PROMASTER Infinity Elite ELX
15-45x65 Spotting Scope
Instructions
Congratulations on your purchase of the PROMASTER Infinity Elite ELX Spotting
Scope. With basic care and proper storage and operation, your new spotting
scope is designed to give you years of ultra high quality viewing pleasure.
Components:
A. Scope Body
B. Protective Pouch
C. SLR Camera T- Mount adapter
D. Field Carrying Pouch
Lens Cap (not pictured)
Features:
The PROMASTER Infinity Elite ELX spotting scope is a high-performance instrument employing advanced optical
technology. The precision compressed optical design minimizes size and weight while maintaining superior
optical quality and high magnification. The PROMASTER Infinity Elite ELX spotting scope uses and Extra Low
Dispersion (ED) glass objective lens to correct aberration yielding superior image clarity and resolution. The fully
broadband multi-coating on each of optical elements ensures the best image throughout the field of view. The
eyepiece lens is a standard 1 1/4 inch size generally used with astronomical telescopes and enables use of a
wide range of astronomical eyepieces (optional) for the maximum versatility when using your spotting scope.
Magnesium alloy construction ensures the most precision alignment of optical elements in a lightweight, ultra
durable body. Your PROMASTER Infinity Elite ELX spotting scope is designed for the most in-climate weather
conditions. It is o-ring sealed and nitrogen gas filled to make the unit waterproof and to prevent the scope from
fogging due to temperature variations. This enables you to use your scope in rain and inclement weather
conditions. PROMASTER’s exclusive REPELLAMAX™ element repellant coating, helps to insure that you will have
the best viewing experience possible under extreme conditions.
Installing the Field Carrying Pouch
Unzip the Field Carrying Pouch and insert the scope body. If you have difficulty inserting the scope,
remove the eyepiece by turning the eyepiece locking ring counter clockwise. After the scope body
is in the pouch, replace the eyepiece by turning it clockwise. Be sure that the eyepiece is mounted
correctly and is tight on the scope body.
Attaching to a tripod
For the best performance your spotting scope should be attached to a sturdy tripod. The better your
tripod, the more stable your viewing experience will be. A tripod and head from the PROMASTER
SystemPro Professional tripod line is an ideal choice. To mount the scope, screw the mounting
screw on the tripod head to the tripod screw hole at the bottom of the tripod platform.
Download from Www.Somanuals.com. All Manuals Search And Download.
3. Do not drop the spotting scope or subject it to strong vibration, impact or pressure.
4. Never expose the spotting scope to high temperatures (over 60°C or 140°F). Avoid leaving the spotting scope for an
extended period of time in a hot humid place such as in a car parked in the sun or near any high heat source as this
could cause the spotting scope to become deformed.
5. Do not use the spotting scope under the water. While your spotting scope is waterproof and can be submersed,
submersion to a depth greater than the specification or longer than the specification will cause permanent damage and
will void the warranty. When splashed with salt water, wipe the scope with a clean cloth moistened with fresh water.
6. Your spotting scope is waterproof and weather-resistant. After use, any moisture on your scope should be wiped away
with a dry cloth. Do not wipe your scope with thinner, alcohol, benzene nor any other chemical. In the case of dust or
water on the lens, use a blower like the PROMASTER Hurricane Blower or a lens cleaning cloth like the PROMASTER
SoftClean cloth. In the case of any oily substance like fingerprints, a small amount of high quality lens cleaning
solution like PROMASTER OpticClean fluid can be used on a high-grade lens tissue like PROMASTER OpticClean
tissue to gently remove the substance.\
7. Your spotting scope should always be stored in a clean, dry, well-ventilated environment. Never store it with mothballs
or in an environment where chemicals are handled.
USER WARNING
1. NEVER look at the sun with the spotting scope. This will cause serious damage to the retina or total loss
of eyesight.
2. Do not leave the spotting scope under direct sunlight. Sun rays passing through the scope will be greatly
intensified and a fire may occur if the rays are focused on any flammable material.
Specifications :
Type
Porro-prism angle type
Magnesium alloy body
Body construction
Magnification
15x – 45x
Objective lens
Lens coating
65mm diameter Extra Low Dispersion (ED) glass
Fully broadband multi-coated on all optical surfaces
Repellamax™ element repellant coating
57m – 27m
First objective lens coating
Field of view @ 1000m
@ 1000yds
171ft – 81ft
Exit pupil aperture
Eye Relief
4.3mm – 1.4mm
16mm – 19mm
Focus range
3m to infinity
3.3yds to infinity
Waterproof (without eyepiece)
Weatherproof
1/2m depth for 2 min
Nitrogen filled fog proof
H-24.3 x 300mm / 9.6 x 11.8inch.
1.26kg. / 2.78 lbs
Body length (Without Eyepiece
Body Weight
Accessories
Objective lens cap
Body fit vinyl pouch
SLR camera T-mount adapter
Download from Www.Somanuals.com. All Manuals Search And Download.
|