Prima Washer LPR 712 User Manual

WASHING MACHINE  
LPR 712  
Mini  
90° 90°Eco  
60°Eco  
40°Eco  
Cottons  
Spin  
Drain  
Softener  
40°  
Rinse  
Soak 30°  
Cold  
30°  
Cold  
60°  
60°Eco  
Hand- 30°  
wash  
40°  
40°  
3
0
°
4
0
°
C
o
l
d
3
0
°
Synthetics  
Delicates  
L
P
R
7
1
2
GB  
INSTRUCTION BOOKLET  
132967680  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Contents  
Maintenance and Cleaning  
Descaling  
16-17  
16  
For the User  
Important Safety Information  
Your New Washing Machine  
2
4
After each wash  
Maintenance Wash  
External cleaning  
Cleaning the dispenser drawer  
Cleaning the drawer recess  
Cleaning the filter  
The dangers of freezing  
Emergency emptying out  
16  
16  
16  
16  
Description of the Appliance  
Detergent dispenser drawer  
Child safety feature  
5
5
5
16  
16-17  
17  
The Control Panel  
6-9  
8
Programme information  
17  
Operating sequence  
9-10  
9
Something Not Working  
Service and Spare Parts  
Guarantee conditions  
18-19  
19-20  
20  
Load the laundry  
Measure out the detergent and the fabric softener  
Switch the machine on  
9
9
Select the required programme  
Select the spin speed or the “rinse hold” option  
Select the required options  
Start the programme  
At the end of the programme  
9-10  
10  
10  
10  
10  
For the Installer  
Installation Instructions  
Technical Specifications  
21  
21  
Unpacking  
Positioning  
Water inlet  
Water drainage  
Levelling  
Special conditions  
In the interest of the environment  
Electrical connection  
Building-in  
22  
22  
22-23  
23-24  
24  
Washing Hints  
Which detergent?....  
And in which form?  
11-12  
11  
11  
Wash Care Symbols  
Washing Programmes  
13  
14-15  
24  
24  
25  
26-27  
Guide to use the Instruction Book  
The following symbols will be found in the text to guide you throughout the instructions:  
Safety instructions  
Hints and tips  
Environmental information  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
Your New Washing Machine  
Your new washing machine meets all modern requirements for effective treatment of laundry  
with low water, energy and detergent consumption.  
Even small loads are washed “economically” because the amount of water used is regulated  
automatically according to the load and type of fabric.  
Automatic cooling of the wash water to 60°C  
In the interest of the  
before draining, with the 95°C programme. This  
reduces thermal shock to fabrics, helping to prevent  
creasing.  
environment  
Materials marked with the symbol  
recyclable.  
are  
The special wool programme with its new delicate  
wash system treats your woollens with extreme care.  
Check with your local Council or Environmental  
Health Office to see if there are facilities in your area  
for re-cycling this appliance.  
The balance control device ensures that the  
washing machine remains stable when spinning.  
The ECO valve allows total use of detergent and  
reduces water consumption so saving energy.  
When the appliance is to be scrapped, cut off the  
power supply cable and make the door lock device  
unusable to prevent young children from being  
trapped inside.  
Ecological hints  
To save water and energy and help protect the  
environment, we recommend that you follow these  
hints:  
Help to keep your country tidy - use authorised  
disposal sites for your old appliance.  
The symbol  
on the product or on its packaging  
Adjust the quantity of detergent according to the  
hardness of your water supply, the amount of  
laundry and the degree of soiling.  
indicates that this product may not be treated as  
household waste. Instead it shall be handed over to  
the applicable collection point for the recycling of  
electrical and electronic equipment. By ensuring this  
product is disposed of correctly, you will help  
prevent potential negative consequences for the  
environment and human health, which could  
otherwise be caused by inappropriate waste handling  
of this product. For more detailed information about  
recycling of this product, please contact your local  
city office, your household waste disposal service or  
the shop where you purchased the product.  
Select an “economy” programme for lightly soiled  
laundry.  
A programme without prewash is sufficient for  
normally soiled laundry.  
The machine works more economically if it is fully  
loaded.  
With adequate pre-treatment, stains and limited  
soiling can be removed; the laundry can then be  
washed at a lower temperature.  
How do we help to protect the environment?  
We use recycled paper!  
Important  
Your machine is fitted with a balance control device, which ensures the machine is stable during the spin.  
If the wash load appears not to have been spun sufficiently at the end of the wash cycle, because it is not evenly  
distributed in the drum, the balance control device may have operated. It will therefore be necessary to redistribute the  
wash load manually and select a spin programme. For more detailed information see the section headed "Something  
Not Working".  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
Description of the Appliance  
1 Detergent dispenser drawer  
2 Control panel  
3 Door opening handle  
4 Filter  
90° 90°Eco  
60°Eco  
40°Eco  
Cottons  
Mini  
Spin  
Drain  
Softener  
40°  
Rinse  
Soak 30°  
Cold  
30°  
Cold  
60°  
60°Eco  
Hand- 30°  
wash  
40°  
40°  
3
0
°
4
0
°
Cold 30°  
Synthetics  
Delicates  
LPR 712  
5 Adjustable feet  
Detergent dispenser drawer  
Prewash  
Main wash  
Fabric softener  
P0301  
Child safety feature  
This machine incorporates a special child safety feature  
to prevent small children from being trapped inside the  
machine.  
To activate this device, rotate the button (without  
pressing it) inside the door clockwise until the groove is  
horizontal. If necessary use a coin.  
To disable this device and restore the possibility of  
closing the door, rotate the button anti-clockwise until  
P1131  
the groove is vertical.  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
The Control Panel  
1200  
900  
700  
500  
Cottons  
90°  
Mini  
90°Eco  
60°Eco  
40°Eco  
Spin  
Drain  
Softener  
40°  
Rinse  
Soak 30°  
Cold  
Extra  
Easy  
Iron  
Start/  
Pause  
30°  
Spin  
Quick Prewash Rinse  
On/Off  
Cold  
60°  
60°Eco  
Hand-  
wash  
30°  
40°  
40°  
30°  
40°  
Cold 30°  
Synthetics  
Delicates  
LPR 712  
1
2 3  
4 5 6 7 8 9 10  
11  
1Detergent dispenser drawer  
Rinse Hol  
When Rinse Hold option is selected, the last rinse  
water is not emptied out, to prevent the fabrics from  
2 Mains-on light  
creasing. When the programme has finished, the door is  
locked, the light of the “Start/Pause” button goes off,  
the pilot lights “End” and “Rinse Hold” in the  
programme progress display are alight to indicate that  
the water must be emptied out.  
This light comes on when the “On/Off” button is  
pressed, and goes out when it is pressed again.  
3 “On/Off” button  
Press this button to switch the machine on. Press it  
again to switch the machine off.  
There are two methods of draining the water from the  
machine.  
Method 1: Drain the water only, no spin:  
Programme Option buttons  
Turn selector dial to "o" position.  
Depending on the programme, different functions can  
be combined. These must be selected after choosing the  
desired programme and before pressing the  
Start/Pause” button.  
Select the programme Drain”.  
The water will be emptied out without spinning.  
Method 2: Drain and then spin the laundry:  
Turn selector dial to oposition.  
When these buttons are pressed, the corresponding pilot  
lights come on. When they are pressed again, the pilot  
lights go out.  
If an incorrect option is selected, the corresponding  
pilot light flashes for a few seconds.  
Select programme Spin”.  
Select the required spin speed (see 4 spin speed  
button)  
Press Start/Pause button  
The water will empty out and then the laundry will be  
spun at the selected spin speed.  
4 Spin” button  
Press this button to reduce the maximum speed of the  
final speed proposed by the machine for the selected  
Attention! Before selecting programmes “Drain” or  
Spin”, the selector dial has to be positioned on o”  
(cancelling).  
programme or to select position  
“Rinse Hold” .  
The light corresponding to the selected option  
illuminates.  
5 “Quick” button  
This option can be used for lightly soiled Cotton,  
Synthetic or delicate items that have been used or  
worn for a short time.  
The following speeds are available for the different  
fabrics:  
Cottons, linen: 500/700/900 max 1200 r.p.m.  
Synthetics and Handwash (wool):  
500/700 max 900 r.p.m.  
This option is not available with the Handwash  
(Wool) programme, the Energy saving programmes  
(90° Eco, 60° Eco and 40° Eco) and Mini.  
Delicates and Mini:  
500 max 700 r.p.m.  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
6 “Prewash “button  
10 Programme progress display  
By selecting the wash programme, the pilot lights  
corresponding to the various phases making up the  
programme come on.  
After the machine has started, only the running phase  
light illuminate and stay on. (If you have selected the  
Soak 30°” programme the pilot light “Prewash”  
illuminates”). When the programme has finished, the  
End” pilot light comes on and the door can be opened.  
The machine performs a prewash cycle at 30°C max.  
The prewash cycle ends with a short spin at 650 r.p.m.  
in programmes for Cottons and Synthetics, and with  
emptying of the water for Delicates.  
This option is not available with the Handwash (wool)  
programme, Soak 30° and Mini.  
For use when washing heavily soiled laundry.  
7 “Extra Rinse” button  
Prewash  
Wash  
This option can be selected with all programmes, except  
the Handwash (wool) programme, Soak 30° and Mini.  
The machine will add 2 rinses for cotton and 1 rinse for  
synthetics and delicates.  
Rinse  
rinse hold  
Drain  
Spin  
Filter  
End  
This option is recommended for people who are allergic  
to detergents and in areas where the water is very soft.  
The “End” pilot light flashes in the event of operating  
problems.  
8 “Easy Iron” button  
Selecting this button the laundry is gently washed and  
spun to avoid any creasing. In this way ironing is easier.  
Furthermore the machine will perform 6 rinses instead  
of 3 for cotton and 4 rinses instead of 3 for synthetics.  
This function can be used only for cotton and synthetic  
fabrics.  
1 flash = the machine does not fill  
2 flashes = the machine does not empty  
4 flashes = the door has not been closed  
To eliminate the problem, see paragraph “Something not  
working”.  
If this option is selected for cotton programmes, the spin  
speed automaticaly will reduce to 900 rpm.  
If the Filter” pilot light flashes at the end of the  
programme this means that the drain filter must be  
cleaned.  
If this option is selected for synthetic programmes with  
a temperature of 60°C, the machine will perform a  
washing cycle at max 40°C.  
11 Programme selector dial  
The selector is divided into 5 sections:  
9 “Start/Pause” button  
This button has two functions: start - pause  
Start  
Cottons  
Synthetics  
Delicates  
After having selected the required programme, press this  
button to start the machine; the corresponding pilot light  
stops flashing.  
Handwashing (Wool)  
Special programmes  
• Reset programme o”  
Pause  
To interrupt a programme which is running, press the  
Start/Pause” button: the corresponding pilot light  
starts to flash.  
Cottons  
90°  
Mini  
90°Eco  
60°Eco  
40°Eco  
Spin  
Drain  
Softener  
40°  
Rinse  
Soak 30°  
Cold  
30°  
Cold  
To restart the programme from the point at which it was  
interrupted, press the Start/Pause button again.  
60°  
60°Eco  
Hand-  
wash  
30°  
40°  
40°  
30°  
40°  
Cold 30°  
Synthetics  
Delicates  
LPR 712  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
End of “Soak 30” programme  
The selector dial can be turned either clockwise or  
anticlockwise.  
Position Eco in cottons and synthetics sectors  
corresponds to the ENERGY SAVING programmes and  
position «Cold» to “cold wash”.  
At the end of the soak time, the machine stops  
automatically with water left in the tub. The light of  
the “Start/Pause” button goes off and the pilot light  
End” in the programme progress display is alight but  
the door is locked to indicate that the water must be  
emptied out.  
At the end of the programme the selector dial must  
be turned to position “o” (reset) and the “On/Off”  
button must be pressed to switch the machine off.  
Before starting a new washing phase, it is necessaty to  
empty out the water by:  
draining only. Select programme “Drain” and press  
Start/Pause button, the water is emptied out without  
spinning, or  
Functions  
draining and spin. Select programme “Spin”.  
Reduce the spin speed by means of the relevant  
button and then press Start/Pause button. The water  
is empty out and the laundry is spun at the selected  
spin speed.  
Altering an option or a running programme  
It is possible to change any option before the  
programme carries it out.  
Before you make any change, you must pause the  
washing machine by pressing the “Start/Pause” button.  
Changing a running programme is possible only by  
resetting it. Turn the programme selector dial to "o" and  
then to the new programme position. The washing water  
in the tub will not emptied out .  
At the end of the cycle, the light “End” illuminates, the  
door can be opened.  
Important!  
At the end of the «Soak 30°» programme you can select  
the washing programme. First, turn the programme  
selector dial to o(Reset), then select the programme.  
Start the new programme by pressing the “Start/Pause”  
button.  
Interrupting a programme  
Depress the “Start/Pause” button to interrupt a  
programme which is running: the corresponding light  
starts to flash.  
Programme information  
“Handwash” (wool)  
Depress the same button to restart the programme.  
Washing programme for machine washable wool as  
well as for hand washable woolens and delicate fabrics  
with the “hand washing” care symbol.  
Opening the door after the programme has  
started  
You can open the door, after having set the washing  
machine to PAUSE, provided the following conditions  
exist:  
“Soak 30°”  
This is a special programme for heavily soiled laundry.  
The machine performs a soak of about 30 minutes at  
30°C. At the end of the soak time the machine will stop  
automatically with water left in the tub. Pour the  
detergent for the soak programme into the compartment  
• the washing machine has not heated beyond 55°C;  
• the level of the water is not high;  
If these requirements are met, when you pause the  
washing machine, the door can be opened.  
marked  
.
This programme cannot be used for very delicate  
fabrics or Wool.  
Before starting a new washing phase, it is necessary to  
empty the water by selecting the “Drain” programme.  
Should it not be possible to open the door, and should it  
be absolutely necessary to do so, switch the machine off  
by pressing the “On/Off” button.  
After approximately 3 minutes, you can open the door.  
“Rinses”  
Pay attention to the level and temperatures of the  
water in the washing machine!  
With this programme it is possible to rinse and spin  
cotton garments which have been washed by hand.  
The machine performs 3 rinses, followed by a final spin  
at 1200 r.p.m. The spin speed can be reduced by pressing  
Spin” button.  
When you close the door and press the “On/Off” button  
again, the washing machine will resume the programme  
from the point where it had been interrupted.  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
“Spin”  
“Softener”  
Separate long spin at the maximum speed for hand  
washed cotton garments.  
Hand washed cotton garments can be softened with this  
programme. The machine performs 1 rinse, followed by  
a final spin at the max. speed, which can be reduced by  
pressing “Spin” button.  
“Mini”  
This is a complete programme that can be combined  
with the following options: “Spin” reduction and  
Rinse Hold”. To be used for laundry which is lightly  
soiled or which needs freshening up. Max load: 2 kg.  
Washing temperature: 30°C, programme duration: 30  
minutes, final spin speed: 700 r.p.m.  
“Drain”  
For emptying out the water of the last rinse in  
programmes with the “Rinse Hold” option or at the end  
of the Soak 30° programme.  
Turn first the programme selector dial to o, then  
select “Drain” programme and press the “Start/Pause”  
button.  
o”  
To reset a programme turn the selector dial to o.  
Now can a new programme be selected.  
Operating Sequence  
If you have selected the prewash option or the soak 30°  
programme, pour detergent into the wash compartment  
marked  
If required, pour fabric softener into the compartment  
marked (the amount used must not exceed the  
Before the first wash, we recommend that you pour 2  
litres of water into the main wash compartment  
the detergent drawer in order to activate the ECO valve.  
Then run a cotton cycle at 90°C, without any laundry in  
the machine, to remove any manufacturing residue from  
the drum and tub.  
of  
.
“MAX” mark in the drawer). Close the drawer gently.  
Pour 1/2 a measure of detergent and start the machine.  
1. Load the laundry  
Open the door by pulling the door handle outwards.  
Place the laundry in the drum, one item at a time,  
shaking them out as much as possible.  
Close the door.  
P0005  
P0006  
3. Switch the machine on  
To switch the machine on, press the “on/off” button: the  
mains-on light comes on.  
P0004  
On/Off  
2. Measure out the detergent  
and the fabric softener  
Pull out the dispenser drawer until it stops.  
Measure out the amount of detergent required and pour  
it into the main wash compartment  
.
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
4. Select the required programme  
7. Start the programme  
To start the selected programme, press the  
Start/Pause” button; the corresponding light stops  
flashing.  
Turn the programme selector dial to the desired position.  
Prewash  
Wash  
The pilot light corresponding to the wash phase which is  
running is on.  
Rinse  
rinse hold  
Drain  
The machine starts operating.  
Spin  
Filter  
End  
Start/  
Pause  
The pilot lights corresponding to the different phases  
making up the selected programme light on.  
If your laundry needs a soak time, turn the programme  
selector dial to “Soak 30°” and then, before starting a  
washing cycle, drain the water as described in the “End  
of Soak 30 programme ” paragraph.  
8. At the end of the programme  
The machine stops automatically. The light of the  
Start/Pause” button goes out, the “End” pilot light  
illuminates and the door can be opened.  
5. Select the “spin” speed or  
“rinse hold” option  
Depress the spin speed button to choose the required  
speed or “Rinse Hold” option : the corresponding light  
comes on.  
If the “Rinse Hold” option has been selected, the door  
will be locked, the light of the “Start/Pause” button  
goes off, the only “Rinse Hold” pilot light remains lit to  
indicate that the water must be drained before opening  
the door.  
1200  
900  
700  
500  
To empty out the water you can, after turning the  
programme selector dial to “o” position:  
select programme “Drain”, the water is emptied out  
Spin  
without spinning  
select programme Spin”. Select the spin speed by  
means of the relevant button and then press the  
Start/Pause” button. The water is emptied out and  
the laundry is spun at the selected spin speed.  
6. Select the required options  
The light corresponding to the pressed button  
illuminates.  
At the End of the cycle, and the End” light illuminates.  
The door can be opened.  
Turn the programme selector dial to Reset “o”.  
Switch the machine off by pressing the “On/Off”  
button.  
Remove the laundry from the drum and carefully check  
that the drum is empty so as to avoid any forgotten  
items being damaged in a subsequent wash (e.g.  
shrinking) or their colour running into a load of whites.  
Extra  
Easy  
Quick Prewash ERinse Iron  
If you do not intEnd to carry out another wash, close the  
water tap.  
Leave the door open to prevent the formation of mildew  
and unpleasant smells.  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Washing Hints  
Do NOT overload the machine. Weigh the laundry the  
Use a good quality detergent suitable for automatic  
washing machines.  
first few times you use the appliance.  
Use the correct quantities of detergent.  
The average weights of the most common items are  
listed below as a guide:  
For wool, use gentle detergent only in small  
quantities.  
1000g = 1 kg  
Bleach is very corrosive; it should be used with care  
and kept out of reach of children.  
Sheet  
700-1000 g  
100-200 g  
400-500 g  
50-100 g  
Some stains such as fruit, wine, grass, rust etc. are  
difficult to remove and should be treated before  
washing with specific products, which can be found  
in most household shops. In some cases it may help  
to soak the stain before washing with a special pre-  
soak product or biological detergent.  
Pillow case  
Tablecloth  
Serviette  
Tea towel  
70-120 g  
Linen hand towel  
Towelling hand towel  
Towelling bath towel  
Bath robe  
100-150 g  
150-250 g  
700-1000 g  
1000-1500 g  
200-300 g  
150-200 g  
Only wool marked “Pure New Wool - washable,  
preshrunk” can be washed in the machine using the  
wool programme; other types of wool should be  
washed by hand or dry cleaned.  
The wool wash cycle of this machine has been  
approved by Woolmark for the washing of machine  
washable Woolmark products provided that the  
garments are washed according to the instructions on  
the garment label and those issued by the  
Man’s shirt  
Apron  
manufacturer of this washing machine. M9605.  
Load the laundry loosely alternating large items with  
small ones.  
If you have used the machine to wash, rinse or spin  
only non-colour fast garments, there may be dye left  
in the sump. To ensure any subsequent wash is not  
contaminated with the dye, select and carry out a  
rinse and spin programme, without any garments, to  
ensure that any dye is removed from the sump.  
Sort the laundry according to the type of fabric,  
colour-fastness and how dirty it is.  
Avoid washing unhemmed or torn items as they may  
unravel.  
Once you have finished using the machine, you are  
advised to unplug it and turn off the water taps.  
Before washing, empty all pockets of small objects  
which may have been left inside (coins, keys, screws  
etc). as these could damage the drain pump.  
When washing curtains, remove the hooks.  
Close poppers and zips and fasten loose buttons.  
It is essential to wash new coloured items separately  
when washing for the first time.  
When washing fabrics requiring different wash  
temperatures together, always select the lowest  
temperature.  
White items should not be washed with coloured  
items.  
Very small items (handkerchiefs, ribbons, socks etc)  
should be washed in a washing bag or a pillow case.  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Which detergent?....  
To ensure you obtain the best wash results from your  
appliance, it is important to use the right detergent in  
your everyday wash, and only detergents recommended  
for use in automatic machines.  
And in which form?  
Not only are there different types of detergent, but they  
are also available in different forms. Whether you chose  
a powder or liquid in traditional or compact form is  
your own personal choice.  
To maintain the appearance of your clothes and  
household textiles and to make them last longer you  
should use different types of detergent for different  
washes, whether for whites, colours or delicates.  
TRADITIONAL POWDERS  
Pour the powder directly into the dispenser drawer. Do  
not sprinkle powder onto clothes in the machine drum.  
TRADITIONAL LIQUIDS  
Liquid can be placed in the main wash compartment of  
the detergent drawer marked with the symbol  
the machine immediately upon placing the  
detergent in the dispenser drawer.  
WHITES  
We recommend the Ariel product  
range which is biological and  
designed to provide excellent  
cleaning and stain removal even  
at low temperatures.  
, start  
Alternatively the detergent is measured into the  
specially designed dosing device* which should be  
placed on top of the laundry, and at the back of the  
machine drum.  
NON BIOLOGICAL  
If you prefer to use a non  
biological detergent, which does  
not contain enzymes we  
recommend Fairy. Fairy provides  
good cleaning and stain removal.  
COMPACT POWDERS AND LIQUIDS  
Compact detergents (or concentrates as they are also  
known) are available in liquid or powder form, and  
generally require a smaller dosage. Follow the  
manufacturer’s instructions to ensure the most  
economical usage. Pour the detergent directly into the  
dispenser drawer, or alternatively measure the detergent  
into the specially designed dosing device* which  
should be placed on top of the laundry, and at the back  
of the machine drum.  
COLOURS  
For coloured items you should use a detergent which is  
designed to clean while maintaining the original colour.  
Ariel Color does not contain bleach  
and therefore helps to preserve  
* If you use a dosing device in a washer dryer,  
please ensure the dosing device/ball is removed  
before carrying out a drying programme.  
colours.  
DELICATE ITEMS  
When washing delicates such as  
woollens, you should use a product which is specially  
designed to care for fine fabrics.  
Dreft Automatic is suitable for  
woollens and other delicates.  
FABRIC CONDITIONERS  
These are ideal for improving ‘softness’, and also  
reduce static cling on synthetics and make ironing  
easier. They are available in two types:  
For example Lenor liquid fabric  
softener, for use in the washing  
machine/washer dryer. The  
liquid fabric softener should be  
poured into the compartment  
LAUNDRY BLEACH  
For additional stain removal you may wish to use a  
product such as Ace Gentle Bleach which is used in  
addition to your chosen detergent. Ace is suitable for all  
washable fabrics including silks,  
marked with the symbol  
Follow the  
.
woollens and colours.  
manufacturer’s dosage  
instructions and never exceed the  
MAX level.  
Bounce conditioning sheets for use  
in a tumble dryer. We recommend  
the conditioning sheets are pinned  
(using a safety pin) to an article  
of laundry and placed in the  
tumble dryer.  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Wash Care Symbols  
Wash care labels inside garments recommend how to launder your clothes with the best results. The care labelling  
code is in line with care labelling used in the rest of Europe. The symbols used make it easy to select the correct  
programme on your washing machine.  
WASHING SYMBOL  
WASH ACTION  
Normal (Maximum)  
Normal (Maximum)  
FABRIC  
White Cotton or Linen  
without Special Finishes  
95  
Cotton, Linen or Viscose  
without Special Finishes  
Colourfast at 60°C.  
60  
50  
Nylon, Polyester/Cotton, Viscose  
with Special Finishes, Cotton/  
Acrylic Mix.  
Reduced (Medium)  
Normal (Maximum)  
Reduced (Medium)  
Cotton, Linen or Viscose  
Colourfast at 40°C but not 60°C.  
40  
40  
Acrylics, Acetate, Triacetate, Wool  
mixes, Polyester/wool blends.  
Wool, wool mixtures, Silks  
Do not machine wash  
40  
Much Reduced (Minimum)  
Hand wash only  
BLEACHING  
Chlorine bleach may be used  
IRONING  
Cotten, Linen, Viscose  
Polyester mixtures, Wool  
Acrylic, Nylon, Polyester  
Hot iron  
Warm iron  
Cool iron  
DRY CLEANING  
May be dry cleaned. Other letters and/or a bar beneath the circle will  
indicate the required process to the dry cleaner.  
TUMBLE DRYING  
with high heat setting  
with low heat setting  
May be tumble dried  
A cross through any symbol means «DO NOT»  
X
Important Notes  
For best results, always use the dispenser drawer for  
dispensing detergents and liquid additives.  
Once the dispenser has been filled, close it by pushing it  
in gently. This is particularly important if you are using  
fabric conditioner to avoid the conditioner entering the  
machine prematurely.  
When using liquid detergent and a prewash programme,  
place the detergent into the correct compartment in the  
dispenser drawer, after the prewash has finished.  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Washing Programmes  
Consumption**  
Type of  
fabric  
Programme  
description  
Additional  
functions  
Max.  
load  
Section  
Cottons  
Temp.  
90°  
Energy  
Water  
lt  
Time  
min  
kWh  
SPIN SPEED/ R. HOLD 5 kg  
PREWASH, QUICK,  
EXTRA RINSE  
2.0  
53  
145  
Whites  
Wash at 95°C  
3 rinses  
Normal spin  
EASY IRON  
Wash at 67°C  
3 rinses  
Cottons 90 Eco°  
*Cottons 60°Eco  
SPIN SPEED/ R. HOLD  
PREWASH,  
Whites  
5 kg  
5 kg  
1.4  
49  
49  
135  
135  
Economy  
EXTRA RINSE,  
EASY IRON  
Normal spin  
0.85  
Wash at 60°C  
3 rinses  
Normal spin  
Whites and  
Fast colours  
SPIN SPEED/ R. HOLD  
PREWASH,  
EXTRA RINSE  
EASY IRON  
Colours  
Wash at 40°C  
3 rinses  
5 kg  
5 kg  
0.9  
49  
49  
150  
115  
Economy  
SPIN SPEED/ R. HOLD  
PREWASH,  
Cottons 40° Eco  
EXTRA RINSE,  
EASY IRON  
Normal spin  
Non-fast  
colours  
Cottons  
30°-40°  
Wash at 30°-40°  
or cold wash  
3 rinses  
0.55  
SPIN SPEED/ R. HOLD  
PREWASH, QUICK,  
EXTRA RINSE  
(Cold)  
EASY IRON  
Normal spin  
Synthetics  
60°  
Synthetics  
Wash at 60°C  
3 rinses  
Delicate spin  
SPIN SPEED/ R. HOLD 2 kg  
PREWASH, QUICK,  
EXTRA RINSE  
0.85  
52  
90  
EASY IRON  
Synthetics  
SPIN SPEED/ R. HOLD  
Synthetics  
60° Eco  
2 kg  
0.35  
0.4  
52  
49  
90  
75  
Wash at 40°C  
3 rinses  
Economy  
PREWASH, EXTRA R.  
EASY IRON  
Delicate spin  
Synthetics  
Delicates  
2 kg  
Wash at 30°-40°C  
or cold wash  
3 rinses  
30°-40°  
SPIN SPEED/ R. HOLD  
Synthetics  
Delicates  
PREWASH, QUICK,  
EXTRA RINSE  
EASY IRON  
(Cold)  
Delicate spin  
SPIN SPEED/ R. HOLD  
PREWASH, QUICK,  
EXTRA RINSE  
Wash at 30°-40°C  
3 rinses  
Delicate spin  
30°- 40°  
2 kg  
0.5  
52  
53  
60  
55  
Wool  
(Handwash)  
Handwash  
Wool  
30°- 40°  
SPIN SPEED/ R. HOLD 1 k g  
0.35  
Wash at 30°-40°C  
or cold wash  
3 rinses  
(Cold)  
Delicate spin  
* The “Cotton Whites and fast colours Economy” programme at 60° Eco C is the reference programme for the  
data entered in the energy label, in compliance with EC 92/75 standards.  
** This data is given purely as an indication: the consumption values may vary in relation to the quantity and type of  
laundry, the temperature of the water supply and the ambient temperature. The data refers to the highest  
temperature for each programme.  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Special Programmes  
Consumption*  
Additional  
functions  
Max.  
load  
Programme  
Programme description  
Time  
min  
Energy  
kWh  
Water  
lt  
30  
Soak 30°  
Soak at 30°C for about 30  
minutes. Stop with water in  
the tub.  
5 kg  
0.30  
17  
45  
3 rinses with liquid additive  
if required  
Long spin  
SPIN SPEED/  
RINSE HOLD  
EXTRA RINSE  
EASY IRON  
5 kg  
0.08  
45  
Rinses  
SPIN SPEED/  
RINSE HOLD  
5 kg  
-
17  
-
21  
2
1 rinse with softener  
Short spin  
Softener  
Drain  
-
-
For emptying out after the  
programme Soak 30° or at  
the end of a programme  
with “Rinse Hold” option  
-
-
Spin  
SPIN SPEED  
5 kg  
2 kg  
10  
30  
Separate long spin at 1100  
rpm max  
0.28  
38  
Mini  
SPIN SPEED/  
RINSE HOLD  
Wash at 30°C  
2 rinses  
Short spin at 700 r.p.m.  
-
-
O
For cancelling the wash  
programme which is  
running  
-
This data is given purely as an indication: the consumption values may vary in relation to the quantity and type of  
laundry, the temperature of the water supply and the ambient temperature.  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Maintenance and Cleaning  
Before any maintenance or cleaning is carried out you  
must DISCONNECT the appliance from the electricity  
supply.  
Descaling  
The water we use normally contains lime. It is a good  
idea to periodically use a water softening powder in the  
machine. Do this separately from any laundry washing,  
P0009  
P0010  
and according to the softening powder manufacturer's  
instructions. This will help to prevent the formation of  
lime deposits.  
After each wash  
Leave the door open for a while. This helps to prevent  
mould and stagnant smells forming inside the appliance.  
Keeping the door open after a wash will also help to  
P1086  
preserve the door seal.  
Cleaning the drawer recess  
Maintenance Wash  
Having removed the drawer, use a small brush to clean  
the recess, ensuring that all washing powder residue is  
removed from the upper and lower part of the recess.  
Replace the drawer and run the rinse programme  
without any clothes in the drum.  
With the use of low temperature washes it is possible to  
get a build up of residues inside the drum.  
We recommend that a maintenance wash be performed  
on a regular basis.  
To run a maintenance wash:  
The drum should be empty of laundry.  
Select the hottest cotton wash programme.  
Use a normal measure of detergent, must be a  
powder (such as Ariel Futur).  
External cleaning  
P0038  
Clean the exterior cabinet of the appliance with soap  
and water only, and then dry thoroughly.  
Cleaning the filter  
The water drain filter  
Cleaning the dispenser drawer  
The washing powder and additive dispenser drawer  
should be cleaned regularly.  
Remove the drawer by pressing the catch downwards  
and by pulling it out. Flush it out under a tap, to remove  
any traces of accumulated powder.  
To aid cleaning, the top part of the additive  
compartment should be removed.  
A clean filter is important for the correct functioning of  
the machine, and should therefore be cleaned after every  
washing programme.  
Place a container under the filter to catch any spillage. If  
the filter is blocked and the machine is unable to drain  
you will need to drain the water manually from the  
machine at this stage. To do this, unhook the drain hose  
from the standpipe or sink and hold the end of the hose  
over a bowl on the floor. The water should drain by  
gravity into the bowl. When the bowl is full, hook the  
hose back up and empty the bowl. Repeat the procedure  
until water stops flowing out.  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Unscrew and remove the filter.  
The dangers of freezing  
If the machine is exposed to temperatures below 0°C,  
certain precautions should be taken.  
Turn off the water tap.  
Unscrew the inlet hose.  
Unhook the drain hose from the rear support and  
position the end of this hose and that of the inlet  
hose in a bowl. Run the draining programme.  
P0037  
P0039  
Disconnect the appliance.  
Screw the inlet hose and reposition the drain hose.  
Clean carefully under a fast running tap.  
When you intend to start the machine up again,  
make sure that the room temperature is above 0°C.  
Important!  
Every time you drain the water through the emergency  
emptying hose you must pour 2 litres of water into the  
main wash compartment of the detergent drawer and  
then run “Drain” programme. This will activate the  
ECO valve and avoid the detergent remains being  
wasted.  
P0040  
Warning  
Emergency emptying out  
When the appliance is in use and depending on the  
programme selected there can be hot water in the filter.  
Never remove the filter during a wash cycle, always  
wait until the appliance has finished the cycle, and is  
empty. When replacing the filter, ensure it is securely  
retightened so as to stop leaks and young children being  
able to remove it.  
If the water is not discharged, proceed as follows to  
empty out the machine:  
pull out the plug from the power socket;  
close the water tap;  
if necessary, wait until the water has cooled down;  
Unscrew and remove the filter;  
place a bowl on the floor. The water should drain by  
The water inlet filter  
gravity into the bowl. When the bowl is full, empty  
the bowl. Repeat the procedure until water stops  
flowing out;  
If your water is very hard or contains traces of lime  
deposit, the water inlet filter may become clogged.  
It is therefore a good idea to clean it from time to time.  
Turn off the water tap. Unscrew the water inlet hose.  
Clean the filter using a hard bristle brush.  
clean the filter if necessary as previously described;  
screw the filter again.  
Tighten up the inlet hose.  
P1090  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Something Not Working  
Certain problems are due to lack of simple maintenance or oversights, which can be solved easily without calling out an  
engineer. Before contacting your local Service Force Centre, please carry out the checks listed below.  
IMPORTANT: if you call out an engineer to a fault listed below, or to repair a fault caused by incorrect use or  
installation, a charge will be made even if the appliance is under guarantee.  
During machine operation it is possible that the “End” light starts to flash:  
1 flash = the machine does not fill  
2 flashes = the machine does not empty  
4 flashes = the door has not been closed  
Once the problem has been eliminated, press the “Start/Pause” button to restart the programme. If after all checks, the  
problem persists, contact your local Service Force Centre.  
Symptom  
Possible causes  
The machine does not start  
The door has not been closed.  
The plug is not properly inserted in the power socket.  
There is no current at the socket  
The main fuse or the fuse in the plug has blown.  
The selector dial is not correctly positioned.  
The Start/Pause button has not been pressed.  
The machine does not fill  
Ensure the water tap is open.  
The filter in the inlet hose is blocked..  
The inlet hose may be squashed or kinked.  
The door has not been closed.  
The machine fills then empties  
immediately  
The end of the drain hose is too low.  
The end of the drain hose is submerged in water.  
There is no vent in the end of the drain hose.  
The drain hose may be squashed or kinked.  
The Rinse Hold option or the Soak 30 programme has been selected.  
The drain filter may be blocked.  
The drain hose extension is not correct. Follow the instructions for  
The machine does not empty and/or  
does not spin  
connecting to the waste.  
The drainage system pipes are blocked.  
The wash load is unbalanced: redistribute the clothes inside the drum to  
allow the machine to spin.  
There is water on the floor  
Too much detergent or unsuitable detergent has been used (creates too  
much foam).  
Check whether there are any leaks from one of the inlet hose fittings. It  
is not always easy to see this as the water runs down the hose; check to  
see if it is damp.  
The drain hose may be damaged or not securely positioned.  
The detergent dispenser drawer or recess is clogged.  
The drainage system pipes are blocked.  
Too little detergent or unsuitable detergent has been used. An  
Unsatisfactory washing results  
insufficient amount of detergent leaves the laundry looking grey and  
causes lime scale to form.  
Stubborn stains have not been treated prior to washing  
The correct wash programme has not been selected.  
Too much laundry has been placed in the drum.  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Symptom  
Possible causes  
The machine vibrates when spinning  
The internal packing has not been removed.  
The machine is in contact with the wall or furniture.  
The machine is not level.  
The washing load is badly distributed in the drum.  
Maybe there is very little laundry in the drum.  
The door will not open  
The water level is above the bottom edge of the door.  
The machine is heating the water.  
The drum is turning.  
Spinning starts late or the machine  
does not spin  
The electronic unbalance detection device has cut in because the  
laundry is not evenly distributed in the drum. The laundry is  
redistributed by reverse rotation of the drum. This may happen several  
times before the unbalance disappears and normal spinning can resume.  
If, after 10 minutes, the laundry is still not evenly distributed in the  
drum, the machine will not spin. In this case, redistribute the load  
manually and select the spin programme.  
The machine makes an unusual  
noise  
The machine is fitted with a type of motor which makes an unusual  
noise compared with other traditional motors. This new motor ensures  
a softer start and more even distribution of the laundry in the drum  
when spinning, as well as increased stability of the machine.  
No water is visible in the drum  
Machines based on modern technology operate very economically  
using very little water without affecting performance.  
Service & Spare Parts  
In the event of your appliance requiring service, or if  
you wish to purchase spare parts, please contact your  
local Service Force Centre by telephoning:  
P
r o  
M
d
o
.
N
d
.
.
.
.
.
.
.
.
.
.
.
o
. . . . . . . . . . .  
.
S
e r  
.
N o  
.
. . . . . . . . .  
0870 5 929929  
Mod. ..........  
Prod. No. ...........  
Ser. No. .........  
P0042 BD  
For the address of your local Service Force Centre and  
further information about Service Force, please visit the  
Customer Care Department  
Before calling out an engineer, please ensure you have  
read the details under the heading “Something Not  
Working”.  
For general enquiries concerning your appliance or for  
further information, please contact our Customer Care  
Department by letter or telephone at the address below  
Customer Care Department - EHP  
When you contact the Service Force Centre you will  
need to give the following details:  
Major Appliances  
Addington Way, Luton - -Bedfordshire  
LU4 9QQ  
1. Your name, address and post code  
2. Your telephone number  
Tel 08705 950 950*  
3. Clear and concise details of fault  
4. The model and serial number of the appliance (found  
on the rating plate - see picture)  
* calls to this number may be recorded for training  
purposes.  
5. The purchase date.  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Please note that a valid purchase receipt or  
guarantee documentation is required for in-  
guarantee service calls.  
Guarantee Conditions  
Appliances found to be in use within a commercial  
environment, plus those which are subject to rental  
agreements.  
Standard guarantee conditions  
We undertake that if, within 12 months of the date of the  
purchase, this Prima appliance or any part thereof is  
proved to be defective by reason only of faulty  
workmanship or materials, we will, at our option, repair  
or replace the same FREE OF ANY CHARGE for  
labour, materials or carriage on condition that:  
European guarantee  
If you should move to another country within Europe  
then your guarantee moves with you to your new home  
subject to the following qualifications:  
The appliance has been correctly installed and used  
only on the electricity supply stated on the rating  
plate.  
The guarantee starts from the date you first  
purchased your product.  
The guarantee is for the same period and to the same  
extent for labour and parts as exists in the new  
country of use for this brand or range of products.  
The appliance has been used for normal domestic  
purposes only, and in accordance with the  
manufacturer’s instructions.  
The guarantee relates to you and cannot be  
transferred to another user.  
The appliance has not been serviced, maintained,  
repaired, taken apart or tampered with, by any  
person not authorised by us.  
Your new home is within the European Community  
(EC) or European Free Trade Area.  
All service work under this guarantee must be  
undertaken by a Service Force Centre.  
The product is installed and used in accordance with  
our instructions and is only used domestically, i.e. a  
normal household.  
Any appliance or defective part replaced shall become  
the Company’s property.  
The product is installed taking into account  
regulations in your new country.  
This guarantee is in addition to your statutory and other  
legal rights.  
Home visits are made between 8.30am and 5.30pm  
Monday to Friday. Visits may be available outside these  
hours in which case a premium will be charged.  
Before you move please contact your nearest Customer  
Care Centre, listed below, to give them details of your  
new home. They will then ensure that the local Service  
Organisation is aware of your move and able to look  
after you and your appliances.  
Exclusions  
This guarantee does not cover:  
France  
Germany  
Italy  
Senlis  
+33 (0)344 62 20 13  
+49 (0)800 234 7378  
+39 (0)800 11 75 11  
Nurnberg  
Pordenone  
Damage or calls resulting from transportation,  
improper use or neglect, the replacement of any light  
bulbs or removable parts of glass or plastic.  
Sweden  
UK  
Stockholm  
Luton  
+46 (0)20 78 77 50  
+44 (0)8705 950 950  
+353 (0)1 40907528  
Costs incurred for calls to put right an appliance  
Ireland  
Dublin  
which is improperly installed or calls to appliances  
outside the United Kingdom.  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installation Instructions  
It is dangerous to alter the specifications or  
attempt to modify this product in any way.  
Care must be taken to ensure that the appliance  
does not stand on the electrical supply cable.  
Any electrical work required to install this  
appliance should be carried out by a qualified  
electrician or competent person.  
Any plumbing work required to install this  
appliance should be carried out by a qualified  
plumber or competent person.  
Technical Specifications  
DIMENSIONS  
Height  
Width  
Depth  
82 cm  
60 cm  
54 cm  
POWER SUPPLY VOLTAGE  
TOTAL POWER ABSORBED  
230-240 V/50 Hz  
2050 W (10A)  
WATER PRESSURE  
Minimum  
Maximum  
0.05 MPa  
0.80 MPa  
MAXIMUM RECOMMENDED LOAD  
Cotton, linen  
Synthetics  
Delicate fabrics  
Handwash (Wool)  
5 kg  
2 kg  
2 kg  
1 kg  
SPIN SPEED  
Maximum  
1200 rpm  
CONSUMPTION DATA FOR WASHING  
5 KG of NORMALLY SOILED COTTON  
ITEMS WITH THE ECONOMY  
PROGRAMME 60° Eco  
Energy  
Water  
Time  
0.85 kWh  
49 litres  
130 mins  
This appliance complies with the following E.E.C. Directives:  
- 73/23 EEC of 19.2.73 (Low Voltage Directive) and subsequent modifications;  
- 89/336 EEC of 3.5.89 (Electromagnetic Compatibility Directive) and subsequent modifications.  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Set the machine upright and remove the two remaining  
bolts from the back.  
Unpacking  
Pull out the three plastic spacers from the holes into  
which the bolts were fitted.  
Plug the open holes with the plugs supplied with the  
instruction booklet.  
All transit bolts and packing must be removed  
before using the appliance.  
You are advised to keep all the packaging for re-use in  
case the machine is to be transported again.  
Using a spanner unscrew and remove the rear right bolt.  
Lay the machine gently on its back, making sure that the  
hoses are not squashed.  
P0020  
P0256  
Positioning  
Install the machine on a flat hard floor.  
P0255  
Make sure that air circulation around the machine is not  
impeded by carpets, rugs etc. Check that the machine  
does not touch the wall or other kitchen units.  
Never place cardboard, wood or similar materials under  
the machine to compensate for any unevenness in the  
floor.  
Remove the polystyrene base and take off the bottom  
panel by unscrewing the central screw. Carefully slide  
out the right polythene bag.  
Your new washing machine has been designed to be  
permanently plumbed in to your home’s water supply  
and drainage system. However, if this is not possible, it  
may be connected to a suitable existing tap with the  
drain hose discharging into a sink.  
The appliance has an inlet hose, with female 3/4” BSP  
thread connector. If this connection is not compatible  
with the plumbing of the existing installation, a variety  
of connectors are available from good hardware stores  
and plumbers merchants to suit most domestic  
plumbing. Any alteration to your existing plumbing  
must be carried out by a competent person, or qualified  
plumber.  
P0457  
P0015  
Repeat the operation for the left and central polythene  
bags.  
Re-fit the bottom panel using the 4 screws supplied with  
the door hinges (in the plastic bag) and the previously  
removed screw.  
Water inlet  
Connect the hose to a tap with a 3/4’’ thread.  
Do not use previously employed hoses.  
Installation should comply with local water authority  
and building regulations’ requirements.  
P0453  
P0016  
The appliance must be connected to a cold water  
supply.  
A minimum water pressure of 0.05 MPa (0.5 bar) is  
required for safe operation of the appliance.  
22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
If you cannot make the cold water connection direct  
from the rising mains, you may be able to operate the  
appliance from your cold water storage system.  
When discharging into a standpipe ensure that the top of  
the standpipe is no more than 90cm (35.4'') and no less  
than 60cm (23.6'') above floor level.  
3 pin  
There should be a minimum distance of 5.02m  
(16.5 ft) between the appliance’s inlet and the bottom of  
the water storage tank.  
Set the hoses correctly by loosening the ring nuts. After  
positioning the inlet hoses, be sure to tighten the ring  
nuts again to prevent leaks.  
P1201  
The drain hose may be extended to a maximum of 4  
metres. An additional drain hose and joining piece is  
available from your local Service Force Centre.  
The joining piece must have an internal diameter of  
18mm.  
P1088  
P0021  
If your drain hose looks like this (see below) you do not  
require the “U” piece”. Just push the hose firmly into  
the standpipe.  
Water drainage  
This appliance is designed to be permanently plumbed  
into your home's drainage system using one of the  
following methods.  
1. Into a drainage standpipe.  
Firstly form a hook in the end of the drain hose using  
the “U” piece” supplied.  
P1212  
2. Onto a sink outlet spigot.  
U” piece  
supplied  
If the outlet spigot has not been used before, remove  
any blanking plug that may be in place.  
P1199  
Place the drain hose into your standpipe, which should  
have an internal diameter of approximately 38mm thus  
ensuring there is an air break between the drain hose  
and standpipe.  
38 mm (11.2”)  
standpipe  
diameter  
P1197  
Push the drain hose onto the spigot and secure with a  
clip if required, ensure a loop is formed in the drain  
hose (see diagram) to prevent waste from the sink  
entering the washing machine.  
P1200  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Special conditions  
If the floor is carpeted or covered with crumbly or soft  
material, insert a rigid support base under the feet to  
prevent noise, vibration or displacement. The base  
should protrude a few centimetres beyond the edges of  
the machine.  
Loop  
P1198  
Warning  
The machine should NOT be placed on deep pile  
carpeting.  
Important  
Before connecting the machine to new pipework or  
to pipework that has not been used for some time,  
run off a reasonable amount of water to flush out any  
debris that may have collected in the pipes.  
Note  
Please ensure that when the appliance is installed it is  
easily accessible for the engineer in the event of a  
breakdown.  
For a correct functioning of the machine the drain  
hose must be hooked on the proper support piece  
situated on the top of the back side of the appliance.  
In the interest of the environment  
Levelling  
Washing machines and dishwashers should be  
connected to the FOUL drainage system, the water will  
then be taken to a sewage works for treatment before  
being discharged safely into a river.  
Level the washing machine by raising or lowering the  
feet. The feet may be tight to adjust as they incorporate  
a self locking nut, but the machine MUST be level and  
stable (check diagonally).  
It is essential that these appliances are not connected to  
the surface water drainage system as this water is  
discharged directly into a river or stream and may cause  
pollution.  
If you require any further advice please contact your  
local water authority.  
P1051  
Any necessary adjustment can be made with a spanner.  
Accurate levelling prevents vibration, noise and  
displacement of the machine during operation.  
SHOWER  
SINK TOILET  
BATH  
BIDET  
Some vibration is inevitable, especially if mounted on a  
wooden floor.  
Sprung wooden floors are particularly susceptible to  
vibration. For advice, consult a builder. If possible,  
always place the machine on a solid floor.  
WASHING  
MACHINE  
DISHWASHER  
RAINWATER  
'RUN-OFF'  
FOUL DRAIN  
SURFACE WATER  
DRAINS & SEWERS  
FOUL SEWERS  
SEWAGE  
TREATMENT  
WORKS  
UNTREATED  
DISCHARGE  
TREATED  
DISCHARGE  
RIVER  
RIVER  
P0987  
24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
The wire coloured green and yellow must be connected  
to the terminal marked with the letter «E» or by the  
Electrical connection  
Any electrical work required to install this appliance  
should be carried out by a qualified electrician or  
competent person.  
earth symbol  
or coloured green and yellow.  
The wire coloured blue must be connected to the  
terminal «N» or coloured black.  
WARNING: THIS APPLIANCE MUST BE  
EARTHED.  
The wire coloured brown must be connected to the  
terminal marked «L» or coloured red.  
Upon completion there must be no cut, or stray strands  
of wire present and the cord clamp must be secure over  
the outer sheath.  
The manufacturer declines any liability should  
this safety measure not be observed.  
Before switching on, make sure the electricity supply  
voltage is the same as that indicated on the appliance’s  
rating plate. The rating plate is located at the top of the  
rim of the open door.  
WARNING:  
A cut off plug inserted into a 13 amp socket is  
a serious safety (shock) hazard.  
Ensure that the cut off plug is disposed of  
safely. Should the appliance power supply  
cable neeed to be replaced, this MUST be  
carried out by our Service Force Centre.  
P
r o  
M
d
N
o
d
.
.
. . . . . . . . . .  
o
. . . . . . . . . . .  
.
S e  
r
.
N
o
. . . . . . . . .  
Note  
.
When the appliance is installed the power supply cable  
must be accessible.  
Mod. ..........  
Prod. No. ...........  
Ser. No. .........  
P0042 BD  
Permanent connection  
The appliance is supplied with a 13amp plug fitted.  
In the event of having to change the fuse in the plug  
supplied, a 13amp ASTA approved (BS1363/A) fuse  
must be used.  
Should the plug need to be replaced for any reason,  
proceed as described below.  
In the case of permanent connection it is necessary that  
you install a double pole switch between the appliance  
and the electricity supply (mains), with a minimum gap  
of 3mm between the switch contacts and of a type  
suitable for the required load in compliance with the  
current electrical regulations.  
The wires in the mains lead are coloured in accordance  
with the following code:  
The switch must not break the yellow and green earth  
cable at any point.  
Green and Yellow  
Blue  
- Earth  
- Neutral  
- Live  
Brown  
GREEN & YELLOW  
E
L
N
BROWN  
BLUE  
CORD CLAMP  
P1041  
25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
a) Door  
Building-in  
The dimensions of the door should be:  
- width  
- thickness 16-22 mm  
The height (C-Fig. C) depends on the height of the  
adjacent furniture's base.  
This appliance has been designed to be built into the  
595-598 mm  
kitchen furniture.  
The recess should have the dimensions shown in picture  
A.  
00  
6
35 Ø 12.5-14 depth  
6
00  
16-22  
min.  
596  
5
70  
1
5
5
1
54  
8
22+1,5  
0
9
0
49  
595-598  
A
P0965  
C
P0422S  
When installing the appliance into the kitchen furniture  
ensure, if possible, the hoses are placed in either of the  
two recesses on the back of the appliance. This will help  
to prevent the hoses from becoming kinked or trapped.  
Picture AB.  
b) Hinges  
To mount the hinges it is necessary to drill two holes  
(dia. 35 mm, depth 12.5-14 mm depending on the depth  
of door furniture) on the inner side of the door. The  
distance between the holes hobs fixing centres must be  
416 mm.  
The distance (B) from upper edge of the door to the  
centre of the hole depends on the adjacent furniture's  
dimensions.  
The required dimensions are given in the picture C.  
The hinges will be fixed to the door by means of screws  
for wood (2-Fig. B) supplied with the appliance.  
c) Mounting the door  
Fix the hinges (1) to the machine by means of the  
M5x15 screws (3-Fig. B). The hinges can be adjusted to  
compensate for possible uneven thickness of the door.  
To align the door perfectly it is necessary to loosen the  
screw (3-Fig. B), adjust the door and tighten the screw  
again.  
Preparation and assembly of the door  
The machine is originally pre-arranged for the assembly  
of a door opening from right to left.  
In this case it is sufficient to screw in the hinges (1) and  
the counter-magnet (6) provided with the appliance, at  
the right level (Fig. B).  
d) Counter-magnet (6)  
The appliance is pre-arranged for a magnetic closure of  
the door. To enable a correct operation of this device, it  
is necessary to screw the counter-magnet (6) (steel disk  
+ rubber ring) into the inner side of the door.  
Its position must correspond to the magnet (4) on the  
appliance (see picture D).  
6
4
1
7
5
3
2
B
P0982  
26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Drill four fixing holes see Fig. G  
600-605 mm  
6
4
490 mm  
95 mm  
Front edge  
D
50 mm  
P0984  
Top view  
G
If the door has to be opened from left to right, invert the  
position of the plates (7), the magnet (4) and the plate  
(5) (Fig. B and E). Mount the countermagnet (6) and the  
hinges (1) as previously described.  
Position the base into the recess with its front edge as  
far forward as the adjoining plinth line will allow.  
The reason for placing the base in this position is to  
allow a small strip of beading to be fitted in front of  
the appliance feet.  
E
6
4
Fix the base firmly to the floor using four appropriate  
countersunk screws (see Fig. H).  
1
5
7
3
2
P0983  
Hardwood strip  
5 mm x 25 mm  
5 X 25 X 605  
490  
Recommendations regarding the  
construction and fitting of a base  
when the installation requires an  
integrated appliance to be raised  
Where the appliance has been raised by mounting onto  
a wooden base provided by the installer. The material  
used to construct the base should have a non slip  
surface, be water repellent and if possible be one solid  
piece.  
600-605  
H
With the appliance installed adjust all four feet ensuring  
the machine is stable, and a clearance of approximately  
5 mm is left between the top of the machine and the  
underside of the worktop.  
A final check for stability should be carried out with the  
machine on spin with a load, this will identify the need  
for any further fine adjustment to the feet.  
If it is not possible to use one solid piece, due to the  
additional height required, ensure that any additional  
strips of timber are glued and screwed to the underside  
of the base (see Fig. F).  
A strip of beading approximately 605 mm W, x 5 mm  
H, x 25 mm D must be screwed down into the base  
directly in front of the machine’s feet, this will provide  
additional security.  
5 mm Hardwood strip  
Additional pieces of  
timber should run  
If required an additional door magnet, part number  
1242394-00/3 and disc, part number 1242393-00/5 are  
available from spare parts.  
40 mm  
from front to back  
100 mm  
600-605 mm  
Front view  
F
27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
plc 2007  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Peavey Music Mixer UMA 35 User Manual
Pelco Security Camera C3453M B User Manual
Philips CRT Television Television Set Remote Control User Manual
Philips Network Card SPE9020CC User Manual
Polaroid Digital Camera CAA 03040S User Manual
Polycom Telephone 550D User Manual
Polycom Telephone 1725 36092 001 User Manual
Polycom Webcam 3725 26798 002 User Manual
Premier Mounts Indoor Furnishings APP 2446 User Manual
ProForm Treadmill PFTL912050 User Manual