Introduction
Thank you for purchasing this television set. Every effort has been made
to simplify the operation and tuning of the receiver by the use of menus.
These menus are displayed on screen when requested giving easy access
to the various adjustments.
This handbook has been designed to help you install and operate your TV set.
We would strongly advice you read it thoroughly.
Table of contents
Installation
TV set and remote control ......................................................................................2
Switching on.................................................................................................................2
The keys on the remote control.............................................................................3
The keys on the TV set .............................................................................................3
Menu installation: selecting menu language and country...................................4
Tuning-in TV channels: automatic store .................................................................5
Sort ................................................................................................................................5
Manual store ................................................................................................................6
Favourite programmes and naming programmes................................................7
Operation
Operating the remote control ................................................................................8
Other functions...........................................................................................................9
Using the menu: adjusting the picture and sound.............................................10
Child lock, storing adjustments.............................................................................11
Programming, message............................................................................................12
Teletext.......................................................................................................................13
Peripherals
Connecting peripheral equipment........................................................................15
Tips..............................................................................................................................17
Glossary .....................................................................................................................18
Index ...........................................................................................................................18
1
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote control keys
EXT sockets selection (p. 9)
Screen information (p. 9)
Teletext functions (p . 12)
enlarging a page
INSTALLATION Menu (p
Press the and keys
. 4)
temporary interruption
hold selected sub-page
reveal
Personal Preferences (p. 9)
sound mode (p. 9)
overlay text on picture
time display or direct access
to a sub-page.
16/9 formats (p. 9)
Video recorder k ey (p . 9)
Menu (p . 10)
Standby (p . 8)
(red)
picture menu
(p. 8)
(green) sound menu
(yellow) features menu
programme selection
volume
(blue)
exit from menu
use of menus
/
numerical keys
mute key
Games/Digital Presets (p.8)
previous programme
Switch teletext on/off (p . 13)
"Smart controls" k eys (p . 8)
Pr ogrammable k eys (p . 8)
picture pre-setting
sound pre-setting
The keys on the TV set
The television has 3 keys: MENU, - and +.These keys are located on the top, front or
side of the set, (if on the front or side of the set they may be concealed by a flap).
The MENU key is used to select the function to be altered.The - and + keys are used
select programmes or modify the selected MENU item.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation Menu
This Menu enables you to tune in the channels on the TV set.
To call up the INSTALLATION menu:
æ
Open the
cover
Â
The INSTALLATION menu
appears on the screen.
Press the
and
keys at
the same time.
If the menu display is not stable, press the
key.
To use the menus:
These 4 keys allow you to move around in the menus, make adjustments
and access the sub-menus.
To exit from the menus
Press the blue
key.
Selecting the menu language and the country
From the INSTALLATION menu:
æ Select the LANGUAGE adjustment using the
keys.
 Select the language you wish to use by means of the or keys.
The text for all the menus will appear in the language you have chosen.
ê Select the COUNTRY adjustment using the
keys
® Select your country using the or keys (GB for Great Britain).
Warning: It is essential for correct channel tuning that these two adjustments are set
correctly.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Tuning-in the TV channels
There are two ways the television can be tuned in : automatic store or
manual store (tuning - in channel by channel).
Automatic store
From the INSTALLATION menu (
and
keys)
(after ensuring LANGUAGE and COUNTRY have been set correctly)
æ Select AUTO STORE ( keys) and press
.
The AUTO STORE menu appears. Searching begins.
The TV set searches through the complete frequency range in your local
region and stores all the programmes it finds.The search operation
takes a few minutes.When the search is complete, the INSTALLATION
menu reappears automatically.
This TV set is equipped with an Easy Tune system which automatically
sorts the programmes by name.
 If the transmitter emits the correct signal, the programmes are correctly
numbered. Go to page 7.
In certain cases, the system may ask you to indicate your local region using keys
to
.
ê If no signal is emitted, the programmes will be numbered in descending
order starting from 99, 98, 97,.. Should this occur, the SORT menu
should be used to re-number the programmes.
If no picture is found, refer to the chapter entitled "Tips" (page 17).
Sort
This menu allows you to re-number the programmes in the order you prefer.
æ Select SORT (
keys) and press
.
The SORT menu appears.The menu provides a list of all the programme
numbers with their names (where provided), or frequencies or channels.
 Using the
keys, select the programme to be re-numbered.
If, for example, you want to re-number programme 96 as 2: Select 96
using
keys (or type
).
The number chosen (96) will appear in blue in the list.
ê Press the key to enter.A yellow rectangle appears on the name of the
programme (or on its frequency or channel).
® Enter the new number using keys
to
.
In our example, type . Programme 02 appears.
The number (02) appears in blue in the list.
† Press the key to enter ( can be used to cancel).
The exchange of numbers is now complete. In our example, programme
No. 96 has become No. 02 (and programme No. 02 has become No. 96).
Repeat this operation for other programmes you wish to re-number
To exit from the menu
Press the blue
key.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Manual store
This menu allows you to store each programme manually.
From the INSTALLATION menu (
and
keys).
æ Select MANUAL STORE (
keys) and press
.
The MANUAL STORE menu appears.
 Select CHANNEL/FREQUENCY (
). For certain countries this
adjustment is not available.
Use the
keys to select tuning mode.
FREQ. (frequency search) or CHAN.C and CHAN.S (channel search if you
know the channel numbers on which the programmes are broadcast).
ê Select SYSTEM (
).
Use to select EUROPE, EUR. W, EUR. E, UK or FRANCE
(according to model).
Selecting EUROPE guarantees automatic detection, with the exception
of transmissions from France (standard LL': select FRANCE) or in
certain cases of poor reception where EUR. W (BG), EUR. E (DK) or
UK (I) should be selected.
For more information see glossary on p. 18
® Select SEARCH (
) and press
.
The search begins.As soon as a programme is found,the search will stop.
Go to section Ú.
If you know the frequency (or the channel) of the programme you
wish to receive, you can enter its number in directly using keys
numbered
to
.
If no picture is found, refer to "Tips" chapter (page 17).
If you want to rerun the search, press again.
† Select FINE TUNE (
). If reception is not satisfactory,you can use
the fine tuning function.
Hold down the
keys to adjust.
Ú Select PRG NUMBER (
)
to
Use the
keys or the
keys to enter the required number.
.
º Select STORE (
) and press
The OK message appears.The programme and its name (if it has one)
are stored.
repeat
®, Ú, º for each programme to be stored.
To exit from the menu:
Press the blue
key.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Favourite Programmes
This menu allows you to choose which programmes can be accessed
using the
key on the remote control.
From the INSTALLATION menu:
æ Select FAVOURITE PRG (
keys) and press
The FAVOURITE PRG menu appears.All programmes found during
the search are automatically included in the menu and appear in green.
 Use the
keys to select any programme you wish to remove
from the list of favourites.
ê Press to de-activate (or activate) a programme.
The de-activated programmes appear in white, the activated
programmes appear in green.
Only the programmes and EXT sockets that are displayed in green in
this menu can be accessed using the
key.
Warning: If all programmes are de-activated, the
function.
key will cease to
To exit from the menu:
Press the blue
key.
Programme names
This menu allows you to name and modify names for programmes and
EXT sockets.
From the INSTALLATION menu:
æ Select GIVE NAMES (
keys) and press
.
The GIVE NAMES menu appears with the list of programmes found
automatically during installation.
Certain programmes may not be named (the signal needed for
identification is not always transmitted) or may be inappropriately
named (only 5 characters are displayed).
 Use the
ê Use the
key to select the required programme.
keys to move to the area in which the programme name
appears (up to 5 characters).
A yellow rectangle appears in the chosen area.
® Use the
† Use the
keys to select or modify the character.
keys to move around in the next programme.
To exit from the INSTALLATION menu:
Press the blue
key twice.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the remote control
Result:
Press:
The TV set is switched off and the red indicator
lights up.To switch the TV set on again, press
Standby
or keys
to
.
For further information, see "Tips" (p. 17).
SelectingTV
programmes
Move up or down a programme.
To sequentially display all of the programmes hold
the key down for 3 seconds. Press again to cancel.
N.B.: Only programmes activated in the FAVOURITE
PRGS menu can be accessed (see p. 7).
The volume is adjusted.
Volume
Choose a programme.
For a 2 figure number, the second figure must be
entered before the dash disappears.
Numerical keys
/
Mute key
Disables or enables the sound.
Return to the last programme watched.
Previous
programme
Gives access to the presets for games consoles and
digital equipment: E1 DIGITAL, E1 GAMES BACK and
E2 GAMES FRONT (refer to p.15).
Digital and
Games Presets
(white
key)
To access the presets of the TV set.
"Smart
Controls" keys
Smart Picture Controls: Press the
key to obtain
the following settings: RICH, SOFT, NATURAL and
return to MANUAL.
Smart Sound Controls: Press the
key to obtain
the following settings: SPEECH, MUSIC, THEATRE
and return to MANUAL.
The values corresponding to these presets are given in the
PICTURE and SOUND menus (see p. 10).
These allow direct access to any adjustment made
in the PICTURE and SOUND menus (see p. 10)
To program the keys:
Programmable
keys
If, for example, you wished to gain direct access to
the BRIGHTNESS adjustment. Display the PICTURE
menu (red
key) and select BRIGHTNESS
(
). Use keys
and
to adjust, rather than
the
keys.The keys are now programmed. Exit
from the menu (blue
key). Press
and
again.This will give you direct access to the
brightness adjustment. Repeat for any other
adjustment you may wish to make.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Other functions
Result:
Press:
Pressing this key selects E1 (EXT1), E2 (EXT2) and
E2 Y/C in turn (see p. 15).
Select EXT
sockets
To continuous display of the programme number and
the information line on or off each time the programme
is changed, press this button for 3 seconds.
Screen
information
Pressing briefly displays the number, name, sound mode
and information line for a few seconds.
The information line displays the title of the programme at
the bottom of the screen.This line is only displayed for those
programmes which transmit the signal by teletext.
The time is displayed in the top right-hand corner
of the screen.
Time display
This function only exists if the programme broadcasts teletext.
Personal
Preferences
Restores the settings made in the FEATURES menu
(see p. 11). Keep the button pressed during 3 secondes
if you want to reset the adjustments per programme.
Pressing this key allows you to switch from STEREO
to MONO sound (in case of stereo transmission),
or to choose between language f or language g
(in case of bilingual transmissions).
Sound mode
For TV sets fitted with NICAM reception, the DIGITAL
message appears when a NICAM broadcast is
received.The
key allows you to switch from
DIGITAL STEREO to MONO or, for bilingual
transmissions, to choose between DIGITAL f,
DIGITAL g or MONO.
This function is used to enlarge 14/9 and 16:9 (black
band at the top and bottom of the picture) formats.
For more information, see glossary (p. 18).
16/9 Formats
Press the
simultaneously.
key and one of the following keys
Video recorder
keys
v
record,
rewind,
fast forward,
s
r
u
stop,
q
play,
G
3
programming (on certain models),
1- or 2- digit programmes,
programme selection,
enter a programme number,
standby
to
These keys function with video recorders in our range and
with all models which use the RC5 signalling standard.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the menus
æ Press the coloured key
(red, green or yellow) to display the menu
of your choice.
PICTURE
SOUND
FEATURES
 Use the
keys to select your adjustments and the
keys to
adjust or access the sub-menus.
ê Press the blue
key to exit from the menu displayed.
EXIT
Picture
æ Display PICTURE menu (red
key).
 Use the keys to select your adjustments and the
keys
You can now access the adjustments BRIGHTNESS, COLOUR,
CONTRAST and: SHARPNESS adjusts the clarity of the picture, TINT
adjusts the colour temperature of the picture from “cool”
(blue white) to “warm” (red white).
NOISE REDUCT. Useful in case of poor reception to reduce picture
noise (snowy picture).
For picture adjustment see also "Tips" (p. 17).
Sound
æ Display SOUND menu (green
key).
Â
You can now access the BALANCE TREBLE, BASS, and
,
INCR. SURROUND: This function enhances the stereo effect, giving the
impression that the speakers are positioned further apart. For mono
transmissions a stereo effect is simulated.
HEADPHONES: Allows you to adjust the headphones volume independently
from the loud-speakers on the TV set.
To exit from the menus:
Press the blue
key.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Features
Child Lock
The child lock function is an electronic lock which disables the keys
on the TV set.
æ Display the FEATURES menu (yellow
key).
 Select CHILD LOCK (
keys).
ê Use keys to switch to ON.
®
Switch off the TV set and remove the remote control.The television can
no longer be used.
The TV set can only be switched on using the remote control.
To cancel: Return CHILD LOCK to OFF in the features menu.
Storing adjustments
This function allows you to store your own picture and sound
adjustments.The adjustments are restored every time your set is
switched on, or by pressing the green
key on your remote control.
General storing
æ First carry out your PICTURE and SOUND adjustments and adjust the
volume ( key) and then:
 Display the FEATURES menu (yellow
ê Select STORE PP ALL ( keys) and press
key).
.
The message OK appears.All the PICTURE and SOUND menu
adjustments as well as the volume are stored.
Storing adjustments for each programme
This function allows you to correct any differences in levels which may
exist between TV channels and/or EXT sockets. It allows you to store
BRIGHTNESS, COLOUR, SHARPNESS, NOISE REDUCT. and volume
adjustments (
key).
æ Carry out desired corrections to settings for the programme
(or EXT connection), and then:
 Display the FEATURES menu (yellow
key).
ê Select STORE PP P: _ _ ( keys) and press
.
The message OK appears.The adjustments are stored.
Repeat for each programme that needs correcting.
Programming
Sleeptimer
From the FEATURES menu (yellow
key).
æ Select PROGRAMMING (
) and press
.
The PROGRAMMING menu appears.
 Select SLEEPTIMER and use
which the TV will switch to standby mode (up to 180 mins).
Press the key to display the length of time remaining.
to enter the length of time after
To cancel: Switch SLEEPTIMER back to 0.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Programmed Switch on
The following adjustments allow you to program the TV to
automatically switch on with the programme of your choice.
Select the adjustments using
æ SET CLOCK: Use keys to
keys:
or the
keys.
N.B.: Every time theTV is switched on the clock is automatically updated on
the basis of the teletext information in programme No. 1.
If the TV set does not feature teletext, this update will not occur.
 START TIME: Use keys
ê STOP TIME: Use keys
® PRG NUMBER: Use keys
to
to
or
or
keys.
keys.
to
or
keys.
† DAILY: Set this option to ON ( key) if you want the programming
to apply every day.
Ú TIMER ACTIVE Set this option to ON to activate the timer.
º Press the blue
key to exit from menu.
If you now switch the TV set onto standby ( key), it will
automatically switch on at the time programmed.
To cancel: Switch TIMER ACTIVE back to OFF.
N.B.: For programming to function correctly do not use the on/off key on the
front of theTV set to switch off the TV.
The programmed switch on-off can be used together with the child lock
function in order to limit the use of the TV set to a certain length of time.
Message
This menu allows you to leave a message which will appear on the screen
when the TV is switched on (e.g.:"call me when you get home").
From the FEATURES menu (yellow
æ Select MESSAGE ( ) and press
key).
.
The MESSAGE menu appears. Select the adjustments using
keys:
 CHANGE: Press the key to display CHANGE menu.
Use the
keys to select the positioning of the characters
(44 characters spaced over 2 lines).
Use the
keys to select each character.
When the message has been entered:
Press the blue
key to return to previous menu.
ê RUN: Press the key to switch to ON.
® Exit from the menu by pressing the blue
key.
key.
The message will remain on the screen.
To erase the message:
Press the blue
N.B.:The message will reappear every time the TV is switched on.
To cancel: Switch RUN back to OFF.
† CLEAR: Press key to erase message.
To exit: Press the blue
key repeatedly.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Teletext
Teletext is an information system, broadcast by certain TV channels, which can be
consulted in the same way as a newspaper.
It also provides subtitles for the hard of hearing or people who are unfamiliar with
the broadcast language (cable TV network, satellite channels, etc.).
Result:
Press:
Display or exit from teletext.
The main index page presents a list of subjects
to which you have access.
Switch teletext
on/off
Each subject has a corresponding page number
(always 3 digits).
If the selectedTV channel does not broadcast teletext,
P100 is displayed and the screen remains black (if this is
the case, switch off teletext and choose anotherTV channel).
If you have stored a favourite page, press the white
to return to the main index.
key
Selecting a
teletext page
To type in the page number required.
/
E.g.page 120, type
.The number is displayed
in the top left-hand corner of the screen,the page
counter starts searching and then the page selected is
displayed.Repeat to consult another page.
If > xxx < flashes briefly or the counter continues
searching, this means the page selected is not broadcast
or is not available. If this is the case, choose another
number.
P120
Previous page/
Next page
selection
To consult the previous page (-) or the next page (+).
Coloured zones are displayed at the bottom of the
Direct access to
a subject
screen.The coloured keys
allow access to the
subjects or their corresponding pages.
To return to the main index (generally on page 100),
Main index
press the white key
.
To return to the page displayed previously.
Previous page
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Teletext (special features)
Result:
Press:
First display your favourite page and then hold the
Favourite page
white
key down for 3 seconds to store.
This page will be displayed automatically every time
teletext is switched on.
You can store a different page for each programme.
Consult the main index to find out the page number
for subtitles. Enter the subtitles page number (e.g. 888).
The page counter searches and then the subtitles
appear on screen. If no subtitles are available the page
counter will continue to search.
Subtitles
/
To exit from subtitles, press
.
Temporary
interruption of
the display
To stop or return to the teletext display.The L
symbol is displayed, and the television programme
reappears on the screen.This function allows you to
wait when the search for pages takes a long time.
Enlarging a page
To display the upper part, the lower part and then
to return to the normal page size.
To activate/de-activate the screen overlay.
Overlaying
teletext on the
TV picture
To reveal/conceal hidden information (solutions to
games or questions/answers).
Reveal
Certain pages have sub-pages which follow on
automatically. If this is the case, this key will allow
you to stop or start the sequence.The message I
appears on the top left-hand corner of the screen.
Stop the
sequence of sub-
pages (hold)
Direct selection
of a sub-page
To access a sub-page directly, press
.The page
number followed by four dashes will appear in the
bottom left-hand corner of the screen.Type the
number of the sub-page required using 4 numbers,
e.g. type 0002 to consult sub-page 2.
The page counter searches and then the sub-page is
displayed. Press
to return to current page.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting peripheral equipment
The EXT1 socket has audio and video inputs/outputs and RGB inputs.
The EXT2 socket has audio and video inputs/outputs and S-VHS inputs.
For further information, see glossary (p. 18).
Video recorder
...with Decoder
• If your video recorder has a euroconnector socket, carry out the above
connections. Euroconnector sockets ensure better picture quality.
•
If your video recorder does not have a euroconnector socket (or if this is
already being used by another device), then the only connection possible is via
the aerial cable.Your video recorder is then considered as a TV programme by
your TV set.You will therefore need to tune in your video recorder's test signal
and assign it programme number 0 (see manual store chapter, p. 5).
To reproduce the video recorder picture, press the
key.
Refer to your video recorder's operating instructions concerning the test signal
(the video recorder must be equipped with an HF modulator).
Connecting other equipment
(satellite receiver, decoder, CDV/CDI, games...)
Connect to socket EXT1 (or to EXT2 if it produces a S-VHS signals).
To select connected equipment
•
Use
Most equipment (decoder, video recorder) carries out the switchover itself.
• The white key may also be used to select the sockets with adapted Smart
key to select E1 (EXT1), E2 (EXT2) or, for S-VHS or Hi-8 equipment, E2 Y/C.
Controls: E1 DIGITAL (for digital equipment connected to EXT1), E1 GAMES BACK
(for games connected to EXT1) and E2 GAMES FRONT (for games connected to
the VIDEO socket on the front panel).
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Front connections
Carry out one of the following connections and then:
Use the
key to select E2 (for VHS or 8mm cameras) or E2 Y/C (S-VHS or
Hi-8 cameras).
For a mono sound camcorder, connect the audio signal to the AUDIO L input.
Use the
key to reproduce the sound on the left and right loudspeakers of
the television.
N.B.: If a peripheral is connected to EXT2, it is advisable to switch it off while using
a front S-VHS connection.
Amplifier
Use an audio connection cable and connect the P sockets "L" and "R" on
the set to the "AUDIO IN" "L" and "R" input on your hi-fi amplifier.
Headphones
To adjust the headphones volume, use the HEADPHONES adjustment in the SOUND
menu (p. 10).To adjust the volume on the TV set, use the
You can also access the HEADPHONES adjustment directly using programmable keys
and on the remote control (see p. 8).
or
keys.
To make a copy of recordings:
Carry out one of the following connections, then:
Press
to select E1.
On the video recorder, select the euroconnector socket as the recording source.
N.B.: Copying is not possible using front connections.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Tips
Poor reception
The proximity of mountains or high buildings may be responsible for ghost pictures,
echoing or shadows. If this is the case, modify the orientation of the outside aerial.
Check that the TV channel is tuned in correctly or try using fine tuning:see "fine tuning" (p. 6).
The equipment connected to the TV gives a picture in black and white? Check that you
have selected the correct E2 or E2 Y/C socket (
key).
No picture
Have you forgotten to connect the aerial socket? Have you chosen the correct system?
(p. 6) Does your aerial enable you to receive broadcasts in this frequency range?
Poorly connected euroconnector cables or aerial sockets are often the cause of picture
or sound problems (sometimes the connectors can become half disconnected if the TV
set is moved or turned). Check all connections.
Picture adjustment
If you have trouble obtaining a clear picture, select one of the smart control presets
(p. 8) and store using the STORE PP ALL function in the FEATURES menu.
The picture seems too red or too blue! Adjust the TINT (p.10).
In the event of difficult reception (snowy picture) switch the NOISE.REDUCT on
the PICTURE menu to ON. (p. 10).
The picture is badly adjusted? press the green
To reset the stored settings for each programme and return to the initial settings, hold
the green key down for 3 seconds.
key or re-adjust (p. 10).
No sound
If on certain channels you receive a picture but have no sound, this means that you do
not have the correct TV system. Modify the SYSTEM adjustment (p. 6).
Remote control
The TV set does not react to the remote control; the orange indicator on the TV set
no longer flashes when you use the remote control? Replace the batteries.
Standby
When you switch the TV set on it remains in standby mode and the indication
CHILD LOCK is displayed when you use the keys on the TV set?The child lock function
is switched on (p. 11).
To save electricity it is advisable to switch the TV set off using the ON/OFF key on the
front of the set. If the set receives no signal for 15 mins, it automatically goes into
standby mode.
Various
The menus appear in a different language? Re-select language choice (p. 4).
Characters remain displayed on the screen? The MESSAGE function is switched on
(p. 12).The
key on the remote control no longer functions? Re-select
FAVOURITE PRG menu (p. 7).
Still no results ?
If you have a problem with your TV set, never attempt to repair it yourself: contact
your dealer's after-sales service.
Recycling directive
Your TV set uses materials which are reusable or which can be recycled.
To minimise the amount of waste in the environment, specialist companies recover used
sets for dismantling and collection of reusable materials (consult your dealer).
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Glossary
EasyTune: A system for automatically installing and storing programmes.
PAL SECAM colour coding:
PAL is used in the majority of European countries,
SECAM in France, the CIS and the majority of African countries.
The United States and Japan use a different system called NTSC.
RGB Signals: These are separate Red, Green and Blue signals which directly drive
the red, green and blue emmitterers in the cathode ray tube.
Using these signals provides better picture quality.
S-VHS Signals: These are 2 separate video signals from the S-VHS and HI-8 recording
standards.The luminance signalsY (black and white) and chrominance signals C
(colour) are recorded separately on the tape.This provides better picture quality
than with normal videos (VHS and 8mm), where the Y/C signals are combined to
give only one signal.
Smart controls: Allow access to a series of picture and sound presets.
MONO sound: The sound is in mono when only one channel is transmitted.
STEREO sound: The sound is in stereo when the left and right channels are
transmitted separately.
NICAM sound: Process by which digital sound can be transmitted.
System:Television pictures are not broadcast in the same way in all countries.
There are different standards: BG, DK, I and L L' (France).
The SYSTEM adjustment is used to select these different standards.
16/9: Refers to the ratio between the length and height of the screen.Wide screen
televisions have a ratio of 16/9, that of your TV set is 4/3.
Warning:If you intend to watch a 4/3 ratio picture in a 16/9 ratio format, the picture
will be compressed vertically.
14/9 (only on certain models):
Intermediate format which, by enlarging the picture, reduces the size of the black
bands at the top and bottom of the pictures in cinemascope format.
Index
16/9 (formats) ............................................9
Child lock..................................................11
Connections.............................................15
Decoder, (CDV),(CDI) and Games......15
Favourite programmes .............................7
Features.....................................................10
Fine tuning...................................................6
Headphones........................................10-16
Language used for menus ........................4
Menus.....................................................4-10
Messages....................................................11
Picture (adjustments) .............................11
Programmable keys...................................8
Programme names.....................................7
Programme number display.....................9
Programmes................................................8
Programming............................................12
Remote control .........................................3
Selecting EXT sockets........................9-15
Sleeptimer.................................................11
"Smart controls" ........................................8
Sort ...............................................................5
Sound (adjustments)...............................10
Stereo/ mono/ NICAM (sound mode).9
Storing adjustments................................11
Systems........................................................6
Teletext......................................................13
Time (display)...........................................13
Tuning in TV channels ...............................5
TV keys ........................................................3
Video recorder (keys) ........................9-15
18
Download from Www.Somanuals.com. All Manuals Search And Download.
|