PROline
GAS COOKER
EFG 502
Download from Www.Somanuals.com. All Manuals Search And Download.
CONTENTS
Instructions for the installer
Instructions for the user
Important Safety Information
Description of the appliance
Technical Features
4
5
6
7
Safety Advice
Technical Data
Installation
15
15
16
16
16
16
16
-
-
-
-
Positioning
Ventilation
Location
Fitting the adjustable feet
Using the appliance
-
Before using the cooker for the
first time
7
7
8
9
-
-
-
-
Using the oven
Hints & Tips
Cooking with the grill
Using the Hob
Gas connections
17
17
10 Conversion to LP gas
Maintenance and Cleaning
Before you call for Service
12
14
How to read the instruction book
The symbols below will guide you when reading the
instruction book
Safety instructions
Step by Step Operation
Advice and recommendations
Environmental Information
3
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFETY INFORMATION
You MUST read these warnings carefully before installing or using the appliance.
Installation
• Ensure the control knobs are in the ‘OFF’
position when not in use.
• This cooker must be installed by qualified
personnel, according to the manufacturer’s
instructions and to the relevant British
Standards.
• This cooker is heavy. Take care when
moving it.
• When using other electrical appliances,
ensure the cable does not come into contact
with the hot surfaces of the cooker.
• Unstable or misshapen pans should not be
used on the hob burners as unstable pans
can cause an accident by tipping or spillage.
• Never leave the cooker unattended when
cooking with oil and fats.
• Any gas installation must be carried out by a
registered CORGI installer.
• Remove all packaging before using the
cooker.
• This cooker should be kept clean at all times.
A build-up of fats or foodstuffs could result in
a fire.
• Never use plastic dishes in the oven or on
the hob burners. Never line any part of the
oven with aluminium foil.
• Always ensure that the oven vent, which is
located at the centre back of the hob, is left
unobstructed to ensure ventilation of the
oven cavity.
• Ensure that the gas and electrical supply
complies with the type stated on the rating
plate, located near the gas supply pipe.
• Do not attempt to modify the cooker in any
way.
Child Safety
• This cooker is designed to be operated by
adults. Do not allow children to play near or
with the cooker.
• Perishable food, plastic items and aerosols
may be affected by heat and should not be
stored above the cooker.
• The cooker gets hot when it is in use.
Children should be kept away until it has
cooled.
Service
• This cooker should only be repaired or
serviced by an authorised Service Engineer
and only genuine approved spare parts
should be used.
• Children can also injure themselves by
pulling pans or pots off the cooker.
During Use
• This cooker is intended for domestic cooking
only. It is not designed for commercial or
industrial purposes.
Environmental Information
• After installation, please dispose of the
packaging with due regard to safety and the
environment.
• When disposing of an old appliance, make it
unusable, by cutting off the cable.
• When in use a gas cooker will produce heat
and moisture in the room in which it has been
installed. Ensure there is a continuous air
supply, keeping air vents in good condition or
installing a cooker hood with a venting hose.
• When using the cooker for a long period
time, the ventilation should be improved, by
opening a window or increasing the extractor
speed.
Keep this instruction book for future
reference and ensure it is passed on to any
new owner.
• Do not use this cooker if it is in contact with
water. Do not operate the cooker with wet
hands.
• The grill pan will become hot during use,
always use oven gloves when removing or
replacing a hot grill pan.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
DESCRIPTION OF THE APPLIANCE
Hob
2000W
1000W
semi-rapid
auxiliary
Control panel
155
170
190
300
285
270
210
230
250
Door handle
2
3
4
Oven door
glass
1
semi-rapid
rapid
2000W
2600W
Adjustable
feet
1. Front left burner (semi-rapid)
2. Back left burner (semi-rapid)
3. Back right burner (auxiliary)
4. Front right burner (rapid)
Control panel
Model : EFG 502
150
162
175
250
237
187
225
EFG 502
200
212
OVEN
THERMOSTAT/
GRILL
FRONT
LEFT
BURNER
CONTROL
KNOB
BACK
LEFT
BURNER
CONTROL
KNOB
BACK
RIGHT
BURNER
CONTROL
KNOB
FRONT
RIGHT
BURNER
CONTROL
KNOB
CONTROL
KNOB
5
Download from Www.Somanuals.com. All Manuals Search And Download.
TECHNICAL FEATURES
Free standing
Hob
Class 1
Pan support
Enamelled
Front right burner
Back right burner
Front left burner
Back left burner
Rapid
2,60 kW
1,00 kW
2,00 kW
2,00 kW
Auxiliary
Semi rapid
Semi rapid
Oven power
Grill power
3,20 kW
2,50 kW
Oven
Chromed
Enamelled
Enamelled
Oven shelf
Grill pan
Heat deflection shield
Accessories
Height to the hob
Width
Depth
880 - 890 mm
500 mm
600 mm
Dimensions
This appliance complies with the following
EEC Directives :
90/396 (Gas Appliance Directive)
93/68 (General Directives) and subsequent
modifications.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
USING THE APPLIANCE
Before using the cooker for the first time
Remove all packaging both inside and
outside of the cooker, before using it.
Before using for the first time, the oven should be
heated without food. During this time, an
unpleasant odour may be emitted. This is quite
normal.
1. Remove the oven accessories and ensure all
packaging has been removed.
2. Ignite the oven burner (see instructions) and
turn the control knob to 250 degrees C .
3. Open a window for ventilation.
4. Allow the oven to run empty for
approximately 45 minutes.
This procedure should be repeated with the grill
function for approximately 5-10 minutes.
Using the Oven
The cooker gets hot when it is in use.
Children should be kept away until it
has cooled.
Attention: when turning on the oven and
grill burner the oven door has to be
opened.
The oven has three shelf levels, and is supplied
with one shelf.
The shelf positions are counted from the bottom
of the oven as shown in the diagram.
Do not place cookware or foil directly
on the oven base.
Oven Safety device
The cooker features a thermocouple; if for
any reason the flame should extinguish, the
device will stop the gas flow.
Use
The oven can be used for traditional cooking, or
for grilling, but not both functions simultaneously.
150
162
By turning the oven thermostat control knob
anticlockwise different heat settings can be
selected between 150 - 250 degrees C for the
oven.
175
187
250
237
To select the grill function turn the
oven
thermostat control knob fully anticlockwise to the
grill symbol.
200
225
212
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Ignition
Attention: when turning on the oven and
grill burner the oven door has to be
opened.
• Open the oven door and lift the small flap on
the bottom of the oven cavity.
• Hold a lit match or taper to the oven burner.
• Push and turn the oven thermostat control
knob in a anticlockwise direction to the
maximum position 250 degrees C.
• Hold in the knob for approximately 15
seconds to allow the flame failure device to
energise.
150
162
250
237
175
187
225
200
212
• Release the control knob, check that the
burner has ignited correctly.
• Close the flap and the oven door.
If for any reason the flame should extinguish turn
the control knob to the off position.
After a least 1 minute try to re-ignite the oven
following the procedure as above.
Cooking in the Oven
Traditional cooking is made by natural
convection; the heated air circulates on the
principle of ascending and descending draughts.
It is necessary to pre-heat the oven.
All cookers vary and it is important to be
aware
of
the
approximate
cooking
temperatures before you use the cooker.
It may be necessary to adjust the temperature to
suit
your
individual
requirements.
Only
experience will enable you to determine the
correct setting for your personal requirements.
Hints and Tips
Condensation and steam
When food is heated it produces steam in the
same way as a boiling kettle. The oven vents allow
some of this steam to escape. However, always
stand back from the oven when opening the
oven door to allow any build up of steam or heat
to release.
If the steam comes into contact with a cool surface
on the outside of the oven, e.g. a trim, it will
condense and produce water droplets. This is quite
normal and is not a fault with the oven.
To prevent discolouration, regularly wipe away
condensation and also soilage from surfaces.
Cookware
Use any ovenproof cookware, which will withstand
temperatures of 250 degrees C.
Oven dishes, etc. should not be placed directly
on the oven base.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Cooking with the grill
A
Whenever the grill is in use the heat
deflection shield must be fitted to prevent
the overheating of the control knobs and
facia panel.
• First of all fit the heat deflection shield "A"
• Hold a lighted match or taper to the grill
burner.
• Push and turn the oven thermostat control
knob in a clockwise direction to the grill
symbol.
• Hold in the knob for approximately 15
seconds to allow the flame failure device to
energise.
• Release the control knob, check that the
burner has ignited correctly.
• If for any reason the flame should extinguish
turn the control knob to the off position.
• After a least 1 minute try to re-ignite the grill
following the procedure as above.
• The oven door must be left halfway open
when cooking with the grill.
150
162
You may find it useful to put a small amount of
water into the oven tray, the water will help to
prevent the fat splashing and keep the food
moist while cooking.
175
187
250
237
200
225
212
Accessible parts may become hot when
the grill is in us. Children should be kept
away.
The grill pan will become hot during
use, always use oven gloves when removing
or replacing a hot grill pan.
150
162
250
175
237
187
225
When grilling, only the top burner is heating. It is
not necessary to preheat the grill.
200
212
Safety
In the interest of safety, remember that the heat
deflection shield and accessible parts become
extremely hot when the grill is in use and will
stay hot for some time after the grill has been
turned off.
Avoid skin contact with all hot surfaces and
always keep children away from the cooker
when the grill or oven is in use.
Always use oven gloves when handling the oven
tray and oven shelf as they will become very hot
when in use.
In the interest of safety do not leave the grill
unattended when in use as the high
temperatures can quickly cause the food to burn
and could lead to a grill fire.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Hob
The Hob Burners
The symbol on the knob corresponds to a symbol
on the control panel (See description of appliance).
Off
Maximum level
Minimum level
Use the maximum position for boiling and the
minimum for simmering.
Always choose positions between the minimum
and maximum, never between maximum and off.
Ignition of the burners
• Push the corresponding control knob in
completely and turn it anti-clockwise to the
“large flame” symbol and ignite with a match.
• Release the control knob and ensure that the
burner has ignited. Upon ignition, adjust the
flame as required.
• If for any reason the flame should extinguish
turn off the relevant control knob, leave for at
least one minute and then re-ignite.
Extinguishing of burners
Turn thecontrol knob clockwise to the off positon
« ».
Safety
The hotplate has been designed to be as safe as
possible in use. Keep all pan handles turned to a
safe position so that they are out of reach of
children and they can not be accidentally
knocked as you walk past.
Safety Recommendations for Deep Fat Frying
Use a deep pan.
Never fill the pan more than one third full.
Do not overload the pan by trying to fry too much
food at one time.
The pan should never be more than two thirds
full with food and fat or oil.
Dry food thoroughly on kitchen paper before
frying and always lower the food slowly into the
fat or oil.
Keep the outside of the pan clean and free from
streaks of fat or oilt.
Never leave fat or oil unattended during the
heating or cooking period.
Do not put anything on the hob that is
liable to melt.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Correct
Selecting the Correct burner
Above every control knob there is a symbol for the
corresponding burner.
For good cooking results, always choose pans,
which correctly fit to the diameter of the burner
used (see figs). Choose thick, flat bottom pans.
We recommend the flame is lowered as soon as the
liquid starts boiling.
Incorrect
The following diameter pans can be used:
Power
(kW)
2,60
Diameter (mm)
Burner
Rapid
min.
165
140
120
max.
260
220
160
Semi-Rapid
Auxiliary
2,00
1,00
Accessories
appliance
delivered
with
the
The following accessories are supplied with your
appliance.
-
-
-
1 Oven shelf
1 Oven tray
1 Heat deflection shield
In addition to the accessories supplied we
recommend you only use heatproof dishes/pans
(according to the instructions of the manufacturer).
11
Download from Www.Somanuals.com. All Manuals Search And Download.
MAINTENANCE AND CLEANING
The oven should be kept clean at all
times. A build-up of fats or other
foodstuffs could result in
especially in the grill pan.
a
fire,
Before cleaning, ensure all control
knobs are in the OFF position, and the
appliance has cooled completely.
Cleaning materials
Before using any cleaning materials on your
oven, check that they are suitable and that their
use is recommended by the manufacturer.
locking parts
Cleaners that contain bleach should
NOT be used as they may dull the
surface finishes. Harsh abrasives
should also be avoided.
External cleaning
Regularly wipe over the control panel, oven door
and door seal using a soft cloth well wrung out in
warm water to which a little washing up liquid
has been added.
To prevent damaging or weakening the
door glass panels avoid the use of the
following:
• Household detergent and bleaches
• Impregnated pads unsuitable for non
stick saucepans
• Brillo/Ajax pads or steel wool pads
• Chemical oven pads or aerosols
• Rust removers
• Bath/Sink stain removers
Oven Door
-
The door can be dismantled for cleaning as
follows:
-
-
Open the door completely
DO NOT clean the oven door while the
glass panels are warm. If this
precaution is not observed the glass
panel may shatter.
If the door glass panel becomes
chipped or has deep scratches, the
glass will be weakened and must be
replaced to prevent the possibility of
the panel shattering.
Revolv the two locking parts on the hinge
arms completely up.
-
-
Partially close the door, to a 30o angle
Lift the door and pull out
The internal
removed for cleaning. For this
remove the 2 fixing screws.
and inner
water.
Always support the door while removing the
glass panel as the door may spring closed due
to its lighter weight.
oven door glass
can be
purpose
Clean the outer
door glass using warm soapy
Contact your local Service Centre who
will be pleased to advise further.
IMPORTANT: The inner door glass must be in
place when using the oven.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Oven Cavity
The enameled oven cavity is best cleaned whilst
the oven is still warm.
Wipe the oven with a soft cloth soaked in warm
soapy water after each use. From time to time it
will be necessary to do a more thorough
cleaning, using a proprietary oven cleaner.
Hob
After every use wipe with a soft cloth well wrung
out in warm water to which a little washing up
liquid has been added, avoiding any leakage
through the holes of the hob. Rinse and dry with
a soft cloth.
To remove more stubborn stains, wet and leave
to dissolve, do not scratch and avoid the use of
abrasive or caustic products that could damage
the enamel.
Burner cap
Burners
Burner
ring
The burner caps and crowns can be removed
for cleaning.
Wash the burners caps and crowns using hot
soapy water, and remove marks with a mild
Burner
budy
paste
cleaner.
A
well-moistened
soap
impregnated steel wool pad can be used with
caution, if the marks are particularly difficult to
remove.
After cleaning, be sure to wipe dry with a soft cloth.
Do's and Don't
DO treat all glass surfaces with care to avoid
DO NOT use small pans on large burners.
Damage or breakage
DO NOT overfill pans.
DO read the user instructions carefully before
Using the cooker for the first time.
DO NOT allow fat or oils to build up in the
oven trays or oven base…
DO Allow the oven to heat for 45 minutes
Before using for the first time, in order to
expel any smell from the new oven, without
introduction of any food
DO NOT place cooking utensils
Or plates directly onto the oven base.
DO NOT grill food containing
Fat without using the grid.
DO ensure that the stability chain has been
Fitted.
DO NOT cover the grilling
grid with aluminium foil.
DO ensure that pan handles are turned to a safe
Position.
DO NOT use the oven trays
for roasting.
DO use pans with lids.
DO NOT place hot enamel parts
In water, leave them to cool first.
DO follow the safety information given on
Deep fat frying.
DO NOT allow vinegar, coffee
Milk, salted water, lemon or
tomato juice to remain in contact
With enamel parts.
DO always fit the heat deflection shield when
Grilling and remember that it does become hot
When in use and will remain hot for some time
After the grill is turned off.
DO clean your oven regularly.
DO NOT use abrasive cleaners
Or powders that will scratch the
Surface of the enamel.
DO remove any spills as soon as they occur.
DO always use oven gloves when removing food
Shelves and trays from the oven.
DO NOT allow children near the
Cooker when in use.
DO NOT attempt to repair the cooker.
Always consult a Qualified installer or contact
Your local Comet Service Centre
13
Download from Www.Somanuals.com. All Manuals Search And Download.
BEFORE YOU CALL FOR SERVICE
If the appliance is not working correctly, please carry out the following checks, before contacting your
local Comet Service Centre.
Symptoms
1. No burner ignition
Solutions
Check that:
•
•
•
•
Gas supply is completely open
The position of gas pipe is right
The burner is not wet
The burner cap and ring have been replaced
correctly after cleaning
2. The gas ring burns unevenly
Check that:
•
The main jet is not blocked and the burner
ring is clean of food particles
•
The burner cap and ring have been replaced
correctly after cleaning
3. The oven or grill burner will not ignite.
Check that:
•
•
•
The burner is in its correct place
The burner is not wet
The control knob has been pressed in and
held for 15 seconds upon ignition
4. Cooking results are not satisfactory
5. The oven smokes
Check that:
•
The correct temperature has been selected
Check that:
•
•
The oven does not need cleaning
The food has not spilled over onto the base
plate
•
There is no excessive fat / juice on the oven
sides
If after these checks, the appliance still does not operate correctly, contact your local Comet Service
Centre or ring 0870 5425425 to arrange for a Service Engineer to call.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTRUCTIONS FOR THE INSTALLER
SAFETY ADVICE
-
Installation of flues and ventilation for
gas appliances of rated input not
exceeding 60 kW (1st, 2nd and 3rd family
Important
This appliance is supplied for use on
NATURAL GAS ONLY and cannot be used
for any other gas without modification.
Conversion for use on other gases must only
be undertaken by a qualified person. For
information for use on other gases contact
your local Comet Service Centre.
gases)
–
Part
2
Specification for
installation of ventilation for gas
appliances – BS 5440;
-
-
Gas burning appliances
–
Part
3
Domestic cooking appliances burning
gas – BS 5386;
Specification for installation of low
pressure gas pipe work of up to 20mm
(R1) in domestic premises (2nd family
gas) – BS 6891;
Pipe threads for tubes and fittings where
pressure-tight joints are made on the
threads (metric dimensions) – BS 21:
1985;
Flexible hoses, end fittings and sockets
for gas burning appliances – BS 669;
The cooker must be installed by a qualified
person in accordance with the gas safety
(Installation
Regulations 1990 and the relevant building
/I.E.E. regulations.
and
use)
(amendment)
-
Failure to install the appliance correctly
could invalidate any manufacturers warranty
and lead to prosecution under the above
quoted regulations.
-
Installation of domestic gas cooking
appliances (1st, 2nd and 3rd family gases) – BS
6172: 1990;
In the UK C.O.R.G.I. registered installers are
authorised to undertake the installation and
service work in compliance with the above
regulations. All Comet authorised installers
are C.O.R.G.I. registered.
TECHNICAL DATA
Table no.1
(Cat : II
)
2H3+
Normal Economic
By-
pass
(mm)
Nozzle
diameter
(mm)
Cons
m3/h
Pressure
(mbar)
power
(kW)
power
(kW)
Burner
Gas Type
g/h
Natural Gas
Butane
Propane
Natural Gas
Butane
Propane
Natural Gas
Butane
Propane
Natural Gas
Butane
1.12
0,86
0,86
0.96
0,71
0,71
0.70
0,50
0,50
1.30
0,88
0,88
1,15
0,80
0,80
0.248
0.191
0.093
0.305
0,238
20 mbar
28-30mbar
37mbar
20 mbar
28-30mbar
37mbar
20 mbar
28-30mbar
37mbar
20 mbar
28-30mbar
37mbar
RAPID
2.60
2.00
1.00
3.20
2.50
0.72
0.43
0.35
1.00
-
0.42
0.32
0.29
0.46
-
188,8
SEMI-
RAPID
145,2
72,6
AUXILIARY
OVEN
232,4
181,5
Propane
Natural Gas
Butane
20 mbar
28-30mbar
37mbar
GRILL
Propane
15
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLATION
Positioning
Remove all the packaging and install the cooker
in a dry well, ventilated room away from curtains,
paper, alcohol, petrol etc. (See figure).
610 mm
This appliance is approved to class “1” regarding
overheating of surrounding surfaces.
150 mm
Pro
line
G
3
5
It is mandatory to keep 20 mm distance from the
adjacent furniture.
L.P.G. cookers or ovens MUST NOT be
20 mm
20 mm
installed below ground level, i.e. in
a
basement, or aboard any boat, yacht or
other vessel.
Stability
hook
The cooking appliance must be fitted
with a stability chain firmly secured to
the wall (see fig)
Firmly fix
chain to rear
of cooker
Chain to be as
short as
Stability
chain
practicable
Ventilation
If there are other fuel burning appliances in the
same room, B.S. 5440: Part. 2: Current Editions
should be consulted to determine the requisite air
vent requirements.
The room containing the cooker should have an
air supply in accordance with B.S. 5440: Part 2:
Current Editions.
The following requirements for ventilation must
be met.
The cooker should not be installed in a bed
sitting room with a volume of less than 20m3, if it
is installed in a room of volume less 5m3 an air
vent of effective area of 110cm2 is required; if it is
installed in a room of volume between 5m3 and
10m3, an air vent of effective area 50cm2 is
required, while if the volume exceeds 11m3 no air
vent is required. However, if the room has a door,
which opens directly to the outside, no air vent is
required even when the volume is between 5m3
and 11m3.
Location
The cooker may be located in a kitchen, a
kitchen/diner or bed sitting room but not in a
bathroom, shower room or garage.
For information regarding the fitting of flexible
supply pipes, the highest temperature at the rear
of this cooker which may come into contact with
the supply pipe is 70°C above ambient.
L.P.G. cookers or ovens MUST NOT be
installed below ground level, i.e. in
basement, or aboard any boat, yacht or other
vessel.
a
Fitting the adjustable feet
Unpack the support brackets with the feet
attached.Place a piece of cloth/cardboard onto
your floor to protect both your floor and the
cooker.
Lay the cooker on its back, fit the support
brackets (see fig) using the bolts, washers and
nuts supplied and ensure that the nuts are tight.
lift the cooker upright onto its feet.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
1
Fitting the adjustable feet
Unpack the support brackets with the feet
attached. Place a piece of cloth/cardboard onto
your floor to prtect both your floor and the cooker.
Lay the cooker on its back, fit the support
brackets (see fig) using the bolts, washers and
nuts supplied and ensure that the nuts are tight.
lift the cooker upright onto its feet.
Levelling the cooker and fitting the plinth
• Unscrew the legs as far as possible (approx.
16mm from fully screwed in).
4
5
• Place the plinth (pos.3) so that the springs
(pos.2) reach the threaded area of the legs
and the clamp of the plinth (pos.4) is in front
of the holes (pos.5) on the under side of the
structure.
3
2
1
• Push the plinth towards the appliance with
both hands until the springs fasten on the legs
and the clamps go into the corresponding
holes.
• Adjust the legs as necessary.
GAS CONNECTIONS
Note: It is recommended that the gas
connection to the cooker is installed with a
flexible tube made to BS5386.
CONVERSION TO LP GAS
Your cooker is designed to work with natural
gas, propane or butane.
Stick the label supplied with the
appliance (in the nozzles bag) corresponding
to the gas type utilised.
To purchase a LPG conversion kit speak to the
Retail Store from where you purchased the
product.
The conversion must only be carried out by a
corgi registered engineer and when cjhanging
injectors to a different type of gas supply the
instructions on adjustment and installation on
the particular category of gas supply must be
observed. After the conversion always carry out
the gas leak test, seal any adjustment or
preadjustment parts and affix a label to the
appliance in place of the old one, relative to the
new gas adjustment.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Hob burners
•
•
•
Remove the pan support;
Remove the caps and the burner crowns;
Using a No 7 socket spanner unscrew the
injectors and replace them with those
required for the type of gas in use (see table
no. 1).
Reassemble the parts following the same
procedure in reverse.
These burners do not need any primary air
regulation.
Adjustment of minimum level for the hob
burners
The burner is correctly adjusted when the flame
is stable silent and goes out without any noise.
When changing the type of gas check that the
minimum level is correct. The air admission is
correct
when the flame is about 4 mm in
length.
Check that, turning the control knob quickly from
the maximum position to the minimum one, the
flame does not go out.
Hob burners
To adjust the minimum level:
•
•
Light the burner
Turn the control knob to the position of the
minimum flame;
•
•
Remove the control knob;
Adjust the by pass screw (situated to the
right of the tap shaft) until a regular small
flame is reached.
•
For LPG screw the by pass screw in
completely.
Reassemble the parts following the same
procedure in reverse.
Check that, when turning the control knob quickly
from the maximum position to the minimum one,
the flame does not go out.
Replace the injector of the oven burner
Oven burner
To replace the gas oven injector, follow this
procedure:
•
•
•
Check the table no.1 for diameter of injector;
Remove the oven base panel;
Loosen the nut on the oven burner rod at the
rear of the oven;
•
•
Remove the oven burner by pushing it
backwards.
Replace the injector by means of a No 10
socket spanner;
Reassemble the parts following the same
procedure in reverse.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Table no.2
Gas type
Grill burner
To replace the grill injector, follow this procedure:
Air adjusting (mm)
•
•
•
Remove the grill burner after removing the
fixing screw.
Replace the injector by means of a No 10
socket spanner;
Oven
2,5
3,5
Grill
25,5
24
G20
G30
G31
3,5
24
Refit all parts and test.
Flame adjustment
Oven burner
The burner is correctly adjusted when the flame is
stable, silent and goes out without any noise.
• When the flames are too short, the injector is
whistling or the flames have the tendency to
detach from the burner, it means that there is
too much air in the burner. If there is too much
air there is a risk that the flames will extinguish.
• But, if the flames are too long, soft, lighting,
there is not enough air in the burner. These
flames discolour the bottom of pans.
M
A
• Loosen screw M which secures the air adjuster A;
• Move the air adjuster A forward or backward
until achieving the right mixture (see table no.
2);
opening
• Tighten the securing screw M.
Grill burner
• Loosen the screw securing the Venturi.
• Move the adjusting collar left or right until
achieving the correct flame patten (see table no.
2).
adjustment collar
screw
• Tighten the securing screw.
Adjustment of minimum level
Oven burn
•
•
•
•
•
•
Remove the pan support as well as the burner
caps and the burner crowns.
Unscrew and remove the 2 hob top fixing
screws and remove the hob top.
Light the burner to 250 degrees C and leave
the oven door closed for about 10 min.
Turn the thermostat control knob slowly to 150
degrees C.
Pull off the thermostat control knob to adjust
minimum flow.
Unscrew or screw the by-pass screw (it is
above the tap shaft) until a regular small flame
is reached.
•
For LPG screw the by pass screw in
completely
The flame shouldn’t extinguish when closing the
oven door.
Grill burner
The grill temperature cannot be adjusted. To obtain
a lower temperature or slower cooking time the grill
pan must be lowered away from the flame.
AFTER COMPLETION OF ANY REPAIRS,
ADJUSTMENTS OR CONVERSION THE STATUTORY
SAFETY TESTS MUST BE CARRIED OUT.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
.
Download from Www.Somanuals.com. All Manuals Search And Download.
|