Radio Shack Radio TRC 511 User Guide

21-1705.fm Page 1 Thursday, September 7, 2000 10:41 AM  
TRC-511 40-Channel  
Mini-Mobile CB Radio  
with Channel 9/19 Priority Switch  
Download from Www.Somanuals.com. All Manuals Search And Download.  
21-1705.fm Page 3 Thursday, September 7, 2000 10:41 AM  
ˆ Features  
Two Ceramic Filters  
channel selectivity and prevent adjacent  
channel interference.  
Your RadioShack 40-Channel Mini-Mobile  
CB Radio is a great way to communicate  
with other CB radio operators. Because of its  
convenient compact size, you can use it al-  
most anywhere. You can mount it in a vehi-  
cle for mobile use, or in your home or office  
for use as a base station.  
— provide superior  
Universal Mounting Bracket  
mount your CB securely in your vehicle, or  
on a table or shelf in your home or office.  
— lets you  
External Antenna Jack  
— lets you attach  
Your CB has these advanced features.  
an optional antenna to your CB radio for in-  
creased range.  
Emergency Channel Switch  
— lets you  
quickly switch to channel 9 or 19 to monitor  
or report emergency situations.  
TX (Transmit) and RX (Receive) Indicators  
— light to show when the CB is transmitting  
or receiving.  
Full Legal Power  
— gives you the full range  
of CB channels with the maximum allowed  
transmit power.  
Up/Down Channel Selector  
— lets you eas-  
ily select a channel with the press of a but-  
ton.  
Adjustable Squelch  
— helps to eliminate  
noise between transmissions.  
Automatic Noise Limiter (ANL) Circuit  
reduces impulse-type noise during reception.  
5-Pin DIN Mic Connector  
— uses five  
prongs to reinforce a clear connection be-  
tween the mic and the receiver.  
Automatic Modulation  
— prevents the  
transmitter signal from over-modulating and  
distorting.  
(PLL) Frequency Synthesizer  
— provides  
highly accurate and stable tuning.  
Crystal-Controlled Digital Tuning  
—pro-  
vides precise transmission tuning capability  
when selecting a channel.  
3
Features  
Download from Www.Somanuals.com. All Manuals Search And Download.  
21-1705.fm Page 4 Thursday, September 7, 2000 10:41 AM  
FCC INFORMATION  
The Federal Communications Commission  
(FCC) does not require you to have a license  
to operate this CB radio. However, you must  
know Part 95 of FCC Rules. These rules ap-  
ply to the operation of a Class D CB. We  
have provided a copy of these regulations  
with your CB radio.  
Warning  
: Do not open your CB radio to  
make any internal adjustments. A CB radio is  
set up to transmit a regulated signal on an  
assigned frequency. It is against the law to  
alter or adjust the settings inside the unit to  
exceed these limitations.  
To be safe and sure:  
• never open your CB radio’s cases.  
• never change or replace anything in  
your CB radio.  
Your CB radio might cause TV or radio inter-  
ference even when it is operating properly.  
To determine whether your CB radio is caus-  
ing the interference, turn off your CB radio. If  
the interference goes away, your CB is caus-  
ing it. Try to eliminate the interference by:  
• moving your CB radio away from the TV  
or radio  
• contacting your local RadioShack store  
for help  
If you cannot eliminate the interference, the  
FCC requires that you stop using your CB ra-  
dio.  
This device complies with Part 15 of FCC  
Rules. Operation is subject to the following  
two conditions: 1) this device may not cause  
harmful interference, and 2) this device must  
accept any interference received, including  
interference that may cause undesired oper-  
ation.  
4
Features  
Download from Www.Somanuals.com. All Manuals Search And Download.  
21-1705.fm Page 5 Thursday, September 7, 2000 10:41 AM  
ˆ Installation  
Caution  
: Be careful not to drill into any-  
thing behind the mounting surface.  
MOUNTING THE  
MICROPHONE HOLDER  
3. Mount the holder using the machine  
screws, spring washers, plain washers  
and nuts.  
You can mount the microphone holder on ei-  
ther side of the CB or at another location  
near your receiver.  
Warning  
: Do not mount the CB microphone  
holder where it could damage or interfere  
with the operation of any passive restraint  
safety device (an air bag or seat belt).  
To mount the holder to either side of the CB,  
1
8
use the two supplied / -inch (3-mm)  
tapered-tip screws, plain washers, and  
spring washers (as shown) to secure the  
holder.  
Mounting Surface  
Note  
: If you cannot reach behind the mount-  
ing surface to attach the nuts to the machine  
1
8
screws, use the two supplied / -inch (3-mm)  
tapered-tip screws and plain washers.  
MOUNTING THE CB  
The most common mounting location for this  
CB is under a vehicle’s dashboard. However,  
if you use the CB as a base station in your  
home or office, you can place it on a desk,  
shelf, or table (see “Using the CB as a Base  
Station” on Page 7).  
To mount the holder near the receiver in an-  
other location in your vehicle (such as a  
dashboard), or somewhere in your home or  
office, such as a nearby wall, follow these  
steps.  
If you are mounting the CB in a vehicle,  
choose a location where:  
• you can easily reach the CB  
• wires and cables are clear of the vehi-  
cle’s pedals and other moving parts  
1. Using the holder as a template, mark the  
positions for the screw holes at the  
desired location.  
• the CB is not directly in front of heating  
vents  
2. At each marked position, drill a pilot hole  
slightly smaller than the mounting  
screws.  
• all wires and cables can reach their con-  
nection point  
5
Installation  
Download from Www.Somanuals.com. All Manuals Search And Download.  
21-1705.fm Page 6 Thursday, September 7, 2000 10:41 AM  
Warning  
: If you use the CB in a vehicle,  
4. Attach the CB to the mounting bracket  
using the two rubber washers and  
mounting knobs.  
mount it securely to avoid damage to the CB  
or vehicle or injury to passengers.  
Follow these steps to mount the CB using  
the supplied hardware.  
1. Using the mounting bracket as a tem-  
plate, mark the positions for the screw  
holes on the mounting surface.  
CONNECTING AN ANTENNA  
There are many different types of antennas  
for mobile CBs, each with its own benefits.  
You can choose one that best fits your  
needs, available at your local RadioShack  
store.  
2. In each marked location, drill a pilot hole  
1
Note  
: If you are using this CB as a base sta-  
5
slightly smaller than the two / -inch  
tion, see “Using the CB as a Base Station”  
on Page 7.  
(5-mm) mounting screws.  
Caution  
: Be careful not to drill into  
When you choose an antenna, keep in mind  
that, for the best performance, you should  
mount the antenna:  
objects behind the mounting surface.  
3. Mount the bracket to the mounting sur-  
1
5
face with the / -inch (5-mm) mounting  
• as high as possible on your vehicle,  
home or building  
screws, spring washers, plain washers,  
and nuts.  
Mounting  
Surface  
• as far as possible from sources of elec-  
trical noise  
• as vertically as possible  
Once you choose an antenna, follow its  
mounting instructions. Then route the cable  
ANTEN-  
to the CB and connect the cable to  
NA  
on the back of the CB.  
Note  
: If you cannot reach behind the  
mounting surface to attach the nuts on  
1
5
the bolts, use the / -inch (5-mm)  
tapered-tip screws and plain washers to  
secure the bracket.  
Antenna  
6
Installation  
Download from Www.Somanuals.com. All Manuals Search And Download.  
21-1705.fm Page 7 Thursday, September 7, 2000 10:41 AM  
Cautions  
Caution  
:
: Never pull on the microphone ca-  
ble.  
• Avoid routing the cable next to sharp  
edges or moving parts which might dam-  
age the cable.  
USING VEHICLE BATTERY  
POWER  
• Do not run the cable next to power  
cables or other radio antenna cables.  
Follow these steps to connect the CB to vehi-  
cle battery power.  
• Do not run the cable through a vehicle’s  
engine compartment or other areas that  
produce extreme heat.  
1. Connect the red wire (with in-line fuse  
holder) to a point in your vehicle’s fuse  
block that has power only when the igni-  
tion is in the ACC or ON position.  
To take advantage of your radio’s maximum  
range, adjust the antenna’s Standing Wave  
Ratio (SWR) using an SWR meter, available  
at your local RadioShack store.  
Red Wire to  
Switched ACC  
Terminal  
Follow the instructions supplied with the  
SWR meter and antenna to adjust your an-  
tenna’s SWR to the lowest possible value.  
SWR values of 2.0:1 are generally accept-  
able, with readings of 1.5:1 or lower being  
more desirable.  
2. Connect the black wire to a metal part of  
the vehicle’s frame (chassis ground).  
CONNECTING THE  
MICROPHONE  
1. Press the plastic tab on the supplied  
microphone’s plug and align the 5-pin  
DIN microphone plug with the corre-  
Black Wire to  
Ground  
MIC  
sponding pin holes in the CB’s  
jack.  
Then push the plug into the jack.  
Caution  
: Do not connect the black wire  
Tab  
to a non-metallic (plastic) part, or to any  
part insulated from the vehicle’s chassis  
by a non-metallic part.  
USING THE CB AS A BASE  
STATION  
2. Slide the microphone onto the micro-  
phone holder.  
Although this CB radio is designed mainly for  
mobile use, you can also use it as a base  
station with an AC power source. For base  
station installation, you need these items:  
To disconnect the microphone from the CB,  
press the plastic tab on the side of the plug,  
then pull out the plug.  
7
Installation  
Download from Www.Somanuals.com. All Manuals Search And Download.  
21-1705.fm Page 8 Thursday, September 7, 2000 10:41 AM  
• a 13.8V DC power supply that supplies  
at least 1.5 amps (available from  
RadioShack)  
4. Connect the CB’s red wire to the posi-  
tive (+) terminal on the DC power sup-  
ply.  
Caution  
: Most 13.8V DC power sup-  
5. Connect the DC power supply to a stan-  
dard AC outlet.  
plies plug into a standard AC outlet to  
produce DC power. Before connecting  
your CB to a 13.8V DC power supply,  
read and follow the instructions included  
with the power supply.  
Cautions  
:
• To comply with FCC RF exposure com-  
pliance requirements, maintain a dis-  
tance of at least 20 cm between this  
device’s antenna and all persons.  
• base station antenna (available from  
RadioShack)  
To prevent damage to the CB, be sure  
you connect an antenna and the micro-  
phone before you use the CB.  
• coaxial antenna cable and connector  
(available from RadioShack)  
Warning  
: Use extreme caution when you in-  
stall or remove a base station CB antenna. If  
the antenna starts to fall, let it go! It could  
contact overhead power lines. If the antenna  
touches the power line, contact with the an-  
tenna, mast, cable or guy wires can cause  
electrocution and death. Call the power com-  
pany to remove the antenna. Do not attempt  
to remove it yourself!  
Note:  
Installation instructions are for satisfy-  
ing FCC RF exposure compliance.  
Follow these steps to install the CB as a  
base station.  
Red wire to  
positive termi-  
nal of DC pow-  
er supply.  
Antenna wire  
Black wire to negative termi-  
nal of DC power supply.  
1. Mount the base station antenna as  
described in its owner’s manual.  
ANTENNA  
2. Connect the antenna to  
.
3. Connect the CB’s black power wire to  
the negative (–) terminal on the DC  
power supply.  
8
Installation  
Download from Www.Somanuals.com. All Manuals Search And Download.  
21-1705.fm Page 9 Thursday, September 7, 2000 10:41 AM  
ˆ Operation  
Before you use your CB, you should know  
how to use it effectively and courteously.  
“Operational Hints” on Page 10 contains in-  
formation that will help you get more enjoy-  
ment from your CB.  
Note  
: To receive very weak signals, turn  
SQUELCH  
counterclockwise. You hear  
noise between transmissions, but you  
also hear weak transmissions.  
VOLUME  
6. To turn off the CB, turn  
coun-  
RX and TX Indicators  
terclockwise until you hear it click. The  
channel display turns off.  
TRANSMITTING  
Note  
: We recommend you try receiving be-  
fore you transmit.  
1. Follow Steps 1–5 in “Receiving Trans-  
missions and Adjusting Squelch”.  
VOLUME  
MIC Jack  
SQUELCH  
PUSH TO TALK  
2. To transmit, press  
on  
the microphone. The red TX indicator  
lights. Hold the microphone 2–3 inches  
from your mouth and speak in a normal  
tone of voice.  
RECEIVING  
TRANSMISSIONS AND  
ADJUSTING SQUELCH  
SQUELCH  
1. Turn  
fully counterclockwise.  
VOLUME  
2. Turn on the CB by turning  
clockwise until it clicks. The channel dis-  
play lights and the channel number  
appears.  
PUSH TO TALK  
OUT CH9 CH19  
OUT  
3. Set  
to  
,
press  
or  
on the base to select  
the desired channel (other than an  
emergency channel). The green RX  
indicator lights when the CB is receiving  
transmissions.  
VOLUME  
3. To turn off the CB, turn  
coun-  
terclockwise until you hear it click. The  
channel display turns off.  
SELECTING AN  
EMERGENCY CHANNEL  
VOLUME  
4. Adjust  
level.  
to the desired listening  
Important:  
Channel 9 and channel 19 are  
5. To cut out background noise between  
transmissions, wait until there is no sig-  
reserved for motorist assistance and for re-  
porting emergency information about acci-  
dents, hazardous road conditions, and so on.  
Always give emergency messages priority.  
SQUELCH  
nal, then slowly turn  
clock-  
wise until the background noise stops  
and the RX indicator turns off.  
9
Operation  
Download from Www.Somanuals.com. All Manuals Search And Download.  
21-1705.fm Page 10 Thursday, September 7, 2000 10:41 AM  
To select an emergency channel (channel 9  
To switch back to a non-emergency channel,  
OUT CH9 CH19  
CH9  
CH19  
OUT CH9 CH19  
OUT  
to . The previously se-  
or 19), set  
to  
or  
.
set  
The selected channel number flashes.  
lected channel number appears.  
ˆ Operational Hints  
Like most activities, CB radio has its customs  
and courtesies. The following tips will help  
you get the most enjoyment from your CB.  
assistance in locating destinations. A  
CB radio is also good company on those  
“long hauls.”  
• On construction crews, a CB radio  
quickly pays for itself when you are call-  
ing for additional materials or coordinat-  
ing the activities of different work crews.  
COMMON USES FOR A CB  
Personal Uses  
• Keep in touch with home while driving to  
work, to the store, or to a social activity.  
Let your family know you are tied up in  
traffic, or that you will stop by the store  
on the way home.  
TRANSMISSION COURTESY  
Please follow these guidelines of radio cour-  
tesy when using your CB.  
• Wait for a pause in someone else’s  
transmission before you ask for a break.  
• If you are a two-car (or more) family, CB  
radios are great for communicating with  
family members while they are in their  
cars.  
• If you do not receive an answer to your  
call after a second attempt, sign off and  
wait several minutes before trying again.  
• Contact friends or neighbors — find out  
“what’s happening” or plan  
together.  
a
get-  
PUSH TO TALK  
you are not talking. (This is called dead  
keying.)  
• Do not hold down  
when  
• Ever have car trouble or run out of gas  
on the highway? What an assurance it is  
to be able to radio for assistance!  
• Assist callers with directions, information  
about road conditions, and any other  
reasonable requests.  
• Camping, fishing, and other sports are  
more fun with a CB radio. Locate a  
buddy or find out “what’s cooking” back  
at camp.  
USING COMMON 10-CODES  
Citizen’s band operators and CB radio users  
have largely adopted the 10-codes for stan-  
dard questions and answers. These codes  
permit faster communication and better intel-  
ligibility in noisy areas.  
Business Uses  
• For security officers, a CB is more than  
a convenience — it is a must for both  
safety and efficiency.  
• Truck drivers and delivery personnel can  
learn road and traffic conditions and get  
10  
Operational Hints  
Download from Www.Somanuals.com. All Manuals Search And Download.  
21-1705.fm Page 11 Thursday, September 7, 2000 10:41 AM  
This table lists codes adopted by the Associ-  
ated Public Safety Communications Officers  
(APCO).  
Code  
Meaning  
10-24  
10-25  
Assignment complete.  
Meet _____.  
Code  
Meaning  
Estimated time of arrival is  
_____.  
10-1  
10-2  
10-3  
Your signal is bad.  
Your signal is good.  
Stop transmitting.  
10-26  
10-30  
10-31  
Use caution.  
Pick up.  
Message received and under-  
stood.  
10-4  
Emergency traffic. Clear the  
channel.  
10-33  
10-5  
Relay information to _____.  
I am busy or are you busy?  
Out of service.  
10-34  
10-41  
10-62  
What time is it?  
10-6  
Switch to Channel xx.  
Cannot understand.  
10-7  
10-8  
In service.  
Note:  
Although this table lists the 10-codes’  
10-9  
Repeat last message.  
Negative (NO).  
meanings in the form of a statement, they  
can also be phrased as questions (10-6: Are  
you busy?, 10-20: What is your location?).  
10-10  
10-11  
10-12  
_____ in service.  
Stand by.  
MAXIMUM RANGE  
The maximum range and quality of CB radio  
transmissions vary depending on the follow-  
ing conditions:  
Report road/weather condi-  
tions.  
10-13  
10-14  
10-15  
10-16  
10-17  
10-18  
10-19  
10-20  
10-21  
10-22  
10-23  
Information.  
• the type and quality of antenna used  
Message delivered.  
Reply to message.  
En route.  
• the height of the antenna’s mounting  
location — the higher the antenna, the  
better the signal’s range  
• the surrounding terrain — mountains  
and tall buildings limit the range  
Urgent.  
Contact _____.  
• weather conditions  
What is your location?  
Call _____ by telephone.  
Cancel last message.  
Arrived at the scene.  
• the number of nearby radios operating  
on the same channel  
• standing wave ratio (SWR) between the  
antenna and the CB  
11  
Operational Hints  
Download from Www.Somanuals.com. All Manuals Search And Download.  
21-1705.fm Page 12 Thursday, September 7, 2000 10:41 AM  
Note  
: Your CB radio’s transmission range is  
Your local RadioShack store has a wide se-  
lection of noise-suppression accessories.  
generally line-of-sight.  
REDUCING NOISE  
Note:  
Operation instructions are for satisfy-  
ing FCC RF exposure requirements.  
Because your CB is exceptionally quiet, any  
noise you hear is probably from an external  
source in your vehicle such as an alternator,  
another radio, or spark plugs.  
The transceiver uses an ANL (Automatic  
Noise Limiter) circuit to reduce noise. How-  
ever, if possible, try to eliminate the noise by  
finding its source.  
You can determine the noise’s source by  
turning off the engine and operating the CB  
with your vehicle’s ignition set to ACC (or  
ON). If the noise is reduced, the problem is in  
your vehicle’s ignition or electrical system.  
Here are a few hints to help you reduce or  
eliminate such noise.  
• Make all CB power and antenna wires  
as short as possible.  
• Route the power wires away from the  
antenna wires.  
• Be sure that the chassis ground connec-  
tion is secure.  
• Replace old ignition wires with new,  
high-voltage, noise suppression wires.  
• Install noise suppressors on your spark  
plugs, or install new spark plugs that  
have built-in noise suppressors.  
• If problems persist, check your alterna-  
tor/generator and regulator gauges. You  
can reduce the noise from these  
sources by using bypass capacitors at  
the various output voltage points.  
12  
Operational Hints  
Download from Www.Somanuals.com. All Manuals Search And Download.  
21-1705.fm Page 13 Thursday, September 7, 2000 10:41 AM  
ˆ Troubleshooting  
If your CB is not working as it should, follow these suggestions to see if you can eliminate the  
problem. If you cannot, take the CB to your local RadioShack store for assistance.  
Symptom  
Solutions  
CB has trouble receiving.  
Rotate VOLUME clockwise so power is on.  
Make sure that the mic is connected and that the other connec-  
tions are secure.  
Make sure that the antenna is connected and that the other con-  
nections are secure.  
Check SQUELCH and adjust as needed.  
Switch to an active channel.  
Adjust VOLUME.  
CB has trouble transmitting.  
Rotate VOLUME clockwise so power is on.  
Make sure that the antenna is connected and that the other con-  
nections are secure.  
Make sure that all connections are free of corrosion. Clean and  
tighten, as necessary.  
Make sure the mic connector is not loose. Firmly press the connec-  
tor into the MIC jack.  
Switch to an active channel.  
Make sure that PUSH TO TALK is fully pressed.  
Radio does not work at all.  
Make sure that the CB is connected to power and that all connec-  
tions are secure.  
Make sure that the mic is securely connected.  
Make sure that the antenna is securely connected.  
Check the fuse and replace it, if necessary. See “Replacing the  
Fuse” on Page 14.  
Cannot select a channel.  
Set OUT CH9 CH19 to OUT. Release PUSH TO TALK.  
13  
Troubleshooting  
Download from Www.Somanuals.com. All Manuals Search And Download.  
21-1705.fm Page 14 Thursday, September 7, 2000 10:41 AM  
ˆ Care and Maintenance  
To enjoy your RadioShack 40-Channel Mini-  
Mobile CB Radio for a long time:  
2. Hold the fuse holder by both ends, push  
the ends together, twist one end coun-  
terclockwise, then pull them apart.  
• Keep the CB dry. If it gets wet, wipe it  
dry immediately.  
• Use and store the CB only in normal  
temperature environments.  
3. Remove the old fuse and inspect its  
condition. If it is not blown, reinsert it. If it  
is blown, insert a new one of the same  
type and rating.  
• Handle the CB gently and carefully. Do  
not drop it.  
• Keep the CB away from dust and dirt.  
4. Push the fuse holder ends together and  
twist one end clockwise.  
• Wipe the CB with a damp cloth occa-  
sionally to keep it looking new.  
Modifying or tampering with the CB’s internal  
components can cause a malfunction and  
might invalidate its warranty and void your  
FCC authorization to operate it. If your CB is  
not performing as it should, take it to your lo-  
cal RadioShack store for assistance.  
REPLACING THE FUSE  
The CB’s 2-A in-line fuse helps protect your  
CB (and vehicle) from power surges and  
short circuits. Replace a blown fuse with a 2-  
A, slow-blow glass fuse, available at your lo-  
cal RadioShack store.  
Caution  
: Do not use a fuse with ratings other  
than those specified here. Doing so might  
damage your CB.  
Follow these steps to check and replace the  
fuse.  
1. Make sure the power source and CB are  
both off.  
14  
Care and Maintenance  
Download from Www.Somanuals.com. All Manuals Search And Download.  
21-1705.fm Page 15 Thursday, September 7, 2000 10:41 AM  
ˆ Specifications  
Receiver  
Frequency Coverage ........................................................... All 40 channels (class D) 26.965–27.405 MHz  
Sensitivity ...................................................................................................... 0.5 uV or better for 10 dB S/N  
Squelch Sensitivity ..................................................................... From 0.5 uV to 1 mV adjustable (nominal)  
Frequency Response ............................................................................................... –6 dB 450 Hz–2.5 kHz  
Adjacent Channel Selectivity ............................................................................................... 45 dB at 10 kHz  
Audio Output Power ............................................................................................................................... 1 W  
Cross Modulation ................................................................................................................................ 50 dB  
Transmitter  
Frequency Coverage ........................................................... All 40 channels (class D) 26.965–27.405 MHz  
Frequency Tolerance ....................................................................................................... ±100 Hz (nominal)  
Output Power ...................................................................................................................... 3.6 W (nominal)  
Modulation Type ....................................................................................................................................... A3  
Antenna Impedance .............................................................................................................................. 50  
Spurious Emission .............................................................................................................. –67 dB or better  
Modulation Capability ............................................................................................................................ 90%  
Current Drain ............................................... 1.1 Amps with no modulation; 1.5 Amps with 80% modulation  
Power Requirements ......................................................................................... 13.8V DC, negative ground  
General  
Dimensions ..................................................................................................................... 57/8 × 41/4 × 13/8 in  
(150 × 108 × 35 mm)  
Weight (with microphone) ................................................................................................................. 15.4 oz  
(437 g)  
Specifications are typical, individual units might vary. Specifications are subject to change and improve-  
ment without notice.  
15  
Specifications  
Download from Www.Somanuals.com. All Manuals Search And Download.  
21-1705.fm Page 16 Thursday, September 7, 2000 10:41 AM  
Limited Ninety-Day Warranty  
This product is warranted by RadioShack against manufacturing defects in material and workman-  
ship under normal use for ninety (90) days from the date of purchase from RadioShack company-  
owned stores and authorized RadioShack franchisees and dealers. EXCEPT AS PROVIDED  
HEREIN, RadioShack MAKES NO EXPRESS WARRANTIES AND ANY IMPLIED WARRANTIES,  
INCLUDING THOSE OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE,  
ARE LIMITED IN DURATION TO THE DURATION OF THE WRITTEN LIMITED WARRANTIES  
CONTAINED HEREIN. EXCEPT AS PROVIDED HEREIN, RadioShack SHALL HAVE NO LIABIL-  
ITY OR RESPONSIBILITY TO CUSTOMER OR ANY OTHER PERSON OR ENTITY WITH RE-  
SPECT TO ANY LIABILITY, LOSS OR DAMAGE CAUSED DIRECTLY OR INDIRECTLY BY USE  
OR PERFORMANCE OF THE PRODUCT OR ARISING OUT OF ANY BREACH OF THIS WAR-  
RANTY, INCLUDING, BUT NOT LIMITED TO, ANY DAMAGES RESULTING FROM INCONVE-  
NIENCE, LOSS OF TIME, DATA, PROPERTY, REVENUE, OR PROFIT OR ANY INDIRECT,  
SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, EVEN IF RadioShack HAS BEEN AD-  
VISED OF THE POSSIBILITY OF SUCH DAMAGES.  
Some states do not allow limitations on how long an implied warranty lasts or the exclusion or limita-  
tion of incidental or consequential damages, so the above limitations or exclusions may not apply to  
you.  
In the event of a product defect during the warranty period, take the product and the RadioShack  
sales receipt as proof of purchase date to any RadioShack store. RadioShack will, at its option, un-  
less otherwise provided by law: (a) correct the defect by product repair without charge for parts and  
labor; (b) replace the product with one of the same or similar design; or (c) refund the purchase  
price. All replaced parts and products, and products on which a refund is made, become the prop-  
erty of RadioShack. New or reconditioned parts and products may be used in the performance of  
warranty service. Repaired or replaced parts and products are warranted for the remainder of the  
original warranty period. You will be charged for repair or replacement of the product made after the  
expiration of the warranty period.  
This warranty does not cover: (a) damage or failure caused by or attributable to acts of God, abuse,  
accident, misuse, improper or abnormal usage, failure to follow instructions, improper installation or  
maintenance, alteration, lightning or other incidence of excess voltage or current; (b) any repairs  
other than those provided by a RadioShack Authorized Service Facility; (c) consumables such as  
fuses or batteries; (d) cosmetic damage; (e) transportation, shipping or insurance costs; or (f) costs  
of product removal, installation, set-up service adjustment or reinstallation.  
This warranty gives you specific legal rights, and you may also have other rights which vary from  
state to state.  
RadioShack Customer Relations, 200 Taylor Street, 6th Floor, Fort Worth, TX 76102  
12/99  
We Service What We Sell  
21-1705  
AO0014ABA1  
09A00  
Printed in China  
RadioShack Corporation  
Fort Worth, Texas 76102  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Qume Printer QVT 102 User Guide
RAD Data comm Network Card LRS 24 User Guide
RCA Speaker YS1052 User Guide
Roland Stereo System S OPT User Guide
Rolls Music Mixer RP583 User Guide
Samsung Blu ray Player AK68 01942G 00 User Guide
Samsung Fax Machine SF 370 Series User Guide
Samsung Refrigerator SRG 149B User Guide
Sanyo Projector PLV Z4000 User Guide
Scag Power Equipment Lawn Mower STT61V 25KBD User Guide