Download from Www.Somanuals.com. All Manuals Search And Download.
This manual is provided for information purposes only. All information included herein is
subject to change without notice. Samsung Electronics is not responsible for any changes,
direct or indirect, arising from or related to use of this manual.
© 2004 Samsung Electronics Co., Ltd. All rights reserved.
• SF-750 and Samsung logo are trademarks of Samsung Electronics Co., Ltd.
• All other brand or product names are trademarks of their respective companies or
organizations.
Download from Www.Somanuals.com. All Manuals Search And Download.
CONTENTS
ii
Download from Www.Somanuals.com. All Manuals Search And Download.
Sending a Fax Using Group Dialing
iii
Download from Www.Somanuals.com. All Manuals Search And Download.
iv
Download from Www.Somanuals.com. All Manuals Search And Download.
Important Precautions and Safety Information
When using this machine, these basic safety precautions should always be followed to reduce risk
of fire, electric shock, and injury to people:
1. Read and understand all instructions.
2. Use common sense whenever operating electrical appliances.
3. Follow all warnings and instructions marked on the machine and in the literature accompanying
the machine.
4. If an operating instruction appears to conflict with safety information, heed the safety
information. You may have misunderstood the operating instruction. If you cannot resolve the
conflict, contact your sales or service representative for assistance.
5. Unplug the machine from the AC wall socket and/or telephone jack before cleaning. Do not use
liquid or aerosol cleaners. Use only a damp cloth for cleaning.
6. Do not place the machine on an unstable cart, stand or table. It may fall, causing serious
damage.
7. Your machine should never be placed on, near or over a radiator, heater, air conditioner or
ventilation duct.
8. Do not allow anything to rest on the power cable. Do not place your machine where the cords
will be abused by persons walking on them.
9. Do not overload wall outlets and extension cords. This can diminish performance, and may
result in the risk of fire or electric shock.
10. Do not allow pets to chew on the AC power, telephone or PC interface cords.
11. Never push objects of any kind into the machine through case or cabinet openings. They may
touch dangerous voltage points, creating a risk of fire or shock. Never spill liquid of any kind
onto or into the machine.
12. Your machine may have a heavy cover for optimal pressure on the document for the best
scanning and/or faxing . In this case, replace the cover after placing the document on the scan
glass by holding and moving it down slowly until it seats on its location.
13. To reduce the risk of electric shock, do not disassemble the machine. Take it to a qualified
service technician when repair work is required. Opening or removing covers may expose you
to dangerous voltages or other risks. Incorrect reassembly could cause electric shock when the
unit is subsequently used.
14. Unplug the machine from the telephone jack, PC and AC wall outlet and refer servicing to
qualified service personnel under the following conditions:
•When any part of the power cord, plug or connecting cable is damaged or frayed.
•If liquid has been spilled into the machine.
•If the machine has been exposed to rain or water.
•If the machine does not operate properly after instructions have been followed.
•If the machine has been dropped, or the cabinet appears damaged.
•If the machine exhibits a sudden and distinct change in performance.
15. Adjust only those controls covered by the operating instructions. Improper adjustment of other
controls may result in damage, and may require extensive work by a qualified service technician
to restore the machine to normal operation.
16. Avoid using this machine during a lightning storm. There may be a remote risk of electric shock
from lightning. If possible, unplug the AC power and telephone cord for the duration of the
lightning storm.
17. SAVE THESE INSTRUCTIONS.
18. Use only No.26 AWG or larger telephone line cord.
v
Download from Www.Somanuals.com. All Manuals Search And Download.
Laser Safety Statement
The printer is certified in the U.S. to conform to the requirements of DHHS 21 CFR, chapter 1
Subchapter J for Class I(1) laser products, and elsewhere is certified as a Class I laser product
conforming to the requirements of IEC 825.
Class I laser products are not considered to be hazardous. The laser system and printer are designed
so there is never any human access to laser radiation above a Class I level during normal operation,
user maintenance or prescribed service condition.
WARNING
Never operate or service the printer with the protective cover removed from Laser/Scanner
assembly. The reflected beam, although invisible, can damage your eyes.
vi
Download from Www.Somanuals.com. All Manuals Search And Download.
Ozone Safety
Power Saver
During normal operation, this machine produces ozone. The ozone
produced does not present a hazard to the operator. However, it is
advisable that the machine be operated in a well ventilated area.
If you need additional information about ozone, please request your
nearest Samsung dealer.
This machine contains advanced energy conservation technology that
reduces power consumption when it is not in active use.
When the machine does not receive data for an extended period of
time, power consumption is automatically lowered.
The energy star emblem does not represent EPA endorsement of any
machine or service.
Recycling
Please recycle or dispose of the packaging material for this product in
an environmentally responsible manner.
Radio Frequency Emissions
FCC Information to the User
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
• Consult the dealer or experienced radio TV technician for help.
CAUTION: Change or modifications not expressly approved by the manufacturer responsible for
compliance could void the user's authority to operate the equipment.
vii
Download from Www.Somanuals.com. All Manuals Search And Download.
Canadian Radio Interference Regulations
This digital apparatus does not exceed the Class B limits for radio noise emissions from digital
apparatus as set out in the interference-causing equipment standard entitled “Digital Apparatus”,
ICES-003 of the Industry and Science Canada.
Cet appareil numérique respecte les limites de bruits radioélectriques applicables aux appareils
numériques de Classe B prescrites dans la norme sur le matériel brouilleur: “Appareils Numériques”,
ICES-003 édictée par l’Industrie et Sciences Canada.
Fax Branding
The Telephone Consumer Protection Act of 1991 makes it unlawful for any person to use a computer
or other electronic device to send any message via a telephone facsimile machine unless such
message clearly contains in a margin at the top or bottom of each transmitted page or on the first
page of the transmission the following information:
(1) the date and time of transmission
(2) identification of either business, business entity or individual sending the message; and
(3) telephone number of either the sending machine, business, business entity or individual.
The Telephone Company may make changes in its communications facilities, equipment operations,
or procedures where such action is reasonably required in the operation of its business and is not
inconsistent with the rules and regulations in FCC Part 68. If such changes can be reasonably
expected to render any customer terminal equipment incompatible with telephone company
communications facilities, or require modification or alteration of such terminal equipment, or
otherwise materially affect its use or performance, the customer shall be given adequate notice in
writing, to allow the customer an opportunity to maintain uninterrupted service.
Ringer Equivalence Number
The Ringer Equivalence Number and FCC Registration Number for this machine may be found on the
label located on the bottom or rear of the machine. In some instances you may need to provide these
numbers to the telephone company.
The Ringer Equivalence Number (REN) is a measure of the electrical load placed on the telephone
line, and is useful for determining whether you have “overloaded” the line. Installing several types
of equipment on the same telephone line may result in problems making and receiving telephone
calls, especially ringing when your line is called. The sum of all Ringer Equivalence Numbers of the
equipment on your telephone line should be less than five in order to assure proper service from the
telephone company. In some cases, a sum of five may not be usable on your line. If any of your
telephone equipment is not operating properly, you should immediately remove it from your
telephone line, as it may cause harm to the telephone network.
WARNING:
FCC Regulations state that changes or modifications to this equipment not expressly approved by
the manufacturer could void the user’s authority to operate this equipment. In the event that
terminal equipment causes harm to the telephone network, the telephone company should notify
the customer that service may be stopped. However, where prior notice is impractical, the company
may temporarily cease service, providing that they:
a) promptly notify the customer.
b) give the customer an opportunity to correct the equipment problem.
c) inform the customer of the right to bring a complaint to the Federal Communication Commission
pursuant to procedures set out in FCC Rules and Regulations Subpart E of Part 68.
viii
Download from Www.Somanuals.com. All Manuals Search And Download.
You should also know that:
• Your machine is not designed to be connected to a digital PBX system.
• If you intend to use a computer modem or fax modem on the same phone line as your machine,
you may experience transmission and reception problems with all the equipment. It is
recommended that no other equipment, except for a regular telephone, share the line with your
machine.
• If your area experiences a high incidence of lightning or power surges, we recommend that you
install surge protectors for both the power and the telephone lines. Surge protectors can be
purchased from your dealer or telephone and electronic specialty stores.
• When programming emergency numbers and/or making test calls to emergency numbers, use a
non-emergency number to advise the emergency service dispatcher of your intentions. The
dispatcher will give you further instructions on how to actually test the emergency number.
• This machine may not be used on coin service or party lines.
• This machine provides magnetic coupling to hearing aids.
• You may safely connect this equipment to the telephone network by means of a standard
modular jack, USOC RJ-11C.
Declaration of Conformity (European Countries)
Approvals and Certifications
The CE marking applied to this product symbolizes Samsung Electronics Co., Ltd.
Declaration of Conformity with the following applicable 93/68/EEC Directives of
the European Union as of the dates indicated:
January 1, 1995: Council Directive 73/23/EEC Approximation of the laws of the
member states related to low voltage equipment.
January 1, 1996: Council Directive 89/336/EEC (92/31/EEC), approximation of the laws of the
Member States related to electromagnetic compatibility.
March 9, 1999: Council Directive 1999/5/EC on radio equipment and telecommunications terminal
equipment and the mutual recognition of their conformity.
A full declaration, defining the relevant Directives and referenced standards can be obtained from
your Samsung Electronics Co., Ltd. representative.
EC Certification
Certification to 1999/5/EC Radio Equipment & Telecommunications Terminal Equipment
Directive (FAX)
This Samsung product has been self-certified by Samsung for pan-European single terminal
connection to the analogue public switched telephone network (PSTN) in accordance with Directive
1999/5/EC. The product has been designed to work with the national PSTNs and compatible PBXs
of the European countries:
In the event of problems, you should contact the Euro QA Lab of Samsung Electronics Co., Ltd. in
the first instance.
The product has been tested against TBR21. To assist in the use and application of terminal
equipment which complies with this standard, the European Telecommunication Standards Institute
(ETSI) has issued an advisory document (EG 201 121) which contains notes and additional
requirements to ensure network compatibility of TBR21 terminals. The product has been designed
against, and is fully compliant with, all of the relevant advisory notes contained in this document.
ix
Download from Www.Somanuals.com. All Manuals Search And Download.
Replacing the Fitted Plug (for UK Only)
IMPORTANT
The mains lead for this machine is fitted with a standard (BS 1363) 13 amp plug and has a 13 amp
fuse. When you change or examine the fuse, you must re-fit the correct 13 amp fuse. You then need
to replace the fuse cover. If you have lost the fuse cover, do not use the plug until you have another
fuse cover.
Please contact the company from where the machine was purchased.
The 13 amp plug is the most widely used type in the UK and should be suitable. However, some
buildings (mainly old ones) do not have normal 13 amp plug sockets. You need to buy a suitable
plug adaptor. Do not remove the moulded plug.
WARNING
If you cut off the moulded plug, get rid of it straight away.
You cannot rewire the plug and you may receive an electric shock if you plug it into a socket.
IMPORTANT WARNING: You must earth this machine.
The wires in the mains lead have the following code:
• Green and Yellow:
• Blue:
• Brown:
Earth
Neutral
Live
If the wires in the mains lead do not match the colors marked in your plug, do the following:
You must connect the green and yellow wire to the pin colored green and yellow or green or marked
by the letter “E” or by the safety `Earth symbol.'
You must connect the blue wire to the pin colored black or which is marked with the letter “N.”
You must connect the brown wire to the pin colored red or which is marked with the letter “L.”
You must have a 13 amp fuse in the plug, adaptor, or at the distribution board.
x
Download from Www.Somanuals.com. All Manuals Search And Download.
xi
Download from Www.Somanuals.com. All Manuals Search And Download.
Differences Between British and American English
British English
(Re)dialling
American English
(Re)dialing
Colour
Color
Emphasise
Recognise
Organise
Authorise
Cancelling
Customise
Socket
Emphasize
Recognize
Organize
Authorize
Canceling
Customize
Jack
Labelling
Favourite
Columns
Grey
Labeling
Favorite
Colums
Gray
Greyscale
Grayscale
WARNING
• Do not disassemble the machine as it may give you an electric shock.
• If you print large amounts of copies, the surface of the output tray may become hot. Be careful
not to touch the surface, especially for children.
xii
Download from Www.Somanuals.com. All Manuals Search And Download.
GETTING STARTED
1
Thank you for purchasing this facsimile.
This chapter gives you step-by-step instructions for setting up your
machine.
This chapter includes:
•
Setting Up Your Machine
Understanding the Component Location
Attaching the Document Output Support
Installing the Toner Cartridge
Loading Paper
Connecting the Telephone Line
Turning the Machine On
•
Setting Up the Machine System
Setting the Machine ID
Setting the Date and Time
Setting the Paper Type and Size
Setting Sounds
Using the Save Modes
Setting Up the Fax System
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting Up Your Machine
Unpacking
Remove the machine and all accessories from the packing carton. Make
sure that the machine has been packed with the following items. If there is
a missing item, contact the retailer where you bought the machine:
AC Power Cord*
Starter Toner Cartridge
User’s Guide &
Quick Install Guide
Document Output Support
TAM Lead (for UK only)
Telephone Line Cord*
* The appearance of the power cord and the telephone line cord may differ according to
your country’s specifications.
NOTES
:
• Components may differ from one country to another.
• You should use the telephone line cord which is supplied with your machine.
If you are replacing it with another vendor’s, it should be AWG #26 or larger
telephone line cord.
• The power cord must be plugged into a grounded power socket.
GETTING STARTED
1.2
Download from Www.Somanuals.com. All Manuals Search And Download.
Remove the packing tape from the front, back and sides of the machine.
1
Selecting a Location
Select a level, stable place with adequate space for air circulation. Allow
extra space for opening covers and trays.
The area should be well-ventilated and away from direct sunlight or sources
of heat, cold and humidity. Do not set the machine close to the edge of your
desk or table.
Clearance Space
• Front: 482.6 mm (enough space so that the paper tray can be removed)
• Back: 250 mm (enough space for ventilation)
• Right: 100 mm
• Left: 100 mm (enough space for ventilation)
GETTING STARTED
1.3
Download from Www.Somanuals.com. All Manuals Search And Download.
Understanding the Component Location
These are the main components of your machine:
Front View
Automatic Document Feeder
Document Input Support
Control Panel (See page 1.5)
Document Output Tray
Front Output Tray (Face down)
Document
Guides
Paper Output
Extension
Front Cover
Toner
Cartridge
Paper Level
Indicator
Manual Feeder
Optional Paper Tray
(Tray 2)
Paper Tray (Tray 1)
Manual Feeder Guides
Rear View
Rear Cover
Rear Output
Slot (Face up)
Tray 2 Cable Connector
EXT Jack*
Line Jack
Power Switch
AC Power Cord Connector
* If your country has a different telephone
connection system, this socket may be
blocked.
GETTING STARTED
1.4
Download from Www.Somanuals.com. All Manuals Search And Download.
Control Panel Functions
1
Use to store frequently-dialed fax number and dial
them with a touch of a button.
1
Allows you to shift the one-touch buttons to the
numbers 21 through 40.
Adjusts the brightness of the documents for the
current copy job.
2
C
O
P
Y
Selects the document type for the current copy job.
Selects the number of copies.
Makes a copy smaller or larger than the original
document.
Displays the current status and prompts during an
operation.
3
Scrolls through the options available for the selected
menu item.
Confirms the selection on the display.
Enters Menu mode and scrolls through the menus
available.
Returns you to the upper menu level.
4
Stops an operation at any time.
In Standby mode, clears/cancels the copy options,
such as the darkness, the document type setting,
the copy size and the number of copies.
Starts a job.
GETTING STARTED
1.5
Download from Www.Somanuals.com. All Manuals Search And Download.
Dials a number or enters alphanumeric characters.
5
6
Allows you to save on toner by using less toner to
print documents.
Allows you to save on call costs by sending a fax at a
preset toll-saving time. Using this feature, you can
take advantage of lower long distance rates at night,
for example.
Allows you to select the fax receiving mode.
• Allows you to store frequently-dialed fax numbers using
a one or two-digit speed dial or group number for
automatic dialing and to edit the stored numbers.
• Allows you to print a Phonebook list.
7
F
Engages the telephone line.
A
X
Allows you to send a fax to multiple destinations.
Adjusts the resolution of the documents for the
current fax job.
Redials the last number in Standby mode or inserts a
pause into a fax number in Edit mode.
Attaching the Document Output Support
Insert the two tabs on the supplied document output support into the holes
on both sides of the paper output tray.
Fold out the extender, if necessary.
NOTE: When detaching the document
output tray, detach it by pressing the front
portion of document output tray as seen
from the picture. As this time, even though
the dull sound is heard the components are
safe from damge.
GETTING STARTED
1.6
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing the Toner Cartridge
1
1
Open the front cover.
2
Remove the starter toner cartridge from its bag. Gently roll the
cartridge 5 or 6 times to distribute the toner evenly inside the
cartridge.
Thoroughly rolling the cartridge will assure the maximum copies per
cartridge.
CAUTION
:
• To prevent damage to the toner cartridge, do not expose it to light for more
than a few minutes. Cover it with a piece of paper, if necessary.
• If the toner gets on your clothing, wipe it off with a dry cloth and wash
clothing in cold water. Hot water sets the toner into the fabric.
3
Slide the toner cartridge into the machine until it locks into place
completely.
4
Close the front cover. Make sure that the cover is securely latched.
GETTING STARTED
1.7
Download from Www.Somanuals.com. All Manuals Search And Download.
Loading Paper
You can load approximately 250 sheets.
To load a stack of Letter-sized paper:
1
Pull open the paper tray and remove it from the machine.
2
Push down on the pressure plate until it locks into place.
3
4
Fan the edges of the paper stack to separate the pages. Then tap the
stack on a flat surface to even it up.
Insert the paper stack into the paper tray with the side you want to
print on facing up.
NOTE: If you want to load a different size of paper, you need to adjust the
paper guides. For details, see page 1.9.
5
6
Pay attention to the paper limit mark on the left inside wall of the tray.
Paper overloading may cause paper jams.
Insert and slide the paper tray back into the machine.
NOTE: After you load the paper, you need to set up your machine for the paper
type and size you loaded. See page 1.15.
GETTING STARTED
1.8
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing the Paper Size in the Paper Tray
To load longer sizes of paper, such as Legal-sized paper, you need to adjust
the paper guides to extend the paper tray.
1
1
After pressing and unlatching the guide lock, slide the paper length
guide out completely to extend the paper tray to its full length.
2
3
After inserting the paper into the tray, slide in the guide until it lightly
touches the end of the paper stack.
Pinching the paper width guide as shown, move it toward the stack of
paper until it lightly touches the side of the stack.
NOTES
:
• Do not push the paper width guide far enough to cause the materials to warp.
• If you do not adjust the paper width guide, it may cause paper jams.
GETTING STARTED
1.9
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting the Telephone Line
1
Plug the telephone line cord into the LINE jack and the other end into
the wall jack.
➔ To the wall jack
2
To connect a telephone and/or answering machine to your machine, plug
the cord of your extension phone or answering machine into the EXT jack.
➔ To an extension phone or
answering machine
UK users should plug the cord of the extension phone into the supplied
TAM lead and plug the cord of the TAM lead into the EXT jack on the
back of your machine.
TAM lead
(For UK users only)
GETTING STARTED
1.10
Download from Www.Somanuals.com. All Manuals Search And Download.
NOTES
:
• Use the TAM lead and the telephone line cord supplied with your machine.
• In the United Kingdom, if a three-wire type (SHUNT-wire, found on older
equipment) telephone or answering machine is connected to the EXT jack on
the machine, the external equipment will fail to ring when receiving an
incoming call as the machine is designed to operate with the latest
technology. To prevent this incompatibility, use two-wire (newer equipment)
telephones or answering machines.
1
Turning the Machine On
1
Plug one end of the supplied three-pronged electrical type cord into the AC
socket on the machine and the other end into a properly grounded AC outlet.
2
Press the power switch to turn the machine on. “Warming Up Please
Wait” appears on the display indicating that the machine is now on.
➔ To the AC wall jack
To view your display text in another language, see the next page.
CAUTION
:
• The fusing area inside the rear part of your machine becomes hot once the
machine is turned on. Be careful when you access this area.
• Do not disassemble the machine when it turned on as it may give you an
electric shock.
GETTING STARTED
1.11
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting Up the Machine System
Changing the Display Language
To change the language that displays on the display of the control panel,
follow these steps:
1
2
Press Menu until “Machine Setup” appears on the top line of the display.
Press the scroll button (➛ or ❿) until “Language” appears on the bottom
line of the display.
3
4
Press Enter. The current setting appears on the bottom line of the display.
Press the scroll button (➛ or ❿) until the language you want appears
on the display.
5
6
Press Enter to save the selection.
To return to Standby mode, press Stop/Clear.
Setting the Machine ID
In some countries, you are required by law to indicate your fax number on
any fax you send. The Machine ID, containing your telephone number and
name or company name, will be printed at the top of each page sent from
your machine.
1
Press Menu until “Machine Setup” appears on the top line of the
display. The first available menu item, “Machine ID” displays on the
bottom line.
2
3
Press Enter. The display asks you to enter the fax number.
If there is a number already set, that number appears.
Enter your fax number using the number keypad.
NOTE: If you make a mistake while entering numbers, press the ➛ button to
delete the last digit.
4
5
Press Enter when the number on the display is correct. The display
asks you to enter the ID.
Enter your name or company name using the number keypad.
You can enter alphanumeric characters using the number keypad, and
include special symbols by pressing the 0 button.
For details on how to use the number keypad to enter alphanumeric
characters, see the following section.
If you want to enter the same letter or number in succession (e.g. SS,
AA, 777), enter one digit, move the cursor by pressing the ❿ button
and enter the next digit.
If you want to insert a space in the name, you can also use the ❿
button to move the cursor to skip the position.
6
7
Press Enter when the name on the display is correct.
Press Stop/Clear to return to Standby mode.
GETTING STARTED
1.12
Download from Www.Somanuals.com. All Manuals Search And Download.
Entering Characters Using the Number Keypad
As you perform various tasks, you may need to enter names and numbers.
For example, when you set up your machine, you enter your name or your
company’s name and telephone number. When you store speed dial or
group dial numbers, you may also enter the corresponding names.
1
To enter alphanumeric characters:
1
When you are prompted to enter a letter, locate the button labeled
with the character you want. Press the button until the correct letter
appears on the display.
For example, to enter the letter O, press 6, labeled with “MNO.”
Each time you press 6, the display shows a different letter, M, N, O
and finally 6.
You can enter special characters, such as space, plus sign and so on.
For details, see “Keypad Letters and Numbers” below.
2
3
To enter additional letters, repeat step 1.
If the next letter is printed on the same button, move the cursor by
pressing the ❿ button and then press the button labeled with the letter
you want. The cursor moves to the right and the next letter appears on
the display.
You can enter a space by pressing the
button.
When you finish entering letters, press Enter.
Keypad Letters and Numbers
Key
1
Assigned numbers, letters or characters
Space
1
A
D
G
J
2
B
E
C
F
I
2
3
4
5
3
4
H
K
N
Q
U
5
L
6
M
P
O
6
7
R
V
S
8
7
8
T
9
W
X
Y
Z
9
0
+
-
,
.
’
/
*
#
&
0
Changing Numbers or Names
If you make a mistake while entering a number or name, press the ➛ button to
delete the last digit or character. Then enter the correct numbers or characters.
Inserting a Pause
With some telephone systems, you must dial an access code (9, for
example) and listen for a second dial tone. In such cases, you must insert
a pause in the telephone number. You can insert a pause while you are
setting up one-touch or speed dial numbers.
To insert a pause, press Redial/Pause at the appropriate place while
entering the telephone number. A “–” appears on the display at the
corresponding location.
GETTING STARTED
1.13
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the Date and Time
The current date and time are shown on the display when your machine is
on and ready to work. All of your faxes will have the date and time printed
on them.
NOTE: If power to the machine is cut off, you need to reset the correct time and
date once the power is restored.
1
2
3
Press Menu until “Machine Setup” appears on the top line of the
display.
Press the scroll button (➛ or ❿) to display “Date & Time” on the
bottom line and press Enter.
Enter the correct time and date using the number keypad.
Month
Day
Year
= 01 ~ 12
= 01 ~ 31
= requires all four digits
= 01 ~ 12 (12-hour mode)
00 ~ 23 (24-hour mode)
= 00 ~ 59
Hour
Minute
NOTE: The date format may differ from each country.
You can also use the scroll button (➛ or ❿) to move the cursor under
the digit you want to correct and enter a new number.
4
5
To select “AM” or “PM” for 12-hour format, press the
or any number button.
or
button
When the cursor is not under the AM or PM indicator, pressing the
or button immediately moves the cursor to the indicator.
You can change the clock mode to 24-hour format (e.g. 01:00 PM as
13:00). For details, see page 1.14.
Press Enter when the time and date on the display is correct.
When you enter a wrong number, the machine beeps and does not proceed
to the next step. If this happens, simply reenter the correct number.
Changing the Clock Mode
You can set your machine to display the current time using either 12-hour
or 24-hour format.
1
Press Menu until “Machine Setup” appears on the top line of the
display.
2
Press the scroll button (➛ or ❿) until you see “Clock Mode” on the
bottom line and press Enter.
The clock mode currently set for the machine displays.
3
4
Press the scroll button (➛ or ❿) to select the other mode and then
press Enter to save the selection.
To return to Standby mode, press Stop/Clear.
GETTING STARTED
1.14
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the Paper Type and Size
1
After loading paper in the paper tray (Tray 1), you need to set the paper
type and size using the control panel buttons.
1
Press Menu.
The display shows “Paper Setting” on the top line and the first menu
item, “Paper Type,” on the bottom line.
2
3
Press Enter to access the menu item.
Use the scroll button (➛ or ❿) to fine the paper type you are using and
press Enter to save it.
4
Press the ❿ꢀbutton to scroll to “Paper Size” and press Enter to access
the menu item.
5
6
Press Enter when “Tray 1 Size” displays on the bottom line.
Use the scroll button (➛ or ❿) to find the paper size you are using and
press Enter to save it.
7
To return to Standby mode, press Stop/Clear.
GETTING STARTED
1.15
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting Sounds
You can control the following sounds:
• Ringer: adjusts the ringer volume.
• Key Sound: With this option set to “On,” a key tone sounds each time a
key is pressed.
• Alarm Sound: turns the alarm sound on or off. With this option set to
“On,” an alarm tone sounds when an error occurs or fax communication
ends.
• Speaker: turns on or off the sounds from the telephone line through the
speaker, such as a dial tone or a fax tone. With this option set to
“Comm.,” the speaker is on until the remote machine answers.
You can adjust the speaker volume level using the On Hook Dial button.
Speaker, Ringer, Key Sound and Alarm Sound
1
2
3
Press Menu until “Sound/Volume” appears on the top line of the
display.
Press the scroll button (➛ or ❿) to scroll through the options. Press
Enter when you see the sound option you want.
Press the scroll button (➛ or ❿) to display the status or loudness you
want for the option you have selected.
For the ringer volume, you can select from “Off”, “Low”, “Med” and
“High.” Setting “Off” means that the ringer turns off. The machine
works normally even if the ringer is turned off.
4
5
6
Press Enter to save the selection.
If necessary, repeat steps 2 through 4.
To return to Standby mode, press Stop/Clear.
Speaker Volume
1
2
Press On Hook Dial. A dial tone sounds from the speaker.
Press the scroll button (➛ or ❿) until you hear the loudness you want.
The display shows the current volume level.
3
Press Stop/Clear to save the change and return to Standby mode.
GETTING STARTED
1.16
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Save Modes
1
Toner Save Mode
Toner Save mode allows your machine to use less toner on each page.
Activating this mode extends the life of the toner cartridge longer than
normal, but it reduces the print quality.
To turn the toner save mode on or off, press Toner Save.
• If the button backlight is on, the mode is active and the machine uses
less toner when printing a document.
• If the button backlight is off, the mode is deactivated and the machine
prints with the normal quality.
Toll Save Mode
Using the Toll Save button on the control panel, you can quickly set your
machine to send the document(s) stored in the memory during the preset
time slot, when the call charge is lowered. This Toll Save mode helps you to
take advantage of lower long distance rates at night, for example.
NOTE: The toll-saving time slot may vary depending on your contract with
along distance phone company.
To turn the toll save mode on:
1
2
3
Press Toll Save. The button backlight turns on.
Press Enter when “Start Time” displays on the bottom line.
Enter the time when your machine starts sending toll save faxes, using
the number keypad.
To select “AM” or “PM” for 12-hour format, press the
or any number button.
or
button
4
5
6
Press Enter when the starting time on the display is correct.
Press the scroll button (➛ or ❿) to display “End Time” and press Enter.
Enter the time when the toll save transmission ends, using the number
keypad.
7
8
Press Enter to save the setting.
To return to Standby Mode, press Stop/Clear.
Once Toll Save mode is activated, your machine stores all of the documents
to be faxed into the memory and sends them at the programed time.
To turn Toll Save mode off, press Toll Save again. The button backlight
turns off and the mode is deactivated.
NOTE: Once the toll-saving time is set, the Toll Save button allows you to only
enable or disable Toll Save mode. To change the time setting, use the Toll Save
item in the Advanced Fax menu. See page 4.5.
GETTING STARTED
1.17
Download from Www.Somanuals.com. All Manuals Search And Download.
Power Save Mode
Power Save mode allows your machine to reduce power consumption when
it is not in actual use. You can turn this mode on by selecting the length of
time for which the machine waits after a job is printed before it switches to
a reduced power state.
1
2
Press Menu until “Machine Setup” appears on top line of the display.
Press the scroll button (➛ or ❿) until “Power Save” appears on the
bottom line. Press Enter.
3
4
Press the scroll button (➛ or ❿) to display “On” on the bottom line and
press Enter.
Selecting “Off” means that Power Save mode turns off.
Press the scroll button (➛ or ❿) until the time settings you want
appears.
The available options are 5, 10, 15, 30 and 45 (minutes).
Press Enter to save the selection.
5
6
To return to Standby mode, press Stop/Clear.
Setting Up the Fax System
Your machine has various user-selectable fax setup options. These options
are preset at the factory, but you may need to change them.
1
Press Menu until “Fax Setup” appears on the top line of the display.
The first available menu item, “Ring To Answer,” displays on the
bottom line.
2
3
Press the scroll button (➛ or ❿) until the menu item you want on the
bottom line and press Enter.
Use the scroll button (➛ or ❿) to find the status or use the number
keypad to enter the value for the option you have selected.
4
5
6
Press Enter to save the selection.
If necessary, repeat steps 2 through 4.
To return to Standby mode, press Stop/Clear.
GETTING STARTED
1.18
Download from Www.Somanuals.com. All Manuals Search And Download.
Available Fax Setup Options
You can use the following setup options for configuring the fax system:
Option
Description
1
Ring To Answer
You can specify the number of times the machine rings, 1 to 7, before
answering an incoming call.
Darkness
You can select the default darkness mode to fax your documents lighter
or darker.
•
•
•
Light works well with dark print.
Normal works well with standard typed or printed documents.
Dark works well with light print or faint pencil markings.
Redial Term
Redials
Your machine can automatically redial a remote fax machine when the
line is busy. Intervals from 1 to 15 minutes can be entered.
You can specify the number of redial attempts, 0 to 13. If you enter 0,
the machine will not redial.
MSG Confirm
You can set your machine to print a report showing whether the
transmission was successful, how many pages were sent and more. The
available options are On, Off and On-Error, which prints only when a
transmission is not successful.
Auto Report
A report with detailed information about the previous 50
communications operations, including time and dates. The available
options are On or Off.
Auto Reduction
When receiving a document as long as or longer than the paper loaded
in the paper tray, the machine can reduce the size of the document to fit
the size of paper loaded in the machine. Select On if you want to
automatically reduce an incoming page.
With this feature set to Off, the machine cannot reduce the document
to fit onto one page, the document is divided and printed in actual size
on two or more pages.
Discard Size
When receiving a document as long as longer than the paper installed in
your machine, you can set the machine to discard any excess at the
bottom of the page. If the received page is outside the margin you set,
it will print on two sheets of paper at the actual size.
When the document is within the margin and the Auto Reduction feature
is turned on, the machine reduces the document to fit it onto the
appropriate sized paper and discard does not occur. If the Auto
Reduction feature is turned off or fails, the data within the margin will
be discarded. Settings range from 0 to 30 mm.
Receive Code
DRPD Mode
The Receive Code allows you to initiate fax reception from an extension
phone plugged into the EXT jack on the back of the machine. If you pick
up the extension phone and hear fax tones, enter the Receive Code. The
code is preset to
9
at the factory. Settings range from 0 to 9. See
You can receive a call using the Distinctive Ring Pattern Detection
(DRPD) feature which enables you to use a single telephone line to
answer several different telephone numbers. In this menu, you can set
the machine to recognize the ring patterns to answer. For details about
this feature, see page 2.8.
GETTING STARTED
1.19
Download from Www.Somanuals.com. All Manuals Search And Download.
MEMO
GETTING STARTED
1.20
Download from Www.Somanuals.com. All Manuals Search And Download.
Sending a Fax
Preparing a Document
Using the ADF (Automatic Document Feeder), you can load up to 50
documents for one job.
When you use the ADF:
• Do not load documents smaller than 142 x 148 mm or larger than 216 x
356 mm.
• Do not attempt to feed the following types of documents:
- carbon-paper or carbon-backed paper
- coated paper
- onion skin or thin paper
- wrinkled or creased paper
- curled or rolled paper
- torn paper
• Remove all staples and paper clips before loading documents.
• Make sure any glue, ink or correction fluid on the paper is completely dry
before loading documents.
• Do not load documents containing different sizes or weights of paper.
• Do not load booklets, pamphlets, transparencies or documents having
other unusual characteristics.
Loading a Document
1
Pull the document input support all the way out. Fold out the extender,
if necessary.
2
Load the documents of up to 50 pages face down into the ADF.
BASIC FUNCTIONS
2.2
Download from Www.Somanuals.com. All Manuals Search And Download.
3
Adjust the document guides to the document size.
2
4
Adjust the document resolution,. See the following section.
Adjusting the Document Resolution
The default document settings produce good results when setting typical
text based documents.
However, if you send documents that are of poor quality, or contain
photographs, you can adjust the resolution to produce a higher quality fax.
1
2
Press Resolution.
By pressing Resolution or the scroll button (➛ or ❿), you can choose
from Standard, Fine, Super Fine, Photo.
The document types recommended for the resolution settings are described
in the following table below:
Mode
Standard
Fine
Recommended for:
Documents with normal-sized characters.
Documents containing small characters or thin lines or
documents printed using a dot-matrix printer.
Super Fine
Documents containing extremely fine detail. Super Fine
mode is enabled only if the remote machine also
supports the Super Fine resolution. See the notes
below.
Photo
Documents containing shades of gray or photographs.
NOTES
:
• For memory transmission, Super Fine mode is not available. The resolution
setting is automatically changed to Fine.
• When your machine is set to Super Fine resolution and the remote fax
machine does not support the Super Fine resolution, the machine transmits
using the highest resolution mode supported by the remote fax machine.
BASIC FUNCTIONS
2.3
Download from Www.Somanuals.com. All Manuals Search And Download.
Sending a Fax Automatically
1
2
3
Load the document(s) face down into the ADF.
For details about loading a document, see page 2.2.
Adjust the document resolution to suit your fax needs. See page 2.3.
If you need to change the darkness, see page 1.19.
Enter the remote fax phone number using the number keypad.
You can use the one-touch keypad or speed or group dial numbers. For
4
Press Start Copy/Fax.
After the number is dialed, the machine begins sending the fax when
the remote fax machine is ready.
NOTE: When you want to cancel the fax job, press Stop/Clear at any time
while sending the fax.
Sending a Fax Manually
1
Load the document(s) face down into the ADF.
For details about loading a document, see page 2.2.
2
Adjust the document resolution to suit your fax needs. See page 2.3.
If you need to change the darkness, see page 1.19.
3
4
Press On Hook Dial. You hear a dial tone.
Enter the remote fax machine’s fax number using the number keypad.
You can use the one-touch keypad or speed or group dial numbers. For
5
When you hear a high-pitched fax signal from the remote fax machine,
press Start Copy/Fax.
NOTE: When you want to cancel the fax job, press Stop/Clear at any time
while sending the fax.
Redialing the Last Number
To redial the last number you called:
Press Redial/Pause.
If a document is loaded in the ADF, the machine automatically begins to send.
BASIC FUNCTIONS
2.4
Download from Www.Somanuals.com. All Manuals Search And Download.
Confirming a Transmission
When the last page of your document has been sent successfully, the
machine beeps and returns to Standby Mode.
When something goes wrong while sending your fax, an error message
appears on the display. For a listing of error messages and their meanings,
If you receive an error message, press Stop/Clear to clear the message
and try to send the document again.
2
You can set your machine to print a confirmation report automatically each
time sending a fax is completed. For further details, see the MSG Confirm
Automatic Redialing
When the number you have dialed is busy or there is no answer when you
send a fax, the machine automatically redials the number every three
minutes up to seven times by the factory default settings.
When the display shows “[Retry Redial?],” press Enter to redial the number
without waiting. To cancel the automatic redialing, press Stop/Clear.
To change the time interval between redials and the number of redial
attempts. See page 1.19.
BASIC FUNCTIONS
2.5
Download from Www.Somanuals.com. All Manuals Search And Download.
Receiving a Fax
About the Receiving Modes
• In Fax mode, the machine answers an incoming fax call and
immediately goes into the fax reception mode.
• In Tel mode, you can receive a fax by pressing On Hook Dial (you can
hear a fax tone from the remote machine) and then pressing Start
Copy/Fax on the control panel of your machine. You can also pick up
the handset of the extension phone and then press the remote receive
code; see page 2.8.
• In Ans/Fax mode, the answering machine answers an incoming call,
and the caller can leave a message on the answering machine. If the fax
machine senses a fax tone on the line, the call automatically switches to
Fax mode.
• In DRPD mode, you can receive a call using the Distinctive Ring Pattern
Detection (DRPD) feature. “Distinctive Ring” is a telephone company
service which enables a user to use a single telephone line to answer
several different telephone numbers. For further details, see page 2.8.
The current receiving mode displays when the machine is in Standby mode.
When the memory is full, the receiving mode automatically switches to Tel.
NOTES
:
• To use Ans/Fax mode, attach an answering machine to the EXT jack on the
back of your machine. See page 1.10.
• If you do not want other people to view your received documents, you can
use Secure Receiving mode. In this mode, all of the received faxes are stored
Loading Paper for Receiving Faxes
Faxes can only be printed on Letter-, A4- or Legal-sized 20lb(75g/m2)plain
paper. For details about loading paper and setting the paper size in the tray,
The paper level indicator on the front of the paper tray shows the amount
of paper currently left in the tray. When the tray is empty, the indicator of
the bar is lowered.
❷ꢀPaper full
Paper empty œ
BASIC FUNCTIONS
2.6
Download from Www.Somanuals.com. All Manuals Search And Download.
Receiving Automatically in Fax Mode
Your machine is preset to Fax mode at the factory. If you have changed the
receiving mode, take the following steps to receive faxes automatically:
1
2
Press Receive Mode.
Press and hold Receive Mode until “Fax” displays on the bottom line.
You may have to repeat this action once or twice depending on the
mode you’re in.
2
3
When you receive a fax, the machine answers the call on a specified
number of rings and automatically receives the fax.
Receiving Manually in Tel Mode
You can answer calls using On Hook Dial.
1
2
Press Receive Mode.
Press and hold Receive Mode until “Tel” displays on the bottom line.
You may have to repeat this action once or twice depending on the
mode you’re in.
3
4
When you receive a fax call, press On Hook Dial.
You can hear a fax tone from the remote machine.
Press Start Copy/Fax to receive the fax.
The machine begins receiving a fax and returns to Standby mode when
the reception is completed.
Receiving Automatically in Ans/Fax Mode
For using this mode, you must attach an answering machine to the EXT jack
on the back of your machine. See page 1.10.
1
2
Press Receive Mode.
Press and hold Receive Mode until “Ans/Fax” displays on the bottom
line.
You may have to repeat this action once or twice depending on the
mode you’re in.
3
When you receive a call, the answering machine answers.
If the caller leaves a message, the answering machine stores the
message as it would normally. If your machine hears a fax tone on the
line, it automatically starts to receive the fax.
BASIC FUNCTIONS
2.7
Download from Www.Somanuals.com. All Manuals Search And Download.
NOTES
:
• When you have set your machine to Ans/Fax mode and your answering
machine is switched off or no answering machine is connected to the EXT
jack, your machine automatically goes into Fax mode after a predefined
number of rings.
• If your answering machine has a “user-selectable ring counter,” set it to
answer incoming calls within 1 ring.
• If you are in Tel mode, which is receiving faxes manually, when the
answering machine is connected to your machine, you must switch off the
answering machine, or the outgoing message from the answering machine
will interrupt your phone conversation.
Receiving Manually Using an Extension
Telephone
You can receive a fax from someone you are talking to on the extension
telephone without going to the fax machine.
When you receive a call on the extension phone and hear fax tones, press
the keys
9
on the extension telephone. The machine receives the
document.
Press the buttons slowly in sequence. If you still hear the fax tone from the
remote machine, try pressing once again.
9
9
is the remote receive code preset at the factory. The first and the
last asterisks are fixed, but you can change the middle number to whatever
you choose. For details about changing the code, see page 1.19.
Receiving Faxes Using DRPD Mode
“Distinctive Ring” is a telephone company service which enables a user to
use a single telephone line to answer several different telephone numbers.
The particular number someone uses to call you on is identified by different
ringing patterns, which consist of various combinations of long and short
ringing sounds. This feature is often used by answering services who
answer telephones for many different clients and need to know which
number someone is calling in on to properly answer the phone.
Using the Distinctive Ring Pattern Detection feature, your fax machine can
“learn” the ring pattern you designate to be answered by the FAX machine.
Unless you change it, this ringing pattern will continue to be recognized and
answered as a fax call, and all other ringing patterns will be forwarded to
the extension telephone or answering machine plugged into the EXT jack.
You can easily suspend or change Distinctive Ring Pattern Detection at any
time.
Before using the Distinctive Ring Pattern Detection option, Distinctive Ring
service must be installed on your telephone line by the telephone company.
To set up Distinctive Ring Pattern Detection, you will need another
telephone line at your location, or someone available to dial your fax
number from outside.
BASIC FUNCTIONS
2.8
Download from Www.Somanuals.com. All Manuals Search And Download.
To set up the DRPD mode:
1
2
Press Menu until “Fax Setup” appears on the top line of the display.
Press the scroll button (
➛
or
❿) until you see “DRPD Mode” on the
bottom line and press Enter.
3
When “Set” displays on the bottom line, press Enter.
“Waiting Ring” appears on the display.
4
5
Call your fax number from another telephone. It is not necessary to
place the call from a fax machine.
2
When your machine begins to ring, do not answer the call. The
machine requires several rings to learn the pattern.
When the machine completes learning, the LCD displays “End DRPD
[Setup].”
If the DRPD setup fails, “DRPD Ring Error” appears. Press Enter when
“DRPD Mode” displays and retry from step 3.
6
To return to Standby Mode, press Stop/Clear.
NOTES
:
• DRPD must be set up again if you re-assign your fax number, or connect the
machine to another telephone line.
• After DRPD has been set up, call your fax number again to verify that the
machine answers with a fax tone. Then have a call placed to a different
number assigned to that same line to be sure the call is forwarded to the
extension telephone or answering machine plugged into the EXT jack.
Receiving Faxes in the Memory
Your machine can receive faxes while you are making copies or printing a
received fax. If you receive a fax while you are copying, your machine
stores incoming faxes in its memory. Then, as soon as you finish copying,
the machine automatically prints the fax.
BASIC FUNCTIONS
2.9
Download from Www.Somanuals.com. All Manuals Search And Download.
Making a Copy
Loading Paper for Copying
The instructions for loading print materials into the paper tray are the same
whether you are faxing or copying. For further details, see page 1.8 for
loading in the paper tray.
For copying, you can also use the manual feeder to load special print
material, such as transparencies or labels, if they are Letter-, A4- or Legal-
sized. For further details about print materials you can use, see page A.6.
To load paper in the manual feeder:
1
Load a sheet of the print material with the print side face up into the
center of the manual feeder.
For transparencies, hold them by the edges and avoid touching the
print side. Oils from your finders can cause print quality problems.
2
Adjust the guide to the width of the print material.
NOTE: When printing on previously printed paper from the manual feeder, the
printed side should be facing down with an uncurled edge to the machine. If
you experience problems with paper feed, turn the paper around.
BASIC FUNCTIONS
2.10
Download from Www.Somanuals.com. All Manuals Search And Download.
3
Open the rear cover to use the rear output slot.
2
4
After copying, close the rear cover.
Setting the Paper Type and Size for the Manual Feeder
After loading paper in the manual feeder, you need to set the correct paper
type and size using the control panel buttons.
To set the paper size for the manual feeder:
1
Press Menu.
The display shows “Paper Setting” on the top line and the first item,
“Paper Type,” on the bottom line.
2
3
Press Enter to access the menu item.
Use the scroll button (➛ or ❿) to find the paper type you are using and
press Enter to save it.
4
Press the ❿ꢀbutton to scroll to “Paper Size” and press Enter to access
the menu item.
NOTE: If you are using envelopes or card stocks, you don’t need to set the
paper size.
5
6
7
Use the scroll button (➛ or ❿) to display “Manual Feed” on the bottom
line. Press Enter to access the menu item.
Use the scroll button (➛ or ❿) to find the paper size you are using and
press Enter to save it.
To return to Standby mode, press Stop/Clear.
Making a Copy
1
Load documents of up to 50 pages face down into the ADF and adjust
the document guides to the document size.
loading it into the ADF.
2
Customize the copy settings including number of copies, copy size,
darkness and original type by using the control panel buttons. See the
following section.Sorts the copy job. For example, if you make 2 copies
of 3 page documents, one complete 3 page document will print
followed by the second complete document. see page 2.14
To clear the settings, use the Stop/Clear button.
3
Press Start Copy/Fax.
BASIC FUNCTIONS
2.11
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting Copy Options
The buttons on the control panel let you make all the basic copy options;
darkness, document type, copy size and number of copies. Set the following
options for the current copy job before pressing Start Copy/Fax to make
copies.
NOTE: If you press Stop/Clear while you set the copy options, all of the
options you have set for the current copy job will be canceled and return to
their default status. Or, they will automatically return to their default status
after the machine completes the copy.
Darkness
If you have an original document containing faint markings and dark
images, you can adjust the brightness to make a copy that is easier to read.
To adjust the contrast, press Darkness. Each time you press the button,
the indicator labeled with the selected mode turns on.
You can choose from the following contrast modes:
• Light: works well with dark print.
• Normal: works well with standard typed or printed documents.
• Dark: works well with light print or faint pencil markings.
Original Type
The Original Type setting is used to improve the copy quality by selecting
the document for the current copy job.
To select the document type, press Original Type. Each time you press
the button, the indicator labeled with the selected mode turns on.
You can choose from the following image modes:
• Text: Use for documents containing mostly text.
• Photo: Use when the originals are photographs.
NOTE: When you copy a document containing color in the background, such as
a newspaper or a catalog, you can get the background on your copy. If you
want to reduce the background, change the Darkness setting to Light and/or
the Original Type setting to Text
.
Number of Copies
Using the No. of Copies button, you can select the number of copies from 1 to 99.
1
2
Press No. of Copies.
Press the scroll button (➛ or ❿) until the number you want appears on
the display.
Pressing and holding the buttons allows you to quickly increase and
decreases in increments of 5.
You can enter the value using the number keypad.
3
Press Enter to save the selection.
BASIC FUNCTIONS
2.12
Download from Www.Somanuals.com. All Manuals Search And Download.
Reduced/Enlarged Copying
Using the Reduce/Enlarge button, you can reduce or enlarge the size of
a copied image from 50 % to 200 %.
To select from the predefined copy sizes:
1
Press Reduce/Enlarge.
The default setting appears on the bottom line of the display.
2
3
Use Reduce/Enlarge or the scroll button (➛ or ❿) to find the size
setting you want.
2
Press Enter to save the selection.
To fine-tune the size of copies:
1
2
Press Reduce/Enlarge.
Press Reduce/Enlarge or the scroll button (➛ or ❿) until
“Custom:50-200 %” displays on the bottom line. Press Enter.
3
Press the scroll button (➛ or ❿) until the copy size you want appears
on the display.
Pressing and holding the buttons allows you to quickly increase and
decreases in increments of 5.
You can enter the value using the number keypad.
4
Press Enter to save the selection.
NOTE: When you make a reduced copy, black lines may appear at the bottom of
your copy.
Changing the Default Settings
Copy options, including darkness, original type, copy size and number of
copies, can be set to the most frequently used modes. When you copy a
document, the default settings are used unless they are changed by using
the corresponding buttons on the control panel.
To create your own default settings:
1
Press Menu on the control panel until “Copy Setup” appears on the top line of
the display.
The first menu item, “Default-Change,” appears on the bottom line.
2
Press Enter to access the menu item. The first setup option, “Darkness,”
appears on the bottom line.
3
4
5
Press the scroll button (➛ or ❿) to scroll through the setup options.
When the option you want to set appears, press Enter to access the option.
Change the setting using the scroll button (➛ or ❿) or enter the value using
the number keypad.
6
7
8
Press Enter to save the selection.
Repeat steps 3 through 6, as needed.
To return to Standby mode, press Stop/Clear.
NOTE: While you set copy options, pressing Stop/Clear cancels the changed
settings and restores their default status.
BASIC FUNCTIONS
2.13
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the Time Out Option
You can set the time the machine waits before it restores the default copy
settings, if you do not start copying after changing them on the control panel.
1
Press Menu on the control panel until “Copy Setup” appears on the top
line of the display.
2
3
4
Press the scroll button (➛ or ❿) to display “Timeout” on the bottom line.
Press Enter to access the menu item.
Press the scroll button (➛ or ❿) until the status you want appears on
the display.
You can select from 15, 30, 60 and 180 (seconds). Selecting “Off”
means that the machine does not restore the default settings until you
press Start Copy/Fax to start copying, or Stop/Clear to cancel.
5
6
Press Enter to save the selection.
To return to Standby mode, press Stop/Clear.
Collation Copying
The Collation copying feature is available only when you load
documents in the ADF.
1
Press Menu on the control panel until “Copy Setup” appears on the top
line of the display.
2
Press the scroll button (
bottom line.
➛
or
❿) to display “Copy Collated” on the
3
4
Press Enter to access the menu item.
If you are making multiple copies and want to collate them, press the
scroll button (
➛
or
❿) to set Collated Copy to “On” and press Enter.
œ
Collated Copy Off
œ
Collated Copy On
5
Press Start Copy/Fax to begin copying.
BASIC FUNCTIONS
2.14
Download from Www.Somanuals.com. All Manuals Search And Download.
Automatic Dialing
One-touch Dialing
The 20 one-touch buttons on the control panel lets you store frequently-
used fax numbers and enables you to dial a number automatically with a
touch of a button.
2
Using the Shift button, you can store up to 40 fax numbers on the one-
touch buttons.
Storing a Number for One-touch Dialing
1
Press and hold one of the one-touch dial buttons for about 2 seconds.
If you want to use one-touch dial buttons from 21 to 40, press Shift
and hold down the one-touch dial button for about 2 seconds.
The display asks you to enter the fax number. “T” signifies that you are
assigning a one-touch dial button.
If a number is already stored in the location you chose, the display
shows the number to allow you to change it. To start over with another
one-touch button, press Stop/Clear.
2
3
Enter the number you want to store using the number keypad and
press Enter.
To insert a pause between numbers, press Redial/Pause. A “-”
appears on the display.
If you make a mistake while entering a number, press the ➛ button
and re-enter the correct number.
To assign a name to the number, enter the name you want. For details
about entering characters, see page 1.13.
If you do not want to assign a name, skip this step.
4
5
Press Enter when the name appears correctly or without a name.
To store more numbers, press a one-touch button and repeat steps 2
through 4.
To return to Standby mode, press Stop/Clear.
Sending a Fax using a One-touch Number
1
2
3
4
Load the document(s) face down into the ADF.
For details about loading a document, see page 2.2.
Adjust the document resolution to suit your fax needs. See page 2.3.
If you need to change the darkness, see page 1.19.
Press the one-touch button where you stored a number.
The document scans into memory.
The machine dials the fax number stored in the one-touch dial location
and the document is sent when the remote fax machine answers.
BASIC FUNCTIONS
2.15
Download from Www.Somanuals.com. All Manuals Search And Download.
Speed Dialing
You can store up to 150 frequently dialed numbers in one, two or three-digit
speed dial locations (0-149).
Storing a Number for Speed Dialing
1
2
Press Phone Book.
Press Phone Book or the scroll button (➛ or ❿) to display
“Store&Edit” on the bottom line of the display. Press Enter.
3
Press Enter when “Speed Dials” appears on the display.
The display prompts you to enter a location number, showing the first
available number.
4
Enter a speed dial number between 0 and 149, using the number
keypad or scroll button (➛ or ❿), and press Enter.
If a number is already stored in the location you chose, the display
shows the number to allow you to change it. To start over with another
speed-dial number, press Upper Level.
5
6
Enter the number you want to store using the number keypad and
press Enter.
To insert a pause between numbers, press Redial/Pause. A “-”
appears on the display.
To assign a name to the number, enter the name you want. For details
about entering characters, see page 1.13.
If you do not want to assign a name, skip this step.
Press Enter when the name appears correctly or without a name.
To store more fax numbers, repeat steps 4 through 7.
To return to Standby mode, press Stop/Clear.
7
8
Sending a Fax using a Speed Number
1
2
3
Feed the document(s) face up into the ADF.
For details about loading a document, see page 2.2.
Adjust the document resolution to suit your fax needs. See page 2.3.
If you need to change the darkness, see page 1.19.
Enter the speed dial number.
• For a one-digit speed dial number, press and hold the appropriate
digit button.
• For a two or three-digit speed dial number, press the first digit
button(s) and hold down the last digit button.
The corresponding entry’s name briefly displays.
The document scans into memory.
4
The fax number stored in the speed dial location is automatically
dialed. The document is sent when the remote fax machine answers.
BASIC FUNCTIONS
2.16
Download from Www.Somanuals.com. All Manuals Search And Download.
Group Dialing
If you frequently send the same document to several destinations, you can
create a group of these destinations and set them under a one or two-digit
group dial location. This enables you to use a group dial number setting to
send the same document to all the destinations within the group.
Setting a Group Dial Number
2
1
2
Press Phone Book.
Press Phone Book or the scroll button (➛ or ❿) to display
“Store&Edit” on the bottom line of the display. Press Enter.
3
4
Press the scroll button (➛ or ❿) to display “Group Dials” on the bottom
line and press Enter.
Press Enter when “New” displays on the bottom line.
The display prompts you to enter a location number, showing the first
available number.
5
6
7
8
9
Enter a group number between 0 and 149, using the number keypad
or scroll button (➛ or ❿), and press Enter.
Press a one-touch dial button, or enter a speed number you want to
include in the group and press Enter.
When the display confirms the number to be added to the number,
press Enter.
Repeat steps 6 and 7 to enter other one-touch or speed dial numbers
into the group.
Press Upper Level when you have entered all of the numbers. The
display prompts you to enter a group ID.
10 To assign a name to the group, enter the name.
OR
If you do not want to assign a name, skip this step.
11 Press Enter when the name appears correctly or without a group ID.
12 If you want to assign another group, press Enter and repeat from step 5.
OR
To return to Standby mode, press Stop/Clear.
NOTE: You cannot include one group dial number in another group dial number.
BASIC FUNCTIONS
2.17
Download from Www.Somanuals.com. All Manuals Search And Download.
Editing Group Dial Numbers
You can delete a specific speed dial number from a selected group or add a
new number to the selected group.
1
2
Press Phone Book.
Press Phone Book or the scroll button (➛ or ❿) to display
“Store&Edit” on the bottom line of the display. Press Enter.
3
4
Press the scroll button (➛ or ❿) to display “Group Dials” on the bottom
line and press Enter.
Press the scroll button (➛ or ❿) to display “Edit” on the bottom line
and press Enter.
5
6
Enter the group number you want to edit and press Enter.
Press a one-touch dial button to enter a speed dial number you want to
add or delete.
7
When you enter the specific number in the group, the display shows
“Delete?.”
When you enter a new number, the display shows “Add?.”
Press Enter to add or delete the number.
8
9
To change the group name, press Upper Level.
10 Enter a new group name and press Enter.
11 If you want to edit another group, press Enter and repeat from step 5.
Or
To return to Standby mode, press Stop/Clear.
Sending a Fax Using Group Dialing
(Multi-address Transmission)
You can use group dialing for Broadcasting or Delayed transmissions.
Follow the procedure of the operation (Broadcasting fax; see page 3.2,
see page 3.5). When you come to a step in which the display asks you to
enter the remote fax number:
• For a one-digit group number, press and hold the appropriate digit button.
• For a two or three-digit group number, press the first digit button(s) and
hold down the last digit button.
You can use only one group number for one operation. Continue the
procedure to complete the operation.
Your machine automatically scans the document loaded in the ADF and then
dials each of the numbers within the group.
BASIC FUNCTIONS
2.18
Download from Www.Somanuals.com. All Manuals Search And Download.
Searching for a Number in the Memory
There are two ways to search for a number in memory. You can either scan
from A to Z sequentially, or you can search using the first letter of the name
associated with the number.
Searching Sequentially through the Memory
1
2
3
Press Phone Book.
2
Press Enter when “Search&Dial” appears on the display.
Press the scroll button (➛ or ❿) to scroll through memory until the name
and number you want to dial display. You can search upwards or
downwards through the entire memory in alphabetical order, from A to Z.
While searching through the machine’s memory, you can see that each
entry is preceded by one of three letters; “T” for one-touch dial, “S” for
speed dial or “G” for group dial number. These letters tell you how the
number is stored.
4
When the name and/or the number you want displays, press Start
Copy/Fax or Enter to dial.
Searching with a Particular First Letter
1
2
3
Press Phone Book.
Press Enter when “Search&Dial” appears on the display.
Press the button labeled with the letter you want to search for. A name
beginning with the letter displays.
For example, if you want to find the name “MOBILE,” press the 6
button, which is labeled with “MNO.”
4
5
Press the scroll button (➛ or ❿) to display the next name.
When the name and/or the number you want displays, press Start
Copy/Fax or Enter to dial.
Printing a Phonebook List
You can check your automatic dial setting by printing a Phonebook list.
1
2
Press Phone Book.
Press Phone Book or the scroll button (➛ or ❿) until “Print” appears
on the bottom line and press Enter.
A list showing your one-touch dial, speed dial and group dial entries
prints out.
BASIC FUNCTIONS
2.19
Download from Www.Somanuals.com. All Manuals Search And Download.
MEMO
BASIC FUNCTIONS
2.20
Download from Www.Somanuals.com. All Manuals Search And Download.
Sending Broadcasting Faxes
Using the Broadcasting button on the control panel, you can use the
broadcasting fax feature, which allows you to send a document to multiple
locations. Documents are automatically stored in memory and sent to a
remote station. After transmission, the documents are automatically erased
from memory.
1
Load the document(s) face down into the ADF.
For details about loading a document, see page 2.2.
Adjust the document resolution to suit your fax needs. See page 2.3.
If you need to change the darkness, see page 1.19.
Press Broadcasting on the control panel.
2
3
4
Enter the number of the remote machine using the number keypad.
You can use one-touch keypad or speed dial or group dial numbers. For
5
Press Enter to confirm the number. The display asks you to enter
another fax number to send the document.
NOTE: The “Another No.” prompt does not appear if you have added numbers
for another broadcasting or delayed fax job. You must wait until the job is
completed.
6
To enter more fax numbers, press 1 to select “Yes” and repeat steps 4
and 5. You can add up to 10 destinations.
Note that you cannot use group dial numbers for another fax number.
7
When you finish entering fax numbers, press 2 to select “No” at a
“Another No.” prompt.
The document is scanned into memory before transmission. The
display shows the memory capacity and the number of pages being
stored in the memory.
The machine begins sending the document in order of the numbers
you entered.
ADVANCED FAX
3.2
Download from Www.Somanuals.com. All Manuals Search And Download.
Sending a Delayed Fax
You can set your machine to send a fax at a later time when you will not be
present.
1
2
3
Load the document(s) face down into the ADF.
For details about loading a document, see page 2.2.
Adjust the document resolution to suit your fax needs. See page 2.3.
If you need to change the darkness, see page 1.19.
Press Menu until “Fax Feature” appears on the top line of the display.
The first available menu item, “DelayFax,” displays on the bottom line.
4
5
Press Enter.
Enter the number of the remote machine using the number keypad.
You can use one-touch keypad or speed dial or group dial numbers. For
3
6
Press Enter to confirm the number on the display. The display asks
you to enter another fax number to send the document.
NOTE: The “Another No.” prompt does not appear if you have added numbers
for another broadcasting or delayed fax job. You must wait until the job is
completed.
7
8
9
To enter more fax numbers, press 1 to select “Yes” and repeat steps 4
and 5. You can add up to 10 destinations.
Note that you cannot use group dial numbers for another fax number.
When you finish entering fax numbers, press 2 to select “No” at a
“Another No.” prompt.
The display asks you to enter a name.
To assign a name to the transmission, enter the name. If not, skip this step.
For details on how to enter the name using the number keypad, see
10 Press Enter.
The display shows the current time and asks you to enter the starting
time when the fax is to be sent.
11 Enter the time using the number keypad.
To select “AM” or “PM” for 12-hour format, press the
or any number button.
or
button
If you set a time earlier than the current time, the document will be
sent at that time on the following day.
12 Press Enter when the start time displays correctly.
The document is scanned into memory before transmission. The
display shows the memory capacity and the number of pages being
stored in memory.
The machine returns to Standby mode. The display reminds you that
you are in Standby mode and that a delayed fax is set.
ADVANCED FAX
3.3
Download from Www.Somanuals.com. All Manuals Search And Download.
Sending a Priority Fax
Using the Priority Fax feature, a high priority document can be sent ahead
of reserved operations. The document is scanned into memory and
transmitted when the current operation is finished. In addition, the priority
transmission interrupts a broadcast operation between stations (i.e., when
the transmission to station A ends, before transmission to station B begins)
or between redial attempts.
1
Load the document(s) face down into the ADF.
For details about loading a document, see page 2.2.
2
Adjust the document resolution to suit your fax needs. See page 2.3.
If you need to change the darkness, see page 1.19.
3
4
Press Menu until “Fax Feature” appears on the top line of the display.
Press the scroll button (➛ or ❿) to display “Priority Fax” on the bottom
line and press Enter.
5
Enter the number of the remote machine using the number keypad.
To enter the number, you can use one-touch keypad or speed dial or
group dial numbers. For details, see page 2.15.
6
7
Press Enter to confirm the number. The display asks you to enter a name.
To assign a name to the transmission, enter the name. If not, skip this
step.
For details on how to enter a name using the number keypad, see
8
Press Enter.
The document is scanned into memory before transmission. The
display shows the memory capacity and the number of pages being
stored in memory.
The machine shows the number being dialed and begins sending the
document.
ADVANCED FAX
3.4
Download from Www.Somanuals.com. All Manuals Search And Download.
Polling a Remote Machine
Polling is used when one fax machine requests another to send a document.
This is useful when the person with the original document to be sent is not
in the office. The person who wants to receive the document calls the
machine holding it and requests that the document be sent. In other words,
it “polls” the machine holding the original document.
You can set the machine to automatically receive documents from an
unattended remote fax machine at any time. This feature permits
unattended polling in the evening hours when telephone rates are lower.
NOTE: The remote fax machine must be ready for polling.
1
2
Press Menu until “Fax Feature” appears on the top line of the display.
Press the scroll button (➛ or ❿) to display “Delay RX Poll” on the
bottom line and press Enter.
3
3
Enter the number of the remote machine to be polled using the
number keypad.
To enter the number, you can use a one-touch keypad or speed dial
4
Press Enter to confirm the number on the display. The display asks
you to enter another fax number.
NOTE: The “Another No.” prompt does not appear if you have added numbers
for another broadcasting or delayed fax job. You must wait until the job is
completed.
5
To enter more fax numbers, press 1 to select “Yes” and repeat steps 4
and 5. You can add up to 10 destinations.
Note that you cannot use group dial numbers for another fax number.
6
7
When you finish entering fax numbers, press 2 to select “No” at a
“Another No.” prompt.
Enter the time using the number keypad.
To select “AM” or “PM” for 12-hour format, press the
or any number button.
or
button
If you set a time earlier than the current time, your machine will poll at
that time on the following day.
8
9
Press Enter when the start time displays correctly.
When the remote machine is secured with a 4-digit poll code, enter the
correct code and press Enter.
If not, press Enter to accept “0000” which represents no code, or
enter 0000.
At the specified time. the machine will dial the numbers and receive
documents from the remote machine in the order you entered.
ADVANCED FAX
3.5
Download from Www.Somanuals.com. All Manuals Search And Download.
Adding Documents to a Scheduled Fax
You can add documents to the delayed transmission previously reserved in
your machine’s memory.
1
Load the document(s) face down into the ADF.
For details about loading a document, see page 2.2.
2
Adjust the document resolution to suit your fax needs. See page 2.3.
If you need to change the darkness, see page 1.19.
3
4
Press Menu until “Fax Feature” appears on the top line of the display.
Press the scroll button (➛ or ❿) to display “Add Page” on the bottom
line and press Enter. The display shows the last job reserved in the
memory.
5
Press the scroll button (➛ or ❿) until you see the fax job to which you
want to add documents and press Enter.
The machine automatically stores the documents in memory, and the
display shows the memory capacity and the number of pages.
After storing, the machine displays the numbers of total pages and
added pages and then returns to Standby mode.
Canceling a Scheduled Fax
1
2
Press Menu until “Fax Feature” appears on the top line of the display.
Press the scroll button (➛ or ❿) to display “Cancel Job” and press
Enter. The display shows the last job reserved in the memory.
3
4
Press the scroll button (➛ or ❿) until you see the fax job you want to
cancel and press Enter.
When the display confirms your selection, press 1 to select “Yes.” The
selected job is canceled and the machine returns to Standby mode.
To cancel your selection, press 2 to select “No.”
ADVANCED FAX
3.6
Download from Www.Somanuals.com. All Manuals Search And Download.
Using Secure Receiving Mode
You may need to prevent your received faxes from being accessed by
unauthorized people. You can turn on Secure Receiving mode to restrict the
printing out all of received faxes when the machine is unattended. In Secure
Receiving mode, all of the incoming faxes go into memory. When the mode
turns off, any faxes stored are printed.
To turn Secure Receiving mode on:
1
2
Press Menu until “Advanced Fax” appears on the top line of the display.
Press the scroll button (➛ or ❿) until “Secure Receive” appears on the
bottom line and press Enter.
3
4
Press the scroll button (➛ or ❿) to display “On” on the bottom line and
press Enter.
Enter a four-digit passcode you want to use and press Enter.
NOTE: You can activate Secure Receiving mode without setting a passcode, but
cannot protect your faxes.
5
6
Re-enter the passcode to confirm it and press Enter.
To return to Standby mode, press Stop/Clear.
When a fax is received in Secure Receiving mode, your machine stores it in
memory and displays “Secure Receive” to let you know that there is a fax stored.
To print received documents:
1
2
Press Menu until “Advanced Fax” appears on the top line of the display.
Press the scroll button (➛ or ❿) until “Secure Receive” appears on the
bottom line and press Enter.
3
4
Press the scroll button (➛ or ❿) to display “Print” on the bottom line
and press Enter.
Enter the four-digit passcode and press Enter.
The machine prints all of the faxes stored in memory.
To turn Secure Receiving mode off:
1
2
3
4
Press Menu until “Advanced Fax” appears on the top line of the
display.
Press the scroll button (➛ or ❿) until “Secure Receive” appears on the
bottom line and press Enter.
Press the scroll button (➛ or ❿) to display “Off” on the bottom line and
press Enter.
Enter the four-digit passcode and press Enter.
The mode is deactivated and the machine prints all of the faxes stored
in memory.
5
To return to Standby mode, press Stop/Clear.
ADDITIONAL FEATURES
4.2
Download from Www.Somanuals.com. All Manuals Search And Download.
Printing Reports
Your machine can print reports containing useful information. The following
reports are available:
Phonebook List
This list shows all of the numbers currently stored in the machine’s memory
as speed dial and group dial numbers.
You can print this Phonebook list using the Phone Book button; see
Sent Fax Report
This report shows information of the faxes you recently sent.
Received Fax Report
This report shows information of the faxes you recently received.
System Data List
This list shows the status of the user-selectable options. You may print this
list to confirm your changes after changing any settings.
4
Scheduled Job Information
This list shows the document currently stored for Delayed faxes or Toll Save
faxes. The list shows the starting time and type of operation.
Message Confirmation
This report shows the fax number, the number of pages, the elapsed time
of the job, the communication mode and the communication results.
You can set up your machine to automatically print the message
confirmation report after each fax job. See page 1.19.
Junk Fax Number List
This list shows up to 10 fax numbers specified as the junk fax numbers by
feature is turned on, incoming faxes from those numbers are blocked.
This feature recognize the last 6 digits of the fax number set as a remote
fax machine’s ID.
Multi-communication Report
This report is printed automatically after sending documents from more
than one location.
Power Failure Report
This report is printed out automatically when power is restored after a
power failure and indicates any data loss due to the power failure.
NOTE: The lists you have set to print out automatically don’t print out when
there is no paper loaded or a paper jam has occurred.
ADDITIONAL FEATURES
4.3
Download from Www.Somanuals.com. All Manuals Search And Download.
Printing a Report
1
Press Menu until “Reports” appears on the top line of the display. The
first available menu item, “Phone Book” displays on the bottom line.
2
Press the scroll button (➛ or ❿) to display the report or list you want
to print on the bottom line.
• Phone Book: Phonebook list
• Sent Report: Sent fax report
• RCV Report: Received fax report
• System Data: System data list
• Scheduled Jobs: Scheduled job information
• MSG Confirm: Message confirmation
• Junk Fax List: Junk fax number list
3
Press Enter. The selected information prints out.
Using Advanced Fax Settings
Your machine has various user-selectable setting options for sending or
receiving faxes. These options are preset at the factory, but you may need
to change them. To find out how the options are currently set, print the
System Data list. For details about printing the list, page 4.3
Changing Setting Options
1
Press Menu until “Advanced Fax” appears on the top line of the
display. The first available menu item, “Send Forward,” displays on the
bottom line.
2
3
Press the scroll button (➛ or ❿) until you see the desired menu item
on the bottom line and press Enter.
When the option you want appears on the display, choose a status by
pressing the scroll button (➛ or ❿) or enter a value using the number
keypad.
4
5
Press Enter to save the selection.
You can exit from Setup mode at any time by pressing Stop/Clear.
ADDITIONAL FEATURES
4.4
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced Fax Setting Options
Option
Send Forward
Description
You can set the machine to always forward all of the outgoing
faxes to a specified destination, in addition to the fax numbers
you entered.
Select Off to turn this feature off.
Select On to turn this feature on. You can set the number of the
remote fax machine to which faxes are forwarded.
RCV Forward
You can set your machine to forward incoming faxes to another
fax number during a specified period of time. When a fax arrives
at your machine, it is stored in memory. Then, the machine dials
the fax number that you have specified and sends the fax.
Select Off to turn this feature off.
Select On to turn this feature on. You can set the fax number to
which faxes are forwarded. Then, you can enter the starting time
and/or the ending time. The Print Local Copy option allows you
to set the machine to print the fax, if fax forwarding is completed
without any error.
Toll Save
You can set your machine to store your faxes into the memory
and send them at the specified toll-saving time. For details about
Select Off to turn this feature off.
Select On to turn this feature on. You can set the starting time
and/or the ending time for Toll Save mode.
4
Junk Fax Setup
Using the Junk Fax Barrier feature, the system will not accept
faxes sent from remote stations of which their numbers are
stored in the memory as junk fax numbers. This feature is useful
for blocking any unwanted faxes.
Select Off to turn the feature off. Anybody can send you a fax.
Select On to turn the feature on. You can set up to 10 fax
numbers as junk fax numbers using the Set option. This feature
recognize the last 6 digits of the fax number set as a remote fax
machine’s ID. After storing numbers, you do not receive any
faxes from the registered stations. To delete all the junk fax
numbers, use the All Delete option.
Secure Receive
Prefix Dial No.
You can keep your received faxes from being accessed by
unauthorized people.
For further details about setting this mode, see page 4.2.
You can set a prefix dial number of up to five digits. This number
dials before any automatic dial number is started. It is useful for
accessing the PABX exchange.
ADDITIONAL FEATURES
4.5
Download from Www.Somanuals.com. All Manuals Search And Download.
Option
Description
Stamp RCV Name
This option allows the machine to automatically print the page
number and the date and time of the reception at the bottom of
each page of a received document.
Select Off to turn this feature off.
Select On to turn this feature on.
ECM Mode
(Error Correction Mode)
Error Correction Mode helps with poor line quality and makes
sure any fax you send are sent smoothly to any other ECM-
equipped fax machine. If the line quality is poor, it takes more
time to send a fax when you are using the ECM.
Select Off to turn this feature off.
Select On to turn this feature on.
ADDITIONAL FEATURES
4.6
Download from Www.Somanuals.com. All Manuals Search And Download.
Clearing the Memory
You can selectively clear information stored in your machine’s memory.
1
2
Press Menu on the control panel until “Maintenance” appears on the
top line of the display.
Press the scroll button (➛ or ❿) until you see “Clear Memory” on the
bottom line and press Enter.
The first available menu item, “Clear All Mem.” displays on the bottom line
.
3
Press the scroll button (➛ or ❿) until you see the item you want to clear.
• Clear All Mem.: Clears all of the data stored in memory and resets all
of your settings to the factory default.
• Paper Setting: Restores all of the Paper Setting options to the factory
default.
• Copy Setup: Restores all of the Copy Setup options to the factory
default.
• Fax Setup: Restores all of the Fax Setup options to the factory
default.
• Fax Feature: Cancels all of the scheduled fax jobs in the machine’s
memory.
• Advanced Fax: Restores all of the Advanced Fax setting options to
the factory default.
• Sound/Volume: Resets the sound and volume settings to the factory
default.
• Machine Setup: Resets all of the system settings, such as the
machine ID, time and date, display language and save modes, to the
factory default.
• Sent Report: Clears all the records of your faxes sent.
• RCV Report: Clears all the records of your faxes received.
• Phone Book: Clears the one-touch, speed and group dial numbers
stored in memory.
4
5
Press Enter. The selected memory is cleared and the display asks you
to continue clearing the next item.
To clear another item, press Enter and repeat steps 3 and 4.
OR
To return to Standby mode, press Stop/Clear.
MAINTENANCE
5.2
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting Shading
When the scan unit becomes dirty, it can alter the shading value. If your
copy has black lines or is blurred, adjust the shading setting.
1
2
Load a sheet of white paper into the ADF.
Press Menu on the control panel until “Maintenance” appears on the
top line of the display.
3
4
Press the scroll button (➛ or ❿) until “Adjust Shading” appears on the
bottom line and press Enter.
Press the scroll button (➛ or ❿) to select “On” and press Enter.
Your machine picks up the paper and adjusts the shading value.
Cleaning Your Machine
To maintain the print quality, follow the cleaning procedures below each
time the toner cartridge is replaced or if print quality problems occur.
NOTES
:
• While cleaning the inside of the machine, be careful not to touch the transfer
roller, located underneath the toner cartridge. Oil from your fingers can cause
print quality problems.
• Cleaning the cabinet of your machine with products containing large amounts
of alcohol, solvent or other strong substances can discolor or crack the
cabinet.
Cleaning the Outside
Clean the cabinet of the machine with a soft lint-free cloth. You can dampen
the cloth slightly with water, but be careful not to let any water drip onto or
inside the machine.
5
Cleaning the Inside
During the printing process, paper, toner and dust particles can accumulate
inside the machine. This buildup can cause print quality problems, such as
toner specks or smearing. Cleaning the inside of the machine clears or
reduces these problems.
1
Turn the machine off and unplug the power cord. Wait for the machine
to cool down.
2
Open the front cover and pull the toner cartridge out, lightly pushing it down.
MAINTENANCE
5.3
Download from Www.Somanuals.com. All Manuals Search And Download.
3
With a dry lint-free cloth, wipe away any dust and spilled toner from
the toner cartridge area and the toner cartridge cavity.
CAUTION: To prevent damage to the toner cartridge, do not expose it to light
for more than a few minutes. Cover it with a piece of paper, if necessary. Do not
touch the black transfer roller inside the machines.
4
5
Reinsert the toner cartridge and close the cover.
Plug in the power cord and turn the machine on.
Cleaning the Scanning Glass
Keeping the scanning glass clean helps ensure the best possible copies. We
suggest that you clean the scanning glass at the start of each day and
during the day, as needed.
1
2
Slightly dampen a soft lint-free cloth or paper towel with water.
Open the control panel by gripping its top and pulling it.
3
Carefully wipe the scanning glass with a soft dry cloth.
If the glass is very dirty, first wipe it with a slightly dampened cloth,
and then with a dry cloth. Be very careful not to scratch the glass
surface.
4
Close the control panel firmly until it clicks into place.
CAUTION: When closing the ope control, strongly push the LCD projection part in
the center portion of ope control. If it is not fully closed, JAM is likely to occur.
MAINTENANCE
5.4
Download from Www.Somanuals.com. All Manuals Search And Download.
Maintaining the Toner Cartridge
Toner Cartridge Storage
To get the most from the toner cartridge, keep the following guidelines in mind:
• Do not remove the toner cartridge from its package until it’s ready to use.
• Do not refill the toner cartridge. The machine warranty does not
cover damage caused by using a refilled cartridge.
• Store toner cartridges in the same environment as your machine.
• To prevent damage to the toner cartridge, do not expose it to light for
more than a few minutes.
Saving Toner
To save toner, press the Toner Save button on the machine control panel;
the life of the toner cartridge and reduces your cost per page, but it also
reduces the print quality.
Expected Cartridge Life
The life of the toner cartridge depends on the amount of toner that print
jobs require. When printing text at IDC 5 % coverage, a new toner cartridge
lasts an average of 3,000 pages. The actual number may be different
depending on the print density of the page you print on. If you print a lot of
graphics, you may need to change the cartridge more often.
Redistributing Toner
When the toner cartridge is near the end of its life, white streaks or light
print occurs. The LCD displays the warning message, “[Toner Low].” You can
temporarily reestablish the print quality by redistributing the remaining
toner in the cartridge.
5
1
2
Open the front cover.
Pull the toner cartridge out and gently roll the cartridge 5 or 6 times to
distribute the toner evenly inside the cartridge.
NOTE: If the toner gets on your clothing, wipe it off with a dry cloth and wash
clothing in cold water. Hot water sets the toner into fabric.
3
Reinstall the cartridge and close the front cover.
MAINTENANCE
5.5
Download from Www.Somanuals.com. All Manuals Search And Download.
Replacing the Toner Cartridge
When the toner eventually runs out, only blank pages print when a print job
is sent or when a fax is received. At this stage, the toner cartridge needs to
be replaced. The display on the control panel shows the warning message,
“[Toner Empty]” and the machine stops printing.
NOTE: You can set the machine to ignore the “[Toner Empty]” message and
continue printing. See page 5.7.
1
2
3
Open the front cover.
Lightly pushing the used cartridge down, pull the cartridge out.
Unpack the new toner cartridge and gently roll it horizontally four or
five times to distribute the toner evenly inside the cartridge.
Save the box and the plastic bag for shipping.
Slide the new toner cartridge in until it locks into place.
Close the front cover.
4
5
Setting the Notify Toner Option
If you have set the Notify Toner menu option to “On”, your machine
automatically sends a fax to your service company or the dealer to notify
them that your machine requires a new toner cartridge when the toner
cartridge needs to be replaced. The fax number is preset by your dealer
when you bought your machine.
1
Press Menu on the control panel until “Maintenance” appears on the
top line of the display.
The first available menu item, “Clean Drum,” displays on the bottom line.
2
3
Press the scroll button (➛ or ❿) to display “Notify Toner ” on the
bottom line and press Enter.
Press the scroll button (➛ or ❿) to change the setting.
Select “On” to enable this feature. Selecting “Off” disables this feature.
Press Enter to save the selection.
4
Cleaning the Drum
If there are streaks or spots on your print, the OPC drum of the cartridge
may require cleaning.
1
Before setting the cleaning procedure, make sure that paper is loaded
in the machine.
2
Press Menu on the control panel until “Maintenance” appears on the
top line of the display.
The first available menu item, “Clean Drum,” displays on the bottom line.
Press Enter.
3
4
When the display asks you to confirm your selection, press Enter.
The machine prints a cleaning page. Toner particles on the drum
surface are affixed to the paper.
5
If the problem remains, repeat steps 1 through 4.
MAINTENANCE
5.6
Download from Www.Somanuals.com. All Manuals Search And Download.
Ignoring the Toner Empty Message
When the toner cartridge is empty, the machine shows a “[Toner Empty]”
message and stops printing.
You can set the machine to ignore the message when it displays and to
continue printing the pages.
1
2
Press Menu until “Machine Setup” appears on the display.
Press the scroll button (➛ or ❿) until “Ignore Toner” appears on the
bottom line and press Enter.
3
Press the Scroll button (➛ or ❿) to select “On” or “Off.”
Select “On” to ignore the Toner Empty message.
Select “Off” to stop printing when the message appears. This is the
default setting.
4
Press Enter to save the selection.
Consumables and Replacement Parts
From time to time, you need to replace the toner cartridge, roller and fuser
unit to maintain top performance and to avoid print quality problems and
paper feed problems resulting from worn parts.
The following items should be replaced after you have printed a specified
number of pages:
Items
ADF rubber pad
Yield (Average)
20,000
ADF roller
60,000
5
Paper feeding roller
Transfer roller
Fuser unit
60,000
60,000
60,000
To purchase the consumables and replacement parts, contact your
Samsung dealer or the retailer where you bought your machine. We
strongly recommend that items be installed by a trained service
professional, except for the toner cartridge (see page 5.6) and the ADF
rubber pad (see page 5.8).
MAINTENANCE
5.7
Download from Www.Somanuals.com. All Manuals Search And Download.
Replacing the ADF Rubber Pad
You can purchase an ADF rubber assembly from a Samsung dealer or the
retailer where you bought your machine.
1
2
Open the control panel by gripping its top and pulling on it.
Squeeze the tab at the bottom of the ADF rubber assembly and then
pull it out.
3
Insert the tabs at the top of the new ADF rubber assembly into the
slots and then push it down until it locks into place.
4
Close the control panel firmly until it clicks into place.
MAINTENANCE
5.8
Download from Www.Somanuals.com. All Manuals Search And Download.
Clearing Document Jams
When a document jams while it passes through the ADF (Automatic
Document Feeder), “[Document Jam]” appears on the display.
1
2
Remove the remaining documents from the ADF.
Pull the jammed document gently out of the ADF. Skip to step 5.
If there is any resistance and the document does not move when you
pull it, continue to the next step.
3
Open the control panel by gripping its top and pulling on it.
4
5
Pull the document gently out of the ADF and close the control panel.
Load the documents back into the ADF.
NOTE: To prevent document jams, do not use thick, thin or mixed documents.
CAUTION: When closing the ope control, strongly push the LCD projection part in
the center portion of ope control. If it is not fully closed, JAM is likely to occur.
TROUBLESHOOTING
6.2
Download from Www.Somanuals.com. All Manuals Search And Download.
Clearing Paper Jams
When a paper jam occurs, “Paper Jam” appears on the display. Refer to the
table below to locate and clear the paper jam.
Message
Location of Jam
Go to
[Paper Jam 0]
Open/Close Door
In the paper tray.
(Tray 1 or Tray 2)
[Paper Jam 1]
Open/Close Door
In the fuser area or around the
toner cartridge.
In the manual feeder
In the paper exit area
[Paper Jam 2]
Check Inside
To avoid tearing the paper, pull the jammed paper out gently and slowly.
Follow the steps on the following sections to clear the jam.
In Tray 1
1
Open and close the front cover. The jammed paper automatically exits
the machine.
If the paper does not exit, continue to step 2.
Pull Tray 1 open.
2
3
Remove the jammed paper by gently pulling it straight out.
6
If there is any resistance and the paper does not move when you pull
or if you cannot see the paper in this area, skip to the fuser area
around the toner cartridge. See page 6.5.
4
5
Insert the paper tray into the machine until it snaps into place.
Open and close the front cover to resume printing.
TROUBLESHOOTING
6.3
Download from Www.Somanuals.com. All Manuals Search And Download.
In Tray 2
1
Open and close the front cover. The jammed paper automatically exits
the machine.
If the paper does not exit, continue to step 2.
2
3
Pull Tray 2 open.
Remove the jammed paper by gently pulling it straight out.
4
5
Insert the paper tray into the machine until it snaps into place.
Open and close the front cover to resume printing.
In the Paper Exit Area
1
Open and close the front cover. The jammed paper automatically exits
the machine.
If the paper does not exit, continue to step 2.
2
Gently pull the paper out of the front output tray. Skip to step 6.
If there is any resistance and the paper does not move when you pull or if
you cannot see the paper in the front output tray, continue to step 3.
3
Open the rear cover.
TROUBLESHOOTING
6.4
Download from Www.Somanuals.com. All Manuals Search And Download.
4
Remove the jammed paper by gently pulling it straight out.
5
6
Close the rear cover.
Open and close the front cover to resume printing.
In the Fuser Area or Around the Toner Cartridge
NOTE: The fuser area is hot. Take care when removing paper from the machine.
1
2
Open the front cover and pull the toner cartridge out, lightly pushing it down.
Remove the jammed paper by gently pulling it straight out.
6
3
Replace the toner cartridge and close the front cover. Printing
automatically resumes.
TROUBLESHOOTING
6.5
Download from Www.Somanuals.com. All Manuals Search And Download.
In the Manual Feeder
“
” appears on the display when you try to print using the
manual feeder and the machine does not detect paper, due to no paper or
improper paper loading.
The error message may also occur when the paper is not properly fed into
the machine through the manual feeder. In that case, pull the paper out of
the machine.
Tips for Avoiding Paper Jams
By selecting the correct paper types, most paper jams can be avoided.
When a paper jam occurs, follow the steps outlined in page 6.3.
adjustable guides are positioned correctly.
• Do not overload the paper tray. Ensure that the paper is below the paper
capacity mark on the inside wall of the paper tray.
• Do not remove the paper from the tray while your machine is printing.
• Flex, fan and straighten the paper before loading.
• Do not use creased, damp or highly curled paper.
• Do not mix paper types in the paper tray.
• Use only recommended print materials. See “Paper Specifications” on
• Ensure that the print side of print materials is facing down in the paper
tray and facing up in the manual feeder.
TROUBLESHOOTING
6.6
Download from Www.Somanuals.com. All Manuals Search And Download.
Clearing LCD Error Messages
Messages appear on the display of the control panel to indicate the
machine’s status or errors. Refer to the following table to understand the
messages and correct the problem, if necessary. Messages and their
meanings are listed in alphabetical order.
Display
Cancel ?
Meaning
Suggested solutions
Your machine’s memory has
become full while
To cancel the fax job, press the No 1
button “Yes.”
1:Yes 2:No
documents were being
loaded into memory.
If you want to send the pages
already stored, press the No 2
button “No.” You should send the
remaining pages later when the
memory is available.
[Comm. Error]
CRU Fuse Error
The machine has a
communication problem.
Ask the sender to try again.
The machine has a problem
with recognizing the new
toner cartridge.
Please contact a service
representative or re-install the
catridge.
[Document Jam]
The loaded document has
jammed in the ADF
(Automatic Document
Feeder).
Clear the document jam. See
[Door Open]
The front or rear cover is not
securely latched.
Close the cover until it locks into
place.
Group Not
Available
You have tried to select a
group location number where
only a single location number
can be used, such as when
adding locations for a
Just use a one-touch or speed dial
number or dial a number manually
using the number keypad.
broadcasting operation.
[Incompatible]
The remote machine does
not have the requested
feature, such as a delayed
transmission.
Reconfirm the remote machine’s
features.
It also occurs if the remote
machine does not have
enough memory space to
complete the operation you
are attempting.
6
[Jam 1] or
[No Cartridge]
The toner cartridge is not
installed.
Install the toner cartridge. See
[Line Busy]
The remote person did not
answer or the line is already
engaged.
Try again after a few minutes.
[Line Error]
Your machine cannot connect
with the remote machine or
has lost contact because of a
problem with the phone line.
Try again. If the problem persists,
wait an hour or so for the line to
clear and try again.
TROUBLESHOOTING
6.7
Download from Www.Somanuals.com. All Manuals Search And Download.
Display
Meaning
Suggested solutions
Load Document
You have attempted to set up
a copy or fax operation with
no document loaded.
Load a document and try again.
Low Heat Error
Open Heat Error
[Over Heat]
There is a problem in the
fuser unit.
Unplug the power cord and plug it
back in. If the problem persists,
please contact a service
representative.
[LSU Error]
A problem has occurred in
the LSU (Laser Scanning
Unit).
Unplug the power cord and plug it
back in. If the problem persists,
please call for service.
Memory Full
[No Answer]
The memory is full.
Delete unnecessary documents,
retransmit after more memory
becomes available or split the
transmission into more than one
operation.
The remote fax machine has
not answered after several
redial attempts.
Try again. Make sure that the
remote machine is operational.
No. Not
Assigned
The one-touch or speed dial
location you tried to use has
no number assigned to it.
Dial the number manually using the
number keypad or assign the
number. For storing a number, see
[No Paper]
Add Paper
The paper tray has run out of
paper.
Load paper in the paper tray. See
Operation Not
Assigned
You are in the Add/Cancel
operation, but there are no
jobs waiting.
Check the display to see if there are
any scheduled jobs. The display
should indicate them in Standby
mode, for example, DelayFax.
[Paper Jam 0]
Open/Close Door
Paper has jammed in the
feeding area of the paper
tray.
Clear the jam. See page 6.3.
[Paper Jam 1]
Open/Close Door
• Paper has jammed in the
paper exit area.
• A paper jam has occurred in
the manual feeder or the
machine detects non-feeding
from the manual feeder.
[Paper Jam 2]
Check Inside
Paper has jammed in the
fuser area.
Clear the jam. See page 6.4.
[Power Failure]
Power has turned off then on
and the machine’s memory
has not been saved.
You need to restart the job you were
trying to do before the power
failure.
TROUBLESHOOTING
6.8
Download from Www.Somanuals.com. All Manuals Search And Download.
Display
Meaning
Suggested solutions
[Retry Redial?]
The machine is waiting for a
specified time interval to
redial a previously busy
station.
You can press Enter to immediately
redial, or Stop/Clear to cancel the
redial operation.
[Stop Pressed]
[Toner Empty]
[Toner Low]
The Stop/Clear button is
pressed during a copy or fax
operation.
Try again.
The toner cartridge has run
out. The machine stops
printing.
Replace with a new toner cartridge.
The toner cartridge is almost
empty.
Take out the toner cartridge and
gently shake it. By doing this, you
can temporarily reestablish printing
operations.
6
TROUBLESHOOTING
6.9
Download from Www.Somanuals.com. All Manuals Search And Download.
Solving Problems
The following chart lists some conditions that may occur and the
recommended solutions. Follow the suggested solutions until the problem
is corrected. If the problem persists, please call for service.
Paper Feeding Problems
Condition
Suggested solutions
Clear the paper jam. See page 6.3.
Paper is jammed during
printing.
Paper sticks together.
• Ensure that there is not too much paper in the paper tray. The
paper tray can hold up to 250 sheets of paper, depending on the
thickness of your paper.
• Remove paper from the paper tray and flex or fan the paper.
• Humid conditions may cause some paper to stick together.
Multiple sheets of paper
do not feed.
• Different types of paper may be loaded in the paper tray. Load the
paper of only one type, size and weight.
• If multiple sheets have caused a paper jam, clear the paper jam.
Paper does not feed into
the machine.
• Remove any obstructions from inside the machine.
• Paper has not been loaded correctly. Remove paper from the tray
and reload it correctly.
• There is too much paper in the paper tray. Remove excess paper
from the tray.
• The paper is too thick. Use only paper that meets the specifications
required by the machine. See “Paper Specifications” on page A.6.
The paper keeps jamming.
• There is too much paper in the paper tray. Remove excess paper
from the tray.
• An incorrect type of paper is being used. Use only paper that
meets the specifications required by the machine. See “Paper
Specifications” on page A.6. If you are printing on special
materials, use the manual feeder.
• There may be debris inside the machine. Open the front cover and
remove the debris.
Transparencies stick
together in the paper exit.
Use only the transparencies specifically designed for a laser
printer. Remove each transparency as it exits from the machine.
TROUBLESHOOTING
6.10
Download from Www.Somanuals.com. All Manuals Search And Download.
Copying Problems
Condition
Suggested solutions
Copies are too light or too dark.
Use the Darkness button to darken or lighten the
background of the copies.
Smears, lines, marks or spots
appears on copies.
• If defects are on the original document, press the Darkness
button to lighten the background of your copies.
• If no defects are on the original document, clean the scan
unit. See page 5.4.
Copy image is skewed.
• Ensure that the original document is positioned correctly in
the ADF (Automatic Document Feeder).
• Check that the copy paper is loaded correctly.
Blank copies print out.
Ensure that the original document is face down in the ADF.
Image rubs off the copy easily.
• Replace the paper in the paper tray with paper from a new
package.
• In high humidity areas, do not leave paper in the machine for
the extended periods of time.
Frequent copy paper jams
occurs.
• Fan the stack of paper, then turn it over in the paper tray.
Replace the paper in the tray with a fresh supply. Check/
adjust the paper guides, if necessary.
• Ensure that the paper is the proper paper weight. 75g/m2
(20 lb) bond paper is recommended.
• Check for copy paper or pieces of copy paper remaining in
the machine after a paper jam has been cleared.
Fewer copies from the toner
cartridge than expected prints
out.
• Your original documents may contain pictures, solids or
heavy lines. For example, they may be forms, newsletters,
books or other documents that use more toner.
• The machine may be frequently turned on and off.
Faxing Problems
Condition
Suggested solutions
The machine is not working,
there is no display and the
buttons are not working.
6
• Unplug the power cord and plug it in again.
• Ensure that there is power to the electrical receptacle.
No dial tone sounds.
• Check that the phone line is connected properly.
• Check that the phone socket in the wall is working by plugging
in another phone.
The numbers stored in the
memory do not dial
correctly.
Make sure that the numbers are stored in the memory
TROUBLESHOOTING
6.11
Download from Www.Somanuals.com. All Manuals Search And Download.
Condition
Suggested solutions
The document does not feed
into the machine.
• Make sure that the document is not wrinkled and you are
putting it in correctly. Check that the document is the right size,
not too thick or thin.
• Make sure that the control panel is firmly closed.
Faxes are not received
automatically.
• Fax mode should be selected.
• Make sure that there is paper in the tray.
• Check to see if the display shows “Memory Full.”
The machine does not send.
• Make sure that the document is loaded in the ADF.
• “TX” should show up on the display.
• Check the other fax machine you are sending to, to see if it can
receive your fax.
The incoming fax has blank
spaces or is received with a
poor-quality.
• The fax machine sending you the fax may be faulty.
• A noisy phone line can cause line errors.
• Check your machine by making a copy.
• The toner cartridge may be empty. Replace the toner cartridge,
referring to page 5.6.
Some of the words on an
incoming fax are stretched.
The fax machine sending you the fax had a temporary
document jam.
There are lines on the
documents you send.
Check your scan unit for marks and clean it. See page 5.4.
The machine dials a number,
but a connection with
another fax machine fails.
The other fax machine may be turned off, out of paper, or
cannot answer incoming calls. Speak with the other machine
operator and ask her/him to clear out the problem.
Documents do not store in
memory.
There may not be enough memory space to store the
document. If the display shows a “Memory Full” message,
delete any documents you no longer need from the memory
and then restore the document.
Blank areas appear at the
bottom of each page or on
other pages, with a small
strip of text at the top.
You may have chosen the wrong paper settings in the user
option setting. See page 1.15.
TROUBLESHOOTING
6.12
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing an Optional Tray
You can increase the paper handling capacity of your machine by installing
an optional Tray 2. This tray holds 250 sheets of paper.
1
2
Turn the machine off and unplug all cords from the machine.
Remove the packing material from the tray and remove the tape fixing
the interface cable to the tray.
3
Find the location of the connector and the optional tray positioners.
4
Place the machine over the tray, aligning the feet on the machine with
the positioners in the optional tray.
A.2
Download from Www.Somanuals.com. All Manuals Search And Download.
5
Plug the interface cable of the tray into the optional tray connector on
the back of the machine.
6
7
Load paper in the optional paper tray. The instructions for loading
paper in this tray is the same as you would when loading the standard
paper tray. See page 1.8.
Reconnect the cords and then turn the machine on.
Setting the Paper Type and Size for Tray 2
After installing the optional Tray 2 and loading paper in the tray, you need
to set the paper type and size using the control panel buttons.
1
Press Menu.
The display shows “Paper Setting” on the top line and the first menu
item, “Paper Type,” on the bottom line.
2
3
Press Enter to access the menu item.
Use the scroll button (
➛
or
❿
)
to find the paper type you are using and
press Enter to save it.
4
5
6
Press the
the menu item.
❿
button to scroll to “Paper Size” and press Enter to access
Press the scroll button (
bottom line.
➛
or
❿) until “Tray 2 Size” appears on the
Use the scroll button (
press Enter to saves it.
➛
or
❿) to find the paper size you are using and
To return to Standby mode, press Stop/Clear.
A
A.3
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
General Specifications
Item
Description
Up to 50 sheets (weight: 75 g/m2, 20 lb)
Automatic document feeder
(ADF)
ADF Document size
Width: 142 to 216 mm (5.6 to 8.5 inches)
Length: 148 to 356 mm (5.8 to 14 inches)
Paper tray: 250 sheets (weight: 75 g/m2, 20 lb)
Manual feeder: 1 sheet
Paper input capacity
Optional paper tray: 250 sheets (weight: weight: 75 g/m2, 20 lb)
Paper output capacity
Front output tray: 150 sheets (face down)
Rear output slot: 1 sheet (face up)
Consumables
1-piece toner cartridge system
Power requirements
100 ~ 127 VAC, 50/60 Hz, 4.5A
220 ~ 240 VAC, 50/60 Hz, 2.5A
Power consumption
Noise
Sleep mode: 15 W(100 ~ 127 VAC) / 15 W(220~240 VAC)
Standby mode: 75W(100 ~ 127 VAC) / 75 W(220 ~ 240 VAC)
Average: 320 W
Warm-up: 52 dB
Standby mode: 39 dB
Scanning: 52 dB
Printing: 52 dB
Warm-up Time
35 seconds
Temperature: 50 oF to 89 oF (10 oC to 32 oC)
Humidity: 20 % to 80 % RH
Operating conditions
LCD
16 characters x 2 lines
Toner cartridge life
SET dimension (W x D x H)
3,000 pages @ IDC 5 % coverage
Main: 388 x 417 x 335 mm
SCF: 386 x 392 x 90 mm
Net: 11Kg (including consumables)
Gross: 14Kg (including consumables, accessories and package)
SCF: 2.5 Kg
Weight
Package Weight
Paper: 2.7 Kg
Plastic: 0.7 Kg
A.4
Download from Www.Somanuals.com. All Manuals Search And Download.
Copier Specifications
Item
Scan method
Scan length
Description
Color CIS
Maximum: 15.7 inches (400 mm)
Scan width
Maximum 8.5 inches (216 mm)
Effective 8.2 inches (208 mm)
Copy speed (SDMC)
Copy speed (MDMC)
Letter: 17 copies per minute
A4: 16 copies per minute
Letter: 8 copies per minute
A4: 7 copies per minute
Copy resolution
Zoom rate
600 x 300 dpi (optical)/ 600 X 600 (printing)
50 ~ 200 %
99 pages
Multiple copies
Bit depth
1 bit for Text mode
8 bit for Gray mode
Halftone
256 levels
Facsimile Specifications
Item
Compatibility
Applicable line
Data coding
Description
ITU-T Group 3
Public Switched Telephone Network (PSTN) or behind PABX
MH/MR/MMR (ECM Mode)/JBIG
Modem speed
33600/31200/28800/26400/24000/21600/19200/16800/
14400/12000/9600/7200/4800/2400 bps with fall back
Transmission speed
Approx. 3 seconds/page
* Transmission time applies to memory transmission of text
data with ECM compression using only ITU-T No.1 Chart.
Scan speed
Paper type
Approx. 1.5 seconds/LTR (at standard fax resolution mode)
Plain paper (60 ~ 90 g/m2, 16 ~ 24 lb)
Letter, A4, Legal, Executive, Folio , B5
Paper size
Resolution
Standard: 203 x 98 dpi
Fine: 203 x 196 dpi
Super Fine: 300 x 300 dpi
Photo: 203 x 196 dpi
User Memory
Halftone
5 MB
A
256 levels
Auto dialer
One-touch dialing (up to 40 numbers)
Speed dialing (up to 150 numbers)
A.5
Download from Www.Somanuals.com. All Manuals Search And Download.
Paper Specifications
Overview
Your machine accepts a variety of print materials, such as cut-sheet paper, including up to 100 %
recycled fiber content paper, labels and transparencies. Properties, such as weight, composition,
grain and moisture content, are important factors affecting the machine’s performance and the
output quality. Paper that does not meet the guidelines outlined in this user’s guide can cause the
following problems:
• Poor print quality
• Increased paper jams
• Premature wear on the machine.
NOTES
:
• Some paper may meet all of the guidelines in this guide and still not produce satisfactory results. This
may be the result of improper handling, unacceptable temperature and humidity levels or other
variables over which Samsung has no control.
• Before purchasing large quantities of paper, insure the paper meets the requirements specified in this
user’s guide.
CAUTION: Using paper that does not meet these specifications may cause problems, requiring repairs.
These repairs are not covered by Samsung’s warranty or service agreements.
Supported Sizes of Paper
Capacity*
Size (mm/in.)
Plain paper
Letter (215.9 x 279/8.5 x 11)
A4 (210 x 297/8.27 x 11.69)
Folio (215.9 x 330.2/8.5 x 13)
Legal (215.9 x 355.6/8.5 x 14)
Executive (184.2 x 266.7/7.25 x 10.5)
B5(182 x 257/7.2 x 10)
Weight
• 60 to 90 g/m2 bond (16
to 24 lb) for the paper
tray (Tray 1/2)
• 60 to 163 g/m2 bond (16
to 43 lb) for the manual
feeder
• 250 sheets of 75 g/m2
bond (20 lb) paper for
the paper tray (Tray 1/
2)
• 1 sheet of paper for the
manual feeder
Labels
Letter (215.9 x 279/8.5 x 11)
A4 (210 x 297/8.27 x 11.69)
120 to 150 g/m2
138 to 146 g/m2
1 sheet of paper for the
manual feeder
Transparencies
Letter (215.9 x 279/8.5 x 11)
A4 (210 x 297/8.27 x 11.69)
* Capacity may vary depending on print materials’ weight and thickness, and environmental conditions.
NOTE: You may experience jams when using print materials with a length of less than 127 mm (5 in.).
For optimum performance, ensure that you are storing and handling the paper correctly. Please refer to
A.6
Download from Www.Somanuals.com. All Manuals Search And Download.
Guidelines for Using Paper
For best results, use conventional 75 g/m2 (20 lb) paper. Ensure that the paper is of good quality,
and free of cuts, nicks, tears, spots, loose particles, dust, wrinkles, voids, and curled or bent edges.
If you are unsure of what type of paper you are loading, such as bond or recycled paper, check the
label on the package.
The following problems may cause print quality deviations, jamming or even damage to the
machine:
Symptom
Problem with Paper
Solution
Poor print quality or toner
adhesion, problems with
feeding
Too moist, too rough, too
smooth or embossed; faulty
paper lot
Try another kind of paper,
between 100 ~ 400 Sheffied, 4
~ 5 % moisture content.
Dropout, jamming, curl
Stored improperly
Store paper flat in its moisture-
proof wrapping.
Increased gray background
shading/machine wear
Too heavy
Use lighter paper, use the rear
output slot.
Excessive curl problems
with feeding
Too moist, wrong grain
direction or short-grain
construction
Use the rear output slot.
Use long-grain paper.
Jamming, damage to
machine
Cutouts or perforations
Do not use paper with cutouts or
perforations.
Problems with feeding
Ragged edges
Use good quality paper.
NOTES
:
• Do not use letterhead paper printed with low-temperature inks, such as those used in certain types of
thermography.
• Do not use raised or embossed letterhead.
• The machine uses heat and pressure to fuse toner to the paper. Insure that any colored paper or
preprinted forms use inks that are compatible with this fusing temperature (200 °C or 392 °F for 0.1
second).
Paper Specifications
Category
Specifications
Acid Content
Caliper
5.5 pH or lower
0.094 ~ 0.18 mm (3.0 ~ 7.0 mils)
Flat within 5 mm (0.02 in.)
Curl in Ream
Cut Edge Conditions
Fusing Compatibility
Cut with sharp blades with no visible fray.
Must not scorch, melt, offset or release hazardous
emissions when heated to 200 °C (392 °F) for 0.1
second.
A
Grain
Long Grain
Moisture Content
Smoothness
4 % ~ 6 % by weight
100 ~ 400 Sheffied
A.7
Download from Www.Somanuals.com. All Manuals Search And Download.
Paper Storage Environment
Paper storage environmental conditions directly affect the feed operation.
Ideally, the machine and paper storage environment should be at or near room temperature, and
not too dry or humid. Remember that paper is hygroscopic; it absorbs and loses moisture rapidly.
Heat works with humidity to damage paper. Heat causes the moisture in paper to evaporate, while
cold causes it to condense on the sheets. Heating systems and air conditioners remove most of the
humidity from a room. As paper is opened and used, it loses moisture, causing streaks and
smudging. Humid weather or water coolers can cause the humidity to increase in a room. As paper
is opened and used it absorbs any excess moisture, causing light print and dropouts. Also, as paper
loses and gains moisture it can become distorted. This can cause paper jams.
Care should be taken not to purchase more paper than can be used in a short time (about 3 months).
Paper stored for long periods may experience heat and moisture extremes, which can cause
damage. Planning is important to prevent damage to large supplies of paper.
Unopened paper in sealed reams can remain stable for several months before use. Opened packages
of paper have more potential for damage, especially if they are not wrapped with a moisture-proof
barrier.
The paper storage environment should be properly maintained to ensure optimum performance. The
required condition is 20 to 24 °C (68 to 75 °F), with a relative humidity of 45 % to 55 %. The
following guidelines should be considered when evaluating the paper’s storage environment:
• Paper should be stored at or near room temperature.
• The air should not be too dry or too humid.
• The best way to store an opened ream of paper is to rewrap it tightly in its moisture-proof
wrapping. If the machine environment is subject to extremes, unwrap only the amount of paper
to be used during the day’s operation to prevent unwanted moisture changes.
A.8
Download from Www.Somanuals.com. All Manuals Search And Download.
INDEX
A
E
automatic dialing
F
fax system, set
B
G
group dial
C
canceling
Cleaning
cleaning
J
jam, clear
connection
copy
M
O
one-touch dial
P
D
display language, change
document
print
DRPD (Distinctive Ring Pattern Detection)
problem, solve
Download from Www.Somanuals.com. All Manuals Search And Download.
R
receiving a fax
reduced/enlarged
S
sending a fax
specifications
speed dial
T
toner cartridge
V
volume, adjust
Download from Www.Somanuals.com. All Manuals Search And Download.
Country
HUNGARY
Customer Care Center
06 40 985 985
Web Site
ITALIA
199 153 153
LUXEMBURG
02 261 03 710
NETHERLANDS 0900 20 200 88
(€ 0,10/min)
NORWAY
POLAND
PORTUGAL
SLOVAKIA
SPAIN
231 627 22
0 801 801 881
80 8 200 128
0850 123 989
902 10 11 30
08 585 367 87
0870 242 0303
8-800-200-0400
8-800-502-0000
1300 362 603
SWEDEN
U.K
RUSSIA
UKRAINE
AUSTRALIA
CHINA
800-810-5858
010- 6475 1880
HONG KONG
INDIA
2862 6001
3030 8282
1600 1100 11
INDONESIA
JAPAN
0800-112-8888
0120-327-527
1800-88-9999
MALAYSIA
PHILIPPINES
1800-10-SAMSUNG
(7267864)
SINGAPORE
THAILAND
1800-SAMSUNG (7267864)
1800-29-3232
02-689-3232
TAIWAN
0800-329-999
1 800 588 889
VIETNAM
SOUTH AFRICA 0860 7267864 (SAMSUNG)
U.A.E 800SAMSUNG (7267864)
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Visit us at:
Home
P/N.JC68-01269A Rev.2.00
Download from Www.Somanuals.com. All Manuals Search And Download.
|