Advance CID/Call Waiting ID Box
with Blue Backlight and 10-Number VIP
OWNER’S MANUAL —
Please read before using this equipment.
43-3903
The display is
Thank you for purchasing a RadioShack Advance
CID/Call Waiting ID Box. Your Caller ID box stores and
displays up to 64 Caller ID records. It displays the caller’s
telephone number (and name, if available in your area) and
the current date and time, as provided by your local phone
company to Caller ID service subscribers.
protected by a
piece of film
during ship-
ment. Peel off
this film before
you use the
Caller ID box.
Where Caller ID is offered, one or more of the following
options are generally available.
!
Press to
delete Caller
ID records, or
confirm
programmed
information.
• caller’s number only
• caller’s name only
• caller’s name and number
Press to call
backanumber
and program
callback
The actual number of Caller ID records your Caller ID box
stores depends on the Caller ID information sent by the phone
company.
Press to scroll
NEW VIP
Call Light
through Caller ID
records and program
the Caller ID box.
Press to save and
work with a list of
important callers.
options.
CONNECTING THE
AC ADAPTER
CALLER ID BOX SETUP
IMPORTANT
To use this Caller ID box, you must be in an
area where Caller ID service is available, and
you must subscribe to the service.
!
!
Caller ID is a service provided by your tele-
phone company. When you subscribe to this
service, between the first and second rings,
the telephone company sends the caller’s
telephone number (and name, if available) and
the call’s date and time. The Caller ID box
receives and displays this information for each
call and updates the display with the current
date and time. Your Caller ID box saves up
to 64 Caller ID records, then replaces the
oldest Caller ID record with each new one.
To power the system, plug the
supplied Class 2 AC adapter’s
barrel plug into DC 6V 200 mA on the
back of the Caller ID box. Then connect the
other end of the adapter to a standard AC
outlet. Ô
!
Ô NOTE Ô
• The backlight does not work if the AC
adapter is disconnected.
• The USOC number for both the single-line
and two-line jacks to be installed is RJ11C
(or RJ11W for a wall plate jack).
CALLER ID BOX CONNECTION
Your Caller ID box is ETL listed to UL
standards and meets all applicable FCC
requirements.
If your home has specially wired alarm
equipment connected to the telephone line,
be sure that installing the Caller ID box does INSTALLING BATTERIES
not disable your alarm equipment. If you
You need four AA
Your Caller ID box connects directly to a
modular telephone line jack. If your
telephone wiring does not have a modular
jack, you can update the wiring yourself
using jacks and adapters (available at your
local RadioShack store), or have the
telephone company update the wiring for
you. You must use compatible modular
jacks that are compliant with Part 68 of FCC
Rules and the requirements adopted by the
ACTA. The telephone cord and modular
plug provided is Part 68 compliant for
connecting to the telephone company
network. Ô
have questions about what will disable your
alarm equipment, contact your telephone
company or a qualified installer.
batteries (not
supplied) to power
and protect the
Caller ID box’s
memory during a
power failure.
Ô BATTERY NOTES Ô
• Dispose of dead batteries promptly and
properly.
Batteries are
available at your
local RadioShack
store or online at
• Do not burn or bury batteries.
• Use only fresh batteries of the required size
and recommended type.
• Do not mix old and new batteries, different
types of batteries (standard, alkaline, or
rechargeable), or rechargeable batteries of
different capacities.
1. While holding down the button on the
bottom of the attached mounting
bracket, lift up the bracket to remove it.
• If you do not plan to use the Caller ID box for
a month or more, remove the batteries.
Batteries can leak chemicals that can
destroy electronic parts.
Connecting to a Single-Line
2. Use a flat-blade screwdriver to lift the
tab on the battery compartment door on
the bottom of the Caller ID box.
Phone
1. Disconnect the telephone line cord from
the modular phone jack on the wall and
plug it into the PHONE JACK on the
back of the Caller ID box.
• When replacing batteries, do not press any
buttons on the Caller ID box after you
remove the old batteries. Doing so could
erase all stored information.
3. Place four fresh AA batteries (not
supplied) into the compartment as
indicated by the polarity symbols
(+ and –) marked inside.
• When replacing the batteries, have fresh
ones on hand before you begin. If you do not
install the new batteries within about 2
minutes after removing the old ones, you will
lose all the information stored in the
Caller ID box.
2. Plug the Caller ID box’s pre-wired
telephone line cord into the modular
phone jack on the wall.
4. Replace the battery cover and snap it
closed.
When
appears or the display dims,
replace the batteries.
IMPORTANT
© 2002 RadioShack Corporation.
All Rights Reserved.
RadioShack and RadioShack.com are trademarks used by
RadioShack Corporation.
!
!
If an icon appears at the end of a paragraph, go to the box on that page with
the corresponding icon for pertinent information.
— Important
Ô — Note
!
Download from Www.Somanuals.com. All Manuals Search And Download.
• If the name and number are not available,
– UNAVAILABLE – appears with the call time
and date.
RECEIVING CALL WAITING
CALLER ID
Ô NOTE Ô
Call Back From Caller ID Memory
Your Caller ID box displays incoming call
waiting Caller ID information while you are
on another call. If you receive a call while
you are on another call, NEW appears, the
red new call light and CALL WAITING flash,
and the phone mutes while the Caller ID
information appears on the display.
• The handset for the phone connected to the
Caller ID box must be on the hook before
using this option.
REVIEWING CALLER ID RECORDS
Each Caller ID record includes the time and
date of the call, the call number (determined
by the order in which the calls are received),
the caller’s telephone number, and the
caller’s name (if available).
• When the caller’s phone number has a
different area code from the preset area
code, 1 and the caller’s three digit area code
are inserted automatically during memory
call back.
• When the caller’s phone number has the
same area code as the preset one, 1 and the
three digit area code are deleted
CALL BACK FROM
1. Press REVIEW ꢀ or ꢁ to review the
calls. Ô
CALLER ID MEMORY
automatically during the memory call back.
1. With the handset on the base, repeat-
edly press REVIEWꢀandꢁto find the
desired number. Ô
Once you have viewed all the new calls,
END OF NEW CALL appears.
Receiving Calls
• The red New Call LED flashes until all the
new calls have been reviewed.
After you view all the saved calls, END OF
LIST appears.
• The red New Call LED flashes quickly when
a VIP call is received.
2. Press CALL BACK twice. The Caller ID
box automatically redials the number
and PICK UP CALL appears.
• The number of new calls does not change
until all calls have been reviewed and END OF
NEW CALL appears.
2. Press REVIEW ꢀ or ꢁ to view them
again.
3. Lift the handset.
Reviewing Caller ID Records
• RPT appears if you received more than one
call from the same number.
USING THE VIP LIST
Select one of the four options below based
on your telephone company’s requirements
to make toll calls within your area code.
Your system lets you save up to 10 Caller ID
records in its VIP call list so they will not be
deleted when you delete all calls from the
system’s memory. This lets you save a list of
important callers.
• If you receive a call from a number
previously stored in memory, the old Caller
ID record’s data is replaced with the new
call’s time and date, and NEW appears.
Option1
1 + Area Code + 7-digit number (11 digits)
Deleting All Records
Follow these steps to store Caller ID records
in the VIP call list.
You must review all new calls before you can
erase all calls.
Option 2
Using the VIP List
1 + 7-digit number (8 digits)
1. Repeatedly press REVIEW ꢀ or ꢁ to
select a Caller ID record you want to
store as a VIP call.
• Every time you review a VIP call by pressing
either REVIEW key,VIP appears and NEW
VIP flashes quickly.
Option 3
Area Code + 7-digit number (10 digits)
• To delete a VIP Caller ID record, repeatedly
press either REVIEW key to find the desired
VIP call, then press VIP once. VIP
2. Press VIP. VIP appears and NEW VIP
flashes quickly. The Caller ID box stores
the Caller ID record as a VIP Caller ID
record. Ô
Option 4
7-digit number
disappears and NEW VIP stops flashing.
• To toggle a VIP call record to normal, press
VIP when you find the desired VIP call
record.
1. Repeatedly press REVIEWꢀandꢁ to
find the number to redial.
DELETING CALLER ID RECORDS
2. Press CALL BACK. The 7- or 11-digit
Deleting a Single Record
1. Press REVIEW ꢀ or ꢁ until you see
the record you want to delete.
number flashes.
3. Press REVIEWꢀandꢁ to select one of
the above four options.
2. Press DELETE twice to delete the
record. The remaining Caller ID records
are renumbered automatically.
4. Press CALL BACK again to confirm. The
selected number is dialed automatically
and PICK UP CALL appears. Ô
Deleting All Records
1. After reviewing all new messages,
press and hold DELETE for about 3
seconds. ERASE ALL CALLS? appears.
5. Pick up the handset.
RECEIVING CALLS
During an incoming call, NEW appears and
the red New Call light flashes while the
phone is ringing. The number of new and
total calls appear. The red light flashes
slowly, until all calls are reviewed. Ô
2. While ERASE ALL CALLS? appears, press
DELETE again. – NO CALLS – appears.
To cancel deletion, do not press any
buttons. After about 20 seconds, ERASE ALL
CALLS? disappears.
• If only the caller’s phone number is
received, the caller’s phone number with
the call time and date appear.
CARE
• If an incorrect, invalid or incomplete signal
is received, – LINE ERROR – appears.
Keep the Caller ID box dry; if it gets wet,
wipe it dry immediately. Use and store the
Caller ID box only in normal temperature
environments. Handle the Caller ID box
carefully; do not drop it. Keep the Caller ID
box away from dust and dirt, and wipe it with
a damp cloth occasionally to keep it looking
new.
• If the name and number are unlisted,
– PRIVATE CALL – appears with the call time
and date.
• For long distance calls, LONG DISTANCE
appears.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
If your Caller ID box is not performing as it
should, take it to your local RadioShack
store for assistance. To locate your nearest
RadioShack, use the store locator feature on
RadioShack's website
Shack (843-7422) and follow the menu
options. Modifying or tampering with the
Caller ID box's internal components can
cause a malfunction and might invalidate its
warranty and void your FCC authorization to
operate it.
current. These protection circuits meet or
exceed the FCC requirements. However,
lightning striking the Caller ID box or power
lines can damage your Caller ID box.
Limited One-Year Warranty
This product is warranted by RadioShack against
manufacturing defects in material and workmanship
under normal use for one (1) year from the date of
purchase from RadioShack company-owned stores
and authorized RadioShack franchisees and dealers.
EXCEPT AS PROVIDED HEREIN, RadioShack
MAKES NO EXPRESS WARRANTIES AND ANY IM-
PLIED WARRANTIES, INCLUDING THOSE OF
MERCHANTABILITY AND FITNESS FOR A PARTIC-
ULAR PURPOSE, ARE LIMITED IN DURATION TO
THE DURATION OF THE WRITTEN LIMITED WAR-
RANTIES CONTAINED HEREIN. EXCEPT AS PRO-
VIDED HEREIN, RadioShack SHALL HAVE NO
LIABILITY OR RESPONSIBILITY TO CUSTOMER
OR ANY OTHER PERSON OR ENTITY WITH RE-
SPECT TO ANY LIABILITY, LOSS OR DAMAGE
CAUSED DIRECTLY OR INDIRECTLY BY USE OR
PERFORMANCE OF THE PRODUCT OR ARISING
OUT OF ANY BREACH OF THIS WARRANTY, IN-
CLUDING, BUT NOT LIMITED TO, ANY DAMAGES
RESULTING FROM INCONVENIENCE, LOSS OF
TIME, DATA, PROPERTY, REVENUE, OR PROFIT
OR ANY INDIRECT, SPECIAL, INCIDENTAL, OR
CONSEQUENTIAL DAMAGES, EVEN IF RadioShack
HAS BEEN ADVISED OF THE POSSIBILITY OF
SUCH DAMAGES.
Lightning damage is not common.
Nevertheless, if you live in an area that has
severe electrical storms, we suggest that
you unplug your phone when storms
approach to reduce the possibility of damage.
FCC STATEMENT
Your Caller ID box complies with Part 68 of
FCC Rules and the requirements adopted
by the ACTA. On the bottom of this product
is a label with this product’s FCC Product
Identification number in the format
SPECIFICATIONS
Power Source ........... Regulated 6V DC, 200mA,
Positive (+) Tip AC Adapter
Use of any other power source may cause
damage.
US: DYFND01B433903. If requested, you
must provide this information to the
telephone company.
Some states do not allow limitations on how long an
implied warranty lasts or the exclusion or limitation of
incidental or consequential damages, so the above
limitations or exclusions may not apply to you.
You must not connect your Caller ID box to:
THE FCC WANTS YOU
TO KNOW
• coin-operated systems
• most electronic key telephone systems
In the event of a product defect during the warranty
period, take the product and the RadioShack sales re-
ceipt as proof of purchase date to any RadioShack
store. RadioShack will, at its option, unless otherwise
provided by law: (a) correct the defect by product re-
pair without charge for parts and labor; (b) replace the
product with one of the same or similar design; or (c)
refund the purchase price. All replaced parts and
products, and products on which a refund is made,
become the property of RadioShack. New or recondi-
tioned parts and products may be used in the perfor-
mance of warranty service. Repaired or replaced
parts and products are warranted for the remainder of
the original warranty period. You will be charged for
repair or replacement of the product made after the
expiration of the warranty period.
This warranty does not cover: (a) damage or failure
caused by or attributable to acts of God, abuse, acci-
dent, misuse, improper or abnormal usage, failure to
follow instructions, improper installation or mainte-
nance, alteration, lightning or other incidence of ex-
cess voltage or current; (b) any repairs other than
those provided by a RadioShack Authorized Service
Facility; (c) consumables such as fuses or batteries;
(d) cosmetic damage; (e) transportation, shipping or
insurance costs; or (f) costs of product removal, instal-
lation, set-up service adjustment or reinstallation.
This warranty gives you specific legal rights, and you
may also have other rights which vary from state to
state.
This equipment has been tested and found
to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide
reasonable protection against harmful
interference in a residential installation. This
equipment generates, uses, and can radiate
radio frequency energy and, if not installed
and used in accordance with the
Your Caller ID box is not intended to be
used with party-line systems. Connection to
party line service is subject to state tariffs.
Contact the state public utility commission,
public service commission, or corporation
commission for information.
We have designed your Caller ID box to
conform to federal regulations, and you can
connect it to most telephone lines. However,
each Caller ID box (and each device, such
as a telephone or answering machine) that
you connect to the telephone line draws
power from the telephone line. We refer to
this power draw as the device's ringer
equivalence number, or REN. The REN for
your Caller ID box is the digits represented
by ##, without a decimal point (03
instructions, may cause harmful interference
to radio communications.
However, there is no guarantee that
interference will not occur in a particular
installation. If this equipment does cause
harmful interference to radio or television
reception, which can be determined by
turning the equipment off and on, the user is
encouraged to try to correct the interference
by one or more of the following measures:
represents a REN of 0.3 for example) in the
Product Identification on the number found
on the bottom of your Caller ID box.
• Reorient or relocate the receiving
antenna.
RadioShack Customer Relations, 200 Taylor Street,
6th Floor, Fort Worth, TX 76102
If you use more than one phone or other
device on the line, add up all of the RENs. If
the total is more than five (three in rural
areas), your telephones might not ring. If
ringer operation is impaired, remove a
device from the line.
• Increase the separation between the
equipment and receiver.
12/99
• Connect the equipment into an outlet on
a circuit different from that to which the
receiver is connected.
• Consult your local RadioShack store or
an experienced radio/TV technician for
help.
In the unlikely event that your phone causes
problems on the phone line, the phone
company can temporarily discontinue your
service. If this happens, the phone company
attempts to notify you in advance. If advance
notice is not practical, the phone company
notifies you as soon as possible and advises
you of your right to file a complaint with the FCC.
• If you cannot eliminate the interference,
the FCC requires that you stop using
your Caller ID box.
Changes or modifications not expressly
approved by RadioShack may cause
interference and void the user’s authority to
operate the equipment.
Also, the phone company can make
changes to its lines, equipment, operations,
or procedures that could affect the operation
of this Caller ID box. The telephone company
notifies you of these changes in advance, so
you can take the necessary steps to prevent
interruption of your telephone service.
SURGE PROTECTION
Your Caller ID box has built-in protection
circuits to reduce the risk of damage from
surges in telephone line and power line
43-3903
LIB965YY
12A02
Printed in China
RadioShack Corporation
Fort Worth, Texas 76102
Download from Www.Somanuals.com. All Manuals Search And Download.
|