43-1245.fm Page 1 Wednesday, August 18, 1999 9:51 AM
Cat. No. 43-1245
OWNER’S MANUAL
Please read before using this equipment.
AFX-300
Deluxe Automatic
Fax/Data Switch
Download from Www.Somanuals.com. All Manuals Search And Download.
43-1245.fm Page 3 Wednesday, August 18, 1999 9:51 AM
This fax/data switch has been tested and found to comply with
applicable UL and FCC standards.
Warning: To prevent fire or shock hazard, do not expose this
product to rain or moisture.
CAUTION
RISK OF ELECTRIC SHOCK.
!
DO NOT OPEN.
: TO REDUCE THE RISK OF
CAUTION
ELECTRIC SHOCK, DO NOT REMOVE
COVER OR BACK. NO USER-SERVICE-
ABLE PARTS INSIDE. REFER SERVIC-
ING TO QUALIFIED PERSONNEL.
This symbol is intended to alert you to the presence of un-
insulated dangerous voltage within the product’s enclo-
sure that might be of sufficient magnitude to constitute a
risk of electric shock. Do not open the product’s case.
This symbol is intended to inform you that important op-
erating and maintenance instructions are included in the
literature accompanying this product.
!
3
Download from Www.Somanuals.com. All Manuals Search And Download.
43-1245.fm Page 4 Wednesday, August 18, 1999 9:51 AM
READ THIS BEFORE INSTALLING
Each device that you connect to the phone line draws power
from the phone line. We refer to this power draw as the de-
vice’s ringer equivalence number, or REN. The REN is shown
on the bottom of your AFX-300.
If you are using more than one device on the line, add up all
the RENs. If the total is more than five, your phone might not
ring and your answering machine might not answer. In rural
areas, a total REN of three might impair ringer operation. If
ringer operation is impaired, remove a device from the line.
Your AFX-300 complies with Part 68 of FCC Rules. You must,
upon request, provide the FCC registration number and the
REN to your phone company. Both numbers are shown on the
bottom of your AFX-300.
You must not connect your AFX-300 to:
• Coin-operated systems
• Party-line systems
• Most electronic key phone systems
The AFX-300 is not compatible with:
• Voice mail services
• Call forwarding services
• Call waiting services
• Fax machines or modems that have a REN greater than
2.0B.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
43-1245.fm Page 5 Wednesday, August 18, 1999 9:51 AM
CONTENTS
Installation ......................................................................... 7
Installing Back-Up Batteries .......................................... 7
Making the Connections ................................................ 9
Initializing the AFX-300/Connecting to Power ............. 13
Preparing a TAD for Use with the AFX-300 ................. 15
Setting the TAD’s Ring Number ............................. 15
Changing the Outgoing Message .......................... 15
Optional Voice Data Guard .......................................... 17
Operation ......................................................................... 18
Using a TAD with the AFX-300 .................................... 19
TAD Operation with a Fax Machine/Fax Modem ... 20
TAD Operation with a Fax Machine/Fax Modem
and a Data Modem ................................................ 21
Answering Calls in Person .......................................... 22
Letting the AFX-300 Answer Calls .............................. 23
Switching Fax Calls Manually ...................................... 24
Using a Touch-Tone Phone ................................... 24
Using a Rotary (Pulse) Phone ............................... 25
Special Features .............................................................. 26
Programming Quick Start ............................................ 27
Programming from an Extension Phone ................ 27
Programming from a Remote Phone ..................... 27
Quick Start Command Chart ................................. 28
Basic Programming Steps ........................................... 30
Programming from an Extension Phone ................ 31
Programming from a Remote Phone ..................... 32
5
Download from Www.Somanuals.com. All Manuals Search And Download.
43-1245.fm Page 6 Wednesday, August 18, 1999 9:51 AM
Program Command Descriptions ................................ 33
Changing the Access Code ................................... 34
Changing the Ring Number Setting ....................... 35
First Number Distinctive Ring ................................ 35
Second Number Distinctive Ring ........................... 36
Turn On/Off the FAX and MODEM Jacks .............. 36
Turn On/Off the TAD Jack ...................................... 37
Turn On/Off the Fax Password .............................. 38
Route Data Modem Calls to the FAX Jack ............ 39
Automatic Modem Detection (AMD) ...................... 39
Questions and Answers ................................................. 40
Care and Maintenance .................................................... 43
If You Have Problems .................................................. 44
The FCC Wants You to Know ...................................... 45
Lightning ...................................................................... 45
6
Download from Www.Somanuals.com. All Manuals Search And Download.
43-1245.fm Page 7 Wednesday, August 18, 1999 9:51 AM
INSTALLATION
Caution
: Be sure to perform the procedures in this section in
this order, otherwise the AFX-300 might not operate as ex-
pected:
1. Install batteries
2. Connect to the phone line
3. Connect your TAD, fax machine/fax modem, and/or data
modem
4. Initialize the AFX-300 and connect it to AC power
Note
: If the AFX-300’s operation becomes erratic, disconnect
it from AC power, unplug all modular connections, remove the
backup batteries, then follow all installation procedures in the
order they appear (beginning with “Installing Back-Up Batter-
ies”).
INSTALLING BACK-UP BATTERIES
Your AFX-300 requires two button-cell batteries (supplied) for
memory backup in case AC power is disconnected or fails.
1
2
OPEN
BATTERY-2X LR 44 TYPE
7
Download from Www.Somanuals.com. All Manuals Search And Download.
43-1245.fm Page 8 Wednesday, August 18, 1999 9:51 AM
Follow these steps to install the batteries.
1. Remove the battery compartment screw with a small
Phillips screwdriver, then remove the cover by sliding it in
the direction of the arrow.
2. Insert the batteries into the compartment with the posi-
tive (+) sides facing up. The POWER/IN USE indicator
turns on.
3. Replace the cover, then reinsert and tighten the screw.
Notes:
• The AFX-300’s POWER/IN USE indicator flashes slowly
during normal use. If it flashes rapidly, replace the batter-
ies. For the longest life, we recommend alkaline batter-
ies, such as Radio Shack Cat. No. 23-115.
Warning: Promptly dispose of old batteries and keep
them out of reach of young children. Swallowing a button
cell battery can be fatal.
• Before you replace the back-up batteries, you must dis-
connect the AFX-300 from AC power and unplug all
modular phone cords.
• Disconnecting AC power while the batteries are removed
resets the AFX-300’s features to their default settings
(see “Special Features” on Page 26).
8
Download from Www.Somanuals.com. All Manuals Search And Download.
43-1245.fm Page 9 Wednesday, August 18, 1999 9:51 AM
MAKING THE CONNECTIONS
Follow these steps to connect the AFX-300 to the phone line
and your answering machine (TAD), fax machine, fax modem,
and/or data modem.
1. Plug one end of the AFX-300’s modular cord into its LINE
jack, and plug the other end into your modular telephone
line jack.
MODEM
FAX
LINE
TAD
DC 12V
Notes
:
•
If your telephone line does not have a modular jack,
you must update the wiring. You can convert the wir-
ing yourself, using jacks and adapters available at
your local Radio Shack store, or you can have the
telephone company update the wiring for you. The
telephone company will charge you for the installation
of the necessary jacks. The USOC number of the jack
to be installed is RJ11C (or RJ11W for a wall plate
jack).
9
Download from Www.Somanuals.com. All Manuals Search And Download.
43-1245.fm Page 10 Wednesday, August 18, 1999 9:51 AM
•
•
If you have two phone lines and you want to connect
the AFX-300 to the second line, you must install a tri-
plex modular adapter, such as Radio Shack Cat. No.
279-469, and connect the AFX-300 to L2. Follow the
installation instructions provided with the adapter.
You can mount the AFX-300 on a standard modular
wall plate or directly on a wall using two screws (not
supplied), then connect the AFX-300 to the telephone
line using a short modular cord (not supplied).
RESET
Mounting Directly on a Wall
Mounting on a Wall Plate
2. To connect a fax machine, fax modem, or fax/data
modem, plug its modular plug into the AFX-300’s FAX
jack.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
43-1245.fm Page 11 Wednesday, August 18, 1999 9:51 AM
MODEM
FAX
LINE
TAD
DC 12V
Notes:
•
If you connected a fax/data modem (one that receives
both fax and data calls), be sure to set the AFX-300 to
route data modem calls to the FAX jack (see “Special
Features” on Page 26).
•
To ensure optimum compatibility with the AFX-300
and avoid disconnected fax calls due to lengthy con-
nection time:
—
Set the connected fax machine/fax modem’s ring
number feature to its minimum setting (typically 1
ring).
—
If the connected fax machine/fax modem has a
delayed ring (or answer) feature, turn it off or set
it to the minimum delay setting.
3. To connect a TAD to the AFX-300, plug the TAD’s modu-
lar plug into the AFX-300’s TAD jack. Also, see “Prepar-
ing a TAD for Use with the AFX-300” on Page 15.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
43-1245.fm Page 12 Wednesday, August 18, 1999 9:51 AM
MODEM
LINE
TAD
FAX
DC 12V
Notes:
•
If you connect a TAD to the AFX-300, you can connect
your telephone to the phone jack on the TAD.
•
If you do not connect a TAD to the AFX-300’s TAD
jack, you can connect your telephone’s modular plug
directly to this jack.
•
If you installed a triplex adapter, plug your TAD’s or
telephone’s modular cord into the adapter’s L1/L2
jack.
4. To connect a data modem to the AFX-300, plug the
modem’s modular plug into the AFX-300’s MODEM jack.
Note: If you connected both a TAD and a data modem to
the AFX-300, and do not subscribe to second number
distinctive ring service from your telephone company, be
sure to turn on the automatic modem detection feature
(see “Special Features” on Page 26). Otherwise, the
AFX-300 will not switch data modem calls properly.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
43-1245.fm Page 13 Wednesday, August 18, 1999 9:51 AM
INITIALIZING THE AFX-300/
CONNECTING TO POWER
Follow these steps to initialize the AFX-300 and connect it to
AC power.
Cautions
:
• Be sure you install the batteries then connect all of the
modular jacks before you connect the AFX-300 to power.
• You must follow all of these steps, in order, to initialize
your AFX-300; otherwise, it might not detect when the
batteries are low.
1
AC
ADAPTER
MODEM
LINE
TAD
FAX
DC 12V
2
1. Plug the supplied adapter’s barrel plug into the AFX-
300’s DC 12V jack.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
43-1245.fm Page 14 Wednesday, August 18, 1999 9:51 AM
2. Plug the adapter’s other end into a standard 120-volt AC
power outlet.
Caution: You must use a Class II, 120V AC/12V DC
adapter that delivers at least 400 milliamps. Its center tip
must be set to negative and its plug must correctly fit the
AFX-300’s DC 12V jack. The supplied adapter meets
these requirements. Using an adapter that does not meet
these requirements could damage the AFX-300 or the
adapter.
3. Wait about 10 seconds, then unplug the adapter’s barrel
plug from the AFX-300’s DC 12V jack.
4. Wait another 10 seconds, then reconnect the adapter’s
barrel plug to the AFX-300’s DC 12V jack.
5. Route the AC adapter cord through the AFX-300’s strain
relief slot.
AC
ADAPTER
OPEN
14
Download from Www.Somanuals.com. All Manuals Search And Download.
43-1245.fm Page 15 Wednesday, August 18, 1999 9:51 AM
PREPARING A TAD FOR USE WITH
THE AFX-300
Setting the TAD’s Ring Number
The AFX-300 is preset to direct a call to either the FAX or MO-
DEM jack after five rings. When you use a TAD with the AFX-
300, be sure the TAD is set to answer within four rings. If it is
not, either change the ring number on the TAD to 4, or change
the ring number on the AFX-300 to at least one number higher
than the TAD’s ring number (see “Special Features” on
Page 26).
Changing the Outgoing Message
Some fax machines/fax modems do not sound the tones re-
quired to make the AFX-300 automatically switch the call and
start your fax machine/fax modem (see “Switching Fax Calls
Manually” on Page 24). If you connected a TAD to the AFX-
300, we recommend you change the TAD’s outgoing message
to include instructions for callers with that type of fax machine/
fax modem, or for those callers who might want to both leave
a voice message and send a fax during the call.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
43-1245.fm Page 16 Wednesday, August 18, 1999 9:51 AM
For example:
“Hello. You have reached 555-4567. Please leave your name
and phone number at the tone, and we will return your call. If
you want to send us a fax and you have a touch-tone phone,
press one, the pound sign, then one on your telephone to ac-
tivate our fax machine, then press START on your fax machine.
Thanks for calling.”
If you also connected a data modem to the AFX-300, the mes-
sage might say:
“Hello. You have reached 555-4567. If you want to leave a
message, press any digit on your touch-tone phone, then
leave your name and phone number at the tone, and we will
return your call. Or, if you want to send us a fax and you have
a touch-tone phone, press one, the pound sign, then one on
your telephone to activate our fax machine, then press START
on your fax machine. Thanks for calling.”
Note: If your TAD’s message interferes with the AFX-300’s
operation (for example, calls are not routed properly, the TAD
records calls intended for the fax machine/fax modem, etc.),
re-record the message and speak more softly.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
43-1245.fm Page 17 Wednesday, August 18, 1999 9:51 AM
OPTIONAL VOICE DATA GUARD
If an extension telephone on the same line as the AFX-300 is
in use, the AFX-300 does not let your fax machine/fax modem
or data modem access the telephone line or interrupt the call
in progress.
However, to prevent an extension telephone (one not plugged
into the AFX-300) from interrupting a fax or data transmission
that is in progress on the same line as the AFX-300, you must
plug that extension phone into an optional voice data guard,
such as Radio Shack Cat. No. 43-107.
You can use a voice data guard for these situations:
• When you use cordless telephones, extension tele-
phones, speed dialers, computer modems, or other tele-
phone devices on the same telephone line as your fax
machine/fax modem.
• When your answering machine is too far away to easily
connect to the AFX-300’s TAD jack.
To install a voice data guard, follow its supplied instructions.
Note
: You do not need to use a voice data guard with the AFX-
300 if your TAD automatically stops the outgoing message
when you pick up an extension phone on the same line as the
TAD, and you connected the TAD to the AFX-300’s TAD jack.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
43-1245.fm Page 18 Wednesday, August 18, 1999 9:51 AM
OPERATION
An incoming call on the phone line connected to the AFX-300
can be answered in any of the following ways:
If you connected an answering machine (TAD) to the
•
•
•
AFX-300, you can let the TAD answer the call
(see
“Using a TAD with the AFX-300” on Page 19).
You can answer the call in person
by picking up any
phone on the same line as the AFX-300 (see “Answering
Calls in Person” on Page 22).
You can let the AFX-300 automatically answer the
call
(see “Letting the AFX-300 Answer Calls” on
Page 23).
Regardless of how a call is answered, if the call is from a fax
machine, fax modem, or data modem, the AFX-300 automati-
cally directs the call to the proper device. After the call ends,
the AFX-300 automatically resets to answer the next call.
Notes
:
• The POWER/IN USE indicator flashes slowly when the
AFX-300 is in use.
• If you connected both a TAD and a data modem to the
AFX-300, be sure to turn on the AFX-300’s automatic
modem detection feature (see “Automatic Modem Detec-
tion (AMD)” on Page 39).
18
Download from Www.Somanuals.com. All Manuals Search And Download.
43-1245.fm Page 19 Wednesday, August 18, 1999 9:51 AM
• If you subscribe to first number distinctive ring service
from your telephone company, the AFX-300 is preset to
automatically transfer calls to your fax machine/fax
modem, whether the call is a voice call or a call from a
fax machine/fax modem or data modem (see “First Num-
ber Distinctive Ring” on Page 35).
• If you have two phone lines and subscribe to a call roll-
over feature from your telephone company, a fax call
might roll over to the other line (the line not connected to
the AFX-300) when your fax line is busy. If this happens,
the AFX-300 cannot direct that call to your fax machine/
fax modem.
• If a caller’s fax machine does not sound fax alert (CNG)
tones (tones that indicate the incoming call is a fax call),
the AFX-300 cannot automatically switch the call to your
fax machine/fax modem, but you can switch it manually
(see “Switching Fax Calls Manually” on Page 24).
USING A TAD WITH THE AFX-300
If you connected a TAD to the AFX-300, you can let the TAD
answer calls. How the AFX-300 operates depends on whether
you connected only a fax machine/fax modem, or connected
a fax machine/fax modem and a data modem.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
43-1245.fm Page 20 Wednesday, August 18, 1999 9:51 AM
TAD Operation with a Fax Machine/Fax Modem
When the TAD answers a call, the AFX-300 listens during the
outgoing message for either fax alert tones or touch-tone com-
mands.
If the AFX-300 detects fax alert tones, it automatically dis-
connects the TAD and directs the call to your fax machine/fax
modem.
If the AFX-300 detects a preset sequence of touch-tone
commands, it either switches the call directly to your fax ma-
chine/fax modem or data modem, or is set to accept further
commands (see “Switching Fax Calls Manually” on Page 24
and “Special Features” on Page 26).
If the call is a voice call, the TAD records the caller’s mes-
sage as usual.
Notes:
• If the touch-tone sequence detected by the AFX-300
does not match one of its preset sequences, the TAD
simply records the touch-tone sounds.
• If no fax alert or touch-tones are detected and the caller
is silent, the TAD records the silence and/or hangs up.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
43-1245.fm Page 21 Wednesday, August 18, 1999 9:51 AM
TAD Operation with a Fax Machine/Fax Modem
and a Data Modem
When the TAD answers a call, the AFX-300 listens during the
first 20 seconds of the outgoing message for either fax alert
tones or touch-tone commands.
If the AFX-300 detects fax alert tones, it automatically dis-
connects the TAD and directs the call to your fax machine/fax
modem.
If the AFX-300 detects a preset sequence of touch-tone
commands, it either switches the call directly to your fax ma-
chine/fax modem or data modem, or is set to accept further
commands (see “Switching Fax Calls Manually” on Page 24
and “Special Features” on Page 26).
If the call is a voice call, the caller must enter a touch-tone
command within 20 seconds after the TAD answers to have
the call directed to the TAD so it can record the caller’s mes-
sage as usual.
If no fax alert or touch-tones are detected within 20 sec-
onds after the TAD answers, the AFX-300 automatically
switches the call to your data modem.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
43-1245.fm Page 22 Wednesday, August 18, 1999 9:51 AM
ANSWERING CALLS IN PERSON
You can answer a call in person by simply picking up any
phone on the line (including one connected to the PHONE jack
on your TAD) before the TAD or AFX-300 answers the call.
Note
: Because the AFX-300 automatically disables your fax
machine when a call is received, you cannot use its built-in
telephone (if any) to answer a call in person.
If you answer a call and the call is a voice call
, talk as usu-
al.
Note
: If you connected a TAD and a data modem to the AFX-
300, and you answered the call on a phone connected to the
TAD, you must press any touch-tone digit on the phone before
you begin the conversation. If you do not, the AFX-300 auto-
matically transfers the call to your data modem after 20 sec-
onds.
If you answer the call and hear fax alert tones
, simply hang
up the phone. The AFX-300 directs the call to your fax ma-
chine/fax modem, regardless of whether or not you hang up.
If you answer the call and hear only silence
, the call is prob-
ably from another data modem (a calling modem is silent until
prompted by your modem). To transfer the call to a connected
data modem, press 1, #, 2, listen for the modem’s signals,
then hang up the phone.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
43-1245.fm Page 23 Wednesday, August 18, 1999 9:51 AM
LETTING THE AFX-300 ANSWER
CALLS
If you did not connect a TAD, or if you turned off the connected
TAD or the AFX-300’s TAD jack (see “Special Features” on
Page 26), and you do not answer the call in person, the AFX-
300 automatically answers the call after the preset number of
rings.
Note
: The AFX-300 is preset to answer incoming calls after
five rings. To change this setting, see “Special Features” on
Page 26.
If the AFX-300 detects fax alert tones or manual fax
switching touch-tones within 5 seconds
, it automatically di-
rects the call to your fax machine or fax modem.
If the AFX-300 detects a preset sequence of touch-tone
commands within 5 seconds
, it either switches the call di-
rectly to your fax machine/fax modem or data modem, or is set
to accept further commands (see “Switching Fax Calls Manu-
ally” on Page 24 and “Special Features” on Page 26).
If the AFX-300 does not detect fax alert tones or touch-
tone commands within 5 seconds
, it automatically switches
the call to its MODEM jack, even if you did not connect a data
modem.
Note
: If you did not connect a data modem, be sure to pro-
gram the AFX-300 so it routes data modem calls to the FAX
jack (see “Special Features” on Page 26). Otherwise, some
fax calls might be disconnected.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
43-1245.fm Page 24 Wednesday, August 18, 1999 9:51 AM
SWITCHING FAX CALLS MANUALLY
Using either a touch-tone or rotary (pulse) phone, you can
manually set the AFX-300 to accept a transmission from a fax
machine that does not sound a normal fax alert tone.
Note
: The following procedures apply only to incoming faxes.
Using a Touch-Tone Phone
During your conversation or when the answering machine an-
swers a call, either you or the caller must press 1, #, then 1 on
a touch-tone key pad to activate your fax machine/fax modem.
After the code is entered, the sender of the fax must press his/
her fax machine’s SEND button, then both parties must hang
up their handsets.
Notes
:
• If either party presses a wrong key, wait about 10 sec-
onds before trying again.
• You can use your phone’s
and # keys for other func-
tions, such as computer banking, but the AFX-300 acti-
vates your fax machine/fax modem only when you press
1, #, and 1 in that order.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
43-1245.fm Page 25 Wednesday, August 18, 1999 9:51 AM
Using a Rotary (Pulse) Phone
If you are using a rotary (pulse) phone, you can activate your
fax machine/fax modem during an incoming call using a phone
on the same line as the AFX-300. Dial 3 on the extension tele-
phone to direct the incoming call to your fax machine/fax mo-
dem.
Note: You can only direct the call using an extension phone
on the same line. A caller cannot activate your fax machine/fax
modem by dialing 3 on his/her phone.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
43-1245.fm Page 26 Wednesday, August 18, 1999 9:51 AM
SPECIAL FEATURES
The AFX-300 has several special features that let you custom-
ize its operation to fit your needs. By entering a preset access
code from any touch-tone telephone — either from an exten-
sion on the same line as the AFX-300, or after calling from a
remote phone — you can do any of the following:
Change the preset access code
Change the AFX-300’s ring number setting
Turn on/off first number distinctive ring
Turn on/off second number distinctive ring
FAX
TAD
MODEM
jacks
Turn on/off the
Turn on/off the
and
jack
Turn on/off the fax password feature
FAX
Route data modem calls to the
jack
Turn on/off automatic modem detection (AMD)
For a quick-start list of programming instructions
(experi-
enced users only) and a summary of the AFX-300’s program-
ming commands, see “Programming Quick Start” on Page 27.
For detailed, step-by-step instructions
on programming the
AFX-300, see “Basic Programming Steps” on Page 30.
For a complete description of a particular feature
, see
“Program Command Descriptions” on Page 33.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
43-1245.fm Page 27 Wednesday, August 18, 1999 9:51 AM
PROGRAMMING QUICK START
This section provides a quick reference for experienced users
to start programming the AFX-300. See the “Quick Start Com-
mand Chart” on Page 28 for a list of all default settings and re-
mote commands.
Programming from an Extension Phone
1. Pick up any phone on the same line as the AFX-300.
2. Enter 1, , then your 2-digit access code (preset to 99).
3. Enter a remote command.
4. Hang up the phone.
Note
: To program another feature, repeat these steps.
Programming from a Remote Phone
1. Dial your phone number.
2. After the TAD or fax switch answers, enter 1, , then
your 2-digit access code (preset to 99).
3. Enter a remote command within 10 seconds.
4. Hang up the phone.
Note
: To program another feature, repeat these steps.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
43-1245.fm Page 28 Wednesday, August 18, 1999 9:51 AM
Quick Start Command Chart
Number of
Times the
AFX-300
Beeps
Default
Setting
You
Press
Command
Change the
99
5
1, New
Code
2
Access Code
(New code can be
from 00-99)
Change the Ring
Number Setting
(Ring number can
be from 1-7)
2, Ring
Number
2
First Number Dis-
tinctive Ring
On
Off
On
3
4
5
2 = On
3 = Off
Second Number
Distinctive Ring
2 = On
3 = Off
Turn On/Off the
FAX and MODEM
Jacks
2 = On
3 = Off
28
Download from Www.Somanuals.com. All Manuals Search And Download.
43-1245.fm Page 29 Wednesday, August 18, 1999 9:51 AM
Number of
Times the
AFX-300
Beeps
Default
Setting
You
Press
Command
Turn On/Off the
TAD Jack
On
Off
6
7
2 = On
3 = Off
Turn On/Off the
Fax Password
(The preset pass-
word, if on, is
2 = On
3 = Off
1 # 9 9
)
Route Data
Modem Calls to
the FAX Jack
Off
8
9
2 = On
3 = Off
Turn On/Off Auto- Off
matic Modem
2 = On
3 = Off
Detection (AMD)
29
Download from Www.Somanuals.com. All Manuals Search And Download.
43-1245.fm Page 30 Wednesday, August 18, 1999 9:51 AM
BASIC PROGRAMMING STEPS
The following sections provide you with the basic instructions
for programming the AFX-300’s special features from a local
(extension) or remote touch-tone phone.
Notes
:
• You must correctly enter a 2-digit access code each time
you program the AFX-300. The AFX-300’s access code
is preset to 99. To change the code or reset the AFX-300
to the default code, see “Changing the Access Code” on
Page 34.
• You can only enter one program command per call from
a remote phone or from an extension on the same line.
• Do not set the AFX-300 so both its TAD and FAX jacks
are turned off at the same time. If you do, you might not
be able to turn on either one remotely. You must use a
touch-tone phone on the same line as your AFX-300 to
turn on either jack (see “Programming from an Extension
Phone” on Page 27).
• If you connected a programmable TAD to the same line
as the AFX-300, the TAD might respond to programming
commands intended for the AFX-300. If you are using an
extension phone, disconnect or turn off the TAD during
programming, then reconnect it when you finish. If you
are using a remote phone, turn off the TAD jack before
you program the other settings (see “Turn On/Off the
TAD Jack” on Page 37).
30
Download from Www.Somanuals.com. All Manuals Search And Download.
43-1245.fm Page 31 Wednesday, August 18, 1999 9:51 AM
Programming from an Extension Phone
Note: It is not unusual to hear beeping/buzzing or the opera-
tor’s voice on the line as you program the AFX-300 from an ex-
tension phone.
1. Pick up any phone on the same line as the AFX-300,
except the built-in phone (if any) on your fax machine.
2. Press 1, , then the 2-digit access code. The AFX-300
beeps once.
Note: If you enter the access code incorrectly, simply try
again.
3. Enter a remote command by pressing
then the num-
ber(s) for the desired command. The AFX-300 beeps
either two or three times, depending on the command
you entered. See “Program Command Descriptions” on
Page 33.
Note: If you enter the programming command incor-
rectly, simply try again.
4. Hang up the phone.
Note: To program another feature, repeat these steps.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
43-1245.fm Page 32 Wednesday, August 18, 1999 9:51 AM
Programming from a Remote Phone
1. Dial the phone number of the line connected to the AFX-
300.
2. Within 10 seconds after the TAD answers, or within 5
seconds after the AFX-300 answers, press 1, , then the
2-digit access code. The AFX-300 beeps once.
Notes:
•
If the AFX-300 answers, the phone stops ringing and
you might not hear any other sound.
•
If you enter the access code incorrectly or do not enter
it in time, the AFX-300 automatically disconnects the
call. If this happens, hang up and start over again from
Step 1.
3. Enter a remote command within 10 seconds by pressing
then the number(s) for the desired command. The
AFX-300 beeps either two or three times, depending on
the command you entered. See “Program Command
Descriptions” on Page 33.
Note: If you enter the programming command incorrectly
or do not enter it in time, the AFX-300 automatically dis-
connects the call. If this happens, hang up and start over
again from Step 1.
4. Hang up the phone.
Note: To program another feature, repeat these steps.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
43-1245.fm Page 33 Wednesday, August 18, 1999 9:51 AM
PROGRAM COMMAND DESCRIPTIONS
Each of the following sections describes a different AFX-300
special feature and explains how to turn on, turn off, or change
that feature when you follow the steps listed in “Basic Pro-
gramming Instructions.” The beginning of each section in-
cludes this basic information:
Touch-Tone Command(s)
— lists the specific touch-tone
command sequence you enter to turn on, turn off, or change
that feature while programming the AFX-300.
AFX-300 Response
— tells you how the AFX-300 responds
when you correctly enter the appropriate touch-tone com-
mand sequence.
Default Setting
— lists the default setting for that feature.
Note
: For all special features except “Changing the Access
Code” and “Changing the Ring Number Setting,” the same
touch-tone command is used to both turn on and turn off that
feature. You can tell whether the feature is turned on or off by
the AFX-300’s response (two or three beeps).
33
Download from Www.Somanuals.com. All Manuals Search And Download.
43-1245.fm Page 34 Wednesday, August 18, 1999 9:51 AM
Changing the Access Code
Touch-Tone Command: 1, then any 2-digit number from
00-99
AFX-300 Response: 2 beeps
Default Setting: 99
For built-in security against accidental or unwanted changes
to its settings, the AFX-300 requires you to enter a 2-digit ac-
cess code each time you program it. The access code is pre-
set to 99, but you can change the code to one you can easily
remember.
Note: If you change the access code then forget it, you can re-
set the AFX-300 to accept the default access code of 99. To
do this, insert a small, pointed object (such as a straightened
paper clip) into RESET on the bottom of the AFX-300 and
press it gently.
O P E N
34
Download from Www.Somanuals.com. All Manuals Search And Download.
43-1245.fm Page 35 Wednesday, August 18, 1999 9:51 AM
Changing the Ring Number Setting
Touch-Tone Command:
2, then any number from 1-7
(rings)
AFX-300 Response: 2 beeps
Default Setting: 5 rings
The AFX-300 is preset to answer incoming calls after 5 rings,
but you can set it to answer after as few as 1 or as many as 7
rings. This is especially useful if you connected a TAD to the
AFX-300, or if you need time to get to the phone to answer
calls in person.
First Number Distinctive Ring
Touch-Tone Command:
3
AFX-300 Response: 2 beeps = On
3 beeps = Off
Default Setting: On
If you subscribe to first number distinctive ring service through
your phone company, the AFX-300 is preset to automatically
switch calls to your fax machine/fax modem if it detects the
first number’s distinctive ring pattern. If you subscribe to this
service but do not want the AFX-300 to transfer that number’s
calls to your fax machine/fax modem, you can turn this feature
off.
35
Download from Www.Somanuals.com. All Manuals Search And Download.
43-1245.fm Page 36 Wednesday, August 18, 1999 9:51 AM
Second Number Distinctive Ring
Touch-Tone Command:
4
AFX-300 Response: 2 beeps = On
3 beeps = Off
Default Setting: Off
If you subscribe to second number distinctive ring service
through your phone company, the AFX-300 is preset to auto-
matically switch calls to your data modem if it detects the sec-
ond number’s distinctive ring pattern. If you subscribe to this
service but do not want the AFX-300 to transfer that number’s
calls to your data modem, you can turn this feature off.
Turn On/Off the FAX and MODEM Jacks
Touch-Tone Command:
5
AFX-300 Response: 2 beeps = On
3 beeps = Off
Default Setting: On
The AFX-300 is preset to automatically switch fax or data calls
to your fax machine/fax modem or data modem, but it also lets
you turn off the FAX and MODEM jacks (together). This is use-
ful if you are expecting only voice calls, and want all calls to be
routed to the AFX-300’s TAD jack.
36
Download from Www.Somanuals.com. All Manuals Search And Download.
43-1245.fm Page 37 Wednesday, August 18, 1999 9:51 AM
Turn On/Off the TAD Jack
Touch-Tone Command:
6
AFX-300 Response: 2 beeps = On
3 beeps = Off
Default Setting: On
The AFX-300’s TAD jack is automatically turned on, so you
can easily plug in a TAD and begin using the AFX-300. If the
TAD you connected is also programmable (by touch-tones),
the AFX-300 lets you turn off its TAD jack to prevent the con-
nected TAD from answering calls (even though the TAD might
be turned on and set to answer calls) or interfering with touch-
tone commands meant for the AFX-300. You might also want
to turn off the TAD jack if you did not connect a TAD.
37
Download from Www.Somanuals.com. All Manuals Search And Download.
43-1245.fm Page 38 Wednesday, August 18, 1999 9:51 AM
Turn On/Off the Fax Password
Touch-Tone Command:
7
AFX-300 Response: 2 beeps = On
3 beeps = Off
Default Setting: Off
Preset Password (when turned on) = 1 # 9 9
The AFX-300 is preset to automatically switch incoming fax
calls to your fax machine/fax modem. For privacy or selective
use, you can set the AFX-300 to require a preset password
before it accepts fax calls.
Notes:
• If you turn on this feature, be sure to give the password
to any callers from whom you want to receive faxes.
• The caller must enter the fax password within 5 seconds
after the AFX-300 answers or within 20 seconds after the
TAD answers (if connected). Otherwise, the AFX-300
automatically transfers the call to its MODEM jack, even if
you did not connect a data modem.
• The AFX-300’s fax password is preset to 1 # 9 9. You
cannot change the password.
38
Download from Www.Somanuals.com. All Manuals Search And Download.
43-1245.fm Page 39 Wednesday, August 18, 1999 9:51 AM
Route Data Modem Calls to the FAX Jack
Touch-Tone Command:
8
AFX-300 Response: 2 beeps = On
3 beeps = Off
Default Setting: Off
The AFX-300 is preset to route incoming data modem calls to
its MODEM jack, but you can set it so both incoming fax and
data modem calls are routed only to the FAX jack. This is es-
pecially useful if you connected a combined fax/data modem
to the AFX-300.
Automatic Modem Detection (AMD)
Touch-Tone Command:
9
AFX-300 Response: 2 beeps = On
3 beeps = Off
Default Setting: Off
If you connected both a TAD and a data modem to the AFX-
300, you can turn on the AFX-300’s AMD feature so the AFX-
300 can detect an incoming data modem call and automatical-
ly switch the call to your data modem.
39
Download from Www.Somanuals.com. All Manuals Search And Download.
43-1245.fm Page 40 Wednesday, August 18, 1999 9:51 AM
QUESTIONS AND ANSWERS
Here are some common questions and answers about how
your AFX-300 operates.
What is line sharing?
Line sharing lets you use one telephone line for more than one
purpose. For example, you can use one telephone line for reg-
ular calls, fax or modem transmissions, or calls to your an-
swering machine. Line sharing eliminates the need for
additional phone lines.
How does my AFX-300 know its a fax call?
Unless you use the first number distinctive ringing feature, the
fax machine must wait for you, the TAD, or the AFX-300 to an-
swer the phone before it knows whether or not the call is a fax.
1
When a fax machine calls, it repeatedly sounds a /2-second
tone followed by a 3-second pause on the phone line (fax alert
tone) until another fax machine responds. The AFX-300 lis-
tens for these tones.
How does my AFX-300 know its a data modem call?
Unless you use the second number distinctive ringing feature,
the data modem must wait for you, the TAD, or the AFX-300
to answer the phone before it knows whether or not the call is
a data modem. When a data modem calls, it makes no sounds
at all until your data modem sends it a signal to begin the
transmission. The AFX-300 listens for at least 20 seconds of
silence (no fax alert tones or touch-tone commands), then au-
tomatically transfers the call to your data modem.
40
Download from Www.Somanuals.com. All Manuals Search And Download.
43-1245.fm Page 41 Wednesday, August 18, 1999 9:51 AM
Can I share my residential line with my fax machine?
Yes. You can install the AFX-300 at any available modular
telephone jack on the telephone line. To prevent calls on other
extensions in your home (or office) from interrupting your fax
transmissions, we recommend you install a voice data guard
(available at you local Radio Shack store) at each extension
that shares the line with your fax machine.
Can I use the AFX-300 on a two-line system?
Yes. The AFX-300 will work on a 2-line system, if it is connect-
ed to one of those lines.
Can I still send faxes like I did before I installed the
switch?
Yes. Installing the switch does not affect outgoing fax opera-
tion.
Is there any special information I need to know about re-
ceiving faxes from a fax machine that uses auto-dial?
Yes. Auto-dialing fax machines must connect with the receiv-
ing fax machine usually within about 35 seconds. Otherwise,
the transmission ends. This means the combined number of
rings between the TAD (or AFX-300) and your fax machine/fax
modem should not exceed five rings. For safety’s sake, al-
ways set your fax machine/fax modem to its lowest ring delay
and/or ring number setting. Also, if you frequently receive fax
calls from overseas, you must allow extra time for the call to
connect (which means using an even lower number of com-
bined rings).
41
Download from Www.Somanuals.com. All Manuals Search And Download.
43-1245.fm Page 42 Wednesday, August 18, 1999 9:51 AM
Does the AFX-300 work with an answering machine that
has a toll-saver feature?
Yes, but auto-dialing fax machines must connect with the re-
ceiving fax machine usually within about 35 seconds. Other-
wise, the transmission ends. This means that if the toll-saver
feature requires four rings, you must set the fax machine to re-
spond in one ring.
Does the AFX-300 work with the call-forwarding feature
from my phone company?
No. If you have forwarded your phone to another number, in-
coming fax calls never reach your AFX-300 because the calls
are switched at the telephone company’s central office.
Does the AFX-300 work with the call-waiting feature from
my phone company?
Yes, but the call-waiting signal might distort an incoming or
outgoing fax or data transmission. Some telephone systems
let you temporarily turn off the call-waiting feature by dialing a
special code. You might want to do that if you send or expect
to receive an important fax call. Ask your telephone company
if it offers this feature.
42
Download from Www.Somanuals.com. All Manuals Search And Download.
43-1245.fm Page 43 Wednesday, August 18, 1999 9:51 AM
CARE AND MAINTENANCE
Your Radio Shack AFX-300 Deluxe Automatic Fax/Data
Switch is an example of superior design and craftsmanship.
The following suggestions will help you care for the AFX-300
so you can enjoy it for years.
• Keep the AFX-300 dry. If it gets wet, wipe it dry immedi-
ately. Liquids can contain minerals that corrode elec-
tronic circuits.
• Use and store the AFX-300 only in normal temperature
environments. Temperature extremes can shorten the
life of electronic devices and distort or melt plastic parts.
• Handle the AFX-300 gently and carefully. Dropping it can
damage circuit boards and cases and can cause the
AFX-300 to work improperly.
• Keep the AFX-300 away from dust and dirt, which can
cause premature wear of parts.
• Wipe the AFX-300 with a damp cloth occasionally to
keep it looking new. Do not use harsh chemicals, clean-
ing solvents, or strong detergents to clean your AFX-300
Modifying or tampering with the AFX-300’s internal compo-
nents can cause a malfunction and invalidate its warranty and
void your FCC authorization to use it. If your AFX-300 is not
performing as it should, take it to your local Radio Shack store
for assistance. If the trouble is harming the telephone lines,
the telephone company might ask you to disconnect your
AFX-300 until you have resolved the problem.
43
Download from Www.Somanuals.com. All Manuals Search And Download.
43-1245.fm Page 44 Wednesday, August 18, 1999 9:51 AM
IF YOU HAVE PROBLEMS
If your AFX-300 does not work or works poorly, check the con-
nection to the telephone line. If the reception is noisy when
you make a call, hang up the phone’s handset. Then pick up
the handset and redial the number.
If a power failure occurs while your fax machine/fax modem is
operating, the AFX-300 might not operate properly when pow-
er is restored. If this happens, follow these steps to reset the
AFX-300.
1. Unplug the adapter’s barrel plug from the AFX-300’s DC
12V jack.
2. Wait about 10 seconds, then reconnect the adapter’s
barrel plug to the AFX-300’s DC 12V jack.
Note
: If the AFX-300 still does not work properly, disconnect it
from AC power, unplug all modular connections, remove the
backup batteries, then follow all installation procedures in or-
der (see “Installation” on Page 7).
If the AFX-300 does not transfer calls to your fax machine/fax
modem or data modem, the phone line voltage might be too
low. Normal phone line voltage is 48 volts DC. The AFX-300
operates with voltage down to about 43 volts DC. If the phone
line’s voltage is below 43 volts DC, your AFX-300 might not
operate properly. Check with your phone company if you think
you have this problem.
44
Download from Www.Somanuals.com. All Manuals Search And Download.
43-1245.fm Page 45 Wednesday, August 18, 1999 9:51 AM
THE FCC WANTS YOU TO KNOW
In the unlikely event that your AFX-300 causes problems on
the phone line, the phone company can disconnect your ser-
vice. The phone company attempts to notify you in advance. If
advance notice is not practical, the phone company notifies
you of your right to file a complaint with the FCC.
Also, the phone company can make changes to its lines,
equipment, operations, or procedures that could affect the op-
eration of your AFX-300. The phone company notifies you of
these changes in advance, so you can take steps to prevent
interruption of your phone service.
LIGHTNING
Your AFX-300 has built-in protection circuits to reduce the risk
of damage from surges in phone and power line current.
These protection circuits meet or exceed FCC requirements.
However, lightning striking the phone line or power lines can
damage your AFX-300.
Lightning damage is not common. Nevertheless, if you live in
an area that has frequent electrical storms, we suggest that
you unplug your AFX-300 during storms to reduce the possi-
bility of damage.
45
Download from Www.Somanuals.com. All Manuals Search And Download.
43-1245.fm Page 46 Wednesday, August 18, 1999 9:51 AM
NOTES
46
Download from Www.Somanuals.com. All Manuals Search And Download.
43-1245.fm Page 47 Wednesday, August 18, 1999 9:51 AM
47
Download from Www.Somanuals.com. All Manuals Search And Download.
43-1245.fm Page 48 Wednesday, August 18, 1999 9:51 AM
RADIO SHACK LIMITED WARRANTY
This telephone product is warranted against manufacturing defects in
material and workmanship for one (1) year from the date of purchase
from Radio Shack company owned stores and authorized Radio Shack
franchisees and dealers. Within this period bring your Radio Shack
sales slip as proof-of-purchase date to any Radio Shack store.
This warranty does not cover damage or failure caused by or attribut-
able to Acts of God, abuse, misuse, improper or abnormal usage, faulty
installation, improper maintenance, lightning or other incidence of
excess voltage, or any repairs other than those provided by a Radio
Shack Authorized Service Facility, or transportation costs. Radio
Shack is not responsible or liable for indirect, special, or conse-
quential damages arising out of or in connection with the use or
performance of the product or other damages with respect to loss
of property, loss of revenue or profit, or costs of removal, installa-
tion or reinstallation.
EXCEPT AS PROVIDED HEREIN, RADIO SHACK MAKES NO
EXPRESS WARRANTIES AND ANY IMPLIED WARRANTIES ARE
LIMITED IN DURATION TO THE DURATION OF THE WRITTEN LIM-
ITED WARRANTIES CONTAINED HEREIN. Some states do not allow
the limitation or exclusion of incidental or consequential damages and
some states do not allow limitation or exclusion of implied warranties;
therefore, the aforesaid limitation(s) or exclusion(s) may not apply to
the purchaser. There will be charges rendered for repairs to the product
made after the expiration of the aforesaid one (1) year warranty period.
This warranty gives you specific legal rights and you may also have other rights
which vary from state to state.
We Service What We Sell
9/94
RADIO SHACK
A Division of Tandy Corporation
Fort Worth, Texas 76102
Printed in Hong Kong
Download from Www.Somanuals.com. All Manuals Search And Download.
|