THE LIGHTNING FLASH AND ARROWHEAD
WITHIN THE TRIANGLE IS WARNING
SIGN ALERTING YOU OF "DANGEROUS
VOLTAGE" INSIDE THE PRODUCT.
PLEASE READ AND SAVE THIS FOR FUTURE REFERENCE
FCC information
For your safety
–
–
–
R e o r i e n t o r r e l o c a t e t h e
receiving antenna.
A
This device complies with part 15 of
the FCC Rules. Operation is subject
to the following two conditions: (1)
This device may not cause harmful
interference, and (2) this device must
accept any interference received,
including interference that may
cause undesired operation.
The AC power plug is polarized (one
blade is wider than the other) and
only fits into AC power outlets one
way. If the plug won’t go into the
outlet completely, turn the plug
over and try to insert it the other
way. If it still won’t fit, contact
a qualified electrician to change
the outlet, or use a different one.
Do not attempt to bypass this
safety feature.
IMPORTANT SAFETY INSTRUCTIONS
Increase the separation between
the equipment and receiver.
Connect the equipment into an
outlet on a circuit different from
that to which the receiver is
connected.
C o n s u l t t h e d e a l e r o r a n
experienced radio/TV technician
for help.
Some of the following information
safety. If the provided plug does
not fit into your outlet, consult
an electrician for replacement of
the obsolete outlet.
Protect the power cord from
being walked on or pinched
particularly at plugs, convenience
receptacles, and the point where
they exit from the apparatus.
has been damaged in any way,
THE EXCLAMATION POINT WITHIN THE
TRIANGLE IS A WARNING SIGN ALERTING
YOU OF IMPORTANT INSTRUCTIONS
ACCOMPANYING THE PRODUCT.
SEE MARKING ON BOTTOM / BACK OF PRODUCT
may not apply to your particular
product; however, as with any
electronic product, precautions
s h o u l d b e o b s e r v e d d u r i n g
handling and use.
Read these instructions.
Keep these instructions.
such as power-supply cord or
plug is damaged, liquid has been
spilled or objects have fallen into
the apparatus, the apparatus has
been exposed to rain or moisture,
does not operate normally, or has
been dropped.
USER MANUAL
RS2768i
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER (OR
BACK). NO USERSERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
•
–
WARNING: TO PREVENT FIRE OR
ELECTRICAL SHOCK HAZARD, DO
NOT EXPOSE THIS PRODUCT TO RAIN
OR MOISTURE.
CAUTION: USE OF CONTROLS OR
ADJUSTMENTS OR PERFORMANCE
O F PRO CEDU RES OTHER THA N
THOSE SPECIFIED MAY RESULT IN
HAZARDOUS RADIATION EXPOSURE.
CAUTION: DANGER OF EXPLOSION
I F B AT T E R Y I S I N C O R R E C T LY
REPLACED. REPLACE ONLY WITH
THE SAME OR EQUIVALENT TYPE.
•
•
•
•
•
This equipment has been tested and
found to comply with the limits for
a Class B digital device, pursuant
to part 15 of the FCC Rules. These
limits are designed to provide
reasonable protection against
harmful interference in a residential
installation. This equipment
generates, uses and can radiate
radio frequency energy and, if not
installed and used in accordance
with the instructions, may cause
harmful interference to radio
communications. However, there is
no guarantee that interference will
not occur in a particular installation.
If this equipment does cause harmful
interference to radio or television
reception, which can be determined
by turning the equipment off and
on, the user is encouraged to try to
correct the interference by one or
more of the following measures:
Caution:
Heed all warnings.
WARNING: Changes or modifications
to this unit not expressly approved by
the party responsible for compliance
could void the user's authority to
operate the equipment.
CAUTION: TO PREVENT ELECTRIC
SHOCK, MATCH WIDE BLADE OF
PLUG TO WIDE SLOT, FULLY INSERT.
Follow all instructions.
Do not use this apparatus near
water.
•
•
Only use attachments/accessories A D D I T I O N A L S A F E T Y
This product utilizes a laser. Use
of controls or adjustments or
performance of procedures other
than those specified may result in
hazardous radiation exposure. Do
not open covers and do not repair
yourself. Refer servicing to qualified
personnel.
specified by the manufacturer.
Use only with the cart, stand,
t r i p o d , b r a c k e t , o r t a b l e
specified by the manufacturer,
or sold with the apparatus.
When a cart is used, use caution
when moving the cart/apparatus
combination to avoid injury
from tip-over.
INFORMATION
•
Apparatus shall not be exposed
to dripping or splashing and no
objects filled with liquids, such
as vases, shall be placed on the
apparatus.
•
•
Clean only with dry cloth.
Do not block any ventilation
openings. Install in accordance
w i t h t h e m a n u f a c t u r e r ’s
instructions.
Do not install near any heat
sources such as radiators, heat
registers, stoves, or other
apparatus (including amplifiers)
that produce heat.
Do not defeat the safety
purpose of the polarized
or grounding-type plug. A
polarized plug has two blades
with one wider than the other.
A grounding type plug has two
blades and a third grounding
prong. The wide blade or the
third prong is provided for your
Technical information
Product: 5 Disc Audio System
Brand: RCA
This Class B digital apparatus complies
with Canadian ICES-003.
•
Always leave sufficient space
a r o u n d t h e p r o d u c t f o r
ventilation. Do not place
product in or on a bed, rug, in
a bookcase or cabinet that may
prevent air flow through vent
openings.
Model: RS2768i
•
•
WARNING: MAINS PLUG IS USED Power Supply: 120V ~ 60Hz
AS DISCONNECT DEVICE AND IT
SHOULD REMAIN READILY OPERABLE
DURING INTENDED USE. IN ORDER
T O D I S C O N N E C T T H E M A I N S
PLUG FROM MAINS COMPLETELY,
T H E M A I N S P L U G S H O U L D B E
DISCONNECTED FROM THE MAINS
SOCKET OUTLET COMPLETELY.
Power Consumption: 240 Watts
CLASS 1 LASER PRODUCT
This Audio System has
earned the ENERGY
STAR.
Service information
This product should be serviced
only by those specially trained in
appropriate servicing techniques.
For instructions on how to obtain
service, refer to the warranty in-
cluded in this Guide.
•
•
•
Do not place lighted candles,
cigarettes, cigars, etc. on the
product.
Connect power cord only to AC
power source as marked on the
product.
Portable Cart Warning
•
•
Unplug this apparatus during
lightning storms or when unused
for long periods of time.
Refer all servicing to qualified
service personnel. Servicing is
required when the apparatus
It's important to read this instruction prior to using your new product
for the first time.
This product contains a low
power laser device.
Care should be taken so that
objects do not fall into the product.
-1-
-2-
-3-
-4-
IMPORTANT SAFETY INSTRUCTIONS
Important Information
Getting Started
Getting Started
General Controls
•
•
Do not attempt to disassemble the cabinet. This product does not
contain customer serviceable components.
Main plug is used as disconnect device and it should remain readily operable
during intended use. In order to disconnect the apparatus from the mains
completely, the mains plug should be disconnected from the mains socket
outlet completely.
Using FM and AM antennas
Before you use your audio system, Each speaker has a black/red wire
Connecting speakers
CLOCK – To show time and
enter clock setting mode.
Precautions
Headset safety
Unpacking the system
Installation
To ensure sufficient ventilation,
keep the spacing shown below
free from other surfaces:
Main Unit
•
This compact disc player uses
a laser to read the music on
the disc. The laser mechanism
corresponds to the cartridge
and stylus of a record player.
A l t h o u g h t h i s p r o d u c t
incorporates a laser pick-
up lens, it is completely safe
when operated according to
directions.
•
Have a Blast-Just Not
You should have the following:
you’ll want to make sure both
the FM and AM antennas are po-
sitioned properly. Uncoil the FM
antenna at the back of the unit,
making sure it is fully extended
(you may even want to tape it to
the wall behind the unit if pos-
sible, the higher the better).
and a black/purple wire. When
connecting the speakers, match
the red/purple wires to the red/
purple jacks and the black wires
to the black jacks on the main
unit.
in your eardrums!
M a k e s u r e y o u
•
one main unit (with 2 speak-
ers)
TIMER – To turn the timer on/
off; press and hold to enter the
timer setting mode.
5
C
D
C
H
A
N
G
E
R
CLOCK
DIMMER
DEMO
TIMER
SLEEP
turn down the volume on
the unit before you put on
headphones. Increase the
volume to the desired level
only after headphone are in
place.
Do not play your headset at
high volume. Hearing experts
warn against extended high-
volume play.
•
•
•
one remote control
one AM loop antenna
one user manual
4”
4”
DISC SKIP
IF YOUR PRODUCT OPERATES ON BATTERIES, adhere to the
following precautions:
AUTO
PROG BAND
DIMMER•DEMO – To turn the
feature demonstration on or off;
to adjust display brightness.
SOURCE
4”
4”
A. Do not mix old and new batteries.
B. Do not mix alkaline, standard (carbon-zinc), or rechargeable (NiCd,
NiMH, etc) batteries.
C. Any battery may leak electrolyte or explode if disposed of in fire or
an attempt is made to charge a battery not intended to be recharged.
D. Discard leaky batteries immediately. Leaking batteries can cause skin burns
or other personal injury. When discarding batteries, be sure to dispose of them
in the proper manner, according to your state/provincial and local regulations.
E. Battery shall not be exposed to excessive heat such as sunshine, fire
or the like.
2”
PROGRAM
1
2
Connections
Back view
1. AM loop antenna jack
2. FM pigtail antenna
3. Speaker jacks
•
PLA
Y
EQ
MODE
You’ll also need to connect the AM
antenna loop to the back of the
unit if you listen to AM stations.
Rotate the AM loop antenna for
better reception.
SLEEP – To select the time
interval in minutes before the
unit turns off.
SHUTTLE
•
•
Discs rotate at high speed
inside the player. Do not use
damaged, warped, or cracked
discs.
BASS
Side view
Front view
Push speaker
terminal tab
down to insert
wire.
Release tab to
lock wire in the
terminal.
•
•
If you experience ringing in
your ears, reduce volume or
discontinue use.
You should use with extreme
c a u t i o n o r t e m p o r a r i l y
discontinue use in potentially
hazardous situations.
– To open or close the disc tray.
Do not touch the pick-up
lens which is located inside
the disc compartment. To
keep dust from collecting
on the pick-up lens, do not
leave the compartment door
open for an extended period
of time. If the lens becomes
dirty, clean it with a soft
brush, or use an air blower
brush designed for camera
lenses.
AM loop antenna
(included)
DISC SKIP – To skip to the next
CD in the tray in CD mode.
Speaker
Speaker
ON/STANDBY – To turn power on
or off (STANDBY mode).
NOTE: Make sure the insulation
is completely removed from the
ends of the speaker wires at all
connection points.
(R)
(L)
VOLUME – To increase/decrease
the volume.
AUTO PROG•BAND – To toggle
between AM and FM. Also used
to auto-preset radio stations in
FM mode.
Red & Black
Red & Black Purple &
Black
Purple & Black
Even if your headset is an
open-air designed to let you
to hear outside sounds, do
not turn up the volume so
high that you are unable to
hear what is around you.
Excessive sound pressure from
earphones and headphone
can cause hearing loss.
/
– To tune radio frequency;
to skip CD track; to fast search
through the CD.
SOURCE – To select among CD
player, TUNER, iPod, LINE IN and
AUX sources.
– To play or pause CD.
•
– To stop CD playback.
PROGRAM – To enter program
mode for CD and tuner.
-5-
-6-
-7-
-8-
-9-
General Controls
General Controls
Display
Clock and Timer
Clock and timer
Sound Features
PRESET
previous or next preset stations
in tuner mode.
/
–
To select the
FM ST. – To switch between FM output.
CD tray status:
Lights when loaded
Flashes for the current disc
Animates when playing
the desired volume level.
7. Press TIMER to save settings.
Remote control
Setting the clock
1. Press and hold CLOCK until
the hour flashes on the
display.
Setting the timer
Bass boost
Press BASS to turn on/off
boosting the bass frequency. The
BASS icon lights on the display
on and off modes.
•
•
•
For RADIO timer, tune in to a
desired station.
For CD timer, insert a CD into
the unit.
SHUFFLE – To turn on/off
LINE IN/ AUX – To select the random playback.
Source indication
Activating the timer
Tap TIMER to turn on/off the when it is activated.
For iPod timer, insert your timer. The timer is active when
SHUFFLE – To turn on/off
random playback.
external sound input from LINE
IN/ AUX IN jacks.
MENU – To display iPod menu;
and return to previous menu.
2. Press
/
to set the hour
and then press CLOCK to
shift to minute digits.
Muting audio
PLAY MODE – To cycle between
different play mode.
DISC SKIP – To skip to next CD in
CD mode.
iPod into the connector.
the clock icon
is lit.
SELECT – To confirm iPod menu
lists.
Press
on the remote control
3. P r e s s
minute.
/
t o s e t t h e 1. Press and hold TIMER until
to cut or restore the sound.
ON (timer on time) appears
with the hour flashing.
2. For setting time, press
to set the hour and then
press TIMER to shift to the
minute digits.
Sleep mode
You can select the time interval in
minutes before the unit turns off
automatically.
LINE IN – Ø3.5mm jack for
external audio sources.
VOL+ / VOL– – To increase/
decrease the volume.
4. Press CLOCK to save settings.
INTRO – To turn INTRO mode on
or off to play the first 10 seconds
Using preset equalizer curves
/
Press EQ on the unit to select
among FLAT, ROCK, POP, JAZZ,
CLASSIC and CUSTOM. The dis-
play shows your selection briefly.
AUX IN•L/R – Jacks for external
audio sources.
– To play and pause the of each track.
current CD.
•
•
When system is
ON, you can tap
CLOCK to display
the current time – it will
display time for about 2
seconds.
When the system is OFF
(standby), the display will
turn off to save power.
Playback
mode
status
Folder navigation mode
Radio bands
1. Press SLEEP to select among
OFF, 120, 90, 60, 45, 30, 15, 10
and 5 minutes. The sleep icon
lights on the display when
sleep mode is activated.
2. When sleep is activated, press
SLEEP once to view remaining
sleep time. Press SLEEP again
when the remaining sleep
time is displayed to change
the sleep time.
PRESET – To select previous
3. P r e s s
minute.
/
t o s e t t h e
BASS – To turn BASS on or off.
PREV/ ,NEXT/ – To tune radio / next tuner preset station; to
frequency; to skip CD track; to navigate the iPod menu list.
BASS – bass boost activated
Timer activated
Creating a Custom Curve
1. Press EQ on the unit to select
the CUSTOM mode.
EQ – To select the equalizer
presets.
– To turn power on or off
(STANDBY mode).
PROG – program playback mode STEREO – FM stereo mode acti-
4. Press TIMER to change to
OFF (timer off time) with
hour flashing. Repeat steps
2 & 3 for timer off time
setting.
fast search through the CD.
SLEEP – To select the time
activated
vated
OPEN/CLOSE – To open and interval in minutes before the
SLEEP – sleep mode activated
EQ – preset equalizer activated
–
J a c k f o r c o n n e c t i n g
CD – To select the CD player.
2. While CUSTOM is displayed,
close CD disc tray.
unit turns off.
Display brightness
headphones
press
/
to cycle among
Product Demonstration mode
Press DIMMER•DEMO to turn
on/off demonstration mode. The
demonstration scrolls through all
display operations.
TUNER – To select the tuner and
change the radio band.
1. Press and hold DIMMER•DEMO
for more than 2 seconds.
2. While “DIM” is displayed,
p r e s s D I M M E R • D E M O
repeatedly to select the
desired level (DIM 1–3).
STOP – To stop playing CD.
the displayed BASS and TREB
range levels.
3 . W h i l e B A S S o r T R E B i s
displayed, adjust the volume
to set the associated gain
between -10 - +10.
5. Press TIMER to select the
The remote control
must be inserted with
2 “AAA” batteries
prior to use.
source. Press
/
to select
PLAY MODE – To cycle between
different play mode.
INFO – To select among disc
display information.
among TUNER, CD or iPod.
6. P r e s s TIMER t o s e t t h e
volume. Adjust the timer
•
Sleep is automatically de-
activated when the unit is
turned off.
– To mute and restore audio
iPod – To select iPod playback.
volume by
/
to select
4. Press EQ to exit.
-10-
-11-
-12-
Download from Www.Somanuals.com. All Manuals Search And Download.
-13-
-14-
|