Regalo Safety Gate 1158 User Guide

Walk Thru Gate  
MODEL NO: 1158, 1160, & 1165  
Owner’s Manual  
11/25/2013_BL  
READ ALL INSTRUCTIONS BEFORE ASSEMBLY  
AND USE OF GATE.  
KEEP INSTRUCTIONS FOR FUTURE USE.  
...........................................................................  
Regalo International, LLC.  
3200 Corporate Center Drive, Suite 100  
Burnsville, MN 55306-9803, USA  
Toll Free: 866-272-5274  
Made in China  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Assembly and Installation Instructions  
Read and follow all instructions carefully to ensure that your gate and extensions are  
properly installed. Improper installation could result in the gate becoming unstable or  
dislodged from the doorway. Always make sure the extension is securely attached to the  
gate before using. The safety of your child is your responsibility. Please keep these  
instructions for your reference.  
NOTE:  
Never use more than two extensions per gate.  
It is preferable to install the extension on the hinge side of the gate. If you have an  
application that requires additional extensions, please contact the manufacturer.  
If hardware mounting to a surface other than drywall or wood, please consult with a  
professional about installation.  
If using this gate at the top of stairs, the four Wall Cups MUST be used.  
If not used, the gate may be dislodged from the opening.  
Intended for young children aged 6 months through 24 months.  
Check the gate regularly to see if all the hardware and mountings  
are tightened.  
To prevent serious injury or death, securely install gate or  
enclosure and use according to manufacturer’s instructions.  
Never use with a child able to climb over or dislodge the gate or  
enclosure.  
Never leave child unattended.  
Use only with the locking/latching mechanism securely engaged.  
Contact Regalo for questions and replacement parts.  
If in doubt about the use of your gate, call our customer care line 866-272-5274.  
Regalo International, LLC.  
3200 Corporate Center Drive, Suite 100  
Burnsville, MN 55306-9803, USA  
Made in China  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Check to make sure you have all of the parts shown:  
B.  
C.  
A.  
D.  
A. Gate Frame  
B. 4 Wall Cups  
C. 4 Screws (requires a Phillips/crosshead screwdriver)  
D. 4 Threaded Spindle Rods  
1
Download from Www.Somanuals.com. All Manuals Search And Download.  
Extensions List  
NOTE  
12  
8
6
4
Item NO.  
MAX Size  
29--58 inches  
1158  
29--40 inches  
29--44 inches  
1160  
1165  
NOTE: When installing any gate at its maximum width use Wall  
Mounting Cups to ensure stability and safety.  
2
Download from Www.Somanuals.com. All Manuals Search And Download.  
Assembling andInstalling Your Gate  
**Note: IMPORTANT!! You will notice a slight gap between the gate door latch and the  
frame. THIS IS NOT A DEFECT. Your gate is a pressure mounted gate and this gap will  
disappear once you tighten your gate in its opening.  
Step 1.  
Locate the 4 threaded spindle rods. Rotate the adjustment wheels along the threading,  
eliminating the gap between the adjustment wheel and the rubber foot.  
Threaded Spindle Rod  
Diagram A  
Adjustment Wheel  
Rubber Foot  
Step 2.  
Insert the 4 threaded spindle rods into the holes at each of the 4 corners of the gate as  
shown in the Diagram  
Diagram B  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
Step 3.  
Position the gate so that it is level and centered within your doorway or opening.  
Rotate the adjustment wheels on the threaded spindle rods in the opposite direction  
at in Step 1, expanding the gap between the rubber foot and the adjustment wheel.  
Expand each of the 4 Threaded Spindle Rods until they make contact with the  
doorway or opening. Do not fully tighten the Threaded Spindle Rods yet.  
Diagram C1  
Diagram C2  
It may be necessary to hold the Threaded Spindle Rods or Rubber  
Feet while rotating the Adjustment Wheels to ensure the entire  
unit does not rotate.  
HINT:  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
Step4.  
When you are satisfied with the general placement of your gate, fully tighten  
the Threaded Spindle Rods attached to the lower corners of the gate by  
further rotating the Adjustment Wheels.  
Continue by tightening the upper Threaded Spindle Rods. As you tighten the  
upper Threaded Spindle Rods, you will notice the gap between the Door  
Frame and the Easy Open Latch begin to narrow.  
In order for the gate to function properly, stop tightening the upper  
Threaded Spindle Rods just before the inner wall of the Locking Latch and  
the Gate Frame touch.  
Easy Open Latch  
Locking Latch  
Gate Frame  
Diagram D  
There should be equal spacing among each of the 4 Threaded  
Spindle Rods. Make the appropriate adjustment to ensure you  
have installed your gate safely.  
NOTE:  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
Positioning and Attaching the Wall Cups  
Your gate is a pressure mounted gate. Therefore, it is not necessary to use the screw  
attached Wall Cups in your door opening if you choose not to. However, IF YOUARE  
USING THE GATE AT THE TOP OF STAIRS YOU MUST USE THE WALL CUPS. Using the  
Wall Cups will affix your gate more firmly in the doorway or opening.  
Step1.  
After you have mounted your gate, and you are satisfied with its positioning, use a  
pencil or other marking tool to draw a circle on the surface of your doorway or  
opening around the perimeter of the 4 rubber feet.  
Diagram E  
Step2.  
Next, completely remove the gate from the opening by loosening each of the 4  
Threaded Spindle Rods and de-pressurizing the gate.  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
Step3.  
With the gate fully removed, you can now use the circles you marked during Step 1  
as guides for screwing in your 4 Wall Cups.  
Center each of the Wall Cups within the guide circles and use the provided  
self-tapping screws to fasten them in place via the hole through the center of each  
Wall Cup.  
Diagram F  
Step4.  
Reinstall your gate in the doorway or opening according to the instructions, using  
the newly installed Wall Cups as anchoring points for the 4 Threaded Spindle Rods  
Diagram G  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operating the Door Latch  
Step1.  
Pull the Spring Lock away from the Easy Open Latch while simultaneously  
lifting the Lock Lever upwards. This will release the Locking Latch from the  
Gate Frame and allow the door to push or pull open.  
Spring Lock  
Lock Lever  
Diagram H  
Step2.  
To lock the door shut, close the door completely, then push down on the  
Lock Lever to re-engage the Spring Lock  
If your Easy Open Latch is not properly engaging with the  
receiving component, ensure that your gate is level, mounted  
HINT:  
properly, and that you have not over-tightened the threaded  
Spindle Rods.  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
Adding a Gate Extension  
Step 1. Assemble the gate per the gate instructions.  
Step 2. Choose the side of the gate to be extended and remove the top  
and bottom Threaded Spindle Rods.  
Step 3. Assemble the gate and extension as illustrated.  
Step 4. Reposition the gate and fit in accordance with the gate fitting  
instructions.  
Removing Your Gate From The Wall  
To remove your gate from the wall, rotate the Adjustment Wheels on  
each of the 4 Threaded Spindle Rods to depressurize the gate from its  
doorway or opening. Then, gently pull or push the gate free from its  
doorway or opening.  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
Care And Maintenance  
Periodically check the gate for signs of damage, wear, or missing  
components.  
Do not use if any part is missing, worn or damaged.  
Check the gate regularly to ensure all the hardware and mountings are  
tightened.  
Do not use abrasive cleaners or bleach.  
Clean by sponging with warm water and a mild detergent.  
90 Days Limited Warranty:  
If, during the first 90 days after consumer purchase of the item, under  
reasonable and non-commercial use and conditions of maintenance, it  
fails while owned by the original purchaser because of the quality of  
materials or workmanship of finish and assembly, Regalo International  
LLC will replace or repair it at Regalo’s option. PROOF OF PURCHASE  
REQUIRED.  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Replacement Parts Available  
In the event of any damage or breakage, the following replacement parts  
are available for order by contacting Regalo Customer Service.  
Wall Cups  
(#14015)  
1” Wall Mount Screws  
Threaded Spindle Rods  
with Adjustment Wheel  
(#14016)  
(#10001)  
Bottom Plug Insert  
(#14019)  
Easy Open Latch  
(#13037)  
Top Plug Insert  
(#14020)  
Contact Regalo for questions and replacement parts.  
For questions about the use of your gate, call our customer care line 866-272-5274.  
Regalo International, LLC.  
3200 Corporate Center Drive, Suite 100  
Burnsville, MN 55306-9803, USA  
Made in China  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Regalo International, LLC.  
3200 Corporate Center Drive, Suite 100  
Burnsville, MN 55306-9803, USA  
Toll Free: 866-272-5274  
Made in China  
11/25/2013_BL  
Download from Www.Somanuals.com. All Manuals Search And Download.  

PYLE Audio Turntable PNGTT1 User Guide
Radio Shack Cordless Telephone 43 3814 User Guide
Radio Shack Cordless Telephone Digital Answering System with Caller ID Deluxe and 24 GHz Digital Spread Spectrum Cordless Phone User Guide
RCA Satellite TV System 32F650T User Guide
Renesas Computer Hardware H8 3802 User Guide
Rinnai Water Heater R63LSE2 User Guide
Rotel Stereo System RSP 1098 User Guide
Samson Headphones BT30 User Guide
Sealife Digital Camera DC 600 User Guide
Sears Refrigerator 302124 User Guide