Model No. RBBE0787.2
Serial No.
Write the serial number in the
space above for future reference.
Serial Number Decal (under seat)
USER’S MANUAL
QUESTIONS?
As a manufacturer, we are com-
mitted to providing complete cus-
tomer satisfaction. If you have
questions, or if parts are missing,
PLEASE DO NOT CONTACT THE
STORE; please contact
Customer Care.
IMPORTANT: You must note the
product model number and
serial number (see the drawing
above) before contacting us:
CALL TOLL-FREE:
1-877-994-4999
Mon.–Fri. 6 a.m.–6 p.m. MST
Sat. 8 a.m.–4 p.m. MST
ON THE WEB:
CAUTION
Visit our website at
Read all precautions and instruc-
tions in this manual before using
this equipment. Save this manual
for future reference.
new products, prizes,
fitness tips, and much more!
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT PRECAUTIONS
WARNING:
To reduce the risk of serious injury, read all important precautions and
instructions in this manual and all warnings on the weight bench before using the weight bench.
ICON assumes no responsibility for personal injury or property damage sustained by or through
the use of this product.
1. Before beginning any exercise program, con- 6. Inspect and properly tighten all parts regu-
sult your physician. This is especially impor-
tant for persons over the age of 35 or per-
sons with pre-existing health problems.
larly. Replace any worn parts immediately.
7. Keep children under age 12 and pets away
from the weight bench at all times.
2. Use the weight bench only as described in
this manual.
8. Keep hands and feet away from moving parts.
3. It is the responsibility of the owner to ensure
that all users of the weight bench are ade-
quately informed of all precautions.
9. Wear appropriate clothes while exercising.
Always wear athletic shoes for foot protec-
tion while exercising.
4. The weight bench is intended for home use
only. Do not use the weight bench in any
commercial, rental, or institutional setting.
10. The weight bench is designed to support a
maximum user weight of 300 lbs. (133 kg),
and a maximum total weight of 410 lbs. (186
kg).
5. Keep the weight bench indoors, away from
moisture and dust. Place the weight bench
on a level surface, with a mat beneath it to
protect the floor or carpet. Make sure that
there is enough clearance around the weight
bench to mount, dismount, and use it.
11. If you feel pain or dizziness while exercising,
stop immediately and cool down.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
BEFORE YOU BEGIN
Thank you for selecting the versatile REEBOK® TONE
TRAINER weight bench. The weight bench is designed
to help develop the major muscle groups of the upper
body. Whether your goal is to tone your body, build dra-
matic muscle size and strength, or improve your cardio-
vascular system, the weight bench will help you to
achieve the specific results you want.
number and serial number before contacting us. The
model number and the location of the serial number
decal are shown on the front cover of this manual.
To avoid a registration fee for any service needed
under warranty, you must register the weight
For your benefit, read this manual carefully before
using the weight bench. If you have questions after
reading this manual, please see the front cover of this
manual. To help us assist you, note the product model
Before reading further, please review the drawing
below and familiarize yourself with the parts that are
labeled.
ASSEMBLED DIMENSIONS:
Height: 46 in. (117 cm)
Width: 19 in. (48 cm)
Depth: 47 in. (119 cm)
Backrest
Seat
Rear Stabilizer
Seat Pin
Front Stabilizer
4
Download from Www.Somanuals.com. All Manuals Search And Download.
PART IDENTIFICATION CHART
See the drawings below to identify small parts used in assembly. The number in parentheses by each drawing is
the key number of the part, from the PART LIST near the end of this manual. Important: Some small parts
may have been preattached. If a part is not in the hardware kit, check to see if it has been preattached.
M4 x 15mm
Screw (20)
M6 Washer (26)
M10 Nylon Locknut (13)
M10 Washer (14)
M6 x 45mm Button Screw (17)
M10 x 75mm Button Bolt (16)
M10 x 90mm Carriage Bolt (15)
M10 x 50mm Button Bolt (18)
5
Download from Www.Somanuals.com. All Manuals Search And Download.
ASSEMBLY
• For help identifying small parts, use the PART
IDENTIFICATION CHART on page 5.
Make Things Easier for Yourself
Everything in this manual is designed to ensure
that the weight bench can be assembled suc-
cessfully by almost anyone. By setting aside
plenty of time, assembly will go smoothly.
• As you assemble the weight bench, make sure all
parts are oriented as shown in the drawings.
• Tighten all parts as you assemble them, unless
instructed to do otherwise.
Before beginning assembly, carefully read the fol-
lowing information and instructions:
• Assembly requires the included hex key(s)
and the following tools (not included):
• To hire an authorized service technician to
assemble the weight bench, call 1-800-445-2480.
two adjustable wrenches
one standard screwdriver
one Phillips screwdriver
• Assembly requires two persons.
• Because of its size, the weight bench should be
assembled in the location where it will be used.
Make sure that there is enough clearance to walk
around the weight bench as you assemble it.
Assembly may be more convenient if you have a
socket set, a set of open-end or closed-end
wrenches, or a set of ratchet wrenches.
• Place all parts in a cleared area and remove the
packing materials. Do not dispose of the packing
materials until assembly is completed.
1.
1
Before beginning assembly, make sure that
you have read and understand the informa-
tion in the box above.
16
Orient the Bench Frame (1) as shown. Insert two
M10 x 75mm Button Bolts (16) through the indi-
cated holes in the Frame Bracket (10). Next,
insert two M10 x 75mm Button Bolts through the
indicated holes in the Bench Frame. Place a piece
of tape over each Button Bolt to hold it in place.
16
10
1
6
Download from Www.Somanuals.com. All Manuals Search And Download.
2. Orient the Bench Frame (1) as shown. Orient the
Front Stabilizer (2) with the square holes in the
location shown.
2
1
13
Press two Stabilizer Caps (9) onto the Front
Stabilizer (2). Attach the Front Stabilizer to the
Bench Frame (1) with two M10 x 90mm Carriage
Bolts (15) and two M10 Nylon Locknuts (13). Do
not tighten the Nylon Locknuts yet.
2
9
13
Square Hole
15
Square Hole
9
3. Orient the Rear Stabilizer (3) with the warning
decal on the indicated side. Press two Stabilizer
Caps (9) onto the Rear Stabilizer.
3
3
15
9
Attach the Rear Stabilizer (3) to the Bench Frame
(1) with two M10 x 90mm Carriage Bolts (15) and
two M10 Nylon Locknuts (13). Do not tighten the
Nylon Locknuts yet.
13
1
Warning
Decal
13
Make sure the Bench Frame (1) and the Front
and Rear Stabilizers (2, 3) are level with the floor.
9
See steps 2 and 3. Tighten the M10 Nylon
Locknuts (13) used in step 2 and 3.
4. Attach the Seat Frame (4) to the Bench Frame
(1) with the four indicated M10 x 75mm Button
Bolts (16) and four M10 Nylon Locknuts (13).
Note: It will be necessary to tip the weight
bench on its side to tighten the Nylon
Locknuts.
4
13
4
16
1
7
Download from Www.Somanuals.com. All Manuals Search And Download.
5. Attach the Adjustment Arm (6) to the Backrest
Frame (5) with four M10 x 50mm Button Bolts
(18), four M10 Washers (14), and four M10 Nylon
Locknuts (13). Do not overtighten the Nylon
Locknuts.
5
5
14
18
14
13
14
13
6
14
18
6. Attach the Backrest (7) to the Backrest Frame (5)
with four M6 x 45mm Button Screws (17) and four
M6 Washers (26).
6
7
26
17
26
5
26
17
26
8
Download from Www.Somanuals.com. All Manuals Search And Download.
7. Apply a small amount of the included grease to
an M10 x 200mm Button Bolt (19). While pulling
the Seat Pin (12), insert the Adjustment Arm (6)
into the Seat Frame (4). Then, release the Seat
Pin.
7
Attach the Backrest Frame (5) to the Seat Frame
with the M10 x 200mm Button Bolt (19) and an
M10 Nylon Locknut (13).
13
6
5
4
19
Apply
Grease
12
8. Attach the Seat (8) to the Seat Frame (4) with
four M6 x 45mm Button Screws (17) and four M6
Washers (26).
8
8
4
26
17
26
17
9. Make sure that all parts are properly tightened
before using the weight bench.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
ADJUSTMENT
This section explains how to adjust the weight bench. See the EXERCISE GUIDELINES on page 11 for impor-
tant information about how to get the most benefit from your exercise program. Also, refer to the accompanying
exercise guide to see the correct form for each exercise.
Make sure all parts are properly tightened each time the weight bench is used. Replace any worn parts immedi-
ately. The weight bench can be cleaned with a damp cloth and a mild, non-abrasive detergent; do not use sol-
vents to clean the weight bench.
ADJUSTING THE BACKREST
The Backrest (7) can be used in several positions. To
move the Backrest, pull the Seat Pin (12), move the
Backrest to the desired position, and then release the
Seat Pin. Make sure the Seat Pin is inserted
through a hole on the Adjustment Arm (6).
7
6
12
10
Download from Www.Somanuals.com. All Manuals Search And Download.
EXERCISE GUIDELINES
THE FOUR BASIC TYPES OF WORKOUTS
PERSONALIZING YOUR EXERCISE PROGRAM
Muscle Building
To increase the size and strength of your muscles,
Determining the appropriate length of time for each
workout, and the numbers of repetitions and sets to
push them close to their maximum capacity. Your mus- complete, is an individual matter. Avoid overdoing it
cles will continually adapt and grow as you progres-
sively increase the intensity of your exercise. You can
adjust the intensity level of an individual exercise in
two ways:
• by changing the amount of resistance used
• by changing the number of repetitions or sets per-
formed. (A “repetition” is one complete cycle of an
exercise, such as one sit-up. A “set” is a series of
repetitions.)
during the first few months of your exercise program.
Progress at your own pace and be sensitive to your
body’s signals. If you experience pain or dizziness
while exercising, stop immediately and cool down.
Find out what is wrong before continuing. Remember
that adequate rest and a proper diet are important fac-
tors in any exercise program.
WARMING UP
The proper amount of resistance for each exercise
depends upon the individual user. You must gauge
your limits and select the amount of resistance that is
Begin each workout with 5 to 10 minutes of stretching
and light exercise to warm up. Warming up prepares
your body for more strenuous exercise by increasing
right for you. Begin with 3 sets of 8 repetitions for each circulation, raising your body temperature and deliver-
exercise you perform. Rest for 3 minutes after each
set. When you can complete 3 sets of 12 repetitions
without difficulty, increase the amount of resistance.
ing more oxygen to your muscles.
WORKING OUT
Toning
Each workout should include 6 to 10 different exer-
You can tone your muscles by pushing them to a mod- cises. Select exercises for every major muscle group,
erate percentage of their capacity. Select a moderate
amount of resistance and increase the number of rep-
etitions in each set. Complete as many sets of 15 to
20 repetitions as possible without discomfort. Rest for
1 minute after each set. Work your muscles by com-
emphasizing areas that you want to develop most. To
give balance and variety to your workouts, vary the
exercises from workout to workout.
Schedule your workouts for the time of day when your
pleting more sets rather than by using high amounts of energy level is the highest. Each workout should be
resistance.
followed by at least one day of rest. Once you find the
schedule that is right for you, stick with it.
Weight Loss
To lose weight, use a low amount of resistance and
increase the number of repetitions in each set.
Exercise for 20 to 30 minutes, resting for a maximum
of 30 seconds between sets.
EXERCISE FORM
Maintaining proper form is an essential part of an
effective exercise program. This requires moving
through the full range of motion for each exercise, and
moving only the appropriate parts of the body.
Cross Training
Cross training is an efficient way to get a complete and Exercising in an uncontrolled manner will leave you
well-balanced fitness program. An example of a bal-
anced program follows:
• Plan strength training workouts on Monday,
Wednesday, and Friday.
• Plan 20 to 30 minutes of aerobic exercise, such as
running on a treadmill or riding on an elliptical exer-
ciser or exercise cycle, on Tuesday and Thursday.
feeling exhausted. On the exercise guide accompany-
ing this manual you will find photographs showing the
correct form for several exercises, and a list of the
muscles affected. See the muscle chart on the next
page to find the names of the muscles.
Perform the repetitions in each set smoothly and with-
• Rest from both strength training and aerobic exercise out pausing. The exertion stage of each repetition
for at least one full day each week to give your body
time to regenerate.
should last about half as long as the return stage.
Proper breathing is important; exhale during the exer-
tion stage of each repetition and inhale during the
return stroke. Never hold your breath.
The combination of strength training and aerobic exer-
cise will reshape and strengthen your body, plus
develop your heart and lungs.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Rest for a short period of time after each set as fol-
lows:
• Rest for three minutes after each set for a muscle-
building workout.
slowly as you stretch and do not bounce. Ease into
each stretch gradually and go only as far as you can
without strain. Stretching at the end of each workout
is an effective way to increase flexibility.
• Rest for one minute after each set for a toning work-
out.
STAYING MOTIVATED
• Rest for 30 seconds after each set for a weight loss
workout.
Plan to spend the first couple of weeks familiarizing
yourself with the equipment and learning the proper
form for each exercise.
For motivation, keep a record of each workout. List the
date, the exercises performed, the resistance used,
and the numbers of sets and repetitions completed.
Record your weight and key body measurements at
the end of every month. Remember, the key to achiev-
ing the greatest results is to make exercise a regular
and enjoyable part of your everyday life.
COOLING DOWN
End each workout with 5 to 10 minutes of stretching.
Include stretches for both your arms and legs. Move
MUSCLE CHART
O
A. Sternomastoid (neck)
A
B. Pectoralis Major (chest)
C. Biceps (front of arm)
D. Obliques (waist)
P
L
Q
B
E. Brachioradials (forearm)
F. Hip Flexors (upper thigh)
G. Abductor (outer thigh)
H. Quadriceps (front of thigh)
I. Sartorius (front of thigh)
J. Tibialis Anterior (front of calf)
K. Soleus (front of calf)
R
S
C
D
E
T
F
M
N
U
L. Anterior Deltoid (shoulder)
M. Rectus Abdominus (stomach)
N. Adductor (inner thigh)
G
H
I
V
O. Trapezius (upper back)
P. Rhomboideus (upper back)
Q. Posterior Deltoid (shoulder)
R. Triceps (back of arm)
S. Latissimus Dorsi (mid back)
T. Spinae Erectors (lower back)
U. Gluteus Medius (hip)
W
X
J
K
V. Gluteus Maximus (buttocks)
W. Hamstring (back of leg)
X. Gastrocnemius (back of calf)
12
Download from Www.Somanuals.com. All Manuals Search And Download.
EXERCISE
WEIGHT
WEIGHT
WEIGHT
SETS
SETS
SETS
REPS
REPS
REPS
MONDAY
Date:
/
/
AEROBIC EXERCISE
EXERCISE
TUESDAY
Date:
/
/
WEDNESDAY
Date:
/
/
AEROBIC EXERCISE
EXERCISE
THURSDAY
Date:
/
/
FRIDAY
Date:
/
/
Make photocopies of this page for scheduling and recording your workouts.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
PART LIST—Model No. RBBE0787.2
R1207A
Key No. Qty.
Description
Key No. Qty.
Description
1
2
3
4
5
6
7
8
9
10
11
12
13
1
1
1
1
1
1
1
1
4
1
2
1
13
Bench Frame
Front Stabilizer
Rear Stabilizer
Seat Frame
Backrest Frame
Adjustment Arm
Backrest
14
15
16
17
18
19
20
21
*
4
4
4
8
4
1
4
8
–
–
–
–
M10 Washer
M10 x 90mm Carriage Bolt
M10 x 75mm Button Bolt
M6 x 45mm Button Screw
M10 x 50mm Button Bolt
M10 x 200mm Button Bolt
M4 x 15mm Screw
M6 Washer
User’s Manual
Exercise Guide
Hex Key
Grease Packet
Seat
Stabilizer Cap
Frame Bracket
Bushing
Seat Pin
M10 Nylon Locknut
*
*
*
Note: Specifications are subject to change without notice. See the back cover of this manual for information
about ordering replacement parts. *These parts are not illustrated.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
EXPLODED DRAWING—Model No. RBBE0787.2
R1207A
7
17
26
18
14
18
13
5
14
13
13
8
6
17
21
19
15
11
9
11
4
13
26
3
9
13
17
13
17
13
1
12
2
9
10
20
20
9
15
16
15
Download from Www.Somanuals.com. All Manuals Search And Download.
ORDERING REPLACEMENT PARTS
To order replacement parts, please see the front cover of this manual. To help us assist you, be prepared to pro-
vide the following information when contacting us:
• the model number and serial number of the product (see the front cover of the manual)
• the name of the product (see the front cover of this manual)
• the key number and description of the part(s) (see the PART LIST and the EXPLODED DRAWING near the
end of this manual)
LIMITED WARRANTY
ICON Health & Fitness, Inc. (ICON) warrants this product to be free from defects in workmanship and
material, under normal use and service conditions, for a period of ninety (90) days from the date of pur-
chase. This warranty extends only to the original purchaser. ICON's obligation under this warranty is lim-
ited to replacing or repairing, at ICON's option, the product through one of its authorized service centers.
All repairs for which warranty claims are made must be pre-authorized by ICON. If the product is shipped
to a service center, freight charges to and from the service center will be the customer’s responsibility. For
in-home service, the customer will be responsible for a minimal trip charge. This warranty does not extend
to any product or damage to a product caused by or attributable to freight damage, abuse, misuse,
improper or abnormal usage or repairs not provided by an ICON authorized service center; products used
for commercial or rental purposes; or products used as store display models. No other warranty beyond
that specifically set forth above is authorized by ICON.
ICON is not responsible or liable for indirect, special or consequential damages arising out of or in con-
nection with the use or performance of the product or damages with respect to any economic loss, loss
of property, loss of revenues or profits, loss of enjoyment or use, costs of removal or installation or other
consequential damages of whatsoever nature. Some states do not allow the exclusion or limitation of inci-
dental or consequential damages. Accordingly, the above limitation may not apply to you.
The warranty extended hereunder is in lieu of any and all other warranties and any implied warranties of
merchantability or fitness for a particular purpose is limited in its scope and duration to the terms set forth
herein. Some states do not allow limitations on how long an implied warranty lasts. Accordingly, the above
limitation may not apply to you.
This warranty gives you specific legal rights. You may also have other rights which vary from state to state.
ICON HEALTH & FITNESS, INC., 1500 S. 1000 W., LOGAN, UT 84321-9813
Part No. 263072 R1207A
Printed in USA © 2007 ICON IP, Inc.
Download from Www.Somanuals.com. All Manuals Search And Download.
|