|
T
i
p
s
:
Tips:
N
o
t
e
:
N
o
t
e
:
Tips:
N
o
t
e
:
English
FCC Information
Safety Information
Important Information
•
Minimum distances around the apparatus
This device complies with Part 15 of the FCC
Safety Precautions
Technical Information
Product: Portable CD Radio
Brand: RCA
Model: RCD029/RCD030
For Your Safety
for sufficient ventilation.
For Your Records
In the event that service should be required, you
may need the model number. In the space below,
record the date and place of purchase:
Model No.
Rules. Operation is subject to the following
two conditions: (1) This device may not cause
harmful interference, and (2) this device must
accept any interference received, including
interference that may cause undesired
operation.
•
Never open the cabinet under any
circumstances. Any repairs or internal
adjustments should be made only by a
trained technician.
The AC power plug is polarized
u s e r
m a n u a l
(one blade is wider than the
other) and only fits into AC power
outlets one way. If the plug won’t
go into the outlet completely, turn
the plug over and try to insert it
the other way. If it still won’t fit, contact a
qualified electrician to change the outlet, or use a
different one. Do not attempt to bypass this
safety feature.
•
•
Never operate this product with the
cabinet removed.
Do not use your System immediately after
transporting it from a cold place to a
warm place, as condensation may cause
the system to malfunction.
Date of Purchase
Place of Purchase
In accordance with FCC requirements, changes
or modifications not expressly approved by
Thomson Inc. could void the user’s authority
to operate this product.
This device generates and uses radio
frequency (RF) energy, and if not installed and
used properly, this equipment may cause
interference to radio and television reception.
If this equipment does cause interference to
radio or television reception (which you can
determine by turning the equipment off and
on), try to correct the interference by one or
more of the following measures:
Electrical
Consumption
Power Supply: 120V ~ 60Hz
Power Consumption: 15 Watts
Service Information
•
•
Keep your unit away from humid areas
and abnormally hot places.
Do not touch the player with wet hands.
If any liquid enters the player cabinet,
take the player to a trained technician
for inspection.
This compact disc player uses a laser to
read the music on the disc. The laser
mechanism corresponds to the cartridge
and stylus of a record player. Although
this product incorporates a laser pick-up
lens, it is completely safe when operated
according to directions.
IMPORTER
This product should be serviced only by those
specially trained in appropriate servicing
techniques. For instructions on how to obtain
service, refer to the warranty included in this
Guide.
CAUTION: TO PREVENT ELECTRIC SHOCK,
MATCH WIDE BLADE OF PLUG TO WIDE SLOT,
FULLY INSERT.
Comercializadora Thomson de México, S.A. de
C.V.
•
•
The ventilation should not be impeded by
covering the ventilation opening with items,
such as newspaper, table-cloths, curtains, etc.
The rating plate is located at the bottom
cabinet of apparatus.
Álvaro Obregón No. 151. Piso 13.
Col. Roma. Delegación Cuauhtémoc
C.P. 06700. México, D.F.
Telefono: 52-55-11-020360
RFC: CTM-980723-KS5
Have a Blast-Just Not in your
eardrums!
•
Make sure you turn down the
volume on the unit before you
put on headphones. Increase
the volume to the desired level
only after headphone are in
place.
• Reorient the receiving antenna (that is, the
antenna for the radio or television that is
"receiving" the interference).
• Move the unit away from the equipment
that is receiving interference.
IMPORTADOR
Headset Safety
Comercializadora Thomson de México, S.A. de C.V.
Álvaro Obregón No. 151. Piso 13.
Col. Roma. Delegación Cuauhtémoc
C.P. 06700. México, D.F.
•
Do not play your headset at high volume.
Hearing experts warn against extended
high-volume play.
If you experience ringing in your ears,
reduce volume or discontinue use.
You should use with extreme caution or
temporarily discontinue use in potentially
hazardous situations.
Even if your headset is an open-air designed
to let you to hear outside sounds, do not
turn up the volume so high that you are
unable to hear what is around you.
• Plug the unit into a different wall outlet so
that the unit and the equipment receiving
interference are on different branch circuits.
If these measures do not eliminate the
interference, please consult your dealer or an
experienced radio/television technician for
additional suggestions.
Also, the Federal Communications Commission
has prepared a helpful booklet, "How To
Identify and Resolve Radio TV Interference
Problems." This booklet is available from the
U.S. Government Printing Office, Washington,
DC 20402. Please specify stock number 004-
000-00345-4 when ordering copies.
•
•
Discs rotate at high speed inside the
player. Do not use damaged, warped, or
cracked discs.
Telefono: 52-55-11-020360
RFC: CTM-980723-KS5
•
•
Do not touch the pick-up lens which is
located inside the disc compartment. To
keep dust from collecting on the pick-up
lens, do not leave the compartment door
open for an extended period of time. If
the lens becomes dirty, clean it with a
soft brush, or use an air blower brush
designed for camera lenses.
The apparatus shall not be exposed to
dripping or splashing and that no objects
filled with liquids, such as vases, shall be
placed on the apparatus.
No naked flame sources, such as lighted
candles, should be placed on the
apparatus.
Attention should be drawn to the
environmental aspects of battery disposal.
•
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
EXPORTER
Thomson Inc.
T H E L I G H T N I N G CAUTION: TO REDUCE THE
THE EXCLAMATION
•
P.O. Box 1976
FLASH AND ARROW-
HEAD WITHIN THE
RISK OF ELECTRIC SHOCK, POINT WITHIN THE
RCD029
RCD030
DO NOT REMOVE COVER T R I A N G L E I S
A
Indianapolis, IN 46206 - 1976
©2006 Thomson Inc.
Trademark(s) ® Registered
Marque(s) ® Deposée(s)
Marca(s) ® Registrada(s)
TRIANGLE IS
WA R N I N G
ALERTING YOU OF
A
WARNING
SIGN
( O R B A C K ) . N O U S E R -
SERVICEABLE PARTS IN-
SIDE. REFER SERVICING
TO Q U A L I F I E D S E RV I C E
PERSONNEL.
S I G N
ALERTING YOU OF
Don’t Infringe
I
I
M
P
T
O
R
R
U
T
T
A
I
N
O
T
S
This product complies with DHHS Rules 21 CFR
Subchapter J. Applicable at the date of
manufacture.
"
D
A
N
G
E
R
O
U
S
N
S
C
N
•
•
VOLTAGE" INSIDE
THE PRODUCT.
A C C O M PA N Y I N G
This product should only be used for the
purposes for which it is sold, that is,
entertainment, violating no copyright law. Any
attempts to use this product for unintended
purposes are unlawful and therefore not
condoned by Thomson.
T
H
E
P
R
O
D
U
C
T.
EN/F/E
RCD025
SEE MARKING ON BOTTOM / BACK OF PRODUCT
Printed in China / Impreso en China
WARNING:TO PREVENT FIRE OR ELECTRICAL
DO NOT EXPOSETHIS PRODUCT
It is important to read this instruction book prior to using your new product for the first time.
SHOCK HAZARD,
TO RAIN OR MOISTURE.
5625 4840 (EN/F/E)
Display
Before You Begin
General Controls
CD Playback
Selecting CD Mode
Radio
Selecting Radio Mode
Useful Advice
Top View
Battery Power
You can insert 6 C-sized alkaline batteries (not
supplied) and you can take your stereo just about
anywhere.
• Open the battery compartment door on the
bottom of the unit by pressing down on the tab
and pulling out the cover.
• Before inserting the batteries, observe the
polarities (that is, + and -) of the battery, then
relate the polarities to the engraved diagram
located on the battery compartment door. Insert
batteries in the battery compartment.
Back View
AC ~ IN - Insert the power cord here.
Playback Mode
In CD mode, press MODE repeatedly to select
among the following playback modes with icons
show on the display :
• Do not use your system immediately after
transporting it from a cold place to a warm
place, as condensation may cause the system
to malfunction. If moisture forms inside this
system, it may not operate properly. To correct
the problem, turn off the power and wait
about 30 minutes for moisture to evaporate.
• This system is fitted with a laser. To avoid
accidents, it is to be opened by qualified
technicians only.
• Never leave the tray open as dust could
cover the laser lens and/or the tray could be
bumped into accidentally.
• Do not place the system near wet areas such
as bathrooms and pool side. Avoid storing the
system at humid places or near abnormally
heated areas.
BAND AM/FM - Selects AM or FM band .
Slide the SELECTION switch to CD position.
Slide the SELECTION switch to RADIO
position to turn on the radio.
TUNING - Selects radio frequency.
Antenna - Extend the antenna for better radio
reception.
Extend or reposition the antenna for
better FM reception. Rotate the unit
for better AM reception.
SELECTION (
/ CD/ RADIO/
Loading Music
Press the PUSH TO OPEN button on the unit
front to slide disc tray out. Place a disc on
the disc tray with the label side facing up
and then push the disc tray back in.
•
•
REPEAT (flashes) - Repeats current track.
REPEAT - Repeats all tracks.
OFF) - Selects operation mode. To
Selecting Radio Band
Slide the BAND AM/FM switch to select FM or
AM band.
switch off the unit, select OFF.
Bottom View
OPEN - Push and slide to lift up the battery
compartment door.
PROGRAM - Enters CD program
•
•
- Random playback.
mode.
No icon - Normal playback.
MODE - Selects playback modes.
BASS - Turns bass boost on and off.
VOL. - Adjusts volume.
Tuning to a station
Turn the TUNING knob to select radio
frequencies.
Note that the AC line cord must be
unplugged from the jack on the back of the
unit to operate on batteries.
Playing and Pausing
1. In stop mode, press PLAY/PAUSE to
begin playback.
6. In CD mode - displays track information.
In radio mode - displays radio frequency.
1. Program mode is activated.
2. Repeat mode is activated.
3. Shuffle mode is activated.
4. Playback in progress.
PUSH TO OPEN - Push to open the mp3
device storage compartment door. Push the
door to close it.
The
icon is displayed.
• Power is continuously supplied to the
system. To disconnect power completely,
unplug the power cord from the power
outlet.
• Ensure minimum distance around the
apparatus for sufficient ventilation.The
ventilation should not be impeded by
covering the ventilation openings with items,
such as newspaper, etc.
• No naked flame source, such as lighted
candles, should be placed on the apparatus.
• Attention should be paid to enviornment
aspects of battery disposal.
Important Battery Information
7. Radio band.
2. During playback, press PLAY/PAUSE to
pause playback. Press again to resume.
8. AUX mode is selected for connecting with mp3
player.
•
Remove the batteries to avoid leakage if you
do not use your system for more than one month.
Discard leaky batteries immediately as leaking
The
icon flashes in pause mode.
mp3 Input
Selecting mp3 Input
•
5. Radio frequency unit.
batteries may cause skin burns or other personal
injuries. Dispose of batteries in the proper
manner, according to provincial and local
regulations.
Skipping and Searching
1. Press REV or F.FWD to skip to the
previous or next track respectively.
Connecting mp3 Player
•
Any battery may leak electrolyte under the
Open the mp3 storage compartment by pushing
PUSH TO OPEN on the top of the player. Insert
the audio cable into the mp3 player’s headphone
jack and start playback of the mp3 player. Close
the storage compartment.
Slide the SELECTION switch to
An mp3 player icon shows on the display.
position.
following circumstances:
Front View
REW - In CD mode - goes back to the previous
track or searches backward.
Sound Feature
- if mixed with a different battery type,
- if inserted incorrectly,
2. Press and hold REV or F.FWD to search
quickly current track backward or
forward respectively.
- if all batteries are not replaced at the same time,
- if disposed of in fire, or
- if an attempt is made to charge a battery not
intended to be recharged
• Be sure to remove batteries when storing the
set for more than 30 days. Leaky batteries can
badly damage the system. Be sure to dispose of
leaky, weak or dead batteries properly according
to federal, state, and local regulations. To prevent
injury or damage, do not reverse batteries and do
not mix battery type.
Bass Boost System
AC Power
Plug the power supply cord into the AC power
jack on the back of the unit, and into an AC
power supply outlet that accepts the plug
supplied with your unit.
PLAY/PAUSE - Starts and pauses playback.
Press BASS to turn the digital bass boost
F.FWD - In CD modes - goes to the next track
or searches forward.
system on and off.
Stoping Playback
Press STOP to stop playback.
Adjust volume by turning
VOL.
STOP - In CD modes - stops playback.
Control other playback operations on
the mp3 player.
PUSH TO OPEN - Opens disc tray. Push the
disc tray to close it.
CD Playback
Troubleshooting Tips
Maintenance
•
•
If a CD becomes dirty, wet a soft cloth in
water, wring it out well, wipe the dirt away
gently, and then remove any water drops
with a dry cloth.
Cleaning the exterior
Creating Programs
Displaying and Editing
Programs
Problem
Solution
•
Disconnect the system from AC power
before cleaning the exterior of the unit
with a soft dust cloth
System doesn’t turn
on
• Unplug the unit for a moment, and then plug it back in.
• Check the outlet by plugging in another device
•
Press PROGRAM repeatedly to recall and
display program. Program position shows
first, followed by track number.
Do not use record cleaning sprays or
antistatic agents on CDs. Also, never clean
CDs with benzene, thinner, or other volatile
solvents which may cause damage to disc
surface.
No sound
• Adjust volume setting.
• Make sure you’ve selected the correct function
•
Clean the exterior with a soft clean cloth
or slightly moistened chamois leather. DO
NOT use solvents as it may cause damage
to the unit.
•
The unit can program up
to 20 normal audio CD
tracks.
•
While track number is displayed, press REW
or F.FWD to edit track number. Press
PROGRAM to store newly selected track.
Poor radio
reception
• Adjust the antenna for better reception
• Try turning off electrical appliances near the unit, such as hair dryers,
vacuum cleaners, or fluorescent lights
Handling CDs
CD Lens Care
CD doesn’t play
• Make sure you’ve put a CD in the tray
• Make sure the CD’s label is facing up
• Try another CD
• Make sure that Pause mode is not activated
• Make sure CD function is selected
Deleting Programs
Press STOP in CD stop mode to delete all the
stored tracks.
•
When your CD lens gets dirty it can also
cause the system to output poor sound
quality. To clean the lens you will need to
purchase a CD lens cleaner which can
maintain the output sound quality of your
system. For instructions on cleaning the CD
lens, refer to the ones accompanying the lens
cleaner.
•
•
•
•
Do not touch the signal surfaces. Hold
CDs by the edges, or by one edge and
the hole.
In program mode, RANDOM
playback cannot be selected.
Do not affix labels or adhesive tapes to
the label surfaces. Do not scratch or
damage the label.
CD sound skips
• Clean the CD (as explained in “Maintenance”)
• Check CD for warping, scratches, or other damage
CDs rotate at high speeds inside the
player. Do not use damaged (cracked or
warped) CDs
Opening the CD compartment
door or switching mode will
delete all the stored tracks.
No sound in
mode
• Ensure volume of the mp3 player is turned up.
1. In CD stop mode, press PROGRAM to
enter program mode.
The PROGRAM icon flashes on the
display. “P01” (first program position)
shows briefly on the display followed by
“00” flashing.
Technical Specification
Power supply: 120V~60Hz
Dimensions ( H x W x D mm):
Unit size - 155 x 336 x 222
Weight: 1.87 kg
CD player: Response curve (+/- 2dB):
60Hz to 20 kHz
Rating Plate: Look for it at the bottom of the set.
Make sure CDs are stored in their original
case after use. Keep them away from
damp, humid or abnormally heated
places.
ESD Remark:
In case of misfunction due to electrostatic discharge just reset the product (disconnect and reconnect
of the power source may be required) to resume normal operation.
2. Press REW or F.FWD to select the track to
be stored.
3. Press PROGRAM to store the selected
track.
4. Repeat step 2 and 3 to continue
programming.
5. Press PLAY/PAUSE in program mode to
start program playback.
The unit remains in
program mode once
programming track is done.
Cleaning CDs
•
Dirty CDs can cause poor sound quality.
Always keep CDs clean by wiping them
gently with a soft cloth from the inner
edge toward the outer perimeter.
The descriptions and characteristics in this owner’s manual are for the purpose of general reference only and
not as a guarantee. In order to provide you with the highest quality product, we may make changes or
modifications without prior notice. The English version serves as the final reference on all product and
operational details should any discrepancies arise in other languages.
Download from Www.Somanuals.com. All Manuals Search And Download.
|