colortelevisioncolortelevisionco
lortelevisioncolortelevisioncolo
rtelevisioncolortelevisioncolort
elevisioncolortelevisioncolortel
evisioncolortelevisioncolortelev
isioncolortelevisioncolortelevisi
oncolortelevisioncolortelevision
colortelevisioncolortelevisionco
lortelevisioncolortelevisioncolo
rtelevisioncolortelevisioncolort
elevisioncolortelevisioncolortel
evisioncolortelevisioncolortelev
isioncolortelevisioncolortelevisi
oncolortelevisioncolortelevision
colortelevisioncolortelevisionco
lortelevisioncolortelevisioncolo
rtelevisioncolortelevisioncolort
elevisioncolortelevisioncolortel
evisioncolortelevisioncolortelev
isioncolortelevisioncolortelevisi
oncolortelevisioncolortelevision
colortelevisioncolortelevisionco
lortelevisioncolortelevisioncolo
rtelevisionsioncolort
elevisioncolortel
evisioolortelev
isionclevisi
oncoloron
colortelnco
lortelecolo
rtelevort
elevtel
e rort
USER’S
GUIDE
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
Setup and connections .......................................................... 3
Step 1: Unpack the TV...................................................................... 4
Step 2: Connect your TV .................................................................. 4
Step 3: Connect the G-LINK Cable ................................................... 9
Step 4: Plug in the TV..................................................................... 10
Step 5: Place Batteries in Remote.................................................. 10
Step 6: Turn on the TV ................................................................... 10
On-Screen Program Guide....................................................... 10
Step 7: Program the TV .................................................................. 10
Interactive Setup .................................................................... 11
Using Point and Select ................................................................... 12
Entering Setup................................................................................ 12
Select a Language .......................................................................... 13
Auto Channel Search ..................................................................... 13
The GUIDE Plus+ Gold System ....................................................... 14
Setting Up the GUIDE Plus+ Gold System............................... 14
Setting the Time ............................................................................. 16
Setting the VCR1 Channel (auto tuning) ..................................... 16
Setting the VCR2 Channel (auto tuning) ...................................... 17
Setting the DVD Channel (auto tuning) ....................................... 18
Setting the SAT/CABLE Channel (auto tuning) ............................. 19
Labeling the Channels ................................................................... 20
Using the remote..................................................................... 21
Remote Buttons.............................................................................. 22
Accessing the Video Input ...................................................... 23
Programming the Remote ............................................................. 23
Testing the Remote.................................................................. 24
Using Automatic Code Search................................................. 24
Using the Remote to Control a Device ................................... 25
Modes of Operation ................................................................ 25
Front Panel ..................................................................................... 25
1
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
Features and Menus ............................................................... 27
Menus and Control Panels ............................................................. 28
Menus ....................................................................................... 28
Control Panels .......................................................................... 29
Audio Menu.................................................................................... 30
Using the Remote to Select an Audio Processor .......................... 31
Picture Quality Menu ..................................................................... 32
Screen Menu ................................................................................... 33
Using Closed Captioning ......................................................... 34
Channel Menu ................................................................................ 35
Time Menu ...................................................................................... 36
Parental Controls and V-Chip ........................................................ 37
V-Chip TV Rating Limit ............................................................ 38
Channel Block .......................................................................... 43
Front Panel Block ..................................................................... 43
Lock/Unlock Parental Controls ................................................ 43
GUIDE Plus+ Gold System .............................................................. 44
Downloading Data .................................................................. 45
News ......................................................................................... 48
Schedule ................................................................................... 48
Messages .................................................................................. 49
Editor ........................................................................................ 50
Setup......................................................................................... 50
PIP (Picture-in-Picture) Operation ................................................. 51
Setup Menu .................................................................................... 52
Channel Marker.............................................................................. 52
Reference..................................................................................... 53
Troubleshooting ............................................................................. 53
Care and Cleaning .......................................................................... 55
RCA DIRECT VIEW TV (5”-36”) LIMITED WARRANTY................... 56
Index ............................................................................................... 61
2
Download from Www.Somanuals.com. All Manuals Search And Download.
Setup and Connections
Getting started
This manual is designed to get you started quickly.
The first four sections of the manual show you how
to get your TV Setup and Connected, run the
Interactive Setup, Program the Remote, and use all of
the Features and Menus of your TV.
Setup and Connections
Setup and connections
1
The Reference section in the back of the book
contains troubleshooting tips, care and cleaning
instructions, accessory ordering information and your
warranty.
Interactive setup
2
3
4
Using the remote
Features and Menus
Reference
5
Check out the notes that have been added
throughout the manual in these Tip
Boxes. There are some important
tips that will help you get the most from
your TV.
3
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Setup and Connections
Step 1: Unpack the TV
Important Stand Information
Direct View TVs: 27”- 36” diagonal
Make sure to locate the remote control.
CAUTION: Choose the location for your TV
carefully. Take precautions that the stand
or other furniture the TV is placed on is
properly located (see Important
Safeguards sheet) and of adequate size
and strength to prevent the TV from
accidentally being tipped over, pushed off,
or pulled off. This could cause damage to
the TV and/or personal injury.
Step 2: Connect your TV
There are three types of connections outlined in this section:
TV Only:
If you’re only going to connect the
TV to your home antenna or cable
system.
The Basic Connection:
Advanced Connections:
If you’re going to connect the TV to a
VCR or satellite receiver.
If you’re going to make multiple
connections, hooking up the TV to
one or two VCRs, DVD player, and a
satellite receiver.
Before You Connect
Protect against power surges:
• Connect all components before
plugging any power cords into the wall
outlet.
Cable information and illustrations are given for each type of connection.
Once you have completed your desired connection you may skip forward
to Step 3.
• Turn off the TV and/or component
before connecting or disconnecting any
cables.
• Make sure all antennas and cables are
properly grounded. Refer to the Safety
Tips sheet packed with your TV.
TV Only
This is a basic connection from an antenna or cable system to your TV.
Connect the cable into the Cable/Antenna jack as shown.
Cables
You will use the following cable to make your connection:
Coaxial Cable: These cables carry audio and video
signal to the TV from an antenna, cable, or
cable box.
CABLE, CABLE BOX, OR ANTENNA
TV
G-LINK
R
L
PR
PB
Y
Once you have completed this connection go to “Step 3:
Connect the G-LINK Cable” on page 9.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Setup and Connections
The Basic Connection
The basic connection below (TV and VCR) is the most common
connection and is therefore used to illustrate a single component
connection with your TV. For better sound and picture quality and
multiple component connection information refer to the next section,
Advanced Connections.
Cables
You will use the following cable to make your
connection:
Coaxial Cables: These cables carry both the audio and video signal to
the TV from an antenna, cable, or cable box. In this connection, a second
Coaxial Cable carries the signal through the VCR to the TV.
FROM CABLE, CABLE BOX, OR ANTENNA
VCR 1
IN FROM ANT
CH3
OUT
CH4
OUT TO TV
VIDEO
AUDIO
TV
How to View the VCR
To watch the VCR in this connection tune TV to
Channel 3 or 4.
G-LINK
R
L
P
B
P
R
Y
Later, in the Interactive Setup section you will
program the TV to automatically tune to Channel 3 or
4 when you turn on the VCR.
Once you have completed this connection go to “Step 3:
Connect the G-LINK Cable” on page 9.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Setup and Connections
Advanced Connections
Once you have made your connections
you will want to program the TV to tune
to the correct Video INPUT channel in
order to see and hear audio and video
from the component. You will program
this later in the Interactive Setup.
Advanced connections give you better sound and video by separating
the audio and video signals and enable you to connect multiple
components.
This section describes the types of inputs available on the back of your
TV and suggests ways you can use them for optimum performance.
Back of the TV
The diagram below describes each of the back panel jacks. When
connecting A/V cables, be sure to connect corresponding OUTPUTS and
INPUTS (Video to Video, Right Audio to Right Audio, etc.).
Input 2 (VIDEO or Y PB PR)
Connect any of the following components to INPUT 2:
• VCR
• Internet Access Device
• Laserdisc Player
• Satellite Receiver
• DVD Player
The Y, PB, PR jacks are used in place of the VIDEO jack to connect
an optional component video source, such as a DVD player. Unlike
a single video input, the Y, PB, PR jacks maintain the video signal as
three separate signals through these three jacks. To ensure
maximum picture quality, use three video-grade cables for the
Y, PB, and PR connections.
Input 1
Connect any of the following components:
• VCR
• Laserdisc Player
• Satellite Receiver
• Internet Access Device
• DVD Player
To View the component connected to Input 2:
Use the WHO•INPUT button on the remote.
To view the component connected to Input 1:
Use the WHO•INPUT button on the remote.
S-Video
G-LINK
G-LINK
L
R
This optional
connection can be
used for better
video quality
picture.
Connect the G-LINK
PB
PR
Y
cable for one-button
recording and
channel tuning from
the Guide.
Cable/Antenna
Audio Outputs
Takes the signal input from a cable,
cable box, or an off-air antenna. Can
also be used for basic component
connections.
Connect to an audio receiver
or amplifier for variable
controlled or fixed level
stereo output.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Setup and Connections
Sample Connections
Cautions:
The following are sample connection scenarios which you may encounter
when connecting components to your TV.
Position cables to Avoid Audio Hum
or Interference
• Insert all cables firmly into jacks.
Cables
• Place the audio/video cables to the
sides of the TV’s back panel instead of
straight down the middle.
You will use the following cable to make your connection:
Coaxial Cables: Carries the signal from the
antenna or cable directly to the television or
through a cable box, as needed by your cable
system.
• Try not to coil any twin-lead cables and
keep them away from the audio/video
cables.
Protect your components from
Overheating
Audio/Video Cables: Carries sound and video
from the component to the TV.
• Do not block ventilation holes in any of
the components. Arrange the
components so that air can circulate
freely.
S-Video Cable: Carries video from an S-Video
capable component which provides best
picture quality.
• Do not stack components.
• Allow adequate ventilation when
placing your components in a stand.
TV and Stereo VCR
• Place an amplifier on the top shelf of
the stand so heated air rising from it
will not flow around other
components.
CABLE, CABLE BOX, OR ANTENNA
VCR
IN FROM ANT
CH3
IN
CH4
VIDEO
R
AUDIO
L
OUT TO TV
How to View Your VCR
OUT
To watch the VCR in this connection, press TV to put the
remote control into TV mode, then press WHO•INPUT to
scroll through the video input channels until you tune to
VID1 input.
TV
In the Interactive Setup section you can program the TV to
automatically tune to the VID1 input channel when you
press VCR1 on the remote.
G-LINK
R
L
P
B
P
R
Y
Most Audio/Video cables are combined
into one cable with three heads on
each end.
We show individual cables
Video (yellow)
in these sample
Once you have completed this connection go to “Step 3:
Connect the G-LINK Cable” on page 9.
connections. Either
Right Audio (red)
may be used, but
you must be sure to
Left Audio (white)
connect Video to
Video, Right to Right
and Left to Left.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Setup and Connections
TV, VCR and Satellite Receiver
CABLE, CABLE BOX, OR ANTENNA
SATELLITE
SATELLITE RECEIVER
IN FROM ANT
OUT
How to View Your Components
OUT TO TV
SATELLITE
IN
S-VIDEO VIDEO
R
L
To watch the Satellite Receiver in this connection, press
TV to put the remote control into TV mode, then press
WHO•INPUT to scroll through the video input channels
until you tune to VID1 (or SVID 1) input.
VCR
IN FROM ANT
OUT TO TV
IN
CH3
CH4
AUDIO
VIDEO
R
L
OUT
To watch the VCR in this connection, press TV to put the
remote control into TV mode, then press WHO•INPUT to
scroll through the video input channels until you tune
to VID2 (or COMP2 if connected to Y, PB, PR ) input.
TV
In the Interactive Setup you can program the TV to
automatically tune to the correct input channel when
you press the component button on the remote.
G-LINK
R
L
P
R
P
B
Y
Once you have completed this connection go to “Step 3:
Connect the G-LINK Cable” on page 9.
TV, VCR, Satellite Receiver and DVD
CABLE, CABLE BOX, OR ANTENNA
SATELLITE
SATELLITE RECEIVER
IN FROM ANT
OUT
OUT TO TV
SATELLITE
How to View Your Components
IN
S-VIDEO VIDEO
R
L
To watch the Satellite Receiver in this connection, press
TV to put the remote control into TV mode, then press
WHO•INPUT to scroll through the video input channels
until you tune to VID1 (or SVID 1) input.
VCR
IN FROM ANT
OUT TO TV
CH3
CH4
IN
AUDIO
VIDEO
OUT
L
R
To watch the VCR in this connection tune to Channel 3
or 4.
DVD PLAYER
OUT
R
L
S-VIDEO
VIDEO
To watch the DVD player in this connection, press TV to
put the remote control into TV mode, then press
WHO•INPUT to scroll through the video input channels
until you tune to VID2 (or COMP2 if connected to
Y, PB, PR ) input.
TV
G-LINK
R
L
In the Interactive Setup you can program the TV to
automatically tune to the correct input channel when
you press the component button on the remote.
PR
PB
Y
Once you have completed this connection go to “Step 3:
Connect the G-LINK Cable” on page 9.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Setup and Connections
Step 3: Connect the G-LINK Cable
The G-LINK cable enables the GUIDE Plus+ Gold System (the on-screen
guide that lists what shows are on TV) to work with your VCR and/or
cable box.
Cable Box – If your TV is connected to a cable box and you don’t
connect the G-LINK cable, no channels will be listed in the on-screen
program guide.
VCR – If your TV is connected to a VCR and you don’t connect the G-LINK
cable, one-touch recording won’t work. The other features of the guide
will work properly.
The G-LINK cable is used to send commands to
your VCR and/or cable box. You must remove the
DEMO PIN before you can connect the G-LINK
cable.
How to Find the Remote Control Sensor
You have to place the G-LINK wands in front of the remote control
sensor on the VCR and/or cable box. Some cable boxes and VCRs have
the remote control sensor labeled on the unit. If the remote sensor isn’t
labeled on your VCR and/or cable box, you need to use the remote
control that came with the VCR and/or cable box to locate the sensor.
1. Turn off the VCR and/or cable box.
2. Hold the remote control (not the one that came with your TV, but
the one that came with the cable box and/or VCR to which you’re
connecting the G-LINK cable) so it is touching the front of the
component.
3. Slowly move the remote control across the front of the component
(VCR or cable box) while you press the power button on and off.
You must press and release the power button each time you move
the remote (holding down the button won’t work).
Cable Box
VCR
CHANNEL
03
Placing the Wands Under the
VCR and/or Cable Box
Place the wands of the G-LINK cable
underneath your VCR and/or cable box.
Place them about one inch away from the
remote control sensor.
4. When the component turns on, you’ve located the remote control
sensor.
5. Place the wands of the G-LINK cable underneath your VCR and/or
cable box (see instructions on right).
VCR
CHANNEL
SENSOR
SENSOR
03
If you don't have a VCR, just coil
the cable of the extra G-LINK
wand with a twist tie and leave
it behind the TV.
If you don't have a cable box, just coil the
cable of the extra G-LINK wand with a
twist tie and leave it behind the TV.
Connect to G-LINK jack
on the back of the TV.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Setup and Connections
Step 4: Plug in the TV
Plug the end into the wall outlet, matching the wide blade of the plug
with the wide slot in the outlet. Be sure to insert the plug completely.
Step 5: Place Batteries in Remote
•
•
•
Remove the battery compartment cover from the back of the
remote.
Insert fresh batteries. Make sure that the polarities (+ and -) are
aligned correctly.
Replace the cover.
Step 6: Turn on the TV
Press TV on the remote, or press POWER on the TV itself.
Pressing the TV button not only turns on the TV, but puts the remote
into TV mode, so that the buttons on the remote will control TV
functions.
ON OFF
VCR1
TV
TV
DVD VCR2 AUX SAT•CABLE
MUTE
SKIP
On-Screen Program Guide
The TV is designed to bring up the GUIDE Plus+ Gold on-screen program
guide when you use the TV button on the remote to turn on the TV
(after you have set up the GUIDE Plus+ Gold System). For more
information, see “GUIDE Plus+ Gold System” on page 44.
SOUND
GUIDE
GO BACK
INFO
OK
MENU
CLEAR
To get out of the Guide:
•
Press OK to exit the Guide and tune to the highlighted channel.
•
Press GUIDE to exit the Guide and tune to the channel displayed in
the View window.
•
Press CLEAR to exit the Guide and go to the last channel you were
watching.
Step 7: Program the TV
Proceed to the next section, Interactive Setup. The interactive setup
routine walks you through the steps needed to fully configure the TV.
The first steps ask you to select your preferred language for the menu
system and to begin the auto channel search, which puts available cable
TV or antenna signals into the TV’s memory.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Interactive Setup
There’s an on-screen setup routine
Setup and connections
1
The interactive setup routine takes you through the steps
needed to configure the TV:
•
•
•
•
•
•
•
•
•
Select a menu language
Search for available channels
Set up the GUIDE Plus+ Gold System
Set the time
Interactive Setup
2
3
4
Set the VCR1 channel
Set the VCR2 channel
Using the remote
Set the DVD channel
Set the SAT/CABLE channel
Make the channel list and labels
Features and Menus
Reference
5
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Interactive Setup
Using Point and Select
You only need to know one rule when using the remote to access on-
screen menus and control panels: point and select. The point and select
method has two steps.
1. Point to a menu item using the MOVE arrows on the remote.
To point up or down, press the up or down arrows. To point left or
right, press the left or right arrows.
2. Select a menu item by pressing MENU or OK.
Selecting an item tells the TV’s menu system to go ahead and make
OK
the change or go to a place you have indicated.
MENU
CLEAR
Entering Setup
The first screen of the Interactive Setup appears automatically when
you turn on your TV for the first time or after a power outage.
Point and Select buttons
1. Press MENU to begin setup or CLEAR to exit.
SETUP
When first used or after a power
outage, your television needs
to be set up.
Would you like to begin now?
Press MENU to begin setup or
Press CLEAR to exit.
You can also access the Interactive Setup through the Main menu:
1. Press MENU to bring up the Main menu.
TV MAIN MENU
1 Audio
2 Picture Quality
3 Screen
4 Channel
5 Time
6 Parental Controls
7 GUIDE Plus+ Menu
8 Setup
0 Exit
You can also select a menu item by
entering the item number with the
number buttons on the remote.
2. Point to Setup and press MENU or OK. The first Setup screen comes
up, asking you to confirm that you want to begin.
Press CLEAR at any time to remove all
displays from the screen and return to TV
viewing.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Interactive Setup
SETUP
Would you like to begin Setup
now?
1 Begin setup now
2 Cancel setup
3. Point to Begin setup now and press MENU or OK.
Select a Language
The first part of the setup routine asks you to select your preferred
language for the menu system.
SETUP
Select the language to be used
in these menus.
1 English
2 Español
3 Français
1. Point to your preferred language for the menu system.
2. Press MENU or OK to select that language.
Auto Channel Search
The next part of the setup routine asks you if you want the TV to search
automatically for all channels available through your antenna or cable
TV system. This is sometimes called “autoprogramming.”
SETUP
Would you like the TV to search
for all available channels?
1 Search for channels
2 Skip this step
If you skip Auto Channel Search now, you
can access it later through the Channel
menu. You can also put channels in
memory manually using List & Labels. See
Features and Menus for more details.
1. Press MENU or OK to tell the TV to begin searching for channels.
The display gives you a progress report and tells you when it has
finished.
2. Press MENU or OK to continue.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Interactive Setup
You can set up the GUIDE
Plus+ Gold System during
the Interactive Setup. You
can also access the GUIDE
Plus+ menus by pressing
menu on the remote, and
selecting GUIDE Plus+ Menu.
The GUIDE PLUS+ Gold System
The next step lets you set up the GUIDE Plus+ Gold System to display your local
program listings, and control your cable box and VCR.
You can either press MENU or OK to bring up the GUIDE Plus+ Gold initial menu or
point to Skip this Step to move to the next step in the Interactive Setup.
SETUP
This TV has GUIDE Plus+, the
new on-screen program guide
with one-button VCR recording.
1 Set up GUIDE Plus+
2 Skip this step
Setting Up the GUIDE PLUS+ Gold System
To complete the GUIDE Plus+ Gold setup, the G-LINK wands must be properly aligned with your cable box and
VCR if you have them. Refer to the Setup and Connections section for additional information.
Select your Country and enter your ZIP or
Postal code.
The next series of screens asks you about
your cable TV setup. If you have a cable
box, you need to set the GUIDE Plus+ Gold
System to control it. Otherwise, it may not
be able to locate and download program
information.
Tune your cable box to Channel 2 and then
select the brand of your cable box from
the choices available. The system then
searches for the correct code to control
your cable box. When your cable box
switches to channel 9, it has located the
correct code.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Interactive Setup
Select Yes if the cable box changed to channel 9, or No if it did not. If you select No, the system will try another code.
If the GUIDE Plus+ Gold System cannot recognize either your cable box or VCR after several tries, a screen stating “Cable
Box (VCR) test failed...” Please consult your manual and try again” appears. You have a choice to either Try Again or Skip
Cable Box Setup. If you get this message, you should also:
•
•
Double check the brand of your cable box or VCR, and try entering it again.
Check to make sure the G-LINK wands are positioned correctly.
If you choose to skip the cable box (or VCR) setup some features of the guide may not be available until you successfully
complete this procedure.
Once the correct model of cable box has
been identified, you need to set the cable
box’s output channel. Enter the channel
you use to view channels through your
cable box—usually 3 or 4. Consult your
cable box’s instruction book or your cable
company if you are not sure. Choose 0 to
use VIDEO INPUT.
Select YES if you have a VCR, or NO if not.
(Answering NO automatically skips forward
to the end of GUIDE Plus+ Gold setup.)
Tune your VCR to channel 2 and turn it off.
Enter the brand of your VCR.
When the GUIDE Plus+ Gold System correctly
identifies the correct code for your VCR, the
VCR’s tuner changes to channel 9.
Select YES if the VCR automatically changed
to channel 9, or NO if it did not.
If you select NO, the system will try
another code.
The last screen that comes up after you’ve successfully finished the GUIDE
Plus+ Gold setup gives you an opportunity to view a demo. If you don’t
want to view the demo, highlight EXIT and press OK.
Remember:
•
•
Leave your cable box turned ON to download program information.
Leave your VCR turned OFF to record programs and download program
information.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Interactive Setup
Setting the Time
The next step in the Interactive Setup lets you set the time of day. If your
GUIDE Plus+ Gold System has not completed its first download, you need
to set the time.
Once the system has completed its first download, it sets the time for
you automatically and you may not see this screen.
SETUP
Would you like to set the time
on the TV?
1 Set time
2 Skip this step
1. Press MENU or OK to bring up the SET TIME control panel.
SET TIME
:
AM
Enter01to12forthehour.
Press MENU to exit.
2. Use the left and right arrows to point to the hour and minutes
spaces. Use the digits to enter the numbers and the up and down
arrows to change from AM to PM.
3. Press MENU or OK to continue.
Setting the VCR1 Channel (auto
tuning)
The next step lets you set the VCR1 channel. When you set the VCR1
channel, you’re telling the TV what channel to tune to when you press
the VCR1 button on the remote. This is called auto tuning.
Indicate which input you used to connect the VCR. If you don’t have a
VCR1 component connected to the TV, skip this step or select Not
Connected from the VCR1 Channel choice list. (For more, see Auto
Tuning in the Features and Menus section.)
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Interactive Setup
SETUP
Would you like to use a VCR
with your TV?
1 Use TV with a VCR
2 Skip this step
1. Press MENU or OK to bring up the VCR1 choice list.
SET VCR1 CHANNEL
1 Not connected
2 Channel 3
3 Channel 4
4 Video 1 Input
5 Video 2 Input
2. Point to the choice that matches the way you have your VCR
connected to the TV. If you used audio/video cables, choose the
video input you connected the cables to.
3. Press MENU or OK to continue.
Setting the VCR2 Channel (auto
tuning)
The next step lets you set the VCR2 channel. When you set the VCR2
channel, you’re telling the TV what channel to tune to when you press
the VCR2 button on the remote.
Indicate which input you used to connect a second VCR. If you don’t
have a second VCR component connected to the TV, skip this step or
select Not Connected from the VCR2 Channel choice list. (For more, see
Auto Tuning in the Features and Menus section.)
SETUP
Would you like to use a second
VCR with your TV?
1 Use TV with VCR 2
2 Skip this step
1. Press MENU or OK to bring up the VCR2 choice list.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Interactive Setup
SET VCR2 CHANNEL
1 Not connected
2 Channel 3
3 Channel 4
4 Video 1 Input
5 Video 2 Input
2. Point to the choice that matches the way you have your second VCR
connected to the TV. If you used audio/video cables, choose the
video input you connected the cables to.
3. Press MENU or OK to continue.
Setting the DVD Channel (auto
tuning)
The next step lets you set the DVD channel. When you set the DVD
channel, you’re telling the TV what channel to tune to when you press
the DVD button on the remote.
Indicate which input you used to connect a DVD player. If you don’t
have a DVD player connected to the TV, skip this step or select Not
Connected from the DVD Channel choice list. (For more, see Auto
Tuning in the Features and Menus section.)
SETUP
Would you like to use a DVD
with your TV?
1 Use TV with DVD
2 Skip this step
1. Press MENU or OK to bring up the DVD choice list.
SET DVD CHANNEL
1 Not connected
2 Channel 3
3 Channel 4
4 Video 1 Input
5 Video 2 Input
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Interactive Setup
2. Point to the choice that matches the way you have your DVD player
connected to the TV. If you used audio/video cables, choose the
video input you connected the cables to.
3. Press MENU or OK to continue.
Setting the SAT/CABLE Channel
(auto tuning)
The next step lets you set the SAT/CABLE channel. When you set the SAT/
CABLE channel, you’re telling the TV what channel to tune to when you
press the SAT•CABLE button on the remote.
Indicate which input you used to connect a satellite receiver or a cable
box. If you don’t have a satellite receiver or cable box connected to the
TV, skip this step or select Not Connected from the SAT/CABLE Channel
choice list. (For more, see Auto Tuning in the Features and Menus
section.)
SETUP
Would you like to use a cable
box or satellite unit with your
TV?
1 Use with cable or satellite
2Skip this step
1. Press MENU or OK to bring up the SAT/CABLE choice list.
SET SAT/CABLE CHANNEL
1 Not connected
2 Channel 2
3 Channel 3
4 Channel 4
5 Video 1 Input
6 Video 2 Input
If You Have Both a Satellite
Receiver and a Cable Box
Connected to the TV
The remote cannot control both a cable
box and the satellite receiver. If you
choose to have the remote control the
satellite receiver, you must then use your
cable box remote to control the cable box.
You may, however, prefer to use the
satellite receiver remote for satellite
programming, and set your SAT•CABLE
button to control your cable box. It’s your
choice.
2. Point to the choice that matches the way you have your satellite
receiver or cable box connected to the TV. If you used audio/video
cables, choose the video input you connected the cables to.
3. Press MENU or OK to continue.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Interactive Setup
Labeling the Channels
Use the CH ^ (channel up) or CH v
(channel down) buttons to change
channels in the Channel # field. This
works even if you’re not in the Channel #
field. Or, enter the channel number
directly using the number buttons on the
universal remote. To enter a number
greater than 99, press and hold “1” to
enter the hundreds digit, then press the
two remaining numbers.
This last step in the Interactive Setup lets you edit your channel list and
label your channels. (For more, see List and Labels in the Features and
Menus section.)
SETUP
Would you like to name each
channel?
1 Name channels
2 Skip this step
The List and Labels feature can also be
accessed from the Channel menu. Because
this procedure can be time consuming,
feel free to skip this step and come back
to it later.
1. Press MENU or OK to bring up the List and Labels control panel.
LIST AND LABELS
Channel
#
59
Normal
List
Yes
Channel
Label
------
Use or , keypad, or CH ^/v
to set channel, MENU to exit.
2. Use the left and right arrows to point to the three different areas of
the control panel (called “fields”).
3. Use the up and down arrows to scroll through the numbers in the
Channel # field, letters in the Channel Label field, and select Yes or
No in the Normal List field. You may wish to refer to the call letters
listed in your newspaper’s TV section for ideas on labeling the
channels.
4. Repeat this process for each of your channels. Then press MENU or
OK to continue. The TV can store up to 27 labels in memory.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Remote
How to use your Universal Remote
Setup and connections
Interactive setup
1
This section defines the buttons of the remote and
how to program it to control other components.
The universal remote can be programmed to control
most brands of remote controllable VCRs, satellite
receivers, and cable boxes. If you have an RCA, GE
or Proscan component, you probably don’t need to
program it at all.
2
Using the remote
3
Features and Menus
Reference
4
5
Modes of Operation
Because this universal remote can control
several different components (DVD player,
VCR, Cable Box, etc.) it uses operational
modes triggered by the component
buttons. For example if you want the
remote to control the TV, you would press
the TV button to put the remote into TV
mode before you could control the TV.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Remote
Remote Buttons
ON•OFF When in TV mode, turns TV on and off. If in another device
mode (VCR, DVD, Satellite, etc.) and programmed, will turn the device
on and off. When pressed twice within two seconds all devices that are
on will be turned off (this feature only works with most RCA, GE and
Proscan products).
LED
ON OFF
VCR1
TV
VCR1 Puts the remote in VCR mode and if auto tuning is enabled, it will
turn on the TV and tune to the correct channel.
DVD VCR2 AUX SAT•CABLE
TV Turns on the TV and puts the remote in TV mode. Also displays
channel information.
MUTE
SKIP
DVD Puts the remote in DVD mode and if auto tuning is enabled, it will
turn on the TV and tune to the correct channel.
VCR2 Puts the remote in VCR2 mode and if auto tuning is enabled, it
will turn on the TV and tune to the correct channel.
LED Red light which indicates programming mode when programming
the remote.
SOUND
GUIDE
GO BACK
INFO
AUX Puts the remote in AUX mode. Also turns on the TV, if auto tune is
enabled.
OK
SAT•CABLE Puts the remote in SAT•CABLE mode and if auto tuning is
enabled, it will turn on the TV and tune to the correct channel.
MENU
CLEAR
MUTE Reduces the TV’s volume to its minimum level. Press again to
restore the volume.
SKIP Press once before changing channels and the TV will wait 30
seconds before returning you to the original channel. Press repeatedly
to add more time.
ANTENNA
WHO•INPUT
CH ^ or CH v Scans up or down through the current channel list. Press
once to change the channel up or down; press and hold to continue
changing channels.
REVERSE PLAY FORWARD
VOL – or VOL + Decreases or increases the TV’s volume.
REC•VCR+
STOP PAUSE
SOUND Press once to display the audio processor choice list. Point and
select to choose a different processor or press CLEAR to exit.
SWAPCH CTRL RESET
PIP
GO BACK Returns you to the previous channel.
GUIDE Brings up GUIDE Plus+ Gold System and exits the Guide.
INFO Press to get more information about a program, channel, or
advertisement.
MOVE (Arrows) Used to point to different items in the menu system.
Also used to adjust the menu controls. Also move the PIP window when
no menus are on the screen.
OK When in the menu system, selects highlighted items or returns you
to the previous menu.
MENU Brings up the Main menu and selects highlighted items. When in
VCR mode, it functions as a PROGRAM button.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Remote
CLEAR Removes any menu or display from the screen and returns you
to TV viewing. Will also exit the Guide system.
(0-9) Number Buttons Enters channel numbers and time settings
directly though the remote control. To enter a two-digit channel, press
the two digits. To enter a three-digit channel, press and hold the first
digit until #-- appears, then add the second two. Example: to tune to
channel 123, press and hold 1 until 1-- appears then press 2 and 3.
WHO•INPUT In TV mode, press to toggle through the available input
sources VID1/SVID1, VID2/COMP2, FRNT (front panel jacks), and previous
channel. In SAT mode, press to select available channel lists.
ANTENNA Functions as TV/VCR button in VCR mode and TV/receiver
button in SAT•CABLE mode.
REVERSE, PLAY, FORWARD, REC•VCR+, STOP, PAUSE If programmed,
provides transport control for some remote-controllable VCRs, DVD
players, laserdisc players, tape decks, and CD players. Pressing REC•VCR+
when using the GUIDE Plus+ Gold System sets the VCR to record a
program.
PIP (Picture-In-Picture) Brings up the small picture-in-picture window.
Press again to remove the PIP window. When PIP Caption Display -
Alternate with PIP - has been selected, will toggle between PIP on, PIP
on with closed captions, and PIP off.
SWAP Swaps the main picture with the PIP window.
CH CTRL Selects the picture window, (that is, the main or PIP window)
to be changed by the CH ^ (channel up) or CH v (channel down) buttons.
RESET Resets picture quality controls to the Bright Lighting Picture
Control Preset. Point and select to choose a different Picture Control
Preset.
Accessing the Video Input
Use the WHO•INPUT button to scroll through the available input
channels (VID1/SVID, VID2/COMP2, FRNT and previous channel) and view
components you have connected to the TV.
1. Press TV to place the remote in TV mode. Make sure that the
component you want to view is turned ON.
2. Press WHO•INPUT to tune to an available input channel.
Modes of Operation
3. Continue to press the WHO•INPUT button to scroll through the
channels.
Because this universal remote can control
several different components (DVD
player, VCR, Cable Box, etc.) it uses
operational modes triggered by the
component buttons. For example if you
want the remote to control the TV, you
would press the TV button to put the
remote into TV mode before you could
control the TV.
Programming the Remote
The universal remote can be programmed to control most brands of
remote controllable VCRs, satellite receivers and cable boxes. The
remote is already programmed to control most RCA, GE and Proscan TVs,
VCRs, DVD players, laserdisc players and satellite receivers.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Remote
Testing the Remote
To determine whether the universal remote needs to be programmed,
turn a device ON, such as a VCR, point the remote at the VCR, and press
the VCR1 button. Then press POWER or CH ^ (channel up) or CH v
(channel down) to see if the VCR responds to the remote commands. If
not, the remote needs to be programmed.
Using Automatic Code Search
The following instructions can be used to program the remote to
control each of the devices connected to your TV. If you want to exit the
automatic code search without programming any of your devices, press
CLEAR until the LED turns off.
LED
1. Turn on the device you want to control (VCR, SAT, etc.)
2. Point the remote at the device to be controlled. Press and hold the
button you want to program (VCR1, VCR2, etc.). While holding the
device button, press and hold ON•OFF until the red light on the
remote turns on, then release both buttons. For the AUX button,
using code search will not work. You must use direct entry.
VCR1
DVD
ON/OFF
TV
VCR2
AUX SAT•CABLE
CH+
3. Press and release PLAY, then wait 5 seconds or until the LED stops
flashing.
At this point the remote is searching for the correct code to
program. If, after 5 seconds, the device you want to control does
not turn off, press PLAY again to tell the remote to search the next
set of codes.
CH-
Continue pressing PLAY until the device turns off or you have
searched through all of the codes. There are 20 total sets of codes.
If the device does not turn off after pressing PLAY 20 times, then
the remote cannot control that particular device.
If the device you want to control does turn off:
1. Press and release REVERSE, then wait 2 seconds. Repeat this step
until the device turns back ON.
REVERSE
PLAY
2. To finish, press and hold STOP until the red light on the remote
turns off.
STOP
Using Direct Entry
You’ll use these buttons when you program
the remote to control any device.
1. Turn on the component to be programmed.
The remote may not operate all models of
all brands.
2. Look up the brand and code number(s) for the component on the
code list on the last page of this section, Using the Remote.
3. Press and hold the button on the remote you want to program.
4. Enter the code from the code list.
5. Release button, and then press ON•OFF to see if the component
responds to the remote commands. If it doesn’t, try pressing the
component button and then ON•OFF again.
6. If you get no response, repeat these steps using the next code listed
for your brand, until the component responds to the remote
commands.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Remote
Using the Remote to Control a Device
Once the remote has been programmed successfully, you are ready to
use it to control your devices.
To operate the device:
1. Press the device button (TV, VCR1, VCR2, AUX, or SAT•CABLE) to set
the remote to control the device.
2. Press ON•OFF to turn the device ON or OFF.
3. Use the remote buttons that apply to that device.
Modes of Operation
Because this universal remote can control several different components
(VCR, Cable Box, etc.) it uses operational modes triggered by the
component buttons. For example if you want the remote to control the
TV, you would press the TV button to put the remote into TV mode
before you could control the TV.
Front Panel
If you cannot locate your remote you can use the front panel of your TV
to operate many of the TV’s features.
MENU Brings up the Main menu. When in the menu system, it selects
highlighted items. Also returns you to the previous menu.
CH v Scans down through the current channel list. In the menu system,
it points down to items and adjusts menu controls.
CH ^ Scans up through the channel list. In the menu system, it points
up to items and adjusts menu controls.
VOL – Decreases the volume. When in the menu system, VOL – is used
to point left to items and adjust menu controls.
VOL + Increases the volume. When in the menu system, VOL + is used
to point right to items and adjust menu controls.
POWER Turns the TV on and off.
Front Panel Jacks
VIDEO L/MONO
R
You can access the component you connected by pressing the INPUT
button on your remote until FRNT appears on the screen.
VIDEO (in) Allows you to connect a component such as a VCR,
camcorder or Internet access device.
L/MONO (left audio) and R (right audio) Receives audio signals
from another component such as a VCR, camcorder or Internet access
device.
The Front Panel Block feature disables all
front panel buttons. For more
information, see “Parental Controls,” in
the Features and Menus section.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Remote
MontgomeryWard ............................................ 2075, 2131
Cable Boxes
VCR
Motorola.............................................................. 2021,2131
MTC .......................................................... 2002, 2013, 2026
Multitech ................. 2002, 2013, 2016, 2026, 2053, 2061
NEC .................................... 2009, 2010, 2011, 2016, 2018,
....................... 2058, 2064, 2076, 2078, 2079, 2111, 2123
Nikko............................................................................... 2014
Noblex ............................................................................ 2013
Olympus ......................................................................... 2021
Optimus ............................................................... 2014, 2131
Optonica......................................................................... 2096
Orion .............................................................................. 2035
Panasonic ................. 2021, 2022, 2109, 2125, 2126, 2127
Pentax ................................. 2016, 2055, 2056, 2107, 2120
Pentex Research ........................................................... 2018
Philco .............................................. 2021, 2022, 2062, 2063
Philips ............................................. 2021, 2062, 2096, 2124
Pilot ................................................................................. 2014
Pioneer................................ 2010, 2055, 2080, 2081, 2123
Portland ......................................... 2016, 2017, 2019, 2110
Proscan ................................................................ 2000, 2001
Protec .............................................................................. 2061
Pulsar ............................................................................... 2104
Quarter .......................................................................... 2011
Quartz............................................................................. 2011
Quasar ...................................................... 2021, 2022, 2125
RCA .................................... 2000, 2001, 2003, 2013, 2021,
.............. 2055, 2056, 2082, 2083, 2084,2085, 2086,2087,
.............. 2088, 2089, 2090, 2091, 2107, 2115, 2120, 2125
Radioshack/Realistic .................... 2002, 2011, 2013, 2014
. 2021, 2022, 2023, 2026, 2029, 2049, 2050, 2096, 2131
Radix................................................................................ 2014
Randex ............................................................................ 2014
Ricoh ............................................................................... 2128
Runco .............................................................................. 2104
Samsung ................... 2005, 2013, 2015, 2033, 2053, 2112
Sanky .................................................................... 2132, 2104
Sansui ............................................. 2010, 2092, 2111, 2123
Sanyo ......................................................... 2011, 2013, 2023
ABC ...................... 5002, 5003, 5004, 5005, 5006, 5007, 5053
Antronix ..................................................................... 5008, 5009
Archer ................................................... 5008, 5009, 5010, 5011
Cabletenna ............................................................................ 5008
Cableview .............................................................................. 5008
Century ................................................................................. 5011
Citizen .................................................................................... 5011
ColourVoice .............................................................. 5012, 5013
Comtronics ................................................................ 5014, 5015
Contec ................................................................................... 5016
Eastern ................................................................................... 5017
Garrard .................................................................................. 5011
GC Electronics ..................................................................... 5009
Gemini ............................................................. 5018, 5019, 5049
General Instrument ............................................................ 5003
Hamlin ........................................ 5020, 5021, 5022, 5035, 5045
Hitachi .................................................................................... 5003
Hytex...................................................................................... 5002
Jasco ....................................................................................... 5011
Jerrold ........ 5003, 5005, 5007,5018, 5023, 5024, 5046, 5053
Magnavox ............................................................................... 5025
Memorex ............................................................................... 5026
Movie Time ..................................................... 5002, 5027, 5028
NSC .................................................................. 5002, 5027, 5028
Oak .................................................................... 5002,5016, 5029
Panasonic .................................................................... 5048, 5052
Paragon .................................................................................. 5026
Philips ........ 5011, 5012, 5013, 5019, 5025, 5030, 5031, 5032
Pioneer........................................................................ 5033, 5034
Pulsar ...................................................................................... 5026
RCA .................................................................. 5047, 5049, 5052
Realistic ....................................................................... 5009, 5049
Regal ............................................................................ 5022, 5035
Regency ................................................................................. 5017
Rembrandt ............................................................................ 5003
Runco ..................................................................................... 5026
Samsung ...................................................................... 5014, 5034
Scientific Atlanta.................................. 5006, 5036, 5037, 5038
Signal............................................................................ 5014, 5018
Signature ................................................................................ 5003
SL Marx .................................................................................. 5014
Sprucer .................................................................................. 5052
Starcom............................................................ 5007, 5018, 5053
Stargate ....................................................................... 5014, 5018
Starquest................................................................................ 5018
Tandy ...................................................................................... 5040
Teleview ................................................................................. 5014
Tocom .............................................................. 5004, 5023, 5041
Toshiba ................................................................................... 5026
Tusa ......................................................................................... 5018
TV86 ....................................................................................... 5027
Unika ................................................................ 5008, 5009, 5011
United Artists ....................................................................... 5002
United Cable ........................................................................ 5053
Universal ............................................... 5008, 5009, 5010, 5011
Videoway ............................................................................... 5044
Viewstar ................................................ 5015, 5025, 5027, 5040
Zenith ............................................................... 5026, 5050, 5051
Admiral ......................................................................... 2131
Adventura..................................................................... 2026
Aiko ............................................................................... 2027
Aiwa.................................................................... 2002, 2026
Akai .... 2003, 2004, 2005, 2007, 2008, 2111,2112, 2113
American High ............................................................ 2021
Asha ............................................................................... 2013
Audio Dynamics .............................................. 2009, 2010
Audiovox ...................................................................... 2014
Bell & Howell............................................................... 2011
Beaumark ..................................................................... 2013
Broksonic .......................................................... 2012, 2025
Calix .............................................................................. 2014
Candle ......... 2013, 2014, 2015, 2016, 2017, 2018, 2019
Canon...................................................... 2021, 2022, 2114
Capehart............................................................ 2020, 2110
Carver ........................................................................... 2062
CCE .................................................................... 2027, 2061
Citizen2013, 2014, 2015, 2016, 2017, 2018,2019,2027
Colortyme ................................................................... 2009
Colt................................................................................ 2061
Craig ............................................. 2013, 2014, 2023, 2061
Curtis-Mathes ........................... 2000, 2002, 2009, 2013,
................................. 2016, 2018, 2021, 2022, 2024, 2115
Cybernex...................................................................... 2013
Daewoo ...... 2015, 2017, 2019,2025, 2026, 2027, 2028,
2110
Daytron ......................................................................... 2110
Dbx ..................................................................... 2009, 2010
Dimensia ....................................................................... 2000
Dynatech ........................................................... 2002, 2026
Electrohome ..................................................... 2014, 2029
Electrophonic .............................................................. 2014
Emerson ................................................. 2002, 2012,2014,
............ 2015, 2021, 2024, 2025,2026,2029, 2030, 2032,
2033, 2034, 2035, 2036, 2037, 2038, 2039, 2040, 2041,
2042, 2044, 2045, 2047, 2065, 2105, 2113, 2116, 2117,
2130
Scott ... 2012, 2015, 2025, 2032, 2035, 2038, 2065, 2093,
Fisher . 2011, 2023, 2048, 2049, 2050, 2051, 2052,2118
Fuji ...................................................................... 2021, 2119
Funai ................................................................... 2002, 2026
Garrard ......................................................................... 2026
GE ..... 2000, 2001, 2013, 2021, 2022, 2053, 2115, 2120
Goldstar............................ 2009, 2014, 2018, 2054, 2121
Gradiente ..................................................................... 2026
Harley Davidson ......................................................... 2026
Harman Kardon .......................................................... 2009
Harwood ...................................................................... 2061
Headquarter ................................................................ 2011
Hitachi2002, 2055, 2056, 2057, 2107, 2111, 2120, 2122
HI-Q .............................................................................. 2023
Instant Replay .............................................................. 2021
JCL ................................................................................. 2021
JC Penney ............. 2009, 2010, 2011, 2013, 2014, 2021,
.......... 2022, 2055, 2056, 2058, 2059, 2060, 2107, 2118
Jensen ...................................................... 2055, 2056, 2111
JVC ............... 2009, 2010, 2011, 2018, 2058, 2111, 2123
2116
Sears .................................... 2011, 2014, 2021, 2023, 2048,
......................... 2049, 2050, 2051, 2055, 2056, 2107, 2118
Sharp .............. 2002, 2017, 2029, 2094, 2095, 2096, 2131
Shintom .......................................... 2004, 2056, 2061, 2098
Shogun ............................................................................ 2013
Signature ............................................................. 2002, 2131
Singer......................................................... 2021, 2061, 2128
Sony .......................... 2002, 2004, 2098, 2099, 2119, 2128
STS ........................................................................ 2021, 2107
Sylvania 2002, 2021, 2022, 2026, 2062, 2063, 2065, 2124
Symphonic ........................................................... 2002, 2026
Tandy .................................................................... 2002, 2011
Tashiko ............................................................................ 2014
Tatung ................................................................... 2058, 2111
TEAC ................................... 2002, 2026, 2058, 2085, 2111
Technics ............................................................... 2021, 2109
Teknika ..................... 2002, 2014, 2021, 2026, 2100, 2129
Tmk ........................................................... 2013, 2024, 2047
Toshiba ........... 2015, 2049, 2051, 2055, 2065, 2093, 2116
ToteVision ........................................................... 2013, 2014
Unitech ........................................................................... 2013
Vector Research .......................... 2009, 2010, 2015, 2016
Victor .............................................................................. 2010
Video Concepts ................ 2009, 2010, 2015, 2016, 2113
Videosonic ..................................................................... 2013
Wards .......... , 2002, 2013, 2014, 2015, 2021, 2023, 2026,
Kenwood .............. 2009, 2010, 2011, 2016, 2018, 2058,
.............................................................................. 2111,2123
KLH ............................................................................... 2061
Kodak ................................................................. 2014, 2021
Lloyd ................................................................... 2002, 2026
Logik .............................................................................. 2061
LXI ................................................................................. 2014
Magnavox .... 2021, 2022, 2062, 2063, 2104, 2108, 2124
Magnin ........................................................................... 2013
Marantz .................................................. 2009, 2010, 2011,
.................................. 2016, 2018, 2021, 2058, 2062,2064
Marta ............................................................................. 2014
Masushita ...................................................................... 2021
MEI ................................................................................. 2021
Memorex .......................................................... 2002, 2011,
..................... 2013, 2014, 2021, 2023, 2026, 2104, 2131
MGA ........................................................ 2029, 2065, 2113
MGNTechnology ........................................................ 2013
Midland ......................................................................... 2053
Minolta .................................................... 2055, 2056, 2107
Mitsubishi .. 2029, 2055, 2056, 2065, 2066, 2067, 2069,
.......... 2070, 2071, 2072, 2073, 2074, 2106, 2113, 2123
Satellite Receivers
Chapparal ................................................................... 5056, 5057
Drake .......................................................................... 5058, 5059
GE ........................................................................................... 5000
General Instuments....................................... 5060, 5061, 5062
Panasonic ............................................................................... 5075
Primestar ............................................................................... 5076
Proscan .................................................................................. 5000
RCA ........................................................................................ 5000
Realistic .................................................................................. 5063
Sony ........................................................................................ 5072
STS1 ........................................................................................ 5064
STS2 ........................................................................................ 5065
STS3 ........................................................................................ 5066
STS4 ........................................................................................ 5067
Toshiba ........................................................................ 5073, 5068
Uniden.................................................................................... 5069
.. 2029, 2055, 2056, 2061, 2096, 2101, 2102, 2103, 2107,
................................................................................ 2116, 2131
XR-1000 ................................................... 2021, 2026, 2061
Yamaha ..................... 2009, 2010, 2011, 2018, 2058, 2111
Zenith .................................. 2004, 2098, 2104, 2119, 2128
Audio
(For RCA and Dimensia brands only)
AM/FM ............................................................................ 4003
Aux .................................................................................. 4004
Phono .............................................................................. 4005
CD ................................................................................... 4007
Tape ................................................................................. 4006
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Features and menus
Using the TV
Setup and connections
1
This section explores the features and menus of your TV
beginning with some information on using menus and control
panels.
Each menu is then outlined and special features are detailed in
order to help you get the most from your TV.
Interactive setup
2
This section also includes information on using your GUIDE
Plus+ Gold System.
Using the remote
3
Features and Menus
4
Reference
5
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Features and menus
Menus and Control Panels
Using the buttons on both the remote and front panel enable you to
access and make changes to the Menus and Control Panels.
Menus use the point and select rule to navigate, but control panels use a
variety of methods to adjust features on your TV. The following pages
detail how to use these controls in order to customize the functions of
your TV.
Menus
The first menu is called the Main menu. Press MENU on the remote or on
the front panel to bring up the Main menu:
MAIN MENU
1 Audio
2 Picture Quality
3 Screen
4 Channel
5 Time
6 Parental Controls
7 GUIDE Plus+ Menu
8 Setup
0 Exit
Menus take you to another menu or a control panel. There are two ways
to select a choice in a menu:
•
•
Point with the MOVE arrows and then select with MENU or OK.
Press a number button on the remote. For example, in the Main
menu press 3 to go straight to the Screen menu.
Exiting a menu
There are three ways to exit a menu:
•
•
•
Point to Exit and press MENU or OK.
Press 0 on the remote.
Press CLEAR. The on-screen displays are cleared from the screen and
you are returned to TV viewing.
Feel free to explore the menu system. If
you’re ever unsure where you are in the
menu system, or you’re just plain tired of
exploring, press CLEAR to remove the
menus from the screen and start over
again.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Features and menus
Control Panels
ON OFF
VCR1
TV
Control Panels allow you to adjust the default settings on many features
of your TV. You can choose a setting, enter a number or adjust a level
such as tint or brightness. There are three types of control panels: sliders,
choice lists and numeric entry.
DVD VCR2 AUX SAT•CABLE
MUTE
SKIP
Sliders
Sliders are used to make adjustments to a particular control.
To use a Slider in a menu:
SOUND
GUIDE
GO BACK
INFO
1. Press the up or down arrow to select the slider control for the
feature you want to adjust.
OK
Arrows
2. Press the right or left arrow to adjust the indicator line on the slider.
MENU
CLEAR
PICTURE CONTROLS
Contrast
Color
Tint
Black Level
Sharpness
Press MENU to exit.
ANTENNA
WHO•INPUT
REVERSE PLAY FORWARD
REC•VCR+ STOP PAUSE
SWAPCH CTRL RESET
PIP
Numeric Entry
A numeric entry control panel is used to enter numbers or letters.
A pointer appears underneath the column you are changing.
SET TIME
:
AM
Pointer
Enter01to12forthehour.
Press MENU to exit.
1. Press the up arrow to enter a number in the column above the
pointer.
2. Press the right arrow to move to the next column, then press the up
or down arrow to enter a number.
If the control panel is not set at the
current time, use the left arrow to go back
over the columns and the up arrow to
make changes.
3. When you have finished entering information, press MENU or OK.
You can also enter numbers directly by
using the number buttons.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Features and menus
Choice Lists
Choice lists are used to choose a particular setting from a list of settings.
1. Point to a choice on a menu and press MENU or OK to select that
choice.
CLOSED-CAPTION MODE
1 CC1
2 CC2
3 CC3
4 CC4
5 Text1
6 Text2
7 Text3
8 Text4
Now that you know how to access the menus and adjust the control
panels, the following pages provide a brief explanation of all the menu
features. The features are organized in order of their location on the
Main Menu.
Audio Menu
MAIN MENU
Mute Press OK to reduce the TV’s volume to its minimum level. Press OK
again to restore the volume.
1 Audio
2 Picture Quality
3 Screen
Tone Controls Displays the slider controls for adjusting the TV’s treble,
bass and balance.
4 C
AUDIO
5 T
1 Mute
6 P
2 Tone Controls
Audio Processor Displays a choice list of available audio modes, which
control the way the sound comes through your speakers. You can also
directly access this menu by pressing the SOUND button on your remote.
7 G
3 Audio Processor
8 S
4 Audio Output & Speakers
0 E
0 Exit
Mono Plays the sound in mono only. Use this setting when
receiving broadcasts with weak stereo signals.
Stereo Splits the incoming stereo audio signal into left and right
channels. Most TV programs and recorded materials have stereo
audio. The TV displays the word STEREO when you tune to a
program that is broadcast in stereo.
Sound Logic™ Stereo Sound Logic technology monitors a
program’s audio track and limits volume excursions to a minimum
and maximum volume range from the current volume setting.
Acting like a dynamic range, it compresses to limit sudden volume
increases, like when a commercial comes on.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Features and menus
Second Audio Program (SAP) Plays the program’s audio in a
second language, if one is available. The TV displays the word SAP
when you tune to a program that is broadcast with SAP
information. SAP audio is broadcast in mono. SAP is also used to
broadcast a program’s audio with descriptions of the video for the
visually impaired.
Audio Output & Speakers Displays a choice list that lets you turn the
TV’s internal speakers on or off and set the audio outputs to fixed-level
or variable control level.
Variable Output, Speakers On This setting turns the TV’s
speakers on and allows variable output from the TV’s audio output
jacks.
Variable Output, Speakers Off This setting turns the TV’s
speakers off and allows variable output from the TV’s audio output
jacks.
Fixed Output, Speakers Off This setting turns the TV’s speakers
off and allows fixed output from the TV’s audio output jacks to an
external device such as a surround sound amplifier. With Fixed
Output On, the TV’s volume control, tone controls and mute are
disabled.
ON OFF
VCR1
TV
DVD VCR2 AUX SAT•CABLE
Using the Remote to Select an
Audio Processor
MUTE
SKIP
You can change the audio processor from the Audio menu, as illustrated
above, or by pressing the SOUND button on the remote. To make a
selection using the remote:
Sound button
SOUND
GUIDE
GO BACK
INFO
OK
1. Press SOUND to display the audio processor choice list.
2. Point to and select a different audio processor or press CLEAR to
exit.
MENU
CLEAR
ANTENNA
WHO•INPUT
REVERSE PLAY FORWARD
REC•VCR+ STOP PAUSE
SWAPCH CTRL RESET
PIP
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Features and menus
Picture Quality Menu
MAIN MENU
1 Audio
2 Picture Quality
3 Screen
Basic Picture Controls Displays the five slider controls for adjusting
the way the picture looks.
4 Channel
PICTURE QUALITY
5
6
Contrast Adjusts the difference between the light and dark areas
of the picture.
1 Basic Picture Controls
7
2 Picture Presets
8
3 Auto Color
0
4 Color Warmth
Color Adjusts the richness of the color.
5 Video Noise Reduction
0 Exit
Tint Adjusts the balance between the red and green levels.
Black Level Adjusts the brightness of the picture.
Sharpness Adjusts the crispness of edges in the picture.
Picture Quality menu
When exiting this menu the Save Personal Picture Preset Choice List will
appear. You can choose either Yes or No.
Picture Presets Displays a choice list that lets you select one of four
preset picture settings: Bright Lighting, Normal Lighting, Soft Lighting
or Personal Picture Presets. Choose the setting that is best for your
viewing environment and edit your Personal Picture Preset.
Auto Color Displays a choice list that lets you turn on the feature that
automatically corrects the color of the picture. (This is especially useful
for tracking realistic flesh tone colors as you switch from channel to
channel.) Choose On or Off, depending on your preference. It’s your
choice.
Color Warmth Displays a choice list that lets you set one of three
automatic color adjustments: Cool for a more blue palette of picture
colors; Normal; and Warm for a more red palette of picture colors. The
warm setting corresponds to the NTSC standard of 6500ºK.
Video Noise Reduction Displays a choice list that lets you turn on the
feature that automatically reduces noise from the picture.
Press the RESET button on the remote to
bring up the Picture Control Presets choice
list. Point to the desired setting; press
MENU or OK to select it.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
Features and menus
MAIN MENU
Screen Menu
1 Audio
Closed-Caption Display Displays a choice list that lets you choose the
way closed captioning information is shown on the screen.
2 Picture Quality
3 Screen
4 Channel
SCREEN
5 T
Off No captioning information displayed.
6 P
1 Closed-Caption Display
7 G
2 Closed-Caption Mode
On Captioning information shown always, when available.
8 S
3 PIP Closed-Caption Display
0 E
4 PIP Closed-Caption Mode
On When Sound is Muted Displays captioning information, when
available, whenever the TV’s sound is muted by pressing the MUTE
button. The captioning information is not displayed when the sound
is not muted.
5 Menu Language
6 Picture Tilt
0 Exit
Closed-Caption Mode Displays a choice list that lets you choose which
captioning mode is used for displaying captioning information.
DirectViewTV: 31”- 36” Screen menu
PIP Closed-Caption Display Displays a choice list that lets you choose
the way closed captioning information is shown in the PIP window.
Off No captioning information displayed.
On Captioning information shown always, when available.
Alternate with PIP button Displays captioning information,
when available, by pressing the PIP button while the PIP window is
displayed.
PIP Closed-Caption Mode Displays a choice list that lets you choose
which captioning mode is used for displaying captioning information
within the PIP window.
Menu Language Displays a choice list that lets you select your
preferred language for the menus: English, Spanish or French.
Picture Tilt (Direct View TV: 31”- 36”) Your TV has an extra-large
picture tube, which makes it vulnerable to the effects of the Earth’s
magnetic field. You may need to adjust the picture tilt. Use the left and
right arrow buttons to adjust the picture tilt.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Features and menus
Using Closed Captioning
Many programs are encoded with closed captioning information, which
lets you display the audio portion of a program as text on the TV screen.
Closed captioning is not available on all channels at all times. Only
specific programs encoded with closed captioning information are
applicable. When a program is closed captioned, the letters CC are
displayed in the channel marker.
Closed Captioning Modes
The TV offers eight closed-captioned modes, including four text modes.
To Set the Closed-Captioning Mode:
1. Select Screen from the Main menu.
2. Point to Closed-Caption Mode and press OK. A choice list displays:
CLOSED-CAPTION MODE
1 CC1
2 CC2
3 CC3
4 CC4
5 Text1
6 Text2
7 Text3
8 Text4
3. Point to your choice and press OK to select it and return to the
Screen menu.
Turning off Closed Captioning
1. Select Screen from the Main menu.
2. Press OK to select Closed-Caption Display
3. Point to Off Always and press OK. The closed captioning is turned
off and you are returned to the Screen menu.
If you are unsure of the differences
among the modes, you may prefer to
leave the closed captioned mode set to
CC1, which displays complete text of the
program in the primary language in
your area.
34
Download from Www.Somanuals.com. All Manuals Search And Download.
Features and menus
Channel Menu
MAIN MENU
1 Audio
2 Picture Quality
3 Screen
4 Channel
5 Time
6 Parental Controls
Signal Type Displays a choice list that lets you select the current
antenna type. This option does not appear when the GUIDE Plus+ Gold
System is set up.
CHANNEL
7 GU
8 Se
UHF/VHF Antenna Choose this if you are currently using an off-air
antenna for TV signals.
1 Signal Type
Auto Channel Search
0 Ex
2
3 List and Labels
4 Auto Tuning
0 Exit
Cable TV Choose this if you are currently using cable or a cable
box for TV signals.
Auto Channel Search Tells the TV to search automatically for all the
channels available through the antenna input. When the TV finds an
active channel, it places it in the channel list; inactive channels (weak
stations or channels with no signal at all) will be removed from the
channel list. If you are using a cable box and have setup your GUIDE
Plus+ Gold System, this option will not appear.
List and Labels Displays a control panel that lets you custom-build
your Normal channel list and choose a six-character label for each
channel. Follow the on-screen directions to enter your channels and
other information.
Channel # Use the up and down arrows to scroll up and down
through the channel scan list. You can enter the channel number
directly using the number buttons.
Normal List Only the channels included in the Normal list are
available when you scan up and down using the CHAN buttons. Use
the up and down arrows to indicate whether the channel number
indicated is included (Yes) or is not included (No) in the Normal
channel list.
Channel Labels Use the up and down arrows to enter a six-
character label for each channel. Hold the button down to scroll
quickly through the characters. Press RESET to clear a label. The TV
can store up to 27 labels in memory.
Auto Tuning Displays a choice list that lets you set up the TV to
automatically tune to the correct input channel when you press a
component button (VCR1, DVD, VCR2, AUX or SAT•CABLE) on the
remote.
Set VCR 1 Channel Displays a choice list that lets you select the
channel that the TV tunes to when you press the VCR1 button.
Set VCR2 Channel Displays a choice list that lets you select the
channel that the TV tunes to when you press the VCR2 button.
Set DVD Channel Displays a choice list that lets you select the
channel that the TV tunes to when you press the DVD button.
Set SAT/Cable Channel Displays a choice list that lets you select
the channel that the TV tunes to when you press the SAT•CABLE
button.
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Features and menus
The choices for each screen are:
MAIN MENU
Not Connected Choose this if you do not have a component
connected to an antenna or video input on the back of the TV, or if
you don’t want the TV to tune to a channel when the particular
component button is pressed.
1 Audio
2 Picture Quality
3 Screen
4 Channel
5 Time
6
CHANNEL
Channel 2 (SAT/Cable only) Choose this if your component is
connected to the antenna jack on the back of the TV, and you want
the TV to tune to channel 2 when you press the specified
component button. Reminder: Make sure the component’s Ch 2/3/4
switch is set to channel 2.
7
1 Signal Type
8
Auto Channel Search
2
0
3 List and Labels
4 Auto Tuning
0 Exit
SET VCR1 CHANNEL
1 Not connected
2 Channel 3
3 Channel 4
4 Video 1 Input
5 Video 2 Input
Channel 3 Choose this if your component is connected to the
antenna jack on the back of the TV, and you want the TV to tune to
channel 3 when you press the specified component button.
Reminder: Make sure the component’s Ch 3/4 switch is set to
channel 3.
Channel 4 Choose this if your component is connected to the
antenna jack on the back of the TV, and you want the TV to tune to
channel 4 when you press the specified component button.
Reminder: Make sure the component’s Ch 3/4 switch is set to
channel 4.
Video 1 Input Choose this if your component is connected to the
INPUT1 jacks on the back of the TV and you want the TV to tune to
VID1 (SVID1 if you used an S-Video cable) input channel when you
press the specified component button.
Video 2 Input Choose this if your component is connected to the
INPUT2 jacks on the back of the TV and you want the TV to tune to
VID2 (COMP2 if you used the Y PB PR jacks) input channel when you
press the specified component button.
Time Menu
MAIN MENU
1 Audio
2 Picture Quality
3 Screen
4 Channel
Sleep Timer Displays a control panel that lets you select the amount
of time you want to give the TV before it shuts itself off.
5 Time
6 Parental Controls
7 GUIDE Plus+ Menu
Schedule Displays a control panel that lets you set up a schedule for
turning the TV on and off automatically. Make sure to turn the
schedule on. The on-screen directions guide you through the steps
needed to set the schedule.
TIME
8
0
1 Sleep Timer
2 Schedule
3 Set Time
0 Exit
Set Time Displays a control panel that lets you enter the current time.
The on-screen directions guide you through the steps needed to set the
time. If your GUIDE Plus+ Gold System is setup and running then it will
automatically update your time and this option will not be available.
36
Download from Www.Somanuals.com. All Manuals Search And Download.
Features and menus
Parental Controls and V-Chip
MAIN MENU
1 Audio
2 Picture Quality
3 Screen
4 Channel
The Parental Controls menu allows you to program your TV so that children
cannot see certain programs, channels, or use the front panel controls.
5 Time
6 Parental Controls
7 GUIDE Plus+ Menu
The first three choices in the Parental Controls menu involve software inside
your TV (dubbed V-Chip) which allows you to “block” TV programs and movies
based on violence, sex, or other content you may believe children should not
view. In other words, it lets you program your TV so it will not display certain
programs. Once you block programs, you or other adults are not limited to only
parent-approved programs; you can “unblock” programs by entering a
password.
8 e
PARENTAL CONTROLS
0
1 V-Chip TV Rating Limit
2V-Chip Movie Rating Limit
3V-Chip Unrated Program Block
4 Channel Block
5 Front Panel Block
6 Lock Parental Controls
0Exit
The software inside your TV comes turned “off,” so if you choose not to
implement it, you can just ignore it.
When turned “on,” the software reads a code that most broadcasters send with programs. That code tells the
software the program’s age-based rating (TV-MA, TV-14, etc.) and content themes (Violence (V), Adult Language (L),
etc.). If you have blocked the rating and/or content themes that the program contains, you will receive the message,
“This channel is not approved for viewing,” when you turn to that particular channel. Broadcasters are not required
to provide content themes, so programs received with no content themes will only be blocked if you block their age-
based rating. You can also block out programs that have been given a rating of “Not Rated,” and programs that are
considered “unrated” because no code has been sent by the broadcaster.
The TV age-based ratings and content themes you can block are listed in the table below.
Age-Based
Description and Content Themes for Age-Based Ratings
Rating
Mature Audience Only. Specifically designed to be viewed by adults and may be unsuitable for
TV-MA
children under 17. It contains one or more of the following content themes: crude indecent
language (L), explicit sexual activity (S), or graphic violence (V).
Parents Strongly Cautioned. Contains some material that many parents would find unsuitable for
children under 14. Parents are strongly urged to exercise greater care in monitoring this program
and are cautioned against letting children under the age of 14 watch unattended. This program
contains one or more of the following content themes: intensely suggestive dialogue (D),
strong coarse language (L), intense sexual situations (S), or intense violence (V).
TV-14
Parental Guidance Suggested. Contains material that parents may find unsuitable for younger
children. Many parents may want to watch it with their younger children. The program contains
one or more of the following content themes: some suggestive dialogue (D), infrequent
coarse language (L), some sexual situations (S), or moderate violence (V) .
TV-PG
TV-G
General Audience. Most parents would find this program suitable for all ages. It contains little or
no sexual dialogue (D), no strong language (L) little or no sexual situations (S), or
violence (V).
Directed to Children 7 years and older. Designed for children ages 7 and above. It may be more
appropriate for children who have acquired the developmental skills needed to distinguish between
make-believe and reality. Themes and elements in this program may include mild fantasy violence
(FV) or comedic violence, or may frighten children under the age of 7.
TV-Y7
All Children. Themes and elements in this program are designed for a young audience, including
children from ages 2-6. It is not expected to frighten younger children.
TV-Y
37
Download from Www.Somanuals.com. All Manuals Search And Download.
Features and menus
V-Chip TV Rating Limit
The V-Chip TV Rating Limit lets you decide what TV programs can and
cannot be viewed.
To set TV programming limits:
PARENTAL CONTROLS
1 V-Chip TV Rating Limit
2V-Chip Movie Rating Limit
3V-Chip Unrated Program Block
1. Choose Parental Controls from the Main menu. If Parental Controls
have previously been locked, you must enter your password. If they are
not locked, you will get a message reminding you that your limits will
not be effective until you lock Parental Controls.
4 Channel Block
5 F
V-CHIP TV RATING LIMIT
- - Content - -
Rating
Status
6 LD L S V FV
TV-MA VIEW
V V V
0E^
Press ^/v to select rating.
Press MENU to exit.
D L S V FV
V V V
V V V V
V V V V
RATING
TV-MA
TV-14
TV-PG
TV-G
TV-Y7
TV-Y
STATUS
View
View
View
View
View
View
2. Press MENU to continue.
3. Highlight and select V-Chip TV Rating Limit.
V
4. Once you get to the V-Chip TV Rating Limit screen, use the arrows and
OK on your remote to change the status of a TV program rating or
content theme from View to Block.
The following sections give you more details about how to change the
status of TV program limits.
The Ratings Limits Screen
Below is an example of where items are located within the Rating Limits screen.
Rating Field
Lets you select from a list of age-based
ratings you can block or view.
Rating Status Field
Lets you select whether the status of the age-
based rating limit to the left is View or Block.
V-CHIP TV RATING LIMIT
- - Content - -
Content Themes
Lists the content
themes you can block
or view.
Rating Status
D L S V FV
V V V
Press ^/v to select rating.
TV-MA VIEW
^
Press MENU to exit.
Content Status
Fields
D L S V FV
RATING STATUS
V V V
V V V V
V V V V
TV-MA
TV-14
TV-PG
TV-G
View
View
View
View
View
View
Lets you select which
content themes to
view for the selected
rating, and whether
the status of the
content theme is
currently View (V) or
Block (B).
V
TV-Y7
TV-Y
Rating Settings Area
Lets you see the current block/view state of age-based ratings and
associated content. The View (V) settings are coded in green, and
the Block (B) settings are coded in red.
38
Download from Www.Somanuals.com. All Manuals Search And Download.
Features and menus
Blocking Age-Based Ratings
You can automatically block all program ratings above a specified
age-based rating level. For example, if you only want your child to
watch programs that have a TV-G rating and lower (in other words,
you want the child to watch TV-G, TV-Y7, and TV-Y), then you need to
block out other programming with higher ratings.
When you change the status of a
rating to Block, the system will
automatically block higher
ratings and all corresponding
content themes.
To block programs with higher ratings:
1. First, determine the lowest level rating you do not want the child
to watch.
2. Use the left and right arrows to highlight the Rating Field.
Hierarchy of
3. Use the up and down arrows on the remote to scroll through the
age-based rating limits. Keep scrolling until the rating
corresponding with the lowest rating you do not want the child
to watch appears.
Age-Based Ratings
TV-MA
TV-14
TV-PG
Mature Audience
Only
In the example discussed above, you would scroll through the
rating field until TV-PG appears, since the highest rating you
want the child to watch is TV-G.
Parents Strongly
Cautioned
4. Use the right arrow to move the yellow highlight to the rating
status field.
Parental Guidance
Suggested
5. Press the up or down arrow to toggle from View to Block. The
status for the rating listed to the left and all higher ratings
automatically changes to Block (B).
TV-G
General Audience
TV-Y7
Directed to Children
7 years and older
Rating status field
V-CHIP TV RATING LIMIT
- - Content - -
Rating
field
Rating
TV-PG
Status
D L S V FV
B B B B
TV-Y
All Children
Content status
fields
Block
^
Press ^/v to view programs with
this rating. Press MENU to exit.
D L S V FV
B B B
B B B B
B B B B
RATING
TV-MA
TV-14
TV-PG
TV-G
TV-Y7
TV-Y
STATUS
Block
Block
Block
View
V
View
View
6. Press MENU or OK on the remote to return to the menu or exit
the screen when you are finished.
Pressing RESET on the remote
will reset all ratings to View
and V.
7. Select Lock Parental Controls from the Parental Controls menu.
Enter a password, and if you have not already set your password,
you will be prompted to enter it again to confirm.
39
Download from Www.Somanuals.com. All Manuals Search And Download.
Features and menus
Viewing Age-Based Ratings
Rating status field
After you block age-based ratings, you have the option of
changing some of the ratings back to View.
V-CHIP TV RATING LIMIT
- - Content - -
Rating
TV-14
Status
D L S V FV
V V V V
1. Determine which blocked rating you want to view.
Rating
field
Content
status
fields.
View
^
Press ^/v to view programs with
this rating. Press MENU to exit.
2. Use the left and right arrows to highlight the Rating Field.
D L S V FV
B B B
V V V V
B B B B
RATING
TV-MA
TV-14
TV-PG
TV-G
TV-Y7
TV-Y
STATUS
Block
View
Block
View
View
View
3. Use the up and down arrows to select the rating whose
status is Block.
4. Press the right arrow to move the yellow highlight to the
rating status field.
V
5. Press the up or down arrows to toggle between View
and Block.
You must remember to Lock
Parental Controls for rating limits
to take effect.
Note that the content status fields corresponding to the
unblocked rating become View as well. They and the age-based
rating status are the only fields that automatically change back
to View when you complete this process.
Blocking Specific Content Themes
You can block programs based on their content. (Content is
represented by the D, L, S, V, and FV on your screen. See the
beginning of this section for details.) When you block a content
theme for a particular rating, you automatically block that
content theme for higher rated programs as well.
Content Themes
D
L
Sexually Explicit Dialogue
Adult Language
Sexual Situations
Violence
For example, if you do not want your child to watch programs
that have adult language (L) rated TV-PG or higher, then you
could block out all programming TV-PG and above containing
adult language.
S
V
FV
To block program content:
Fantasy Violence
1. Determine the lowest level of content you do not want the
child to watch.
2. Use the left and right arrows to highlight the Rating Field.
3. Use the up and down arrows on the remote to scroll through
the age-based ratings until the rating that corresponds with
the lowest content you do not want the child to watch
appears. (In the example above, you would scroll through
the ratings until the TV-PG rating appeared.)
Broadcasters are not required to
provide content themes or age-
based ratings. Programs received
with no content themes will only
be blocked if you block their age-
based rating.
4. Press the right arrow to move the highlight to the field
corresponding with the content theme you wish to block.
5. Press the up or down arrow to change content status from V
to B. All higher ratings’ content theme will automatically
change to B.
40
Download from Www.Somanuals.com. All Manuals Search And Download.
Features and menus
Rating status field
You must remember to Lock
Parental Controls for rating limits
to take effect.
V-CHIP TV RATING LIMIT
- - Content - -
Rating
field
Rating
TV-PG
Status
View
D L S V FV
Content themes
V B V V
^
Content status fields
Press ^/v to view programs with
this content for this rating.
D L S V FV
B V V
V B V V
V B V V
RATING
TV-MA
TV-14
TV-PG
TV-G
TV-Y7
TV-Y
STATUS
View
View
View
View
View
View
V
6. Press MENU or OK to return to the menu or exit the screen.
Viewing Specific Content Themes
If you block specific content themes, you have the option of going back and
changing some of the content themes back to View (V):
Pressing RESET on the remote
will reset all ratings to View
and V.
1. Determine the content themes you want to change to View (V).
2. Use the left and right arrows to highlight the Rating Field.
3. Use the up and down arrows to scroll through the age-based ratings
until the rating whose content theme you want to change to View
appears.
4. Press the right arrow to move the yellow highlight to a particular
content theme status, such as the B under language (L) corresponding
with TV-14.
5. Press the up or down arrows to change its status back to V. Your child
would then be able to watch programs with TV-14 adult language
content, but not programs with TV-PG or TV-MA language content.
Rating status field
V-CHIP TV RATING LIMIT
- - Content - -
Rating
field
Rating
TV-14
Status
View
D L S V FV
Content themes
Content status fields
V V V V
^
Press ^/v to view programs with
this content for this rating.
D L S V FV
B V V
V V V V
V B V V
RATING
TV-MA
TV-14
TV-PG
TV-G
TV-Y7
TV-Y
STATUS
View
View
View
View
View
View
V
Note that only the content theme status corresponding to TV-14 language
(L) changes to View (V). Higher rated content themes, such as that for TV-MA
language, do not change.
41
Download from Www.Somanuals.com. All Manuals Search And Download.
Features and menus
V-Chip Movie Rating Limit
You set movie rating limits by blocking movies rated above a specified level.
Blocking Movie Ratings
If you only want your child to watch movies that have a PG rating and lower
(in other words, movies rated PG and G), then you could automatically block
out all other movies with higher ratings.
PARENTAL CONTROLS
To block movies:
1 V-Chip TV Rating Limit
2 V-Chip Movie Rating Limit
3V-Chip Unrated Program Block
4 Channel Block
5 Front Panel Block
6 Lock Parental Controls
0Exit
1. Highlight the rating field and press the up and down arrows to find the
rating that is the lowest rating you do not want the child to watch. (In
the example above, you would point to the rating status button
corresponding to PG-13, since the highest rating you want the child to
watch is PG.)
2. Use the right arrow to highlight the rating status field. Press the up and
down arrows to change the button from View to Block. All higher
ratings’ View buttons will automatically change to Block.
Some movies may be given a Not
Rated (NR) rating. After blocking
movie ratings, you must set NR to
View separately to view NR
movies.
Rating status
Rating field
field
V-CHIP MOVIE RATING LIMIT
Rating
PG-13
Status
Block
^
Press ^/v to view programs with
this rating. Press MENU to exit.
RATING
NR
STATUS
Block
Block
Block
Block
Block
View
X
NC-17
R
PG-13
PG
G
View
3. Press OK to return to the menu or exit the screen.
4. If Parental Controls are not locked, you must lock them so the movie
rating limits will take effect. See the section Locking Parental Controls.
You must remember to Lock
Parental Controls for rating limits
to take effect.
Viewing Movie Ratings
After you block movie ratings, you have the option of changing some of the
rating status buttons back to View:
1. Highlight the rating field and press the up and down arrows to find the
rating you want to view.
Rating field
Rating status field
2. Use the right arrow to highlight the rating status field. Press the up and
V-CHIP MOVIE RATING LIMIT
down arrows to change the button from Block to View.
Rating
NC-17
Status
View
For example, if movies with a rating of PG-13 and higher are blocked,
you can change the rating status button corresponding with NC-17. Your
child would then be able to watch all movies with a G, PG, and NC-17
rating.
^
Press ^/v to block programs with
this rating. Press MENU to exit.
RATING
NR
STATUS
Block
Block
View
X
NC-17
R
PG-13
PG
G
Block
Block
View
3. Press MENU or OK to return to the menu or exit the screen, and be sure
parental controls are locked (see the section Locking Parental Controls).
View
42
Download from Www.Somanuals.com. All Manuals Search And Download.
Features and menus
V-Chip Unrated Program Block
PARENTAL CONTROLS
Selecting this option lets you decide if programs that the V-Chip recognizes
as “unrated” can be viewed. Note that “unrated” TV programs may include
news, sports, political, religious, local and weather programs, emergency
bulletins, public announcements, and programs without ratings.
1 V-Chip TV Rating Limit
2 V-Chip Movie Rating Limit
3 V-Chip Unrated Program Block
4 Channel Block
V-CHIP UNRATED PROGRAM BLOCK
5 Fro
6 Loc
View All unrated programs are available.
Block All unrated programs are not available.
0Exi
1 View
2 Block
Don’t forget to lock parental controls after you change the status of unrated
program viewing. If you do not, the limit will not take effect.
Channel Block
Selecting this option lets you decide what channels can be viewed.
View Makes the selected channel viewable.
Block The front panel and remote CH (channel) buttons will tune only
to channels that you have marked as View. You may tune to a blocked
channel manually by using the number buttons and entering the correct
password.
PARENTAL CONTROLS
1 V-Chip TV Rating Limit
2 V-Chip Movie Rating Limit
3 V-Chip Unrated Program Block
4 Channel Block
Don’t forget to lock parental controls after you change the status of Channel
Block. If you do not, the channel block will not take effect.
5 Front Panel Block
CHANNEL BLOCK
6 Lo
Channel #
Status
HEADLNBlock
0Ex
59
^
Front Panel Block
Press ^ or v, keypad, or CH ^/v
to set channel, MENU to exit.
Selecting this option lets you block (disable) or unblock (enable) the TV’s
front panel. The remote still tunes to any channel. Front Panel Block can:
•
•
Keep children from watching TV when the parent is not present.
Keep small children from playing with the buttons.
PARENTAL CONTROLS
(When using this as a Parental Control method, you should remove access to
any remote capable of controlling the front panel while you have the Front
Panel blocked.)
1 V-Chip TV Rating Limit
2 V-Chip Movie Rating Limit
3 V-Chip Unrated Program Block
4 Channel Block
Don’t forget to lock parental controls after you change the status. If you do
5 Front Panel Block
6 Lock Parental Controls
not, the front panel block will not take effect.
FRONT PANEL BLOCK
0Ex
1 Unblock
2 Block
Lock/Unlock Parental Controls
Selecting this option lets you lock and unlock parental controls settings using
a password.
If you do not lock parental controls, none of the settings for V-Chip,
Channel Block, or Front Panel Block will take effect.
PARENTAL CONTROLS
If you forget your password, press and hold TV on the remote and the MENU
button on the television simultaneously for 3 seconds. Parental controls will
then unlock and you can re-enter a password via Lock Parental Controls.
1 V-Chip TV Rating Limit
2 V-Chip Movie Rating Limit
3 V-Chip Unrated Program Block
4 Channel Block
5 Front Panel Block
6 Lock Parental Controls
0Exit
43
Download from Www.Somanuals.com. All Manuals Search And Download.
Features and menus
GUIDE PLUS+ Gold System
MAIN MENU
1 Audio
2 Picture Quality
3 Screen
4 Channel
You can access the GUIDE Plus+ Gold menu directly by pressing GUIDE on
the remote, or by pressing MENU on the remote and then selecting GUIDE
Plus+ Menu. If you press MENU on the remote, you can access several
other features the GUIDE Plus+ Gold System offers:
5 Time
6 Parental Controls
7 GUIDE Plus+ Menu
8 Setup
0 Exit
GUIDE Plus+ Setup Displays the GUIDE Plus+ Gold System setup screen.
GUIDE PLUS+ MENU
1 GUIDE Plus+ Setup
2 GUIDE Plus+ Label
3 Continuous Demo
0 Exit
Setup Setting up the GUIDE Plus+ Gold System is detailed in the
Interactive Setup section of the book.
View Demo Runs the GUIDE Plus+ Gold System demonstration.
Options Displays the GUIDE Plus+ Gold System autodisplay options.
On Automatically displays the GUIDE Plus+ Gold System
when you use the TV button on the remote to turn on the
TV.
Off Disables the GUIDE Plus+ Gold System from being
displayed when you use the TV button on the remote to
turn on the TV.
GUIDE Plus+ Label Displays the GUIDE Plus+ Gold System label menu.
On Displays the station name when you change channels.
Off Disables the Label feature.
Continuous Demo Runs the GUIDE Plus+ Gold System demonstration
until it is turned off. To end the Continuous Demo, press MENU.
The following sections tell you more about the GUIDE Plus+ Gold System,
how to use it, and how it works.
About the GUIDE PLUS+ Gold System
Action
Buttons
Menu
Options
Program
Information
Live video
window
The GUIDE Plus+ Gold System is an interactive on-screen program guide
that lists TV schedules for your area and allows your TV direct control of a
cable box and VCR. You must first set up the GUIDE Plus+ Gold Menu
system in order to view it (see the Interactive Setup section for more
details).
To bring up the GUIDE Plus+ Gold screen, press GUIDE.
There are six sections to a GUIDE Plus+ Gold screen:
•
A row of Action buttons at the top of the screen
numbered 1, 2 and 3
•
•
•
•
•
Program information
A row of Menu options
Channel listings
Ad/Show
Information
Channel Listings
Advertising and special show information
Live video window
44
Download from Www.Somanuals.com. All Manuals Search And Download.
Features and menus
Getting In & Out of the GUIDE Plus+ Gold System
ON OFF
VCR1
TV
To enter the GUIDE Plus+ Gold System:
•
Press GUIDE on the remote.
DVD VCR2 AUX SAT•CABLE
There are three ways to exit the GUIDE Plus+ Gold System:
MUTE
SKIP
•
•
•
Press OK to exit the GUIDE Plus+ Gold System and tune to the
channel highlighted in the Channel listing.
GUIDE
Press GUIDE to exit the GUIDE Plus+ Gold System and tune to the
channel displayed in the View window.
SOUND
GUIDE
GO BACK
INFO
Press CLEAR to exit the GUIDE Plus+ Gold System and return to the
original channel.
OK
OK
MENU
CLEAR
Downloading Data
CLEAR
The GUIDE Plus+ Gold System is not available until it completes its first
download of program information. When the power is turned off, the
TV locates a “host channel” that carries GUIDE Plus+ Gold data
containing program schedule and channel mapping information. A
channel map is the list of stations and their respective channels.
ANTENNA
WHO•INPUT
REVERSE PLAY FORWARD
REC•VCR+ STOP PAUSE
To ensure that your first download of data is complete, you should leave
your TV off overnight. Downloads occur several times a day. The TV must
be turned off for GUIDE Plus+ Gold data to download.
SWAPCH CTRL RESET
PIP
If the TV loses power or is unplugged, GUIDE Plus+ Gold program
information may be lost. When power is restored, make sure the setup
information is still correct. The GUIDE Plus+ Gold program will complete
a download at the next available time.
Channel Mapping
If more than one cable company services your area, you may be
prompted with a Channel Mapping screen after the first GUIDE Plus+
Gold download. You will need to identify your cable company by
selecting the correct channel numbers for the stations in question.
•
Use the left and right arrows to change the channel group and
press OK when the correct channel group is highlighted.
The GUIDE Plus+ Gold System Menus
The GUIDE Plus+ Gold System offers seven different options on the Menu
bar: GRID, SORT, NEWS, SCHEDULE, MESSAGES, EDITOR and SETUP. To
access the Menu bar:
1. Press GUIDE to bring up the GUIDE Plus+ Gold screen.
2. Press MENU or use the up and down arrows to highlight the Menu
bar. The Grid Guide comes up by default.
3. Use the left and right arrows to access other menus.
4. Press OK, MENU, or use the down arrow to see the menu options.
Since the program information provided
by the GUIDE Plus+ Gold System is based
on your locale, you will need to run
Setup again if you move.
45
Download from Www.Somanuals.com. All Manuals Search And Download.
Features and menus
Grid Guide
GUIDE Plus+ Gold screens illustrated in
this book are representations of what
you are likely to see. Not all channels,
programs, and GUIDE Plus+ Gold
information depicted will be available in
your area.
The Grid Guide appears each time you enter the GUIDE Plus+ Gold menu
system. It displays the current programming for each channel. The live
program is displayed in the video window.
New features and options can be
downloaded to the GUIDE Plus+ Gold
System, so these too are subject to
change.
•
Use the up and down arrows to browse channel listings and CH ^/v
to page through listings. Use the right and left arrows to browse
future program listings.
•
To tune to a channel, highlight the program you want to view in the
channel listing and press OK. Press CLEAR to exit the GUIDE Plus+
system and return to the original channel. Press GUIDE to exit the
GUIDE Plus+ Gold System and tune to the channel in the view
window.
Grid Guide
Action Buttons
Grid Guide Action Buttons
Action buttons will change according to where you are in the GUIDE
Plus+ Gold System. Be sure to look at the action bar before pressing the
command numbers.
Grid Guide
Menu
Selection
When highlighting the Channel listings, the following Action buttons
are available on the bar:
•
•
•
Watch Press 1 on the remote to place a timer in the Schedule for
the TV to turn on and tune to the program highlighted in the
Channel listing. When the TV turns on, the GUIDE Plus+ Gold System
will automatically appear with the scheduled program highlighted
and tuned in the View window.
ON OFF
VCR1
TV
DVD VCR2 AUX SAT•CABLE
Go To Press 2 on the remote to bring up the direct dial box and
enter the number of the channel you want. This will highlight the
channel and current program in the channel listing of the Grid
Guide. Press OK to tune to the highlighted channel. If the view
window is unlocked, you can press GUIDE to tune to the channel.
MUTE
SKIP
Action Button
command
numbers
SOUND
GUIDE
GO BACK
INFO
Record Press 3 on the remote to place a timer in the Schedule for
the VCR to record the program highlighted in the Channel listing. If
you have a cable box, changing channels on the TV will not cause
the cable box channel to change while recording.
OK
MENU
CLEAR
The Program information window will display a confirmation when you
have successfully created a timer to watch or record. If you have selected
two programs to watch or record which begin at the same time or
overlap, you will receive a timer conflict message. The GUIDE Plus+ Gold
System will not schedule a conflicting timer, therefore you must choose
between the two programs.
ANTENNA
WHO•INPUT
Timer Recording
When highlighting the Channel names (the left column on the Channel
listing), the following Action buttons are available on the bar:
Make sure that the G-LINK cable is
connected to the TV and VCR and all steps
in the Guide Plus+ setup routine have been
completed successfully.
46
Download from Www.Somanuals.com. All Manuals Search And Download.
Features and menus
•
Lock/Unlock Press 1 to lock or unlock the video window to either
stay at one channel as you browse the GUIDE Plus+ Gold System
(lock) or change as you browse through different channels (unlock).
The PIP button on the remote also toggles the video window
between the locked and unlocked states.
The PIP button on the remote also toggles
the video window between locked and
unlocked states.
•
Go To Press 2 on the remote to bring up the direct dial box and
enter the number of the channel you want. This will highlight the
channel and current program in the channel listing of the Grid
Guide. Press OK to tune to the highlighted channel. If the view
window is unlocked, you can press GUIDE to tune to the channel.
Sort
The Sort Menu lets you browse programs by category. The channel to
which you are currently tuned is displayed in the video window. To sort:
Sort Menu
Action Buttons
1. Press MENU on the remote to highlight the Menu bar.
2. Use the arrows to highlight Sort. When Sort is highlighted for the
first time, the Movies category is displayed. Thereafter, the last
category used becomes the default. A listing of subcategories is
displayed below the category name.
Sort Menu
Selection
3. Use the up and down arrows to highlight a subcategory. For
Categories
example, highlight All and press OK.
4. When the listing comes up, All Movies are displayed. Use the up
and down arrows to browse the list one at a time. Use CH^ and CHv
to browse through the list one page at a time. You can also view the
next seven days’ programming by pressing the right arrow.
5. Select MENU to return to the menu bar, or press GUIDE or CLEAR to
exit the GUIDE Plus+ Gold System.
Sort Menu Action Buttons
When viewing the results of a Sort, the following Action buttons will
appear on the bar:
•
Watch Press 1 on the remote to place a timer in the Schedule, and
then follow the on-line help for further options. Placing a timer in
the Schedule will cause the TV to turn on and tune to the program
highlighted in the Channel listing at the predetermined time. When
the TV turns on, the GUIDE Plus+ Gold System will automatically
appear with the scheduled program highlighted and tuned in the
View window.
•
Record Press 3 on the remote to place a timer in the Schedule for
the VCR to record the program highlighted in the Channel listing. If
you have a cable box, changing channels on the TV will not cause
the cable box channel to change while recording.
Be sure that during the GUIDE Plus+ Gold
setup you specified that you have a VCR.
If you do not, the RECORD option will not
be available.
47
Download from Www.Somanuals.com. All Manuals Search And Download.
Features and menus
The program information window will display a confirmation when you
have successfully created a timer to watch or record. If you have selected
two programs to watch or record which begin at the same time or
overlap, you will receive a timer conflict message. The GUIDE Plus+ Gold
System will not schedule a conflicting timer; you must choose between
the two programs.
News
The News Menu lets you browse current news stories by headline.
1. Press MENU on the remote to highlight the Menu bar.
2. Use the arrows to highlight News.
News Menu
Selection
3. Use the up and down arrows to highlight a story.
• Use the up and down arrows to browse the list one at a time.
Use CH^ and CHv to browse through the list one page at a time.
4. Press the right arrow button to see full text.
5. Press MENU on the remote to return to the menu bar, or press
GUIDE or CLEAR to exit the GUIDE Plus+ Gold System.
Schedule
The Schedule menu lets you create timers for either viewing or
recording programs. The GUIDE Plus+ Gold System allows one-button
recording if you have positioned the G-LINK cable wand in front of your
VCR. See the Setup and Connections section of this manual for more
details on positioning the G-LINK cable.
Sample
News
Story
To schedule a program to watch or record:
1. Press GUIDE to bring up the GUIDE Plus+ Gold System.
2. Highlight a program within the Channel listing.
3. Select Watch or Record from the Action buttons bar. The timer is
then automatically logged into the Schedule menu.
Schedule Menu
Action Buttons
4. If you select Record, make sure to place a blank tape in the VCR.
The program information window will display a confirmation when you
have successfully created a timer to watch or record.
To remove or change the frequency (daily, once, or weekly) of a
scheduled event, access the Schedule Menu from the Menu bar.
Schedule
Menu
Selection
1. Press GUIDE to bring up the GUIDE Plus+ Gold System.
2. Press MENU to highlight the Menu bar.
3. Use the arrows to highlight the Schedule menu selection.
4. Use the up and down arrows to highlight the program you want to
edit. Then use the Schedule Menu Action Buttons as described in
the next section.
48
Download from Www.Somanuals.com. All Manuals Search And Download.
Features and menus
Schedule Menu Action Buttons
When viewing the Schedule menu the following Action buttons will
appear on the bar:
Overlapping Schedules
If you have selected two programs to
watch or record which begin at the same
time or overlap, you will receive a time
conflict message. The GUIDE Plus+ Gold
System will not schedule a conflicting
timer, therefore you must choose
•
•
Remove Highlight the Watch or Record timer you wish to remove
from the schedule and press 1 on the remote.
Change Highlight the Watch or Record timer you wish to change
and press 3 on the remote to toggle the frequency between the
following choices:
between the two programs.
DAILY records the same program each day Monday through
Friday.
ONCE records only on that day.
WEEKLY records the program each week at the same time.
Messages
Action Buttons
Messages
Occasionally you will receive messages regarding your GUIDE Plus+ Gold
System, as well as special programming information. You can access
these messages from the Message Menu on the Menu bar.
Messages
Menu
Selection
To read messages:
1. Press MENU on the remote to select the Menu bar.
2. Use the arrows to highlight the Messages menu selection.
3. Highlight the message you wish to read by using the up and down
arrows.
4. Press INFO to display the full text of the message. If the text
continues beyond the screen, press INFO to view the next page of
text. Once you have reached the end of the message, pressing INFO
closes the expanded information and returns you to the Messages
screen.
5. Then use the Messages Menu Action Button as described in the next
section.
Messages Menu Action Button
When viewing the Messages menu the following Action button will
appear on the bar:
•
Remove Highlight the message you wish to delete and press 1 on
the remote.
49
Download from Www.Somanuals.com. All Manuals Search And Download.
Features and menus
Editor
You may customize the channel listing by enabling or disabling the
display of certain channels. For instance, you may disable channels that
you never watch. You can restore disabled channels at a later point in
time.
Editor Menu
Action Buttons
1. Press GUIDE to bring up the GUIDE Plus+ Gold System.
2. Press MENU to highlight the Menu bar.
3. Use the right and left arrows to highlight the Editor menu selection.
4. Use the up and down arrows to select a channel.
Editor
Menu
Selection
Then use the Editor Menu Action Buttons as described in the next
section.
Editor Menu Action Buttons
While browsing the Editor menu, the following Action buttons are
available on the bar:
•
•
•
Cancel Press 1 on the remote to cancel any changes made since
entering the Editor Menu.
Change Press 2 on the remote to change the channel number for
the highlighted channel line.
Expanded Information
To view more information about a
program, advertisement or special,
On/Off Press 3 on the remote to toggle the state of the channel
between On and Off.
highlight the channel listing or ad/show
information box and press the INFO
button. Requesting more information
about a particular show will also display
the PlusCode programming number and
the Shows on Next for that channel.
Setup
The Setup Menu lets you access the GUIDE Plus+ System setup
information. To access the Setup option:
1. Press MENU on the remote to highlight the Menu bar.
2. Use the arrows to highlight the Setup menu option.
3. Use the up and down arrows to select Setup, View Demo, or Options:
•
Setup Displays the GUIDE Plus+ Gold System setup screens.
Setting up the GUIDE Plus+ Gold System is detailed in the
Interactive Setup section of this book.
•
•
View Demo Runs the GUIDE Plus+ Gold System
demonstration.
Ad/Show Information
Options Displays the GUIDE Plus+ Gold System autodisplay
options.
Pressing INFO while highlighting an ad
panel will fill the screen with any
additional and/or promotional
information regarding that particular
program.
On Automatically displays the GUIDE Plus+ Gold System when
you use the TV button on the remote to turn on the TV.
Pressing the INFO button again exits the
expanded information screen.
Off Disables the GUIDE Plus+ Gold System from being displayed
when you use the TV button on the remote to turn on the TV.
50
Download from Www.Somanuals.com. All Manuals Search And Download.
Features and menus
PIP (Picture-in-Picture) Operation
ON OFF
VCR1
TV
The PIP (picture-in-picture) feature lets you display a second, smaller
picture on top of the main picture. If the PIP window is displayed, and
you change the PIP input (by pressing WHO•INPUT) to COMP2, PIP is not
displayed. If you press the PIP button while viewing COMP2, the PIP
window is not available. (N/A) appears in the channel marker.
DVD VCR2 AUX SAT•CABLE
MUTE
SKIP
SOUND
GUIDE
GO BACK
INFO
PIP Buttons
There are seven remote buttons that control the way the PIP window
works:
OK
Move
buttons
PIP Brings up the PIP window. Press PIP again to remove the
MENU
CLEAR
window.
If you selected Alternate with PIP button in the PIP Closed-Caption
Display menu, press the PIP button when the PIP window is on the
screen to toggle between PIP on, PIP on with closed captions, and PIP
off.
ANTENNA
WHO•INPUT
REVERSE PLAY FORWARD
REC•VCR+ STOP PAUSE
MOVE buttons let you move the PIP window to different
SWAPCH CTRL RESET
PIP
areas of the screen.
SWAP Switches, or “swaps,” the video from the PIP window
with the main picture.
CH CTRL (Channel Control) Lets you switch channel control
between the PIP window and the main picture.
For instance, press PIP to bring up the PIP window. You can change
channels by entering channel numbers or pressing the CH^ (channel up) or
CHv (channel down) buttons. When you press the CH CTRL button the
channel control switches to the main picture. You can now change
channels in the main picture by entering channel numbers or pressing the
CH^ or CH v buttons.
PIP buttons
Press CH CTRL again to return the channel control to the PIP
window.
Two Tips for Using PIP Buttons
Skip to PIP: Channel Surfing in the Main Picture
You can surf through the channels during commercial breaks using the
SKIP and CH (channel) buttons.
1. Press SKIP to set the commercial skip timer and bring up the PIP
window.
2. Press the CH ^ or CH v buttons to surf through the channels in the
main picture. When the SKIP feature times out, the main picture will
tune to the original channel automatically.
A typical use of SWAP is to scan through
channels in the PIP window, and when
you find a channel you like, press SWAP
to display that channel in the main
picture, sending the current channel to
the PIP window.
Channel Surfing in the PIP Window
You can use the PIP window to surf through channels as well.
1. Press PIP to bring up the PIP window.
2. Press the CH^ or CHv buttons. The TV begins displaying each channel
in the PIP window. If you see a channel that interests you, press SWAP.
51
Download from Www.Somanuals.com. All Manuals Search And Download.
Features and menus
SETUP
Setup Menu
When first used or after a power
outage, your television needs
to be set up.
The setup routine is detailed earlier in the manual in the Interactive
Setup section.
Would you like to begin now?
The first screen of the Interactive Setup appears automatically when you
turn on your TV for the first time or after a power outage.
Press MENU to begin setup or
Press CLEAR to exit.
You can also access the Interactive Setup from the Main Menu.
TV MAIN MENU
1 Audio
2 Picture Quality
3 Screen
4 Channel
5 Time
6 Parental Controls
7 GUIDE Plus+ Menu
8 Setup
0 Exit
SETUP
Would you like to begin Setup
now?
1 Begin setup now
2 Cancel setup
Channel Marker
There are several indicators that come up when you press the TV, INFO, PIP
or SWAP button. This display is called the Channel Marker.
12:01 CC VCR1 VID1
Mute
SAP PIP 59
12:01 Displays the current time.
CC Displayed when Closed Captioning is available on the current
channel.
VCR1 Displays the label assigned to the current channel.
VID1 Displays the current channel or input channel (VID1 or SVID1, VID2
Sleep
00:00
or COMP2).
Sample displays on a Channel Marker
Mute (or Stereo) Mute is displayed when you mute the audio. Stereo
is displayed when the current channel is broadcasting in Stereo.
SAP Displayed when the current channel is broadcasting SAP (Second
Audio Program) information.
PIP 59 (PIP Chan) Displays the current PIP channel.
Sleep Displayed when the Sleep Timer has been set.
00:00 Displayed to count down time left on the commercial skip (SKIP)
timer.
52
Download from Www.Somanuals.com. All Manuals Search And Download.
Reference
Troubleshooting
Troubles sometimes are caused by simple “faults” that you can correct without the
help of a service technician. If you experience any difficulty with your TV, check a few
basic remedies before calling your service technician.
TV will not turn on
•
Check to make sure it is plugged in.
•
Check the wall receptacle (or extension cord) to make sure it is “live” by
plugging in something else.
•
•
•
Maybe batteries in remote control are “dead.”
Maybe remote control is not aimed at remote sensor.
The front panel controls may be locked (disabled). Use the remote control to
unlock the front panel controls by selecting the Front Panel Block in the Parental
Controls menu and choosing Unblock.
Controls don’t work
•
If using remote control, make sure remote is in TV mode by first pressing TV
button.
•
The front panel MENU button may be disabled. Use the remote control to turn
off blocking. Select Front Panel Block in the Parental Controls menu and choose
Unblock.
•
Try unplugging set for two minutes and then plug it back in and turn it on again.
Problems with remote
•
•
Maybe something is between the remote and the remote sensor.
Maybe the remote is not aimed directly at the component (TV or VCR) you are
trying to control.
•
•
Maybe remote is not in TV Mode. Press the TV button so remote will control TV.
Maybe batteries in remote are weak, dead or installed incorrectly. Try replacing
batteries. (Note, if you remove the batteries, you may have to reprogram the
remote to control other components.)
•
Remove batteries and hold number 1 for at least 60 seconds to drain the
microprocessor inside the remote. Release number 1, replace the batteries, and
(if necessary) reprogram the remote.
Guide comes on when I turn on TV
•
The Guide automatically comes up when you use the TV button on the remote to
turn on the TV. You can turn off this feature by selecting GUIDE Plus+ Menu from
the Main Menu, then select Setup, then select Options and then select Off.
Turns off while playing
•
Schedule off function may have been activated.
•
Electronic protection circuit may have been activated because of a power surge.
Wait 30 seconds and then turn on again. If this happens frequently, the voltage
in your house may be abnormally high or low.
•
Unplug. Wait five minutes. Plug in again.
53
Download from Www.Somanuals.com. All Manuals Search And Download.
Reference
TV turns on unexpectedly
•
Scheduled On or Watch from the Guide may have been activated.
Blank screen
•
•
•
Maybe the component connected to the input jacks is not turned on.
Try another channel.
Press RESET, in case the picture controls are set too low.
PIP not available
•
If the PIP window is displayed, and you change the PIP input (by pressing WHO•INPUT)
to COMP2, PIP is not displayed.
•
If you press the PIP button while viewing COMP2, the PIP window is not available and
cannot be seen.
No sound, picture okay
•
•
Maybe sound is muted. Try pressing volume up button to restore sound.
Maybe speakers are turned off. Check the Audio Output and Speakers control panel in
the Audio menu.
•
If using an S-VHS component, remember to also connect the component’s L and R
AUDIO OUT jacks to the TV’s L and R INPUT jacks.
Can’t select certain channel
•
•
Channel may be blocked or not approved in the Parental Controls menu.
If using a VCR, check to make sure the TV/VCR switch on the VCR is in the correct
position.
Noisy stereo reception
•
May be a weak station. Use SOUND button to change to mono mode instead of stereo.
No picture, no sound but TV is on
•
•
•
Maybe the cable/air function is set to the wrong position.
Maybe a vacant channel is tuned.
If watching VCR (connected only through antenna input), make sure TV is tuned to
channel 3 or 4 – same as CH3/4 switch on VCR. Also check to make sure TV/VCR switch
on VCR is in the correct position.
Sound okay, picture poor
•
Check antenna connections.
•
Try adjusting sharpness function to improve weak signals.
Black box appears on the screen
•
Captioning may be turned on. Check the Closed-Caption Display control panel in the
Channel menu.
54
Download from Www.Somanuals.com. All Manuals Search And Download.
Reference
G-LINK Cable not working
•
•
Check to make sure the wands are positioned correctly.
GUIDE Plus+ Gold System control of cable box is slower than direct control of the
box itself. Keep this in mind when changing channels.
Incorrect GUIDE Plus+ Gold System channel map
•
The guide may get out of sync with the cable provider. Use setup to change the
zip code to 99999. Turn the TV off for ten minutes. Use setup again to change the
zip code to the correct value. Be sure to select the correct lineup if asked.
Care and Cleaning
CAUTION: Turn OFF your TV before cleaning.
You can clean the TV as required, using a soft lint-free cloth. Be sure to occasionally
dust the ventilation slots in the cabinet to help assure adequate ventilation.
The TV’s screen may be cleaned with a soft, lint-free cloth as well. Take care
not to scratch or mar the screen. If necessary, you may use a cloth dampened
with warm water.
Never use strong cleaning agents, such as ammonia-based cleaners, or
abrasive powder. These types of cleaners will damage the TV.
While cleaning do not spray liquid directly on the screen, or allow liquid to run down
the screen and inside the TV. Also, avoid placing drinks or vases with water on top of
the TV. This could increase the risk of fire or shock hazard or damage to the TV.
Caution: Using video games or any external accessory with fixed images for extended
periods of time can cause them to be permanently imprinted on the picture tube (or
projection TV picture tubes). ALSO, some network/program logos, phone numbers,
etc. may cause similar damage. This damage is not covered by your warranty.
55
Download from Www.Somanuals.com. All Manuals Search And Download.
Reference
RCA DIRECT VIEW TV (5”-36”) LIMITED WARRANTY
What your warranty covers:
•
Defects in materials or workmanship.
For how long after your purchase:
•
•
•
90 days from date of purchase for labor charges.
One year from date of purchase for parts.
Two years from date of purchase for the picture tube.
The warranty period for rental units begins with the first rental or 45 days from date of shipment to the rental firm,
whichever comes first.
What we will do:
•
Pay any Authorized RCA Television Service Center the labor charges to repair your television.
•
Pay any Authorized RCA Television Service Center for the new or, at our option, refurbished replacement parts and
picture tube required to repair your television.
How you get service:
•
For screen sizes of 26” and smaller: Take your RCA television to any Authorized RCA Television Service Center and pick
up when repairs are complete.
•
For screen sizes larger than 26”: Request home or pick up, repair, and return service from any Authorized RCA
Television Service Center, provided that your television is located within the geographic territory covered by an
Authorized RCA Television Service Center. If not, you must take your television to the Service Center location at your
own expense, or pay for the cost the Service Center may charge to transport your television to and from your home.
•
•
To identify your nearest Authorized RCA Television Service Center, ask your dealer, look in the Yellow Pages, or call
1-800-336-1900.
Proof of purchase in the form of a bill of sale or receipted invoice which is evidence that the product is within the
warranty period must be presented to obtain warranty service. For rental firms, proof of first rental is also required.
What your warranty does not cover:
•
Customer instruction. (Your Owner’s Manual describes how to install, adjust, and operate your television. Any
additional information should be obtained from your dealer.)
•
•
•
•
•
•
•
Installation and related adjustments.
Signal reception problems not caused by your television.
Damage from misuse or neglect.
Batteries.
Customer replacement fuses.
Images burnt onto the screen.
A television that has been modified or incorporated into other products or is used for institutional or other commercial
purposes.
•
•
A television purchased or serviced outside the U.S.A.
Acts of nature, such as but not limited to lightning damage.
Product Registration:
•
Please complete and mail the Product Registration Card packed with your TV. It will make it easier to contact you
should it ever be necessary. The return of the card is not required for warranty coverage.
56
Download from Www.Somanuals.com. All Manuals Search And Download.
Reference
Limitation of Warranty:
•
THE WARRANTY STATED ABOVE IS THE ONLY WARRANTY APPLICABLE TO THIS PRODUCT. ALL OTHER
WARRANTIES, EXPRESS OR IMPLIED (INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY OR
FITNESS FOR A PARTICULAR PURPOSE) ARE HEREBY DISCLAIMED. NO VERBAL OR WRITTEN INFORMATION
GIVEN BY THOMSON MULTIMEDIA INC., ITS AGENTS OR EMPLOYEES SHALL CREATE A GUARANTY OR IN ANY
WAY INCREASE THE SCOPE OF THIS WARRANTY.
•
REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS THE EXCLUSIVE REMEDY OF THE
CONSUMER. THOMSON MULTIMEDIA INC. SHALL NOT BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL
DAMAGES RESULTING FROM THE USE OF THIS PRODUCT OR ARISING OUT OF ANY BREACH OF ANY EXPRESS
OR IMPLIED WARRANTY ON THIS PRODUCT. THIS DISCLAIMER OF WARRANTIES AND LIMITED WARRANTY ARE
GOVERNED BY THE LAWS OF THE STATE OF INDIANA. EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE
LAW, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ON THIS
PRODUCT IS LIMITED TO THE APPLICABLE WARRANTY PERIOD SET FORTH ABOVE.
How state law relates to this warranty:
•
Some states do not allow the exclusion nor limitation of incidental or consequential damages, or limitations on how
long an implied warranty lasts, so the above limitations or exclusions may not apply to you.
•
This warranty gives you specific legal rights, and you also may have other rights that vary from state to state.
If you purchased your product outside the United States:
This warranty does not apply. Contact your dealer for warranty information.
•
Service calls which do not involve defective materials or workmanship are not covered by this warranty. Costs
of such service calls are the sole responsibility of the purchaser.
57
Download from Www.Somanuals.com. All Manuals Search And Download.
Reference
Accessory Information
Antenna (or cable-TV) connections are made with either
coaxial antenna cable or twin-lead cable. Coaxial cables
are shielded so they are less susceptible to hum or
interference from adjacent cables.
The following accessories are available from most dealers and
electronics supply stores in case you want to position your
components farther apart or need additional cables.
Most audio/video connections between components can
Antenna Cables
Screw-on Cable attaches to the
round antenna connectors (called
75-ohm F-type) on the back of your
VCR or TV. The ends screw onto the
Push-on Connector
Screw-on Coaxial
Connector
connectors for a secure connection.
VH81 (3-ft)
Round 75-ohm coaxial cable
Push-on Cable attaches to the
VH82 (6-ft)
round antenna connectors (called
75-ohm F-type) on the back of your
VCR or TV. Ends push on for a quick
Flat 300-ohm twin-lead cable
connection.
VH89 (6-ft)
be made with shielded audio and video cables that have
RCA-type phono connectors.
Audio/Video Cables
Monaural VCR Dubbing Cable
Double cable that lets you connect
the video and audio jacks of two
VHS VCRs to duplicate tapes. Can
also be used to connect a VCR to
your TV. Cable is color-coded and
shielded. Has RCA-type phono
plugs on each end.
Standard Audio/Video cable with RCA-type
phono plugs (such as No. VH83)
Gold-Tipped cable
VH83 (6-ft)
Color-Coded Jacks
The jacks on the TV’s monitor panel are color-coded for
ease of use. The video jacks are yellow, the right audio
jacks are red, and the left audio jacks are white. When
connecting components to each other, be sure that you
always connect left outputs to left inputs and right
outputs to right inputs. If a component has only one
output (mono), connect it to the r/mono input jack.
Stereo VCR Dubbing Cable
Triple cable that lets you connect
the VIDEO and AUDIO jacks of stereo
components.
To connect S-VHS (Super-VHS) components, an
S-VHS video cable is required.
Gold-Tipped cable
VH84 (6-ft)
S-Video cable (such as No. VH913)
S-Video Cable has multi-pin
connectors on each end for
connecting S-Video components to
your TV.
Gold-Plated Jacks and Gold-Tipped Cables
Gold plating helps prevent oxidation of contacts which
provides much less loss than conventional contacts. A
complete line of gold-tipped cables is available to help
you obtain optimum performance from your equipment.
VH976 (6-ft)
VH913 (12-ft)
58
Download from Www.Somanuals.com. All Manuals Search And Download.
Reference
Remote Control This is the
remote control that came
packed with your TV.
Accessory Order Form
Total
Qty
Description
Part No. Price
Screw-on antenna cable (3-ft)
VH81
$3.95
$5.95
$5.95
$5.95
$9.95
$7.95
$14.95
$3.95
$49.95
$11.15
$29.20
$4.45
Replacements or spares can
be ordered as needed.
Screw-on antenna cable (6-ft)
Push-on antenna cable (6-ft)
Monaural VCR Dubbing Cable (6-ft)
Stereo VCR Dubbing Cable (6-ft)
S-Video Cable (6-ft)
VH82
VH89
VH83
VH84
CRK76TA1
VH976
VH913
VH47
S-Video Cable (12-ft)
2-way Signal Splitter helps
you connect to a second TV
or VCR.
2-way Signal Splitter
Amplified Antenna
ANT200
193984
240895
228449
Antenna Mixer
Remote Control (CRK76TA1)
Audio•Video Adapter
Splitter
VH47
Amplified VHF/UHF/FM
Antenna allows you to easily
switch from the antenna
signal to cable or satellite
without disconnecting
antenna.
Total Merchandise............................................
Sales Tax..........................................................
ANT200
$
$
We are required by law to collect the appropriate
sales tax for each individual state, country,
and locality to which the merchandise is
being sent.
$
$
5.00
Shipping and Handling.........................................
Total Amount Enclosed..........................................
Use VISA, MasterCard, or Discover Card
preferably.
Money order or check must be in U.S.
currency only.
No COD or CASH.
Prices are subject to change without notice.
All accessories are subject to availability.
Please complete other side also
59
Download from Www.Somanuals.com. All Manuals Search And Download.
Reference
Placing an Order
Charge your order on your VISA,
MasterCard, or Discover Card by
filling in below
To place your order by phone, have your Visa, MasterCard
or Discover Card ready and call the toll-free number listed
below.
USE YOUR CREDIT CARD
®
IMPORTANT: Copy complete account number
from your VISA card
Use this number only to place on order for accessory items
listed on this order form.
1-800-338-0376
To place your order by mail, detach and mail the completed
order form with credit card information, money order or
check in US currency (made payable to Thomson multimedia
Inc.) to the following address:
My card expires:
s r
r
TM
IMPORTANT: Copy complete account number
from your MasterCard
Video Accessories
PO Box 8419
Ronks, PA 17573
Copy Number
above your
name on
My card
expires:
MasterCard
IMPORTANT: Copy complete account number
from your Discover Card
My card expires:
AUTHORIZED SIGNATURE
(Credit card order will not be processed without signature)
Print or type your name and
address clearly.
A complete and correct order
will save you days of waiting.
Name:
Street:
Apt:
Zip:
City:
State:
Daytime Phone:
Please make sure that both sides of this form
have been filled out completely.
• Allow 4 weeks for delivery.
• All accessories are subject to availability.
• Prices are subject to change.
ꢀ
60
Download from Www.Somanuals.com. All Manuals Search And Download.
Reference
A
F
PIP Channel 52
Remote buttons 51
Using 51
Accessories 58
Finding the sensor 9
Fixed images 55
Fixed Output, Speakers Off 31
Front panel
Advanced Connections 4, 6
Age-Based Ratings 37
Audio Menu 30
Point and Select 12
buttons 25
Audio Output Volume & Speakers 31
Audio Processor 30
Audio remote codes 26
Audio/Video cables 7
Auto Channel Search 13, 35
Auto Color 32
Auto Tuning 16, 20
DVD Channel 18, 35
SAT/Cable Channel 35
VCR1 Channel 16, 35
VCR2 Channel 35
R
jacks 25
Rating Limits
Movie 42
TV 38
Front Panel Block 43
G
Remote Control
Installing the batteries 10
Remote control sensor 9
G-LINK 9
Grid Guide 46
GUIDE Plus+ 50
GUIDE Plus+ Gold 44, 47, 48
GUIDE Plus+ Gold System 14, 15, 44, 45
Channel Mapping 45
Downloading information 45
Getting in and out 10
Messages 49
S
S-Video cable 7
SAP (Second Audio Program) 52
SAT/Cable Channel 19, 35
Satellite Receiver remote codes 26
Schedule 36
Screen menu 33
Set
DVD Channel 18, 35
SAT/Cable Channel 35
VCR1 Channel 16, 35
VCR2 Channel 35
Set Time 36
B
Back of the TV 6
Basic Connection 4, 5
Basic Picture Controls 32
Batteries 10
Scan Menu 47
Schedules 48
Setup 14
Sort Menu 47
Black Level 32
Buttons, remote 22
Sorting menus 47
GUIDE Plus+ System
Editing 50
C
Cable Box remote codes 26
Care and Cleaning 55
Channel,
I
Setup menu 52
Setup Screen 12
Sharpness 32
INPUT1 36
INPUT2 36
labeling 20
Signal Type
mapping 45
L
Cable TV 35
menu 35
UHF/VHF Antenna 35
Sleep Timer 36, 52
Stereo 30, 52
Labels 20, 35
Language 13, 33
List & Labels Feature 20
number 35
Channel 3 36
Channel 4 36
Channel Block 43
Channel Labels 35
Channel Marker 52
Channel menu 35
Closed Caption
Display 33
T
M
Time, current 52
Time menu 36
Time of Day, setting 16
Tint 32
Mapping, channel 45
Memory 35
Menu Language 13, 33
Menus 28
Tone Controls 30
Troubleshooting 53
TV Only connection 4
Mono 30
Mute 30
Mode 33, 34
PIP Display 33
PIP Mode 33
N
Closed Captioning 52
Coaxial cable 4, 5, 7
Color 32
Color Warmth 32
Connections
Advanced 4, 6
Basic 4, 5
TV and stereo VCR 7
TV Only 4
U
Normal List 35
UHF/VHF Antenna 35
P
V
V-Chip
Parental Controls
Channel Block 43
Age-Based Ratings 37
Blocking Movies 42
Content themes 37
Front Panel Block 43
Locking, unlocking 43
Menu 37
TV, VCR and Satellite receiver 8
TV, VCR, Satellite Receiver and DVD 8
Content Themes 37
Contrast 32
Parental Controls menu 37
Picture Presets 32
Picture Quality menu 32
Picture Tilt 33
PIP (Picture in Picture)
Closed caption display 33
Closed caption mode 33
Explained 51
Variable Output, Speakers 31
VCR Channels 16, 35
VCR remote codes 26
Video Noise Reduction 32
Control Panels 29
D
DEMO PIN 9
DVD Channel 18, 35
61
Download from Www.Somanuals.com. All Manuals Search And Download.
Please do not send any products to the Indianapolis address listed in this manual or on the carton. This will only add delays
in service for your product.
Thomson multimedia Inc.
10330 North Meridian Street
Indianapolis, IN 46290
©2001 Thomson multimedia Inc.
Trademark(s)® Registered
Marca(s) Registrada(s)
Printed in USA
TOCOM 15719570
Download from Www.Somanuals.com. All Manuals Search And Download.
|