Model No. 30711.0
Serial No.
USER'S MANUAL
Serial Number
Decal
QUESTIONS?
As a manufacturer, we are com-
mitted to providing complete
customer satisfaction. If you
have questions, or if parts are
damaged or missing, PLEASE
DO NOT CONTACT THE STORE.
For assistance, contact our
Customer Service Department.
CALL TOLL-FREE:
1-888-936-4266
Mon.–Fri., 8:00 until 17:00 EST
(excluding holidays)
OR E-MAIL US:
CAUTION
Read all precautions and instruc-
tions in this manual before using
this equipment. Keep this manual
for future reference.
Visit our website at
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT PRECAUTIONS
WARNING:
To reduce the risk of serious injury, read all important precautions and
instructions in this manual and all warnings on your exercise cycle before using your exercise
cycle. ICON assumes no responsibility for personal injury or property damage sustained by or
through the use of this product.
1. Before beginning any exercise program,
consult your physician. This is especially
important for persons over the age of 35 or
persons with pre-existing health problems.
8. Wear appropriate exercise clothes when
exercising; do not wear loose clothes that
could become caught on your exercise
cycle. Always wear athletic shoes for foot
protection.
2. It is the responsibility of the owner to ensure
that all users of the exercise cycle are ade-
quately informed of all precautions.
9. Keep your back straight while using your
exercise cycle; do not arch your back.
3. Your exercise cycle is intended for home use 10. The pulse sensor is not a medical device.
only. Do not use your exercise cycle in a
commercial, rental, or institutional setting.
Various factors, including the user’s move-
ment, may affect the accuracy of heart rate
readings. The pulse sensor is intended only
as an exercise aid in determining heart rate
trends in general.
4. Keep your exercise cycle indoors, away from
moisture and dust. Place your exercise cycle
on a level surface, with a mat beneath it to
protect the floor or carpet. Make sure that
there is enough clearance around your exer-
cise cycle to mount, dismount, and use it.
11. When you stop exercising, allow the pedals
to slowly come to a stop.
12. If you feel pain or dizziness while exercising,
stop immediately and cool down.
5. Inspect and properly tighten all parts regu-
larly. Replace any worn parts immediately.
13. Use your exercise cycle only as described in
this manual.
6. Keep children under age 12 and pets away
from your exercise cycle at all times.
7. Your exercise cycle should not be used by
persons weighing more than 250 lbs.
(113 kg).
3
Download from Www.Somanuals.com. All Manuals Search And Download.
BEFORE YOU BEGIN
®
Congratulations for selecting the new REEBOK RB
310 exercise cycle. Cycling is one of the most effec-
tive exercises for increasing cardiovascular fitness,
building endurance, and toning the entire body. The
RB 310 exercise cycle offers an impressive array of
features to let you enjoy this healthful exercise in the
convenience and privacy of your home.
after reading this manual, please see the front cover
of this manual. To help us assist you, note the product
model number and serial number before contacting
us. The model number and the location of the serial
number decal are shown on the front cover of this
manual.
Before reading further, please familiarize yourself with
the parts that are labeled in the drawing below.
For your benefit, read this manual carefully before
you use the exercise cycle. If you have questions
Pulse Sensor
Console
Upright Knob
Water Bottle Holder*
Backrest
Seat
Pedal/Strap
Wheel
Leveling Foot
Game Controller
Handlebar
Handle
*No water bottle is included
4
Download from Www.Somanuals.com. All Manuals Search And Download.
ASSEMBLY
Assembly requires two persons. Place all parts of the exercise cycle in a cleared area and remove the packing
materials. Do not dispose of the packing materials until assembly is completed.
Assembly requires the included tools and your own adjustable wrench
screwdriver
and Phillips
.
Use the part drawings below to identify the small parts used in assembly. The number in parentheses below
each drawing is the key number of the part, from the PART LIST near the end of this manual. The number fol-
lowing the parentheses is the quantity needed for assembly. Note: Some small parts may have been preat-
tached. If a part is not in the parts bag, check to see if it has been preattached.
M4 x 16mm
M6 Washer
(44)–7
M8 Split
Round Head
Screw (80)–4
M8 x 16mm Button
Screw (54)–6
M8 x 19mm Button
Screw (77)–4
Washer (55)–14
M6 x 42mm Button
Screw (81)–4
M6 x 38mm Button
Screw (72)–3
M8 x 50mm Button
Screw (52)–4
M10 x 63mm Bolt Set (62)–1
1. Orient the Left Front Stabilizer (15) with the Wheel (17)
positioned as shown. Attach the Left Front Stabilizer to
the left side of the Frame (1) with three M8 x 16mm
Button Screws (54) and three M8 Split Washers (55).
1
15
17
Attach the Right Front Stabilizer (not shown) to the
right side of the Frame (1) in the same way.
1
55
54
55
54
5
Download from Www.Somanuals.com. All Manuals Search And Download.
2. While another person lifts the rear of the Frame (1),
attach the Rear Stabilizer (16) to the Frame with four
M8 x 50mm Button Screws (52) and four M8 Split
Washers (55).
2
1
16
55
52
55
52
3. Tighten the Upright Knob (7) into the Frame (1).
3
7
1
4. While another person holds the Upright (2) near the
Frame (1), use the wire tie in the Upright to pull the
Upper and Main Wire Harnesses (42, 43) through the
Upright. See the inset drawing. Tie the wire tie to the
ends of the Wire Harnesses. Then, pull the other end
of the wire tie upward out of the top of the Upright.
4
42
43
Avoid pinching
and damaging
the wires.
2
Attach the Upright (2) to the Frame (1) with an
M10 x 63mm Bolt Set (62). Be careful to avoid pinch-
ing the Wire Harnesses (42, 43).
Wire Tie
42, 43
62
1
62
6
Download from Www.Somanuals.com. All Manuals Search And Download.
5. The Console (4) requires four “D” batteries (not includ-
ed); alkaline batteries are recommended. IMPOR-
TANT: If the exercise cycle has been exposed to
cold temperatures, allow it to warm to room tem-
perature before inserting batteries into the
5
Batteries
Batteries
Console. If you do not do this, the console dis-
plays or other electronic components may become
damaged. Remove the battery cover from the back of
the Console. Next, insert four batteries into the battery
compartment; make sure that the batteries are ori-
ented as shown by the diagram inside the battery
compartment. Then, reattach the battery cover.
4
Battery
Cover
6. While another person holds the Console (4) near the
Upright (2), connect the console wire harnesses to the
Upper and Main Wire Harnesses (42, 43). Insert the
excess wire downward into the Upright.
6
4
Avoid pinching and
damaging the wires.
42
Attach the Console (4) to the Upright (2) with four
M4 x 16mm Round Head Screws (80). Be careful to
avoid pinching the Wire Harnesses (42, 43).
80
80
43
2
Console
Wire
Harnesses
7. Attach the Seat (9) and the Backrest Bracket (3) to the
Seat Bracket (11) with four M6 x 42mm Button
Screws (81) and four M6 Washers (44) as shown.
Start all four Button Screws before you tighten any
of them.
7
9
11
3
44
44
81
81
7
Download from Www.Somanuals.com. All Manuals Search And Download.
8. Attach the Backrest (8) to the Backrest Bracket (3)
with three M6 x 38mm Button Screws (72) and three
M6 Washers (44). Start all three Button Screws
before you tighten any of them.
8
8
3
44
72
72
44
44
9. Push the seat handle down. Pull the Seat Carriage
(41) towards the back of the exercise cycle until it
stops. Then, pull up on the seat handle to lock the Seat
Carriage in place.
9
Avoid pinching and
damaging the wires.
While another person holds the Seat Bracket (11) near
the Seat Carriage (41), connect the Right Controller
Wire (82), which has a tag attached, to the wire on the
Rear Wire Harness (51) that has a tag attached. Then,
connect the Left Controller Wire (61) to the other wire
on the Rear Wire Harness. Make sure that the con-
nectors on the Controller Wires (61, 82) are posi-
tioned side by side under the plastic cover on the
Seat Bracket.
77
55
Plastic
Cover
61
11
82
41
Seat
55
77
Be careful to avoid pinching and damaging the
wires. Attach the Seat Bracket (11) to the Seat
Carriage (41) with four M8 x 19mm Button Screws (77)
and four M8 Split Washers (55).
Handle
51
8
Download from Www.Somanuals.com. All Manuals Search And Download.
10. Identify the Left Pedal (22), which is marked with an
“L.” Using an adjustable wrench, firmly tighten the
Left Pedal counterclockwise into the Left Crank
Arm (24). Tighten the Right Pedal (not shown) clock-
wise into the Right Crank Arm (not shown). Important:
Tighten both Pedals as firmly as possible. After
using the exercise cycle for one week, retighten
the Pedals.
10
25
22
Adjust the Left Pedal Strap (25) to the desired posi-
tion, and press the end of the Left Pedal Strap onto
the tab on the Left Pedal (22). Adjust the Right
Pedal Strap (not shown) in the same way.
24
11. Make sure that all parts are properly tightened before you use the exercise cycle. Note: After assembly is
completed, some extra parts may be left over. Place a mat beneath the exercise cycle to protect the floor.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
EXERCISE CYCLE OPERATION
HOW TO ADJUST THE PEDAL STRAPS
HOW TO ADJUST THE UPRIGHT
To adjust the pedal
straps, first pull the
ends of the straps
off the tabs on the
pedals. Adjust the
The upright can be
adjusted to the posi-
tion that is the most
comfortable for you.
To adjust the
Upright
Pedal
Strap
straps to the
upright, first raise
the upright so that it
desired position,
and then press the
ends of the straps
back onto the tabs.
Upright
Knob
is not resting on the
upright knob. Next,
turn the upright
Tab
knob clockwise or
counterclockwise to
raise or lower the
upright. Then, rest
the upright on the upright knob.
HOW TO ADJUST THE SEAT
The seat can be
adjusted forward or
backward to the
position that is the
most comfortable
for you. To adjust
the seat, push
Seat
down on the seat
handle, slide the
seat to the desired
position, and then
pull up on the han-
dle to lock the seat
in place.
Handle
10
Download from Www.Somanuals.com. All Manuals Search And Download.
CONSOLE DIAGRAM
FEATURES OF THE CONSOLE
Interactive Games
The console also features four motivational interactive
games. Using the dual game controllers, play the chal-
lenging Fat Blocker™ game or the fast-paced Calorie
Destroyer™ game during your workouts—the harder
you exercise, the greater your advantage! Or, use your
wits and the interactive touch screen to win credits
while playing the classic card game of Blackjack or
Texas Hold ‘Em.
The revolutionary console offers an array of features
designed to make your workouts more effective and
enjoyable. When you use the manual mode of the
console, you can change the resistance of the pedals
with the touch of a button. While you exercise, the
console will display continuous exercise feedback. You
can even measure your heart rate using the handgrip
pulse sensor.
To use the manual mode of the console, follow the
steps beginning on page 12. To use a smart program,
see page 13. To play the Fat Blocker game, see
page 15. To play the Calorie Destroyer game, see
page 16. To play the Blackjack game, see page 17.
To play the Texas Hold ‘Em game, see page 18.
Smart Programs
The console offers ten smart programs. Each program
automatically changes the resistance of the pedals
and prompts you to vary your pedaling pace as it
guides you through an effective workout.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
HOW TO USE THE MANUAL MODE
The lower left corner of the display will show the
distance you have pedaled, in miles or kilometers.
Note: If there is a sheet of clear plastic on the face
of the console, remove the plastic.
The upper right corner of the display will show
the approximate number of calories you have
burned. The upper right corner of the display will
also show your heart rate when you use the hand-
grip pulse sensor (see step 5 on page 13).
1. Begin pedaling or press any button on the con-
sole to turn on the console.
A moment after you begin pedaling or press a but-
ton, the display will light.
The lower right corner of the display will show
your pedaling pace in miles or kilometers per hour.
2. Select the manual mode.
The center of the display will show the resistance
setting of the pedals for a few seconds each time
the resistance setting changes.
Each time you turn
on the console, the
manual mode will
be selected. If you
You can also view selected information at a larger
size. Press the Display button repeatedly to view
time and distance information, time and calorie
information, or time and pace information. Press
the Display button again to view all information.
have selected a
program, reselect
the manual mode
by pressing the Program button repeatedly until the
words MANUAL MODE appear in the lower left cor-
ner of the display.
The console has three backlight options. The “On”
option keeps the backlight on while the console is
on. To conserve the batteries, the “Auto” option
keeps the backlight on only while you are pedal-
ing. The “Off” option turns the backlight off. To
select a backlight option, first press and hold down
the Program button for several seconds. Next,
press the increase button to select the desired
backlight option. Then, press the Program button to
save your selection.
3. Change the resistance of the pedals as desired.
As you pedal,
change the resis-
tance of the pedals
by pressing the
increase and
decrease buttons
repeatedly. Note: After you press the buttons, it will
take a moment for the pedals to reach the select-
ed resistance level.
The console can show speed and distance in
either miles or kilometers. The letters MPH or
KM/H will appear in the display to show which unit
of measurement is selected. To change the unit of
measurement, first press and hold down the
Program button for several seconds. Next, press
the decrease button to select the desired unit of
measurement. Then, press the Program button to
save your selection.
4. Follow your progress with the display.
The upper left corner of the display will show
the elapsed time. Note: When a program is select-
ed, the display will show the time remaining in the
program instead of the elapsed time.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
5. Measure your heart rate if desired.
HOW TO USE A SMART PROGRAM
If there are sheets of clear plastic on the metal
contacts on the handgrip pulse sensor, remove
the plastic. To measure your heart rate, hold the
handgrip pulse sensor with your palms resting
against the metal contacts. Avoid moving your
hands or gripping the contacts too tightly.
1. Begin pedaling or press any button on the con-
sole to turn on the console.
A moment after you begin pedaling or press a but-
ton, the display will light.
2. Select a smart program.
When your pulse is
detected, one, two,
or three dashes will
appear in the dis-
play, and then your
heart rate will be
shown. For the
To select one of the
Contacts
Profile
ten smart pro-
grams, press the
Program button
repeatedly until
PROGRAM 1, 2, 3,
4, 5, 6, 7, 8, 9, or
10 appears in the
most accurate heart
rate reading, hold
the contacts for at
least 15 seconds.
display. The program time and a profile of the
resistance settings for the program will also appear
in the display.
Note: If you continue to hold the handgrip pulse
sensor, the display will show your heart rate for up
to 30 seconds.
3. Begin pedaling to start the program.
Each program is divided into either 20, 30, or 45
one-minute segments. One resistance setting and
one target pace setting are programmed for each
segment. Note: The same resistance setting and/or
target pace setting may be programmed for two or
more consecutive segments.
If the display does not show your heart rate, make
sure that your hands are positioned as described.
Be careful not to move your hands excessively or
to squeeze the metal contacts too tightly. For opti-
mal performance, clean the metal contacts using a
soft cloth; never use alcohol, abrasives, or
chemicals to clean the contacts.
The resistance setting and the target pace setting
for the first segment will appear in the center of the
display for a few seconds. The resistance setting
will then be indicated by the height of the flashing
column of the profile in the display. The resistance
settings for the next several segments will be indi-
cated by the heights of the columns to the right of
the flashing column.
6. When you are finished exercising, the console
will turn off automatically.
If the pedals do not move for several seconds, a
tone will sound and the console will pause. If the
pedals do not move for several minutes and the
buttons are not pressed, the console will turn off
and the display will be reset.
When the first segment of the program ends, the
resistance setting and the target pace setting for
the second segment will appear in the center of
the display for a few seconds to alert you. The
entire profile will then shift one column to the left,
and the pedals will automatically adjust to the
resistance setting for the second segment.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
As you exercise,
the program ends, the pedals will automatically
adjust to the resistance setting for the next seg-
ment.
you will be prompt-
ed to keep your
pedaling pace near
the target pace set-
The program will continue in this way until the last
segment ends. To stop the program at any time,
stop pedaling. A tone will sound and the time will
begin to flash in the display. To restart the program,
simply resume pedaling.
ting for the current
segment. When an
upward arrow appears in the display, increase
your pace. When a downward arrow appears in
the display, decrease your pace. When no arrows
appear, maintain your current pace.
4. Follow your progress with the display.
See step 4 on page 12.
Important: The target pace settings are intend-
ed only to provide motivation. Your actual pace
may be slower than the target pace settings.
Make sure to exercise at a pace that is com-
fortable for you.
5.
6.
Measure your heart rate if desired.
See step 5 on page 13.
When you are finished exercising, the console
will turn off automatically.
If the resistance setting for the current segment is
too high or too low, you can manually override the
setting by pressing the increase and decrease but-
tons. Important: When the current segment of
See step 6 on page 13.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
HOW TO PLAY THE FAT BLOCKER GAME
Your goal is to
maneuver the
Complete Row
The Fat Blocker game requires quick thinking and fast
reflexes. In addition to the console buttons, you will
use the four-button game controllers on the handlebar
to play the game. Follow the steps below to play the
Fat Blocker game.
blocks so that they
form a complete
row of black
squares across the
entire arena. Each
time you complete a row of black squares, the row
will disappear, and all blocks above will move
downward one row.
1. Begin pedaling or press any button on the con-
sole to turn on the console.
A moment after you begin pedaling or press a but-
ton, the display will light.
As you play, the blocks will fall faster and faster;
however, your pedaling pace will affect the speed
of the blocks—the faster you pedal, the more
slowly the blocks will fall, giving you extra time to
position and orient the blocks. The game will con-
tinue until any part of a stacked block reaches the
top of the arena.
2. Select the Fat Blocker game.
To select the Fat Blocker game, press the Fitness
Games button repeatedly until the words FAT
BLOCKER appear at the top of the display.
When the game ends, the display will show your
final score and the level of play that you reached.
The display will then show the four highest scores
recorded since the scores were reset. If desired,
press and hold down the right button on either
controller to reset the scores. Note: If your score is
one of the four highest, the display will prompt you
to enter a name consisting of three letters or dig-
its. While the line below the first letter is flashing,
press the up and down buttons on either controller
to select the desired letter or digit. Next, press the
right button on either controller and select another
letter or digit. Repeat this process to select a third
letter or digit. Then, press the right button on either
controller again. The display will then show the
four highest scores recorded since the scores
were reset.
3. Pedal to start the game.
When you start the Fat Blocker game, a game
arena will appear in the center of the display.
4. Follow your progress with the display.
While you exercise and play the Fat Blocker game,
the corners of the display will show the elapsed
time, the approximate number of calories you have
burned, and your pedaling pace. In addition, the
display will show your current score and the game
level that you have reached.
A block composed of four or five black squares will
slowly move downward until it reaches the bottom
of the arena. Another block will then move down-
ward. There are blocks of eight different shapes.
As each block falls, you can move it to the left or
right using the left and right buttons on the left
controller. In addition, you can rotate the block
counterclockwise or clockwise using the left and
right buttons on the right controller. Once you have
positioned and oriented a block, you can speed its
motion to the bottom of the arena, if desired, by
pressing the down button on either controller.
To pause the game, press the Display button. To
resume the game, press the Display button repeat-
edly until the words FAT BLOCKER appear at the
top of the display, and then begin pedaling.
5. When you are finished exercising, the console
will turn off automatically.
See step 6 on page 13.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
HOW TO PLAY THE CALORIE DESTROYER GAME
Between the drones and the laser blaster are five
shields. You can hide the laser blaster below a
shield if desired. However, each time a shield is hit
by a laser, a piece will be vaporized.
The Calorie Destroyer game is a fast-paced game that
pits you against a squadron of laser-firing drones. In
addition to the console buttons, you will use the four-
button game controllers on the handlebar to play the
game. Follow the steps below to play the Calorie
Destroyer game.
Your goal is to keep the laser blaster from being
hit and to keep any drone from reaching the bot-
tom of the arena. If the laser blaster is hit, it will be
disabled and another laser blaster will appear in its
place; there are a total of four laser blasters. If you
vaporize the entire squadron of drones, a new
squadron will appear.
1. Begin pedaling or press any button on the con-
sole to turn on the console.
A moment after you begin pedaling or press a but-
ton, the display will light.
As you play, the drones will move faster and
faster. The game will continue until all four laser
blasters are disabled or a drone reaches the bot-
tom of the arena.
2. Select the Calorie Destroyer game.
To select the Calorie Destroyer game, press the
Fitness Games button repeatedly until the word
DESTROYER appears at the top of the display.
When the game ends, the display will show the
level of play that you reached and your final score.
The display will then show the four highest scores
recorded since the scores were reset. If desired,
press and hold down the right button on either
controller to reset the scores. Note: If your score is
one of the four highest, the display will prompt you
to enter a name consisting of three letters or dig-
its. While the line below the first letter is flashing,
press the up and down buttons on either controller
to select the desired letter or digit. Next, press the
right button on either controller and select another
letter or digit. Repeat this process to select a third
letter or digit. Then, press the right button on either
controller again. The display will then show the
four highest scores recorded since the scores
were reset.
3. Pedal to start the game.
When you start the Calorie Destroyer game, a
game arena will appear in the display. Three rows
of drones will begin to move across the top of the
arena, periodically firing their lasers downward.
Each time the drones reach the left or right side of
the arena, they will reverse direction and move
downward.
4. Follow your progress with the display.
While you exercise and play the Calorie Destroyer
game, the upper left corner of the display will show
the elapsed time. In addition, the display will show
the game level that you have reached and your
current score.
To pause the game, press the Display button. To
resume the game, press the Display button repeat-
edly until the word DESTROYER appears at the
top of the display, and then begin pedaling.
At the bottom of the arena is a laser blaster. You
can fire the laser blaster at the drones by pressing
the up button on either controller. In addition, while
you are pedaling, you can move the laser blaster
to the left or right using the left and right buttons
on either controller. The faster you pedal, the
faster the laser blaster will move.
5. When you are finished exercising, the console
will turn off automatically.
See step 6 on page 13.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
HOW TO PLAY THE BLACKJACK GAME
Blackjack is a casino-style card game in which you
compete against the dealer to win credits. Your goal
during each hand of the game is to have the highest
point total that does not exceed 21 points. You will use
the interactive touch screen on the display to play the
game. Follow the steps below to play Blackjack.
Note: For detailed instructions on how to play
Blackjack, consult a card game rule book or other
card game resource.
1. Begin pedaling or press any button on the con-
sole to turn on the console.
Count the point total of your cards and tap the
screen to select a game option. You can choose to
HIT, STAND, or DOUBLE. Repeat this action as
necessary until the hand ends.
A moment after you begin pedaling or press a but-
ton, the display will light.
2. Select the Blackjack game.
When the hand ends, the result and the point
totals for you and the dealer will appear in a box
on the right side of the display. To continue the
game, tap the center of the screen.
To select the Blackjack game, press the Fitness
Games button repeatedly until the word
BLACKJACK appears at the top of the display.
3. Tap the screen to start the game.
The game will continue in this way indefinitely or
until you have no credits available to bet. If you
have no credits to bet, the words GAME OVER
and the game time will appear in the display. To
play Blackjack again, tap the prompt box on the
screen. To exit the game at any time, press the
Fitness Games button.
As you pedal, tap the screen to begin the
Blackjack game. After a moment, the words
PLACE YOUR BET will appear in the display. Tap
the screen to select the amount you want to bet on
this hand. Note: You begin each game with 500
credits. As you win or lose credits during the
game, your current total will be shown in the upper
right corner of the display.
4. Follow your progress with the display.
While you pedal and play the Blackjack game, the
upper left corner of the display will show the
elapsed time. To view additional exercise informa-
tion, press the Display button repeatedly.
After you place a bet, a representation of a game
table will appear in the display. The dealer’s cards
will appear in the upper left corner of the display.
Your cards will appear in the lower left corner of
the display. The game options will appear in three
boxes on the right side of the display.
5. When you are finished exercising, the console
will turn off automatically.
See step 6 on page 13.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
HOW TO PLAY THE TEXAS HOLD ‘EM GAME
the display. The black X in the display indicates
the location of the dealer button. The black arrow
indicates which player’s turn it is.
Texas Hold ‘Em is a popular poker game in which you
compete against other players to win credits. Your
objective is to form the best five-card poker hand from
your two hole cards and the five community cards
shared by all the players. You will use the interactive
touch screen on the display to play the game. Follow
the steps below to play Texas Hold ‘Em. Note: For
detailed instructions on how to play Texas Hold
‘Em, consult a card game rule book or other card
game resource.
When it is your turn, assess your cards and tap
the C/R/F game option box to make a betting deci-
sion; you can choose to CALL, RAISE, or FOLD.
You can also tap the CARDS box to view your
cards and any community cards on the table
before making a decision. Note: In some circum-
stances, you can choose to CHECK instead of
CALL.
1. Begin pedaling or press any button on the con-
sole to turn on the console.
If you decide to RAISE, tap the upward and down-
ward arrow boxes to select the desired number of
credits, and then tap the OK box.
A moment after you begin pedaling or press a but-
ton, the display will light.
After you make your betting decision, play will con-
tinue with the other players. Continue to make bet-
ting decisions throughout the betting rounds and
the deals. When the flop is dealt, three cards will
appear in the upper left area of the display.
Additional cards will appear in this area when the
turn and river are dealt. Assess these cards and
make betting decisions as before. During the
game, the other players may fold, bust, or contin-
ue to a showdown.
2. Select the Texas Hold ‘Em game.
To select the Texas Hold ‘Em game, press the
Fitness Games button repeatedly until the words
TEXAS HOLD ‘EM appear at the top of the dis-
play.
3. Tap the screen to start the game.
As you pedal, tap the screen to begin the Texas
Hold ‘Em game. After you start the game, a repre-
sentation of a game table will appear in the dis-
play. Your hole cards will be shown in the lower
left corner of the display. The number of credits in
the pot will be shown in the black box in the center
of the display. The amount bet by each player will
be shown along the right side of the display. A
game option box will be shown below the pot.
The player with the best five-card hand in any
combination of hole and community cards will win
the showdown.
After the showdown, the word WINS: will appear in
the center of the display. The number of credits
won by each player will be shown along the right
side of the display. To view the cards held by the
other players, tap the number of credits won by
each player.
The game will continue in this way until you win all
the other players’ credits or until you have no cred-
its available to bet. To exit the game at any time,
press the Fitness Games button.
4. Follow your progress with the display.
While you pedal and play the Texas Hold ‘Em
game, the upper left corner of the display will show
the elapsed time. To view additional exercise infor-
mation, press the Display button repeatedly.
5.
When you are finished exercising, the console
will turn off automatically.
During the game, player information will appear
along the right side of the display. Your player
information is located in the lower right corner of
See step 6 on page 13.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
MAINTENANCE AND TROUBLESHOOTING
Inspect and tighten all parts of the exercise cycle reg-
ularly. Replace any worn parts immediately.
HANDGRIP PULSE SENSOR TROUBLESHOOTING
If the handgrip pulse sensor does not function properly,
see step 5 on page 13.
To clean the exercise cycle, use a damp cloth and a
small amount of mild soap. Important: To avoid dam-
age to the console, keep liquids away from the
console and keep the console out of direct sun-
light.
HOW TO MOVE THE EXERCISE CYCLE
To move the exercise cycle, hold the handle on the
rear stabilizer and carefully lift it until the exercise
cycle can be moved on the front wheels. Carefully
move the exercise cycle to the desired location and
then lower it.
BATTERY REPLACEMENT
If the console display becomes dim, the batteries
should be replaced; most console problems are the
result of low batteries. See assembly step 5 on page
7 for replacement instructions.
HOW TO LEVEL THE EXERCISE CYCLE
After the exer-
cise cycle has
been moved to
the location
Wheel
where it will be
used, make sure
that the ends of
Leveling
Foot
both front stabi-
lizer are touching
the floor. If the
exercise cycle
rocks slightly during use, turn one or both of the level-
ing feet under the front stabilizers until the rocking
motion is eliminated.
Handle
19
Download from Www.Somanuals.com. All Manuals Search And Download.
EXERCISE GUIDELINES
Burning Fat—To burn fat effectively, you must exer-
cise at a low intensity level for a sustained period of
time. During the first few minutes of exercise, your
body uses carbohydrate calories for energy. Only after
the first few minutes of exercise does your body begin
to use stored fat calories for energy. If your goal is to
burn fat, adjust the intensity of your exercise until your
heart rate is near the lowest number in your training
zone. For maximum fat burning, exercise with your
heart rate near the middle number in your training
zone.
WARNING:
Before beginning
this or any exercise program, consult your
physician. This is especially important for
persons over the age of 35 or persons with
pre-existing health problems.
The pulse sensor is not a medical device.
Various factors may affect the accuracy of
heart rate readings. The pulse sensor is
intended only as an exercise aid in determin-
ing heart rate trends in general.
Aerobic Exercise—If your goal is to strengthen your
cardiovascular system, you must perform aerobic
exercise, which is activity that requires large amounts
of oxygen for prolonged periods of time. For aerobic
exercise, adjust the intensity of your exercise until
your heart rate is near the highest number in your
training zone.
These guidelines will help you to plan your exercise
program. For detailed exercise information, obtain a
reputable book or consult your physician. Remember,
proper nutrition and adequate rest are essential for
successful results.
WORKOUT GUIDELINES
EXERCISE INTENSITY
Warming up—Start with 5 to 10 minutes of stretching
and light exercise. A warm-up increases your body
temperature, heart rate, and circulation in preparation
for exercise.
Whether your goal is to burn fat or to strengthen your
cardiovascular system, exercising at the proper inten-
sity is the key to achieving results. You can use your
heart rate as a guide to find the proper intensity level.
The chart below shows recommended heart rates for
fat burning and aerobic exercise.
Training Zone Exercise—Exercise for 20 to 30 min-
utes with your heart rate in your training zone. (During
the first few weeks of your exercise program, do not
keep your heart rate in your training zone for longer
than 20 minutes.) Breathe regularly and deeply as you
exercise–never hold your breath.
Cooling down—Finish with 5 to 10 minutes of
stretching. Stretching increases the flexibility of your
muscles and helps to prevent post-exercise problems.
EXERCISE FREQUENCY
To find the proper intensity level, find your age at the
bottom of the chart (ages are rounded off to the near-
est ten years). The three numbers listed above your
age define your “training zone.” The lowest number is
the heart rate for fat burning, the middle number is the
heart rate for maximum fat burning, and the highest
number is the heart rate for aerobic exercise.
To maintain or improve your condition, complete three
workouts each week, with at least one day of rest
between workouts. After a few months of regular exer-
cise, you may complete up to five workouts each
week, if desired. Remember, the key to success is to
make exercise a regular and enjoyable part of your
everyday life.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
PART LIST—MODEL NO. 30711.0
R0607A
Key No. Qty.
Description
Key No. Qty.
Description
1
1
1
1
1
2
2
1
1
1
2
1
2
1
1
1
1
2
1
2
2
1
1
1
1
1
1
1
1
1
1
1
1
2
1
1
1
1
1
1
1
1
1
1
7
1
1
1
Frame
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
*
2
1
2
1
4
11
6
14
1
14
1
4
1
1
1
4
2
1
2
1
1
2
1
4
3
4
1
1
4
4
4
4
4
4
1
1
8
2
1
3
2
2
4
2
–
–
Rear Stabilizer Endcap
Foam Grip
2
Upright
3
Backrest Bracket
Console
Flange Screw
4
Rear Wire Harness
5
Crank Cover
Accent Ring
Upright Knob
Backrest
M8 x 50mm Button Screw
M6 Nylon Locknut
M8 x 16mm Button Screw
M8 Split Washer
6
7
8
9
Seat
Seat Rail Endcap
M4 x 16mm Screw
Lower Wire Harness
Small Snap Ring
Tension Wheel
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
Game Grip
Seat Bracket
Controller
Left Front Side Shield
Right Front Side Shield
Left Front Stabilizer
Rear Stabilizer
Wheel
Left Controller Wire
M10 x 63mm Bolt Set
Wheel Bushing
M4 x 10mm Screw
Stop Block
Right Pedal Strap
Leveling Foot
Upright Bushing
Right Pedal
Front Stabilizer Endcap
Seat Bracket Endcap
Upright Cover
Left Pedal
Wheel Bolt
Right Crank Arm
Left Crank Arm
Left Pedal Strap
Left Side Shield
Right Side Shield
Large Snap Ring
Pulley
M4 x 12mm Screw
Seat Carriage Wheel
M6 x 38mm Button Screw
M6 x 20mm Button Bolt
Water Bottle Holder
Tension Spring
M5 x 16mm Button Screw
M8 x 19mm Button Screw
Seat Carriage Block
Block Snap Ring
M4 x 16mm Round Head Screw
M6 x 42mm Button Screw
Right Controller Wire
Frame Endcap
Magnet
Crank
Steel Washer
Crank Bearing
Eddy Mechanism
Eddy Axle Assembly
Pillow Block
Resistance Motor
Idler Pulley
M4 x 19mm Screw
Crank Cover
Idler
Rail
Right Front Stabilizer
Seat Carriage
Upper Wire Harness
Main Wire Harness
M6 Washer
M6 x 50mm Bolt
Tension Plate
M8 Jamnut
M6 Split Washer
M4 x 12mm Screw
Hex Key
Clamp
Reed Switch/Wire
Drive Belt
*
User’s Manual
Specifications are subject to change without notice. See the back cover of this manual for information about
ordering replacement parts. *These parts are not illustrated.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
EXPLODED DRAWING A—MODEL NO. 30711.0
R0607A
10
12
9
64
57
77
12
10
55
77
84
11
55
57
67
64
13
57
55
77
55
77
84
57
8
6
5
74
3
49
79
71
59
79
78
72
41
78
5
44
6
71
59
72
57
78
79
44
78
79
44
44
14
57
57
81
84
26
27
84
91
91
84
57
84
22
Download from Www.Somanuals.com. All Manuals Search And Download.
EXPLODED DRAWING B—MODEL NO. 30711.0
R0607A
80
4
2
62
21
20
51
31
18
69
17 63
66
20
63
23
89
85
57
50
68
62
73
40
19
42
29
73
7
55
54
38
55
54
53
90
53
53
32
45
28
90
57
46
37
39
35
53
70
30
33
34
84
33
36
76
24
50
87
65
76
87
85
83
87
89
63
53
17
76
63
86
53
15
69
76
53
88
66
75
55
60
56
1
88
55
19
43
48
54
58
25
22
16
47
82
61
55
48
52
23
Download from Www.Somanuals.com. All Manuals Search And Download.
ORDERING REPLACEMENT PARTS
To order replacement parts, please see the front cover of this manual. To help us assist you, be prepared to
provide the following information when contacting us:
• the model number and serial number of the product (see the front cover of this manual)
• the name of the product (see the front cover of this manual)
• the key number and description of the replacement part(s) (see the PART LIST and the EXPLODED
DRAWING near the end of this manual)
LIMITED WARRANTY
ICON OF/DU CANADA (ICON) warrants this product to be free from defects in workmanship and mater-
ial, under normal use and service conditions, for a period of one (1) year from the date of purchase. There
is a lifetime warranty on the frame. This warranty extends only to the original purchaser. ICON's obliga-
tion under this warranty is limited to replacing or repairing, at ICON's option, the product through one of
its authorized service centers. All repairs for which warranty claims are made must be pre-authorized by
ICON. If the product is shipped to a service center, freight charges to and from the service center will be
the customer’s responsibility. For in-home service, the customer will be responsible for a minimal trip
charge. This warranty does not extend to any product or damage to a product caused by or attributable
to freight damage, abuse, misuse, improper or abnormal usage or repairs not provided by an ICON autho-
rized service center; products used for commercial or rental purposes; or products used as store display
models. No other warranty beyond that specifically set forth above is authorized by ICON.
ICON is not responsible or liable for indirect, special or consequential damages arising out of or in con-
nection with the use or performance of the product or damages with respect to any economic loss, loss
of property, loss of revenues or profits, loss of enjoyment or use, costs of removal or installation or other
consequential damages of whatsoever nature. Some states do not allow the exclusion or limitation of inci-
dental or consequential damages. Accordingly, the above limitation may not apply to you.
The warranty extended hereunder is in lieu of any and all other warranties and any implied warranties of
merchantability or fitness for a particular purpose is limited in its scope and duration to the terms set forth
herein. Some states do not allow limitations on how long an implied warranty lasts. Accordingly, the above
limitation may not apply to you.
This warranty gives you specific legal rights. You may also have other rights which vary from state to state.
ICON OF/DU CANADA, Inc., 900 de l’Industrie, St. Jerôme, QC J7Y 4B8
Part No. 257500 R0607A
Printed in China © 2007 ICON IP, Inc.
Download from Www.Somanuals.com. All Manuals Search And Download.
|