43-893.fm Page 1 Monday, August 16, 1999 2:23 PM
Cat. No. 43-893
OWNER’S MANUAL
Please read before using this equipment.
ET-893
Super Lightweight Headset Telephone
Download from Www.Somanuals.com. All Manuals Search And Download.
43-893.fm Page 3 Monday, August 16, 1999 2:23 PM
READ THIS BEFORE
INSTALLATION
: To reduce the risk of
WARNING
fire or shock hazard, do not ex-
pose this product to rain or mois-
ture.
We have designed your ET-893 to con-
form to federal regulations and you can
connect it to most telephone lines. How-
ever, each device you connect to the
phone line draws power from it. We refer
to this power draw as the device’s ringer
equivalence number, or REN. The REN
is on the bottom of the ET-893.
CAUTION
RISK OF ELECTRIC SHOCK.
!
DO NOT OPEN.
: TO REDUCE THE RISK OF
CAUTION
ELECTRIC SHOCK, DO NOT REMOVE
COVER OR BACK. NO USER-SERVICE-
ABLE PARTS INSIDE. REFER SERVIC-
ING TO QUALIFIED PERSONNEL.
If you use more than one telephone or
other device on the line, add up all of the
RENs. If the total is more than five, your
telephones might not ring. In rural areas,
a total REN of three might impair ringer
operation. If ringer operation is impaired,
remove a device from the line.
This symbol is intended to alert you to
the presence of uninsulated danger-
ous voltage within the product’s enclo-
sure that might be of sufficient
magnitude to constitute a risk of elec-
tric shock. Do not open the product’s
case.
This symbol is intended to inform you
that important operating and mainte-
nance instructions are included in the
FCC STATEMENT
!
Your ET-893 complies with Part 68 of
FCC Rules. You must, upon request,
provide the FCC registration number
and the REN to your phone company.
These numbers are on the bottom of the
ET-893.
literature accompanying this product.
You must not connect the headset
Note:
telephone to:
• coin-operated systems
• party-line systems
• most electronic key phone systems
3
Download from Www.Somanuals.com. All Manuals Search And Download.
43-893.fm Page 4 Monday, August 16, 1999 2:23 PM
CONTENTS
Preparation .............................................................................................................. 5
Making the Connections ..................................................................................... 5
Attaching the Headset Hanger ........................................................................... 5
Adjusting the Headset ........................................................................................ 6
Setting the Dialing Mode .................................................................................... 6
Turning the Ringer Off/On .................................................................................. 7
Using the Belt Clip .............................................................................................. 7
Operation ................................................................................................................. 8
Making/Receiving Calls ...................................................................................... 8
Using Hold .......................................................................................................... 8
Using Flash ......................................................................................................... 8
Using Redial ....................................................................................................... 9
Using Tone Services with a Pulse Line ............................................................... 9
Care and Maintenance .......................................................................................... 10
Troubleshooting ................................................................................................ 10
The FCC Wants You To Know .......................................................................... 11
Lightning ........................................................................................................... 11
4
Download from Www.Somanuals.com. All Manuals Search And Download.
43-893.fm Page 5 Monday, August 16, 1999 2:23 PM
PREPARATION
MAKING THE
ATTACHING THE
CONNECTIONS
HEADSET HANGER
1. Plug one end of the supplied modu-
lar cord into the telephone line’s
modular jack. Then plug the other
end into the ET-893’s TEL. LINE
jack.
The ET-893 comes with a headset
hanger that gives you a convenient
place to rest your headset when it is not
in use.
To attach the hanger, simply insert it into
the holes on the upper right of the head-
set amplifier.
2. Plug the headset’s mini plug into the
HEADSET jack on the right side of
the ET-893.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
43-893.fm Page 6 Monday, August 16, 1999 2:23 PM
Caution: The microphone boom
swivels on the headset. Do not bend
the microphone boom while you
adjust it.
ADJUSTING THE
HEADSET
1. Place the headset on your head with
the earpiece over either ear.
4. Attach the lapel clip to your clothing.
Leave enough slack in the cord so
you can move your head without
pulling the headset.
2. Adjust the headset band until it rests
with almost no pressure on your ear
and the top of your head.
Note: When you are not using the head-
set, place it on the headset hanger. Oth-
erwise (if you just lay it down on a flat
surface, for example), you might have to
repeat these adjustments.
SETTING THE DIALING
MODE
TONE/PULSE
Set
for the type of service
If the headset is loose, remove it
and adjust it inward slightly to
tighten it. If the headset is tight, gen-
tly pull the headset band out to
loosen it.
you have. If you are not sure which type
you have, do this simple test.
TONE/PULSE
1. Set
on the side of the
TONE
dialer to
.
3. Hold the headset in place, and
adjust the microphone boom until it
is about even with your chin. Experi-
ment until you find the most comfort-
able position.
TALK/HANG UP
2. Press
so the green
IN USE indicator lights and listen for
a dial tone.
Lapel Clip
6
Download from Www.Somanuals.com. All Manuals Search And Download.
43-893.fm Page 7 Monday, August 16, 1999 2:23 PM
3. Press any number other than 0.
USING THE BELT CLIP
If your phone system requires
Note:
Use the ET-893’s belt clip to hang the di-
aler on your waistband so you can carry
the dialer with you as you move around.
that you dial an access code (9, for
example) before you dial an outside
number, do not press the access
code either.
If the dial tone stops, you have
touch-tone service. If the dial tone
continues, you have pulse service.
4. If you have tone service, leave
TONE/PULSE set to TONE. If you
have pulse service, set TONE/
PULSE to PULSE.
Remove the headset hanger be-
fore using the belt clip.
Note:
To attach the belt clip to the ET-893,
place the belt clip in the slot, then slide it
in the direction of the arrow until it locks
into place.
TURNING THE RINGER
OFF/ON
You can set RINGER on the side of the
dialer to OFF or ON. With RINGER set to
OFF, the dialer does not ring, but you
can still make outgoing calls. If you hear
an extension telephone ring, you can
answer the incoming call on this phone.
To remove the belt clip from the ET-893,
press the belt clip’s tab and slide it off in
the direction of the arrow.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
43-893.fm Page 8 Monday, August 16, 1999 2:23 PM
OPERATION
MAKING/RECEIVING
CALLS
USING HOLD
To place a call on hold, press HOLD.
The red HOLD indicator lights to show
that the call is still on the line. To release
a call from hold, press TALK/HANG UP or
pick up an extension phone on the same
line.
1. With your headset on, press TALK/
HANG UP so the green IN USE indi-
cator lights. Then listen for the dial
tone.
Note: If you do not hear the dial
tone, hold down TALK/HANG UP for
2 seconds to reinitialize the switch-
hook function.
When you place a call on hold, you can
disconnect the headset from the dialer if
you need to step away. To continue your
conversation, simply reconnect the
headset, then press TALK/HANG UP to
release the call from hold.
2. Dial the number you want to call.
When the other party answers,
speak into the microphone in a nor-
mal voice. Adjust VOLUME to a com-
fortable listening level as the other
party speaks.
USING FLASH
FLASH provides the electronic equiva-
lent of a switchhook signal required by
some telephone services, such as Call
Waiting.
3. To end the call, press TALK/HANG
UP. The IN USE indicator turns off.
To answer a call, press TALK/HANG UP,
then speak into the microphone.
For example, if you have Call Waiting,
you can put your current call on hold and
take another incoming call by pressing
FLASH. Press FLASH again to alternate
between the two calls.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
43-893.fm Page 9 Monday, August 16, 1999 2:23 PM
Note: If you do not have any special
USING TONE SERVICES
WITH A PULSE LINE
FLASH
telephone services, pressing
during a telephone conversation might
disconnect your call.
Some special services, such as bank-
by-phone, require tone signals. If you
have pulse service, you can still use
these special tone services.
USING REDIAL
To dial the last number dialed, press
TONE/PULSE
PULSE
, press
With
set to
TALK/HANG UP
REDIAL
.
, then
at the point where tone signals are re-
quired. Any additional numbers you dial
are sent as tone signals. The phone au-
tomatically resets to pulse dialing when
you hang up.
Notes:
• If you get a busy signal, you can
REDIAL
press
again without press-
TALK/HANG UP
ing
.
• If the phone line has Call Waiting or
requires extra time to get the dial
tone, one-touch redial might not
FLASH
work. If so, press
then
REDIAL
to redial the number.
• The redial memory holds 31 digits
for tone dialing and 32 digits for
pulse dialing.
• The redial memory does not store a
FLASH
entry or any keys you
FLASH
pressed before
.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
43-893.fm Page 10 Monday, August 16, 1999 2:23 PM
CARE AND MAINTENANCE
Your RadioShack ET-893 Super Lightweight Headset Telephone is an example of
superior design and craftsmanship. The following suggestions will help you care for
the Headset Telephone so you can enjoy it for years.
Keep the headset and amplifier dry. If either gets wet, wipe it dry im-
mediately. Liquids might contain minerals that can corrode the elec-
tronic circuits.
Handle the headset and amplifier gently and carefully. Dropping
them can damage circuit boards and cases and can cause the head-
set to work improperly.
Use and store the Headset Telephone only in normal temperature
environments. Temperature extremes can shorten the life of elec-
tronic devices, damage batteries, and distort or melt plastic parts.
Keep the Headset Telephone away from dust and dirt, which can
cause premature wear of parts.
Wipe the headset and amplifier with a damp cloth occasionally to
keep them looking new. Do not use harsh chemicals, cleaning sol-
vents, or strong detergents to clean them.
Modifying or tampering with the Headset Telephone’s internal components can cause
a malfunction and might invalidate the ET-893’s warranty and void your FCC authori-
zation to operate it. If the ET-893 is not operating as it should, take it to your local Ra-
dioShack store for assistance. If the trouble is affecting the telephone lines, the
phone company can ask you to disconnect your ET-893 until you have resolved the
problem.
TROUBLESHOOTING
If the headset’s volume level drops or if the phone begins to make unusual sounds,
determine if other phones on the same line are in use. In areas with low telephone
voltage, the ET-893 might not operate when other phones on the same line are in
use. Hanging up the other phones should correct the problem.
If you still have problems, disconnect the ET-893. If other phones on the same line
operate normally, the fault is in the ET-893 or its installation. If you are unable to lo-
cate the problem, take the ET-893 to your local RadioShack store for assistance.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
43-893.fm Page 11 Monday, August 16, 1999 2:23 PM
THE FCC WANTS YOU TO
KNOW
LIGHTNING
Your telephone has built-in protection
circuits to reduce the risk of damage
from surges in telephone line and power
line current. These protection circuits
meet or exceed the FCC requirements.
However, lightning striking the tele-
phone or power lines can damage your
telephone.
In the unlikely event that your Headset
Telephone causes problems on the
phone line, the phone company can
temporarily discontinue your service. If
this happens, the phone company at-
tempts to notify you in advance. If ad-
vance notice is not practical, the phone
company notifies you as soon as possi-
ble and advises you of your right to file a
complaint with the FCC.
Lightning damage is not common. Nev-
ertheless, if you live in an area that has
severe electrical storms, we suggest
that you unplug your phone during
storms to reduce the possibility of dam-
age.
Also, the phone company can make
changes to its lines, equipment, opera-
tions, or procedures that could affect the
operation of this telephone. The tele-
phone company notifies you of these
changes in advance, so you can take
the necessary steps to prevent interrup-
tion of your telephone service.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
43-893.fm Page 12 Monday, August 16, 1999 2:23 PM
Limited One-Year Warranty
This product is warranted by RadioShack against manufacturing defects in material and workman-
ship under normal use for one (1) year from the date of purchase from RadioShack company-owned
stores and authorized RadioShack franchisees and dealers. EXCEPT AS PROVIDED HEREIN, Ra-
dioShack MAKES NO EXPRESS WARRANTIES AND ANY IMPLIED WARRANTIES, INCLUDING
THOSE OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED
IN DURATION TO THE DURATION OF THE WRITTEN LIMITED WARRANTIES CONTAINED
HEREIN. EXCEPT AS PROVIDED HEREIN, RadioShack SHALL HAVE NO LIABILITY OR RE-
SPONSIBILITY TO CUSTOMER OR ANY OTHER PERSON OR ENTITY WITH RESPECT TO ANY
LIABILITY, LOSS OR DAMAGE CAUSED DIRECTLY OR INDIRECTLY BY USE OR PERFOR-
MANCE OF THE PRODUCT OR ARISING OUT OF ANY BREACH OF THIS WARRANTY, IN-
CLUDING, BUT NOT LIMITED TO, ANY DAMAGES RESULTING FROM INCONVENIENCE, LOSS
OF TIME, DATA, PROPERTY, REVENUE, OR PROFIT OR ANY INDIRECT, SPECIAL, INCIDEN-
TAL, OR CONSEQUENTIAL DAMAGES, EVEN IF RadioShack HAS BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES.
Some states do not allow the limitations on how long an implied warranty lasts or the exclusion of in-
cidental or consequential damages, so the above limitations or exclusions may not apply to you.
In the event of a product defect during the warranty period, take the product and the RadioShack
sales receipt as proof of purchase date to any RadioShack store. RadioShack will, at its option, un-
less otherwise provided by law: (a) correct the defect by product repair without charge for parts and
labor; (b) replace the product with one of the same or similar design; or (c) refund the purchase
price. All replaced parts and products, and products on which a refund is made, become the prop-
erty of RadioShack. New or reconditioned parts and products may be used in the performance of
warranty service. Repaired or replaced parts and products are warranted for the remainder of the
original warranty period. You will be charged for repair or replacement of the product made after the
expiration of the warranty period.
This warranty does not cover: (a) damage or failure caused by or attributable to acts of God, abuse,
accident, misuse, improper or abnormal usage, failure to follow instructions, improper installation or
maintenance, alteration, lightning or other incidence of excess voltage or current; (b) any repairs
other than those provided by a RadioShack Authorized Service Facility; (c) consumables such as
fuses or batteries; (d) cosmetic damage; (e) transportation, shipping or insurance costs; or (f) costs
of product removal, installation, set-up service adjustment or reinstallation.
This warranty gives you specific legal rights, and you may also have other rights which vary from
state to state.
RadioShack Customer Relations, Dept. W, 100 Throckmorton St., Suite 600, Fort Worth, TX 76102
We Service What We Sell
3/97
RadioShack
A Division of Tandy Corporation
Fort Worth, Texas 76102
6A8
Printed in China
Download from Www.Somanuals.com. All Manuals Search And Download.
|