Radio Shack Clock 63 969 User Guide

63-969.fm Page 1 Monday, September 27, 1999 9:19 AM  
Cat. No. 63-969  
OWNER’S MANUAL  
Please read before using this equipment.  
Projection Clock  
Download from Www.Somanuals.com. All Manuals Search And Download.  
63-969.fm Page 2 Monday, September 27, 1999 9:19 AM  
FEATURES  
Your RadioShack Projection Clock combines a simple  
design with advanced technology. You can set the clock  
so it projects the current time on a wall or the ceiling for  
easy nighttime viewing. Its features include:  
Adjustable Projection Light — lets you project the time  
on any location on a wall or ceiling. This lets you easily  
see the time at night.  
Large Liquid Crystal Display — makes the clock easy  
to read. The current time and alarm time, the time zone  
you are in, and the date and day of the week appear on  
the display.  
Crescendo Alarm — the alarm sounds a series of beeps  
that gradually increase in volume.  
Snooze Control — temporarily silences the alarm for  
about 8 minutes so you can sleep a little longer.  
Display Backlight — lets you see all information on the  
display even when it is dark.  
Supplied AC Adapter — lets you power the clock’s pro-  
jection light to help extend battery life.  
Three Languages — let you view the day of the week in  
English, French, or Spanish.  
© 1999 Tandy Corporation.  
All Rights Reserved.  
RadioShack is a registered trademark used by Tandy Corporation.  
2
Download from Www.Somanuals.com. All Manuals Search And Download.  
63-969.fm Page 3 Monday, September 27, 1999 9:19 AM  
Three Languages — let you view the day of the week in  
English, French, or Spanish.  
WARNING: To reduce the risk of fire or shock hazard, do not ex-  
pose this product to rain or moisture.  
CAUTION  
RISK OF ELECTRIC SHOCK. DO NOT  
!
OPEN.  
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,  
DO NOT REMOVE COVER OR BACK. NO USER-SERVICE-  
ABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED PER-  
SONNEL.  
This symbol is intended to alert you to the pres-  
ence of uninsulated dangerous voltage within the  
product’s enclosure that might be of sufficient  
magnitude to constitute a risk of electric shock.  
Do not open the product’s case.  
This symbol is intended to inform you that impor-  
tant operating and maintenance instructions are  
included in the literature accompanying this prod-  
uct.  
!
Note: You need the supplied AC adapter and two AA bat-  
teries (not supplied) to power the projection light.  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
63-969.fm Page 4 Monday, September 27, 1999 9:19 AM  
PREPARATION  
INSTALLING BATTERIES  
Your clock requires two AA batteries (not supplied) for  
power. For the best performance and longest life, we rec-  
ommend RadioShack alkaline batteries.  
Cautions:  
• Use only fresh batteries of the required size and rec-  
ommended type.  
• Do not mix old and new batteries, different types of  
batteries (standard, alkaline, or rechargeable), or  
rechargeable batteries of different capacities.  
Follow these steps to install batteries.  
1. Slide the battery compartment cover in the direction  
of the arrow to remove it.  
2. Place the batteries in the compartment as indicated  
by the polarity symbols (+ and –) marked inside.  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
63-969.fm Page 5 Monday, September 27, 1999 9:19 AM  
When you install batteries, all display segments  
briefly appear. Then AM12:00appears, followed by  
the seconds display. 1appears below MONTHand 1  
appears below DATE, indicating January 1. P (the  
default time zone) appears above the zone indicator.  
Note: The clock is preset to display the day of the  
week in English. To set the clock to display in another  
language, see “Setting the Clock” on Page 7.  
3. Replace the cover.  
When BATTappears or the clock stops operating proper-  
ly, replace the batteries.  
Warning: Dispose of old batteries promptly and properly.  
Do not burn or bury them.  
Caution: If you do not plan to use the clock for a month  
or more, remove the batteries. Batteries can leak chemi-  
cals that can destroy electronic parts.  
CONNECTING TO AC POWER  
Your clock comes with an AC adapter so you can operate  
the clock’s projector light continuously from AC power.  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
63-969.fm Page 6 Monday, September 27, 1999 9:19 AM  
Caution: You must use a Class 2 power source  
that supplies 3 volts DC and delivers at least  
!
200 mA. Its center tip must be set to positive  
and its plug must fit the clock's DC 3V jack. The supplied  
adapter meets these specifications. Using an adapter  
that does not meet these specifications could damage  
the clock or the adapter.  
Follow these steps to connect the AC adapter to the  
clock.  
1. Slide the battery compartment cover in the direction  
of the arrow to remove it.  
2. Plug the AC adapter’s tip into the jack inside the bat-  
tery compartment.  
3. Route the adapter’s cord through the slot marked DC  
3V on the back of the clock.  
4. Replace the cover.  
5. Plug the AC adapter’s other end into a standard AC  
outlet.  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
63-969.fm Page 7 Monday, September 27, 1999 9:19 AM  
SETTING THE CLOCK  
1. Repeatedly press ZONE to select the time zone you  
are in (Pacific, Mountain, Central, or Eastern). As you  
press ZONE, the time zone you select is highlighted  
and a letter (Pfor Pacific, Mfor Mountain, Cfor Cen-  
tral, or Efor Eastern) appears above the zone indica-  
tor.  
2. Hold down MODE/SET until the hour digit flashes.  
3. Repeatedly press +. The hour advances by 1 with  
each press. (Hold down + to rapidly advance the  
hour).  
Note: AMappears for AM hours and PM appears for  
PM hours.  
4. Press MODE/SET. The minute digits flash.  
5. Hold down or repeatedly press + to set the minute.  
6. Press MODE/SET. The year digits flash.  
7. Repeatedly press + to set the year.  
8. Press MODE/SET. The current hour, minute, and day  
of the week appear, and the month digit flashes.  
9. Hold down or repeatedly press + to set the month.  
10. Press MODE/SET. The date digit flashes.  
11. Repeatedly press + to set the date.  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
63-969.fm Page 8 Monday, September 27, 1999 9:19 AM  
12. Press MODE/SET. A letter representing the language  
used for the day of the week (E for English, F for  
French, or Sfor Spanish) appears.  
13. Repeatedly press + to select the desired language.  
14. Press MODE/SET. The time, time zone, and date set-  
tings appear.  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
63-969.fm Page 9 Monday, September 27, 1999 9:19 AM  
OPERATION  
To switch between viewing the seconds display and the  
day of the week, press MODE/SET. To switch between  
viewing the month/date and the alarm time, press ALARM  
STOP/ALARM SET.  
To view the time in another time zone, repeatedly press  
ZONE to highlight the zone you want. The time in that  
time zone appears.  
To light the display for about 5 seconds, press SNOOZE/  
LIGHT.  
USING THE PROJECTION LIGHT  
You can use the clock’s projection light to project the time  
on a wall or ceiling.  
To project the time, place the clock at least 18 inches  
from the surface you are projecting onto, adjust the pro-  
jection arm to project light onto the surface where you  
want to see the time, then slide PROJECTION LIGHT ON  
on the back of the clock in the direction of the arrow.  
Projection Arm  
PROJECTION  
LIGHT ON  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
63-969.fm Page 10 Monday, September 27, 1999 9:19 AM  
Caution: The projection arm moves about 90 degrees in  
either direction. Do not force it.  
To focus the time on the desired position, adjust FOCUS  
on the side of the projection arm.  
To turn off the projection light, slide PROJECTION LIGHT  
ON toward the projection arm.  
With the projection light off, you can also project the time  
by pressing SNOOZE/LIGHT. The projector lights for about  
5 seconds then automatically turns off.  
USING THE ALARM  
Setting the Alarm Time  
Note: If you do not press a button within about 90 sec-  
onds after you pressed the previous button, the clock ex-  
its its alarm setup mode. Start over at Step 1.  
1. Hold down ALARM STOP/ALARM SET until the alarm  
time and  
2. Hold down or repeatedly press +.  
alarm hour advances by 1 with each press.  
appear. The hour digit flashes.  
appears and the  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
63-969.fm Page 11 Monday, September 27, 1999 9:19 AM  
3. Press ALARM STOP/ALARM SET. The minute digit  
flashes.  
4. Hold down or repeatedly press + to set the alarm  
minute.  
5. Press ALARM STOP/ALARM SET. The alarm time  
appears.  
Notes:  
• Repeatedly press ALARM STOP/ALARM SET to switch  
between viewing the alarm time and the month and  
date.  
• The alarm sounds whether the alarm time is dis-  
played or not.  
Turning the Alarm On/Off  
The alarm automatically turns on when you set an alarm  
time. To manually turn on the alarm, press ALARM ON/  
OFF.  
appears.  
At the set alarm time, the display lights for about 14 sec-  
onds, flashes, and the alarm sounds one soft beep  
every 2 seconds.  
After 20 seconds, 2 quick beeps sound every 2 seconds  
and the volume increases slightly. After 20 more sec-  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
63-969.fm Page 12 Monday, September 27, 1999 9:19 AM  
onds, 3 quick beeps sound every 2 seconds and the vol-  
ume increases again to its maximum level. After another  
20 seconds, the beeping becomes continuous (about 4  
beeps per second) and sounds for about 1 minute.  
To silence the alarm, press ALARM STOP/ALARM SET.  
remains on the display and the alarm sounds at the  
set alarm time the next day. If you do not silence the  
alarm, it automatically turns off after 2 minutes. The first  
time this happens, the snooze feature activates and  
continues to flash. In about 8 minutes, the alarm sounds  
again. If the alarm turns off automatically a second time,  
remains on the display and the alarm will not sound  
again until the set alarm time the next day.  
Note: When the alarm sounds, the projection light and  
backlight turn on for about 14 seconds.  
To turn off the alarm so it does not sound the next day,  
press ALARM ON/OFF.  
disappears.  
Using SNOOZE/LIGHT  
When the alarm sounds, you can press SNOOZE/LIGHT  
to silence the alarm for about 8 minutes.  
ter 8 minutes, the alarm sounds again.  
flashes. Af-  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
63-969.fm Page 13 Monday, September 27, 1999 9:19 AM  
CARE AND MAINTENANCE  
Your RadioShack Projection Clock is an example of su-  
perior design and craftsmanship. The following sugges-  
tions will help you care for your clock so you can enjoy it  
for years.  
Keep the clock dry. If it gets wet, wipe it dry im-  
mediately. Liquids might contain minerals that  
can corrode the electronic circuits.  
Use and store the clock only in normal temper-  
ature environments. Temperature extremes  
can shorten the life of electronic devices, dam-  
age batteries, and distort or melt plastic parts.  
Keep the clock away from dust and dirt, which  
can cause premature wear of parts.  
Handle the clock gently and carefully. Dropping  
it can damage circuit boards and cases and  
can cause the clock to work improperly.  
Use only fresh batteries of the required size  
and recommended type. Batteries can leak  
chemicals that damage your clock’s electronic  
parts.  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
63-969.fm Page 14 Monday, September 27, 1999 9:19 AM  
Wipe the clock with a damp cloth occasionally  
to keep it looking new. Do not use harsh chem-  
icals, cleaning solvents, or strong detergents to  
clean the clock.  
Modifying or tampering with the clock’s internal compo-  
nents can cause a malfunction and might invalidate its  
warranty. If your clock is not performing as it should, take  
it to your local RadioShack store for assistance.  
RESETTING THE CLOCK  
If the clock does not work properly or locks up, you can  
reset it. Open the battery compartment and use a pointed  
object such as a straightened paper clip to press RESET.  
All display segments briefly appear. Follow the steps list-  
ed in “Setting the Clock” on Page 7 to set the clock again.  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
63-969.fm Page 15 Monday, September 27, 1999 9:19 AM  
SPECIFICATIONS  
Operating Temperature ............................. 32°F to 109°F  
(0°C to 43°C)  
Power Sources:  
Batteries ............................................................. 2 AA  
AC Adapter .......... 3V DC/200 mA, Center Tip Positive  
Snooze Time ......................................... About 8 Minutes  
Accuracy ............................................. ± 0.5 Second/Day  
Dimensions (HWD) ....................... 4 59/16 15/8 Inches  
(101.6 141.3 41.3 mm)  
Weight (Without Batteries) .................................... 8.5 oz  
(241 g)  
(Without AC Adapter)  
Included Accessory ...................................... AC Adapter  
Specifications are typical; individual units might vary.  
Specifications are subject to change and improvement  
without notice.  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
63-969.fm Page 16 Monday, September 27, 1999 9:19 AM  
Limited One-Year Warranty  
This product is warranted by RadioShack against manufacturing defects in material  
and workmanship under normal use for one (1) year from the date of purchase from  
RadioShack company-owned stores and authorized RadioShack franchisees and  
dealers. EXCEPT AS PROVIDED HEREIN, RadioShack MAKES NO EXPRESS  
WARRANTIES AND ANY IMPLIED WARRANTIES, INCLUDING THOSE OF MER-  
CHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED  
IN DURATION TO THE DURATION OF THE WRITTEN LIMITED WARRANTIES  
CONTAINED HEREIN. EXCEPT AS PROVIDED HEREIN, RadioShack SHALL  
HAVE NO LIABILITY OR RESPONSIBILITY TO CUSTOMER OR ANY OTHER  
PERSON OR ENTITY WITH RESPECT TO ANY LIABILITY, LOSS OR DAMAGE  
CAUSED DIRECTLY OR INDIRECTLY BY USE OR PERFORMANCE OF THE  
PRODUCT OR ARISING OUT OF ANY BREACH OF THIS WARRANTY, INCLUD-  
ING, BUT NOT LIMITED TO, ANY DAMAGES RESULTING FROM INCONVE-  
NIENCE, LOSS OF TIME, DATA, PROPERTY, REVENUE, OR PROFIT OR ANY  
INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, EVEN IF  
RadioShack HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.  
Some states do not allow the limitations on how long an implied warranty lasts or  
the exclusion of incidental or consequential damages, so the above limitations or  
exclusions may not apply to you.  
In the event of a product defect during the warranty period, take the product and the  
RadioShack sales receipt as proof of purchase date to any RadioShack store. Ra-  
dioShack will, at its option, unless otherwise provided by law: (a) correct the defect  
by product repair without charge for parts and labor; (b) replace the product with  
one of the same or similar design; or (c) refund the purchase price. All replaced  
parts and products, and products on which a refund is made, become the property  
of RadioShack. New or reconditioned parts and products may be used in the per-  
formance of warranty service. Repaired or replaced parts and products are war-  
ranted for the remainder of the original warranty period. You will be charged for  
repair or replacement of the product made after the expiration of the warranty pe-  
riod.  
This warranty does not cover: (a) damage or failure caused by or attributable to  
acts of God, abuse, accident, misuse, improper or abnormal usage, failure to follow  
instructions, improper installation or maintenance, alteration, lightning or other inci-  
dence of excess voltage or current; (b) any repairs other than those provided by a  
RadioShack Authorized Service Facility; (c) consumables such as fuses or batter-  
ies; (d) cosmetic damage; (e) transportation, shipping or insurance costs; or (f)  
costs of product removal, installation, set-up service adjustment or reinstallation.  
This warranty gives you specific legal rights, and you may also have other rights  
which vary from state to state.  
RadioShack Customer Relations, 200 Taylor Street, 6th Floor, Fort Worth, TX  
76102  
04/99  
We Service What We Sell  
09A99  
Printed in Hong Kong  
Download from Www.Somanuals.com. All Manuals Search And Download.  

RCA Clock Radio 7 4825 User Guide
RCA Flat Panel Television RLED4250A User Guide
Ricoh Printer Aficio AP2700 User Guide
Rimage Printer EverestTM Printer User Guide
Rinnai Furnace RHFE 431FA User Guide
Roland Electronic Keyboard AT 80S User Guide
Rose electronic Computer Monitor DVI D User Guide
Rosewill Network Card RWND N1501UB User Guide
Russell Hobbs Appliance Trim Kit RHSLDW1B User Guide
Samson Microphone CL8 User Guide