Owner’s Manual
ATTENTION:
Please read the content
of your owner’s manual
before operating your
scooter.
The Ultimate In Style & Performance®
Exeter, PA
St. Catharines, ON
1-800-800-8586
Download from Www.Somanuals.com. All Manuals Search And Download.
C O N T E N T S
I.
INTRODUCTION......................................................................................................................... 4
II. SAFETY ......................................................................................................................................... 5
III. EMI/RFI ........................................................................................................................................ 14
IV. SPECIFICATIONS ................................................................................................................... 15
V. YOUR SCOOTER...................................................................................................................... 17
VI. BATTERIES AND CHARGING ............................................................................................ 21
VII. OPERATION............................................................................................................................... 25
VIII.COMFORT ADJUSTMENTS................................................................................................ 27
IX. DISASSEMBLY AND ASSEMBLY ..................................................................................... 30
X. BASIC TROUBLESHOOTING ............................................................................................. 33
XI. CARE AND MAINTENANCE ................................................................................................ 35
XII. WARRANTY ............................................................................................................................... 37
Sundancer
3
Download from Www.Somanuals.com. All Manuals Search And Download.
I . I N T R O D U C T I O N
SAFETY
WELCOME to Pride Mobility Products Corporation (Pride). The product you have purchased combines state-
of-the art components with safety, comfort, and styling in mind. We are confident the design features will provide
you with the conveniences you expect during your daily activities. Understanding how to safely operate and care
for this product should bring you years of trouble free operations and service.
Read and follow all instructions, warnings, and notes in this manual and all other accompanying literature before
attempting to operate this product for the first time. In addition, your safety depends upon you, as well as your
provider, caretaker, or healthcare professional in using good judgement.
If there is any information in this manual which you do not understand, or if you require additional assistance for
setup or operation, please contact your authorized Pride Provider. Failure to follow the instructions, warnings,
and notes in this manual and those located on your Pride product can result in personal injury or product
damage and will void Pride’s product warranty.
PURCHASER’S AGREEMENT
By accepting delivery of this product, you promise that you will not change, alter, or modify this product or remove
or render inoperable or unsafe any guards, shields, or other safety features of this product; fail, refuse, or neglect to
install any retrofit kits from time to time provided by Pride to enhance or preserve the safe use of this product.
INFORMATION EXCHANGE
We want to hear your questions, comments, and suggestions about this manual. We would also like to hear about
the safety and reliability of your new scooter, and about the service you received from your authorized Pride
Provider. Please notify us of any change of address, so we can keep you apprised of important information about
safety, new products, and new options that can increase your ability to use and enjoy your scooter. Please feel free
to contact us at the address below:
Pride Mobility Products Corporation
Attn: Customer Care Department
182 SusquehannaAve.
Exeter, PA 18643-2694
NOTE: If you ever lose or misplace your product registration card or your copy of this manual, contact
us and we will be glad to send you a new one immediately.
PRIDE OWNERS CLUB
As an owner of a Pride product, you are encouraged to enroll in the Pride Owners Club. Complete and return your
From our home page, select “Owners Club” to enter a page dedicated to current and potential Pride product
owners.You will gain access to interviews, stories, recreation ideas, daily living tips, product and funding informa-
tion, and interactive message boards. These message boards invite you to communicate with other Pride custom-
ers as well as Pride representatives who are available to assist you with any questions or concerns.
4
Sundancer
Download from Www.Somanuals.com. All Manuals Search And Download.
I I . S A F E T Y
GENERAL
MANDATORY! Do not operate your new scooter for the first time without completely reading
and understanding this owner’s manual.
Your scooter is a state-of-the-art life-enhancement device designed to increase mobility. Pride provides an exten-
sive variety of products to best fit the individual needs of the scooter user. Please be aware that the final selection
and purchasing decision regarding the type of scooter to be used is the responsibility of the scooter user who is
capable of making such a decision and his/her healthcare professional (i.e., medical doctor, physical therapist, etc.).
The contents of this manual are based on the expectation that a mobility device expert has properly fitted the
scooter to the user and has assisted the prescribing healthcare professional and/or the authorized Pride Provider in
the instruction process for the use of the product.
There are certain situations, including some medical conditions, where the scooter user will need to practice
operating the scooter in the presence of a trained attendant.A trained attendant can be defined as a family member
or care professional specially trained in assisting a scooter user in various daily living activities.
As you begin using your scooter during daily activities, you will probably encounter situations in which you will
need some practice. Simply take your time and you will soon be in full and confident control as you maneuver
through doorways, on and off elevators, up and down ramps, and over moderate terrain.
Below are some precautions, tips, and other safety considerations that will help the user become accustomed to
operating the scooter safely.
MODIFICATIONS
Pride has designed and engineered your scooter to provide maximum mobility and utility. However, under no
circumstances should you modify, add, remove, or disable any feature, part, or function of your scooter.
WARNING! Do not modify your scooter in any way not authorized by Pride. Unauthorized
modifications may result in personal injury and/or damage to your scooter.
REMOVABLE PARTS
WARNING! Do not attempt to lift or move your scooter by any of its removable parts.
Personal injury and damage to the scooter may result.
Sundancer
5
Download from Www.Somanuals.com. All Manuals Search And Download.
I I . S A F E T Y
PRE-RIDE SAFETY CHECK
Get to know the feel of your scooter and its capabilities. Pride recommends that you perform a safety check before
each use to make sure your scooter operates smoothly and safely.
Perform the following inspections prior to using your scooter:
n Check for proper tire inflation (if equipped with pneumatic tires).
n Check all electrical connections. Make sure they are tight and not corroded.
n Check all harness connections. Make sure they are secured properly.
n Check the brakes (freewheel lever in drive mode).
n Check battery charge.
If you discover a problem, contact your authorized Pride Provider for assistance.
TIRE INFLATION
If your scooter is equipped with pneumatic tires, you should check or have the air pressure checked at least once
a week. Proper inflation pressures will prolong the life of your tires and help ensure the smooth operation of your
scooter.
WARNING! It is critically important that 30-35 psi tire pressure be maintained in pneumatic
tires at all times. Do not underinflate or overinflate your tires. Low pressure may result in
loss of control, and overinflated tires may burst. Failure to maintain 30-35 psi tire pressure
in pneumatic tires at all times may result in tire and/or wheel failure, causing serious
personal injury and/or damage to your scooter.
WARNING! Inflate your scooter tires from a regulated air source with an available pressure
gauge. Inflating your tires from an unregulated air source could overinflate them, resulting
in a burst tire and/or personal injury.
WEIGHT LIMITATIONS
Your scooter is rated for a maximum weight capacity. Refer to the specifications table for information.
WARNING! Exceeding the weight capacity voids your warranty and may result in personal
injury and damage to your scooter. Pride will not be held responsible for injuries and/or
property damage resulting from failure to observe weight limitations.
WARNING! Do not carry passengers on your scooter. Carrying passengers may result in
personal injury and/or property damage.
INCLINE INFORMATION
More and more buildings have ramps with specified degrees of inclination, designed for easy and safe access.
Some ramps may have turning switchbacks (180-degree turns) that require you to have good cornering skills on
your scooter.
n Proceed with extreme caution as you approach the downgrade of a ramp or other incline.
n Take wide swings with your scooter around any tight corners. If you do that, the scooter’s rear wheels will
follow a wide arc, not cut the corner short, and not bump into or get hung up on any railing corners.
n When driving down a ramp, keep the scooter’s speed adjustment set to the slowest speed setting to ensure a
safely controlled descent.
n Avoid sudden stops and starts.
6
Sundancer
Download from Www.Somanuals.com. All Manuals Search And Download.
I I . S A F E T Y
When climbing an incline, try to keep your scooter moving. If you must stop, start up again slowly, and then
accelerate cautiously.When driving down an incline, do so by setting the speed adjustment dial to the slowest
setting and driving in the forward direction only. If your scooter starts to move down the incline faster than you
anticipated or desired, allow it to come to a complete stop by releasing the throttle control lever. Then push the
throttle control lever forward slightly to ensure a safely controlled descent.
WARNING! When climbing an incline, do not zigzag or drive at an angle up the face of the
incline. Drive your scooter straight up the incline. This greatly reduces the possibility of a
tip or a fall. Always exercise extreme caution when negotiating an incline.
WARNING! Do not drive your scooter across the side of an incline or diagonally up or down
an incline; do not stop, if possible, while driving up or down an incline.
WARNING! You should not travel up or down a potentially hazardous incline (i.e., areas
covered with snow, ice, cut grass, or wet leaves).
WARNING! When on any sort of an incline or decline, never place the scooter in freewheel
mode while seated on it or standing next to it.
WARNING! Even though your scooter is capable of climbing slopes greater than those
illustrated in figure 1, do not, under any circumstances, exceed the incline guidelines or
any other specifications presented in this manual. Doing so could cause instability in your
scooter, resulting in personal injury and/or damage to your scooter.
Handicap public access ramps are not subject to government regulation in all countries, and therefore do not
necessarily share the same standard percent of slope. Other inclines may be natural or, if man-made, not designed
specifically for scooters. Figures 1 illustrates your scooter’s stability and its ability to climb grades under various
weight loads and under controlled testing conditions.
These tests were conducted with the scooter’s seat in the highest position and adjusted rearward on the seat base
to its farthest rearward position. Use this information as a guideline.Your scooter’s ability to travel up inclines is
affected by your weight, your scooter’s speed, your angle of approach to the incline, and your scooter setup.
150-200 lbs 250-300 lbs
9˚ (15.8%)
8˚ (14.1%)
Figure 1. Maximum Recommended Incline Angles
WARNING! Any attempt to climb or descend a slope steeper than that shown in figure1
may put your scooter in an unstable position and cause it to tip, resulting in personal
injury.
WARNING! Never carry an oxygen tank weighing more than 15 lbs. Never fill the rear
basket with contents exceeding 15 lbs.
Sundancer
7
Download from Www.Somanuals.com. All Manuals Search And Download.
I I . S A F E T Y
When you approach an incline, it is best to lean forward. See figures 2 and 2A. This shifts the center of gravity of
you and your scooter toward the front of the scooter for improved stability.
NOTE: When negotiating ramps, if the throttle control lever is released while moving forward, the
powered scooter may "rollback" approximately 1 foot before the brake engages. If the throttle control
lever is released while moving in reverse, the powered scooter may "rollback" approximately 3 feet
before the brake engages.
Figure 2A. Increased Stability Driving Position
Figure 2. Normal Driving Position
CORNERING INFORMATION
Excessively high cornering speeds can create the possibility of tipping. Factors which affect the possibility of
tipping include, but are not limited to, cornering speed, steering angle (how sharply you are turning), uneven road
surfaces, inclined road surfaces, riding from an area of low traction to an area of high traction (such as passing from
a grassy area to a paved area – especially at high speed while turning), and abrupt directional changes. High
cornering speeds are not recommended. If you feel that you may tip over in a corner, reduce your speed and
steering angle (i.e., lessen the sharpness of the turn) to prevent your scooter from tipping.
WARNING! When cornering sharply, reduce your speed. When using your scooter at higher
speeds, do not corner sharply. This greatly reduces the possibility of a tip or fall. To avoid
personal injury or property damage, always exercise common sense when cornering.
BRAKING INFORMATION
Your scooter is equipped with these powerful brake systems:
n Regenerative: Uses electricity to rapidly slow the vehicle when the throttle control lever returns to the center/
stop position.
n Disc Park Brake:Activates mechanically after regenerative braking slows the vehicle to near stop, or when
power is removed from the system for any reason.
8
Sundancer
Download from Www.Somanuals.com. All Manuals Search And Download.
I I . S A F E T Y
OUTDOOR DRIVING SURFACES
Your scooter is designed to provide optimum stability under normal driving conditions—dry, level surfaces com-
posed of concrete, blacktop, or asphalt. However, Pride recognizes that there will be times when you will encoun-
ter other surface types. For this reason, your scooter is designed to perform admirably on packed soil, grass, and
gravel. Feel free to use your scooter safely on lawns and in park areas.
n Reduce your scooter’s speed when driving on uneven terrain and/or soft surfaces.
n Avoid tall grass that can become tangled in the running gear and wrapped around the axle.
n Avoid loosely packed gravel and sand.
n If you feel unsure about a driving surface, avoid that surface.
PUBLIC STREETS AND ROADWAYS
WARNING! You should not operate your scooter on public streets and roadways. Be aware
that it may be difficult for traffic to see you when you are seated on your scooter. Obey all
local pedestrian traffic rules. Wait until your path is clear of traffic, and then proceed with
extreme caution.
STATIONARY OBSTACLES (STEPS, CURBS, ETC.)
WARNING! Do not drive near raised surfaces, unprotected ledges, and/or drop-offs (curbs,
porches, stairs, etc.).
WARNING! Do not attempt to have your scooter climb or descend an obstacle that is
inordinately high. Serious personal injury and/or damage may result.
WARNING! Do not attempt to have your scooter proceed backward down any step, curb, or
other obstacle. This may cause the scooter to tip and cause personal injury.
WARNING! Be sure your scooter is traveling perpendicular to any curb you may be required
to ascend or descend. See figures 3 and 3A.
WARNING! Do not attempt to negotiate a curb that has a height greater than 2 in.
Figure 3. Correct Curb Approach
Figure 3A. Incorrect Curb Approach
Sundancer
9
Download from Www.Somanuals.com. All Manuals Search And Download.
I I . S A F E T Y
INCLEMENT WEATHER PRECAUTIONS
Exposure of your scooter to inclement weather conditions should be avoided whenever possible. If suddenly
caught up in rain, snow, severe cold or heat while operating your scooter proceed to shelter at the earliest oppor-
tunity.Thoroughly dry your scooter before storing, charging, or operating your scooter.
WARNING! Operating in rain, snow, salt, mist/spray conditions, and on icy/slippery surfaces
can cause personal injury and/or damage to the scooter and electrical system. Maintain
and store your scooter in a dry and clean condition.
FREEWHEEL MODE
Your scooter is equipped with a manual freewheel lever that, when pushed down, allows the scooter to be pushed.
For more information about how to place your scooter into and out of freewheel mode, see V. “Your Scooter.”
WARNING! When your scooter is in freewheel mode, the braking system is disengaged.
n Disengage the drive motors only on a level surface.
n Ensure the key is removed from the key switch.
n Stand behind the scooter to engage or disengage freewheel mode. Never sit on a
scooter to do this.
n After you have finished pushing your scooter, always return it to the drive mode to lock
the brakes.
Failure to heed the above could result in personal injury and/or damage to your scooter.
An added feature built into the scooter is “push-too-fast” protection which safeguards the scooter against gaining
excessive speed while in freewheel mode.
“Push-too-fast” operates differently depending on which of two conditions exists:
n If the key is switched “off” while in freewheel mode, the scooter’s controller activates regenerative braking
when the scooter is pushed faster than a maximum threshold which has been preprogrammed. In this case, the
controller is acting as a speed governor.
n If the key is switched “on” while in freewheel mode, you will encounter considerable resistance at any speed.
This prevents the scooter from gaining unwanted momentum should the manual freewheel lever inadvertently
be released while driving the scooter.
STAIRS AND ESCALATORS
Scooters are not designed to travel up or down stairs or escalators.Always use an elevator.
WARNING! Do not use your scooter to negotiate steps or escalators. You may cause injury
to yourself and to others and/or damage your scooter.
DOORS
n Determine if the door opens toward or away from you.
n Use your hand to turn the knob or push the handle or push-bar.
n Drive your scooter gently and slowly forward to push the door open. Or drive your scooter gently and slowly
backwards to pull the door open.
10
Sundancer
Download from Www.Somanuals.com. All Manuals Search And Download.
I I . S A F E T Y
DOORS
n Determine if the door opens toward or away from you.
n Use your hand to turn the knob or push the handle or push-bar.
n Drive your scooter gently and slowly forward to push the door open. Or drive your scooter gently and slowly
backwards to pull the door open.
ELEVATORS
Modern elevators have a door edge safety mechanism that, when pushed, reopens the door(s).
n If you are in the doorway of an elevator when the door(s) begin to close, push on the rubber door edge or
allow the rubber door edge to contact the scooter and the door will reopen.
n Use care that pocketbooks, packages, or scooter accessories do not become caught in elevator doors.
LIFT/ELEVATION PRODUCTS
If you will be traveling with your scooter, you may find it necessary to use a lift/elevation product to aid in transpor-
tation. Pride recommends that you closely review the instructions, specifications, and safety information set forth
by the manufacturer of the lift/elevation product before using that product.
BATTERIES
In addition to following the warnings below, be sure to comply with all other battery handling information.
WARNING! Scooter batteries are heavy (refer to specifications table). Lifting weight beyond
your capacity could result in personal injury. If necessary, get someone physically able to
lift the scooter batteries for you.
WARNING! Battery posts, terminals, and related accessories contain lead and lead
compounds. Wash hands after handling.
WARNING! Always protect the batteries from freezing and never charge a frozen battery.
Charging a frozen battery may result in personal injury and/or damage to the battery.
WARNING! RED (+) cables must be connected to positive (+) battery terminals/posts. BLACK
(-) cables must be connected to negative (-) battery terminals/posts. Failure to connect
your battery harnesses in the proper manner may result in personal injury and/or damage
to your scooter. REPLACE cables immediately if damaged.
BATTERY DISPOSAL AND RECYCLING
If you encounter a damaged or cracked battery, immediately enclose it in a plastic bag and call your authorized
Pride Provider for instructions on disposal.Your authorized Pride Provider will also have the necessary information
on battery recycling, which is our recommended course of action.
PREVENTING UNINTENDED MOVEMENT
WARNING! If you anticipate being seated in a stationary position for an extended period
of time, turn off the power. This will prevent unexpected motion from inadvertent throttle
control lever contact. Failure to do so may result in personal injury.
Sundancer
11
Download from Www.Somanuals.com. All Manuals Search And Download.
I I . S A F E T Y
MOTOR VEHICLE TRANSPORT
Currently, there are no standards approved for tie-down systems in a moving vehicle of any type to transport a
person while seated in a scooter.
Although your scooter may be equipped with a positioning belt, this belt is not designed to provide proper restraint
during motor vehicle transport.Anyone traveling in a motor vehicle should be properly secured in the motor vehicle
seat with safety belts fastened securely.
WARNING! Do not sit on your scooter while it is in a moving vehicle. Personal injury and/or
property damage may result.
WARNING! Always be sure your scooter and its batteries are properly secured when it is
being transported. Failure to do so may result in personal injury and/or damage to your
scooter.
SECUREMENT POINTS
Steel loops welded to the frame of your scooter provide securement points. These should only be used with an
unoccupied scooter and secured by an approved securement system in accordance with the manufacturer’s in-
structions. Pride makes no representation of suitability for use with specific securement systems nor can we antici-
pate the various situations that might arise in use of public transportation systems. For detailed instructions on the
use of securements refer to the applicable municipal transit authority and/or manufacturer of the system used.
WARNING! DO NOT leave the scooter in freewheel mode when tieing it down for transport.
WARNING! DO NOT use your scooter as a seat in a moving vehicle.
GETTING ONTO AND OFF OF YOUR SCOOTER
Getting onto and off of your scooter requires a good sense of balance. Please observe the following safety tips
when getting onto and off of your scooter:
n Remove the key from the key switch.
n Ensure that your scooter is not in freewheel mode. See V. “Your Scooter.”
n Make certain that the seat is locked into place and the key is removed from the key switch.
n Pivot the armrests up to make getting onto and off of the scooter easier.
WARNING! Position yourself as far back as possible in the scooter seat to prevent the
scooter from tipping and causing injury.
WARNING! Avoid using your armrests for weight bearing purposes. Such use may cause
the scooter to tip and cause personal injury.
WARNING! Avoid putting all of your weight on the floorboard. Such use may cause the
scooter to tip and cause personal injury.
12
Sundancer
Download from Www.Somanuals.com. All Manuals Search And Download.
I I . S A F E T Y
REACHING AND BENDING
Avoid reaching or bending while driving your scooter.When reaching, bending, or leaning while seated on your
scooter, it is important to maintain a stable center of gravity and keep the scooter from tipping. Pride recommends
that the scooter user determine his/her personal limitations and practice bending and reaching in the presence of a
qualified healthcare professional.
WARNING! Do not bend, lean, or reach for objects if you have to pick them up from the
floor. Movements such as these may change your center of gravity and the weight
distribution of the scooter and cause your scooter to tip, possibly resulting in personal
injury.
WARNING! Prevent personal injury! Keep your hands away from the tires when driving. Be
aware that loose fitting clothing can become caught in drive tires.
POSITIONING BELTS
Your authorized Pride Provider, therapist(s), and other healthcare professionals are responsible for determining
your requirement for a positioning belt in order to operate your scooter safely.
WARNING! If you require a positioning belt to safely operate your scooter, make sure it is
fastened securely. Serious personal injury may result if you fall from the scooter.
PRESCRIPTION DRUGS/PHYSICAL LIMITATIONS
The scooter user must exercise care and common sense when operating his/her scooter.This includes awareness of
safety issues when taking prescribed or over-the-counter drugs or when the user has specific physical limitations.
WARNING! Consult your physician if you are taking prescribed or over-the-counter
medication or if you have certain physical limitations. Some medications and limitations
may impair your ability to operate your scooter in a safe manner.
ALCOHOL
The scooter user must exercise care and common sense when operating his/her scooter.This includes awareness
of safety issues while under the influence of alcohol.
WARNING! Do not operate your scooter while you are under the influence of alcohol, as
this may impair your ability to drive safely.
Sundancer
13
Download from Www.Somanuals.com. All Manuals Search And Download.
I I I . E M I / R F I
Electromagnetic and Radio Frequency Interference (EMI/RFI)
WARNING! Laboratory tests have shown that electromagnetic and radio frequency waves
can have an adverse affect on the performance of electrically-powered mobility vehicles.
Electromagnetic and Radio Frequency Interference can come from sources such as cellular phones, mobile two-
way radios (such as walkie-talkies), radio stations, TV stations, amateur radio (HAM) transmitters, wireless
computer links, microwave signals, paging transmitters, and medium-range mobile transceivers used by emergency
vehicles. In some cases, these waves can cause unintended movement or damage to the control system. Every
electrically-powered mobility vehicle has an immunity (or resistance) to EMI. The higher the immunity level, the
greater the protection against EMI. This product has been tested and has passed at an immunity level of 20 V/m.
PROHIBITED! To prevent unintended movement, turn off the power to the electrically-
powered mobility vehicle before using a cell phone, two-way radio, lap-top, or any other
type of radio transmitter. Avoid coming into close proximity of radio or TV stations.
WARNING! The addition of accessories or components to the electrically-powered mobility
vehicle can increase the susceptibility of the vehicle to EMI. Do not modify your scooter in
any way not authorized by Pride.
WARNING! The electrically-powered mobility vehicle itself can disturb the performance
of other electrical devices located nearby, such as alarm systems.
unintended motion or brake release occurs, turn your scooter off as soon as it is safe to do so. Call Pride
at 800-424-8205 to report the incident.
14
Sundancer
Download from Www.Somanuals.com. All Manuals Search And Download.
I V . S P E C I F I C A T I O N S
16"
8"
Adjustable
90 ,100
102 ,105
3.5"
Length
17"
42"
16"
22.5"- 31"
38"
Turning Radius
23.5"
Figure 4. Scooter Dimensions
2.5"
9"
Figure 4A. Wheel dimensions (Front And Rear)
Sundancer
15
Download from Www.Somanuals.com. All Manuals Search And Download.
I V . S P E C I F I C A T I O N S
SC2000PS
Model Numbers
Painted: Candy Apple Red, Viper Blue
Available Colors
42 in.
Overall Length
23.5 in.
Overall Width
146 lbs.
Rear frame: 69 lbs.
38 in.
Total Weight Without Batteries
Heaviest Piece When Disassembled
Turning Radius
Variable up to 4.5 mph
Speed (max)
Range Per Charge*
Ground Clearance
Weight Capacity
(With 32 AH batteries) Up to 20 - 25 miles
3.5 in.
300 lbs.
Type: Contoured low back
Dimensions: 17 in. width
Standard Seating
16 in. depth (usable)
16 in. height (usable)
Material: Gray, Beige or Black Vinyl; Gray or Brown fabric
Rear-wheel drive, sealed transaxle with a 24-volt DC motor
Electronic, regenerative and electromechanical
Aluminum alloy wheels in Black
Type: solid; front: 2.5 in. x 9 in., rear: 2.5 in. x 9 in.
Type: Two 12-volt deep-cycle (AGM or Gel-Cell type recommended)
Size: (U-1) 32 AH
Drive System
Dual Braking System
Wheels
Tires
Battery Requirements
Weight: 25 lbs. each
Onboard charger
Battery Charger
* Varies with user weight terrain type, battery charge, battery condition, and tire pressure.
16
Sundancer
Download from Www.Somanuals.com. All Manuals Search And Download.
V . Y O U R S C O O T E R
TILLER CONSOLE
The tiller console houses all of the controls needed todrive your scooter, including the speed adjustment dial, throttle
control lever, battery condition meter, running lights switch, hazard light switch, power seat switch, turn signal but-
tons, status LED, and horn buttons. See figure 5.
WARNING! Do not expose the tiller console to moisture. In the event that the tiller console
does become exposed to moisture, do not attempt to operate your scooter until the tiller
console has dried thoroughly.
BATTERY CONDITION METER
STATUS LED
SPEED ADJUSTMENT DIAL
HAZARD LIGHT SWITCH
HORN BUTTON
KEY SWITCH
RUNNING LIGHT
SWITCH
TURN SIGNAL BUTTON (RIGHT)
TURN SIGNAL BUTTON (LEFT)
HORN BUTTON
THROTTLE CONTROL
LEVER (REVERSE)
THROTTLE CONTROL LEVER
(FORWARD)
5-AMP FUSE
POWER SEAT SWITCH
Figure 5. Tiller Console
Key Switch
n Insert the key into the key switch and turn it clockwise topower up (turn on) your scooter.
n Turn the key counterclockwisetopowerdown(turnoff) your scooter.
WARNING! If the key is moved to the off position while your Sundancer is in motion, the
electronic brakes will engage and your Sundancer will come to an abrupt stop!
Throttle Control Lever
This lever allows you to control the forward speed and the reverse speed of your scooter up to the maximum
speed you preset with the speed adjustment dial.
n Place your right hand on the right handgrip and your left hand on the left handgrip.
n Use your right thumb to push the right side of the lever to disengage your scooter’s brakes and move forward.
n Release the lever and allow your scooter to come to a complete stop before pushing the other side of the lever
to move in reverse.
n When the throttle is completely released, it automatically returns to the center “stop” position and engages your
scooter’s brakes.
Sundancer
17
Download from Www.Somanuals.com. All Manuals Search And Download.
V . Y O U R S C O O T E R
Speed Adjustment Dial
This dial allows you to preselect and limit your scooters’s top speed.
n The image of the tortoise represents the slowest speed setting.
n The image of the hare represents the fastest speed setting.
Running Lights Switch
This switch controls your scooter’s front and rear running lights.
n Toggle the switch forward to turn on your scooter’s running lights.
n Toggle the switch back to turn off your scooter’s running lights.
Power Seat Switch
This switch, when toggled on, enables you to raise or lower the power seat using the throttle control lever.
Horn Buttons
The scooter must be turned on for the horn to be operational.
n These buttons activate a warning horn.
n Do not hesitate to use the warning horn when doing so may prevent accident or injury.
Hazard Lights Switch
This switch activates the 4-way flashers on your scooter.
n Toggle the switch forward to turn on the flashers.
n Toggle the switch back to turn off the flashers.
Turn Signal Buttons
n Press the appropriate turn signal button once to activate it.
n Your scooter’s turn signals are timed to shut off automatically.
Status LED
The status LED will alert you to electrical problems that may occur with the scooter.The LED remains constantly
lit while your scooter is on. If the scooter develops an electrical problem, the status LED will flash a code. See X.
“Basic Troubleshooting.” If the status LED flashes a code other than a code listed in “Basic Troubleshooting,”
contact the Pride Technical Service Department by calling 1-800-800-8586.
5-Amp Fuse
The fuse helps protect your scooter’s lighting and tiller console systems from receiving an overload of electrical
current. The fuse used in your scooter is the same type used in automobiles. See XI. “Care and Maintenance” for
fuse replacement.
18
Sundancer
Download from Www.Somanuals.com. All Manuals Search And Download.
V . Y O U R S C O O T E R
REAR SECTION
The onboard battery charger (not shown), the charger power cord receptacle, the batteries (not shown), the main
circuit breaker reset button, the ammeter, the manual freewheel lever, the anti-tip wheels, and the motor/transaxle
assembly are located on the rear section of your Sundancer. See figure 6.
AMMETER
MAIN CIRCUIT BREAKER
CHARGER POWER CORD
RECEPTACLE
RESET BUTTON
MOTOR/TRANSAXLE
ASSEMBLY
MANUAL
FREEWHEEL
LEVER
ANTI-TIP WHEELS
Figure 6. Rear Section
Charger Power Cord Receptacle
The charger power cord plugs into the onboard battery charger by means of the charger power cord receptacle.
Ammeter
During charging, the ammeter indicates the charging rate, or how hard the charger is working to charge the
Sundancer’s batteries. See VI. “Batteries and Charging.”
Main Circuit Breaker (Reset Button)
When the voltage in your Sundancer’s batteries becomes low or the scooter is heavily strained because of exces-
sive loads or steep inclines, the main circuit breaker may trip to protect the motor and electronics from damage.
See figure6.
n The main circuit breaker reset button pops out when the breaker trips.
n When the breaker trips, the entire electrical system of your scooter shuts down.
n Allow a minute or two for the electronics to “rest.”
n Push in the reset button to reset the main circuit breaker.
n If the main circuit breaker trips frequently, you may need to charge your batteries more often.You may also
need to have your authorized Pride Provider perform a load test on your batteries.
n If the main circuit breaker trips repeatedly, see your authorized Pride Provider for service.
Manual Freewheel Lever
Whenever you need or want to push your scooter for short distances, you can put it in freewheel mode.
n The manual freewheel lever is located on the end of the motor/transaxle assembly at the right rear of the
scooter. See figure 6.
n Remove the key from the key switch
Sundancer
19
Download from Www.Somanuals.com. All Manuals Search And Download.
V . Y O U R S C O O T E R
n Push down on the manual freewheel lever to disable the drive system and the brake system.
n You may now push the scooter.
n Pull up on the manual freewheel lever to reengage the drive and the brake systems and take your scooter out of
freewheel mode.
NOTE: If the scooter is placed in freewheel mode (manual freewheel lever pushed down) while the key
is in the on position, the scooter will not run until the manual freewheel lever is pulled up and the key
is turned to the off position, then back to the on position.
WARNING! When your scooter is in freewheel mode, the braking system is disengaged.
n Disengage the drive motors only on a level surface.
n Ensure the key is removed from the key switch.
n Stand behind the scooter to engage or disengage freewheel mode. Never sit on a
scooter to do this.
n After you have finished pushing your scooter, always return it to the drive mode to lock
the brakes.
Batteries (not shown)
The batteries store electrical energy that powers your Sundancer. See VI. “Batteries and Charging.”
Anti-Tip Wheels
The anti-tip wheels are an integral and important safety feature of your Sundancer. Do not, under any circum-
stances, remove the anti-tip wheels from your Sundancer. See figure 6.
WARNING! Do not remove the anti-tip wheels or modify your scooter in any way that is not
authorized by Pride.
Motor/Transaxle Assembly
The motor/transaxle assembly is an electromechanical unit that converts electrical energy from your Sundancer’s
batteries into the controlled mechanical energy that drives the Sundancer’s wheels.
20
Sundancer
Download from Www.Somanuals.com. All Manuals Search And Download.
V I . B A T T E R I E S A N D C H A R G I N G
Your scooter requires two sealed, maintenance free, 12-volt, 32AH bat-
teries.
Red Yellow Green
n Charge the batteries prior to using your scooter for the first time.
n Keep the batteries fully charged to keep your scooter running
smoothly.
READING YOUR BATTERY VOLTAGE
The battery condition meter on the tiller console indicates the approximate
strength of your batteries using a color code. See figure 7. Green indicates
fully charged batteries, yellow indicates a draining charge, and red indi-
cates that an immediate recharge is necessary.To check the charge, you
must first unplug the charger power cord and power up your scooter. To
ensure the highest accuracy, the battery condition meter should be checked
while operating your scooter at full speed on a dry, level surface.
Figure 7. Battery Condition Meter
You can also check the charge using the ammeter located on the rear of the
scooter. The charger power cord must be plugged into a standard wall
outlet in order to obtain a reading. When the amperage reading is at or near
zero amps, the battery charging is complete. See figure 8.
CHARGING YOUR BATTERIES
Follow these easy steps to charge your batteries safely:
Figure 8. Ammeter Indicates
Battery Is Fully Charged
PROHIBITED! Never use an extension cord to plug in your battery charger. Plug the charger
directly into a properly wired standard wall outlet.
PROHIBITED! Removal of the grounding prong can create an electrical hazard. If necessary
properly install an approved 3-pronged adaptor to an electrical outlet having 2-pronged
plug access. Failure to heed could result in personal injury and or property damage.
WARNING! Ensure that both ends of the charger power cord are clean and dry before
plugging it into the charger power cord receptacle or a wall socket.
1. Position your scooter close to a standard wall outlet.
2. Remove the key from the key switch.
3. Make certain that the manual freewheel lever is in the drive (up) position.
4. Plug the charger power cord into the charger power cord receptacle.
5. Extend the charger power cord and plug it into the wall outlet. It is recommended that you charge your
batteries for 8 to 14 hours.
6. When the batteries are fully charged, unplug the charger power cord from the wall outlet and then from the
charger power cord receptacle.
NOTE: There is a charger inhibit function on your scooter. The scooter will not run and the battery
condition meter will not operate while the batteries are charging.
Sundancer
21
Download from Www.Somanuals.com. All Manuals Search And Download.
V I . B A T T E R I E S A N D C H A R G I N G
BATTERIES AND CHARGING-FREQUENTLY ASKED QUESTIONS (FAQS)
How does the charger work?
When your scooter’s battery voltage is low, the charger works harder and sends more electrical current to the
batteries to bring up their charge.As the voltage of the batteries approaches a full charge, the charger sends less
and less electrical current to the batteries. When the batteries are fully charged, the current sent to them from the
charger is at nearly zero amperage. Therefore, when the charger is plugged in, it maintains the charge on your
scooter’s batteries, but does not overcharge them. We do not recommend that you charge your scooter’s batteries
for more than 24 consecutive hours.
What if the scooter’s batteries won’t charge?
n Be sure the battery cables are connected properly.
n Ensure both ends of the charger cord are inserted fully.
Can I use a different charger?
For the safest, most efficient and balanced charging of your scooter’s batteries, we prefer and highly recommend
the simultaneous charging of both batteries by use of the onboard battery charger.
How often must I charge the batteries?
Two major factors must be considered when deciding how often to charge your scooter’s batteries:
n All day scooter use on a daily basis.
n Infrequent or sporadic scooter use.
With these considerations in mind, you can determine just how often and for how long you should charge your
scooter’s batteries. The onboard charger was designed so that it will not overcharge your scooter’s batteries.
However, you may encounter some problems if you do not charge your batteries often enough and if you do not
charge them on a regular basis. Following the five guidelines below will provide safe and reliable battery operation
and charging.
n If you use your scooter daily, charge its batteries as soon as you finish using it for the day.Your scooter will be
ready each morning to give you a “full day” of service. We recommend that you charge your scooters’s
batteries for 8 to 14 hours after daily use.
n If you use your scooter once a week or less, charge its batteries at least once a week for 12 to 14 hours at a
time.
n Keep your scooter’s batteries fully charged.
n Avoid deeply discharging your scooter’s batteries.
n Do not charge your scooter’s batteries for more than 24 consecutive hours.
22
Sundancer
Download from Www.Somanuals.com. All Manuals Search And Download.
V I . B A T T E R I E S A N D C H A R G I N G
How can I get maximum range or distance per charge?
Rarely will you have ideal driving conditions—smooth, flat, hard driving surfaces with no wind or curves.You will
often face hills, sidewalk cracks, uneven and loosely packed surfaces, curves, and wind.All of these driving conditions
affect the distance or running time per battery charge. Below are a few suggestions for obtaining the maximum range
per battery charge.
n Always fully charge your scooter’s batteries prior to your daily use.
n Maintainproperpressureinallofyourscooter’stires(ifequippedwithpneumatictires).
n Plan your route ahead to avoid as many hills, cracked, broken, or soft surfaces as possible.
n Limit your baggage weight to essential items.
n Try to maintain an even speed while your scooter is in motion.
n Avoid stop-and-go driving.
What type and size of battery should I use?
We recommend deep-cycle batteries that are sealed and maintenance free. BothAGM and Gel-Cell are deep-cycle
batteries that are similar in performance. Do not use wet-cell batteries, which have removable caps.
NOTE: Sealed batteries are not serviceable. Do not remove the caps.
WARNING! Corrosive chemicals contained in batteries. Use onlyAGM or Gel-Cell batteries
to reduce the risk of leakage or explosive conditions.
How do I change a battery in my scooter?
WARNING! Battery posts, terminals, and related accessories contain lead and lead
compounds. Wash hands after handling.
1. Remove the seat and the rear shroud. See IX. “Disassembly andAssembly.”
2. Disconnect the battery strap.
3. Disconnect the battery harness. See figure 14.
4. Disconnect the battery cables from the battery terminals.
5. Remove the old battery.
6. Place a new battery in the battery well.
7. Connect the red battery cable to the positive (+) battery terminal.
8. Connect the black battery cable to the negative (-) battery terminal.
9. Reconnect the battery harness to the rear electronics module.
10. Reconnect the battery strap.
11. Reinstall the rear shroud and seat.
NOTE: If you encounter a damaged or cracked battery, immediately enclose it in a plastic bag and call
your authorized Pride Provider for instructions on disposal. Your authorized Pride Provider will also
have the necessary information on battery recycling, which is our recommended course of action.
Why do my new batteries seem weak?
Deep-cycle batteries employ a different chemical technology than that used in car batteries, nickel-cadmium batteries
(nicads), or in other common battery types. Deep-cycle batteries are specifically designed to provide power, drain
down their charge, and then accept a relatively quick recharge.
Sundancer
23
Download from Www.Somanuals.com. All Manuals Search And Download.
V I . B A T T E R I E S A N D C H A R G I N G
Weworkcloselywithourbatterymanufacturertoprovidebatteriesthatbestsuityourscooter’sspecificelectrical
demands. Fresh batteries arrive daily at Pride and are shipped fully charged to our customers. During shipping, the
batteries may encounter temperature extremes that may influence their initial performance. Heat diminishes the
charge on the battery; cold slows the available power and extends the time needed to recharge the battery.
It may take a few days for the temperature of your scooter’s batteries to stabilize and adjust to their new room or
ambient temperature. More importantly, it takes a few charging cycles (a partial drain followed by a full recharge) to
establishthecriticalchemicalbalancethatisessentialtoadeep-cyclebattery’speakperformanceandlonglife.
Please follow these steps to properly break in your scooter’s new batteries for maximum efficiency and service life.
1. Fully recharge any new battery prior to its initial use. This charging cycle brings the battery up to about 88% of
its peak performance level.
2. Operate your new scooter in familiar and safe areas. Drive slowly at first, and do not travel too far from your
home or familiar surroundings until you have become accustomed to your scooter’s controls and have properly
broken in your scooter’s batteries.
3. Fully recharge the batteries. They should be at over 90% of their peak performance level.
4. Operate your scooter again.
5. Fully recharge the batteries again.
6. After four or five charging cycles, the batteries are able to receive a charge of 100% of their peak performance
level and are able to last for an extended period of time.
How can I ensure maximum battery life?
Fully charged deep-cyclebatteriesprovidereliableperformanceandextendedbatterylife. Keepyourscooter’s
batteries fully charged whenever possible. Batteries that are regularly and deeply discharged, infrequently charged,
or stored without a full charge may be permanently damaged, causing unreliable performance and limited service life.
What about public transportation?
If you intend to use public transportation while using your scooter, you must contact in advance the transportation
provider to determine their specific requirements.
24
Sundancer
Download from Www.Somanuals.com. All Manuals Search And Download.
V I I . O P E R A T I O N
BEFORE GETTING ON YOUR SCOOTER
n Have you fully charged the batteries? See VI. “Batteries and Charging.”
n Is the manual freewheel lever in the drive (up) position? Never leave the scooter in freewheel mode unless you
are manually pushing your scooter.
GETTING ONTO YOUR SCOOTER
WARNING! Never attempt to get onto or off of your scooter without first removing the key
from the key switch. This will prevent the scooter from moving if accidental throttle control
lever contact is made.
1. Make certain that the key is removed from the key switch.
2. Stand at the side of your scooter.
3. Pull up on the seat lock lever and rotate the seat until it is facing you.
4. Make certain that the seat is locked securely in position.
5. Position yourself comfortably and securely in the seat.
6. Pull up on the seat lock lever and rotate the seat until you are facing forward.
7. Make certain that the seat is locked securely in position.
8. Make certain that your feet are safely on the floorboard.
PRE-RIDE ADJUSTMENTS AND CHECKS
n Is the seat at a comfortable driving height?
n Is the seat locked securely in place?
n Is the tiller at a comfortable setting and locked securely in place? See VIII. “ComfortAdjustments.”
n Is the key fully inserted into the key switch and turned clockwise to the “on” position? See V. “Your Scooter.”
n Does the scooter’s horn work properly?
n Is your proposed path clear of people, pets, and obstacles?
n Have you planned your route to avoid adverse terrain and as many inclines as possible?
OPERATING YOUR SCOOTER
WARNING! The following can adversely affect steering and stability while operating your
scooter:
n Holding onto or attaching a leash to walk your pet
n Carrying passengers (including pets)
n Hanging any article from the tiller
n Towing or being pushed by another motorized vehicle
Such practices could cause loss of control and/or tipping resulting in personal injury and/
or damage to your scooter.
Keep both hands on the tiller and your feet on the floorboard at all times while operating your scooter.This driving
position gives you the most control over your vehicle.
n Set the speed adjustment dial to your desired speed.
n Press your thumb against the appropriate side of the throttle control lever.
n The electromechanical disc park brake automatically disengages and the scooter accelerates smoothly to the
speed you preselected with the speed adjustment dial.
n Pull on the left handgrip to steer your scooter to the left.
Sundancer
25
Download from Www.Somanuals.com. All Manuals Search And Download.
V I I . O P E R A T I O N
n Pull on the right handgrip to steer your scooter to the right.
n Move the tiller to the center position to drive straight ahead.
n To stop, slowly release the throttle control lever. The electronic brakes will automatically engage when your
scooter comes to a stop.
NOTE: Your scooter’s reverse speed is slower than that of the forward speed you preset with the speed
adjustment dial.
GETTING OFF OF YOUR SCOOTER
1. Bring your scooter to a complete stop.
2. Remove the key from the key switch.
3. Pull up on the seat lock lever and rotate the seat until you are facing toward the side of your scooter.
4. Make certain that the seat is locked securely in position.
5. Carefully and safely get out of the seat and stand to the side of your scooter.
6. You can leave the seat facing to the side to facilitate boarding your scooter next time.
POWER DOWN TIMER FEATURE
Your scooter is equipped with an energy saving auto power down timer feature designed to preserve your scooter’s
battery life. If you mistakenly leave the key in the key switch and in the “on” position but do not use your scooter
for approximately 20 minutes, the scooters controller shuts down automatically.Although the controller is shut
down, power will still be supplied to the scooters lighting system.
If the power down timer feature takes effect, perform the following steps to resume normal operation.
1. Turn the key to the “off” position.
2. Turn the key back to the “on” position.
26
Sundancer
Download from Www.Somanuals.com. All Manuals Search And Download.
V I I I . C O M F O R T A D J U S T M E N T S
WARNING! Remove the key from the key switch before adjusting the tiller or the seat.
Never attempt to adjust the tiller or the seat while the scooter is in motion.
TILLER ANGLE ADJUSTMENT
Your scooter is equipped with a pivoting tiller that allows adjustment
to 4 positions from the scooter deck to the farthest forward stop.
1. Lift the tiller adjustment lever. See figure 9.
2. Move the tiller to a comfortable position.
3. Release the tiller adjustment lever to secure the tiller in position.
Lowering The Tiller To The Scooter Deck
NOTE: In order to lower the tiller to the scooter deck, you
must first remove the seat and batteries. See IX. “Disassembly
and Assembly.”
TILLER ADJUSTMENT LEVER
Figure 9. Tiller Adjustment
1. Turn the tiller to the right so that, when lowered, it will be to the
left of the seat post. See figure 9A.
WARNING! Do not attempt to forcefully lower
the tiller if it is not in the proper lowering
position. Excessive force can possibly damage
the tiller adjusting mechanism.
2. Pull up on the tiller adjustment lever and lower the tiller slowly
toward the scooter deck. See figure 9B.
NOTE: When the tiller is past the last locking stop, you can
release the tiller adjustment lever. The tiller will not stop
again until it reaches its lowest point.
Figure 9A. Lowering The Tiller
When the tiller reaches its lowest point, you will hear a positive
click. The tiller is now locked.
Raising The Tiller From The Scooter Deck
In order to raise the tiller from the scooter deck, you must lift up on
the tiller adjustment lever to unlock the tiller. Continue to hold the
tiller adjustment lever up until the tiller reaches the position you
desire. Be sure the tiller locks into place.
SEAT ROTATION
The seat lock lever locks the seat in one of four positions.
1. Pull up on the seat lock lever to unlock the seat. See figure 10.
2. Rotate the seat to the desired position.
Figure 9B. Lowest Tiller Position
3. Release the seat lock lever to lock the seat securely in place.
Sundancer
27
Download from Www.Somanuals.com. All Manuals Search And Download.
V I I I . C O M F O R T A D J U S T M E N T S
ARMREST ADJUSTMENT KNOBS
FRONT-TO-BACK SEAT ADJUSTMENT
You can reposition the scooter’s seat forward or rear-
ward to one of three settings thereby adjusting the dis-
tance between the seat and the tiller.
1. Remove the seat from your scooter.
2. Remove the four bolts that fasten the seat to the seat
platform. See figure 10.
3. Align the seat platform with the desired set of holes
BOLTS
on the seat.
4. Replace and tighten the four bolts securely.
ARMREST WIDTH ADJUSTMENT
The scooter armrest width can be adjusted inward or out-
ward.
SEAT LOCK LEVER
1. Loosen the armrest adjustment knobs at the back of
the seat frame. See figure 10.
Figure 10. Seat Adjustments
2. Slide the armrests in or out to the desired width.
3. Tighten the armrest adjustment knobs as required.
The armrests can also be lifted upward to aid in getting
onto and off of your scooter.
SEAT HEIGHT ADJUSTMENT (POWER SEAT POST)
Your scooter may be equipped with a power seat. The power seat actuator is designed to raise or lower the seat
with minimal effort on the part of the operator.
WARNING! The power seat is intended for operation only while your scooter is stationary
and on a level surface. Its purpose is to aid you in reaching objects.
Failure to comply with the following instructions, warnings, and safety rules for power
seat use could result in serious personal injury and damage to your scooter.
Operating your power seat:
1. Release the throttle control lever and allow the scooter to come to a complete stop.
2. Ensure that your scooter is level and stationary.
3. Set the speed adjustment dial to the slowest setting.
4. Toggle the power seat switch located on the tiller console to the “on” position.
5. To raise the power seat, operate your throttle control lever in the forward direction.
6. Release the throttle control lever when you have attained your desired height.
7. To lower the power seat, operate your throttle control lever in the reverse direction.
8. Ensure that your seat is in the lowest position and that you have fully released the throttle control lever.
9. Toggle “off” the power seat switch before you attempt to drive your scooter again.
NOTE: Frequent use of the power seat will more rapidly drain the charge of the batteries.
28
Sundancer
Download from Www.Somanuals.com. All Manuals Search And Download.
V I I I . C O M F O R T A D J U S T M E N T S
WARNING! Strict adherence to the following safety rules is vital to your safety:
n Do not switch the scooter’s power off while activating the throttle control lever or
immediately after release.
n Operate the power seat only while completely stationary on level ground.
n Do not attempt to operate the power seat switch with the throttle control lever
depressed.
n Do not operate your scooter with the power seat elevated.
n Never place your scooter in freewheel mode with the power seat elevated.
n Use extreme caution when reaching for objects with your power seat elevated. Do not
overextend or attempt to pick up objects that might affect your balance.
n Do not attempt to raise or lower the seat while in motion!
n Do not drive your scooter unless the power seat is fully retracted (in the lowest position).
Sundancer
29
Download from Www.Somanuals.com. All Manuals Search And Download.
I X . DISASSEMBLY AND ASSEMBLY
DISASSEMBLY
You can disassemble the scooter into seven pieces: the
seat, the front section, the rear section, the rear shroud,
the basket, and the batteries. No tools are required to
disassemble or assemble your scooter, but keep in mind
that the disassembled sections of the scooter take up
more floor space than the assembled unit. Always
disassemble or assemble your scooter on a level, dry
surface with sufficient room for you to work and move
around your scooter—about 5 feet in all directions.
Remember that some scooter components are heavy and
you may need assistance when lifting them.
SEAT LOCK LEVER
Figure 11. Seat Removal
WARNING! Lifting weight beyond
your physical capability may result
in personal injury. Ask for assistance
when necessary while disassembling
or assembling your scooter.
1. Place the manual freewheel lever in the drive (up)
position.
2. Coil the charger power cord and store it for future
use.
ç
ç
3. Pull up on the seat lock lever and lift the seat straight
up and off the scooter. See figure 11.
4. Gently pull the shroud away from the frame and lift it
off of the scooter. See figure 12.
5. Disconnect the battery straps.
6. Unplug both black and white 2-pin battery harnesses.
See figure 13.
Figure 12. Rear Shroud Removal
7. Unplug the front-to-rear harness that connects the
tiller console to the rear electronics module. See figure
BATTERY STRAPS
14.
WARNING! Failure to unplug both
battery harnesses and the front-to-
rear harness prior to separating the
front and rear sections could result
in permanent damage to the scooter.
BATTERY HARNESSES
Figure 13. Battery Harnesses
30
Sundancer
Download from Www.Somanuals.com. All Manuals Search And Download.
I X . D I S A S S E M B LY A N D A S S E M B LY
8. Lift both batteries off the scooter.
9. Remove the detent pin that secures the front and
rear sections together. See figure 15.
10. Completely lower the tiller to the center of the scooter
deck. See VIII. “ComfortAdjustments.”
NOTE: Steer the tiller to the right before lowering
it. The tiller will sit slightly to the left when fully
lowered.
11. Pull up on the handhold (located on the front sec-
tion) and push back on the seat post, then gently
separate the sections of the scooter. See figure 16.
Figure 14. Front-To-Rear Harness
DETENT PIN
Figure 15. Detent Pin Removal
HANDHOLD
Figure 16. Frame Separation
Sundancer
31
Download from Www.Somanuals.com. All Manuals Search And Download.
I X . D I S A S S E M B LY A N D A S S E M B LY
ASSEMBLY
1. Place the manual freewheel lever in the drive (up) position.
2. Position the front and rear sections of your scooter as shown in figure 17.
WARNING! Position the front-to-rear harness cable so it will not become pinched between
the frame halves when pivoting the rear section forward.
3. Align the lower slots on the rear of the front section with the corresponding pegs on the front of the rear section.
See figure 18.
4. Gently lift uponthe seat post on the rear section of your scooter, so the rear section pivots into place.
5. Secure the front and rear sections with the ball detent pin.
6. Raise the tiller
7. Plug the front-to-rear harness into the mating plug found on the rear electronics module.
8. Put the batteries in place and plug the black and white 2-pin battery harnesses into the rear electronics module.
9. Reconnect the battery straps.
10. Gently place the rear shroud over the seat post.
11. Lower the shroud into place.
12. Carefully lift the seat and slide the seat platform post (on the seat bottom) into the seat pedestal.
13. Rotate the seat until it locks into place.
FRONT-TO REAR HARNESS
CABLE
Figure 17. Frame Positioning
Figure 18. Connecting The Frame Halves
32
Sundancer
Download from Www.Somanuals.com. All Manuals Search And Download.
X . B A S I C T R O U B L E S H O O T I N G
Any electromechanical device occasionally requires some troubleshooting. However, most of the problems that
may arise can usually be solved with a bit of thought and common sense. Many of these problems occur because
the batteries are not fully charged or because the batteries are worn down and can no longer hold a charge.
DIAGNOSTIC FLASH CODES
The diagnostic flash codes for your scooter are designed to help you perform basic troubleshooting quickly and
easily.A diagnostic flash code will flash from the status LED in the event one of the conditions listed below
develops.
NOTE: Your scooter will not run unless the flash code condition is resolved and the scooter has been
turned off, then turned back on.
FLASH CODE
CONDITION
Batteries are too low to operate the
SOLUTION
Charge batteries or unplug the charger power
scooter or the charger is operating.
cord from the electrical outlet.
Shut down your scooter for a minimum of
several minutes to allow the controller to
cool.
Controller is hot; the scooter seems to
be losing power.
Wigwag fault; your throttle control
lever is not responding.
Call your authorized Pride Provider for
assistance.
Turn the scooter key to the off position, then
pull the manual freewheel lever to the (up)
drive position, and restart your scooter.
Unplug the charger power cord from the
charger power cord receptacle.
The manual freewheel lever is in the
(down) freewheel position.
Scooter is operating with the charger
attached.
What if all the systems on my scooter seem to be “dead”?
n Make certain that the key is in the “on” position.
n Check that the batteries are fully charged. See VI. “Batteries and Charging.”
n Push in the main circuit breaker reset button. See V. “Your Scooter.”
n Make certain that both battery harnesses are firmly connected to the rear electronics module and to the battery
terminals. See IX. “Disassembly andAssembly.”
n Make sure that the front-to-rear harness is firmly connected to the rear electronics module. See IX. “Disas-
sembly andAssembly.”
n Be sure the power down timer feature has not been activated. See VII “Operation.”
n Check the 5-amp fuse located on the lower portion of the tiller console. See XI. “Care and Maintenance” for
fuse replacement.
What if my scooter does not move when I press the throttle control lever?
n With the key turned to the on position, check the status LED. If the LED flashes three times, pauses, then
flashes two times, this is the manual freewheel lever code and means your scooter is in freewheel mode.
n When the manual freewheel lever is pushed down, the brakes are disengaged and all power to the transaxle is
cut.
n Pull up on the manual freewheel lever, turn the scooter off, and then turn the scooter on, to return to normal
scooter operation.
Sundancer
33
Download from Www.Somanuals.com. All Manuals Search And Download.
X . B A S I C T R O U B L E S H O O T I N G
What if the main circuit breaker repeatedly trips?
n Charge the scooter’s batteries more frequently. See VI. “Batteries and Charging.”
n If the problem continues, have both of your scooter’s batteries load tested by your authorized Pride Provider.
n You may also perform the load test yourself. Battery load testers are available at most automotive parts stores.
n Follow the directions supplied with the load tester.
n See VI. “Batteries and Charging” or IV. “Specifications” for information about your scooter’s battery type.
What if the battery condition meter dips way down and the motor surges or hesitates when the throttle
control lever is pressed? (See V. “Your Scooter.”)
n Fully charge your scooter’s batteries. See VI. “Batteries and Charging.”
n Have your authorized Pride Provider load test each battery.
n Or, see the previous troubleshooting question for load testing the batteries yourself.
If you experience any problems with your scooter that you are not able to solve, immediately contact your authorized
Pride Provider for information, maintenance, and service.
34
Sundancer
Download from Www.Somanuals.com. All Manuals Search And Download.
X I . C A R E A N D M A I N T E N A N C E
Your scooter requires a minimal amount of care and maintenance. If you do not feel confident in your ability to
perform the maintenance listed below, you may schedule inspection and maintenance at your authorized Pride
Provider.The following areas require periodic inspection and/or care and maintenance.
TIRE PRESSURE
n If equipped with pneumatic tires, always maintain a proper 30-35 psi tire pressure.
WARNING! It is important that 30-35 psi tire pressure be maintained in pneumatic tires at
all times. Do not underinflate or overinflate your tires. Low pressure may result in loss of
control, and overinflated tires may burst. Failure to maintain 30-35 psi tire pressure in
pneumatic tires at all times may result in tire and/or wheel failure, causing serious personal
injury and/or damage to your scooter.
n Regularly inspect your scooter’s tires for signs of wear.
EXTERIOR SURFACES
Bumpers, tires, and trim can benefit from an occasional application of rubber or vinyl conditioner.
WARNING! Do not use a rubber or vinyl conditioner on the scooter’s vinyl seat or tire tread.
They will become dangerously slippery and result in personal injury and/or damage to your
scooter.
BATTERY TERMINAL CONNECTIONS
n Make certain that the terminal connections remain tight and uncorroded.
n The batteries must sit flat in the battery wells.
n The battery terminals should face the rear of the scooter.
WIRING HARNESSES
n Regularly check all wiring connections.
n Regularly check all wiring insulation, including the charger power cord, for wear or damage.
n Have your authorized Pride Provider repair or replace any damaged connector, connection, or insulation that
you find before using your scooter again.
ABS PLASTIC SHROUDS
n The front tiller shroud, front shroud, and the rear shroud are formed from durableABS plastic and are coated
with an advanced formula urethane paint.
n A light application of car wax will help the shrouds retain their high gloss.
AXLE BEARINGS AND THE MOTOR/TRANSAXLE ASSEMBLY
These items are all prelubricated, sealed, and require no subsequent lubrication.
MOTOR BRUSHES
The motor brushes are housed inside of the motor transaxle/assembly.They should be inspected periodically for
wear by your authorized Pride Provider.
Sundancer
35
Download from Www.Somanuals.com. All Manuals Search And Download.
X I . C A R E A N D M A I N T E N A N C E
CONSOLE, CHARGER, AND REAR ELECTRONICS
n Keep these areas free of moisture.
n Allow these areas to dry thoroughly if they have been exposed to moisture before operating your scooter again.
FUSE REPLACEMENT
In the event a fuse should cease to work:
n Remove the fuse by pulling it out of its slot.
n Examine the fuse to be sure it is blown. See figures 20 and 21.
n Insert a new fuse of the proper rating.
Figure 21. Blown Fuse (Replace)
Figure 20. Working Fuse
WARNING! The replacement fuse must exactly match the rating of the new fuse. Failure
to use properly rated fuses may cause damage to the electrical system and may result in
personal injury.
LIGHT BULB REPLACEMENT
Light bulbs for the scooter are easily replaceable.
NOTE: Only use 24-volt light bulbs.
n Remove the light cover.
n Gently remove the bulb by pulling it straight out.
n Insert a new 24V, 5-watt bulb.
n Replace the light cover.
NOTE: Replacement light bulbs can be purchased from your authorized Pride Provider.
STORING YOUR SCOOTER
If you plan on not using your scooter for an extended period of time, it is best to:
n Fully charge its batteries prior to storage.
n Disconnect both battery harnesses.
n Store your scooter in a warm, dry environment.
n Avoid storing your scooter where it will be exposed to temperature extremes.
WARNING! Always protect batteries from freezing temperatures and never charge a frozen
battery. This damages the battery and can cause personal injury.
For prolonged storage, you may wish to place several boards under the frame of your scooter to raise it off of the
ground. This takes the weight off the tires and reduces the possibility of flat spots developing on the areas of the
tires contacting the ground.
36
Sundancer
Download from Www.Somanuals.com. All Manuals Search And Download.
X I I . W A R R A N T Y
THREE-YEAR LIMITED WARRANTY
For three (3) years from the date of purchase, Pride will repair or replace at our option to the original purchaser,
free of charge, any of the following parts found upon examination by an authorized representative of Pride to be
defective in material and/or workmanship:
Structural frame components, including:
n Main Frame
n Fork
n Seat Post
nTiller Frame
THREE-YEAR PRORATA WARRANTY
Three-year prorata drivetrain warranty, including:
nTransaxle
nMotor Brake (electronic function ONLY) nBrake
These components will be prorated on the following schedule:
nFirst year: 100% replacement of parts cost
nSecond year: 67% replacement of parts cost
nThird year: 50% replacement of parts cost
NOTE: If there is an increase in the operational noise level in the transaxle, the warranty does not
apply. An increase in operational noise level usually occurs due to abusive and excessive strain on the
scooter.
ONE-YEAR LIMITED WARRANTY
For one (1) year from the date of purchase, Pride will repair or replace at our option to the original purchaser, free
of charge, any of the following parts found upon examination by an authorized representative of Pride to be
defective in material and/or workmanship:
n Bearings
nBushings
n Rubber Components
nPlastic components except body
Also, electronic assemblies including:
n Electronic Controllers
n Harnesses
nChargers
nAny other electrical subassembly
SIX-MONTH WARRANTY
The battery is covered by a separate six-month warranty, provided by the battery manufacturer.The batteries are
not warranted by Pride.
RECONDITIONED UNITS WARRANTY
All reconditioned units are covered by a six-month warranty from Pride effective from the date of purchase.
WARRANTY EXCLUSIONS
This warranty does not extend to those items which may require replacement due to normal wear and tear.
n ABS Plastic shrouds nMotor brushes
nUpholstery and seating
n Brake Pads
nTires and tubes
nFuses/Bulbs
Sundancer
37
Download from Www.Somanuals.com. All Manuals Search And Download.
X I I . W A R R A N T Y
n Circumstances beyond the control of Pride
n Labor, service calls, shipping, and other charges incurred for repair of the product, unless specifically autho-
rized, INADVANCE, by Pride Mobility Products Corporation
n Repairs and/or modifications made to any part without specific consent from Pride
Exclusions also include components with damage caused by:
n Contamination
n Abuse, misuse, accident, or negligence
n Battery fluid spillage or leakage
n Commercial use, or use other than normal
n Improper operation, maintenance, or storage
NOTE: Gradual deterioration in performance because the battery has been left in a discharged state,
left in cold conditions for an extended period of time, or worn out through heavy use is not covered.
SERVICE CHECKS AND WARRANTY SERVICE
Warranty service must be performed by an authorized Pride Provider. Do not return faulty parts to Pride without
prior written authorization.All transportation costs and shipping damage incurred while submitting parts for repair
or replacement are the responsibility of the purchaser. Please contact your authorized Pride Provider for informa-
tion on the current cost associated with a service visit.
There is no other express warranty.
IMPLIED WARRANTIES
Implied warranties, including those of merchantability and fitness for a particular purpose, are limited to one (1)
year from the date of original purchase and to the extent permitted by law.Any and all implied warranties are
excluded. This is the exclusive remedy. Liabilities for consequential damages under any and all warranties are
excluded.
Some states do not allow limitations on how long an implied warranty lasts or do not allow the exclusion of
limitation of incidental or consequential damages. So, the above limitation or exclusion may not apply to you.
Download from Www.Somanuals.com. All Manuals Search And Download.
182 SusquehannaAve.
Exeter, PA 18643
1-800-800-8586
Download from Www.Somanuals.com. All Manuals Search And Download.
|