Planet Technology Network Card PL 103E User Manual

Powerline Communication  
Powerline Ethernet Bridge PL-103E  
USB Powerline Adapter - PL-103U  
USERS MANUAL  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Important Safety Instructions  
1. Read these instructions carefully.  
2. Follow all warnings and instructions marked on the product.  
3. Unplug this product from the wall outlet before cleaning. Do not use liquid  
cleaners or aerosol cleaners. Use a damp cloth for cleaning.  
4. Do not use this product near water.  
5. This product should never be placed near or over a radiator or heat register,  
or in a built-in installation unless proper ventilation provided.  
6. This product should be operated from the type of power indicated on the  
marking label. If you are not sure of the type of power available, consult your  
dealer or local power company.  
7. This product relies on the buildings electrical installation for short-circuit  
(over current) protection. Ensure that a fuse or circuit breaker no larger than  
120 VAC or 240 VAC (depends on the power supply type in your country) is  
used on the phase conductors (all current-carrying conductors).  
8. Plug the device directly into a 120 VAC or 240 VAC (depends on the power  
supply type in your country) wall outlet. Do not use an extension cord  
between the adapter and the AC power source.  
9. Do not attempt to service this product yourself, as opening or removing  
covers may expose you to dangerous voltage points or other risks as well as  
ruin product warranty. Refer all servicing to qualified service personnel.  
10. Unplug the AC coupler from the wall outlet and refer the product to  
qualified service personnel for the following conditions:  
- If liquid has been spilled into the product.  
- If the product has been exposed to rain or water.  
- If the product does not operate normally when the operating instructions  
are followed.  
- If the product exhibits a distinct change in performance.  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
Table of Content  
1. Introduction.................................................................................................. 1  
1.1 Powerline Ethernet Bridge PL-103E................................................ 1  
1.1.1 Features..................................................................................... 2  
1.1.2 Package Content......................................................................... 2  
1.1.3 Hardware Description .................................................................. 2  
1.1.4 System Requirements.................................................................. 3  
1.2 USB to Powerline Network Adapter PL-103U.................................. 4  
1.2.1 Features..................................................................................... 4  
1.2.2 Package Contents ....................................................................... 4  
1.2.3 Hardware Description .................................................................. 5  
1.2.4 System Requirements.................................................................. 6  
1.3 Specification....................................................................................... 6  
2. Planning your Powerline Network................................................................ 8  
3. Powerline Ethernet Bridge Installation......................................................... 9  
3.1 Hardware Installation.......................................................................... 9  
3.2 Driver Installation................................................................................ 9  
4. Powerline USB Adapter Installation........................................................... 10  
4.1 Connecting USB to Powerline Network Adapter............................... 10  
4.2 Powerline USB Adapter Driver Installation ....................................... 10  
5. Powerline Configuration Utility................................................................... 13  
5.1 Install the Powerline Configuration Utility ......................................... 13  
5.2 Using the Powerline Configuration Utility ......................................... 14  
5.3 Uninstalling the Powerline Configuration Utility ................................ 18  
6. Troubleshooting......................................................................................... 19  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
1. Introduction  
Powerline communication is revolution in home and small office networking, greatly  
simplifying the task of installing a high-speed local area network. With PLANETs  
powerline communication products, you can utilize existing AC power outlets and  
wires to connect your computers, servers and other devices safely, securely and at  
true LAN speeds of up to 14Mbit/second. No complex and expensive specialized  
wiring usually associated with LANs is required, or management, security and  
interference problems associated with 802.11x wireless technologies just  
convenient, reliable, secure and simple networking where you need it most.  
PLANETs Powerline products allow you to place a computer anywhere in your home  
or small office with flawless, uninterrupted high-speed network connection, simply by  
plugging your computers Ethernet or USB interface into PL-103E/U equipped power  
outlet and youre almost guaranteed to have one of these wherever you need it.  
The PL-103E is a Powerline to Ethernet Bridge with a 10base-T RJ-45 Ethernet  
interface for directly connecting to a computers Ethernet card or existing Ethernet  
switch, hub or broadband router. The PL-103U is an USB to Powerline network  
adapter with an USB type B connector for directly connecting to computers USB port.  
Both of them provide a power socket for connecting to wall outlet.  
Security of PLANETs Powerline communication technology is assured by the use of  
56-bit DES encryption the same system used to protect banking systems all over  
the world, and is interference free, avoiding the problems of wireless systems.  
1.1 Powerline Ethernet Bridge PL-103E  
The PLANET Powerline Ethernet Bridge PL-103E offers a complete Internet  
connection solution for your home powerline network. The PL-103E makes sharing  
your high-speed broadband Internet access easier than ever. Build a strong and  
simple-to-use home network by taking advantage of the most pervasive medium -  
powerline.  
The PL-103E is ideal for users who already have a router. It can be plugged into an  
Ethernet port on a router to equip a network with powerline capabilities and take  
advantage of the router's features. The PL-103E can also be plugged directly into a  
1
Download from Www.Somanuals.com. All Manuals Search And Download.  
cable or DSL modem to allow Internet access and data transfer rates up to 14Mbps  
over powerline.  
1.1.1 Features  
w
w
w
HomePlug Powerline Alliance Specification 1.0 compliant  
Built-in power plug for both powerline network and power supply  
Connects 10/100 Ethernet network to powerline Network for seamless  
integration  
w
w
w
w
w
w
w
w
56-bit data encryption to ensure data security and reliability  
Easy to use Windows-based security key configuration utility  
Easy to read LED indicators  
Support CSMA/CA protocol on power line interface  
Up to 300m between powerline nodes  
Plug-and-play operation provides easy setup  
Shares internet access across your entire home powerline network  
Up to 14 Mbps data transfer over powerline  
1.1.2 Package Content  
Check the contents of your package for following parts:  
n One Powerline Ethernet Bridge  
n One RJ-45 cable  
n One Manual and Utility CD-ROM  
n One Quick Installation Guide  
If any of these pieces are missing or damaged, please contact your dealer  
immediately, if possible, retain the carton including the original packing material,  
and use them against to repack the product in case there is a need to return it to us  
for repair.  
1.1.3 Hardware Description  
PL-103E front panel:  
2
Download from Www.Somanuals.com. All Manuals Search And Download.  
LEDs status  
LED  
Description  
COL  
Blinking indicates there existing collision in powerline network.  
Blinking indicates there existing powerline network traffic  
Steady on indicates PL-103E has correctly receive power from  
power outlet  
ACT  
PWR  
LNK  
Steady on indicates the RJ-45 port has correctly connected to the  
network card of your PC or the Ethernet network  
1.1.4 System Requirements  
§Existing Ethernet/fast Ethernet network or an existing Ethernet/fast Ethernet network  
adapter and network cable  
§TCP/IP protocol  
§CD-ROM Drive (for installing Encryption Utility)  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
1.2 USB to Powerline Network Adapter PL-103U  
The newest and fastest way to network your PCs is through powerline networking,  
which allows you to turn the powerline in your home into your network cable. The  
easiest way to integrate any PC or laptop into such a powerline network is with  
PLANET Powerline USB Adapter. Use your existing USB port with your existing  
powerline. The Plug-and-Play USB Adapter connects directly to virtually any  
USB-ready PC just plug it in and you are ready to share data, printers, or  
high-speed Internet access over your existing powerline network. For desktop  
installation, you do not have to open your PC case. With user-friendly software, it is  
simple to set up.  
Not only is PL-103U easy to install and use, but it also powerful. You can send and  
receive data at speeds of up to 12Mbps. Plug it into the USB port; set it up, and you  
are ready to go. So for full desktop and notebook PC flexibility and powerline  
convenience, the PL-103U provides the perfect solution.  
1.2.1 Features  
¨
¨
¨
¨
¨
¨
¨
¨
¨
¨
¨
HomePlug Powerline Alliance Specification 1.0 compliant  
Power plug for powerline network  
Shares internet access across your entire home powerline network  
Provides powerline connectivity through Your USB port  
56-bit data encryption to ensure data security and reliability  
Easy to use Windows-based security key configuration utility  
Easy to read LED indicators  
Support CSMA/CA protocol on power line interface  
Plug-and-play operation provides easy setup  
Up to 14 Mbps data transfer rate  
Compatible with Windows 98SE, ME, 2000 and XP  
1.2.2 Package Contents  
Check the contents of your package for following parts:  
n One powerline USB adapter  
n One USB cable  
n One Manual and Utility CD-ROM  
n One Quick Installation Guide  
If any of these pieces are missing or damaged, please contact your dealer  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
immediately, if possible, retain the carton including the original packing material,  
and use them against to repack the product in case there is a need to return it to us  
for repair.  
1.2.3 Hardware Description  
PL-103U front panel  
LEDs status  
LED Description  
Steady on indicates PL-103U has detected other Powerline devices in  
LNK  
range.  
ACT Blinking indicates there existing powerline network traffic  
COL Blinking indicates there existing collision in powerline network.  
USB port  
The USB port is where you will connect your USB cable. To work with USB ports,  
your computer must be running Windows 98SE, ME, 2000 and XP.  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
1.2.4 System Requirements  
§Pentium-class 90 MHz or higher  
§Minimum 32 MB RAM  
§USB-ready PC  
§Windows 98SE, ME, 2000 and XP  
§CD-ROM Drive (for installing driver and Encryption Utility)  
1.3 Specification  
Product  
Model  
Powerline Ethernet Bridge Powerline USB Adapter  
PL-103E  
PL-103U  
HomePlug 1.0  
HomePlug 1.0  
USB 1.1  
Standards  
IEEE 802.3 10Base-T  
One Powerline Port  
One 10M Ethernet RJ-45  
port  
One Powerline port  
One USB type B jack  
Ports  
LAN: 10Mbps  
USB: 12Mbps  
Speed  
Powerline: 14Mbps (actual Powerline: 14Mbps (actual  
throughput is about 6Mbps)throughput is about 6Mbps)  
Powerline  
4.3MHz to 20.9MHz  
Frequency Band  
Encryption  
LEDs  
56-bit DES with Key configuration software  
COL, ACT, PWR, LNK  
108 x 76 x 43 mm  
250g  
COL, ACT, LNK  
92 x 57 x 42 mm  
85g  
Dimension  
Weighy  
Certifications  
Operating Temp.  
Storage Temp.  
FCC Class B, CE  
0 ~ 50 degree C  
-20 ~ 70 degree C  
Operating Humidity 10~90% non-condensing  
Storage Humidity  
5~95% non-condensing  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
Any system that provides Windows 98SE, 2000, Me and  
an Ethernet interface XP  
OS support  
Utility compatibility Windows 98SE, 2000, Me and XP  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
2. Planning your Powerline Network  
With PLANET Powerline products, a network can be created using home powerline.  
Computers can be networked over powerline using a USB Adapter or an Ethernet  
converter. Use PL-103U for a USB-enabled computer or use PL-103E for an  
Ethernet-enabled computer. The PL-103E is also ideal for any user who already has a  
router and wants to share high-speed Internet access across the powerline network.  
Connect PL-103E to the router after you have configured it using the Security  
Configuration Utility. Connect a straight-through UTP Category 5 cable to the uplink  
port of the router, or connect crossover UTP Category 5 cable to a LAN port on the  
router.  
All the powerline devices on the network must use the same password to  
communicate each other. This password can be configured through the Powerline  
Configuration utility that can be found in the CD-ROM. The default password of  
PLANET powerline devices is HomePlug. Thus, all the PLANET powerline devices  
can communicate each other without prior password configuration. Please refer to  
chapter 5 on detail of installing and using Powerline Configuration utility.  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
3. Powerline Ethernet Bridge Installation  
3.1 Hardware Installation  
1. Plug one end of an UTP category 5 cable into the computer, switch or hubs LAN  
port.  
2. Plug the other end of the network cable into the 10/100 RJ-45 Ethernet ports on  
PL-103E.  
3. Plug the PL-103E to the power outlet.  
NOTE: Because PL-103E sends data over the powerline of your house, it is best  
to plug it directly into a power outlet. Do not plug PL-103E into a UPS power strip  
with surge protection. PL-103E has its own power filter for protection against  
surges.  
4. Perform procedure 1~3 for all other PL-103E on your network.  
3.2 Driver Installation  
PL-103E does not need any driver to work if connected to a PC, since the PC should  
install an Ethernet Adapter and its driver already.  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
4. Powerline USB Adapter Installation  
4.1 Connecting USB to Powerline Network Adapter  
1. Plug the other end of the USB cable into the computers USB port.  
2. Plug the USB cable into the USB port on PL-103U.  
3. Plug the PL-103U directly into a power outlet.  
NOTE: Because PL-103E sends data over the powerline of your house, it is best  
to plug it directly into a power outlet. Do not plug PL-103E into a UPS power strip  
with surge protection. PL-103E has its own power filter for protection against  
surges.  
4.2 Powerline USB Adapter Driver Installation  
The installation procedure for the network driver will vary depending on which  
operating system you are using on your computer. PL-103U support Windows 98SE,  
Me, 2000 and XP. The following procedure is for installation under Windows XP.  
Installation on other operation system is similar.  
1. Windows will  
automatically detect the  
presence of the USB  
Adapter hardware in  
your computer once you  
have completed the  
hardware installation.  
Insert the bundled CD,  
select Install the  
software automatically  
(Recommended)and  
click the Next button.  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
2. Windows will start to  
search the CD to find the  
suitable driver.  
3. Windows may ask you to  
select the suitable driver  
to install. Please select  
usbeth.inffor Windows  
2000 and XP,  
usbeth98.inffor  
Windows 98SE and Me.  
Click Nextto continue.  
NOTE: Windows 2000 and  
XP will inform you that there  
is no digital signature found.  
Click the Yes button to  
continue the installation.  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4. Windows will tell you  
when it has finished  
installing the new driver.  
Click the Finish button.  
5. If Windows ask you to restart the system, please click the Yes button to restart  
your computer, or click the No button to restart later.  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5. Powerline Configuration Utility  
5.1 Install the Powerline Configuration Utility  
The installation procedure for the Powerline Configuration utility will vary depending  
on which operating system you are using on your computer. The following procedure  
is for installation under Windows XP. Installation on other operation system is similar.  
1. Insert the CD-ROM into the CD-ROM drive to initiate the autorun program. Once  
completed, a menu screen will appear.  
2. Click on the Powerline Configuration Utilityhyperlink in PL-103E or PL-103U  
field to start the installation. If the menu screen is not shown, you can start the  
installation as follows.  
Click on Start Menu/ Run.  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Enter E:\Utility\PL-103E\powerlineadapter.exein the appeared box, where  
Eis the letter of your CD-ROM drive.  
Click on OKbutton.  
3. The utility will be installed into your computer and a new icon called Powerline  
Configurationwill appear on your desktop.  
5.2 Using the Powerline Configuration Utility  
1. Double click the Powerline Configuration icon shown on your desktop.  
The Device tab shows the MAC address of your Powerline device  
connected to your computer. If you have installed more than two Powerline  
devices, select the preferred one and click Connect to access your  
network. Click Refresh whenever you add or eliminate Powerline devices.  
The Link Quality depends on the sites power circuit condition, power  
stability, etc.  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
2. The Network tab shows all Powerline devices present on your network.  
Click Scan Powerline Network to update Powerline network.  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3. The Security tab shows the default network password is HomePlug. Enter  
your own private network password if needed and click Set Local.  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4. The Advanced tab allows you to add other remote device password. You  
dont need this password unless other devices set different network  
password with yours. Each device password is different and listed on the  
bottom case label stuck on each Powerline Adapter. Enter the device  
password (The format is xxxx-xxxx-xxxx-xxxx) and click Add. Click Set All  
to activate the new-added password and the status column will be shown  
OK.  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5. Click OK to close the Utility program.  
5.3 Uninstalling the Powerline Configuration Utility  
1. Detach the Powerline Adapter from your computer.  
2. From your PC desktop, click Start -> Programs -> Powerline Adapter ->  
Uninstall.  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
6. Troubleshooting  
wWhy other Powerline Adapters arent listed on the network of my Configuration  
Utility?  
A: Make sure other devices are working properly and correctly installed. Please also  
check if every device uses the same network password. Try to set each device  
with the same network password or add other devices device password into your  
remote password list.  
wWhat types of security problems will I be encountering?  
A: If your house is on the same power grid as your neighbor, it is possible for a hacker  
to get in your network. However, this problem can be easily overcome by  
activating the encryption key of each Powerline device.  
wWill HomePlug operate on different circuit breakers?  
A: HomePlug can operate on different circuit breakers without affecting the  
performance. However, the signal will not pass through the power transformers  
outside your house.  
wWhat OS does the HomePlug utility software fully support?  
A: Windows 98SE, ME, 2000, and XP. Windows NT and Mac are only supported by  
the Ethernet Powerline Adapter as a Bridge.  
wHow does 56bit-DES compare with Wireless 802.11b 128bit-WEP encryption?  
A: 56bit-DES is superior because of its DES type encryption. Just because 802.11b  
uses 128bit-WEP with more bits doesn't mean the encryption is better. HomePlug  
devices use hardware 56bit-DES encryption. With hardware encryption the signal  
is almost impossible to crack. The hardware encryption process does not affect  
bandwidth, and the encryption is enabled at all times.  
wI cannot connect to other computers on my powerline network or to the Internet.  
A: Make sure the IP address and TCP/IP protocol are set up correctly for all the  
powerline networked computers.  
wDo the PL-103E/U device cause interference with other home networking or  
products?  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
A: No. PL-103E/U can co-exist with phoneline and wireless networking technologies.  
PL-103E/U operates in a different frequency band than powerline control and  
co-exists with technologies such as X-10, CEBus and LONworks.  
wHow do the PL-103E/U devices handle signal interference between two adjacent  
homes? How is eavesdropping prevented?  
A: PL-103E/U 56-bit DES security encryption to ensure network separation between  
homes. To enable 56-bit DES security encryption on PL-103E/U, you must run the  
security configuration utility on each and every PL-103E/U.  
wHow does PL-103E/U handle node address on the network?  
A: PL-103E/U adheres to standard Ethernet addressing protocols using destination  
and source MAC address.  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Philips Portable DVD Player PD9012 37 User Manual
Philips Stereo Amplifier TDA1552Q User Manual
Philips TV Cables SGP9101 User Manual
Pioneer Automobile Accessories CNSD 110FM User Manual
Planar Computer Monitor LC1502R User Manual
Plantronics Corded Headset MX500C User Manual
Polycom Network Card VIU 4350 User Manual
Porter Cable Biscuit Joiner 557 User Manual
Poulan Blower 115351127 User Manual
PSB Speakers Microwave Oven G5C 0018 User Manual