®
®
ProAir Ceramic
Model D-3200N
Please Read
Prior to Use
Download from Www.Somanuals.com. All Manuals Search And Download.
1. This hair dryer is provided with an
appliance leakage circuit interrupter
(ALCI) safety device built into the plug.
This device is designed to make the
unit inoperable under some abnormal
conditions, such as accidental immer-
sion in water. The ALCI safety device
is equipped with a test button so that
its operation can be checked.
2. Should the ALCI safety device trip (i.e., reset
button pop out) during use, press the reset
button. Should the dryer fail to reset, return
the dryer to Remington Customer Service for
examination and repair or replacement.
Never operate this appliance if it has been
dropped in water; return it to Remington
Customer Service for examination and repair
or replacement.
This unit should be tested before each
use to confirm that the safety device is
operational.
3. The dryer is designed to work on ordinary
household current only, 125 volts A.C.,
60 Hz. It is not intended for commercial use.
4. This appliance is equipped with an automatic
thermal limiter which will cycle off when
overheated and come back on when cooled
down. If the unit cycles off, unplug the cord
for several minutes before restarting.
TO TEST:
After plugging in your hair dryer:
A. Press the reset button on the
ALCI device.
B.Press the test button. The reset button
will pop out. This verifies that the
safety device is operating properly.
5. This appliance has a polarized plug (one
blade is wider than the other). As a safety
feature, this plug will fit in a polarized outlet
only one way. If the plug does not fit fully in
the outlet, reverse the plug. If it still does not
fit, contact a qualified electrician. Do not
attempt to defeat this safety feature.
C.Press the reset button to reactivate
your ALCI safety device.
D.Your hair dryer is now ready for use.
Note: This unit may automatically trip
when unplugged. If so, unit must be
reset after it is plugged in. After
following the above testing procedure,
should the indicator device not function
properly, return the dryer to Remington
Customer Service for examination and
repair or replacement.
Download from Www.Somanuals.com. All Manuals Search And Download.
®
ProAir Ceramic Features
• 1875 Watts
Air
Intake
Grille
• Ceramic radiant heat technology
• 4 heats and 2 speeds for styling control
• Cool Shot locks in style
Chrome Barrel
• Air Intake Grille – wipes clean easily
• Hang Loop for convenient storage
• Concentrator for straightening and spot drying
• Safety plug with test and retest features for
immersion shock protection
Concentrator
• UL listed
• Two-year warranty
Cool Shot Button
Speed Settings
Ceramic
Coated Grille
Ceramic Radiant Heat Technology
Ceramic emits far-infrared, radiant heat
to help dry water molecules inside the
hair strand. This fast and efficient
process helps prevent heat damage
for less frizz and more shine.
Hang Loop
Download from Www.Somanuals.com. All Manuals Search And Download.
No matter what style you ultimately achieve with this
dryer and a brush, (your hairdresser may recommend
a particular one), the first step is to remove most of
the moisture from your hair. Start by blotting hair dry
with a towel (rubbing creates tangles).
COOL SHOT
Once you fully dry your hair and fashion the style, press
the Cool Shot Button to “set” the style.
MAINTENANCE INSTRUCTIONS
1. Do not attempt to repair the appliance yourself.
Return to Remington Customer Service.
BEGIN TO SHAPE
With a wide tooth comb, start at the nape of your
neck and comb out small sections of hair at a time.
Put the dryer on HIGH Air Speed and your desired
heat setting. Rotate nozzle quickly all over head,
fluffing up hair with fingers. Starting at nape of neck
and moving up, brush hair from scalp out to the
ends, always following movement of brush with dryer
(keep dryer 8 inches from scalp). Then quickly do the
same thing in the direction hair is to go, starting from
the front and sides of head down to the nape,
brushing from scalp out to the ends.
2. Keep all intake openings clear of dust accumulation.
See “Cleaning Instructions” below. No other
maintenance or lubrication is required.
3. If the cord becomes twisted due to use, periodically
straighten. Store appliance and cord where they will
not be damaged. Do not wrap cord around dryer.
CLEANING INSTRUCTIONS
1. This dryer needs minimum maintenance to ensure
the best performance and long life.
2. The air filter should be cleaned regularly since a dirty
or clogged filter will impair the efficiency of the dryer.
3. To clean air filter, make sure dryer is turned off and
plug is pulled out of socket. Use soft bristle brush or
damp cloth to remove any particles that are lodged
in grille openings.
Hair should now be damp and ready for styling.
Adjust air speed and heat setting and you’re
ready to style.
HAIR TYPE
RECOMMENDED SETTINGS
STORAGE
Short and Curly
Low Airflow
High Airflow
Low Airflow
High Airflow
Low Airflow
High Airflow
High Airflow
Low Heat
When not in use, unplug the unit. Allow it to cool and
store out of reach of children in a safe, dry location.
Short and Sculptured
Mid-Length and Sculptured
Mid-Length and Sleek
Mid-Length or Long and Curly
Long and Sculptured
Long and Sleek
Medium Heat
High Heat
Never wrap the cord around the appliance as this will
cause the cord to wear prematurely and break. Handle
cord carefully for long life and avoid jerking, twisting
or straining, especially at plug connections.
High Heat
Medium Heat
Optima Heat
Optima Heat
Download from Www.Somanuals.com. All Manuals Search And Download.
No matter what style you ultimately achieve with this
dryer and a brush, (your hairdresser may recommend
a particular one), the first step is to remove most of
the moisture from your hair. Start by blotting hair dry
with a towel (rubbing creates tangles).
COOL SHOT
Once you fully dry your hair and fashion the style, press
the Cool Shot Button to “set” the style.
MAINTENANCE INSTRUCTIONS
1. Do not attempt to repair the appliance yourself.
Return to Remington Customer Service.
BEGIN TO SHAPE
With a wide tooth comb, start at the nape of your
neck and comb out small sections of hair at a time.
Put the dryer on HIGH Air Speed and your desired
heat setting. Rotate nozzle quickly all over head,
fluffing up hair with fingers. Starting at nape of neck
and moving up, brush hair from scalp out to the
ends, always following movement of brush with dryer
(keep dryer 8 inches from scalp). Then quickly do the
same thing in the direction hair is to go, starting from
the front and sides of head down to the nape,
brushing from scalp out to the ends.
2. Keep all intake openings clear of dust accumulation.
See “Cleaning Instructions” below. No other
maintenance or lubrication is required.
3. If the cord becomes twisted due to use, periodically
straighten. Store appliance and cord where they will
not be damaged. Do not wrap cord around dryer.
CLEANING INSTRUCTIONS
1. This dryer needs minimum maintenance to ensure
the best performance and long life.
2. The air filter should be cleaned regularly since a dirty
or clogged filter will impair the efficiency of the dryer.
3. To clean air filter, make sure dryer is turned off and
plug is pulled out of socket. Use soft bristle brush or
damp cloth to remove any particles that are lodged
in grille openings.
Hair should now be damp and ready for styling.
Adjust air speed and heat setting and you’re
ready to style.
HAIR TYPE
RECOMMENDED SETTINGS
STORAGE
Short and Curly
Low Airflow
High Airflow
Low Airflow
High Airflow
Low Airflow
High Airflow
High Airflow
Low Heat
When not in use, unplug the unit. Allow it to cool and
store out of reach of children in a safe, dry location.
Short and Sculptured
Mid-Length and Sculptured
Mid-Length and Sleek
Mid-Length or Long and Curly
Long and Sculptured
Long and Sleek
Medium Heat
High Heat
Never wrap the cord around the appliance as this will
cause the cord to wear prematurely and break. Handle
cord carefully for long life and avoid jerking, twisting
or straining, especially at plug connections.
High Heat
Medium Heat
Optima Heat
Optima Heat
Download from Www.Somanuals.com. All Manuals Search And Download.
Full Two-Year Warranty
Remington Products Company, L.L.C. warrants this product
against any defects that are due to faulty material or work-
manship for a two-year period from the original date of
consumer purchase. This warranty does not include damage
to the product resulting from accident or misuse.
If the product should become defective within the warranty
period, we will repair it or elect to replace it free of charge.
We will return your product, transportation charges prepaid,
provided it is delivered prepaid to: Remington Products
Company, L.L.C. 60 Main Street, Bridgeport, CT 06604,
Attention: Service Department. Include a letter indicating the
reason for the return.
REMINGTON SHALL NOT BE RESPONSIBLE FOR ANY
INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES.
This warranty gives you specific legal rights and you may
also have other rights which vary from state to state. Some
states do not allow the exclusion or limitation of incidental,
special or consequential damages.
REMINGTON MONEY BACK OFFER
If within 30 days after you have purchased your Remington
dryer, you are not satisfied and would like a refund, take back
the dryer and sales slip indicating purchase price and date of
purchase to the retailer from whom the dryer was purchased.
Remington will reimburse all retailers who accept this item
within 30 days from date of purchase. If you have any
questions concerning the money back guarantee, please
call 1-800-736-4648.
125 VAC, 60Hz, 1875W
This product is Listed by Underwriters
Laboratories.Inc. and bears the mark.
ట
Questions or Comments: Please call 1-800-736-4648
Remington Products Company, L.L.C.
60 Main Street
Bridgeport,CT 06604
MADE IN CHINA
Remington and ProAir are trademarks of Remington Corporation,L.L.C.
©2003 R.P.C.,L.L.C.Rev. 7/03 Job# WPCO3-084 Part# 14066
Download from Www.Somanuals.com. All Manuals Search And Download.
|