Pioneer Mixer DJ Mixer User Manual

DJ MIXER  
DJM-900SRT  
DJM-900SRT Serato DJ Edition  
The Pioneer DJ support site shown above offers FAQs, information on software and various other types of  
information and services to allow you to use your product in greater comfort.  
For the latest version of the Serato DJ software, access Serato.com and download the software from there.  
Quick Start Guide – Serato DJ Edition  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Launching the Serato DJ software  
Before installing the Serato DJ software  
Installing the Serato DJ software  
Serato DJ is a DJ software application by Serato. DJ performances are possible by  
connecting the computer on which this software is installed to this unit.  
!
!
The user is responsible for preparing the computer, network devices and other  
elements of the Internet usage environment required for a connection to the  
Internet.  
For details on operating the Serato DJ software, see the Serato DJ software  
manual.  
For the Serato DJ software manual and information on the latest version of the  
Serato DJ software, see [Software Info] under [DJM-900SRT] on the Pioneer  
DJ support site below.  
Installation Procedure (Windows)  
Do not connect this unit and the computer until installation is completed.  
!
!
Log on as the user which was set as the computer’s administrator before  
installing.  
If any other programs are running on the computer, quit them.  
1 Insert the CD-ROM into the computer’s CD drive.  
The CD-ROM menu is displayed.  
!
If the CD-ROM menu does not appear when the CD-ROM is inserted, open the  
CD drive from [Computer (or My Computer)] in the [Start] menu, then double-  
click the [CD_menu.exe] icon.  
Cautions on Installation  
!
!
!
!
Before installing the Serato DJ software, turn this unit’s power switch off and  
disconnect the USB cable connecting this unit to the computer.  
If installation of the Serato DJ software is interrupted, follow the procedure  
below to start installation over from the beginning.  
Before installing the Serato DJ software, quit all other programs that are running  
on the computer.  
2 When the CD-ROM’s menu appears, select [Download  
Serato DJ Software.], then click [Start].  
3 “An internet environment is required to access the site.  
Connected to the internet?” is displayed. Click [Yes].  
The web browser is launched and the Pioneer DJ support site is displayed.  
The driver software is compatible with the following OSs.  
Minimum operating environment  
4 Click [Software Info] under [DJM-900SRT] on the Pioneer DJ  
Supported operating systems  
CPU and required memory  
support site.  
®
[Serato DJ Support Information] is displayed.  
Intel processor, Core2 Duo 2.0 GHz or better  
32-bit version  
1 GB or more of RAM  
Mac OS X: 10.6.8, 10.7.5  
and 10.8  
5 Click the link to the Serato DJ download page.  
The Serato DJ download page is displayed.  
®
Intel processor, Core2 Duo 2.4 GHz or better  
64-bit version  
32-bit version  
64-bit version  
4 GB or more of RAM  
®
6 Log in to your “Serato.com” user account.  
Intel processor, Core2 Duo 2.0 GHz or better  
!
If you have already registered a user account on “Serato.com”, input the regis-  
tered e-mail address and password to log in at “Serato.com”, then proceed to the  
Serato DJ software download page.  
2 GB or more of RAM  
Windows: Windows 7  
®
Intel processor, Core2 Duo 2.4 GHz or better  
4 GB or more of RAM  
Proceed to step 8.  
!
If you have not completed registering your user account, do so following the  
procedure below.  
Others  
Following the instructions on the screen, input your e-mail address and the  
password you want to set, then select the region in which you live.  
If you check [E-mail me Serato newsletters], newsletters providing the  
latest information on Serato products will be sent from Serato.  
Once user account registration is completed, you will receive an e-mail at the  
e-mail address you have input. Check the contents of the e-mail sent from  
“Serato.com”.  
Be careful not to forget the e-mail address and password specified when you  
performed user registration. They will be required for updating the software.  
The personal information input when registering a new user account may be col-  
lected, processed and used based on the privacy policy on the Serato website.  
A USB 2.0 port is required to connect the computer with this  
unit.  
USB port  
Display resolution  
Internet connection  
Resolution of 1 280 x 720 or greater  
An Internet connection is required for registering the “Serato.  
com” user account and downloading the software.  
!
For the latest information on the required operating environment and compatibility as well as  
to acquire the latest operating system, refer to “Software Info” under “DJM-900SRT” on the  
Pioneer DJ support site below.  
Operation is not guaranteed on all computers, even if all the required operating environment  
conditions indicated here are fulfilled.  
Depending on the computer’s power-saving settings, etc., the CPU and hard disk may not  
provide sufficient processing capabilities. For notebook computers in particular, make sure  
the computer is in the proper conditions to provide constant high performance (for example  
by keeping the AC power connected) when using Serato DJ.  
!
!
!
!
7 Click the link in the e-mail message sent from “Serato.com”.  
Proceed to the Serato DJ software download page.  
!
Use of the Internet requires a separate contract with a provider offering Internet services and  
payment of provider fees.  
8 Download the Serato DJ software from the download  
page.  
Unzip the downloaded file, then double-click the unzipped file to launch the installer.  
9 Read the terms of the license agreement carefully, and if  
you agree, select [I agree to the license terms and conditions],  
then click [Install].  
!
If you do not agree to the contents of the license agreement, click [Close] to  
cancel installation.  
En  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installation begins.  
10Read the terms of the license agreement carefully, and if  
you agree, click [Agree].  
The message of successful installation appears once installation is completed.  
10Click [Close] to quit the Serato DJ installer.  
!
If you do not agree to the contents of the usage agreement, click [Disagree]  
to cancel installation.  
11If the following screen appears, drag and drop the [Serato  
DJ] icon on the [Applications] folder icon.  
Installation procedure (Mac OS X)  
Do not connect this unit and the computer until installation is completed.  
!
If any other programs are running on the computer, quit them.  
1 Insert the CD-ROM into the computer’s CD drive.  
The CD-ROM menu is displayed.  
!
Double-click the CD icon on the desktop when folders are not displayed after a  
CD-ROM has been loaded.  
2 Double-click [CD_menu.app].  
Launching the Serato DJ software  
3 Select [Download Serato DJ Software.] from the CD-ROM’s  
menu, then click [Start].  
1 Turn on this unit’s power.  
4 “An internet environment is required to access the site.  
Connected to the internet?” is displayed. Click [Yes].  
The web browser is launched and the Pioneer DJ support site is displayed.  
2 Connect this unit to your computer via a USB cable.  
3 Launch the Serato DJ software.  
!
For Windows  
5 Click [Software Info] under [DJM-900SRT] on the Pioneer DJ  
support site.  
[Serato DJ Support Information] is displayed.  
From the Windows [Start] menu, click the [Serato DJ] icon under [All  
Programs] > [Serato] > [Serato DJ].  
!
!
For Mac OS X  
6 Click the link to the Serato DJ download page.  
In Finder, open the [Applications] folder, then click the [Serato DJ] icon.  
The Serato DJ download page is displayed.  
Computer screen when launching the Serato DJ software  
This is the screen displayed when the DJM-900SRT and computer are con-  
nected, before the driver is installed.  
When Serato DJ is launched the first time, an [BUY/ACTIVATE] icon may be  
displayed in the license panel, but there is no need for DJM-900SRT users to  
activate the software or purchase the license.  
7 Log in to your “Serato.com” user account.  
!
If you have already registered a user account on “Serato.com”, input the reg-  
istered e-mail address and password to log in at “Serato.com”, then proceed  
to the Serato DJ software download page.  
Proceed to step 9.  
!
If you have not completed registering your user account, do so following the  
procedure below.  
Following the instructions on the screen, input your e-mail address and  
the password you want to set, then select the region in which you live.  
If you check [E-mail me Serato newsletters], newsletters providing the  
latest information on Serato products will be sent from Serato.  
Once user account registration is completed, you will receive an e-mail at  
the e-mail address you have input. Check the contents of the e-mail sent  
from “Serato.com”.  
!
!
Be careful not to forget the e-mail address and password specified when you  
performed user registration. They will be required for updating the software.  
The personal information input when registering a new user account may  
be collected, processed and used based on the privacy policy on the Serato  
website.  
8 Click the link in the e-mail message sent from “Serato.com”.  
Proceed to the Serato DJ software download page.  
9 Download the Serato DJ software from the download  
1
page.  
Unzip the downloaded file, then double-click the unzipped file to launch the installer.  
1
License panel  
4
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installing the driver software  
This driver software is a special driver software for inputting and outputting audio  
signals from the computer.  
Cautions on Installation  
!
If installation of the driver software is interrupted, follow the procedure in the  
Installing device driver software” section of this unit’s operating instructions  
to start installation over from the beginning.  
!
!
Before installing the driver software, terminate all other programs running on  
your computer.  
For information on the latest version of the driver software, see [Software Info]  
under [DJM-900SRT] on the Pioneer DJ support site below.  
Installation Procedure  
Click the [INSTALL DRIVER] button on the Serato DJ software  
screen.  
Following the instructions displayed on the screen, install the driver software.  
!
When installing the driver software before connecting the devices, installation is  
performed in a different way.  
For details, see this unit’s operating instructions.  
En  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
Names of parts of the Serato DJ software  
Computer screen when the Serato DJ software and this unit are connected  
This screen is an example of the screen displayed after the driver software is installed, with the computer and this unit connected and tracks loaded in the respective decks.  
1
2
1
3
1 Deck section  
The track information (the name of the loaded track, artist name, BPM, etc.), the overall waveform and other information is displayed here.  
2 Waveform display  
The loaded track’s waveform is displayed here.  
3 Browser section  
Crates in which tracks in the library or sets of multiple tracks are stored are displayed here.  
!
This manual consists mainly of explanations of functions of this unit as hardware. For detailed instructions on operating the Serato DJ software, see the Serato DJ soft-  
ware manual.  
The Serato DJ software manual can be downloaded from the Pioneer DJ support site below.  
See [Software Info] under [DJM-900SRT].  
Computer screen when the Serato DJ software and this unit are connected (setup screen)  
This is the Setup screen displayed when the computer and this unit are connected after installing the driver software.  
1
2
1
1 CALIBRATION DECK  
The Serato DJ software calculates analog signals from the control disc and processes the signals of digital audio files.  
Different signal levels and device statuses can be calculated for each usage environment to make the optimum settings for reading out the control signals.  
2 Utility settings  
Utility settings such as settings affecting the entire system and detailed operation settings can be made here.  
6
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Controlling the Serato DJ software  
The signals played on the Serato DJ software’s decks [DECK1] to [DECK4] are input to  
this unit’s respective channels.  
The combinations of the decks and the respective channels to which the sound is  
input are fixed. These combinations are shown below.  
Before controlling the Serato DJ software  
Correspondence table of Serato DJ software decks and DJM-  
900SRT channels  
Serato DJ software deck  
DECK3  
DECK1  
DECK2  
DECK4  
DJM-900SRT channel  
CH1  
CH2  
CH3  
CH4  
Set the positions of the controls, etc., as shown below.  
Names of controls, etc.  
Position  
Input selector switch  
USB  
MASTER  
TRIM control  
Turned fully counterclockwise  
Center  
CD/ LINE PHONO  
DIGITAL  
CD/ LINE PHONO  
DIGITAL  
CD/ LINE PHONO  
DIGITAL  
CD/ LINE PHONO  
LEVEL  
DIGITAL  
USB  
USB  
USB  
USB  
EQ/ISO (HI, MID, LOW) controls  
COLOR control  
DECK 3  
DECK 1  
DECK 2  
DECK 4  
1
1
1
1
Center  
0
Channel faders  
Moved forward  
TRIM  
TRIM  
TRIM  
TRIM  
7
10  
CROSS FADER ASSIGN (A, THRU, B) selector switch  
MASTER LEVEL control  
[THRU] position  
Turned fully counterclockwise  
OVER  
OVER  
OVER  
OVER  
OVER  
2
2
2
2
10  
7
10  
7
10  
7
10  
7
9
9
9
9
7
HI  
HI  
HI  
HI  
4
4
4
4
4
2
2
2
2
2
1
1
1
1
1
0
0
0
0
0
-
-
-
26  
6
-
-
-
26  
6
-
-
-
26  
6
-
-
-
26  
26  
26  
6
/
/
/
/
/
/
/
/
/
/
/
/
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
1
2
1
2
1
2
1
2
1
2
MID  
MID  
MID  
MID  
EQ /  
EQ /  
ISO  
EQ /  
ISO  
EQ /  
ISO  
3
3
3
3
3
ISO  
5
5
5
5
5
26  
26  
6
26  
26  
6
26  
26  
6
6
7
7
7
7
7
LOW  
LOW  
LOW  
LOW  
10  
15  
24  
10  
15  
24  
10  
15  
24  
10  
15  
24  
10  
15  
24  
dB  
dB  
dB  
dB  
L
dB  
R
6
6
6
6
3
4
3
4
3
4
3
4
BALANCE  
COLOR  
COLOR  
COLOR  
COLOR  
LOW  
HI  
LOW  
HI  
LOW  
HI  
LOW  
HI  
L
R
CUE  
CUE  
CUE  
CUE  
CUE  
MONO STEREO  
10  
9
8
7
6
5
4
3
2
1
0
10  
9
8
7
6
5
4
3
2
1
0
10  
9
8
7
6
5
4
3
2
1
0
BOOTH MONITOR  
0
EQ CURVE  
ISOLATOR EQ  
5
6
5
6
5
6
5
6
CH FADER  
A
THRU  
B
A
THRU  
B
A
THRU  
B
A
THRU  
B
1 Input selector switch  
2 TRIM control  
3 EQ/ISO (HI, MID, LOW) controls  
4 COLOR control  
5 Channel faders  
6 CROSS FADER ASSIGN (A, THRU, B) selector switch  
7 MASTER LEVEL control  
En  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
Here we explain three types of connections for different usage environments.  
!
!
!
When using analog players, proceed to page 8.  
When using DJ players, proceed to page 9.  
When using analog players and DJ players simultaneously, proceed to page 10.  
When using analog players  
Here we explain connections for using the Serato DJ software’s decks [DECK1] and [DECK2] connected to analog players.  
Audio cable  
Audio cable  
Ground wire  
Ground wire  
L
R
L
R
CH 4  
CH 3  
CH 2  
CH 1  
PHONO CD/LINE  
L
PHONO CD/LINE  
L
PHONO CD/LINE  
L
PHONO CD/LINE  
L
RETURN  
L(MONO)  
MIC2  
MIDI OUT  
DIGITAL  
R
R
OFF  
ON  
POWER  
SIGNAL GND  
SIGNAL GND  
R
R
R
R
BOOTH  
TRS  
MASTER1  
R
MASTER2 REC OUT  
SEND  
L(MONO)  
CH2  
CH4  
CH1  
IN  
L
L
L
R
L
Analog player  
Analog player  
MASTER  
OUT  
LINK  
R
R
CH3  
AC IN  
2 HOT  
3 COLD  
1 GND  
DJM-900SRT  
USB cable  
CONTROL VINYL  
CONTROL VINYL  
To amplifier  
To power outlet  
Computer  
1 Connect the analog player that will be controlling [DECK1]  
to the [CH2] [PHONO] terminals, the analog player that will be  
controlling [DECK2] to the [CH3] [PHONO] terminals.  
5 Select [SETUP] on the Serato DJ software’s screen, then  
select [TURNTABLES] at the [Audio] tab in the utility settings.  
2 Connect the ground wires for the respective analog players  
to this unit’s [SIGNAL GND] terminals.  
3 Set the CONTROL VINYLs on the analog players.  
4 Switch the DJM-900SRT’s input.  
Switch the [CH2] and [CH3] input selector switches to [USB].  
Input selector switch  
CD/ LINE PHONO  
DIGITAL  
CD/ LINE PHONO  
DIGITAL  
USB  
DECK  
USB  
DECK  
1
2
TRIM  
TRIM  
POWER  
MIC  
MIC1  
USB  
MASTER  
MIDI  
START  
ON/OFF  
UTILITY  
LFO FORM  
/
STOP  
CD/ LINE PHONO  
CD/ LINE PHONO  
CD/ LINE PHONO  
DIGITAL  
CD/ LINE PHONO  
LEVEL  
DIGITAL  
DIGITAL  
DIGITAL  
USB  
USB  
DECK  
USB  
DECK  
USB  
DECK  
3
1
2
DECK 4-  
WAKE UP  
BEAT EFFECTS  
0
TRIM  
TRIM  
TRIM  
TRIM  
OVER  
OVER  
OVER  
OVER  
OVER  
CH SELECT  
1
2
3
4
10  
7
10  
7
10  
7
10  
7
10  
7
MIC  
MST  
MIC  
1
A
B
9
9
9
9
PARAMETER  
0
0
AUTO  
TAP  
GRID  
BPM  
LEVEL  
HI  
HI  
HI  
HI  
4
4
4
4
4
%
ms  
2
2
2
2
2
MIC  
2
1
1
1
1
1
0
0
0
0
0
-
-
-
26  
/
6
-
-
-
26 /  
6
-
-
-
26 /  
6
-
-
-
26 /  
26 /  
26 /  
6
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
1
2
1
2
1
2
1
2
1
2
HI  
MID  
MID  
MID  
MID  
-
X
PAD  
12  
12  
12  
EQ  
3
EQ /  
3
EQ /  
ISO  
3
EQ /  
ISO  
3
EQ /  
ISO  
3
ISO  
LOW  
5
5
5
5
5
12  
7
26 /  
6
6
7
26 /  
6
6
7
26 /  
6
6
7
6
6
7
LOW  
LOW  
LOW  
LOW  
TALK  
10  
15  
24  
10  
15  
24  
10  
15  
24  
10  
15  
24  
10  
15  
24  
OFF ON OVER  
BEAT  
TAP  
dB  
dB  
dB  
dB  
AUTO  
TAP  
QUAN-  
TIZE  
L
dB  
R
26 /  
26 /  
26 /  
/
BALANCE  
COLOR  
COLOR  
COLOR  
COLOR  
DUB  
GATE/  
COMP  
SPACE  
ECHO  
SOUND COLOR FX  
CUE  
NOISE  
CRUSH  
FILTER  
LOW  
HI  
LOW  
HI  
LOW  
HI  
LOW  
HI  
L
R
FLANGER PHASER  
FILTER ROBOT  
TRANS  
LINK  
CUE  
CUE  
CUE  
CUE  
CUE  
MELODIC  
SLIP ROLL  
ROLL  
REVERB  
SPIRAL  
ECHO  
CUE  
REV ROLL  
MONO STEREO  
DELAY  
MIDI LFO  
SND/RTN  
FADER START  
4
MIC  
CF.A  
1
2
3
4
3
10  
9
8
7
6
5
4
3
2
1
0
10  
9
8
7
6
5
4
3
2
1
0
10  
9
8
7
6
5
4
3
2
1
0
2
1
CF.B  
HEADPHONES  
MONO SPLIT STEREO  
BOOTH MONITOR  
MASTER  
TIME  
MIXING  
0
EQ CURVE  
ISOLATOR EQ  
CUE  
MASTER  
LEVEL/DEPTH  
LEVEL  
CH FADER  
A
THRU  
B
A
THRU  
B
A
THRU  
B
A
THRU B  
MIN  
MAX  
0
CROSS FADER  
ON/ OFF  
CROSS FADER ASSIGN  
PHONES  
A
B
8
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
When using DJ players  
Here we explain connections for using the Serato DJ software’s [DECK1] and [DECK2] connected to DJ players.  
Audio cable  
Audio cable  
L
R
L
R
CH 4  
CH 3  
CH 2  
CH 1  
PHONO CD/LINE  
L
PHONO CD/LINE  
L
PHONO CD/LINE  
L
PHONO CD/LINE  
L
RETURN  
L(MONO)  
MIC2  
MIDI OUT  
DIGITAL  
R
R
OFF  
ON  
POWER  
SIGNAL GND  
SIGNAL GND  
R
R
R
R
BOOTH  
TRS  
MASTER1  
R
MASTER2 REC OUT  
SEND  
L(MONO)  
CH2  
CH4  
CH1  
IN  
L
L
L
R
L
MASTER  
OUT  
LINK  
DJ player  
DJ player  
R
R
CH3  
AC IN  
2 HOT  
3 COLD  
1 GND  
DJM-900SRT  
USB cable  
CONTROL CD  
CONTROL CD  
To amplifier  
To power outlet  
Computer  
1 Connect the DJ player that will be controlling [DECK1]  
to the [CH2] [CD/LINE] terminals, the DJ player that will be  
controlling [DECK2] to the [CH3] [CD/LINE] terminals.  
4 Select [SETUP] on the Serato DJ software’s screen, then  
select [CDJS] at the [Audio] tab in the utility settings.  
2 Load the CONTROL CDs in the DJ players.  
3 Switch the DJM-900SRT’s input.  
Switch the [CH2] and [CH3] input selector switches to [USB].  
Input selector switch  
CD/ LINE PHONO  
DIGITAL  
CD/ LINE PHONO  
DIGITAL  
USB  
DECK  
USB  
DECK  
1
2
TRIM  
TRIM  
POWER  
MIC  
MIC1  
USB  
MASTER  
MIDI  
START  
ON/OFF  
UTILITY  
LFO FORM  
/
STOP  
CD/ LINE PHONO  
CD/ LINE PHONO  
CD/ LINE PHONO  
DIGITAL  
CD/ LINE PHONO  
LEVEL  
DIGITAL  
DIGITAL  
DIGITAL  
USB  
USB  
DECK  
USB  
DECK  
USB  
DECK  
3
1
2
DECK 4-  
WAKE UP  
BEAT EFFECTS  
0
TRIM  
TRIM  
TRIM  
TRIM  
OVER  
OVER  
OVER  
OVER  
OVER  
CH SELECT  
1
2
3
4
10  
7
10  
7
10  
7
10  
7
10  
7
MIC  
MST  
MIC  
1
A
B
9
9
9
9
PARAMETER  
0
0
AUTO  
TAP  
GRID  
BPM  
LEVEL  
HI  
HI  
HI  
HI  
4
4
4
4
4
%
ms  
2
2
2
2
2
MIC  
2
1
1
1
1
1
0
0
0
0
0
-
-
-
26  
/
6
-
-
-
26 /  
6
-
-
-
26 /  
6
-
-
-
26 /  
26 /  
26 /  
6
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
1
2
1
2
1
2
1
2
1
2
HI  
MID  
MID  
MID  
MID  
-
X
PAD  
12  
12  
12  
EQ  
3
EQ /  
3
EQ /  
ISO  
3
EQ /  
ISO  
3
EQ /  
ISO  
3
ISO  
LOW  
5
5
5
5
5
12  
7
26 /  
6
6
7
26 /  
6
6
7
26 /  
6
6
7
6
6
7
LOW  
LOW  
LOW  
LOW  
TALK  
10  
15  
24  
10  
15  
24  
10  
15  
24  
10  
15  
24  
10  
15  
24  
OFF ON OVER  
BEAT  
TAP  
dB  
dB  
dB  
dB  
AUTO  
TAP  
QUAN-  
TIZE  
L
dB  
R
26 /  
26 /  
26 /  
/
BALANCE  
COLOR  
COLOR  
COLOR  
COLOR  
DUB  
GATE/  
COMP  
SPACE  
ECHO  
SOUND COLOR FX  
CUE  
NOISE  
CRUSH  
FILTER  
LOW  
HI  
LOW  
HI  
LOW  
HI  
LOW  
HI  
L
R
FLANGER PHASER  
FILTER ROBOT  
TRANS  
LINK  
CUE  
CUE  
CUE  
CUE  
CUE  
MELODIC  
SLIP ROLL  
ROLL  
REVERB  
SPIRAL  
ECHO  
CUE  
REV ROLL  
MONO STEREO  
DELAY  
MIDI LFO  
SND/RTN  
FADER START  
4
MIC  
CF.A  
1
2
3
4
3
10  
9
8
7
6
5
4
3
2
1
0
10  
9
8
7
6
5
4
3
2
1
0
10  
9
8
7
6
5
4
3
2
1
0
2
1
CF.B  
HEADPHONES  
MONO SPLIT STEREO  
BOOTH MONITOR  
MASTER  
TIME  
MIXING  
0
EQ CURVE  
ISOLATOR EQ  
CUE  
MASTER  
LEVEL/DEPTH  
LEVEL  
CH FADER  
A
THRU  
B
A
THRU  
B
A
THRU  
B
A
THRU B  
MIN  
MAX  
0
CROSS FADER  
ON/ OFF  
CROSS FADER ASSIGN  
PHONES  
A
B
En  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
When using analog players and DJ players simultaneously  
Here we explain connections for using the Serato DJ software’s [DECK1] and  
[DECK2] connected to analog players, the Serato DJ software’s [DECK3] and  
[DECK4] connected to DJ players.  
5 Select the [MIXER OUTPUT] tab in the settings utility, then  
from the pull-down menu corresponding to the channel  
to which the player is connected, select [CH* Control Tone  
PHONO] for [USB3/4] and [USB5/6] for using the analog  
players, [CH* Control Tone CD/LINE] for [USB1/2] and [USB7/8]  
for using the DJ players.  
1 Connect the analog player that will be controlling [DECK1]  
to the [CH2] [PHONO] terminals, the analog player that will be  
controlling [DECK2] to the [CH3] [PHONO] terminals.  
2 Connect the DJ player that will be controlling [DECK3]  
to the [CH1] [CD/LINE] terminals, the DJ player that will be  
controlling [DECK4] to the [CH4] [CD/LINE] terminals.  
3 Switch the DJM-900SRT’s input.  
Switch the input selector switches for channels [CH1] – [CH4] to [USB].  
Input selector switch  
CD/ LINE PHONO  
CD/ LINE PHONO  
DIGITAL  
CD/ LINE PHONO  
DIGITAL  
CD/ LINE PHONO  
DIGITAL  
DIGITAL  
USB  
DECK  
USB  
DECK  
USB  
DECK  
USB  
DECK  
3
1
2
4
TRIM  
TRIM  
TRIM  
TRIM  
POWER  
MIC  
MIC1  
USB  
MASTER  
MIDI  
START  
ON/OFF  
UTILITY  
LFO FORM  
/
STOP  
CD/ LINE PHONO  
DIGITAL  
CD/ LINE PHONO  
CD/ LINE PHONO  
DIGITAL  
CD/ LINE PHONO  
LEVEL  
DIGITAL  
DIGITAL  
USB  
DECK  
USB  
DECK  
USB  
DECK  
USB  
3
1
2
DECK 4-  
WAKE UP  
BEAT EFFECTS  
0
TRIM  
TRIM  
TRIM  
TRIM  
OVER  
OVER  
OVER  
OVER  
OVER  
CH SELECT  
1
2
3
4
10  
7
10  
7
10  
7
10  
7
10  
7
MIC  
MST  
MIC  
MIC  
1
A
B
9
9
9
9
PARAMETER  
0
0
AUTO  
TAP  
GRID  
BPM  
LEVEL  
HI  
HI  
HI  
HI  
4
4
4
4
4
%
ms  
2
2
2
2
2
2
1
1
1
1
1
0
0
0
0
0
-
-
-
26  
6
-
-
-
26  
6
-
-
-
26  
6
-
-
-
26  
6
/
/
/
/
/
/
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
1
2
1
2
1
2
1
2
1
2
HI  
MID  
MID  
MID  
MID  
-
X
PAD  
12  
12  
12  
EQ  
3
EQ /  
3
EQ /  
ISO  
3
EQ /  
ISO  
3
EQ /  
ISO  
3
ISO  
LOW  
5
5
5
5
5
12  
7
26  
26  
6
6
7
26 /  
6
6
7
26 /  
6
6
7
26 /  
6
6
7
LOW  
LOW  
LOW  
LOW  
TALK  
10  
15  
24  
10  
15  
24  
10  
15  
24  
10  
15  
24  
10  
15  
24  
OFF ON OVER  
BEAT  
TAP  
dB  
dB  
dB  
dB  
AUTO  
TAP  
QUAN-  
TIZE  
L
dB  
R
26  
/
26  
/
26  
/
/
BALANCE  
COLOR  
COLOR  
COLOR  
COLOR  
DUB  
GATE/  
COMP  
SPACE  
ECHO  
SOUND COLOR FX  
CUE  
NOISE  
CRUSH  
FILTER  
LOW  
HI  
LOW  
HI  
LOW  
HI  
LOW  
HI  
L
R
FLANGER PHASER  
FILTER ROBOT  
TRANS  
LINK  
CUE  
CUE  
CUE  
CUE  
CUE  
MELODIC  
SLIP ROLL  
ROLL  
REVERB  
SPIRAL  
ECHO  
CUE  
REV ROLL  
MONO STEREO  
DELAY  
MIDI LFO  
SND/RTN  
FADER START  
4
MIC  
CF.A  
1
2
3
4
3
10  
9
8
7
6
5
4
3
2
1
0
10  
9
8
7
6
5
4
3
2
1
0
10  
9
8
7
6
5
4
3
2
1
0
2
1
CF.B  
HEADPHONES  
MONO SPLIT STEREO  
BOOTH MONITOR  
MASTER  
TIME  
MIXING  
0
EQ CURVE  
ISOLATOR EQ  
CUE  
MASTER  
LEVEL/DEPTH  
LEVEL  
CH FADER  
A
THRU  
B
A
THRU  
B
A
THRU  
B
A
THRU B  
MIN  
MAX  
0
CROSS FADER  
ON/ OFF  
CROSS FADER ASSIGN  
PHONES  
A
B
4 Select [SETUP] on the Serato DJ software’s screen, then  
select [CUSTOM] at the [Audio] tab in the utility settings.  
When [CUSTOM] is selected, the DJM-900SRT settings utility is displayed.  
10  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1
2
Checking the control signals  
Press the play button on the connected player and play track 1.  
Green ring appears at [CALIBRATION DECK].  
Check that the innermost ring is close to a true circle.  
1
2
[crates] panel  
[Files] panel  
For details, see the Serato DJ software manual.  
The Serato DJ software manual can be downloaded from the Pioneer DJ support site  
below.  
See [Software Info] under [DJM-900SRT].  
Loading tracks  
1 From the [crates] panel, click [crates], etc., to open [Library].  
Selecting the play mode  
The Serato DJ software provides three play modes that can be selected according to  
2 Select a track from [Library], then drag and drop it to  
[DECK1] to load it.  
your intended purpose.  
[ABS], [REL] and [INT] can be selected on the deck unit.  
Here we explain the procedure with the play mode set to [ABS] as an example.  
Playing tracks  
Here we explain how to output the sound of [DECK1] (CH2) as an example.  
Select [ABS] at the tab on the deck unit.  
!
Set the volume of the devices (power amplifier, powered speakers, etc.) con-  
nected to the [MASTER1] and [MASTER2] terminals to an appropriate level.  
Note that loud sound will be output if the volume is set too high.  
1 Press the play button on the connected player and play  
track 1.  
Play a track in the Serato DJ software.  
2 Turn the [TRIM] control.  
Turn the [TRIM] control to adjust so that the channel level indicator’s orange indica-  
tor lights at the peak level.  
3 Move the channel fader away from you.  
4 Turn the [MASTER LEVEL] control to adjust the audio level  
of the speakers.  
Adjust the sound level output from the [MASTER1] and [MASTER2] terminals to an  
For a description of the respective play modes, see the Serato DJ software manual.  
The Serato DJ software manual can be downloaded from the Pioneer DJ support site  
below.  
appropriate level.  
See [Software Info] under [DJM-900SRT].  
Note  
This unit and the Serato DJ software include a variety of functions enabling individu-  
alistic DJ performances. For details on the respective functions, see the operating  
instructions and the Serato DJ software manual.  
Importing or loading tracks  
!
This unit’s operating instructions can be downloaded from the Pioneer DJ  
support site. For details, see “Acquiring the manual” in this unit’s operating  
instructions.  
Importing tracks  
Here we explain a typical method of operation for importing tracks.  
!
The Serato DJ software manual can be downloaded from the Pioneer DJ support  
site below.  
See [Software Info] under [DJM-900SRT].  
!
!
There are various ways to import tracks with the Serato DJ software. For details,  
see the Serato DJ software manual.  
If you are already using Serato DJ software (Scratch Live, ITCH or Serato DJ  
Intro) and have already created track libraries, the track libraries you have previ-  
ously created can be used as such.  
Quitting the system  
1 Click the [Files] key on the Serato DJ software screen to  
open the [Files] panel.  
The contents of your computer or the peripheral connected to the computer are  
displayed in the [Files] panel.  
1 Quit [Serato DJ].  
When the software is closed, a message for confirming that you want to close it  
appears on the computer’s screen. Click [Yes] to close.  
2 Click the folder on the [Files] panel containing the tracks  
you want to add to the library to select it.  
2 Press the [POWER] button on this unit’s rear panel to turn  
the power off.  
3 On the Serato DJ software screen, drag and drop the  
selected folder to the crates panel.  
A crate is created and the tracks are added to the library.  
3 Disconnect the USB cable from your computer.  
The specifications and design of this product are subject to change without  
notice.  
© 2013 PIONEER CORPORATION. All rights reserved.  
PIONEER CORPORATION  
1-1, Shin-ogura, Saiwai-ku, Kawasaki-shi, Kanagawa 212-0031, Japan  
<DRI1157-A>  
En  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Philips CRT Television 14MT2136 User Manual
Philips Flat Panel Television 15PT2967 05 User Manual
Philips Oxygen Equipment AS 650 User Manual
Philips Surge Protector SPP2304WC User Manual
Philips TV VCR Combo 14PV100 User Manual
Pioneer TV Cables VSX D811S User Manual
Planet Technology Network Router PL 201 KIT User Manual
Poulan Cultivator 530088051 User Manual
PQI Network Card DiskOnModule User Manual
PYLE Audio Car Stereo System PLH9SP User Manual