10/100/1000Mbps
Gigabit Ethernet Smart Swtich
GSW-601S
User’s Manaul
Download from Www.Somanuals.com. All Manuals Search And Download.
TABLE OF CONTENTS
1. INTROUCTION ....................................................................7
1.1 CHECKLIST.......................................................................7
1.2 ABOUT THE SWITCH..........................................................7
1.3 FEATURES........................................................................8
1.4 SPECIFICATIONS .............................................................10
2. HARDWARE DESCRIPTION.............................................11
2.1 FRONT PANEL.................................................................11
2.2 REAR PANEL ..................................................................13
2.3 HARDWARE INSTALLATION...............................................13
3.CONFIGURATION..............................................................17
3.1 CONNECT TO PC........................................................17
3.2 MAIN MENU ....................................................................18
3.3 SUBMENU: (0) PORT SETTING .........................................19
3.4 SUBMENU :(1) VLAN ......................................................20
3.5 SUBMENU: (2) TRUNK...................................................21
3.6 SUBMENU: (3) AGING CONTROL ......................................22
3.7 SUBMENU: (4) PORT ENABLE/DISABLE ............................23
3.8 SUBMENU: (5) PORT MIRRORING.....................................24
3.9 SUBMENU: (6) PORT-BASE PRIORITY...............................25
3.10 SUBMENU: (7) MAC ADDRESS FILTER.............................26
3.11 SUBMENU: (8) CHANGE PASSWORD...............................27
3.12 SUBMENU: (9) RESTORE TO FACTORY DEFAULT ............27
4 SWITCH OPERATION........................................................28
4 SWITCH OPERATION........................................................29
4.1 ADDRESS TABLE.............................................................29
4.2 LEARNING.......................................................................29
4.3 FORWARDING & FILTERING .............................................29
4.4 STORE-AND-FORWARD ...................................................30
4.4 AUTO-NEGOTIATION........................................................31
5. TROUBLESHOOTING.......................................................33
GSW-601S User's Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
A.1 SWITCH‘S RJ-45 PIN ASSIGNMENTS ...............................35
A.2 10/100MBPS, 10/100BASE-TX ......................................35
A.3 RJ-45 CABLE PIN ASSIGNMENT........................................36
PLANET NOVASwitch series
Download from Www.Somanuals.com. All Manuals Search And Download.
This page intentionally left blank!
GSW-601S User's Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
1. INTROUCTION
1.1 Checklist
Check the contents of your package for following parts:
l
l
l
l
l
GSW-601S.
User's manual.
Power cord.
19” rack mount brackets.
RS-232 cable.
If any of these pieces are missing or damaged, please
contact your dealer immediately, if possible, retain the
carton including the original packing material, and use them
against to repack the product in case there is a need to
return it to us for repair.
1.2 About the Switch
The Switch GSW-601S is designed to allow simultaneous
transmission of multiple packets via an internal high-speed
data channel. This means that it can partition a network
more efficiently than bridges or routers in most
environments.
The Switch is equipped with Category 5 copper cable or
fiber optic cable for uplinking to a network backbone or
network server. It is compatible with all 10Mbps, 100Mbps
and 1000Mbps Ethernet environments. The increased
speed and extra bandwidth offered by Gigabit Ethernet will
support faster and more users applications with generating
more traffic.
7
GSW-601S User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
In addition, the Switch is also support one module slot for 2
Gigabit Ethernet ports to uplink to a server or network
backbone. These Switches are designed for Plug and Play
installation, allows the network administrator to simply
connect the network and power cables and the
Switching/bridging functions begin automatically.
The front panel of these Switches provide LEDs for easy
recognition of the switch operation status and for
troubleshooting. These LEDs display the power status for
the system and link/ speed/ collision, full-duplex, transmit
and receive status for each port.
The built-in console interface can be used to configure the
Switch’s setting for VLAN, and Port Trunk Groups, Port
Mirroring and Port Speed, Port enable/ disable.
1.3 Features
w Complies with the IEEE802.3, IEEE802.3u, IEEE802.3z and
IEEE802.3ab Gigabit Ethernet standard, IEEE802.1p Priority
Queues
w Provide a module slot for 2-port 10/100/1000Mbps-TX or
1000Mbps-SX option of modules.
w Features Store-and-Forward mode with wire-speed filtering
and forwarding rates
w Each port can be configured to 10/100Mbps half or
full-duplex, or to 1000Mbps full-duplex mode
w Automatic source address learning and aging.
w Support up to 8K MAC address
w Support up to total 512Kbyte packet buffer
w IEEE802.3x compliant full-duplex flow control, HOL blocking
prevention
w Broadcast storm control, runt and CRC Filtering eliminates
erroneous packets to optimize the network bandwidth
8
PLANET NOVASwitch series
Download from Www.Somanuals.com. All Manuals Search And Download.
w Support to handle up to 1522 bytes packet
w LED indicators for simple diagnostics and management
w Provide a reset switch in front panel
w Internal power supply
w Auto MDI/ MDI-X on each port
w Smart function for advanced configuration:
- Support one console port for switch configuration change,
- Support per port Port-based VLAN and L2 Trunking with
link redundancy, load balancing
- Support four Class of Service (CoS) queues per egress
port
- Support per port setting, enabled/ disabled
- Support port mirroring
- Support 24 MAC address filtering
- Support password setting
9
GSW-601S User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
1.4 Specifications
Standard
IEEE802.3, IEEE802.3u, IEEE802.3ab, IEEE802.3x
10Base-T,UTP/STP category 3 or 5 cable
100Base-TX,UTP/STP category 5 cable
1000Base-T,UTP/STP category 5e cable, 4 pairs
Network
Media:
1000Base-SX,Multi-mode 62.5/125μm, 50/125μm
fiber optic cable
STP RJ-45 port for 10/100/1000MbpsTX
SC connector for 1000Mbps SX
Power, Smart
Connector
Individual port (copper)—1000,100,10
FDX/COL, TX, RX
LED
indicators
Individual port (fiber) —Link, Activity
440mm(L) x 245mm(W) x 45mm(H)
Operating —0℃ to 40℃ Storage—20℃ to 70℃
Dimension
Temperature
Operating — 10% to 90%RH
Humidity:
Storage — 5% to 90%RH
Input Power
Requirement
100-240VAC,50-60Hz,Auto-sensing
Registrations FCC Class A,CE,CUL,TUV,LVD
*After module installed
10
PLANET NOVASwitch series
Download from Www.Somanuals.com. All Manuals Search And Download.
2. HARDWARE DESCRIPTION
This product series provide three different running speed –
10Mbps, 100Mbps, and 1000Mbps in the same switch and
automatically distinguish the speed of incoming connection.
This section describes the hardware features of these Switches.
For easier management and control of the switch, familiarize
yourself with its display indicators, and ports. Front panel
illustrations in this chapter display the unit LED indicators.
Before connecting any network device to the switch, read this
chapter carefully
There are two choice of different module for expansion:
l
l
2port Copper module
2port Fiber module
2.1 Front Panel
The unit front panel provides a simple interface monitoring
the switching hub. It includes a power smart and port
indicator for each port.
GSW-601S Switch front panel
11
GSW-601S User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
GSW-2GT module front panel
GSW-2SX module front panel
LED indicators
GSW-601S and GSW-2GT
PWR
Green Lit: Power on
SMART
Green Lit: CPU initial completed
Lit: indicate link status and traffic
Green Speed (10 for 10M, 100 for 100M,
1000 for 1000M)
Lit: indicate data traffic status
Green (TX for transmitting, RX for
receiving)
10/100/1000
TX/ RX
Lit: Full-Duplex
FDX/ COL
Green Blink: Half-Duplex/ Collision
Off: Half-duplex or not connected
GSW-2SX
LINK
Green Lit: indicate link status and traffic
speed
ACT
Green Blink: activity
Reset button
At the right side of front panel, the reset button is designed
for reconfiguring the switch without turn off and on the
power.
12
PLANET NOVASwitch series
Download from Www.Somanuals.com. All Manuals Search And Download.
2.2 Rear Panel
The rear panel of the Switch indicates a AC inlet power
socket, which accepts input power from 100 to 240VAC,
50-60Hz. And a RS-232 console port for setting up the
switch via a connection to a terminal or PC using a terminal
emulation program.
Power Notice:
1.The device is a power-required device, it means, it will
not work till it is powered. If your networks should active
all the time, please consider using UPS (Uninterrupted
Power Supply) for your device. It will prevent you from
network data loss or network downtime.
2.In some area, installing a surge suppression device may
also help to protect your switch from being damaged by
unregulated surge or current to the Switch or the power
adapter.
2.3 Hardware Installation
2.3.1 Connecting end node or hub or switch
1. Place the Switch on a smooth surface or fasten the
mounting brackets with the provided screws in a
standard 19” rack.
2. Connect switch or PC to one port of the Switch using
Category 3/4/5 UTP/STP cabling.
3. Connect another switch or PC to the other port of
Switch by following the same process as described in
Step3.
Notice:
Cable distance for Switch
The cable distance between Ethernet Switch and hub/PC
should not exceed 100 meter for UTP/STP cable, 220m
for 62.5/125 fiber cable and 500m for 50/125 fiber cable.
13
GSW-601S User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Make sure the wiring is correct
It can be used Category 3/4/5 cable in 10 Mbps operation.
To reliably operate your network at 100Mbps and
1000Mbps, you must use an Unshielded Twisted-Pair
(UTP) Category 5 cable, or better Data Grade cabling.
While a Category 3 or 4 cable may initially seem to work,
it will soon cause data loss.
2.3.2 Connecting to Network Backbone or
Server
Connect to the Gigabit Ethernet ports with Category 5
copper cable or fiber optic cable for uplinking to a
network backbone or network server. These ports
operate at 1000Mbps in full-duplex mode. A valid
connection is indicated when the Link LED is light. The
following sections describe the function of LEDs on the
front panel
CPU LED
Green
Smart
Color
Label
Function: The LED light up steadily means CPU
completed to initial the switch.
Power LED
Green
PWR
Color
Label
Function: The LED light up steadily means Power turned
on.
14
PLANET NOVASwitch series
Download from Www.Somanuals.com. All Manuals Search And Download.
Link/Speed LED
Green
Color
10/100/1000
Label
The LED light up steadily to indicate the
Function
transmitting speed
light up steadily to indicate link up at speed
10
10M
light up steadily to indicate link up at speed
100M
Light up steadily to indicate link up at speed
1000M
100
1000
Full/ Half Duplex and Collision LED
Green
FDX / COL
Color
Label
Function: The indicator LED flash up whenever there is a
collision between a directly attached end node and any
other node, and light up steadily for Full-duplex mode.
TX Activity
Green
TX
Color
Label
Function: Each RJ45 station port on the switch is
assigned one LED for transmitting the data.
RX Activity
Green
RX
Color
Label
Function: Each RJ45 station port on the switch is
assigned one LED for receiving the data.
15
GSW-601S User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
This page intentionally left blank!
16
PLANET NOVASwitch series
Download from Www.Somanuals.com. All Manuals Search And Download.
3.CONFIGURATION
3.1 CONNECT TO PC
RS-232 serial cable
Prepare a RS-232 serial cable. Attach the 9-pin female
connector to the male connector on the switch. Plug the
other side of this cable to your PC.
Hyper Terminal
In Windows 95/98/2000/XP,launch “HyperTerminal”,
create a new connection, and adjust settings as below:
17
GSW-601S User's Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
3.2 Main Menu
Launch the new terminal you just set up, and then, turn on
the switch. See the following messages for successful
connection.
PLANET GSW-601S Gigabit Ethernet Smart Switch
Configuration menu [ver. :x.xx]
(0) Port Setting
(1) VLAN
(2) Trunk Port
(3) Aging Control
(4) Port Enable/Disable
(5) Port Mirroring
(6) Port-base priority
(7) Mac address filter
(8) Change password
(9) Restore to Factory Default
Select :>>
To enter any of the submenus, simply type the number
on the command line.
Download from Www.Somanuals.com. All Manuals Search And Download.
3.3 Submenu: (0) Port Setting
[Port Setting]
[1] [2] [3] [4] [5] [6] [7] [8]
Auto Neg. O
O
O
O
O
O
O
O
Speed
1000 1000 1000 1000 1000 1000 1000 1000
Duplex
F
F
O
F
O
F
O
F
O
F
O
F
O
F
O
Flow Control O
[Tab]
: Move to next item
[Space Bar] : Toggle item
[S]
[Q]
: Save & Exit
: Quit
[U]:Up,
[L]:Left
[D]:Down,
[R]:Right
Use Tab or “U”,”D”,”L”,”R” to move the item which to be
change, press space bar to change it, ”S” for save this
configuration.
19
GSW-601S User's Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
3.4 Submenu :(1) VLAN
[Port base VLAN]
[1] [2] [3] [4] [5] [6] [7] [8]
[Group 1]
[Group 2]
[Group 3]
[Group 4]
[Group 5]
[Group 6]
[Group 7]
[Group 8]
O
x
x
x
x
x
x
x
O
x
x
x
x
x
x
x
O
x
x
x
x
x
x
x
O
x
x
x
x
x
x
x
O
x
x
x
x
x
x
x
O
x
x
x
x
x
x
x
O
x
x
x
x
x
x
x
O
x
x
x
x
x
x
x
member port of trunk group must belong to same VLAN
[Tab] : Move to next item
[Space Bar] : Toggle item
[S]
: Save & Exit
: Quit
[Q]
[U]:Up,
[D]:Down,
[L]:Left
[R]:Right
Oàenables the port you select
Xàdisables the port you select
Use Tab or “U”,”D”,”L”,”R” to move the item which to be change,
press space bar to change it, ”S” for save this configuration
20
PLANET NOVASwitch series
Download from Www.Somanuals.com. All Manuals Search And Download.
3.5 Submenu: (2) TRUNK
[TRUNK]
[1] [2] [3] [4] [5] [6] [7] [8]
[GROUP 1]
[GROUP 2]
[GROUP 3]
[GROUP 4]
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
member port of trunk group must belong to same VLAN
[Tab]
: Move to next item
[Space Bar] : Toggle item
[S]
[Q]
: Save & Exit
: Quit
[U]:Up,
[L]:Left
[D]:Down,
[R]:Right
Oàenables the port you select
Xàdisables the port you select
Trunk port members must belong to same VLAN group.
Use Tab or “U”,”D”, “R”,”L” to move the item which to be
change, press
space bar to change it, ”S” for save this configuration
21
GSW-601S User's Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
3.6 Submenu: (3) Aging Control
[Port aging]
aging time
/minutes/
[Tab]
[1] [2] [3] [4] [5] [6] [7] [8]
10 10 10 10 10 10 10 10
: Move to next item
[Space Bar] : Toggle item
[S]
[Q]
: Save & Exit
: Quit
Use Tab or “L”,”R” to move the item which to be change,
press space bar to change it, ”S” for save this
configuration
22
PLANET NOVASwitch series
Download from Www.Somanuals.com. All Manuals Search And Download.
3.7 Submenu: (4) Port Enable/Disable
[Port Enable/Disable]
[1] [2] [3] [4] [5] [6] [7] [8]
Port Status
[Tab]
O
O
O
O
O
O
O
O
: Move to next item
[Space Bar] : Toggle item
[S]
[Q]
: Save & Exit
: Quit
Oàenables the port you select
Xàdisable the port you select, any packet cannot be
transmitted to this port
Use Tab or “L”,”R” to move the item which to be change,
press space bar to change it, ”S” for save this configuration
23
GSW-601S User's Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
3.8 Submenu: (5) Port Mirroring
[Port Mirroring]
[1] [2] [3] [4] [5] [6] [7] [8]
Monitoring Port
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
Egress
Port
Port
Ingress
Egress Port : the packets out-going this port
will be duplicate to Monitoring Port
Ingress Port: the packets in-coming this port
will be duplicate to Monitoring Port
[Tab]
: Move to next item
[Space Bar] : Toggle item
[S]
: Save & Exit
: Quit
[Q]
[U]:Up,
[D]:Down,
[L]:Left
[R]:Right
Use Tab or “L”,”R” to move the item which to be change,
press space bar to change it, ”S” for save this configuration
24
PLANET NOVASwitch series
Download from Www.Somanuals.com. All Manuals Search And Download.
3.9 Submenu: (6) Port-base Priority
[Port-base priority]
[1] [2] [3] [4] [5] [6] [7] [8]
level
T
T
T
T
T
T
T
T
/ T : the priority depend on 802.1p /
/ 1 : lowest ingress priority /
/ 4 : highest ingress priority /
[Tab]
: Move to next item
[Space Bar] : Toggle item
[S]
[Q]
: Save & Exit
: Quit
Use Tab or “L”,”R” to move the item which to be changed,
press space bar to change it, ”S” for save this configuration
25
GSW-601S User's Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
3.10 Submenu: (7) Mac address filter
[Mac address filter]
00-00-00-00-00-00 00-00-00-00-00-00 00-00-00-00-00-00
00-00-00-00-00-00 00-00-00-00-00-00 00-00-00-00-00-00
00-00-00-00-00-00 00-00-00-00-00-00 00-00-00-00-00-00
00-00-00-00-00-00 00-00-00-00-00-00 00-00-00-00-00-00
00-00-00-00-00-00 00-00-00-00-00-00 00-00-00-00-00-00
00-00-00-00-00-00 00-00-00-00-00-00 00-00-00-00-00-00
00-00-00-00-00-00 00-00-00-00-00-00 00-00-00-00-00-00
00-00-00-00-00-00 00-00-00-00-00-00 00-00-00-00-00-00
Packets with source Mac address not equal to
00-00-00-00-00-00 will be discarded
[Tab]
: Move to next item
[U]:Up,
[L]:Left
[SpaceBar]:ModifyMacAddress
[D]:Down, [R]:Right
[S]
[Q]
: Save & Exit
: Quit
Use Tab or ”U”, ”D”, “L”,”R” to move the item which to be
change, press space bar or enter key to modify MAC
address,”S” for save this configuration
26
PLANET NOVASwitch series
Download from Www.Somanuals.com. All Manuals Search And Download.
3.11 Submenu: (8) Change password
/ 6 characters max. /
/ Enter key to delete password /
new password : *****
reconfirm : *****
User can set password for security, press enter key to
disable password checking when system boot.
3.12 Submenu: (9) Restore to Factory Default
This item will restore configuration to such setting
1.
Port with auto-negotiation, 1000M, full duplex,
flow-control enables
2.
3.
4.
All ports assigned to one VLAN
Disable trunk setting
Enable transmit and receive packets capability of all
ports
5.
6.
7.
8.
Enable address aging capability to 10 minutes
Disable port-mirroring capability
Priority of all port depend on 802.1p
Disable password checking when system boot
27
GSW-601S User's Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
This page intentionally left blank!
28
PLANET NOVASwitch series
Download from Www.Somanuals.com. All Manuals Search And Download.
4 SWITCH OPERATION
4.1 Address Table
The Switch is implemented with an address table. This
address table composed of many entries. Each entry
is used to store the address information of some node
in network, including MAC address, port no, etc. This
information comes from the learning process of
Ethernet Switch.
4.2 Learning
When one packet comes in from any port, the Switch
will record the source address, port no. and the other
related information in address table. This information
will be used to decide either forwarding or filtering for
future packets.
4.3 Forwarding & Filtering
When one packet comes from some port of the
Ethernet Switching, it will also check the destination
address besides the source address learning. The
Ethernet Switching will lookup the address-table for
the destination address. If not found, this packet will
be forwarded to all the other ports except the port
which this packet comes in. And these ports will
transmit this packet to the network it connected. If
found, and the destination address is located at
different port from this packet comes in, the Ethernet
Switching will forward this packet to the port where
this destination address is located according to the
information from address table. But, if the destination
address is located at the same port with this packet
comes in, then this packet will be filtered. Thereby
increasing the network throughput and availability
29
GSW-601S User's Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
4.4 Store-and-Forward
Store-and-Forward is one type of packet-forwarding
techniques. A Store-and Forward Ethernet Switching
stores the incoming frame in an internal buffer, do the
complete error checking before transmission. Therefore,
no error packets occurrence, it is the best choice when a
network needs efficiency and stability.
The Ethernet Switch scans the destination address from
the packet-header, searches the routing table provided for
the incoming port and forwards the packet, only if required.
The fast forwarding makes the switch attractive for
connecting servers directly to the network, thereby
increasing throughput and availability. However, the
switch is most commonly used to segment existing hubs,
which nearly always improves overall performance. A
Ethernet Switching can be easily configured in any
Ethernet network environment to significantly boost
bandwidth using conventional cabling and adapters.
Due to the learning function of the Ethernet switching, the
source address and corresponding port number of each
incoming and outgoing packet are stored in a routing table.
This information is subsequently used to filter packets
whose destination address is on the same segment as the
source address. This confines network traffic to its
respective domain, reducing the overall load on the
network.
The Switch performs "Store and forward" therefore, no
error packets occur. More reliably, it reduces the
re-transmission rate. No packet loss will occur.
30
PLANET NOVASwitch series
Download from Www.Somanuals.com. All Manuals Search And Download.
4.4 Auto-Negotiation
The STP ports on the Switch have built-in
“Auto-negotiation”. This technology automatically sets the
best possible bandwidth when a connection is established
with another network device (usually at Power On or
Reset). This is done by detect the modes and speeds at
the second of both device is connected and capable of,
Both 10Base-T and 100Base-TX devices can connect with
the port in either Half- or Full-Duplex mode. 1000Base-T
and 1000Base-SX can only connected in Full-duplex
mode.
31
GSW-601S User's Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
This page intentionally left blank!
32
PLANET NOVASwitch series
Download from Www.Somanuals.com. All Manuals Search And Download.
5. TROUBLESHOOTING
This chapter contains information to help you solve problems. If
Giga Switch is not functioning properly, make sure the Ethernet
Switch was set up according to instructions in this manual.
The Link LED is not lit
Solution:
Check the cable connection and remove duplex mode of the
Giga Switch
Some stations can not talk to other stations located on
The other port
Solution:
The address table may contain older information than of the
address table of that node. Please power down to refresh
the address information
33
GSW-601S User's Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
This page intentionally left blank!
34
PLANET NOVASwitch series
Download from Www.Somanuals.com. All Manuals Search And Download.
APPENDIX A
A.1 Switch‘s RJ-45 Pin Assignments
1000Mbps,1000Base T
Contact
MDI
MDI-X
BI_DB+
BI_DB-
BI_DA+
BI_DD+
BI_DD-
BI_DA-
BI_DC+
BI_DC-
1
2
3
4
5
6
7
8
BI_DA+
BI_DA-
BI_DB+
BI_DC+
BI_DC-
BI_DB-
BI_DD+
BI_DD-
Implicit implementation of the crossover function within a
twisted-pair cable, or at a wiring panel, while not expressly
forbidden, is beyond the scope of this standard.
A.2 10/100Mbps, 10/100Base-TX
Contact
MDI
1
MDI-X
1
2
3
6
3
6
1
2
2
3
6
35
GSW-601S User's Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
A.3 RJ-45 cable pin assignment
6
321
6
321
6
3
2 1
36
PLANET NOVASwitch series
Download from Www.Somanuals.com. All Manuals Search And Download.
ISO9002
EM-GSW6V1
Download from Www.Somanuals.com. All Manuals Search And Download.
|