O w n e r’s Ma n u a l
Thank you, and congratulations on your choice of the Roland CUBE-30 BASS Bass Amplifier.
Before using this unit, carefully read the sections entitled:
•
•
•
IMPORTANT SAFETY INSTRUCTIONS (p. 2)
USING THE UNIT SAFELY (p. 3–4)
IMPORTANT NOTES (p. 4)
These sections provide important information concerning the proper operation of the unit. Additionally,
in order to feel assured that you have gained a good grasp of every feature provided by your new unit,
Owner’s manual should be read in its entirety. The manual should be saved and kept on hand as a
convenient reference.
This unit is equipped with a protection circuit.
The protection circuit helps ensure safety by operating when excessive input continues for a long time
while the device is at a location with a high ambient temperature. Sound drop-out may occur when the
protection circuit is actuated during use.
Please read through the documentation carefully to ensure correct use.
Ma in Fe a tu re s
•
Adopting Roland’s original FFP technology, this highly functional DSP bass amp features 30-watt
sound output through a 25 cm (10-inch) coaxial 2-way wide-range speaker.
•
The amp is equipped with a total of seven COSM amp model types, including six of the most
popular bass amps along with an original amp sound that mixes in doubled bass sounds an octave
below those being played.
•
•
In addition to an easy-to-use “3-band equalizer,” this amp features a “Shape” function for even
greater flexibility in creating sounds and rich sound variation.
The amp is equipped with a total of three bass effect systems, including “COMPRESSION,” an
“EFX” system with CHORUS, FLANGER, and T-WAH, and basic “DELAY/ REVERB”.
•
•
Equipped with RECORDING OUT jack convenient for use in recording and for use as headphone out.
Auxiliary input jack allows you to connect a CD player or other backing device.
FFP (Feed Forward Processing) is system control technology that optimizes the performance
of the amp, speakers, and cabinet characteristics according to the signals being input, based on
the results of analyses of the operation and behavior of each section of existing amp systems.
COSM (Composite Object Sound Modeling) is Roland’s innovative and powerful sound
modeling technology. COSM analyzes the many factors that make up the original sound, such as
the electrical and physical characteristics of the original, and then produces a digital model that
can reproduce the same sound.
220
*
All product names mentioned in this document are trademarks or registered trademarks of their
respective owners.
Copyright © 2003 ROLAND CORPORATION
All rights reserved. No part of this publication may be reproduced in any form without the written
permission of ROLAND CORPORATION.
Download from Www.Somanuals.com. All Manuals Search And Download.
The
symbol alerts the user to important instructions
Used for instructions intended to alert
the user to the risk of death or severe
injury should the unit be used
improperly.
or warnings.The specific meaning of the symbol is
determined by the design contained within the
triangle. In the case of the symbol at left, it is used for
general cautions, warnings, or alerts to danger.
Used for instructions intended to alert
the user to the risk of injury or material
damage should the unit be used
improperly.
The
symbol alerts the user to items that must never
be carried out (are forbidden). The specific thing that
must not be done is indicated by the design contained
within the circle. In the case of the symbol at left, it
means that the unit must never be disassembled.
* Material damage refers to damage or
other adverse effects caused with
respect to the home and all its
furnishings, as well to domestic
animals or pets.
The ● symbol alerts the user to things that must be
carried out. The specific thing that must be done is
indicated by the design contained within the circle. In
the case of the symbol at left, it means that the power-
cord plug must be unplugged from the outlet.
001
011
•
•
Before using this unit, make sure to read the instructions
below, and the Owner’s Manual.
Do not allow any objects (e.g., flammable material, coins,
pins); or liquids of any kind (water, soft drinks, etc.) to
penetrate the unit.
.........................................................................................................................................
002a
•
Do not open or perform any internal modifications on the
unit.
.........................................................................................................................................
012a:
.........................................................................................................................................
•
Immediately turn the power off, remove the power cord
from the outlet, and request servicing by your retailer, the
nearest Roland Service Center, or an authorized Roland
distributor, as listed on the “Information” page when:
003
•
Do not attempt to repair the unit, or replace parts within it
(except when this manual provides specific instructions
directing you to do so). Refer all servicing to your retailer,
the nearest Roland Service Center, or an authorized
Roland distributor, as listed on the “Information” page.
•
The power-supply cord, or the plug has been
damaged; or
•
•
If smoke or unusual odor occurs
Objects have fallen into, or liquid has been spilled onto
the unit; or
The unit has been exposed to rain (or otherwise has
become wet); or
.........................................................................................................................................
004
•
Never use or store the unit in places that are:
•
Subject to temperature extremes (e.g., direct sunlight in
an enclosed vehicle, near a heating duct, on top of heat-
generating equipment); or are
•
•
The unit does not appear to operate normally or
exhibits a marked change in performance.
•
•
•
•
•
Damp (e.g., baths, washrooms, on wet floors); or are
Humid; or are
Exposed to rain; or are
Dusty; or are
Subject to high levels of vibration.
.........................................................................................................................................
013
•
In households with small children, an adult should
provide supervision until the child is capable of following
all the rules essential for the safe operation of the unit.
.........................................................................................................................................
007
•
.........................................................................................................................................
Make sure you always have the unit placed so it is level
and sure to remain stable. Never place it on stands that
could wobble, or on inclined surfaces.
014
•
Protect the unit from strong impact.
(Do not drop it!)
.........................................................................................................................................
.........................................................................................................................................
008a
15
•
The unit should be connected to a power supply only of
the type described in the operating instructions, or as
marked on the unit.
•
Do not force the unit’s power-supply cord to share an
outlet with an unreasonable number of other devices. Be
especially careful when using extension cords—the total
power used by all devices you have connected to the
extension cord’s outlet must never exceed the power
rating (watts/ amperes) for the extension cord. Excessive
loads can cause the insulation on the cord to heat up and
eventually melt through.
.........................................................................................................................................
009
•
Do not excessively twist or bend the power cord, nor
place heavy objects on it. Doing so can damage the cord,
producing severed elements and short circuits. Damaged
cords are fire and shock hazards!
.........................................................................................................................................
.........................................................................................................................................
010
016
•
This unit, either alone or in combination with an
amplifier and headphones or speakers, may be capable of
producing sound levels that could cause permanent
hearing loss. Do not operate for a long period of time at a
high volume level, or at a level that is uncomfortable. If
you experience any hearing loss or ringing in the ears,
you should immediately stop using the unit, and consult
an audiologist.
•
Before using the unit in a foreign country, consult with
your retailer, the nearest Roland Service Center, or an
authorized Roland distributor, as listed on the “Infor-
mation” page.
.........................................................................................................................................
026
•
To reduce the risk of fire or electric shock, do not expose
this apparatus to rain or moisture and objects filled with
liquids, such as vases, should not be placed on this
apparatus.
.........................................................................................................................................
.........................................................................................................................................
3
Download from Www.Somanuals.com. All Manuals Search And Download.
101a
106
•
•
The unit should be located so that its location or position
Never climb on top of, nor place heavy objects on the
unit.
does not interfere with its proper ventilation.
.........................................................................................................................................
.........................................................................................................................................
102a
107a
•
Always grasp only the plug on the power-supply cord
•
Never handle the power cord or its plug with wet hands
when plugging into, or unplugging from an outlet.
when plugging into, or unplugging from, an outlet.
.........................................................................................................................................
.........................................................................................................................................
108a
103a:
•
Before moving the unit, disconnect the power plug from
•
Any accumulation of dust between the power plug and
the power outlet can result in poor insulation and lead to
fire. Periodically wipe away such dust with a dry cloth.
Also, disconnect the power plug from the power outlet
whenever the unit is to remain unused for an extended
period of time.
the outlet, and pull out all cords from external devices.
.........................................................................................................................................
109a
•
Before cleaning the unit, turn off the power and unplug
the power cord from the outlet.
.........................................................................................................................................
.........................................................................................................................................
104
110a
•
Try to prevent cords and cables from becoming
entangled. Also, all cords and cables should be placed so
they are out of the reach of children.
•
Whenever you suspect the possibility of lightning in your
area, pull the plug on the power cord out of the outlet.
.........................................................................................................................................
.........................................................................................................................................
IMPO RTAN T N O TES
291b
In addition to the items listed under “IMPORTANT SAFETY INSTRUCTIONS” and “USING THE UNIT SAFELY” on pages 2, 3 and 4,
please read and observe the following:
402
Po w e r Su p p ly
•
Never use benzine, thinners, alcohol or solvents of any kind, to avoid the
possibility of discoloration and/ or deformation.
301
•
Do not use this unit on the same power circuit with any device that will
generate line noise (such as an electric motor or variable lighting system).
Ad d itio n a l Pre ca u tio n s
307
•
553
•
Before connecting this unit to other devices, turn off the power to all units. This
will help prevent malfunctions and/ or damage to speakers or other devices.
Use a reasonable amount of care when using the unit’s buttons, sliders, or
other controls; and when using its jacks and connectors. Rough handling
can lead to malfunctions.
308
•
Although the LEDs are switched off when the POWER switch is switched
off, this does not mean that the unit has been completely disconnected from
the source of power. If you need to turn off the power completely, first turn
off the POWER switch, then unplug the power cord from the power outlet.
For this reason, the outlet into which you choose to connect the power
cord’s plug should be one that is within easy reach.
556
•
When connecting / disconnecting all cables, grasp the connector itself—
never pull on the cable. This way you will avoid causing shorts, or damage
to the cable’s internal elements.
557
•
A small amount of heat will radiate from the unit during normal operation.
558a
•
To avoid disturbing your neighbors, try to keep the unit’s volume at
Pla ce m e n t
reasonable levels. You may prefer to use headphones, so you do not need to
be concerned about those around you (especially when it is late at night).
351
•
Using the unit near power amplifiers (or other equipment containing large
power transformers) may induce hum. To alleviate the problem, change the
orientation of this unit; or move it farther away from the source of inter-
ference.
559a
•
When you need to transport the unit, package it in the box (including
padding) that it came in, if possible. Otherwise, you will need to use equiv-
alent packaging materials.
352a
562
•
•
This device may interfere with radio and television reception. Do not use
this device in the vicinity of such receivers.
Use a cable from Roland to make the connection. If using some other make of
connection cable, please note the following precautions.
352b
•
Some connection cables contain resistors. Do not use cables that incor-
porate resistors for connecting to this unit. The use of such cables can
cause the sound level to be extremely low, or impossible to hear. For
information on cable specifications, contact the manufacturer of the
cable.
•
Noise may be produced if wireless communications devices, such as cell
phones, are operated in the vicinity of this unit. Such noise could occur
when receiving or initiating a call, or while conversing. Should you
experience such problems, you should relocate such wireless devices so
they are at a greater distance from this unit, or switch them off.
354b
921
•
•
Do not expose the unit to direct sunlight, place it near devices that radiate
To prevent malfunction and/ or damage to speakers or other devices,
always turn down the volume, and turn off the power on all devices before
making any connections.
heat, leave it inside an enclosed vehicle, or otherwise subject it to temper-
ature extremes. Also, do not allow lighting devices that normally are used
while their light source is very close to the unit (such as a piano light), or
powerful spotlights to shine upon the same area of the unit for extended
periods of time. Excessive heat can deform or discolor the unit.
926
•
When connection cables with resistors are used, the volume level of
equipment connected to the inputs (INPUT and AUX IN jacks) may be low.
If this happens, use connection cables that do not contain resistors, such as
those from the Roland PCS series.
355b
•
When moved from one location to another where the temperature and/ or
humidity is very different, water droplets (condensation) may form inside
the unit. Damage or malfunction may result if you attempt to use the unit in
this condition. Therefore, before using the unit, you must allow it to stand
for several hours, until the condensation has completely evaporated.
941
•
Once the connections have been completed, turn on power to your various
devices in the order specified. By turning on devices in the wrong order,
you risk causing malfunction and/ or damage to speakers and other devices.
When powering up:
356
•
Do not allow rubber, vinyl, or similar materials to remain on the unit for
long periods of time. Such objects can discolor or otherwise harmfully affect
the finish.
Turn on the power to the CUBE-30 BASS last.
When powering down:
Turn off the power to the CUBE-30 BASS first.
359
•
Do not paste stickers, decals, or the like to this instrument. Peeling such
matter off the instrument may damage the exterior finish.
943
•
Always make sure to have the volume level turned down before switching
on power. Even with the volume all the way down, you may still hear some
sound when the power is switched on, but this is normal, and does not
indicate a malfunction.
Ma in te n a n ce
401b
•
To clean the unit, use a dry, soft cloth; or one that is slightly dampened. Try
to wipe the entire surface using an equal amount of strength, moving the
cloth along with the grain of the wood. Rubbing too hard in the same area
can damage the finish.
•
Wrap the AC cord around the cord hook when trans-porting or storing the
unit.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Pa n e l De scrip tio n s
fig.01
7
8
9
10
11
13
14
16
1
2
3
4
5
6
12
15
T.E
1. INPUT Jack
Models the Trace Elliot AH600SMX + 1048 (4 x 10”) + 1518 (1 x
15”). This amp was used widely by rock bands in the 1980s. Its
wide range, clear attack, and other features make it a great amp
for all kinds of performance situations.
Connect your bass here.
2. COMPRESSION Knob
This is an effect that compresses overly high signals while
boosting lower-level input.
Offers more attack.
Turning the knob to the right increases the compression effect.
When compression is on, the ON indicator lights up; the
indicator is unlit when the effect is turned off.
BASS360
Models the acoustic 360 (1 x 18”).
This amp was used in the ’70s not only by jazz bassists, but by
funk and hard rock players as well. The tone features a warm
low end with a midrange that maintains a clear contour, even
with finger picking.
CO SM AMPLIFIER
3. SHAPE Switch
Offers more nuances of your picking expression.
This effect alters the COSM amps’ tonal qualities. The particular
SESSION
effect obtained varies according to the amp selected with the
Models the SWR SM-400 + Goliath (4 x 10”) + Big Ben (1 x 18”).
This tweeter-equipped amp is representative of the “L.A.
Sound” of the eighties. It features a wide-range tone that
balances presence in the low end with a clear, open sound.
Type switch (●).
4. Type Switch
You can select from the following seven amp types:
Offers a tight tone with a cut midrange.
OCTAVE BASS
CONCERT 810
This original amp type creates sounds one octave below the
input sounds and layers them together to create a fatter bass
sound.
Models the Ampeg SVT + 810E (8 x 10”).
This amp typifies the rock sound that relied heavily on
combinations of high-output tube amp sections and large-sized
cabinets.
Offers more edge in the octave sound.
*
This function may not work properly when inputting chords; for
example, sounds may not play, or they may be played at incorrect
pitches. Always input a single note.
The characteristic sound is one of overwhelming low-frequency
sound pressure.
Offers extra heavy bottom sound.
FLIP TOP
*
All product names mentioned in this document are trademarks or
registered trademarks of their respective owners, and are not related to
Roland Corporation.
Models the Ampeg B-15 (1 x 15”). This amp provided the
underpinning for many of the most famous Motown hits. It
features a fat sound, while the amp's compact cabinet produces
a distinct contour.
In this manual, these names are used as appropriate ways to indicate
sounds that are simulated using COSM technology.
Offers more nuances of your picking expression.
5. GAIN Knob
B MAN
This adjusts the preamp section’s input level.
Turning the knob to the right increases the gain.
Using a high gain setting allows you to get an overdrive sound.
Models the Fender Bassman 100 (4 x 10”).
This amp has been a favorite since the inception of electric
basses. It features the sonic characteristics of tube amps,
whereby increasing the distortion slightly yields a fatter sound.
Set the knob to as high a value as possible before the sound
distorts to get the best signal-to-noise ratio.
Offers a tone with boosted midrange “fatness.”
6. VOLUME Knob
Adjusts the overall volume.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Panel Descriptions
12. FOOT SW (Foot Switch) Jack
EQ UALIZER
You can use foot switches (the optional BOSS FS-5U) connected
using a connection cable (the optional PCS-31) to turn EFX on
and off, and to turn DELAY/ REVERB on and off.
fig.06
7. BASS Knob
Adjusts the tone quality of the lower range.
8. MIDDLE Knob
PCS-31
Adjusts the tone quality of the midrange.
9. TREBLE Knob
White (TIP)
Red (RING)
Adjusts the tone quality of the upper range.
10. EFX (Effects) Knob
Turn this knob to chorus, flanger, or T-wah to select the
corresponding effect. Turn the knob to adjust the amount of
effect applied.
EFX
DELAY/REVERB
Polarity Switch
*
When you connect only one foot switch by mono cable, you can only
use it to turn EFX on and off.
The ON indicator lights up when EFX is turned on, and goes
out when EFX is turned off. You can also turn EFX on and off
using an optional foot switch (the BOSS FS-5U).
*
Graduations for CHORUS, FLANGER and T-WAH on a panel are
for reference. Be sure to check the sound as you adjust the effects.
13. AUX IN Jack
You can connect a CD player or other kind of device and have it
fig.02CHORUS
play along with your bass.
This accepts a 1/ 4” stereo phone plug. However, the speaker
and RECORDING OUT/ PHONES output is monaural.
In this effect, a slightly detuned sound is
added to the original sound, giving the
sound greater breadth and fullness.
Turning the knob to the right increases
the rate and deepens the chorus effect.
*
Determine the volume level by adjusting the volume control of the
connected device.
14. RECORDING OUT/PHONES Jack
fig.03FLANGER
fig.02When Using This as RECORDING OUT
This creates a flanging effect that creates a
sort of spinning sensation with the sound.
Turning the knob to the right increases the
rate and deepens the flanging effect.
Use mono 1/ 4” phone plugs when connecting
to this jack.
The RECORDING OUT volume level can be
set easily by turning the VOLUME knob to a
position within the range shown in the figure.
fig.04T-WAH
The frequency response of the filter
When Using This as PHONES
changes according to the input level,
producing unique changes in the timbre.
Turning the knob to the right increases
the sensitivity to the input level.
Connect headphones to this jack.
*
No sound is played through the unit' s speaker while the
RECORDING OUT/PHONES jack is in use.
Adjust this to obtain the optimal effect, which is matched with
the output level of your bass.
15. POWER Switch
Turns the power on and off.
*
This unit is equipped with a protection circuit. A brief interval (a few
seconds) after power up is required before the unit will operate
normally.
11. DELAY/REVERB Knob
Turn this knob to DELAY or REVERB to switch to that effect.
Turn the knob to adjust the amount of effect applied.
*
Graduations for DELAY, REVERB on a panel are for reference.
Be sure to check the sound as you adjust the effects.
16. Power Indicator
This indicator lights when the unit is turned on.
fig.05Da ELAY
Turn the knob to change the delay time.
fig.05Rb EVERB
Turn the knob to adjust the reverb level.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Ma in Sp e cifica tio n s
Rated Power Output
30 W
Connectors
INPUT Jack (1/ 4 inch phone type)
AUX IN Jack (1/ 4 inch TRS phone type)
Nominal Input Level (1kHz)
INPUT: -20 dBu
RECORDING OUT/ PHONES Jack (STEREO 1/ 4 inch phone type)
FOOT Switch Jack (EFX, DELAY/ REVERB) (1/ 4 inch TRS phone type)
AUX IN: -10 dBu
Power Supply
AC 117 V, 230 V or 240 V
Speaker
25 cm (10 inches) + Tweeter (Coaxial, 2-way)
Power Consumption
34 W
Controls
POWER Switch
<COMPRESSION>
COMPRESSION Knob
<COSM AMPLIFIER>
SHAPE Switch
Dimension
380 (W) x 300 (D) x 385 (H) mm
15-3/ 16 (W) X 9-1/ 2 (D) X 15 (H) inches
Weights
12 kg / 20 lbs 5 oz
TYPE Knob (OCTAVE BASS, FLIP TOP, B MAN, T.E, BASS 360,
SESSION, CONCERT 810)
GAIN Knob
Accessories
Owner’s Manual
VOLUME Knob
<EQUALIZER>
BASS Knob
Options
MIDDLE Knob
Foot switch FS-5U (BOSS)
TREBLE Knob
Connection cable PCS-31
<EFX>
EFX Knob (CHORUS, FLANGER, T-WAH)
<DELAY/REVERB>
DELAY/ REVERB Knob
*
*
0 dBu = 0.775 Vrms
In the interest of product improvement, the specifications and/or
appearance of this unit are subject to change without prior notice.
Indicators
Power
COMPRESSION
EFX
For EU Countries
This product complies with the requirements of European Directives EMC 89/336/EEC and LVD 73/23/EEC.
For the USA
FEDERAL COMMUNICATIONS COMMISSION
RADIO FREQUENCY INTERFERENCE STATEMENT
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
–
–
–
–
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation.
Unauthorized changes or modification to this system can void the users authority to operate this equipment.
This equipment requires shielded interface cables in order to meet FCC class B Limit.
For Canada
NOTICE
This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations.
AVIS
Cet appareil numérique de la classe B respecte toutes les exigences du Règlement sur le matériel brouilleur du Canada.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
In fo rm a tio n
When you need repair service, call your nearest Roland Service Center or authorized Roland distributor in your country as
shown below.
PAN AMA
ITALY
ISRAEL
SIN GAPO RE
AFRICA
SUPRO MUNDIAL, S.A.
Boulevard Andrews, Albrook,
Panama City, REP. DE PANAMA
TEL: 315-0101
Roland Italy S. p. A.
Viale delle Industrie 8,
20020 Arese, Milano, ITALY
TEL: (02) 937-78300
Halilit P. Greenspoon &
Swee Lee Company
150 Sims Drive,
Sons Ltd.
SINGAPORE 387381
TEL: 6846-3676
8 Retzif Ha'aliya Hashnya St.
Tel-Aviv-Yafo ISRAEL
TEL: (03) 6823666
EGYPT
Al Fanny Trading Office
9, EBN Hagar A1 Askalany Street,
ARD E1 Golf, Heliopolis,
Cairo 11341, EGYPT
CRISTOFORI MUSIC PTE
LTD
Blk 3014, Bedok Industrial Park E,
#02-2148, SINGAPORE 489980
TEL: 6243-9555
N O RW AY
Roland Scandinavia Avd.
Kontor Norge
Lilleakerveien 2 Postboks 95
Lilleaker N-0216 Oslo
NORWAY
PARAGUAY
Distribuidora De
Instrumentos Musicales
J.E. Olear y ESQ. Manduvira
Asuncion PARAGUAY
TEL: (021) 492-124
JO RDAN
AMMAN Trading Agency
245 Prince Mohammad St.,
Amman 1118, JORDAN
TEL: (06) 464-1200
TEL: 20-2-417-1828
REUN IO N
Maison FO - YAM Marcel
25 Rue Jules Hermann,
Chaudron - BP79 97 491
Ste Clotilde Cedex,
TAIW AN
ROLAND TAIWAN
ENTERPRISE CO., LTD.
Room 5, 9fl. No. 112 Chung Shan
N.Road Sec.2, Taipei, TAIWAN,
R.O.C.
TEL: 2273 0074
KUW AIT
Easa Husain Al Yousifi Est.
Abdullah Salem Street,
Safat, KUWAIT
PO LAN D
P. P. H. Brzostowicz
UL. Gibraltarska 4.
PL-03664 Warszawa POLAND
TEL: (022) 679 44 19
URUGUAY
Todo Musica S.A.
Francisco Acuna de Figueroa 1771
C.P.: 11.800
Montevideo, URUGUAY
TEL: (02) 924-2335
REUNION ISLAND
TEL: (0262) 218-429
TEL: 243-6399
TEL: (02) 2561 3339
SO UTH AFRICA
That Other Music Shop
(PTY) Ltd.
11 Melle St., Braamfontein,
Johannesbourg, SOUTH AFRICA
LEBAN O N
Chahine S.A.L.
Gerge Zeidan St., Chahine Bldg.,
Achrafieh, P.O.Box: 16-5857
Beirut, LEBANON
PO RTUGAL
THAILAN D
VEN EZUELA
Tecnologias Musica e Audio,
Roland Portugal, S.A.
Cais Das Pedras, 8/ 9-1 Dto
4050-465 PORTO
Theera Music Co. , Ltd.
330 Verng NakornKasem, Soi 2,
Bangkok 10100, THAILAND
TEL: (02) 2248821
Musicland Digital C.A.
Av. Francisco de Miranda,
Centro Parque de Cristal, Nivel
C2 Local 20 Caracas
TEL: (01) 20-1441
P.O.Box 32918, Braamfontein 2017
Johannesbourg, SOUTH AFRICA
TEL: (011) 403 4105
PORTUGAL
TEL: (022) 608 00 60
Q ATAR
Al Emadi Co. (Badie Studio
& Stores)
P.O. Box 62,
Doha, QATAR
TEL: 4423-554
VENEZUELA
TEL: (212) 285-8586
VIETN AM
Saigon Music
138 Tran Quang Khai St.,
District 1
Ho Chi Minh City
VIETNAM
TEL: (08) 844-4068
Paul Bothner (PTY) Ltd.
17 Werdmuller Centre,
Main Road, Claremont 7708
SOUTH AFRICA
RO MAN IA
FBS LINES
Piata Libertatii 1,
RO-4200 Gheorghehi
TEL: (095) 169-5043
EURO PE
P.O.BOX 23032, Claremont 7735,
SOUTH AFRICA
TEL: (021) 674 4030
AUSTRIA
Roland Austria GES.M.B.H.
Siemensstrasse 4, P.O. Box 74,
A-6063 RUM, AUSTRIA
SAUDI ARABIA
aDawliah Universal
Electronics APL
Corniche Road, Aldossary Bldg.,
1st Floor, Alkhobar,
SAUDI ARABIA
RUSSIA
MuTek
3-Bogatyrskaya Str. 1.k.l
107 564 Moscow, RUSSIA
TEL: (095) 169 5043
AUSTRALIA/
N EW ZEALAN D
TEL: (0512) 26 44 260
ASIA
AUSTRALIA
BELGIUM/ HOLLAND/
LUXEMBO URG
Roland Benelux N. V
Houtstraat 3, B-2260, Oevel
(Westerlo) BELGIUM
TEL: (014) 575811
CHIN A
Roland Shanghai Electronics
Co.,Ltd.
5F. No.1500 Pingliang Road
Shanghai, CHINA
TEL: (021) 5580-0800
SPAIN
Roland Electronics
de España, S. A.
Calle Bolivia 239, 08020
Barcelona, SPAIN
Roland Corporation
Australia Pty., Ltd.
38 Campbell Avenue
Dee Why West. NSW 2099
AUSTRALIA
P.O.Box 2154, Alkhobar 31952
SAUDI ARABIA
TEL: (03) 898 2081
.
SYRIA
Technical Light & Sound
TEL: (93) 308 1000
TEL: (02) 9982 8266
Center
DEN MARK
SW EDEN
Roland Shanghai Electronics
Co.,Ltd.
(BEIJING OFFICE)
10F. No.18 Anhuaxili
Chaoyang District, Beijing,
CHINA
Khaled Ebn Al Walid St.
Bldg. No. 47, P.O.BOX 13520,
Damascus, SYRIA
TEL: (011) 223-5384
N EW ZEALAN D
Roland Scandinavia A/S
Nordhavnsvej 7, Postbox 880,
DK-2100 Copenhagen
DENMARK
Roland Scandinavia A/S
SWEDISH SALES OFFICE
Danvik Center 28, 2 tr.
S-131 30 Nacka SWEDEN
TEL: (0)8 702 00 20
Roland Corporation Ltd.
32 Shaddock Street, Mount Eden,
Auckland, NEW ZEALAND
TEL: (09) 3098 715
TEL: 3916 6200
TURKEY
Barkat muzik aletleri ithalat
ve ihracat Ltd Sti
Siraselviler Caddesi Siraselviler
Pasaji No:74/ 20
TEL: (010) 6426-5050
FRAN CE
Roland France SA
4, Rue Paul Henri SPAAK,
Parc de l'Esplanade, F 77 462 St.
Thibault, Lagny Cedex FRANCE
TEL: 01 600 73 500
CEN TRAL/ LATIN
AMERICA
SW ITZERLAN D
Roland (Switzerland) AG
Landstrasse 5, Postfach,
CH-4452 Itingen,
SWITZERLAND
TEL: (061) 927-8383
HO N G KO N G
Tom Lee Music Co., Ltd.
Service Division
22-32 Pun Shan Street, Tsuen
Wan, New Territories,
HONG KONG
Taksim - Istanbul, TURKEY
TEL: (0212) 2499324
ARGEN TIN A
Instrumentos Musicales S.A.
Av.Santa Fe 2055
(1123) Buenos Aires
ARGENTINA
TEL: (011) 4508-2700
U.A.E.
Zak Electronics & Musical
Instruments Co. L.L.C.
Zabeel Road, Al Sherooq Bldg.,
No. 14, Grand Floor, Dubai, U.A.E.
TEL: (04) 3360715
FIN LAN D
Roland Scandinavia As,
Filial Finland
Lauttasaarentie 54 B
Fin-00201 Helsinki, FINLAND
TEL: (0)9 68 24 020
UKRAIN E
TEL: 2415 0911
TIC-TAC
Mira Str. 19/ 108
IN DIA
P.O. Box 180
295400 Munkachevo, UKRAINE
TEL: (03131) 414-40
Rivera Digitec (India) Pvt. Ltd.
409, Nirman Kendra Mahalaxmi
Flats Compound Off. Dr. Edwin
Moses Road, Mumbai-400011,
INDIA
BRAZIL
Roland Brasil Ltda
Rua San Jose, 780 Sala B
Parque Industrial San Jose
Cotia - Sao Paulo - SP, BRAZIL
TEL: (011) 4615 5666
GERMAN Y
Roland Elektronische
Musikinstrumente HmbH.
Oststrasse 96, 22844 Norderstedt,
GERMANY
UN ITED KIN GDO M
N O RTH AMERICA
Roland (U.K.) Ltd.
Atlantic Close, Swansea
Enterprise Park, SWANSEA
SA7 9FJ,
TEL: (022) 2493 9051
IN DO N ESIA
PT Citra IntiRama
J1. Cideng Timur No. 15J-150
Jakarta Pusat
INDONESIA
TEL: (021) 6324170
CAN ADA
Roland Canada Music Ltd.
(Head Office)
5480 Parkwood Way Richmond
B. C., V6V 2M4 CANADA
TEL: (604) 270 6626
CO STA RICA
JUAN Bansbach
Instrumentos Musicales
Ave.1. Calle 11, Apartado 10237,
San Jose, COSTA RICA
TEL: 258-0211
TEL: (040) 52 60090
UNITED KINGDOM
TEL: (01792) 700139
GREECE
STOLLAS S.A.
Music Sound Light
155, New National Road
Patras 26442, GREECE
TEL: 2610 435400
MIDDLE EAST
KO REA
Roland Canada Music Ltd.
Cosmos Corporation
1461-9, Seocho-Dong,
Seocho Ku, Seoul, KOREA
TEL: (02) 3486-8855
CHILE
Comercial Fancy S.A.
Rut.: 96.919.420-1
Nataniel Cox #739, 4th Floor
Santiago - Centro, CHILE
TEL: (02) 688-9540
(Toronto Office)
170 Admiral Boulevard
Mississauga On L5T 2N6
CANADA
BAHRAIN
Moon Stores
No.16, Bab Al Bahrain Avenue,
P.O.Box 247, Manama 304,
State of BAHRAIN
HUN GARY
Roland East Europe Ltd.
Warehouse Area ‘DEPO’ Pf.83
H-2046 Torokbalint, HUNGARY
TEL: (23) 511011
TEL: (905) 362 9707
MALAYSIA
BENTLEY MUSIC SDN BHD
140 & 142, Jalan Bukit Bintang
55100 Kuala Lumpur,MALAYSIA
TEL: (03) 2144-3333
TEL: 211 005
U. S. A.
EL SALVADO R
Roland Corporation U.S
5100 S. Eastern Avenue
Los Angeles, CA 90040-2938,
U. S. A.
.
CYPRUS
Radex Sound Equipment Ltd.
17, Diagorou Street, Nicosia,
CYPRUS
OMNI MUSIC
IRELAN D
Roland Ireland
Audio House, Belmont Court,
Donnybrook, Dublin 4.
Republic of IRELAND
TEL: (01) 2603501
75 Avenida Norte y Final
Alameda Juan Pablo
,
PHILIPPIN ES
Edificio No.4010 San Salvador,
EL SALVADOR
TEL: 262-0788
TEL: (323) 890 3700
G.A. Yupangco & Co. Inc.
339 Gil J. Puyat Avenue
Makati, Metro Manila 1200,
PHILIPPINES
TEL: (022) 66-9426
IRAN
MOCO, INC.
No.41 Nike St., Dr.Shariyati Ave.,
Roberoye Cerahe Mirdamad
Tehran, IRAN
MEXICO
TEL: (02) 899 9801
Casa Veerkamp, s.a. de c.v.
Av. Toluca No. 323, Col. Olivar
de los Padres 01780 Mexico D.F.
MEXICO
TEL: (021) 285-4169
As of December 1, 2002 (Roland)
TEL: (55) 5668-6699
1DH
Download from Www.Somanuals.com. All Manuals Search And Download.
|