PYLE Audio Speaker System PCMX265W User Guide

PCMX265W  
PORTABLE SOUND SYSTEM FOR USB AND SD CARD  
USER'S MANUAL  
Download from Www.Somanuals.com. All Manuals Search And Download.  
FEATURES  
Microphone 1 balanced input with gain control.  
Instrument/Microphone 2 input with gain control.  
Auxuliary input with gain control (stereo RCA).  
Master Volume Control.  
Voltage Selector.  
Link Output jack  
Produce size:349x458x273mm(wxhxd)  
DIAGRAM AND PARTS DESCRIPTION  
DISPLAY PANEL:  
11 12  
13 14 151617 18 1920 21  
Push  
USB  
SD  
Track/Folder  
Search  
USB  
SD  
USB/SD  
Single  
Pitch  
Repeat  
Time  
Reverse  
Reloop  
OUT  
IN  
Loop  
6
9
1
2
3 4  
5
7 8  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1.  
CUE: To define and record a return point from which playback it again.  
2. PLAY/PAUSE: Each time you press the PLAY/PAUSE button, the operation changes from play to pause or from  
pause to play.  
3.  
REVERSE: Push the reverse button to play your track in reverse, push the reverse button again to  
cancel this feature.  
4. SKIP I<< BUTTON: Use this switch to restart the track or to select the last track.  
5. IN BUTTON (LOOP SYSTEM): This button sets the beginning point of the loop and light is illuminate.  
6. OUT BUTTON (LOOP BUTTON): When you press this button, you set the end point of the seamless loop  
and you start the loop. To finish the loop, press again this button.  
7. RELOOP BUTTON (LOOP SYSTEM): This button is used to start the last saved loop. To finish the loop,  
press the reloop button.  
8. SKIP >>I BUTTON: Use this knob to select the next track.  
9. ID3: When you pressing the ID3 button, Able to show the name of songs on led display.  
10. PITCH CONTROL: Use this fader to increase or decrease the speed of the track. Slide up to decrease the  
pitch and slide down to increase the pitch.  
11. DISPLAY: LCD Display lndicate the Track/Numbers/Time/Remain/Pitch/Continue/Single.  
USB PORT: Allows the connection of any USB memory stick.  
12.  
13.  
SD CARD SLOT: Slot for inserting SD card. The contacts of the card must point downwards. The  
unit cannot read cards with a capacity of more than 4GB. The unit is not compatible to SDHC cards  
and only.  
TIME BUTTON: Used this knob to choose the time mode, Elapsed time, remaining time or total remaining  
14.  
time.  
15. REPEAT BUTTON: Use this button to repeat one track or all the track of the CD.  
16.  
SINGLE: Press these to switch between the SINGLE and CONTINUE play mode. The selected mode is  
indicated on the LCD. In SINGLE mode, after each track, the unit stops the reading. In CONTINUOUS  
mode, the unit read all track and stops.  
17.  
USB/SD: To select audio source between USB storage and SD card.  
18. PITCH BEND - BUTTON: The pitch will drop while the - button is pressed and return to the original pitch when it  
is released.  
PITCH BEND + BUTTON: The pitch will automatically rise when the + button is pressed and return to the original  
19.  
pitch when it is released.  
20. PITCH BUTTON: If you this button, the adjustement of the pitch potentiometer is available.  
21. FOLDER/TRACK SEARCH: Allows you to navigate through folders or tracks similarly in either USB or CD mode.  
When navigating a standard CD turn the rotary to the right to advance the selection or turn the rotary to the left to  
decrease the selection.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CONTROL PANEL:  
MIC 1 BALANCED  
GAIN  
INSTRUMENT/MIC 2  
GAIN  
USB/SD/AUX  
GAIN  
MASTER  
VOLUME  
AUX  
POWER  
LEFT  
RIGHT  
ACTIVE SPEAKER WITH USB PLAYER HT-30530  
22  
23  
24  
25  
MICROPHONE 1 BALANCED INPUT WITH GAIN CONTROL(1/4” AND XLR):This jack can either take a 1/4”  
22.  
23.  
balanced or a XLR balanced cable. An XLR Cable is included with the microphone.  
INSTRUMENT/MICROPHONE 2 INPUT WITH GAIN CONTROL(1/4”): This mono input accepts a 1/4” input such  
as a microphone, guitar, or other musical instrument.  
USB/SD/AUXULIARY INPUT WITH GAIN CONTROL (STEREORCA): This knob controls the  
level of the USB/SD and the RCA input. This stereo RCA input can be used to connect a CD,  
MP3, or other audio source. To connect to a portable device with a 1/8” headphone jack, you  
need a standard (1/8” to RCA) adapter which is NOT included.  
24.  
MASTER VOLUME CONTROL: This knob controls the master volume of the.  
25.  
POWER PANEL:  
AC FUSE INPUT RANGE  
LINK  
CHARGE  
ON  
OUTPUT  
SOUND SYSTEM  
BATTERY LEVEL  
USB/SD  
115V  
230V  
ON  
LOW  
1
2
3
OFF  
OFF  
110-T750mAL 250V  
100-120V-60Hz 20W  
230-T315mAL 250V  
220-240V-50Hz 20W  
ATAKA SOUND GmbH, MAINZ GERMANY WWW.ATAKASOUND.DE  
MADE IN CHINA  
26  
27  
28  
29 30  
31  
26.POWER ADAPTER(IEC): Insert the included power cable here to charge the unit. Note that the can run off the  
power adapter while it simultaneously charges the battery. The charge indicator illuminates when the battery is  
charging.  
27.  
VOITAGE SELECTOR: Set this to the correct voltage for your location standard.  
28.POWER ON/OFF SWITCH  
29.USB/SD CHARGING SWITCH  
BATTERY LEVEL INDICATOR: While the unit is power ed ON, these four lights indicate the power left in the  
30.  
battery. Battery life varies based on volume and usage.  
LINK OUTPUT: This 1/4” jack is a stereo line level output that can be connected to the stereo input of an amplifier  
31.  
or amplified loudspeaker such as another.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
IMPORTANT NOTES  
Use this troubleshooting guide if: The sound is distorted at high volumes.  
Input is clipping: Try lowering the input gain or the volume control on your sound source or music  
instrument.  
Output is clipping: Lower the main volume level.  
There is too much bass: Try adjusting the tone or EQ control on your sound source to lower the  
bass level. this will allow you to play the music louder before clipping (distortion) occurs.  
The link cable: is being plugged into the instrument or MIC input instead of the RCA line input.  
Important: With all large speakers, initial "break-in" period is needed to perform at optimal levels.  
To properly "break-in" your, play an audio source at medium volume for a few hours.  
SPECIFICATIONS  
Input Voltage: AC 100-120V/ 60Hz 220-240V/ 50Hz  
Output Wattage: (Peak) 400W  
Output Wattage: (RMS) 400W, 1%THD  
Frequency Response: 70Hz~ 50kHz +/- 3dB  
Bottom pole mount specifications: Standard Pole Mount found at professional audio retailer:  
Depth 80mm (3.15”)  
Diameter 35.5mm (1.40”)  
Time required to fully charge the: under 4 hours  
Battery life: Over 12 hours* at full volume of full volume of the when fully charged.  
“Note: Battery life may vary based on temperature, age, and volume usage of product.  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Radio Shack Clock Radio 63 995 User Guide
RCA Telephone 25825 User Guide
Reebok Fitness Treadmill RBTL15990 User Guide
Renesas Computer Hardware 16 bit single chip microcomputer User Guide
Rockford Fosgate Stereo Amplifier T400 2 User Guide
Rosen Entertainment Systems GPS Receiver DP 1001 User Guide
Rotel Turntable RP 1010 User Guide
Sanyo Indoor Furnishings VSE 6300 User Guide
Sanyo Network Router SHA LN16UAB User Guide
SECO LARM USA TV Cables CA 1510 3FLQ User Guide