  
© Renesas Technology Europe Ltd. 2006.  
© Renesas Technology Corporation. 2006.  
D007054_11_S01_V04  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Radio Shack Motorized Toy Car 60 4397 User Guide
Radio Shack Projection Television 60 7515 User Guide
RCA Camcorder CC643 User Guide
Roland Music Mixer VS 2480 User Guide
Rotel Stereo Receiver RX 1050 User Guide
Samsung Cell Phone Genoa User Guide
Samsung CRT Television CL 21K40MQ User Guide
Samsung Fax Machine SF 750 Series User Guide
Sanyo Battery Charger N 500A User Guide
Sanyo Flat Panel Television CE42FD81 B User Guide