Calisto® 800 Series
P820-M/P825-M/P830-M/P835-M
user guide
TM
Firmware version 85.02
Download from Www.Somanuals.com. All Manuals Search And Download.
Welcome
Congratulations on purchasing your new Plantronics product. This user guide
contains instructions for setting up and using your Calisto Speakerphone
(Speakerphone + PA50 Microphone) System.
The Calisto comes in several models:
• The P820 model connects to mobile phones and PC softphones.
• The P825 model connects to mobile phones and PC softphones, and includes a PA50 wireless
mic accessory (see Use Your Calisto with a Wireless Mic on page 22).
• The P830 model connects to mobile phones, softphones, and analog landlines.
• The P835 model connects to mobile phones, softphones, analog landlines and includes a PA50
The Calisto offers:
• Full duplex wideband audio with advanced noise cancellation
• A 2.4” color display and dial pad for easy caller ID viewing, dialing, answering, switching, and
muting across devices
• Support for Bluetooth and wired headsets and headphones (2 x 3.5mm jack)
With the Calisto, you can:
• Make and answer calls for any of your connected phone lines.
• Manage and switch among multiple calls, even from different phones.
• Easily switch call audio between the built-in speakerphone, a wired headset/headphones/
earbud, or a wireless Bluetooth headset.
• Use the Call Log and Favorites to quickly view and dial numbers.
• Customize settings to make your Calisto work best for you.
Please refer to the separate safety instructions for important product safety information prior
to installation or use of the product.
System Requirements
Computer
• Supported Operating Systems: Windows XP®, Windows Vista®, Windows® 7
• Microsoft Windows XP-Service Pack 3 (SP3) or later (Recommended)
Microsoft Windows Vista-Service Pack 1 (SP1) or later (Recommended)
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting the Cables
*
*
Landline on P830 & P835 only
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Speakerphone and Microphone Basics
Speakerphone
1
4
2
3
5
6
7
1 Analog landline telephone cable (P830 & P835 models only)
2 USB cable to computer
3 AC adapter (P830 & P835 models only; available as an optional accessory
for P820 & P835 models)
4 Talk/End key
5 Audio key. Switches from the speakerphone to a headset (or wireless mic)
and back.
6 Mute key
7 3.5 mm headset/headphone jacks
Microphone
1
2
1 Talk/End key: Press with one tap to answer or end a call. The key is green
when you have an incoming call, red when you are on a call.
2 Mute/Unmute keys: Press red key on both sides. The keys light up red
when a call is muted
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Set up your speakerphone
Accessories
The following optional accessories are sold separately:
• Microphone clip: Enjoy freedom of movement and exceptional transmit quality for the ultimate
speakerphone experience.
• Plantronics H-Top adapter cable: Connect Plantronics H-Tops with QD directly to the dual
3.5mm headset jack.
• 2.5mm-to-3.5mm adapter: Convert 2.5mm corded headsets to connect to the dual 3.5mm
headset jack.
• Headset charging cable: Charge a Plantronics Bluetooth headset with micro USB ports directly
from your Calisto
• Carrying case.
For more information on accessories, visit plantronics.com.
Set Up Your Calisto
Follow the instructions on the Calisto screen to complete setup.
The setup includes the following steps. Most steps are optional.
NOTE If you skip any part of setup, you can access the setup screens later by selecting Menu >
settings > Advanced setup > setup Assistant.
Basic setup: Enter your preferred language and your country.
Language
English
Français
Español
Deutsch
Português
NEXT
Area Code setup: If you select United States or Canada as
Setup Assistant
your country, enter your 3-digit landline phone area code. This
enables your Calisto to automatically add a “1,” if required, when
you dial a number from your call log (see Use the Call Log on
The next few screens will guide
you through the setup process
page 14).
If you enter an incorrect digit, press OK to delete the last digit
you entered.
BACK
NEXT
Press Next (right softkey) if you do not want to enter an area
code. Note that this may result in incorrect dialing if you dial a
number from your call log.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Mobile phone setup (optional): When you connect your Calisto
to a mobile phone that supports Bluetooth, call audio from that
phone is automatically routed to your Calisto. To connect to a
mobile phone, do the following:
Mobile Phone
Do you want to setup a mobile
phone to use with Calisto?
1 On the Mobile Phone setup screen, make sure Yes is
Yes(Press OK)
highlighted, and press OK
.
NOTe Do not press Next/Skip (right softkey). This skips the phone
BACK
NEXT SKIP
setup process.
2 Follow the onscreen instructions. If prompted, enter 0000 as
the passkey on your phone.
NOTe To access mobile phone setup later—for example, if you
want to pair with a second mobile phone—select Menu > Settings >
Bluetooth Setup.
Bluetooth headset setup (optional): When you connect your
Calisto to a Bluetooth headset, you can route call audio to
the headset directly from your Calisto. This lets you use your
Bluetooth headset for landline, mobile, and softphone calls. To
connect to a mobile phone, do the following:
Bluetooth Headset
Do you want to setup a Bluetooth
headset to use with Calisto?
Yes(Press OK)
1 On the Headset setup screen, make sure Yes is highlighted,
and press OK
.
BACK
NEXT SKIP
NOTe Do not press Next/Skip (right softkey). This skips the phone
setup process.
2 Follow the onscreen instructions.
NOTe To access Bluetooth headset setup later, select Menu
settings Bluetooth setup
>
>
.
Setup Complete
You are now ready to make and
receive calls.
FINISH
After setup, call audio from any phone line you have connected to your Calisto—mobile,
softphone, or analog landline (P830 & P835 models only)—is automatically routed to your
Calisto speakerphone. If you connected a headset to your Calisto, you can route the audio from
any call connect to the speakerphone from the headset and back via the Audio Key
.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Get to Know Your Calisto
8
7
9
6
10
11
5
4
3
1
2
1 Talk/end: Press to dial a number you entered, to answer an incoming call, or to end a call. The
key is green when you have an incoming call, red when you are on a call.
2 Mute: Press to mute the currently active call. (Red when on, white when off and in a call)
3 dual 3.5mm headset/headphone/earbuds jack (on side of device): Insert headphones or earbuds
into the jack. For headsets with microphones, insert the microphone into the jack and the
speaker into the jack.
4 Audio Key: Press to switch from your Calisto speakerphone to a headset or wireless mic
accessory and back. If you have more than one headset (wired or wireless) connected to your
Calisto, pressing Audio Key displays a list of all your audio options. Highlight the option you
want to switch to, and press OK When the microphone in the base is active you will see a white
LED lit on the front side of the unit. .
5 1 key: If you entered a voicemail access number, press and hold 1 from the Main Menu or the
Dial screen to dial it (see Enter Your Voicemail Access Number on page 29).
6 Volume up/down: When you are on a call, press +/- to adjust the call volume. When you’re not
on a call, press +/- to adjust the ringer volume. When a call is ringing, press +/- to silence the
ringer for that call only.
7 screen: Use the Control and OK keys on the right to select onscreen items.
8 softkeys: Press to access the option shown onscreen above the softkey.
9 Control up: Press to scroll up a list or to increase an onscreen control, such as screen
brightness.
10 OK: Press to select a highlighted item or accept the control setting.
11 Control down: Press to scroll down a list or to decrease an onscreen control, such as screen
brightness.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
NOTe See Connecting the Cables on page 4 for the location of analog landline, USB, and AC adapter
cable jacks.
Screen
idle screen Notifications
When you are not on a call, the screen displays either the Plantronics logo or some or all
of the following information, depending on the connected phone line, the services you have
subscribed to (such as voicemail), and/or the softphone you are using:
Call Log
Favorites
Bluetooth
Settings
1
2
3
4
DIAL
MENU
DIAL
1 Your online status, as shown in your softphone*
2 Connected Bluetooth mobile phone or headset status
3 Current time based on your PC clock
4 Missed calls (total for all connected landline, mobile, and softphones*)
5 New voicemail (for connected landline and softphones*)
*If supported by your softphone. Check the features available for your softphone.
status Bar icons
The status bar is the row of icons at the top of most screens.
Available
9:20 AM
DIAL
MENU
: Shows the level of voice activity during a call. If the call is muted, the indicator displays no
bars.
Headset/headphone/earbud connection indicators
: Your Calisto is connected to a Bluetooth headset. Call audio is routed to the headset.
: Your Calisto is connected to a wired headset, headphones, or earbuds. Call audio is routed
to the headset, headphones, or earbuds.
: You are in a call and your PA50 wireless mic is active.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Outgoing Line
Outgoing phone line indicators
When you make an outgoing call, the call is made by default using the last line you selected on
the Dial screen (see Make a Call on page 11). To choose a different line, simply highlight the line
of your choice on the Dial screen. If the last line used is unavailable, outgoing calls are made
over the first available line, in this order: softphone, landline (P830 & P835 models only), mobile
phone. Note that you can answer incoming calls from any connected phone line on your Calisto.
: Outgoing calls are made over your default softphone line.
: Outgoing calls are made over your analog landline (P830 & P835 models only).
: Outgoing calls are made over your connected mobile phone line.
Online status indicators (if supported by your softphone application)
If supported by your softphone, your Calisto displays your online status, such as available, busy,
away, and so on. Actual icons vary according to the softphone.
Menu
The menu gives you access to many Calisto features. To display the menu, do one of the
following:
• When the idle screen is displayed, press Menu (right softkey) or any key on your Calisto.
• When you are working with a feature within a menu, press and hold Back (left softkey) to
return directly to the main menu.
• Call Log: See Use the Call Log on page 14.
• Favorites: See Enter/Edit Favorites on page 15.
• Bluetooth: See Disconnect from/Reconnect to a Mobile Phone or Bluetooth Headset on page 26
• settings: See Customize Your Calisto Settings on page 28.
Optimal Audio Performance
Your Calisto is optimized for personal use. To minimize background noise, the microphone pick-
up range is limited. This illustration shows ideal placement of your Calisto to optimize voice
pick-up:
If you require 360-degree room coverage to handle multi-party calls, we recommend using the
Plantronics PA50 wireless mic. You can place the wireless mic on a table for full 3600 coverage
(see Use Your Calisto with a Wireless Mic on page 22).
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Use Call Features
Your Calisto lets you use features such as answering calls from all your
connected phone lines, answering a second incoming call, or making a
second outgoing call.
Make a Call
use the dialpad
1 To bring up the dialpad from the idle screen or the menu, either press dial (left softkey) or tap
the unlit dialpad.
NOTe: If the idle screen or the menu is displayed, you can simply enter the number without bringing
up the dialpad.
2 If you want to dial the number using a line other than the current outgoing line (see Outgoing
Line on page 10), select the line you want to use.
3 Enter the number on the dialpad.
NOTe: To delete the last digit you entered, press BACKSPACE
digits you entered, press and hold BACKSPACE (right softkey).
(right softkey). To delete all the
4 To dial the number, press Talk/End
or OK
.
dial a Call Log entry
See Use the Call Log on page 14.
dial a Favorite
See Enter/Edit Favorites on page 15.
Answer or Ignore a Call
Answer a Call
Press Answer (right softkey) or Talk/End
.
NOTe: If you use a Calisto model P830 or P835 with a landline, see Special Features for Using Your
Calisto P830 with a Landline on page 13.
ignore a Call
Press ignore (left softkey). If ringing phone line has voicemail service, the call will continue
through to voicemail.
Answer a Second Incoming Call
If you are on a call and receive an incoming call notification, do one of the following:
• To put the current call on hold and answer the new incoming call: Press Hold & Answer (right
softkey). You can then switch between the two calls (see Switch Between Calls on page 11).
• To hang up the current call and answer the new incoming call: Press Talk/End
to hang up the
current call. Press Answer (right softkey) or Talk/End
to answer the new call.
Switch Between Calls
Press Control Up
or Down
to highlight the call you want to make active. The other call is
automatically put on hold.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
NOTe: If you use a Calisto model P830 or P835 with a landline, see Special Features for Using Your
Calisto P830 with a Landline on page 13 for more information on call switching.
Mute a Call
You can mute the currently active call at any time by pressing Mute . The Mute key turns red
when call is muted. Press Mute again to unmute the call. The Mute key turns white.
NOTe: If you put a call on hold (by answering a second call, making a second call, or switching
between two active calls), the call on hold is automatically muted.
End a Call
To end the active call, press End (left softkey) or Talk/End . Note the following:
• If you have one active call and one call on hold, ending the active call makes the call on hold
active.
• If you have one active call and more than one call on hold, ending the active call makes the last
call placed on hold active.
Use Other Call Options
Make a second Outgoing Call
Dial a Number
PC
Mobile
BACK
1 While on a call, press Options > Place new Call.
2 Select an option for making the second call: dial (dialpad), Call Log, or Favorites. When the
phone begins dialing the second call, the first call is placed on hold.
NOTe: The Make a Call option is available only for a phone line that is not currently in use. For
example, if you are on a call on your analog landline, you can make a second outgoing call on your
mobile phone or softphone line.
enter Passwords and Numbers
Connected:
555-1212
9
SWITCH (Flash)
OPTIONS
12
Download from Www.Somanuals.com. All Manuals Search And Download.
If you are on a call and are prompted to navigate a phone tree or enter a password, simply enter
the numbers using the dialpad. Or press Options (right softkey) > enter digits, and enter the
numbers on the dialpad. This works with mobile, home landline, and softphone calls.
Special Features for Using Your P830 & P835 Calisto with a Landline
use the Flash Feature
Connected:
555-1212
00:01:49
SWITCH (Flash)
OPTIONS
During an analog landline call, the left softkey is labeled switch (Flash). Use this key in any of
the following situations:
• If you are on a call and a second call comes in, on another press Hold & Answer (right softkey)
to answer the incoming call.
• If you receive a call on the same line, press switch (Flash) (left softkey) to switch between these
calls.
• If you are on one call, to call a second person, press switch (Flash) (left softkey) to get a dial
tone, and then dial the number.
• If you have two calls, to call a third person, press Options (right softkey) > Place new call to
get a dial tone, and then dial the number. When the person answers, press Switch (Flash) (left
softkey) to connect the person.
NOTe: You can also press Options (right softkey) to change the audio device or enter digits.
use Multiple Phones with the same Landline
If you have multiple phones using the same analog landline for your Calisto, and a call is made
or answered on another phone, your Calisto screen shows that a call is in progress and the
landline is in use. You do either of the following:
• Press Talk/end
or Pickup Call (right softkey) to use your Calisto to join in the call. To hang up
from the call, press Talk/end . or Hang up (left softkey). This does not end the call.
• Press Main Menu (left softkey) to access the menu. You can use the menu items in the same
way as at any other time. Select Landline Call (right softkey) to return to the call.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Use the Call Log
Call Log
1 (123) 456-7890
US CELLULAR
MOM
JOHNSON M
HOME
BACK
OPTIONS
The Call Log lists all incoming, outgoing, and missed calls for all phone lines connected to
your Calisto. If the caller name is known, the name is shown; otherwise, the phone number is
shown. For calls made today, the time is shown. For older calls, the date is shown. Call Log icons
include the following:
: Missed call
: Outgoing call
: Incoming call
From the Call Log, you can do any of the following:
• Call a number: Highlight the Call Log entry. To call using the current outgoing line, press Talk/
end To call using a different line, press OK
OK
, highlight the line, and press Talk/end or
.
• View call details including call duration and phone type, if known: Highlight the Call Log entry
and press Options (right softkey) > Call Details.
• Add the Call Log entry to Favorites: See Create a Favorite from a Call Log Entry on page 16 for
details.
• sort the Call Log list: From the Call Log, press Options (right softkey) > sort List. Select whether
to sort the list by incoming, outgoing, or missed calls.
• delete a Call Log entry: Highlight the entry and press Options (right softkey) > delete this record.
Select Yes to confirm.
• delete the entire Call Log: From the Call Log, press Options (right softkey) > delete all records.
Select Yes to confirm.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Enter/Edit Favorites
You can enter names and numbers as favorites so you can easily dial
them right on your Calisto. For each favorite, you can enter multiple phone
numbers and label them as home (H), work (W), mobile (M), or other (O).
Create a Favorite
You can create a favorite from an ended call, from your Call Log, or manually.
Create a Favorite from an ended Call
Call Ended (00:03:15)
Add this number to Favorites?
555-1212
No
Yes
1 When you end a call from a number that is not already in Favorites, an Add to Favorites?
prompt appears. Press Yes (right softkey).
2 Do one of the following:
• To add the number to an existing favorite: Select Add to existing. Select the favorite to use, and
then select the number type to assign the number to. If a number already exists for that type,
press Yes (right softkey) to replace the existing number.
• To create a new favorite for the number: Select Create new favorite. Select the number type
(Home, Work, Mobile, Other) and enter or edit the name, if desired. Note the following when
entering letters:
To enter the second letter on a key:
Press the key twice—for example, to enter K, press 5
twice. Press 5 three times to enter L, and so on
To switch among lowercase letters, uppercase
letters, title case, and numbers:
Press *. The currently selected option is shown in the
upper-right corner of the screen
To enter special characters:
To enter a space:
Press 1.
Press # or select insert a space onscreen.
To delete the last character entered:
To delete all characters entered:
Press BACKSPACE
Press and hold BACKSPACE
Press Control Up or Down
(right softkey).
(right softkey).
To move the cursor forward or backward
through the characters without making a
deletion:
15
Download from Www.Somanuals.com. All Manuals Search And Download.
• Press save (left softkey) twice.
Create a Favorite from a Call Log entry
Options
Call Details
Add to Favorites
Sort List
Delete this record
Delete all records
BACK
1 Highlight a Call Log entry and press Options (right softkey) > Add to Favorites.
2 Do one of the following:
• To add the number to an existing favorite: Select Add to existing. Select the favorite to use,
select the number type to assign the number to, and press edit (right softkey). If a number
already exists for that type, press Yes (right softkey) to replace the existing number.
• To create a new favorite for the number: Select Create new favorite. Select the number type
and enter or edit the name, if desired. See Create a Favorite from an Ended Call on page 15 for
information on entering characters.
• Press save (left softkey) twice.
Create a Favorite Manually
New Favorite
Name
H
W
M
O
BACK/SAVE
EDIT
1 Press Menu (right softkey) > Favorites > New Favorite (right softkey).
2 Highlight Name, press edit (right softkey), and use the dialpad to enter the name. See Create a
Favorite from an Ended Call on page 15 for information on entering characters.
3 Press save (left softkey).
4 Highlight a phone number type (H = home, W = work, M = mobile, O = other), press edit (right
softkey), and use the dialpad to enter the number. Repeat for each type of number you want to
enter. Note the following when entering numbers:
16
Download from Www.Somanuals.com. All Manuals Search And Download.
To enter a + symbol:
Press and hold 0.
To insert a 1-second pause in the numbers you are Select Insert a Pause onscreen. Inserting a pause
entering:
allows you to add/edit passcodes/passwords
to phone numbers so that the entire string
automatically gets dialed. This feature is known as
“chain dialing.”
To delete the last character entered:
To delete all characters entered:
Press BACKSPACE
Press and hold BACKSPACE
Press Control Up or Down
(right softkey).
(right softkey).
.
To move the cursor forward or backward through
the characters without making a deletion:
5 Press save (left softkey) twice.
dial a Favorite
1 Press Menu (right softkey) > Favorites.
2 Select the favorite and highlight the number you want to dial.
3 To dial the number using the current outgoing line (see Outgoing Line on page 10), press Talk/
end . To dial the number using a different line, press OK
select the line, and then press OK
or Talk/end . .
edit a Favorite
1 Press Menu (right softkey) > Favorites.
2 Select the favorite and press Options (right softkey) > Edit Favorite.
3 Highlight the name or number you want to edit and press edit (right softkey).
4 Use the dialpad to make the changes you want. See Create a Favorite from an Ended Call on
page 15 for details on entering letters, and Create a Favorite Manually on page 16 for details on
entering numbers.
5 Press save (left softkey) twice.
search for a Favorite
When you have Favorites open (Menu (right softkey) > Favorites), you can use the dialpad to
search for a favorite, as follows:
• Press a number key to jump to the first Favorites entry that starts with the first letter shown
on the key—for example, press 5 to jump to the first entry that starts with J.
• Press the key twice to jump to the first entry that starts with the second letter shown on the
key—for example, press 5 twice to jump to the first entry that starts with K. Press 5 three times
to jump to the first entry that starts with L, and so on.
• If there is no entry that starts with a given letter, the highlight jumps to the first entry that
starts with the next letter. So, if there is no K entry, pressing 5 twice jumps to the first entry
that starts with L.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
delete a Favorite
1 Press Menu (right softkey) > Favorites.
2 Select the favorite and press Options (right softkey) > delete Favorite.
3 Press Yes (right softkey) to confirm.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Access Voicemail
You can access voicemail from your Calisto for both your analog landline
(P830 & P835 models only) and your softphone, if the softphone application
supports this feature.
To use your Calisto to access analog landline voicemail, you need to enter your landline
voicemail access number. You can do this from the Settings menu (see Enter Your Voicemail
Access Number on page 29).
When you have a new voicemail message, a message icon
appears on the idle screen.
Available
9:20 AM
Voicemail
DIAL
MENU
To check voicemail:
1 From the main menu or the Dial screen, press and hold 1 on the dialpad.
2 If your Calisto is set up to access voicemail from more than one phone, select the phone you
want to check.
Voicemail
Landline Voicemail
Pc Voicemail
BACK
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Use Your Calisto with a Headset
You can route call audio from any connected phone (mobile, softphone, or
home landline) to a connected headset.
Supported Headset Types
Headset Type
Jack Type
insert Jack into:
Microphone used
On:
Corded
Headphones/
Earbuds
Single 3.5mm jack Insert into Calisto
jack.
Calisto
Calisto
Headsets/
Earbuds with
Microphones
Single 3.5mm jack Insert into Calisto
jack.
Headsets with
Microphones
Single 2.5mm jack Requires Plantronics
2.5mm-to-3.5mm adapter
(part # 76920-07).
Calisto
Insert into Calisto
jack.
Headphones with
Microphones
Dual 3.5mm jack
Quick Disconnect
Insert into both Calisto
and jacks.
Headphones
H-Top
Plantronics
Yes. Requires Plantronics
QD-to-Dual-3.5mm adapter
(part # 28959-01). Insert into
Professional
H-Tops (Example:
Plantronics
both Calisto
SupraPlus wideband
Headset)
and
jacks.
Wireless
Bluetooth Headset/ Wireless
Headphones
NA
Headset
(Example: Plantronics
Voyager PRO+)
Plantronics PA50
Wireless Mic
Wireless
NA
Can switch
between wireless
mic and Calisto
Switch Call Audio Between Your Calisto and a Headset
To switch call audio between your Calisto speakerphone and any connected headsets, do one of
the following:
• When you are not on a call: Press Audio Options . If you have one headset connected to your
Calisto, pressing this key switches from the speakerphone to the headset and back. If you have
more than one headset connected to your Calisto, pressing this key opens the Audio Devices
screen. Select the device you want to use. This device now becomes the default audio device—
audio for new incoming calls plays over this device unless you change it.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Call Options
Change Audio Device
Enter digits
BACK
NOTe: If you have a Plantronics PA50 wireless mic, it appears on the Audio Devices screen as
Speakerphone + Wireless Mic.
• If you plug in a wired headset/headphones/earbud, the call audio automatically routes to the
attached device. If you unplug the wired device, call audio automatically routes to the Calisto
speakerphone.
• For information on disconnecting the currently connected Bluetooth headset, see Disconnect
from/Reconnect to a Mobile Phone or Bluetooth Headset on page 26.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Use Your Calisto with a Wireless Mic
The Calisto PA50 is a wireless mic for use with the Calisto 800 series of
multi-device speakerphones. The wireless mic is an accessory that provides
unparalleled freedom of movement and exceptional transmit quality for the
ultimate speakerphone experience.
The PA50 is included and pre-paired with the Calisto P825 and P835 speakerphone and is
available as an accessory sold separately for use with the Calisto P820 or P830 models.
Setup
1 Disconnect all cables from your Calisto.
2 Insert the wireless mic docking station into the slots at the bottom of the Calisto. Make sure
the docking station is pushed all the way in.
3 Reconnect all cables to the Calisto.
4 Place the wireless mic in the docking station and charge it for a minimum of 2 hours or until
the Calisto screen indicates that the mic is fully charged.
Pairing (if not pre-paired)
1 Once the wireless mic is fully charged, on your Calisto, go to Menu > Settings > Bluetooth Setup.
Select Headset (or Wireless Mic) > Pair New Headset.
2 Put the wireless mic in pairing mode by pressing
for 10 seconds or until the light flashes
red and green.
3 On your Calisto, press Next (right softkey) to search for the wireless mic.
4 Follow the instructions on your Calisto screen to complete pairing. Once it is paired, the
wireless mic is connected to your Calisto.
Wearing and Use
The wireless mic can be worn on a collar or lapel. This illustration shows the optimal location.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
The wireless mic can also be placed flat on a table for flexible small group conferencing. It
provides full 360-degree microphone coverage.
• Talk Time: Up to 5 hours
• Standby time: 7 days
• Charging Time: Approximately 2 hours
• Maximum Range: Up to 45 feet/12 meters
Features
1 Once undocked, press the key on the wireless mic to replace the built-in speakerphone
microphone.
2 When the wireless mic is active, the
is displayed on screen and the built-in speakerphone
microphone is turned off. Also note LED on front of unit will go out when remote mic is live.
3 To transfer a call from the wireless mic to the speakerphone and back, press
on the
speakerphone.
4 Talk/End key: Press with one tap to answer or end a call. The key is green when you have an
incoming call, red when you are on a call.
5 Mute/Unmute keys: Press red key on both sides. The keys light up red when a call is muted.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Wireless Mic Usage
Initial
Setting
Answer Call
From...
Which How can i tell How do I
How do I know
the audio
mic
change
Active?
active mics?
changed?
Audio to ‘Speaker Base (push
phone’ selection button
on the base)
Base
LED on front of Pickup mic-clip
You will see the
base is lit when and push mic-clip LED on the base
call answered. hook-switch
turn off and the
button once or … hook-switch button
Hook-switch
on the mic-clip lit
up red when the
mic-clip is active
light on mic-clip push the Audio
will stay off
selection button
(Headset icon) on
the base to make
remote mic active
Audio to ‘Speaker Mic-clip (pickup Mic-Clip LED on front
Push the Audio
LED on the base
phone’
mic-clip and
push hook-
switch button
on the clip)
of base
momentarily
selection button will light and hook-
(headset icon) on switch button on
will go on then the base to switch the mic-clip will
off.
back to base mic turn off
or return the mic-
clip to its docking
station.
Hook switch
light on mic-
clip will go red
Audio set to
‘Wireless mic
Base (push
selection button
Base
LED on front of Pickup mic-clip, it You will see the
base is lit when will immediately LED on the base
(when undocked)’ on the base)
call answered. become active
turn off and the
hook-switch button
on the mic-clip
light up red when
the mic-clip is
active
Hook-switch
light on mic-clip
will stay off
Audio set to
‘Wireless mic
(when undocked)’ answered when
picked up)
Mic-clip
(automatically
Mic-Clip LED on front
of base
LED on front of
base momentarily the base, hook-
will go on then off. switch button on
LED will light on
momentarily
will go on then
off.
the mic-clip will
turn off.
Hook switch light
on mic-clip will
go red
Hook switch
light on mic-clip
will go red
NOTe: If you set Audio to ‘Audio routing set to: Wireless Mic (when undocked)’ it will revert to
‘Audio routing set to Speakerphone’ when mic-clip is returned to the docking station or an active
call is terminated.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Light Indicators
• Charging: Single white flash after docking the wireless mic to the Calisto.
NOTe: The first time you charge your wireless mic, you may see the light glow red quickly before
flashing red.
• Low Battery: Double red flash every 30 seconds.
• Critical Low Battery: Triple red flash every 30 seconds.
• Out of range: Fading red.
NOTe: To check connection status, tap
once. A single white flash indicates that the wireless mic
is connected to your Calisto. If the white flash doesn’t appear, put the wireless mic back in its dock to
charge and try again later. You can also press Menu (right softkey) > Bluetooth on your Calisto and
make sure that Disconnect Wireless Mic is displayed. This means the wireless mic is connected. If
Disconnect Wireless Mic is not displayed, press Setup (right softkey) > Headset or Wireless Mic, and
make sure Wireless Mic is displayed as a paired device. Select Wireless Mic to reconnect.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Disconnect from/Reconnect to a Mobile Phone or
Bluetooth Headset
You can pair your Calisto with up to two mobile phones and two wireless
Bluetooth devices, either during initial setup (see Set Up Your Calisto on
page 6) or from the Settings menu (see Bluetooth Setup on page 30). Pairing
is the equivalent of entering a device into your Calisto’s memory. You only
need to pair each device once.
However, your Calisto can only be connected to one mobile phone and one wireless headset or
wireless microphone at a time. If you have two paired mobile phones or headsets, your Calisto
can manage calls for only one of those phones and one of those headsets at a time.
NOTe: After you pair with a phone or headset, that device automatically becomes the connected
device until you change it.
When you have a Bluetooth headset connected to your Calisto, call audio is routed through the
Calisto speakerphone by default. You can route the call audio through the Bluetooth headset at
any time by pressing the button on the headset or pressing Audio Options on your Calisto.
Your Calisto offers several ways to disconnect from and reconnect to the currently connected
mobile phone and Bluetooth headset. You can disconnect from/connect to each device
separately, or both at the same time.
Disconnect a mobile phone
and/ or Bluetooth headset
When Not on a Call
While on a Call
When you need to leave and
take your mobile phone and/or
When you are on a call routed
through your Calisto and need
Bluetooth headset with you, you to take your call on the road, you
can easily disconnect them.
can easily disconnect.
disconnect using the Bluetooth disconnect using the go Mobile
Menu
Feature
1 Press Menu (right softkey) >
Bluetooth.
1 While on a call, press Options >
Take mobile call on the go
2 Press Disconnect [mobile
phone name], Disconnect
[headset name], or Disconnect
Both.
2 The call audio is transferred to
your mobile phone.
3 If you are using a Bluetooth
headset, follow the onscreen
instructions to connect the
call to your headset using the
headset button or your mobile
phone menu.
disconnect by Walking Out of
range of Your Calisto
Simply grab your mobile phone
and/or Bluetooth headset. Once
out of range of Calisto, they will disconnect by Walking Out of
disconnect and can be used by
themselves. In order to use the
headset directly with mobile
phone, you may need to press
the headset button or go use
the phone’s Bluetooth menu to
connect to the headset.
range of Your Calisto
NOTE: We do not recommend this
approach.
When you are on a call and
walk out of range, the call
may reconnect several times
to your Calisto before finally
disconnecting. This may result in
interrupted audio.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
reconnect a mobile phone and/ or
Bluetooth headset to your Calisto
When you come back in your office, there are several ways to
reconnect your Mobile and/ or BT headset to Calisto.
NOTE: Only one mobile phone and
one Bluetooth headset can be
connected to your Calisto at a time.
reconnect using a screen Prompt
When you are back in range of your Calisto, a notification may
appear on your Calisto screen asking if you want to reconnect to
your mobile phone or headset. Press Yes (right softkey) to connect.
If you’re currently on a call on the mobile phone, the audio is routed
back to your Calisto’s speakerphone.
NOTE: Not all phone and headset models support the notification
feature. Also, if you manually disconnected from a phone or headset, a
notification does not appear when the device is back in range of your
Calisto.
reconnect using the Bluetooth Menu
1. Press Menu (right softkey) > Bluetooth.
2. Press Connect [mobile phone name], Connect [headset name], or
Connect Both.
Connect a different paired mobile
If you have paired more than one mobile phone or Bluetooth
phone or Bluetooth headset to your headset to Calisto, you can choose which paired device to make the
Calisto
active, “connected” device. Your Calisto can be actively connected to
one mobile phone and one Bluetooth headset at a time.
Connect a different Mobile Phone/Headset using Bluetooth setup
1. Press Menu (right softkey) > Bluetooth > Setup.
2 Select Mobile Phone or Headset (& Wireless Mic).
3. Select the phone or headset to which you want to connect.
Download from Www.Somanuals.com. All Manuals Search And Download.
Customize Your Calisto Settings
Use the Settings menu to customize your Calisto and make it work best for
you.
Basic Setup
Basic setup includes ringer volume and tone, screen brightness, date and time format, and
other settings.
set the ringer Volume
1 Press Menu (right softkey) > settings > Basic setup > ringer Volume.
2 Press Control up
or Down
to adjust the onscreen volume slider. To turn the ringer off,
press Control down
until no bars appear in the slider.
NOTE: You can also set the ringer volume using Volume Up and Down when you are not on a
call.
set the ringer Tone
This setting sets the tone for incoming calls.
1 Press Menu (right softkey) > settings > Basic setup > ringer Tones.
2 Highlight a tone.
3 To preview the highlighted tone, press Play (right softkey). To select the highlighted tone, press
save (left softkey).
set the Mic Level
1 Press Menu (right softkey) > settings > Basic setup > Mic Level.
2 Press Control Up
or Down
to adjust the onscreen mic volume level slider.
NOTE: This option appears only if a wired microphone is plugged in.
set the screen Brightness
1 Press Menu (right softkey) > settings > Basic setup > Brightness.
2 Press Control up
or down
to adjust the onscreen brightness slider.
Button Feedback
Can be set to ‘click’, ‘beep’ or silent. When touch feedback is on, a sound plays when you press
the Calisto keys.
1 Press Menu (right softkey) > settings > Basic setup > Button Feedback.
2 Highlight a button feedback tone. To turn button feedback off, highlight silent.
3 To preview the highlighted tone, press Play (right softkey). To select the highlighted tone, press
save (left softkey).
set the Language
1 Press Menu (right softkey) > settings > Basic setup > Language.
2 Select a language.
3 Press save (left softkey).
28
Download from Www.Somanuals.com. All Manuals Search And Download.
set the Country
The country settings affects how your Calisto supports local and international Caller ID
information.
1 Press Menu (right softkey) > settings > Basic setup > Country.
2 Select a country.
3 Press save (left softkey).
Landline setup
If you select United States or Canada you will be presented with a choice to set the Area
Code. Area Code Setup lets you enter your home landline area code and change your
voicemail access number (P830 & P835 only).
For the US and Canada, when you enter your area code, your Calisto automatically adds a “1”
if required when you dial from the call log.
1 Press Menu (right softkey) > Basic settings > Area Code.
2 Enter the area code.
3 Press save (left softkey).
NOTE: This setting does not appear for other countries.
enter Your Voicemail Access Number
Entering your voicemail access number allows one-touch voicemail access. This is the
number your Calisto dials when you press and hold 1.
1 Press Menu (right softkey) > settings > Landline setup > Voicemail Access.
2 Enter the number.
3 (Optional) Select insert pause to enable automatic chain dialing. Chain dialing allows you
to pre-program a sequence of numbers to dial, so that your phone automatically dials your
voicemail password after dialing your voicemail access number. To use chain dialing, enter
the required digits followed by one or more pauses between the various digits.
4 Press save (left softkey).
reset the Voicemail indicator
Occasionally, your analog landline phone service provider might indicate that you have new
voicemail messages, even if you have listened to all your messages. If your Calisto screen
displays new messages even if you don’t have any, reset the voicemail indicator to fix the
problem.
1 Press Menu (right softkey) > settings > Landline setup > reset Voicemail indicator.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Bluetooth setup
Pair with a Mobile Phone or Bluetooth Headset
Use Bluetooth Setup to pair your Calisto with a new mobile phone or Bluetooth headset.
1 Press Menu (right softkey) > settings > Bluetooth setup.
2 Select Mobile Phone or Headset (or Wireless Mic).
NOTE: If you purchase a PA50 wireless mic (sold separately), the Wireless Mic option appears on
this screen also.
3 Follow the onscreen instructions to pair your device with your Calisto.
Change the Connected Phone or Headset
If you have more than one mobile phone or Bluetooth headset paired with your Calisto, you
can change the connected phone or headset. You can have only one connected phone or
headset at a time. See Disconnect from/Reconnect to a Mobile Phone or Bluetooth Headset
on page 26 for instructions.
remove a Phone or Headset from Calisto Memory
If you no longer want to use a mobile phone or Bluetooth headset with your Calisto, you can
remove the device from the Calisto memory, so it no longer appears on the list of paired
devices.
1 Press Menu (right softkey) > settings > Bluetooth setup.
2 Select Mobile Phone or Headset.
3 Select the phone or headset you want to remove from memory.
4 Press delete (right softkey).
5 Press Yes (right softkey) to confirm.
Advanced setup
Advanced Setup lets you return to and modify the initial setup screens.
1 Press Menu (right softkey) > settings > Advanced setup.
2 Select one of the following:
• setup Assistant: See Set Up Your Calisto on page 6.
• Factory reset: Select to restore your Calisto to the original factory settings. This erases all
favorites and call log entries, and deletes any paired Bluetooth devices from your Calisto’s
memory.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
I have my headset and
Automatic Reconnect:
mobile connected; how
do I connect them both to
Calisto 800?
• If a Voyager Pro+ or Voyager Pro UC is used, go to “Bluetooth” menu in
Calisto and select “Connect Both”. They should both automatically reconnect
even if Headset is still actively connected to the Mobile. These 2 headsets have
special firmware to allow automatic reconnect.
Note: If an iPhone is used, it should also allow the automatic reconnect.
Unlike Blackberry, iPhone supports Multipoint capability, allowing the
iPhone to retain a BT connection both to the Bluetooth headset and Calisto
at the same time.
Manual Reconnect:
• If a different Bluetooth headset is used, user first needs to go in their Mobile
menu and disconnect the Bluetooth headset from the Mobile. User then goes
to “Bluetooth” menu in Calisto and selects “Connect Both”.
Note:
• In a few rare instances, “Connect both” may succeed on the 2nd attempt as
opposed to the 1st. This is due to a conflict between Bluetooth reconnection
attempts between Mobile and Calisto that happen to occur at same time.
• “Connect both” or “Connect Mobile” or “Connect Headset” on-screen
options also allow a user to reconnect a live call back to Calisto.
Can I use the same headset • Yes, but unless your headset is a Voyager Pro+ or Voyager Pro UC, or your
with Calisto 800 and my
Mobile Phone?
Mobile phone is an iPhone, you will first need to go in the Mobile BT menu to
disconnect the headset from the Mobile Phone before reconnecting it to
Calisto 800.
• Most Mobile Phones today – outside of iPhones - do not support Multipoint
which means that they can’t both be connected to a Bluetooth headset and
Calisto at the same time.
What Bluetooth headset
does Plantronics
recommend for
• Voyager Pro+ is the recommended headset it supports wideband audio.
• Voyager Pro UC v2 is also recommended but users need to be aware that
plugging the Bluetooth Dongle into the USB port at the same time as Calisto,
will require user to select which device to route audio to.
Calisto 800?
If I am on a Mobile call via
Calisto, can I transfer the
audio back to my Mobile/
Headset if I need to leave?
• Yes, during the call, select “Options” and then “Take Mobile Call On the Go” on
the Calisto screen.
• If a Mobile phone is connected, the audio is automatically transferred back
into the Mobile Handset
• If a Mobile Phone and a Bluetooth headset are connected, the audio is
automatically transferred back into the Mobile Handset. The Calisto screen
prompts the user to either press the Headset button (for Voyager Pro+ or
Voyager Pro UC v2) or go in the Mobile menu to transfer audio back to the
Headset.
Note: “Transfer Audio to Mobile” is an alternative option to “Take Mobile call on
the Go”. The only difference is that it keeps the call information on screen
Can I use both a PA50
Wireless Mic and Bluetooth
Headset with Calisto? Or
can I use 2 different Mobile
Phones?
• Yes, but you will need to decide which of the 2 to actively connect.
• Go to “Mobile” menu to view which of the 2 devices is currently connected (it
should say “Disconnect” Vpro if Vpro is currently connected). Select “Setup” and
follows the instructions to select a different Headset or Mobile Phone.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
The Tx or Rx audio quality
on my Calisto sounds
muffled or distorted?
• If the Calisto unit is used by several people at the same time, users should
be positioned either in front or the back of the unit for optimal microphone
pick-up.
• For small group calls, we highly recommend that the PA50 Wireless Mic be
used as it provides flexible 360 degree room coverage.
The Wireless PA50 Mic
doesn’t seem to work
as well as the Calisto
speakerphone?
• First, make sure the PA50 Mic is indeed turned on (see above question).
• Second, make sure the PA50 Mic is placed on lapel in the optimal location
shown here.
• It can also be placed flat on a table for group calls but in that case, more
background noise/room echo will be picked up
When I plug the unit into the • First, make sure MSFT OC R2/Lync is up and running
USB port, the unit says “PC
unavailable”?
• Second, go into MSFT OC “Tools/ Set up Audio and Video” and make sure
“Calisto 800 Series” is selected as the Speaker and Microphone
• Third, go to the PC System Audio Settings and similarly make sure “Calisto
800 Series” is selected as the Default device for “Playback” and “Recording”
(optional).
• Reboot the PC and the unit (both USB and AC) and try again. When plugging
the unit into the USB port, make sure that the “Hardware is detected”.
How do I know what version • Go in Menu> Settings> About Calisto
of firmware/software I am
using?
Some keys on the dialpad do • The keypad sensors adapt to a user’s touch as much as the user also gets
not seem to respond when I used to them. Just like with Touchscreens, it may take a few hours for the user
hit them?
and the unit to get fully “calibrated”!
Call Control doesn’t work
when I use Skype, Avaya
or other non Micosoft
Lync/Office Comminicator
softphones?
• Call control for softphones other than Lync/Microsoft Office Communicator
will be available later in 2011
When I try to redial an entry • Today Lync/Microsoft Office Communicator pass incomplete Call Information
in the Call Log, I get an
error message that the call
cannot be dialed?
back to Calisto in some cases
32
Download from Www.Somanuals.com. All Manuals Search And Download.
Can I access Voicemail on
Calisto?
• Yes, Calisto supports PSTN Voicemail and Lync/Microsoft Office
Communicator R2 Voicemail. In the case of PSTN, it requires the user subscribe
to the service from their phone provider and enter the Voicemail Access
number under Settings>Landline Voicemail>Voicemail Access. In the case of
Lync/Microsoft Office Communicator R2, it requires an enterprise to have
enabled Unified Messaging application from Microsoft.
• When either a PSTN or R2/ Lync voicemail is left, a large “Envelope” icon is
displayed on Capriana screen. By pressing the “1” key for 3 seconds, the user
is able to trigger and listen to the voicemail from both Lync/Microsoft Office
Communicator R2 and PSTN.
My wireless mic didn’t
connect to my Calisto.
Please try pairing the wireless mic and your Calisto again (see Use Your
Calisto with a Wireless Mic on page 22). In the unlikely event that this doesn’t
fix the problem, simultaneously press the handset icon
and mute button
on wireless mic for six seconds to re-boot the wireless mic. After doing this
replace mic in the docking station
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Need MOre HeLP?
plantronics.com/support
Plantronics, inc.
345 Encinal
Santa Cruz, CA 95060
United States
Tel: 800-544-4660
plantronics.com
© 2011 Plantronics, Inc. All rights reserved. Plantronics, the logo design, PA50 and Calisto are trademarks or registered trademarks of Plantronics, Inc. Lync is a
registered trademark of Microsoft Corporation in the United States and/or other countries.
85433-01 (01.11)
Download from Www.Somanuals.com. All Manuals Search And Download.
|