Renesas Computer Hardware 7542 User Guide

Renesas Starter Kit for 7542  
Quick Start  
LCD module  
E8a header  
Application Board Interface  
Reset switch  
LCD module  
connector  
Application Board Interface  
E8a emulator  
User LEDs  
Analog adjust  
User switches  
Voltage Conversion Board  
(for QzROM microcontroller)  
D007294_11_S01_V03  
Download from Www.Somanuals.com. All Manuals Search And Download.  
25. On the Project Generator Information window: Click <OK>.  
The project that is created has two configurations. The Release configuration can be used for the final release code  
version. The Debug configuration allows modifications to the configuration for debugging.  
26. Select the Debug build configuration in the left hand drop down list on the toolbar.  
27. Click on the “Build” icon to compile, assemble and link the project.  
4. Programming and Debug  
28. Ensure the “Session740_E8a_SYSTEM” session in the right hand drop down list on the toolbar is selected.  
29. Click the <Connect> button on the debug toolbar.  
30. The “Emulator Setting” dialog will be shown. Select the  
correct MCU group and device type (e.g. 7542 Group and  
M37542F8_RSK for RSKM37542).  
31. Select “Erase Flash and Connect”.  
32. If the E8a is to provide power to the CPU board, select  
“Power Target from Emulator” and choose the “5.0V” option.  
Otherwise connect a 5V centre positive supply.  
33. Click <OK>.  
34. Accept any dialog warning that an older version of E8a firmware is necessary to work with the application. Allow  
download of firmware to complete, this may take several seconds.  
The connection to the Renesas Starter Kit will be completed and will activate the debugger buttons on the  
High-performance Embedded Workshop toolbar.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
35. Right click on the download module listed in the left  
hand pane and select “Download”.  
The code will be downloaded to the microcontroller.  
This may take several seconds.  
36. Click the <Reset Go> button.  
The code will run and you will see the LEDs flash on the board.  
37. Click the <Stop> button.  
The code will stop and the source code will be opened at the current program counter.  
5. Next Step  
After you have completed this quick start procedure, please review the tutorial code and sample code that came with  
the kit. You can add projects to the current workspace by selecting (Project > Insert Project) from the main menu.  
The tutorials will help you understand the device and development process using Renesas Development Tools.  
The Hardware manual supplied with this kit is current at the time of publication. Please check for any updates to the  
device manual from the Renesas website at: www.renesas.com/renesas_starter_kits  
6. Support  
Online technical support and information is available at: www.renesas.com/renesas_starter_kits  
Technical Contact Details  
America:  
Europe:  
Japan:  
Note on Autoupdate: The Autoupdater is configured to automatically add itself to the Startup folder in the Windows  
Start Menu and use the registry defaults for access to the web. After restarting the machine the Icon will appear in  
the System Tray next to the clock. To change the settings or access Autoupdate simply right-click on the icon and  
use the menu that appears.  
© Renesas Solutions Corporation. 2007.  
© Renesas Technology Europe Ltd. 2007.  
© Renesas Technology Corporation. 2007.  
D007294_11_S01_V03  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Radio Shack Conference Phone 43 3911 User Guide
Rangemaster Oven R6012 User Guide
RCA Car Stereo System ANT501 User Guide
Renesas Computer Hardware H8S 2472 User Guide
Rotel Stereo Amplifier RA 1060 User Guide
Samsung Clothes Dryer DV209 User Guide
Samsung Digital Camera TL100 User Guide
Samsung Oven BT62CDBFST User Guide
Samsung Refrigerator SR L65 User Guide
Sears Sewing Machine 385 17928 User Guide