Raymarine GPS Receiver Platinum Chart Card User Guide

Navionics  
Platinum Chart  
Card  
User’s Guide  
Document Number: 81259-1  
Date: June 2005  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Contents  
i
Contents  
Important information .............................................................................................. 1  
Introduction ...................................................................................................1  
Safety notices .................................................................................................1  
Disclaimers ....................................................................................................1  
About this manual .........................................................................................2  
Technical accuracy .........................................................................................2  
Introduction ................................................................................................................ 3  
2D cartography ..............................................................................................3  
Enhanced features ....................................................................................3  
New features.............................................................................................3  
3D bathymetric charts ....................................................................................3  
2D Chart Enhancements ............................................................................................. 4  
Introduction ...................................................................................................4  
New Port Services ...............................................................................................6  
Pilot book information ...................................................................................6  
Panoramic photos ..........................................................................................7  
New cartographic objects ...................................................................................8  
Business services ...........................................................................................8  
Additional wrecks ..........................................................................................9  
Major coastal roads .......................................................................................9  
New features ....................................................................................................10  
Aerial photo overlay .....................................................................................10  
Adjusting the level of opaqueness ..........................................................10  
Specifying the overlay area .....................................................................11  
Increased coverage ...........................................................................................11  
Changed control ...............................................................................................11  
Additional menu items ......................................................................................11  
3D Cartography ......................................................................................................... 12  
An introduction .................................................................................................12  
The application ............................................................................................13  
Using the 3D chart ............................................................................................14  
Set-up ..........................................................................................................14  
Controls .......................................................................................................14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ii  
Navionics Platinum Chart Card - User’s Guide  
Rotary control .........................................................................................14  
Range button..........................................................................................14  
Trackpad .................................................................................................14  
Soft keys..................................................................................................15  
Changing the mode ..........................................................................................16  
Active motion mode .....................................................................................16  
Planning mode .............................................................................................16  
Changing the view ............................................................................................17  
View options ................................................................................................17  
Multiple views .............................................................................................18  
Making the view clearer ...................................................................................19  
Exaggeration ...............................................................................................19  
Declutter ......................................................................................................20  
Using 2D and 3D charts together ......................................................................20  
3D view locator ............................................................................................21  
Chart synchronization ..................................................................................21  
Navigating with 3D charts ................................................................................22  
Technical support ..............................................................................................24  
For Raymarine products ...............................................................................24  
United States ..........................................................................................24  
Europe ....................................................................................................24  
For Navionics cartography ...........................................................................25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Important Information  
1
Important information  
Introduction  
This handbook introduces the Navionics Platinum chart card and its features. These  
chart cards are intended for recreational marine use.  
Safety notices  
WARNING:Navigation aid  
Whenthisproductisusedwithinanavigationsystem, itisonlyan  
aid to navigation. Its accuracy can be affected by many factors,  
including equipment failure or defects, environmental  
conditions and improper handling. It is the user’s responsibility  
toexercisecommonprudenceandnavigationaljudgements.This  
product should not be relied upon as a substitute for such  
prudence and judgement. Always maintain a permanent watch  
so that you can respond to situations as they develop.  
WARNING:Product installation  
This equipment must be operated in accordance with the  
Raymarine instructions provided. Failure to do so could result in  
poor product performance, personal injury and/or damage to  
your boat.  
Disclaimers  
This electronic chart is an aid to navigation designed to facilitate the use of authorized  
government charts, not to replace them. Only official government charts and notices  
to mariners contain the current information needed for the safety of navigation, and  
the Captain is responsible for their prudent use.  
This program and its charts do not exclude the user from carrying the required official  
charts and documents.  
Raymarine does not warrant that this product is error-free or that it is compatible with  
products manufactured by any person or entity other than Raymarine.  
This product utilizes digital chart data, and electronic information from the Global  
Positioning System (GPS) which may contain errors. Raymarine does not warrant the  
accuracy of such information and you are advised that errors in such information may  
cause the product to malfunction or give incorrect readings. Raymarine is not  
responsible for damages or injuries caused by your use or inability to use the product,  
by the interaction of the product with products manufactured by others, or by errors in  
chart data or information utilized by the product and supplied by third parties.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
2
Navionics Platinum Chart Card - User’s Guide  
About this manual  
This manual describes how to install and operate your display with the Navionics  
Platinum Chart Card. It assumes that the display(s) in which the software is to be  
installed meets the requirements for running this version of the software, and that all  
peripheral equipment to be operated with it is compatible and has been correctly  
installed.  
This manual is intended for users of varying marine abilities, but assumes a general  
level of knowledge of display use, nautical terminology and practices.  
Technical accuracy  
To the best of our knowledge, the technical information contained within this  
handbook, was correct at the time of printing. However, Raymarine cannot accept  
liability for any inaccuracies or omissions it may contain.  
If you wish to file a report of an error or omission on a Navionics chart, please provide  
the information to the Navionics web site, Discrepancy Report section at the link  
below:  
For details of how to contact Raymarine or Navionics see page 24 and page 25.  
In addition, Raymarine’s policy of continuous product improvement may change  
specifications without notice. As a result Raymarine cannot accept liability for any  
differences between the product and this handbook.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Introduction  
3
Introduction  
This User’s Guide introduces the Navionics Platinum chart card. Used in conjunction  
with your Raymarine display, you will be able to access new and enhanced features  
that will give you an accurate, easy-to-view image of the area around your boat.  
Operation of the charts and their features is similar to the way in which existing chart  
cards are operated. For full details please refer to the relevant display handbook.  
Note: The range at which these features appear may vary between display types and sizes.  
2D cartography  
The Platinum chart card enhances many of the conventional 2D cartographic features  
and introduces several new ones.  
Enhanced features  
• Additional business services information e.g. local restaurants, shops etc.  
• Additional wrecks data for new wrecks.  
• Major coastal roads.  
• US inland waterways.  
New features  
• Panoramic photos for many of the ports and marinas on the chart.  
• Pilot book information for many ports.  
• Aerial photo overlay of land and coastal waters.  
• 2D and 3D (new application) synchronization.  
• 3D locator indicating the area covered by the 3D view.  
3D bathymetric charts  
Navionics Platinum introduces the new 3D chart application. This provides you with a  
three dimensional graphical view of land and sea contours around your boat.  
3D cartography has the following features:  
• Choice of operating modes, Active or Planning.  
• Change of view point.  
• 360o degree rotation of the selected view.  
• Vertically exaggerate the view.  
• Ability to indicate the area which your fishfinder transducer cone covers (if fitted).  
To obtain the best results from thisapplication you should make sure that your display  
is receiving accurate heading and position data from a suitable source.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4
Navionics Platinum Chart Card - User’s Guide  
2D Chart Enhancements  
Introduction  
Additional wreck data  
(when available)  
Panoramic photo symbol  
(also accessed via Port Services)  
Major coastal roads  
Aerial photo overlay  
(60%, land and sea)  
Business services  
information  
Port services  
(now includes Panoramic Photo  
and Pilot Book information)  
The Navionics Platinum chart card provides additional features that enhance the 2D  
cartography described in your display’s manual.  
New Port Services  
• Panoramic photos.  
• Pilot book information.  
New cartographic objects  
• Business services information.  
• Additional wrecks data.  
• Major coastal roads.  
• Panoramic photos.  
New features  
In addition to Radar Overlay, Chart Layers now includes:  
• Aerial photo overlay.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
2D Chart Enhancements  
5
• 3D locator (see page 21).  
• 2D/3D chart synchronization (see page 21).  
Increased coverage  
• In addition to coastal regions, the Platinum chart card also covers US lakes and  
inland waterways.  
Changed control  
• The radar overlay is now controlled via the chart layers soft key and the radar/chart  
synchronization via the chart mode and orientation soft key.  
Additional menu items  
• The Cartography Setup Menu now includes additional menu items to cover the  
new cartographic objects and the aerial photo overlay.  
Notes: (1) For further informationrelatingtoyour particular display, please refer tothe indi-  
vidual User’s Manual.  
(2) For details of how to combine 2D and 3D features, please refer to page 20.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
6
Navionics Platinum Chart Card - User’s Guide  
New Port Services  
Port Services include pilot book information and panoramic photos (if available).  
Panoramic photos are also shown as a camera symbol on the chart.  
If required, you can remove port services from your chart by switching on the  
DECLUTTER option accessed via the PRESENTATION soft key.  
Pilot book information  
This feature will enable you to view detailed information normally contained in an  
almanac e.g.  
To view pilot book information:  
1. Select the Port Services symbol on screen and press OK.  
2. Select the pilot book option and then scroll right to enter the option.  
3. Select the required book/chapter and press VIEW PILOT BOOK to display the infor-  
mation.  
You can now navigate around the book as follows:  
• To move between the pages of the selected chapter, use the PREVIOUS PAGE or  
NEXT PAGE soft keys.  
• To display the various indexes, use the PAGE INDEX, CHAPTER INDEX or BOOK  
INDEX soft keys.  
• To scroll through an index or through the text within a page, use the trackpad (up/  
down) or the rotary control.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
2D Chart Enhancements  
7
Panoramic photos  
You can display a panoramic photo(s) of many ports and marinas. The availability of  
photos is indicated by a camera symbol on the chart. This symbol is placed where the  
photo was taken and the angle of the shot is indicated by the camera symbol. You can  
also view the photo from the port services information.  
To display a panoramic photo, either:  
• Select the appropriate port symbol and then the panoramic photos option. Press  
VIEW PHOTO.  
Or:  
Select the appropriate camera icon and press VIEW PHOTO.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
8
Navionics Platinum Chart Card - User’s Guide  
New cartographic objects  
The following new cartographic objects are now available:  
• Business services.  
• Additional wrecks.  
• Major roads.  
If required, you can declutter your chart by either switching off the individual object  
type on the Cartography Setup Menu or by switching on the DECLUTTER option  
accessed via the PRESENTATION soft key.  
Business services  
Example:  
Service  
station  
Boat  
dealership  
Restaurant  
Doctors  
Hairdressers  
Bank  
It is now possible to view the name, address, telephone number, and type of business  
of an individual business by selecting its symbol on screen.  
To display additional information about the service, select the appropriate symbol on  
screen and then press OK.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
2D Chart Enhancements  
9
Additional wrecks  
Navionics Platinum cartography provides details of wrecks that you would find on a  
paper chart together with detailed data for additional wrecks.  
To display additional information about the object, select the wreck on the Object Info  
screen.  
Major coastal roads  
Interstate highway/  
Motorways  
State highway/  
Major roads  
Highways/  
Minor roads  
With Platinum cartography you can view coastal interstate and state highways,  
motorways and other major roads.  
Note: If the aerial overlay feature (see page 10) is switched on and set to Land and Sea Mode  
in the Cartography Setup Menu, these roads will fade as the level of opaqueness is decreased.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
10  
Navionics Platinum Chart Card - User’s Guide  
New features  
The Chart Layers option now includes:  
• Aerial photo overlay.  
• 3D locator (see page 21).  
• 2D/3D chart synchronization (see page 21).  
Aerial photo overlay  
The aerial photo overlay feature will help you to interpret your environment and its  
features. They cover the navigable waters up to 3 miles inside the coastline. Beyond  
these limits the land will appear green (color charts) or grey (black and white charts).  
The level of resolution and the availability of a colored overlay is dependent on the  
region covered by the chart card.  
Aerial photo overlay is accessed via the PRESENTATION and CHART LAYERS soft keys  
and can be applied to individual chart windows.  
Adjusting the level of opaqueness  
You can adjust the balance between the chart and the aerial photograph by changing  
the overlay’s level of opaqueness.  
Examples:  
70% level  
40% level  
20% level  
Download from Www.Somanuals.com. All Manuals Search And Download.  
2D Chart Enhancements  
11  
Note: Any changes that you make will affect all displays in your system.  
Specifying the overlay area  
You can specify whether the overlay is displayed for land areas only or for land and sea  
areas, via the Cartography Setup menu.  
Land and sea overlay  
Land only overlay  
D7921_1  
Increased coverage  
In addition to coastal regions, the Platinum chart card also covers US lakes and inland  
waterways.  
Changed control  
Radar Overlay - Now controlled via the PRESENTATION and CHART LAYERS soft  
keys.  
Radar/chart synchronization - Now controlled via the PRESENTATION -  
CHART MODE & ORIENTATION - CHART SYNC - RDR soft keys.  
Note: The 2D chart can be synchronised with either the radar or the 3D chart (see page 21),  
but not both.  
Additional menu items  
TheCartographySetupMenunowincludescontrolstoswitchBusinessServices,Roads  
and Additional Wrecks on/off, and to select either land or land and sea for the Aerial  
Photo Overlay.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
12  
Navionics Platinum Chart Card - User’s Guide  
3D Cartography  
An introduction  
3D cartography introduces an easy-to-use chart format that provides you with a  
graphical view of land and sea contours around your boat. Land masses are shown in  
green, the shade depending on the height above sea level. Water, the sea-bed and  
submerged objects are shown in varying shades of blue.  
Much of the information available on a conventional chart can be shown in three  
dimensions, giving you an accurate easy-to-view image of the area around your boat  
that can help you plan:  
• Fishing spots.  
• What fishing pattern to use.  
• Safe routes.  
If the area that you are in is new to you, or visibility is poor, 3D cartography can help to  
give you the confidence to know where you are and what is around you. As with a  
conventional chart, active waypoints and routes can also be shown on the 3D chart.  
3D cartography has the following features:  
• Choice of operating modes; Active or Planning.  
• Ability to change view point.  
• 360o degree rotation of the selected view.  
• 1o - 90o pitch angle.  
• Exaggerate the view.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3D Cartography  
13  
• Ability to synchronize 2D and 3D charts.  
• Ability to indicate the area that your fishfinder transducer cone covers (if fitted).  
To obtain the best results from the 3D cartography application you should make sure  
that your display is receiving accurate heading and position data from a suitable  
source.  
The application  
When you choose to set up your display to use 3D cartography, the application opens  
in the selected window. Depending on how your display is set up, this can be full  
screen, or part of a page set.  
For full details of Page Set up refer to your display handbook.  
Range  
Mode  
Rotation  
Horizontal distance across screen  
(halfway up the window or at  
center of view).  
Shows the mode in  
which the application  
is working.  
Shows in degrees true,  
how far the on-screen  
view has been rotated  
from your boat's heading.  
Shown in selected system units.  
Cartographic objects  
Select objects for display  
via the 3D Chart Setup  
menu.  
Center-of-view Boat symbol Depth scale North arrow  
White cross Boat's position Approximate 3D indication  
indicates center of on chart. Select depth beneath of True North  
chart view.  
Waypoint  
With arrival circle  
sail or power  
boat.  
your boat.  
in relation to  
the chart view.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
14  
Navionics Platinum Chart Card - User’s Guide  
Using the 3D chart  
Set-up  
Before using 3D cartography you should set-up the chart to show you the information  
thatis needed forthe particularoperationthat you are doing. Settings forthe chart are  
accessed via the MENU hard key - 3D Chart Setup and let you change:  
Center-of-view indicator - Turn the center-of-view indicator (marked with a  
white cross) ON/OFF.  
Boat symbol - Choose between power or sail.  
Aerial photo overlay - Turn aerial photo overlay ON/OFF.  
Chart text - Turn chart text ON/OFF.  
Navigation marks - Turn navigation marks ON/OFF.  
Controls  
The 3D chart is operated in a similar way to a 2D chart using the following controls:  
• Rotary control.  
• Range button  
• Trackpad.  
• Soft keys.  
Rotary control  
This is used to:  
• Rotate the chart view (0o-360o).  
• Change the pitch (vertical angle of view) of the chart (1o to 90o).  
Pressing the rotary knob will toggle control between the rotation and pitch functions.  
A soft key indicates which function is active.  
The rotary control is always active to adjust pitch/rotation (even when the soft key sub-  
menus are displayed, except when adjusting exaggeration).This is different to most  
other uses of the rotary, which require you to press a soft key to enable adjustment.  
Range button  
This lets you zoom in or out on the 3D chart in a similar way to 2D charts.  
• Range In - shows a smaller area of the chart.  
• Range Out (to approximately 8 nm) - shows a larger area of the chart.  
Trackpad  
This is used to pan around the chart - similar to 2D charts  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3D Cartography  
15  
Soft keys  
ADJUST ON  
EYE CENTRE  
ADJUST  
ROTATE PITCH  
FIND SHIP  
GO TO...  
PRESENTATION...  
You can also change the view of the 3D chart using the following soft keys:  
FIND SHIP  
Pressing this soft key at any time will return to the active motion mode, forward  
looking chart view.  
GO TO  
This enables you to select an existing route to follow or a waypoint to go to.  
ADJUST ON  
This enablesyouto choose whichpointonthe screen the chart will move aroundwhen  
you use the rotary control and gives the following options:  
EYE - rotates or pitches the chart around the virtual eye point, maintaining a rela-  
tive positionfromthe virtualeyepointtothe on-screenboat. Usefultogetanaerial  
overview of the terrain.  
CENTER - rotates or pitches the chart around the center-of-view cross on the chart.  
Useful to view a particular feature in close up.  
ADJUST  
Enables you to choose how the rotary control adjusts the view and gives the following  
options:  
ROTATE - enables you to rotate the chart through 360o. If you want to maintain a  
view from a particular bearing, just use the rotary control to rotate the picture until  
you see the required view. The chart will automatically update.  
PITCH - enables you to change the level at which you view the chart. This can be  
from sea-level to a full aerial view. You cannot view the chart from underwater.  
PRESENTATION  
Enables you to access the following sub-menus:  
TRANSDUCER CONE  
If you have a fishfinder in your system, you can display the transducer cone to indi-  
cate the area that it covers on the 3D chart. This is useful when fishing as it enables  
you to compare the chart view withthe information your fishfinder is showing you.  
DEPTH SCALE  
You can display a line under your boat to indicate the depth. However, remember  
that this depth is only approximate, a more accurate reading of depth is available  
elsewhere in your system.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
16  
Navionics Platinum Chart Card - User’s Guide  
3D OPTIONS  
You can change the direction of the view (see page 17), adjust the exaggeration  
(see page 19) or change the vessel offset.  
WAYPOINT NAME  
You can turn the waypoint name on or off as required.  
DECLUTTER  
See page 20.  
Changing the mode  
You can choose to view the chart in one of two modes:  
• Active motion mode.  
• Planning mode.  
Active motion mode  
This is the default mode when you open the 3D application provided that there is a  
valid fix. The screen shows an aerial view of the3D chart as if you are above your boat,  
slightly behind it and looking forward (eye point). You can also view the chart from  
different positionsrelative to your boat - see “View optionson page 17. As your boat  
moves forward the chart automatically updates and reveals the changing view ahead.  
Inactive motion mode you canadjust the pitchwhenADJUST ONis setto CENTER, but  
rotating or panning the chart will put it into planning mode.  
Planning mode  
Planning mode enables you to view an area of the chart, different to the one in which  
you are navigating.  
To enter planning mode, just use the trackpad to pan to the area of the chart that you  
want to view or turn the rotary control. This may require you to change the rotation of  
the chart or change the range, making it easier to see a particular location.  
All of the functions that are available in active motion mode can be used in planning  
mode. Control of the chart is the same as working in active motion mode. However,  
you will see that mode information in the status bar is shown in brackets to indicate  
that you are in planning mode.  
Pressing the FIND SHIP soft key will return the chart to active motion mode, showing  
the chart in the forward looking view at your current position.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3D Cartography  
17  
Changing the view  
View options  
In active motion mode there are four view options that you can choose from:  
• Forward.  
• Aft.  
• Port.  
• Starboard.  
With each view the eye point is changed to show a different area of the chart.  
ROTATE 195oT  
2.431nm  
AFT  
ROTATE 011oT  
2.431nm  
FWD  
AFT  
FWD  
Aft  
Forward  
Default view.  
Eye point above and behind the boat,  
looking forward.  
Eye point above and in front of the boat,  
looking behind it.  
Pressing FIND SHIP resets to this view.  
ROTATE 106oT  
2.431nm  
STB  
ROTATE 280oT  
2.431nm  
PRT  
PRT  
STB  
Port  
Starboard  
Eye point above and to port side of boat,  
looking to starboard.  
Eye point above and to starboard side of  
boat, looking to port.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
18  
Navionics Platinum Chart Card - User’s Guide  
View options are accessed via the PRESENTATION - 3D VIEW OPTIONS - VIEW TO soft  
keys. The current option is highlighted on the soft keys and displayed in the status bar.  
Multiple views  
You can display multiple 3D chart views by creating a page that shows 3D cartography  
in up to 4 windows. As each window is a separate application, they can be set up to  
operate in active motion mode or planning mode or a combination of the two.  
These can be views of:  
• The same area of the chart from different angles.  
• Views of up to 4 different areas of the chart.  
Note: For full details of page set up and “active” windows refer to your display handbook.  
Multiple 3D views  
Example:  
Four 3D application windows showing the same area of the chart but from 4 different angles.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3D Cartography  
19  
Making the view clearer  
You can make the view clearer using the following features:  
• Exaggeration.  
• Declutter.  
Exaggeration  
Exaggeration factor x1  
Exaggeration factor x50  
D8057_1  
Sometimes it is easier to see certain topographical features by making them more  
obvious. This could be particularly helpful if you are fishing, for example.  
Adjusting the exaggeration has the effect of vertically stretching objects on the chart,  
making it easier to see their shape and position.  
Exaggeration is accessed via the PRESENTATION - 3D VIEW OPTIONS - ADJUST  
EXAGGERATION soft keys. Once selected you can:  
• Use the rotary control or trackpad to alter the exaggeration factor (1-50) displayed  
in the sliding scale above the soft key.  
• Press CANCEL at any time during adjustment to return exaggeration to its previ-  
ous setting.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
20  
Navionics Platinum Chart Card - User’s Guide  
Declutter  
Declutter OFF  
Declutter ON  
Navigating in an area that shows a lot of information on the chart, such as navigation  
marks, can be confusing. Depending on your chart view level it can make features or  
even your position difficult to see. Declutter helps you to reduce this confusion and  
make the chart clearer, by removing some objects from view.  
Declutter is accessed via the PRESENTATION soft key sub-menu.  
Using 2D and 3D charts together  
If the area in which you are navigating is unfamiliar, or visibility is poor, working with  
2D and 3D chart applications on the screen side-by-side can give you extra confidence  
and help you find out what is around you.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3D Cartography  
21  
Your display handbook gives you details of how to set up a page set to view the two  
applications together. With the charts displayed side by side, a comprehensive view of  
the surrounding area is available.  
As with all multiple page sets the active window is indicated by a red border. To make  
changes to an application it must be the active window. For full details refer to your  
display handbook.  
3D view locator  
View locator  
Eye point icon  
On the2D chart you can choose to show the3D viewlocator. This is a polygon outlined  
inblue andextendingfromtheeyepointicon. Thispolygonindicatestheboundariesof  
the area shown on the current 3D chart. As you rotate, adjust pitch or pan the 3D chart  
the view locator moves on the 2D chart and shows the area covered.  
The 3Dview locatorcanbe turnedONandOFFasrequiredinanyactive 2Dwindow via  
the PRESENTATION - CHART LAYERS soft keys.  
Chart synchronization  
Download from Www.Somanuals.com. All Manuals Search And Download.  
22  
Navionics Platinum Chart Card - User’s Guide  
Chart synchronization enables you to synchronize the heading, range and position  
information on the 2D and 3D charts.  
When chart synchronization is ON, please note the following:  
• The 2D-3D synchronization is shown in the status bar of the applications.  
• Soft key options that are not available with this feature are “grayed” out.  
• Pressing FIND SHIP from any synchronized application, will return the 3D chart to  
the default active motion mode view and synchronize the 2D chart to the same  
view.  
• Anychangesmade totheheading, rangeor positionineither2Dor3D charts will  
be displayed in both 2D and 3D windows.  
• If the chart view for the current window is set to SYSTEM and you have multiple  
windows on a page/more than one display, any changes made to a chart will be  
reflected in all windows in all displays.  
• If the chart view for the current window is set to LOCAL, no other windows will be  
affected.  
• You can synchronize the 3D chart or the radar but not both.  
Chart synchronization is accessed via the 2D application; PRESENTATION - CHART  
MODE & ORIENTATION - CHART SYNC - 3D soft keys.  
Navigating with 3D charts  
In your 3D chart you can access the existing waypoint or route list by selecting GOTO -  
FOLLOW ROUTE OPTIONS or GOTO - GO TO WAYPOINT OPTIONS.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3D Cartography  
23  
To navigate to a new waypoint or route, you should first create the waypoint/route in  
your 2D chart. Full details of how to create a route will be found in your display  
handbook.  
Once navigation is active, the 3D chart displays:  
• The active waypoint using the same symbol as the 2D chart.  
• The arrival circle of the waypoint  
• The course of your route (if applicable).  
REMEMBER: A route can only be edited using a 2D chart. Changes made on the 2D  
chart are also shown on the 3D chart.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
24  
Navionics Platinum Chart Card - User’s Guide  
Technical support  
For Raymarine products  
Visit the Customer Support area of our website for Frequently Asked Questions,  
servicing information, e-mail access to the Raymarine Technical Support Departmenta  
and details of Raymarine agents, worldwide.  
United States  
For accessories and parts  
Contact your authorised Raymarine dealer or Raymarine Technical Services on:  
1-800-539-5539 extension 2333 or (603)-881-5200  
Opening hours: Monday through Friday 0815 - 1700, Eastern Standard or Eastern  
Daylight Savings Time.  
To verify your requirements:  
Telephone 1-800-539-5539 extension 2444 or (603)-881-5200  
For product repair and service  
Contact your authorized Raymarine dealer or return the unit to:  
Raymarine Product Repair Center  
21 Manchester Street  
Merrimack, NH03054 - 4801  
1-800-539-5539  
Europe  
For technical support, service and accessories:  
Contact your authorized Raymarine dealer or RaymarineTechnical Support at:  
Anchorage Park  
Portsmouth  
P03 5TD  
England  
Tel: +44(0)23 92714713  
Fax: +44(0)23 92661228  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Technical Support  
25  
For Navionics cartography  
ForquestionsaboutNavionicsPlatinum orNavionicsGoldcartography,pleasecontact  
Navionics directly through their web site:  
or contact Navionics customer support:  
Navionics customer support  
Navionics Italy  
Via Fondacci, 269  
Z.I. Montramito  
55054 Massarosa Italy  
Tel: +39-0584-329111  
Fax: +39-0584-962696  
Navionics USA  
6 Thatcher Lane  
Wareham  
MA 02571 USA  
Toll Free: 800-848-5896  
Tel: 508-291-6000  
Fax: 508-291-6006  
Navionics Australia  
Navionics UK  
134/85 Reynolds Street  
Balmain  
Tel: +61-2-9555-2522  
Fax: +61-2-9555-2900  
NSW 2041 Australia  
PO Box 38  
Plymouth, PL9 8YY England  
Tel: +44-1752-204735  
Fax: +44-1752-204736  
If you wish to file a report of an error or omission on a Navionics chart, please provide  
the information to Navionics web site, Discrepancy Report section at the link below:  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Radio Shack Caller ID Box 999 User Guide
Radio Shack Radio TRC 442 User Guide
RCA CRT Television F32691 User Guide
RTS Network Card Digital Matrix Intercom System User Guide
Ryobi Blower RY09056 User Guide
Ryobi Cordless Saw RJ150V 01 User Guide
Samsung Camcorder WB2100 User Guide
Sanyo Air Conditioner C2462R User Guide
Sanyo Battery Charger UF102248P User Guide
Sears Electric Heater 5833565 User Guide