Proctor Silex Iron 840091400 User Manual

Use & Care for Steam Irons ............................2  
USA: 1-800-851-8900  
840091400  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Before First Use  
Features (not all features on all models)  
• Steam vents should be cleaned before first use. Prepare  
iron for steam ironing, then iron over an old cloth for a few  
minutes while letting the iron steam.  
• Many irons spit or sputter during the first few uses with  
tap water. This happens as the steam chamber becomes  
conditioned. This will stop after a few uses.  
Adjustable Steam Switch  
This switch provides continuous steam  
in the STEAM  
position. Push the  
switch to 0 to change to dry iron.  
• During first use of the iron, it may appear to smoke. This  
will stop and does not indicate a defect or hazard.  
Auto Shutoff Reset Button/Light  
Reset  
To Dry Iron  
The light comes on when the iron is first  
plugged in even if Temperature Control  
Dial is set at Off. The light indicates that  
the iron is plugged in. After one hour,  
the iron will shut off and the light will  
blink. Push the Reset Button to turn the  
iron back on.  
Button  
1. Set Adjustable Steam Switch to 0 or empty water tank.  
2. Turn Temperature Control Dial to desired temperature.  
Allow two minutes for iron to reach desired temperature.  
Light  
To Steam Iron  
1. Unplug iron. Using a cup, slowly pour 4 ounces (12 cup) of  
Power On Light  
tap water into water tank opening. Plug iron into outlet.  
This light comes on when the iron is  
plugged in and remains on until the iron  
is unplugged. The light stays on even if  
Temperature Control Dial is turned to Off.  
2. Set Adjustable Steam Switch to STEAM.  
3. Turn Temperature Control Dial to desired fabric setting in  
steam range. Allow two minutes for the iron to reach desired  
temperature.  
Power  
Light  
Water: Please use ordinary tap water. If you have extremely  
hard water, alternate between tap water and distilled water  
for use in the iron.  
4
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
Features (not all features on all models)  
Spray and Blast of Steam Buttons  
Push spray button to release a fine spray  
of water for difficult wrinkles in cotton or  
linen. Push blast button for an extra blast  
of steam.  
Caring for Your Iron  
Iron  
1. Turn temperature control dial to Off. Unplug and let cool.  
The iron takes longer to cool down than it does to heat up.  
2. To empty water from iron, slowly tilt pointed end of iron  
down over a sink. Water will run out of water tank opening.  
3. Wrap cord loosely around iron and store iron in an upright  
position. Do not store iron laying flat on soleplate.  
Blast of  
Steam  
Spray  
Soleplate  
1. Never iron over zippers, pins, metal rivets, or snaps, as  
these may scratch the soleplate.  
Fabric/Setting Chart  
2. To clean occasional build-up on the soleplate, wipe with  
a sudsy cloth. Do not use abrasive cleansers or metal  
scouring pads.  
Ironing Instructions  
Setting  
To Iron  
Off  
3. Always store iron upright in the heel rest position.  
0
1
Dry iron on the wrong side of  
the fabric.  
Acetate, Silk  
Troubleshooting  
Acrylic, Nylon  
Dry iron using spray if necessary.  
2
3
Won’t heat.  
Polyester, Rayon  
For polyester, dry iron while the  
fabric is still damp.  
• Is the iron plugged in and the outlet working? Check the  
outlet by plugging in a lamp.  
• Is the Temperature Control Dial turned to a fabric setting?  
• If auto shutoff model, is the Automatic Shutoff Light blink-  
ing? If so, push Reset Button to reset.  
Water is leaking.  
• Do not overfill the water tank.  
• If steam ironing, is the Temperature Control Dial in the  
steam range and did the iron have enough time to preheat?  
• If dry ironing, make sure the Adjustable Steam Switch is in  
the 0, dry iron position.  
Iron using steam or spray for  
difficult wrinkles.  
Cotton Blends  
Wool  
4
5
6
7
For wool, use a press cloth and  
steam iron on the wrong side.  
Iron cottons while still damp,  
using steam and/or spray.  
Cotton  
Iron on wrong side of fabric  
while still damp.  
Linen  
6
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
Troubleshooting (continued)  
Won’t steam.  
• Check the water level.  
• Is the Adjustable Steam Switch in the STEAM position?  
• Has the iron had enough time to preheat?  
Leaves spots.  
• ALWAYS empty the water tank of the iron after using. Water  
left in the tank may discolor clothing and soleplate.  
LIMITED WARRANTY  
This product is warranted to be free from defects in material and workmanship for a  
period of one hundred eighty (180) days from the date of original purchase, except  
as noted below. During this period, we will repair or replace this product, at our option,  
at no cost. THE FOREGOING WARRANTY IS IN LIEU OF ANY OTHER WARRANTY,  
WHETHER EXPRESS OR IMPLIED, WRITTEN OR ORAL INCLUDING ANY WARRANTY  
OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. ANY LIABILITY  
IS EXPRESSLY LIMITED TO AN AMOUNT EQUAL TO THE PURCHASE PRICE PAID,  
AND ALL CLAIMS FOR SPECIAL, INCIDENTAL AND CONSEQUENTIAL DAMAGES  
ARE HEREBY EXCLUDED. There is no warranty with respect to the following, which  
may be supplied with this product: glass parts, glass containers, cutter/strainer, blades  
and/or agitators. This warranty extends only to the original consumer purchaser and  
does not cover a defect resulting from abuse, misuse, neglect, use for commercial  
purposes, or any use not in conformity with the printed directions. This warranty gives  
you specific legal rights, and you may also have other legal rights which vary from  
state to state, or province to province. Some states or provinces do not allow limita-  
tions on implied warranties or special, incidental or consequential damages, so the  
foregoing limitations may not apply to you.  
If you have a claim under this warranty, DO NOT RETURN THE APPLIANCE TO THE  
STORE! Please call our CUSTOMER SERVICE NUMBER. (For faster service please  
have model, series, and type numbers ready for operator to assist you.)  
CUSTOMER SERVICE NUMBERS  
In the U.S. 1-800-851-8900  
In Canada 1-800-267-2826  
KEEP THESE NUMBERS FOR FUTURE REFERENCE!  
HAMILTON BEACH PROCTOR-SILEX,INC.  
263 Yadkin Road, Southern Pines, NC 28387  
PROCTOR-SILEX CANADA,INC.  
Picton, Ontario K0K 2T0  
840091400  
12/01  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Peavey Speaker DTH 218 User Manual
Pentax Digital Camera IQZcom200 User Manual
Philips Speaker SA4126 User Manual
Philips Universal Remote SRU4205 User Manual
Pioneer Stereo System VSX 515 K User Manual
Planet Technology Network Router ADP 8301 User Manual
Polaris Offroad Vehicle 700 Fusion User Manual
Poulan Chainsaw 530165320 01 User Manual
Precisionaire Air Cleaner PB1410 User Manual
Precision Power MP3 Player TD450 User Manual