ET-3507
900 MHz Dual Handset Phone
with Caller ID/Call Waiting
Download from Www.Somanuals.com. All Manuals Search And Download.
Testing Stored Emergency Numbers ..................................................................................................................... 15
Caller ID Operation ..................................................................................................................................................... 16
Call Waiting ........................................................................................................................................................... 16
Caller ID Messages ............................................................................................................................................... 16
Reviewing Records ................................................................................................................................................ 16
Deleting Records ................................................................................................................................................... 17
VIP Records .......................................................................................................................................................... 17
Reviewing VIP Records .................................................................................................................................. 17
Deleting VIP Records ..................................................................................................................................... 17
Dialing a Number From a VIP or Caller ID Record ................................................................................................ 17
Storing a Caller ID/VIP Record in Memory ............................................................................................................ 17
Troubleshooting .......................................................................................................................................................... 18
Care ....................................................................................................................................................................... 18
WARNING: To reduce the risk of fire or shock hazard, do not expose this product to rain or moisture.
The lightning symbol is intended to alert you
.
to the presence of uninsulated dangerous
voltage within this product’s enclosure that
might be of sufficient magnitude to
constitute a risk of electric shock. Do not
open the product’s case.
.CAUTION..
!
RISK OF ELECTRIC SHOCK
DO NOT OPEN
The exclamation symbol is intended to
inform you that important operating and
maintenance instructions are included in the
literature accompanying this product.
CAUTION: TO REDUCE THE RISK OF
ELECTRICAL SHOCK, DO NOT REMOVE
COVER OR BACK. NO USER-
SERVICEABLE PARTS INSIDE. REFER
SERVICING TO QUALIFIED PERSONNEL.
!
3
Contents
Download from Www.Somanuals.com. All Manuals Search And Download.
ˆ Important Information
READ THIS BEFORE INSTALLATION IMPORTANT CALLER ID
INFORMATION
Your phone is ETL listed to UL standards and meets all
applicable FCC standards.
To use the phone’s Caller ID and Call Waiting features,
you must be in an area where Caller ID and Call Waiting
services are available and you must subscribe to the
services.
We have designed your telephone to conform to federal
regulations, and you can connect it to most telephone
lines. However, each device that you connect to the
telephone line draws power from the telephone line. We
refer to this power draw as the device's ringer
equivalence number, or REN. The REN is on the bottom
of your telephone’s base.
Where Caller ID is offered, one or more of the following
options are generally available:
• caller’s number only
• caller’s name only
If you use more than one phone or other device on the
line, add up all of the RENs. If the total is more than five
(three in rural areas), your telephones might not ring. If
ringer operation is impaired, remove a device from the
line.
• caller’s name and number
For the phone’s Caller ID memory dial feature to operate,
you must receive the caller’s number.
Your telephone operates on standard radio frequencies
as allocated by the FCC. Even though the access
protection code prevents unauthorized use of your phone
line, it is possible for other radio units operating on similar
frequencies within a certain area to unintentionally
intercept your conversations and/or cause interference.
This lack of privacy can occur with any cordless phone.
4
Important Information
Download from Www.Somanuals.com. All Manuals Search And Download.
ˆ Introduction
Your RadioShack ET-3507 900 MHz Dual Handset
Phone offers the latest advances in cordless phone
technology. The corded base and cordless handset
operate through one phone jack. It saves up to 35 Caller
ID records that you can review and call back using the
corded base or cordless handset.
Cordless Handset
10-Channel Auto Scan
channel when you make or answer a call.
— automatically selects a clear
Built-In Compander Noise Reduction Circuit
ensures clear and crisp conversations.
–
An FCC-compliant telephone cord with a modular plug is
provided with this equipment. This equipment is designed
to be connected to the telephone network or premises
wiring using a compatible modular jack which is FCC Part
68-compliant. See “Installing the Corded Phone” on
Page 6 for details.
Ample Talk and Standby Time
(about 12 hours), the supplied battery provides about 7
hours of talk time or 7 days of standby time.
— when fully charged
Security Access-Protection Code
cordless phone users from using your phone line.
— prevents other
This equipment is hearing aid compatible.
3-Line Backlit Display
— lets you view a caller’s name
and number on both phones’ screens.
10-Memory Speed Dial
— stores up to 10 frequently
called phone numbers for easy dialing.
Call Waiting ID
— displays Caller ID information about
an incoming call when you are on the phone (if you
subscribe to this service from your local phone
company).
VIP Memory with Distinctive Ringer
— lets you store
up to 5 records, complete with a distinctive ring for easy
identification.
Three-Way Conference
— lets you talk with someone
on an outside telephone line, the corded phone, and the
cordless handset.
Corded Phone (Base)
Hands-Free Speakerphone
– lets you talk on the phone
without picking up the handset.
RJ11C Data Port
– lets you connect the phone to a
computer modem.
Message Waiting/New Call Indicators
— let you see at
a glance that you have messages or new Caller ID
records.
Note:
You must subscribe to your phone company’s
special services in order to use these features.
Page/Intercom
— lets you page the cordless handset
and carry on a conversation.
Contrast Control
— lets you adjust the backlit display’s
contrast for easy viewing.
5
Introduction
Download from Www.Somanuals.com. All Manuals Search And Download.
ˆ Preparation
On a Desk
CHOOSING A LOCATION
The corded phone and cordless handset (with charging
cradle) require only one phone jack for both phones. You
can place the cordless handset and the charging cradle
anywhere in your house, such as the kitchen, workshop
or garage, without using a separate phone jack.
Desktop Stand
INSTALLING THE CORDED PHONE
1. Insert the tabs on the top of the desktop stand into
the slots on the phone’s base, then snap the stand’s
bottom tabs into place.
You can place the corded phone on a desk or table, or
mount it on a standard wall plate or directly on a wall.
Use the supplied 12V, 300-mA AC/DC adapter to power
the corded phone.
2. Plug one end of the supplied modular cord into the
TEL LINE
jack on the back of the corded phone.
Select a location that is:
3. Plug the modular cord’s other end into a modular
phone line jack.
• near an easily accessible AC outlet
• near a telephone line jack
4. Insert the supplied AC adapter’s barrel plug into the
DC 12V 300mA
jack on the back of the corded phone.
• out of the way of normal activities
5. Route the adapter’s cord through the strain relief
slot.
• away from electrical machinery, electrical
appliances, metal walls, filing cabinets, wireless
intercoms, security alarms, and room monitors. The
corded phone’s location affects the phone’s range. If
you have a choice of several locations, try each to
see which provides the best performance.
6. Plug the adapter into a standard AC outlet.
7. Lift the corded phone’s antenna to a vertical position.
Cautions:
On a Wall Plate or Wall
You must use a Class 2 power source that
supplies 12V DC and delivers at least 300
mA. Its center tip must be set to positive
1. Insert the bracket’s tabs into the corded phone’s tab
slots, then press down on the bracket’s clips and
insert them into the clip slots.
!
DC 12V
and its plug must fit the corded phone's
300mA
jack. The supplied adapter meets these
specifications. Using an adapter that does not meet
these specifications could damage the phone or the
adapter.
• Always connect the AC adapter to the phone before
you connect it to AC power. When you finish,
disconnect the adapter from AC power before you
disconnect it from the phone.
2. Plug one end of the supplied modular cord into the
TEL LINE
jack on the back of the corded phone.
Your telephone connects directly to a modular telephone
line jack. If your telephone wiring does not have a
modular jack, you can update the wiring yourself using
jacks and adapters (available at your local RadioShack
store), or have the telephone company update the wiring
for you. You must use compatible modular jacks that are
compliant with Part 68 of FCC Rules.
3. Insert the supplied AC adapter’s barrel plug into the
DC 12V 300mA
jack on the back of the corded phone.
4. Route the adapter and modular cord through the
groove on the bottom of the bracket.
5. Plug the modular cord’s other end into the wall plate
jack, then align the bracket’s keyhole slots with the
wall plate studs and slide the corded phone
downward to secure it.
Note:
The USOC number of the jack to be installed is
RJ11C (or RJ11W for a wall plate jack).
6. Plug the adapter into a standard AC outlet.
6
Preparation
Download from Www.Somanuals.com. All Manuals Search And Download.
Warning:
Do not burn or bury them.
7. Press and lift out the handset holder, turn it upside
down so its tabbed edge faces up, then slide it back
down into its slot.
Dispose of old batteries promptly and properly.
Caution:
If you do not plan to use the corded phone with
Note:
To mount the phone directly on a wall, you need
two screws (not supplied) with heads that fit into the
keyhole slots on the bracket. Follow the steps under “On
a Wall Plate or Wall” on Page 6 then apply these
additional instructions for placement on a wall.
batteries for a month, remove the batteries. Batteries can
leak chemicals that can destroy electronic parts.
INSTALLING THE CORDLESS
PHONE
1. Drill two holes 315/16 inches (100 mm) apart. Thread
a screw into each hole, letting the heads extend
about 5/16 inch (8 mm) from the wall.
You can place the cordless phone’s charging cradle on a
desk or table. Use the supplied 12V 200mA AC/DC
adapter to power the charging cradle.
2. Align the bracket’s keyhole slots with the mounting
screws and slide the corded phone downward to
secure it.
Cautions:
You must use a Class 2 power source that
supplies 12V DC and delivers at least 200
mA. Its center tip must be set to positive
!
DC 12V
and its plug must fit the charging cradle’s
200mA
jack. The supplied adapter meets these
specifications. Using an adapter that does not meet
these specifications could damage the charging
cradle or the adapter.
• Always connect the AC/DC adapter to the charging
cradle before you connect it to AC power. When you
finish, disconnect the adapter from AC power before
you disconnect it from the charging cradle.
Connecting the Corded Handset
Plug one end of the supplied coiled cord into the modular
jack on the corded phone’s side, then plug the other end
into the modular jack on the corded handset.
Plug the supplied AC/DC adapter’s barrel plug into the
DC 12V 200mA
charging cradle’s
jack, then plug the
adapter into a standard AC outlet.
Installing the Corded Phone’s Batteries
Connecting, Charging and Replacing the
Cordless Handset’s Battery Pack
Your corded phone requires 4 AAA batteries (not
supplied) for Caller ID (CID) memory backup in case of
power failure. For the best performance and longest life,
we recommend RadioShack alkaline batteries.
The cordless handset comes with a rechargeable nickel-
cadmium battery pack. You must connect the battery
pack and charge it for at least 12 hours before you use
the phone for the first time.
Cautions:
• Use only fresh batteries of the required size and
recommended type.
1. Slide off the battery compartment cover.
2. Unfasten the retainer strap and lift the battery pack
out of the compartment.
• Do not mix old and new batteries, different types of
batteries (standard, alkaline, or rechargeable), or
rechargeable batteries of different capacities.
3. Plug the battery pack’s connector into the socket in
the compartment (the connector fits only one way),
then replace the battery pack and fasten the retainer
strap.
Follow these steps to install the batteries.
1. Use a Phillips screwdriver to loosen the screw in the
battery compartment on the bottom of the corded
phone. Lift up the cover.
2. Install the batteries according to the polarity symbols
(+ and –) marked inside.
3. Replace the cover and secure it with the screw.
When there is no battery installed or the batteries are
4. Replace the cover.
low,
flashes on the display. Replace the batteries.
7
Preparation
Download from Www.Somanuals.com. All Manuals Search And Download.
To charge the battery pack, place the handset in the
charging cradle. The CHARGE indicator lights.
• Do not open or mutilate the battery pack.
• Be careful not to short the battery pack by touching
the connector’s pins with conducting materials, such
as rings, bracelets, and keys. The battery pack or
conductor might overheat and burn.
Notes:
• The CHARGE indicator lights even if the battery
pack’s connector is not plugged into the
compartment. Be sure the battery pack is properly
connected before charging.
If you have trouble replacing the battery pack, take the
phone to your local RadioShack store for assistance.
®
Important:
• Recharge the battery pack if BEM 87JJ;HO appears
and the cordless handset beeps twice every 7
seconds while you are using the phone, or if BEM
87JJ;HO appears when the phone is not in use.
The EPA certified RBRC
Battery Recycling Seal on the nickel-
cadmium (Ni-Cd) battery indicates
RadioShack is voluntarily participating in an
industry program to collect and recycle
• If the handset does not work immediately after
charging or recharging the battery pack, reset the
cordless handset’s security access-protection code.
(See “Resetting the Security Access-Protection
Code” on Page 9.)
these batteries at the end of their useful life, when taken
out of service in the United States or Canada. The RBRC
program provides a convenient alternative to placing
used Ni-Cd batteries into the trash or the municipal waste
stream, which may be illegal in your area. Please call 1-
800-THE-SHACK (1-800-843-7422) for information on
Ni-Cd battery recycling and disposal bans/restrictions in
your area. RadioShack’s involvement in this program is
part of the company’s commitment to preserving our
environment and conserving our natural resources.
• About once a month, fully discharge the battery pack
by keeping the phone off the cradle until BEM
87JJ;HO appears. Otherwise, the battery pack loses
its ability to fully recharge.
• If the CHARGE indicator does not light when you
place the handset on the charging cradle, be sure
the AC/DC adapter is correctly and securely
connected.
SETTING UP THE CORDED PHONE
Setting the Dialing Mode
• Check the charging contacts on the handset and
charging cradle. If the contacts are dirty or tarnished,
clean them with a pencil eraser.
TONE/PULSE
Set
on the side of the corded phone for the
type of service you have. If you are not sure which type
you have, do this simple test.
• If you are not going to use your phone for a month or
longer, disconnect its battery pack. This helps
increase the battery pack’s life.
TONE/PULSE
TONE
.
1. Set
2. Lift the corded handset.
3. Press any number other than .
Note:
to
0
The supplied battery pack should last about a year. If the
battery pack does not hold a charge for more than 2
hours after an overnight charge, replace it with a 3.6-volt,
600 mAh battery pack with a connector that fits the
socket in the battery compartment. You can order a
replacement battery pack through your local RadioShack
store. Install the new battery pack, place the handset in
the charging cradle, and charge the battery for 12 hours
before using it.
If your phone system requires that you dial an
9
access code ( , for example) before you dial an
outside number, do not press the access code either.
If the dial tone stops, you have touch-tone service. If
the dial tone continues, you have pulse service.
TONE/PULSE
4. If you have tone service, leave
set to
TONE
TONE/PULSE
to
. If you have pulse service, set
.
Note:
To avoid losing numbers stored in memory, you
PULSE
must install and begin charging the new battery pack
within 2 minutes of removing the old one.
5. To hang up, return the corded handset to its cradle.
Warning:
Dispose of the old battery pack promptly and
Adjusting the Display Contrast
properly. Do not burn or bury it.
You can lighten or darken the corded phone’s display
following these steps:
Cautions:
• You must use a replacement battery pack of the
same size and type.
FUNCTION
1. Hold down
until ?ý##### ?ýB9: 9EDJH7IJ
appears. ¶ indicates the level of the contrast. There
are eight levels.
• Do not dispose of the battery pack in a fire because
it might explode.
8
Preparation
Download from Www.Somanuals.com. All Manuals Search And Download.
2. Press ;
to darken the display, or :
to lighten the
need a modular cord (available at your local RadioShack
store) to connect the phone to a computer modem.
display.
Note:
The phone sounds 3 beeps when you reach
the lowest or highest contrast level.
FUNCTION
3. Press
to save the new setting and enter
the area code setting mode. 7H;7 9E:; 3 ###
appears.
DC 12V
TEL LINE
300mA Jack
Note:
In Steps 2 and 3, if you do not press a key within
12 seconds, the corded phone exits the display contrast
setup.
DATA PORT
DATA PORT
Plug one end of the modular cord into the
jack on the back of the corded phone. Plug the modular
cord’s other end into a computer modem’s telephone line
jack.
STORING YOUR AREA CODE
To dial a number from a Caller ID or VIP record (see
“Dialing a Number From a VIP or Caller ID Record” on
Page 17), you must first store your local area code in the
phone’s memory. Then, when you dial from a Caller ID or
VIP record, the system skips the area code if it matches
the one you stored.
Note:
You cannot use the data port and the telephone at
the same time.
SETTING UP THE CORDLESS
HANDSET
Note:
Do not store the area code if your area requires ten
digit dialing. Otherwise, it dials incorrectly on call back.
Resetting the Security Access-Protection
Code
Corded Phone
If the cordless handset does not work immediately after
charging or recharging the battery pack, you must reset
the security access-protection code (see “Connecting,
Charging and Replacing the Cordless Handset’s Battery
Pack” on Page 7).
When 7H;7 9E:; 3 ### appears, enter your three-digit
area code within 12 seconds. The phone beeps twice.
The area code is stored and the phone returns to standby
mode. To replace a stored area code, store a new one in
its place.
DELETE
1. Hold down
on the corded phone for until >I
Note:
down
If you are not in the Area Code setting mode, hold
H;=?IJH7J?ED appears.
FUNCTION
FUNCTION
for 2 seconds, then press
again to skip the display contrast mode. 7H;7 9E:; 3 ###
appears.
FLASH/DELETE
2. Within 12 seconds, hold down
on the
cordless handset untilý?D?J?7B?P7J?ED$$ appears.
Note:
If you wait longer than 12 seconds, the phone
Cordless Handset
exits security code setup.
#/FUNC
Press and hold
on the cordless handset until
3. Once the cordless handset successfully receives the
security code from the corded phone, the cordless
handset and the corded phone beeps twice.
9ED<?HC;: appears on both phones.
7H;7 9E:; 3 ### appears. Enter your three-digit area code
within 12 seconds. The cordless handset beeps twice.
The area code is stored and the cordless handset returns
to standby mode. To replace a stored area code, store a
new one in its place.
Using a Headset
USING THE DATA PORT
You can make or answer calls
with hands-free convenience
using an optional headset that
has a 3/32 -inch (2.5 mm) plug.
Contact your local RadioShack
store for a suitable headset.
The corded phone is equipped with an extra phone jack
that allows you to connect to a computer modem. You
To connect the headset, insert
the headset plug into the
headset jack on the cordless
handset.
9
Preparation
Download from Www.Somanuals.com. All Manuals Search And Download.
SETTING THE RINGERS
RINGER
To have the phone ring when a call comes in, set
ON
RINGER
OFF
. With
to
. To turn the ringer off, set
to
OFF
, you can still make outgoing calls. If
RINGER
set to
you hear an extension telephone ring, you can answer
the incoming call on this phone. The NEW CALL indicator
on the corded phone flashes until you answer the call.
The display lights on both the corded phone and the
cordless handset, and automatically turns off after 12
seconds.
You can adjust the base ringer’s frequency by sliding
RINGER FREQ A/B/C
on the side of the base.
SETTING THE DATE AND TIME
The phones’ dates and times are automatically updated
by the Caller ID information from the telephone company.
You cannot set the time and date manually.
Note:
If you do not apply Caller ID service, the date and
time cannot be stored.
When you first install the phone, ask someone to call
you. The phones’ dates and times are automatically
updated by the Caller ID information from the telephone
company. The dates and times are not updated when
you make a call.
Every time the phones receive calls, the dates and times
are updated by the Caller ID information from the phone
company. But if the date or time of the Caller ID
information is invalid (i.e., 28:00, or 8/32), the incorrect
date or time is not stored.
10
Preparation
Download from Www.Somanuals.com. All Manuals Search And Download.
ˆ Operation
A QUICK LOOK AT YOUR PHONE
REDIAL — To quickly redial the last number dialed, pick up the corded
handset or press SPEAKER, then press REDIAL.
To redial a busy number, press REDIAL without hanging up the phone.
appears and a dial tone sounds for about 2 seconds, then
the number automatically redials.
<B7I>
Notes:
The redial memory holds up to 32 digits, so you can redial long-distance as
well as local numbers.
The redial memory can also store tone entries and pause entries
(see “Using Tone Services on a Pulse Line” on Page 12 and “Entering a
Pause” on Page 14).
MUTE — To talk to someone else in the room
without the person on the other end of the phone
line hearing your conversation, press MUTE on
the corded phone.
again to resume your phone conversation.
appears. Press MUTE
CKJ;
FLASH — provides the electronic equivalent of a switchhook
signal for special phone services such as Call Waiting.
If you have Call Waiting, press FLASH to answer an incoming call
without disconnecting the current call.
FLASH again to return to the first call.
appears. Press
appears.
<B7I>
<B7I>
Note: If you do not have any special phone services, pressing
FLASH might disconnect your current call.
CH — If you hear interference during a call,
FLASH/DELETE —
provides the electronic
equivalent of a
switchhook signal for
special phone services
such as Call Waiting.
If you have Call Waiting,
press FLASH/DELETE
to answer an incoming
call without
repeatedly press CH on the
cordless handset to change the
channel until you hear a clear one.
disconnecting the current
REDIAL — To quickly redial the last number dialed, press TALK then REDIAL/CALL
BACK.
call.
appears.
<B7I>
Press FLASH/DELETE
again to return to the first
To redial a busy number, press REDIAL/CALL BACK without hanging up the phone.
appears and a dial tone sounds for about 2 seconds, then the
<B7I>
call.
appears.
<B7I>
number automatically redials.
Note: If you do not have
any special phone
services, pressing
FLASH/DELETE might
disconnect your current
call.
Notes:
The redial memory holds up to 32 digits, so you can redial long-distance as well as local
numbers.
The redial memory can also store tone entries and pause entries
(see “Using Tone Services on a Pulse Line” on Page 12 and “Entering a Pause” on
Page 14).
11
Operation
Download from Www.Somanuals.com. All Manuals Search And Download.
MAKING AND ANSWERING A CALL
ADJUSTING THE VOLUME
Corded Phone
Corded Phone
To make a call using the corded phone, pick up the
To adjust the corded handset’s volume, pick up the
SPEAKER
VOLUME
corded handset or press
to use the
corded handset, then repeatedly press
9. The volume level (up to 4 levels) you selected
appears. The volume level remains set after you hang
up.
8 or
speakerphone. You hear a dial tone and ;DJ;H DKC8;H 5
appears (if you are using speakerphone, the red
SPEAKER indicator also lights). Dial the desired number.
Note:
SPEAKER
,
8 or 9. The volume
When you press or #, the corded phone’s
To adjust the speakerphone’s volume, press
∗
VOLUME
display shows 7 or X respectively.
then repeatedly press
level (up to 8 levels) you selected appears. The volume
To answer a call, pick up the corded handset or press
SPEAKER
SPEAKER
level remains set after you press
again.
.
Cordless Handset
SPEAKER
To end a call, press
or return the corded
handset to its cradle.
TALK
To adjust the cordless handset’s volume, press
.
VOL/CID
Then repeatedly press
8 or 9. The volume
Note:
Even when there is an AC power failure and no
level (up to 4 levels) you selected appears. The volume
level remains set after you hang up.
battery is installed in the corded phone, you can still
make and receive calls using the corded handset. But
you cannot use the cordless handset or the
Note:
The corded phone or the cordless handset sounds
3 beeps when you reach the lowest or highest listening
level.
speakerphone, or other functions of the phone.
Cordless Handset
USING TONE SERVICES ON A
PULSE LINE
To make a call using the cordless handset, lift the
TALK
cordless handset, then press
. M7?J?D= appears.
When the cordless handset links up with the corded
phone, the channel, call duration timer and the receiver
volume level appear. You hear a dial tone. Dial the
desired number.
Some special services, such as bank-by-phone, require
tone signals. If you have pulse service, you can still use
these tone services by following these steps:
1. Dial the service’s main number.
To answer a call, lift the cordless handset, then press
TALK
.
TONE/ /VIP
2. When the service answers, press
on the
∗
TONE/
cordless handset or
on the corded phone.
Any additional numbers you dial are sent as tone
signals.
∗
TALK
To end a call, press
on its cradle.
or place the cordless handset
Notes:
3. After you complete the call, hang up the phone. The
phone automatically resets to pulse dialing.
• The call duration timer starts counting from &&0&&
when you dial the number or receive a call, and
stops counting when you hang up the phone. The
call duration appears briefly after you hang up the
phone.
USING PAGE/INTERCOM
Using the corded phone, you can send a page to the
cordless handset to locate it when it is away from the
charging cradle and not in use. You can use the corded
phone’s intercom feature to carry on a conversation with
a person using the handset.
• When you press a button, a single tone indicates
that the phone has accepted the command. Three
tones indicate that you pressed a button in error, or
there is severe interference.
To page the cordless handset, press PAGE/INTERCOM on
the corded phone. The cordless handset beeps for about
• If interference is severe, the cordless handset might
lose communication with the corded phone and the
call might disconnect. If this happens, reset the
cordless handset’s security access-protection code
(see “Resetting the Security Access-Protection
Code” on Page 9).
PAGE/INTERCOM
15 seconds. Hold down
for about 3
seconds. The cordless handset beeps for about 1
minute. F7=?D= appears on both the corded phone’s and
INTCM
the cordless handset’s displays. Press
on the
cordless handset to talk with the corded phone. The
channel, ?DJ9C and the volume level appear on both the
corded phone’s and cordless handset’s displays.
12
Operation
Download from Www.Somanuals.com. All Manuals Search And Download.
To send an intercom signal from the cordless handset to
the corded phone, press INTCM on the cordless handset.
?DJ;H9EC appears on both the corded phone’s and the
cordless handset’s displays. The corded phone beeps for
the cordless handset’s displays. The corded phone
beeps.
PAGE/INTERCOM
2. Press
on the corded phone to talk
to the cordless handset.
PAGE/INTERCOM
about 15 seconds. Press
on the corded
phone to talk with the cordless handset. The channel,
?DJ9C and the volume level appear on both the corded
phone’s and cordless handset’s displays. Pick up the
corded handset to talk if you do not want to use the
speakerphone.
TALK
3. Press
on the cordless handset to transfer the
call to the corded phone.
CONFERENCING
You can use the corded phone and the cordless handset
to talk with an outside line at the same time.
To exit the intercom mode, press PAGE/INTERCOM or
SPEAKER
INTCM
TALK
or on the
on the corded phone, or
cordless handset.
When the corded phone is in use, press TALK on the
cordless handset to start the conference call.
Note:
If an incoming call is detected while using the
intercom, the corded phone and the cordless handset
beep about once every 4 seconds and the NEW CALL
indicator on the corded phone flashes. To answer the
When the cordless handset is in use, pick up the corded
SPEAKER
handset or press
to join the conversation. 87I;
?D KI; appears on the cordless handset. >7D:I;J ?D KI;
appears on the corded phone. Both phones sound three
short beeps.
TALK
call, press SPEAKER on the corded phone or
on
the cordless handset, or pick up the corded handset.
TRANSFERRING A CALL
Between the Corded Handset and the
Speakerphone
To transfer a call from the speakerphone to the corded
phone, pick up the corded handset. The speakerphone
turns off and the call is transferred to the corded handset.
The SPEAKER indicator turns off.
To transfer a call from the corded phone to the
speakerphone, press SPEAKER. The call is transferred to
the speakerphone, and the SPEAKER indicator turns on.
Place the corded handset in its cradle.
From the Corded Phone or the
Speakerphone to the Cordless Handset
PAGE/INTERCOM
1. Press
on the corded phone to page
the cordless phone. The call is placed on hold.
F7=?D= appears on both the corded phone’s and the
cordless handset’s displays, and the cordless
handset beeps.
INTCM
2. Press
on the cordless handset to talk to the
corded phone.
SPEAKER
3. Press
on the corded phone or hang up the
corded handset to transfer the call to the cordless
handset.
From the Cordless Handset to the Corded
Phone
INTCM
1. Press
on the cordless handset to hold the call
and send an intercom signal to the corded phone.
?DJ;H9EC appears on both the corded phone’s and
13
Operation
Download from Www.Somanuals.com. All Manuals Search And Download.
ˆ Memory Operation
MEM
MEMORY
on the chosen phone again.
You can store up to 10 numbers (up to 24 digits) in each
phone’s memory.
5. Press
or
;DJ;H J;B DKC8H appears.
6. Dial the desired number (up to 24 digits).
Note:
Notes:
• To keep your accounts secure, we recommend you
do not store your personal access code for services
such as bank-by-phone in a memory location.
• If you enter ∗ or # in the stored number, the
corded phone’s display shows 7 or X (respec-
tively) instead.
• When storing numbers for special services (such as
alternate long-distance or bank-by-phone), store the
service’s main phone number in one memory
location and numbers for additional information in
other locations.
• You must press a number key within 12 seconds,
or the phone exits memory number storage setup.
MEM
MEMORY
on the chosen phone again
7. Press
or
to store the number. The cordless handset or the
corded phone sounds two long beeps.
STORING A NUMBER
MEM
MEMORY
on
1. Press
on the cordless handset or
Note:
If you hear three short beeps, the number did
the corded phone. C;CE# ## appears on the display
of the chosen phone.
not store successfully. Start again from Step 6.
8. Write down the stored name and number on the
memory label provided.
2. Within 12 seconds, press the memory location
1 0
number ( – ) where you want to store a number.
The number you entered appears.
Note:
If the low battery warning tone sounds or BEM
87JJ;HO appears on the cordless handset’s display,
recharge the battery within two minutes, or the numbers
stored in memory will be lost.
Note:
To enter a number into the tenth memory
0
location, press .
MEM
MEMORY
on the chosen phone again.
3. Press
or
Entering a Pause
;DJ;H D7C; 5 appears on the corded phone, and
;DJ;H D7C; appears on the cordless handset.
In some telephone systems, you must dial an access
9
code ( , for example) and wait for a second dial tone
4. Enter the name (up to 15 characters) using the
following table:
before you can dial an outside number. You can store the
access code with the phone number. However, if you do,
you should also store a pause after the access code to
allow the outside line time to connect. After entering the
# Presses
1
2
3
4
5
6
7
8
9
PAUSE
access code, press
REDIAL/CALL BACK
second pause.
on the corded phone or
1
2
3
4
A
B
C
(
D
E
F
)
G
H
I
J
M
N
O
;
P
T
U
V
?
W
X
Y
Z
on the cordless handset to enter a 2-
-
K
L
‘
Q
R
S
*
!
$
DIALING A NUMBER
Notes:
Corded Phone
FLASH/DELETE
• If you make a mistake, press
the cordless handset or
phone to delete a letter.
on
SPEAKER
1. Press
on the corded phone, or pick up the
DELETE
on the corded
handset. ;DJ;H DKC8;H 5 appears.
MEMORY
2. When you hear the dial tone, press
. I;B;9J
If you are using two consecutive letters that reside in
C;CE '#& appears.
FUNCTION
the same number key, press
on the
corded phone (or #
/FUNC
on the cordless handset)
between the letters. For example, for “Tammy
1 0
3. Enter the memory location number ( – ). The
memory location number appears and the phone
dials the number.
8 2 6 FUNC 6 999 1 7777 6 444 8 44
Smith,” enter
.
1 9
If you do not press any number keys ( – ) within 12
seconds, the phone exits memory number storage
setup.
MEMORY
You can also dial a stored number by pressing
,
REVIEW
then
: or ; (to display the desired number),
14
Memory Operation
Download from Www.Somanuals.com. All Manuals Search And Download.
CALL BACK
then
. The speaker turns on and dials the
messages. After you listen to all of your messages, CI=
desired number.
M7?J?D= E<< appears on the display briefly.
Note:
When you are using the phone and there is a
Cordless Handset
message waiting, C;II7=; M7?J?D= does not appear, but
the MESSAGE indicator on the corded phone flashes.
TALK
1. Press
on the cordless handset and wait for a
dial tone.
CHAIN-DIALING SERVICE
NUMBERS
MEM
#
2. Press
. C;CE ## appears.
1 0
3. Enter the memory location number ( – ). The
memory location number appears and the phone
dials the number.
For quick recall of numbers for special services (such as
alternate long distance or bank by phone), store each
group of numbers in its own memory location.
MEM
You can also dial a stored number by pressing
VOL/CID
then
When calling special services, dial the service’s main
number first. Then, at the appropriate place in the call,
8 or 9 to display the desired number, then
REDIAL/CALL BACK
pressing
number.
. The phone dials the
MEMORY
MEM
on the
press
on the corded phone or
cordless handset, then the number for the location where
the additional numbers are stored.
REVIEWING STORED NUMBERS
Note:
If you use pulse dialing, be sure you have stored a
tone entry in another memory location (see “Using Tone
Services on a Pulse Line” on Page 12).
Corded Phone
MEMORY
1 0
Press
number ( – ), or press
. Enter the desired memory location
REVIEW
: or ; to scroll
TESTING STORED EMERGENCY
NUMBERS
through the memory locations.
If you store an emergency service’s number (police
department, fire department, ambulance) and you want
to test the stored number, make the test call during the
late evening or early morning to avoid peak demand
periods. Remain on the line to explain the reason for your
call.
Cordless Handset
MEM
Press
. Enter the desired memory location number
1 0
VOL/CID
( – ), or press
8 or 9 to scroll through the
memory locations.
Note:
If the stored number is more than 15 digits, press
FUNCTION
#/FUNC
on the
on the corded phone or
cordless handset to view the remaining digits.
DELETING A STORED NUMBER
MEMORY
MEM
on the
1. Press
on the corded phone or
cordless handset, then, within 12 seconds, enter the
memory location number of the number.
DELETE
FLASH/
2. Press
on the corded phone or
DELETE
on the cordless handset. ;H7I; C;CE 5ý
appears.
DELETE
3. Within 12 seconds, press
on the corded
FLASH/DELETE
phone or
on the cordless handset
again to clear the memory. Two long beeps sound to
confirm the number is deleted.
MESSAGE WAITING
If you subscribe to a message waiting service with your
local telephone company, the MESSAGE indicator on the
corded phone flashes and C;II7=; M7?J?D= appears for
12 seconds on the corded phone’s and cordless
handset’s displays when you have a new message
waiting.
appears on the corded phone’s display. The
indicator continues to flash until you listen to all of your
15
Memory Operation
Download from Www.Somanuals.com. All Manuals Search And Download.
ˆ Caller ID Operation
If you subscribe to Caller ID service from your phone
company, the system automatically displays information
about calls you receive and stores the information in
Caller ID memory. Each phone can store up to 35
number records (the most recent is 35), replacing the
oldest call with each new one.
Display
Description
Appears if your phone company
sends information indicating that
an incoming call is long distance.
BED= :?IJ7D9;
• If the call is private and long
distance, the display toggles
between FH?L7J; and BED=
:?IJ7D9;.
The first line of the Caller ID record shows the calling
time, date and the number of calls. The second line
shows the caller’s phone number. The third line shows
the caller’s name, if available. (See “Caller ID
Messages.”)
• If the call is out of area and
long distance, the display
toggles between EKJ E<
7H;7 and BED= :?IJ7D9;.
When the corded phone rings, the NEW CALL indicator
flashes, and D;M appears. The latest Caller ID record
appears on both phones, and D;M 97BB ç or H;FJ remains
on the display after the last incoming call.
• If the caller’s name is
available and the call is out of
area and long distance, the
display toggles between the
caller’s name and BED=
:?IJ7D9;.
CALL WAITING
If you subscribe to Call Waiting and a call comes in while
you are on the phone, you hear a tone that indicates you
have another call. The system displays the Caller ID/Call
Waiting information for about 12 seconds, then stores the
information.
The call was forwarded from a
number set up to forward all calls.
The display toggles between the
caller’s name and 97BB <EHM7H:.
97BBý<EHM7H:
97BBý<M:ý8KIO
FLASH
To answer the incoming call, press
on the corded
on the cordless phone. <B7I>ý
appears. To resume the previous conversation, press
The call was forwarded from a
number set to forward a call if the
line is busy. The display toggles
between the caller’s name and
97BB <M: 8KIO.
FLASH/DELETE
phone or
FLASH
FLASH/DELETE
again.
or
Indicates the number of new calls
and all calls. NN is the number of
calls.
D;Mý3ýNNý
JEJ7Bý3ýNN
CALLER ID MESSAGES
Display
Description
REVIEWING RECORDS
Indicates the call number.
D;M 97BBýç
Each time you receive a call, your system stores a Caller
ID record that you can review later. Each record includes:
The caller chose not to
send information.
FH?L7J;
The caller is not within a Caller ID
service area.
EKJ E< 7H;7
;D:ýE<ýB?IJ
H;FJ
• call number
Appears when you reach the last
call.
• time and date of the call
• caller’s telephone number (if available)
• caller’s name (if available)
REVIEW
Appears if you have received a
call from the same phone number
more than once.
No Caller ID data sent.
DEý:7J7
;HHEH
Repeatedly press
; on the corded phone or
VOL/CID
8 on the cordless phone to review from the first
Caller’s information was distorted
before reaching the system.
REVIEW
call forward, or press
: on the corded phone or
VOL/CID
9 on the cordless handset to review records
A message is waiting. (You must
subscribe to your phone
company’s message waiting
service to see this.)
C;II7=; M7?J?D=
from the most recent call backward.
Notes:
All new messages have been
played.
CI= M7?J?D= E<<
• The displays show the first 15 characters of the
caller’s name and the last 15 digits of the phone
number.
16
Caller ID Operation
Download from Www.Somanuals.com. All Manuals Search And Download.
• Empty Caller ID memory locations do not appear.
Deleting VIP Records
• When a repeat call is received, the old record will be
VIP
TONE/*/VIP
on the
1. Press
on the corded phone or
removed from the Caller ID List and H;FJ appears.
cordless handset. L?F appears.
• When the list is full, the oldest caller’s information is
replaced by the newest one.
REVIEW
8 or 9
2. To delete a single record, repeatedly press
VOL/CID
: or ; on the corded phone or
on the cordless handset to find the desired number,
DELETE
FLASH/
then press
DELETE
on the corded phone or
DELETING RECORDS
on the cordless handset. ;H7I; L?F 5
REVIEW
1. To delete a single record, repeatedly press
appears.
VOL/CID
: or ; on the corded phone or
8 or 9
DELETE
To delete all records, hold down
on the
on the cordless
handset. ;H7I; 7BB L?F 5 appears.
on the cordless handset to select the record you
FLASH/DELETE
corded phone or
DELETE
want to delete. Press
on the corded phone
FLASH/DELETE
or
on the cordless handset. ;H7I;ý
97BB ?: 5 appears.
DELETE
FLASH/
3. Press
on the corded phone or
DELETE
on the cordless handset again. Two long
To delete all records, hold down DELETE on the
FLASH/DELETE
beeps sound.
corded phone or
on the cordless
handset for 3 seconds. ;H7I; 7BB 5 appears.
DIALING A NUMBER FROM A VIP
OR CALLER ID RECORD
DELETE
FLASH/
2. Press
on the corded phone or
DELETE
on the cordless handset again. Two long
beeps sound upon deletion.
The system cannot dial a number if the Caller ID record
consists of a name only.
VIP RECORDS
1. Select the desired record by reviewing the Caller ID
or VIP record.
You can store up to 5 VIP Caller ID records with a
distinctive ring for each record in the corded phone and
the cordless handset.
FUNCTION
2. Repeatedly press
on the corded phone or
#/FUNC
on the cordless phone until you see the
REVIEW
1. Press
: or ; on the corded phone or
desired combination of local number, area code,
and/or long distance prefix (1).
VOL/CID
8 or 9on the cordless handset to select
the Caller ID record you want to store in the VIP
record.
Note:
If the area code is the same as the one you
stored in the phone, you do not need to dial it.
VIP
TONE/ /VIP
on the corded phone or
2. Hold down
*
CALL BACK
REDIAL/
3. Press
on the corded phone or
on the cordless handset for 2 seconds.
CALL BACK
on the cordless handset. The system
The Caller ID record is transferred to the VIP record.
dials the caller’s phone number.
L?F IJEH;: appears, and two long beeps sounds.
STORING A CALLER ID/VIP
RECORD IN MEMORY
Note:
When the VIP memory is full, L?F C;CE <KBBé
appears and you hear three short beeps. Delete some
VIP records from memory.
REVIEW
1. Press
: or ; on the corded phone or
VOL/CID
8 or 9 on the cordless handset to find the
desired caller or VIP number.
Reviewing VIP Records
VIP
TONE/*/VIP
on the
1. Press
on the corded phone or
FUNCTION
#/FUNC
on
2. Press
on the corded phone or
cordless handset. L?F appears.
the cordless handset to store the number as
specified in Step 2 of “Dialing a Number From a
Caller ID or VIP Record”.
REVIEW
2. To review from the oldest VIP record, press
VOL/CID
; on the corded phone or
cordless handset.
8 on the
MEMORY
MEM
on the
3. Press
on the corded phone or
cordless handset. I;B;9J C;CE '¶&5 appears.
REVIEW
To review from the latest VIP record, press
VOL/CID
: on the corded phone or
cordless handset.
9 on the
4. Enter the memory location number. The corded
phone or the cordless handset sounds two long
beeps.
Note:
If the handset sounds three short beeps, the
caller’s number is not stored. Start over from Step 1.
17
Caller ID Operation
Download from Www.Somanuals.com. All Manuals Search And Download.
ˆ Troubleshooting
We do not expect you have any problems with your telephone, but if you do, the following suggestions might help. If you
still have problems, check the other phones on the same line to see if they work properly. If they do, and the problem
does not seem to be with your phone service, take the phone to your local RadioShack store for assistance.
Problem
Suggestion
The cordless handset does not
work.
Move the cordless handset closer to the corded phone.
Raise the corded phone’s antenna to a vertical position.
Ensure the phone’s modular cord and the AC adapter are correctly and securely connected.
Recharge the cordless handset’s battery pack.
Reset the security access-protection code.
Call is noisy.
Keep the cordless handset and the corded phone away from interference sources such as
computers, remote control toys, wireless alarm systems, wireless intercoms and room monitors,
fluorescent lights, and electrical appliances.
If the interference is severe, turn off the interfering device.
Move the cordless handset closer to the corded phone.
CH
Hang up and redial the number. Press
to change the channel.
The range decreases.
Ensure the corded phone’s antenna is raised and is not touching a metal surface.
Recharge the cordless handset’s battery pack.
The handset battery pack does
not charge.
Check the charging contacts on the handset and base. If they are dirty, clean them with a pencil
eraser.
Be sure the battery pack is connected correctly.
Be sure the handset is properly seated on the charging cradle.
Replace the battery pack (see “Connecting, Charging and Replacing the Cordless Handset’s
Battery Pack” on Page 7).
You have an incoming call, but
do not receive any Caller ID
information.
Check that the phone is correctly and securely connected.
Check with you phone company to verify that your Caller ID service is active.
TONE/PULSE
correctly for the type of service you have (see “Setting the Dialing Mode” on
Page 8).
Can receive calls, but cannot
make calls.
Set
CARE
Keep the phone dry; if it gets wet, wipe it dry immediately.
Use and store the phone only in normal temperature
environments. Handle the phone carefully; do not drop it.
Keep the phone away from dust and dirt, and wipe it with
a damp cloth occasionally to keep it looking new.
FCC STATEMENT
Your telephone complies with Part 68 of FCC Rules. You
must, upon request, provide the FCC registration number
and the REN to your telephone company. Both numbers
are on the bottom of the telephone’s base.
Modifying or tampering with the phone’s internal
components can cause a malfunction and might
invalidate its warranty and void your FCC authorization to
operate it. If your phone is not performing as it should,
take it to your local RadioShack store for assistance. If
the trouble is affecting the telephone lines, the phone
company can ask you to disconnect your phone until you
have resolved the problem.
Note:
You must not connect your telephone to:
• coin-operated systems
• party-line systems
• most electronic key telephone systems
18
Troubleshooting
Download from Www.Somanuals.com. All Manuals Search And Download.
THE FCC WANTS YOU TO KNOW
In the unlikely event that your phone causes problems on
the phone line, the phone company can temporarily
discontinue your service. If this happens, the phone
company attempts to notify you in advance. If advance
notice is not practical, the phone company notifies you as
soon as possible and advises you of your right to file a
complaint with the FCC.
Also, the phone company can make changes to its lines,
equipment, operations, or procedures that could affect
the operation of this telephone. The telephone company
notifies you of these changes in advance, so you can
take the necessary steps to prevent interruption of your
telephone service.
This equipment complies with the limits for a Class B
digital device as specified in Part 15 of FCC Rules.
These limits provide reasonable protection against radio
and TV interference in a residential area.
However, your equipment might cause TV or radio
interference even when it is operating properly. To
eliminate interference, you can try one or more of the
following corrective measures:
• reorient or relocate the receiving antenna
• increase the distance between the equipment and
the radio or TV
• use outlets on different electrical circuits for the
equipment and the radio or TV
Consult your local RadioShack store if the problem still
exists.
Warning:
Changes or modifications to this phone not
expressly approved by the party responsible for
compliance could void the user’s authority to operate the
equipment.
LIGHTNING
Your telephone has built-in lightning protection to reduce
the risk of damage from surges in telephone line and
power line current. This lightning protection meets or
exceeds FCC requirements. However, lightning striking
the telephone or power lines can damage your
telephone.
Lightning damage is not common. Nevertheless, if you
live in an area that has severe electrical storms, we
suggest that you unplug your phone when storms
approach to reduce the possibility of damage.
19
Troubleshooting
Download from Www.Somanuals.com. All Manuals Search And Download.
Limited One-Year Warranty
This product is warranted by RadioShack against manufacturing defects in material and workman-
ship under normal use for one (1) year from the date of purchase from RadioShack company-owned
stores and authorized RadioShack franchisees and dealers. EXCEPT AS PROVIDED HEREIN, Ra-
dioShack MAKES NO EXPRESS WARRANTIES AND ANY IMPLIED WARRANTIES, INCLUDING
THOSE OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED
IN DURATION TO THE DURATION OF THE WRITTEN LIMITED WARRANTIES CONTAINED
HEREIN. EXCEPT AS PROVIDED HEREIN, RadioShack SHALL HAVE NO LIABILITY OR RE-
SPONSIBILITY TO CUSTOMER OR ANY OTHER PERSON OR ENTITY WITH RESPECT TO ANY
LIABILITY, LOSS OR DAMAGE CAUSED DIRECTLY OR INDIRECTLY BY USE OR PERFOR-
MANCE OF THE PRODUCT OR ARISING OUT OF ANY BREACH OF THIS WARRANTY, IN-
CLUDING, BUT NOT LIMITED TO, ANY DAMAGES RESULTING FROM INCONVENIENCE, LOSS
OF TIME, DATA, PROPERTY, REVENUE, OR PROFIT OR ANY INDIRECT, SPECIAL, INCIDEN-
TAL, OR CONSEQUENTIAL DAMAGES, EVEN IF RadioShack HAS BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES.
Some states do not allow limitations on how long an implied warranty lasts or the exclusion or limita-
tion of incidental or consequential damages, so the above limitations or exclusions may not apply to
you.
In the event of a product defect during the warranty period, take the product and the RadioShack
sales receipt as proof of purchase date to any RadioShack store. RadioShack will, at its option, un-
less otherwise provided by law: (a) correct the defect by product repair without charge for parts and
labor; (b) replace the product with one of the same or similar design; or (c) refund the purchase
price. All replaced parts and products, and products on which a refund is made, become the prop-
erty of RadioShack. New or reconditioned parts and products may be used in the performance of
warranty service. Repaired or replaced parts and products are warranted for the remainder of the
original warranty period. You will be charged for repair or replacement of the product made after the
expiration of the warranty period.
This warranty does not cover: (a) damage or failure caused by or attributable to acts of God, abuse,
accident, misuse, improper or abnormal usage, failure to follow instructions, improper installation or
maintenance, alteration, lightning or other incidence of excess voltage or current; (b) any repairs
other than those provided by a RadioShack Authorized Service Facility; (c) consumables such as
fuses or batteries; (d) cosmetic damage; (e) transportation, shipping or insurance costs; or (f) costs
of product removal, installation, set-up service adjustment or reinstallation.
This warranty gives you specific legal rights, and you may also have other rights which vary from
state to state.
RadioShack Customer Relations, 200 Taylor Street, 6th Floor, Fort Worth, TX 76102
12/99
A
43-3507
RadioShack Corporation
Fort Worth, Texas 76102
11A01
Printed in China
Download from Www.Somanuals.com. All Manuals Search And Download.
|