WELCOME
CS60 DECT™ Wireless
Headset System
User Guide
Thank you for selecting the
CS60 DECT™ Wireless Headset
System from Plantronics.
The CS60 offers wireless,
hands-free headset convenience
and long range workspace
mobility.
This user guide provides
instructions on the installation
and usage of your system.
1
Download from Www.Somanuals.com. All Manuals Search And Download.
DIAGRAMS
BASE UNIT
12
13
16
15
3
2
14
4
6
5
INSTALLING A REPLACEMENT BATTERY
3
Download from Www.Somanuals.com. All Manuals Search And Download.
USAGE INSTRUCTIONS
UK
DIAGRAM KEY
BASE UNIT
HEADSET
1
2
3
4
5
6
7
8
9
Tx Slide Switch (A-D)
18 Microphone
19 Speaker
Rx Slide Switch (1-4)
Speak Volume Adjust UP
Speak Volume Adjust DOWN
IntelliStandTM Switch ON/ OFF
Configuration Dial
20 Talk Button
21 Listen Volume Adjust UP/ DOWN
22 Headset Mute Switch
23 On-line Indicator
24 Charge contacts
AC Power Adapter
AC Power Adapter Port
Handset Cable Port
25 Battery Door
10 Telephone Cable Port
11 Accessory Port
12 Headset Docking Cradle
13 Charge contacts
14 Charge Indicator
15 Talk Indicator
16 Power Indicator
17 Handset Lifter (Optional)
IMPORTANT SAFETY INFORMATION
Ple a se re a d th e followin g in struction s b e fore use :
Ge n e ra l:
•
•
•
•
Operating temperature + 4C to + 49C
Storage temperature + 4C to + 49C
The product is suitable for indoor use only
To reduce the risk of electric shock, explosion or fire:
•
•
Use only the AC power adapter supplied – part number 61634-02 (Euro) or 61635-02 (UK)
Ensure that the voltage rating (e.g. 230V 50Hz) corresponds to the local mains supply you intend
to use
•
•
•
•
Use only the correct battery type – part number – 62346-01
Do not disassemble the product
Keep all products, cords and cables away from operating machinery
Avoid contact with liquids
•
•
Connect the base unit only to a host terminal port explicitly designated for use with handsets or
headsets. Connection through other ports, such as data ports or line ports, may damage the
product and could constitute a fire hazard. If in doubt, please contact your supplier or the supplier
of the host equipment
If mains power fails, the base unit will switch to handset mode
Ba tte ry Sa fe ty:
•
Please observe these precautions to ensure continued safety. Misuse or mistreatment may result in
fire, explosion or the release of corrosive chemicals
•
•
Battery storage temperature + 4C to + 49C
Battery operating temperature + 4C to + 49C
4
Download from Www.Somanuals.com. All Manuals Search And Download.
UK
• Charge the headset battery as described in the Quickstart Guide and User Guide.
Do not charge with any other AC power adapter or charger
• Do not incinerate, disassemble, bend, crush or short-circuit the battery
• Dispose of spent battery promptly and safely in accordance with local regulations. Keep battery
away from children
• Exercise care when handling the battery, AC power adapter, the base and the headset. Do not
short the metal contacts (on the plastic casing) with electrically conducting materials such as rings,
bracelets, keys etc
• If liquid from the battery comes in contact with the eyes, skin or any other part of the body,
immediately flush with fresh water and seek medical advice
• For battery replacement please refer to the diagrams on page 3 or the Quickstart Guide supplied
with the product
INSTALLATION
Please install the CS60 DECT™ Wireless Headset System in accordance with the instructions
detailed in the Quick Start Guide.
HEADSET/HANDSET SELECTION
Pressing the Talk Button (20) on the Headset selects Headset mode. The Talk Indicator (15) on the
base unit will illuminate and the On-Line Indicator (23) on the headset will flash when in Headset
mode. Both of the indicators are extinguished when in Handset mode.
PLACING A CALL USING YOUR HEADSET
To place a call using the headset, the system must be in Headset mode. Take the handset off the
hook and dial in the normal way. You will then be able to talk through your headset. When the
call is complete, return the telephone handset to the cradle.
Tip: By selecting Handset mode after completing your call, you will conserve the headset
battery power and extend the remaining available talktime. You can achieve this by
pressing the Talk Button (20) immediately on conclusion of the call.
Note: If you have installed a Plantronics Handset Lifter (17) please refer to the section
“Making a call using the Lifter” on page 7.
RECEIVING A CALL USING YOUR HEADSET
When your telephone rings take the handset off the hook. Ensure that your CS60 DECT™ Wireless
Headset System is already in Headset mode. You will then be able to talk through your headset.
When the call is complete, return the telephone handset to the cradle.
Note: If you have installed a Plantronics Handset Lifter (17) please refer to the section
“Receiving a call using the lifter” on page 7.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
ADJUSTMENTS
UK
PLACING AND RECEIVING A CALL USING THE HANDSET
In Handset mode the telephone can be used to make and receive calls in the normal way.
OUT OF RANGE WARNING
As you walk away from the base unit you will eventually reach the system operating range limit.
When in Headset mode a warning alert of two beeps will sound in the headset shortly before you
meet the range limit.
On hearing this alert you should walk closer to the base unit to ensure call quality is maintained.
If you ignore this alert and walk out of range, a triple beep will sound in the headset and any
active call will be suspended. On returning within range, a single beep will sound and the call will
be re-established.
If you remain out of range for more than 15 minutes the system will drop the call permanently. If
using a Plantronics Handset Lifter the handset will be replaced and the call terminated.
LOW BATTERY WARNING
When the headset battery is running low (approximately 5 minutes talk time remaining), an
audible warning will be heard through the headset as a single beep repeating every 10 seconds.
Soon after hearing this warning, you should recharge the headset.
RECHARGING THE HEADSET
To recharge the headset, place it into the Headset Docking Cradle (12) in the base unit. During
charging, the Charge Indicator (14) on the base unit will flash.
When the headset is fully charged, the Charge Indicator (14) on the base unit will stop flashing and
remain illuminated.
A completely depleted headset requires a minimum charge time of 1hr before it should be used and
3 hours to fully charge.
REPLACING THE HEADSET BATTERY
Should it be necessary to replace the headset battery at anytime please refer to the diagrams on
page 3.
OPERATION WITH THE HANDSET LIFTER ACCESSORY
The Plantronics Handset Lifter (17) is an accessory that can be purchased for use with the
CS60 DECT™ Wireless Headset System. It has two functions:
1. To automatically notify you when an incoming call is detected even when you are away from
your desk.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
UK
2. To lift the telephone handset from its cradle at your command even when you are away from
your desk.
The installation of the Handset Lifter (17) is described in the user guide that is supplied with it.
MAKING A CALL USING THE LIFTER
Press the Talk Button (20) on the headset. The lifter will raise the telephone handset off the hook.
You will then hear a dial tone in your headset and can proceed to make a call as normal.
When you have finished your call press the Talk Button (20) on your headset. The handset lifter
then lowers the handset to end the call.
RECEIVING A CALL USING THE LIFTER
When a new call is received the telephone rings as normal, but in addition, a ring alert comprising
a repeating sequence of three short beeps will be heard in your headset.
Note : This a d d itiona l ca ll a le rt is only a ctive whe n the Lifte r (17) is conne cte d .
To answer the call press the Talk Button (20) on the headset. The lifter will then raise the
telephone handset off the hook and you will then be able to talk to the caller.
When you have finished your call press the Talk Button (20) on your headset. The handset lifter
then lowers the handset to end the call.
IntelliSta ndTM FUNCTION
When the CS60 DECT™ Wireless Headset System is used in conjunction with a Plantronics Handset
Lifter (17), you can enable the IntelliStand feature.
The IntelliStand senses when the headset has been removed or replaced in the CS60 Base Unit,
automatically activating the lifter to answer or end a call.
The IntelliStand feature is disabled when the IntelliStand switch (5) is in position I or enabled when
the switch is in position II.
SWITCHING FROM HEADSET TO HANDSET WHEN USING THE LIFTER
If during a call you are using your headset and want to switch to the telephone handset, remove
the handset from the Lifter, then press the Talk Button (20) on your headset. The Lifter will lower
and you will then be able to continue the call using the handset.
SWITCHING FROM HANDSET TO HEADSET WHEN USING THE LIFTER
If during a call you are using the telephone handset and want to switch to your headset, press the
Talk Button (20) on the headset. The Lifter will raise and you will be able to continue the call using
your headset.
Replace the telephone handset on the Lifter. When the call is finished press the Talk Button (20)
on your headset. The Lifter will lower the handset and end the call.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING
UK
PROBLEM
I plugged everything in but the lights won’t come on.
Possible Cause
No power
Solution
Check that the AC Power Adapter is connected to the
base unit.
Check that the AC Power Adapter is connected to the
mains supply.
Check that the AC Power Adapter is the model
supplied by Plantronics.
PROBLEM
I cannot hear caller / dial tone.
Possible Cause
Solution
CS60 DECT™ Wireless
Headset System is not
connected correctly
Check that the telephone is connected to the base
unit’s Telephone Cable Port.
Check that the handset is connected to the base
unit’s Handset Cable Port.
Ensure you are in
headset mode
Press the Talk Button to select correct mode.
Out of Range
Walk back into range.
Headset battery is flat
Recharge the battery by placing the headset
in the Headset Docking Cradle.
Listen volume too low
Adjust the Listen Volume Control on the headset.
If the volume is still too low, select another Rx Slide
Switch setting (refer to the Quickstart Guide).
Incorrect Configuration Dial
setting for your telephone
Try other Configuration Dial settings on the base unit.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
UK
PROBLEM
Callers cannot hear me.
Possible Cause
Solution
Mute is selected
Press the mute button once. The audible mute
indicator should then stop beeping.
Headset microphone boom
Align the headset boom with your mouth
is incorrectly positioned
Speak volume is too low
Increase the Speak Volume by adjusting the Speak
Volume Controls on the base unit.
If the volume is still too low, select another Tx Slide
Switch setting (refer to the Quickstart Guide).
Incorrect Configuration Dial
setting for your telephone
Try other Configuration Dial settings on the base unit.
PROBLEM
I can hear a dial tone in more than one configuration position
Possible Cause
Solution
Telephone will work
in more than one
Use the position that sounds best to you and the
person you call.
Configuration Dial position
PROBLEM
I tried all four positions on the Configuration Dial and cannot hear a dial tone in any position.
Possible Cause
Solution
CS60 DECT™ Wireless
Headset System is not
connected correctly
Check that the telephone is connected to the base
unit’s Telephone Cable Port.
Check that the handset is connected to the base
unit’s Handset Cable Port.
You may have an
Call your supplier or local Plantronics office for help.
incompatible phone
The telephone line is dead
Reconnect the handset to the telephone and test.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING
UK
PROBLEM
Receive sounds distorted.
Possible Cause
Solution
Listen volume too high
on your telephone
If your telephone has a receive volume control, lower
this until the distortion disappears.
If the distortion is still present, lower the listen
volume control on the headset. If the distortion
persists, select another Rx Slide Switch setting.
(Refer to the Quickstart Guide).
PROBLEM
I can hear too much background conversation, noise or sidetone.
Possible Cause
Solution
Speak volume is too high
Lower the Speak Volume by adjusting the Speak
Volume control on the base unit.
If the volume is still too high, select another Tx Slide
Switch Setting (refer to the Quickstart Guide)
PROBLEM
Sudden loss of audio, continuous noise or distorted audio on receive.
Possible Cause
Solution
Software reset required
Press the Talk button (20) twice.
If the problem persists perform a System Reset
refer to instructions on page 11.
PROBLEM
My handset Lifter operates every time I remove or replace my headset in the base unit.
Possible Cause
Solution
IntelliStand™ function
is enabled.
To disable the IntelliStand function move the
IntelliStand Switch to position I (Off).
PROBLEM
Battery talktime performance is significantly degraded even after a full recharge.
Possible Cause
Solution
Battery approaching
end of life
Replace with a new battery pack.
Refer to the diagrams on page 3.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
SUBSCRIPTION
UK
SUBSCRIPTION
The Headset and Base Unit are supplied subscribed to each other. However if you wish to use a
replacement headset with the base unit then the units must be re-subscribed as follows:
1. Return the headset to the Headset Docking Cradle (12).
2. Press and hold both the Speak Volume Adjust Buttons (3 & 4) on the base unit for a minimum
of 5 seconds. The Power Indicator (16) will then flash.
3. Press and hold the Headset Mute Switch (22) for a minimum of 5 seconds. The On-line
Indicator (23) will then illuminate.
4. Subscription completion is indicated when the Power Indicator (16) is fully illuminated and the
On-line Indicator (23) is extinguished.
5. If subscription fails within 2 minutes the headset will return to the un-subscribed state.
SYSTEM RESET
To recover from some fault conditions (refer to the Troubleshooting section) you may need to
perform a system reset.
To reset the headset press both the Talk button (20) and Mute button (22) for 5 seconds.
When the On Line Indicator (23) blinks, release both buttons. Press the Talk button (20) again.
Next reset the base unit by disconnecting the AC power adapter (7) from the AC Power Adapter
Port (8) for 5 seconds, then reconnect. The system reset operation is then complete.
MAINTENANCE HINTS
1. Unplug the unit from the telephone and the AC Power Adapter from the mains supply
before cleaning.
2. To clean the headset, remove the headset from the attachment and wipe clean.
3. Clean the equipment with a damp (not wet) cloth.
4. Do not use solvents or other cleaning agents.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
ACCESSORIES
UK
OPTIONAL PARTS & ACCESSORIES
There are a range of Plantronics accessories designed to enhance the functionality of your
CS60 DECT™ Wireless Headset System. Please contact your Plantronics Supplier for further details.
1. HL10 Telephone Handset Lifter
2. On-Line Indicator
3. On-Line Indicator Extension Cable
4. Accessory Converter Cable
5. Battery
6. Battery Door
7. AC Power Adapter (UK only)
8. AC Power Adapter (Europe excluding UK)
9. Base Unit Cable
10. CS60 Headset
11. Earloops (pack of 3)
12. Behind-the-Head Neckband
13. Over-the-Head Band
WARRANTY AND SERVICE
•
Plantronics guarantees the satisfactory condition of the equipment with regard to manufacturing
and material defects for 2 years from the date of purchase. (Please retain the original receipt).
•
This product should be installed and used in accordance with the instructions detailed in this
user guide, and serviced at an approved Plantronics Service Centre. Failure to comply with these
conditions may render the warranty void.
•
This does not affect your statutory rights.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Pla ntronics
2 yea r Wa rra nty
a nd Repa ir
Service
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Pla ntronics 2 yea r Wa rra nty
a nd Repa ir Service
UK • Products under warranty are
N
•
•
Produktet erstattes gratis i
garantiperioden.
replaced free of charge.
•
All units serviced to full
production standards using
original factory parts.
Alt utstyr er overhalt med originaldeler
og holder produksjonsstandard.
+ 4 7 2 3 1 7 3 7 7 0
0 8 0 0 4 1 0 0 1 4
NL • Producten die onder de garantie
D
•
•
Produkte werden innerhalb der
Garantiezeit kostenfrei repariert
oder ersetzt.
vallen, worden kosteloos vervangen.
•
Alle units voldoen volledig aan de
productie-eisen en zijn vervaardigd
van originele fabrieksonderdelen.
Der Service erfolgt gemäß den
Produktionsstandards unter
Verwendung von Originalteilen.
0 8 0 0 7 5 2 6 8 7 6 (N L)
0 0 8 0 0 7 5 2 6 8 7 6 6
(BE/ LUX)
0 2 2 2 2 / 8 3 0 2 - 1 3 4
DK • Produkter dæ kket af garanti vil
P
•
•
Os produtos cobertos pela garantia
são substituídos gratuitamente.
blive ombyttet uden beregning.
• Alle enheder efterses i henhold til
produktionsstandarder og ved
brug af originale fabriksdele.
Todas as unidades recebem assistência
técnica em conformidade com os
padrões de produção utilizando
peças de fábrica originais.
+ 4 5 4 4 3 5 0 5 3 5
E
•
•
Los productos en periodo de garantía
serán reparados libre de cargos.
+ 3 4 9 1 6 4 0 4 7 4 4
SF • Takuunalaiset vikaantuneeet
Todas las unidades preparadas
según estándares de funcionamiento
a pleno rendimiento con piezas
originales de fábrica.
tuotteet vaihdetaan.
•
Kaikki yksiköt huolletaan täysin
tuotantovaatimusten mukaan.
Varaosina käytetään vain
alkuperäisiä osia.
9 0 2 4 1 5 1 9 1
F
I
•
•
Les produits sous garantie sont
remplacés gratuitement.
+ 3 5 8 9 8 8 1 6 8 5 2 0
S
•
•
Produkter med gällande garanti
byts ut utan kostnad.
Les réparations répondent aux normes
de production et sont réalisées avec des
pièces d'origine.
Alla enheter uppfyller
produktionsstandarden och
består av originaldelar.
0 8 2 5 0 8 2 5 9 9
0 , 15 € TTC / mn
Me g a la n s:
+ 4 6 3 1 5 5 8 8 0 0
•
•
I prodotti in garanzia verranno
sostituiti gratuitamente.
L’assistenza di tutte le unità viene
effettuata in conformità con gli standard
di produzione utilizzando parti di
ricambio originali.
An ovo:
+ 4 6 2 6 1 7 3 0 4 0
0 2 9 5 1 1 9 0 0
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Plantronics Ltd
Wootton Bassett, UK
Tel: 0800 410014
Plantronics Acoustics
Italia Srl
Milano, Italia
+44 (0)1793 842200
Numero Verde: 800 950934
+39 02951 1900
Plantronics B.V.
Hoofddorp, Nederland
Tel: (0)0800 PLANTRONICS
0800 7526876 (NL)
Plantronics Iberia, S.L.
Madrid, España
Tel: 902 41 51 91
00800 75268766 (BE/LUX)
+34 91 640 47 44
Plantronics Sarl
Nordic Region
Noisy-le-Grand, France
Tel: Finland: 0201 550 550
Tel: Sverige: 031 28 95 00
Tel: Danmark: 44 35 05 35
Tel: Norge: 23 17 37 70
No Indigo: 0825 0825 99
0 , 15 € TTC / mn
+33 (0)1 41 67 41 41
Plantronics GmbH
Hürth, Deutschland
Tel: 0800 9323400
+49 22 33 3990
Österreich: 0800 242 500
Schweiz: 0800 932 340
Plantronics Middle East,
Eastern Europe, Africa
and India
Tel: +44 (0)1793 842443
Plantronics Ltd, Interface Business Park, Bincknoll Lane,
Wootton Bassett, Wiltshire SN4 8QQ. ENGLAND
© 2003 Plantronics Inc. All rights reserved. Plantronics, the logo design, Plantronics and
the logo design combined and IntelliStand are trademarks or registered trademarks of
Plantronics Inc. DECT is a trademark of ETSI.
Download from Www.Somanuals.com. All Manuals Search And Download.
Patent U.S. 5,210,791 and Patent Pending. 07/03
|