Shielded 2-Way Center Channel Speaker
Your RCA PRO-LS200 Shielded 2-Way
Center Channel Speaker is designed
Speaker Placement
around two shielded 3 × 5-inch woofers
and a /2-inch polycarbonate ferrofluid
Where and how you position speakers
has a great effect on the overall sound of
your surround sound system.
1
cooled tweeter. The compact two-way
speaker comes with an easy-to-attach
stand, so you can place it directly on your
TV’s cabinet top, or directly above or
below the TV on an entertainment unit
shelf. The speaker can handle up to 100
watts RMS/200 watts maximum, and is
compatible with most Dolby Pro Logic‚
and Dolby Digital‚ receivers.
The PRO-LS200 projects sound in the
direction it is facing. Once you mount the
speaker, adjust the stand so the speaker
faces your viewing location. (For
example, if the speaker is above ear level,
aim the speaker down to where you plan
to be sitting, so the sound hits you
directly.)
The PRO-LS200 is specifically designed
for use with the PRO-LS100 Mini Home
Theater Satellite Speakers as part of a
complete Home Theater speaker system.
The LS200 is timbre-matched with the
satellite speakers for a seamless transition
when sound moves from speaker to
speaker. (You can also use the LS200 as a
front or rear satellite speaker.)
When the LS100s and the LS200 are used
with a subwoofer, the result is a dynamic
sound experience, ranging from 42 Hz to
20 kHz.
Cautions:
• Place speakers away from heat
sources such as radiators, stoves, or
other appliances.
Note: You need speaker wire (not
supplied) to connect your speaker (see
“Connecting the Speaker to an Amplifier/
Receiver” on Page 2).
• To prevent the cabinets from warping
or discoloring, do not place speakers
where they are exposed to direct
sunlight or excessive humidity.
© 2002 RadioShack Corporation.
All Rights Reserved.
Download from Www.Somanuals.com. All Manuals Search And Download.
Note: For the best overall performance,
connect your speaker so it is in phase
positive to positive (+ to +) and negative
to negative (– to –).
theamplifier’s positive (+) center
terminal.
Black Terminal
(–)
1. With the speaker in its approximate
location, measure the distance to the
amplifier and route the wire from the
speaker to the amplifier.
2. Separate the wire conductors for a
length of about 2 inches, then
remove about 1/2 inch of insulation
from the wire’s ends using a wire
stripper.
Red Terminal
(+)
Care
1/2''
Keep the PRO-LS200 dry; if it gets wet,
wipe it dry immediately. Use and store
the speaker only in normal temperature
environments. Handle the PRO-LS200
carefully; do not drop it. Keep the PRO-
LS200 away from dust and dirt, and wipe
it with a damp cloth occasionally to keep
it looking new. Modifying or tampering
with the PRO-LS200’s internal
3. Press the speaker’s black negative (–)
terminal tab and insert one of the
bare wire ends into the opening.
Then release the tab.
4. Press the speaker’s red positive (+)
terminal tab and insert the other bare
wire end into the opening. Then
release the tab.
components can cause a malfunction and
might invalidate its warranty
Caution: You might permanently damage
your speakers by cleaning them with a
vacuum cleaner. Use a feather duster or a
soft loose cloth instead.
5. Connect the other end of the wire
from the speaker’s black terminal to
the amplifier’s negative center (–)
terminal, and the wire from the
speaker’s red terminal to
This speaker has been manufactured to
the specifications of RadioShack and is
covered by a limited warranty from
RadioShack. If your receiver is not
operating as it should, take it to your local
RadioShack store or call 1-800-THE-
SHACK for assistance.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
Speaker Complement
Woofer: ....................................................................... Two 3 × 5-inch Shielded Woofers
1
Tweeter:.................................................................................. /2-inch Ferrofluid Tweeter
Impedance .......................................................................................... Nominal 8 Ohms
Frequency Response .............................................................................. 120 Hz–20 kHz
Power Handling (RMS) .................................................................................... 100Watts
Maximum Power ............................................................................................ 200 Watts
Sensitivity .............................................................................................................. 87 dB
Dimensions (H × W × D):
Speaker ................................................................................ 3.88 × 16.13 × 5.91 Inches
(98.6 × 409.7 × 150.11 mm)
Weight ...............................................................................Speaker: 4 lbs 2.8 oz (1.9 kg)
Specifications are typical; individual units might vary. Specifications are subject to
change and improvement without notice.
Limited Five-Year Warranty
This product is warranted by RadioShack against manufacturing defects in material and workmanship under normal use for five
(5) years from the date of purchase from RadioShack company-owned stores and authorized RadioShack franchisees and
dealers. EXCEPT AS PROVIDED HEREIN, RadioShack MAKES NO EXPRESS WARRANTIES AND ANY IMPLIED WAR-
RANTIES, INCLUDING THOSE OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED IN
DURATION TO THE DURATION OF THE WRITTEN LIMITED WARRANTIES CONTAINED HEREIN. EXCEPT AS PROVIDED
HEREIN, RadioShack SHALL HAVE NO LIABILITY OR RESPONSIBILITY TO CUSTOMER OR ANY OTHER PERSON OR
ENTITY WITH RESPECT TO ANY LIABILITY, LOSS OR DAMAGE CAUSED DIRECTLY OR INDIRECTLY BY USE OR PER-
FORMANCE OF THE PRODUCT OR ARISING OUT OF ANY BREACH OF THIS WARRANTY, INCLUDING, BUT NOT LIM-
ITED TO, ANY DAMAGES RESULTING FROM INCONVENIENCE, LOSS OF TIME, DATA, PROPERTY, REVENUE, OR
PROFIT OR ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, EVEN IF RadioShack HAS BEEN
ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
Some states do not allow limitations on how long an implied warranty lasts or the exclusion or limitation of incidental or conse-
quential damages, so the above limitations or exclusions may not apply to you.
In the event of a product defect during the warranty period, take the product and the RadioShack sales receipt as proof of pur-
chase date to any RadioShack store. RadioShack will, at its option, unless otherwise provided by law: (a) correct the defect by
product repair without charge for parts and labor; (b) replace the product with one of the same or similar design; or (c) refund
the purchase price. All replaced parts and products, and products on which a refund is made, become the property of
RadioShack. New or reconditioned parts and products may be used in the performance of warranty service. Repaired or re-
placed parts and products are warranted for the remainder of the original warranty period. You will be charged for repair or re-
placement of the product made after the expiration of the warranty period.
This warranty does not cover: (a) damage or failure caused by or attributable to acts of God, abuse, accident, misuse, improper
or abnormal usage, failure to follow instructions, improper installation or maintenance, alteration, lightning or other incidence of
excess voltage or current; (b) any repairs other than those provided by a RadioShack Authorized Service Facility; (c) consum-
ables such as fuses or batteries; (d) cosmetic damage; (e) transportation, shipping or insurance costs; or (f) costs of product re-
moval, installation, set-up service adjustment or reinstallation.
This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.
RadioShack Customer Relations, 200 Taylor Street, 6th Floor, Fort Worth, TX 76102
12/99
RadioShack Corporation
Fort Worth, Texas 76102
40-5028
02A02
Printed in USA
Download from Www.Somanuals.com. All Manuals Search And Download.
|