Samsung Flat Panel Television WS 32M206V User Guide

AA68-03336A-01Eng 6/28/04 4:08 PM Page 1  
COLOUR  
TELEVISION  
Owner’s Instructions  
Before operating the unit,  
please read this manual thoroughly,  
and retain it for future reference.  
ON-SCREEN MENUS  
PICTURE IN PICTURE  
TELETEXT  
Download from Www.Somanuals.com. All Manuals Search And Download.  
AA68-03336A-01Eng 6/28/04 4:08 PM Page 3  
Contents  
CONNECTING AND PREPARING YOUR TELEVISION  
View of Your Television (depending on the model).......................................  
Infrared Remote Control................................................................................  
Inserting the Batteries in the Remote Control................................................  
Connecting to an Aerial or Cable Television Network ...................................  
Switching Your Television On and Off...........................................................  
Placing Your Television in Standby Mode.....................................................  
Becoming Familiar with the Remote Control .................................................  
Plug & Play Feature.......................................................................................  
Viewing the Demonstration............................................................................  
Choosing Your Language..............................................................................  
5
6
8
8
9
9
10  
11  
12  
12  
SETTING THE CHANNELS  
Storing Channels Automatically.....................................................................  
13  
14  
15  
17  
18  
19  
Sorting the Stored Channels .........................................................................  
Storing Channels Manually............................................................................  
Skipping Unwanted Channels .......................................................................  
Assigning Names to Channels ......................................................................  
Fine Tuning Channel Reception....................................................................  
USING YOUR TELEVISION  
Using the LNA (Low Noise Amplifier) feature (depending on the model)......  
20  
21  
22  
23  
24  
24  
25  
25  
26  
26  
27  
28  
29  
30  
31  
Changing the Picture Standard .....................................................................  
Adjusting the Picture Settings........................................................................  
Selecting the Colour Tone.............................................................................  
Selecting the Picture Size.............................................................................  
Selecting the Digital NR.................................................................................  
Using the Tilt Control Feature........................................................................  
Setting the Blue Screen.................................................................................  
Freezing the Current Picture .........................................................................  
Changing the Sound Standard ......................................................................  
Adjusting the Sound Settings ........................................................................  
Extra Sound Settings (depending on the model) ..............................................  
Selecting the Sound Mode (depending on the model) ..................................  
Selecting the Melody .....................................................................................  
Setting and Displaying the Current Time.......................................................  
English-3  
Download from Www.Somanuals.com. All Manuals Search And Download.  
AA68-03336A-01Eng 6/28/04 4:08 PM Page 4  
Contents(continued)  
USING YOUR TELEVISION (continued)  
Setting the Sleep Timer.................................................................................  
32  
33  
34  
35  
36  
Switching the Television On and Off Automatically.......................................  
Setting the Preferred Volume Level/Channel ................................................  
Viewing an External Signal Source/Edit Name (depending on the model)....  
Viewing the Picture In Picture (PIP) (depending on the model) ....................  
USING THE TELETEXT FEATURE  
Teletext Feature ............................................................................................  
39  
39  
40  
41  
41  
Displaying the Teletext Information ...............................................................  
Selecting a Page by Number.........................................................................  
Using FLOF to Select a Page........................................................................  
Storing Teletext Pages ..................................................................................  
ADDITIONAL INFORMATION ON CONNECTIONS  
Connecting to the External Input/Outputs......................................................  
Connecting to the Audio Output ....................................................................  
Connecting to the RCA Input.........................................................................  
Connecting to the S-Video Input....................................................................  
Viewing Pictures From External Sources ......................................................  
42  
42  
43  
43  
44  
RECOMMENDATIONS FOR USE  
Automatic Degaussing to Remove Colour Patches.......................................  
45  
45  
Troubleshooting: Before Contacting Service Personnel................................  
Symbols  
Press  
Important  
Note  
English-4  
Download from Www.Somanuals.com. All Manuals Search And Download.  
AA68-03336A-01Eng 6/28/04 4:08 PM Page 5  
View of Your Television (depending on the model)  
The actual configuration on your TV may be different, depending on  
your model.  
Control Panels  
7
6
1
6
5
4
3
2
5
4
1
7
6
5
4
2
3
1
3
2
1
3
2
6
5
4
1) Power On/Off  
2) Standby Indicator  
5) Volume Adjustment  
6) Menu Display  
3) Remote Control Sensor  
4) Channel Selection  
7) Input source selection  
Connection Panels  
Side of the TV  
Rear of the TV  
Audio Input (R, L)  
Video Input  
S-Video Input  
SCART Audio/  
Video Input/Output  
Monitor Audio Output  
75Coaxial Connector for Aerial/Cable Network  
English-5  
Download from Www.Somanuals.com. All Manuals Search And Download.  
AA68-03336A-01Eng 6/28/04 4:08 PM Page 6  
Infrared Remote Control  
TELEVISION STAND-BY  
PICTURE SIZE  
SOUND MODE SELECTION  
AUTOMATIC SWITCH-OFF  
DIRECT CHANNEL SELECTION  
ONE/TWO-DIGIT  
CHANNEL SELECTION  
SWITCH REPEATEDLY  
BETWEEN THE LAST TWO  
CHANNELS DISPLAYED  
NEXT CHANNEL  
VOLUME INCREASE  
EXTERNAL INPUT SELECTION  
TEMPORARY SOUND SWITCH-OFF  
VOLUME DECREASE  
PREVIOUS CHANNEL  
INFORMATION DISPLAY  
EXIT FROM ANY DISPLAY  
MENU DISPLAY  
MOVE TO THE REQUIRED  
MENU OPTION/  
ADJUST AN OPTION VALUE  
RESPECTIVELY  
SOUND MENU DISPLAY  
TURBO SOUND  
CHANGE CONFIRMATION  
SOUND EFFECT SELECTION  
PICTURE EFFECT SELECTION  
STILL PICTURE  
DNIe ON/OFF/DEMO  
(depending on the model)  
The performance of the remote control may be affected by bright light.  
English-6  
Download from Www.Somanuals.com. All Manuals Search And Download.  
AA68-03336A-01Eng 6/28/04 4:08 PM Page 7  
Infrared Remote Control (continued)  
TELETEXT DISPLAY/  
MIX BOTH TELETEXT INFORMATION  
AND THE NORMAL BROADCAST  
TELETEXT SIZE SELECTION  
TELETEXT SUB-PAGE  
TELETEXT STORE  
TELETEXT PAGE HOLD  
SUB PICTURE(PIP)  
NEXT CHANNEL  
TELETEXT NEXT PAGE  
TELETEXT MODE SELECTION  
(LIST/FLOF)  
TELETEXT PREVIOUS PAGE  
TELETEXT REVEAL  
PIP ON/OFF  
P
PROGRAMME  
SELECTION BY NAME  
SUB PICTURE(PIP)  
LOCATION SELECTION  
SUB PICTURE(PIP) SIZE SELECTION  
SUB PICTURE(PIP) PREVIOUS  
CHANNEL  
P
FASTEXT TOPIC SELECTION  
INTERCHANGE THE MAIN AND SUB  
PICTURE (PIP)  
SUB PICTURE(PIP)  
SOURCE SELECTION  
W.LINK FUNCTIONS  
(depending on the model)  
English-7  
Download from Www.Somanuals.com. All Manuals Search And Download.  
AA68-03336A-01Eng 6/28/04 4:08 PM Page 8  
Inserting the Batteries in the Remote Control  
You must insert or replace the batteries in the remote control when  
you:  
Purchase the television  
Find that the remote control is no longer operating  
correctly  
1
2
Remove the cover on the rear of the remote control by pressing  
the symbol ( ) downwards and then pulling firmly to remove it.  
Insert two R03, UM4, “AAA” 1.5V or equivalent batteries taking  
care to respect the polarities:  
-
+
on the battery against  
on the battery against  
-
on the remote control  
+ on the remote control  
3
Replace the cover by aligning it with the base of the remote  
control and pressing it back into place.  
Connecting to an Aerial or Cable Television Network  
To view television channels correctly, a signal must be received by  
the set from one of the following sources:  
An outdoor aerial  
A cable television network  
A satellite network  
1
2
In the first three cases, connect the aerial or network input cable to  
the 75coaxial socket on the rear of the television.  
Rear of the TV  
If you are using an indoor aerial, you may need to turn it when  
tuning your television until you obtain a picture that is both sharp  
and clear.  
or  
For further details, refer to:  
Cable Television  
Network  
“Storing Channels Automatically ” on page 13  
“Storing Channels Manually” on page 15  
English-8  
Download from Www.Somanuals.com. All Manuals Search And Download.  
AA68-03336A-01Eng 6/28/04 4:08 PM Page 9  
Switching Your Television On and Off  
The mains lead is attached to the rear of your television.  
1
2
3
Plug the mains lead into an appropriate socket.  
The main voltage is indicated on the rear of the television  
and the frequency is 50 or 60Hz.  
Press the “ ” button (On/Off) on the front of the television.  
Result:  
The Standby indicator on the front of the television  
lights up.  
Press the POWER ( ) button on the remote control to switch the  
television on.  
Result:  
The programme that you were watching last is re-  
selected automatically.  
If you have not yet stored any channels, No clear picture  
appears. Refer to “Storing Channels Automatically” on page  
13 or “Storing Channels Manually” on page 15.  
4
To switch your television off, press the “ ” button (On/Off) again.  
Placing Your Television in Standby Mode  
Your television can be placed in Standby mode, in order to reduce:  
Power consumption  
Wear of the cathode ray tube  
The Standby mode can be useful when you wish to interrupt  
viewing temporarily (during a meal, for example).  
1
Press the POWER ( ) button on the remote control.  
Result:  
The screen is turned off and the Standby indicator on  
the front of the television lights up in red.  
2
To switch the television back on, simply press the POWER (  
button again.  
)
You can also switch on by pressing the P  
or  
button.  
Do not leave your television in Standby mode for long  
periods of time (when you are away on holiday, for  
example). Turn your television off by pressing the “  
button (On/Off) on the front of the television. It is best to  
unplug the set from the mains and aerial.  
English-9  
Download from Www.Somanuals.com. All Manuals Search And Download.  
AA68-03336A-01Eng 6/28/04 4:08 PM Page 10  
Becoming Familiar with the Remote Control  
The remote control is used mainly to:  
Change channels and adjust the volume  
Set up the television using the on-screen menu system  
The following table presents the most frequently used buttons and  
their functions.  
Button  
Viewing Function  
Menu Function  
Used to display the next  
stored channel.  
-
Used to display the previous  
stored channel.  
-
to  
Used to display the corresponding channels.  
-/--  
Used to select a channel numbered ten or over.  
Press this button, and the “--” symbol is displayed.  
Enter the two-digit channel number.  
PRE-CH  
Press the PRE-CH button. The TV will switch to the last  
channel viewed.  
To quickly switch between two channels that are far apart,  
tune to one channel, then use the number button to select  
second channel. Then, use the PRE-CH button to quickly  
alternate between them.  
Used to increase the  
volume.  
-
-
Used to decrease the  
volume.  
MUTE  
MENU  
Used to switch the sound off temporarily.  
To turn the sound back on, press this button again, or  
press the  
or  
button.  
Used to display the  
on-screen menu system.  
Used to return to the previous  
menu or normal viewing.  
-
Used to:  
Display a submenu  
containing selections for  
the current menu option  
Increase/decrease a  
menu option value  
-
-
Used to confirm your choice.  
EXIT  
TV  
Used to exit from the menu  
system and return to normal  
viewing directly.  
Used to switch the  
television on when it is  
in Standby mode.  
English-10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
AA68-03336A-01Eng 6/28/04 4:08 PM Page 11  
Plug & Play Feature  
When the television is initially powered on, three basic customer  
settings proceed automatically and subsequently: setting the  
language, channel and clock.  
Plug & Play  
1
If the television is in Standby mode, press the POWER ( ) button  
on the remote control.  
Check antenna input.  
Result:  
The message Plug & Playis displayed. It flickers for  
a little while and then Languagemenu is automatically  
displayed.  
œ √ Move  
Skip  
2
Select the appropriate language by pressing the œ or button.  
(
)
Press the MENU  
button to enter the language.  
TV  
Auto Store  
Result: The message Check antenna input. is displayed.  
Country  
Search  
œ
UK  
:-/+  
If any language is not selected on the Languagemenu, the  
Languagemenu will disappear about 30 seconds later.  
3
4
Make sure that the antenna is connected to the TV.  
Press the œ or button.  
Move  
œ √ Adjust  
Skip  
Result:  
The Auto Storemenu is displayed with Countryis  
selected.  
TV  
Time  
Select your country by pressing the œ or button. To search the  
channels, select Searchby pressing the or button, and then  
Clock  
-- : --  
: Off  
-- : -- Off  
-- : -- Off  
(
)
press the œ or button. Press the MENU  
search.  
button to stop the  
Sleep Timer  
On Timer  
Off Timer  
On Timer Volume : 10  
On Timer Channel: 1  
Result:  
The Timemenu is displayed with Clockis selected.  
Refer to “Storing Channels Automatically” on page 13.  
Move  
œ √ Adjust  
Skip  
5
6
7
Press the œ or button to move to the hour or minute. Set the  
hour or minute by pressing the or button.  
Refer to “Setting and Displaying the Current Time” on page  
31.  
Enjoy your watching.  
(
)
When you have finished, press the MENU  
button.  
Result:  
The message Enjoy your watching.is displayed,  
and then the channel which has been stored will be  
activated.  
TV  
Setup  
Plug & Play  
Language : English  
Time  
Blue Screen  
Melody  
If you want to reset this feature...  
: Off  
: On  
(
)
1
2
Press the MENU  
button.  
Demonstration  
Press the or button to select Setup, and then press the  
ENTER ( ) button.  
Move  
Enter  
Return  
Result:  
The Plug & Playis selected.  
3
Press the ENTER ( ) button again.  
Result: This feature starts with the message Plug & Play  
is displayed.  
English-11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
AA68-03336A-01Eng 6/28/04 4:08 PM Page 12  
Viewing the Demonstration  
To become familiar with the various menus provided by your  
television, you can view the inbuilt demonstration.  
(
)
1
2
Press the MENU  
button.  
Result: The main menu is displayed.  
Press the or button to select Setup.  
Result: The options available in the Setupgroup are  
displayed.  
3
4
5
Press the ENTER ( ) button.  
Press the or button to select Demonstration.  
Press the ENTER ( ) button.  
TV  
Setup  
Plug & Play  
Language : English  
Time  
Blue Screen  
Melody  
Result:  
Each of the menu options is displayed in turn.  
: Off  
: On  
When you wish to exit from the demonstration, press the  
Demonstration  
EXIT (  
) button on the remote control.  
Move  
Enter  
Return  
Choosing Your Language  
When you start using your television for the first time, you must  
select the language which will be used for displaying menus and  
indications.  
TV  
Setup  
Plug & Play  
Language  
Time  
œ
English  
(
)
1
2
Press the MENU  
button.  
Blue Screen  
Melody  
Demonstration  
: Off  
: On  
Result: The main menu is displayed.  
Press the or button to select Setup.  
Result: The options available in the Setupgroup are  
Move  
œ √ Adjust  
Return  
displayed.  
3
4
5
Press the ENTER ( ) button.  
Press the or button to select Language.  
Press the ENTER ( ) button.  
Result:  
The options available in the Languagegroup are  
displayed.  
6
7
Select the appropriate language by pressing the or button  
repeatedly.  
When you have finished, press the EXIT (  
) button to exit.  
English-12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
AA68-03336A-01Eng 6/28/04 4:08 PM Page 13  
Storing Channels Automatically  
You can scan for the frequency ranges available to you (and  
availability depends on your country). Automatically allocated  
programme numbers may not correspond to actual or desired  
programme numbers. However you can sort numbers manually and  
clear any channels you do not wish to watch.  
TV  
TV  
TV  
Channel  
Auto Store  
Manual Store  
Add/Delete  
Sort  
Name  
(
)
1
2
Press the MENU  
button.  
More  
Result: The main menu is displayed.  
Move  
Enter  
Return  
Press the or button to select Channel.  
Result: The options available in the Channelgroup are  
Auto Store  
displayed.  
Country  
Search  
œ
UK  
:-/+  
3
4
Press the ENTER ( ) button.  
Result:  
The Auto Storeis selected.  
Press the ENTER ( ) button again.  
Result:  
The options available in the Auto Storegroup are  
displayed with Countryis selected.  
Move  
œ √ Adjust  
Return  
5
Select your country by pressing the œ or button. The areas are  
Auto Store  
displayed in the following order: Others  
Deutschland España France Italia  
Schweiz Sverige UK Eastern Europe.  
-
Belgie  
-
-
-
-
-
Nederland  
-
Country  
Search  
: UK  
œ
-/+  
-
-
-
6
7
Press the or button to select Search.  
Press the œ or button to start the search.  
Move  
œ √ Search  
Return  
Result:  
The horizontal bar is displayed, and then channels are  
stored in an order which reflects their positions in the  
frequency range. Finally, the search will end  
automatically.  
To stop the search before it has finished, press the MENU  
(
)
button.  
8
When searching and storing are complete, the Sortmenu is  
displayed.  
P 1 C-- ----  
106 MHz  
7 %  
To sort the stored channels into the desired numerical order,  
go to Step 6 of the “Sorting the Stored Channels” procedure  
on page 14.  
Return  
To exit from the channel store function without sorting the  
TV  
Sort  
(
)
channels, press the MENU  
button repeatedly until the  
From  
To  
Store  
œ
P 1 -----  
menus disappear.  
: P-- -----  
: ?  
9
When the channels have been stored, you can:  
Sort them in the order required (refer to page 14)  
Skip Unwanted Channels (refer to page 17)  
Assign a name to the stored channels (refer to page 18)  
Fine tune channel reception if necessary (refer to page 19)  
Activate the Digital Noise Reduction feature (refer to page 24)  
Move  
œ √ Adjust  
Return  
English-13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
AA68-03336A-01Eng 6/28/04 4:08 PM Page 14  
Sorting the Stored Channels  
This operation allows you to change the programme numbers of  
stored channels. This operation may be necessary after using auto  
store. You can delete the channels you do not want to keep.  
TV  
TV  
TV  
TV  
Channel  
Auto Store  
Manual Store  
Add/Delete  
Sort  
(
)
1
2
Press the MENU  
button.  
Name  
Result: The main menu is displayed.  
More  
Press the or button to select Channel.  
Result: The options available in the Channelgroup are  
Move  
Enter  
Return  
displayed.  
Sort  
3
4
5
Press the ENTER ( ) button.  
Press the or button to select Sort.  
Press the ENTER ( ) button.  
From  
To  
Store  
œ
P 1 -----  
: P-- -----  
: ?  
Result:  
The options available in the Sortgroup are displayed  
with Fromis selected.  
Move  
œ √ Adjust  
Return  
Sort  
6
7
Select the channel number that you wish to change by pressing  
the œ or button repeatedly.  
Press the or button to select To. Select the new channel  
number which you wish to identify by pressing the œ or button  
repeatedly.  
From  
To  
Store  
: P 1 -----  
P 2 -----  
: ?  
œ
You can also select the channel number directly by pressing  
the numeric buttons (0~9).  
8
9
Press the or button to select Store. Select OK to confirm the  
Move  
œ √ Adjust  
Return  
Sort  
exchange of channel numbers by pressing the œ or button.  
Result:  
The selected channel is exchanged with the one  
previously stored to the chosen number.  
From  
To  
Store  
: P 1 -----  
: P 2 -----  
For all the channels to move to the required channel numbers,  
repeat steps 6 to 8 after selecting the Fromby pressing the or ▲  
button.  
œ
OK  
10 When you have finished, press the EXIT (  
) button to exit.  
Move  
œ √ Adjust  
Return  
English-14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
AA68-03336A-01Eng 6/28/04 4:08 PM Page 15  
Storing Channels Manually  
You can store up to 100 television channels, including those  
received via cable networks.  
TV  
TV  
TV  
TV  
Channel  
Auto Store  
Manual Store  
Add/Delete  
Sort  
When storing channels manually, you can choose:  
Whether or not to store each of the channels found  
The programme number of each stored channel which  
Name  
you wish to identify  
More  
Move  
Enter  
Return  
(
)
1
2
Press the MENU  
button.  
Result: The main menu is displayed.  
Manual Store  
Press the or button to select Channel.  
Result: The options available in the Channelgroup are  
Programme  
Colour System  
Sound System  
Search  
Channel  
Store  
œ
P 1 -----  
: AUTO  
: DK  
displayed.  
: 0MHz  
: C--  
: ?  
3
4
5
Press the ENTER ( ) button.  
Press the or button to select Manual Store.  
Press the ENTER ( ) button.  
Move  
œ √ Adjust  
Return  
Manual Store  
: P 1 -----  
Result:  
The options available in the Manual Storegroup are  
displayed with Programmeis selected.  
Programme  
Colour System  
Sound System  
Search  
Channel  
Store  
œ
AUTO  
6
7
To assign a programme number to a channel, press the œ or √  
button.  
: DK  
: 0MHz  
: C--  
: ?  
Press the or button to select Colour System. Indicate the  
broadcasting standard required by pressing the œ or button  
repeatedly.  
Move  
œ √ Adjust  
Return  
Result:  
The colour standards are displayed in the following  
order:  
Manual Store  
AUTO  
-
PAL  
-
SECAM  
-
NT4.43.  
Programme  
: P 1 -----  
: AUTO  
Colour System  
Sound System  
Search  
Channel  
Store  
8
Press the or button to select Sound System. Select the  
sound standard required by pressing the œ or button repeatedly.  
œ
DK  
: 0MHz  
: C--  
: ?  
Result:  
The sound standards are displayed in the following  
order:  
BG  
-
DK  
-
I
-
L.  
Move  
œ √ Adjust  
Return  
English-15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
AA68-03336A-01Eng 6/28/04 4:08 PM Page 16  
Storing Channels Manually (continued)  
9
If you know the number of the channel to be stored, see the  
following steps.  
TV  
TV  
TV  
Manual Store  
Programme  
Colour System  
Sound System  
Search  
Channel  
Store  
: P 1 -----  
: AUTO  
Press the or button to select Channel.  
: DK  
Press the button.  
: 0MHz  
Press the or button to select C(Air channel) or S(Cable  
channel).  
œ
C 1  
: ?  
Press the button.  
Adjust  
œ √ Move  
Return  
Press the or button to select indicate the required  
number.  
Manual Store  
You can also select the channel number directly by  
pressing the numeric buttons (0~9).  
Programme  
: P 1 -----  
: AUTO  
Colour System  
Sound System  
Search  
Channel  
Store  
If no sound or abnormal sound, re-select the sound system  
required.  
: DK  
œ
46MHz√  
: C 1  
: ?  
10 If you do not know the channel numbers, select Searchby  
pressing the or button. Press the œ or button to start the  
search.  
Move  
œ √ Search  
Return  
Result:  
The tuner scans the frequency range until the first  
channel or the channel that you selected is received  
on your screen.  
Manual Store  
Programme  
: P 1 -----  
: AUTO  
11 To store the channel and associated programme number, select  
Storeby pressing the or button. Press the œ or button to  
select OK.  
Colour System  
Sound System  
Search  
: DK  
: 46MHz  
: C 1  
Channel  
Store  
œ
OK  
12 Repeat Steps 9 to 11 for each channel to be stored.  
Move  
œ √ Adjust  
Return  
13 When you have finished, press the EXIT (  
) button to exit.  
Channel mode  
P (Programme mode): When completing tuning, the  
broadcasting stations in your area have been assigned to  
position numbers from P00 to max P99. You can select a  
channel by entering the position number in this mode.  
C (Real channel mode): You can select a channel by  
entering the assigned number to each air broadcasting station  
in this mode.  
S (Cable channel mode): You can select a channel by  
entering the assigned number for each cable channel in this  
mode.  
English-16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
AA68-03336A-01Eng 6/28/04 4:08 PM Page 17  
Skipping Unwanted Channels  
You can exclude the channels you chosen from the channels you  
scanned. When you scan through the stored channels, those you  
have chosen to skip are not displayed.  
TV  
TV  
TV  
Channel  
Auto Store  
Manual Store  
Add/Delete  
Sort  
All of the channels that you do not specifically choose to skip are  
displayed during scanning.  
Name  
More  
(
)
1
2
Press the MENU  
button.  
Move  
Enter  
Return  
Result: The main menu is displayed.  
Press the or button to select Channel.  
Result: The options available in the Channelgroup are  
Add/Delete  
P 1  
P 2  
P 3  
P 4  
œ
Added  
displayed.  
: Added  
: Added  
: Added  
3
4
5
Press the ENTER ( ) button.  
Press the or button to select Add/Delete.  
Press the ENTER ( ) button.  
Move  
œ √ Adjust  
Return  
Result:  
The stored channels are displayed.  
6
Press the or button to select the channel to add or erase.  
If necessary, select Addedor Deletedby pressing the œ or √  
button.  
Add/Delete  
P 1  
P 2  
P 3  
P 4  
œ
Deleted  
: Added  
: Added  
: Added  
7
8
Repeat Step 6 for each channel to be added or erased.  
When you have finished, press the EXIT (  
) button to exit.  
Move  
œ √ Adjust  
Return  
English-17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
AA68-03336A-01Eng 6/28/04 4:08 PM Page 18  
Assigning Names to Channels  
Channel names will be assigned automatically when channel  
information is broadcast. These names can be changed, allowing  
you to assign new names.  
TV  
TV  
TV  
Channel  
Auto Store  
Manual Store  
Add/Delete  
Sort  
(
)
1
2
Press the MENU  
button.  
Name  
Result: The main menu is displayed.  
More  
Press the or button to select Channel.  
Result: The options available in the Channelgroup are  
Move  
Enter  
Return  
displayed.  
Name  
3
4
5
Press the ENTER ( ) button.  
Press the or button to select Name.  
Press the ENTER ( ) button.  
P 1  
P 2  
P 3  
P 4  
œ
-----  
: -----  
: -----  
: -----  
Result:  
The current channels are displayed.  
Move  
œ √ Adjust  
Return  
6
If necessary, select the channel to be assigned to a new name by  
pressing the or button.  
7
8
Press the ENTER ( ) button.  
Name  
P 1  
P 2  
P 3  
P 4  
œ
A
Press the or button to select a letter (A~Z), a number (0~9) or  
: -----  
: -----  
: -----  
a symbol (-, space). Move on the previous or next letter by  
pressing the œ or button.  
9
Repeat Steps  
name.  
6
to  
8
for each channel to be assigned to a new  
Adjust  
œ √ Move  
Return  
10 When you have finished, press the EXIT (  
) button to exit.  
English-18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
AA68-03336A-01Eng 6/28/04 4:08 PM Page 19  
Fine Tuning Channel Reception  
If the reception is clear, you do not have to fine tune the channel,  
as this is done automatically during the search and store operation.  
If the signal is weak or distorted, you may have to fine tune the  
channel manually.  
TV  
Channel  
More  
Fine Tune  
LNA  
: Off  
(
)
1
2
Press the MENU  
button.  
Result: The main menu is displayed.  
Press the or button to select Channel.  
Result: The options available in the Channelgroup are  
Move  
Enter  
Return  
displayed.  
3
4
5
6
Press the ENTER ( ) button.  
Fine Tune  
Reset  
P 1  
1
Press the or button to select Fine Tune.  
Press the ENTER ( ) button.  
Move  
œ √ Adjust  
Save  
Return  
To obtain a sharp and clear picture and good sound quality, press  
the œ or button.  
Result:  
The horizontal bar is displayed. Move the horizontal  
bar’s cursor left or right by pressing the œ or button.  
7
8
9
To store the fine tuning setting in the TV’s memory, press the  
ENTER ( ) button.  
Result:  
Channel indicator turns into Red.  
To erase adjusted picture or sound, select Reset by pressing the  
or button. Press the ENTER ( ) button.  
Result:  
Channel indicator returns to its original colour.  
) button to exit.  
When you have finished, press the EXIT (  
English-19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
AA68-03336A-01Eng 6/28/04 4:08 PM Page 20  
Using the LNA (Low Noise Amplifier) feature (depending on the model)  
This function is very useful in the situation that the TV is used in  
weak signal. LNA amplifies the TV signal in the weak signal area,  
but not noise. This feature is working only weak signal condition,  
and that is memorized on current channel, additional.  
TV  
Channel  
More  
Fine Tune  
LNA  
œ
On  
(
)
1
2
Press the MENU  
button.  
Result: The main menu is displayed.  
Move  
œ √ Adjust  
Return  
Press the or button to select Channel.  
Result: The options available in the Channelgroup are  
displayed.  
3
4
5
6
Press the ENTER ( ) button.  
Press the or button to select LNA.  
To activate this feature, select On by pressing the œ or button.  
When you have finished, press the EXIT (  
) button to exit.  
Setting the LNA option to “On” may produce worse picture  
quality due to the current channel’s signal condition.  
Hence, apply LNA On/Off selectively according to the  
picture quality that is currently displayed.  
English-20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
AA68-03336A-01Eng 6/28/04 4:08 PM Page 21  
Changing the Picture Standard  
You can select the type of picture which best corresponds to your  
viewing requirements.  
TV  
Picture  
Mode  
Custom  
œ
Dynamic  
(
)
1
2
Press the MENU  
button.  
Colour Tone : Normal  
Result: The main menu is displayed.  
Size  
Digital NR  
: Normal  
: On  
More  
Press the or button to select Picture.  
Result: The options available in the Picturegroup are  
Move  
œ √ Adjust  
Return  
displayed.  
3
4
Press the ENTER ( ) button.  
Result: The Modeis selected.  
Select the required picture effect by pressing the œ or button  
repeatedly.  
Result:  
The following picture effects are available:  
Dynamic  
-
Standard  
-
Movie  
-
Custom.  
5
When you have finished, press the EXIT (  
) button to exit.  
You can also set these options simply by pressing the  
P.MODE  
(
)
(Picture Mode) button.  
English-21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
AA68-03336A-01Eng 6/28/04 4:08 PM Page 22  
Adjusting the Picture Settings  
Your television has several settings which allow you to control  
picture quality.  
TV  
Picture  
: Dynamic  
Mode  
Custom  
Colour Tone : Normal  
Size  
Digital NR  
(
)
1
2
Press the MENU  
button.  
Result: The main menu is displayed.  
: Normal  
: On  
More  
Press the or button to select Picture.  
Result: The options available in the Picturegroup are  
Move  
Enter  
Return  
displayed.  
3
4
5
Press the ENTER ( ) button.  
TV  
Custom  
Press the or button to select Custom.  
Press the ENTER ( ) button.  
Contrast  
œ
:
:
:
90  
50  
60  
50  
Brightness  
Sharpness  
Colour  
Result:  
The options available in the Customgroup are  
displayed.  
6
7
Press the or button to select the option (Contrast,  
Brightness, Sharpness, Colouror Tint-NTSC only) to be  
adjusted. Press the œ or button.  
Move  
œ √ Adjust  
Return  
90  
Contrast  
Result:  
The horizontal bar is displayed. Move the horizontal  
bar’s cursor left or right by pressing the œ or √  
button.  
When you have finished, press the EXIT (  
) button to exit.  
If you make any changes to these settings, the picture  
standard is automatically switched to Custom.  
The television has an “automatic degaussing” system  
that is activated if magnetic interference is present.  
To degauss the television screen, switch power off by  
pressing the “ ” (On/Off) button on the front panel.  
(Refer to “Automatic Degaussing to Remove Colour  
Patches” on page 45.)  
English-22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
AA68-03336A-01Eng 6/28/04 4:08 PM Page 23  
Selecting the Colour Tone  
(
)
1
2
Press the MENU  
button.  
TV  
Picture  
: Dynamic  
Result: The main menu is displayed.  
Mode  
Custom  
Colour Tone  
Size  
Digital NR  
Press the or button to select Picture.  
Result: The options available in the Picturegroup are  
œ
Normal  
: Normal  
: On  
displayed.  
More  
3
4
5
Press the ENTER ( ) button.  
Move  
œ √ Adjust  
Return  
Press the or button to select Colour Tone.  
Press the œ or button.  
Colour Tone  
Normal  
Result:  
The horizontal bar is displayed. Move the horizontal  
bar’s cursor left or right by pressing the œ or √  
button. ( Warm1 ~ Warm10 - Normal - Cool1 ~  
Cool10).  
6
When you have finished, press the EXIT (  
) button to exit.  
English-23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
AA68-03336A-01Eng 6/28/04 4:08 PM Page 24  
Selecting the Picture Size  
You can select the picture size which best corresponds to your  
viewing requirements simply by pressing the “P.SIZE ” button.  
Depending on the model, the following picture sizes are available:  
(
)
TV  
Picture  
: Dynamic  
Mode  
Custom  
Normal, Zoom1, Zoom2, 16:9  
Colour Tone : Normal  
Size  
œ
Normal  
: On  
(
)
1
2
Press the MENU  
button.  
Digital NR  
Result: The main menu is displayed.  
More  
Press the or button to select Picture.  
Result: The options available in the Picturegroup are  
Move  
œ √ Adjust  
Return  
displayed.  
3
4
5
Press the ENTER ( ) button.  
Press the or button to select Size.  
Press the œ or button to select the picture size (Norma1,  
Zoom1, Zoom2or 16:9).  
6
When you have finished, press the EXIT (  
) button to exit.  
Selecting the Digital NR  
If the signal received by your television is weak, you can activate  
this feature to reduce any static and ghosting that may appear on  
the screen.  
TV  
Picture  
: Dynamic  
Mode  
Custom  
Colour Tone : Normal  
Size  
Digital NR  
(
)
1
2
Press the MENU  
button.  
: Normal  
Result: The main menu is displayed.  
œ
On  
More  
Press the or button to select Picture.  
Result: The options available in the Picturegroup are  
Move  
œ √ Adjust  
Return  
displayed.  
3
4
5
6
Press the ENTER ( ) button.  
Press the or button to select Digital NR.  
To activate this feature, select On by pressing the œ or button.  
When you have finished, press the EXIT (  
) button to exit.  
English-24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
AA68-03336A-01Eng 6/28/04 4:08 PM Page 25  
Using the Tilt Control Feature  
If you find that the picture received is slightly tilted to one side, you  
can adjust the tilt setting.  
TV  
Picture  
More  
Tilt  
PIP  
œ
3
(
)
1
2
Press the MENU  
button.  
Result: The main menu is displayed.  
Press the or button to select Picture.  
Result: The options available in the Picturegroup are  
Move  
œ √ Adjust  
Return  
displayed.  
3
4
5
6
Press the ENTER ( ) button.  
Press the or button to select Tilt.  
Press the œ or button to reach the required setting (-7 to +7).  
When you have finished, press the EXIT (  
) button to exit.  
Setting the Blue Screen  
If no signal is being received or the signal is very weak, a blue  
screen automatically replaces the noisy picture background.  
TV  
Setup  
If you wish to continue viewing the poor picture, you must set the  
“Blue Screen” mode to “Off”.  
Plug & Play  
Language : English  
Time  
Blue Screen  
Melody  
œ
On  
: On  
(
)
1
2
Press the MENU  
button.  
Demonstration  
Result: The main menu is displayed.  
Move  
œ √ Adjust  
Return  
Press the or button to select Setup.  
Result: The options available in the Setupgroup are  
displayed.  
3
4
5
6
Press the ENTER ( ) button.  
Press the or button to select Blue Screen.  
To activate this feature, select On by pressing the œ or button.  
When you have finished, press the EXIT (  
) button to exit.  
English-25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
AA68-03336A-01Eng 6/28/04 4:08 PM Page 26  
Freezing the Current Picture  
You can freeze the picture when watching a television programme  
simply by pressing the “STILL ” button.  
(
)
To return to normal viewing, press this button again.  
Changing the Sound Standard  
You can select the type of special sound effect to be used when  
watching a given broadcast.  
TV  
Sound  
Mode  
Equalizer  
œ
Custom  
(
)
1
2
Press the MENU  
button.  
Auto Volume  
Dolby Virtual  
Turbo Sound  
Pseudo Stereo  
: Off  
: Off  
: Off  
: Off  
Result: The main menu is displayed.  
Press the or button to select Sound.  
Result: The options available in the Soundgroup are  
Move  
œ √ Adjust  
Return  
displayed.  
3
4
Press the ENTER ( ) button.  
Result: The Modeis selected.  
Select the required sound effect by pressing the œ or button  
repeatedly.  
Result:  
The following sound effects are available:  
Standard Music Movie Speech(SVE)  
SVE : SAMSUNG Voice Enhancement Technic  
-
-
-
-
Custom.  
5
When you have finished, press the EXIT (  
) button to exit.  
You can also set these options simply by pressing the  
S.MODE  
(
)
(Sound Mode) button.  
English-26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
AA68-03336A-01Eng 6/28/04 4:08 PM Page 27  
Adjusting the Sound Settings  
The sound settings can be adjusted to suit your personal preferences.  
TV  
Sound  
: Custom  
(
)
1
2
Press the MENU  
button.  
Mode  
Equalizer  
Result: The main menu is displayed.  
Auto Volume  
Dolby Virtual  
Turbo Sound  
Pseudo Stereo  
: Off  
: Off  
: Off  
: Off  
Press the or button to select Sound.  
Result: The options available in the Sound. group are  
displayed.  
Move  
Enter  
Return  
3
4
5
Press the ENTER ( ) button.  
TV  
Equalizer  
Press the or button to select Equalizer.  
Press the ENTER ( ) button.  
R
L
Result:  
The options available in the Equalizergroup are  
displayed.  
100 300 1K  
3K 10K  
You can also display this group simply by pressing the  
S.MENU (Sound Menu) button.  
Adjust  
œ √ Move  
Return  
6
7
Select the option to be adjusted by pressing the œ or button.  
Press the or button to reach the required setting.  
When you have finished, press the EXIT (  
) button to exit.  
If you make any changes to these settings, the sound  
standard is automatically switched to Custom.  
English-27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
AA68-03336A-01Eng 6/28/04 4:08 PM Page 28  
Extra Sound Settings (depending on the model)  
Auto Volume  
Each broadcasting station has its own signal conditions, and  
so it is not easy for you to adjust the volume every time the  
channel is changed. This feature lets you automatically  
adjust the volume of the desired channel by lowering the  
sound output when the modulation signal is high or by  
raising the sound output when the modulation signal is low.  
TV  
TV  
TV  
TV  
Sound  
: Custom  
Mode  
Equalizer  
Auto Volume  
Dolby Virtual  
Turbo Sound  
Pseudo Stereo  
œ
On  
: Off  
: Off  
: Off  
Move  
œ √ Adjust  
Return  
Turbo Sound  
This feature suitably emphasizes both higher and lower  
bands of sound (and includes other effects).  
Sound  
You can enjoy more magnificent and dynamic sound when  
watching music, movie, or other channel simply by pressing  
the TURBO button.  
Mode  
Equalizer  
Auto Volume  
Dolby Virtual  
Turbo Sound  
Pseudo Stereo  
: Custom  
: Off  
On  
œ
: Off  
: Off  
Pseudo Stereo / Dolby Virtual  
Pseudo stereofeature converts a monaural sound signal  
into two identical left and right channels.  
Move  
œ √ Adjust  
Return  
Once the Pseudo Stereoor Dolby Virtual is set to On  
or Off, these settings apply to the sound effects such as  
Standard, Music, Movie, and Speech(SVE).  
Sound  
Mode  
Equalizer  
Auto Volume  
Dolby Virtual  
Turbo Sound  
Pseudo Stereo  
: Custom  
: Off  
: Off  
œ
On  
: Off  
(
)
1
2
Press the MENU  
button.  
Result: The main menu is displayed.  
Move  
œ √ Adjust  
Return  
Sound  
Press the or button to select Sound.  
Result: The options available in the Soundgroup are  
displayed.  
Mode  
Equalizer  
Auto Volume  
Dolby Virtual  
Turbo Sound  
Pseudo Stereo  
: Custom  
3
4
Press the ENTER ( ) button.  
: Off  
: Off  
: Off  
Select the required option (Auto Volume, Dolby Virtual  
Turbo Sound or Pseudo Stereo) by pressing the or ▲  
button.  
,
œ
On  
Move  
œ √ Adjust  
Return  
5
6
To activate each feature, select On by pressing the œ or button.  
When you have finished, press the EXIT (  
) button to exit.  
Manufactured under license from  
Dolby Laboratories.  
“Dolby” and the double-D symbol  
are trademarks of Dolby  
Laboratories.  
English-28  
Download from Www.Somanuals.com. All Manuals Search And Download.  
AA68-03336A-01Eng 6/28/04 4:08 PM Page 29  
Selecting the Sound Mode (depending on the model)  
The “DUAL I-II” button displays/controls the processing and output  
of the audio signal. When power is switched on, the mode is  
automatically preset to either “DUAL-I ” or “STEREO”, depending on  
the current transmission.  
Type of broadcast  
On-screen indication  
Regular broadcast  
(Standard audio)  
MONO (Normal use)  
Regular +  
NICAM Mono  
MONO  
NICAM  
MONO  
(Normal)  
NICAM  
Stereo  
STEREO MONO  
NICAM (Normal)  
NICAM Stereo  
DUAL-  
I
DUAL-II Mono  
NICAM  
NICAM (Normal)  
NICAM Dual-I/II  
Regular broadcast  
(Standard audio)  
MONO (Normal use)  
A2  
Stereo  
Bilingual or Dual-I/II  
DUAL- DUAL-II  
I
STEREO MONO  
(Forced mono)  
Stereo  
If the receiving conditions deteriorate, listening will be  
easier if the mode is set to the MONO.  
If the stereo signal is weak and an automatic switching  
occurs, then switch to the MONO.  
When receiving a mono sound in the AV mode, connect  
to the “AUDIO-L” input connector on the panel (front or  
side). If the mono sound comes out only from left  
speaker, press the DUAL I-II button.  
English-29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
AA68-03336A-01Eng 6/28/04 4:08 PM Page 30  
Selecting the Melody  
You can hear clear melody sound when the television is powered on  
or off.  
TV  
Setup  
Plug & Play  
Language : English  
Time  
(
)
1
Press the MENU  
button.  
Result: The main menu is displayed.  
Blue Screen  
Melody  
Demonstration  
: Off  
On  
œ
2
Press the or button to select Setup.  
Result: The options available in the Setupgroup are  
Move  
œ √ Adjust  
Return  
displayed.  
3
4
5
6
Press the ENTER ( ) button.  
Press the or button to select Melody.  
To activate this feature, select On by pressing the œ or button.  
When you have finished, press the EXIT (  
) button to exit.  
English-30  
Download from Www.Somanuals.com. All Manuals Search And Download.  
AA68-03336A-01Eng 6/28/04 4:08 PM Page 31  
Setting and Displaying the Current Time  
You can set the television’s clock so that the current time is displayed  
by pressing the “INFO  
you wish to use the automatic on or off timers.  
(
)” button. You must also set the time if  
TV  
TV  
TV  
Setup  
Plug & Play  
Language : English  
Time  
Blue Screen  
Melody  
When pressing the “ ” button (On/Off) on the front of  
the television, the clock setting will be reset.  
: Off  
: On  
Demonstration  
(
)
1
2
Press the MENU  
button.  
Move  
Enter  
Return  
Time  
Result: The main menu is displayed.  
Press the or button to select Setup.  
Result: The options available in the Setupgroup are  
Clock  
Sleep Timer  
On Timer  
-- : --  
displayed.  
: Off  
-- : -- Off  
-- : -- Off  
3
4
5
Press the ENTER ( ) button.  
Press the or button to select Time.  
Press the ENTER ( ) button.  
Off Timer  
On Timer Volume : 10  
On Timer Channel: 1  
Move  
œ √ Adjust  
Return  
Time  
Result:  
The Clockis selected.  
6
Press the ¦¤or button to move to the hour or minute. Set the  
hour or minute by pressing the or button.  
Clock  
13 : 00  
Sleep Timer  
On Timer  
Off Timer  
On Timer Volume : 10  
On Timer Channel: 1  
: Off  
-- : -- Off  
-- : -- Off  
7
8
When you have finished, press the EXIT (  
) button to exit.  
Press the INFO ( ) button to display the channel information and  
the current time.  
Adjust  
œ √ Move  
Return  
English-31  
Download from Www.Somanuals.com. All Manuals Search And Download.  
AA68-03336A-01Eng 6/28/04 4:08 PM Page 32  
Setting the Sleep Timer  
You can set your TV to automatically turn off after a preset  
interval.  
TV  
Setup  
Plug & Play  
Language : English  
Time  
(
)
1
2
Press the MENU  
button.  
Result: The main menu is displayed.  
Blue Screen  
Melody  
Demonstration  
: Off  
: On  
Press the or button to select Setup.  
Result: The options available in the Setupgroup are  
Move  
Enter  
Return  
Time  
displayed.  
3
4
5
Press the ENTER ( ) button.  
Press the or button to select Time.  
Press the ENTER ( ) button.  
TV  
Clock  
Sleep Timer  
On Timer  
Off Timer  
On Timer Volume : 10  
On Timer Channel: 1  
13 : 00  
30  
-- : -- Off  
-- : -- Off  
œ
Result:  
The Clockis selected.  
6
7
Press the or button to select Sleep Timer.  
Move  
œ √ Adjust  
Return  
Select the preset time interval (Off, 30, 60, 90, 120, 150, 180) for  
staying on by pressing the ¦¤or button.  
8
When you have finished, press the EXIT (  
) button to exit.  
You can select a time period of between 30 and 180 minutes  
after the television automatically switches to Standby mode  
by pressing the SLEEP ( ) button.  
English-32  
Download from Www.Somanuals.com. All Manuals Search And Download.  
AA68-03336A-01Eng 6/28/04 4:08 PM Page 33  
Switching the Television On and Off Automatically  
You can set the On/Off timers so that the television will:  
Switch on automatically and tune to the channel of your  
TV  
TV  
TV  
Setup  
choice at the time you select  
Plug & Play  
Language : English  
Time  
Blue Screen  
Melody  
Switch off automatically at the time you select  
: Off  
: On  
The first step is to set the television’s clock (refer to  
“Setting and Displaying the Current Time” on the page  
31). If you have not yet set the clock, the message Set  
the clock firstis displayed.  
Demonstration  
Move  
Enter  
Return  
Time  
(
)
1
2
Press the MENU  
button.  
Clock  
Sleep Timer  
On Timer  
13 : 00  
Result: The main menu is displayed.  
: Off  
06 : 30 On  
-- : -- Off  
Press the or button to select Setup.  
Result: The options available in the Setupgroup are  
Off Timer  
On Timer Volume : 10  
On Timer Channel: 1  
displayed.  
Adjust  
œ √ Move  
Return  
Time  
3
4
5
Press the ENTER ( ) button.  
Press the or button to select Time.  
Press the ENTER ( ) button.  
Clock  
13 : 00  
Sleep Timer  
On Timer  
Off Timer  
On Timer Volume : 10  
On Timer Channel: 1  
: Off  
06 : 30 On  
23 : 30 On  
Result:  
The Clockis selected.  
6
Press the or button to select On Timer. Set the time at which  
you wish the television to be switched on automatically.  
Press the ¦¤or button to move to the hour or minute.  
Adjust  
œ √ Move  
Return  
Set these by pressing the or button.  
Press the ¦¤or button to move Offand then, press the  
or button to select On.  
7
8
Press the or button to select Off Timer. In the same above,  
set the time at which you wish the television to be switched off  
automatically.  
When you have finished, press the EXIT (  
) button to exit.  
Absent Power Off  
When you set the timer “On”, your television will  
eventually be turned off, if you do not operate any controls  
during the 3 hours after the TV is turned on by timer.  
This function is available in only the timer “On” mode and  
will prevent a leakage accident or overheating, caused by  
your TV left on for a long time due to the timer “On”  
(when you are away on holiday, for example).  
English-33  
Download from Www.Somanuals.com. All Manuals Search And Download.  
AA68-03336A-01Eng 6/28/04 4:08 PM Page 34  
Setting the Preferred Volume Level/Channel  
The preferred volume and channel can be set for when the timer  
automatically turns on the TV.  
TV  
Setup  
Plug & Play  
Language : English  
Time  
(
)
1
2
Press the MENU  
button.  
Result: The main menu is displayed.  
Blue Screen  
Melody  
Demonstration  
: Off  
: On  
Press the or button to select Setup.  
Result: The options available in the Setupgroup are  
Move  
Enter  
Return  
Time  
displayed.  
3
4
5
Press the ENTER ( ) button.  
Press the or button to select Time  
Press the ENTER ( ) button.  
TV  
Clock  
Sleep Timer  
On Timer  
Off Timer  
On Timer Volume  
13 : 00  
: Off  
06 : 30 On  
23 : 30 On  
Result:  
The Clockis selected.  
œ
10  
On Timer Channel: 1  
6
7
8
9
Press the or button to select On Timer Volume.  
Press the ¦¤or button to adjust volume level.  
Press the or button to select On Timer Channel.  
Press the ¦¤or button to selsct the channel.  
Move  
œ √ Adjust  
Return  
10 When you have finished, press the EXIT ( ) button.  
English-34  
Download from Www.Somanuals.com. All Manuals Search And Download.  
AA68-03336A-01Eng 6/28/04 4:08 PM Page 35  
Viewing an External Signal Source/Edit Name (depending on the model)  
Use the remote control to switch between viewing signal from  
connected equipment, such as VCR, DVD, Set-Top-boxes and the  
TV source (broadcast or cable)  
TV  
Input  
Source List  
Edit Name  
: TV  
(
)
1
2
Press the MENU  
button.  
Result: The main menu is displayed.  
Press the ENTER ( ) button to select Input.  
Move  
Enter  
Return  
Result:  
The options available in the Inputgroup are  
displayed.  
TV  
TV  
TV  
TV  
Source List  
TV  
EXT1  
EXT2  
3
4
Press the ENTER ( ) button again to select Source List.  
: ------  
: ------  
Result:  
The options available in the Source Listgroup are  
displayed.  
EXT3/S-Video : ------  
Press the or button to select signal source, then press the  
ENTER ( ) button.  
Move  
Enter  
Return  
Input  
When you connect equipment to the TV, you can choose  
between the following sets of jacks : EXT1or EXT2on the  
TV’s rear panel, and EXT3/S-Videoon the TV’s side panel.  
Source List  
Edit Name  
: TV  
You can also set these options simply by pressing the  
SOURCE (  
)
button. If you change the external  
source while viewing, pictures might take a short period of  
time to be switched.  
Move  
Enter  
Return  
Edit Name  
Edit Name  
(
)
1
Press the MENU  
button.  
EXT1  
EXT2  
EXT3  
S-Video  
œ
------  
Result: The main menu is displayed.  
: ------  
: ------  
: ------  
2
Press the ENTER ( ) button to select Input.  
Result:  
The options available in the Inputgroup are  
displayed.  
Move  
œ √ Adjust  
Return  
3
4
Press the or button to select Edit Name. Press the ENTER  
) button.  
(
Edit Name  
Result:  
The options available in the Edit Namegroup are  
displayed.  
EXT1  
EXT2  
EXT3  
S-Video  
œ
DVD  
: ------  
: ------  
: ------  
Press the or button to select external device :  
EXT1 EXT2 EXT3 S-Video.  
-
-
-
5
6
7
Press the ENTER ( ) button.  
Move  
œ √ Adjust  
Return  
Select the name by pressing the ¦¤or button.  
Set other signal sources (EXT1, EXT2, EXT3, S-Video) using the  
same method as listed above.  
8
When you have finished, press the EXIT (  
) button to exit.  
English-35  
Download from Www.Somanuals.com. All Manuals Search And Download.  
AA68-03336A-01Eng 6/28/04 4:08 PM Page 36  
Viewing the Picture In Picture (PIP) (depending on the model)  
You can display a sub picture within the main picture of TV program  
or external A/V devices such as VCR or DVD. In this way you can  
watch TV program or monitor the video input from any connected  
devices while watching TV or other video input.  
TV  
TV  
TV  
TV  
Picture  
More  
Tilt  
PIP  
: 0  
(
)
1
2
Press the MENU  
button.  
Result: The main menu is displayed.  
Move  
Enter  
Return  
PIP  
Press the or button to select Picture.  
Result: The options available in the Picturegroup are  
displayed.  
PIP  
œ
Off  
3
4
Press the ENTER ( ) button.  
Press the or button to select PIP. Press the ENTER (  
button.  
)
5
Press the ¦¤or button to On.  
Move  
œ √ Adjust  
Return  
PIP  
Result:  
The options available in the PIPgroup are displayed.  
You can also activate the PIP simply by pressing the PIP  
button. To deactivate, press it again.  
6
7
Press the or button to select Source.  
PIP  
:On  
œ
Source  
Swap  
Size  
Position  
Programme  
TV  
Press the ¦¤or button to select a source of sub picture.  
: Large  
:
: P 1  
Result:  
The sources are displayed in the following order:  
TV EXT1 EXT2 EXT3/S-Video  
-
-
-
In some PIP TV models, the PIP function will not operate if  
the same source to the main picture is selected for the sub-  
picture. When a TV channel is viewed on the main picture,  
PIP is not available for TV channels. If a TV source is  
selected, the message "Not available" will appear on the  
screen. The PIP picture can be viewed only when a source  
different from the main picture's is selected in the PIP  
window.  
Move  
œ √ Adjust  
Return  
PIP  
PIP  
Source  
Swap  
Size  
Position  
Programme  
:On  
:TV  
: Large  
:
: P 2  
8
9
Press the or button to select Swap.  
Press the ENTER ( ) button.  
Move  
Enter  
Return  
Result:  
The main picture and the sub picture are  
interchanged.  
You can also interchange the main picture and the sub  
picture simply by pressing the SWAP button.  
English-36  
Download from Www.Somanuals.com. All Manuals Search And Download.  
AA68-03336A-01Eng 6/28/04 4:08 PM Page 37  
Viewing the Picture In Picture (PIP) (depending on the model) (continued)  
TV  
PIP  
10 Press the or button to select Size.  
PIP  
Source  
Swap  
Size  
Position  
Programme  
:On  
:TV  
11 Select a size of sub picture by pressing the ¦¤or button.  
Result:  
The sizes are displayed in the following order:  
Small 3PIP 4PIP 12PIP Large  
3PIP/4PIP/12PIP  
œ
Large  
:
-
-
-
-
: P 1  
: You can view up to 3,4, or 12 memorizer  
channels on the sub picture  
spontaneously.  
Move  
œ √ Adjust  
Return  
PIP  
You can select these options simply by pressing the SIZE  
button.  
TV  
PIP  
Source  
Swap  
:On  
:TV  
12 Press the or button to select Position.  
Size  
Position  
Programme  
:Large  
œ
13 Press the œ or button.  
Result:  
The positions available are displayed.  
- - -  
: P 1  
Move  
œ √ Adjust  
Return  
PIP  
You can select these options simply by pressing the  
Position ( ) button.  
TV  
14 Press the or button to select Programme. You can select the  
channel that you want to view through sub picture by pressing the  
œ or button.  
PIP  
Source  
Swap  
:On  
:TV  
Size  
Position  
Programme  
:Large  
:
When the Sourceis set to TV, you can select the  
channel of sub picture.  
œ
P 1  
You can select the channel of the sub picture simply by  
pressing the or button.  
Move  
œ √ Adjust  
Return  
15 When you have finished, press the EXIT (  
) button to exit.  
English-37  
Download from Www.Somanuals.com. All Manuals Search And Download.  
AA68-03336A-01Eng 6/28/04 4:08 PM Page 38  
Viewing the Picture In Picture (PIP) (depending on the model) (continued)  
Easy functions of remote control  
Buttons  
PIP  
Feature  
Used to activate or deactivate the PIP function directly.  
Used to interchange the main picture and the sub picture.  
SWAP  
When the main picture is in the Video mode and the  
sub picture is in the TV mode, you might not hear the  
(
)
sound of main picture when pressing the SWAP  
button after changing the sub picture channel. At this  
time, reselect the channel of main picture.  
SOURCE  
SIZE  
Used to assign a source of sub picture (TV, EXT1, EXT2,  
EXT3/S-Video).  
Used to select a size of sub picture (Small, 3PIP, 4PIP,  
12PIPor Large).  
POSITION  
Used to move the sub picture counterclockwise.  
Used to select the channel of sub picture.  
P
/
English-38  
Download from Www.Somanuals.com. All Manuals Search And Download.  
AA68-03336A-01Eng 6/28/04 4:08 PM Page 39  
Teletext Feature  
Most television channels provide written information services via  
teletext. Information provided includes:  
Television programme times  
News bulletins and weather forecasts  
Sports results  
Travel information  
This information is divided into numbered pages (see diagram).  
Part  
Contents  
A
B
C
D
E
F
Selected page number.  
Broadcasting channel identity.  
Current page number or search indications.  
Date and time.  
Text.  
Status information.  
FASTEXT information.  
It can be diffrent from depending on TTX source.  
Teletext information is often divided between several  
pages displayed in sequence, which can be accessed by:  
Entering the page number  
Selecting a title in a list  
Selecting a coloured heading (FASTEXT system)  
Displaying the Teletext Information  
You can display Teletext information at any time on your television.  
For Teletext information to be displayed correctly,  
channel reception must be stable; otherwise:  
Information may be missing  
Some pages may not be displayed  
1
2
Select the channel providing the Teletext service using the  
button.  
or  
Press the TTX/MIX (  
Result: The contents page is displayed. It can be redisplayed  
at any time by pressing the (index) button.  
) button to activate the teletext mode.  
3
4
If you wish to display the actual broadcast at the same time as  
the teletext page, press the TTX/MIX ( ) button again.  
Press the TV ( ) button to exit from the teletext display.  
English-39  
Download from Www.Somanuals.com. All Manuals Search And Download.  
AA68-03336A-01Eng 6/28/04 4:08 PM Page 40  
Selecting a Page by Number  
You can enter the page number directly by pressing the numeric  
buttons on the remote control.  
1
Enter the three-digit page number given in the content by pressing  
the corresponding numeric buttons.  
Result:  
The current page counter is incremented and the  
page is then displayed.  
2
If the selected page is linked with several secondary pages, the  
secondary pages are displayed in sequence. To freeze the display  
on a given page, press the  
resume.  
(hold). Press the  
(hold) again to  
Using the various display options:  
To display...  
Press the...  
Both teletext information and  
the normal broadcast  
TTX/MIX (  
twice  
)
Hidden text  
(reveal)  
(answers to quiz games, for example)  
The normal screen  
(reveal) again  
A secondary page,  
(sub-page)  
by entering its 4-digit number  
The next page  
(page up)  
The previous page  
(page down)  
Double-size letters in the:  
• Upper half of the screen  
• Lower half of the screen  
(size)  
• Once  
• Twice  
Normal screen  
• Three times  
English-40  
Download from Www.Somanuals.com. All Manuals Search And Download.  
AA68-03336A-01Eng 6/28/04 4:08 PM Page 41  
Using FLOF to Select a Page  
The various topics included in the teletext pages are colour-coded,  
and can be selected by pressing the coloured buttons on the remote  
control.  
1
2
Display the teletext contents page by pressing the TTX/MIX  
) button.  
(
Press the coloured button corresponding to the topic that you  
wish to select;the available topics are given on the status line.  
Result:  
The page is displayed with other coloured information  
that can be selected in the same way.  
3
4
To display the previous or next page, press the corresponding  
coloured button.  
To display the subpage, see the following steps.  
Press the  
Result:  
(sub-page) button.  
The available subpages appear.  
Select the required sub-page. Sub-pages can be scrolled by  
using the TURBO (Red) or S.MENU (Green) button.  
Storing Teletext Pages  
You can store up to four teletext pages to display them later at  
leisure.  
1
Select the LIST mode using the  
button.  
Result:  
Four 3-digit numbers are displayed in different  
colours.  
The button is used to switch between the LIST and  
FLOF (or FASTEXT) modes.  
2
Press the coloured button corresponding to the page that will be  
replaced.  
3
4
Enter the new page number using the numeric buttons.  
Repeat steps  
2
and  
3
for each page to be stored, using a  
different coloured button each time.  
5
Press the  
(store) button until the corresponding blocks blink.  
English-41  
Download from Www.Somanuals.com. All Manuals Search And Download.  
AA68-03336A-01Eng 6/28/04 4:09 PM Page 42  
Connecting to the External Input/Outputs  
1
” is used for the equipment with an RGB output,  
VCR  
DVD  
such as video game devices or video disc players.  
Rear of the TV  
2
Decoder /  
Video game device  
or  
1
RGB  
Video disc player  
Satellite receiver  
This end can be fitted with:  
A SCART connector  
Three RCA connectors (Video + Audio-L and R)  
If you have a second VCR and wish to copy cassettes tape, connect the  
1
2
source VCR to  
and the target VCR to  
so that you can  
1
2
redirect the signal from  
to  
.  
If you have a decoder, connect the decoder to the VCR and the VCR to the  
television.  
1
1
When you wish to record a programme, connect the receiver to  
2
and the VCR to  
so that you can redirect the signal from  
to  
2
.  
Connecting to the Audio Output  
The “MONITOR AUDIO OUT” (RCA) connectors are used for equipment, such as an audio system  
(to take full advantage of the Surround sound effect).  
Rear of the TV  
Audio system  
MONITOR  
AUDIO OUT  
L
R
English-42  
Download from Www.Somanuals.com. All Manuals Search And Download.  
AA68-03336A-01Eng 6/28/04 4:09 PM Page 43  
Connecting to the RCA Input  
The RCA (VIDEO and AUDIO-L+R) connectors are used for equipment,  
such as camcorders, video disc players, and some video game devices.  
Camcorder  
Side of the TV  
Video game device  
Video disc player  
Connecting to the S-Video Input  
The S-VIDEO and RCA (AUDIO-L+R) connectors are used for equipment with an S-Video output,  
such as a camcorder or VCR.  
Side of the TV  
Camcorder  
VCR  
and  
To play pictures and sound, both the S-VIDEO and RCA connectors must be used.  
Whenever you connect an audio or video system to your  
television, ensure that all elements are switched off.  
Refer to the documentation supplied with your equipment  
for detailed connection instructions and associated safety  
precautions.  
English-43  
Download from Www.Somanuals.com. All Manuals Search And Download.  
AA68-03336A-01Eng 6/28/04 4:09 PM Page 44  
Viewing Pictures From External Sources  
Once you have connected up your various audio and video  
systems, you can view different sources by selecting the  
appropriate input.  
1
2
Check that all the necessary connections have been made.  
(
)
Switch your television on, then press the SOURCE  
button  
repeatedly.  
Result:  
The input sources are displayed in the following  
order:  
EXT1  
-
EXT2  
-
EXT3/S-Video  
Depending on the source selected, the pictures may appear  
automatically.  
To watch television programmes again, press the TV (  
button and select the number of the channel required.  
)
English-44  
Download from Www.Somanuals.com. All Manuals Search And Download.  
AA68-03336A-01Eng 6/28/04 4:09 PM Page 45  
Automatic Degaussing to Remove Colour Patches  
A degaussing coil is mounted around the picture tube, so you do not normally need to degauss the  
television manually.  
If you move the television to a different position and colour patches appear on the screen, you must:  
Switch the television off by pressing the “ ” (On/Off) button on the front panel  
Unplug the television from the wall socket  
Leave the television power-off for about 30 minutes so that the automatic degauss function  
can be activated, and then press the “POWER( )” button on the remote control.  
If your television will be left unattended, press the “ ” (On/Off) button to turn your  
television off.  
Troubleshooting: Before Contacting Service Personnel  
Before contacting Samsung after-sales service, perform the following simple checks.  
If you cannot solve the problem using the instructions below, note the model and serial number of the  
television and contact your local dealer.  
No sound or picture  
Check that the mains lead has been connected to a wall socket.  
Check that you have pressed the “ ” button (On/Off) and the  
POWER ( ) button.  
Check the picture contrast and brightness settings.  
Check the volume.  
Normal picture but no sound  
Check the volume.  
Check whether the MUTE ( ) button on the remote control has  
been pressed.  
No picture or black and white picture  
Sound and picture interference  
Adjust the colour settings.  
Check that the broadcast system selected is correct.  
Try to identify the electrical appliance that is affecting the television,  
then move it further away.  
Plug your television into a different mains socket.  
Blurred or snowy picture,  
distorted sound  
Check the direction, location and connections of your aerial.  
This interference often occurs due to the use of an indoor aerial.  
Remote control malfunctions  
Replace the remote control batteries.  
Clean the upper edge of the remote control (transmission window).  
Check the battery terminals.  
English-45  
Download from Www.Somanuals.com. All Manuals Search And Download.  
AA68-03336A-01Eng 6/28/04 4:09 PM Page 46  
Memo  
English-46  
Download from Www.Somanuals.com. All Manuals Search And Download.  
AA68-03336A-01Eng 6/28/04 4:09 PM Page 47  
Memo  
English-47  
Download from Www.Somanuals.com. All Manuals Search And Download.  
AA68-03336A-01Eng 6/28/04 4:09 PM Page 48  
-
AFTER SALES SERVICE  
-
Do not hesitate to contact your retailer or service agent  
if a change in the performance of your product  
indicates that a faulty condition may be present.  
ELECTRONICS  
AA68-03336A-01  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Qualcomm Cordless Telephone GSP 1600 User Guide
Quantum Network Card SDLT 600A User Guide
Remington Blower B75150A User Guide
Renesas Computer Hardware M16C 62P Group User Guide
Ricoh All in One Printer 161F User Guide
Roberts Radio Radio R9942 User Guide
Rockford Fosgate Speaker P1S4 12 User Guide
Samsung Computer Monitor 180T User Guide
Samsung Projection Television HL R5066W User Guide
Sanus Systems Surge Protector ELM205 User Guide