User Guide
Version 1.8 | Release Date (December 2014) | 3725-69804-004/A
Polycom® RealPresence® Capture
Server, Virtual Edition
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
System Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Capacity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
RealPresence Capture Server and External Stream Servers . . . . . . . . . . . . . . . . . . . . . . 10
Multi-user Login Capacity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Local Media Storage Capacity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
User Interfaces . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Web-based Admin Portal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
User Permissions through Admin Portal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Web-based User Portal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Search and Refresh Lists . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
TV user interface (also called the “TVUI”) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Understand the Main Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Console . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Hardware Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Hardware Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Software Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Software Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Resource and License Management . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Web Browser and OS Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Set up RealPresence Capture Server in a Virtual Environment . . . . . . . . . . . . . . . . . . . . . . . 18
Configure NFS (Required) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Product Activation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Obtain the Product Activation Key from Polycom . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Activate Product and Check the Activation Status . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
System Initialization . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Configure IP Settings through Console . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Configure IP Settings through Admin Portal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Configure the IP Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
System Administration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Check System Status on Home . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Polycom, Inc.
iii
Download from Www.Somanuals.com. All Manuals Search And Download.
Signaling Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
System Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
System Alerts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Signaling Server Status . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Hardware Status . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Web Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
External Server Status . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Manage Users and Groups . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
User Roles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Add a New User . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Modify User Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Create and Manage Groups . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Set Recording Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Configure Signalling Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
SIP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Configure Port Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Set the System Time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Configure Media Storage Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Configure Multicast Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Before You Start . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Configure Multicast . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Multicast . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Multicast of a Live Streaming . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Install the Certificate in the System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Install a Certificate Authority’s Certificate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Create a Certificate Signing Request . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
View Certificate Details . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Remove a Certificate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Client Certification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Use OCSP to Obtain Revocation Status . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Configure QoS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Configure SNMP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Notice about Using Polycom SNMP MIB Files . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Diagnostics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Password Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
UI Customization . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
Customize IVR Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Customizing UI Logo . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Setup E-mail . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Portal Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Polycom, Inc.
iv
Download from Www.Somanuals.com. All Manuals Search And Download.
Record and Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
Configure Templates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
Configure Recording Templates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
Configure Transcoding Template . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
Configure VRRs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
Start a Recording . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
Point-to-point Recording . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
Dial in from Endpoint . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
Record from RMX via Recording Link . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
Change Conference Layout for MCU hosted calls . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
Dial into a VRR to Start Recording . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
Play Back Media Archives . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
Quick Code . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
Live Streaming/VoD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
Streaming Using Capture Server . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
Streaming Using External Servers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
Live Streaming . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
Start Live Streaming . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68
Multi Live Streaming . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68
View Live Streaming Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68
View Live Streaming Video . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68
Media Management . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
Manage Archives . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
View Archive Details . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
Play Back and Download Archives . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
Modify Archives . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73
Dynamic Archiving . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73
Transcoding . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74
Fault Management . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76
System Log Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76
Configure Log Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76
Log Management . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
Restart and Shut Down the System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
Upgrade, Backup, Restore, and Migrate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80
System Upgrade and Downgrade . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80
Backup and Restore . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81
Polycom, Inc.
v
Download from Www.Somanuals.com. All Manuals Search And Download.
Back Up and Restore Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81
Configure an FTP Server for Backup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82
Back Up and Restore Archives . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82
Manage Archives and Live Streams Using the User Portal . . . . . . . . . . . . . . . . 84
Manage Archives and Live Streams Using the User Portal . . . . . . . . . . . . . . . . . . . . . . . . . . . 85
View Live Streams . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86
Appendix A – Console Commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87
Login Console . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87
Console Command Descriptions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88
Help . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88
Exit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88
Viewing Device Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88
Reboot Device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88
Power off System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89
Reset Password . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89
Reset Admin Password . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89
Restore System Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89
Check Disk Space Usage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89
Ping . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90
Network Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90
Appendix B – Configure External Servers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92
Live Stream Meetings to an External Media Server . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92
Configure the Wowza Media Server . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93
Configure the IIS Media Server . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95
Configuring the Windows Media Server . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99
View the Streaming through External Media Server . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100
Appendix C – Configure the Server Working with VCS . . . . . . . . . . . . . . . . . . 102
Configure VCS Calling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102
Configure VCS for SIP Calling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102
Polycom, Inc.
vi
Download from Www.Somanuals.com. All Manuals Search And Download.
Polycom, Inc.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
System Overview
The Polycom® RealPresence Capture Server is a streaming and recording system that participates in
standards-based video and telepresence calls that can be used alone or as an integrated component of
Polycom Video Content Management solution. As a native part of the Polycom RealPresence Platform, the
RealPresence Capture Server records, archives, and streams telepresence and video conferences for
playback on a variety of client devices including tablets, smart phones, desktop computers, and
standards-based video endpoints.
The RealPresence Capture Server is typically deployed as part of a larger Polycom RealPresence Platform
solution, but it can be used as a standalone solution or with third-party systems. The Real Presence Capture
Server’s full potential can best be realized when it is integrated with the Polycom RealPresence Media
Manager.
By leveraging RealPresence Capture Server with existing telepresence systems, video conferencing
endpoints and video infrastructure, or familiar unified communications (UC) tools, your organization can
easily convert real-time conferences and events into reusable multimedia assets. Following are some
features of RealPresence Capture Server:
● It integrates with Polycom endpoints, conference platforms, and other standards-based video
endpoints for automated recording and playback.
● It supports H.323 and SIP standards for interoperability with third-party conferencing systems.
● It is available with several licenses that control the number of video calls that can be recorded, and
of those calls, the number of calls that can be streamed live for viewing on web browsers.
● It can output a maximum stream (live or video on demand) of 1080p HD (people+content combined)
● It provides access to live and video call archive streams on devices with compatible browsers
including PC, MAC, iOS, and Android devices.
● It enables you to access video call archives via any standard-based endpoint.
● It provides REST API support for third-party integrations.
Polycom, Inc.
1
Download from Www.Somanuals.com. All Manuals Search And Download.
System Overview
Capacity
The license that you buy determines the RealPresence Capture Server capability. The following table shows
the maximum capacity of the RealPresence Capture Server when it performs different features.
RealPresence Capture Server Capacity
Maximum Record Port
Feature
Description
6 port license
Signaling Connection
(H323/SIP)
Specify the maximum number of devices connected to
RealPresence Capture Server simultaneously.
6
Connection type: live streaming recording, recording only,
and playback.
Conference
Recording
Specify the maximum number of conferences that can be
recorded simultaneously.
6
Connection type: recording only.
Single-point
Conference Live
Streaming
Specify the maximum number of single-point conferences
that can be live streamed simultaneously.
3 (720p and 1080p)
Note: The conference being live streamed can also be
recorded.
RealPresence Capture Server Capacity
Capture Server Model
# of Live Ports (720p)
# of Recording/Playback Ports
Recording Only
0
3
6
9
40
Minimum
Medium
6
12
18
Maximum
•
Capture Server 40/0 is not licensed to include live unicast/multicast streaming.
For 40/0 model, P2P and Quick Code playback features are not available since
no live streaming ports are provided. Therefore there is no 1080p live streaming
with the product. This is working as designed.
•
•
Capture Server is conducting multiple functions simultaneously: real time
decoding/encoding, P2P recording, and Quick Code playback all occupy live
streaming ports.
The models are defined/tailored per RSS5000 hardware. Ports are calculated with
a 720p30 baseline profile video plus content.
Polycom, Inc.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
System Overview
Live Streaming Resources Usage
The combination of frame rate, resolution and number of live streaming rates used affects the quantity of
resources required on the RealPresence Capture Server to support live streaming.
On Capture Server, streaming port calculation is used as quantitative indicator of live streaming resources,
one stream (single bitrate) of 720p live streaming costs system resource calculated as one streaming port,
for example, one stream of 1080p live streaming needs two streaming ports.
If multiple bitrates are configured for one live stream, each bitrate is calculated separately.
If WMV is configured as the output format and the layout is set as dual window, then one additional port is
calculated as well for each bitrate.
In addition to live streaming, the following features also use streaming ports:
● Video call playback
● Point-to-point recording
Streaming ports are reserved before calls are connected by call rate in recording template.
If there are not enough streaming ports available in system for one service request, the request will be
rejected. If real call rate is lower than the call rate configured in recording template, the Capture Server
system will update the streaming ports that are really occupied. If system finds that multiple live streams are
at the same rate, it will turn off duplicated live rates to save live streaming resources and occupied streaming
ports will be updated together. If external live media server is configured in the VRR template, system will
not turn off duplicate live rates.
Resource Consumption
Feature
Resources Consumed
Recording/Live Streaming resource
consumed
Resolution
4CIF/SD
720p
Recording Port
Live Streaming Port
1
1
1
1
1
1
1
1
1
0.5
1
Conference Call (or Endpoint Call)
Video Call Playback
1080p
2
4CIF/SD
720p
0.5
1
1080p
2
P2P
4CIF/SD
720p
0.5
1
1080p
2
Polycom, Inc.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
System Overview
RealPresence Capture Server Stand-alone Unicast Live Streaming and
VoD
RealPresence Capture Server base system is licensed for 250 simultaneous viewing of live and VoD
streams from the User Portal. RealPresence Capture Server system supports a maximum number of
simultaneous live, or VoD streams, from the User Portal is 500, with the purchase of a stream upgrade
option.
Number of
Simultaneous
Streams from
Capture Server
User Portal
Upgradeable to
Maximum
Simultaneous
Streams
Stream Rate on
User Portal
License
128 kbps–512 kbps
768 kbps–1728 kbps
2560 kbps
250 streams
125 streams
50 streams
Included with
base system
500
250
100
Included with
base system
Included with
base system
Multi-user Login Capacity
The maximum number of Admin Portal session and User Portal session (including anonymous login) is as
follows:
● Admin Portal Session: 200
● User Portal Session: 3000
Polycom, Inc.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
System Overview
Local Media Storage Capacity
Each 60 minutes 512k call to RealPresence Capture Server requires about 450M storage (the 512k call raw
+ the default mp4 VoD). For 1024k, the storage space is about double, which is 900M. You cannot calculate
an accurate ratio because the size also depends on the video quality.
Storage Usage
Storage Space
(WMV)
Storage Space
(MP4)
Situation
Primary Rate
Call Duration
1*1080p
1024 kbps (MP4)
1728 kbps (WMV)
60 minutes
~1.4 GB
~870 MB
1*1080p
1*720p
1*720p
1*4CIF
1*CIF
4096 kbps
4096 kbps
1024 kbps
512 kbps
128 kbps
60 minutes
60 minutes
60 minutes
60 minutes
60 minutes
~3.2 GB
~3.2 GB
~862 MB
~458 MB
~100 MB
~3.5 GB
~3.5 GB
~860 MB
~459 MB
~103 MB
People Video
Content Video
Call Protocols
H.323, SIP
H.239, BFCP (TCP only)
Audio
G.711, G.722, G.722.1,
G.722.1.C, G.729A,
Siren 14 (Mono, Stereo),
Siren 22 (Mono, Stereo),
Siren LPR,
N/A
Protocols/Codes
Siren LPRStereo
Video Codecs
H.264 BP, H.264 HP,
H.263, H.263+, H.261
H.264 BP, H.264 HP,
H.263, H.263+
Video Resolutions
1080P, 720P, 4CIF, CIF
H.263: XGA (30)
H.264: 720P30
Polycom, Inc.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
System Overview
Approximate Capacity of Polycom Capture Server 1.7 in Hours of Recording
Approx. file
Approx. capacity of
size of 1 hour
@MP4, in MB
(from Admin
Guide)
Approx. number of
hours of
recording/TB of
storage
Capture Server
Appliance Local
storage, in hours
(Capacity=3.5 TB)
Resolution
Call speed (Kbps)
CIF
128,000
103
9,700
2,170
1,160
1,140
280
33,950
7,595
4,060
3,990
980
4CIF/SD
720p30
1080p30
720p30
1080p30
512,000
459
1,024,000
1,024,000
4,096,000
4,096,000
860
870
3,500
3,500
280
980
•
These values are all estimates because file size varies by call speed, video
quality, and amount of motion. File size info from Admin Guide, capacity is per
data sheet.
•
•
Storage capacity can be expanded on appliances by using NAS storage.
Capture Server Virtual Edition uses NAS storage exclusively.
Polycom, Inc.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
User Interfaces
RealPresence Capture Server provides four interfaces that are used for specific purposes: Web-based
Admin Portal, Web-based User Portal, TV User Interface, and Console.
Web-based Admin Portal
This section introduces how to access the web-based Admin Portal and its fundamental layout. You can
access the Admin Portal via a compatible web browser and do the following:
● Configure the system.
● Set up recording parameters.
● Monitor system use and health.
● Dial out to endpoints to record meetings, disconnect calls in progress, and create different transcoded
versions of archived calls.
● Download media files and give admin users a quick way to access and play archives and live
streams.
RealPresence Capture Server system allows up to 200 users with admin rights to log in to the Admin Portal
at the same time.
Polycom now offers a virtual edition of the RealPresence Capture Server system, this edition is packaged
as an Open Virtualization Archive (OVA) file. The OVA file contains the RealPresence Capture Server
application and information about its virtual machine environment. It can be installed as a virtual instance
on a host machine running VMware vSphere.
User Permissions through Admin Portal
You can log in to the Admin Portal as an administrator, an auditor or an user. The following table explains
user permissions.
User Permissions
Content
Auditor
Administrator
User
Accessible
information
System logs
All pages
Archives and live
streaming.
Operation
permissions
View and download system
logs.
View, edit, and
delete
Access archives,
view live
streaming and
make recordings.
Polycom, Inc.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
User Interfaces
To log in to the Admin Portal:
1 In the address line, enter the system’s IP address in this format: https://<system IP address>/admin.
When an IPV6 address is used, refer to the following format:
https://[ipv6]/admin
2 Enter your user name and password to log in to the system.
.
To enhance security, Capture Server has changed the default from http to https.
Request to RealPresence Capture Server system, sent to http://<system IP
Using the HTTPS protocol ensures that the configuration of all login credentials
(such as user names and passwords) are transmitted using an encrypted channel.
This includes those credentials used to communicate with third-party systems on
your network. Using the HTTPS protocol limits the ability of anyone monitoring traffic
on the network to discover these credentials.
Web-based User Portal
Accessed via compatible device/web browser (PC/MAC, iOS and Android), the User Portal offers the
following functions:
● Find, navigate, and search items.
● Play archives and live streams.
● Make calls.
Search and Refresh Lists
You can search items listed on the User Portal, for example, archives and live streaming.
To search for a target item in the list:
» Enter the name, or part of the name of the entry you want to find in the text field, and then click
.
•
•
Keyword search is not case sensitive.
In the archives search box, you can also type the keywords specified to an
archive.
•
If you want to return to the full list view, delete all characters in the text field and
click
.
To refresh the list:
Click the icon
displayed above the list.
Polycom, Inc.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
User Interfaces
TV user interface (also called the “TVUI”)
Accessed via standards-based video conferencing endpoints, this interface can be used to record meetings,
control recording and playback.
Understand the Main Menu
In addition to the Admin Portal, the RealPresence Capture Server system also provides a TV user interface
for you to perform the most commonly used operations. The TV user interface appears after an endpoint
dials the RealPresence Capture Server system and sets up a connection successfully.
TV User Interface
After the endpoint sets up connection with the RealPresence Capture Server system, it enters the TV user
interface menu page, where common recording and playback options are provided, as shown below.
If the Start Recording Immediately function has been enabled in the VRR used by the endpoint for dialing,
the endpoint enters Recording Status directly. You can control the RealPresence Capture Server system
using the FECC and DTMF functions of the remote control. When your endpoint supports FECC or DTMF,
use the remote control to operate the TV user interface menu page.
The table below defines in detail the FECC and DTMF operation keys on the remote control of Polycom
endpoint.
FECC and DTMF Operation Keys
Scenario
FECC
Description
DTMF
Description
When in the menu
display state
Pause the
recording.
*1
Pauses the recording.
Confirm the
selection.
*2
*3
*5
Starts or resumes a paused
recording.
Select leftward
(cyclic).
Stops the recording.
Select rightward
(cyclic).
Plays back the recording.
Polycom, Inc.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
User Interfaces
When in the video
playing state
-
-
-
-
-
-
*1
*2
*3
Pauses the current video.
Starts or resumes a paused video.
Stops playback of the current video
and returns to the main menu.
-
-
*4
*6
Reverses the current video.
Fast forwards the current video.
Console
Accessed via vSphere client console or SSH, console is used to view/change IP settings and reboot the
system. For example, set DNS server, view disk space usage and shut down the system.
Refer to AppendixA for more supported command line information.
Polycom, Inc.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Hardware Installation
The front panel of the Polycom RealPresence Capture Server system is shown in the next illustration.
Hardware Requirements
The following table shows the hardware requirements for the RealPresence Capture Server.
Hardware Requirements
Simultaneous Recording
Ports
6
12
6
18
9
40
0
LIVE Stream
Virtual Cores
CPU
3
8+
•
12+
16+
8+
•
2.67GHz (Intel®
Xeon® CPU
x5650@
2.67GHz or
better) CPU
•
2.67GHz
•
2.67GHz
2.67GHz
(Intel® Xeon®
CPU x5650@
2.67GHz or
better) CPU
(Intel® Xeon®
CPU x5650@
2.67GHz or
better) CPU
(Intel® Xeon®
CPU x5650@
2.67GHz or
better) CPU
•
2.90GHz (Intel
Xeon CPU
•
2.90GHz (Intel
Xeon CPU
•
2.90GHz (Intel
Xeon CPU
•
2.90GHz (Intel
Xeon CPU
E5-2690 @
2.90GHz or
better) CPU
E5-2690 @
2.90GHz or
better) CPU
E5-2690 @
2.90GHz or
better) CPU
E5-2690 @
2.90GHz or
better) CPU
Minimum RAM
16 GB
80 GB
16 GB
32 GB
32GB
Minimum Accessible
Storage
120 GB
120 GB
120 GB
Software Requirements
VMWare vSphere
5.1/5.5
VMWare vSphere
5.1/5.5
VMWare vSphere
5.1/5.5
VMWare vSphere
5.1/5.5
Please ensure sufficient CPU and memory resources are reserved for VMware as
required on the table, otherwise the system may not function properly or in the
worst case may fail to respond.
Polycom, Inc.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Software Installation
Software Requirements
RealPresence Capture Server - Virtual Edition is supported on VMware vSphere 5.1/5.5. Before you install
and configure the RealPresence Capture Server system, you need the following:
● VMware vSphere 5.1/5.5 client installed where you can access the ESXi host
● Login credentials and IP addresses of one or more VMware vShpere hosts on which you will deploy
your RealPresence Capture Server OVA
Requirement" for the supported versions
Resource and License Management
For the 1st installation of Virtual Edition, the 90-day trial license provides 6/3 capacity and basic functions.
To permanently enable the Capture Server system and enjoy the full capabilities, a RealPresence Capture
Polycom, Inc.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Software Installation
Server license is required. For this release, the 6/3 model is supported for Virtual Edition only, which is
different from the Appliance Edition.
Licence of Capability
License
6 Calls Record
3 Calls (of the 6 total calls) stream live
Web Browser and OS Requirements
The following table lists the requirements on your computer to access the Admin Portal and User Portal.
User Portal Web Browser Requirement
Operating System
Browser Name
Version
PC (Windows 7, and Windows 8)
Internet Explorer
9, 10, 11
Firefox
Chrome
Safari
32, 33
38, 39
MAC OS-X
7.1, 8.0
32, 33
(Intel-based Leopard, Snow, and Lion)
Firefox
Chrome
Safari
38, 39
iOS 7, 8
7.1.2, 8.1.1
Andriod phone and tablet
Android browser
4.3, 4.4.2
Set up RealPresence Capture Server in a Virtual
Environment
The following steps assume you are familiar with deploying applications into a VMware environment.
Polycom, Inc.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Software Installation
To set up RealPresence Capture Server in a virtual environment:
1 Obtain the RealPresence Capture Server OVA package.
2 Deploy the OVA file into the VMware vShpere hosts that you have set up.
If the VMware vSphere host is very busy or it does not match the RealPresence
Capture Server hardware requirements, the deployment may fail. See table
"Hardware Requirements" for more about hardware requirements.
3 From the vSphere client, edit the instance and configure to the customer options.
4 Click the Summary tab and note the temporary IP address of RealPresence Capture Server system
assigned by DHCP.
5 On VMware console, click Edit and adjust the CPU, memory, and the minimum disk space.
Configure NFS (Required)
Capture server virtual edition requires a NFS share as its media storage. The procedure below
demonstrates how a NFS share is configured on a typical Linux distribution.
Make sure that NFS is co-located on the same switch/location as the Capture Server system to ensure
stable I/0 operations.
To export a shared storage location via NFS on a typical Linux system, CentOS used in
below example:
1 Make sure the NFS service has been installed and is running.
Examples:
[root@centos-nfs ~]# service nfs status
rpc.svcgssd is stopped
rpc.mountd (pid 20129) is running...
nfsd (pid 20194 20193 20192 20191 20190 20189 20188 20187) is running...
rpc.rquotad (pid 20125) is running...
2 Edit the NFS configuration file /etc/exports to set the file system paths for export.
Examples:
[root@centos-nfs ~]# cat /etc/exports
/home/nfs *(rw,no_root_squash)
/home/nfs_zip_1 192.168.9.78(rw,no_root_squash)
Polycom, Inc.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Software Installation
3 Restart the NFS service.
Examples:
[root@centos-nfs ~]# service nfs restart
Shutting down NFS daemon:
Shutting down NFS mountd:
Shutting down NFS quotas:
Shutting down NFS services:
Starting NFS services:
[ OK ]
[ OK ]
[ OK ]
[ OK ]
[ OK ]
[ OK ]
[ OK ]
[ OK ]
[ OK ]
[ OK ]
Starting NFS quotas:
Starting NFS mountd:
Stopping RPC idmapd:
Starting RPC idmapd:
Starting NFS daemon:
4 Go to Configuration > Media Storage Settings and configure the settings.
Product Activation
Obtain the Product Activation Key from Polycom
A new installation of RealPresence Capture Server Virtual Edition comes with a 90-day trial license. You
must activate the license shipped with your order with the product serial number (you can find this by
choosing Admin > Product Activation) identified within RealPresence Capture Server.
To obtain the product activation key:
1 Go to Admin > Product Activation to obtain the serial number. Write it down for later use.
and go to Support Home.
3 Go to Licensing & Product Registration > Activation/Upgrade.
4 Click All other Polycom Products in the pop-up window.
5 Enter your e-mail address and password to log in to or register for a new account.
6 Follow the page prompts step by step to generate the Key Code required for system activation.
7 Enter the Serial Number you recorded and click Next.
8 Follow the page prompts step by step to generate the Key Code required for system activation.
Enter the product options license numbers.
9 Note down the activation key (Key Code) on the page and click Upgrade.
10 Go back to Capture Server Admin Portal and activate the system under Admin > Product
Activation.
Polycom, Inc.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Software Installation
To download Capture Server software and VE version:
1 Go to Admin > Product Activation to obtain the serial number. Write it down for later use.
and go to Support Home.
3 Go to DOCUMENTS & DOWNLOADS > UI Infrastructure.
4 Click Video Content & Management Solutions at the left side bar.
5 Click Polycom RealPresence Capture Server, Virtual Edition.
6 Enter your e-mail address and password to log in to or register for a new account.
7 Click the EULA and agree to it.
8 Click Submit.
9 Go to Capture Server Admin Portal and activate the system under Admin > Product Activation.
To view the system activation status:
» Go to Admin > Product Activation. The following system information is displayed.:
Parameter
Description
License Type
Software Version
Serial Number
Activation Status
Permanent license or 90-day trial version
Current version of the software running on the system
Product serial number
Whether the system is activated;
indicates it is not activated
indicates activated system, and
Max Recording Ports
Maximum number of recording ports supported by the system
Maximum number of live streaming ports supported by the system
Max Live Streaming Ports
Max Streaming Sessions
Maximum number of video-on-demand and live streaming sessions
supported by the system.
Base: 250.
Note: After purchasing and activating the license, the streaming
sessions capacity will be increased from 250 to 500.
Media Encryption
Whether the AES encryption function of the system is activated.
This is a charged function. You can use it only after purchasing the
license and activating it.
Streaming without recording (no archive)
Whether the streaming without recording function of the system is
activated.
Once this function is activated, the system performs live streaming
without recording and no archives left.
Timecode Watermark
Whether the basic timecode watermark capability for transcoded mp4
on-demand files is activated. On-demand archives can be output with
basic timecode watermarking.
Polycom, Inc.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
System Initialization
Fast Configuration Wizard
.
The Fast Configuration Wizard pops up if Media Storage Settings is not configured, it gets you up and
running as soon as possible, all settings in the wizard can be changed later on under the various
configuration pages.
Step 1: Configure Media Storage Settings
By default, RealPresence Capture Server stores the files on a network file system if you enable it.
Note: You need to click Next and save changes at the next step by clicking OK, otherwise the configured
settings will not be saved.
Step 2: Configure IP Settings
The RealPresence Capture Server system supports both IPv4 or IPv4 & IPv6 network communications. You
can configure parameters to be used for network communication, including system IP address, DNS server,
and NAT server.
If you are done with configuration, click OK to save the changes.
Step 3: Product Activation
The basic system information is displayed here
.
For configuration steps, refer to Product Activation. As the Virtual Edition comes with a 90-day trial license,
you can use the Capture Server system without activating the license.
Step 4: Configure Signaling Settings
For H.323, if a gatekeeper is configured on your network, you can register RealPresence Capture Server to
the gatekeeper to simplify calling. A gatekeeper manages functions such as bandwidth control and
admission control. A gatekeeper also handles address translation, which allows you to make calls using
static aliases instead of IP addresses that may change each day.
If you make SIP calls, you can register RealPresence Capture Server to a SIP server to simplify calling.
For configuration steps, refer to Configure Signaling Settings
Polycom, Inc.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
System Initialization
Step 5: Configure System Time
You also can set the RealPresence Capture Server system time from the Fast Configuration Wizard
For configuration steps, refer to Set the System Time
Configure IP Settings through Console
By default, when a new RealPresence Capture Server is started, it obtains an IP address from the DHCP
server automatically. Follow the steps below to check the IP address assigned by DHCP server. You can
configure IP settings from either Capture Server system’s Console or Admin Portal.
To set the system IP address in the RealPresence Capture Server’s console:
1 Open the console of your RealPresence Capture Server.
2 The default console display is shown in the next illustration
3 The IP address displayed on console is shown in the above illustration, the default IP address is
https://192.168.1.254
4
If needed, modify the RealPresence Capture Server IP address in the Admin UI. See To change the
system’s initial IP settings from the Admin Portal:
5 Type Alt+F2 keys to go to the login screen.
6 Enter the user name and password (both are polycom by default).
7 Set RealPresence Capture Server a static IP or DHCP for LAN interface using Network
Note: After you are finished with DHCP setting configuration, go to console and get the IP address
information assigned by DHCP server.
8 After you set the IP, the Capture Server system will ask if you want the changes, click Yes to reboot.
Polycom, Inc.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
System Initialization
Configure IP Settings through Admin Portal
The RealPresence Capture Server system supports both IPv4 or IPv4 & IPv6 network communications. You
can configure parameters to be used for network communication, including system IP address, DNS server,
and NAT server.
The RealPresence Capture Server system supports IPv6 system management.
To set IP:
1 Go to Configuration > IP Settings and configure the following settings:
Set IP Parameters
Parameter
Description
Enable Network Separation
Select this check box to route the management, streaming traffic and video call
traffic through LAN 1 and LAN 2 interfaces separately.
This offers higher security for the signaling data.
Obtain an IP Address
Automatically (DHCP)
If you select this radio button, RealPresence Capture Server obtains an IPv4
address automatically via DHCP.
Note: Obtaining an IP address automatically is not recommended. For best results,
assign a static IP to RealPresence Capture Server.
Using the following IP
Address
•
•
•
IP Address: the IP address of the system.
Subnet Mask: the subnet mask of the system.
Default IPv4 Gateway: the address of the interface to use for accessing the IPv4
gateway.
•
•
Preferred DNS Server: the preferred DNS server address for the system to
resolve domain names.
Alternate DNS Server: the alternate DNS server address for the system to
resolve domain names.
Enable IPv6
Specify whether to enable IPv6 related functions.
Obtain an IP Address
Automatically (IPv6)
Specify whether to obtain the IPv6 address automatically using Stateless Address
Auto-configuration (SLAAC).
Note: Obtaining an IP address automatically is not recommended. For best results,
the system should be configured with a static IP address.
Using the following IP
Address (IPv6)
Select this option to manually configure a static IPv6 address:
•
Link Local Address: Specify an address for link local communication.
Routers do not forward packets with link local addresses.
•
Site Local Address: Specify an address for site local communication.
Routers do not forward packets with site local addresses.
•
•
Global Address: Specify one or several address for communication with
external IPv6 networks. Separate several addresses with a comma (,).
Default IPV6 Gateway: Specify the address of the interface to use for accessing
the IPv6 gateway.
Polycom, Inc.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
System Initialization
Enable ICMP V6 DAD
Enable ICMP Echo
Specify whether to enable Duplicate Address Detection (DAD) to ensure the IPv6
address set to the system is unique in the local network.
Specify whether to allow the system to respond to an ICMP (Internet Control
Message Protocol) echo request (Ping) sent from other devices in the network.
In some high-security environments, you may need to disable this option to protect
the system from Ping attacks.
MTU
Specify the Maximum Transmission Unit (MTU) size.
LAN Speed
Specify the speed or duplex modes for the LAN port. Select Auto to let the system
set the speed automatically.
Note: When setting the LAN port speed, contact your network administrator to
ensure that the switch link rate matches the system port speed.
NAT Public (WAN) Address
Set the external IP address in Network Address Translation (NAT) environment.
NAT environments use private internal IP addresses for devices within the network,
while using one external IP address to allow devices outside the LAN to access
Capture Server Web Portal, view live streaming or VoD playback.
2 Configure the following general settings:
General System Network Parameters
Parameter
Host Name
Domain
Description
Specify the host name of the system.
Specify the domain name of the system.
3 Click Add to add static routes. You need to enter the following information for each route:
Set Route Parameters
Parameter
Destination
Gateway
Description
Specify the IP address of the destination network.
Specify the IP address of the gateway to access the destination network.
Specify the subnet mask for the destination network.
Subnet Mask
4 Click OK. The system restarts to apply your changes.
Polycom, Inc.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
System Configuration
This section explains the functions used for system administration in detail.
Check System Status on Home
You can find real time system status and information on Home.
Signaling Connection
Shows connection information and recording status of the calls to and from video endpoint or MCUs with
this Capture Server. Click
parameters descriptions.
to expand detailed parameters information. The table below provides
Signal Connection Parameters
Parameter
Description
Far End Number
Start Time
The far end number used by the connection.
When the calls started.
Signaling Type
Dial In/Out
H.323 or SIP.
Whether the connection is incoming or outgoing.
The VRR number used by the connection.
Whether the connection is performing live streaming.
VRR Number
Live Streaming
Detail
Additional information like VRR name, audio type, audio call rate, video type,
video call rate, etc.
Real Time Information
Displays call address, audio packet loss, video resolution, video frame rate,
etc.
You can control the recording using the controls:
●
●
●
●
●
: Start recording.
: Pause recording.
: Resume recording.
: Stop recording.
: End the connection.
You can dial out to connect the endpoint to record using Dial out to record.
Polycom, Inc.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
System Configuration
You can control the Quick Code playback using the controls:
●
●
●
●
●
●
●
: Pause playback.
: Resume playback.
: Stop playback.
: Start playback.
: Fast backward playback.
: Fast forward playback
: End the connection.
You can control the RMX playback using the controls:
●
●
●
●
●
●
●
: Pause playback.
: Resume playback.
: Stop playback.
: Fast backward playback.
: Fast forward playback
: Change conference layout
: End the connection.
System Information
Displays following system basic information:
● System name
● The current version of the software running on the system.
● The maximum number of recording ports and live streaming ports supported by the system.
● Recording ports and live streaming ports usage.
System Alerts
Shows the system alert information, for example, registration to primary gate-keeper failed, LAN2 failed to
acquire DNS automatically, IP address conflict for LAN1, CPU usage is too high, memory usage is too high,
NFS connection is lost, temperature is out of range, log size has reached the threshold value, etc.
Signaling Server Status
Displays gatekeeper registration status and SIP server registration status. When the H.323 registration is
successful, the system’s E.164 prefix and H.323 alias are displayed.
Hardware Status
The following table shows the indicators and the hardware status in general.You can check the following
status:
● Basic
Polycom, Inc.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
System Configuration
CPU Usage
Memory Usage
System Disk Usage
● Extension: Specifies value, total storage and status for RAID, disk, local media disk, power, etc.
Web Connections
Displays connection status on both Admin and User Portal for administrators, users, auditors, and
anonymous users.
● Admin Portal Connections:
Current Administrators
Current Users
Current Auditors
● User Portal Connections:
Current Administrators
Current Users
Current Anonymous
External Server Status
The system can be integrated with external servers, such as IIS and WOWZA. You can check the
configuration for IIS, WOWZA, Windows Media Server, AKAMAI, AD server and NFS server respectively.
Note: Make sure the NFS server is set up beforehand.
Manage Users and Groups
This section explains how to manage users.
User Roles
Users who are defined in the RealPresence Capture Server system can log in to the system’s Admin Portal
to complete authorized operations. The system supports three user roles:
● Auditor: Who can only audit and manage system logs and set personal information.
● Administrator: Who can perform the most operations, and can view and configure all pages.
● User: Who can access archives and view live streaming.
Add a New User
You can add a local user to the system.
To add a local user:
1 Go to User > Users.
2 Click Add.
Polycom, Inc.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
System Configuration
3 Configure the following settings (* indicates mandatory options):
Adding an User
Parameter
Description
User ID
Specify the user ID used for web login. User ID must be unique with a length of
1-128 characters, and consist of alphanumeric or "_" symbol characters. Once
created, user ID cannot be modified.
Full Name
Password
Confirm Password
Role
Specify the user's full name.
Specify the login password.
Specify the confirmed password which must be identical to the login password.
User roles: Administrator, Auditor or User.
Different roles determine the user operation permissions after logging in to
pages.
Description
Specify additional related information.
Modify User Information
The administrator can modify local user information and password, or delete user.
To modify user information:
1 Go to User > Users.
2 Select the user entry you want to edit.
3 Click Edit.
4 Enter the user information, and then click OK.
To modify user password (local user only):
1 Go to User > Users.
2 Select the user entry you want to modify.
3 Click Change Password.
4 Enter the new password and confirm password, then click OK.
After the password is changed by the administrator, the user is required to change
the password when he logs in to the system using that password for the first time.
To delete a user:
1 Go to User > Users.
2 Select the user entry you want to delete.
3 Click Delete.
Polycom, Inc.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
System Configuration
Create and Manage Groups
You can create user groups and set permissions for groups.
A default group, named all-users, is built in the system. It includes all the users defined in the RealPresence
Capture Server system. all-users group cannot be modified or deleted. Administrators can define a new
group, modify or delete existing groups.
To view user groups:
1 Go to User > Groups.
2 Filter by Local Groups or AD Groups.
To create a new user group:
1 Go to User > Groups.
2 Click Add.
3 Specify a name for the group. The group name must be unique. You can enter associated
descriptions if necessary.
4 Click Group Members.
5 Select users to add to the group, and then click Add.
To delete an item, select it and click Delete.
To modify or delete an existing group:
1 Go to User > Groups.
2 Select the group entry you want to delete.
3 Click Edit or Delete.
Set Recording Parameters
You can configure supplementary recording settings from Configuration > Call Settings. The system call
setting will be applied as default value to all calls in the system. If there is difference in recording template,
then usually recording template setting will take precedence.
To configure recording setting options:
1 Go to Configuration > Call Settings.
Polycom, Inc.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
System Configuration
2 Configure the following settings:
Record Parameters
Parameter
Description
Allow recording even when no
resources are available to create
live stream(s).
If this option is selected, when there are insufficient resources available to
live stream a meeting, the system records the meeting to the hard disk
automatically. You cannot continue viewing the video in real time through the
web. However, you can play back the video upon the completion of recording
and format conversion.
If this option is not selected, when there are no live streaming resources, the
system rejects all calls that have live streaming enabled.
Key Frame interval
Specify the fast forward and backward intervals when playing back recorded
files on an endpoint.
For example, if it is set to one minute, the system inserts an index marker
every minute when recording. When you press Fast forward using FECC
(Far End Camera Control) or DTMF, the video playback jumps to the nearest
index marker from the current location. Shorter intervals result in larger
archive.
Indication Tone
Played to indicate that recording is ongoing, typically it is a very short beep
with intervals between beeps, measured in second.
Media Encryption
If the Capture Server is licensed for call encryption, this option specifies how
AES (Advanced Encryption Standard) encryption is enabled and SIP
connections:
•
Required For All Calls: Enable the AES encryption for all H.323 and SIP
calls, including video and audio only calls. This option requires the device
to connect the system with AES enabled, otherwise, the connection
cannot be set up.
•
•
When Available: Enable the AES encryption and SIP connections when
the peer device enables the AES option, and vice versa.
Off: Disable the AES encryption and SIP connections.
Support AES 256-Bits key for
encryption
If the Capture Server is licensed for call encryption, this option specifies
whether to enable the 256-bit key for AES encryption. If not selected, the
AES uses 128-bit key for encryption by default.
Max Call Length
The maximum call length for recording calls. The value is 4 hours by default.
Note: Valid call length ranges from 1 to 8 hours.
Max Call Length (for streaming
only call)
The maximum call length for streaming only calls. The value is 8 hours by
default.
Note: There is no limitation to this option.
Enable all IVR notifications
Enable IVR service at system level, the default left time to play IVR is 10
minutes
Enable Global Quickcode
Playback PIN
Enable quickcode playback PIN at system level.
Note: If a PIN code is set under archive properties, the individual PIN code
will override that set at system level.
Polycom, Inc.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
System Configuration
Note: The template value will override the system value set under Configuration > Call Settings on Admin
Portal.
Configure Signaling Settings
For H.323, if a gatekeeper is configured on your network, you can register RealPresence Capture Server to
the gatekeeper to simplify calling. A gatekeeper manages functions such as bandwidth control and
admission control. A gatekeeper also handles address translation, which allows you to make calls using
static aliases instead of IP addresses that may change each day.
If you make SIP calls, you can register RealPresence Capture Server to a SIP server to simplify calling.
H.323
If your network supports H.323, you can register RealPresence Capture Server to a H.323 server to simplify
calling.
To register the system to a gatekeeper to make H.323 calls:
1 In the address line, enter the system’s IP address in this format: https://<system IP address>/admin.
2 Go to Configuration > Signaling Settings > H.323.
3 Select Register To Gatekeeper.
4 Configure the settings listed in the following table. After you finish the configuration, click OK.
H.323 Gatekeeper Parameters
.
Parameter
Description
Gatekeeper type
Primary Gatekeeper
Gatekeeper Address
Choose between Polycom and Cisco VCS.
Indicates whether the system is registered to the primary gatekeeper.
Specify the IP address for the gatekeeper.
Note: Never enter Capture Server’s IP address.
Gatekeeper Port
Specify the port number for the gatekeeper, the default value is 1719.
Register User Information for
Gatekeeper
Specify whether to register the system to a Polycom Gatekeeper server for
H.235.0 authentication.
When H.235.0 authentication is enabled, the gatekeeper ensures that only
trusted endpoints are allowed to access the gatekeeper.
Gatekeeper User
Specify the user name for registration with the Polycom Gatekeeper server.
Specify the password for registration with the Polycom Gatekeeper server.
Indicates whether the system is registered to the alternate gatekeeper.
Gatekeeper Password
Alternate Gatekeeper
Note: The alternate gatekeeper is used only when the primary gatekeeper
is not available.
System Prefix / E.164
Polycom, Inc.
Specify the E.164 number for the system.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
System Configuration
System H.323 Alias
Specify the H.323 alias for the system.
Remote Display Name
Specify the name to be displayed to the far end.
Note: If you set the remote display name with dual-bytes characters like
Chinese, you will not see the characters on the far end endpoints in a
H.323 call between endpoints and the Capture Server system.
If the RealPresence Capture Server is registered to DMA as gatekeeper, you can
find Capture Server's information on DMA portal under Network > MCU > MCUs.
SIP
If your network supports SIP, you can use SIP to connect video calls. RealPresence Capture Server
supports SIP integration with SIP servers such as the Polycom DMA.
To configure the SIP settings:
1 Go to Configuration > Signaling Settings > SIP.
2 Configure the following settings:
SIP Parameters
Parameter
Description
Transport Type
Specify the transport layer protocol used for communicating with the SIP
server. It needs to be consistent with the protocol supported by the SIP
server.
Enable Certificate Validation
Specify whether to validate the server’s certificate before accepting it.
This option is available only after you select TLS as the Transport Type.
Note: RealPresence Capture Server always sends its own certificate to the
server, regardless of the selection here.
Register to SIP Server
SIP Server Type
Specify whether to register the system to the SIP server.
Choose a SIP server type from the dropdown list, currently only Generic
available.
SIP Server status
Specify:
•
•
•
Server Address
Server Port
Server Domain Name
Note: Never enter Capture Server IP for Server Address.
Register User’s Information
Specify:
•
•
•
User Name
Auth User Name
User Auth Password
Polycom, Inc.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
System Configuration
Outbound Proxy Server
For communication with the SIP server when the system is configured on
the internal network, an outbound proxy server is required to implement
traversal of the firewall or NAT. In this case, you need to set the IP address
and port number for the outbound proxy server.
•
•
Server Address: Enter an address of the SIP server.
Server Port: Enter the port of the SIP server.
3 Click OK.
•
If you need to configure both H.323 Gatekeeper parameters and SIP parameters
at the same time, click OK after you finish the configuration of both parameters.
•
If the RealPresence Capture Server is registered to DMA as SIP server, you can
find Capture Server's information on DMA portal under Network > Endpoints.
Configure Port Settings
Port Settings allow specific ports in the firewall network environment to be allocated to multimedia calls.
To configure the port:
1 Go to Configuration > Port Settings.
2 Select Enable port configuration.
3 Configure the following settings:
Port Parameters
Parameter
Description
TCP Ports
Specify the TCP port range.
You can set the starting port number (the default value is 10000), and the
ending port number is calculated automatically.
UDP Ports
Specify the UDP port range. You can set the starting port number (the default
value is 20000), and the ending port number is calculated automatically.
Streaming Port
Multicast Port
Specify the streaming port range. The default value is 1640.
Specify the multicast port range. The default value is 1641.
4 Click OK. The recording server restarts to apply your changes.
Set the System Time
You also can set the RealPresence Capture Server system time from the Admin Portal.
To set the system time:
1 Go to Configuration > System Time.
Polycom, Inc.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
System Configuration
2 Configure the following settings:
System Time Parameters
Parameter
Description
Specify how to set the system time:
Time Service
•
•
Console: Synchronize the system time with your computer.
NTP Server: Obtain the system time from a time server.
Date
The current system date and time.
Changing the time manually is not recommended.
Time
Time Zone
The current time zone.
The NTP servers 1 and
The NTP server 2
Specify the address or domain name of a network time server. NTP server 2
is used only when NTP server 1 is not available.
Note: If you set a domain name, make sure you have already set a DNS
server address that can resolve this domain name in Configuration > IP
Settings.
3 Click OK. The system restarts to apply your changes.
Configure Media Storage Settings
By default, RealPresence Capture Server stores the files on a network file system if you enable it.
To save your files on a network file system:
1 Click Configuration > Media Storage Settings.
2 Configure the following settings for the network file system.
Media Storage Setting
Parameter
Description
NFS Server Name
NFS Server Address
NFS Storage Folder
Enter a name for the NFS server.
Enter an address of the NFS server.
Specify the folder path to the NFS storage.
Note: Make sure the NFS server is set up beforehand.
Test
Test whether the NFS server is reachable.
Polycom, Inc.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
System Configuration
Synchronize archives when storage setting
changed
When this option is checked, the archives on the storage will be
synced up with the archive record in the system database, and
could be viewed from portal (viewer or admin). The sync-up
action takes effect after the system restarts.
Send warning e-mail to Admin when remaining
NFS free space reaches: (GB)
Set a NFS storage space threshold. You can set a value in the
range of 10-50GB. After the system reaches the threshold,
RealPresence Capture Server will send notifications to
specified receivers.
3 Click OK. The server restarts to apply your changes.
•
If Network storage is disabled or error, RealPresence Capture Server cannot dial
in and dial out.
•
Capture Server supports NFS Version 2 and 3.
Configure Multicast Settings
The Polycom RealPresence Capture Server system supports the multicast function and can perform the
one-to-many transmission of video streams. The system only needs to send the video streams once so that
multiple computers can simultaneously share live streaming so as to greatly reduce the demand for
transmitting network video streams and save the network bandwidth.
The Polycom RealPresence Capture Server system supports the simultaneous multicast of up to 100
channels.
Before You Start
To use the multicast function successfully, the following conditions are required to be met:
● The multicast function is activated in the Polycom Capture Server system. Contact your supplier to
obtain this function.
The multicast function is disabled by default.
● Routers and switches in the network of client computers are configured correctly to support the IP
multicast communication with the Polycom Capture Server system.
Configure Multicast
Before you use the system to perform the multicast, it is necessary to configure parameters on the Multicast
page.
To configure multicast parameters:
1 Go to Configuration > Multicast Settings.
2 Configure the following settings:
Polycom, Inc.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
System Configuration
Parameter
Description
Auto Multicast for Live
Streaming
If this option is selected, all the live streaming will start
multicast automatically.
This option is disabled by default.
Multicast IP Pool
Starting Address
Specify the initial IP address of the multicast address pool.
The system uses 100 consecutive addresses starting with
this address to perform the multicast.
The valid starting IP address range is 233.0.0.0 -
239.255.255.156.
Multicast TTL.
Specify the TTL value:
•
•
•
•
•
Local Network -- 1
Intranet -- 32
Internet, Inter-continent -- 64
Internet, Inter-continent -- 128
Maximum allowed value -- 255 (default value)
You cannot start or stop the multicasts manually, multicasts will start once the live
streaming starts and stop after the live streaming stops.
Multicast
The Polycom RealPresence Capture Server system supports the video multicast function and can send
video streams to a group of computers at the same time. Users can play multicast videos from either the
system's Admin Portal or User Portal.
Multicast of a Live Streaming
Users can start a multicast from the live streaming list. The system supports up to 100 concurrent multicast
channels.
•
•
VoD archive multicast is not supported.
To start a multicast (when multicast is disabled):
1 Create a recording template with Enable Multicast selected.
2 Configure Multicast TTL from recording template.
3 Create a VRR with the configured recording template.
4 Start a live streaming with the VRR, and multicast starts at the same time.
To view a multicast streaming:
1 Click Live Streaming.
Polycom, Inc.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
System Configuration
2 Select a live streaming and click Multicast Detail.
3 Click Play
The media file is played ina new window.
•
•
•
If there are MP4 and WMV streams, there would be two multicasts for the two
stream types.
If there are two bitrate streams, center will choose the higher bitrate stream to do
multicast;
You can view multicasts from either Admin or User Portal.
Certificate Management
X.509 certificates are a security technology that assists networked computers in determining whether to
trust each other. The RealPresence Capture Server system supports using X.509 certificates (version 3 or
earlier) for authenticating the network connections. Once a certificate is purchased and installed in the
RealPresence Capture Server system, it may be used for the following connections:
● Web server (TLS)
● Microsoft Active Directory server (LDAPS)
● SIP recording (TLS)
● FTP Server (FTPS)
Install the Certificate in the System
Certificates and certificate chains are a security technology that allows networked computers to determine
whether to trust each other.
By default, to support encrypted communications and establish a minimal level of trust, the system includes
a default key and self-signed certificate.
However, to implement a full certificate chain to a root certificate authority (CA), the system requires both a
root CA certificate and an identity server certificate signed by the root CA. Therefore, at some time you must
request these certificates from your CA.
Install certificates on the RealPresence Capture Server system in Admin Portal
1 Install your chosen certificate authority’s public certificate, if necessary, so that the RealPresence
Capture Server system trusts that certificate authority.
2 Create a certificate signing request to submit to the certificate authority.
3 Install a public certificate signed by your certificate authority that identifies the RealPresence
Capture Server system.
The RealPresence Capture Server system accepts the following types of certificate chains or single
certificates:
Certificate Types
Type
Description
.pem
Privacy Enhanced Mail, base64 encoded DER certificate, enclosed between
"-----BEGIN CERTIFICATE-----" and "-----END CERTIFICATE-----".
Polycom, Inc.
34
Download from Www.Somanuals.com. All Manuals Search And Download.
System Configuration
.cer, .crt, .der
Usually in binary DER form, but Base64-encoded certificates are also common
(refer to .pem).
.p7b, .p7c
.p12
PKCS#7 SignedData structure with certificates or CRLs and without data.
PKCS#12, may contain public certificates and password-protected private keys.
.pfx
PFX, predecessor of PKCS#12. This type usually contains data in PKCS#12
format, for example, with PFX files generated in IIS.
Install a Certificate Authority’s Certificate
You must install a certificate authority’s certificate if you don’t obtain a certificate chain that includes a signed
certificate for the RealPresence Capture Server system, your certificate authority’s public certificate, and
any intermediate certificates.
The certificate must be either a single X.509 certificate or a PKCS#7 certificate chain. If it is ASCII text, it’s
in PEM format, and starts with the text -----BEGIN CERTIFICATE-----. If it is a file, it can be either PEM or
DER encoded.
To install a certificate for a trusted root CA:
1 Go to Configuration > Certificate Management.
2 If you are using a certificate authority that is not listed, obtain a copy of your certificate authority’s
public certificate.
3 Select Install Certificates.
4 Do one of the followings:
Click Upload Certificate and click Add to browse to the certificate. Upload the selected
certificate. Enter your password if necessary.
Copy the certificate text, and then click Paste certificate to paste it into the text box.
5 Click OK. If the certificate can be verified, the system installs it.
Create a Certificate Signing Request
This procedure creates a CSR (certificate signing request) that you can submit to your chosen certificate
authority.
Creating a new CSR overwrites the existing pending CSR, if any.
To create a certificate signing request:
1 Go to Configuration > Certificate Management.
2 Select Issue Signing Request.
Polycom, Inc.
35
Download from Www.Somanuals.com. All Manuals Search And Download.
System Configuration
3 Enter certificate information:
Certificate Information
Parameter
Description
Specify the name of the system.
Common Name
Organizational unit (OU)
Specify the business unit defined by your organization (Optional). Use a
comma(,) to separate several business units.
Organization
City or locality (L)
State (ST)
Specify your organization’s name (Optional).
Specify the city where your organization is located (Optional).
Specify the state or province where your organization is located (Optional).
Specify your two-character country code.
Country (C)
4 Click OK.
The Certificate Signing Request dialog box displays the encoded request.
5 Copy the entire contents of the Encoded Request box and submit it to your certificate authority. Be
sure to include the text -----BEGIN NEW CERTIFICATE REQUEST----- and -----END NEW
CERTIFICATE REQUEST-----.
Depending on the certificate authority, your CSR may be submitted by pasting it into a web page.
6 Click OK.
When your request has been processed, your certificate authority sends you a signed public
certificate for your RealPresence Capture Server system. Some certificate authorities also send
intermediate certificates or its root certificates.
The certificate authority might send you the certificate as e-mail text, an e-mail attachment, or content
on a secure web page.
Refer to To install a certificate for a trusted root CA:to install a certificate.
View Certificate Details
You can review installed certificate details.
To view the certificate details:
1 Go to Configuration > Certificate Management.
2 Click Display Details.
Certificate Details
Parameter
Certificate Info
Issue To
Description
States the purpose and alias of the certificate.
States the entity to which the certificate was issued and the certificate serial
number.
Issue By
States the issuer.
Polycom, Inc.
36
Download from Www.Somanuals.com. All Manuals Search And Download.
System Configuration
Validity
States the issue and expiration dates.
Fingerprints
States SHA1 and MD5 fingerprints (checksums) for confirming certificate.
When a certificate is about to expire, you are notified ten days prior to the expiration
date.
Remove a Certificate
You can remove installed certificates.
A certificate cannot be removed when it is the only private certificate which can be
used as web service certificate in the system.
To remove a certificate:
1 Go to Configuration > Certificate Management.
2 Highlight the certificate you want to remove.
3 Click Delete.
Client Certification
If client certificate validation is enabled in the system, other systems can connect to the RealPresence
Capture Server system only if they present a client certificate issued by a CA that the system trusts.
Enable the client certificate validation only in one of the following situations:
● Your network has implemented a complete PKI (Public Key Infrastructure) system, including a CA
server, client software, and the appropriate operational procedures. Client hardware, tokens, and
smartcards are optional.
● The CA’s public certificate is installed in the RealPresence Capture Server system so that it trusts the
CA.
● All authorized users’ systems, including yours, have a client certificate signed by the CA that
authenticates them to the RealPresence Capture Server system.
To enable the client certificate validation:
1 Go to Configuration > Certificate Management.
2 Tick Enable web client certificate validation.
3 Click OK. The system restarts to apply your changes.
Use OCSP to Obtain Revocation Status
You can enable OCSP (Online Certificate Status Protocol) to obtain the revocation status of a certificate
presented to the system.
If the certificate includes an AIA extension, the system has the information needed to configure OCSP for
obtaining revocation status.
Polycom, Inc.
37
Download from Www.Somanuals.com. All Manuals Search And Download.
System Configuration
To configure OCSP:
1 Go to Configuration > Certificate Management.
2 Select Enable OCSP.
3 Click OK. The system restarts to apply your changes.
You need to check Enable web client certificate validation firstly for OCSP
to take effect.
Use HTTP protocol to access website
In addition to HTTPS, you can now access the website using HTTP protocol.
To enable HTTP protocol for server website:
1 Go to Configuration > Certificate Management.
2 Select Enable HTTP protocol for Server Website check box under Client Certificate.
3 Click OK.
Configure QoS
QoS (Quality of Service) is very important in transmission of high-bandwidth audio and video data. You can
use QoS to test and guarantee the following settings:
● Average packet delay
● Delay variation (jitter)
● Error rate
To specify QoS parameters:
1 Go to Configuration > QoS.
2 Configure the following settings:
QoS parameters
Polycom, Inc.
38
Download from Www.Somanuals.com. All Manuals Search And Download.
System Configuration
Parameter
Description
Enable QoS for Signaling and
Media
Enable configuration of the QoS settings. if not selected, the system uses
the default QoS settings.
Type
DiffServ and Precedence are two methods for encoding packet priority. The
priority set here for audio and video packets should match the priority set in
the network routers.
•
Differv: Select when the network router uses Differv for priority
encoding. If this option is selected, enter values in the Audio and Video
fields. The value range is 0-63.
Note: If you select DiffServ but your router does not support this
standard, IP packets queue on the same communication links with data
packets. This non-prioritized queueing greatly increases the latency and
jitters in their delivery and can negatively impact performance.
•
Precedence: Select this option when the network router uses
Precedence for priority encoding, or when you are not sure which
method is used by the router. Precedence should be matched with None
in the ToS field. The value range is 0-5. If this option is selected, enter
values in the Audio and Video fields. The value range is 0-5.
Note: Precedence is the default mode as it is capable of providing
priority services to all types of routers and is currently the most common
mechanism.
Audio / Video
Specify the priority for audio and video IP packets.
The recommended priority is 4 for audio and video to ensure that the packet
delay for both is the same, that audio and video packets are synchronized,
and to ensure lip and audio synchronization (lip sync).
Control
ToS
Specify the priority for controlling packets.
Select the ToS (Type of Service) that defines optimization tagging for routing
the conference audio and video packets.
•
Delay: The recommended default for video conferencing: prioritized
audio and video packets tagged with this definition are delivered with
minimal delay.
•
None: No optimization definition is applied. This is a compatibility mode
in which routing is based on Precedence priority settings only. Select
None if you do not know which standard your router supports.
3 Click OK. The server restarts to apply your changes.
QoS settings applies to SIP and H.323 calls only, it does not apply to
streaming.
Configure SNMP
Your system provides a standard SNMP (Simple Network Management Protocol) interface which supports
SNMP version 1, version 2, and version 3 queries with confidentiality, authentication, and integrity functions
Polycom, Inc.
39
Download from Www.Somanuals.com. All Manuals Search And Download.
System Configuration
conforming to SNMP MIB. The interface uses a common MIB, making it interoperable with Polycom CMA,
DMA, and RMX systems.
•
Available configurable options vary with the SNMP agent version and security
level selected.
•
RealPresence Capture Server does not support SNMP trap.
To configure SNMP settings:
1 Click Configuration > SNMP.
2 Select Enable SNMP.
SNMP is disabled by default.
3 Configure the following agent parameters:
SNMP Parameters
Parameter
Description
Retrieve MIB Files
Agent Name
Retrieve MIB file to your computer.
Specify the name of this RealPresence Capture Server agent.
Specify the contact country for this RealPresence Capture Server.
Specify a contact person for this RealPresence Capture Server.
Specify the SNMP Agent version.
Contact Country
Contact Person
SNMP Agent Version
4 Configure the following security settings:
Security Settings
Parameter
Description
Accepted Host Community Name
User Name
Specify the community name that the host belongs to.
Specify the user name that will be used to log in over the Authentication
Protocol.
Authentication Protocol
Authentication Password
Specify the type of encryption to use when connecting with this user:
•
•
MD5: Message Digest 5
SHA: Secure Hash Algorithm
Specify the password that will be used to log in over the Authentication
Protocol.
Note: A valid password contains 8-64 characters, and not include these
characters: &,',",<,>,%,|,+,=
Polycom, Inc.
40
Download from Www.Somanuals.com. All Manuals Search And Download.
System Configuration
Privacy Protocol
Specify the privacy protocol that you want to use:
•
•
DES: Data Encryption Standard
AES: Advanced Encryption Standard
Privacy Password
Specify the password that will be used to log in over the privacy protocol.
Note: A valid password contains 8-64 characters, and not include these
characters: &,',",<,>,%,|,+,=
Notice about Using Polycom SNMP MIB Files
Besides standard SNMP MIB files, RealPresence Capture Server also provides two proprietary MIB files:
● POLYCOM-BASE-MIB.mib
● POLYCOM-REAL-PRESENCE-MONITORING-MIB.mib
To use these Polycom MIB files, please first import the file POLYCOM-BASE-MIB.mib, then
POLYCOM-REAL-PRESENCE-MONITORING-MIB.mib. Otherwise, the Polycom MIB files cannot be
correctly compiled.
All RealPresence Capture Server MIB files can be downloaded from the Admin Interface Configuration >
SNMP > Retrieve MIB Files.
Diagnostics
You can use Ping to verify that the RealPresence Capture Server system can communicate with another
node in the network.
To run Ping on the RealPresence Capture Server system:
1 Go to Configuration > Diagnostics.
2 Enter an IP Address or Host Name and click Ping.
3 You will see the ping response shown in the ping result.
Active Directory
The Polycom RealPresence Capture Server system supports integration with a single Active Directory
server.
After the integration, users in the Active Directory domain can access the Admin Portal or User Portal of the
Polycom RealPresence Capture Server system directly as ordinary users without needing to be registered
directly in the Capture Server system user database.
To configure an Active Directory server
1 Go to Configuration > Active Directory.
2 Configure the following settings:
Polycom, Inc.
41
Download from Www.Somanuals.com. All Manuals Search And Download.
System Configuration
Parameter
Description
Enable Active Directory
Active Directory Address
Specify whether to enable Active Directory functionality for this system.
Set the IP address or domain name of the Active Directory server to be
integrated.
Note: If you set a domain name, make sure you have already set a DNS
server address that can resolve this domain name in Configuration > IP
Settings.
Active Directory Port
Active Directory User
Specify the port number for the Active Directory, the default value is 636.
Set the user name that will be used by the Polycom Capture Server system to
access resources on the Active Directory server.
Active Directory Password
Active Directory Base DN
Set the user password that will be used by the Polycom Capture Server
system to access resources on the Active Directory server.
Can be used to restrict the Capture Server system to work with a subset of
the Active Directory (such as one tree of multiple trees, a subtree, or a
domain). Leave the default setting, All Domains, initially.
Enable SSL Connection
Specify whether to enable SSL encryption for the communication between
the RealPresence Capture Server system and the AD server.
Synchronize AD Time Point
Test
Specify when to synchronize AD data on a daily basis.
Test whether the Active Directory server is reachable.
3 Click OK
When the RealPresence Capture Server system is connected to the Active Directory server, Active
Directory Status on the page displays Connected.
If the system is configured with an Active Directory server, users defined on the
Active Directory can log in to the Polycom RealPresence Capture Server system as
ordinary users. When logging in to the Polycom RealPresence Capture Server
system’s Admin Portal using an existing domain user, the user gets only ordinary
user permissions.
Password Settings
Go to Configuration > Password Settings you can manage your password, learn how to change the
security policies that control what kind of password you use and how often you have to change it.
Security Policy Parameters
LS
Parameter
Description
Polycom, Inc.
42
Download from Www.Somanuals.com. All Manuals Search And Download.
System Configuration
Password
Management
Password Expired Warning
Period
Specify how far in advance the system displays a
warning that the password will soon expire, if a
maximum password age is set.
Default: 10 (days)
Maximum Password Age
Minimum Password Age
Reuse Number of Password
Specify the maximum number of days that can pass
before the password must be changed.
Default: 90 (days)
Specify the minimum number of days that must pass
before the password can be changed.
Default: 0
Specify the number of most recent passwords that
cannot be reused. For example, if set to 2, the last
two passwords cannot be reused.
Default: 0
Password
Complexity
Allow to contain or reverse User
ID
Specify whether to allow a valid password to contain
the same characters, in the same order or reversed,
as the user name.
Minimum Password Length
Specify the minimum number of characters required
for a valid password.
Default: 1 (day)
Minimum Password Changed
Characters
Specify the number of characters that must be
different or in a different position in a new password.
If this is set to 3, “123abc” can change to “345cde”
but not to “234bcd”.
Default: 0
Maximum Consecutive Repeated
Characters
Specify the maximum number of consecutive
repeated characters in a valid password. If this is set
to 3, “aaa123” is a valid password but “aaaa123” is
not.
Default: 0
Minimum Upper Case
Specify the minimum number of uppercase
characters required for a valid password.
Default: 0
Minimum Lower Case
Specify the minimum number of lowercase
characters required for a valid password.
Default: 0
Minimum Numeric Characters
Minimum Special Characters
Specify the minimum number of numbers required for
a valid password.
Default: 0
Specify the minimum number of special characters
required for a valid password. Supported characters
include the characters displayed in the Special
Characters Set field.
Default: 0
Polycom, Inc.
43
Download from Www.Somanuals.com. All Manuals Search And Download.
System Configuration
The value 0 indicates no limitation to this option.
UI Customization
You can personalize the system appearance, for example, set the IVR information and set an e-mail address
for your RealPresence Capture Server system
Customize IVR Information
The RealPresence Capture Server system provides IVR (Interactive Voice Response) service. After the call
to capture server is connected, the IVR will provide guide information to the user on the event happening at
the capture server.
To customize the IVR information:
1 Go to Configuration > Customization.
2 Select the IVR information to be played and corresponding language option.
3 Click Upload.
The audio file to be uploaded must be in PCM format, and the sampling frequency must be 16KHz,
16bit, and mono.
4 Click Add, select the audio file and click Open.
5 Click OK.
Polycom, Inc.
44
Download from Www.Somanuals.com. All Manuals Search And Download.
System Configuration
Default IVR Messages
Message Type
Message Text
When Played
Welcome
Welcome to conference record
playback service.
When join the recording service
where Start Recording Immediately
is disabled.
Recording Started
Recording Stopped
Recording Paused
Recording Resumed
Disk Warning
Conference recording has started.
The conference recording has ended.
The conference recording has
started.
The conference recording has ended.
The conference recording is now
paused.
The conference recording is paused.
The conference recording is now
resumed.
The conference recording is
resumed.
You have exceeded your allocated disk
space.
When there is not enough disk space
to make recordings.
Call will be ended soon
Playback Ended
The conference recording will end in
another 10 minutes.
The conference recording is about to
end in 10 minutes.
Your playback has ended.
When the playback is ended.
Playback not allowed
You are not allowed to play back this
archive.
You do not have permission to play
back the archive after three failed
attempts to input personal code.
Playback not processed
Playback paused
Sorry, your playback request can not be
processed.
When play back an invalid archive.
When the playback is paused.
When the playback is stopped
Your playback is paused.
Playback stopped
Your playback is stopped.
Playback session timeout
Your session has timed out, your call
will hang up.
When play back an archive with
enabled PIN code protection, if you
do not input PIN code within 15
seconds or if the playback is paused
for five minutes.
Input personal code
Invalid personal code
Please enter your personal code and
then press the pound key.
When play back an archive under PIN
code protection.
Invalid personal code, please try again.
When play back an archive with
invalid PIN code.
Customizing UI Logo
You can customize the logo displayed on both Admin Portal and User Portal.
Polycom, Inc.
45
Download from Www.Somanuals.com. All Manuals Search And Download.
System Configuration
To customize the Logo picture of the web Management interface:
1 Go to Configuration > Customization.
2 In the Logo area, click Change Logo > Add to select the picture to be uploaded.
3 The uploaded pictures must be in the *.png format, with 201 * 54 pixels.
4 Click Open > Upload.
5 Click OK.
Setup E-mail
You can set an e-mail address for your RealPresence Capture Server system. This is filled to “From”
address in the e-mail the system sent out.
To set an e-mail address for the RealPresence Capture Server system:
1 Go to Configuration > Customization.
2 Configure the following settings:
Admin Email Settings
Sender Email: This is filled to “From” address in the email the system sent out.
Frequency: Select the period for automatic e-mail notification.
Receiver Email: The email is sent when there is administrative event occurs, like disk
warning, alert, etc.
Service Email Settings
Enable Emaill Notifications: When enabled, you will receive e-mail notification when live
streaming starts or archive is ready for VoD.
Portal Settings
•
When using Polycom RealPresence Media Manager or other external portal to allow users to access live
and on-demand streams, it is a best practice to redirect visitors from the Capture Server's User Portal to
the Media Manager (or 3rd party portal) home page.
•
•
You can also manage session idle timeout and maximum number of login for both Admin and User
Portal.
You can select to show both internal and external live streaming URL.
Polycom, Inc.
46
Download from Www.Somanuals.com. All Manuals Search And Download.
System Configuration
Portal Setting Configuration
Parameter
Description
Redirect Settings
Redirect users
attempting to connect
to User Portal
Enter a URL for visitors to redirect from Capture Server’s
User Portal to the Media Manager (or 3rd party portal)
home page.
(https://Capture_Serve
r/portal) to the
following URL:
Test
Test whether the URL works.
Disable view
permission of user
portal for guest user
This is enabled by default and as a result, guest users on
User Portal do not have view permission.
Session Management
Admin Portal
•
•
Session Idle Timeout: specifies the number of
minutes an Admin Portal session can be idle before the
server cancels the session. The default value is 30.
Session Maximum Number Per Application: The
maximum number of Admin Portal login. The default
value is 200
User Portal
•
•
Session Idle Timeout: specifies the number of
minutes a User Portal session can be idle before the
server cancels the session. The default value is 30.
Session Maximum Number Per Application: The
maximum number of User Portal login (including
anonymous login). The default value is 3000.
Streaming URL Settings
Show both internal and
external live streaming
URL
When selected, portal will show both external media
server’s live stream URL and Capture Server’s native
stream URL. By default this option is unchecked and only
external media server’s live stream URL is shown.
Polycom, Inc.
47
Download from Www.Somanuals.com. All Manuals Search And Download.
Record and Playback
Configure Templates
A template is used to define a set of basic recording parameters, such as call rate of recording, video quality,
whether to live stream and streaming rate. All Virtual Recording Rooms (VRR) are created based on
templates. Changing parameters of a template may change the corresponding recording policies of the VRR
using that template.
Configure Recording Templates
In this section you’ll learn how to configure recording templates, including how to view, define, edit or delete
a recording template.
To view a recording template:
» Go to Template > Recording Templates.
To define a recording template:
1 Go to Template > Recording Templates.
2 Click Add.
3 Configure the following settings:
Recording Template
Parameter
Description
Template Name
Enable Live Streaming
Disable Recording
Specify a unique name to identify this template.
Enable live streaming for the calls that use this template.
This setting is available when Enable Live Streaming is selected. When this is
selected, the call will be live streamed only, without recording.
Enable Multicast
Specify whether to enable multicast for the recording template.
If Auto Multicast for Live Streaming isn’t enabled in system configuration,
users can enable multicast for this template.
Multicast TTL (available after
multicast is enabled)
Choose from the drop-down list.
The default TTL value is Auto -- Use System Setting.
Note: The template value set here will override the system value.
Polycom, Inc.
48
Download from Www.Somanuals.com. All Manuals Search And Download.
Record and Playback
Enable PIN
Specify whether to enable PIN code protection for the archive.
If a PIN code is set, you must enter the correct PIN code to play the live streams
or archives created using this VRR.
After this option is selected, you must enter a PIN code consisting of 1-16 digits
in PIN Code.
Call
Audio Only
Select this check box to define the recording for the call with this template has
only audio capability, no matter the call rate negotiated.
Max Call Rate
Specify the maximum bandwidth that can be used by an endpoint or MCU to
connect to the RealPresence Capture Server system for recording and live
streaming.
Max Resolution
Enable LPR
Specify the maximum resolution of people video that can be used to connect to
the RealPresence Capture Server system for recording and live streaming.
Once this function is selected, in case of packet loss during network
transmission, it can effectively improve the decreased video quality caused by
packet loss.
Indication Tone
Played to indicate that recording is ongoing, typically it is a very short beep with
intervals between beeps, measured in second. This is enabled by default.
Media Encryption Type
If the Capture Server is licensed for call encryption, this option specifies how
AES (Advanced Encryption Standard) encryption is enabled and SIP
connections:
•
Required For All Calls: Enable the AES encryption for all H.323 and SIP
calls, including video and audio only calls. This option requires the device to
connect the system with AES enabled, otherwise, the connection cannot be
set up.
•
•
When Available: Both encrypted and non-encrypted undefined participants
can connect to the same conferences, where encryption is the preferred
setting.
Off: Disable the AES encryption and SIP connections.
Note: The Media Encryption Type available here is consistent with that set under
Set Recording Parameters. The encryption change is applied to new calls only
and does not impact the archive.
Max Call Length
Specifies the maximum call length for recording or live streaming calls. The
default option is Auto (When selected, the max call length setting will be the
same as configured under Configuration > Call Settings).
Note: The template value set here will override the system value set under
Configuration > Call Settings on Admin Portal.
Conference Layout (RMX 8.4 or
higher)
Specify the people layout received and recorded from MCU. The 1x1 and 1x2
layout may give focus on the speaker of the conference in the recording.
•
Auto: Automatic layout according to conference setting at RMX side to
recording server.
•
•
1x1: Single view to recording server.
1x2: Dual view to recording server.
Archiving
Polycom, Inc.
49
Download from Www.Somanuals.com. All Manuals Search And Download.
Record and Playback
Start Recording Immediately
If this option is selected, the system immediately starts recording with this
recording template. If deselected, you may need to manually start recording
through the Admin Portal or the TV UI.
Archive Name Prefix
Live Streaming (MP4)
Specify the prefix of the output media archive name.
Enable H.264 High Profile for
Live Streaming
Select this check box to enable the use of H.264 High Profile in Video Switching
conferences.
Primary Streaming Rate (Kbps)
The default value is 1024 kbps.
Once the streaming rate is set, you can define a name for this streaming.
Secondary Streaming Rate
(Kbps)
The default value is Off.
After a streaming rate is set here, you can define a name for this streaming.
Layout
Specify the layout for displaying people and content videos when transcoding
dual stream. Users can choose from the following layouts:
•
•
•
•
Single window with small content (People 75%; Content 25%): Displays
dual stream in one window of which 75% is people video and 25% content
video.
Single window with medium content in right (People 50%; Content 50%)
Displays dual stream in one window of which 50% is people video and 50%
content video at the right side.
Single window with medium content in left (People 50%; Content 50%)
Displays dual stream in one window of which 50% is people video and 50%
content video at the left side.
Single window with large content (People 25%; Content 75%): Displays
dual stream in one window of which 25% is people video and 75% content
video.
•
•
Single window with people only (content not shown): Displays people
video only in one window with no content.
Single window with people or content (when content active): When
people and content videos coexist, content video takes priority, people video
displays only when content is absent.
Live Streaming (WMV)
Primary Streaming Rate (Kbps)
The default value is Off.
Once the streaming rate is set, you can define a name for this streaming.
Polycom, Inc.
50
Download from Www.Somanuals.com. All Manuals Search And Download.
Record and Playback
Secondary Streaming Rate
(Kbps)
The default value is Off.
Once the streaming rate is set, you can define a name for this streaming.
Layout
Specify the layout for displaying people and content videos when transcoding
dual stream. Users can choose from the following layouts:
•
•
•
•
Single window with small content (People 75%; Content 25%): Displays
dual stream in one window of which 75% is people video and 25% content
video.
Single window with medium content in right (People 50%; Content 50%)
Displays dual stream in one window of which 50% is people video and 50%
content video.
Single window with medium content in left (People 50%; Content 50%)
Displays dual stream in one window of which 50% is people video and 50%
content video.
Single window with large content (People 25%; Content 75%): Displays
dual stream in one window of which 25% is people video and 75% content
video.
•
•
Single window with people only (content not shown): Displays people
video only in one window with no content.
Single window with people or content (when content active): When
people and content videos coexist, content video takes priority, people video
displays only when content is absent.
•
Dual window for content (when inactive content, it is black): The stream
supports dual windows on Windows Media Player, one for people video, the
other for content video, black screen displays when content is absent.
4 Click OK.
You can click Save As to clone a new template with the same settings.
To edit or delete a recording template:
1 Go to Template > Recording Templates.
2 Click the recording template you want to change.
3 Click Edit or Delete.
Max Call Length
Maximum call length is used to restrict the call length for recording and streaming calls due to the following
reasons:
● When record a meeting, the recording call may be endless (to RMX for example) and thus flood the
disk for unused data.
● A recording longer than 8 hours is difficult to be offline-transcoded.
● An endless streaming only session will cost transcoding resource occupancy.
To set max call length for recording and streaming calls
1 Go to Template > Recording Templates.
2 Select the recording template you want to change.
Polycom, Inc.
51
Download from Www.Somanuals.com. All Manuals Search And Download.
Record and Playback
3 Click Edit.
4 Choose a value from the Max Call Length drop-down list.
•
•
•
The max call length is a guard timer used to automatically stop recording and
disconnect to the recording client when timer times out. This is helpful to avoid
flooding the disk if recording server fails to end the call after the recording event.
For a recording call (with or without live streaming), the default setting is 2 hours,
range is 1-8 hours; for live streaming only calls, default setting is 8 hours and there
is no limitation to max range
When a call is approaching the max call length, an IVR message will be sent to
user as a reminder.
To set max call length for streaming only calls:
1 Go to Template > Recording Templates.
2 Click the recording template you want to change.
3 Click Edit.
4 Select Disable Recording.
5 Clear Auto underneath Max call Length.
6 Enter your desired value.
Note: Input positive numbers and the value 0 indicates no limitation to this option.
Configure Transcoding Templates
In this section you’ll learn how to configure transcoding templates, including how to view, define, edit or
delete a transcoding template, you can also learn how to replicate transcoding templates for external media
servers.
To define a transcoding template:
1 Go to Template > Transcoding Templates.
2 Click Add.
3 Configure the following settings:
Transcoding Template
Parameter
Description
Template Name
Media Type
Bit Rate
Specify a unique name to identify this template.
Specify the output media file format.
Specify the output media file bitrate.
The video protocol used by the archive.
Specify the media frame rate.
Video Type
Frame Rate
Max Resolution
Specify the maximum transcoding resolution.
Polycom, Inc.
52
Download from Www.Somanuals.com. All Manuals Search And Download.
Record and Playback
Aspect Ratio
Layout
Specify the aspect ratio of the output media file.
Specify the layout for displaying people and content videos when transcoding
dual stream. Users can choose from the following layouts:
•
•
•
•
Single window with small content (people 75%; content 25%): Displays
dual stream in one window of which 75% is people video and 25% content
video.
Single window with medium content in right (People 50%; Content 50%)
Displays dual stream in one window of which 50% is people video and 50%
content video.
Single window with medium content in left (People 50%; Content 50%)
Displays dual stream in one window of which 50% is people video and 50%
content video.
Single window with large content (people 25%; content 75%): Displays
dual stream in one window of which 25% is people video and 75% content
video.
•
•
Single window with people only (content not shown): Displays people
video only in one window with no content.
Single window with people or content (when content active): When people
and content videos coexist, content video takes priority, people video displays
only when content is absent.
•
Dual window for content (when inactive content, it is black): The stream
supports dual windows on Windows Media Player, one for people video, the
other for content video, black screen displays when content is absent.
Note: This option is only available when you set Media Type as WMV.
Enable VOD Timecode
watermarking
Specify whether to enable Timecode (GMT) Watermarking functionality for VoD.
Transfer to Media Server
For ISM format, you can transfer media files to IIS Media Server. For MP4 format,
transfer media files to WOWZA server. For WMV format, transfer to Windows
Media Server.
For external media server configuration details, refer to Appendix B.
Specify whether to generate snapshots for transcoded media files.
Delete the duplicate snapshots resulted during thumbnail generation process.
Snapshot Enable
Remove Duplicate Thumbnail
Enable auto snapshot during
entire call
When enabled, snapshots could be generated automatically throughout the entire
call.
Start Time
End Time
Interval
Select the start time for the automatic snapshot.
Select the end time for the automatic snapshot.
Set the snapshot interval, measured in second.
4 Click OK.
You can click Save As to clone a new template with the same settings.
Polycom, Inc.
53
Download from Www.Somanuals.com. All Manuals Search And Download.
Record and Playback
You can find some preconfigured templates for iOS and Android as follows:
Preconfigured Templates for iOS
Template
Name
Resolution
Frame Rate
Bitrate
Aspect Ratio
Device
Profile
Iphone_M_2
640*480
30
1296
4:3
iPhone4 &
above
Baseline
Iphone_S_2
Ipad_L
480*360
15
30
30
30
464
1M
4:3
iPhone4 &
above
Baseline
Baseline
Baseline
High Profile
1024*768
640*360
16:9
16:9
16:9
iPad 2, iPad
mini
Iphone_M_1
Ipad_H
664
1.7M
iPhone4 &
above
1920*1080
New iPad,
iPad Retina
Display
Iphone_S_1
480*270
15
464
16:9
iPhone4 &
above
Baseline
Preconfigured Templates for Android
Template
Bitrate
(Kbps)
Name
Resolution
Frame Rate
Profile
SD_H
480*360
30
500
Baseline
SD_L
HD
176*144
12
30
56
Baseline
Baseline
1280*720
2M
To view a transcoding template:
» Go to Template > Transcoding Templates.
To configure a transcoding template for IIS media server:
1 Go to Template > Transcoding Templates.
2 Click Add.
3 Select ISM for Media Type.
4 Select the IIS media server you configured in Transfer to Media Server field.
Polycom, Inc.
54
Download from Www.Somanuals.com. All Manuals Search And Download.
Record and Playback
To configure a transcoding template for WOWZA media server:
1 Go to Template > Transcoding Templates.
2 Click Add.
3 Select MP4 for Media Type.
4 Select the WOWZA media server you configured in Transfer to Media Server field.
To edit or delete a transcoding template:
1 Go to Template > Transcoding Templates.
2 Click the transcoding template you want to change.
3 Click Edit or Delete.
Configure VRRs
A VRR defines recording parameters. You can create a VRR basing on recording templates. A VRR is
identified by digits, and you can directly start recording using a specified VRR by adding the VRR number
to the dial-in number.
A default VRR, named DefaultVRR, is built in the system. When an endpoint or MCU
tries to connect by dialing the RealPresence Capture Server without VRR number
specified, default VRR parameters are used. You can modify the default VRR but
cannot delete it.
To define a VRR:
1 Go to Template > VRRs.
2 Click Add.
3 Configure the following settings (* indicates mandatory parameters).
VRR Parameters
Parameter
Description
VRR Name
Specify a unique name to identify the VRR. You can also use the default
name generated by the system.
VRR Number
Specify a number to identify the VRR. You can directly dial the VRR to record
by adding the VRR number when dialing the RealPresence Capture Server
system. The number you entered must be unique and comprised of 4-8 digits.
You can also use the number automatically generated by the system.
Note: The initial digit of the VRR number cannot be zero.
Description
If necessary, you can enter additional VRR information, such as the owner
and usage, in order to improve identification and classification management
when there are many VRRs.
Recording Template
Specify the recording template. The template defines the basic recording link
parameters.
Polycom, Inc.
55
Download from Www.Somanuals.com. All Manuals Search And Download.
Record and Playback
Transcoding Template
After recording is done, the system will do offline transcoding according to
transcoding templates configured here. Multiple offline transcoding outputs
are allowed.
Note: Only qualified transcoding template will apply. If the template
parameters is higher than recorded raw parameters, then the template will be
ignored. For example, if recording raw resolution (e.g. 4CIF) is less than
transcoding template (e.g. 720p), then this transcoding template will be
ignored.
Live Streaming Server
You can check configured live streaming server information including publish
point template, stream alias, and streaming list.
Email Address (separated by ‘,’)
Once the live streaming is started or the VRR recorded video has completed
its format conversion and is ready for viewing, the system sends an e-mail
message to the address set here.
4 Click OK.
You can click Save As to clone a VRR with the same settings.
To add publishing points for external media servers:
1 Go to Template > VRRs.
2 Select a VRR and click Edit.
3 Click
, select a live streaming server you configured.
4 Enter values in the Publish Point Template field.
5 Fill in an alias for this stream.
6 Select a live streaming bitrate.
For external or AKAMAI media server configuration details, refer to Appendix B.
7 Click
Always click Save before clicking OK; otherwise the entered data will be lost.
8 Click OK.
.
To edit or delete a VRR:
1 Go to Template > VRRs.
2 Click the VRR entry you want to edit or delete.
3 Click Edit or Delete.
Start a Recording
You can start recording in RealPresence Capture Server using one of the following methods:
● Call from RealPresence Capture Server to an interoperable endpoint from Admin Portal.
● Call from RealPresence Capture Server to an interoperable endpoint from User Portal
● Call RealPresence Capture Server from an interoperable endpoint.
● Start a recording from Polycom RMX system via recording link.
Polycom, Inc.
56
Download from Www.Somanuals.com. All Manuals Search And Download.
Record and Playback
● Schedule a meeting on RealPresence Media Manager and connect the RealPresence Capture
Server to an endpoint.
To start a recording from the Admin Portal:
1 Access Capture Server admin portal by its IP address or host domain name from a compatible
browser.
2 Enter the user name and password to log in to the system.
3 Go to Home. In the Signaling Connection area, click Dial out to record.
4 Configure the following settings:
Dial Out Parameters
Parameter
Description
Address
Specify the calling address.
The system supports entering the calling address with an extended service
number in the address box.
If you call a H.323 system, you can dial out to endpoints by entering the numbers
in the following formats:
•
•
•
[far end E.164 prefix] - Use when every system has registered to a gatekeeper.
For example, if a far end system E.164 prefix is 9988.
[Far End H.323 ID]- Use when every system has registered to a gatekeeper.
For example, if a far end system H.323 ID is CS9988.
[Far End IP Address]- Use when a system has not been registered to a
gatekeeper.
For example, if a far end system IP address is 172.22.33.44.
Signal
Set the H.323 or SIP network type for the system to place a call. Your choice
depends on the call type used by the peer device.
VRR Name
Click Select to select a virtual recording room (VRR). You can use the built-in
default VRR, or one you have created.
Event Name
Specify a unique name for this event.
Max Call Rate (Kbps)
Display the maximum call rate specified in VRR
5 Click OK.
Unlike administrators, normal users can only view and manage calls started by
themselves.
Dial in from Endpoint
You can start recording by dialing RealPresence Capture Server or dial in to a VRR directly to start
recording.
Polycom, Inc.
57
Download from Www.Somanuals.com. All Manuals Search And Download.
Record and Playback
To start recording by dialing RealPresence Capture Server:
» Enter the E.164 prefix or H.323 ID or SIP URL of RealPresence Capture Server on the user interface
of an interoperable endpoint, for example, from remote control of HDX or Group Series.
If your system or endpoint is not registered to the gatekeeper or to a SIP server, call the system IP
address instead.
You can also dial in to a VRR directly to start recording by dialing one of the following:
For H.323 calls
● [RealPresence Capture Server IP]##[VRR number]
For example, if the RealPresence Capture Server IP is 11.12.13.14, and the VRR
number is 4096, dial 11.12.13.14##4096.
● [RealPresence Capture Server E.164 prefix][VRR number]
For example, if the RealPresence Capture Server E.164 prefix number is 8888, and the VRR number
is 4096, dial 88884096.
For SIP calls
● [VRR number]@[RealPresence Capture Server IP]
For example, if the RealPresence Capture Server IP is 11.12.13.14, and the VRR
● [SIP peer prefix][VRR number]
If the system has been registered to a SIP server, the SIP server should configure CaptureServer as
a SIP peer. For example, if the SIP peer prefix of the Polycom RealPresence Capture Server system
is 8888 and the VRR number is 4096, the dial string should be 88884096.
Record from RMX via Recording Link
Capture Server can automatically record, or automatic record and stream, when RealPresence
Collaboration Server (RMX Series) is configured with a Capture Server Recording Link has enable in RMX
Conference Profile. Refer to the Collaboration Server (RMX Series) Getting Started Guide and
Administrator’s Guide.
Change Conference Layout for RMX Hosted Calls
Once the Capture Server Recording Link is enabled on RealPresence Collaboration Server system (version
8.4 or higher), a user dials into a conference hosted on RealPresence Collaboration Server, the layout can
be changed once Capture Server is connected when configured with SIP calls only.
To set conference layout type in a recording template
1 Go to Template > Recording Templates.
2 Select a recording template you want to edit.
3 Click Edit.
4 Choose from the Conference Layout drop-down list:
Auto: Automatic layout according to conference setting at RMX side to recording server
1x1: Single view to recording server.
Polycom, Inc.
58
Download from Www.Somanuals.com. All Manuals Search And Download.
Record and Playback
1x2: Dual view to recording server.
To change conference layout type for an ongoing call
1 On Capture Server Admin Portal, go to Signaling Connection and click
2 Choose from the following layouts:
Auto: Automatic layout according to conference setting at RMX side to recording server.
1x1: Single view to recording server.
1x2: Dual view to recording server.
When an endpoint or MCU tries to connect by directly dialing the IP address or
E.164 prefix of the RealPresence Capture Server system, the default VRR
parameters are used to record. You can directly start recording using recording
parameters defined in a VRR by adding the VRR number to the dial-in number.
If the RealPresence Capture Server system is configured in connection with a
Polycom RMX series system through the recording link, you can specify the VRR to
be used by adding the VRR number in the Recording Link field on the Polycom
RMX system. For more information, refer to the Polycom RMX system
Administrator’s Guide.
For prefix+VRR format, you need to add SIP Peer to Polycom DMA server, for
details, refer to the Polycom DMA server’s Administrator’s Guide.
With the newly added Annex-O support, you can start recording by dialing one of
the following:
• For incoming calls to Capture Server, the dial-in number is [VRR
number]@[RealPresence Capture Server IP address].
• If you call from RealPresence Capture Server to an interoperable endpoint such
as Polycom HDX Series system, the dial-out number is [RealPresence Capture
Server E.164 suffix]@[HDX IP Address] or [RealPresence Capture Server H.323
ID]@[HDX IP Address]
• If you call from RealPresence Capture Server to a MCU, the dial-out number is
[Conference ID]@[RMX IP Address]
Point-to-point Recording
Point-to-point recording allows a user to dial out to two endpoints from the Capture Server Admin Portal or
User Portal, and record the two sites into same recording file.
To start point-to-point recording from Admin Portal
1 In the address line, enter the system’s IP address in this format: https://<system IP address>/admin.
2 Enter the user name and password to log in to the system.
3 Go to Home or Call. In the Signaling Connection area, click 2 Sites Recording.
4 Enter the addresses of the two H.323 endpoint participants.
5 Click OK.
Polycom, Inc.
59
Download from Www.Somanuals.com. All Manuals Search And Download.
Record and Playback
•
•
For now it is only available in H.323 point-to-point calls.
Video Call Playback
This section introduces how to play back video files for both dial-in and dial-out calls.
Video Call Play Back when Dialing in from Endpoint
You can play back recorded media archives stored in RealPresence Capture Server using Quick Code. A
quick code is generated automatically for every archive after the system completes a recording.
To view the quick code of an archive from Admin Portal
1 Go to Media > Archives.
2 The quick code is displayed in the Quick Code column.
If you need to view the quick code of an archive from User Portal, log in to the User
Portal firstly, the quick code is displayed beneath the archive names.
To edit the quick code of an archive:
1 Go to Media > Archives.
2 Select an archive.
3 Click Edit.
4 Edit the quick code in Quick Code text filed.
5 Click OK.
To play back archives using the quick code:
» Dial using one of the following formats:
A quick code consists of 7 digits that start with the number 0. If the archive has
multiple episodes, you can append the two-digit episode index to the seven-digit
quick code in your dial string.
H.323:
If the system has been registered to a gatekeeper, dial [Capture Server E.164 prefix][Quick
Code]
For example, if the E.164 prefix of the Polycom RealPresence Capture Server system is 1234
and the quick code of the file to be played back is 0123456, dial 12340123456
Polycom, Inc.
60
Download from Www.Somanuals.com. All Manuals Search And Download.
Record and Playback
If the system has not been registered to a gatekeeper, dial [RSS IP address]##[Quick Code]
For example, if the IP address of the Polycom RealPresence Capture Server system is
10.1.2.3 and the quick code of the file to be played back is 0123456, dial 10.1.2.3##0123456
SIP:
If the system has been registered to a SIP server, the SIP server should configure
CaptureServer as a SIP peer, dial [SIP Peer Prefix][Quick code].
For example, if the SIP peer prefix of the Polycom RealPresence Capture Server system is
1234 and the quick code of the file to be played back is 0123456, dial 12340123456.
If the system has not been registered to a SIP server, dial [Quick Code]@[RSS IP address]
For example, if the IP address of the Polycom RealPresence Capture Server system is
10.1.2.3 and the quick code of the file to be played back is 0123456, dial [email protected]
If you want to play back the second episode of the archive, you can replace the quick code in
above dial string by appending episode index, such as replace [email protected] with
•
•
If no press on your part, it will begin playing the next episode automatically 30
seconds after the end of the previous one.
Once the archive playback is completed, Capture Server will drop from the
multipoint call within five minutes if no command is given.
•
•
Capture Server will terminate the call five minutes after the playback is paused.
If the capacity supports 40 recordings only, the Quick Code playback function is
not supported.
Video Call Playback when Dialing out from Capture Server
RMX Playback (RMX 8.5 or higher)
If the Capture Server system dials into a conference hosted on RealPresence Collaboration Server, the
layout can be changed once Capture Server is connected when configured with SIP calls only.
To start a playback call:
1 On Capture Server Admin Portal, go to Media > Archives.
2 Select an archive and click Playback.
3 Fill in the IP address.
4 Choose a signaling protocol.
5 Choose from the following layouts:
Auto: Automatic layout according to conference setting at RMX side to recording server
Lecture: The playback video is viewed in full screen by all conference participants.
6 Choose an episode from the drop-down list.
7 Click OK.
•
•
Once the archive playback is completed, Capture Server will drop from the
multipoint call within five minutes if no command is given.
Capture Server will terminate the call five minutes after the playback is paused.
Polycom, Inc.
61
Download from Www.Somanuals.com. All Manuals Search And Download.
Record and Playback
When video call play back to RMX, the conference layout type can be changed. You can reuse the current
overview.
To change conference layout type for an ongoing call
1 Go to Signaling Connection and click
2 Choose from the following layouts:
Auto: Automatic layout according to conference setting at RMX side to recording server.
Lecture: The lecturer is viewed in full screen by all conference participants, while the audience is
“time-switched” in the speaker’s view.
It’s for SIP calls only.
Polycom, Inc.
62
Download from Www.Somanuals.com. All Manuals Search And Download.
Live Streaming
The RealPresence Capture Server system supports live streaming of video sources, such as live video
conference or dual stream sent by endpoints or MCUs with a highest resolution of 1080p and a maximum
bandwidth of 4M. Those live streaming videos are saved in the system.
Live streaming supports dual streaming rates; this allows you to choose the appropriate bandwidth to view
video based on your network condition.
Multi-bitrate Live Streaming
If the recording template is configured, the Capture Server system could send a specific resolution live
stream to low bandwidth sites and a higher quality resolution live stream to high bandwidth sites without
creating separate video broadcasts.
To live stream meetings to an external server, follow these steps:
1 Configure the external media server on the RealPresence Capture Server system and enable live
streaming.
2 Configure a recording template that enables live streaming.
3 Configure a VRR that enables external media server.
4 Record a meeting using the VRR that has the external media server enabled.
Refer to the following instructions to configure the external media servers to work with the
RealPresence Capture Server system.
To configure live streams in recording template
1 Go to Template > Recording Templates.
2 Select a recording template.
3 Click Edit.
4 Select Enable Live Streaming.
5 Go to Live Streaming (MP4) and select Enable H.264 High Profile for Live Streaming.
6 Set the Primary Streaming Rate and Secondary Streaming Rate.
7 Go to Live Streaming (WMV) and configure relevant settings.
8 Click OK.
Polycom, Inc.
63
Download from Www.Somanuals.com. All Manuals Search And Download.
Live Streaming
Start Live Streaming
Procedure for starting a live streaming is the same as the one for starting recording. For more information,
View Live Streaming Information
If live streaming is in progress on the system, the current live streaming list displays on the Live Streaming
page. Go to Media > Live Streaming menu to enter the Live Streaming page.
The live streaming list displays live streaming summary, such as live streaming name, VRR number used,
start time, live streaming detail and multicast detail.
View Live Streaming Video
When the system starts live streaming, you can view the video being live streamed in real time on the Live
Streaming page.
To view live streaming in progress:
1 Go to Media > Live Streaming.
2 Select the live streaming content you want to view in the list, and then click
in the Live
Streaming Details area on the right side of the page. The system’s User Portal opens to play the
video.
If the live streaming content uses two different bandwidths, two Play buttons with their bandwidths
appear in this area, and you may choose the appropriate bandwidth to play based on your network
condition.
You can also view live streaming links on Home and Call.
Configure External Media Servers
You can now stream live meetings and on demand meeting archives to leading 3rd party media servers,
such as Wowza, IIS Media Service (Smooth Streaming only) and Windows Media Server.
Configure IIS or Wowza Media Server
You need to configure a Wowza or IIS media server and your RealPresence Capture Server to work with
the server as well.
To configure IIS and WOWZA media servers:
1 Click IIS or WOWZA under Server.
2 Click Add.
Polycom, Inc.
64
Download from Www.Somanuals.com. All Manuals Search And Download.
Live Streaming
3 Configure the following basic settings.
External Media Servers Parameters
Parameter
Description
Server Name
Server Address
Server Port
Specify the name of the external server.
Specify the IP or DNS of the external server you selected.
Specifies the port that the RealPresence Capture Server system uses to send
the encoded MP4 live streams to the external server.
Following are the default ports:
•
•
IIS Media Server: 80
Wowza Media Server: 1935
Note: Valid port values range from 1-65536. The port number must be the
same as set in the corresponding external media server.
If a firewall sits between the RealPresence Capture Server system and the
external server, make sure that rules are set to allow the two-way
communication between the RealPresence Capture Server system and the
external server.
4 Specify whether to select Enable Live. If enabled, also configure the following settings:
Enable Live Streaming
.
Parameter
Description
Stream Protocol (for WOWZA only)
Application Name
Choose between RTSP Steaming and RTMP Streaming.
Specify the name of the external media server’s application to be used for
the live streaming.
Note: Contact the administrator of the external media server for the naming
rule of the application name.
User Name
Password
Test
Specify the user name to access the external media server.
Specify the password to access the external media server.
Test whether the live streaming configurations work.
Configure Windows Media Server
You need to configure a Windows media server and your RealPresence Capture Server to work with the
server as well.
To configure Windows Media Server:
1 Click Windows Media Server under Server.
2 Click Add.
Polycom, Inc.
65
Download from Www.Somanuals.com. All Manuals Search And Download.
Live Streaming
3 Configure the following basic settings.
External Media Servers Parameters
Parameter
Description
Server Name
Server Address
HTTP Port
Specify the name of the external server.
Specify the IP or DNS of the external server you selected.
The default value is 80.
RTSP Port
The default value is 554.
4 Specify whether to select Enable Live. If enabled, also configure the following settings:
Enable Live Streaming
.
Parameter
User Name
Password
Test
Description
Specify the user name to access the external media server.
Specify the password to access the external media server.
Test whether the live streaming configurations work.
Configure AKAMAI CDN
You need to configure an AKAMAI media server and your RealPresence Capture Server to work with the
server as well.
To configure AKAMAI Media Server:
1 Click AKAMAI under Server.
2 Click Add.
3 Configure the following basic settings.
External Media Servers Parameters
Parameter
Description
Configuration Name
The CONFIG NAME displayed on AKAMAI configuration page under
PUBLISH > Manage Streams.
Stream Name
The STREAM NAME displayed on AKAMAI configuration page under
PUBLISH > Manage Streams.
Stream Number
The STREAM ID displayed on AKAMAI configuration page under PUBLISH >
Manage Streams.
Polycom, Inc.
66
Download from Www.Somanuals.com. All Manuals Search And Download.
Live Streaming
Server Port
Specifies the port that the RealPresence Capture Server system uses to send
the encoded MP4 live streams to the AMAKAI server.
Note: Valid port values range from 1-65536. The port number must be the
same as set in the corresponding external media server.
If a firewall sits between the RealPresence Capture Server system and the
AKAMAI server, make sure that rules are set to allow the two-way
communication between the RealPresence Capture Server system and the
AKAMAI server.
Entry Point
Specified on AKAMAI configuration page under PUBLISH > Manage
Streams.
HDS Playback URL
HLS Playback URL
Specified on AKAMAI configuration page under PUBLISH > Manage
Streams.
Specified on AKAMAI configuration page under PUBLISH > Manage
Streams.
User Name
Password
Specify your entry point user name to access the AKAMAI server.
Specify your entry point password to access the AKAMAI server.
4 Click OK
This is a charged function and you need an account to log in to the AKAMAI
configuration page to get the needed parameters.
To add publishing points for external media servers:
1 Go to Template > VRRs.
2 Select a VRR and click Edit.
3 Click
, select a live streaming server you configured.
4 Enter values in the Publish Point Template field.
5 Fill in an alias for this stream.
6 Select a live streaming bitrate.
7 Click
. Always click Save before clicking OK; otherwise the entered data will be lost.
8 Click OK.
Pre-link Event
Sometimes for significant events like webcast or CEO meetings you may need to send meeting logistics
beforehand, this feature provides pre-link URL for recording, live streaming and multicast live streaming
events.
To create a pre-link event:
1 Go to Template > Events.
2 Click Add.
Polycom, Inc.
67
Download from Www.Somanuals.com. All Manuals Search And Download.
Live Streaming
3 Configure the following settings (* indicates mandatory parameters).
Pre-link Event Parameters
Parameter
Description
Event Name
Specify a unique name for this event. A valid event name contains lowercase
characters (a–z), uppercase characters (A–Z), numbers (0–9), space or
multibyte characters.
Event Number
Specify a number to identify the event, you can also use the number
automatically generated by the system.
Note: The valid number ranges from 300-399.
VRR Name
Choose a VRR from the drop-down list.
URL Extension
Extension of the streaming URL, this is available after live streaming is
enabled for the recording template in the selected VRR.
Note: You need to enable live streaming in recording template. Valid
extension contains lowercase characters (a–z), uppercase characters (A–Z),
and numbers (0–9).
Multicast URL Extension
Extension of the multicast URL, this is available after multicast is enabled for
the recording template in the selected VRR.
Note: You need to enable multicast in recording template. Valid extension
contains lowercase characters (a–z), uppercase characters (A–Z), numbers
(0–9).
Start Date
Start Time
Which date the event will start.
Note: The event cannot start automatically, the start date is for reference only.
Which time the event will start.
Note: The event cannot start automatically, the start time is for reference only.
Description
Specify additional related information.
Event Change Notification
When enabled, you receive e-mail notification once changes are made to the
configured pre-link event settings.
Email Address (separated by ‘,’)
Once changes are made to the configured pre-link event settings, the system
sends an e-mail message to the address set here.
Separate several addresses with comma (,).
4 Click OK.
You need to fill out either URL Extension or Multicast URL Extension, otherwise
the pre-link event is created but the pre-link URL will not be generated.
Polycom, Inc.
68
Download from Www.Somanuals.com. All Manuals Search And Download.
Live Streaming
Add event example
To edit a pre-link event:
1 Go to Template > Events.
2 Select the event you want to change.
3 Click Edit.
To obtain the pre-link URL extension:
1 Go to Template > Events.
2 Select an event from the list.
3 Click Copy Prelink.
Polycom, Inc.
69
Download from Www.Somanuals.com. All Manuals Search And Download.
Live Streaming
Copy prelink information
4 Click OK.
•
•
If you click the URL before or after the event, there will be a pop-up message The
stream is not available now.
When the event starts, the player will refresh the URL and display the stream.
To start the pre-link recording:
1 Go to Home.
2 In the Signaling Connection area, click Dial out to record.
3 Configure relevant settings. You need to select Event Name for the recording to start.
4 Click OK.
Polycom, Inc.
70
Download from Www.Somanuals.com. All Manuals Search And Download.
Media Management
You can archive your conferences and manage your archives.
Manage Archives
You can view all files recorded by the RealPresence Capture Server system in the Media > Archives page.
An administrator can view, play back, delete, download, or re-transcode these media files.
View Archive Details
On the Media > Archives page, administrators can view a summary of each archive.
Archive Details
Parameter
ID
Description
The ID for this archive.
Name
The name of the archive.
Duration
The duration of the archive.
The video codec type used by the archive.
The audio codec type used by the archive.
The content video type of the archive.
The keywords for this archive.
Additional user information.
Video Type
Audio Type
Content Type
Key Words
Description
Play Back and Download Archives
The RealPresence Capture Server system can transcode recorded videos into different formats, layouts
and bit rates, including:
● RAW: RAW bit stream is automatically generated after the system completes the recording, also can
be transcoded if transcoding template is configured.
The RAW files are stored in a proprietary format. They are used as the source file to transcode other
media formats. For detailed transcoding settings, refer to Configure Transcoding Templates.
● MP4: MP4 archives (Also known as H.264 streaming files) can be downloaded.
Polycom, Inc.
71
Download from Www.Somanuals.com. All Manuals Search And Download.
Media Management
● M4A: M4A (audio only file) files can be downloaded to PCs, Macs, or to compatible digital media
devices, but cannot be play backed from portals.
● ISMV: After the ISMV files are generated, they are uploaded to the IIS Media Server, and can be
viewed from the User Portal.
The ISMV files are generated only when the transcoding template is configured with IIS Media Server
and the transcoding template is added in VRR.
● WMV: WMV files can be transcoded if transcoding template is configured. They can be downloaded
to PCs or to compatible digital media devices.
To play back archives through the Admin Portal:
1 Go to Media > Archives.
2 Select the archive you want to play back.
3 Click
and the User Portal opens to play the video.
If the e-mail notification function has been enabled for the VRR that is used to record archives, the
system sends you an e-mail notification automatically once all archives have been converted and are
To download one or several archives from Archives page:
1 Go to Media > Archives.
2 Select the archive you want to download.
3 Click Download.
4 Select one or several media types to download.
5 Click OK.
To download one or several media files from Media Files page:
1 Go to Media > Archives.
2 Select the archive you want to download.
3 Click Media Files.
4 Select one or several media files to download.
5 Click
.
Manage Archives
You can edit or delete archives recorded by your own archives that you are authorized to modify.
To modify archive properties:
1 Go to Media > Archives.
2 Double-click the archive entry you want to modify.
Polycom, Inc.
72
Download from Www.Somanuals.com. All Manuals Search And Download.
Media Management
3 If you are authorized to modify the archive, you can modify following parameters:
Archive Properties
Parameter
Description
Name
Specify the name of the archive.
Note: Only letters, figures, _, space or multi-byte characters can be used
for the file name, and the length is 4-20 characters.
Description
Enable PIN
Key Words
Quick Code
Specify additional related information.
Specify whether to enable PIN code protection for the archive.
Specify additional information related to the archive.
Generated automatically for every archive after the system completes a
recording
4 If you want to change the list of users who can view or modify the archive, click the Allowed
Users/Groups tab.
5 Choose an item (Users/Groups/AD Groups) from the drop-down list and click Add.
6 Click OK.
To delete one or several archive files:
1 Go to Media > Archives.
2 Select one or several archive files you want to delete.
3 Click Delete.
4 Click OK at the prompt message.
Dynamic Archiving
You can view all media files included in an archive, create new media output formats on the fly, stop ongoing
media file creation, or delete existing media files. You can also restart transcoding after you stop the
transcoding, or when there is transcoding error.
To add new media files:
1 Go to Media > Archives.
2 In the archives list, select an archive.
3 Click Media Files.
4 Select one media file.
5 Click Add.
6 Select one or several transcoding templates.
7 Click Add, and then click Close.
Polycom, Inc.
73
Download from Www.Somanuals.com. All Manuals Search And Download.
Media Management
•
Select a transcoding template with lower bit rate, resolution, and frame rate than
that of the source file.
•
•
Click Media > Transcoding to view the transcoding status.
Once transcoding is done, find the transcoded files under Media > Archives.
To delete a media file:
1 Go to Media > Archives.
2 In the archives list, select an archive.
3 Click Media Files.
4 Click a media file to be deleted, and then click Delete.
5 Click OK, and then click Close.
Archives will be deleted permanently once you choose delete action on Admin
Portal.
Transcoding Task Control
In this section you can learn how to view transcoding status, stop an ongoing transcoding, or restart a
transcodong.
To view transcoding status:
1 Go to Media > Transcoding.
2 In the archives list, select an archive.
3 Click Media Files. Media files transcoding can have the following status:
Ready: The file can be played and downloaded.
Waiting: File waiting to be transcoded
Transcoding: File in transcoding.
Error: File with transcoding error.
Stopped: File creation stopped.
4 Click Close to exit the Media Files window.
To stop an ongoing transcoding:
1 Go to Media > Transcoding.
2 Click a media file of the status Transcoding or Waiting, and then click Stop-transcode.
3 Click OK, and then click Close.
You cannot stop transcoding files of the status Error or Stopped.
Polycom, Inc.
74
Download from Www.Somanuals.com. All Manuals Search And Download.
Media Management
To restart a transcoding:
1 Go to Media > Transcoding.
2 Click a media file to be restarted, and then click Re-transcode.
3 Click OK, and then click Close.
You cannot restart transcoding for files of the status Transcoding or Waiting
Polycom, Inc.
75
Download from Www.Somanuals.com. All Manuals Search And Download.
System Administration
System Upgrade and Fallback
You only can upgrade or downgrade RealPresence Capture Server between RealPresence Capture Server
versions. Upgrading or downgrading between RealPresence Capture Server and Polycom RSS 4000 is not
supported.
•
You can upgrade your system from 1.7 to 1.8 directly. If your software version is
older than version 1.7, you need to upgrade your system to 1.7 first, then
upgrade your system to 1.8.
•
•
After system upgrade from 1.7 to 1.8, you need to re-activate the system using
an activation key.
Before you upgrade or downgrade your system, you should always back up your
settings and recordings. Polycom is not responsible for any user data loss during
these operations.
To update your system software to the latest version:
1 Go to Admin > System Upgrade.
2 View the license info and agree to them.
3 Click Add and select the version 1.8 software upgrade package, then click Open.
4 When asked to confirm the action, click Yes.
The system uploads the package and performs the upgrade automatically. This may take several
minutes.
5 Upon completion of the upload, click Upgrade. The system restarts to apply changes.
6 Enter your administrator User ID and Password and then click Log In.
To confirm that the system is upgraded, check the software version on the Product Activation page.
System Fallback
Before system upgrade, the system creates a restore point automatically and after system upgrade, you can
restore both image data and system configuration settings that existed at the time the snapshot was created
To fall back the image, configuration and IVR messages
1 Go to Admin > System Fallback.
2 Read the risk of system fallback and agree to it
3 Click Fallback Capture Server.
Polycom, Inc.
76
Download from Www.Somanuals.com. All Manuals Search And Download.
System Administration
4 Click OK. The system restarts to apply the changes.
Fall back the system early as possible if you find it necessary after system
upgrade, otherwise user data of the following operations will not be saved.
System Log Configuration
The logger utility is activated at the system startup and continually records system events. The log files
generated by the utility contain the following information:
● Events occurred in system internal modules.
● Administrator activities.
● System login attempts.
● Operation errors.
All log files generated the day before are automatically compressed into a ZIP file
named year-month-date.tar.gz at log maintenance window every day. The log
maintenance window is usually the first hour from 00:00:00 system time every day.
The log file storage is 30GB. You are prompted when the system reaches the
storage limit. The system will delete the old logs to free the disk space at log
maintenance window.
Configure Log Settings
You can change the system logging strategy, configure warning limit, and enable remote logging.
To configure the log settings:
1 Go to Admin > Log Settings.
2 Configure the following settings:
Logging Level: Specify the system logging level, which decides to what level system events
should be written into the center/server.log file.
Info – logs all non-debug messages.
Debug – logs all messages.
Error – logs the fewest number of messages.
Warning – logs between error and Info messages.
Logger Warning Capacity: Specify the percentage of log file capacity used at which the system
displays a warning on the dashboard.
Log retention period (days): Defines the number of days to keep log archives on server.
SysLog Server IP Configuration: To configure the IP settings of the SysLog server.
Polycom, Inc.
77
Download from Www.Somanuals.com. All Manuals Search And Download.
System Administration
Log Management
The following table shows actions administrators and auditors can perform.
Log Management
Action
Description
Refresh
Refreshes the list and adds newly generated log files.
Downloads the selected log file.
Download
Download Today’s logs
Downloads all the log files generated today.
To download log files:
1 Go to Admin > System Logs.
2 In the Log list, select the log to be saved.
3 Click Download.
Restart and Shut Down the System
You can shut down or restart your system.
Log
Before unplugging RealPresence Capture Server, you need to shut down the
server in Admin Portal.
If your RealPresence Capture Server does not restart after reboot or upgrade, you
need to unplug your RealPresence Capture Server, wait for about five minutes,
plug in your RealPresence Capture Server, and then reboot.
To restart the Capture Server system:
1 Go to Admin > Restart/ShutDown.
2 Read the risk of restart and click Restart Capture Server.
3 Click OK at the prompt message.
To shut down the Capture Server system:
1 Go to Admin > Restart/ShutDown.
2 Read the risk of shutdown and click Shutdown Capture Server.
3 Click OK at the prompt message.
Backup and Restore System Configuration
You can back up and save the system configuration of RealPresence Capture Server system to your local
computer so you can restore the system configuration in case of necessary. Supported configurations
include:
● Hard Disk Warning Threshold
Polycom, Inc.
78
Download from Www.Somanuals.com. All Manuals Search And Download.
System Administration
● IP setting parameters
● System time
● Recording Settings
● Certificate, port and security policy
● Gatekeeper, SIP, and QoS Settings
To back up current system configuration:
1 Go to Admin > Config Backup/Restore.
The configuration file will be stored on the local machine that the browser is running on.
2 Click Backup.
To restore the system configuration using the configuration file:
1 Go to Admin > Config Backup/Restore.
2 Click Add, select the .ppm file from local machine and click Open.
3 Click Upload.
4 Click Restore.
5 Confirm to restart the system.
Back Up and Restore Media Files
The RealPresence Capture Server system is able to backup media data to the FTP server in the network,
and restore system user data to the selected media data snapshot (based on the time points generated in
the backup). You can back up the entire media data. RealPresence Capture Server only uses passive mode
FTP to transfer files.
Configure an FTP Server for Backup
Before backing up user data, you need to configure FTP server on the RealPresence Capture Server
system first.
The RealPresence Capture Server system supports the following FTP servers:
•
•
•
•
•
3CDaemon
FileZilla Server
Serv-U
Microsoft FTP7.x For IIS
vsftpd
To automatically back up archives after call (Automatic Archive):
1 Go to Admin > Data Backup/Restore.
2 Select Enable Automatic Archive.
Polycom, Inc.
79
Download from Www.Somanuals.com. All Manuals Search And Download.
System Administration
3 Configure the following settings for both FTP server and alternate FTP server.
FTP Server Parameters
Parameter
Server Address
Port
Description
Enter the IP address of the FTP server.
Enter the port of the FTP server.
Media Backup Path
User Name
Password
Specify the default FTP directory to save your media files.
Enter the account and password for login to the FTP server.
Note: The registered FTP user should possess read-write permissions
to user root directory.
Use Anonymous
Enable SSL
When this is enabled, you can log in to the FTP server using
anonymous account.
Set whether to enable SSL encryption for the communication between
the RealPresence Capture Server system and FTP server. The
system can only support implicit SSL FTP.
Test
Test whether the FTP configurations work.
4 Finish Alternate FTP Server Configuration if needed.
5 Click Update.
Once this function is enabled, archives could be transferred to configured
FTP server and removed from local disk after call, this is achieved
automatically.
Polycom, Inc.
80
Download from Www.Somanuals.com. All Manuals Search And Download.
Manage Archives and Live Streams
Using the User Portal
The RealPresence Capture Server provides User Portal for you to view live streaming, play back archives
and dial out for recording.
Your access depends on the type of account you use to log in. The archives, and live streaming may vary,
depending on how archive permission is configured.
To log in to the User Portal:
1 Open a web browser.
2 In the browser address line, enter the system’s portal address, for example, https://System IP
Note: When an IPV6 address is used, refer to the following format: https://[ipv6]
3 Click Log In at the upper right of the screen.
4 Do one of the following:
Enter your user ID and password, then click Log In.
To log in as a guest, click Anonymous Access.
•
•
You need to go to Configuration > Portal Settings and clear Disable view
permission of user portal for guest user.
If the Capture Server system is configured with an Active Directory server, users
defined on the Active Directory can log in to Capture Server system with their AD
account.
To switch to the Admin Portal from the User Portal:
1 In the address line, enter the system’s IP address in this format: https://<system IP address>/.
2 Click Admin Portal, and then enter your user name and password to log in to the system.
RealPresence Capture Server User Portal
Polycom, Inc.
81
Download from Www.Somanuals.com. All Manuals Search And Download.
Manage Archives and Live Streams Using the User Portal
You can view live streaming and play back archives from the User Portal.
To view archives and live streams, your device must turn off the pop-up blocker. For
example:
•
•
For iPad: From Settings > Safari, make sure the option Block Pop-ups is OFF.
For Android devices: From Browser > Settings > Advanced, make sure the
option Block Pop-ups is OFF.
•
For PC Internet Explorer (versions 9, 10, and 11): From Tools > Internet Options
> Privacy, make sure the option Turn on Pop-up Blocker is NOT selected.
Manage Archives
From User Portal you can view details of archived files, search archives and play an archived file.
To view archive details:
» Click Archives.
To view the detailed information of the media files, click Details.
To search archives:
1 Click Archives.
2 In the search field at the upper right of the screen, enter the search phrase and then click
.
To clear the search result and return to the full view, clear the search phase, and
click
again.
To play back archives through the User Portal:
1 Log in to the User Portal.
2 Go to Archives.
Polycom, Inc.
82
Download from Www.Somanuals.com. All Manuals Search And Download.
Manage Archives and Live Streams Using the User Portal
3 Select the archive you want to play back and click
4 A new window opens to play the video.
.
If the e-mail notification function has been enabled for the VRR that is used to record archives, the system
sends you an e-mail notification automatically once all archives have been converted and are ready for web
playback. For more information, see Manage Archives .
If your web browser is the Internet Explorer, you may be prompted Display mixed
content? When you view a live streaming. Click Yes to proceed.
This happens because the User Portal uses secured HTTP (http yet the streaming
URL doesn’t. You can change the Internet Explorer’s default security settings from
Internet Options > Internet > Custom level > Miscellaneous > Display mixed
content > Enable.
View Live Streaming
You can now view live streaming from the User Portal.
To view your live streaming from the User Portal:
Web Browser Requirement" for the supported web browsers.
2 In the browser address line, enter the system’s portal address, for example, https://System IP.
3 Click Live Streaming from the menu on the left.
4 Click the Play button of the live streaming that you want to play.
The live streaming is opened in a new window.
Call
You can start point-to-point recording or dial our from the Capture Server system through User Portal.
The Call menu is only available after you are logged into the User Portal.
To start point-to-point recording from User Portal
1 In the address line, enter the system’s IP address in this format: https://<system IP address>/portal.
2 Enter the non-admin user name and password to log in to the system.
3 Click Call.
4 Click 2 Sites Recording and enter addresses for two invited participants.
5 Click OK.
Polycom, Inc.
83
Download from Www.Somanuals.com. All Manuals Search And Download.
Manage Archives and Live Streams Using the User Portal
Dial out from Capture Server through User Portal:
1 Access Capture Server User Portal by its IP address or host domain name from a compatible
browser.
2 Enter the non-admin user name and password to log in to the system.
3 Click Call > Dial out to record.
4 Configure the relevant settings.
5 Click OK.
Dial out to record is also available under Call menu from Admin Portal.
The recording starts immediately if Start Recording Immediately is enabled in the
selected recording template.
For more information, see Configure VRRs .
Polycom, Inc.
84
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix A – Console Commands
Appendix A – Console Commands
RealPresence Capture Server supports essential system configuration by using Console. You can access
Console via VGA or SSH, some popular applications like Putty supports SSH.
Login Console
The login interface shows all of the software information and you’ll be prompted to enter the login password.
Enter the login password and press the Enter key.
The factory default login password is polycom (case sensitive).
If you entered a wrong password, you may be required to re-login to the system.
If you entered the right password, you are brought directly to the command setting interface.
To log in to Console via SSH
1 Open SSH client, enter Host Name and Port (the default SSH port is 22).
2 Enter the user name and password (both are polycom by default)
Polycom, Inc.
85
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix A – Console Commands
If you have completed all the above configurations and launched Console successfully, press the Enter key.
The login interface appears.
Console Command Descriptions
You can use the following commands.
Network Settings
Select Network Setting and type Enter to set network configurations (DHCP IP address and static IP
address) for LAN 1 or LAN 2.
To configure Static IP Address for LAN 1 or LAN 2
1 Choose a network interface, click OK or type Enter.
2 Select Static Address Setup, click OK or type Enter.
3 Configure network settings.
Parameter
Description
IP Address
IP address of the network port
Gateway address of the network port
Subnet mask of the network port
Default Gateway
Subnet Mask
4 Click Save configuration if you are fine with the settings or Cancel to return.
5 The system will show the prompt message Yes to save the configuration? Choose Yes to proceed
or No to cancel.
6 At the popup message, click Yes if you want the system to restart to apply your changes.
Polycom, Inc.
86
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix A – Console Commands
To configure DHCP IP Address for LAN 1 or LAN 2
1 Choose a network interface, click OK and type Enter.
2 Select DHCP Address Setup, click OK and type Enter.
3 Click Set To DHCP.
4 The system will show the prompt message Yes to save the configuration. Choose Yes to proceed or
No to cancel.
5 Click Yes if you want the system to restart to apply your changes.
After you set the connection feature or IP address for the LAN interface, the system
must be restarted in order for the new settings to take effect.
6 Choose DNS Server and type Enter to configure DNS server address for the system to resolve
domain names.
Disk Usage
Choose Disk Usage and type Enter to view the disk space usage of RealPresence Capture Server.
The total, used, and free disk space are shown.
Reset Console Password
This is to reset the console password, the system will show the prompt message to set new password to
access console.
Reset Portal Admin Password
This is to reset the Portal Admin password, the system will show the prompt message to set new password
to access the Admin Portal.
Reset Config
This is to reset the following system configurations to the default value:
● System Config
Call Settings
Signaling Settings
Port Settings
System time
Media Storage Settings
Multicast Settings
Certificate Management
QoS
SNMP
Active Directory
Polycom, Inc.
87
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix A – Console Commands
Password Settings
Customization
Portal Settings
● Admin
Log Settings
License
● Template
Recording Templates
Transcoding Templates
VRRs
Events
● Server
IIS
WOWZA
Windows Media Server
AKAMAI
● User
User
Group
The system will show the following prompt message
Click Yes to proceed or No to cancel.
After resetting the system configuration, the system must be restarted in order for the new settings to take
effect.
Ping
Choose Ping and type Enter to check the network connection status.
Reboot
Choose Reboot and type Enter to restart the system. The system will show the prompt message Do you
really want to reboot the machine? Choose Yes to restart the system, or No to cancel.
Polycom, Inc.
88
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix A – Console Commands
Shutdown
Choose ShutDown and type Enter to power off the system. The system will show the prompt message Do
you really want to shutdown the machine? Choose Yes to restart the system, or No to cancel.
Fallback
Choose Fallback and type Enter to restore the system to the time the snapshot was created.
Click Yes to fall back the system or No to cancel.
Show
Choose Show and type Enter to show the general system information including System Version, Interface
Information, and IP Address Information.
Exit
Choose Exit and type Enter to exit the command control interface.
Polycom, Inc.
89
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix B – Configure 3rd Party Media
Servers
You can now stream live meetings and on demand meeting archives to leading 3rd party media servers,
such as Wowza, IIS Media Service (Smooth Streaming only) and Windows Media Server. This feature
expands the streaming audience capacity of the RealPresence Capture Server system.
Users can watch these streams and on demand meeting archives hosted on external media servers from
within the Admin Portal, or from the User Portal.
.
For more information about Capture Server and Media Manager integration, see
On the RealPresence Capture Server system, you can live stream recordings and push VoD recordings to
the following external media servers:
● IIS Media Server
● Wowza Media Server
● Windows Media Server
● AKAMAI CDN
You can view the live streaming or archives from the User Portal of the RealPresence Capture Server
system.
The section shows some useful examples to configure third party external media servers, for latest
configuration details, refer to third party external media server documentations.
Configure the Wowza Media Server
You need to configure an Wowza media server and your RealPresence Capture Server to work with the
server as well.
1 Install JDK and Wowza. Run
<Wowza directory>\examples\installall.bat to create the needed configurations and
directories.
Wowza Media Server Configurations and Directories
Parameter
Live Streaming
VoD
Application Name
live
VoD
Polycom, Inc.
90
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix B – Configure 3rd Party Media Servers
<Wowza directory>\applications\vod
Application Directory
<Wowza directory>\applications\live
Configuration File
Location
<Wowza
directory>\conf\live\Application.xml
<Wowza
directory>\conf\vod\Application.xml
2 To enable Wowza authentication, modify the configuration file as follows:
For live streaming: Open <Wowza directory>\conf\live\Application.xml, set digest
as the value for the tag PublishMethod. That is,
<PublishMethod>digest</PublishMethod>.
For VoD: Open <Wowza directory>\conf\vod\Application.xml, Polycom recommends
you not to set authentication, make sure playmethodis none,
<PlayMethod>none</PlayMethod>
Open <Wowza directory>\conf\publish.password, type the your user name and
password.
3 Install and configure a FTP server. The FTP server shares the <Wowza directory>\content directory.
You need to grant you at least the Read, Write, and Create Directories authorities.
The following example shows the configuration for a FileZilla FTP server.
4 Start the Wowza server. When you see the message Wowza media server is started!, the server is
started successfully.
To configure the RealPresence Capture Server system for working with the Wowza server:
1 Go to Server > WOWZA.
2 Click Add.
3 Configure the following basic settings
Wowza Server Parameter
Parameter
Description
Server Name
Server Address
Server Port
Specify the name of your Wowza Media Server.
Specify the Wowza server IP address.
Specify the port the Wowza Media Server used to receive live streaming. The
value is 1935 by default.
Note: Valid port values range from 1-65536. The port number must be the
same as set in the corresponding external media server.
If a firewall sits between the RealPresence Capture Server system and the
external server, make sure that rules are set to allow the two-way
communication between the RealPresence Capture Server system and the
external server.
4 Specify whether to select Enable Live. If enabled, also configure the following settings:
Enable Live Streaming
Parameter
Description
Streaming Protocol
Choose between RTSP streaming and RTMP streaming.
Polycom, Inc.
91
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix B – Configure 3rd Party Media Servers
Application Name
Specify the name of the Wowza server application to be used for the live
streaming.
It should be consistent with the Wowza server configuration. In this
example, application name is live.
User Name
Password
Test
Specify the user name to access the Wowza media server. This option is
required when Wowza authentication is enabled. The User Name should
be consistent with your input in To configure the Wowza server:
Specify the password to access the Wowza media server. This option is
required when Wowza authentication is enabled. The Password should
be consistent with your input in To configure the Wowza server: .
Test whether the live streaming configurations work.
5 Specify whether to stream video on demand (VoD) from this server.
Application Name: the name of the Wowza server application to be used for the VoD.
It should be consistent with the Wowza server configuration. In this example, application name is
VoD.
6 When Enable Vod is selected, configure the following settings to transfer generated recordings to
the Wowza server content directory:
Enable VoD
Parameter
Description
FTP Address
FTP Port
Specify the IP address of the Wowza server.
Specify the port assigned to the Wowza server’s FTP server. The default
port is 21.
User Name
Password
Specify your user name to access this FTP server.
Specify your password to access this FTP server.
Default Path
Specify the default FTP directory to save your recordings. Use / to
represent the root directory.
Enable SSL
Test
Specify whether to enable SSL encryption for the communication between
the RealPresence Capture Server system and the FTP server.
Test whether the FTP configurations work.
7 Click OK.
•
You cannot create two external servers with the same Server type, IP, Port, and
Application Name. This is because the RealPresence Capture Server system
does not allow publishing two streams to the same publish point to avoid
overwriting the first stream by the second one.
•
External latency time will be introduced when external media server configured,
compared with live streaming from Capture Server, the exact time varies
depending on streaming protocol.
Polycom, Inc.
92
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix B – Configure 3rd Party Media Servers
To create a VRR for use with an external server:
1 Go to Template > VRRs.
2 Click Add.
3 Configure the following settings:
VRR Name:
VRR Number
Description
Recording Template
Transcoding Template
e-mail Address: select this option and enter one or several e-mail addresses. Separate several
addresses with commas (,).
The streaming link is contained in the e-mail notification when the streaming is ready for viewing
4 To configure the rest of the settings, refer to the this user’s guide.
5 Click OK.
Configure the IIS Media Server
You need to configure an IIS media server and your RealPresence Capture Server to work with the server
as well.
When you configure an IIS media server, you can create two virtual directories, which are used for live
streaming and VoDs.
To configure the IIS media server:
1 Launch the IIS manager, then create a virtual directory named as live, with the default port as 80.
Specify the physical path for the virtual directory, for example, C:\inetpub\wwwroot\live.
2 Set the authentication methods.
a Select live.
b Double click Authentication.
c To play live streams on an iPad, make sure Anonymous Authentication is selected. To control
an IIS publishing point from your RealPresence Capture Server make sure that Windows
Authentication is selected.
3 Navigate to C:\inetpub\wwwroot\, create two xmlfiles: clientaccesspolicy.xml and
crossdomain.xml.
If you have installed the Polycom RealPresence Media Manager and IIS on the
same server, you need to put the correct crossdomain.xml and
clientaccesspolicy.xml files to the root directory of the RealPresence Media
Manager portal.
For configuration steps, refer to Capture Server and Media Manager Integration
Guide.
Here is the example text for the clientaccesspolicy.xml and crossdomain.xmlfiles.
Polycom, Inc.
93
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix B – Configure 3rd Party Media Servers
clientaccesspolicy.xml
<?xml version="1.0" encoding="utf-8" ?>
<access-policy>
<cross-domain-access>
<policy>
<allow-from http-request-headers="*">
<domain uri="*" />
</allow-from>
<grant-to>
<resource path="/" include-subpaths="true" />
</grant-to>
</policy>
</cross-domain-access>
</access-policy>
crossdomain.xml
<?xml version="1.0" encoding="utf-8" ?>
<access-policy>
<cross-domain-access>
<policy>
<allow-from>
<domain uri="*" />
</allow-from>
<grant-to>
<resource path="/*" include-subpaths="true" />
</grant-to>
</policy>
</cross-domain-access>
</access-policy>
4 Configure a virtual directory for VoDs if you want to play the archives through an IIS Media server.
5 Create a virtual directory named as vod, with the default port as 80. Specify the physical path for the
virtual directory, for example, C:\inetpub\wwwroot\vod.
6 Install and configure a supported FTP server. The FTP server shares the VoD physical path, for
example, C:\inetpub\wwwroot\vod.
7 Grant the users at least the Read, Write, and Create Directories authorities.
To configure the RealPresence Capture Server system for work with the IIS server:
1 Go to Server > IIS.
2 Click Add.
Polycom, Inc.
94
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix B – Configure 3rd Party Media Servers
3 Configure the following basic settings.
IIS Media Server Parameters
Parameter
Description
Server Name
Server Address
Server Port
Specify the name of your IIS Media Server.
Specify the IIS server IP address.
Specify the port that the IIS server used to receive MP4 live streaming. The
value is 80 by default.
Note: Valid port values range from 1 to 65536. The port number must be the
same as set in the corresponding external media server.
If a firewall sits between the RealPresence Capture Server system and the
external server, make sure that rules are set to allow the two-way
communication between the RealPresence Capture Server system and the
external server.
4 Specify whether to select Enable Live. If enabled, also configure the following settings:
Enable IIS for Live Streaming
Parameter
Description
Application Name
Specify the name of the IIS server application to be used for the live streaming.
It should be consistent with the IIS server configuration. In this example, the
application name should be live.
User Name
Password
Test
Specify the user name to access the IIS media server. This field is mandatory
for Windows authentication on IIS servers.
Specify the password to access the IIS media server. This field is mandatory for
Windows authentication on IIS servers.
Test whether the live streaming configurations work.
5 Specify whether to stream video on demand (VoD) from this server. If enabled, also configure the
following settings:
Application Name: the application name to access the IIS media server
6 When Enable Vod is enabled, configure the following settings to transfer generated recordings to
the IIS media server content directory:
Enable VoD for IIS
Parameter
Description
Application Name
Specify the name of the IIS server application to be used for the live
streaming.
It should be consistent with the IIS server configuration. In this example, the
application name should be live.
FTP Address
Polycom, Inc.
Specify the IP address of the IIS media server.
95
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix B – Configure 3rd Party Media Servers
FTP Port
Specify the port assigned to the IIS media server’s FTP server.
The default port is 21.
User Name
Password
Specify your user name to access this FTP server.
Specify your password to access this FTP server.
Default Path
Specify the default FTP directory to save your recordings. Use / to represent
the root directory.
Enable SSL
Specify whether to enable SSL encryption for the communication between
the RealPresence Capture Server system and the FTP server.
Test
Test whether the FTP configurations work.
7 Click OK.
You cannot create two external servers with the same Server type, IP, Port, and
Application Name. This is because the RealPresence Capture Server system does
not allow publishing two streams to the same publish point to avoid overwriting the
first stream by the second one.
To configure a template and VRR for use with the IIS server, see To create a VRR for use with an external
server:
Configuring the Windows Media Server
You need to configure an Windows media server and your RealPresence Capture Server to work with the
server as well.
To configure the Windows Media Server:
1 Open Windows Media Services on program menu.
2 To enable Windows Media Server authentication, modify the properties as the following:
.Navigate to Server > Properties > Authentication, make sure “WMS Anonymous User
Authentication” is enabled.
Navigate to Server > Properties > Authentication, make sure “WMS Publishing Points ACL
Authorization” is enabled, and the Everyone user has full permission.
For live publish point, RSS can create the live publish points, so don’t need to create it manually
at Windows Media server.
For vod publish point, Create a On-demand publish point, input publish point name, location of
content, for example, c:\WMpub\WMarchive.
3 Install and configure an FTP server. The FTP server shares the c:\WMpub\WMarchive directory. You
need to grant the user at least the Read, Write, and Create Directories authorities.
To configure the Capture Server system for work with the Windows Media server:
1 Go to Server > Windows Media Server.
2 On the ACTION panel, click Add.
Polycom, Inc.
96
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix B – Configure 3rd Party Media Servers
3 Configure the following basic settings.
External Media Servers Parameters
Parameter
Description
Server Name
Server Address
HTTP Port
Specify the name of the external server.
Specify the IP or DNS of the external server you selected.
The default value is 80.
RTSP Port
The default value is 554.
4 Specify whether to select Enable Live. If enabled, also configure the following settings:
Enable Live Streaming
.
Parameter
User Name
Password
Test
Description
Specify the user name to access the external media server.
Specify the password to access the external media server.
Test whether the live streaming configurations work.
5 Specify whether to stream video on demand (VoD) from this server. If enabled, specify the
application name. The application name is the name of the media server’s application to be used for
VoD.
Contact the administrator of the external media server for the naming rule of the
application name.
6 When Enable Vod is selected, configure the following settings to transfer generated recordings to
the pre-installed FTP server of the external server:
Enable VoD
Parameter
Description
Publishing Point
FTP Address
FTP Port
Specify a publishing point for Windows Media Server.
Specify the IP or DNS of the external server’s FTP server.
Specify the port assigned to the external server’s FTP server.
The default port is 21.
User Name
Password
Specify your user name to access this FTP server.
Specify your password to access this FTP server.
Default Path
Specify the default FTP directory to save your recordings.
Use / to represent the root directory.
Polycom, Inc.
97
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix B – Configure 3rd Party Media Servers
Parameter
Description
Enable SSL
Specify whether to enable SSL encryption for the communication between the
RealPresence Capture Server system and the FTP server.
Test
Test whether the FTP configurations work.
7 Click OK.
Polycom, Inc.
98
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix C – Configure the Server
Working with VCS
This chapter demonstrates how to configure RealPresence Capture Server working with Cisco
TelePresence® Video Communication Server (Cisco VCS). The configurations are different between H.323
and SIP.
Configure VCS for H.323 Calling
For H.323, after you register RealPresence Capture Server to the Cisco VCS, Cisco VCS works as a
gatekeeper. you can configure the Cisco VCS and then call a VRR created on RealPresence Capture
Server to start a recording.
To configure VCS calling:
1 Create authentication accounts in VCS, such as ff1/1234, ff2/1234….ff6/1234.
H.323 calls: for detailed steps.
3 Go to Configuration > Signaling Settings and set Gatekeeper type as Cisco VCS.
4 Register an endpoint to the VCS. For example, register Polycom Group Series 500 to the VCS.
Now you can dial from the Group Series 500 and the format of the address is E.164+VRR Number. After
the call is set up successfully, you can check the RealPresence Capture Server Admin Portal.
Configure VCS for SIP Calling
If your network supports SIP, you can use SIP to connect to conference calls. Cisco VCS works as a SIP
server.
To configure VCS for SIP calling:
detailed steps.
2 Register an endpoint to the VCS via SIP. For example, register HDX 4000 to the VCS.
3 Configure the VCS to enable SIP calling.
a Log in to the Cisco VCS as an administrator.
b Go to VCS Configuration > New zone to create a new zone.
Polycom, Inc.
99
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix C – Configure the Server Working with VCS
c Configure the zone for your RealPresence Capture Server. Refer to the following table.
VCS Zone Parameters
Parameter
Name
Settings
capture_server_zone
Type
Neighbor
Hop count
H.323
15
Mode
On
Port
1719
SIP
Mode
On
Port
5060
Transport
TCP
Accept proxied registration
Allow
Authentication policy
Do not check credentials
SIP authentication trust mode
Peer 1 address
Off
Your RealPresence Capture Server IP address.
Custom
Zone profile
Polycom, Inc.
100
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix C – Configure the Server Working with VCS
d Create a search rule to route to the zone you created.
The following example assumes that you have the default tandberg recommended rules in place.
Set search rule parameters
Now, you can start a recording by calling a VRR number from any endpoint registered to this Cisco
VCS. For example, if the VRR number is 12345, you can dial 13913912345 directly to start a
recording. 139139 is the prefix name (pattern string set in above picture).
Polycom, Inc.
101
Download from Www.Somanuals.com. All Manuals Search And Download.
|