Radio Shack Karaoke Machine 32 1174 A User Guide

%&)"-CTCQMG"5[UVGO  
YKVJ"$WKNV/KP"9Q"/QPKVQT  
OWNER’S MANUAL —  
Please read before using this equipment.  
Cat. No. 32-1174 A  
%106'065  
Important Safety Instructions ........ 2  
Features ........................................ 5  
A Quick Look at Your System ....... 7  
Connections .................................. 9  
Connecting Microphones ........... 9  
Connecting an Optional  
Audio Component ...................... 9  
Connecting an Optional  
Video Component ...................... 9  
Connecting to Power .................. 10  
Connecting an  
External Speaker ..................... 10  
Connecting a Stereo VCR ....... 10  
Singing Along .............................. 10  
With a CDG/CD  
or Cassette Tape ..................... 11  
With an Optional  
Audio Component .................... 12  
CDG or CD Operation ................. 12  
Playing a CDG or CD .............. 12  
Program Play ........................... 14  
Cassette Deck Operation ............ 15  
Recording Your  
Voice with Music ...................... 15  
Troubleshooting .......................... 16  
Care ............................................ 17  
Cleaning the  
Tape-Handling Parts ................ 17  
Specifications .............................. 18  
Optional Accessories ............... 18  
"+/2146#06"  
#
#
© 2002 RadioShack Corporation.  
All Rights Reserved.  
RadioShack and RadioShack.com  
are trademarks used by  
If an icon appears at the end of a paragraph, go to the box on that page  
with the corresponding icon for pertinent information.  
#
Warning  
Important  
± Note  
R
RadioShack Corporation.  
.ýCaution  
° Hint  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4. Follow Instructions — All operating and use  
instructions should be followed.  
5. Water and Moisture — Do not use this product near  
water (for example, near a bath tub, wash bowl, kitchen  
sink, or laundry tub; in a wet basement; or near a  
swimming pool; and the like).  
6. Ventilation — Slots and openings in the cabinet are  
provided for ventilation and to ensure reliable operation  
of the product and to protect it from overheating, and  
these openings must not be blocked or covered. The  
openings should never be blocked by placing the  
product on a bed, sofa, rug, or other similar surface.  
This product should not be placed in a built-in  
installation such as a bookcase or rack unless proper  
ventilation is provided or the manufacturer’s  
instructions have been adhered to.  
7. Heat — The product should be situated away from heat  
sources such as radiators, heat registers, stoves, or  
other products (including amplifiers) that produce heat.  
8. Power-Cord Protection — Power-supply cords should  
be routed so that they are not likely to be walked on or  
pinched by items placed upon or against them, paying  
particular attention to cords at plugs, convenience  
receptacles, and the point where they exit from the  
product.  
9. Attachments — Do not use attachments not  
recommended by the product manufacturer as they  
may cause hazards.  
10. Accessories — Do not place this product on an  
unstable cart, stand, tripod, bracket, or table. The  
product may fall, causing serious injury to a child or  
adult, and serious damage to the product. Use only with  
a cart, stand, tripod, bracket, or table recommended by  
the manufacturer, or sold with the product. Any  
mounting of the product should follow the  
manufacturer’s instructions, and should use a mounting  
accessory recommended by the manufacturer.  
A product and cart combination should be  
moved with care. Quick stops, excessive  
force, and uneven surfaces may cause  
the product and cart combination to  
overturn.  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
11. Lightning — For added protection for this product  
during a lightning storm, or when it is left unattended  
and unused for long periods of time, unplug it from the  
wall outlet and disconnect the antenna or cable system.  
This will prevent damage to the product due to lightning  
and power-line surges.  
12. Power Lines — An outside antenna system should not  
be located in the vicinity of overhead power lines or  
other electric light or power circuits, or where it can fall  
into such power lines or circuits. When installing an  
outside antenna system, extreme care should be taken  
to keep from touching such power lines or circuits as  
contact with them might be fatal.  
13. Servicing — Do not attempt to service this product  
yourself as opening or removing covers may expose  
you to dangerous voltage or other hazards. Refer all  
servicing to qualified service personnel.  
14. Damage Requiring Service — Unplug this product  
from the wall outlet and refer servicing to qualified  
service personnel under the following conditions: a)  
When the power-supply cord or plug is damaged, b) If  
liquid has been spilled, or objects have fallen into the  
product, c) If the product has been exposed to rain or  
water, d) If the product does not operate normally by  
following the operating instructions. Adjust only those  
controls that are covered by the operating instructions  
as an improper adjustment of other controls may result  
in damage and will often require extensive work by a  
qualified technician to restore the product to its normal  
operation, e) If the product has been dropped or  
damaged in any way, and f) When the product exhibits  
a distinct change in performance — this indicates a  
need for service.  
15. Overloading — Do not overload wall outlets, extension  
cords, or integral convenience receptacles as this can  
result in a risk of fire or electric shock.  
16. Object and Liquid Entry — Never push objects of any  
kind into this product through openings as they may  
touch dangerous voltage points or short-out parts that  
could result in a fire or electric shock. Never spill liquid  
of any kind on the product.  
17. Replacement Parts — When replacement parts are  
required, be sure the service technician has used  
replacement parts specified by the manufacturer or  
have the same characteristics as the original part.  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
Unauthorized substitutions may result in fire, electric  
shock, or other hazards.  
18. Safety Check — Upon completion of any service or  
repairs to this product, ask the service technician to  
perform safety checks to determine that the product is  
in proper operating condition.  
atures  
F
19. Wall or Ceiling Mounting — The product should be  
mounted to a wall or ceiling only as recommended by  
the manufacturer.  
20. Power Sources — This product should be operated  
only from the type of power source indicated on the  
marking label. If you are not sure of the type of power  
supply to your home, consult your product dealer or  
local power company. For products intended to operate  
from battery power, or other sources, refer to the  
operating instructions.  
21. Cleaning — Unplug this product from the wall outlet  
before cleaning. Do not use liquid cleaners or aerosol  
cleaners. Use a damp cloth for cleaning.  
22. Grounding or Polarization — This plug will fit into the  
power outlet only one way. This is a safety feature. If  
you are unable to insert the plug fully into the outlet, try  
reversing the plug. If the plug should still fail to fit,  
contact your electrician to replace your obsolete outlet.  
Do not defeat the safety purpose of the polarized plug.  
23. Outdoor Antenna Grounding If an outside antenna  
or cable system is connected to the product, be sure  
the antenna or cable system is grounded so as to  
provide some protection against voltage surges and  
built-up static charges. Article 810 of the National  
Electrical Code, ANSI/NFPA 70, provides information  
with regard to proper grounding of the mast and  
supporting structure, grounding of the lead-in wire to an  
antenna discharge unit, size of grounding conductors,  
location of antenna-discharge unit, connection to  
grounding electrodes, and requirements for the  
grounding electrode.  
('#674'5  
This unit is designed to play CD’s bearing the  
logo. If  
Sý  
CD’s do not conform to the CD standard, they may not play  
properly.  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
Your RadioShack CDG Karaoke System is one of the most  
versatile karaoke systems available. It lets you be the “star”  
as you sing along with your favorite recordings on a CD,  
CDG (a compact disc with a graphic track), or cassette tape,  
and hear your voice with the music through the powerful  
built-in speaker.  
The karaoke system’s CDG capability is the latest  
advancement in karaoke technology. Its built-in 7-inch  
monitor lets you read the lyrics.  
You can sing along without video graphics using special  
karaoke audio cassette tapes (not supplied) and the CD  
disks (such as the supplied CDG demo disk) that let you  
balance the volume of the original singer’s voice and the  
music tracks. Or, you can sing along with a regular pre-  
recorded cassette tape or CD (not supplied).  
You can also connect another audio source to the karaoke  
system, such as a stereo VCR, and play a karaoke video  
cassette (not supplied). ±  
±"016'"±"  
Additional karaoke CDs, audio  
cassettes, and video cassettes are  
available at your local RadioShack  
store or online at  
CDG/CD Player — play regular or karaoke CDs, or special  
CDGs, so you can experience digital images. Plus, the  
player’s 1-bit D/A converter and 8 times oversampling  
produce high quality sound.  
Plus, your karaoke system can be  
used as a PA system for speaking  
at parties or other small gatherings. 8-Watt Output Power — sing along and listen through one  
of the biggest amps offered in a karaoke system, including a  
5” full range speaker and a 2” tweeter.  
Cassette Deck — plays cassette tapes.  
Auto-Stop — automatically stops a tape when it finishes  
playing or recording to protect the tape and tape-handling  
parts.  
Automatic Search — quickly locate and play any track on  
the loaded CDG/CD.  
Audible Search — quickly locate a particular section of  
track while playing a CD.  
Supplied CDG Disc — lets you sing along with the music  
and adjust the volume of the pre-recorded voice and music.  
Recording — record your voice as you sing along with a  
CDG/CD or an external audio source connected to the  
system.  
Built-In Speaker — share the music with your family or  
friends.  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
#"37+%-".11-"#6";174"5;56'/  
Built-In Monitor — Displays the  
lyrics with the tempo of music  
when playing CDG discs.  
INTRO — Plays the first 10  
seconds of each track on a  
CDG/CD to help you locate  
a certain track.  
CDG/CD Controls —  
Use to play, pause, skip  
forward or backward, or  
stop CD and CDG  
playback.  
PROGRAM — Program  
up to 19 CD tracks in a  
selected order.  
REPEAT — Repeats a  
single track, all tracks,  
or a programmed  
MASTER VOLUME —  
Controls volume of  
CDG/CD and cassette  
being played.  
sequence of tracks.  
FUNCTION SELECT —  
Slide toCDG/CD, TAPE, or  
AUX, depending on  
YuorSystem  
t
ECHO — Adds an  
echo (concert hall  
effect) to your voice  
when using a  
oka  
whether you are playing a  
CDG, CD, tape, or another  
audio component.  
ikcL  
microphone.  
AQu  
BALANCE — Adjusts  
the balance between the  
prerecorded original  
singer’s voice and the  
music.  
MIC VOLUME —  
Controls the  
microphone’s  
volume.  
MIC 1 and MIC 2 — Use  
the supplied  
PITCH — Adjusts the  
tape speed to match  
your voice’s pitch.  
microphone and an  
optional microphone  
to sing duets or lead  
and background  
vocals.  
AUTOMATIC VOICE  
CONTROL— Lets you  
replace the pre-recorded  
original singer’s voice  
with your voice.  
Cassette Controls — Use to  
record, play, fast-forward,  
rewind, stop or pause  
playback of cassette tapes.  
Front View  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
BRIGHTAdjusts  
monitor picture  
brightness.  
CONTRAST — Adjust  
when the picture  
contrast is too weak or  
strong.  
VIDEOINConnects  
toanothervideoinput  
source.  
AUX IN L and R —  
Connects another  
audio input source,  
such as a stereo VCR  
or a radio tuner.  
V-HOLD — Adjusts  
monitor picture  
appearance to be  
steady (no rolling up or  
down).  
MONITOR ON/OFF —  
Turns the monitor on  
and off.  
AUX OUT L and R —  
Connects another  
audio component,  
such as an equalizer/  
amp or a PA system.  
RIGHT CHANNEL  
OUTPUT 815W —  
Connect to an  
external speaker.  
VIDEO OUT —  
Connects another  
video component,  
such as a TV or an  
external monitor.  
Microphone Holder  
Rear View  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
%100'%6+105  
"9#40+0)"  
"
R
R
To avoid electrical shock, do not  
connect the system to AC power  
until all other connections are  
complete.  
%100'%6+0)"/+%412*10'5  
The system has two microphone jacks, MIC 1 and MIC 2.  
Use the supplied microphone to sing along with your  
favorite recordings, and connect an optional microphone  
(not supplied) for duets or lead and background vocals. For  
the best performance, the additional microphone should be  
a unidirectional 600-ohm dynamic microphone with a  
1/4-inch (6.35-mm) plug and an ON/OFF switch. Your local  
RadioShack store has a wide selection of microphones.  
R
ý
1. Set MASTER VOLUME to MIN.  
2. If you are connecting only one microphone, plug it into  
MIC 1.  
If you are connecting a second microphone, plug it into  
MIC 2.  
3. To store the microphone, pull down the built-in  
microphone holder and place the microphone in the  
holder’s grip.  
When a microphone is plugged into MIC 1 or MIC 2, the  
system mixes the microphone output with recorded music  
from cassette tapes, CDs, or CDGs.  
%100'%6+0)"#0"126+10#."  
#7&+1"%1/210'06  
Cections  
To sing along with music from an optional component (such  
as a tuner, A/V receiver, or VCR), connect the component’s  
audio output jacks to the system’s AUX IN R and L jacks.  
To hear your voice and music from the system through an  
optional component (such as equalizer/booster or PA  
system), connect the component’s audio input jacks to the  
system’s AUX OUT R and L jacks.  
%100'%6+0)"#0"126+10#."  
8+&'1"%1/210'06  
To see images on the karaoke screen from an optional  
video component (such as a VCR or DVD player), plug one  
end of the supplied cable into VIDEO IN and the other end  
into the video component’s video output jack.  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
To see the words from a CDG on a TV or optional monitor,  
plug one end of the supplied yellow RCA cable into VIDEO  
OUT and the other end into your TV or monitor’s video input  
jack. You can only view video from the karaoke system on  
the connected TV; you cannot view video from another  
optional video component. ±  
±"016'"±"  
If your television or optional  
monitor does not have the  
required video input/output jack,  
you might need a radio  
frequency modulator (not  
supplied).  
%100'%6+0)"61"219'4  
When you have made all other connections, plug your  
system’s power cord into a standard AC outlet.  
You must change your TV or  
optional monitor’s source  
selection to AUX IN or VIDEO  
IN when connecting your  
karaoke system to an AUX IN or  
VIDEO IN. Refer to your TV or  
optional monitor’s instructions  
manual for details.  
%100'%6+0)"#0"':6'40#."52'#-'4  
If you want to connect an external speaker (not supplied),  
connect a speaker to the RIGHT CHANNEL OUTPUT 815W  
jack on the back of the system. The external speaker should  
have an impedance no less than 8 ohms and be able to  
handle 15 watts.  
%100'%6+0)"#"56'4'1"8%4  
Connect a stereo VCR’s left and right audio output (AUX  
OUT) to the system’s AUX IN L and R jacks.  
Connect a VCR’s video out to the Karaoke’s VIDEO IN jack.  
Con  
ecingtPow  
5+0)+0)"#.10)  
1. Press POWER to turn on the system. The POWER  
indicator lights.  
e
r
2. If you play a CDG or CD, slide FUNCTION SELECT to  
CDG/CD.  
If you play a cassette tape, slide FUNCTION SELECT to  
TAPE.  
If you connect an optional audio component, slide  
FUNCTION SELECT to AUX.  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
9+6*"#"%&)1%&"14"%#55'66'"6#2'  
1. Plug a microphone into MIC 1 or MIC 2.  
2. Press POWER to turn on the system. The POWER  
indicator lights.  
3. Load a CDG/CD in the CD compartment or a cassette  
tape in the cassette compartment. If you play a CDG,  
turn on the monitor by sliding MONITOR on the back of  
the system to ON. The monitor automatically displays  
words.  
4. Turn BRIGHT, CONTRAST, and V-HOLD on the back of  
the system to adjust the picture as necessary.  
5. Slide FUNCTION SELECT to CDG/CD or TAPE.  
6. Press PLAY/PAUSE  
or .PLAY.  
«
7. Adjust MASTER VOLUME to the desired level.  
8. Slide the microphone’s ON/OFF switch to ON and rotate  
MIC VOLUME to adjust its volume.  
9. Speak or sing into the microphone, while adjusting  
ECHO for the desired voice effects.  
10. Adjust TONE for the desired effects.  
11. If you are playing a tape, rotate PITCH so the pitch of  
music matches your voice.  
If you are using a karaoke cassette tape or CDG/CD,  
rotate AUTO VOICE CONTROL so that the prerecorded  
voice is replaced with your voice.  
Also rotate BALANCE to adjust the levels between the  
prerecorded singer’s voice and the music. Rotate  
BALANCE toward MUSIC to hear the music, or toward  
VOICE to hear the prerecorded singer’s voice. ±  
±"016'"±"  
AUTO VOICE CONTROL and  
BALANCE have no effect on a  
regular (non-karaoke) pre-recorded  
cassette tape.  
12. Press STOP to stop playing the CDG/CD. Then press  
*
ý
OPEN/CLOSE to open the compartment door and  
¬
remove the CDG/CD.  
Press  
STOP/EJ. to stop playing a tape. Press  
ªý  
ªý  
STOP/EJ. again to open the compartment door and  
remove the cassette tape.  
13. Slide the microphone’s ON/OFF switch to OFF, and slide  
MONITOR ON/OFF on the back of the system to OFF.  
14. Press POWER to turn off the system.  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
9+6*"#0"126+10#."#7&+1"  
%1/210'06  
1. If you are connecting only one microphone, plug it into  
MIC 1.  
If you are connecting a second microphone, plug it into  
MIC 2.  
2. Press POWER to turn on the system. The POWER  
indicator lights.  
3. Slide MONITOR ON/OFF on the back of the system to  
ON.  
4. Turn BRIGHT, CONTRAST, and V-HOLD on the back of  
the system to adjust the picture as necessary.  
5. Slide FUNCTION SELECT to AUX.  
6. Turn on the audio component. If you are using a VCR,  
load and play a video cassette.  
7. Rotate MASTER VOLUME to the desired level.  
8. To hear your voice with the music, slide the  
microphone’s ON/OFF to ON and rotate MIC VOLUME to  
adjust its volume.  
9. Speak or sing into the microphone. If needed, rotate  
ECHO to get desired voice effects.  
10. Rotate TONE to the desired setting.  
11. When you finish singing, slide ON/OFF on the  
microphone to OFF.  
12. Slide MONITOR ON/OFF on the back of the system to  
OFF.  
C
D
13. Press POWER to turn off the system, then turn off the  
Go  
audio component.  
r
CDOperatio  
%&)"14"%&"12'4#6+10  
2.#;+0)"#"%&)"14"%&"  
n
1. Press POWER to turn on the system. The power  
indicator lights.  
2. Slide FUNCTION SELECT to CDG/CD.  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3. If you are playing a CDG, slide MONITOR on the back of  
the system to ON.  
ý
4. Press OPEN/CLOSE to open the CDG/CD door.  
¬
5. Place a CDG/CD in the compartment tray over the  
center hub, label side up.  
ý
6. Press OPEN/CLOSE again to close the CDG/CD  
¬
compartment. &ý&ýthen the CDG/CD’s total number of  
tracks appear on the CDG/CD DISPLAY.  
7. Press PLAY/PAUSE  
. The PLAY/PAUSE indicator  
«
lights and the CDG/CD begins to play track 1. The CDG  
indicator lights when a CDG is playing, and the words  
to the song appear on the monitor.  
8. Adjust MASTER VOLUME and TONE to the desired level.  
9. To temporarily stop play, press PLAY/PAUSE  
. The  
ý
«
PLAY/PAUSE indicator flashes. To resume play, press  
PLAY/PAUSE  
again.  
«
±"016'"±"  
10. The system automatically stops play at the end of the  
Do not apply excessive force to the  
CDG/CD door, or press the door  
while a CDG/CD is playing.  
CDG/CD’s last track. To stop it sooner, press STOP. ±  
5MKRRKPI"6TCEMU  
You can skip up or down to the desired track by pressing  
SKIP  
or . To play the selected track, press PLAY/  
%
ý
&
PAUSE  
.
«
5GCTEJ"2NC["*(QT"%&"1PN[+  
Hold down SKIP  
or  
to search rapidly forward or  
%
&
backward during play. The CD plays rapidly and you hear  
the sound at a high speed.  
4GRGCV"2NC[  
To repeat the current track while a CD is playing, press  
REPEAT once, the REPEAT indicator flashes. To cancel  
repeat, press REPEAT twice. The REPEAT indicator turns  
off.  
To repeat all the tracks while a CD is playing, press REPEAT  
twice, the REPEAT indicator turns on.  
To cancel repeat, press REPEAT again, the REPEAT  
indicator turns off.  
+PVTQ"5ECP  
You can set the system to play the first 10 seconds of each  
track so you can quickly find the one you want.  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
To start intro scan from the first track, press PLAY/PAUSE  
. Then press INTRO when the disk is stopped.  
«
To start intro scan while a CD is playing, press INTRO during  
the first 10 seconds of play to start intro scan from the  
current track. Press INTRO after the first 10 seconds of play  
to start intro scan at the beginning of the next track.  
±"016'"±"  
Intro Scan  
The system stops after the last track is scanned. Press  
INTRO to exit intro scan. To stop scanning while a CD is  
playing, press INTRO and the system resumes normal play  
with the current track. ±  
To exit intro scan, you must  
press INTRO again, open the  
CD compartment, or turn off the  
karaoke system.  
You can use repeat play during  
intro scan.  
241)4#/"2.#;  
You can program the CDG/CD player to play up to 19 tracks  
in any order you choose. You can program the same track  
to play more than once.  
Program Play  
You can program up to 19  
tracks. When the 19th track is  
programmed, ¶ý¶ýflashes and  
you cannot program more  
tracks.  
1. Press STOP . The PLAY/PAUSE indicator turns off.  
*
2. Press PROGRAM. The PROGRAM indicator and &  
flash.  
You can use intro scan and  
repeat play during program  
play.  
3. Press SKIP  
or  
to select the desired track. The  
%
&
selected track number and the PROGRAM indicator  
flash.  
4. Press PROGRAM to store the selected track, the  
PROGRAM indicator and 0 continue flashing.  
5. Repeat Steps 3 and 4 to program up to 19 tracks. ±  
6. Press PLAY/PAUSE «ýto play the programmed tracks.  
The first track number you selected appears on the  
display and the PROGRAM indicator continues to flash.  
7. Program play automatically stops at the end of the last  
programmed track. To stop program play sooner, press  
STOP . If you press STOP during programming, you  
*
*
exit the programming mode, and all programmed tracks  
are lost.  
4GXKGYKPI14GRNCEKPI"C"  
2TQITCOOGF"5GSWGPEG  
1. While play is stopped, repeatedly press PROGRAM to  
review the programmed track numbers.  
2. To replace a programmed track, repeatedly press  
PROGRAM until the desired programmed track number  
flashes. The PROGRAM indicator continues to flash.  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3. Repeatedly press SKIP  
or  
to select the desired  
%
&
track, then press PROGRAM to store the track. The next  
programmed track number automatically appears and  
flashes. °  
°"*+06"°"  
%&)1%&"%CTG"6KRU  
Even though a compact disc is  
durable, treat the CD surface with  
care.  
'TCUKPI"C"2TQITCOOGF"5GSWGPEG  
To erase a programmed sequence, press OPEN/CLOSE or  
STOP before or after programmed play, press POWER, or  
change the selected function.  
Do not write on either side of the  
CD, particularly the non-label  
side (signals are read from the  
non-label side).  
Do not store CDs in high  
temperature or high humidity  
areas. They might warp.  
%#55'66'"&'%-"12'4#6+10  
1. Press  
door.  
STOP/EJ. to open the cassette compartment  
ªý  
Keep CDs dry. A water drop can  
act as a lens and affect the laser  
beam's focus.  
2. Insert a cassette with the exposed tape down and the  
desired side facing you. Avoid touching the tape.  
Always handle a CD by the  
edges to avoid fingerprints and  
always keep it in its protective  
case or sleeve when it is not in  
use. Fingerprints and scratches  
on the CD's surface can prevent  
the laser beam from correctly  
reading the digital information. If  
the CD gets scratched, use  
RadioShack Scratch 'n Fix to  
repair the disc.  
3. Push the cassette compartment door closed until it  
clicks shut.  
4. Press POWER to turn on the system. The POWER  
indicator lights.  
5. Slide FUNCTION SELECT to TAPE.  
6. Press PLAY  
.
.
7. Rotate MASTER VOLUME and TONE to suit your  
listening preferences.  
8. When the tape reaches its end, the cassette deck  
±"016'"±"  
automatically stops and PLAY releases. Press  
STOP/EJ. to stop play sooner.  
ªý  
Use only normal bias tapes in  
the cassette deck. Metal or  
high-bias type tapes are not  
recommended.  
9. Press  
STOP/EJ. again to open the cassette  
ªý  
compartment, then remove the cassette tape. ±  
To temporarily stop play, press  
f
fý  
PAUSE . Press PAUSE  
ion  
4'%14&+0)";174"81+%'"9+6*"/75+%  
again to resume play.  
t
To rapidly wind the tape forward  
1. Connect a microphone. See “Connecting Microphones”  
on Page 9.  
or backward, press  
FFWD  
STOP/  
+
or  
REW. Press  
ªý  
"ý  
2. Load a blank audio cassette in the cassette deck.  
EJ. when you reach the desired  
DckOpera  
section.  
3. Slide FUNCTION SELECT to CDG/CD for a CDG/CD or  
To record, press REC. When  
ç
AUX for an optional audio component.  
REC is pressed, .PLAY  
ç
Caste  
automatically is pressed. Press  
4. If you are recording with a CDG or CD, follow the steps  
in “Playing a CDG or CD” on Page 12 . See “With an  
Optional Audio Component” on Page 12 if you are  
recording from another audio component.  
STOP/EJ. to stop  
recording.  
ªý  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5. To record your voice with a CDG/CD, repeatedly press  
ýor  
until the desired track number appears.  
SKIP  
%
&
°"*+06"°"  
4GUVQTKPI"6CRG"6GPUKQP"CPF"  
5QWPF"3WCNKV[  
To record your voice with music from an optional audio  
component, turn on the optional component.  
After you play a cassette tape  
several times, the tape might  
become tightly wound on the reels.  
This can cause playback sound  
quality to deteriorate.  
6. Press PLAY/PAUSE  
, then press REC. The tape  
ç
«
deck records your voice along with the sound from the  
CDG/CD or the optional audio component. °  
To restore the sound quality, fast-  
forward the tape from the beginning  
to the end of one side, then  
completely rewind it. Then loosen  
the tape reels by gently tapping  
each edge of the cassette on a flat  
surface. .  
6417$.'5*116+0)  
2TQDNGO  
2QUUKDNG"%CWUG  
5QNWVKQP  
The karaoke  
system does not  
work.  
Make sure the power  
plug is inserted into  
the AC outlet.  
No power.  
'TCUKPI"6CRGU  
To record over a cassette tape,  
simply record as usual. The  
cassette deck records over the  
previous recording.  
Disc is not inserted  
correctly.  
Make sure disc is  
inserted correctly.  
CD PLAYER does  
not work.  
Slide FUNCTION  
SELECT to the  
correct setting.  
Incorrect function is  
selected (CDG/CD).  
You can quickly erase both sides of  
a cassette tape using a  
RadioShack bulk tape eraser. ±  
Moisture has  
Wait about 20 to 30  
minutes to let it dry.  
formed inside the Humidity is high.  
CD deck.  
2TGXGPVKPI"#EEKFGPVCN"'TCUWTG  
Cassette tapes have two erase-  
protection tabs — one for each  
side. When a tab is in place, you  
can record on that side.  
Incorrect function is  
selected (CDG/CD).  
No song lyrics  
appear on screen.  
Slide FUNCTION  
SELECT to CDG/CD.  
Slide MONITOR ON/  
OFF to ON.  
Monitor is off.  
To prevent accidental erasure of a  
tape recording, use a screwdriver  
to remove one or both of the  
Picture is jumping  
V. hold not tuned.  
up.  
Adjust the V. hold  
knob.  
cassette tape’s erase-protection  
tabs. This prevents REC from  
ç
CD only plays first  
10 seconds of  
track.  
being pressed.  
Intro scan function is Press INTRO to turn  
turned on. off intro scan.  
If you later decide to record on a  
tape side after you have removed  
the erase-protection tab, place a  
piece of strong plastic tape over  
that side’s erase-protection hole.  
Be sure you cover only the hole  
originally covered by the erase-  
protection tab  
T
r
ubleshoting  
."%#76+10".  
Be careful not to damage the  
cassette when tapping it. Do not  
touch the exposed tape or allow  
any sharp objects near the  
cassette.  
(Continued)  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
%#4'  
."%#76+10".  
Keep the system dry; if it gets wet, wipe it dry immediately.  
Use and store the system only in normal temperature  
environments. Handle the system carefully; do not drop it.  
Keep the system away from dust and dirt, and wipe it with a  
damp cloth occasionally to keep it looking new.  
(Continued)  
Removing the erase-protection  
tabs does not prevent a bulk eraser  
from erasing a cassette tape.  
Care  
Modifying or tampering with the system’s internal  
components can cause a malfunction and might invalidate  
its warranty and void your FCC authorization to operate it. If  
your system is not performing as it should, take it to your  
local RadioShack store for assistance.  
%.'#0+0)"6*'"  
6#2'/*#0&.+0)"2#465  
Dirt, dust or particles of the tape's coating can accumulate  
on the tape heads and other parts that the tape touches.  
This can greatly reduce the performance of the cassette  
player. After every 20 hours of tape player operation, follow  
these steps to clean the tape-handling parts or use a  
RadioShack cassette deck cleaning kit.  
1. Disconnect AC power.  
2. Open the cassette compartment door and press PLAY  
to expose the tape-handling parts.  
3. Use a cotton swab dipped in denatured alcohol or tape  
head cleaning solution to clean the tape guides, record/  
play head, erase head, pinch roller, and capstan.  
Tape Guides  
Capstan  
Pinch Roller  
Record/Play Head  
Erase Head  
4. When you finish cleaning, press  
STOP/EJ. and  
ª
close the cassette compartment door. Then reconnect  
power.  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
52'%+(+%#6+105  
Audio Section:  
Output Power (Maximum) ................................................... 8 Watts  
Output Impedance ..................................................................... 8  
CD Player Section:  
Frequency Response .............................. 20 Hz to 20 KHz (± 3 dB)  
Signal–to–Noise Ratio ........................................................... 65 dB  
Wow and Flutter ....................................................... Immeasurable  
D-A Conversion ............................................................... 1-Bit DAC  
Number of Programs ....... 20 Steps Random Access programming  
Sampling System ........................................ 8 Times Oversampling  
Cassette Deck Section:  
Wow and Flutter ..................................................... 0.35% (WRMS)  
Frequency Response ........................... 125 Hz to 6.3 KHz (± 5 dB)  
Tape Speed ................................................................ 4.75 cm/sec.  
AC Input Power ...................................................... AC 120V/60 Hz  
Dimensions (H×W×D) ............................. 22.5 × 11.8 × 10.5 Inches  
(571.5 × 299.7 × 266.7 mm)  
Weight ................................................................................ 24.8 lbs  
(11.3 kg)  
Accessories: Pre-recorded Karaoke CD+G disc, AV Cable,  
Dynamic Microphone  
Specifications are typical; individual units might vary. Specifications  
are subject to change and improvement without notice.  
126+10#."#%%'5514+'5  
Optional accessories, available at your local RadioShack  
CD&G sets of musical hits, Karaoke cassettes, and extra  
speakers.  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
016'5  
s
Note  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Limited Ninety-Day Warranty  
This product is warranted by RadioShack against manufacturing defects in material and workman-  
ship under normal use for ninety (90) days from the date of purchase from RadioShack company-  
owned stores and authorized RadioShack franchisees and dealers. EXCEPT AS PROVIDED  
HEREIN, RadioShack MAKES NO EXPRESS WARRANTIES AND ANY IMPLIED WARRANTIES,  
INCLUDING THOSE OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE,  
ARE LIMITED IN DURATION TO THE DURATION OF THE WRITTEN LIMITED WARRANTIES  
CONTAINED HEREIN. EXCEPT AS PROVIDED HEREIN, RadioShack SHALL HAVE NO LIABIL-  
ITY OR RESPONSIBILITY TO CUSTOMER OR ANY OTHER PERSON OR ENTITY WITH RE-  
SPECT TO ANY LIABILITY, LOSS OR DAMAGE CAUSED DIRECTLY OR INDIRECTLY BY USE  
OR PERFORMANCE OF THE PRODUCT OR ARISING OUT OF ANY BREACH OF THIS WAR-  
RANTY, INCLUDING, BUT NOT LIMITED TO, ANY DAMAGES RESULTING FROM INCONVE-  
NIENCE, LOSS OF TIME, DATA, PROPERTY, REVENUE, OR PROFIT OR ANY INDIRECT,  
SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, EVEN IF RadioShack HAS BEEN AD-  
VISED OF THE POSSIBILITY OF SUCH DAMAGES.  
Some states do not allow limitations on how long an implied warranty lasts or the exclusion or limita-  
tion of incidental or consequential damages, so the above limitations or exclusions may not apply to  
you.  
In the event of a product defect during the warranty period, take the product and the RadioShack  
sales receipt as proof of purchase date to any RadioShack store. RadioShack will, at its option, un-  
less otherwise provided by law: (a) correct the defect by product repair without charge for parts and  
labor; (b) replace the product with one of the same or similar design; or (c) refund the purchase  
price. All replaced parts and products, and products on which a refund is made, become the prop-  
erty of RadioShack. New or reconditioned parts and products may be used in the performance of  
warranty service. Repaired or replaced parts and products are warranted for the remainder of the  
original warranty period. You will be charged for repair or replacement of the product made after the  
expiration of the warranty period.  
This warranty does not cover: (a) damage or failure caused by or attributable to acts of God, abuse,  
accident, misuse, improper or abnormal usage, failure to follow instructions, improper installation or  
maintenance, alteration, lightning or other incidence of excess voltage or current; (b) any repairs  
other than those provided by a RadioShack Authorized Service Facility; (c) consumables such as  
fuses or batteries; (d) cosmetic damage; (e) transportation, shipping or insurance costs; or (f) costs  
of product removal, installation, set-up service adjustment or reinstallation.  
This warranty gives you specific legal rights, and you may also have other rights which vary from  
state to state.  
RadioShack Customer Relations, 200 Taylor Street, 6th Floor, Fort Worth, TX 76102  
12/99  
A
Cat. No. 32-1174  
08A02  
Printed in China  
RadioShack Corporation  
Fort Worth, Texas 76102  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Radio Shack Scanner 20 423 User Guide
RCA Flat Panel Television RLEDV2490A User Guide
RCA Home Theater System RTS202 User Guide
Remington Electric Shaver BHT 600 User Guide
Rotel Speaker System RMZ 955 User Guide
Rotel Stereo Receiver RX 940AX User Guide
Ryobi Pole Saw P560 User Guide
Saleen Automobile Accessories 10 8002 C11670C User Guide
Sanyo Automobile Accessories ATK RZP56BGWB User Guide
Sears Drill 11321371 User Guide