RCA TV Mount MAF30BKR User Guide

flat panel solutions  
LCD TV Wall Mount  
Installation Manual  
Fits TVs 13"- 27"  
Maximum Load Capacity – 40 lbs. (18 kg)  
Thank you for choosing a Universal Flat  
Panel TV Wall Mount from RCA. This  
mount can be used for all major brands  
of 13" - 27" flat panel TVs, 40 lbs (18  
kg) or under. This wall mount features  
a 0-15-degree tilt, 180-degree pan and  
swivel. Before attempting to mount  
your television set, please remove all  
parts from this package and read the  
installation instructions carefully.  
MAF30BKR  
WARNING: Use of this mount with a TV weighing over 40 lbs. or with a  
screen larger than 27" could cause the mount to fail causing property  
damage and/or personal injury.  
CAUTION:  
This wall mount is intended for use only with the maximum weight of  
18 kg/40 lbs. Use with heavier than the maximum weights indicated may  
result in instability causing possible injury. Follow the installation and  
operation instructions carefully.  
Safety precautions  
Follow these precautions to ensure safe installation and mounting of your flat panel TV.  
1. Be sure you have purchased the correct wall mount for your TV. Recheck the  
size and weight constraints.  
2. Gather all necessary tools before you begin installation. You will need a #3 bit  
Phillips screwdriver, electric drill, drill bit (included), level (integrated level on  
product), stud finder, and hammer (for brick and concrete installations).  
3. It is essential for the wall mount plate to be attached to wall studs.  
(Use a stud finder.)  
4. Use the included hardware for mounting purposes. This hardware has been  
provided to ensure a safe and secure mount.  
5. Hire a licensed electrician to relocate an electrical outlet, if needed.  
6. Be sure to purchase wires long enough to connect the TV to the audio and  
video components in your installation.  
7. We recommend you hire a professional installer, if you have any concerns  
about installing the TV wall mount yourself.  
Keep your sales receipt to obtain warranty parts and service and for proof of  
purchase. Attach it here and record the model number.  
Model No. _____________________________________________________________  
Purchase Date:_________________________________________________________  
Dealer/Address/Phone __________________________________________________  
Specifications  
Model:  
MAF30BKR  
Two-piece, low-profile design  
Description:  
RCA Universal LCD TV Wall  
Mount with Swing Arm Extension  
TV Size Range:  
Max. Load:  
Min. Profile:  
Max. Extension:  
Tilt:  
13" – 27"  
40 lbs. (18kg)  
2.6" (6.6 cm)  
6.2" (15.7 cm)  
+/- 0-15°  
Swivel:  
180°  
VESA Compliant:  
100/100  
Integrated Bubble Level / Cord Management System  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Attaching wall mount plate  
Drywall Installation  
1. Use a stud finder to locate a wood stud where you want to install the mount.  
NOTE: It is required that the wall mount plate be attached to wall studs.  
2. Locate center of stud.  
3. Place the wall mount plate against the wall, with the cord management  
channel towards the bottom. Level it using the bubble guide. Mark the  
locations on the wall where the mount is to be installed.  
4. Drill holes at each marked location using the enclosed wood drill bit.  
5. Secure the wall mount plate to the wall, using one drywall screw, but do not  
completely tighten it yet.  
6. Using the integrated bubble level, carefully adjust the wall mount plate until it  
is level.  
7. Insert the remaining screws and tighten all three screws completely.  
Concrete/Brick Installation  
1. Place the wall mount plate against the wall with the cord management  
channel towards the bottom.  
2. Using the integrated bubble level, mark off the position of the holes that will be  
used for securing the mount.  
3. Place the wall mount plate aside.  
4. Using an electric drill and a 5/16" (8mm) masonry bit, drill holes in the marked  
locations.  
5. Remove any excess dust from the holes.  
6. Insert a concrete anchor into each hole. If necessary, use a hammer to lightly  
tap each anchor into place so they are flush with the wall.  
7. Once all anchors are in place, place the wall mount plate back into position.  
Using the integrated bubble level, carefully adjust the wall mount plate until it  
is level.  
8. Attach the wall mount plate, using the drywall screws provided.  
9. Make sure all screws are tightened and secure.  
Attaching the TV mount plate  
1. Unplug your flat panel TV before starting this step of the installation.  
IMPORTANT: NEVER lay the TV face down as this may cause damage to the  
viewing surface.  
2. Before attaching the TV mount plate to the TV, determine which hardware to  
use. Examine the back of your TV. If the back is flat, use the M4x12mm bolts.  
If your TV has a recessed back, use the longer M4x30mm bolts and 1/2"  
spacers.  
3. After you have determined which bolts to use, attach the TV mount plate to  
the back of your TV.  
NOTE: Be careful not to over-tighten the bolts.  
Attaching the TV mount plate to the wall  
mount plate  
1. To complete the installation, slide the TV mount plate with your TV attached  
into the wall mount plate.  
2. The retainer clip on the top of the wall mount plate should click, indicating that  
the mount is secure.  
3. To remove the TV, push in on the clip and slide the TV mount plate up.  
4. For additional security and stability, insert the security bolt into the hole  
located at the base of the unit.  
5. Tighten, using the Allen Wrench provided.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operation and adjustment  
Your RCA Flat Panel TV Wall Mount features an adjustable 15-degree tilt and  
180-degree pan and swivel action for easy viewing.  
To adjust the tilt:  
1. Locate the adjustment knob directly behind the TV mounting point.  
2. Loosen the knob by turning it counter-clockwise.  
3. Adjust the tilt to the desired level and re-tighten the knob to lock the  
adjustment in place.  
To adjust the swivel:  
1. Simply move the extension arm into the desired position.  
2. If the joint is too tight or too loose, adjust the tightness of the joint.  
3. Locate the knob closest to the wall.  
4. Turn the knob counter-clockwise to loosen and clockwise to tighten.  
Limited Lifetime Warranty  
Audiovox Electronics Corporation (the “Company”) warrants to you the original  
retail purchaser of this product that should it, under normal use and conditions,  
be proven defective in material or workmanship during its lifetime while you own  
it, such defect(s) will be repaired or replaced (at the Company’s option) without  
charge for parts and repair labor.  
To obtain repair or replacement within the terms of this Warranty, the product is to  
be delivered with proof of warranty coverage (e.g. dated bill of sale), specification  
of defect(s), transportation prepaid, to the Company at the address shown below.  
Do not return this product to the Retailer.  
This Warranty does not cover product purchased, serviced or used outside the  
United States or Canada.  
This Warranty is not transferable and does not extend to costs incurred for  
installation, removal or reinstallation of the product. This Warranty does not apply  
if in the Company’s opinion, the product has been damaged through alteration,  
improper installation, mishandling, misuse, neglect, or accident.  
THE EXTENT OF THE COMPANY’S LIABILITY UNDER THIS WARRANTY IS  
LIMITED TO THE REPAIR OR REPLACEMENT PROVIDED ABOVE AND, IN NO  
EVENT, SHALL THE COMPANY’S LIABILITY EXCEED THE PURCHASE PRICE  
PAID BY PURCHASER FOR THE PRODUCT.  
This Warranty is in lieu of all other express warranties or liabilities. ANY IMPLIED  
WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY  
OR FITNESS FOR A PARTICULAR PURPOSE SHALL BE LIMITED TO DURATION  
OF THIS WARRANTY. IN NO CASE SHALL THE COMPANY BE LIABLE FOR ANY  
CONSEQUENTIAL OR INCIDENTAL DAMAGES WHATSOEVER. No person or  
representative is authorized to assume for the Company any liability other than  
expressed herein in connection with the sale of this product.  
Some states/provinces do not allow limitations on how long an implied warranty  
lasts or the exclusion or limitation of incidental or consequential damage so the  
above limitations or exclusions may not apply to you. This Warranty gives you  
specific legal rights and you may also have other rights which vary from state/  
province to state/province.  
U.S.A.: Audiovox Electronics Corporation, 150 Marcus Blvd.,  
Hauppauge, New York 11788  
CANADA: Audiovox Return Center, c/o Genco, 6685 Kennedy Road, Unit 3, Door  
16, Mississauga, Ontario L5T 3A5  
Trademark(s) Registered  
All other brands and product names are trademarks or registered trademarks of  
their respective owners.  
© 2010 Audiovox Accessories Corporation  
MAF30BKR_US_IB_02  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Pyramid Car Audio Microphone RDCAP15 User Guide
Quasar CRT Television SP2724, SP2724U User Guide
RadioLAN Appliance Trim Kit 52TA1472 User Guide
Radio Shack MP3 Player Accessories 12 636 User Guide
Radio Shack Telephone Accessories CE 135 User Guide
RCA Cordless Telephone 2 9917 2 9918 User Guide
RedMax Chainsaw GZ4000 User Guide
RocketFish Video Gaming Accessories RF GDS006 User Guide
Seagate Home Theater System ST336807LW LC User Guide
Sears Saw 9 29012 User Guide