RCA Camcorder CC634 User Guide

CC6 3 4  
USER‘S  
GUIDE  
C A M C O R D E R  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Assistance  
We want to make sure you enjoy your new camcorder. If you have any  
questions, call:  
Camcorder Exchange Warranty............800-283-6503 (pages 78-79)  
Customer Service...........................................800-336-1900 (page 77)  
Accessories...............................................800-338-0376 (pages 64-69)  
Table of Contents  
• Play Back Your Recording................8  
• Turn off the Camcorder.....................8  
Safety Information ..............................i  
Product Registration...........................i  
Table of Contents ............................1-2  
• Review Camcorder’s  
Operating Controls.....................9-10  
Powering Your Camcorder  
First-Time Operation  
• Using Adapter/Charger....................11  
• Using Rechargeable Battery.......12-14  
• Using Optional Car Cord Adapter...15  
• Assistance..........................................3  
• Unpack Camcorder & Accessories....3  
• Attach the Adapter/Charger...............4  
• Insert a Tape ......................................4  
• Open Lens Cover...............................5  
• Adjust Handstrap...............................5  
• Turn on Camcorder............................5  
• Select a Recording Speed ..................6  
• Set the Scene Select AE Dial .............7  
Remote Control  
• Buttons .......................................16-17  
Install Battery Cell...........................18  
• Remote Sensor.................................18  
Traveling Tips...................................19  
• Adjust Viewfinder and  
Video Cassettes............................20-21  
Eyepiece Focus Control...................7  
• Start and Stop Recording...................8  
(continued on next page)  
1
Download from Www.Somanuals.com. All Manuals Search And Download.  
Table of Contents  
Recording  
• Animation and Time-Lapse  
Recording (Remote Only)........50-51  
• Make a Recording ......................22-23  
• Recording Tips ................................24  
• Viewfinder.......................................25  
• Viewfinder Displays...................26-29  
• Tally Light.......................................30  
• Microphone......................................30  
• Flying Erase Head ...........................30  
• Electronic Indexing .........................30  
• Auto Head Cleaner ..........................31  
• Quick Review ..................................31  
• Camera Edit.....................................31  
• Tape Positioning..............................31  
• Time Counter With Memory Stop...32  
• Tape Time-Remaining Display .......33  
• Zooming ..........................................34  
Scene Select AE Dial .......................35  
• White Balance .................................36  
MODE Button..................................37  
• Fading In and Out............................38  
• 16X9 Mode......................................39  
• Focusing (Auto and Manual) .....40-41  
• Exposure Control (Iris)....................42  
• Self-Timer (Remote Only) ..............43  
• Titler...........................................44-45  
• Date and Time Display  
• Audio Dubbing (Remote Only).......52  
• Edit Insert (Remote Only) ...............53  
• Built-in Color Enhancement  
Light .........................................54-55  
• Attaching the Shoulder Strap...........56  
Playback  
• Viewfinder Playback .......................57  
• Visual Searching..............................57  
• Stop-Action Pause ...........................57  
• Tracking...........................................57  
• Using the Cassette Adapter ........58-59  
• Playback on TV (or VCR) With  
AUDIO/VIDEO IN Jacks .........60-61  
• Playback on TV Without  
Audio/Video Inputs..................62-63  
Optional Accessories...................64-69  
• Accessory Order Form ...............67-69  
Trouble Checks ...........................70-73  
Care and Maintenance ...............74-75  
Specifications ....................................76  
Customer Assistance and Service ...77  
Limited Warranty.......................78-79  
Index (Alphabetical) ...................80-81  
• Install the Clock Cell....................46  
• Set the Date and Time..................47  
• Select the Date, Time, or  
Title to Record.......................48-49  
2
Download from Www.Somanuals.com. All Manuals Search And Download.  
First-Time Operation  
This section describes only the basic steps necessary to set up your camcorder to  
record. Refer to the other sections for detailed operation and feature options.  
Assistance  
The toll-free numbers are available to help you with any problem you may encounter.  
Camcorder Exchange Warranty . . . . .800-283-6503  
Customer Service . . . . . . . . . . . . . . . .800-336-1900  
Accessories . . . . . . . . . . . . . . . . . . . .800-338-0376  
1. Unpack the camcorder and accessories.  
• Save the packing materials and box in case you ever need to ship or store  
your camcorder.  
• The items shown below are packed with your camcorder. If any are  
missing or appear damaged, contact your dealer immediately.  
WARNING: NICKEL  
START/STOP  
ZOOM  
SELF  
INT.  
TIME  
TIME LAPSE  
PLAY  
CADMIUM BATTERY  
H
S
REC  
TIME  
U
P
ANIM.  
PAUSE  
STOP  
REW  
T
1
F
FF  
MUST BE RECYCLED  
OR DISPOSED OF  
PROPERLY.  
MO  
D
E
INSERT  
A.DUB  
2
F
Remote Control  
Part No. 221125  
*
Model CC634  
Rechargeable 6-Volt Battery  
Part No. FB1260  
*
Your camcorder may look slightly different  
from the one shown in this manual.  
Caution:  
+
Do not use this  
adapter/charger  
for any purpose  
other than  
P
O
W
ER  
C
H
G
E
N
D
R
E
F
R
E
S
H
Cassette Adapter  
Battery  
(Size "AA" 1.5 Volt)  
Cassette Adapter  
Part No. 232845  
charging the  
FB1260 or  
AC Adapter/Charger  
Part No. 221400  
and Power Connector  
Part No. 220389  
FB120 battery  
pack or supply-  
ing power to  
the camcorder.  
Shoulder Strap  
Part No. ACS091  
Clock and Remote Cells  
3-Volt Micro Lithium Cells  
– such as CR2025 – are  
available from most local  
drug stores and camera  
shops. Use of other cells  
present a risk of fire or  
explosion.  
Cautions: Lithium cell batteries. Must be disposed of properly. Never  
handle punctured or leaking cells. May cause burns or personal injury.  
Keep out of the hands of children. Can cause death or injury if swallowed.  
If swallowed, consult a physician immediately for emergency treatment.  
The lithium cells used in these devices may explode resulting in a fire or  
chemical burn if mistreated. Do not recharge, disassemble, heat above  
212˚F (100˚C), or incinerate.  
Never use metallic tweezers to hold the cell, and never short circuit the +  
and – sides of the cell.  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
First-Time Operation  
To AC 100-  
240V, 50/60 Hz  
Adapter/  
Charger  
Reference Marks  
E
+
B
C
POWER  
CHG  
END REFRESH  
VCR  
POWER  
OFF  
CAMERA  
AUDIO  
POWER  
RF  
DC OUT  
BATT. RELEASE  
VIDEO  
Indicator  
DC OUT Jack  
Power Connector  
C. Plug the adapter/charger’s plug into  
an operating outlet. The adapter/  
charger’s POWER indicator will  
light.  
2. Attach the adapter/charger.  
Since the battery must be charged  
before it can be used the first time,  
attach the adapter/charger to the  
camcorder.  
A. Connect the power connector’s  
small plug into the DC OUT jack  
on the adapter/charger.  
3. Insert a tape.  
• Slide EJECT.  
• Turn the tape wheel on the cassette  
to remove any slack from the tape.  
B. Align the reference mark on the  
power connector with the mark on  
the camcorder. Hold the top of the  
power connector flush against the  
back of the camcorder, and press  
the bottom of the power connector  
down until it locks into place.  
• Insert the cassette with the tape  
wheel facing up and the tape window  
facing out.  
• Press on the area labeled PUSH until  
the cassette door locks into place.  
(continued on next page)  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
First-Time Operation  
EJECT Button  
F1  
EJECT  
O
DE  
Tape Wheel  
F2  
N
A
M
O
T
U
A
LENS  
H
S
U
P
COVER  
Control  
PUSH  
Here to  
Close  
DATE/TIME/CHAR––SET  
T20•30•40  
UNTER R/M  
W.BAL.  
TRACKING  
+
L
PLAY/PAUSE  
STOP  
FF  
REW  
Tape Window  
B
C
VCR  
POWER  
OFF  
CAMERA  
AUDIO  
RF  
DC OUT  
VIDEO  
Handstrap Flap  
POWER Switch and  
Indicator  
Handstrap Velcro Strip  
(Under Flap)  
4. Slide LENS COVER control 6. Place POWER (CAMERA/  
to open lens cover.  
OFF/VCR) switch in  
CAMERA.  
• The power indicator will light and  
the camcorder will enter record  
PAUSE  
5. Adjust the handstrap to fit  
your hand.  
pause.  
appears in the  
• Lift the flap on the handstrap and  
separate the velcro strip.  
viewfinder when the camcorder is in  
record pause.  
• Insert your hand, adjust the strap  
to fit snugly, refasten the strap,  
and close the flap.  
• The position of this switch tells the  
camcorder whether you want to  
record (CAMERA), turn the power  
off (OFF), or play back tapes (VCR).  
• The camcorder will automatically  
turn off if it remains in record pause  
for five minutes. Place POWER in  
OFF and then back in CAMERA.  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
First-Time Operation  
SP•SLP/T20•30•40  
Switch  
DATE/TIME/CHAR––SET  
T20•30•40  
UNTER R/M  
W.BAL.  
TRACKING  
+
L
PLAY/PAUSE  
STOP  
FF  
REW  
B
C
VCR  
POWER  
OFF  
CAMERA  
AUDIO  
RF  
DC OUT  
VIDEO  
7. Select a recording speed and tape length using  
SP•SLP/T20•30•40 switch.  
• Select T20 SLP if you are using a  
tape with 20 minutes or less  
recording time and want to record in  
SLP speed.  
Select SP or SLP recording speed.  
• SP – Standard play provides the best  
picture, but the shortest recording  
time (20 minutes with a TC-20 tape).  
• Select T30 SP if you are using a tape  
with 30 minutes recording time and  
want to record in SP speed.  
• SLP – Extended play provides three  
times the recording time as SP  
(60 minutes with a TC-20 tape).  
SLP has slightly more picture noise  
in normal playback.  
• Select T30 SLP if you are using a  
tape with 30 minutes recording time  
and want to record in SLP speed.  
Set the length of the tape you are using  
so the camcorder can correctly  
calculate the recording time remaining  
on the tape.  
• Select T40 SP if you are using a tape  
with 40 minutes recording time and  
want to record in SP speed.  
Repeatedly press the SP•SLP/  
T20•30•40 switch.  
• Select T20 SP if you are using a tape  
with 20 minutes or less recording  
time and want to record in SP speed.  
• Select T40 SLP if you are using a  
tape with 40 minutes recording time  
and want to record in SLP speed.  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
First-Time Operation  
Electronic Viewfinder  
Eyepiece Focus Control  
H
S
U
P
T
1
F
FULL  
AUT  
O
MODE  
2
F
Scene Select AE Dial  
8. Set the scene select AE dial to  
AUTO.  
9. Adjust the viewfinder and  
eyepiece focus control.  
• Pull out and rotate the viewfinder  
into a comfortable operating  
position.  
• This places the camcorder in the  
AUTO mode. FULL AUTO will  
appear in the side display panel.  
• In the AUTO mode, the fade, 16X9,  
manual focus, exposure, display, and  
titler controls will not operate.  
• Turn the eyepiece focus control to  
adjust the focus of the viewfinder for  
your vision.  
(continued on next page)  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
First-Time Operation  
REW Button  
STOP Button  
DATE/TIME/CHAR––SET  
TRACKING  
T20•30•40  
UNTER R/M  
+
L
PLAY/PAUSE  
W.BAL.  
STOP  
FF  
REW  
PLAY/PAUSE  
B
C
Button  
VCR  
POWER  
OFF  
CAMERA  
AUDIO  
RF  
DC OUT  
VIDEO  
Thumb Trigger  
POWER (VCR/OFF/CAMERA) Switch  
Power Indicator  
• Press PLAY/PAUSE to play back  
the tape in the viewfinder.  
10. Start and stop recording.  
• Press and release the thumb trigger  
to start recording. REC  
• Press STOP when you are finished  
appears in the viewfinder, and the  
tally light will light when the  
camcorder is recording.  
playing back the tape.  
• Details on viewfinder playback are  
on page 57.  
• Press and release the thumb trigger  
again to stop recording. The  
camcorder is now in the record-  
PAUSE  
12. Place the POWER switch in  
OFF to turn off the camcorder.  
The power indicator will turn off.  
pause mode (  
appears in  
the viewfinder).  
11. Play back what you have  
recorded.  
• Place the POWER switch in VCR.  
• Press REW to rewind the tape.  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
First-Time Operation  
13. Review camcorder’s operating controls.  
Power Zoom Lever  
“W” - Wide Angle  
“T” - Telephoto  
Electronic Viewfinder  
Microphone  
Built-in Color Enhancement Light  
Eyepiece Focus Control  
Eyepiece  
Lens  
EJECT Button  
LENS COVER  
Control  
H
S
Cassette Door  
U
P
PUSH here to close.  
T
1
F
Remote  
Control  
Sensor  
MODE  
LIGHT OFF•AUTO•  
ON Switch  
2
F
Scene Select AE Dial  
Tally Light  
Display Panel  
F1 Button  
MODE Button  
F2 Button  
(continued on next page)  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
First-Time Operation  
13. Review camcorder’s operating controls. (continued)  
DATE/TIME/CHAR + and Buttons  
(Also TRACKING Buttons)  
SP•SLP/T20•30•40 Button  
(Also COUNTER R/M Button)  
SET Button  
SP-SLP/T20•30•40 DATE/TIME/CHAR  
SET  
COUNTER R/M  
TRACKING  
MAN.W.BAL (Manual  
White Balance)  
MAN.W.BAL  
EDIT  
SEARCH  
+
REW  
FF  
STOP PLAY/PAUSE  
PLAY/PAUSE Button  
STOP Button  
FF Button  
(Also EDIT SEARCH + Button)  
REW Button  
(Also EDIT SEARCH – Button)  
B (Bright) and C (Color)  
Controls on Bottom of  
Viewfinder  
See Trouble Checks for  
details.  
Shoulder Strap  
Attachment Ring  
DATE/TIME/CHAR––SET  
T20•30•40  
UNTER R/M  
W.BAL.  
TRACKING  
+
L
PLAY/PAUSE  
STOP  
FF  
Clock Cell  
Compartment  
REW  
+
B
C
Attach Battery or  
Power Connector  
for AC Adapter/  
Charger Here  
VCR  
POWER  
OFF  
CAMERA  
AUDIO  
Shoulder Strap  
RF  
DC OUT  
Attachment Ring  
BATT. RELEASE  
Handstrap  
VIDEO  
BATT. RELEASE Button  
Thumb Trigger  
POWER Switch and Indicator  
AUDIO, RF DC OUT, and  
VIDEO Jacks  
(Under Small Cover)  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Powering Your Camcorder  
Using the Adapter/Charger to Power Your Camcorder  
The power connector attaches to the camcorder and lets you power your camcorder  
directly from standard household power. The adapter/charger operates on 100-240  
volts, 50/60 Hz, so it can be used virtually anywhere in the world to power the  
camcorder or recharge the battery.  
To AC 100-240V,  
50/60 Hz  
Power Connector  
E
+
B
C
POWER  
CHG  
END REFRESH  
VCR  
POWER  
OFF  
CAMERA  
AUDIO  
RF  
DC OUT  
BATT. RELEASE  
POWER  
VIDEO  
Indicator  
DC OUT Jack  
BATT. RELEASE Button  
Attach Adapter/Charger  
Remove Adapter/Charger  
1. Plug power connector’s plug into DC  
1. Unplug the adapter/charger from the  
wall outlet.  
OUT jack on adapter/charger.  
2. Align the reference mark on the power  
connector with the mark on the  
2. Press and hold BATT. RELEASE on  
the camcorder while removing the  
power connector.  
camcorder. Hold the top of the power  
connector flush against the back of the  
camcorder, and press the bottom of  
the power connector onto the  
Using an Optional Plug Adapter  
camcorder until it locks into place.  
An optional plug adapter may be required  
in some countries.  
3. Plug the adapter/charger’s plug into  
the nearest AC outlet (100-240V,  
50/60Hz).  
4. If the adapter/charger is properly  
connected, its POWER indicator will  
light.  
Optional AC  
Plug Adapter  
AC 100-240V  
1. Plug the adapter/charger’s plug into  
the AC plug adapter.  
Caution: Do not use this  
adapter/charger for any other purpose  
other than charging the FB1260 or  
FB120 battery pack or supplying  
power to the camcorder.  
2. Plug the AC plug adapter into the  
AC outlet.  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Powering Your Camcorder  
Charging the Battery  
CHG  
Indicator  
Caution  
Hold Battery  
Flush and  
Slide  
When a battery  
is attached to  
the adapter/  
charger, do not  
turn them  
Reference Marks  
POWER  
To AC Wall  
Outlet 100-240  
Volts, 50/60 Hz.  
Indicator  
END  
upside down.  
The battery may  
fall off and be  
damaged or  
Indicator  
POWER  
CHG  
END REFRESH  
REFRESH  
Button  
cause injury.  
REFRESH  
Indicator  
Adapter/Charger  
To Charge the Battery  
Use the REFRESH Button  
If the power connector is attached to the  
DC OUT jack on the adapter/charger,  
remove its plug.  
1. Align reference mark on battery with  
mark on adapter/charger.  
The battery will provide increased  
operation time if you “refresh” it after  
five chargings. The refresh feature  
“refreshes” the battery by completely  
discharging it.  
2. Hold the battery flush against the  
adapter/charger and slide it in the  
direction of the arrow.  
1. Attach battery to adapter/charger.  
2. Press REFRESH. The REFRESH  
indicator will light and the battery will  
begin discharging.  
3. Plug adapter/charger into nearest AC  
outlet (100-240V, 50/60Hz).  
3. When discharging is completed, the  
REFRESH indicator will turn off, and  
the CHG indicator will light. The  
battery will then charge.  
4. If the battery is properly connected, the  
adapter/charger’s CHG (charge)  
indicator will light.  
Note: If you try to charge a battery that  
has not been charged for a long period of  
time, it may take a few minutes for the  
CHG indicator to light.  
4. After the battery is charged, the END  
indicator will light. Remove the  
battery from the adapter/charger.  
5. After the battery is charged, the END  
indicator will light.  
6. Remove the charged battery by sliding  
it off the adapter/charger.  
7. Attach the charged battery to the  
camcorder.  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Powering Your Camcorder  
Using the Battery to Power Your Camcorder  
The battery must be charged as described on the previous page before it can be used the  
first time. Initial charging will take approximately 70 minutes. When fully charged,  
the battery should supply about 55 minutes of operating time (depending on how much  
you use the light, zoom, and pause). Conserve battery power by turning the camcorder  
off during recording breaks.  
Note: The small marker switch on top of the battery is for use as a personal reminder to help  
you remember to recharge the battery. It has no other function.  
Battery Safety Precautions  
Do not short the battery’s  
terminals.  
Reference Marks  
Do not attempt to disassemble  
or modify the battery. There  
L
are no user-serviceable parts  
inside.  
Use the battery only with  
specified adapter/chargers and  
camcorders.  
+
Marker  
Switch  
B
C
VCR  
POWER  
OFF  
CAMERA  
Throwing the battery into a fire  
or exposing to excessive heat –  
over 149ºF (65ºC) could be  
hazardous.  
AUDIO  
RF  
DC OUT  
BATT. RELEASE  
VIDEO  
POWER  
BATT. RELEASE  
Button  
(VCR/OFF/CAMERA)  
Switch and Indicator  
Attach the Charged Battery  
If the power connector is attached to the  
camcorder, remove it before attaching the  
battery. Also, install the lithium clock  
cell before attaching the battery pack.  
Details on page 46.  
the battery down until it locks into  
place.  
3. Place the POWER switch in CAMERA.  
The power indicator will light.  
1. Align the reference mark on the battery  
with mark on back of camcorder.  
Remove the Battery  
2. Hold the top of the battery flush against  
the camcorder and press the bottom of  
Press and hold BATT. RELEASE on the  
camcorder while removing the battery.  
ATTENTION: The RBRC seal on the battery used in your Thomson Consumer  
Electronics product indicates that we are participating in a program to collect and  
recycle Nickel Cadmium batteries throughout the United States. Please call  
1-800-8-BATTERY for information or contact your local recycling center.  
Ni-Cd  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Powering Your Camcorder  
Battery Level Indicator  
The battery level indicator appears in the  
viewfinder and shows you the amount of  
power in the rechargeable battery.  
• As the power is used  
appear.  
and  
• When the battery power is almost gone,  
flashes in the viewfinder. The  
camcorder will turn off automatically  
after a few seconds. Place the POWER  
switch in OFF to turn off the  
camcorder before replacing the battery.  
The battery level indicator will not be  
recorded on the tape when it appears in  
the viewfinder.  
Battery Level Indicator  
in Viewfinder  
• When  
appears, the battery is  
fully charged.  
Battery Care and Storage  
• Recharging takes approximately 70  
minutes depending on the battery’s  
condition.  
• The battery will also provide better  
service if its power is completely  
drained before storing it for long  
periods of time (30 days or more).  
• Refreshing takes approximately 210  
minutes depending on the battery’s  
condition.  
• The battery should be charged in the  
temperature range of 50-95°F (10-35C)  
to prevent damage.  
• After repeated charging and use,  
operation time will gradually decrease.  
When operation time becomes too short  
to be useful, it is time to replace the  
battery.  
• Do not operate the battery at  
temperatures below 32°F (0C) or above  
104°F (40C). The battery may be  
damaged if operated at temperatures  
above 122°F (50C). Operation time  
will decrease at extremely low  
temperatures.  
• If the battery discharging must be  
stopped in the middle, remove the  
battery from the adapter/charger before  
unplugging it from the AC outlet.  
• Store the battery at normal room  
temperature.  
• Let a hot battery cool down before  
attaching it to the adapter/charger.  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Powering Your Camcorder  
Optional Car Cord Adapter  
The optional DCC08 car cord shown on  
page 64 allows you to power your  
camcorder from the cigarette lighter  
socket of a car, truck, or RV. It converts  
12-volts to a 6-volt output.  
Cautions: The DCC08 is designed to be  
used only with vehicles having negative  
ground electrical systems.  
Use only car cord adapter DCC08 with  
this camcorder. Use of any other car  
cord adapter may damage the camcorder  
and void your warranty.  
Note: Consult the installation and operating  
instructions enclosed with the DCC08 for  
complete operating instructions.  
Using the DCC08 Car Cord Adapter  
Cigarette  
Lighter Socket  
POWER Indicator  
Power  
Connector  
+
B
C
VCR  
POWER  
OFF  
CAMERA  
AUDIO  
RF  
DC OUT  
BATT. RELEASE  
VIDEO  
Optional DCC08 Car Cord Adapter  
1. Place the POWER switch in OFF to  
turn off the camcorder. Power  
indicator turns off.  
5. Insert the car cord’s cigarette lighter  
plug into the vehicle’s cigarette lighter  
socket. The POWER indicator on the  
car cord adapter will light.  
2. If the battery is attached to the  
camcorder, remove it.  
6. Place the POWER switch in CAMERA  
to turn on the camcorder. The power  
indicator lights.  
3. Hold the power connector flush against  
the back of the camcorder and press  
the bottom of the power connector  
down until it locks into place as  
shown.  
Caution: Make sure the camcorder’s  
power is turned off before removing the  
car cord’s plug from the cigarette lighter  
socket.  
4. Take the vehicle’s cigarette lighter out  
of the socket.  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Remote Control  
A brief description of the remote button’s functions is given here. Many of the buttons  
perform the same functions as the corresponding controls on the camcorder.  
START/STOP  
6
1
ZOOM  
SELF  
INT.  
TIME  
7
8
TIME LAPSE  
PLAY  
STOP  
REW  
REC  
TIME  
2
ANIM.  
PAUSE  
3
4
5
9
FF  
10  
11  
INSERT  
A.DUB  
1
REW (Rewind) Button  
4
ZOOM (T and W) Buttons  
Camcorder’s POWER switch in  
CAMERA:  
Camcorder’s POWER switch in  
CAMERA:  
• Press T to move the lens in the  
telephoto (close-up) direction.  
• Press W to move the lens in the  
wide-angle direction.  
• When the camcorder is in record  
pause, press and hold REW to  
visually search the tape in reverse.  
Release REW to return to record-  
pause.  
2 PLAY Button  
Camcorder’s POWER switch in VCR:  
Press PLAY when the camcorder’s  
POWER switch is in VCR to begin  
playback.  
• When the camcorder is stopped,  
press REW to rewind the tape.  
Press STOP to stop rewinding tape.  
3
STOP Button  
• When a tape is playing, press and  
release REW to visually search the  
tape in reverse. Press PLAY to  
return to normal playback. For  
brief searching, press and hold  
REW for at least two seconds to  
visually search in reverse. Release  
REW to return to normal playback.  
When the camcorder’s POWER  
switch is in VCR, press STOP to stop  
playback, rewind, or fast-forward  
operation.  
(continued on next page)  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Remote Control  
5
INSERT Button  
10  
FF (Fast Forward) Button  
Used for dubbing video. See page 53.  
Camcorder’s POWER switch in  
CAMERA:  
6
START/STOP Button  
• With camcorder in record pause,  
press and hold FF to visually  
search forward on the tape.  
Release FF to return to record  
pause.  
When the POWER switch is in  
CAMERA, press START/STOP to  
start and stop recording.  
Note: If the camcorder is left in record  
pause for more than five minutes, power  
will turn off.  
Camcorder’s POWER switch in  
VCR:  
SELF INT. (Interval)/ TIME  
Button  
7
8
• When the camcorder is stopped,  
press FF to fast forward the tape.  
Press STOP to stop forwarding the  
tape.  
When the POWER switch is in  
CAMERA, press to activate the self-  
timer or select an amount of interval  
time for interval recording.  
• When a tape is playing, press and  
release FF to visually search  
TIME LAPSE ANIM. (Animation)  
REC/TIME Button  
forward on the tape. Press PLAY  
to return to normal playback. For  
brief searching, press and hold FF  
for at least two seconds to visually  
search forward. Release FF to  
return to normal playback.  
When the POWER switch is in  
CAMERA, press to set amount of  
recording time for interval and  
animation recording.  
11  
A. (Audio) DUB Button  
9
PAUSE Button  
Used for dubbing audio. See page 52.  
During playback, press PAUSE to  
produce a stop-action picture. Press  
PLAY to return to normal playback.  
Caution: Pause is designed for  
momentary interruptions and  
should not be used for an extended  
period of time. If the camcorder  
remains in pause for more than five  
minutes, it will automatically enter  
the stop mode and then turn off.  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Remote Control  
Install Lithium Cell  
The remote’s lithium cell is packed separately. Install it as follows:  
Holder  
Back of  
Remote Control  
Insert Pencil Here  
Lithium Cell  
Cautions: Lithium cell battery. Replace only with 3-volt lithium cell – such as CR2025.  
Use of other cell presents a risk of fire or explosion. Must be disposed of properly. Never  
handle punctured or leaking cell. May cause burns or personal injury.  
Keep out of the hands of children. Can cause death or injury if swallowed. If swallowed,  
consult a physician immediately for emergency treatment.  
The lithium cell used in this device may explode resulting in a fire or chemical burn if  
mistreated. Do not recharge, disassemble, heat above 212˚F (100˚C), or incinerate.  
Notes: Never place anything heavy on top of  
the remote control or lay it upside-down.  
1. Turn remote over, insert a pencil or  
paper clip in small hole and remove  
Replace battery when camcorder fails to  
battery holder.  
respond to remote.  
2. Insert battery in battery holder so  
positive (+) terminal faces up.  
Remove battery from remote if it will not be  
used for a month or more. This will prevent  
possible damage from battery leakage.  
If leakage occurs, wipe up liquid inside  
compartment and replace battery.  
3. Replace battery holder in remote until  
it clicks into place.  
Remote Sensor  
The remote operates the camcorder by infrared light, so it is protected from electrical  
and sound interference. However, the remote must be aimed directly at the  
camcorder’s remote sensor. There cannot be any obstructions between them.  
H
S
U
P
A
O
T
1
F
MODE  
AE  
scene select  
2
F
Remote Control Sensor  
Note: The camcorder may not respond to the remote if its sensor is exposed to direct  
sunlight or strong artificial light.  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Traveling Tips  
• Write down your camcorder’s serial  
number and keep it separate from the  
camcorder when traveling. If your  
camcorder is lost or stolen, you will be  
able to identify it.  
• Make sure you have any plug adapters  
that you may need before taking your  
camcorder to other countries. Consult  
your dealer for advice.  
• Carry your camcorder in a carrying  
case when traveling. See page 64 for a  
case designed especially for this  
camcorder. An ordinary suitcase or  
carry bag does not offer the protection  
your camcorder needs. Treat your  
camcorder as carry-on luggage to  
protect it from rough handling.  
• Use extra care to avoid damage to your  
camcorder and accessories when  
operating them at a beach or pool.  
Spray, sand, and dust should be  
avoided. If your lens has been exposed  
to the elements, clean it only with  
proper lens cleaning supplies.  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Video Cassettes  
We recommend that our cassettes be used with your camcorder. Use of poor quality  
tapes or tapes that have been damaged or mishandled can contaminate the video heads,  
resulting in a snowy picture or no picture at all during playback. Because there is no  
control over the type of tape purchased or rented by consumers, head cleaning is not  
covered under warranty. It is considered normal maintenance.  
The automatic head-cleaning system minimizes the need for accessory cleaners or  
cleaning by a Servicenter. This system is activated whenever you insert or remove a  
cassette.  
Erase Protection – Safety Tab  
You can use your video cassettes over and over again. To erase a previous recording,  
just record over it.  
Safety  
Tab  
A. Remove  
safety tab.  
B. Cover hole  
with vinyl tape to  
record over tape.  
Recording and Playback Speeds and Times  
The camcorder records and plays back in standard speed (SP) or extended play (SLP).  
Select the recording speed and tape length using the SP•SLP/T20•30•40 switch. The  
selected speed and tape length will be displayed in the viewfinder. Listed below are the  
maximum SP and SLP recording times for popular VHS-C cassettes.  
• SP – Standard play provides the  
best picture (less picture noise),  
but the shortest recording time  
Recording Time  
Cassette  
TC-20  
TC-30  
TC-40  
SP  
SLP  
60 Min.  
90 Min.  
120 Min.  
(20 minutes with a TC-20 tape).  
20 Min.  
30 Min.  
40 Min.  
• SLP – Extended play provides  
three times the recording time as  
SP (60 minutes with a TC-20  
tape). SLP has slightly more  
picture noise than SP in normal  
playback. This may not be  
noticeable.  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Video Cassettes  
Inserting and Removing Cassettes  
Caution:  
EJECT Button  
Insert the  
cassette only  
one way with  
the tape wheel  
facing up and  
the tape win-  
dow facing  
out. The  
F1  
EJECT  
ODE  
Tape  
Wheel  
F2  
N
A
M
O
T
U
A
H
S
U
P
cassette should  
slide easily  
into the com-  
partment. Do  
not force the  
cassette.  
PUSH  
Here to  
Close  
Cassette  
Compart-  
ment  
Safety  
Tab  
Tape  
Window  
Before inserting a cassette, turn the tape  
wheel on the side of the cassette in the  
direction shown to remove any slack in  
the tape.  
1. Attach a power supply. Then slide and  
release EJECT to open the cassette  
compartment.  
2. Insert or remove the cassette.  
3. Close the cassette compartment door  
by pressing on the area labeled PUSH  
until it locks into place.  
Tape Wheel  
Cassette Care and Storage  
• Keep dust from entering the cassette  
compartment. All dust is abrasive and  
will cause excessive wear on the tape  
and the camcorder’s recording or  
playback heads.  
• Do not use cassettes with damaged or  
spliced tape.  
• Do not use a cassette if it has been  
damaged or exposed to moisture. The  
tape may jam and/or damage your  
camcorder.  
• When you are finished with a cassette,  
rewind it, remove it from the  
camcorder, and label it.  
• Store cassettes vertically in their  
protective cases at normal room  
temperatures. Do not leave your  
camcorder or cassettes in a car or  
outdoors for an extended period.  
Excessive heat or cold may damage  
your cassettes.  
• Keep the cassette away from strong  
magnetic fields such as electric motors  
and other devices.  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Recording  
Making a Recording  
The steps below tell you how to make a recording and suggest using some of the  
recording features. Each feature is described in detail on the following pages.  
Eyepiece  
SP•SLP/T20•30•40Button  
Focus  
Control  
EDIT SEARCH – Button  
EDIT SEARCH + Button  
DATE/TIME/CHAR––SET  
T20•30•40  
TRACKING  
UNTER R/M  
+
PLAY/PAUSE  
W.BAL.  
STOP  
FF  
REW  
LENS COVER Control  
B
C
Power Zoom  
Button  
VCR  
POWER  
OFF  
CAMERA  
EJECT  
Button  
AUDIO  
RF  
DC OUT  
VIDEO  
H
S
POWER Switch  
and Indicator  
U
P
LIGHT  
T
1
F
OFF •  
AUTO•  
ON  
MODE  
2
F
Switch  
Tally Light  
Scene  
Select AE  
MODE, F1, and  
F2 Buttons  
Dial  
1. Attach a power supply.  
4. Place the POWER (CAMERA/  
OFF/VCR) switch in CAMERA.  
Attach the adapter/charger, charged  
battery, or optional DC car cord.  
The power indicator will light and the  
camcorder will enter record pause.  
2. Insert a tape.  
PAUSE  
appears in the viewfinder.  
• Slide EJECT.  
5. Adjust the viewfinder and eyepiece  
focus control for your vision.  
• Turn the tape wheel on the cassette  
to remove any slack from the tape.  
6. Select a recording speed and tape  
length using the SP•SLP/T20•30•40  
switch.  
• Insert the cassette with the tape  
wheel facing up and the tape window  
facing out.  
• Select SP or SLP recording speed.  
3. Slide the LENS COVER control to  
• Set the length of the tape you are  
using (T20, T30, or T40) so the  
camcorder can correctly calculate  
time remaining.  
open the lens cover.  
22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Recording  
7. Place the LIGHT OFF•AUTO•ON  
9. Start and stop recording.  
switch in AUTO.  
• Press and release the thumb trigger  
to start recording. REC  
appears in the viewfinder and the  
tally light will light when the  
camcorder is recording.  
The light will turn on automatically  
when you need more light.  
8. Set the scene select AE dial.  
• Place the dial in AUTO to place the  
camcorder in the AUTO mode.  
• Press and release the thumb trigger  
again to stop recording. The  
• Place the dial in ( ) sports  
camcorder is now in record pause.  
PAUSE  
or (  
) fast speed shutter to record  
appears in the viewfinder.  
fast moving action.  
• The camcorder will automatically  
turn off if it remains in record pause  
for five minutes. Place the POWER  
switch in OFF and then back in  
CAMERA.  
• Place the dial in ( ) back light  
or ( ) front light to compensate  
for unusual lighting situations.  
• Place the dial in ( ) spotlight to  
create the effect of the subject being  
in a spotlight.  
10. Use the zoom feature.  
• Zoom in and out using the power  
zoom T and W lever.  
• Place the dial in ( ) portrait to  
create the effect of the subject being  
in a frame.  
11. Review what you have recorded.  
• Press and release EDIT SEARCH –  
to review the last few seconds of the  
recording.  
• Place the dial in (  
) sepia to create  
the effect of an old movie.  
• Press and hold EDIT SEARCH – or  
+ to visually see what you have  
recorded. Release the button to  
begin recording at that point.  
• Place the dial in MAN and  
experiment with the MODE and F1  
and F2 buttons.  
• Select F1 FADE to fade in and out  
of scenes.  
• Select F2 16X9 to record using the  
16X9 format.  
• Select F1 FOCUS to manually  
focus.  
• Select F2 EXPOSURE to adjust  
the iris (brightness).  
• Select F1 TITLE to select and  
record one of the preset titles.  
Select F2 DISPLAY to display and  
record the date, time and date, or  
create and record your own title.  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Recording  
Recording Tips  
• Fading in and out of scenes will make  
your videos appear more professional.  
• In case of fire or theft, make a video  
recording of your home and contents to  
store in a safe place.  
• When recording fast-moving action in  
outdoor light that you plan to view in  
stop-action or slow motion on a 3-5  
head VCR, place the scene select AE  
dial in sports ( ) or shutter ( ) to  
increase the shutter speed.  
• Try to make sure indoor scenes are  
well-lit. Use the built-in light. This  
improves picture quality and color  
reproduction.  
• Do not move the camcorder rapidly  
from side-to-side while recording.  
A steady, gradual “pan” avoids  
blurring and “jitter”.  
• Be aware of video and audio  
backgrounds. Background details  
barely noticed while you are taping  
may show up as visual “clutter” on  
your recording. Background noises  
(especially TV sets, radios, household  
appliances, traffic sounds, etc.) can  
detract from the sound you want to  
record.  
• Use the viewfinder to make sure the  
camcorder is level while recording or  
your scenes will appear “tilted”.  
• Do not bump or tap the camcorder’s  
microphone while recording because  
this sound will be recorded.  
• Avoid long “still” shots of landmarks  
and scenic attractions. Recordings are  
more interesting if they include people  
and details. “Local color” will give  
travel videos lasting appeal. Consider  
recording a familiar or landmark scene  
from an unfamiliar vantage point.  
• Include close-ups when taping family  
outings or group functions.  
24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Recording  
Viewfinder  
The camcorder’s viewfinder is a miniature monitor that displays the picture  
seen by the camcorder when recording.  
Viewfinder  
Eyepiece Focus Control  
L
+
B
C
VCR  
POWER  
OFF  
CAMERA  
AUDIO  
RF  
DC OUT  
BATT. RELEASE  
VIDEO  
Adjust Viewfinder for Convenient  
Viewing  
Eyepiece Focus Control  
The eyepiece focus control lets you set  
the focus of the viewfinder for your  
personal vision. If you wear eyeglasses,  
you probably can operate the camcorder  
without them.  
For convenient viewing, you can slide the  
viewfinder out from the camcorder and  
rotate it up and down.  
Cautions  
It is easiest to set the correct focus by  
focusing on one of the viewfinder’s on-  
screen displays.  
Do not force the viewfinder to rotate  
completely around. This will damage  
the viewfinder and/or the camcorder.  
Look through the viewfinder and adjust  
the eyepiece focus control for your vision.  
When carrying the camcorder with the  
shoulder strap, put the viewfinder in  
and down. This helps prevent possible  
damage to the viewfinder from  
bumping against your body as you  
move.  
The eyepiece focus control does not affect  
the focus of the picture actually recorded  
by the camcorder.  
25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Recording  
Viewfinder Displays  
6
7
5
1
T
8
9
SP  
T 30  
30MIN  
M 0:00:00  
2
SPORTS  
LENS COVER  
10  
11  
12  
W
3
4
HAPPY HOLIDAYS  
AM 10 : 55  
DEC 25.96  
1
4
Zoom Level  
Date, Date/Time, or Created Title  
This indicator tells you whether you  
are zoomed in or zoomed out.  
Details are on page 34.  
The date, AUTO DATE, date and  
time, or title you created appears in  
this area of the viewfinder.  
• These displays will be recorded on  
your tape when they appear.  
2
3
Exposure Indicator Bar  
This indicator appears when you are  
adjusting brightness manually.  
Details are on page 42.  
Details are on pages 48-49.  
5
Battery Level Indicator  
This indicator shows how much  
power is left in the rechargeable  
battery.  
Preset Title  
• The preset title you select will  
appear in this area.  
• This indicator flashes when the  
battery is almost empty.  
• This title will be recorded on your  
tape when it appears.  
Details are on page 14.  
Details are on pages 44 and 48-49.  
26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Recording  
6
9
Scene Select AE  
Cassette Warning  
• The indicator flashes when the  
POWER switch is set to CAMERA  
and the safety tab has been  
removed from the cassette.  
• The indicator for the mode selected  
with the scene select AE dial  
appears here.  
• The indicator and mode both  
appear briefly when the mode is  
selected, and then only the  
indicator appears.  
• The  
indicator also flashes  
when the POWER switch is set to  
CAMERA and there is no cassette  
in the camcorder.  
Details are on page 35.  
7
10  
11  
Time Remaining, Tape Length  
and Tape Speed (SP or SLP)  
LENS COVER  
When you turn on the camcorder,  
this indicator briefly flashes to  
remind you to open the lens cover.  
Time Remaining: The approximate  
time remaining on the tape in the  
camcorder is automatically  
displayed. The correct tape length  
must be set.  
Manual Focus  
Manual Focus Indicators (  
appear when focus is adjusted  
manually.  
)
• The time-remaining indicator will  
start flashing when the remaining  
tape time reaches two minutes.  
Manual Focus Lock Indicators  
(
) appear when manual focus is  
Details are on page 33.  
locked.  
Tape Length: The length of the  
tape in the camcorder (T20, T30, or  
T40) selected with the SP•SLP/  
T20•30•40 switch appears here.  
Low-Contrast Indicators (  
flash when the auto-focus system  
cannot focus properly.  
• Details are on pages 40-41.  
)
Details are on page 33.  
12  
Lithium Cell (  
)
Recording Speed: The recording  
speed (SP or SLP) selected with the  
SP•SLP/T20•30•40 switch appears  
here.  
This indicator appears when the  
clock cell has not been installed or  
it needs to be replaced.  
Details are on page 46.  
Details are on pages 20 and 33.  
8
Elapsed Time-Counter with  
Memory Stop  
The time counter appears during  
playback. It is not recorded on the  
tape.  
• An “M” appears in front of the time  
counter when memory-stop is on.  
Details are on page 32.  
27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Recording  
Viewfinder Displays (continued)  
15  
F2  
REC  
16X9  
PAUSE  
F1  
FADE  
16  
17  
18  
19  
20  
MWB  
INDEX  
FADE  
13  
1 4S  
5MIN  
14  
14  
13  
Dew Warning (  
)
White Balance  
The dew indicator appears when  
excessive moisture (condensation)  
has entered the camcorder. The  
camcorder will not operate when  
this indicator appears. Place the  
camcorder in a warm, dry area until  
this indicator disappears. When the  
dew indicator disappears, the  
camcorder will operate.  
The indicator for the manual white  
balance selected with the  
MAN.W.BAL (manual white  
balance) button appears here.  
• No indicator appears for automatic  
white balance.  
Details are on page 36.  
28  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Recording  
with  
or  
when the camcorder  
15  
MODE Features (F1 and F2)  
is paused during dubbing.  
• The scene select AE dial may not  
be in AUTO to use these features.  
19  
Self-Timer and Interval Time  
• The F1 and F2 features selected  
with the MODE button appear here.  
15S,  
30S, 1MIN, or  
5MIN appears during self-timer  
recording. Details are on page 43.  
• Details are on page 37.  
• The length of time between  
recordings during time-lapse  
recording appears here. Details are  
on pages 51.  
16  
Status Displays  
• The REC  
here when the camcorder is  
recording.  
indicator appears  
PAUSE  
• The  
indicator appears  
20  
Recording Time  
when the camcorder is in record  
pause.  
• The  
indicator and length of  
time the camcorder will record  
during animation and time-lapse  
recording appears here.  
TAPE END appears when the end  
of the tape is reached during  
recording or a cassette is inserted  
with its tape already at the end.  
Details are on pages 50-51.  
17  
INDEX and FADE  
• INDEX flashes when an index mark  
is being recorded. Details are on  
page 30.  
FADE appears when you press the  
F1 button to select the fade feature  
and flashes when fade is activated.  
Details are on page 38.  
18  
Edit Insert and Audio Dub  
appears during audio dubbing.  
Details are on page 52.  
appears during edit insert.  
Details are on page 53.  
• The pause indicator ( ) appears  
29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Recording  
Microphone  
H
S
U
P
T
1
F
MODE  
2
F
Tally Light  
Tally Light  
The tally light lights when the camcorder  
is recording.  
Electronic Indexing  
An index mark is automatically recorded  
at the beginning of a recording after the  
date advances and a cassette is inserted.  
When you play back the indexed tape in  
a VCR that has a compatible indexing  
Microphone  
The microphone picks up the sound  
during a recording. It is more sensitive to feature called “VHS Index Search  
sounds coming from the direction the  
lens is pointed.  
System”, the invisible marks can be  
located automatically. See VCR owner’s  
manual.  
Flying Erase Head  
INDEX flashes in the viewfinder when an  
A separate erase head is mounted on  
the spinning headwheel (hence the term  
“flying”). This allows you to make clean  
edits without the “glitches” or “rainbow  
noise” that may occur at the beginning or  
the end of recordings.  
index mark is recorded.  
INDEX  
Note: No other function can be performed  
during index recording.  
30  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Recording  
START/STOP Button  
START/STOP  
REW and  
FF (Also  
EDIT  
SEARCH –  
and +)  
ZOOM  
SELF  
INT.  
TIME  
DATE/TIME/CHAR––SET  
TRACKING  
T20•30•40  
UNTER R/M  
TIME LAPSE  
PLAY  
+
PLAY/PAUSE  
W.BAL.  
STOP  
FF  
REW  
FF  
Button  
REC  
TIME  
+
B
C
ANIM.  
STOP  
REW  
PAUSE  
Buttons  
VCR  
POWER  
OFF  
FF  
CAMERA  
REW  
Button  
AUDIO  
INSERT  
A.DUB  
RF  
DC OUT  
BATT. RELEASE  
VIDEO  
POWER Switch in  
CAMERA  
Auto Head Cleaner  
Camera Edit Feature  
The camcorder has an automatic head-  
cleaning system. Whenever a cassette is  
inserted or removed, this system is  
activated.  
The camera edit feature allows you to  
position the tape when the camcorder is  
in record pause. Place POWER switch in  
CAMERA.  
The head-cleaning system minimizes the  
need for accessory cleaners or cleaning  
by a Servicenter.  
• Press and hold EDIT SEARCH – (REW  
on remote) to visually search the  
recorded tape in reverse.  
• Press and hold EDIT SEARCH +  
(FF on remote) to visually search  
forward on the recorded tape.  
Quick Review Feature  
Press and release EDIT SEARCH – (REW  
on remote) when the camcorder is in  
record pause to review the last few  
seconds of a recording. The POWER  
switch must be in CAMERA.  
Release the button to return camcorder to  
record pause at that point on the tape.  
Press the thumb trigger (START/ STOP  
on remote) to start recording at this point.  
The camcorder will play back the last  
few seconds of the recording, return the  
tape to its previous position, and return to  
record pause.  
Tape Positioning  
Place POWER switch in VCR and press  
STOP.  
• Press and quickly release REW or FF to  
rewind or fast-forward the tape. Press  
STOP to stop the tape.  
31  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Recording  
Time Counter  
The time-counter display shows the actual time elapsed when playing back a segment  
of a prerecorded tape. The memory-stop feature helps locate a certain point on the  
tape. When memory stop is on, the tape will stop automatically during rewind or fast  
forward when the time counter reaches M 0:00:00.  
M 0:00:00  
COUNTER  
R/M Button  
STOP  
Button  
DATE/TIME/CHAR––SET  
T20•30•40  
TRACKING  
UNTER R/M  
+
PLAY/PAUSE  
W.BAL.  
STOP  
Time Counter With  
Memory Stop Turned On  
FF  
REW  
REW  
Button  
B
C
VCR  
POWER  
OFF  
CAMERA  
AUDIO  
RF  
DC OUT  
BATT.
VIDEO  
Thumb Trigger  
POWER Switch  
To Use the Memory-Stop Feature  
3. Continue to play the tape. When you  
want to return to the place you marked,  
press the STOP button.  
1. Locate the place on the tape you want  
to return to, place the POWER switch  
in VCR, and press COUNTER R/M for  
more than two seconds to reset the  
counter to 0:00:00.  
4. Press REW. The tape will rewind to  
the time counter reading of M 0:00:00.  
2. Press COUNTER R/M for less than  
one second to turn the time counter’s  
memory-stop feature on or off. When  
memory stop is on, an M appears  
before the time counter in the  
viewfinder.  
32  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Recording  
Tape Time-Remaining Display  
The approximate time remaining on the tape in the camcorder is automatically  
displayed in the viewfinder. The SP•SLP/T20•30•40 switch must be set for the correct  
recording speed and tape length before the camcorder can correctly calculate time  
remaining.  
30MIN  
30MIN T30 SP  
29MIN  
SP•SLP/T20•30•40 Switch  
TAPE END  
3MIN  
2MIN  
(Flashing)  
DATE/TIME/CHAR––SET  
T20•30•40  
Time Counter With  
TRACKING  
UNTER R/M  
+
PLAY/PAUSE  
W.BAL.  
STOP  
1MIN  
(Flashing)  
FF  
REW  
Memory Stop Turned On  
B
C
0MIN  
(Flashing)  
VCR  
POWER  
OFF  
CAMERA  
AUDIO  
RF  
DC OUT  
BATT.
VIDEO  
Set the Recording Speed and Tape Length  
Before recording, repeatedly press the  
SP•SLP/T20•30•40 switch to select the  
recording speed and length of tape you  
are using.  
• Select T30 SLP if you are using a tape  
with 30 minutes recording time and  
want to record in SLP speed.  
• Select T40 SP if you are using a tape  
with 40 minutes recording time and  
want to record in SP speed.  
• Select T20 SP if you are using a tape  
with 20 minutes or less recording time  
and want to record in SP speed.  
• Select T40 SLP if you are using a tape  
with 40 minutes recording time and  
want to record in SLP speed.  
• Select T20 SLP if you are using a tape  
with 20 minutes or less recording time  
and want to record in SLP speed.  
Notes: The time-remaining indicator will  
start flashing when the remaining tape time  
reaches two minutes.  
• Select T30 SP if you are using a tape  
with 30 minutes recording time and  
want to record in SP speed.  
TAPE END appears when the tape reaches its  
end during recording or a cassette is loaded  
whose tape is already at its end.  
33  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Recording  
Zooming  
The motorized zoom lens allows you to zoom in and out for close ups or  
wide-angle shots just by sliding the power zoom lever on the camcorder  
or pressing ZOOM T or W on the remote.  
Power Zoom Lever  
T = Telephoto  
W = Wide Angle  
Power ZOOM Buttons  
T = Telephoto  
W = Wide Angle  
START/STOP  
ZOOM  
SELF  
INT.  
TIME  
H
S
TIME LAPSE  
PLAY  
U
P
T
REC  
TIME  
1
F
ANIM.  
STOP  
REW  
PAUSE  
MODE  
2
F
FF  
INSERT  
A.DUB  
Power Zooming  
• To move the lens in the telephoto (close-  
up) direction, slide the power zoom  
lever toward T (or press ZOOM T on the  
remote).  
T
W
• To move the lens in the wide angle  
direction, slide the lever toward W (or  
press ZOOM W on remote).  
Zoom Level Indicator  
in Viewfinder  
Zoom speed varies according to how far  
you zoom in or out. The zoom level  
indicator appears in the viewfinder.  
34  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Recording  
Scene Select AE Dial  
The scene select AE dial lets you select one of several different effects. Turn the dial  
to select the effect you want. The indicator for the effect will appear in the viewfinder.  
Set the dial to MAN for normal recording.  
H
S
U
P
T
1
F
MODE  
Scene Select AE Dial  
2
F
Mode  
Indicator Uses  
Places camcorder in full auto mode. 16X9, FADE,  
FOCUS, EXPOSURE, DISPLAY, TITLE, and MAN.W.BAL  
will not operate in this mode.  
A
AUTO  
Use this mode for normal recording.  
M
MAN  
Use when playing back recording on a VCR featuring  
special effects, such as pause or slow motion. Uses high  
shutter speeds to clearly capture fast-moving action with  
less blurring.  
Sports  
Use when the subject is in front of a window or with the  
sun to his back. Compensates for subject appearing too  
dark because of backlighting.  
Back-Light  
Front-Light  
Use when there is a strong front light on the subject such  
as spotlights. Compensates for subject appearing too light  
because of strong front lighting.  
High Speed  
Shutter Speed  
Sets shutter speed to 1/2000.  
Use to record fast-moving action with less blurring. Can  
capture faster action than sports mode. Use outdoors and  
in well-lit situations when playing back recording on VCR  
featuring special effects, such as pause or slow motion.  
Spotlight  
Use to give the effect of the subject being in a spotlight.  
Outer edges fade to black.  
Gives the effect of the subject being framed. Outer edges  
are white while center subject remains clear.  
Portrait  
Sepia  
Picture is recorded in sepia (brownish red) and offers the  
vintage look of old movies. Use it with the 16X9 mode to  
create an authentic movie theater look. See page 39.  
35  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Recording  
White Balance  
Making colors look natural is what white balance is all about. This is achieved by  
adjusting the way the camcorder “sees” and records the light source in the scene you  
wish to record. Your camcorder is equipped with automatic white balance. However,  
under certain conditions, such as recording an object with various shades of the same  
color or when recording a predominant red or brown object outdoors, you may want to  
adjust white balance manually.  
Press  
MAN.W.BAL  
(Manual  
White  
Balance) to  
Display in  
Viewfinder  
Auto White Balance  
Outdoors — Cloudy  
Outdoors — Sunny  
MAN.W.BAL Button  
E/CHAR––SET  
KING  
DATE/TIM  
T20•30•40  
UNTER R/M  
W.BAL.  
AC  
TR  
+
PLAY/PAUSE  
STOP  
FF  
REW  
MWB  
B
C
VCR  
POWER  
OFF  
CAMERA  
AUDIO  
RF  
DC OUT  
VIDEO  
Halogen or Tungsten  
Light  
Manual White Balance  
To Adjust White Balance  
Note: It may help to connect your  
camcorder to a color TV monitor when  
making white balance adjustments.  
1. Place the POWER switch in CAMERA,  
and make sure the scene select AE dial  
is not set to AUTO.  
A.Point camcorder at a white, flat  
object such as a piece of paper.  
Adjust the focus manually.  
2. Press MAN.W.BAL (manual white  
balance) until one of the manual white  
balance indicators appears in the  
viewfinder.  
B. Press and hold MAN.W.BAL for at  
least three seconds. The MWB  
indicator flashes while adjusting  
and stops when finished.  
• Select  
when recording outdoors  
on a cloudy day.  
• Select  
when recording outdoors  
3. To have camcorder automatically  
control white balance, repeatedly  
press MAN.W.BAL until no white  
balance indicator appears in  
on a sunny day.  
• Select  
when recording using  
halogen or tungsten lighting.  
• Select MWB when shooting subjects  
with different color temperatures  
and adjust the white balance as  
follows:  
viewfinder (or place scene select AE  
dial in AUTO).  
36  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Recording  
MODE Button  
F1  
F2  
16X9  
FADE  
H
S
U
P
O
T
1
F
MODE  
2
F
F1  
x
FADE  
FOCUS  
0
2
1
H
N
S
FULL  
AUTO  
TITLE  
A
U
M
MODE  
16X9  
P
O T  
EXPOSURE  
DISPLAY  
U
A
F2  
When the scene select AE dial is in any position except AUTO, you can select  
any one of six functions using the MODE, F1, and F2 buttons. Repeatedly  
press MODE to select a function. The functions selected appear in the display  
panel beside the F1 and F2 buttons and in the viewfinder:  
Functions Selected  
Repeatedly  
Press  
MODE  
F1 — FADE  
F1 — FOCUS  
F1 — TITLE  
F2 — 16X9  
F2 — EXPOSURE  
F2 — DISPLAY  
When the function you want to use appears, press F1 or F2 to select it.  
Each of the functions is described in detail on the following pages.  
Note: FULL AUTO appears in the side display panel when the scene select AE  
dial is set to AUTO.  
37  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Recording  
Fading In and Out  
You can add a professional touch to your recordings when you fade in and out of  
scenes. The picture will gradually appear or disappear. The speed of the fade is  
automatically controlled by the camcorder.  
F1  
F2  
16X9  
FADE  
H
S
U
P
FADE  
O
T
1
F
MODE  
2
F
F1  
x
FADE  
16X9  
0
2
1
H
N
S
A
U
M
MODE  
P
O T  
U
A
F2  
Fade Out  
Fade In  
1. Make sure scene select AE dial is not  
1. Place the POWER switch to CAMERA.  
The power indicator will light. The  
camcorder will enter record pause.  
Center the subject or scene that you  
want to record in the viewfinder.  
set to AUTO.  
2. Press MODE until FADE appears  
beside the F1 button in the display  
F1  
panel.  
FADE appears in the  
viewfinder.  
2. Make sure scene select AE dial is not  
set to AUTO.  
3. Press F1 to activate FADE. FADE  
appears in the lower right-hand corner  
of the viewfinder.  
3. Press MODE until FADE appears  
beside the F1 button in the display  
F1  
panel.  
FADE appears in the  
4. Press the thumb trigger to stop  
recording. The camcorder will  
automatically fade out of the scene  
and enter record pause.  
viewfinder.  
4. Press F1 to activate FADE. FADE  
appears in the lower right-hand corner  
of the viewfinder.  
Note: When the scene select AE dial is set to  
AUTO, FADE will not operate.  
5. Press the thumb trigger to start  
recording. The screen turns blank and  
the camcorder will automatically fade  
into the scene you have selected.  
38  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Recording  
16X9 Mode  
The camcorder has a 16X9 recording mode that lets you make recordings compatible  
with the 16X9 format. When 16X9 is activated, the camcorder records black bars at  
the top and bottom of the picture to produce the wide-screen effect. This is also  
known as “letter box” recording.  
To Record Using the 16X9 Mode  
New 16x9 TV Screen  
F1  
F2  
16X9  
FADE  
H
S
U
P
O
T
1
F
MO  
D
E
2
F
Standard Shape TV Screen  
Do not use this mode unless  
you have a compatible 16X9  
TV. When played on a  
regular TV, black bars appear  
in the picture.  
F1  
x
FADE  
16X9  
0
2
1
H
N
S
A
U
M
MODE  
P
O T  
U
A
F2  
1. Place the POWER switch to  
4. Press F2 to activate the 16X9 mode.  
Black bars appear at the top and  
bottom of the picture in the  
viewfinder.  
CAMERA. The power indicator will  
light and the camcorder will enter  
record pause.  
2. Make sure scene select AE dial is not  
5. Press the F2 button again to turn off  
set to AUTO.  
the 16X9 mode.  
3. Press MODE until 16X9 appears  
Note: When the scene select AE dial is set to  
AUTO, the 16X9 mode will not operate.  
beside the F2 button in the display  
F2  
panel.  
16X9 appears in the  
viewfinder.  
Normal Mode  
16X9 Mode  
39  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Recording  
Focusing the Camcorder  
F1  
F2  
EXP.  
FOCUS  
H
S
U
P
O
T
1
F
MODE  
2
F
F1  
x
0
2
1
FOCUS  
H
S
N
A
U
M
MODE  
P
O T  
EXPOSURE  
U
A
F2  
Auto Focus  
Focus Lock Feature  
During auto focus the camcorder will  
focus automatically on the object located  
in the center area of the viewfinder.  
The focus lock feature is useful when  
objects pass between your subject and the  
camcorder or your main subject is not  
located in the center of the viewfinder.  
• Place the scene select AE dial in AUTO  
to turn on the auto focus feature.  
FULL AUTO appears in the display  
panel.  
1. Center the main object in the  
viewfinder.  
2. Make sure the scene select AE dial is  
Note: The low-contrast indicator (  
in the viewfinder indicates the  
auto-focus system may not operate correctly  
due to low illumination, low or no contrast,  
repeated patterns, or two subjects at  
different distances overlapping.  
)
not set to AUTO.  
3. Press MODE until FOCUS appears  
beside the F1 button in the display  
panel.  
4. Press F1 to activate focus lock.  
F1  
FOCUS and the focus lock  
Caution: During recording pauses,  
light entering the camcorder will  
operate the auto-focus feature and  
consume battery power.  
indicators (  
viewfinder.  
5. Press the F1 button again to turn on  
auto focus (or place scene select AE  
dial in AUTO).  
) appear in the  
40  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Recording  
Manual Focus  
Conditions Requiring Manual Focus  
Under certain conditions, such as those  
listed, you may need to focus manually.  
• When recording a subject through a  
window.  
1. Make sure the scene select AE dial is  
not set to AUTO.  
• When recording a subject having a close  
foreground and a background that is far  
away.  
2. Slide the power zoom lever toward T  
to zoom in on your subject. To  
maintain proper focus throughout the  
zoom range, you must zoom in on the  
subject before adjusting the focus.  
• When recording two subjects at different  
distances that overlap in the same scene.  
• When the subject is not in the center of  
the viewfinder.  
3. Press MODE until FOCUS appears  
beside the F1 button in the display  
• When recording in low-light situations.  
F1  
panel.  
FOCUS appears in the  
• When recording a scene with fast  
motions, like a tennis swing.  
viewfinder.  
4. Press and hold F1 while sliding the  
power zoom lever toward T or W to  
display a clear picture in the center of  
the viewfinder.  
For slow focusing, slide the power  
zoom lever a small amount. For fast  
focusing, slide the lever all the way  
up or down.  
The  
indicators appear in the  
viewfinder. The or indicator will  
flash. When the focus cannot be  
adjusted any farther, the  
indicator  
will flash. When the focus cannot be  
adjusted any closer, the  
will flash.  
indicator  
5. Release the power zoom button to  
lock in the manual focus. The  
indicators appear in the viewfinder.  
6. To turn off manual focus, press F1 or  
place the scene select AE dial to  
AUTO. The  
indicators  
disappear from the viewfinder.  
41  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Recording  
Exposure Control (Iris)  
The camcorder automatically adjusts the iris to provide the best picture. Under  
certain conditions, you may want to brighten or darken the image manually.  
F1  
F2  
EXP.  
FOCUS  
+
H
S
U
P
O
T
1
-
F
MODE  
2
F
F1  
x
0
2
1
FOCUS  
H
S
N
A
U
M
MODE  
P
O T  
EXPOSURE  
U
A
F2  
To Manually Control Brightness  
1. Make sure the scene select AE dial is  
brighten the image or toward W to  
darken the image.  
not set to AUTO.  
2. Press MODE until EXPOSURE  
The exposure indicator bar appears in  
the viewfinder.  
appears beside the F2 button in the  
F2  
display panel.  
the viewfinder.  
EXP. appears in  
4. To return to auto iris mode, press F2  
(or place the scene select AE dial in  
AUTO).  
3. Press and hold F2 while sliding the  
power zoom lever toward T to  
42  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Recording  
Self Timer – Remote Only  
START/STOP  
SELF  
START/STOP  
Button  
ZOOM  
INT.  
TIME  
TIME LAPSE SELF  
INT./TIME Button  
TIME LAPSE  
PLAY  
STOP  
REW  
REC  
TIME  
ANIM.  
PAUSE  
FF  
INSERT  
A.DUB  
The self-timer feature delays recording to  
let the operator join the picture.  
3. Press START/STOP on the remote  
(thumb trigger on camcorder).  
Recording will be delayed the amount  
of time you selected. The tally light  
flashes with the flash speed increasing  
five seconds before recording begins.  
To Use the Self Timer  
1. Place POWER switch in CAMERA.  
2. Press TIME LAPSE SELF INT./TIME  
on the remote to select 15 seconds, 30  
seconds, 1 minute, or 5 minutes.  
REC appears in viewfinder and tally  
light lights when recording begins.  
15S,  
30S,  
1MIN, or  
5MIN appears in the viewfinder.  
To Turn Self Timer Off  
Press TIME LAPSE SELF INT./TIME to  
remove the self-timer display from the  
viewfinder.  
If the tally light is flashing, press  
START/STOP and then press TIME  
LAPSE SELF INT./TIME.  
1MIN  
43  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Recording  
Titler  
You can superimpose one of the eight preset titles stored in memory over the scene  
being recorded. You can also create your own title (up to 18 characters), store it, and  
record it alone or with one of the preset titles.  
F1  
F2  
DISP.  
TITLE  
H
S
U
P
O
T
1
F
OUR FAMILY  
MODE  
2
F
F1  
x
0
2
1
H
S
N
TITLE  
A
U
M
MODE  
P
O T  
U
A
DISPLAY  
F2  
Recording a Title Stored in Memory  
1. Place POWER switch in CAMERA.  
Power indicator will light.  
VACATION  
SUPER STAR  
FIRST  
2. Make sure the scene select AE dial is  
Title you Created  
Title Off – No Title  
Note: You can record the title you created  
along with one of the titles stored in  
memory making it possible to record a pair  
of identical titles.  
not set to AUTO.  
3. Press MODE until TITLE appears  
beside the F1 button in the display  
F1  
panel.  
TITLE appears in the  
viewfinder.  
4. Repeatedly press F1 to display the  
title you want to record. The stored  
titles appear in the following order.  
Title Off – No Title  
5. Press the thumb trigger to start  
recording. The title will be  
superimposed over the scene you are  
recording.  
HAPPY BIRTHDAY  
HAPPY HOLIDAYS  
CONGRATULATIONS  
OUR FAMILY  
6. When you are finished recording the  
title(s), press F1 to remove it from the  
viewfinder.  
SOMEONE SPECIAL  
(continued on next page)  
44  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Recording  
Creating Your Own Title  
After you create a title you can store it and record it alone or with one of the  
preset titles as described on pages 48-49. The clock cell battery must be  
installed as shown on page 46.  
DATE/TIME/CHAR  
+ AND – Buttons  
SET Button  
DATE/TIME/CHAR––SET  
T20•30•40  
TRACKING  
UNTER R/M  
+
PLAY/PAUSE  
W.BAL.  
STOP  
FF  
REW  
B
C
VCR  
POWER  
OFF  
CAMERA  
AUDIO  
RF  
DC OUT  
VIDEO  
6. Repeatedly press DATE/TIME/CHAR  
+ or – until the first character for your  
title is flashing.  
Notes: To leave a blank space, select the  
blank space in front of “A.”  
1. Place POWER switch in CAMERA.  
Power indicator will light.  
2. Make sure the scene select AE dial is  
not set to AUTO.  
3. Press MODE until DISPLAY appears  
Press and hold the button to rapidly  
advance the flashing cursor.  
beside the F2 button in the display  
F2  
panel.  
DISP. appears in the  
7. Press SET to select the character.  
viewfinder.  
8. Repeat steps 6 and 7 until you have  
selected up to 18 characters for a title.  
4. Repeatedly press F2 to display SET  
CHAR (or a title you have previously  
stored) in the viewfinder.  
5. Press SET. The CHARACTER SET  
MODE menu appears with a flashing  
cursor.  
TAYLOR WAYNE  
9. Repeatedly press SET to store the title  
and remove the CHARACTER SET  
MODE menu from the viewfinder.  
Notes: Only one title can be stored. To  
create a new title, store it over the old one.  
CHARACTER SET MODE  
A B C D E F G H I  
J K L M N O P Q R S  
T U V W X Y Z Ä Ö Ü  
` ` ` ` `  
º
A E I O U Ñ Æ ø A &  
?
: . ,  
- / ! ?  
¤
0 1 2 3 4 5 6 7 8 9  
To erase a character or title, select the  
blank space in front of the “A” for each  
character you want to erase.  
45  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Recording  
Install the Clock Lithium Cell  
The clock cell indicator  
will appear in the viewfinder when the cell has not been  
installed or needs to be replaced. The cell should last approximately one year.  
Insert object here to remove cell.  
Clock Cell  
(+ Side Facing Out)  
L
E
+
B
C
Clock Cell  
VCR  
Compartment  
POWER  
OFF  
CAMERA  
AUDIO  
RF  
DC OUT  
BATT. RELEASE  
VIDEO  
1. Make sure camcorder is turned off, and  
remove any power supply attached to  
the camcorder.  
To remove battery  
To remove battery, insert a pointed non-  
metallic object between battery and  
compartment and lift.  
2. Press release tab of clock cell compart-  
ment cover and open the compartment.  
3. Insert the clock cell with the “+”  
terminal facing out.  
4. Close the compartment cover. It will  
click into place.  
Cautions: Lithium cell battery. Replace only with 3-volt lithium cell –  
such as CR2025. Use of other cell presents a risk of fire or explosion.  
Must be disposed of properly. Never handle punctured or leaking cell.  
May cause burns or personal injury.  
Keep out of the hands of children. Can cause death or injury if swallowed.  
If swallowed, consult a physician immediately for emergency treatment.  
The lithium cell used in this device may explode resulting in a fire or  
chemical burn if mistreated. Do not recharge, disassemble, heat above  
212˚F (100˚C), or incinerate.  
Never use metallic tweezers to hold the cell, and never short circuit the +  
and – sides of the cell.  
46  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Recording  
Set the Date and Time  
After the date and time have been set, they can be displayed and recorded on your  
tapes. The clock cell must be installed.  
DATE/TIME/CHAR  
+ and Buttons  
SET Button  
DATE/TIME/CHAR––SET  
T20•30•40  
TRACKING  
UNTER R/M  
+
PLAY/PAUSE  
W.BAL.  
STOP  
FF  
REW  
B
C
DATE NOV 18.96  
AM 12:00  
VCR  
POWER  
OFF  
CAMERA  
Viewfinder Display  
AUDIO  
RF  
DC OUT  
VIDEO  
POWER Switch and Indicator  
1. Make sure the clock cell is installed.  
2. Attach a power supply.  
hour (including AM or PM), and  
minutes.  
8. Press SET to remove the flashing  
cursor and start the clock.  
3. Place the POWER switch in CAMERA.  
The power indicator will light.  
Note: The clock begins when the minute  
digits stop flashing. The clock does not  
keep time while any digits are flashing.  
4. Press the SET button. The date and  
time display appear with a flashing  
cursor on the month. The flashing  
cursor lets you know which part of the  
display you are setting.  
To Correct the Displays  
Press SET to display the time and date  
and select the item you want to change.  
Use DATE/TIME/CHAR + or – to enter  
the correct digit(s).  
5. Repeatedly press DATE/TIME/CHAR  
+ or – until the correct month appears.  
Note: Press and hold the button to rapidly  
advance the digits.  
Repeatedly press SET to remove the  
flashing cursor and start the clock.  
6. Press SET to move flashing cursor to  
the next part of the display.  
Note: Press and hold the button to rapidly  
advance the flashing cursor.  
7. Repeat steps 5 and 6 until you have  
entered the correct month, day, year,  
47  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Recording  
Select the Date, Time, or Title You Want to Record on Your Tape  
The clock cell must be installed, and the date and time set before they can be selected  
and recorded. When the scene select AE dial is in AUTO, the auto date mode is  
automatically selected.  
F1  
F2  
DISP.  
TITLE  
H
S
U
P
O
T
1
F
TAYLOR WAYNE  
MODE  
2
F
F1  
x
0
2
1
H
S
N
TITLE  
A
U
M
MODE  
P
O T  
U
A
DISPLAY  
F2  
1. Attach a power supply and place  
Date/Time Display: The date and  
POWER switch in CAMERA. The  
time will be displayed and recorded.  
power indicator will light.  
TV On-Screen Display: The  
viewfinder displays will appear on  
the screen of a TV connected to the  
camcorder during record pause. In  
this mode the date will be displayed  
and recorded.  
2. Make sure the scene select AE dial is  
not set to AUTO.  
3. Press MODE until DISPLAY appears  
beside the F2 button in the display  
F2  
panel.  
DISP. appears in the  
Note: This mode is not available during  
recording.  
viewfinder.  
4. Repeatedly press F2 to select the date,  
Date Off: No date or time will be  
displayed or recorded.  
time, or title you want to record.  
Date Display: The date will be  
displayed and recorded.  
Title Display: The title you created  
will be displayed and recorded.  
Auto Date: The date will be  
automatically recorded for  
approximately five seconds.  
Note: If no title has been created, SET  
CHAR appears and a title can be created.  
Details are on page 45.  
48  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Recording  
Date and Time Displays  
Viewfinder Displays  
Press F2 to select mode.  
NOV 18. 96  
NOV 18. 96  
NOV 18. 96  
Date Display  
TV On-Screen Display  
Return to Date Display  
AUTO DATE  
Date Off Display  
Auto Date Display  
NOV 18. 96 PM 11:59  
TAYLOR WAYNE  
Date/Time Display  
Created Title Display  
The mode selected will be recorded.  
To Record the Date, Time, or Title Display on Your Tape  
1. Place the camcorder in record pause.  
• The date has been set or changed.  
2. Place scene select AE in MAN.  
Note: Whenever the scene select AE dial  
is in AUTO, AUTO DATE is automatically  
selected.  
• This display mode has just been  
selected.  
• The tape has been changed or the  
tape compartment opened.  
3. Press MODE until DISPLAY appears  
beside the F2 button in the display  
panel.  
4. Repeatedly press F2 to display the  
date, time or title you have previously  
stored in the viewfinder.  
If you select AUTO DATE, it will  
automatically appear, be recorded for  
five seconds, and then disappear  
whenever:  
5. Press F2 to remove the display from  
the viewfinder when you are finished  
recording it.  
6. To record the display again, place  
the camcorder in record pause and  
press F2.  
49  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Recording  
Animation and Time-Lapse Recording — Remote Only  
SP•SLP/T20•30•40  
Switch set to SP  
START/ STOP  
START/STOP  
Button  
ZOOM  
DATE/TIME/CHAR––SET  
TRACKING  
T20•30•40  
SELF  
UNTER R/M  
+
L
PLAY/PAUSE  
W.BAL.  
STOP  
INT.  
TIME  
FF  
REW  
TIME LAPSE SELF  
INT./TIME Button  
B
C
TIME LAPSE  
PLAY  
STOP  
REW  
REC  
TIME  
VCR  
ANIM.  
PAUSE  
POWER  
OFF  
CAMERA  
AUDIO  
RF  
DC OUT  
FF  
.
A
TIME LAPSE  
ANIM. REC/TIME  
Button  
VIDEO  
INSERT  
A.DUB  
POWER Switch in  
CAMERA  
Animation Recording  
Animation recording produces an illusion of movement for an otherwise  
stationary scene or object by shooting a series of pictures of slightly different  
poses (such as cartooning).  
To Record Using Animation  
5. Press the thumb trigger (START/STOP  
on remote). Recording stops  
1. Use the SP•SLP/T20•30•40 switch to  
set the tape speed to SP.  
automatically after the selected  
amount of recording time.  
2. Place camcorder in record pause.  
(POWER switch must be in CAMERA.)  
You may want to take two to five  
shots of the subject in the same  
position.  
3. Press TIME LAPSE ANIM. REC/TIME  
on remote to select the amount of  
recording time (1/4, 1/2 or 1 second).  
6. When you are finished, press TIME  
The recording time selected will  
appear in the viewfinder.  
LAPSE ANIM. REC/TIME on remote  
until  
disappears from the view-  
finder or place the POWER switch in  
VCR.  
30MIN T30 SP  
Notes: If you start animation recording at the  
very beginning of a tape, record for about five  
seconds so the tape runs smoothly. Using the  
fade feature is a good way to begin.  
1/4S  
The fade feature will not operate during  
animation recording.  
4. Focus the camcorder on the subject  
you want to record.  
Use a tripod to keep the camcorder steady.  
50  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Recording  
Time-Lapse Recording  
Time-lapse recording makes automatic recordings at preset time intervals. The  
recording will show subtle changes (such as shifts in cloud formations or plant growth)  
when it remains focused on an object.  
To Record Using Time Lapse  
5. Focus the camcorder on the subject  
you want to record.  
1. Use the SP•SLP/T20•30•40 switch to  
set the tape speed to SP.  
6. Press the thumb trigger (START/STOP  
on the remote). The camcorder will  
start and stop recording the selected  
amount of time.  
2. Place the POWER switch in CAMERA  
to put the camcorder in record pause.  
3. Press TIME LAPSE ANIM. REC/TIME  
on remote to select the amount of  
recording time (1/4, 1/2 or 1 second).  
The tally light flashes with the flash  
speed increasing five seconds before  
recording begins.  
The recording time selected appears in  
the viewfinder.  
7. When you are finished, press each  
TIME LAPSE button during record  
30MIN T30 SP  
pause until  
from the viewfinder.  
and  
disappear  
PAUSE  
If the camcorder is recording, first  
press the thumb trigger (START/STOP  
on the remote) to stop recording.  
1/4S  
4. Press TIME LAPSE SELF INT./TIME  
on remote to select the interval time  
(15 seconds, 30 seconds, 1 minute or  
5 minutes).  
The interval time selected appears in  
the viewfinder.  
30MIN T30 SP  
PAUSE  
1/4S  
15S  
51  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Recording  
Audio Dubbing (Remote Only)  
Audio dubbing lets you record new sound (audio) in place of previously  
recorded audio.  
PLAY/PAUSE  
Button  
COUNTER R/M Button  
START/STOP  
ZOOM  
SELF  
INT.  
TIME  
DATE/TIME/CHAR––SET  
TRACKING  
PLAY  
Button  
T20•30•40  
TIME LAPSE  
UNTER R/M  
PLAY  
STOP  
REW  
+
PLAY/PAUSE  
W.BAL.  
STOP  
FF  
REW  
REC  
TIME  
B
C
ANIM.  
PAUSE  
PAUSE  
VCR  
REW  
POWER  
OFF  
FF  
CAMERA  
Button  
Button  
AUDIO  
INSERT  
A.DUB  
RF  
DC OUT  
T
VIDEO  
A. (Audio)  
DUB Button  
REW Button  
POWER Switch in VCR  
To Audio Dub  
camcorder in audio dub standby.  
1. Place the tape with safety tab intact  
into the camcorder.  
and appear in the viewfinder.  
2. Place POWER switch in VCR.  
3. Locate the place you want the audio  
dubbing to stop and press  
PLAY/PAUSE (PAUSE on remote).  
4. Press COUNTER R/M for more than  
two seconds on the camcorder to set  
the time counter back to 0:00:00.  
Display in Viewfinder  
5. Press COUNTER R/M again for less  
than one second to turn on memory  
stop (M).  
8. Press PLAY on the remote to start  
audio dubbing.  
appears in the viewfinder. The new  
audio will be recorded in place of the  
old audio.  
6. Press REW, locate the place you want  
audio dubbing to begin, and press  
PLAY/PAUSE (PAUSE on remote)  
exactly at the beginning of the scene.  
When the counter reading of  
M 0:00:00 is reached, audio dubbing  
stops and the camcorder enters  
playback.  
7. Press A.DUB and PAUSE on the  
remote together to place the  
52  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Recording  
Edit Insert (Remote Only)  
Edit insert lets you record new video in place of previously recorded video without  
replacing the audio.  
START/STOP  
PLAY/PAUSE  
COUNTER R/M Button  
Button  
ZOOM  
SELF  
INT.  
TIME  
PLAY  
TIME LAPSE  
PLAY  
Button  
REC  
TIME  
ANIM.  
PAUSE  
STOP  
REW  
PAUSE  
Button  
DATE/TIME/CHAR––SET  
TRACKING  
T20•30•40  
UNTER R/M  
+
PLAY/PAUSE  
W.BAL.  
STOP  
FF  
REW  
REW  
FF  
B
C
Button  
INSERT  
A.DUB  
VCR  
POWER  
OFF  
CAMERA  
INSERT  
Button  
AUDIO  
RF  
DC OUT  
T
VIDEO  
REW Button  
POWER Switch in VCR  
To Edit Insert  
and appear in the viewfinder.  
1. Place the tape with safety tab intact  
into the camcorder.  
2. Place POWER switch in VCR.  
3. Locate the place you want the edit  
insert to stop and press PLAY/PAUSE  
(PAUSE on remote).  
4. Press COUNTER R/M for more than  
two seconds on the camcorder to set  
the time counter back to 0:00:00.  
Display in Viewfinder  
Note: To dub new audio at the same time,  
press A.DUB and PAUSE together. Press  
INSERT and PAUSE together to return to  
the edit-insert mode.  
5. Press COUNTER R/M again for less  
than one second to turn on memory  
stop (M).  
6. Press REW, locate the place you want  
edit insert to begin, and press  
8. Press START/STOP on remote (thumb  
trigger on camcorder) to start edit  
PLAY/PAUSE (PAUSE on remote)  
exactly at the beginning of the scene.  
insert.  
appears in the viewfinder.  
New video is recorded over the  
previous video. When the counter  
reading of M 0:00:00 is reached, edit  
insert stops and the camcorder enters  
playback.  
7. Press INSERT and PAUSE on the  
remote together to place the  
camcorder in edit insert standby.  
Note: The camcorder may stop slightly  
before or after the edit out point and there  
may be slight distortion at this point.  
53  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Recording  
Built-In Color Enhancement Light  
The built-in color enhancement light will automatically add more light when needed.  
The POWER switch must be in CAMERA to operate the video light.  
Built-In Video Light  
H
S
U
P
T
1
F
MODE  
LIGHT OFF•AUTO•ON  
Button  
2
F
To Use the Light  
Set the LIGHT OFF•AUTO•ON switch.  
• Set to ON to turn the light on.  
Note: We recommend you set white  
Cautions:  
balance to the indoor mode (  
using the light.  
) when  
Do not operate the video light closer  
than one foot to people or other  
objects.  
• Set to AUTO to have the light come on  
automatically when the camcorder  
senses there is insufficient light for the  
best recording.  
The video light becomes very hot. Do  
not touch it during operating or right  
after using it. Serious injury may  
result.  
Notes: If the lighting condition is unstable  
the light may turn on and off. Set the light  
to ON or OFF.  
Do not place the camcorder in a  
carrying case right after using the light.  
The light may stay on during high speed  
shutter recording.  
• Set to OFF to turn the light off. Turn  
Never operate the video light close to  
flammable or explosive material.  
the light off when you are not  
recording to save battery power.  
Note: When the light is turned on, the  
camcorder may turn off if the battery’s power  
is low even though the battery level indicator  
is not flashing.  
54  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Recording  
Replacing the Bulb  
We recommend you consult your dealer or Servicenter to replace the bulb.  
55  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Recording  
Attaching the Shoulder Strap  
The camcorder’s shoulder strap is designed to let you carry the camcorder from your  
shoulder and – when you are ready to shoot – bring the camcorder to shooting position  
in one quick movement.  
To Attach the Shoulder Strap  
4. Attach the other end of the strap to the  
other shoulder strap attachment ring.  
1. If the strap keeper is  
over a double section  
of the strap, slide the  
strap keeper off the  
end of the strap.  
Replace the keeper  
on the strap between  
the buckle and the  
end of the strap as  
shown.  
+
B
C
Keeper  
VCR  
POWER  
OFF  
CAMERA  
AUDIO  
RF  
DC OUT  
BATT. RELEASE  
VIDEO  
2. Loop the end of the strap over the top  
of the shoulder strap attachment ring.  
5. Adjust the shoulder strap to the desired  
length.  
Keeper  
Buckle  
6. Slide both keepers up snugly against  
the shoulder strap attachment rings to  
prevent the strap from slipping.  
+
B
C
VCR  
POWER  
OFF  
CAMERA  
Attachment  
Rings  
Cautions: When carrying the  
camcorder with the shoulder strap,  
you may find it convenient to rotate  
the viewfinder down and slide it to  
the front. This helps prevent  
possible damage to the viewfinder  
from bumping against your body as  
you move.  
AUDIO  
RF  
DC OUT  
BATT. RELEASE  
VIDEO  
3. Thread the end of the strap back  
through the keeper and buckle making  
sure it is threaded under the outer  
strap. Make sure the strap is not  
twisted.  
Make sure the shoulder strap is  
firmly attached before using it to  
carry the camcorder.  
56  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Playback  
Viewfinder Playback and Playback Features  
START/STOP  
SELF  
TRACKING Buttons  
PLAY  
Button  
ZOOM  
INT.  
TIME  
EJECT  
Button  
PLAY/PAUSE  
Button  
TIME LAPSE  
PLAY  
STOP  
REW  
REC  
TIME  
ANIM.  
PAUSE  
PAUSE  
Button  
DATE/TIME/CHAR––SET  
TRACKING  
T20•30•40  
STOP  
Button  
UNTER R/M  
+
L
FF  
PLAY/PAUSE  
W.BAL.  
STOP  
FF  
REW  
STOP Button  
FF Button  
B
INSERT  
A.DUB  
C
FF  
REW  
Button  
Button  
REW Button  
VCR  
POWER  
OFF  
CAMERA  
AUDIO  
POWER Switch in VCR  
RF  
DC OUT  
VIDEO  
POWER Indicator  
Stop-Action Pause  
Viewfinder Playback  
• During playback, press PLAY/PAUSE  
on the camcorder (or PAUSE on the  
remote) to “stop the action” and view  
one frame of the tape.  
Viewfinder playback is the simplest way  
to watch tapes using the camcorder.  
To Play Back a Tape  
1. Place POWER switch in VCR. The  
Caution: Pause is designed for momentary  
interruptions and should not be used for an  
extended period of time. If the camcorder remains  
in pause for more than five minutes, it will  
automatically enter the stop mode and then turn  
off to prevent excessive tape wear.  
power indicator will light.  
2. Slide EJECT and insert the cassette  
you want to play back. Close the  
cassette compartment.  
3. Press PLAY/PAUSE to begin playback.  
If necessary, adjust tracking.  
• Press PLAY/PAUSE on the camcorder  
(or PLAY on the remote) to return to  
normal playback.  
During playback, use the playback  
features.  
4. Press STOP when you are finished.  
Tracking  
During playback, streaks may appear in  
the playback picture. Press either  
TRACKING button to move the streaks  
up or down and out of the picture.  
Visual Searching  
• During playback, press and release FF  
or REW if you want to search the tape  
visually in forward or reverse.  
• During stop-action playback, pressing  
one TRACKING button may reduce  
picture “jitter” (picture bouncing up  
and down). Some “jitter” is normal.  
• Press PLAY/PAUSE on the camcorder  
(or PLAY on the remote) to return to  
normal playback.  
For brief searching, press and hold FF  
or REW for more than two seconds.  
Simultaneously press both TRACKING  
buttons to return tracking to its preset center.  
Note: The TRACKING buttons may have no  
effect on tapes recorded on other camcorders  
or VCRs.  
• Release the button to return to normal  
playback.  
57  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Playback  
Using the Cassette Adapter  
The camcorder uses a smaller size cassette, but records in standard VHS format. The  
cassette adapter allows you to play your VHS-C cassettes in a VCR just like other  
standard VHS cassettes.  
Insert the VHS-C cassette into the cassette adapter. Insert the cassette adapter into the  
VHS VCR like a normal VHS cassette.  
Install Cassette Adapter’s Battery  
Battery  
Compartment  
Cover  
1. Remove battery compartment cover.  
Notes: Replace the battery when the load  
time becomes much longer than normal.  
2. Install supplied “AA” battery so  
positive (+) and negative (–) ends  
align properly with (+) and (–)  
terminals in battery compartment.  
Remove the battery from the cassette adapter  
if it will not be used for a month or more.  
This will prevent possible damage from  
battery leakage. If leakage occurs, wipe up  
the liquid inside the compartment and replace  
the battery with a new one.  
3. Replace battery compartment cover.  
Insert Cassette into Cassette Adapter  
Cassette  
Compartment  
Lid  
Tape Wheel  
EJECT Switch  
1. Before inserting the cassette into the  
adapter, remove any slack in the tape  
by turning the tape wheel on the side  
of the cassette.  
3. Insert the cassette with the tape  
window on the left and facing up.  
Allow the cassette to drop into the  
adapter. Do not force the cassette.  
2. Slide EJECT to the right to open the  
cassette compartment lid.  
(continued on next page)  
58  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Playback  
Load Detector  
4. Gently close the cassette compartment  
lid until it locks into place. Make sure  
the cassette reel area under the adapter  
is free to turn while the cassette is  
loading.  
Caution: If the load detector is still  
extending from the side of the cassette  
adapter after you have attempted to load  
the cassette, loading is not complete.  
Try to load the cassette again.  
Note: You should hear a whirring sound  
while the tape loads. The adapter’s load  
detector will automatically retract into the  
adapter.  
Attempting to insert the cassette adapter  
into a VCR with the load detector  
extending may cause damage to the  
adapter and/or VCR.  
Remove Cassette from Cassette Adapter  
Access Hole  
1. Slide the adapter’s EJECT switch to  
the right. The load detector will  
extend from the side and the whirring  
sound indicates the tape is being  
released before the adapter’s cassette  
compartment lid opens.  
2. Use the access hole on the bottom of  
the adapter to push the cassette up and  
remove it from the adapter.  
3. Gently close the adapter’s cassette  
compartment lid.  
59  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Playback  
Playback on TV (or VCR) with AUDIO/VIDEO IN Jacks  
To connect your camcorder to a TV monitor (or VCR) with AUDIO/VIDEO IN jacks,  
you will need an optional audio/video cable such as VH83 shown on page 64.  
If your TV is already connected to a VCR, you can attach the camcorder to the VCR  
and watch what the camcorder is recording or playing on the TV.  
Back of  
Mono VCR or  
TV Monitor  
1 White  
Audio Plug  
Audio/Video  
Output Cable  
(Optional)  
AUDIO  
IN  
B
C
AUDIO Jack  
VIDEO  
IN  
3
VCR  
POWER  
OFF  
CAMERA  
2
Yellow Video Plug  
4
AUDIO  
OR  
RF  
DC OUT  
VIDEO  
Back of  
Stereo VCR or  
TV Monitor  
1 White  
Audio  
Plug  
Y-Adapter  
(Optional)  
Audio/Video  
Output Cable  
(Optional)  
L
AUDIO  
IN  
3
VIDEO Jack  
R
VIDEO  
IN  
4
2
Yellow Video Plug  
Installation  
2 Attach the yellow plug to the VIDEO  
1 Attach the white plug on one end of  
the audio/video cable to the AUDIO  
IN jack on the TV (or VCR).  
IN jack on the TV (or VCR).  
3 Attach the white plug on the other end  
of the audio/video cable to the AUDIO  
jack (located under the small cover)  
on the back of the camcorder.  
Notes: If your cable does not have white  
and yellow plugs, just be sure to attach the  
same color to the audio jacks.  
If your TV (or VCR) has stereo AUDIO IN  
jacks, attach the plug to the one labeled  
MONO. If one is not labeled MONO, you  
may need a Y-adapter, such as AH25,  
shown on page 66 to hear both channels.  
4 Attach the yellow plug to the yellow  
VIDEO jack on the camcorder.  
(continued on next page)  
60  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Playback  
Playback Operation and How to Copy Tapes on the VCR  
1. A. Camcorder connected directly to  
TV: Turn on the TV and tune it to  
the video input channel.  
• During playback, use the playback  
features on page 57.  
4. To copy what the camcorder is playing,  
place a blank cassette in the VCR, and  
press the VCR’s RECORD button.  
B. Camcorder connected to VCR that  
is already connected to TV: Turn  
on VCR and place it in the “line” or  
“camera mode”. (If your VCR does  
not have a “line” or “camera  
Note: Make sure the memory-stop feature  
is turned off (press COUNTER R/M) or the  
camcorder will enter play pause when the  
counter reaches M 0:00:00.  
mode”, consult the VCR owner’s  
manual.) Operate the TV as you  
normally do to see the signal  
5. Press STOP when you are finished.  
coming from the VCR.  
Caution: The unauthorized recording  
of copyrighted material may infringe  
the rights of others.  
2. Place the POWER switch in VCR to  
turn on the camcorder. The power  
indicator will light.  
3. Press PLAY/PAUSE.  
If noise bars appear on the screen,  
press TRACKING – or +.  
Viewing What the Camcorder is Seeing (or Recording)  
1. A. Camcorder connected directly to  
TV: Turn on the TV, and tune it to  
the video input channel.  
2. Place the POWER switch  
in CAMERA.  
Note: When the camcorder is used as a  
camera, turn the TV’s volume down to  
prevent a high-pitched squeal caused by  
feedback.  
B. Camcorder connected to VCR that  
is already connected to TV: Turn  
on VCR and place it in the “line” or  
“camera mode”. (If your VCR does  
not have a “line” or “camera  
3. Press the thumb trigger to begin  
recording. You can watch what the  
camcorder is seeing (or recording) on  
the TV screen.  
mode”, consult the VCR owner’s  
manual.) Operate the TV as you  
normally do to see the signal  
coming from the VCR.  
Notes: The remote control will operate the camcorder.  
During record pause, you can use the display feature to see the camcorder’s displays on the TV  
screen. Details are on pages 48-49.  
61  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Playback  
Playback on a TV Without Audio/Video Inputs  
To connect your camcorder to a TV without audio/video inputs, you will need an  
optional 1CVA147C RF output adapter and an optional coaxial RF cable, such as VH82  
or VH84 shown on page 66. If your TV has AUDIO and VIDEO IN jacks (or is  
connected to a VCR), refer to pages 60-61.  
VHF Antenna  
DAT  
Optional Coaxial  
RF Cable  
(such as VH82 or VH84)  
T20•30•40  
UNTER R/M  
W.BAL.  
1
REW  
B
C
OR  
Back of TV  
VCR  
VHF  
2
POWER  
OFF  
CAMERA  
OR  
AUDIO  
Optional  
Transformer  
(Such as VH54)  
RF  
DC OUT  
VHF  
VIDEO  
AUDIO, RF DC  
OUT, VIDEO Jacks  
3
2
OR  
OUT TO TV Connector  
RF Output  
Adapter's Plug  
Optional  
300-75 Ohm  
VCR/TV Switch  
Transformer  
IN FROM ANT  
Connector  
Optional RF Output Adapter  
(1CVA147C)  
CH3/CH4 Switch  
Installation  
1 Disconnect the VHF antenna from  
your TV. Connect the antenna to the  
IN FROM ANT connector on the RF  
output adapter if you are going to leave  
the adapter connected to the TV.  
2 Attach one end of the optional  
coaxial RF cable to the OUT TO TV  
connector on the adapter, and attach  
the other end to the VHF input on  
your TV as shown.  
Note: If your VHF antenna is the flat  
twin-lead type attached by two screws,  
you will also need an optional 300-to-75  
ohm transformer.  
Note: If your TV has 300 ohm screw  
terminals, you will need a 75-to-300 ohm  
transformer, such as VH54, shown on  
page 66.  
3 Attach the RF output adapter’s plug  
to the AUDIO, RF DC OUT, and  
VIDEO jacks located under the small  
cover on the back of the camcorder.  
62  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Playback  
Playback Operation  
5. Press PLAY/PAUSE on the camcorder.  
1. Set the CH3/CH4 switch on the RF  
output adapter to channel 3 or 4.  
• During playback, use the playback  
features described on page 57.  
2. Turn on the TV, and tune it to the  
same channel you selected with the  
RF output adapter’s CH3/CH4 switch.  
If noise bars appear on the screen,  
adjust tracking as described on  
page 57.  
3. Place adapter’s VCR/TV switch in  
VCR.  
6. Press STOP on the camcorder when  
you are finished.  
4. Place POWER in VCR. Power  
indicator will light.  
Viewing What the Camcorder Is Recording  
1. Turn on the TV and tune it to channel  
3 or 4. When the camcorder is used as  
a camera, turn the TV’s volume down  
to prevent a high-pitched squeal  
caused by feedback.  
5. Press the thumb trigger to begin  
recording. You can watch what the  
camcorder is seeing (or recording) on  
the TV screen.  
2. Set the CH3/CH4 switch on the RF  
Notes: The remote will also operate the  
camcorder.  
output adapter to the same channel  
you selected on the TV.  
During record pause, you can use the display  
feature to see the camcorder’s displays on the  
TV screen. Details are on pages 48-49.  
3. Place adapter’s VCR/TV switch in  
VCR.  
4. Place POWER in CAMERA. Power  
indicator will light.  
Normal TV Viewing  
For normal TV viewing, you may leave  
the RF output adapter hooked up to the  
TV. Disconnect the adapter’s plug from  
the camcorder and place the adapter’s  
VCR/TV switch in TV.  
Note to Cable TV Installer  
This reminder is provided to call your attention to Article 820-40 of the  
National Electrical Code (Section 54 of Canadian Electrical Code, Part I),  
that provides guidelines for proper grounding and, in particular, specifies  
that the cable ground shall be connected to the grounding system of the  
building as close to the point of cable entry as practical.  
63  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Optional Accessories  
We invite you to take a look at some great ideas for sparking creativity  
and adding to the fun of using your compact VHS camcorder. The  
following pages have a selection of accessories to help make your  
memorable moments look and sound even better.  
These accessories are designed to make the process of recording and  
watching your videos more enjoyable.  
To order accessories, contact your local Dealer.  
If a dealer is not nearby, all accessories are available through toll-free  
ordering or by using the order form on page 67.  
AC201A Soft Carrying Case  
DCC08 Car Cord Adapter  
Do not use  
any other car  
cord with this  
camcorder.  
This car cord adapter enables you to  
Custom compact soft case designed  
especially to provide protection and utility  
for your compact VHS camcorder and  
most accessories. Rugged fabric lined  
with soft non-abrasive material and  
generous padding. Has three outside  
pockets with storage for lens filters,  
adapters, batteries, and tapes.  
operate your camcorder from your car,  
truck, or RV by plugging the car cord  
directly into the vehicle’s cigarette lighter  
socket. The DCC08 is designed  
specifically to convert power from a 12-  
volt battery to a 6-volt output.  
64  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Optional Accessories  
FB1260 and FB120 Rechargeable  
Batteries  
Using the Optional AC088 Tripod  
Mounting the camcorder on a tripod,  
such as AC088, will keep the camcorder  
steady and produce excellent video  
results.  
This tripod’s fluid-effect head provides  
smooth camera pan and tilt. The quick-  
release mount makes it easy to attach or  
remove the camcorder. The grooved,  
tubular 3-section leg design folds down to  
26" when not in use. Rubber feet allow  
for sure footing.  
These rechargeable nickel-cadmium  
batteries are designed specifically for long  
life. The FB1260 is the same battery that  
came packed with your camcorder. The  
FB120 powers your camcorder twice as  
long as the FB1260 (with video light off –  
depending on how much you use zoom  
and pause). Both can be recharged with  
the AC adapter/charger that came with  
your camcorder.  
H
S
U
P
T
1
F
MO  
D
E
2
F
CPS91 AC Battery Charger  
The CPS91 battery charger plugs directly  
into an AC outlet and charges the FB1260  
and FB120 camcorder batteries. Because  
the CPS91 operates on 100-240 Volts,  
50/60 Hz, it can be used virtually  
anywhere in the world. A plug adapter  
may be required in some countries.  
Charging takes approximately seven hours  
for the FB1260 (1-hour battery) and 13  
hours for the FB120 (2-hour battery).  
Cautions: Before using a tripod, make sure it is  
stable enough to hold the camcorder without  
falling over. Do not transport the camcorder  
attached to the tripod.  
When attaching your camcorder to a tripod, be  
careful not to force the tripod screw into the  
camcorder’s tripod mounting hole.  
All specifications and  
descriptions of accessories are  
subject to change without notice.  
The tripod screw should not protrude into the  
camcorder more than approximately three-eighth  
(3/8) inch. Forcing the screw could damage the  
mounting hole on the bottom of the camcorder.  
65  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Optional Accessories  
1CVA147C RF Output Adapter  
VH54 Cable Transformer  
This 75-to-300 ohm transformer is used to  
connect a standard 75-ohm antenna cable  
(such as VH82 or VH90) to the 300 ohm  
screw terminals on a TV.  
This RF output adapter is used with a  
coaxial RF cable, such as VH82 or VH90,  
to connect your camcorder to a standard  
TV (one without audio/video inputs) for  
playback. If your antenna cable is the flat  
twin-lead type attached by two screws,  
you will also need a 300-to-75 ohm  
transformer. If your TV has 300 ohm  
antenna screw terminals, you will need an  
optional 75-to-300 ohm transformer such  
as VH54.  
VH83 Audio/Video Cable  
This six foot audio/video dubbing cable  
can be used for copying tapes from the  
camcorder to another VCR or camcorder.  
Coaxial RF Cables  
VH82 (6-ft)  
VH90 (12-ft)  
AH25 Y-Adapter  
These RF cables are used with the RF  
output adapter to connect your camcorder  
to a standard TV (one without  
audio/video input jacks) for playback.  
If your TV has 300 ohm antenna screw  
terminals, you will need an optional  
75-to-300 ohm transformer such as  
VH54. If your antenna cable is the flat  
twin-lead type attached by two screws,  
you will also need an optional 300-to-75  
ohm transformer.  
This Y-adapter allows you to connect  
your camcorder’s mono audio cable to a  
stereo TV or VCR.  
All specifications and descriptions of accessories  
are subject to change without notice.  
66  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Accessory Order Form  
Order Form for Camcorder Model CC634  
Description  
Part No.  
AC088  
AC201A  
ACS091  
AH25  
Price  
Qty. Total  
Super Lightweight Tripod  
Soft Camcorder Case  
Shoulder Strap  
$ 39.95  
$ 39.95  
$ 12.95  
Y-Adapter  
$
2.95  
AC Battery Charger  
Car Cord Adapter  
Rechargeable Battery (Extended)  
Rechargeable Battery (Standard)  
75-300 Cable Transformer  
Coaxial RF Cable  
CPS91  
DCC08  
FB120  
FB1260  
VH54  
VH82  
VH83  
VH90  
$ 59.95  
$ 89.95  
$ 89.95  
$ 49.95  
$
$
$
$
2.95  
6.95  
5.95  
7.95  
Audio/Video Cable  
Coaxial RF Cable  
RF Output Adapter  
Remote Control  
AC Adapter/Charger  
and  
1CVA147C $ 59.95  
221125  
221400  
$ 39.95  
$ 96.45  
Power Connector  
220389  
$ 27.75  
Cassette Adapter  
Bulb Assembly  
232845  
233430  
$ 49.95  
$ 44.95  
Prices are subject to change without notice.  
Total Merchandise...........................................................$__________  
Sales Tax.........................................................................$__________  
We are required by law to collect the appropriate  
sales tax for each individual state, county, and  
locality to which the merchandise is being sent.  
Shipping and Handling....................................................$  
5.00  
Total Amount Enclosed ................................................$__________  
Use VISA, MasterCard, or Discover.  
Money order or check must be in U.S.  
currency only. No COD or cash.  
Please complete other side also  
67  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Accessory Order Form  
Charge your order on your VISA,  
MasterCard, or Discover Card by  
filling in below  
USE YOUR CREDIT CARD  
®
IMPORTANT: Copy complete account number  
from your VISA card  
My card expires:  
s
r
r
TM  
IMPORTANT: Copy complete account number  
from your MasterCard  
Copy Number  
above your  
name on  
My card  
expires:  
MasterCard  
IMPORTANT: Copy complete account number  
from your Discover Card  
My card expires:  
AUTHORIZED SIGNATURE  
Prices are subject to change without notice.  
Print or type your name and  
address clearly. This will be  
your mailing label.  
A complete and correct  
order will save you days  
of waiting.  
Name:  
Street:  
Apt:  
City:  
State:  
Zip:  
Please make sure that both sides of this form  
have been filled out completely.  
• Allow 4 weeks for delivery.  
• All accessories are subject to availability.  
68  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Accessory Order Form  
To order accessories, contact your local Dealer.  
If a dealer is not nearby, you can also follow the directions below to order by  
telephone or direct-by-mail.  
United States and Canada Orders  
To place your order by phone, have your Visa, MasterCard, or Discover card  
ready and call the toll-free number listed below between 8AM and 8PM (EST)  
Monday through Friday or between 9AM and 5PM (EST) Saturday.  
Use this number only to place an order for accessory items listed on  
this order form.  
1 – 800 – 338 – 0376  
To place your order by mail, detach and mail the completed order form with  
credit card information, money order, or check in U.S. currency (made payable  
to Thomson Consumer Electronics, Inc.) to the following address:  
Video Accessories  
PO Box 8419  
Ronks, PA 17573  
69  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Trouble Checks  
Troubles sometimes are caused by simple “faults” that you can easily correct without  
the help of a service technician by first checking a few basic remedies.  
Before you call or take your camcorder to an Authorized RCA Camcorder Servicenter,  
look below for the type of trouble you are experiencing. Then perform the simple  
checks and adjustments listed for that trouble.  
If service should be necessary, the warranty information lists what your warranty  
covers and explains how to get service.  
Trouble  
Checks and Adjustments  
No power  
• Place the POWER switch in CAMERA or VCR to turn on  
the camcorder. The power indicator will light.  
• If using battery, it may need to be recharged.  
• If using AC adapter/charger, make sure it is plugged into a  
working outlet.  
Won’t record or  
playback  
• If using AC adapter/charger, make sure it is plugged into a  
working outlet.  
• If the dew indicator ( ) flashes in the viewfinder, there is  
moisture in the camcorder. Wait until the dew indicator no  
longer appears before operating the camcorder.  
• Make sure POWER switch is in correct position for desired  
operation.  
• There may not be a cassette in the camcorder.  
• Try ejecting and reinserting the cassette.  
• The cassette tape may be broken, try another cassette.  
• You may have reached the end of the cassette, try  
rewinding it.  
Won’t playback  
Won’t record  
POWER switch must be in VCR position.  
• Safety tab has been removed. (See page 20.)  
POWER switch must be in CAMERA.  
No picture  
• Open lens cover.  
Camcorder turns  
itself off  
• Place POWER switch to OFF and then CAMERA or VCR  
to turn back on. If camcorder is left in record pause or play  
pause for several minutes, it will turn itself off to prevent  
tape wear.  
70  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Trouble Checks  
Trouble  
Checks and Adjustments  
• Aim remote at camcorder’s remote control sensor.  
• Remote’s lithium cell battery may be installed incorrectly.  
See page 18.  
Camcorder does not  
respond to remote  
control  
• Remote control’s lithium cell battery may need replacing.  
• Remote control sensor on camcorder exposed to direct  
sunlight or strong artificial light.  
• Time-counter memory may be on. Whenever an “M”  
appears with the time-counter display, the camcorder will  
stop rewinding (or fast forwarding) when counter reads  
M 0:00:00. Press REW or FF again to continue  
rewinding or fast forwarding, or press COUNTER R/M to  
turn off the memory-stop feature.  
Tape stops during  
rewind or fast  
forward  
• Press PLAY/PAUSE to return to normal playback.  
Camcorder remains  
in pause mode  
• Subject was too far from camcorder.  
Sound is too low or  
distorted  
• If the dew indicator ( ) flashes in the viewfinder, there  
is moisture in the camcorder. Wait until this indicator no  
longer appears before operating the camcorder.  
Dew Indicator  
flashing in  
viewfinder  
• Subject is dark or behind glass. Auto-focus may not  
work under these conditions. Place scene select AE dial  
in MAN and focus manually. See pages 40-41.  
Subject is not in center of viewfinder or two subjects are  
at different distances. Place scene select AE dial in MAN  
and focus manually. See pages 40-41.  
Poor auto-focus  
operation  
• Auto focus is automatically turned off when some effects  
are selected with the scene select AE dial. Place scene  
select AE dial in AUTO. See page 41.  
(continued on next page)  
71  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Trouble Checks  
Trouble  
Checks and Adjustments  
Viewfinder displays  
are out of focus  
• Lens is smudged, and image appears unfocused.  
• Eyepiece focus control is misadjusted.  
• The small controls on the bottom of the viewfinder control  
the brightness (B) and color (C) of the viewfinder. If the  
brightness or color of the viewfinder ever does require  
adjustment, carefully use a plastic screwdriver. Make the  
adjustments with caution to prevent damaging the miniature  
controls.  
Picture is too dark  
or subject too dark  
• For best results, only use higher shutter speeds outdoors.  
Rotate scene select AE dial to sports ( ) or  
Shutter( ). See page 35.  
• Subject in front of a strong backlight. Rotate scene select  
AE dial to select back-lit ( ). See page 35.  
• Turn on the built-in color enhancement light.  
• Add more light using the exposure control. See page 42.  
Picture recorded  
with special effect  
Scene select AE dial may be turned to special effect mode.  
Turn the scene select AE dial to AUTO.  
See page 35.  
Picture recorded in  
brown tone  
SEPIA ( ) selected with scene select AE dial. Turn the  
scene select AE dial to AUTO. See page 35.  
Picture recorded  
with black bars at  
top and bottom  
• Camcorder is set to the 16X9 mode. Turn off 16X9.  
See page 39.  
Colors do not look  
natural on recording  
• Try adjusting white balance. See page 36.  
Title recorded on  
tape  
• Title is recorded whenever it appears in viewfinder.  
Remove the title from viewfinder. See pages 48-49.  
Power zoom lever  
does not operate  
zoom  
Check MODE selected. Zoom lever operates other features  
when some modes are selected. See page 37.  
72  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Trouble Checks  
Trouble  
Checks and Adjustments  
Date and/or time  
were recorded on  
tape  
• Displays will be recorded on tape whenever they appear in  
the viewfinder. Remove them from viewfinder when  
recording. See pages 48-49.  
When AUTO DATE is selected (scene select AE dial in  
AUTO), display will automatically be recorded when you  
begin recording or change the cassette. See pages 48-49.  
Date and/or time are  
incorrect  
• Clock lithium cell battery may need replacing. See page 46.  
• Date or time may need to be set. See pages 47.  
Vertical white lines  
appear when shoot-  
ing bright object  
• This may occur when background extremely contrasts with  
the subject.  
Error number  
(E01, E02, etc.)  
appears in  
• Try disconnecting power source. Wait ten seconds and then  
connect power source again. If error number does not  
disappear from viewfinder, consult your Authorized RCA  
Camcorder Servicenter.  
viewfinder  
Battery runs down  
sooner than  
expected  
• If camcorder has not been used for some time, charge the  
battery using the REFRESH feature on the adapter/charger.  
• Battery run times are measured when the camcorder is  
recording continuously. You can check your battery by first  
fully charging it and then aiming the camcorder at a clock  
and recording the picture of the clock. When the recording  
stops, play the last recorded section, and note the clock time.  
A one-hour battery should give you about 60 minutes of  
recording time. In practical use, you may not be able to  
record for the full time because the camera uses battery  
current when it is waiting between recordings (record-pause  
mode) and while you focus and zoom.  
73  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Care and Maintenance  
Cleaning the Camcorder  
To clean the camcorder’s exterior,  
remove any power source connected to  
the camcorder and gently wipe it with a  
clean soft cloth.  
Caution: Use of strong cleaning  
products, such as those containing  
alcohol or benzine, may damage  
the camcorder.  
Cleaning the Camcorder’s Lens  
To clean the camcorder’s lens, blow it with a blower brush, and then  
gently wipe the lens with cleaning tissue and commercially prepared  
cleaning solution designed for use on camera lens. Improper cleaning  
may scratch the lens.  
Caution: Do not  
H
S
U
P
A
U
1
F
touch the lens with  
your fingers. The  
oil from your skin  
can damage the  
lens.  
MODE  
2
F
Lens  
Cleaning the Camcorder’s Viewfinder  
The viewfinder eyepiece can be removed for cleaning.  
1. Turn the eyepiece  
counterclockwise and pull it out.  
2. Remove dust using a blower brush.  
3. Reattach the eyepiece by aligning  
the reference marks, and then turn  
the eyepiece clockwise until it  
clicks.  
Reference  
Marks  
74  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Care and Maintenance  
Proper Care and Storage  
• The camcorder can be damaged by  
improper storage or handling. Do not  
subject the camcorder to swinging,  
shaking, or dropping.  
• Keep dust and grit from entering the  
camcorder’s cassette door. Dust and  
grit are abrasive and will cause  
excessive wear to both the camcorder’s  
recording/playback heads and cassettes.  
• Do not store the camcorder in  
temperatures below -22°F (-30C) or  
above 149°F (65C).  
• Always close the lens cover when the  
camcorder is not in use.  
• When the camcorder is not in use,  
always remove the cassette and  
AC adapter/charger or battery.  
• Before handling your camcorder, make  
sure your hands and face are free from  
any chemical products such as suntan  
lotion, as it may damage the finish.  
• Retain the original carton for future  
storage or shipping purposes.  
Things to Avoid  
• Do not operate the camcorder near the  
ocean as salt water or salt water spray  
may damage the internal parts of the  
camcorder.  
• Do not operate the camcorder for  
extended periods in temperatures below  
40°F (4C) or above 95°F (35C).  
• Do not expose the camcorder or  
adapter/charger to rain or moisture. If  
either component becomes wet, turn off  
the power and take the unit to an  
Authorized RCA Camcorder  
• Do not attempt to disassemble your  
camcorder. There are no user-  
serviceable parts inside.  
• Avoid operating your camcorder  
immediately after moving it from a cold  
location to a warm location. Give the  
camcorder 1-1/2 to 2 hours to reach a  
stable temperature before inserting a  
cassette. When the camcorder is  
moved from cold to warm,  
condensation may cause the tape to  
stick to the headwheel and damage the  
headwheel or tape.  
Servicenter.  
• Do not use an adapter/charger or  
batteries other than the ones specified  
for the camcorder. Use of the wrong  
accessories may cause damage to the  
camcorder.  
• Do not aim your camcorder at the sun  
or other bright objects.  
• Do not leave your camcorder in direct  
sunlight for extended periods of time.  
The resulting heat buildup could  
permanently damage the camcorder’s  
internal parts.  
• Do not operate the camcorder in  
extremely humid environments.  
75  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Specifications  
General  
Camera Section  
Power requirement: 6VDC  
Power consumption: 5.9 watts (normal)  
Weight: 1.7 lbs. (770g)  
Image Sensor: 1/4" CCD Imager  
Tripod Mount: One 1/4" x 20 threaded  
hole  
Dimensions – Including Viewfinder  
4-4/8"(W) x 4-1/2"(H) x 8-1/8"(D)  
111 (W) x 113(H) x 206(D) mm  
Lens: f1/1.2  
14:1 (4.1-57.4 mm)  
Filter Diameter: 46 mm  
Video Recorder Section  
Format: VHS-C  
AC Adapter/Charger  
Power requirement: 100-240 V, 50/60 Hz.  
Power consumption: 23 watts  
Weight: .7 lbs. (320g)  
Dimensions: 6"(W) x 1.7"(H) x 2.7"(D)  
150 (W) x 42(H) x 68(D) mm  
Record/Playback System:  
Four video record/playback heads  
One flying erase head  
Video Signal: EIA Standard NTSC  
color  
Viewfinder  
55" Color – 113K Pixel  
Information to User  
This equipment has been tested and  
found to comply with the limits for a  
Class B digital device and RF lighting  
device pursuant to Part 15 and part 18 of  
the FCC Rules. These limits are  
• Reorient or relocate the receiving  
antenna.  
• Increase the separation between the  
equipment and receiver.  
• Connect the equipment into an outlet on  
a circuit different from that to which  
the receiver is connected.  
designed to provide reasonable protection  
against harmful interference in a  
residential installation. This equipment  
generates, uses, and can radiate radio  
frequency energy and, if not installed and  
used in accordance with the instructions,  
may cause harmful interference to radio  
communications. However, there is no  
guarantee that interference will not occur  
in a particular installation. If this  
equipment does cause harmful  
interference to radio or television  
reception, which can be determined by  
turning the equipment off and on, the  
user is encouraged to try to correct the  
interference by one or more of the  
following measures:  
• Consult the dealer or an experienced  
radio/TV technician for help.  
Alterations or modifications carried out  
without appropriate authorization may  
invalidate the user’s FCC right to operate  
the equipment.  
This Class B digital apparatus meets all  
requirements of the Canadian  
Interference — Causing Equipment  
Regulations.  
Cet appareil numérique de la classe B  
respecte toutes les exigences du  
Réglement sur le matériel brouilleur du  
Canada.  
76  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Customer Assistance and Service  
Thomson provides a toll-free telephone  
You can reach Thomson at the  
following number:  
number to help you with any problems  
you may encounter with your camcorder.  
Many can be diagnosed over the phone,  
and if necessary, a replacement unit can  
be shipped to you. Please have your  
camcorder model/serial number and date  
of purchase ready when you call. If your  
unit is out of warranty, we will quote the  
cost of an exchange unit to you.  
800-283-6503  
(Toll free inside U.S.A.)  
Our toll-free Camcorder number  
operates from 8 a.m. to 5 p.m., CST  
Monday – Friday  
for U.S. customers only  
Returning equipment to Thomson for repair or exchange  
If we are unable to resolve your problem  
over the phone, we will gladly service  
your unit or exchange it for a new or  
refurbished camcorder. Refer to the  
limited warranty on the reverse side to  
learn about your specific rights and  
responsibilities.  
Always consult Thomson and get a  
Return Authorization number before  
returning anything! Obtain a Return  
Authorization (RA) number from the  
telephone representative before returning  
your equipment to avoid delays,  
accounting errors, or even loss of your  
unit.  
Important information to customers who ship defective equipment to  
Thomson Consumer Electronics  
The Thomson representative who  
authorized the return of your equipment  
will give you an RA number over the  
phone. They will also provide you with  
instructions on where and how to return  
your camcorder. Write the number in  
large, clear characters on the outside of  
the box. To avoid confusion and  
and model/serial number of your  
camcorder. These numbers are located  
on the bottom of your unit. If your  
camcorder is within the warranty period,  
please provide a copy of the bill of sale  
to verify purchase date. Use the original  
box and packing material to protect the  
equipment from damage in shipment.  
misunderstandings, shipments without an  
RA number clearly visible on the outside  
of the box will be returned to you at your  
expense.  
For your protection, insure all shipments  
for full replacement value and use a  
reliable shipper. Thomson assumes no  
responsibility for warranty shipments  
from the customer to the factory if not  
shipped in the manner prescribed by  
Thomson.  
Include a brief note describing the  
problem and any conversations about the  
problem you have had with Thomson  
personnel. Include your name, address  
77  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Limited Warranty  
What your warranty covers:  
• Any defect in materials or  
workmanship.  
which validates date of purchase to  
the exchange location and you will be  
provided the new or refurbished unit.  
4. If the repairs were covered by your  
warranty, you will not be billed.  
For how long after your purchase:  
• 90 days for labor charges.  
• One year for parts.  
If you are not located near an exchange  
point:  
What we will do:  
1. Provide your Discover, MasterCard or  
Visa account number and expiration  
date to our phone representative. This  
is for security purposes. If we receive  
your unit including all accessories  
within 14 days from the date you were  
provided a Return Authorization  
number, only items not covered by  
warranty will be charged to your  
account. IF YOUR UNIT  
During the initial 90 days  
• Exchange your camcorder with a new  
or, at our option, a refurbished unit or  
at your option, repair your camcorder  
at no cost to you.  
After the 90 days and within one year  
• Exchange your camcorder with a new  
or, at our option, a refurbished unit or  
at your option, repair your camcorder.  
Parts will be provided at no charge,  
but you will be responsible for the cost  
of labor required for the repair.  
INCLUDING ALL ACCESSORIES  
IS NOT RECEIVED WITHIN 14  
DAYS, THE SUGGESTED  
RETAIL VALUE OF THE  
CAMCORDER AND/OR  
How you get service:  
• Call 1-800-283-6503 and have your  
unit’s date of purchase and  
ACCESSORIES WILL BE  
model/serial number ready. The  
model/serial number information is on  
the bottom of your camcorder.  
CHARGED TO YOUR CREDIT  
CARD. This amount will be credited  
if the unit is subsequently received.  
2. We will send you a replacement unit  
next business day delivery.  
3. You will receive an invoice packed  
with the replacement product, but will  
not be charged for the unit portion of  
the invoice amount if we receive your  
unit including all accessories within  
14 days from the date you were  
provided the RA number. Any labor  
and parts charges not covered by our  
warranty will be included and charged  
against your account.  
• A representative will troubleshoot  
your problem over the phone. If the  
representative determines that you  
should receive a replacement unit, you  
will be provided with a Return  
Authorization (RA) number and the  
location of a nearby exchange point if  
one exists. No returns will be  
accepted without the RA number.  
To receive a replacement camcorder  
before you return yours:  
If you are located near an  
exchange point:  
1. We will send a replacement unit to the  
exchange point next business day  
delivery.  
2. The exchange location will notify you  
of its arrival.  
3. Take your unit, including all  
accessories, and your bill of sale  
4. Ship the unit back to us along with all  
accessories included with your  
camcorder using the replacement  
unit’s carton. Shipping instructions  
will be included in the carton along  
with your RA number, which will  
allow you to easily ship the unit back  
to us. Make sure you insure your  
78  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Limited Warranty  
shipment in case of damage or loss.  
Include with the shipment:  
• A copy of your dated bill of sale to  
verify your unit’s warranty  
eligibility.  
• A brief note describing your  
camcorder problem.  
To have your Camcorder repaired by  
an Authorized RCA Camcorder  
Servicenter:  
• Check with your dealer or call 1-800-  
336-1900 for the Authorized RCA  
Camcorder Servicenter nearest you.  
• Take your unit to the Authorized RCA  
Camcorder Servicenter of your choice.  
• Show the Authorized RCA Camcorder  
Servicenter representative your sales  
receipt or other, evidence of purchase.  
• Pick up your camcorder when repairs  
are complete.  
• Your name, address and phone  
number.  
Return transportation, storage, and  
handling costs and insurance are your  
sole responsibility. We accept no  
liability in case of damage or loss.  
What your warranty does not cover:  
• Adjustment of customer controls.  
• Damage from misuse or neglect.  
• A unit that has been modified or  
incorporated into other products or is  
used for institutional or other  
commercial purposes.  
• Battery for clock and other features.  
• Cleaning of video/audio heads.  
• Camcorders purchased or serviced  
outside the U.S.A.  
• Return transportation, storage and  
handling costs of your unit,  
including insurance for loss or  
damage.  
• Acts of God, such as but not limited to  
lightning damage.  
To receive a replacement unit after we  
have received your unit:  
1. Write the RA number on the outside of  
the carton used to return the unit.  
Make sure you insure your  
shipment in case of damage or loss.  
2. Carefully pack the unit along with all  
accessories included with your  
camcorder, using the original box and  
packing material if possible.  
3. Include with the shipment:  
• A copy of your dated bill of sale to  
verify your unit’s warranty  
eligibility.  
• A brief note describing your  
camcorder problem.  
• Your name, address and phone  
number.  
Product Registration:  
• Please complete and mail the Product  
Registration Card packed with your  
camcorder. It will make it easier to  
contact you should it ever be  
Return transportation, storage, and  
handling costs, and insurance are your  
responsibility. We accept no liability in  
case of damage or loss.  
4. Include a cashier’s check or money  
order for payment if there are any out  
of warranty labor or parts charges  
which were indicated by the  
representative, and you elected not to  
use your credit card.  
5. Upon receipt of your product, a new or  
refurbished unit will be shipped to you  
next day delivery.  
necessary. The return of the card is  
not required for warranty coverage.  
How State Law relates to warranty:  
• This warranty gives you specific legal  
rights and you may have other rights  
that vary from state to state.  
If you purchased your Camcorder  
outside the United States:  
• Contact your dealer for warranty  
information.  
79  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Index  
Copying Tapes . . . . . . . . . . . . . . . . . . .60-61  
COUNTER R/M Button . . . . . . .10,32,52-53  
Customer Assistance . . . .1,3,77,Back Cover  
Date and Time Displays . . . . . . . . . .26,46-49  
DATE/TIME/CHAR + and Buttons10,45,47  
DATE/TIME/CHAR SET Button . . .10,45,47  
Design Specifications . . . . . . . . . . . . . . . . .76  
Dew Warning . . . . . . . . . . . . . . . . . . . . . . .28  
Display Panel . . . . . . . . . . . . . . . . . . .9,37-42  
Displays, Camcorder Displays  
16x9 Indicators . . . . . . . . . . . . . . . .28-29,39  
16x9 Mode . . . . . . . . . . . . . . . . . . . . . . . . .39  
A. (Audio) DUB Button . . . . . . .16-17,52-53  
Accessories, Included . . . . . . . . . . . . . . . . . .3  
Accessories, Optional . . . . . . . . . . . . . .64-69  
Accessory, Order Form . . . . . . . . . . . . .67-69  
Adapter/Charger, Using . . . . . . . . . . . . .3,11  
Animation Indicators . . . . . . . . . . . .28-29,50  
Animation Recording . . . . . . . . . . . . . . . . .50  
Assistance . . . . . . . . . . . . .1,3,77,Back Cover  
Audio Dub Indicators . . . . . . . . . . .28-29,52  
Audio Dubbing . . . . . . . . . . . . . . . . . . .52-53  
AUDIO/RF DC/VIDEO OUT  
on TV . . . . . . . . . . . . . . . . . . .48-49,61,63  
Displays, Viewfinder . . . . . . . . . . . . . .26-29  
EDIT SEARCH + and – Buttons .10,22-23,31  
Edit Insert . . . . . . . . . . . . . . . . . . . . . . . . . .53  
Edit Insert Indicator . . . . . . . . . . . . .28-29,53  
EJECT Button . . . . . . . . . . . . . .4,9,21,22,57  
Electronic Indexing . . . . . . . . . . . . . . . . . .30  
Erase Protection . . . . . . . . . . . . . . . . . . . . .20  
Exposure Bar Indicator . . . . . . . . . . . . .26,42  
Exposure Control . . . . . . . . . . . . . . . . . . . .42  
Eyepiece Focus Control . . . . . . . . .7,9,22,25  
F1 and F2 Buttons . .9,22-23,37-42,44,48-49  
FADE Indicators . . . . . . . . . . . . . . .28-29,38  
Fading . . . . . . . . . . . . . . . . . . . . . . . . . . . . .38  
FF (Fast Forward) Button . . .10,16-17,31,57  
First-Time Operation . . . . . . . . . . . . . . .3-10  
Flying Erase Head . . . . . . . . . . . . . . . . . . .30  
Focus Displays . . . . . . . . . . . . . .26-27,40-41  
Focus Lock Feature . . . . . . . . . . . . . . . . . .40  
Focusing . . . . . . . . . . . . . . . . . . . . . . . .40-41  
Front-Light Mode . . . . . . . . . . . . . . . . . . . .35  
Handstrap . . . . . . . . . . . . . . . . . . . . . . . .5,10  
High-Speed Shutter Mode . . . . . . . . . . . . .35  
Included Accessories . . . . . . . . . . . . . . . . . .3  
INDEX Display . . . . . . . . . . . . . . . .28-29,30  
Indexing, Electronic . . . . . . . . . . . . . . . . . .30  
INSERT Button . . . . . . . . . . . . . . . .16-17,53  
Inserting and Removing Cassettes . . . . . . .21  
LENS COVER Control . . . . . . . .5,9,22,26-27  
Lens . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9  
Lens, Cleaning . . . . . . . . . . . . . . . . . . . . . .74  
LIGHT OFF•AUTO•ON  
Switch . . . . . . . . . . . . . . . . .9,22-23,54-55  
Light, Built In . . . . . . . . . . . . . . . . . . . .54-55  
Limited Warranty . . . . . . . . . . . . . . . . .78-79  
Maintenance and Care . . . . . . . . . . . . .74-75  
MAN (Manual) Mode . . . . . . . . . . . . . . . . .35  
MAN.W.BAL (Manual White Balance)  
Button . . . . . . . . . . . . . . . . . . . . . . .10,36  
Manual Focus . . . . . . . . . . . . . . . . . . . . . . .41  
Memory Stop Feature . . . . . . . . . . .32,52-53  
Microphone . . . . . . . . . . . . . . . . . . . . . . .9,30  
MODE Button 9,22-23,28-29,37-42,44,48-49  
MWB Indicator . . . . . . . . . . . . . . . . . . . . . .36  
Operation, First-Time . . . . . . . . . . . . . . .3-10  
Jacks . . . . . . . . . . . . . . . . . . . . . . . . .60,62  
Audio/Video Cable (Optional) . . . . . .3,60,64  
AUTO Mode . . . . . . . . . . . . . . . . . . . . . .7,35  
Auto Focus . . . . . . . . . . . . . . . . . . . . . . . . .40  
Auto Head Cleaner . . . . . . . . . . . . . . . . . . .31  
B (Bright) Control . . . . . . . . . . . . . . . . .10,72  
Back-Light Mode . . . . . . . . . . . . . . . . . . . .35  
BATT. RELEASE Button . . . . . . . . .10,11,13  
Battery, Care and Storage . . . . . . . . . . . . .14  
Battery, Clock . . . . . . . . . . . . . . . . .26-27,46  
Battery, Installing in Clock . . . . . . . . . . . .46  
Battery, Installing in Remote . . . . . . . . . . .18  
Battery Level Indicator . . . . . . . . . . . . .14,26  
Battery Marker Switch . . . . . . . . . . . . . . . .13  
Battery Safety Precautions . . . . . . . . . . . . .13  
Battery, Using Rechargeable . . . . . . . .12-14  
Bulb, Replacing for Light . . . . . . . . . . . . .55  
C (Color) Control . . . . . . . . . . . . . . . . .10,72  
Camcorder Lens, Cleaning . . . . . . . . . . . . .74  
Camcorder, Cleaning . . . . . . . . . . . . . . . . .74  
Camcorder, Powering . . . . . . . . . . . . . .11-15  
Camcorder, Turning On . . . . . . . . . . . . . . . .8  
Camcorder, Unpacking . . . . . . . . . . . . . . . .3  
Camera Edit Feature . . . . . . . . . . . . . . . . . .31  
Car Cord Adapter, Optional . . . . . . . . .15,64  
Care and Maintenance . . . . . . . . . . . . .74-75  
Care and Storage of Battery . . . . . . . . . . . .14  
Cassette Adapter . . . . . . . . . . . . . . . . . .58-59  
Cassette Door . . . . . . . . . . . . . . . . . . . . . .4,9  
Cassette Warning Indicator . . . . . . . . . .26-27  
Cassettes, Care and Storage . . . . . . . . . . . .21  
Cassettes, Inserting and Removing . . . . .4,21  
Cautions . . . . . . . . . . . . . .Inside Front Cover  
Charging the Battery . . . . . . . . . . . . . . . . .12  
Checking Problems . . . . . . . . . . . . . . . .70-73  
Cleaning Camcorder . . . . . . . . . . . . . . . . .74  
Clock Battery Indicator . . . . . . . . . .26-27,46  
Clock Battery, Installing . . . . . . . . . . . . . .46  
Clock Cell Compartment . . . . . . . . . . .10,46  
Color Enhancement Light . . . . . . . . .9,54-55  
Contents . . . . . . . . . . . . . . . . . . . . . . . . . .1-2  
Controls . . . . . . . . . . . . . . . . . . . . . . . . . .9-10  
80  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Index  
Optional Accessories . . . . . . . . . . . . . .64-69  
Order Form, Accessory . . . . . . . . . . . . .67-69  
PAUSE Button . . . . . . . . . . . . . .16-17,52-53  
SP•SLP/T20•30•40  
Switch . . . . . . . . . . .6,10,20,22,33,50-51  
START/STOP Button . . . . . . .16-17,43,50-51  
Status Displays . . . . . . . . . . . . . . . . . . .28-29  
STOP Button . . . . . . . . . . . . . . . . .8,10,16,57  
Stop-Action Pause . . . . . . . . . . . . . . . . . . .57  
Table of Contents . . . . . . . . . . . . . . . . . . .1-2  
Tally Light . . . . . . . . . . . . . . . . . .9,22-23,30  
TAPE END Display . . . . . . . . . . . . . . .28-29  
Tape Copying . . . . . . . . . . . . . . . . . . . .60-61  
Tape Length Display . . . . . . . . . . . .26-27,33  
Tape Positioning . . . . . . . . . . . . . . . . . . . .31  
Tape Time Remaining Display . . . .26-27,33  
Things to Avoid . . . . . . . . . . . . . . . . . . . . .75  
Thumb Trigger . . . . . . . . . . . . . . . . . . . .8,10  
Tilt, Viewfinder . . . . . . . . . . . . . . . . . . . . .25  
TIME LAPSE ANIM. REC/TIME  
PAUSE  
Indicator . . . . . . . . . . . .5,8,22-23  
Pause, Stop-Action . . . . . . . . . . . . . . . . . . .57  
PLAY Button . . . . . . . . . . . . . . . .16,52-53,57  
PLAY/PAUSE Button . . .8,10,52-53,57,61,63  
Playback . . . . . . . . . . . . . . . . . . . . . . . .57-63  
Playback Features . . . . . . . . . . . . . . . . . . .57  
Playback on a TV With  
AUDIO/VIDEO IN Jacks . . . . . . . . .60-61  
Playback on a TV  
Without Audio/Video Inputs . . . . . .62-63  
Playback, First . . . . . . . . . . . . . . . . . . . . . . .8  
Playback Speeds . . . . . . . . . . . . . . . . . . . . .20  
Playback, Viewfinder . . . . . . . . . . . . . . . . .57  
Plug Adapter . . . . . . . . . . . . . . . . . . . . . . .11  
Portrait Mode . . . . . . . . . . . . . . . . . . . . . . .35  
POWER CAMERA/OFF/VCR  
Button . . . . . . . . . . . . .16-17,28-29,50-51  
TIME LAPSE SELF INT./TIME  
Switch . . . . . . . . . .5,8,10,13-17,22-23,31  
. . . . . . . . . . .38-39,43,44,50-53,57,61,63  
Power Connector . . . . . . . . . . . . . . . . . . . .11  
Powering the Camcorder . . . . . . . . . . .11-15  
Problem Solving . . . . . . . . . . . . . . . . . .70-73  
Product Registration . . . .Inside Front Cover  
Proper Care and Storage . . . . . . . . . . . . . .75  
Quick Review Feature . . . . . . . . . . . . . . . .31  
Button . . . . . . . . . .16-17,28-29,43,50-51  
Time Counter . . . . . . . . . . . . . . . . . . . . . . .32  
Time Counter Display . . . . . . . . . . .26-27,32  
Time-Lapse Indicators . . . . . . . .28-29,50-51  
Time-Lapse Recording . . . . . . . . . . . . .50-51  
Tips, Recording . . . . . . . . . . . . . . . . . . . . .24  
Title, Creating New . . . . . . . . . . . . . . . . . .45  
Title Displays . . . . . . . . . . . .26,44-45,48-49  
Titler . . . . . . . . . . . . . . . . . . . . . . . . . . .44-45  
Titles, Preset . . . . . . . . . . . . . . . . . . . . . . . .44  
Titles, Recording . . . . . . . . . . . . . . .44,48-49  
TRACKING Buttons . . . . . . . . . .10,57,61,63  
Tracking . . . . . . . . . . . . . . . . . . . . . . . . . . .57  
Traveling Tips . . . . . . . . . . . . . . . . . . . . . .19  
Tripod, Using . . . . . . . . . . . . . . . . . . . . . . .65  
Trouble Checks . . . . . . . . . . . . . . . . . . .70-73  
Turning On the Camcorder . . . . . . . . . . . . .8  
Unpacking the Camcorder . . . . . . . . . . . . . .3  
User Information . . . . . . . . . . . . . . . . . . . .76  
Using Cassette Adapter . . . . . . . . . . . . .58-59  
Video Cassettes . . . . . . . . . . . . . . . . . . .20-21  
Viewfinder . . . . . . . . . . . .7,9,25,26-29,57,74  
Viewfinder Displays . . . . . . . . . . . . . . .26-29  
Viewfinder Playback . . . . . . . . . . . . . . . . .57  
Viewfinder, Cleaning . . . . . . . . . . . . . . . . .74  
Visual Searching . . . . . . . . . . . . . . . . . . . .57  
Warranty, Limited . . . . . . . . . . . . . . . . .78-79  
White Balance . . . . . . . . . . . . . . . . . . . . . .36  
White Balance Display . . . . . . . . . . . . .28,36  
ZOOM Buttons, Remote . . . . . . . . . . . .16,34  
Zoom Lever . . . . . . . . . . . . . . .9,22-23,26,34  
Zooming . . . . . . . . . . . . . . . . . . . . . . . . . . .34  
REC  
Indicator . . . . . . . . . . . . . . . .8,23  
Recording Speeds . . . . . . . . . . . . . . . .6,20,33  
Recording Tips . . . . . . . . . . . . . . . . . . . . . .24  
Recording, First . . . . . . . . . . . . . . . . . . . . . .8  
Recording, Making a . . . . . . . . . . . . . .22-23  
Refreshing the Battery . . . . . . . . . . . . . . . .12  
Registration Card . . . . . . .Inside Front Cover  
Remote Control . . . . . . . . . . . . . . . . . . .16-18  
Remote Control Sensor . . . . . . . . . . . . . .9,18  
REW (Rewind) Button . .8,10,16,31,52-53,57  
RF Output Adapter, Optional . . . . .62-63,66  
Safety Tab . . . . . . . . . . . . . . . . . . . . . . . . .20  
Scene Select AE  
Dial . . . . . . .7,9,22-23,26-27,35-42,44,48  
Searching, Visual . . . . . . . . . . . . . . . . . . . .57  
SELF INT.(Interval)/TIME  
Button . . . . . . . . . .16-17,28-29,43,50-51  
Self-Timer . . . . . . . . . . . . . . . . . . . . . . . . .43  
Self-Timer Indicators . . . . . . . . . . . .28-29,43  
Sensor, Remote . . . . . . . . . . . . . . . . . . . . .18  
Sepia Mode . . . . . . . . . . . . . . . . . . . . . . . .35  
Shoulder Strap, Attaching . . . . . . . . . . . . .56  
Shoulder Strap Attachment Rings . . . . .10,56  
Solving Problems . . . . . . . . . . . . . . . . .70-73  
Specifications . . . . . . . . . . . . . . . . . . . . . . .76  
Speeds, Recording and Playback . . . .6,20,33  
Sports Mode . . . . . . . . . . . . . . . . . . . . . . . .35  
Spotlight Mode . . . . . . . . . . . . . . . . . . . . . .35  
81  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Need Assistance? We want to help!  
U.S. Consumers:  
Camcorder Exchange Warranty . . . . . .800-283-6503  
Customer Service . . . . . . . . . . . . . . . . .800-336-1900  
Accessories . . . . . . . . . . . . . . . . . . . . .800-338-0376  
Canadian Consumers:  
English . . . . . . . . . . . . . . . . . . . . . . . . .800-522-0338  
French . . . . . . . . . . . . . . . . . . . . . . . . .800-522-0445  
If your camcorder needs service, please  
contact your dealer or the nearest Servicenter  
from the yellow pages. Please do not send  
any products to the Indianapolis address listed  
in this manual or on the carton. This will only  
add delays in service for your product.  
10330 N Meridian Street  
Indianapolis, IN 46290  
©
1996 Thomson Consumer Electronics, Inc.  
®
Trademark(s) Registered  
Marca(s) Registrada(s)  
Printed in Japan  
Part Number 96-CC634-1  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Q See Computer Hardware QSDT16PCRC User Guide
Radio Shack Caller ID Box CID 947 User Guide
Regalo High Chair 1662 User Guide
Renesas Switch HD74HCT1G66 User Guide
Rockford Fosgate Speaker RFD2110 User Guide
Roland Speaker System cm110 User Guide
Russell Hobbs Microwave Oven RHM1718B User Guide
Samsung Car Stereo System MCD MP67 User Guide
Samsung Projection Television HL S5679W User Guide
Samsung Tablet SM T310 User Guide