Radio Shack CD Player 3 DVD Changer User Guide

Complete 7-Piece 600-Watt Home

Theater Audio System

with 3-DVD Changer

Download from Www.Somanuals.com. All Manuals Search And Download.

mended by the manufacturer or sold with the product. Follow the

manufacturer's instructions for mounting, and use a recom-

mended mounting accessory.

MAKING CABLE CONNECTIONS

Be careful not to bend cables over the top of the receiver.

• Carts — Move the product on a cart carefully. Quick stops,

excessive force, and uneven surfaces may cause the product/

cart to overturn.

If cables are placed on top of the receiver, the magnetic field prod-

cued by the receiver’s transformers can cause the speakers to pro-

duce a humming noise.

6. Disc Tray — Keep your fingers well clear of the disc tray as it is

closing. It may cause serious personal injury.

USING DISCS

When using discs, you must always take the following precautions:

• Do not touch the playback side of the disc.

• Do not attach paper or tape to discs.

7. Burden — Do not place a heavy object on or step on the product.

The object may fall, causing serious personal injury and serious

damage to the product.

8. Connecting — When you connect the product to other equip-

ment, turn off the power and unplug all the equipment from the

wall outlet. Failure to do so may cause an electric shock and

serious personal injury. Read the owner’s manual of the other

equipment carefully and follow the instructions when making any

connections.

• Do not store discs in a place subject to direct sunlight or near

heat sources.

• Do not store discs in places subject to moisture and dust such as

a bathroom or near a humidifier.

• Store discs vertically in a case. Stacking or placing objects on

discs outside of their case may cause warping.

9. Sound Volume — Reduce the volume to the minimum level

before you turn on the product. Otherwise, sudden high volume

sound may cause hearing or speaker damage.

Cleaning Discs

10. Sound Distortion — Do not allow the product to output distorted

sound for a longtime. It may cause speaker overheating and fire.

Fingerprints and dust on the disc cause picture and sound deteriora-

tion. Wipe the disc from the center outward with a soft cloth. Always

keep the disc clean.

11. Headphones — When you use the headphones, keep the

volume at a moderate level. If you use the headphones continu-

ously with high volume sound, it may cause hearing damage.

If you cannot wipe off the dust with a soft cloth, wipe the disc lightly

with a slightly moistened soft cloth and finish with a dry cloth.

12. Laser Beam — Do not look into the opening of the disc tray or

ventilation opening of the product to see the source of the laser

beam. It may cause sight damage.

Do not use any type of solvents such as thinner, benzene, commer-

cially available cleaners or anti-static spray for vinyl LPs. They might

damage the disc.

13. Disc — Do not use a cracked, deformed, or repaired disc. These

discs are easily broken and may cause serious personal injury

and product malfunction.

IMPORTANT SAFETY INSTRUCTIONS

Careful attention is devoted to quality standards in the manufacture of

your system, and safety is a major factor in its design. However, safe-

ty is also your responsibility.

14. Ventilation — Slots and openings in the cabinet provide ventila-

tion, ensure reliable operation, and protect from overheating. Do

not block or cover these openings, and do not place the product

on a bed, sofa, rug, or other similar surface. Do not place the

product in a built-in installation such as a bookcase or rack

unless it provides proper ventilation as specified by the manufac-

turer.

This section lists important information that will help you properly use

and enjoy your system. Read all the included safety and operating in-

structions before using your system. Follow them closely, and retain

them for future reference.

15. Power Sources — Operate this product using only the power

source indicated on its marking label. If you are not sure of your

home's power type, consult your product dealer or local power

company.

1. Heed Warnings — Follow all warnings on the product and in the

operating instructions.

2. Cleaning — Unplug this product from the wall outlet before

cleaning. Use only a damp cloth for cleaning. Do not use liquid or

aerosol cleaners.

16. Polarization — This product is equipped with a polarized AC line

plug (a plug having one blade wider than the other). This plug will

fit in the power outlet only one way. This is a safety feature. If

you cannot insert the plug fully into the outlet, try reversing the

plug. If the plug still doesn't fit, contact your electrician to replace

your obsolete outlet. Do not defeat the safety purpose of the

polarized plug. If you need an extension, use a polarized cord.

3. Attachments — Do not use attachments/accessories not recom-

mended by the product manufacturer, as they might create a

hazard.

4. Water and Moisture — Do not use this product near water (for

example, near a bathtub, washbowl, kitchen sink, or laundry tub;

in a wet basement; or near a swimming pool).

17. Power-Cord Protection — Route power-supply cords so they are

not likely to be walked on or pinched by items placed on or

against them, paying particular attention to cords at plugs, con-

venience receptacles, and the point where they exit from the

product.

5. Accessories — Do not place this product on an unstable cart,

stand, tripod, bracket, or table. The product may fall, causing

serious injury to a child or adult, and serious damage to the prod-

uct. Use only with a cart, stand, tripod, bracket, or table recom-

Read this First

Download from Www.Somanuals.com. All Manuals Search And Download.

18. Lightning — For added protection for this product during a light-

ning storm, or when it is left unattended and unused for long peri-

ods of time, unplug it from the wall outlet and disconnect the

antenna or cable system. This will prevent damage to the prod-

uct due to lightning and power-line surges.

unit, size of grounding conductors, location of antenna-discharge

unit, connection to grounding electrodes, and requirements for

the grounding electrode.

Note to CATV System Installer

19. Overloading — Do not overload wall outlets, extension cords, or

integral convenience receptacles, as this can result in a risk of

fire or electric shock.

This reminder is provided to call the CATV system installer’s attention

to Section 820-40 of the NEC which provides guidelines for proper

grounding and, in particular, specifies that the cable ground shall be

connected to the grounding system of the building, as close to the

point of cable entry as practical.

20. Objects and Liquids — Never push objects of any kind into this

product through openings, as they may touch dangerous voltage

points or short out parts that could result in a fire or electric

shock. Never spill liquid of any kind on the product.

Power Lines — An outside antenna system should not be located in

the vicinity of overhead power lines or other electric light or power cir-

cuits, or where it can fall into such power lines or circuits. When in-

stalling an outside antenna system, extreme care should be taken to

keep from touching such power lines or circuits as contact with them

might be fatal.

21. Servicing — Do not attempt to service this product yourself, as

opening or removing covers may expose you to dangerous volt-

age or other hazards. Refer all servicing to qualified service per-

sonnel.

22. Damage Requiring Service — Unplug this product from the wall

outlet and refer servicing to qualified service personnel under the

following conditions:

• When the power-supply cord or plug is damaged.

• If liquid has been spilled or objects have fallen into the prod-

uct.

• If the product has been exposed to rain or water.

• If the product does not operate normally by following the oper-

ating instructions. Adjust only those controls that are covered

by the operating instructions, as an improper adjustment of

other controls may result in damage and will often require

extensive work by a qualified technician to restore the product

to normal operation.

• If the product has been dropped or damaged in any way.

• When the product exhibits a distinct change in performance.

23. Replacement Parts — When replacement parts are required, be

sure the service technician uses replacement parts specified by

the manufacturer or having the same characteristics as the origi-

nal part. Unauthorized substitutions may result in fire, electric

shock, or other hazards.

24. Safety Check — Upon completion of service or repairs to this

product, ask the service technician to perform safety checks to

determine that the product is in proper operating condition.

25. Wall or Ceiling Mount — The product should be mounted to a

wall or ceiling only as recommended by the manufacturer.

26. Heat — The product should be situated away from heat sources

such as radiators, heat registers, stoves, or other products

(including amplifiers) that produce heat.

27. Non-use Periods — Unplug the system’s power cord when you

will not use it for extended periods.

28. Outdoor Antenna Grounding — If an outside antenna or cable

system is connected to the product, be sure the antenna or cable

system is grounded so as to provide some protection against

voltage surges and built-up static charges. Article 810 of the

National Electrical Code, ANSI/NFPA 70, provides information

with regard to proper grounding of the mast and supporting

structure, grounding of the lead-in wire to an antenna discharge

Read this First

Download from Www.Somanuals.com. All Manuals Search And Download.

ˆ Contents

Features .......................................................................................... 6

Stopping Play ........................................................................ 17

Pausing Play ......................................................................... 17

Advancing by Frames ........................................................... 17

Playing in Slow-Motion .......................................................... 17

Skipping Chapters ................................................................. 18

Scanning ............................................................................... 18

Advanced Features ................................................................... 18

Using GUI Menu Icons .......................................................... 18

Using a Title Menu ................................................................ 18

Using a DVD Menu ............................................................... 18

Changing Subtitle Language ................................................. 19

Changing Soundtrack Language .......................................... 19

Viewing from Another Angle ................................................. 19

Using Repeat Play ................................................................ 19

Zooming In ............................................................................ 19

Setting rating level and password ............................................. 19

Selecting a Rating Level ....................................................... 19

Setting a Password ............................................................... 20

Clearing Your Password ........................................................ 20

Selecting TV Aspect .................................................................. 20

Selecting Digital Audio Out ........................................................ 20

Preparation ..................................................................................... 7

Connecting Components ............................................................. 7

Connecting a TV ..................................................................... 7

Connecting a Cassette Deck .................................................. 7

Connecting a VCR .................................................................. 7

Connecting a Satellite Receiver or Cable Box ........................ 7

Connecting a Digital Optical Audio Devices ............................ 7

Connecting an Auxiliary Audio Device .................................... 7

Connecting a Second Sub Woofer .......................................... 7

Connecting Antennas .................................................................. 7

FM Indoor Antenna ................................................................. 7

FM Outdoor Antenna .............................................................. 7

AM Indoor Loop Antenna ........................................................ 7

AM Outdoor Antenna .............................................................. 8

Connecting the Speakers ............................................................ 8

Placing the Speakers .................................................................. 8

Installing Batteries in the Remote Control ................................... 8

Receiver Operation ........................................................................ 9

A Quick Look at the Receiver’s Controls ..................................... 9

Using the Tuner ......................................................................... 10

Listening To FM Stereo Broadcasts ...................................... 10

Presetting Radio Stations ..................................................... 10

Manual Preset ....................................................................... 10

Auto Preset ........................................................................... 10

Listening to Preset Stations .................................................. 10

Switching Between Preset Stations and Manual Tuning ....... 10

Using the CD Player .................................................................. 10

Continuous Play .................................................................... 11

Changing the Sound Mode ................................................... 11

Using Night Mode ...................................................................... 11

Using the Sleep TImer ............................................................... 11

Using the Dimmer ...................................................................... 11

Troubleshooting .......................................................................... 21

Care ........................................................................................... 22

Manuracturer’s Codes ................................................................. 23

TV Codes .............................................................................. 23

VCR Codes ........................................................................... 24

Cable Codes ......................................................................... 25

SAT Codes ............................................................................ 26

Specifications .............................................................................. 27

Amplifier Section ................................................................... 27

Tuner Section ........................................................................ 27

Video Section ........................................................................ 27

Speaker Section .................................................................... 28

Miscellaneous ....................................................................... 28

Remote Control Operation .......................................................... 12

A Quick Look at the Remote Control ......................................... 12

Operating Range of the Remote Control ................................... 12

Setting up the Surround Sound System .................................... 13

Changing the Speaker Size .................................................. 13

Changing the Channel Level ................................................. 13

Changing the Speaker Distance ........................................... 13

Surround Effects ................................................................... 14

Changing System Settings - Special Circumstances ............ 14

Using the Remote Control Unit to Control Additional

Components .............................................................................. 14

Controlling the Tuner ................................................................. 14

Listening To FM Stereo Broadcasts ...................................... 14

Presetting Radio Stations ..................................................... 14

Manual Preset ....................................................................... 14

Auto Preset ........................................................................... 15

Listening to Preset Stations .................................................. 15

Switching Between Preset Stations and Manual Tuning ....... 15

Controlling the CD Player .......................................................... 15

Changing the Sound Mode ................................................... 15

Using GUI Menu Icons .......................................................... 15

Repeat Play .......................................................................... 15

Programming Tracks ............................................................. 16

Modifying the Program and Adding a Track .......................... 16

Random Play ........................................................................ 16

Controlling the Sleep TImer ....................................................... 16

DVD Player Operation ................................................................. 17

Basic Playback .......................................................................... 17

Contents

Download from Www.Somanuals.com. All Manuals Search And Download.

ˆ Features

Your Complete 7-Piece 600-Watt Home Theater Audio System is a

great system that incorporates some of the best features in home the-

ater technology. The Home Theater Audio System comes complete

with a shielded center-channel speaker, a band pass-type subwoofer,

two shielded front-channel speakers, two rear surround speakers, a

remote control, and a receiver equipped with a tuner and a 3-disc

DVD player.

Its other features include:

Dolby Digital, Dolby ProLogic, and DTS Sound Settings

— let you

use the Home Theater Audio System for a movie-theater surround

sound experience

Adjustable Speaker Size, Channel Level, and Distance

— lets you

customize your setup for a true surround sound experience

Additional Component Connections

— let you connect other audio

and audio/visual components to the receiver so that you can use the

system’s surround sound speakers

Night Mode

— lets you compress the dynamic range, reducing the

difference in loudness between different sounds

Parental Lock (Rating Level)

— lets you set a ratings level so that

your children cannot watch a DVD that has a rating higher than you

set

Sleep Timer

— lets you program the receiver to turn off after a set

time period

Features

Download from Www.Somanuals.com. All Manuals Search And Download.

ˆ Preparation

You can also connect a satellite receiver, MD or DAT recorder, CD

CONNECTING COMPONENTS

SAT IN

player, or anything else with digital output to the receiver’s

op-

You must connect a TV to the receiver in order to use the receiver’s

DVD player. You can connect other audio and audio/visual compo-

nents to the receiver in order to use the Home Theater Audio Sys-

tem’s surround sound capabilities.

tical jack. Use Toslink optical cable to connect the desired device to

the receiver.

Connecting an Auxiliary Audio Device

You can also connect an audio device that does not require Toslink

(such as an MP3 player, playback cassette deck, or portable CD

player) to the Home Theater Audio System. Use audio cords to con-

Connecting a TV

Use audio/video cords (not supplied) to connect a TV to the receiver.

Connect red plugs to the red

AUDIO

jacks and white plugs to the

AUX

nect the desired device to the receiver’s

jacks. Connect red

AUDIO

white

jacks.

AUDIO

plugs to the red

jacks.

jacks and white plugs to the white

If your TV has an S-Video jack, use an S-Video cable to connect your

S-VIDEO OUT

TV to the receiver’s

. If your TV does not have an S-Vid-

Connecting a Second Sub Woofer

eo jack, use audio/video cord to connect your TV to the receiver’s

MONITOR OUT

You can connect a second or larger powered subwoofer to the sys-

SUB WOOFER PRE-OUT

tem. Connect the sub woofer to the receiver’s

Connecting a Cassette Deck

jack using shielded audio cable (not supplied).

Use audio/video cords (not supplied) to connect a cassette deck to

CONNECTING ANTENNAS

AUDIO

the receiver. Connect red plugs to the red

jacks and white

AUDIO

plugs to the white

jacks. Make sure you connect the VCR to

When connecting equipment, always make sure the power is

switched off and the power cord is disconnected from the wall outlet.

TAPE IN

TAPE OUT

sets of jacks.

both the

and

Note:

If the cassette deck is placed too close to the receiver, noise

FM Indoor Antenna

might occur during cassette playback. If this happens, move the cas-

sette deck farther away from the receiver.

In an area with strong FM signals, the T-type FM antenna (supplied)

is sufficient.

Connecting a VCR

1. Use a flat or Phillips screwdriver to loosen the screws on the

supplied transformer.

Use audio/video cords (not supplied) to connect a VCR to the receiv-

AUDIO

er. Connect red plugs to the red

jacks and white plugs to the

AUDIO

white

jacks.

2. Place the metal connectors on the end of theT-type antenna’s

base on the transformer’s metal contacts (underneath the screw

heads) then tighten the screws.

VIDEO

Connect yellow plugs to the yellow

jacks.

OUT

Make sure you connect the VCR to both the and sets of

Note:

jacks.

ANTENNA FM 75

3. Plug the transformer into

Ω.

4. Extend the T-antenna’s other two wires and attach them to a wall

or window frame for the best possible reception.

Connecting a Satellite Receiver or Cable Box

If you have a cable FM antenna, use a coaxial cable to connect it to

Use audio/video cords (not supplied) to connect a satellite receiver or

ANTENNA FM 75

Ω.

AUDIO

cable box to the receiver. Connect red plugs to the red

jacks

AUDIO

and white plugs to the white

jacks.

FM Outdoor Antenna

Note:

Your cable box or satellite receiver must use audio/video cords

or Toslink optical cable to connect to the receiver. If your equipment

only uses coaxial cable, you cannot connect it to the receiver.

In an area where FM signals are weak, you must use a 75-ohm un-

balanced-type outdoor FM antenna (not supplied). Generally, a 3-ele-

ment antenna will be sufficient. If you live in an area where the FM

signals are particularly weak, it may be necessary to use one with 5

or more elements.

If your satellite receiver or cable box has digital output, use an optical

cable to connect the satellite receiver to the home theater receiver’s

SAT IN

optical jack. If your satellite receiver or cable box does not

have digital output, use analog cable to connect it to the home theater

Connect the antenna’s coaxial cable to the supplied transformer.

SAT IN

receiver’s

video jack.

ANTENNA FM 75

Plug the transformer into

Ω.

Connecting a Digital Optical Audio Devices

AM Indoor Loop Antenna

You can connect a digital audio device such as an DAT (Digital Au-

The supplied high-performance AM loop antenna is sufficient for

good reception in most areas.

DIGITAL OUT

dioTape) or MD (Mini Disc) recorder to the receiver’s

record audio from the receiver. Use Toslink optical cable to connect

DIGITAL OUT

the DAT or MD recorder to the receiver’s

optical jack.

Preparation

Download from Www.Somanuals.com. All Manuals Search And Download.

GND

. Place the antenna

Connect the loop antenna’s wires to

and

resulting from the speaker falling from the TV in the event of

external shocks (for example, earthquakes).

in a location (for example, on a shelf or window frame) that gives the

best reception.

3. If possible, install the surround speakers slightly above ear level.

Keep the antenna as far away as possible from the entire system,

speaker cords and the power cord to prevent unwanted noise.

Note:

Try not to install the surround speakers farther away from

the listening position than the front and center speakers. Doing

so can weaken the surround effect.

AM Outdoor Antenna

To achieve the best possible surround sound, install your speakers

as shown below. Be sure all speakers are installed securely to pre-

vent accidents and improve sound quality.

If the supplied AM loop antenna does not deliver sufficient reception,

use an outdoor AM antenna (not supplied).

Note:

Even when using an outdoor AM antenna, do not disconnect

Overhead view of speaker set up

the AM indoor loop antenna.

(Illus of speaker set up, please use the illus of 31-5011 if necessary)

Use an insulated wire more than 15 ft (5 m) long. Strip one end, and

connect that end to

INSTALLING BATTERIES IN THE REMOTE

CONTROL

The antenna wire should be strung outdoors or indoors near a win-

GND

dow. For better reception, connect the

ground.

terminal to a reliable

Your remote control requires two AAA batteries (not supplied) for

power. For the best performance and longest life, we recommend

RadioShack alkaline batteries.

CONNECTING THE SPEAKERS

Cautions:

When connecting equipment, always make sure the power is

switched off and the power cord is disconnected from the wall outlet.

• Use only fresh batteries of the required size and recommended

type.

Note:

Use speakers with a normal impedance of 6 Ohms.

• Do not mix old and new batteries or different types of batteries.

Follow these steps to install batteries.

Follow these steps to connect the speakers.

1. Remove the plastic end pieces from the wires.

2. Twist the exposed ends of the bare wire strands.

1. Slide the battery compartment cover in the direction of the arrow

to remove it.

3. Press up (or down) the speaker’s terminal and insert the appro-

priate wire ends. The color of the speaker wire’s plastic coating is

the same as the color of the matching terminal.

2. Place the batteries in the compartment as indicated by the polar-

ity symbols (+ and –) marked inside.

3. Replace the cover.

Note:

Be sure to connect each speaker to the appropriate

speaker terminal, connecting positive to positive (+ to +) and

negative to negative (– to –).

When the remote control stops operating properly, replace the batter-

ies.

SPEAKERS

4. Connect the front speaker’s wire to the receiver’s

Warning:

or bury them.

Dispose of old batteries promptly and properly. Do not burn

FRONT L

and terminals (Red/Black).

Connect the rear speaker’s wire to the receiver’s

Caution:

If you do not plan to use the remote control for a month or

REAR L

and terminals (Gray/Black).

longer, remove the batteries. Batteries can leak chemicals that can

destroy electronic parts.

Connect the center speaker’s wire to the receiver’s

CENTER

terminal (Blue/Black).

Connect the subwoofer’s wire to the receiver’s

WOOFER

terminal (Brown/Black).

5. Release the speaker terminal.

6. Plug the AC power cord into an AC wall socket.

PLACING THE SPEAKERS

1. Place the front left and right speakers at equal distances from

the TV.

2. Install the center speaker above or below the TV so that the

sound of the center channel is localized at the TV screen.

Caution:

If you choose to install the center speaker on top of the

TV, be sure to secure it, to reduce the risk of damage or injury

Preparation

Download from Www.Somanuals.com. All Manuals Search And Download.

ˆ Receiver Operation

A QUICK LOOK AT THE RECEIVER’S CONTROLS

DISC SKIP/TUNING MODE – Press to skip discs in DVD/CD

mode.

FUNCTION – Rotate to select the desired audio

or audio/video source. The selected source name

appears on the display panel.

In tuner mode, press to switch between presets and manual tuning

(see “Switching Between Preset Stations and Manual Tuning” on

Page 10).

TUNING/PRESET – Repeatedly

BAND/PLAY – Press to select AM or FM

press to tune to AM or FM stations

and select preset stations in tuner

mode.

band in tuner mode.

Press to plays back the disc in DVD/CD mode.

DISC 1, 2, 3 – Press to open or

close the disc trays.

Note: You cannot use these but-

tons in tuner mode.

NIGHT MODE – When

the sound source is Dol-

by Digital or stereo

mode, press to com-

press large dynamic

range (see XXXX on

page XX)..

Display Panel

PHONES – This

jack is compatible

with wide range of

conventional dy-

namic headphone

types.

When you connect

headphones, the

unit automatically

selects stereo

mode.

MEMORY/

PAUSE –

stores a station

in memory in

tuner mode;

pauses the disc

in DVD/CD

mode.

FM MODE/STOP – In tuner

mode, press to select stereo

or monaural mode for FM in

tuner mode.

SURROUND MODE –

Pressto switchsurround

modes between PRO

LOGIC,THEATER,HALL,

and STADIUM for analog

equipment (not for SAT-

OPT function).

In DVD/CD mode, press to

stop the disc.

SLEEP – Repeatedly press

to set the sleep timer.

DTS – Press to switch

to 5.1 Channel DTS

from stereo mode.

DIMMER – Press

once to dim the

display panel.

Press one more to

return to normal

status.

STEREO – Press to switch

from surround mode to ste-

reo mode.

In Dolby Digital mode, press

to change the mode to ste-

reo.

appears.

DOLBY DIGITAL – Press to

switch to 5.1 Channel Dolby

Digital from stereo mode.

Receiver Operation

Download from Www.Somanuals.com. All Manuals Search And Download.

Auto Preset

USING THE TUNER

POWER

BAND

to select the desired band.

1. Press

2. Rotate

3. Press

. The receiver defaults to the last selected function.

1. Press

FUNCTION

MEMORY

for about 3 seconds.

to the tuner function.

2. Hold down

BAND

to select the desired band.

3. The tuner automatically begins scanning, and stores the first 30

strong signals it receives.

^{TUNING/PRESET})ý# ^or,ý- ^{to tune in the}

4. Repeatedly press

desired station. When you reach a station, Jkd[Z appears above

the station number.

4. Scanning stops automatically after radio stations have been

stored in the auto preset memory.

To change the frequency by one step, press TUNING/PRESET

Note: Press MEMO again to stop auto scanning earlier.

)

^or,- ^{quickly (less than half a second).}

To store stations on the other band, repeat Steps 1–4, substituting

the other band in Step 1.

To tune to the next clear frequency, hold down TUNING/PRESET

)ý# ^or,-^{, then release the button. The system automati-}

cally tunes to the next strong station.

Listening to Preset Stations

TUN-

To listen to a radio station stored in the station memory, press

Listening To FM Stereo Broadcasts

ING MODE

TUNING/PRESET

then

)ý# ^or,-^.

FM MODE

In FM mode, press

to select stereo or mono. When you se-

lect the stereo mode, IJ appears to the right of Jkd[Z. It goes off

when you select mono.

Switching Between Preset Stations and Manual

Tuning

When you listen to very weak FM stereo stations, you might hear

higher-than-normal background hiss. Switch to mono to eliminate the

hiss.

TUNING/PRESET

If you store preset stations, pressing

)ý# ^or,-

scrolls through the preset stations, rather than changing the frequen-

cy station by station.

To switch to scrolling by individual stations, press

TUNING MODE

Presetting Radio Stations

TUNING/PRESET

then repeatedly press

quickly to

)ý# ,-

You can preset 30 AM and 30 FM stations regardless of the recep-

tion. Tune in the desired stations using auto or manual tuning.

TUNING/PRESET

change the frequency by one step. Or hold down

)

^or,- ^{to tune to the next clear station.}

To switch back to scrolling through the preset stations, press TUNING

MODE TUNING/PRESET

Manual Preset

, then repeatedly press

you reach the desired station.

until

)ý# ^or,-

BAND

1. Press

to select the desired band.

TUNING/PRESET

)ý# ^or,- ^{to tune in the}

2. Repeatedly press

desired station.

USING THE CD PLAYER

You can use the receiver’s 3-DVD changer to listen to audio CDs.

To change the frequency by one step, press TUNING/PRESET

)

^or,- ^{quickly (less than half a second).}

Important:

You can only use audio CDs and some CD-Rs with the

reciever. CD-ROM, CD-G, photo CD, and CD-i discs can not be

played on this player.

TUNING/PRE-

To tune to the next clear frequency, hold down

SET

)ý# ^or,-^{, then release the button. The system auto-}

matically tunes to the next strong station.

POWER

1. Press

2. Rotate

3. Press

MEMORY

3. Press

. C;CE flashes for 5 seconds. When C;CE goes

FUNCTION

until :L:%9: appears.

off, press the button again (C;CE flashes again).

DISC 1 DISC 2

DISC 3

to open the desired drawer.

, or

TUNING/PRESET

)ý# ^or,-^.

4. Select the preset number with

4. Place the desired CDs in the tray, then press the appropriate

DISC button again to close the drawer.

MEMORY

5. Press

again.

6. Repeat Steps 1–5 to memorize other stations (up to 30 stations

for each band). If you store a new station on a memory number

in which a station is stored, the old station is cleared.

Note:

If you want to load more than one CD, you can press

another DISC button. The receiver closes the open drawer and

opens the drawer of the DISC button you pressed.

To store stations on the other band, repeat Steps 1–6, substituting

the other band in Step 1.

DISC SKIP

5. To select a CD, repeatedly press

CD’s number blinks.

until the desired

Note:

pressing

If you want to store more stations later, you might find that

PLAY

6. Press

. The disc icon (at the far left) begins to rotate.

TUNING/PRESET

)ý# ^or,- ^{only moves the tuner to the}

To pause playback, press

PAUSE

. The disc icon flashes rapidly.

next preset station (instead of moving the frequency one step). If this

TUNING MODE

PAUSE

PLAY

again or press

happens, press

to return to manual tuning (see

To resume playback, press

“Switching Between Preset Stations and Manual Tuning”).

Receiver Operation

Download from Www.Somanuals.com. All Manuals Search And Download.

To move forward through a track, hold down TUNING/PRESET

,- ^{for about 2 seconds. Repeat up to two times to increase}

PLAY

the fast-forward speed. To resume playback, press

Note:

At the beginning or end of a track on an audio CD, the

scan speed returns to normal.

To move backward through a track, hold down TUNING/PRESET

)ý# ^{for about 2 seconds. Repeat up to two times to increase}

PLAY

the rewind speed. To resume playback, press

To skip to the next track on the CD, press TUNING/PRESET

once.

To return to the beginning of the current track, press TUNING/

PRESET

)ý#^.

To return to the previous track, press TUNING/PRESET

twice.

)ý#

To stop playback, press STOP. The disc icon stops rotating, and

PLAY

H;IKC; appears. To resume playback, press

. To stop play-

STOP

back completely, press

again.

Continuous Play

When the receiver finishes playing an audio CD, it automatically

plays the disc on the next tray.

Changing the Sound Mode

You can listen to your CDs using Stereo or Surround modes.

For stereo only, press STEREO once.

For a surround mode, repeatedly press SURROUND MODE until the

desired mode (J>;7J;H, >7BB, IJ7:?KC, or FHEýBE=?9) appears.

Note:

Dolby Digital and DTS modes do not work with CDs.

USING NIGHT MODE

You can use Night Mode to compress large dynamic ranges, result-

ing in “quieter” explosions and other loud sounds in movies. The

Night Mode feature adjusts the dynamic range so that there is less

disparity in the noise level of all sounds in a movie (explosions, mu-

sic, dialogue, and so on).

NIGHT MODE

While in Dolby Digital or Stereo mode, press

to turn

NIGHT MODE

Night Mode on. Press

again to turn it off.

Note:

Night Mode is not available for movies using DTS mode.

USING THE SLEEP TIMER

You can set the sleep timer to turn off the receiver after a set period

of time.

SLEEP

Repeatedly press

to set the sleep timer to the desired time ('&,

(&, )&, *&, +&, ,&, -&, .&, or /& minutes). The receiver turns off when

the selected time has expired.

USING THE DIMMER

DIMMER

Press

to make the display dimmer. Press again to return the

display to its original brightness.

Receiver Operation

Download from Www.Somanuals.com. All Manuals Search And Download.

ˆ Remote Control Operation

A QUICK LOOK AT THE REMOTE CONTROL

SURROUND – When you select an analog

source (TUNER, AUX, TAPE, TV, VCR, or

SAT), as you press SURROUND, the sur-

round mode changes.

TEST TONE – Turns on or off the test tone function in

DTS, DOLBY DIGITAL, or PRO LOGIC mode. The test

tone is output from Front L speaker, Center speaker,

Front R speaker, Surround R speaker, Surround L

speaker, (Subwoofer speaker: when Subwoofer on).

MUTE – Press to immediately decrease the sound lev-

el.

appears on the display panel. To restore the

CKJ;

TONE – Lets you adjust the low frequency

level (BASS) with (left arrow icon) or (right ar-

row icon) and also you can adjust high fre-

quency level (TREBLE) with (left arrow icon)

or (right arrow icon) according to your taste

and room acoustics.

sound, press again.

SLEEP – Press to set the sleep time. The

sleep time changes to

, ...

'& (& )& /&

(minutes), and

(former display).

E<<

PRESET – / + –- During AM or FM reception, you can

scan through other frequencies or select the preset

numbers.

BAND – selects AM or FM band while listening to the

tuner function.

TUNING MODE – selects and deselects preset mode.

FM MODE (FM MONO/STEREO) – selects FM

mono or stereo mode.

MEMORY – Press to memorize the desired station

frequency.

• Direct sunlight or fluorescent light is shining onto the remote sen-

sor.

OPERATING RANGE OF THE REMOTE

CONTROL

• The receiver is located near a device that is emitting infrared

rays.

The remote control may not work properly if:

• There are obstacles between the remote control and the

receiver’s remote sensor.

• The receiver is operated simultaneously with another infrared

remote control.

Remote Control Operation

Download from Www.Somanuals.com. All Manuals Search And Download.

5. Press 7

. 9

appears. To change the center speaker’s level,

SETTING UP THE SURROUND SOUND

SYSTEM

repeatedly press 8 or 9 until you reach the desired level (¶'&

to !'&ýZ8).

You can use your Home Theater Audio System as soon as you take it

out of the packaging. If you wish to fine-tune the system (for example,

substitute different speakers or alter the sound distribution), follow the

directions below.

ENTER

6. Press

. <HýB;L;B appears.

7. Press 7. <Hý&Z8ýappears. To change the front right speaker’s

level, repeatedly press 8 or 9 until you reach the desired level

(¶'& to !'&ýZ8).

Changing the Speaker Size

ENTER

8. Press

. IHýB;L;B appears.

Note:

If you are using the speakers provided in your Home Theater

Audio System, the speaker size defaults are correct. If you are using

other speakers, follow these steps.

9. Press 7. IHý&Z8ýappears. To change the rear right speaker’s

level, repeatedly press 8 or 9 until you reach the desired level

(¶'& to !'&ýZ8).

POWER

1. Press

2. Press

ENTER

10. Press

. IBýB;L;B appears.

SETUP

. IFýI?P; appears.

11. Press 7. IBý &Z8ý appears. To change the rear left speaker’s

level, repeatedly press 8 or 9 until you reach the desired level

(¶'& to !'&ýZ8).

3. Press 7. <HEDJ appears.

4. Press 7 again. <#IC7BB appears. To change to <#B7H=;, press

8 or 9.

ENTER

12. Press

. IMýB;L;B appears.

Note:

If the cone size (diameter) of the speaker is larger than 5

13. Press 7. IMý&Z8ýappears. To change the sub woofer’s level,

repeatedly press 8 or 9 until you reach the desired level (¶'&

to !'&ýZ8).

inches, change to <#B7H=;.

ENTER

5. Press

. 9;DJ;H appears.

ENTER

SETUP

14. Press

15. Press

. <BýB;L;B appears.

6. Press 7. 9#IC7BB appears. To change to 9#B7H=;, press 8 or

9. To change to 9#DED;, press 8 or 9again.

to exit.

Note:

If the cone size (diameter) of the speaker is larger than 5

Changing the Speaker Distance

inches, set the item to 9#B7H=;.

When you have your home theater arrangement the way you want it

(speakers, receiver, and any components), you can change the

speaker distance entered in the receiver’s memory. The default set-

tings are 10 ft.

ENTER

7. Press

. IKHH appears.

8. Press 7. I#IC7BB appears. To change to I#ýB7H=;, press 8 or

9. To change to I#DED;, press 8 or 9again.

1. Imagine there is a straight line running from the front left speaker

to the front right speaker.

Note:

If the cone size (diameter) of the speaker is larger than 5

inches, set the item to I#B7H=;.

2. Measure the distance in a perpendicular line from your listening

position (for example, your couch) to the imaginary line.

ENTER

9. Press

. IK8#M< appears.

10. Press 7. IM#O;I appears. If you aren’t using a subwoofer,

Note:

Do not meaure the distance to the speakers, just the line.

change to IM#DE by pressing 8 or 9.

3. Repeat Steps 1–2 for the rear (surround) speakers.

ENTER

SETUP

again to exit.

11. Press

. <HEDJ appears. Press

4. Measure the distance in a perpendicular line from your listening

position (for example, your couch) to the center speaker.

Changing the Channel Level

The default channel level settings are 0 dB for each speaker. You can

change the speakers’ sound distribution to suit your surround sound

needs. For example, if you are closer to the left front speaker than the

right front speaker, the left front speaker might seem “louder” than the

right one. To adjust it, you must change the channel level for one or

both speakers until the sound evens out.

SETUP

5. Press

, then press 8 twice. IFý:?IJ appears.

6. Press 7. <HEDJ appears.

7. Press 7again. <ý'&<J appears. To change the distance between

the listening position and the front speakers, repeatedly press

8 or 9 until you reach the desired level (&ýto )&ý<J).

Follow these steps to change the channel level.

ENTER

8. Press

. 9;DJ;H appears.

SETUP

1. Press

, then 8. 9>ýB;L;B appears.

9. Press 7. 9ý'&<J appears. To change the distance between the

listening position and the center speaker, repeatedly press 8 or

9 until you reach the desired level (&ýto )&ý<J).

2. Press 7. <BýB;L;Býappears.

3. Press 7 again. <ý &Z8 appears. To change the front left

speaker’s level, repeatedly press 8 or 9 until you reach the

desired level (¶'& to !'&ýZ8).

ENTER

10. Press

. IKHH$ appears.

ENTER

4. Press

. 9ýB;L;B appears.

Remote Control Operation

Download from Www.Somanuals.com. All Manuals Search And Download.

11. Press 7

. I

appears. To change the distance between the

CONTROLLING THE TUNER

listening position and the rear (surround) speakers, repeatedly

POWER

1. Press

2. Press

3. Press

. The last selected function appears.

press 8 or 9 until you reach the desired level (&ýto )&ý<J).

TUNER

ENTER

12. Press

13. Press

. <HEDJ appears.

BAND

to select the desired band.

SETUP

to exit.

TUNING/PRESET

4. Repeatedly press

desired station.

to tune in the

)

Surround Effects

Important:

The center and rear speakers only operate when the unit

To change the frequency by one step, press TUNING/PRESET

)

is set to a surround sound mode and the source material being

played is recorded or broadcast in Dolby Digital, DTS or Dolby Pro

Logic surround sound.

quickly (less than half a second).

TUNING/PRE-

To tune to the next clear frequency, hold down

SET

) ^or-^{, then release the button. The system automatically}

Stereo broadcasts or recordings will produce some rear channel ef-

fects when played in a surround mode. However, mono sources will

not produce any sound from the rear speakers.

tunes to the next strong station.

Listening To FM Stereo Broadcasts

Changing System Settings - Special Circumstances

FM MODE

In FM mode, press

to select stereo or mono. When you se-

lect the stereo mode, IJ appears to the right of Jkd[Z. It goes off

when you select mono.

When you make a copy of DVD/CD via TAPE output, set the front

speaker size to <#B7H=;. Set the surround mode to IJ;H;E.

When you listen to very weak FM stereo stations, you might hear

higher-than-normal background hiss. Switch to mono to eliminate the

hiss.

USING THE REMOTE CONTROL UNIT TO

CONTROL ADDITIONAL COMPONENTS

You can set your remote control to control other components such as

a VCR, TV, satellite receiver or cable box.

Presetting Radio Stations

You can preset 30 AM and 30 FM stations regardless of the recep-

tion. Tune in the desired stations using auto or manual tuning.

1. Turn on the component to be programmed.

2. Look up the brand and corresponding code(s) in the code list

(see “Manuracturer’s Codes” on Page 23).

Manual Preset

BAND

1. Press

to select the desired band.

VCR TV

3. While holding down the appropriate source button (

, or

SAT

) on the remote control, use the number keys enter the first

TUNING/PRESET

2. Repeatedly press

desired station.

to tune in the

)

code from the code list.

POWER

4. Release the component button, then press

To change the frequency by one step, press TUNING/PRESET

)

quickly (less than half a second).

If you have entered the correct code, the component turns off.

To tune to the next clear frequency, hold down TUNING/PRESET

or , then release the button. The system automatically

tunes to the next strong station.

If the component does not turn off, repeat Steps 3 and 4 and

subustitute use the next code (if available) listed for the brand of

your component until the component responds to the remote

command.

)

MEMORY

3. Press

. C;CE flashes for 5 seconds. When C;CE goes

off, press the button again (C;CE flashes again).

Note:

To turn on or off the receiver when you select the VCR, SAT, or

POWER

TV function, press

twice.

TUNING/PRESET

4. Select the preset number with

)

Cautions:

MEMORY

5. Press

again.

• This remote control unit may not operate on all models of the

brands shown.

6. Repeat Steps 1–5 to memorize other stations (up to 30 stations

for each band). If you store a new station on a memory number

in which a station is stored, the old station is cleared.

• If batteries are removed from the battery compartment of the

remote unit, replace the batteries within 30 minutes or the codes

are lost. You must then re-enter all previously programmed

codes.

To store stations on the other band, repeat Steps 1–6, substituting

the other band in Step 1.

Note:

pressing

If you want to store more stations later, you might find that

• The buttons on the remote control unit may not work correspond-

ingly with those on the components brands.

TUNING/PRESET

only moves the tuner to the next

)

preset station (instead of moving the frequency one step). If this hap-

TUNING MODE

pens, press

to return to manual tuning (see “Switching

• Experiment with the remote control and your components to see

which buttons work. If only a few functions operate, repeat Step

4 to see if another code operates more buttons.

Between Preset Stations and Manual Tuning”).

Remote Control Operation

Download from Www.Somanuals.com. All Manuals Search And Download.

To move forward through a track, hold down TUNING/PRESET

for about 2 seconds. Repeat up to two times to increase the fast-

Auto Preset

BAND

1. Press

to select the desired band.

BAND

forward speed. To resume playback, press

/7.

MEMORY

2. Hold down

for about 3 seconds.

To move backward through a track, hold down TUNING/PRESET

for about 2 seconds. Repeat up to two times to increase the

)

3. The tuner automatically begins scanning, and stores the first 30

strong signals it receives.

BAND

rewind speed. To resume playback, press

/7.

Note:

At the beginning or end of a track on an audio CD, the

4. Scanning stops automatically after radio stations have been

stored in the auto preset memory.

scan speed returns to normal.

To skip to the next track on the CD, press TUNING/PRESET

once.

Note:

MEMO

again to stop auto scanning earlier.

Press

To store stations on the other band, repeat Steps 1–4, substituting

the other band in Step 1.

To return to the beginning of the current track, press TUNING/

PRESET

)

To return to the previous track, press TUNING/PRESET

twice.

)

Listening to Preset Stations

To stop playback, press FM MODE/ . The disc icon stops rotat-

TUN-

To listen to a radio station stored in the station memory, press

BAND

ing, and H;IKC; appears. To resume playback, press

/7.

ING MODE

TUNING/PRESET

then

)

FM MODE/

To stop playback completely, press

again.

Switching Between Preset Stations and Manual

Tuning

Changing the Sound Mode

For a surround mode, repeatedly press SURROUND until the desired

mode (J>;7J;H, >7BB, IJ7:?KC, IJ;H;E, or FHEýBE=?9) appears.

TUNING/PRESET

If you store preset stations, pressing

)

scrolls through the preset stations, rather than changing the frequen-

cy station by station.

Note:

Dolby Digital and DTS modes do not work with CDs.

To switch to scrolling by individual stations, press TUNING MODE,

Using GUI Menu Icons

TUNING/PRESET

then repeatedly press

quickly to change

)

TUNING/PRESET

the frequency by one step. Or hold down

to tune to the next clear station.

: or ;

GUI menu icons show the current track number and elapsed time of a

CD. Some icons only show the indicated information. Other icons al-

low the settings to be changed.

To switch back to scrolling through the preset stations, press TUNING

MODE TUNING/PRESET

until you

, then repeatedly press

reach the desired station.

)

Important:

You must turn on your television to view the GUI menu

icons.

CONTROLLING THE CD PLAYER

Follow these steps to view or change GUI information.

You can use the receiver’s 3-DVD changer to listen to audio CDs.

GUI

1. Press

during playback. Icons of the current track number

and the elapsed time appear.

Important:

You can only use audio CDs and some CD-Rs with the

reciever. CD-ROM, CD-G, photo CD, and CD-i discs can not be

played on this player.

2. Press the remote’s 6 or 7 to select the desired item. The cur-

rently selected item is highlighted.

POWER

1. Press

2. Press

The first icon is the track icon. If you select it, you can jump to the

ENTER

desired track number by pressing the number keys and

DVD

or by pressing ) or -.

DISC 1 DISC 2

DISC 3

to open the

3. On the receiver, press

desired drawer.

, or

The second icon is the time icon. It shows the elapsed time. You

cannot change it. It is only for viewing.

4. Place the desired CDs in the tray, then press the appropriate

DISC button again to close the drawer.

Repeat Play

REPEAT

Press

during playback. Each time you press this button, the

Note:

If you want to load more than one CD, you can press

TV screen displays the repeat mode setting and the disc will repeat a

track.

another DISC button. The receiver closes the open drawer and

opens the drawer of the DISC button you pressed.

The repeat mode changes between H;F;7JýED;, H;F;7Jý7BB, H;F;7J

7BBý:?I9I, and H;F;7JýE<< as you press the button.

DISC SKIP

5. To select a CD, repeatedly press

CD’s number blinks.

until the desired

REPEAT

To return to normal play, press

appears.

several times until H;F;7JýE<<

BAND

6. To play, press

/7.

To pause playback, press (pause icon). To resume playback,

(pause icon) BAND

Note:

Repeat play works only with discs for which the elapsed play-

press

again or press

/7.

ing time appears in the display window during playback.

Remote Control Operation

Download from Www.Somanuals.com. All Manuals Search And Download.

Programming Tracks

CONTROLLING THE SLEEP TIMER

This function allows you to program up to 32 tracks for playback in

any desired order. This function only operates with audio CDs (not

DVDs).

You can set the sleep timer to turn off the receiver after a set period

of time.

SLEEP

Repeatedly press

to set the sleep timer to the desired time ('&,

Note:

The disc must be recognized by the receiver, so play the disc

(&, )&, *&, +&, ,&, -&, .&, or /& minutes). The receiver turns off when

for a little while after loading, then program it.

the selected time has expired.

FM MODE/

PROGRAM

1. Press

2. Press

to stop the CD.

. &'ý¶ý¶ appears.

DISC SKIP

3. Repeatedly press

to select the desired CD (if neces-

sary). The CD number appears to the far right of the display.

ENTER

4. Press the appropriate numeric buttons, then press

gram the first desired track.

to pro-

5. Repeat Steps 2–4 to program more tracks.

To check the programmed order, press STOP twice. Repeatedly

press 8 or 9 to view the programmed order.

To clear the programming, press STOP twice, then press CLEAR.

Notes:

FULL

• If you try to select more than 32 tracks,

cannot program any more tracks.

appears and you

PROGRAM

• If you press

twice successively while programming,

the programming stops and F#E<< appears.

BAND

• Press

/7 to start program playback.

Modifying the Program and Adding a Track

STOP

1. Press

twice. You cannot modify the programming in

Resume Mode.

2. Repeatedly press 8 or 9 to select the desired programmed

track.

To clear the track, press CLEAR.

To change the track to another track, press the numeric buttons,

ENTER.

then

To change the track to a track on another disc, press DISC SKIP,

ENTER

the numeric buttons, then

To add a track, repeatedly press 8 or 9 until you reach the

last programmed track. Press 8 or 9 again. Enter the appro-

ENTER

priate numeric buttons, then press

track.

to program the desired

PROGRAM

BAND

3. To start program playback again, press

, then

Note:

The programmed contents are lost if you turn off the unit or

change the function.

Random Play

RANDOM

Press

. The unit randomly selects trucks.

Note:

RANDOM

also clears any programming.

Pressing

Remote Control Operation

Download from Www.Somanuals.com. All Manuals Search And Download.

ˆ DVD Player Operation

• When the inhibit icon appears on the TV screen while a button is

pressed, it means that the function is not available on the disc

you are playing.

BASIC PLAYBACK

POWER

1. Press

. The last selected function appears.

DVD

2. If necessary, press the remote’s

or rotate the receiver’s

• .Depending on the DVD disc, some operations may be different

FUNCTION

until DVD appears.

or restricted. Refer to the jacket or case of the disc you are play-

ing.

DISC 1 DISC 2

DISC 3

to open the desired disc tray.

3. Press

, or

EF;D appears and the corresponding disc indicator (1, 2, or 3)

flashes.

Stopping Play

STOP

FM MODE/

. When play is

Press the receiver’s

or the remote’s

Note:

The disc indicator 1, 2, or 3 lights even the disc is not in

STOP

stopped, the receiver remains at the point where the receiver’s

PLAY

the tray until the unit check the tray after the receiver’s

the remote’s

FM MODE/

or the remote’s

was pressed, and H;IKC; appears.

BAND/

7 is pressed.

STOP

FM MODE/

again to stop.

Press the receiver’s

or the remote’s

4. Place a disc on the disc tray with the playback side down. Place

the disc in the correct guide on the disc tray. If the disc is out of

the guide, it may damage the disc and cause the DVD player to

malfunction.

STOP

The resume option is cleared when the receiver’s

or the re-

The resume op-

tion is also cleared when the power is turned off and then on.

FM MODE/

Note:

mote’s

is pressed the second time.

PLAY

BAND/

Press the receiver’s

or the remote’s

7 to resume the

Notes:

playback from this point.

• If you leave the disc tray open for more than 8 minutes, the

disc tray automatically closes.

Notes:

• The resume option works only with discs for which the elapsed

playing time appears on the window display during playback.

• If you leave the disc tray open, the disc tray automatically

closes when the function mode is changed.

• Opening the disc tray cancels the resume option.

PLAY

BAND/

5. Press the receiver’s

or the remote’s

7. FB7O

appears. The disc tray automatically closes and the receiver

loads the disc. After loading the disc, the receiver enters menu

mode.

• The resume option may not be available on some DVD discs.

Pausing Play

Note:

DISC 1 DISC 2

DISC 3

If you close the tray by pressing

, or

MEMORY/ f

Press the receiver’s f or the remote’s

PLAY

the receiver does not load the disc. Press

to load the disc.

PLAY

To resume normal playback, press the receiver’s

or the re-

DISC SKIP

6. To select another disc, repeatedly press

on the remote

BAND/

mote’s

or the receiver until the desired disc loads.

Note:

After playing back all of the chapters in the title, the DVD

Advancing by Frames

player automatically stops and returns to the menu screen.

MEMORY/ f

Press the receiver’s f or the remote’s

while the DVD is

7. When the menu screen appears on your television screen, press

MEMO-

paused. Each time you press the receiver’s f or the remote’s

RY/ f

the remote’s 6, 7, 8, or 9 to select the Play Movie option,

, the picture advances one frame.

BAND/

PLAY

. The

then press the remote’s

receiver begins playback.

7 or the receiver’s

PLAY

To resume normal playback, press the receiver’s

or the re-

BAND/

mote’s

Cautions:

Playing in Slow-Motion

• Do not move the DVD player during playback. Doing so may

damage the disc and the unit.

SLOW – /+

Press the remote’s

during playback. During slow playback,

SLOW – /+

the playback speed and direction can be selected with

DISC 1 DISC 2

DISC 3

on the main unit to open or close

• Use

, or

the disc trays. Do not push the disc tray while it is moving. Doing

so may cause the DVD player to malfunction.

SLOW –

To decrease the playback speed, repeatedly press

SLOW +

To reverse the playback direction, press

to the playback di-

• Do not push on the disc tray or put any objects other than discs

on the disc tray. Doing so may cause the DVD player to malfunc-

tion.

rection. As you press the button the playback speed changes 1/2, 1/

4, 1/8.

PLAY

To return to normal playback, press the receiver’s

or the re-

• Keep your fingers well clear of the disc tray as it is closing. Keep

children’s fingers away from the closing disc tray as there is a

risk of personal injury.

BAND/

mote’s

DVD Player Operation

Download from Www.Somanuals.com. All Manuals Search And Download.

Below each icon is the current information for that menu (for

example, ( appears under the chapter icon when you are watch-

ing the movie’s second chapter).

Skipping Chapters

TUNING/PRESET

To skip forward, press

. The receiver skips for-

ward one chapter each time the button is pressed.

Note:

icons.

Some DVDs might not provide all of the above GUI menu

TUNING/PRESET

TUNING/

. If you press

To skip backward, press

)

PRESET

once midway through a chapter, the receiver returns to

the beginning of that chapter. The receiver then skips backward one

)

2. Press the remote’s 6 or 7 to select the desired item. The cur-

rently selected item is highlighted.

TUNING/PRESET

chapter each subsequent time you press

)

The first icon is the title icon. When you select it , you can jump

to the desired title number by pressing the remote’s number

Scanning

ENTER

keys, then

To scan forward through a DVD, hold down the remote’s TUNING/

PRESET TUNING/PRESET

-ý^{or the receiver’s}

,-ý^{for more than 1}

The second icon is the chapter icon. When you select it, you can

jump to the desired chapter number by pressing the remote’s

ENTER

second. Repeat up to three times to increase the fast-forward speed

(2X, 4X, 16X, or 100X). To resume playback, press the receiver’s

number keys, then

, or by pressing 6 or 7.

PLAY

BAND

or the remote’s

/7.

The third icon is the time icon. When you select it, you can move

to a desired time in the movie by pressing the number keys, then

To scan backward through a DVD, hold down the remote’s TUNING/

PRESET TUNING/PRESET

or the receiver’s

)

)ý# ^{for more than 1}

ENTER

second. Repeat up to three times to increase the fast-reverse speed

(2X, 4X, 16X, or 100X). To resume playback, press the receiver’s

The fourth icon is the audio icon. When you select it, you can

PLAY

BAND

or the remote’s

/7.

AUDIO

change the soundtrack language by repeatedly pressing

until the desired language appears. To select the current setting,

Notes:

ENTER

press

• The DVD player does not play back sound during slow-motion,

high-speed-reverse, or high-speed-forward playback of DVDs.

The fifth icon is the subtitle icon. When you select it, you can

SUB TITLE

change the subtitle language by repeatedly pressing

until the desired language appears. To select the current setting,

• Subtitles do not appear on the screen during slow motion or scan

playback.

ENTER

press

The last icon is the angle icon. When you select it, you can

• The DVD player provides four scan speeds in each direction for

DVD movie play.

ANGLE

change the angle by repeatedly pressing

until the desired

ENTER

number appears. To select the current setting, press

• The DVD player does not play back in slow-motion in case of

audio CD.

Using a Title Menu

• In some equipment connected to digital output for DTS sound, a

noise can be heard during fast-forward or fast-reverse playback

of DTS DVDs.

Some DVDs may contain two or more titles. If the disc has a title

TITLE

menu recorded on it, you can use

to select the movie title.

Notes:

ADVANCED FEATURES

• The details of operation differ depending on the DVD.

• Selecting a title may not be possible on certain DVD discs.

Follow these steps to select a movie title.

Note:

For the advanced features, the receiver’s display screen does

not change. The displays appear on your television screen.

Using GUI Menu Icons

TITLE

1. Press

. A list of the DVD’s titles appears.

GUI menu icons show disc information (for example, title or chapter

number, elapsed playing time, audio/subtitle language, angle) and

player information (for example, repeat play, play mode).

BAND/

ENTER

to resume play from the scene when

2. Press

7 or

TITLE

was first pressed.

ENTER

BAND/

3. Press the remote’s 8, 9, 6, or 7, then

Some icons only show the indicated information. Other icons allow

the settings to be changed.

Or press the numeric button(s), to select the desired title. The

selected title now starts playing.

Follow these steps to view or change GUI information.

Using a DVD Menu

GUI

1. Press

during playback.

Title function can also be accessed from the stop mode.

Some DVDs have unique menus called DVD menus. For example,

DVDs programmed with complex contents provide guide menus, and

those recorded with various languages provide menus for audio and

subtitle language.

Note:

Icons of the current title number, current chapter number,

elapsed time, the current audio soundtrack language, current

subtitle language, and current angle number appear.

The DVD menu’s contents and operation differ from disc to disc. The

following procedure explains the basic operation when this feature is

used.

DVD Player Operation

Download from Www.Somanuals.com. All Manuals Search And Download.

Press

during play. The DVD menu available on the disc now

The repeat mode changes between 9>7FJ;Hý H;F;7J, J?JB;ýH;F;7J,

RETURN

appears. Pressing

was first pressed.

resumes play from the scene when

and H;F;7JýE<< as you press the button.

REPEAT

To return to normal play, press

pears.

several times until OFF ap-

Note:

The resume play option might not be possible on certain discs.

ENTER

Notes:

Press the remote’s 8, 9, 6, or 7, then

. Or press the nu-

meric button(s) to select the desired item. The selected item is now

executed.

• .Repeat Play works only with discs for which the elapsed playing

time appears in the DVD display window during playback.

Changing Subtitle Language

• Repeat Play may not work correctly with some DVDs.

Note:

This operation works only with DVDs on which multiple subtitle

Zooming In

languages are recorded.

The Zoom feature allows you to zoom in and enlarge the picture on

the screen to either 4 times (X4) or 16 times (X16) its normal size.

SUB TITLE

Press

during playback. When no subtitles are recorded,

SUB

E<< appears instead of the language number. Repeatedly press

TITLE

until the desired language is selected.

ZOOM

Press

during normal playback or still playback.

SUB TITLE

To eliminate subtitles, repeatedly press

and select E<<.

ZOOM

To resume normal size, press

to cancel the zoom feature and

resume normal playback or still playback.

Notes:

• When the desired language is not selected even after pressing

the button several times, it means that the language is not avail-

able on the disc.

• Some DVDs may not respond to the zoom feature.

• The zoom feature does not work on subtitles or menus included

on DVD video discs.

• When the power is turned off or the DVD player is stopped, the

subtitle language selected at the initial settings appears.

SETTING RATING LEVEL AND PASSWORD

Changing Soundtrack Language

This is to prohibit the playing of specified DVDs which are unsuitable

for children. Some DVD discs contain a restriction level which en-

ables parents to remove scenes or prevent playback of discs by chil-

dren. The DVD player is equipped with a password device designed

to prevent children from changing the level.

Note:

This operation works only with DVDs on which multiple

soundtrack languages are recorded.

AUDIO

Press

during play. The currently selected soundtrack lan-

AUDIO

guage appears. Repeatedly press

is selected.

until the desired language

Selecting a Rating Level

Notes:

DVD SET UP

1. Press

• When the desired language is not selected even after pressing

the button several times, it means that the language is not avail-

able on the disc.

2. At the setup screen, press 8 or 9 to select H7J?D=, then press

ENTER

• When the power is turned off or the DVD player is stopped, the

language heard is the one selected at the initial settings.

Note:

The password is set to 1,2,3,4 as a default. The rating is

set to unlock as a default.

ENTER

3. Enter a password and press

Viewing from Another Angle

ENTER

4. Repeatedly press

to select the desired level.

Some DVDs may contain scenes which have been shot simulta-

neously from a number of different angles. For these discs, the same

You cannot play DVD video discs rated higher than the level you

selected unless you cancel the parental lock function. For exam-

ple, when you select level 7, discs rated higher than level 7 are

blocked and cannot be played.

AN-

scene can be viewed from each of these different angles using

GLE

. The recorded angles differ depending on the disc.

ANGLE

Press

during playback. The currently selected angle appears.

ANGLE

Repeatedly press

until the desired angle is selected.

The parent lock level is equivalent to the following USA movie

ratings.

Note:

This function only works for discs having scenes recorded at

different angles.

Level

Movie Rating

Using Repeat Play

NC-17

REPEAT

Press

during playback. Each time you press this button, the

TV screen displays the repeat mode setting and the disc will repeat a

chapter or title.

PG-13

DVD Player Operation

Download from Www.Somanuals.com. All Manuals Search And Download.

DVD SET UP

5. Press

to exit.

',0/ýM?:; (Widescreen) — If you have a wide-screen TV set, use

this setting. The DVD plays in full size. (You must also set your

widescreen TV to “full size”).

Notes:

• Some titles do not match with the rating level described as

above.

SELECTING DIGITAL AUDIO OUT

Each DVD has a variety of audio output options. If you connected a

device to the receiver’s digital optical jacks (see “Connecting a Digital

Optical Audio Devices” on Page 7), you might have to change the

digital audio output setting. Set the player’s Digital Audio Output ac-

cording to the type of audio system you use.

• If you change the level and enter a password, playback of all

DVDs with ratings higher than your selection will be blocked,

unless you enter the correct password again. For example: if you

change the level to 5, the DVD player will not play discs with rat-

ings of 6, 7, or 8 unless the correct password is entered from the

remote control.

DVD SET UP

1. Press

Setting a Password

2. At the setup screen, press 8 or 9 to select :?=?J7BýEKJ.

ENTER

to select the desired output (F9C or

If you change the rating level to 7 or lower, you must enter a 4-digit

password to access playback of discs with higher ratings.

3. Repeatedly press

ENTER

8?JIJH;7C) , then press

To set this password, follow these steps.

8?JIJH;7C — Select 8?JIJH;7C if you have an amplifier or other

equipment with DTS decoder or Dolby Digital decoder connected

to the receiver.

DVD SET UP

1. Press

2. At the setup screen, press 9 to select F7IIMEH:, then press

F9C — Select F9C if you have an amplifier or other equipment

with linear PCM only (or a MD recorder or a DAT deck) con-

nected to the receiver.

ENTER

3. Type a 4-digit password into EB:. (For example, 1234).

Important:

Caution:

If an active digital audio output signal is supplied to an re-

ceiver or other equipment without a corresponding digital decoding

capability, a very loud noise may be produced which could perma-

nently damage the speakers.

Do not forget your password.

ENTER

4. Type same the 4-digit password into D;M, then press

Clearing Your Password

Note:

When you make a digital recording from CD to your house au-

dio CD recorder entire CD tracks are recorded as 1 track. This is be-

cause there is no track information.

If you forget your password, you can clear the current password.

EN-

At the SETUP screen, press 9 to select F7IIMEH:, then press

TER

ENTER

Enter 4-digit number (for example, 2850), then press

digit password is cleared.

. The 4-

SELECTING TV ASPECT

Select the appropriate screen type according to your TV set. Conven-

tional size screens use a 4:3 aspect ratio, and wide-screens use a

16:9 ratio.

DVD SET UP

1. Press

2. At the setup screen, press 8 or 9 to select JLý:?IFB7O, then

ENTER

press

ENTER

3. Repeatedly press

to select the desired aspect, then press

DVD SET UP

. You must select the type of TV picture (aspect ratio)

that corresponds to the type of TV you are connecting to the

DVD unit.

*0)ýFI (Pan & Scan) — If you have a conventional TV set and

your DVD is not formatted for widescreen viewing, use this set-

ting.

*0)ýB8 (Letterbox) — If you have a conventional TV set and your

DVD is formatted for widescreen viewing, use this setting. All

video material not formatted in the Pan & Scan style is played

back in the letterbox style. Black bands appear at top and bottom

of screen.

DVD Player Operation

Download from Www.Somanuals.com. All Manuals Search And Download.

ˆ Troubleshooting

This receiver has been manufactured to the specifications of RadioShack and is covered by a limited warranty from RadioShack. If your receiv-

er is not operating as it should, take it to your local RadioShack store or call 1-800-THE-SHACK for assistance.

Incorrect operation is often mistaken for trouble and malfunctions. If you think that there is something wrong with this component, check the

points below. Sometimes the trouble may lie in another component. Investigate the other components and electrical appliances being used.

Symptom

Cause

Remedy

No power.

The power cord is disconnected.

Plug the power cord into the wall outlet securely.

The power is on, but the DVD player No disc is inserted.

does not work.

Insert a disc. (Check that the DVD or audio CD indicator in the DVD

display is lit.)

No picture.

The TV is not set to receive DVD signal output. Select the appropriate video input mode on the TV so the picture

from the DVD player appears on the TV screen.

The video cable is not connected securely.

The connected TV power is turned off.

The disc is dirty.

Connect the video cable into the jacks securely.

Turn on the TV.

The playback picture is poor.

Clean the disc.

The DVD player does not start play- No disc is inserted.

back.

Insert a disc. (Check that the DVD or audio CD indicator in the DVD

display is lit.)

An unplayable disc is inserted.

Insert a playable disc. (Check the disc type, color system and

regional code.)

The disc is placed upside down.

The disc is not placed within the guide.

The disc is dirty.

Place the disc with the playback side down.

Place the disc on the disc tray correctly inside the guide.

Clean the disc.

SETUP

to turn off the menu screen.

A menu is on the TV screen.

The rating level is set.

Press

Cancel the rating function or change the rating level.

The remote control does not work

properly.

The remote control is not pointed at the remote Point the remote control at the remote sensor of the unit.

sensor of the unit.

The remote control is too far from the unit.

Operate the remote control within about 23 ft (7 m).

Remove the obstacle.

There is an obstacle in the path of the remote

control and the DVD player.

The remote’s batteries are exhausted.

Replace the batteries with new ones.

The receiver does not respond when Static electricity caused by dry air.

the buttons are pressed.

Disconnect the power plug from the outlet, and insert again.

No sound is output when a function

is selected.

Improper connections

Make sure the component is connected correctly.

MUTE

Sound is muted.

Press the remote’s

VOLUME

The volume is turned down.

Improper connections.

Adjust

No image is output when a function

is selected.

Make sure the component is connected correctly.

Press the correct function button.

Tune in the correct frequency.

The input source is not properly selected.

Incorrect frequency.

Considerable noise in radio broad-

casts.

The antenna is not connected.

Connect the antenna.

RF (AC-3) and/ or digital cables are near the Route

RF (AC-3) and digital cables away from the antenna termi-

antenna terminals and wires.

nals and wires.

(For FM) The FM antennais not fully extended

or is poorly positioned.

Fully extend the FM wire antenna, position for best reception, and

secure to a wall.

(For FM) The signal is weak.

Connect an outdoor FM antenna.

(For AM) The AM antenna is poorly positioned. Adjust the direction and position for best reception.

(For AM) The signal is weak.

Connect an additional internal or external AM antenna.

Interference caused by other equipment (for

example, flourescent lights, motors).

Turn off the equipment causing the noise or move it away from the

receiver.

Place the antenna farther away from the equipment causing the

noise.

Broadcast stations cannot be

selected automatically.

The signals are weak.

The dimmer is on.

Connect an outdoor antenna.

DIMMER

repeatedly to return to the default setting.

The display is dark or off.

Press

Troubleshooting

Download from Www.Somanuals.com. All Manuals Search And Download.

Symptom

Cause

Remedy

When listening to the music in ste-

reo, left/right speakers sounds are

reversed.

Speakers are connected wrong.

After checking, if needed, reconnect.

Low hum or buzz sound.

Power line of a fluorescent light is installed near Place this product as far away as possible from electric devices with

this product.

interference.

Sound is only heard from one chan- One of the input cords is disconnected.

Connect the input cords securely.

Adjust the speaker level.

nel.

The speaker level is set to one side.

Sound cuts off or there is no sound

even though power is on.

Speaker impedance is less than prescribed for

this unit.

After turning off the power and then turning it on again, reduce the

volume or change to the correct 6-ohm speakers.

Low bass response.

Speaker polarity(+/–) is reversed.

Check all speakers for correct polarity.

Set the mode to the desired surround mode position.

Use surround or stereo source.

STEREO

No sound from the rear speakers.

Surround Mode is set to

Source being played is not recorded or broad-

cast in surround sound or stereo.

One or more rear speaker wires is not making

good contact,

Check all rear speaker wires for good connection.

DTS DOLBY DIG-

DTS DOLBY DIGITAL DOLBY PRO LOGIC

No sound from the center speaker.

Surround Mode is not set to

Set Surround Mode to

STEREO

ITAL DOLBY PRO LOGIC STEREO

If the receiver does not operate normally due to external effects such as static electricity, disconnect the power plug from the outlet and insert

again to return to normal operating conditions.

CARE

Keep the receiver dry; if it gets wet, wipe it dry immediately. Use and store the receiver only in normal temperature environments. Handle the re-

ceiver carefully; do not drop it. Keep the receiver away from dust and dirt, and wipe it with a damp cloth occasionally to keep it looking new.

Modifying or tampering with the

authorization to operate it. If your

’s internal components can cause a malfunction and might invalidate its warranty and void your FCC

receiver

is not performing as it should, take it to your local RadioShack store for assistance.

receiver

Caution:

You might permanently damage your speakers by cleaning them with a vacuum cleaner. Use a feather duster or a soft loose cloth in-

stead.

Troubleshooting

Download from Www.Somanuals.com. All Manuals Search And Download.

ˆ Manuracturer’s Codes

TV Codes

Brand

JC PENNY

Codes

104, 105, 106, 108, 122, 152, 154, 158, 163,

172, 185, 187, 205, 228, 271, 272, 281

Brand

Codes

ABEX

272

JCB

102

ADMIRAL

101

JENSEN

104, 106

AKAI

102

JVC

112, 113, 154, 156, 160, 165, 166, 167, 189,

257, 258, 259

ALLERON

AMTRON

146

138

KAWASHO

102, 104, 106

104, 106, 119

169, 283

AOC

104,105,106,107

KENWOOD

AUDIOVOX

BELCOR

138

KLOSS NOVABEAM

KTV

104

138, 271

BELL & HOWELL

BRADFORD

BROKWOOD

CANDLE

101, 262

138

LG (GOLDSTAR)

104, 105, 106, 112, 119, 156, 158, 255, 256,

271, 272

104

LOEWE

LUXMAN

LXI

162

104, 106, 108

102

104, 106

CELEBRITY

CITIZEN

106, 149, 162, 172, 185, 262, 281

104, 106, 108, 138, 205, 271

MAGNAVOX

104, 106, 108, 119, 162, 169, 174, 175, 176,

177, 188, 189, 226, 230, 231, 232, 233, 234,

254, 283, 284

COLORTYME

CONCERTO

CONTEC/CONY

CRAIG

104, 106

MARANTS

MARANTZ

MEGATRON

MEMOREX

MGA

162

112, 113, 138

104, 106, 162

138

106, 159

CROWN

138, 271

101, 106, 182, 262

CURTIS MATHES

CXC

104, 106, 115, 185, 205, 262, 271

104, 105, 106, 119, 122, 151, 179, 180, 182

138

MIDLAND

MINUTZ

154, 271, 272, 281

152

DAEWOO

104, 105, 106, 117, 118, 271

DAYTRON

DIMENSIA

DUMONT

104, 106, 271

MITSUBISHI

104, 105, 106, 119, 122, 151, 179, 180, 181,

182, 210, 221, 225

185

104

MOTOROLA

MTC

103

ELECTROBAND

ELECTROHOME

EMERSON

102

104, 105, 106, 205

103, 104, 106, 119, 122

MULTITECH

MULTIVISION

NAD

138

104, 106, 112, 124, 125, 126, 127, 128, 129,

130, 131, 132, 134, 135, 136, 138, 139, 141,

142, 146, 262, 271, 279

184

106, 172

NEC

103, 104, 105, 106, 189

ENVISION

FISHER

FUJITSO

FUNAI

104, 106

NIKKO

106

148, 149, 151, 262, 280

ONWA

138

146

ORION

135

138, 146

138

PANASONIC

PHILCO

103, 154, 162, 230, 270

FUTURETEC

103, 104, 105, 106, 108, 112, 119, 162, 169,

174, 175, 177, 283, 284

103, 104, 106, 110, 119, 121, 122, 152, 154,

155, 185, 187, 200, 221, 230, 264, 265, 281

PHILIPS

103, 104, 108, 112, 119, 162, 169, 174, 175,

176, 186, 187, 188, 189, 230

GIBRALTER

GRUNDY

104

138, 146, 271

104, 106

138

PILOT

104, 271

HALLMARK

HARVARD

HITACHI

PIONEER

PORTLAND

PRICE CLUB

PRISM

104, 106, 190, 191, 192, 279

104, 105, 106, 271

104, 106, 110, 112, 113, 119, 140, 159, 160,

214, 235, 236, 237, 238, 239, 240, 242, 243,

244, 245, 246, 248, 279

205

154

IMA

138

162

PROSCAN

PROTON

PULSER

185, 281

104, 106, 112

104

INFINITY

JBL

Manuracturer’s Codes

Download from Www.Somanuals.com. All Manuals Search And Download.

Brand

QUASAR

Codes

Brand

Codes

103, 154

AUDIO DYNAMICS

AUDIOVOX

BEAUMARK

BELL&HOWELL

CALIX

409, 410

RADIOSHACK/REALIS- 104, 106, 112, 138, 149, 185, 262, 271, 272

TIC

414

413

RCA

103, 104, 105, 106, 107, 110, 119, 120, 121,

135, 156, 185, 198, 199, 200, 201, 202, 210,

221, 279, 281, 287, 290

411

414

CANDLE

413, 414, 423, 461

SAMPO

104, 106, 271, 272

CANON

421

462

461

SAMSUNG

104, 105, 106, 112, 115, 119, 204, 205, 206,

271, 272

CARVER

SAMSUX

SANYO

271

CCE

104, 109, 148, 149, 180, 207, 208, 210, 262,

280

CITIZEN

413, 414, 415, 416, 417, 418

COLORTYME

COLT

409

SCOTCH

SCOTT

SEARS

106

461

104, 106, 112, 124, 135, 138, 146

CRAIG

413, 414, 423, 461

104, 106, 113, 119, 146, 148, 149, 151, 166,

172, 185, 209, 210, 262, 280, 281

CURTIS-MATHES

CYBERNEX

DAEWOO

409, 412, 413, 416, 418, 421, 515

413

SHARP

104, 106, 112, 129, 211, 212, 213, 221, 222, 271

415, 417, 426, 428

SHOGUN

SIGNATURE

SIMPSON

SONY

104

DBX

409, 410

412

101

DIMENSIA

DYNATECH

ELECTROHOME

ELECTROPHONIC

EMERSON

108

426

102

414, 429

414

SOUNDESIGN

SSS

104, 106, 108, 138, 146

104, 138

138

414, 415, 421, 426, 429, 430, 432, 433, 435,

436, 437, 438, 439, 440, 441, 442, 444, 445,

465, 513, 516, 517, 530

STARLITE

SUPREME

SYLVANIA

102

104, 106, 108, 119, 162, 169, 174, 175, 176,

177, 188, 283, 284

FISHER

405, 411, 419, 423, 448, 449, 450, 451, 518

FUJI

421, 519

SYMPHONIC

TATUNG

138

FUNAI

426

103

GARRARD

426

TECHNICS

TECHWOOD

TEKNIKA

154

401, 412, 413, 421, 453, 515, 520

104, 106, 154

GRADIENTE

HARLEY DAVIDSON

HARMAN KARDON

HARWOOD

HEADQUARTER

HI-Q

426

409

461

411

423

104, 105, 106, 108, 112, 113, 138, 146, 176, 182

205, 270, 271

TELECAPTION

TOSHIBA

149, 172, 189, 205, 209, 210, 217, 218, 221,

260, 262

UNIVERSAL

VICTOR

152, 187

166

HITACHI

421, 455, 456, 457, 489, 497, 507, 511, 520,

522

VIDTECH

WARDS

104, 105, 106

101, 104, 105, 106, 107, 124, 146, 152, 162,

169, 174, 175, 176, 185, 187, 188, 219, 220,

284

INSTANT REPLAY

JC PENNEY

421

409, 410, 411, 413, 414, 421, 455, 456, 458,

459, 460, 507, 518

YANAHA

ZENITH

104, 105, 106, 119

104, 247, 253, 254

JCI

421

JENSEN

JVC

455, 456, 511

VCR Codes

409, 410, 411, 418, 420, 421, 458, 462, 468,

477, 511, 523

KENWOOD

KLH

409, 410, 411, 416, 418, 456, 511, 523

Brand

Codes

461

ADMIRAL

ADVENTURA

AIWA

531

KODAK

414, 421

426

LG (GOLDSTAR)

LLOYD

409, 414, 418, 454, 506

426

AKAI

403, 404, 512, 513

LOGIK

461

AMERICAN HIGH

ASHA

421

413

LXI

414

MAGNAVOX

421, 462, 463, 504, 508, 524

Manuracturer’s Codes

Download from Www.Somanuals.com. All Manuals Search And Download.

Brand

Codes

Brand

Codes

MAGNIN

413

SANYO

SCOTT

SEARS

405, 411, 413, 423

MARANTZ

MARTA

409, 410, 411, 416, 418, 421, 458, 462

415, 432, 435, 438, 465, 493, 516

414

401, 414, 421, 423, 448, 449, 450, 451, 455,

456, 507, 518

MASUSHITA

MEI

421

SHARP

417, 429, 431, 494, 495, 496, 531

421

SHINTOM

SHOGUN

SIGNATURE

SINGER

404, 456, 46, 498

MEMOREX

MGA

411, 413, 414, 421, 423, 426, 504, 531

413

429, 465, 513

421, 449, 462, 504

413

531

MGGNAVOX

MGN TECHOLOGY

MIDLAND

MINOLTA

421, 461, 528

SONY

404, 421, 425, 427, 434, 498, 499, 519, 528

453

STS

421, 507

455, 456, 507

SYLVANIA

SYMPHONIC

TANDY

421, 426, 462, 463, 465, 524

MITSUBISHI

406, 407, 419, 421, 424, 429, 455, 456, 465,

466, 467, 469, 470, 471, 472, 473, 474, 506,

513, 523

426

411, 106

MONTGOMERY WARD

MOTOROLA

MTC

531

TASHIKO

TATUNG

414, 113, 138

421, 531

458, 511

413, 426

TEAC

426, 458, 511

MULTITECH

NEC

413, 416, 426, 453, 461

TECHINICS

TEKNIKA

TMK

421, 409

409, 410, 411, 416, 418, 458, 511, 523

414, 421, 426

NIKKO

414

413

NOBLEX

413

TOSHIBA

TOTEVSION

UNITECH

VECTOR RESEARCH

VIDEOSONIC

WARDS

415, 449, 451, 455, 465, 493, 506, 516

OLYMPUS

OPTIMUS

OPTONICA

ORION

421

413, 414

414, 421, 431, 446, 494, 509, 531

413

496

409, 410, 415, 416, 513

413

435

PANASONIC

PENTAX

421, 446, 509, 525, 526, 531

413, 414, 415, 421, 423, 426, 429, 455, 456,

461, 496, 501, 502, 503, 507, 516, 531

416, 455, 456, 507, 520

PENTEX RESEARCH

PHILCO

418

XR-1000

YAMAHA

ZENITH

421, 426, 461

421, 462, 463

409, 410, 411, 418, 458, 511

404, 498, 504, 519, 528

PHILIPS

421, 462, 496, 524

PILOT

414

Cable Codes

PIONEER

PORTLAND

PROSCAN

PROTEC

410, 443, 455, 480, 481, 523

416, 417

401, 412

461

Brand

Codes

ABC

702, 703, 704, 705, 706, 709, 753

ANTRONIX

ARCHER

708, 709

PULSAR

504

708, 709, 710, 711

QUARTER

QUARTZ

411

CABLETENNA

CABLEVIEW

CENTURY

CITIZEN

708

411

708

QUASAR

421, 525

711

RADIOSHACK/REALIS-

TIC

411, 413, 414, 421, 423, 426, 429, 449, 450,

496, 531

711

RADIX

RANDEX

RCA

414

COLOUR VOICE

COMTRONICS

CONTEC

712, 713

714, 715

716

401, 403, 412, 413, 415, 421, 431, 446, 448,

453, 454, 455, 456, 462, 482, 483, 484, 486,

487, 488, 489, 490, 491, 494, 507, 509, 515,

520, 525, 531

EASTERN

717

GARRARD

GC ELECTRONICS

GEMINI

711

RICHO

528

709

RUNCO

SAMSUNG

SANKY

504

718, 719, 749

413, 415, 433, 453

504, 531

GENERAL INSTRUMENTS 703

GRADIENT

HAMLIN

781

SANSUI

410, 511, 523

720, 721, 722, 735, 745

Manuracturer’s Codes

Download from Www.Somanuals.com. All Manuals Search And Download.

Brand

Codes

Brand

Codes

HITACHI

HYTEX

703

702

711

DRAKE

758, 759

743

ECHOSTAR

JASCO

778

JERROLD

703, 705, 707, 714, 718, 723, 724, 746, 753,

782, 783, 784, 785, 788, 789, 790, 791, 792

GENERAL INSTRUMENTS 760, 761, 762

PANASONIC

PIONEER

PRIMESTAR DBS

PROSCAN

RCA

757

LG (GOLDSTAR)

MAGNAVOX

MEMOREX

MOVIE TIME

NSC

770, 771, 779, 780

739

725

776

726

778

702, 727, 728

754, 755, 778

702, 727, 728

REALISTIC

SONY

763

OAK

702, 727, 728

772, 725, 727, 740

PANASONIC

PARAGON

PHILIPS

748, 752

STS1

764

765

766

767

768

769

726

STS2

711, 712, 713, 714, 725, 730, 731, 732

STS3

PIONEER

PULSAR

701, 733, 734, 742

STS4

726

TODHIBA

UNIDEN

RADIOSHACK

RCA

770, 771, 779, 780

747, 749, 752

REALISTIC

REGAL

709, 749

722, 735

REGENCY

REMBRANDT

RUNCO

717

703

726

S.A

737, 738, 786, 787

SAMSUNG

SCIENTIFIC ATALANTA

SIGNAL

714, 734

706, 736, 737, 738

714, 718

SIGNATURE

SL MARX

SPRUCER

STARCOM

STARGATE

STARQUEST

TANDY

703

714, 525

752

707, 718, 753

714, 718

718

740

TELEVIEW

TOCOM

714

704, 723, 741

TOSHIBA

TSUA

726

718

TV86

727

UNIKA

708, 709, 711

702

UNITED ARTISTS

UNITED CABLE

UNIVERSAL

VIDEOWAY

VIEWSTAR

ZENITH

753, 713

708, 709, 710, 711

744

715, 725, 727, 740

726, 750, 751, 774, 777

SAT Codes

Brand

Codes

CHAPPARAL

756, 757

Manuracturer’s Codes

Download from Www.Somanuals.com. All Manuals Search And Download.

ˆ Specifications

Amplifier Section

Output Power (6 ohms, 40 Hz ~ 20 kHz, 0.9% T.H.D) : Stereo .......................................................................................... Front L/R (2 Channel Driven)100W x 2ch

Output Power (6 ohms, 1 kHz, 0.9% T.H.D)

Front L/R (2 Channel Driven)................................................................................................................................................................................... 100 W x 2ch

Center (1 Channel Driven) ....................................................................................................................................................................................... 100 W x 1ch

Rear L/R (2 Channel Driven).................................................................................................................................................................................... 100 W x 2ch

Subwoofer (1 Channel Driven)................................................................................................................................................................................. 100 W x 1ch

Distortion at 1 kHz, 100 W

Front L/R .......................................................................................................................................................................................................................... < 0.9%

Center/Subwoofer ............................................................................................................................................................................................................ < 0.9%

Rear L/R........................................................................................................................................................................................................................... < 0.9%

S/N Ratio (IHF-A Weighted)

STEREO-TV (Line) ......................................................................................................................................................................................................... > 80 dB

S/N Ratio (IHF-A Weighted, -20dB FS)

SURROUND Front.......................................................................................................................................................................................................... > 65 dB

SURROUND Center........................................................................................................................................................................................................ > 65 dB

SURROUND Rear........................................................................................................................................................................................................... > 65 dB

Frequency Response

Center (Large)...................................................................................................................................................................................... 10 - 20 kHz, -3 dB/+1 dB

Subwoofer....................................................................................................................................................................................................... 10 - 120 Hz, -3 dB

Tone Control

Bass (100 Hz) .................................................................................................................................................................................................................+/-10 dB

Treble (10 kHz)................................................................................................................................................................................................................+/-10 dB

Input Sensitivity

Video (Monitor Output) ......................................................................................................................................................................................... 1 Vpp/75 ohm

Output Level

Audio (Tape REC OUT)....................................................................................................................................................................................... 280 mV/1 kohm

Video (Monitor Out).............................................................................................................................................................................................. 1 Vpp/75 ohm

Cross-Talk (Separation)

Dolby Digital.................................................................................................................................................................................................................... > 45 dB

Delay Time

Dolby Pro Logic............................................................................................................................................................................................ Rear: 15 - 30 msec.

Center : 0 - 5 msec.

Tuner Section

(FM) Frequency Range ............................................................................................................................................................................................... 87.5 - 108 MHz

(FM) Sensitivity

Mono (THD 3%) .................................................................................................................................................................................................... 15 uV/m, EMF

(FM) Distortion (15 kHz LPF on)

Mono ................................................................................................................................................................................................................................ < 0.4%

Stereo............................................................................................................................................................................................................................... < 0.5%

(FM) S/N Ratio

(FM) Frequency Response...................................................................................................................................................................................... 20 - 15 kHz, -3 dB

(AM) Frequency Range............................................................................................................................................................................................... 520 - 1710 kHz

(AM) Sensitivity ( Loop Antenna).......................................................................................................................................................................................... 600 uV/m

(AM) Selectivity, +/- 10K.......................................................................................................................................................................................................... > 25 dB

(AM) S/N Ratio ........................................................................................................................................................................................................................ > 40 dB

Video Section

Output Level.......................................................................................................................................................................................................... 1.0 V (p-p), 75 ohm

Specifications

Download from Www.Somanuals.com. All Manuals Search And Download.

S-Video Y-Output Level.......................................................................................................................................................................................... 1.0 V(p-p), 75 ohm

S-Video C-Output Level ..................................................................................................................................................................................... 286 mV(p-p), 75 ohm

S/N Ratio................................................................................................................................................................................................................................. > 45 dB

Speaker Section

Type

2 Way 2 Speakers Vented Enclosure ........................................................................................................................................................ x 1 (Front, Surround)

2 Way 3 Speakers Vented Enclosure ....................................................................................................................................................................... x 1 (Center)

1 Way 2 Speakers Bandpass Enclosure ........................................................................................................................................................... x 1 (Subwoofer)

Impedance.................................................................................................................................................................................................................................. 6 ohm

Power Handling Capacity.............................................................................................................................................................................................. 60 Watts RMS

Miscellaneous

Power Requirement................................................................................................................................................................................................... AC 120 V, 60 Hz

Power Consumption............................................................................................................................................................................................................... ???????

Weight .................................................................................................................................................................................................................................. 37 lb 1 oz

(16.7 kg)

Dimension (W x H x D)............................................................................................................................................................... 16-15/16 × 5-8/16 × 15-12/16 inches

(430 × 140 × 400 mm)

Accessories ............................................................................................................................................................................................ Indoor FM Antenna (T Type)

Adapter for FM Antenna

AM Loop Antenna

Owner's Manual

Universal Remote Unit

Audio/Video Wire

Specifications are typical; individual units might vary. Specifications are subject to change and improvement without notice.

Specifications

Download from Www.Somanuals.com. All Manuals Search And Download.

Radio Shack Speaker 40 1034 User Guide
RBH Sound Lawn Mower RBH 180 User Guide
Regency Indoor Fireplace L676 User Guide
Sakar Digital Camera 16381 User Guide
Samsung Cell Phone GH68 03401A User Guide
Samsung Home Theater System HT C5550 User Guide
Samsung Security Camera SNC B2331P User Guide
Schneider Electric Automobile Parts MA40 704X User Guide
Sears Paint Sprayer 486245332 User Guide
Sennheiser Headphones CC550 User Guide