43-324
User’s Guide
5.8 GHz • Caller ID Cordless Phone
Thank you for purchasing your 5.8 GHz Caller ID Cordless Phone from
RadioShack. Please read this user’s guide before installing, setting up, and
using your new phone.
Download from Www.Somanuals.com. All Manuals Search And Download.
Delete a Directory Entry........................................................................ 18
Copy a Directory Entry into Speed Dial................................................ 19
Dial a Number from the Directory......................................................... 19
Speed Dial.....................................................................................20
Store a Speed Dial Entry....................................................................... 20
Edit a Speed Dial Entry ......................................................................... 21
Delete a Speed Dial Entry..................................................................... 21
Dial a Speed Dial Number..................................................................... 22
Reassign Speed Dial Locations ............................................................. 22
Call log ..........................................................................................23
About Caller ID...................................................................................... 23
About the Call Log................................................................................ 23
Review the Call Log............................................................................... 24
Make Call Log Entries Ready to Dial..................................................... 24
Dial a Call Log Number......................................................................... 25
Save a Call Log Entry to the Directory.................................................. 25
Delete from the Call Log....................................................................... 26
Call Log Display Screen Messages........................................................ 26
Additional Information..................................................................27
Handset Display Screen Messages........................................................ 27
Battery................................................................................................... 27
Important Safety Instructions................................................................ 28
Troubleshooting .................................................................................... 30
Operating Range................................................................................... 36
Maintenance.......................................................................................... 36
About Cordless Telephones.................................................................. 37
Specifications......................................................................................... 38
FCC Information.................................................................................... 38
Limited Warranty................................................................................... 40
Download from Www.Somanuals.com. All Manuals Search And Download.
3
Package Contents
AC adapter
Telephone base
and handset
Handset battery
Telephone
line cord
Base holder
Features
• Caller ID Display
• Voicemail Indicator
• 9-number speed-dial
Download from Www.Somanuals.com. All Manuals Search And Download.
4
Setup
Telephone Base Installation
Install the telephone base as shown below. Make sure that the electrical
outlet is not controlled by a wall switch.
If you subscribe to Digital Subscriber Line (DSL) high-speed Internet service
through your telephone lines, you must install a DSL filter between the
telephone base and the telephone wall jack to prevent noise and caller
ID problems caused by DSL interference. Please contact your DSL service
provider for more information about DSL filters.
n
Note: Use only the power adapter supplied with this product. To
purchase a replacement, visit your local RadioShack store or go to
Telephone
wall jack
Telephone
base
adapter
DSL filter
(optional, not
included)
Telephone
line cord
Telephone
base
Download from Www.Somanuals.com. All Manuals Search And Download.
5
Battery Installation and Charging
Install the battery as shown below. The battery may have enough charge for
short calls. For best performance, charge the battery for at least 16 hours
before first use. Completely charge and drain the battery two or three
times every three months afterwards. When the battery power is low, LOW
BATTERY is displayed and flashes on the handset screen.
1. Insert the plug of the battery as indicated. Make sure it is plugged
securely and matches the color-coded label inside the battery
compartment.
2. Place the battery with the label THIS SIDE UP facing up, and the wires
inside the battery compartment.
3. Align the battery compartment cover flat against the battery
compartment, then slide it upwards until it clicks into place.
4. Charge the handset by placing it in the telephone base. The handset
charge light is on when charging.
n
Note: If the handset will not be used for a long period of time, remove
the battery to prevent possible leakage.
Match color
code label
Black wire
Red wire
Download from Www.Somanuals.com. All Manuals Search And Download.
ꢀ
Wall Bracket Installation
Your telephone base comes with the wall bracket installed, ready for
desktop use. You may also mount your telephone onto a standard
telephone wall plate.
Wall bracket installation:
To prepare the telephone base for wall mounting, you need to remove the
bracket if it is currently attached for desktop use. Press the tabs located on
the legs of the bracket to loosen, then lift the bracket up and away from the
telephone base.
1. Insert the lower tabs of the wall bracket into the lower grooves in the
telephone base, then snap the upper tabs of the wall bracket into
place.
2. Mount the telephone base on the wall by positioning it so the
mounting studs fit into the holes on the telephone base and wall
bracket. Slide the telephone base down on the mounting studs until it
locks into place.
3. To remove the bracket, press both upper portion tabs firmly and pull
the bracket downward until it releases from the grooves.
Wall bracket
Wall bracket in
correct mounting
position
2
1
Download from Www.Somanuals.com. All Manuals Search And Download.
ꢀ
Telephone Features
Charge Light
Indicates the handset is
charging.
/ VOL- / CID
• Lower the listening volume (during a call).
• Review the call log (when phone is not in use).
• Hold to adjust ringer volume (when phone is
not in use).
• Scroll down (while programming or reviewing
the redial list).
/ Flash
• Make or answer a call.
• Receive an incoming call when you
receive a call waiting alert.
TONE
• Switch to tone dialing temporarily when
using the pulse service (see page 15).
CHAN / REMOVE
• Switch to a clearer channel (during a call).
• Hold to delete all records in the call log
(when phone is not in use).
• Delete the desired record (when reviewing
the call log or redial list).
PROG
Enter programming mode
(while phone is not in use).
REDIAL/PAUSE
• Review the redial list.
• Insert a dialing pause while dialing or
entering numbers into the directory.
Download from Www.Somanuals.com. All Manuals Search And Download.
8
SELECT
Store a programming option or a
directory entry.
/ VOL+ /
• Display the directory (when phone is not in use).
• Hold to adjust the ringer volume (when phone is not in use).
• Increase the listening volume (during a call).
• Scroll up (while programming or reviewing the redial list).
OFF
• Hang up.
• Silence the ringer while the handset is ringing.
• Hold for two seconds to erase the MISSED CALLS
display (while phone is not in use).
• Exit without making changes (during programming).
IN USE
• Flashes when there is an incoming call.
• On when the handset is in use.
VOICEMAIL
Flashes when you have new voicemail from
your telephone company.
FIND HANDSET
Press to page the handset.
• Display other dialing options when reviewing the call log.
• Use the CLR VOICEMAIL feature from the main menu.
Download from Www.Somanuals.com. All Manuals Search And Download.
ꢁ
Date and Time
If you subscribe to caller ID service, the date and time is set automatically
with the next incoming call. If you do not have caller ID service, you can set
the date and time manually.
1. Press PROG.
2. Press or until DATE/TIME is displayed. Press SELECT.
3. When the month is flashing, press or until the screen displays the
correct month and then press SELECT or PROG.
4. When the date is flashing, press or until the screen displays the
correct date and then press SELECT or PROG.
5. When the hour is flashing, press or until the screen displays the
correct hour and then press SELECT or PROG.
ꢂ. When the minute is flashing, press or until the screen displays the
correct minute and then press SELECT or PROG.
ꢀ. When AM or PM is flashing, press or to choose between AM or
PM and then press SELECT or PROG. You will hear a confirmation tone.
n
Note: When there is a power failure, the time may need to be reset.
Ringer
You can select from different ringers.
1. Press PROG.
2. Press or until the screen displays RINGER: and the current setting.
3. Press SELECT. The current setting flashes, and you will hear a sample of
the ringer.
4. Press or to select RINGER: 1, 2, 3, or 4. You will hear a sample of
each ring tone.
5. Press SELECT or PROG to confirm. You will hear a confirmation tone.
Download from Www.Somanuals.co1m0. All Manuals Search And Download.
Ringer Volume
You can change the ringer volume to a comfortable level or turn the ringer
off.
1. Press PROG. Press or until the screen displays RINGER VOL: and
the current setting.
2. Press SELECT. The current setting flashes, and you will hear a sample of
the ringer volume.
3. Press or to select ringer volume from OFF, LOW or HI. You will
hear a sample of the selected volume level.
4. Press SELECT or PROG to confirm. You will hear a confirmation tone.
-OR-
1. Press and hold or until the screen displays RINGER VOL: and the
current setting. The current setting flashes and you will hear a sample of
the ringer volume.
2. Press or to select ringer volume from OFF, LOW or HI. You will hear
a sample of the selected volume level.
3. Press SELECT or PROG to confirm. You will hear a confirmation tone.
n
Notes:
•
•
If the ringer volume is set to OFF, RINGER OFF and
are displayed.
Even if the ringer volume is set to OFF, the handset still rings when you
press FIND HANDSET.
Dial Mode
If you have touch tone service, the telephone is ready for use as soon as the
battery is charged. If you have pulse (rotary) service, you need to change the
dial mode.
1. Press PROG.
2. Press or until the screen displays DIAL MODE: and the current
setting.
3. Press SELECT. The current setting flashes.
4. Press or to select TONE or PULSE.
5. Press SELECT or PROG to confirm your selection and there is a
confirmation tone.
Download from Www.Somanuals.co1m1. All Manuals Search And Download.
Home Area Code
If you dial your local calls using only seven digits (area code not required),
you can program your home area code, following the steps below. By
programming your home area code, when you receive a call within your
local area, the telephone number is automatically stored without the area
code in the call log.
1. Press PROG.
2. Press or until the screen displays HOME AREA CODE.
3. Press SELECT. The stored area code is displayed with the first digit
flashing.
4. Use the dial key pad to enter the desired home area code.
5. Press SELECT or PROG to confirm. You will hear a confirmation tone.
n
Notes:
•
If your phone service provider requires you to dial the area code when
making a local call, or you want to cancel the home area code you have
already programmed, reprogram your home area code to 000.
•
Press CHAN/REMOVE when in the home area code menu to delete
the stored home area code. ___ is then displayed.
Language
1. Press PROG.
2. Press or until LANGUAGE is displayed.
3. Press SELECT. The current setting flashes.
4. Press or until the screen displays the desired language (ENGLISH,
ESPANOL or FRANCAIS).
5. Press SELECT or PROG to confirm. You will hear a confirmation tone.
Clear Voicemail
If you subscribe to voicemail services provided by your telephone
company, NEW VOICEMAIL and
are displayed on the handset and
the VOICEMAIL light on the telephone base flashes when you have a new
voicemail message.
Download from Www.Somanuals.co1m2. All Manuals Search And Download.
To turn this indicator off:
1. Press PROG.
2. Press or until the screen displays CLR VOICEMAIL.
3. Press SELECT. The screen displays CLEAR? and YES flashes.
4. Press SELECT or PROG to confirm. You will hear a confirmation tone.
n
Note: The clear voicemail feature only turns off the displays NEW
VOICEMAIL and on the handset, and the VOICEMAIL light on the
telephone base. It does not delete your voicemail messages.
Download from Www.Somanuals.co1m3. All Manuals Search And Download.
Telephone Operation
Make Calls
Press
/FLASH and then use the dial pad keys to dial a number.
-OR-
1. Enter the phone number first. You can press to backspace and press
CHAN/REMOVE to erase digits.
2. Press
/FLASH to dial.
Answer Calls
Press any dial pad keys (except /VOL-/CID, /VOL+/ and OFF) to
answer an incoming call.
End Calls
Press OFF or put the handset back on the telephone base to end a call.
n
Notes:
•
•
The call timer is activated during a call to show call duration.
The handset beeps if it is moved out of range while on a call.
Volume
Press /VOL-/CID or /VOL+/ to adjust the listening volume during a
conversation.
Channel
Press CHAN/REMOVE to switch to a clearer channel while on a call.
Call Waiting
If you subscribe to call waiting service and you are on a call when a new call
comes in, you will hear a beep. The caller ID information is displayed if you
subscribe to combined caller ID with call waiting service from your local
telephone company.
• Press
/FLASH on the handset to put the current call on hold and
answer the incoming call.
• Press
/FLASH at anytime to alternate between calls.
Download from Www.Somanuals.co1m4. All Manuals Search And Download.
Temporary Tone Dialing
If you have pulse (rotary) service, you can change from pulse to touch tone
dialing during a call by pressing TONE*. This is useful if you need to send
touch tone signals to access telephone banking or long distance services.
Once you have initiated your call by dialing the phone number in pulse
(rotary), press TONE*. Now, all subsequent key presses are sent as touch
tone signals.
After you hang up, the phone returns to pulse (rotary) dialing for the next call.
Redial
The telephone stores the five most recently dialed telephone numbers in
the redial list. When the list is full, the oldest entry is deleted to make room
for the new entry.
1. Press REDIAL/PAUSE, then press
,
, or REDIAL/PAUSE repeatedly
to review the redial list. Press CHAN/REMOVE to delete the displayed
number.
2. Press
/FLASH, then press REDIAL/PAUSE to dial the last telephone
number dialed.
-OR-
• Press REDIAL/PAUSE, then press
,
, or REDIAL/PAUSE repeatedly
/FLASH to dial the
until the desired entry displays, then press
number.
Find Handset
Press FIND HANDSET on the telephone base to locate the handset and
the handset is not placed in the telephone base. The handset rings and
**PAGING** will be displayed on its screen.
• Press FIND HANDSET again or put the handset back on the telephone
base to stop the paging tone.
-OR-
• Press OFF on the handset to stop the paging tone on the selected
handset.
Download from Www.Somanuals.co1m5. All Manuals Search And Download.
Directory
The directory can store up to 20 entries (including nine speed dial entries).
Each entry may consist of a number up to 24 digits and a name up to 14
characters.
Store a Directory Entry
1. Press PROG. The screen displays DIRECTORY.
2. Press SELECT. The screen displays ENTER NAME.
3. Use the dial pad keys to enter the name. See “Character Chart” on page 17.
• Press to move the cursor to the left or to the right.
• Press CHAN/REMOVE to erase a character.
4. When finished, press SELECT or PROG. The screen displays ENTER
NUMBER.
5. Use the dial pad keys to enter the telephone number.
• Press to move the cursor to the left or to the right.
• Press CHAN/REMOVE to erase a digit.
• Press REDIAL/PAUSE to insert a dialing pause (P is displayed).
ꢂ. Press SELECT or PROG. The screen displays DISTINCT RING? and the
current setting.
ꢀ. Press or to choose Y (yes) if you wish to customize this entry or
choose N (no) for a normal ringer. If you choose Y, is displayed with
the directory entry.
8. Press SELECT or PROG to confirm. You will hear a confirmation tone.
Download from Www.Somanuals.co1mꢂ. All Manuals Search And Download.
Character Chart
Use the dial pad keys and the chart below to enter a name (up to 14
characters). An error tone sounds if you try to enter more than 14 characters.
Each press of a particular key causes the characters to be displayed in the
following order:
Characters by number of key presses
Dial key
1
1
2
3
4
5
6
1
2
3
4
5
6
7
8
9
0
*
A
D
G
J
B
E
C
F
I
2
3
4
5
6
S
8
Z
H
K
L
M
P
N
Q
U
X
O
R
V
Y
7
9
T
W
0
*
#
&
‘
,
-
.
#
Review the Directory
1. Press /VOL+/ . The screen displays DIRECTORY.
2. Press or to scroll through the entries stored in the directory
alphabetically.
-OR-
Press the dial pad key for the first letter of the name you want to search.
If necessary, scroll or to find the desired entry.
n
Notes:
•
When you reach the end of the list in the directory, END OF LIST is
shown on the screen and there is an error tone.
•
If you press a dial pad key for alphabetical search while in the directory
and there are no entries starting with the letters of that key, NO DATA is
displayed on the screen.
Download from Www.Somanuals.co1mꢀ. All Manuals Search And Download.
Edit a Directory Entry
1. Press /VOL+/ . The screen displays DIRECTORY.
2. Press or to scroll through the entries stored in the directory
alphabetically.
-OR-
Press the dial pad key for the first letter of the entry you want to edit. If
necessary, scroll or to find the desired entry.
3. When the screen displays the desired entry,
SPEED EDIT DEL
8008437422
press SELECT. EDIT flashes.
4. Press SELECT. The screen displays the name and
number. The cursor appears at the beginning of
the name.
• Use the dial pad keys to edit the name.
• Press to move the cursor to the left or to the right.
• Press CHAN/REMOVE to erase a character.
5. Press SELECT to move on to the phone number.
• Use the dial pad keys to edit the number.
• Press to move the cursor to the left or to the right.
• Press CHAN/REMOVE to erase a digit.
• Press REDIAL/PAUSE to insert a dialing pause (P will be displayed).
ꢂ. Press SELECT. The screen displays DISTINCT RING? and the current
setting.
ꢀ. Press or to choose Y (yes) to customize this entry, or choose N
(no) for a normal ringer. If you choose Y, will be displayed with the
directory entry.
8. Press SELECT to confirm. You will hear a confirmation tone.
Delete a Directory Entry
1. Press /VOL+/ . The screen displays DIRECTORY.
2. Press or to scroll through the entries stored in the directory
alphabetically.
-OR-
Download from Www.Somanuals.co1m8. All Manuals Search And Download.
Press the dial pad key for the first letter of the entry to delete. If
necessary, scroll or to find the desired entry.
SPEED EDIT DEL
8008437422
3. When the screen displays the desired entry,
press SELECT. Then press or until DEL
(delete) flashes.
4. Press SELECT. The screen displays ERASE NO YES and the number. The
current choice flashes.
5. Press until YES flashes.
ꢂ. Press SELECT. You will hear a confirmation beep.
Copy a Directory Entry into Speed Dial
1. Press /VOL+/ . The screen displays DIRECTORY.
2. Press or to scroll through the entries stored in the directory
alphabetically.
-OR-
Press the dial pad key for the first letter of the entry to copy. If
necessary, scroll or to find the desired entry.
3. When the screen displays the desired entry,
SPEED EDIT DEL
8008437422
press SELECT. Then press or until SPEED
flashes.
4. Press SELECT. The screen displays ENTER 1-9.
5. Press a key (1-9) to copy this entry from the directory to the speed dial
memory and assign the memory location. You will hear a confirmation
beep. A memory location number (01 through 09) will be displayed
with this entry.
Dial a Number from the Directory
1. Press /VOL+/ . The screen displays DIRECTORY.
2. Press or to scroll through the entries stored in the directory
alphabetically.
-OR-
Press the dial pad key for the first letter of the desired entry. If
necessary, scroll or to find the desired entry.
3. When the screen displays the desired entry, press
/FLASH.
Download from Www.Somanuals.co1mꢁ. All Manuals Search And Download.
Speed Dial
Your telephone can store up to nine telephone numbers with names (up
to 14 characters and 24 digits in each location) in the speed dial memory
locations you assign in the handset.
Store a Speed Dial Entry
1. Press PROG and then press or
until the screen displays SPEED
DIAL.
2. Press SELECT. The screen displays ENTER 1-9.
3. Press a key (1 through 9) to assign the speed dial location to store this
number. The screen displays ENTER NAME.
4. Use the dial pad keys to enter the name (see “Character Chart” on page
17) and then press SELECT or PROG.
• Press to move the cursor to the left or to the right.
• Press CHAN/REMOVE to erase a character.
5. The screen displays ENTER NUMBER.
ꢂ. Use the dial pad keys to enter the telephone number, and then press
SELECT or PROG.
• Press to move the cursor to the left or to the right.
• Press CHAN/REMOVE to erase a digit.
ꢀ. Press REDIAL/PAUSE to insert a dialing pause (P will be displayed).
8. The screen displays DISTINCT RING? and the current setting.
8. Press or
to choose Y (yes) to customize this entry, or choose N (no)
for a normal ringer. If you choose Y, will be displayed with the entry.
ꢁ. Press SELECT or PROG to confirm. You will hear a confirmation tone.
n
Notes:
•
The entries stored in the speed dial memory will be numbered 01
through 09 and share the memory in the directory.
•
•
Press OFF at any time to exit speed dial mode.
If the location is not empty, the new entry will replace the old entry and
the old entry will be moved to a directory location.
Download from Www.Somanuals.co2m0. All Manuals Search And Download.
Edit a Speed Dial Entry
1. Press and hold the speed dial location key (1-9) of the desired entry.
2. When the screen displays the entry to edit,
SPEED EDIT DEL
8008437422
press SELECT and EDIT flashes.
3. Press SELECT. The screen displays the name and
01
number. The cursor appears at the beginning of
the name. Use the dial pad keys to edit the name.
• Press to move the cursor to the left or to the right.
• Press CHAN/REMOVE to erase a character.
4. Press SELECT to move on to the phone number. Use the dial pad keys
to edit the number.
• Press to move the cursor to the left or to the right.
• Press CHAN/REMOVE to erase a digit.
• Press REDIAL/PAUSE to insert a dialing pause (P will be displayed).
5. Press SELECT. The screen displays DISTINCT RING? and the current
setting.
ꢂ. Press or to choose Y (yes) to customize this entry, or choose N
(no) for a normal ringer. If you choose Y, will be displayed with the
directory entry.
ꢀ. Press SELECT to confirm. You will hear a confirmation tone.
Delete a Speed Dial Entry
1. Press and hold the speed dial location key (1-9) of the desired entry.
2. When the screen displays the desired entry,
SPEED EDIT DEL
press SELECT. Then press or until DEL
(delete) flashes.
8008437422
01
3. Press SELECT. The screen displays ERASE NO
YES and the number. The current choice flashes.
4. Press until YES flashes.
5. Press SELECT. You will hear a confirmation beep.
Download from Www.Somanuals.co2m1. All Manuals Search And Download.
Dial a Speed Dial Number
1. Press and hold a speed dial location key (1-9) of the desired entry.
2. Press
to dial the displayed number.
Reassign Speed Dial Locations
1. Press and hold the speed dial location key (1-9) of the desired entry.
2. When the screen displays the desired entry,
SPEED EDIT DEL
8008437422
press SELECT. Press or until SPEED flashes.
3. Press SELECT. The screen displays ENTER 1-9.
01
4. Press a key (1-9) to reassign this entry into
another memory location. You will hear a confirmation beep.
Download from Www.Somanuals.co2m2. All Manuals Search And Download.
Call log
About Caller ID
The caller ID with call waiting feature in this telephone lets you see the
name and telephone number of the caller before answering the call, even
when already on a call. These features require services provided by your
local telephone company.
Contact your telephone company if:
• you have both caller ID and call waiting, but as separate services (you
may need combined service),
• you have only caller ID service, or only call waiting service, or
• you do not subscribe to any caller ID or call waiting services but wish to
try these services.
You can use this telephone with regular caller ID service, and you can use
its other features without subscribing to either caller ID or combined caller
ID with call waiting service. There may be fees for these services, and these
services may not be available in all areas.
About the Call Log
The caller ID features will work only if both you and the caller are in areas
offering caller ID service, and if both telephone companies use compatible
equipment.
Caller’s name
RADIOSHACK
Caller’s telephone
number
800-843-7422
New call log indicator
and call log location
NEW05
6:10AM
08/17
Time of call
Date of call
If you subscribe to caller ID service, information about each caller will be
displayed after the first or second ring.
• The call log can store up to 45 entries.
Download from Www.Somanuals.co2m3. All Manuals Search And Download.
• When the call log is full, the earliest entry will be deleted to make room
for new incoming call information.
• CID EMPTY will be displayed if there is no record in the call log.
n
Notes:
•
If you answer a call before the information appears on the screen, it will
not be stored in the call log.
•
•
The time on the handset screen is automatically set and updated with
incoming caller ID information if you subscribe to this service.
Due to regional service differences, the caller ID information may
not be available for every incoming call. In addition, the callers may
intentionally block their names and/or telephone numbers.
Review the Call log
1. Press /VOL-/CID to view the call log.
DISTINCT RING? N
8008437422
2. Press or to scroll through the entries.
There will be an error tone at the end of the call log
list and the screen will display END OF LIST.
n
Note: If you have programmed a home area code (page 12), only the
last seven digits of the incoming phone numbers from that area code will
be displayed while reviewing the call log. Press # repeatedly to display all
possible dialing options.
Make Call Log Entries Ready to Dial
Although the call log entries received have 10 digits
800-843-7422
(the area code plus the seven-digit number), in some
1-800-843-7422
areas, you may dial only the seven digits, or a 1 plus
843-7422
the seven digits, or a 1 plus the area code plus the
seven digits. You can change the number of digits that
you dial from or store in the call log.
1-843-7422
800-843-7422
1-800-843-7422
While reviewing the call log, press # repeatedly
to display different dialing options for local and
long distance numbers before dialing or saving the
telephone number in the directory. See the example
on the right.
843-7422
1-843-7422
Download from Www.Somanuals.co2m4. All Manuals Search And Download.
You may also press 1 repeatedly to add or remove a 1 in front of the
telephone number before dialing or saving it in the directory.
When the number displayed is in the correct format for dialing, press
/FLASH to call the number.
Dial a Call Log Number
1. Press /VOL-/CID to enter the call log.
2. Press or to select the desired entry, then press
-OR-
/FLASH.
1. Press /VOL-/CID to enter the call log.
2. Press or to select the desired entry.
3. Press SELECT, then DIAL flashes.
4. Press
/FLASH or SELECT.
Save a Call Log Entry to the Directory
1. Press /VOL-/CID to enter the call log.
2. Press or to select the desired entry. If you
wish to change how the number is saved, press
# repeatedly until the desired option displays.
See “Make Call Log Entries Ready to Dial” on page
24.
800-843-7422
NEW28
5:40PM
12/30
DIAL PROGRAM
3. Press SELECT, then press or until
800-843-7422
NEW28
PROGRAM flashes.
4. Press SELECT again.
5:40PM
12/30
5. Enter or edit the name if necessary. See
“Character Chart” on page 17.
• Press to move the cursor to the left or to the right.
• Press CHAN/REMOVE to erase a character.
Press SELECT to move on to the phone number.
ꢂ. Edit the number if necessary.
• Press to move the cursor to the left or to the right.
Download from Www.Somanuals.co2m5. All Manuals Search And Download.
• Press CHAN/REMOVE to erase a digit.
• Press REDIAL/PAUSE to insert a dialing pause (P will be displayed).
• Press SELECT to continue.
ꢀ. Press or to choose Y (yes) to customize this entry, or choose N
(no) for a normal ringer. If you choose Y, will be displayed with the
directory entry.
8. Press SELECT to confirm. You will hear a confirmation tone.
Delete from the Call Log
Delete one entry:
1. Press /VOL-/CID to enter the call log when the telephone is not in
use.
2. Press or to select the entry to be deleted.
3. Press CHAN/REMOVE. You will hear a confirmation beep.
Delete all entries:
1. Press and hold CHAN/REMOVE when the telephone is not in use. The
screen displays ERASE ALL? N Y. The current choice flashes.
2. Press until Y (yes) flashes.
3. Press SELECT. You will hear a confirmation beep.
Call Log Display Screen Messages
Displays:
When:
The caller is blocking the name information.
The caller is blocking the telephone number information.
The caller is blocking the name and number information.
This caller’s name is unavailable.
PRIVATE NAME
PRIVATE NUMBER
PRIVATE CALLER
UNKNOWN NAME
UNKNOWN NUMBER
UNKNOWN CALLER
This caller’s number is unavailable.
No call information is available about this caller.
Download from Www.Somanuals.co2mꢂ. All Manuals Search And Download.
Additional Information
Handset Display Screen Messages
Displays:
When:
The battery needs to be recharged.
There are no call log entries.
LOW BATTERY
CID EMPTY
The cordless handset is searching for the telephone base.
The cordless handset is searching for the telephone base.
The directory is full.
CONNECTING...
DIRECTORY EMPTY
MEMORY FULL
XX MISSED CALLS
There are unreviewed calls in the call log.
There are new voicemail message(s) from the local tele-
phone company.
NEW VOICEMAIL
The cordless handset locator has been activated.
The handset is in use.
**PAGING**
PHONE
There is an incoming call.
**RINGING**
RINGER OFF
SCANNING...
The handset ringer is turned off.
The telephone base is searching for another channel.
Battery
After the battery is fully charged for 16 hours, you can expect the following
performance:
Operation
Operating time
Five hours
While in use (talking)
While not in use (standby*)
Six days
*Handset is off the telephone base but not in use.
The battery needs charging when:
• A new battery is installed in the handset.
• The handset beeps when taken off the telephone base.
• LOW BATTERY is displayed and the battery icon on the handset screen is
flashing.
Download from Www.Somanuals.co2mꢀ. All Manuals Search And Download.
w
CAUTION:
•
Use only the battery provided or equivalent. To order a replacement,
•
Do not dispose of the battery in a fire. Check with local waste
management codes for special disposal instructions.
•
•
Do not open or mutilate the battery.
Exercise care in handling batteries in order not to create a short circuit
with conductive materials such as rings, bracelets, and keys. The battery
and/or conductor may overheat and cause burns.
•
Charge the battery provided with or identified for use with this product
only in accordance with the instructions and limitations specified in this
manual.
w
WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT
EXPOSE THIS PRODUCT TO WATER OR ANY TYPE OF MOISTURE.
Important Safety Instructions
When using your telephone equipment, basic safety precautions should
always be followed to reduce the risk of fire, electric shock and injury,
including the following:
1. Read, understand, and follow all warnings and instructions marked on
the product and in this manual.
2. Unplug this product from the wall outlet before cleaning. Do not use
liquid or aerosol cleaners. Use a damp cloth for cleaning.
3. Do not use this product near water (for example, near a bathtub, kitchen
sink, or swimming pool). Never spill liquid of any kind on the product.
4. Do not place this product on an unstable table, shelf, stand or other
unstable surfaces.
5. Slots and openings in the back or bottom of the telephone base and
handset are provided for ventilation. To protect them from overheating,
these openings must not be blocked by placing the product on a soft
surface such as a bed, sofa or rug. This product should never be placed
near or over a radiator or heat register. This product should not be
placed in any area where proper ventilation is not provided.
ꢂ. This product should be operated only from the type of power source
indicated on the marking label. If you are not sure of the type of power
supply in your home, consult your dealer or local power company.
Download from Www.Somanuals.co2m8. All Manuals Search And Download.
ꢀ. Do not allow anything to rest on the power cord. Do not install this
product where the cord may be walked on.
8. Never push objects of any kind into this product through the slots in the
telephone base or handset as they may touch dangerous voltage points
or create a short circuit that could result in a risk of fire or electric shock.
ꢁ. To reduce the risk of electric shock, do not disassemble this product,
but take it to an authorized service facility. Opening or removing
parts of the telephone base or handset other than specified access
doors may expose you to dangerous voltages or other risks.
Incorrect reassembling can cause electric shock when the product
is subsequently used, or if the product exhibits a distinct change in
performance.
10. Do not overload wall outlets and extension cords as this can result in
the risk of fire or electric shock.
11. Unplug this product from the wall outlet and refer servicing to an
authorized service facility under the following conditions:
• When the power supply cord or plug is damaged or frayed.
• If the product has been exposed to rain or water, or if liquid has been
spilled onto the product.
• If the product does not operate normally by following the operating
instructions. Adjust only those controls that are covered by the
operation instructions. Improper adjustment of other controls may
result in damage and often requires extensive work by an authorized
technician to restore the product to normal operation.
• If the product has been dropped and the telephone base and/or
handset has been damaged.
12. Avoid using a telephone (other than cordless) during an electrical
storm. There is a remote risk of electric shock from lightning.
13. Do not use the telephone to report a gas leak in the vicinity of the leak.
14. Only put the handset of your telephone next to your ear when it is in
normal talk mode.
15. The power adapter is intended to be correctly oriented in a vertical or
floor mount position. The prongs are not designed to hold the plug in
place if it is plugged into a ceiling or an under-the-table/cabinet outlet.
SAVE THESE INSTRUCTIONS
Download from Www.Somanuals.co2mꢁ. All Manuals Search And Download.
Troubleshooting
If you have difficulty with your telephone, please try the suggestions
below. For Customer Service, visit your local RadioShack store or go to
My telephone does not work at all.
• Make sure the battery is installed and charged correctly (page 6). For
optimum daily performance, return the handset to the telephone base
after use.
• Make sure the power adapter is securely plugged into an outlet not
controlled by a wall switch.
• Make sure the telephone line cord is plugged firmly into the telephone
base and the wall jack.
• Unplug the unit’s electrical power. Wait for approximately 15 seconds,
then plug it back in. Allow up to one minute for the handset and
telephone base to synchronize.
• Charge the battery in the handset for at least 16 hours.
• Remove and re-insert the battery. If that still does not work, it may be
necessary to purchase a new battery.
• Disconnect the telephone base from the jack and plug in a working
telephone. If this telephone does not work, call the local telephone
company.
LOW BATTERY is displayed on screen.
• Place the handset in the telephone base for recharging.
• Remove and re-install the battery and use it normally until fully depleted,
then recharge the handset in the telephone base for 16 hours.
• If the above measures do not correct the problem, the battery may need
to be replaced.
The battery does not charge in the handset or the handset battery
does not accept charge.
• Make sure the handset is placed in the telephone base correctly and the
handset CHARGE light on the handset is on.
• Remove the battery from the handset and then re-install it in the
handset. Put the handset back to the telephone base and charge for 16
hours.
Download from Www.Somanuals.co3m0. All Manuals Search And Download.
• If the handset is in the telephone base but the handset CHARGE light is
not on, see The charge light is off in this section.
• It may be necessary to purchase a new battery. Please see “Battery” on
page 27.
• The telephone might be malfunctioning. Please see “Limited Warranty” on
page 40 for further instruction.
The CHARGE light is off.
• Clean the charging contacts on the handset and telephone base each
month using a pencil eraser or a dry non-abrasive fabric.
• Make sure the power adapter and telephone line cords are plugged in
correctly and securely.
• Unplug the power adapter. Wait for 15 seconds before plugging it back
in. Allow up to one minute for the handset and telephone base to reset.
• The telephone might be malfunctioning. Please see “Limited Warranty” on
page 40 for further instruction.
The talk time and standby time of my handset is noticeably shorter than
before.
• Completely charge and drain the battery two or three times
consecutively every three months instead of returning the handset to the
telephone base or charger after each use. If the performance does not
improve, please buy a new battery.
There is no dial tone.
• First, try all the above suggestions.
• Move the handset closer to the telephone base. It might be out of
range.
• The telephone line cord might be malfunctioning. Try installing a new
telephone line cord.
• Disconnect the telephone base from the telephone jack and connect
a different telephone. If there is no dial tone on the other telephone
either, contact your local telephone company.
My handset displays CONNECTING...
• Move the handset closer to the telephone base. You might have moved
out of range.
Download from Www.Somanuals.co3m1. All Manuals Search And Download.
The telephone does not ring when there is an incoming call.
• Make sure the ringer is on (page 10).
• Make sure the telephone line cord and power adapter are plugged in
properly (page 5).
• The handset may be too far from the telephone base. Move it closer to
the telephone base.
• There may be too many extension telephones on the telephone line to
allow all of them to ring simultaneously. Try unplugging some of them.
• If the other telephones in your home are having the same problem,
contact the local telephone company (charges may apply).
• Other electronic products can cause interference to your cordless
telephone. Try installing your telephone as far away as possible from
the following electronic devices: wireless routers, radios, radio towers,
pager towers, cellular telephones, digital telephones, intercoms, room
monitors, televisions, VCRs, personal computers, kitchen appliances,
and other cordless telephones.
• Test a working telephone at the telephone jack. If another telephone has
the same problem, contact your local telephone company (charges may
apply).
• The telephone line cord might be malfunctioning. Try installing a new
telephone line cord.
• Remove and re-insert the battery and place the handset in the
telephone base.
• Wait for the handset to synchronize with the telephone base. Allow up
to one minute for this to take place.
I cannot dial out.
• First, try all the above suggestions.
• Make sure there is a dial tone before dialing. It is normal if the handset
takes a second or two to synchronize with the telephone base before
producing a dial tone. Wait an extra second before dialing.
• Make sure the telephone is set to the correct dial type (pulse dial or
tone dial) for the service in your area. See “Dial Mode” on page 11 to set
the dial type.
Download from Www.Somanuals.co3m2. All Manuals Search And Download.
• If the other telephones in your home are having the same problem,
contact your local telephone company (charges may apply).
• Eliminate any background noise. If you cannot eliminate the background
noise, first try muting the handset before dialing, or dialing from another
room in your home with less background noise.
There is noise or interference during a telephone conversation.
My calls cut in and out when I am using the cordless handset.
• The handset may be out of range. Move it closer to the telephone base.
• Appliances or other cordless telephones plugged into the same circuit
as the telephone base can cause interference. Try moving the appliance
or telephone base to another outlet.
• Other electronic products can cause interference to your cordless
telephone. Try installing your telephone as far away as possible from
the following electronic devices: wireless routers, radios, radio towers,
pager towers, cellular telephones, digital telephones, intercoms, room
monitors, televisions, VCRs, personal computers, kitchen appliances,
and other cordless telephones.
• If your telephone is plugged in with a modem or a surge protector, plug
the telephone (or modem/surge protector) into a different location. If
this doesn’t solve the problem, re-locate your telephone or modem
farther apart from each other, or use a different surge protector.
• The layout of your home or office might be limiting the operating range.
Try moving the telephone base to another location, preferably a higher
location for better reception.
• Disconnect the telephone base from the telephone jack and plug in a
corded telephone. If calls are still not clear, contact the local telephone
company (charges may apply).
• If the other telephones in your home are having the same problem,
contact the local telephone company (charges may apply).
• If you subscribe to high-speed Internet service (Digital Subscriber Line -
DSL) through your telephone lines, you must install a DSL filter between
the telephone base and the telephone wall jack to prevent noise and
caller ID problems caused by DSL interference. Please contact your DSL
service provider for more information about DSL filters.
Download from Www.Somanuals.co3m3. All Manuals Search And Download.
I hear other calls when using the telephone.
• Disconnect the telephone base from the telephone jack. Plug in a
different telephone. If there are still other calls, call your local telephone
company.
• Press CHAN/REMOVE to switch to a clearer channel when on a call.
I hear noise in the handset, and none of the keys or buttons work.
• Make sure the telephone line cord is plugged in securely.
• Remove and re-insert the battery.
My caller ID features are not working properly.
• Caller ID is a subscription service. You must subscribe to this service
from your local telephone company for this feature to work on your
telephone.
• The caller may not be calling from an area which supports caller ID.
• Both you and the caller’s telephone companies must use equipment
which are compatible with caller ID service.
• If you subscribe to high-speed Internet service (Digital Subscriber Line -
DSL) through your telephone lines, you must install a DSL filter between
the telephone base and the telephone wall jack to prevent noise and
caller ID problems caused by DSL interference. Please contact your DSL
service provider for more information about DSL filters.
The system does not receive caller ID, or the system does not display
caller ID during call waiting.
• Make sure you subscribe to caller ID with call waiting features provided
by the local telephone company.
• The caller may not be calling from an area which supports caller ID.
• Both you and the caller’s telephone companies must use equipment
compatible with caller ID service.
• If you subscribe to high-speed Internet service (Digital Subscriber Line -
DSL) through your telephone lines, you must install a DSL filter between
the telephone base and the telephone wall jack to prevent noise and
caller ID problems caused by DSL interference. Please contact your DSL
service provider for more information about DSL filters.
Download from Www.Somanuals.co3m4. All Manuals Search And Download.
Caller ID entries do not match the numbers I need to dial.
• Although the call log entries you receive have 10 digits, (the area code
plus the seven-digit number,) in some areas, you may need to dial only
seven digits, or a 1 plus the seven digits, or a 1 plus the area code plus
the seven digits. You can change the number of digits that you dial or
store from the call log.
• While reviewing the call log, press # repeatedly to display these dialing
options for local and long distance numbers before dialing or saving the
telephone number.
My cordless handset beeps and is not performing normally.
• Make sure the power cord is securely plugged into the telephone base.
Plug the unit into a different working electrical outlet not controlled by a
wall switch.
• Move the handset closer to the telephone base. It may be out of range.
• Reset the telephone base by unplugging the unit’s electrical power. Wait
for 15 seconds and plug it back in again. Allow up to one minute for the
handset and the telephone base to synchronize.
• Other electronic products can cause interference to your cordless
telephone. Try installing your telephone as far away from these
electronic devices as possible: wireless routers, radios, radio towers,
pager towers, cellular telephones, intercoms, room monitors, televisions,
personal computers, kitchen appliances and other cordless telephones.
Common cure for electronic equipment
If the unit is not responding normally, try putting the handset in the
telephone base. If it does not respond, try the following (in the order listed):
• Disconnect the power to the telephone base.
• Disconnect the battery on the handset.
• Wait a few minutes before connecting the power to the telephone base.
• Re-install the battery and place the handset in the telephone base.
• Wait for the handset to synchronize with the telephone base. Allow up
to one minute for this to take place.
Download from Www.Somanuals.co3m5. All Manuals Search And Download.
Operating Range
This cordless telephone operates with the maximum power allowed by the
Federal Communications Commission (FCC). Even so, this handset and
telephone base can communicate over only a certain distance, which can
vary with the locations of the telephone base and handset, the weather, and
the layout of your home or office.
When the handset is out of range, the handset will display CONNECTING...
If there is a call while the handset is out of range, it might not ring, or if it
does ring, the call might not connect well when you press
/FLASH. Move
closer to the telephone base, then press /FLASH to answer the call.
If the handset moves out of range during a telephone conversation, there
might be interference.
To improve reception, move closer to the telephone base.
Maintenance
Your cordless telephone contains sophisticated electronic parts and must
be treated with care.
Place the handset down gently. Save the original packing materials to
protect your telephone if you ever need to ship it.
Your telephone can be damaged if it gets wet. Do not use the handset
outdoors in the rain, or handle it with wet hands. Do not install the
telephone base near a sink, bathtub or shower.
Electrical storms can sometimes cause power surges harmful to electronic
equipment. For your own safety, take caution when using electrical
appliances during storms.
Your telephone has a durable plastic casing that should retain its luster for
many years. Clean it only with a soft cloth slightly dampened with water or a
mild soap. Do not use excess water or cleaning solvents of any kind.
Remember that electrical appliances can cause serious injury if used when
you are wet or standing in the water. If the telephone base should fall into
the water, DO NOT RETRIEVE IT UNTIL YOU UNPLUG THE POWER CORD
AND TELEPHONE LINE CORD FROM THE WALL. Then pull the unit out by
the unplugged cords.
Download from Www.Somanuals.co3mꢂ. All Manuals Search And Download.
About Cordless Telephones
• Privacy: There is a possibility that the cordless telephone conversations
could be intercepted by radio receiving equipment within range of
the cordless handset. You should not think of cordless telephone
conversations as being as private as those on corded telephones.
• Electrical Power: The telephone base of this cordless telephone must
be connected to a working electrical outlet not be controlled by a wall
switch.
• Potential TV interference: To minimize or prevent interference from
cordless telephones, do not place the telephone base of the cordless
telephone near or on top of a TV or VCR. Moving the cordless
telephone farther away from the TV or VCR will often reduce or eliminate
the interference.
• Rechargeable batteries: This product contains either nickel-cadmium or
nickel-metal hydride rechargeable batteries. Exercise care in handling
batteries in order not to create a short circuit with conducting material
such as rings, bracelets, and keys. The battery or conductor may
overheat and cause harm. Observe proper polarity between the battery
and the battery charger.
• Nickel-cadmium rechargeable batteries: Dispose of these batteries in a
safe manner. Do not burn or puncture the battery.
Download from Www.Somanuals.co3mꢀ. All Manuals Search And Download.
Specifications
Frequency control
Crystal controlled PLL synthesizer
Handset: 5857.20-5865.90 MHz
Telephone base: 912.75-917.10MHz
30
Transmit frequency
Channels
Maximum power allowed by FCC and IC.
Actual operating range may vary according to
environmental conditions at the time of use.
Nominal effective range
Handset: 7.32in X 2.01in X 1.57in
(186.0mm X 51.0mm X 40.0mm)
Size
Telephone base: 4.33in X 5.34in X 3.78in
(110.0mm X 135.6mm X 96.0mm)
Handset: 5.14oz (145.6g) (including battery)
Telephone base: 5.26oz (149g)
Weight
Handset: 3.6V 400mAh Ni-Cd battery
Telephone base: 7.5V AC @ 200mA
Power requirements
Memory
Handset directory: 20 memory locations (9 speed
dial inclusive); up to 24 digits and
14 characters
Handset call log: 45 memory locations; up to 11
digits and 15 characters
FCC Information
This equipment has been tested and found to comply with the requirements
for a Class B digital device under Part 15 of the Federal Communications
Commission (FCC) rules. These requirements are intended to provide
reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there
is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by one or more of
the following measures:
Download from Www.Somanuals.co3m8. All Manuals Search And Download.
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
• Consult your local RadioShack store or an experienced radio/TV
technician for help.
Changes or modifications not expressly approved by RadioShack may
cause interference and void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC rules. Operation is subject
to the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation. Privacy of
communications may not be ensured when using this telephone.
To ensure safety of users, the FCC has established criteria for the amount of
radio frequency energy that can be safely absorbed by a user or bystander
according to the intended usage of the product. This product has been
tested and found to comply with the FCC criteria. The handset may be
safely held against the ear of the user. The telephone base shall be installed
and used such that parts of the user’s body other than the hands are
maintained at a distance of approximately 20 cm (8 inches) or more.
This equipment complies with Part 68 of the FCC rules and with technical
requirements adopted by the Administrative Council for Terminal
Attachments (ACTA). The label on the back or bottom of this equipment
contains, among other things, a product identifier in the format US:
AAAEQ##TXXXX. This identifier must be provided to your local telephone
company upon request.
The plug and jack used to connect this equipment to premises wiring and
the telephone network must comply with applicable Part 68 rules and
technical requirements adopted by ACTA. A compliant telephone cord and
modular plug is provided with this product. It is designed to be connected
to a compatible modular jack that is also compliant. An RJ11 jack should
normally be used for connecting to a single line and an RJ14 jack for two
lines. See Installation Instructions in the user’s manual.
The Ringer Equivalence Number (REN) is used to determine how many
devices you may connect to your telephone line and still have them ring
when you are called. The REN for this product is encoded as the 6th and
7th characters following the US: in the product identifier (e.g., if ## is 03,
Download from Www.Somanuals.co3mꢁ. All Manuals Search And Download.
the REN is 0.3). In most, but not all areas, the sum of all RENs should be
five (5.0) or less. For more information, please contact your local telephone
company.
This equipment may not be used with Party Lines. If you have specially
wired alarm dialing equipment connected to your telephone line, ensure
the connection of this equipment does not disable your alarm equipment.
If you have questions about what will disable alarm equipment, consult your
telephone company or a qualified installer.
If this equipment is malfunctioning, it must be unplugged from the modular
jack until the problem has been corrected. Repairs to this telephone
equipment can only be made by the manufacturer or its authorized agents.
For repair procedures, follow the instructions outlined under the Limited
Warranty.
Limited Warranty
RadioShack warrants this product against defects in materials and
workmanship under normal use by the original purchaser for ninety (90)
days after the date of purchase from a RadioShack-owned store or an
authorized RadioShack franchisee or dealer. RADIOSHACK MAKES NO
OTHER EXPRESS WARRANTIES.
This warranty does not cover: (a) damage or failure caused by or attributable
to abuse, misuse, failure to follow instructions, improper installation or
maintenance, alteration, accident, Acts of God (such as floods or lightning),
or excess voltage or current; (b) improper or incorrectly performed repairs
by persons who are not a RadioShack Authorized Service Facility; (c)
consumables such as fuses or batteries; (d) ordinary wear and tear or
cosmetic damage; (e) transportation, shipping or insurance costs; (f) costs
of product removal, installation, set-up service, adjustment or reinstallation;
and (g) claims by persons other than the original purchaser.
Should a problem occur that is covered by this warranty, take the
product and the RadioShack sales receipt as proof of purchase date to
any RadioShack store in the U.S. RadioShack will, at its option, unless
otherwise provided by law: (a) repair the product without charge for parts
and labor; (b) replace the product with the same or a comparable product;
or (c) refund the purchase price. All replaced parts and products, and
products on which a refund is made, become the property of RadioShack.
New or reconditioned parts and products may be used in the performance
of warranty service. Repaired or replaced parts and products are warranted
Download from Www.Somanuals.co4m0. All Manuals Search And Download.
for the remainder of the original warranty period. You will be charged
for repair or replacement of the product made after the expiration of the
warranty period.
RADIOSHACK EXPRESSLY DISCLAIMS ALL WARRANTIES AND
CONDITIONS NOT STATED IN THIS LIMITED WARRANTY. ANY IMPLIED
WARRANTIES THAT MAY BE IMPOSED BY LAW, INCLUDING THE IMPLIED
WARRANTY OF MERCHANTABILITY AND, IF APPLICABLE, THE IMPLIED
WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE, SHALL EXPIRE
ON THE EXPIRATION OF THE STATED WARRANTY PERIOD.
EXCEPT AS DESCRIBED ABOVE, RADIOSHACK SHALL HAVE NO
LIABILITY OR RESPONSIBILITY TO THE PURCHASER OF THE PRODUCT
OR ANY OTHER PERSON OR ENTITY WITH RESPECT TO ANY LIABILITY,
LOSS OR DAMAGE CAUSED DIRECTLY OR INDIRECTLY BY USE OR
PERFORMANCE OF THE PRODUCT OR ARISING OUT OF ANY BREACH
OF THIS WARRANTY, INCLUDING, BUT NOT LIMITED TO, ANY DAMAGES
RESULTING FROM INCONVENIENCE AND ANY LOSS OF TIME, DATA,
PROPERTY, REVENUE, OR PROFIT AND ANY INDIRECT, SPECIAL,
INCIDENTAL, OR CONSEQUENTIAL DAMAGES, EVEN IF RADIOSHACK
HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
Some States do not allow limitations on how long an implied warranty lasts
or the exclusion or limitation of incidental or consequential damages, so the
above limitations or exclusions may not apply to you. This warranty gives
you specific legal rights, and you may also have other rights which vary from
State to State. You may contact RadioShack at:
RadioShack Customer Relations
300 RadioShack Circle, Fort Worth, TX 76102
04/08
Download from Www.Somanuals.co4m1. All Manuals Search And Download.
Download from Www.Somanuals.co4m2. All Manuals Search And Download.
Download from Www.Somanuals.co4m3. All Manuals Search And Download.
Protect the environment by recyclying your used electronics.
Go to E-CyclingCentral.com to find an electronic recycling
center near you.
©2009. RadioShack Corporation.
Printed
in China
07A09
43-324
All rights reserved. RadioShack and RadioShack.com are
trademarks used by RadioShack Corporation.
Download from Www.Somanuals.com. All Manuals Search And Download.
|