QSC Audio Car Speaker WL212 sw User Guide

WideLine-8  
WideLine™ Line Array Speaker System  
Features of the WL3082  
WL3082 | WL212-sw  
• Extraordinarily compact (only 20"/508 mm wide) and lightweight  
(38 lb/17.2 kg)  
• High acoustic output (133 dB SPL peak)  
• Wide 140° horizontal coverage  
• High power, 8" neodymium LF/MF drivers provide low-frequency extension  
to 62 Hz without subwoofers  
• 3" diaphragm compression driver on QSC’s patented 140º multiple diffraction  
aperture waveguide (Patent No. 7,177,437)  
• Simple, easy-to-use rigging system supports arrays of up to 12 units with  
10:1 design factor  
• Flexible ground stack capability  
• Fully supported in EASE and EASE Focus acoustic software  
Features of the WL212-sw  
• Dual 12" subwoofer in a 4th order bandpass enclosure  
• 135 dB SPL peak output capability  
• Frequency range to 32 Hz (-10 dB down point)  
• May be suspended at the top of a WL3082 array or behind the array  
• Integral suspension hardware also supports WL3082 in ground stack applications  
Designed for the most demanding concert and installation audio  
professionals, the WideLine-8 system sets new standards for astonishing  
acoustical performance and compact size.  
The WideLine-8 sub sets a new benchmark for extraordinary acoustic  
Line arrays are increasingly employed in a wider range of venues and  
applications. Frequently these venues have height or sightline restrictions  
that limit the placement and size of the array. Rising fuel costs are putting  
pressure on touring system providers to downsize their transportation  
requirements. At the same time, client and audience expectations for  
audio performance has never been higher. To meet these needs, QSC  
embarked on a program to develop the most compact, highest output line  
array speaker system available.  
output from a miniscule enclosure. At first glance, the enclosure seems  
too small to even house its pair of 4" voice-coil, long-excursion 12"  
woofers, yet it produces 135 dB (peak) SPL and has LF extension to  
32 Hz, with the punch needed for popular music. The extremely low  
profile of the WL212-sw sub (less than 15") also makes it a great choice  
for installed and portable use under a stage or in other tight quarters. The  
4th order bandpass design matches the width of the WideLine-8 elements  
allowing it to be flown inline with or behind a WideLine-8 array.  
QSC’s WideLine-8 packs full size line array performance into an ultra  
compact package measuring less than 20" (508 mm) wide and 9"  
(229 mm) high. The WideLine-8 applies to audio the classic hot rod, high-  
performance formula – putting the most horsepower available into the  
smallest chassis possible.  
Premium materials are used throughout the system. The enclosure is  
constructed of Baltic birch plywood and coated in an environmentally friendly,  
waterborne polymer finish that is field repairable. To keep the weight to a  
minimum and prevent rust, suspension fittings are made of aluminum.  
An elegantly simple 4-point suspension system combined with light weight,  
compact size and excellent handling ergonomics mean that a one person  
crew can easily deploy an array. A single AF3082-L array frame suspends  
up to twelve line array elements or up to twelve line array elements plus  
four subwoofers. The WideLine-8 system is equally at home in the air or  
ground-stacked.  
Each tri-amplified WideLine-8 element uses a pair of high-power,  
neodymium magnet, 8" low-frequency drivers. Both cover low frequencies  
while only one extends into the mid range, thus maintaining horizontal  
dispersion control at crossover. High frequencies are handled by a  
premium, 3" diaphragm, neodymium compression driver mounted to  
QSC’s patented, 140º multiple aperture diffraction waveguide. WideLine  
signature wide coverage delivers a broader stereo image, reduces the  
need for supplemental fill speakers and allows more placement options.  
Special attention is given to ground-stacked applications. The WideLine-8  
sub suspension system includes a unique provision that allows the lowest  
line array element stacked over a sub to be tilted up or down by as much  
as 10º, offering better coverage of listeners near the stage. WideLine-8  
subs may be used as a base for stacking up to six WideLine-8 elements.  
The waveguide exit extends nearly to the top and bottom of the enclosure to  
create a continuous acoustical source with minimal discontinuities between  
adjacent elements resulting in greatly reduced destructive interaction.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Specifications | Signal Processing  
WL3082  
WL212-sw  
Configuration  
Transducers  
Dual 8", 3-way, tri-amp line-array  
Dual 12", 4th order bandpass subwoofer  
High-frequency  
Low-frequency  
3" diaphragm, neodymium magnet compression driver  
Dual, 8" woofer, 2.5" voice coil  
Dual, 12" woofer with a 4" voice coil, ceramic magnet assembly  
Frequency Response ( 3 dB)  
Frequency Range (-10 dB)  
Nominal Impedance  
68 Hz – 18 kHz  
62 Hz – 20 kHz  
40 Hz – 100 Hz  
32 Hz – 107 Hz  
HF: 16Ω  
MF: 16Ω  
LF: 16Ω  
SUB: 4Ω  
Continuous Power Capacity1  
Sensitivity (1 W at 1 m)  
HF: 85 W  
MF: 250 W  
LF: 250 W  
LF: 1100 W  
HF: 108 dB SPL  
MF: 98 dB SPL  
LF: 98 dB SPL  
LF: 99 dB SPL  
Maximum Output, Continuous/Peak  
(dB SPL at 1 m)  
HF: 127 dB SPL / 133 dB SPL  
MF: 122 dB SPL / 128 dB SPL  
LF: 122 dB SPL / 128 dB SPL  
LF: 129 dB SPL / 135 dB SPL  
Nominal Coverage  
H: 140°  
V: dependent on number of elements used  
Enclosure Type  
Enclosure Material  
Finish  
Ported, trapezoidal  
4th order bandpass  
15 mm birch plywood  
15 mm birch plywood  
Available in black (WL3082) or white (WL3082-WH) paintable  
Perforated, 16AWG steel, backed with black/white cloth fabric  
2 x NL8 in parallel  
Available in black (WL212-sw) or white (WL212-sw-WH) paintable  
Grille  
Connectors  
Pin Outs  
2 x NL8 in parallel  
1+/1- NC; 2+/2- LF; 3+/3- MF; 4+/4- HF  
1+/1- Sub; 2+/2- NC; 3+/3- NC; 4+/4- NC  
Integral, non-adjustable  
Attachment Points  
Integral, side plate adjustable rigging system, vertical splay adjustable  
in 1° increments from 0° – 10°  
Weight (Net / Shipping)  
Dimensions (HWD)  
38 lb (17 kg) / 45.5 lb (20.7 kg)  
109 lb (49.4 kg) / 125 lb (56.7 kg)  
9" x 20" x 16"  
15" x 20" x 29"  
229 mm x 508 mm x 406 mm  
381 mm x 508 mm x 737 mm  
Available Accessories  
AF3082-S • AF3082-L • EB3082 • CP3082 • PB3082 • AF8-10  
AF3082-L • CP212 • AF3082-S  
See descriptions on back  
1) 2 hours, IEC specified noise  
Specifications subject to change without notice.  
WideLine-8 Signal Processing  
TheWL3082isdesignedfortri-amplification. AddingWL212-swsubwoofers response and extremely natural, uncolored sound across its frequency  
band and coverage area. An array of loudspeakers with Intrinsic Correction  
tunings will be very responsive to the use of equalization to compensate  
for array configuration, acoustical conditions or user preferences. For users  
needing sophisticated, programmable DSP, voicings are available for QSC  
BASIS™ processors.  
creates a 4-way active system. For applications in which audio quality is  
paramount but operational simplicity and low-cost are also critical, the QSC  
SC28 processor delivers factory programmed voicings while also offering  
user-adjustable system equalization, offset delays and output levels.  
QSC system engineers have employed the power of the SC28 processor’s  
FIR (finite impulse response) filters to implement Intrinsic Correction™ of  
the loudspeaker. Intrinsic Correction provides the most accurate acoustical  
magnitude, frequency and phase domain performance possible. Intrinsic  
Correction can compensate for many causal phenomena such as the  
effects of waveguide acoustical impedance and loudspeaker cone  
resonance. The result is a loudspeaker system with excellent power  
SC28  
BASIS 914lz  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Dimensions | Accessories  
WideLine-8  
WL3082  
21.7"  
551 mm  
16"  
406 mm  
19.9"  
505 mm  
9"  
228 mm  
Front  
Side  
Bottom  
Top  
Back  
21.7"  
551 mm  
WL212-sw  
29"  
736 mm  
20"  
505 mm  
15"  
15.2"  
380 mm 387 mm  
Front  
Side  
Bottom  
Top  
Back  
AF3082-L  
EB3082  
AF3082-S  
Large array frame, supports up to twelve (12) WideLine-8  
elements and four (4) WideLine-8 subs with 10:1 design factor.  
Extension bar, required for system with  
the subwoofers flown behind the main array.  
Small array frame, supports up to twelve (12)  
WideLine-8 elements with 10:1 design factor.  
AF8-10  
PB3082  
CP3082  
CP212  
Adapter frame that allows suspension  
of WL3082 under WL2012.  
Pullback bar for adjusting aiming angle  
of WideLine-8 arrays or suspension of  
certain small arrays.  
Caster pallet for four (4)  
WL3082 line array elements,  
includes padded cover.  
Caster pallet for three (3)  
WL212-sw subwoofers,  
includes padded cover.  
Specifications subject to change without notice.  
© 2009 QSC Audio Products, LLC. All rights reserved. QSC, the QSC logo, WideLine and BASIS are registered trademarks of QSC Audio Products, LLC in the U.S. Patent and  
Trademark office and other countries. Intrinsic Correction is a trademark of QSC Audio Products, LLC. All other trademarks are the property of their respective owners.  
Patents may apply or be pending.  
qscaudio.com  
1675 MacArthur Boulevard • Costa Mesa, CA 92626 • Ph: 800/854-4079 or 714/957-7100 • Fax: 714/754-6174  
WideLine-8 Spec Sheet 05/26/09  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Remington Power Tools Chainsaw 104317, PS1510A User Guide
Roberts Radio Portable Radio RD 50 User Guide
Rotel CD Player RCD 06 User Guide
Ryobi Tiller RY15550 User Guide
Samsung Clothes Dryer DV328 User Guide
Samsung MP3 Player YP T55 User Guide
Sanyo Battery Charger CR17450HE R User Guide
Sanyo Vacuum Cleaner SC X2017 User Guide
Sceptre Technologies Computer Monitor X246 User Guide
Sears Exercise Bike 831216411 User Guide