Pioneer Stereo System VSX D498 User Manual

AUDIO/VIDEO  
MULTI-CHANNEL RECEIVER  
VSX-D498  
Operating Instructions  
Download from Www.Somanuals.com. All Manuals Search And Download.  
IMPORTANTSAFETYINSTRUCTIONS  
READ INSTRUCTIONS — All the safety and operating  
GROUNDING OR POLARIZATION  
OBJECT AND LIQUID ENTRY — Never push objects of  
instructions should be read before the product is  
operated.  
Ifthisproductisequippedwithapolarizedalternating  
current line plug (a plug having one blade wider than  
theother), itwillfitintotheoutletonlyoneway. This  
isasafetyfeature.Ifyouareunabletoinserttheplug  
fullyintotheoutlet, tryreversingtheplug. Iftheplug  
should still fail to fit, contact your electrician to  
replace your obsolete outlet. Do not defeat the  
safety purpose of the polarized plug.  
any kind into this product through openings as they  
may touch dangerous voltage points or short-out  
parts that could result in a fire or electric shock.  
Never spill liquid of any kind on the product.  
RETAIN INSTRUCTIONS — The safety and operating  
instructionsshouldberetainedforfuturereference.  
HEED WARNINGS — All warnings on the product and  
in the operating instructions should be adhered to.  
FOLLOW INSTRUCTIONS — All operating and use  
instructions should be followed.  
SERVICING — Do not attempt to service this product  
yourself as opening or removing covers may expose  
you to dangerous voltage or other hazards. Refer all  
servicing to qualified service personnel.  
CLEANING — Unplug this product from the wall outlet  
beforecleaning.Theproductshouldbecleanedonly  
with a polishing cloth or a soft dry cloth. Never clean  
with furniture wax, benzine, insecticides or other  
volatile liquids since they may corrode the cabinet.  
If this product is equipped with  
a
three-wire  
DAMAGEREQUIRINGSERVICEUnplugthisproduct  
from the wall outlet and refer servicing to qualified  
service personnel under the following conditions:  
groundingtypeplug,aplughavingathird(grounding)  
pin, itwillonlyfitintoagroundingtypepoweroutlet.  
Thisisasafetyfeature.Ifyouareunabletoinsertthe  
plug into the outlet, contact your electrician to  
replace your obsolete outlet. Do not defeat the  
safety purpose of the grounding type plug.  
When the power-supply cord or plug is damaged.  
If liquid has been spilled, or objects have fallen into  
the product.  
ATTACHMENTS  
Do not use attachments not  
recommendedbytheproductmanufacturerasthey  
may cause hazards.  
WATER AND MOISTURE — Do not use this product  
near water — for example, near a bathtub, wash  
bowl,kitchensink,orlaundrytub;inawetbasement;  
or near a swimming pool; and the like.  
ACCESSORIES — Do not place this product on an  
unstable cart, stand, tripod, bracket, or table. The  
product may fall, causing serious injury to a child or  
adult, and serious damage to the product. Use only  
If the product has been exposed to rain or water.  
Iftheproductdoesnotoperatenormallybyfollowing  
theoperatinginstructions.Adjustonlythosecontrols  
that are covered by the operating instructions as an  
improper adjustment of other controls may result in  
damage and will often require extensive work by a  
qualified technician to restore the product to its  
normal operation.  
POWER-CORD PROTECTION — Power-supply cords  
should be routed so that they are not likely to be  
walked on or pinched by items placed upon or  
against them, paying particular attention to cords at  
plugs,conveniencereceptacles,andthepointwhere  
they exit from the product.  
OUTDOOR ANTENNA GROUNDING — If an outside  
antennaorcablesystemisconnectedtotheproduct,  
be sure the antenna or cable system is grounded so  
astoprovidesomeprotectionagainstvoltagesurges  
andbuilt-upstaticcharges.Article810oftheNational  
ElectricalCode,ANSI/NFPA70,providesinformation  
with regard to proper grounding of the mast and  
supporting structure, grounding of the lead-in wire  
to an antenna discharge unit, size of grounding  
conductors, location of antenna-discharge unit,  
connection to grounding electrodes, and  
requirementsforthegroundingelectrode.SeeFigure  
A.  
LIGHTNING — For added protection for this product  
duringalightningstorm,orwhenitisleftunattended  
and unused for long periods of time, unplug it from  
the wall outlet and disconnect the antenna or cable  
system. This will prevent damage to the product  
due to lightning and power-line surges.  
POWER LINES — An outside antenna system should  
notbelocatedinthevicinityofoverheadpowerlines  
or other electric light or power circuits, or where it  
can fall into such power lines or circuits. When  
installing an outside antenna system, extreme care  
should be taken to keep from touching such power  
lines or circuits as contact with them might be fatal.  
If the product has been dropped or damaged in any  
way.  
When the product exhibits a distinct change in  
performance — this indicates a need for service.  
with  
a
cart, stand, tripod, bracket, or table  
recommended by the manufacturer, or sold with  
the product. Any mounting of the product should  
follow the manufacturer’s instructions, and should  
use a mounting accessory recommended by the  
manufacturer.  
REPLACEMENT PARTS — When replacement parts  
arerequired,besuretheservicetechnicianhasused  
replacement parts specified by the manufacturer or  
have the same characteristics as the original part.  
Unauthorizedsubstitutionsmayresultinfire,electric  
shock, or other hazards.  
SAFETY CHECK — Upon completion of any service or  
repairs to this product, ask the service technician to  
performsafetycheckstodeterminethattheproduct  
is in proper operating condition.  
WALL OR CEILING MOUNTING — The product should  
not be mounted to a wall or ceiling.  
HEAT — The product should be situated away from heat  
sources such as radiators, heat registers, stoves, or  
other products (including amplifiers) that produce  
heat.  
CART — A product and cart combination should be  
moved with care. Quick stops, excessive force, and  
uneven surfaces may cause the product and cart  
combination to overturn.  
VENTILATION — Slots and openings in the cabinet are  
provided for ventilation and to ensure reliable  
operation of the product and to protect it from  
overheating, and these openings must not be  
blocked or covered. The openings should never be  
blocked by placing the product on a bed, sofa, rug,  
or other similar surface. This product should not be  
placed in a built-in installation such as a bookcase or  
rack unless proper ventilation is provided or the  
manufacturer’s instructions have been adhered to.  
POWER SOURCES — This product should be operated  
only from the type of power source indicated on the  
marking label. If you are not sure of the type of  
power supply to your home, consult your product  
dealer or local power company.  
OVERLOADING  
Do not overload wall outlets,  
extensioncords,orintegralconveniencereceptacles  
as this can result in a risk of fire or electric shock.  
ANTENNA  
LEAD IN  
WIRE  
GROUND  
CLAMP  
ANTENNA  
DISCHARGE UNIT  
(NEC SECTION 810-20)  
LOCATION – The appliance should be installed in a  
stable location.  
NONUSE PERIODS – The power cord of the appliance  
should be unplugged from the outlet when left  
unused for a long period of time.  
ELECTRIC  
SERVICE  
EQUIPMENT  
GROUNDING CONDUCTORS  
(NEC SECTION 810-21)  
GROUND CLAMPS  
POWER SERVICE GROUNDING  
ELECTRODE SYSTEM  
(NEC ART 250, PART H)  
Fig. A  
NEC — NATIONAL ELECTRICAL CODE  
Information to User  
Alteration or modifications carried out without appropriate authorization may invalidate the user's right to operate the equipment.  
3
<ARB7192>  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Features  
Dolby Digital and Dolby Pro Logic  
No need to worry about program formats! When playing Dolby Digital or Dolby Surround software in the  
(Dolby)  
Surround mode, decoding switches automatically according to the input signal. All you have to do is sit back and  
enjoy! (When connecting a DVD/LD player or LD player using the AC-3 RF output, a commercially available RF  
demodulator (RFD-1) is required.)  
Manufactured under license from Dolby Laboratories. “Dolby”, “AC-3”, “Pro Logic”, “ and double-D  
symbol are trademarks of Dolby Laboratories. Confidential Unpublished Works. © 1992 - 1997 Dolby  
Laboratories, Inc. All rights reserved.  
Various Surround Effects (DSP)  
The DSP (Digital Signal Processing) surround mode allows you to transform your living room into six different  
sonic environments when listening to music or watching movies.  
Midnight Listening Mode  
When late night hours or other factors require that the volume be kept low, the surround effects may tend to  
become less than satisfactory. When the midnight listening mode is on, you can enjoy the effects of quality  
surround sound even at low volumes.  
5.1 Channel Input  
By connecting components equipped with 5.1 channel output to the DVD 5.1 channel input on this unit, you can  
enjoy 5.1 channel surround sound. Connections can be made to a DVD player, Multi channel decoder equipped  
with 5.1 channel analog output jacks.  
5 Channels of Independent Amplification  
This receiver incorporates 5 independent 80 watt power amplifiers which enable high quality playback of Dolby  
Digital surround sound. This construction provides improved linearity and accurate reproduction of each channel  
for true high fidelity reproduction from even the most demanding Dolby Digital program sources.  
Energy-saving Design  
This unit is designed to use minimal electricity when power is switched OFF (during Standby). Regarding the value  
of the power consumption in standby mode, refer to “Specifications” on page 46.  
4
<ARB7192>  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Table of Contents  
Introductory Information............................................................ 6  
Checking the Supplied Accessories.......................................................... 6  
How to Use This Manual ........................................................................... 6  
Power Connection (AC OUTLET) .............................................................. 6  
Preparing the Remote Control .................................................................. 6  
Receiver Installation................................................................................... 7  
When Making Cable Connections............................................................. 7  
Connections................................................................................. 8  
Antennas ..................................................................................................... 8  
Audio Components Connections .............................................................. 9  
Video Components Connections ............................................................ 10  
Digital Connections .................................................................................. 11  
DVD 5.1 Channel Connection .................................................................. 12  
Speakers ................................................................................................... 13  
Preparations .............................................................................. 15  
Setting Up for Surround Sound.............................................................. 15  
Names of Parts and Basic Operations..................................... 21  
Display ...................................................................................................... 21  
Remote Control ........................................................................................ 22  
Front Panel................................................................................................ 23  
Sound Modes ............................................................................ 25  
Switching ANALOG/DIGITAL Signal Input ............................................. 26  
Playback .................................................................................................... 27  
Playing Sources with Dolby Digital Sound ............................................ 28  
Selecting a Sound Mode ......................................................................... 29  
DVD 5.1ch input playback........................................................................ 30  
Listening in MIDNIGHT Listening Mode ................................................ 30  
Ajusting Bass and Treble Frequencies (Tone Control) .......................... 31  
Tuner Operations....................................................................... 32  
Automatic and Manual Tuning................................................................ 32  
Direct Tuning ............................................................................................ 33  
Memorizing Frequently Tuned Stations ................................................. 34  
Recalling the Memorized Stations .......................................................... 35  
Other Operations ...................................................................... 36  
Recording from Audio Components ...................................................... 36  
Recording from Video Components ....................................................... 37  
Remote Controlling Other PIONEER Components ................................ 38  
Additional Information ............................................................. 43  
Dolby Digital ............................................................................................. 43  
Troubleshooting ....................................................................................... 44  
Specifications ........................................................................................... 46  
5
<ARB7192>  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Introductory Information  
Checking the Supplied Accessories  
Please check that you have received all of the following accessories with the receiver.  
FM wire antenna  
AM loop antenna  
Remote control unit  
“AA” IEC R6P batteries x 2  
How to Use This Manual  
This manual is divided into two main sections :  
The following marks and symbols are used throughout  
this manual:  
SET UP  
This section explains how to make the necessary  
connections from the receiver to your other audio and  
video components. Receiver operations described later  
in this section under the heading “Preparations” enable  
you to set up and customize your home entertainment  
center.  
Provides additional information, precautions,  
memo  
and advice.  
Indicates a blinking button, indicator, or  
display.  
OPERATION  
This section provides complete information about  
operation of the receiver and supplied remote control.  
Indicates a steadily lit button, indicator, or  
display.  
Power connection (AC OUTLET)  
[SWITCHED 100 W (0.8 A) MAX]  
Switching this receiver on or putting it in standby also switches components connected to the receiver’s AC OUTLET  
jacks on and off. When connecting components to the AC OUTLET jacks, leave the power switch of the connected  
components in the ON position. Total power consumption of connected components should not exceed 100W (0.8 A).  
CAUTION!  
To avoid malfunction, overheating, and possible fire risk, do not connect high-wattage appliances such as blow  
dryers and irons to the AC OUTLET jacks.  
• Do not connect a monitor or TV set.  
Even if the power consumption of the TV or monitor is within the acceptable limits, when monitors or TV sets are  
switched on, they consume a large amount of power and may exceed the capacity of this receiver.  
Preparing the Remote Control  
Loading the batteries  
AA dry cell batteries ((“AA” IEC R6P)×2)  
CAUTION!  
Incorrect use of batteries may result in such hazards  
as leakage and bursting. Observe the following  
precautions.  
\
• Never use new and old batteries together.  
• Insert the plus and minus sides of the batteries  
properly according to the marks in the battery case.  
When you notice a decrease in the operating range of  
• Batteries with the same shape may have different  
the remote control, replace all batteries with new ones.  
voltages. Do not use different batteries together.  
6
<ARB7192>  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Introductory Information  
Operating range of remote control unit  
Operating other PIONEER components  
Connecting an optional control cord allows you to  
operate other PIONEER components simply by pointing  
the receiver’s remote control at the remote sensor on the  
front panel of the receiver. The receiver then sends the  
remote control signals to the other devices via the  
CONTROL OUT terminal.  
Point the remote control toward the remote sensor Î on  
the front panel of this unit to operate. The remote control  
unit will operate the receiver for up to a distance of 23  
feet (7 m) within 30° angle on each side of the sensor of  
the remote sensor as illustrated below.  
CONTROL  
OUT  
IN  
CONTROL  
IN  
OUT  
Receiver  
30  
30  
PIONEER component  
bearing the Î mark.  
23 feet(7m)  
To CONTROL IN  
terminal of another  
PIONEER component  
bearing the Î mark.  
Remote control may not function properly if :  
• There are obstacles between the remote  
control and the remote sensor.  
memo  
Remote Control  
• Direct sunlight or fluorescent light is shining  
onto the remote sensor.  
• The receiver is located near a device  
emitting infrared rays.  
• Operated simultaneously with another  
remote control which uses infrared rays.  
You can also control PIONEER components  
(and those made by other manufacturers) by  
pointing the receiver’s remote control directly  
at the respective component. This type of  
operation does not require control cords.  
memo  
Receiver Installation  
• Do not place objects directly on top of this unit. It will prevent proper heat dispersal.  
• When installing in a rack, etc., be sure to leave more than 8 inches of space above the receiver.  
It is recommended that you place the  
memo  
receiver to the left of your cassette and/  
or video decks. This will prevent noise  
caused by leakage flux from the  
Leave more than 8 inches (20 cm)  
transformer in the receiver. If you  
experience noise during playback of  
your cassette and/or video decks, move  
them farther away from the receiver.  
Receiver  
When Making Cable Connections  
Be careful not to arrange cables in a manner that bends  
the cables over the top of this unit as shown in the  
illustration. If the cables are brought over this unit, the  
magnetic field produced by the transformers in this unit  
may cause a humming noise to come from the speakers.  
7
<ARB7192>  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connections  
Antennas  
FM wire antenna  
Connect the FM wire antenna and fully extend (for best reception, attach horizontally along  
a window frame, etc.).  
AM loop antenna  
(See below)  
ANTENNA  
R
R
L
L
A
B
DIGITAL  
IN  
PCM/  
A
B
FM  
UNBAL  
75Ω  
AM  
LOOP  
ANTENNA  
OPT  
1
SPEAKER IMPEDANCE  
CAUTION:  
DVD 5.1 CH  
INPUT  
6OR 8~ 16/ SPEAKER  
TO  
MONITOR  
TV  
OPT  
2
ATTENTION: IMPEDANCE DE HAUT-PARLEURS  
SURROUND  
L
6OU 8~ 16/ HAUT-PARLEUR  
SUBWOOFER  
FRONT SPEAKERS  
CONTROL  
OUT IN  
VIDEO  
OUT  
R
L
IN  
IN  
IN  
IN  
IN  
IN  
OUT  
OUT  
VIDEO  
PCM/  
COAX  
CENTER  
PREOUT  
R
IN  
CENTER  
OUT  
IN  
IN  
OUT  
ATTENTION:  
SE REPOTER AU  
MODE D'EMPLON  
CAUTION:  
SEE INSTRUCTION  
MANUAL  
SUB  
WOOFER  
PREOUT  
L
L
R
L
8~16/ SPEAKER  
8~16/ HAUT-  
PARLEUR  
CENTER  
SURROUND  
SPEAKERS  
R
R
SPEAKER  
TV/  
SAT  
DVD/  
LD  
DVD 5.1 CH  
FRONT  
PLAY  
REC  
PLAY  
REC  
VCR  
MD/TAPE 1  
CD  
TAPE 2 MONITOR  
6
6
~
~
LESS THAN 8/SPEAKER  
MOINS DE 8/HAUT-PARLEUR  
IMPEDANCE SELECTOR  
7 AM loop antenna  
1 Assemble the antenna.  
2 Twist exposed wire strands  
together and insert into AM  
antenna terminals.  
3 Attach to a wall, etc. (if desired)  
and face toward the direction  
providing the best reception.  
3/8 in.(10mm)  
Using external antennas  
7 To improve AM reception  
7 To improve FM reception  
Connect a 15 to 18 feet (5~6 m) length of vinyl-coated wire to the AM  
antenna terminal in addition to the supplied AM loop antenna.  
Connect an external FM antenna.  
For the best possible reception, suspend horizontally outdoors.  
Outdoor antenna  
75 coaxial cable  
Indoor antenna  
(Vinyl-coated wire)  
15~18 feet (5~6 m)  
H
GND  
FM  
UNBAL  
75Ω  
AM  
LOOP  
ANTENNA  
FM  
UNBAL  
75Ω  
AM  
LOOP  
ANTENNA  
H
GND  
8
<ARB7192>  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connections  
Audio Components Connections  
Be sure to switch power to standby and remove the power cord from the wall outlet when you make or change  
connections.  
Connect your audio components as shown below. Refer to “Digital Connections” on page 11 when making digital  
connections from your DVD or LD player.  
ANTENNA  
R
R
L
L
A
B
DIGITAL  
IN  
PCM/  
A
B
FM  
UNBAL  
75Ω  
AM  
LOOP  
ANTENNA  
OPT  
1
SPEAKER IMPEDANCE  
CAUTION:  
DVD 5.1 CH  
INPUT  
6OR 8~ 16/ SPEAKER  
TO  
MONITOR  
TV  
OPT  
2
ATTENTION: IMPEDANCE DE HAUT-PARLEURS  
SURROUND  
L
6OU 8~ 16/ HAUT-PARLEUR  
SUBWOOFER  
FRONT SPEAKERS  
CONTROL  
OUT IN  
VIDEO  
OUT  
R
L
IN  
IN  
IN  
IN  
IN  
IN  
OUT  
OUT  
VIDEO  
PCM/  
COAX  
CENTER  
PREOUT  
R
IN  
CENTER  
OUT  
IN  
IN  
OUT  
ATTENTION:  
SE REPOTER AU  
MODE D'EMPLON  
CAUTION:  
SEE INSTRUCTION  
MANUAL  
SUB  
WOOFER  
PREOUT  
L
L
R
L
8~16/ SPEAKER  
8~16/ HAUT-  
PARLEUR  
CENTER  
SURROUND  
SPEAKERS  
R
R
SPEAKER  
TV/  
SAT  
DVD/  
LD  
DVD 5.1 CH  
FRONT  
PLAY  
REC  
PLAY  
REC  
VCR  
MD/TAPE 1  
CD  
TAPE 2 MONITOR  
6
6
~
~
LESS THAN 8/SPEAKER  
MOINS DE 8/HAUT-PARLEUR  
IMPEDANCE SELECTOR  
»
«
«
»
PLAY  
REC  
PLAY  
REC  
»
OUTPUT  
L
L
L
L
L
R
R
R
R
R
MD recorder  
or Cassette deck  
Cassette deck  
CD player  
*The arrows indicate the direction of the audio signal.  
7 Audio cords  
Use audio cords (not supplied) to connect the audio  
components.  
Cassette deck placement  
Depending on where the cassette deck is placed, noise  
may occur during playback of your cassette deck which  
is caused by leakage flux from the transformer in the  
receiver. If you experience noise, move the cassette deck  
farther away from the receiver.  
L
Connect red plugs to R (right)  
and white plugs to L (left).  
Be sure to insert completely.  
R
9
<ARB7192>  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connections  
Video Components Connections  
• Connect your video components as shown below. Also, refer to “Digital Connections” on page 11 when making  
digital connections from your DVD or LD player.  
Video deck  
TV  
monitor  
OUTPUT  
V
INPUT  
V
L
L
INPUT  
VIDEO  
R
R
«
»
»
ANTENNA  
R
R
L
L
A
B
DIGITAL  
IN  
PCM/  
A
B
FM  
UNBAL  
75Ω  
AM  
LOOP  
ANTENNA  
OPT  
1
SPEAKER IMPEDANCE  
CAUTION:  
DVD 5.1 CH  
INPUT  
6OR 8~ 16/ SPEAKER  
TO  
MONITOR  
TV  
OPT  
2
ATTENTION: IMPEDANCE DE HAUT-PARLEURS  
SURROUND  
L
6OU 8~ 16/ HAUT-PARLEUR  
SUBWOOFER  
FRONT SPEAKERS  
CONTROL  
OUT IN  
VIDEO  
OUT  
R
L
IN  
IN  
IN  
IN  
IN  
IN  
OUT  
OUT  
VIDEO  
PCM/  
COAX  
CENTER  
PREOUT  
R
IN  
CENTER  
OUT  
IN  
IN  
OUT  
ATTENTION:  
SE REPOTER AU  
MODE D'EMPLON  
CAUTION:  
SEE INSTRUCTION  
MANUAL  
SUB  
WOOFER  
PREOUT  
L
L
R
L
8~16/ SPEAKER  
8~16/ HAUT-  
PARLEUR  
CENTER  
SURROUND  
SPEAKERS  
R
R
SPEAKER  
TV/  
SAT  
DVD/  
LD  
DVD 5.1 CH  
FRONT  
PLAY  
REC  
PLAY  
REC  
VCR  
MD/TAPE 1  
CD  
TAPE 2 MONITOR  
6
6
~
~
LESS THAN 8/SPEAKER  
MOINS DE 8/HAUT-PARLEUR  
IMPEDANCE SELECTOR  
»
»
OUTPUT  
V
OUTPUT  
7 Front  
VIDEO VIDEO  
INPUT  
L
AUDIO  
R
V
L
L
Video camera  
(etc.)  
R
R
VIDEO INPUT  
L
R
TV tuner  
DVD player  
(or satellite tuner)  
(or LD player)  
7 Audio/Video cords  
Use audio/video cords (not supplied) to connect the  
video components and a video cord to connect the TV  
or monitor.  
VIDEO  
Connect red plugs to R (right),  
white plugs to L (left), and the  
yellow plugs to VIDEO.  
L
Be sure to insert completely.  
R
10  
<ARB7192>  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connections  
Digital Connections  
Digital components can be connected as shown below. You can select up to three of the following be assigned to the  
digital inputs on this unit: DVD/LD, TV/SAT, MD/TAPE1, CD, VCR. To assign the digital inputs, refer to “Setting Up for  
Surround Sound” on page 15, 19)  
ANTENNA  
R
R
L
L
A
B
DIGITAL  
IN  
PCM/  
A
B
FM  
UNBAL  
75Ω  
AM  
LOOP  
ANTENNA  
OPT  
1
SPEAKER IMPEDANCE  
CAUTION:  
DVD 5.1 CH  
INPUT  
6OR 8~ 16/ SPEAKER  
TO  
MONITOR  
TV  
OPT  
2
ATTENTION: IMPEDANCE DE HAUT-PARLEURS  
SURROUND  
L
6OU 8~ 16/ HAUT-PARLEUR  
SUBWOOFER  
FRONT SPEAKERS  
CONTROL  
OUT IN  
VIDEO  
OUT  
R
L
IN  
IN  
IN  
IN  
IN  
IN  
OUT  
OUT  
VIDEO  
PCM/  
COAX  
CENTER  
PREOUT  
R
IN  
CENTER  
OUT  
IN  
IN  
OUT  
ATTENTION:  
SE REPOTER AU  
MODE D'EMPLON  
CAUTION:  
SEE INSTRUCTION  
MANUAL  
SUB  
WOOFER  
PREOUT  
L
L
R
L
8~16/ SPEAKER  
8~16/ HAUT-  
PARLEUR  
CENTER  
SURROUND  
SPEAKERS  
R
R
SPEAKER  
TV/  
SAT  
DVD/  
LD  
DVD 5.1 CH  
FRONT  
PLAY  
REC  
PLAY  
REC  
VCR  
MD/TAPE 1  
CD  
TAPE 2 MONITOR  
6
6
~
~
LESS THAN 8/SPEAKER  
MOINS DE 8/HAUT-PARLEUR  
IMPEDANCE SELECTOR  
»
»
»
DIGITAL  
OUT  
COAX  
OUT  
DIGITAL  
OUT  
MD recorder  
CD player  
DVD player  
memo  
7 Digital audio cords/Fiber-optic cables  
When playing LD recorded in Dolby Digital  
Commercially available digital audio coaxial cord  
(standard video cords can also be used) or fiber-optic  
cables (not supplied) are used to connect digital  
components to this receiver.  
When connecting a DVD/LD player or LD player using  
the AC-3 RF output, a commercially available RF  
demodulator (RFD-1) is required. The RF demodulator  
changes the RF signal to a digital signal which is then  
processed by the receiver through the digital input  
jacks. For more details, refer to the instruction manual  
supplied with the RFD-1.  
When you use optical digital input or output terminals,  
pull off the caps and insert the plugs. Be sure to insert  
completely.  
The factory setting for each of the digital inputs is  
Digital audio cord  
Fiber-optic cables  
described below.  
COAX : DVD  
OPT 1 : CD  
(or standard video cord)  
OPT 2 : MD  
11  
<ARB7192>  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connections  
DVD 5.1 Channel Connection  
DVD and LD discs are often compatible with both 2 channel and 5.1 channel audio output formats. Refer to page 30 for  
more information on how to switch between the two input methods.  
Connections can be made from a DVD player, Multi channel decoder equipped with 5.1 analog outputs to the 5.1 analog  
inputs on this unit.  
ANTENNA  
R
R
L
L
A
B
DIGITAL  
IN  
PCM/  
A
B
FM  
UNBAL  
75Ω  
AM  
LOOP  
ANTENNA  
OPT  
1
SPEAKER IMPEDANCE  
CAUTION:  
DVD 5.1 CH  
INPUT  
6OR 8~ 16/ SPEAKER  
TO  
MONITOR  
TV  
OPT  
2
ATTENTION: IMPEDANCE DE HAUT-PARLEURS  
SURROUND  
L
6OU 8~ 16/ HAUT-PARLEUR  
SUBWOOFER  
FRONT SPEAKERS  
CONTROL  
OUT IN  
VIDEO  
OUT  
R
L
IN  
IN  
IN  
IN  
IN  
IN  
OUT  
OUT  
VIDEO  
PCM/  
COAX  
CENTER  
PREOUT  
R
IN  
CENTER  
OUT  
IN  
IN  
OUT  
ATTENTION:  
SE REPOTER AU  
MODE D'EMPLON  
CAUTION:  
SEE INSTRUCTION  
MANUAL  
SUB  
WOOFER  
PREOUT  
L
L
R
L
8~16/ SPEAKER  
8~16/ HAUT-  
PARLEUR  
CENTER  
SURROUND  
SPEAKERS  
R
R
SPEAKER  
TV/  
SAT  
DVD/  
LD  
DVD 5.1 CH  
FRONT  
PLAY  
REC  
PLAY  
REC  
VCR  
MD/TAPE 1  
CD  
TAPE 2 MONITOR  
6
6
~
~
LESS THAN 8/SPEAKER  
MOINS DE 8/HAUT-PARLEUR  
IMPEDANCE SELECTOR  
»
»
»
»
»
SURROUND  
OUTPUT  
FRONT  
OUTPUT  
VIDEO  
OUT  
SUB  
WOOFER  
CENTER  
L
L
R
R
Components equipped  
with 5.1 channel  
analogue output jacks  
memo  
The 5.1 channel input can only be used when DVD/LD is selected.  
12  
<ARB7192>  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connections  
Speakers  
• Use speakers with a nominal impedance of 6 to 16 .  
• The front speaker B terminal is only used in stereo mode (Not available during DVD 5.1 channel, DSP mode,  
Surround mode).  
(Dolby)  
• When you use the speaker on your TV as a center speaker, please connect the CENTER PREOUT jack on this unit to  
the audio input jack on your TV. In this case, the center speaker shown below is unnecessary. Refer to the instruction  
manual supplied with the TV or monitor you are connecting to for more information.  
You can set the configuration of your speaker system, whether the sizes of the speakers are large or small, and  
whether or not you have a sub woofer connected. (Refer to pages 15 to 17)  
• No sound is output from the front speakers if both A and B speaker systems are selected, but only one pair of  
speakers is connected to the FRONT SPEAKERS terminals. To select the speaker system, refer to page 23.  
TV  
Front Speakers  
Center Speaker  
C
Surround Speakers  
SR  
(To be used as the  
center speaker)  
R
L
SL  
(To the audio input)  
Use speakers with  
nominal impedance of 6 Ω  
to 8 or 8 to 16 .  
ANTENNA  
R
R
L
L
• When using speakers  
with impedance of at  
least 6 but less than 8  
, set the IMPEDANCE  
SELECTOR to the  
“6~LESS THAN 8 ”  
position.  
• When using 8 to 16 ,  
set the IMPEDANCE  
SELECTOR to “8~16 ”  
position.  
A
B
DIGITAL  
IN  
PCM/  
A
B
FM  
UNBAL  
75Ω  
AM  
LOOP  
ANTENNA  
OPT  
1
SPEAKER IMPEDANCE  
SPEAKER  
CAUTION:  
DVD 5.1 CH  
INPUT  
6OR 8~ 16Ω  
ATTENTION: IMPEDANCE DE HAUT-PARLEURS  
6OU 8~ 16HAUT-PARLEUR  
/
TO  
MONITOR  
TV  
OPT  
2
SURROUND  
/
L
SUBWOOFER  
FRONT SPEAKERS  
CONTROL  
OUT IN  
VIDEO  
OUT  
R
L
IN  
IN  
IN  
IN  
IN  
IN  
OUT  
VIDEO  
PCM/  
COAX  
CENTER  
PREOUT  
R
IN  
CENTER  
OUT  
IN  
IN  
OUT  
OUT  
CAUTION:  
ATTENTION:  
SEE INSTRUCTION SE REPOTER AU  
MANUAL  
MODE D'EMPLON  
SUB  
WOOFER  
PREOUT  
L
L
R
L
8~16Ω  
/
/
SPEAKER  
HAUT-  
PARLEUR  
8~16Ω  
CENTER  
SURROUND  
SPEAKERS  
R
R
SPEAKER  
TV/  
SAT  
DVD/  
PLAY  
REC  
PLAY  
REC  
LD  
VCR  
MD/TAPE  
1
CD  
TAPE  
2
MONITOR  
DVD 5.1 CH  
6
6
~
~
LESS THAN 8/SPEAKER  
MOINS DE 8/HAUT-PARLEUR  
IMPEDANCE SELECTOR  
FRONT  
Sub Woofer  
INPUT  
Be sure to complete all other  
connections before connecting  
this unit to the AC power source.  
Amplified Sub Woofer  
Connection methods that differ from the example  
shown in this manual may be available. For more  
details, refer to the instruction manual supplied with  
the sub woofer.  
7 Speaker terminals  
Push tab to the open position, and  
insert the wire. Then, close tab  
firmly to secure the wire in place.  
Twist exposed wire  
strands together.  
3/8 in.(10mm)  
13  
<ARB7192>  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connections  
Speaker placement  
To achieve the best possible surround sound, install your speakers as shown below. Be sure all speakers are installed  
securely to prevent accidents and improve sound quality.  
Sub Woofer  
Front  
Left  
Front  
Right  
Center  
Surround  
Left  
Surround  
Right  
Listening  
Position  
• Install the left and right front speakers at equal distances from the TV.  
memo  
• When installing speakers near the TV, we recommend using magnetically shielded speakers to prevent  
possible interference such as distortion in the color of the TV screen. If you do not have magnetically  
shielded speakers and notice discoloration of the TV screen, place the speakers farther away from the TV.  
• Install the center speaker above, below the TV so that the sound of the center channel is localized at the TV  
screen.  
CAUTION:  
When installing the center speaker on top of the TV, be sure to secure it with tape or some other suitable  
means.  
Otherwise, the speaker may fall from the TV due to external shocks such as earthquakes, and it may lead to  
endangering those nearby or damaging the speaker.  
• If possible, install the surround speakers slightly above ear level.  
• It may be difficult to obtain a cohesive surround effect if the surround speakers are installed farther away  
from the listening position than the front and center speakers.  
14  
<ARB7192>  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Preparations  
Setting Up for Surround Sound  
Be sure to switch the power of this unit on (The STANDBY indicator goes out) before operating.  
To ensure the best possible surround sound, be sure to complete the following set up operations. This is particularly  
important when using the  
(Dolby) Surround mode. You only need to make these settings once (unless you change  
the placement of your current speaker system or add new speakers, etc.). Refer to the following pages for detailed  
descriptions of the settings available for each mode.  
1 Press RECEIVER STANDBY/ON to turn the power on.  
The STANDBY indicator goes out.  
SOURCE  
SELECT  
2 Press SURROUND.  
CHANNEL  
CD  
TAPE  
TUNER  
DVD  
LD  
STANDBY/ON  
STATION  
This switches the remote to the surround setup mode.  
TV FUNC.  
BAND  
TV VOL.  
FREQ.  
DIRECT  
MPX  
CLASS  
.ACCESS  
3
4
3 Press @ or # to select the mode you desire.  
1
4
2
5
8
3
6
9
For best results, start with “SPEAKER setting mode” and make your  
initial adjustments in the order described below.  
TV  
TEST TONE  
CONTROL  
7
ATT.  
0
SURROUND  
FUNCTION  
CD DISC  
The current settings are displayed automatically.  
2
1
DSP MODE MUTING  
SPEAKER (Front, Center, Surround) setting mode (page 16)  
Use to specify the type of speakers you have connected.  
SUB WOOFER ON/OFF setting mode (page 17)  
Use to specify the sub woofer as on or off.  
CHANNEL  
SELECT  
LEVEL  
RECEIVER  
STANDBY/ON  
MASTER  
VOLUME  
EFFECT  
AV MULTI-CHANNEL RECEIVER  
REMOTE CONTROL UNIT  
Î
Crossover frequency setting mode (page 17)  
Use to determine which frequencies will be sent to the sub woofer or  
“Large” speakers.  
LFE attenuator setting mode (page 17)  
Use to specify the peak level for the LFE channel and the crossover  
network for rerouted bass frequencies.  
Low cut filter ON/OFF setting mode (page 18)  
Use to cut the distorted sound from the sub woofer.  
FRONT speaker distance setting mode (page 18)  
Use to specify the distance from your listening position to your front speaker.  
CENTER speaker distance setting mode (page 18)  
memo  
Use to specify the distance from your listening position to your center speaker.  
SURROUND speaker distance time setting mode (page 18)  
Use to specify the distance from your listening position to your surround speakers.  
Dynamic range control setting mode (page 19)  
• The setting mode is automatically exited  
if no operation is performed for 20  
seconds.  
Use to compress the dynamic range of the sound track.  
Coaxial digital input setting (page 19)  
Use to specify the input to be assigned to the coaxial digital input.  
Optical digital input 1 setting (page 19)  
Use to specify the input to be assigned to the optical digital input 1.  
Optical digital input 2 setting (page 19)  
Use to specify the input to be assigned to the optical digital input 2.  
4 Press % or to select the setting you desire.  
The setting is entered automatically.  
5 Repeat steps 3 and 4 to set other surround modes.  
15  
<ARB7192>  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Preparations  
SPEAKER setting mode  
Establishes the size and configuration of the speaker system you have connected.  
In the display, “F”, “C”, and “S” refer to front, center, and surround speakers respectively. Speaker size is denoted as  
“L” for large speakers, “S” for small speakers, and “ ” (asterisk) if no speaker is connected.  
memo  
If the cone size of your speaker is larger than 5 inches (12 cm), please set to Large.  
1 Press % or to set the front speaker.  
Front speaker (initial setting is “L (Large)”)  
• Select “FL” if your speakers will reproduce bass frequencies effectively or  
if you did not connect a sub woofer.  
• Select “FS” to send bass frequencies to the sub woofer. (The center and  
surround speakers cannot be set to Large if the front speakers are set to  
Small. In this case, all bass frequencies are sent to the sub woofer.)  
SOURCE  
SELECT  
CHANNEL  
CD  
TAPE  
TUNER  
DVD  
LD  
STANDBY/ON  
STATION  
TV FUNC.  
BAND  
TV VOL.  
FREQ.  
DIRECT  
MPX  
CLASS  
.ACCESS  
@,#  
1
4
2
5
8
3
6
9
%,fi  
TV  
TEST TONE  
CONTROL  
7
2 Press % or to set the center speaker.  
ATT.  
0
SURROUND  
FUNCTION  
CD DISC  
DSP MODE MUTING  
Center speaker (initial setting is “L (Large)”)  
CHANNEL  
SELECT  
LEVEL  
• Select “CL” if your speaker will reproduce bass frequencies effectively.  
• Select “CS” to send bass frequencies to the other speakers or sub woofer.  
RECEIVER  
STANDBY/ON  
MASTER  
VOLUME  
EFFECT  
• Select “C ” if you did not connect a center speaker. In this case, the  
AV MULTI-CHANNEL RECEIVER  
REMOTE CONTROL UNIT  
Î
center channel is output from the front speakers.  
3 Press % or to set the surround speaker.  
Surround speaker (initial setting is “L (Large)”)  
• Select “SL” if your speakers will reproduce bass frequencies effectively.  
• Select “SS” to send bass frequencies to the other speakers or sub woofer.  
SP  
A
SIGNAL  
SELECT  
ANALOG  
• Select “S ” if you did not connect surround speakers. In this case, the  
sound of the surround channels is output from the front and center  
speakers.  
dB  
SP  
A
SIGNAL  
SELECT  
ANALOG  
dB  
SP  
A
SIGNAL  
SELECT  
ANALOG  
dB  
* Press # to advance to the next  
setting, and press @ to return  
to previous setting.  
16  
<ARB7192>  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Preparations  
SUB WOOFER ON/OFF setting mode  
Sets whether the SUB WOOFER is used or not.  
• Initial setting is “ON”.  
memo  
• Setting the front speaker size to “Small” in the SPEAKER setting mode automatically locks the sub woofer  
in the “ON” position.  
SP  
A
SIGNAL  
SELECT  
ANALOG  
Press % or to select sub woofer ON or OFF.  
dB  
Crossover frequency setting mode  
Setting speakers to “Small” in “SPEAKER setting mode” sends the respective channels’ bass frequencies to the sub  
woofer (or “Large” speakers). This function lets you determine which frequencies will be sent to the sub woofer or  
“Large” speakers.  
• Initial setting is “100 Hz”.  
memo  
• If all speakers (front, center, and surround) are set to “Large” in SPEAKER setting mode, crossover  
frequency cannot be set. (  
appears in the display  
.)  
∗∗∗  
SP  
A
SIGNAL  
SELECT  
ANALOG  
Press % or to specify the crossover frequency for your small  
speakers (100 Hz, 150 Hz or 200 Hz).  
dB  
100 Hz  
Sends bass frequencies below 100 Hz to the sub woofer (or Large  
speakers).  
150 Hz  
Sends bass frequencies below 150 Hz to the sub woofer (or Large  
speakers).  
200 Hz  
Sends bass frequencies below 200 Hz to the sub woofer (or Large  
speakers). We recommend setting 200 Hz when only small speakers  
are used.  
LFE attenuator setting mode  
Dolby Digital audio sources include ultra-low bass tones. Set the LFE attenuator as needed to prevent the ultra-low  
bass tones from distorting the sound from the speakers.  
• Initial setting is “0 dB”.  
memo  
• When is selected (  
appears in the display), LFE is not available.  
∗∗  
SP  
A
SIGNAL  
SELECT  
ANALOG  
Press % or to set the attenuation level (0 dB, 10 dB  
dB  
or  
dB ()).  
∗∗  
17  
<ARB7192>  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Preparations  
Low cut filter ON/OFF setting mode  
Turn the low cut filter ON when distorted sound is output through the sub woofer.  
• Initial setting is “OFF”.  
memo  
• If the SUB WOOFER is set to “OFF” in the SUB WOOFER ON/OFF setting mode, the low cut filter cannot be  
set.  
SP  
A
SIGNAL  
SELECT  
ANALOG  
Press % or to select low cut filter ON or OFF.  
dB  
FRONT speaker distance setting mode  
Sets the distance from the FRONT speaker to the listening position.  
• Initial setting is 10 feet.  
• One step equals about 1 foot (30 cm).  
memo  
SP  
A
SIGNAL  
SELECT  
ANALOG  
Press % or to set the distance of the FRONT speaker from  
the main listening position (up to 30 steps).  
dB  
CENTER speaker distance setting mode  
Normally as the Center speaker is placed directly in front in the listening room, it is closer to the listening position than  
the Front speakers. This means that the sound from the Center speaker will be heard before the Front speakers. To  
prevent this, set the Center speaker distance setting to delay the sound from the Center speaker so that the sound from  
the Front and Center speakers will be heard at the same time.  
• Initial setting is 10 feet.  
memo  
• When “C ” is selected in SPEAKER setting mode, the Center distance cannot be set.  
• One step equals about 1 foot (30 cm).  
SP  
A
SIGNAL  
SELECT  
ANALOG  
Press % or to set the distance of the CENTER speaker from  
the main listening position (up to 30 steps).  
dB  
SURROUND speaker distance setting mode  
Use to set the SURROUND speaker distance. Like the CENTER speaker position, the SURROUND speakers may be set  
in a location closer or farther than the FRONT speakers. Set the distance of the SURROUND speakers accurately to hear  
sounds coming from both FRONT and SURROUND speakers at the same time.  
• Initial setting is 10 feet.  
memo  
• When “S ” is selected in SPEAKER setting mode, the SURROUND distance cannot be set.  
• One step equals about 1 foot (30 cm).  
SP  
A
SIGNAL  
SELECT  
ANALOG  
Press % or to set the distance of the SURROUND speaker  
from the main listening position (up to 30 steps).  
dB  
18  
<ARB7192>  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Preparations  
Dynamic range control setting mode  
Dynamic range indicates in decibels how loud and soft sounds can be played back properly (so that soft sounds are not  
covered by noise and loud sounds are not distorted). Dynamic range control is a function which compresses this  
dynamic range. Even when watching a movie at low volume, setting this function enables low level sounds to be heard  
more easily.  
• Initial setting is “OFF”.  
memo  
• When the volume level is increased, set to OFF.  
• For listening enjoyment at low volumes, set to “MAX” for maximum dynamic range compression.  
• Dynamic range control is effective only when a Dolby Digital signal is being played back.  
SP  
A
SIGNAL  
SELECT  
ANALOG  
Press % or to set the dynamic range control (OFF, MAX or  
MID).  
dB  
Coaxial digital input setting  
Sets the input component to be assigned to the coaxial digital input jack.  
memo  
• Initial setting is “DVD”.  
SP  
A
SIGNAL  
SELECT  
ANALOG  
Press % or to select the coaxial digital input (DVD, TV, CD,  
MD, VCR or OFF).  
dB  
Optical digital input 1 setting  
Sets the input component to be assigned to the optical input 1 jack.  
memo  
• Initial setting is “CD”.  
SP  
A
SIGNAL  
SELECT  
ANALOG  
Press % or to select the optical digital input 1 (DVD, TV, CD,  
MD, VCR or OFF).  
dB  
Optical digital input 2 setting  
Sets the input to be assigned to the optical input 2 terminal.  
memo  
• Initial setting is “MD”.  
SP  
A
SIGNAL  
SELECT  
ANALOG  
Press % or to select the optical digital input 2 (DVD, TV, CD,  
MD, VCR or OFF).  
dB  
19  
<ARB7192>  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setting the volume level of each channel (Adjusting the speaker volume balance)  
• Sound from the SUB WOOFER seems quite.  
• The speaker volume can be adjusted without outputting the test tone by pressing CHANNEL LEVEL or  
CHANNEL SELECT .  
memo  
• Initial setting is 0 dB.  
1 Press button.  
SOURCE  
SELECT  
CHANNEL  
CD  
TAPE  
TUNER  
DVD  
LD  
STANDBY/ON  
STATION  
2 Press VOL + or to adjust the volume to an appropriate  
TV FUNC.  
BAND  
TV VOL.  
FREQ.  
level.  
DIRECT  
MPX  
CLASS  
.ACCESS  
1
4
2
5
8
3
6
9
3 Press TEST TONE to output the test tone.  
TV  
The test tone is output in the following order.  
TEST TONE  
CONTROL  
7
ATT.  
0
SURROUND  
FUNCTION  
CD DISC  
CT  
SL  
FR  
SR  
FL  
3,5  
2
DSP MODE MUTING  
SW  
1
4
CHANNEL  
SELECT  
LEVEL  
RECEIVER  
STANDBY/ON  
MASTER  
VOLUME  
EFFECT  
• Depending on the “SPEAKER setting mode” chosen, some  
channels may not output test tone (refer to page 16).  
Test tone is only output in Dolby mode.  
memo  
AV MULTI-CHANNEL RECEIVER  
REMOTE CONTROL UNIT  
Î
4 Adjust speaker levels so that you hear the test tone at  
the same volume from each speaker when seated in the  
main listening position.  
The channel level ranges 10 dB.  
memo  
• Levels can be set for each surround mode.  
• When both the DSP mode and Dolby Surroud mode are turned  
on, priority is given to the Dolby Surround mode.  
5 Press TEST TONE to turn off the test tone.  
20  
<ARB7192>  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Names of Parts and Basic Operations  
Display  
1
8
9
0 - =  
2
3
4 5  
6
7
AB  
SP  
H.P  
SFC  
ATT  
TAPE2  
DIRECT  
SIGNAL  
SELECT  
ANALOG  
DIGITAL  
AC-3  
MONO  
LOUDNESS STEREO  
TUNED  
MIDNIGHT  
PRO LOGIC  
DIGITAL  
L
LS  
C
S
R
RS  
LFE  
dB  
!
~
@
#
1 SIGNAL SELECT indicators  
9 TAPE2 indicators  
Light to indicate the type of input signal selected for  
the current component (refer to “Front Panel”, !,  
SIGNAL SELECT on pages 23, 24).  
Lights when TAPE 2 MONITOR is on.  
0 H.P indicator  
ANALOG : Lights when the analog audio signals are  
selected.  
DIGITAL : Lights when the digital audio signals are  
selected.  
AC-3 : Lights when a source with Dolby Digital signals  
is played.  
Lights when headphones are plugged in.  
- Tuner indicators  
STEREO : Lights when an FM stereo broadcast is  
received in the auto stereo mode.  
TUNED : Lights when a broadcast is received.  
MONO : Lights when the tuner is set to receive FM  
broadcasts in monaural.  
2 Digital indicators  
PRO LOGIC : When the Dolby mode on the reciever  
is on, this indicator lights during 2 channel playback  
of Dolby Digital sources.  
= Speaker indicators  
Light to indicate the current speaker system (refer to  
“Front Panel”, 7, SPEAKERS (A/B) on pages 23, 24).  
SP 3 A : Lights when speaker system A is selected.  
DIGITAL : When the Dolby mode on the reciever is  
on, this indicator lights to indicate playback of a Dolby  
Digital signal. However,  
PRO LOGIC lights during 2  
SP 3 B : Lights when speaker system B is selected.  
channel playback of Dolby Digital.  
~ Program format indicators  
3 SFC (DSP) mode indicator  
Lights when the DSP mode is selected.  
(Refer to “Surround modes” on page 25)  
The following indicators light to show the channels  
being played back.  
L : Left front*1*2, C : Center*1, R : Right front*1*2,  
LS : Left surround*1,S : Surround (mono)*2,  
RS : Right surround*1  
4 ATT indicator  
*1: Indicates 5.1ch Dolby Digital playback.  
*2: Indicates Dolby Pro Logic playback.  
Lights when ATT (refer to “Remote Control”, 9,  
Number buttons page 22) is used to reduce the level  
of the input signal. (available in ANALOG mode only)  
! LFE indicator  
5 Overload indicator  
LFE (Low Frequency Effects) indicator lights to  
indicate that the program source contains an LFE  
channel. The indicator to the left of LFE lights during  
actual playback of the LFE signals (LFE signals are not  
present in all parts of the sound track).  
When “ANALOG” is selected in SIGNAL SELECT, this  
indicator lights when an excessively strong signal is  
being processed . When this indicator lights, press  
ATT on the remote control to attenuate (lower) the  
signal and prevent distortion.  
@ Character display  
6 MIDNIGHT indicator  
# Volume level display  
Lights when the MIDNIGHT mode is on.  
Displays the volume level. Volume level is maintained  
even when the power is off. ---dB indicates the  
minimum level, and 0dB indicates the maximum  
level.  
7 LOUDNESS indicator  
Lights when loudness is on (refer to “Front Panel”, -  
,LOUDNESS on pages 23, 24).  
• Depending on the level settings for individual  
channels, the MAX level can range between –10dB  
and 0dB.  
8 DIRECT indicator  
Lights when direct playback is on (refer to “Front  
Panel”, (, DIRECT on pages 23, 24).  
21  
<ARB7192>  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Names of Parts and Basic Operations  
Remote Control  
These pages describe the buttons on the remote control used to operate the receiver.  
SOURCE  
SELECT  
CHANNEL  
CD  
TAPE  
TUNER  
DVD  
LD  
STANDBY/ON  
STATION  
TV FUNC.  
BAND  
TV VOL.  
FREQ.  
8
9
DIRECT  
MPX  
CLASS  
.ACCESS  
1
2
3
1
4
2
5
8
3
6
9
TV  
TEST TONE  
CONTROL  
7
ATT.  
0
SURROUND  
FUNCTION  
CD DISC  
0
-
=
~
DSP MODE MUTING  
CHANNEL  
SELECT  
4
5
LEVEL  
RECEIVER  
STANDBY/ON  
MASTER  
VOLUME  
EFFECT  
6
7
AV MULTI-CHANNEL RECEIVER  
REMOTE CONTROL UNIT  
Î
frepuency.  
1 SOURCE SELECT buttons  
9 Number buttons/Surround setting buttons  
Use these buttons to select the remote operation  
These buttons can perform a variety of different  
functions depending on the remote operation mode.  
mode.  
For example, pressing TUNER sets the remote to  
operate the tuner functions.  
[RECEIVER operations (press SURROUND first)]  
%˜fi˜@˜# buttons : Specific use of these buttons is  
described in conjunction with the operations they are  
used in.  
TEST TONE : Press to switch the test tone on or off  
when listening to a surround mode (refer to page 20).  
ATT : Press to attenuate (lower) the level of the input  
signals and prevent distortion (refer to “Display”, 5,  
Overload indicator on page 21).  
2 SURROUND button  
Press to select the receiver for remote control  
operation.  
3 FUNCTION button  
Press repeatedly to select a source.  
4
Press repeatedly to select the  
mode.  
(Dolby) Surround  
[TUNER operations (press TUNER first)]  
(refer to page 28)  
5 CHANNEL SELECT  
Number buttons (0~9) : During preset tuning, use to  
input the number of the preset station. Use to input  
the station frequency during direct tuning.  
Use to select a speaker when adjusting speaker  
levels.  
0 MUTING button  
Press to mute the volume. “MUTING” appears in the  
display. Press again to cancel.  
6 LEVEL (–/+)  
Use to adjust individual speaker levels.  
- DSP MODE  
Press repeatedly to select a DSP sound mode (refer to  
page 29).  
7 RECEIVER STANDBY/ON button  
Press to switch the receiver on or to put in standby.  
= MASTER VOLUME(+/) buttons  
8 TUNER operations(press TUNER first)(refer to  
Press to adjust the volume. When VOL (+/–) buttons  
are pressed while muting, muting is canceled.  
page 32-35)  
CHANNEL STATION(+/–) : Selects next /Previous  
preset station.  
~ EFFECT (+/)  
Use to adjust the DSP mode effect level.  
TV FUNC.BAND : Switches between AM and FM  
bands.  
TV VOL.FREQ. :Changes the tuner frequency.  
MPX : swiches between stereo and mono.  
CLASS :changes preset bank(class)  
22DIRECT ACCESS : allows direct keying in of  
<ARB7192>  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Names of Parts and Basic Operations  
Front Panel  
7
~
1
2
6
=
! @  
3
8
0
-
#
4 5  
9
$
AUDIO/VIDEO MULTI-CHANNEL RECEIVER  
VSX-D498  
MASTER  
VOLUME  
STANDBY  
MPX  
CLASS MEMORY MODE  
DSP  
MODE  
STANDBY/ON  
TUNING  
STATION  
SIGNAL  
SELECT  
+
SELECT  
MIDNIGHT  
FREQUENCY  
+
DOWN  
UP  
SPEAKERS  
BASS  
TREBLE  
A
B
LOUDNESS  
MD/TAPE 1  
DIRECT  
+
+
VIDEO  
INPUT  
L
R
AUDIO  
VIDEO  
PHONES  
TAPE 2  
MONITOR  
CD  
VCR  
DVD/LD  
TV/SAT  
VIDEO  
FM/AM  
DVD 5.1CH  
(
%
^
&
*
)
1
STANDBY/ON button  
9 Display (Refer to page 21)  
Press to switch the receiver on or put in standby.  
0 TREBLE (+/) button  
2 STANDBY indicator  
Used to adjust high frequencies in the range of 6.  
Lights when the receiver is in standby mode. (Please  
note that this receiver consumes a small amount of  
power (2.5 W) during the standby mode.)  
- LOUDNESS button  
Switches the loudness on or off. Use to raise the level  
of the bass and treble frequencies so they can be  
more easily heard when listening at low volumes.  
3 CLASS button  
Press repeatedly to switch the preset station classes.  
(Refer to “Memorizing Frequency Tuned Stations” on  
page 34 and “Recalling the Memorizing Stations” on  
page 35)  
= Remote sensor  
Point the remote control toward the remote sensor to  
operate the receiver.  
4 MEMORY button  
~
button  
Press to memorize a preset station.  
Press to select the  
(Dolby) Surround mode. This  
(Refer to “Memorizing Frequency Tuned Stations” on page  
34)  
mode automatically switches between Dolby Digital  
and Dolby Pro Logic decoding according to the input  
signal. (Refer to page 28 for more information about  
Dolby Digital.)  
5 MPX MODE button  
Press to switch between auto stereo and monaural  
(“MONO”) reception of FM broadcasts. When the  
broadcast signal is weak, selecting “MONO” will  
improve the sound quality.  
6 TUNING SELECT button  
Press to switch between STATION and FREQUENCY.  
7 SPEAKERS (A/B) buttons  
Use to switch the corresponding speaker system on  
or off. To listen to both speaker systems (A and B),  
press the buttons so that both A and B appear in the  
display (refer to “Display”, =, Speaker indicators on  
page 21). Only A speakers are available when using  
surround sound modes.  
8 BASS (+/) button  
Press to adjust low frequencies in the range of 6.  
23  
<ARB7192>  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Names of Parts and Basic Operations  
! SIGNAL SELECT button  
Use to select input signals for the digital components.  
First press DVD/LD, TV/SAT, MD/TAPE 1, CD or VCR  
(& Function buttons) to select the component, then  
press SIGNAL SELECT repeatedly to select one of the  
following:  
ANALOG : Selects the analog (R and L) audio signals.  
DIGITAL : Selects the digital audio signals. This  
receiver automatically detects and displays the  
format of the signal being input. AC-3 lights when  
Dolby Digital signals are input. (Dolby Digital  
decoding is switched automatically.)  
• SIGNAL SELECT is fixed in the “ANALOG” position  
for components not assigned to one of the three  
digital input jacks.  
• Because the audio from a karaoke microphone and  
LD recorded with analog audio only is not output  
from the digital output, set SIGNAL SELECT to  
“ANALOG”.  
• This receiver can only play back Dolby Digital, PCM  
(32kHz, 44kHz, and 48kHz),digital signal formats.  
With digital signal formats other than these, set  
SIGNAL SELECT to “ANALOG”.  
@ DSP MODE button  
Press repeatedly to select a DSP sound mode (HALL 1,  
HALL 2, JAZZ, DANCE, THEATER 1, or THEATER 2).  
Use these modes to produce surround sound from  
standard (two channel) stereo sources.  
# MIDNIGHT button  
Press to hear effective surround sound at low volume  
levels. The effect is automatically adjusted according  
to the volume level.  
$ MASTER VOLUME  
After turning on the desired component, rotate to  
adjust the volume.  
% PHONES jack  
Connect headphones for private listening (the  
speakers turn off automatically).  
^ STATION/FREQUENCY (+/) button  
STATION: Press to select the preset channel.  
FREQUENCY: Press to select the frequency.  
& Function buttons  
Selects the function. Each press switches the DVD/LD  
input between DVD/LD and DVD 5.1 channel.  
* TAPE 2 MONITOR button  
Switches the TAPE 2 monitor on or off (refer to page 36).  
( DIRECT button  
Switches direct playback on or off. Use to bypass the  
receiver’s tone control circuitry or level control for  
higher fidelity to the program source. When DIRECT  
is ON, Dolby, DSP, LOUDNESS and MIDNIGHT mode  
are automatically turned OFF.  
) VIDEO INPUT jacks  
Connect a video camera, video game system, etc. to  
the VIDEO INPUT jacks (refer to page 10).  
24  
<ARB7192>  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Sound Modes  
This receiver incorporates two surround modes for enjoyment of a variety of program sources.  
Surround modes  
(Dolby) Surround mode  
Use this mode when playing Dolby Digital or Dolby Surround software. Decoding switches automatically according to  
the input signal, so all you have to do is enjoy!  
DOLBY  
D I G I T A L  
You can identify Dolby Digital software by the  
or  
marks. Most Dolby Surround software is marked  
AC-3  
D
I
G
I
T
A
L
DOLBY SURROUND  
, but unmarked software may also incorporate Dolby Pro Logic.  
For more information about Dolby formats, refer to page 43.  
DSP modes  
The DSP (Digital Sound Processing) modes allow you to transform your living room into a variety of different sonic  
environments when playing standard (two-channel) stereo sources, Dolby Surround sources, and Dolby Digital  
sources.  
HALL 1  
Simulates the acoustic environment of a large concert hall of wooden construction. Complex delay of reflected  
sounds coupled with reverberation effects create a dynamic and beautiful sound characteristic of an orchestra  
performing in a concert hall, making it suitable for classical music  
HALL 2  
Simulates the acoustic environment of a large concert hall with stone walls. The rich reverberations and natural  
fullness of the sound create the auditory impression of being in a concert hall, making it suitable for classical music.  
JAZZ  
Simulates the acoustic environment of a jazz club. Less delay on the reflected sounds emphasizes the sensation of  
hearing a live band.  
DANCE  
Simulates the acoustic environment and strong bass sound of a nightclub with a square dance floor. A short delay  
on the reflected sounds emulates the raw power of the dance music.  
THEATER 1  
Adjusts the delay of the reflected sound to simulate the acoustic environment of a medium sized movie theater.  
THEATER 2  
Simulates the acoustic environment of a theater while maintaining proper localization of each channel.  
25  
<ARB7192>  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Sound Modes  
Switching ANALOG/DIGITAL Signal Input  
The input of the component set in the digital input setting (refer to page 19) can be switched to an analog or digital  
input signal by pressing the SIGNAL SELECT button.  
1 Press SIGNAL SELECT on the front panel to select the  
input signal corresponding to the source component.  
Each press switches between ANALOG and DIGITAL signal selection.  
SIGNAL  
SELECT  
SP  
A
SIGNAL  
SELECT  
ANALOG  
ANALOG  
SIGNAL  
SELECT  
SP  
A
SIGNAL  
SELECT  
DIGITAL  
DIGITAL  
While SIGNAL SELECT is set to DIGITAL, AC-3 lights when a Dolby  
Digital signal is input.  
2
SIGNAL  
SELECT  
SP  
A
SIGNAL  
SELECT  
DIGITAL  
AC-3  
DIGITAL  
AC-3  
When a Dolgy Digital signal is input.  
SIGNAL SELECT  
memo  
• SIGNAL SELECT is fixed in the “ANALOG” position for components not  
assigned to one of the three digital input jacks.  
• Because the audio from a karaoke microphone and LD recorded with  
analog audio only is not output from the digital output, set SIGNAL  
SELECT to “ANALOG”.  
• This receiver can only play back Dolby Digital, PCM (32kHz, 44kHz, and  
48kHz), digital signal formats. With digital signal formats other than these,  
set SIGNAL SELECT to “ANALOG”.  
26  
<ARB7192>  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Sound Modes  
Playback  
1 Turn on the power of the playback component.  
SOURCE  
SELECT  
CHANNEL  
STATION  
CD  
STANDBY/ON  
TV FUNC.  
BAND  
TV VOL.  
FREQ.  
TAPE  
2 Press RECEIVER STANDBY/ON to turn on the receiver.  
DIRECT  
TUNER  
MPX  
CLASS  
.ACCESS  
Be sure that the standby indicator turns off on  
STANDBY  
indicator  
the front panel.  
DVD  
LD  
1
4
2
5
8
3
6
9
TV  
TEST TONE  
CONTROL  
7
ATT.  
0
SURROUND  
FUNCTION  
CD DISC  
DSP MODE MUTING  
3 Press FUNCTION to select the source you want to  
playback.  
3
2
CHANNEL  
SELECT  
LEVEL  
RECEIVER  
STANDBY/ON  
MASTER  
VOLUME  
EFFECT  
6
The source you want to playback is displayed in the following order:  
AV MULTI-CHANNEL RECEIVER  
REMOTE CONTROL UNIT  
Î
TUNER  
VIDEO  
MD/TAPE 1  
TV/SAT  
VCR  
CD  
DVD/LD  
4 Press SIGNAL SELECT on the front panel to select the  
input signal corresponding to the source component.  
(Refer to “Switching ANALOG/DIGITAL signal input” on page 26.)  
4 6  
5 Start playback of the component you selected in step 1.  
6 Press VOL (+/–) to adjust the volume level in the range of  
--- dB (MIN) to 0 dB (MAX).  
3
2
memo  
• Depending on the channel level setting, the MAX volume level  
may differ 0 to -10 dB from the level displayed.  
27  
<ARB7192>  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Sound Modes  
Playing Sources with Dolby Digital Sound  
SOURCE  
1 Follow steps 1 to 3 of the playback procedure. (Refer to  
SELECT  
CHANNEL  
STATION  
CD  
STANDBY/ON  
Playbackon page 27.)  
TV FUNC.  
BAND  
TV VOL.  
FREQ.  
TAPE  
DIRECT  
TUNER  
MPX  
CLASS  
.ACCESS  
1 Turn on the power of the playback component.  
DVD  
LD  
2 Press RECEIVER  
STADBY/ON to turn on the receiver.  
1
4
2
5
8
3
6
9
3 Press FUNCTION to select the source component you want to play.  
TV  
TEST TONE  
CONTROL  
7
ATT.  
0
SURROUND  
FUNCTION  
CD DISC  
2 Press SIGNAL SELECT on the front panel to select  
DIGITAL.  
DSP MODE MUTING  
CHANNEL  
SELECT  
3
LEVEL  
(Refer to “Switching ANALOG/DIGITAL signal input” on the previous  
page.)  
RECEIVER  
STANDBY/ON  
MASTER  
VOLUME  
EFFECT  
5
AV MULTI-CHANNEL RECEIVER  
REMOTE CONTROL UNIT  
Î
3 Press  
to switch the Dolby Surround mode on.  
4 Start playback of the component you selected in step 1.  
5 Press VOL (+/) to adjust the volume level.  
3
2 5  
memo  
When playing LD recorded in Dolby Digital  
When connecting a DVD/LD player or LD player using the AC-3 RF output, a commercially available RF demodulator  
(RFD-1) is required. The RF demodulator changes the RF signal to a digital signal which is then processed by the  
receiver at the digital input jacks. For more details, refer to the instruction manual supplied with the RFD-1.  
Refer to pages 43 for explanations Dolby Digital, Dolby Pro Logic.  
28  
<ARB7192>  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Sound Modes  
Selecting a Sound Mode  
To ensure the best possible surround sound, be sure to complete the set up procedures described in “Setting Up for  
Surround Sound” (starting on page 15) before using the sound modes. This is particularly important when using the  
(Dolby) Surround mode. When using the sound modes, SPEAKERS A are used. If SPEAKERS B are selected and a  
sound mode is turned on, selection automatically switches to SPEAKERS A only.  
Surrround operation  
Select the sound mode.  
SOURCE  
SELECT  
• For  
(Dolby) \ Press  
CHANNEL  
STATION  
CD  
STANDBY/ON  
TV FUNC.  
BAND  
TV VOL.  
FREQ.  
• For DSP modes \ Press DSP MODE repeatedly  
TAPE  
DIRECT  
Each press changes the DSP mode as follows:  
TUNER  
MPX  
CLASS  
.ACCESS  
DVD  
LD  
1
4
2
5
8
3
6
9
=HALL 1 = HALL 2 = JAZZ = DANCE  
TV  
TEST TONE  
CONTROL  
SFC OFF+ THEATER 2 + THEATER 1 +  
7
ATT.  
SURROUND  
FUNCTION  
CD DISC  
1
2
DSP MODE MUTING  
CHANNEL  
SELECT  
LEVEL  
RECEIVER  
STANDBY/ON  
MASTER  
VOLUME  
EFFECT  
EFFECT +/–  
AV MULTI-CHANNEL RECEIVER  
REMOTE CONTROL UNIT  
Î
memo  
• The amount of effect of each DSP mode can be adjusted in the range of 10  
to 90 (the default setting value is 70) by pressing EFFECT +/–.  
• Dolby Digital or Dolby Srround sources can be used simultaneously with  
DSP modes.  
2
29  
<ARB7192>  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Sound Modes  
DVD 5.1ch Input Playback  
Connect a component with 5.1 channel output to enjoy the surround sound created by 5.1 channel playback.  
Press DVD/LD on the unit.  
Each press switches the input: DVD/LD j DVD 5.1ch  
SP  
A
SIGNAL  
SELECT  
ANALOG  
SP  
A
SIGNAL  
SELECT  
ANALOG  
DIGITAL  
AC-3  
DIGITAL  
j
L
LS  
C
R
RS  
dB  
LEF  
dB  
DVD/LD  
memo  
• When DVD 5.1ch input is selected, Dolby Surround mode, DSP  
mode, SIGNAL SELECT, ATT, DIRECT, TONE, MIDNIGHT mode,  
and speakers B cannot be operated.  
• When DVD 5.1ch input is selected, only the volume level and  
channel levels can be set.  
Listening in MIDNIGHT Listening Mode  
When the volume is low, surround effects tend to become less than satisfactory. Turn the MIDNIGHT listening mode on  
to enjoy the effects of quality surround sound even at low volumes. This mode allows you to hear effective surround  
sound of movies at low volume levels.  
Press MIDNIGHT.  
Each press switches MIDNIGHT listening mode on or off.  
MIDNIGHT  
A
SP  
SIGNAL  
SELECT  
ANALOG  
MIDNIGHT  
DIGITAL  
AC-3  
DIGITAL  
L
C
R
LS  
RS  
LEF  
dB  
memo  
The effect automatically adjusts according to the volume level.  
30  
<ARB7192>  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Sound Modes  
Adjusting Bass and Treble Frequencies (Tone Control)  
Use BASS (+/–) or TREBLE (+/–) to adjust the low and high frequencies.  
Press BASS (+/) to adjust the low frequencies.  
TREBLE +/–  
SP  
A
SIGNAL  
SELECT  
ANALOG  
dB  
Press TREBLE (+/) to adjust the high frequencies.  
BASS +/–  
SP  
A
SIGNAL  
SELECT  
ANALOG  
dB  
memo  
• The tone control can be adjusted in a range of 6.  
• Pressing + and – simultaneously restores the setting to 0.  
• In cases described below, the tone control cannot be adjusted.  
1 Dolby Surround mode is ON.  
2 DSP mode is ON.  
3 DVD 5.1ch input is selected.  
4 Dolby Digital signals are being input.  
31  
<ARB7192>  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Tuner Operations  
Automatic and Manual Tuning  
The following steps show you how to tune in FM and AM radio broadcasts using the automatic (search) and manual  
(step) tuning functions. If you already know the exact frequency of the station you want, see “Direct Tuning” on the  
following page.  
1 Press FUNCTION repeatedly on the remote or FM/AM on  
the front panel to select the tuner. Press TUNER to set  
SOURCE  
the remote to the tuner operation mode.  
SELECT  
CHANNEL  
CD  
TAPE  
TUNER  
DVD  
LD  
STANDBY/ON  
STATION  
TV FUNC.  
BAND  
TV VOL.  
FREQ.  
The station you were previously tuned to is received automatically.  
3
MPX  
MODE  
DIRECT  
2
1
MPX  
CLASS  
.ACCESS  
A
SP  
SIGNAL  
SELECT  
ANALOG  
1
4
2
5
8
3
6
9
dB  
TV  
TEST TONE  
CONTROL  
7
ATT.  
0
SURROUND  
FUNCTION  
CD DISC  
DSP MODE MUTING  
2 Press TV FUNC.BAND on the remote or FM/AM on the  
front panel to select the band (FM or AM).  
Each press switches the band: FM j AM  
CHANNEL  
SELECT  
LEVEL  
RECEIVER  
STANDBY/ON  
MASTER  
VOLUME  
EFFECT  
4
AV MULTI-CHANNEL RECEIVER  
REMOTE CONTROL UNIT  
Î
SP  
A
SP  
A
SIGNAL  
SELECT  
ANALOG  
SIGNAL  
SELECT  
ANALOG  
j
dB  
dB  
3 Tune in the station.  
For Automatic Tuning  
Press and hold TV VOL.FREQ.(+/– ) for about one second, then release.  
The tuner starts searching the selected band and stops automatically at  
the first station it locates. Repeat to locate other stations.  
For Manual Tuning  
To change frequencies one step at a time, press TV VOL.FREQ.(+/– )  
repeatedly.  
To change frequencies quickly, hold down TV VOL.FREQ.(+/– ) and  
release when you reach the frequency you want.  
MPX MODE  
3
When using the front panel  
Press FREQUENCY (+/–) until the frequency you want appears in the  
display.  
4 Adjust the volume.  
MPX Mode  
2
4
If the TUNED or STEREO indicators do not light when tuning an FM station,  
because the station is too far away or the broadcast signal is weak, press  
MPX MODE on the front panel to switch to monaural (MONO) reception.  
This should improve reception enough for you to enjoy the broadcast.  
32  
<ARB7192>  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Tuner Operations  
Direct Tuning  
The following steps show you how to tune directly to a specific frequency using the remote control.  
1 Press FUNCTION repeatedly on the remote or FM/AM on  
the front panel to select the tuner. Press TUNER to set  
the remote to the tuner operation mode.  
SOURCE  
SELECT  
CHANNEL  
STATION  
CD  
TAPE  
TUNER  
DVD  
LD  
STANDBY/ON  
TV FUNC.  
BAND  
TV VOL.  
FREQ.  
The station you were previously tuned to is received automatically.  
DIRECT  
MPX  
CLASS  
.ACCESS  
2
1
3
4
1
4
2
5
8
3
6
9
2 Press TV FUNC.BAND to select the band (FM or AM).  
TV  
TEST TONE  
CONTROL  
7
Each press switches the band: FM j AM  
ATT.  
0
SURROUND  
FUNCTION  
CD DISC  
DSP MODE MUTING  
CHANNEL  
SELECT  
LEVEL  
3 Press DIRECT ACCESS to activate the direct tuning mode.  
RECEIVER  
STANDBY/ON  
MASTER  
VOLUME  
EFFECT  
The cursor blinks in the display on the front panel.  
AV MULTI-CHANNEL RECEIVER  
REMOTE CONTROL UNIT  
Î
A
SP  
SIGNAL  
SELECT  
ANALOG  
dB  
4 Use the number buttons to enter the frequency of the  
station you want.  
Example:  
To tune station 106.00 (FM), press: 1 = ` = 6 = ` = `  
A
SP  
SIGNAL  
SELECT  
ANALOG  
dB  
To cancel before inputting the frequency  
Press DIRECT ACCESS, and enter the frequency again.  
33  
<ARB7192>  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Tuner Operations  
Memorizing Frequently Tuned Stations  
The following steps show you how to memorize up to 30 radio stations in 3 classes (each holding 10 channels). When  
memorizing FM frequencies, the receiver also memorizes the MPX mode (STEREO or MONO).  
Using the front panel  
3 2  
1 Tune to the desired station.  
See “Automatic and Manual Tuning” or “Direct Tuning” on pages 32, 33.  
2 Press MEMORY to activate the memory function.  
“A--” blinks in the display.  
A
SP  
SIGNAL  
SELECT  
ANALOG  
4
dB  
3 Press CLASS repeatedly to select a class.  
Each press switches the display:  
= CLASS A = CLASS B = CLASS C  
4 Press STATION (+/) to select a channel (1~10) within the  
respective class.  
A
SP  
SIGNAL  
SELECT  
ANALOG  
dB  
The station is memorized automatically after 5 seconds.  
Repeat steps 1 through 4 to memorize up to 30 stations.  
34  
<ARB7192>  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Tuner Operations  
Recalling the Memorized Stations  
Using the remote control  
1 Press FUNCTION repeatedly on the remote or FM/AM on  
the front panel to select the tuner. Press TUNER to set  
the remote to the tuner operation mode.  
SOURCE  
SELECT  
The station you were previously tuned to is received automatically.  
CHANNEL  
STATION  
CD  
TAPE  
TUNER  
DVD  
LD  
STANDBY/ON  
TV FUNC.  
BAND  
TV VOL.  
FREQ.  
STATION  
A
SP  
SIGNAL  
SELECT  
ANALOG  
+/–  
DIRECT  
MPX  
CLASS  
.ACCESS  
2
1
dB  
1
4
2
5
8
3
6
9
TV  
TEST TONE  
CONTROL  
3
7
ATT.  
0
SURROUND  
FUNCTION  
CD DISC  
2 Press CLASS repeatedly to select a class.  
DSP MODE MUTING  
Each press switches the display:  
CHANNEL  
SELECT  
LEVEL  
= CLASS A = CLASS B = CLASS C  
RECEIVER  
STANDBY/ON  
MASTER  
VOLUME  
EFFECT  
AV MULTI-CHANNEL RECEIVER  
REMOTE CONTROL UNIT  
Î
3 Use the number buttons to select the channel you want.  
To select channel 7, press 7.  
To select channel 10, press `.  
For example : If 99.50 MHz (FM) was memorized in class B at channel 7.  
A
SP  
SIGNAL  
SELECT  
ANALOG  
dB  
To skip through each channel in order  
Press STATION +/– repeatedly.  
Using the front panel  
2
1 Press FM/AM.  
2 Press CLASS repeatedly to select a class.  
3 Press STATION +/to select the channel you want.  
3
1
35  
<ARB7192>  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Other Operations  
Recording from Audio Components  
The following operations show you how to record audio to the cassette, DAT, or MD deck connected to the MD/TAPE 1  
or TAPE 2 MONITOR jacks.  
The receiver’s volume, tone (BASS, TREBLE, and LOUDNESS), and surround effects have no effect on the  
recorded signal.  
memo  
1 Select the component you want to record.  
Be sure to press SIGNAL SELECT on the front panel to choose  
“ANALOG”. (Refer to “Switching ANALOG/DIGITAL signal input” on  
page 26.)  
SOURCE  
SELECT  
CD  
CHANNEL  
STANDBY/ON  
STATION  
TV FUNC.  
BAND  
TV VOL.  
FREQ.  
TAPE  
2 Prepare the program source.  
DIRECT  
TUNER  
MPX  
CLASS  
.ACCESS  
(Tune in the radio station or load the CD, etc.)  
DVD  
LD  
1
4
2
5
8
3
6
9
3 Insert a blank tape into the cassette deck (MD/TAPE 1 or  
TAPE 2 MONITOR) and adjust the recording level (if necessary).  
TV  
TEST TONE  
CONTROL  
7
ATT.  
0
SURROUND  
FUNCTION  
CD DISC  
DSP MODE MUTING  
1
CHANNEL  
SELECT  
LEVEL  
4 Start recording on the cassette deck, then start playback  
from the source component.  
RECEIVER  
STANDBY/ON  
MASTER  
VOLUME  
EFFECT  
AV MULTI-CHANNEL RECEIVER  
REMOTE CONTROL UNIT  
Î
Record monitor (TAPE 2 MONITOR)  
If you connect a cassette deck (etc.) with a record monitor function to the  
TAPE 2 MONITOR jacks, you can listen to the sound of the recording as it is  
being recorded.  
SIGNAL SELECT  
Press TAPE 2 MONITOR to switch between the sound of the  
recording (TAPE 2 indicator on) and the sound of the source  
component (TAPE 2 indicator off).  
• This receiver outputs the input signal directly to the recording  
memo  
device. As there is no conversion of the audio signal,  
recordings cannot be made from analog to digital, and similarly  
from digital to analog.  
• The MD/TAPE 1 function is not able to record the TAPE 2  
MONITOR.  
TAPE 2  
MONITOR  
1
36  
<ARB7192>  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Other Operations  
Recording from Video Components  
The following operations show you how to record audio and video to the video tape recorder connected to the VCR  
jacks.  
The receiver’s volume, tone (BASS, TREBLE, and LOUDNESS), and surround effects have no effect on the  
recorded signal.  
memo  
1 Select the component you want to record.  
Be sure to press SIGNAL SELECT on the front panel to choose  
“ANALOG”. (Refer to “Switching ANALOG/DIGITAL signal input” on  
page 26.)  
SOURCE  
SELECT  
CHANNEL  
CD  
STANDBY/ON  
STATION  
TV FUNC.  
BAND  
TV VOL.  
FREQ.  
TAPE  
2 Prepare the program source.  
DIRECT  
TUNER  
MPX  
CLASS  
.ACCESS  
(Load the DVD or LD, etc.)  
DVD  
LD  
1
4
2
5
8
3
6
9
TV  
TEST TONE  
CONTROL  
3 Insert a blank tape into the video tape recorder VCR.  
7
ATT.  
0
SURROUND  
FUNCTION  
CD DISC  
DSP MODE MUTING  
1
CHANNEL  
SELECT  
4 Start recording on the video tape recorder, then start  
playback from the source component.  
LEVEL  
RECEIVER  
STANDBY/ON  
MASTER  
VOLUME  
EFFECT  
AV MULTI-CHANNEL RECEIVER  
REMOTE CONTROL UNIT  
Î
• Recording cannot be made from analog to digital, and similarly  
from digital to analog.  
memo  
• When recording a DVD, the recorded image may flicker or be  
difficult to view because of the copy protection signal  
programmed on the DVD.  
SIGNAL SELECT  
1
37  
<ARB7192>  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Other Operations  
Remote Controlling Other PIONEER Components  
DVD player operations  
Before to performing these operations, press the DVD (SOURCE SELECT) button to switch the remote to the  
DVD operation mode.  
memo  
1
Press to switch the DVD player on or off.  
2 7  
SOURCE  
SELECT  
CHANNEL  
Press to stop playback. (With certain models,  
pressing this button when the unit is stopped may  
open the disc tray.)  
CD  
TAPE  
TUNER  
DVD  
LD  
STANDBY/ON  
STATION  
1
TV FUNC.  
BAND  
TV VOL.  
FREQ.  
4
DIRECT  
5
6
2
3
MPX  
CLASS  
.ACCESS  
3 8  
Press to pause playback. (With certain models, this  
button may freeze the frame.)  
1
4
2
5
8
3
6
9
DVD  
TV  
TEST TONE  
CONTROL  
4 4˜¢  
7
ATT.  
SURROUND  
FUNCTION  
CD DISC  
4 : Press to return to the beginning of the current  
chapter (track). Press repeatedly to return to the  
beginning of previous chapters (tracks).  
DSP MODE MUTING  
CHANNEL  
SELECT  
LEVEL  
¢ : Press to advance to the beginning of the next  
chapter (track). Press repeatedly to advance to the  
beginning of following chapters (tracks).  
RECEIVER  
STANDBY/ON  
MASTER  
VOLUME  
EFFECT  
AV MULTI-CHANNEL RECEIVER  
REMOTE CONTROL UNIT  
Î
5 1˜¡  
1 : Hold down for fast reverse playback.  
¡ : Hold down for fast forward playback.  
6 3  
Press to start playback.  
38  
<ARB7192>  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Other Operations  
LD player operations  
Before to performing these operations, press the LD (SOURCE SELECT) button to switch the remote to the LD  
operation mode.  
memo  
1
Press to switch the LD player on or off.  
2 7  
SOURCE  
SELECT  
CHANNEL  
Press to stop playback. (With certain models,  
pressing this button when the unit is stopped may  
open the disc tray.)  
CD  
TAPE  
TUNER  
DVD  
LD  
STANDBY/ON  
STATION  
1
TV FUNC.  
BAND  
TV VOL.  
FREQ.  
4
DIRECT  
5
6
2
3
MPX  
CLASS  
.ACCESS  
3 8  
Press to pause playback. (With certain models, this  
button may set still pictures.)  
1
4
2
5
8
3
6
9
LD  
TV  
TEST TONE  
CONTROL  
4 4˜¢  
7
ATT.  
SURROUND  
FUNCTION  
CD DISC  
4 : Press to return to the beginning of the current  
chapter (track). Press repeatedly to return to the  
beginning of previous chapters (tracks).  
7
DSP MODE MUTING  
CHANNEL  
SELECT  
LEVEL  
¢ : Press to advance to the beginning of the next  
chapter (track). Press repeatedly to advance to the  
beginning of following chapters (tracks).  
RECEIVER  
STANDBY/ON  
MASTER  
VOLUME  
EFFECT  
AV MULTI-CHANNEL RECEIVER  
REMOTE CONTROL UNIT  
Î
5 1˜¡  
1 : Hold down for fast reverse playback.  
¡ : Hold down for fast forward playback.  
6 3  
Press to start playback.  
7 CD DISC(+)  
Switches between sides A and B of the disc.  
39  
<ARB7192>  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Other Operations  
TV operations  
memo  
Before to performing these operations, press TV CONTROL (SOURCE SELECT) to switch the remote to the TV  
operation mode.  
1
Press to switch the TV on or off.  
2 TV FUNC.  
Press to switch the TV’s input (not possible with all  
models). (This operation is possible regardless of the  
SOURCE  
current remote operation mode.)  
SELECT  
CHANNEL  
CD  
TAPE  
TUNER  
DVD  
LD  
STANDBY/ON  
STATION  
1
2
3 CHANNEL (+/–)  
TV FUNC.  
BAND  
TV VOL.  
FREQ.  
3
4
Use to select a TV channel.  
DIRECT  
MPX  
CLASS  
.ACCESS  
4 TV VOL. (+/–)  
1
4
2
5
8
3
6
9
Use to adjust the volume of the TV.  
TV  
TEST TONE  
CONTROL  
7
TV  
CONTROL  
ATT.  
SURROUND  
FUNCTION  
CD DISC  
DSP MODE MUTING  
CHANNEL  
SELECT  
LEVEL  
RECEIVER  
STANDBY/ON  
MASTER  
VOLUME  
EFFECT  
AV MULTI-CHANNEL RECEIVER  
REMOTE CONTROL UNIT  
Î
40  
<ARB7192>  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Other Operations  
CD player operations  
memo  
Before to performing these operations, press the CD (SOURCE SELECT) button to switch the remote to the  
CD operation mode.  
1
Press to switch the CD player on or off.  
2 7  
SOURCE  
SELECT  
CHANNEL  
Press to stop playback.  
CD  
TAPE  
TUNER  
DVD  
LD  
STANDBY/ON  
STATION  
CD  
1
TV FUNC.  
BAND  
TV VOL.  
FREQ.  
4
3 8  
DIRECT  
5
6
2
3
MPX  
CLASS  
Press to pause playback.  
.ACCESS  
4 4˜¢  
1
4
2
5
8
3
6
9
4 : Press to return to the beginning of the current  
track. Press repeatedly to return to the beginning of  
previous tracks.  
¢ : Press to advance to the beginning of the next  
track. Press repeatedly to advance to the beginning of  
following tracks.  
TV  
TEST TONE  
CONTROL  
7
ATT.  
SURROUND  
FUNCTION  
CD DISC  
7
DSP MODE MUTING  
CHANNEL  
SELECT  
LEVEL  
5 1˜¡  
RECEIVER  
STANDBY/ON  
MASTER  
VOLUME  
EFFECT  
1 : Hold down for fast reverse playback.  
¡ : Hold down for fast forward playback.  
AV MULTI-CHANNEL RECEIVER  
REMOTE CONTROL UNIT  
Î
6 3  
Press to start playback.  
7 CD DISC(+/)  
For multi-disc CD changers, use to select the disc  
numbers (not possible with all models).  
41  
<ARB7192>  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Other Operations  
Cassette deck operations  
memo Before to performing these operations, press the TAPE (SOURCE SELECT) button to switch the remote to the  
TAPE operation mode.  
1
Press to switch the cassette deck on or off (not  
possible with all models).  
2 7  
Press to stop playback or recording.  
SOURCE  
SELECT  
CHANNEL  
CD  
TAPE  
TUNER  
DVD  
LD  
STANDBY/ON  
STATION  
3 8  
1
TV FUNC.  
BAND  
TV VOL.  
FREQ.  
4
Press to pause playback or recording.  
TAPE  
2
3
DIRECT  
5
6
MPX  
CLASS  
.ACCESS  
4 2  
Plays in the direction of the arrow.  
1
4
2
5
8
3
6
9
5 1˜¡  
TV  
1 : Press to rewind the tape. Hold down during  
playback for fast reverse playback (not possible with  
all models).  
TEST TONE  
CONTROL  
7
ATT.  
0
SURROUND  
FUNCTION  
CD DISC  
7
DSP MODE MUTING  
¡ : Press to fast forward the tape. Hold down during  
playback for fast forward playback (not possible with  
all models).  
CHANNEL  
SELECT  
LEVEL  
RECEIVER  
STANDBY/ON  
MASTER  
VOLUME  
EFFECT  
6 3  
AV MULTI-CHANNEL RECEIVER  
REMOTE CONTROL UNIT  
Î
Press to start playback.  
7 Number buttons  
Use to operate deck 1 of a double cassette deck (not  
possible with all cassette decks).  
7 button (2)  
Plays in the direction of the arrow.  
8 button (1)  
Press to rewind the tape. Hold down during playback  
for fast reverse playback (not possible with all  
models).  
9 button (¡)  
Press to fast forward the tape. Hold down during  
playback for fast forward playback.  
0 button (8)  
Press to fast forward the tape. Hold down during  
playback for fast forward playback.  
CD DISC + (3)  
Press to start playback.  
CD DISC (7)  
Press to stop playback or recording.  
42  
<ARB7192>  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Additional Information  
Dolby Digital  
Dolby Digital is a compression format which records the  
sound of 6 channels of the theater surround system  
(Dolby Digital) on the movie film digital track. Of the 6  
channels, the sub woofer channel is intended for bass  
only, and because the frequency range is smaller than  
the main channel, it is expressed as 5.1 channel.  
Dolby Digital is the name of the Dolby surround multi-  
channel digital system that was developed after the  
Dolby Surround System and Dolby Pro Logic Surround  
System.  
In reproducing audio signals, the smaller the bit number  
used, the lower the sound quality. With AC-3, drop in  
auditory sound quality is prevented by using masking  
technology and digital filtering technology based on the  
human auditory characteristics.  
Laser disc format  
Laser discs are now available on the market in large  
numbers. This means that the recording of different  
format audio signals on the laser disc raises the  
important question of compatibility with existing laser  
discs. Dolby Digital tracks on Laser Discs record signals  
using the space of one analog audio channel so it will  
maintain compatibility with existing discs and players.  
5.1 channel digital  
surround track  
4 channel analog  
sound track (Matrix)  
As shown in the following figure, the digital audio  
sounds of Dolby Digital discs can be played back as  
currently done. Analog sounds are played back by using  
the other channel without the Dolby Digital signals for  
monaural audio signals.  
Dolby Digital  
sound  
(Monaural)  
Analog sound  
(Monaural)  
Video  
Digital  
sound  
AC-3  
encoding  
Frequency  
2
4
6
8
10  
12  
14 MHz  
AC-3 for motion picture  
Comparison with Dolby Pro Logic Surround  
The number of movies made using Dolby Digital since  
1992 has exceeded 300 and continues to increase. For  
compact disc players and laser disc digital sounds, 16  
bits are used to sample the original analog audio  
waveform and sampling is carried out 44,100 times every  
second. However because an enormous amount of  
recording signal data is required for the multi channel  
system with this method, AC-3 is used to compress the  
data.  
Dolby Digital is also known as the 5.1 channel system. It  
is equipped with 5 channels (front left, front right, center,  
surround left, surround right) in the frequency range  
from 20 Hz to 20 kHz and an independent Low Frequency  
Effect (LEF) channel. The sub woofer channel is also  
called Low Frequency Effect (LFE).  
The subwoofer channel can be used as desired to enjoy  
strong bass sounds.  
The following table shows the comparison with Dolby  
Pro Logic Surround effects.  
Dolby Digital  
Dolby Pro Logic Surround  
5.1 channels (Max.)  
5.1 channels (Max.)  
2 channels  
4 channels  
No. of recorded channels  
No. of playback channels  
Playback channel structure  
Front Left, Front Right, Center, Surround Left,  
Surround Right, Sub Woofer  
Front Left, Front Right, Center,  
Surround  
Analog matrix processing  
7,000 Hz  
Sound processing  
Digital discrete processing  
20,000 Hz  
Rear (Surround) high  
frequency playback limit  
Other  
• 5.1 completely independent channels  
• High dynamic range  
• Stable position, high phase characteristics, and  
advanced surround effects reproduction  
• High efficiency  
(Compression rate of about one-tenth)  
43  
<ARB7192>  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Additional Information  
Troubleshooting  
Incorrect operations are often mistaken for trouble and malfunctions. If you think that there is something wrong with  
this component, check the points below. Sometimes the trouble may lie in another component. Investigate the other  
components and electrical appliances being used. If the trouble cannot be rectified even after exercising the checks  
listed below, ask your nearest PIONEER authorized service center or your dealer to carry out repair work.  
Symptom  
Cause  
Remedy  
The power does not turn ON.  
• The power plug is disconnected.  
• Connect the power plug to the wall  
outlet.  
• The protection circuit may have  
been activated.  
• Disconnect the power plug from  
the outlet, and insert again.  
The unit does not respond when the  
buttons are pressed.  
• Static electricity caused by dry air.  
• Improper connections.  
• Sound is muted.  
• Disconnect the power plug from  
the outlet, and insert again.  
No sound is output when a function  
is selected.  
• Make sure the component is  
connected correctly (refer to pages  
9 to 13).  
• Press MUTING on the remote  
control.  
• The volume is turned down.  
• The TAPE 2 MONITOR is ON.  
• Speakers are turned OFF.  
• Adjust MASTER VOLUME.  
• Press the TAPE 2 MONITOR button.  
Press SPEAKERS (A/B) to select the  
speakers you connected.  
No image is output when a function  
is selected.  
• Improper connections.  
• Make sure the component is  
connected correctly (refer to pages  
10, 11).  
• The input source is not properly  
selected.  
• Press the correct function button.  
Considerable noise in radio  
broadcasts.  
• Incorrect frequency.  
Tune in the correct frequency.  
• Connect the antenna (refer to page 8).  
• Route AC-3 RF and digital cables  
away from the antenna terminals  
and wires.  
• The antenna is not connected.  
• AC-3 RF and/or digital cables are  
near the antenna terminals and  
wires.  
FM broadcasts  
• The FM antenna is not fully  
• Fully extend the FM wire antenna,  
position for best reception, and  
secure to a wall.  
• Connect an outdoor FM antenna  
(refer to page 8).  
extended or is poorly positioned.  
• Weak radio signals.  
AM broadcasts  
• The AM antenna is poorly  
positioned.  
• Adjust the direction and position  
for best reception.  
• Connect an additional internal or  
external AM antenna (refer to page 8).  
Turn off the equipment causing the  
noise or move it away from the  
receiver.  
• Weak radio signals.  
• Interference cause by other  
equipment (fluorescent lamp,  
motor, etc.).  
• Place the antenna farther away  
from the equipment causing the  
noise.  
44  
<ARB7192>  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Additional Information  
Remedy  
Symptom  
Cause  
Broadcast stations cannot be selected  
automatically.  
• Weak radio signals.  
• Connect an outdoor antenna (refer  
to page 8).  
No sound from surround or center  
speakers.  
• Speaker settings are incorrect.  
• Refer to “SPEAKER setting mode”  
on page 16 to check the speaker  
settings.  
• The rear and/or center levels are  
turned down.  
• Refer to “Adjusting the speaker  
volume” on page 20 to check the  
speaker levels.  
• The surround and/or center  
speakers are disconnected.  
• Connect the speakers (refer to  
page 13).  
Sound is produced from other  
components, but not from LD or DVD  
player.  
• SIGNAL SELECT is set incorrectly.  
• Set SIGNAL SELECT to "DIGITAL" or  
"ANAROG" according to the type of  
connections made. (refer to page 26)  
• Set the digital input setting  
• The digital inputs are assigned  
incorrectly, or not at all.  
correctly (refer to page 15, 19).  
Cannot be remote controlled.  
• The remote control batteries have  
worn out.  
• Replace the batteries (refer to page 6).  
Too far away or bad angle of  
operation.  
• Operate within 23 feet (7 m), 30° of  
the remote sensor on the front  
panel (refer to page 7).  
• Remove the obstacle or operate  
from another position.  
• Avoid exposing the remote sensor  
on the front panel to direct light.  
• There is an obstacle between the  
receiver and the remote control.  
• Strong light such as fluorescent  
light is shining onto the unit's  
remote control signal light-  
receiving window.  
• A cord is connected to the  
CONTROL IN terminal on this unit.  
• Connect cord to the correct jack.  
The display is dark.  
• This is not a malfunction.  
• In standby, pressing STANDBY/  
ON while holding down the  
button (both on the front panel)  
returns the display to the default  
brightness.  
If the unit does not operate normally due to external effects such as static electricity  
Disconnect the power plug from the outlet and insert again to return to normal operating conditions.  
45  
<ARB7192>  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Additional Information  
Specifications  
Distortion .................................................... Stereo: 0.5 % (1 kHz)  
Alternate Channel Selectivity ............................. 60 dB (400 kHz)  
Stereo Separation ................................................... 40 dB (1 kHz)  
Frequency Response ............................. 30 Hz to 15 kHz ( 1) dB  
Antenna Input ................................................... 75 unbalanced  
Amplifier Section  
Continuous average power output of 80  
watts* per channel, min., at 8 ohms, from 20  
Hz to 20,000 Hz with no more than 0.09 %**  
total harmonic distortion (front).  
AM Tuner Section  
Continuous Power Output  
Frequency Range ........................................530 kHz to 1,700 kHz  
Sensitivity (IHF, Loop antenna) .................................... 350 µV/m  
Selectivity ............................................................................ 25 dB  
Signal-to-Noise Ratio .......................................................... 50 dB  
Antenna ...................................................................Loop antenna  
Front ...................................... 80 W + 80 W (1 kHz, 0.8 %, 8 )  
Center ................................................. 80 W (1 kHz, 0.8 %, 8 )  
Rear ....................................... 80 W + 80 W (1 kHz, 0.8 %, 8 )  
Input (Sensitivity/Impedance)  
VCR, DVD/LD, TV/SAT, VIDEO, CD, MD/TAPE1, TAPE 2  
........................................................................200 mV/47 kΩ  
Frequency Response  
VCR, DVD/LD, TV/SAT, VIDEO, CD, MD/TAPE1, TAPE 2  
.......................................................5 Hz to 100,000 Hz dB  
Output (Level/Impedance)  
Miscellaneous  
Power Requirements ..........................................AC 120 V, 60 Hz  
Power Consumption ............................................. 280 W, 400 VA  
Power Consumption in Standby mode ............................. 2.5 W  
AC Outlet  
+0  
3  
VCR REC, MD/TAPE1 REC, TAPE 2 REC ..........200 mV/2.2 kΩ  
Tone Control  
SWITCHED ............................................... 100 W (0.8 A) MAX  
Dimensions ....................................................................................  
420 (W) × 158 (H) × 391 (D) mm  
16-9/16 (W) × 6-1/4 (H) × 15-3/8 (D) in  
Weight (without package)..............................9.8 kg (21 lb 10 oz)  
BASS ................................................................. 6 dB (100 Hz)  
TREBLE .............................................................. 6 dB (10 kHz)  
LOUDNESS ................................. +9 dB/+7 dB (100 Hz/10 kHz)  
Signal-to-Noise Ratio (IHF, short circuited, A network)  
VCR, DVD/LD, TV/SAT, VIDEO, CD, MD/TAPE1, TAPE 2  
..................................................................................... 97 dB  
Signal-to-Noise Ratio [EIA, at 1 W (1 kHz)]  
Furnished Parts  
FM Antenna ................................................................................. 1  
AM Loop Antenna ....................................................................... 1  
Dry Cell Batteries (SIZE AA(IEC R6P)) ................................... 2  
Remote Control Unit ................................................................... 1  
Operating Instructions ................................................................ 1  
VCR, DVD/LD, TV/SAT, VIDEO, CD, MD/TAPE1, TAPE 2  
..................................................................................... 80 dB  
*
Measured pursuant to the Federal Trade Commissions Trade  
Regulation rule on Power Output Claims for Amplifiers.  
** Measured by Audio Spectrum Analyzer.  
VIDEO Section  
NOTE:  
Specifications and the design are subject to possible modifications  
without notice, due to improvements.  
Input (Sensitivity/Impedance)  
VCR, DVD/LD, TV/SAT, VIDEO............................... 1 Vp-p/75 Ω  
Output (Level/Impedance)  
VCR, MONITOR ...................................................... 1 Vp-p/75 Ω  
Frequency Response  
VCR, MONITOR .......................................... 5 Hz to 7 MHz dB  
+0  
3  
Signal-to-Noise Ratio .......................................................... 55 dB  
Cross Talk ............................................................................. 55 dB  
FM Tuner Section  
Frequency Range ...................................... 87.5 MHz to 108 MHz  
Usable Sensitivity ................. Mono: 13.2 dBf, IHF (1.3 µV/75 )  
50 dB Quieting Sensitivity .................................. Mono: 20.2 dBf  
Stereo: 38.6 dBf  
Signal-to-Noise Ratio ............................ Mono: 73 dB (at 85 dBf)  
Stereo: 70 dB (at 85 dBf)  
46  
<ARB7192>  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Should this product require service in the U.S.A. and you wish to locate the nearest Pioneer  
Authorized Independent Service Company, or if you wish to purchase replacement parts, operating  
instructions, service manuals, or accessories, please call the number shown below.  
8 0 0 4 2 1 1 4 0 4  
Please do not ship your product to Pioneer without first calling the Customer Service Department at  
the above listed number for assistance.  
PIONEER ELECTRONICS SERVICE, INC.  
CUSTOMER SERVICE DEPARTMENT  
P.O. BOX 1760, LONG BEACH,  
CA 90801-1760, U.S.A.  
For warranty information please see the Limited Warranty sheet included with your product.  
47  
<ARB7192>  
Download from Www.Somanuals.com. All Manuals Search And Download.  
We Want You Listening For A Lifetime  
EIA  
Used wisely, your new sound equipment will provide a lifetime of fun  
and enjoyment. Since hearing damage from loud noise is often undetectable  
until it is too late, this manufacturer and the Electronic Industries  
Association’s Consumer Electronics Group recommend you avoid  
prolonged exposure to excessive noise. This list of sound levels is included  
for your protection.  
We  
EST 1924  
Want You  
LISTENING  
For A Lifetime  
Selecting fine audio equipment such as the unit you’ve just purchased  
is only the start of your musical enjoyment. Now it’s time to consider how  
you can maximize the fun and excitement your equipment offers. This  
manufacturer and the Electronic Industries Association’s Consumer  
Electronics Group want you to get the most out of your equipment by  
playing it at a safe level. One that lets the sound come through loud and  
clear without annoying blaring or distortion-and, most importantly, without  
affecting your sensitive hearing.  
Decibel  
Level Example  
30  
40  
50  
60  
70  
80  
Quiet library, soft whispers  
Living room, refrigerator, bedroom away from traffic  
Light traffic, normal conversation, quiet office  
Air conditioner at 20 feet, sewing machine  
Vacuum cleaner, hair dryer, noisy restaurant  
Average city traffic, garbage disposals, alarm clock  
at two feet.  
Sound can be deceiving. Over time your hearing “comfort level” adapts  
to higher volumes of sound. So what sounds “normal” can actually be loud  
and harmful to your hearing. Guard against this by setting your equipment  
at a safe level BEFORE your hearing adapts.  
THE FOLLOWING NOISES CAN BE DANGEROUS UNDER  
CONSTANT EXPOSURE  
90  
Subway, motorcycle, truck traffic, lawn mower  
Garbage truck, chain saw, pneumatic drill  
Rock band concert in front of speakers, thunderclap  
Gunshot blast, jet plane  
To establish a safe level:  
100  
120  
140  
180  
• Start your volume control at a low setting.  
• Slowly increase the sound until you can hear it comfortably and clearly,  
and without distortion.  
Rocket launching pad  
Once you have established a comfortable sound level:  
• Set the dial and leave it there.  
Information courtesy of the Deafness Research Foundation.  
S
Taking a minute to do this now will help to prevent hearing damage or  
loss in the future. After all, we want you listening for a lifetime.  
T
C
S
EIA  
We  
Want You  
EST 1924  
S
O
O
LISTENING  
For A Lifetime  
Power cord CAUTION!  
Maintenance of External Surfaces  
Use a polishing cloth or dry cloth to wipe off dust  
and dirt.  
When the surfaces are dirty, wipe with a soft cloth  
dipped in some neutral cleanser diluted five or six  
times with water, and wrung out well, and then wipe  
again with a dry cloth. Do not use furniture wax or  
cleaners.  
Never use thinners, benzine, insecticide sprays or  
other chemicals on or near this unit, since these will  
corrode the surfaces.  
Handle the power cord by the plug. Do not pull out the  
plug by tugging the cord and never touch the power cord  
when your hands are wet as this could cause a short  
circuit or electric shock. Do not place the unit, a piece of  
furniture, etc., on the power cord, or pinch the cord.  
Never make a knot in the cord or tie it with other cords.  
The power cords should be routed such that they are not  
likely to be stepped on. A damaged power cord can  
cause a fire or give you an electrical shock. Check the  
power cord once in a while. When you find it damaged,  
ask your nearest PIONEER authorized service center or  
your dealer for a replacement.  
For Assistance With Basic Set-up, Operation, or Trouble  
Shooting, You May Contact Our Customer Service  
Hotline at 1(800)421-1404(USA ONLY)  
Published by Pioneer Electronic Corporation.  
Copyright © 1999 Pioneer Electronic Corporation.  
All rights reserved.  
PIONEER ELECTRONIC CORPORATION 4-1, Meguro 1-Chome, Meguro-ku, Tokyo 153-8654, Japan  
PIONEER ELECTRONICS [USA] INC. P.O. BOX 1540, Long Beach, California 90801-1540  
PIONEER ELECTRONICS OF CANADA, INC. 300 Allstate Parkway, Markham, Ontario L3R OP2, Canada  
PIONEER ELECTRONIC [EUROPE] N.V. Haven 1087, Keetberglaan 1, 9120 Melsele, Belgium TEL: 03/570.05.11  
PIONEER ELECTRONICS AUSTRALIA PTY. LTD. 178-184 Boundary Road, Braeside, Victoria 3195, Australia, TEL: 03-9586-6300  
PIONEER ELECTRONICS DE MEXICO S.A. DE C.V. San Lorenzo Num 1009 3er piso Desp. 302 Col. Del Valle, Mexico D.F. C.P. 03100 TEL: 5-688-52-90  
<99B00ZZ0J00>  
Printed in  
<ARB7192-A>  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Peavey Guitar G BASS User Manual
Peavey Stereo Amplifier PA 6A User Manual
Pelco Security Camera C1973M B User Manual
Philips Mouse MWK122 User Manual
Philips Portable CD Player AX5100 00 User Manual
Philips Surge Protector SPP1188WA User Manual
Philips Telephone 6825 User Manual
Poulan Snow Blower PP927ESA User Manual
ProForm Elliptical Trainer dtl44941 User Manual
Psion Teklogix Network Cables 32M 64M User Manual