AUDIO/VIDEO MULTI-CHANNEL
RECEIVER
VSX-D711
VSX-D811S
Operating Instructions
XRB3013A.01.06
1
01.12.12, 4:40 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Manufactured under license from Dolby Laboratories.
“Dolby”, “Pro Logic II” and the double D symbol 2
are trademarks of Dolby Laboratorories.
"DTS", “ES”, and "DTS Digital Surround" are trademarks
of Digital Theater Systems, Inc.
XRB3013A.01.06
3
01.12.12, 4:41 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Co n t e n t s
1 Be fo re yo u st a rt
4 Co n t ro ls a n d d isp la ys
Checking what’s in the box ...............................6
Installing the receiver ........................................6
Making cable connections ................................6
Loading the batteries .........................................6
Operating range of remote control unit ...........6
Front panel ........................................................26
Display ............................................................. 27
Remote control ................................................ 29
5 Pla yin g so u rce s
Introduction to Sound Modes ........................ 32
Stereo/Direct ...............................................32
Standard mode .......................................... 32
Advanced Surround modes .......................33
Choosing the input signal .............................. 34
Listening to multi-channel playback ..............34
Using Stereo/Direct .........................................35
Using Advanced Surround ............................. 35
Using Loudness and Midnight listening ........36
Using the tone controls .................................. 36
Playing other sources ..................................... 36
Selecting the multi-channel analog inputs ...37
2 5 m in u t e g u id e
Introduction to home theater ............................7
Listening to Surround Sound ............................8
Using the Quick Setup ....................................12
3 Co n n e ct in g u p
Audio/Video cords ........................................... 13
S-video cables ...................................................13
Component video cords ................................. 13
Digital audio coaxial cords/
Optical cables ...................................................13
Connecting digital components .................... 14
Connecting audio components ......................16
Connecting DVD 5.1 channel components ...17
Connecting video components .......................18
Connecting to the front panel
6 Se t t in g u p yo u r re ce ive r
Choosing your receiver setup ........................ 38
Speaker setting .......................................... 39
Surround back speaker
video terminal ............................................ 18
Connecting antennas ..................................... 19
FM wire antenna .........................................19
AM loop antenna ....................................... 19
Antenna snap connectors ........................ 19
Using external antennas ............................19
To improve FM reception ............................19
To improve AM reception ...........................19
Connecting the speakers (VSX-D711) ............. 20
Connecting the speakers (VSX-D811S) ........... 21
A and B speaker systems ......................... 22
Speaker terminals ..................................... 22
Hints on speaker placement .................... 22
Connecting additional amplifiers
setting (VSX-D811S only) ............................ 40
6.1 channel setting (VSX-D811S only) ....... 40
Subwoofer setting ..................................... 40
Crossover frequency setting ......................40
LFE attenuator setting ................................41
Front speaker distance setting ..................41
Center speaker distance setting .............. 41
Surround speaker distance setting .......... 41
Surround back speaker distance
setting (VSX-D811S only) ............................ 42
Dynamic range control setting ..................42
Dual mono setting ..................................... 42
Component video input settings .............. 42
Surround back channel input
(VSX-D811S only) ............................................ 24
AC outlet .......................................................... 25
Operating other Pioneer components .......... 25
setting (VSX-D811S only) ............................ 43
Coaxial digital input settings .................... 43
Optical digital input settings .................... 43
XRB3013A.01.06
4
01.12.12, 4:41 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the relative volume level
of each channel............................................... 44
7 Usin g t h e t u n e r
Listening to the radio ...................................... 45
Improving FM stereo sound .......................45
Tuning directly to a station ........................ 45
Saving station presets .....................................46
Naming station presets .................................. 47
Listening to station presets ............................ 47
8 Ma kin g a re co rd in g
Making an audio or a video recording .......... 48
Monitoring your recording ........................ 48
9
Co n t ro llin g t h e re st o f yo u r syst e m
Setting the remote to control
other components ........................................... 49
Selecting preset codes directly .......................49
Searching for preset codes ............................ 50
Programming signals from other
remote controls (VSX-D811S only) .................. 50
Erasing one of the remote control
button settings (VSX-D811S only) ................... 51
Clearing all the remote control settings ........51
Direct function ................................................ 52
Confirming preset codes .................................52
Controls for TVs ............................................... 53
Controls for other components .......................54
Preset Code List ...............................................56
10 Ad d it io n a l in fo rm a t io n
Troubleshooting ............................................... 68
Specifications ...................................................70
XRB3013A.01.06
5
01.12.12, 4:41 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
01
Be fo re yo u st a rt
Ch e ckin g w h a t ’s in t h e b o x
Please check that you've received the following
supplied accessories:
Incorrect use of batteries may result in such
hazards as leakage and bursting. Observe the
following precautions:
•
•
•
•
•
AM loop antenna
FM wire antenna
•
•
Never use new and old batteries together.
Dry cell batteries x 2 (AA size IEC R6P)
Remote control
Insert the plus and minus sides of the
batteries properly according to the marks
in the battery case.
These operating instructions
•
•
Batteries with the same shape may have
different voltages. Do not use different
batteries together.
In st a llin g t h e re ce ive r
Please note the following points:
When disposing of used batteries, please
comply with governmental regulations or
environmental public instruction’s rules
that apply in your country or area.
•
Do not place objects
directly on top of this
unit. This prevents
proper heat dispersal.
•
When installing on a
Op e ra t in g ra n g e o f re m o t e
co n t ro l u n it
The remote control may not work properly if:
rack, shelf, etc., be sure to leave more than
8 inches (20 cm.) of space above the
receiver.
•
•
•
•
There are obstacles between the remote
control and the receiver's remote sensor.
Ma kin g ca b le co n n e ct io n s
Direct sunlight or fluorescent light is
shining onto the remote sensor.
Make sure not to
bend the cables
over the top of this
unit (as shown in
the illustration). If
this happens, the
magnetic field
The receiver is located near a device that is
emitting infrared rays.
The receiver is operated simultaneously
with another infrared remote control unit.
produced by the transform-
ers in this unit may cause a humming
noise from the speakers.
Lo a d in g t h e b a t t e rie s
30
30
23ft (7m )
Dry cell batteries x 2 (AA size IEC R6P)
6
En
XRB3013A.01.06
6
01.12.12, 4:41 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
5 m in u t e g u id e
02
In t ro d u ct io n t o h o m e t h e a t e r
You are probably used to using stereo equipment to listen to music, but may not be used to home
theater systems that give you many more options (such as surround sound) when listening to
soundtracks.
Home theater refers to the use of multiple audio tracks to create a surround sound effect, making
you feel like you're in the middle of the action or concert. The surround sound you get from a home
theater system depends not only on the speakers you have set up in your room, but also on the
source and the sound settings of the receiver.
DVD-Video has become the basic source material for home theater due to its size, quality, and ease
of use. Depending on the DVD, you can have up to seven different audio tracks coming from one
disc, all of them being sent to different speakers in your system. This is what creates a surround
sound effect and gives you the feeling of ‘being there’.
This receiver will automatically decode Dolby Digital, DTS, or Dolby Surround DVD-Video discs,
according to your speaker setup. In most cases, you won’t have to make changes for realistic
surround sound, but other possibilities (like listening to a CD with multi-channel surround sound)
are explained in Playing sources, starting on page 32.
7
En
XRB3013A.07.12
7
01.12.12, 4:41 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
02
5 m in u t e g u id e
List e n in g t o Su rro u n d So u n d
This receiver was designed with the easiest possible setup in mind, so with the following quick
setup guide, you should have your system hooked up for surround sound in no time at all. In most
cases, you can simply leave the receiver in the default settings.
1
Hook up your DVD player.
For surround sound, you’ll want to hook up using a digital connection from the DVD player to the
receiver. You can do this with either a coaxial, or an optical connection (you don’t need to do both). If
you hook up using an optical cable, you should refer to Optical digital input setting on page 43 to
assign the optical input to DVD.
Use a video cord to connect the video output on your DVD to the receiver using the jacks shown
below.
2
Hook up your TV.
Use a video cord to connect your receiver to the TV using the jacks as shown below.
Optical cable
Note: If you hook up
using a optical cable,
see Optical input
Coaxial cable
setting on page 43 to
assign the optical
input to DVD.
Video cord
DIGITAL IN
ASSIGNABLE
OPT
)
COAX
(
)
¥
(
DVD/LD
COAX
T V / S A T
¥
This receiver*
IN
DVD
LD
FRONT
DIGITAL OUT
VIDEO OUT
DIGITAL IN
OPT
OPT
/
A
S
S
I
G
N
A
B
L
E
UT
W.
COMPONENT
VIDEO
A
S
S
I
G
N
A
B
L
E
(
D
V
D
/
L
D
)
I
N
¥
(
)
¥
(
)
ø
(
)
¥
D
V
D
/
L
D
C
D
T
V
/
SAT
DIGITAL
OUT
S
D
V
D
MONITOR OUT
S
-
VIDEO
5.1CH
MONITOR
OUT
REC INPUT
IN
CD-R
/
TAPE
L
Y
P
B
PR
(
T
V
/
S
A
T
)
I
N
ø
OUT
VIDEO
/
MD
VCR
DVR
SURROUND
FRONT
R
L
R
L
OUT
IN
IN
IN
OUT
DVD
LD
FRONT
MONITOR
OUT
T
V
/
IN
D
V
D
B
IN
PREOUT
CENTER
D
V
D P
L
A
Y
E
R
5.1CH
REC INPUT
SUB
WOOFER
MONITOR
OUT
DV
LD
CD-R
TAPE
IN
/
Î
PREOUT
4
1
¡
¢
7
8
STANDBY/ON
/
MD
0
3
CONTR
OUT
IN
PLAY
R
AUDIO
L
SUB
WOOFER
DVD player
PREOUT
* The illustration
shows the VSX-
D711, but DVD
connections for
the VSX-D811S
are the same.
VIDEO IN
Video cord
TV
8
En
XRB3013A.07.12
8
01.12.12, 4:41 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
5 m in u t e g u id e
02
3
Connect your speakers.
A complete setup of speakers is shown here (six speakers (including the subwoofer) for the VSX-
D711, and eight (also including the subwoofer) for the VSX-D811S), but everyone’s home setup will
vary. Simply connect the speakers you have in the manner shown below. The receiver will work with
just two stereo speakers (the front speakers in the diagram) but using at least three speakers is
recommended, and a complete setup is best.
Make sure you connect the speaker on the right to the right terminal and the speaker on the left to
the left terminal. Also make sure the positive and negative (+/–) terminals on the receiver match
those on the speakers.
•
•
Use speakers with a nominal impedance of 8 Ω to 16 Ω.
If you’re not using a subwoofer, change the front speaker setting (see Speaker setting on page
39) to large
•
When using the speaker on your TV as the center speaker (C), connect the CENTER PREOUT
jack on this unit to the audio input jack on your TV. In this case the center speaker shown is
unnecessary.
Front Speakers
Surround Speakers
Center Speaker
C
L
R
SL
SR
Use speakers with a
nominal impedance
of 8 Ω to 16 Ω.
DIGITAL IN
COAX
OPT
OPT
ASSIGNABLE
AUX
CD
DVD 5.1CH INPUT
IN
CENTER
SUB W.
COMPONE
VIDEO
ASSIGNABLE
(
D
V
D
/
LD)
¥
(
)
¥
(
)
ø
(
¥
DVD/ LD
CD
T
V
/
SA
DIGITAL
OUT
MONITR OUT
ANTENNA
AM
S
-
VIDEO
MONITOR
OUT
VCR
DVR
/
R
SURROUND
L
LOOP
Y
P
B
P
R
Y
P
B
PR
(T
V
/
S
A
T
)
IN
ø
FM
OUT
IN
IN
IN
UNBAL
VIDEO
VCR
DVR
/
75
‰
FROT
CENTER
SURROUND
FRONT
IN
IN
R
L
R
L
R
L
S
P
E
A
K
E
R
S
TV
/
OUT
SAT
IN
DVD
MONITOR
OUT
AC OUTLET
T
V
/
/
LD
IN
IN
SAT
FRONT
D
V
D
A
B
PREOUT
CENTER
5.1CH
REC INPUT
SUB
WOOFER
DVD
LD
/
IN
CD-R
TAPE
/
PREOUT
/
MD
CONTROL
OUT
IN
PLAY
R
AUDIO
L
VSX-D711
TV
INPUT
Be sure to complete all
connections before
connecting this unit to
the AC power source.
Powered subwoofer
9
En
XRB3013A.07.12
9
01.12.12, 4:41 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
02
5 m in u t e g u id e
Front Speakers
Surround Speakers
SL SR
Surround back speakers
SBL SBR
Center Speaker
C
L
R
DIGITAL IN
COAX
(CD)
OP
OPT
ASSIGNABLE
AUX
CD
DVD 7.1CH INPUT
IN
CENTER
SUB W.
PREOUT
SURROUND
BACK
COMPONENT
VIDEO
A
S
S
I
G
N
A
B
L
E
(
D
V
D
/
LD) IN
¥
L
L
(
)
¥
ø
(
D-R/
DVD/ LD
T
V
/
DIGITAL
OUT
¥
Aø
MONITOR OUT
ANTENNA
S
-
VIDEO
)
M
D
MONITOR
OUT
SURROUND
L
R
VCR
DVR
/
AM
SURROUND
LOOP
BACK
P
B
P
R
Y
P
B
P
R
R
R
R
IN
L
(T
V
/
S
A
T
)
IN
ø
FRON
SURROUND
CENTER
FM
OUT
IN
IN
IN
UNBAL
VIDEO
VCR
DVR
/
75
Ω
FROT
CENTER
SURROUND BACK
SURROUND
FRONT
R
L
R
L
R
L
R
L
S
P
E
A
K
E
R
S
TV
/
OUT
SAT
IN
AC OUTLET
IN
DVD
MONITOR
OUT
T
V
/
/
LD
IN
IN
SAT
FRONT
D
V
D
A
B
5.1CH
REC INPUT
SUB
WOOFER
DVD
LD
/
IN
CD-R
TAPE
/
PREOUT
/
MD
CONTROL
OUT
IN
PLAY
R
AUDIO
L
VSX-D811S
Subwoofer
(passive)
TV
INPUT
Be sure to complete all
connections before
Powered subwoofer
connecting this unit to
the AC power source.
VSX-D811S only
Surround back
speaker (or
subwoofer)
•
If you are using only one surround back
speaker, connect the positive wire to the
right channel (+) terminal, and the
negative wire to the left channel (–)
terminal (shown at right).
VSX-D811S
•
If you select subwoofer (SB SUBWF) in the
Surround back speaker setting (see page
40) you can hook up a subwoofer instead
of speakers to the surround back speaker
terminals. Connect the wires just as above
(and as shown at right), connecting the
positive wire to the right channel (+)
terminal, and the negative wire to the left
channel (–) terminal.
SURROUND BACK
R
L
10
En
XRB3013A.07.12
10
01.12.12, 4:41 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
5 m in u t e g u id e
02
4
Plug in the receiver and sw itch it on, follow ed by your DVD player, your subw oofer and
the TV.
Make sure you’ve set the video input on your TV to this receiver. Check the manual that came with
the TV if you don’t know how to do this.
Also make sure that DVD/LD is showing in the receiver’s display, indicating that the DVD input is
selected. If it isn’t, press DVD/LD on the remote control to set the receiver to the DVD input.
5
Press QUICK SETUP on the front panel to specify your speaker setup and your room
size.
Use the MULTI JOG/INPUT SELECTOR dial to select and ENTER to confirm your selection. See
Using the Quick Setup on the next page if you’re unsure about the settings.
6
Play a DVD, and adjust the volume to your liking.
There are several other sound options you can select. See pages 32–33 for more on this. See also
Choosing your receiver setup on page 38–43 for more setup options.
Depending on your DVD player or source discs, you may only get digital 2 channel stereo and
analog sound. In this case, the listening mode must be set to Standard (it should already be
set—see page 34 if you need to do this) if you want multi-channel surround sound.
11
En
XRB3013A.07.12
11
01.12.12, 4:41 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
02
5 m in u t e g u id e
Usin g t h e Qu ick Se t u p
You can use the Quick Setup to get your system
up and running with just a few button presses.
The receiver automatically makes the necessary
settings after you have selected your speaker
setup and room size. If you want to make more
specific settings, refer to Choosing your receiver
setup on pages 38–43. Use the front panel
controls for the steps below.
Check the table below to find the speaker
setup that corresponds with your system.
Fro n t
Ce n t e r Su rro u n d Su rro u n d Su b
Sp e a ke rs Sp e a ke r Sp e a ke rs Ba ck Sp . Wo o fe r
3.0 ch
3.1 ch
4.0 ch
4.1 ch
5.0 ch
5.1 ch
6.0 ch
6.1 ch
7.0 ch
7.1 ch
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
AUDIO/VIDEO MULTI-CHANNEL RECEIVER N∫m-Û≥,,
INPUT
SELECTOR
MULTI JOG
ENTER
√
√
√
√
√
√
MASTER VOLUME
ADVANCED
SURROUND
STEREO/
DIRECT
SIGNAL
SELECT
MIDNIGHT/
LOUDNESS SPEAKERS
*
*
*
*
(1 speaker)
(1 speaker)
(2 speakers)
(2 speakers)
MONITOR
TONE
QUICK SETUP
DOWN
UP
MULTI JOG
LISTENING MODE
FL DIMMER
VIDEO INPUT
DIGITAL IN
S-VIDEO
VIDEO
L
AUDIO
R
R
* VSX-D811S only
Press ENTER.
4
The display prompts you to select your room
size.
1
If the receiver is off, press STANDBY/
ON to turn the pow er on.
The STANDBY indicator goes out.
5
Use the the MULTI JOG/INPUT
SELECTOR dial to choose your room size.
Depending on the distance of your speakers
from the listening position, choose between
Small, Medium, or Large (see table below).
2
Press QUICK SETUP.
The display prompts you to select your speaker
setup.
3
Use the MULTI JOG/INPUT SELECTOR
dial to choose your speaker setup.
Cycle between the following choices:
S
M
L
Fro n t
12 ft. 12 ft. 12 ft.
Ce n t e r
10 ft. 10 ft.
10 ft.
9 ft.
7 ft.
3.0ch
3.1ch
4.0ch
4.1ch
Su rro u n d
Su rro u n d Ba ck*
6 ft.
3 ft.
7 ft.
5 ft.
7.1ch*
* VSX-D811S only
5.0ch
5.1ch
7.0ch*
6
Press ENTER to confirm your setup.
6.1ch*
6.0ch*
The display shows the speaker setup and room
size that you have selected.
* VSX-D811S only
12
En
XRB3013A.07.12
12
01.12.12, 4:41 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Co n n e ct in g u p
03
Before making or changing any connections, switch off the power and disconnect the power cord from
the AC outlet.
Au d io /Vid e o co rd s
Use audio/video cords (not supplied) to connect
the audio/video components and a video cord
to connect the monitor TV.
Co m p o n e n t vid e o co rd s
Use component video cords to get the best
possible color reproduction of your video
source. The color signal of the TV is divided into
the luminance (Y) signal and the color (PB and
PR) signals and then output. In this way,
interference between the signals is avoided.
Connect from the component video jacks on the
rear of the receiver to the component video
jacks on the video component you are hooking
up.
Connect red plugs to R (right), white plugs to L
(left), and the yellow plugs to VIDEO.
Be sure to insert completely.
R
L
VIDEO
Y
PB
Green
PR
S-vid e o ca b le s
Use S-video cables (not supplied) to get clearer
picture reproduction than regular video cords.
Blue
Red
Connect from an S-video jack on the rear of the
receiver to an S-video jack on the video
component you are hooking up.
Dig it a l a u d io co a xia l co rd s/
Op t ica l ca b le s
Commercially available digital audio coaxial
cords (standard video cords can also be used)
or optical cables (not supplied) are used to
connect digital components to this receiver.
Be sure to insert completely.
S VIDEO
Be sure to insert completely.
Optical cable
Digital audio coaxial cord
(or standard video cord)
13
En
XRB3013A.13.25
13
01.12.12, 4:42 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
03
Co n n e ct in g u p
Co n n e ct in g d ig it a l co m p o n e n t s
The easiest way to hook up this receiver for surround sound is to use a digital input. You can do this
by either coaxial or optical connections (you do not need to do both). The quality of these two types
of connections is the same but since some digital components only have one type of digital
terminal, it is a matter of matching like with like (for example, the coaxial output from the
component to coaxial input on the receiver). The VSX-D711 has three digital inputs on the rear panel
(two coaxial inputs and a optical input) and the VSX-D811S has four (two coaxial inputs and two
optical inputs). Connect your digital components to the rear panel as shown below. See page 18 to
connect the front panel optical input on the VSX-D811S.
There is one digital output jack which is marked DIGITAL OUT. If you connect this to the optical
input on a digital recorder (currently these include MD, DAT and CD-R) you can make direct digital
recordings with this unit.
When connecting your equipment, always make sure the power is turned off and the power cord is
disconnected from the AC outlet.
The arrows indicate the direction of the audio signal.
VSX-D711
DIGITAL
CD recorder
IN
DIGITAL IN
COAX
OPT
OPT
ASSIGNABLE
AUX
CD
DVD 5.1CH INPUT
CENTER SUB W.
IN
COMPONENT
VIDEO
ASSIGNABLE
(
)
¥
(
)
ø
)
¥
DVD/ LD
CD
T
V
/
SAT
DIGITAL
OUT
MONITOR OUT
ANTENNA
IN
S
-
VIDEO
MONITOR
OUT
VCR
DVR
/
AM
R
SURROUND
L
LOOP
Y
P
B
P
R
Y
P
B
(
)
T
V
/
SAT IN
ø
FM
OUT
IN
IN
IN
DIGITAL
UNBAL
VIDEO
Satellite
tuner
VCR
DVR
/
75
‰
FRONT
CENTER
IN
IN
R
L
S
P
E
A
K
E
R
S
OUT
TV
/
OUT
SAT
IN
DVD
MOTOR
OUT
T
V
/
/
LD
IN
IN
SAT
FRONT
D
V
D
A
PREOUT
CENTER
5.1CH
REC INPUT
SUB
WOFER
DVD
LD
/
IN
CD-R
TAPE
/
PREUT
/
MD
CONTROL
DIGITAL OUT
COAX
UT
IN
PLAY
R
AUDIO
L
CD player
DIGITAL OUT
COAX
DVD player
14
En
XRB3013A.13.25
14
01.12.12, 4:42 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Co n n e ct in g u p
03
DIGITAL
OUT
Satellite
tuner
DIGITAL
OUT
DIGITAL
IN
CD recorder
VSX-D811S
DIGITAL IN
COAX
OPT
OPT
ASSIGNABLE
AUX
DVD 7.1CH INPUT
CENTER SUB W.
IN
COMPONENT
VIDEO
ASSIGNABLE
(
(
)
¥
(
)
ø
(
CD
(
/
/
DVD/ LD
T
V
/
CD-R/
DIGITAL
OUT
¥
TAPE ø
MONITOR OUT
CD
)
ANTENNA
IN
SAT
S
-
VIDEO
)
M
D
MONITOR
OUT
SURROND
L
R
VCR
DVR
/
AM
SURROND
LOOP
BCK
Y
P
B
P
R
Y
R
IN
L
D
IGITAL OUT
FM
OUT
IN
IN
IN
CD player
UNBAL
VIDEO
VCR
DVR
/
75
Ω
FRONT
CENTER
R
L
S
P
E
A
K
E
R
S
COAX
TV
/
OUT
SAT
IN
IN
DVD
MONOR
OUT
T
V
/
/
LD
IN
IN
SAT
FRONT
D
V
D
A
5.1CH
REC INPUT
SUB
WOOER
DVD
LD
/
IN
CD-R
TAPE
/
PREO
DIGITAL OUT
COAX
/
MD
CONTROL
DVD player
OUT
IN
PLAY
R
AUDIO
L
If you have an LD player, you need to make special connections to ensure you can play 2 RF
format LDs on your system. If this is the case, hook up your DVD or LD player directly to an RF
demodulator using both the 2 RF output and either a coaxial or optical digital connection. We
also recommend hooking up your digital components to analog audio jacks as well. Make sure
the RF demodulator digital in switch is set correctly (optical or coaxial depending on the
connection). See the component's instruction manual if you are unsure about its input and
output jacks.
15
En
XRB3013A.13.25
15
01.12.12, 4:42 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
03
Co n n e ct in g u p
Co n n e ct in g a u d io co m p o n e n t s
To begin set up, connect your analog audio components (such as a cassette deck) to the jacks. For
components you want to record with, you need to hook up four plugs to the receiver (a set of stereo
inputs and a set of stereo outputs), but for components that only play, you only need to hook up one
set of stereo plugs. You must also hook up your digital components to analog audio jacks if you want
to record to/from digital components (like an MD) to/from analog components. See page 14 for
more on digital connections.
When connecting your equipment, always make sure the power is turned off and the power cord is
disconnected from the AC outlet.
The arrows indicate the direction of the audio signal.
OUTPUT
DIGIT
ASSI
L
AUX
CD
DVD 5.1CH INPUT
CENTER SUB W.
IN
IN
R
ANTENNA
AM
VCR
DVR
/
CD player
R
SURROUND
L
LOOP
FM
IN
IN
IN
UNBAL
VIDEO
75
‰
IN
IN
TV
/
OUT
SAT
REC PLAY
DVD
MONI
OUT
/
LD
FRONT
D
V
D
L
5.1CH
REC INPUT
SUB
WOOF
IN
CD-R
TAPE
/
R
PREOU
/
MD
IN
PLAY
R
AUDIO
L
CD-R/Tape/MD Deck
16
En
XRB3013A.13.25
16
01.12.12, 4:42 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Co n n e ct in g u p
03
Co n n e ct in g DVD 5.1 ch a n n e l co m p o n e n t s
If you prefer to use a seperate component for decoding DVDs, you can connect a decoder or a DVD
player with multi-channel analog outputs to the multi-channel inputs of this receiver.
When connecting your equipment, always make sure the power is turned off and the power cord is
disconnected from the AC outlet.
The arrows indicate the direction of the signal.
DVD/multi-channel decoder with
5.1 channel analog output jacks
VSX-D711
DIGITAL IN
COAX
OPT
ASSIGNABLE
AUX
CD
DVD 5.1CH INPUT
CENTER SUB W.
IN
/
(
¥
ø
)
¥
DVD/ LD
CD
T
V
/
SAT
ANTENNA
IN
S
-
VIDEO
ONITOR
OUT
SURROUND
OUTPUT
FRONT
SUB
VCR
DVR
/
OUTPUT
W OOFER
OUTPUT
AM
R
SURROUND
L
CENTER
OUTPUT
VIDEO
OUTPUT
LOOP
FM
OUT
IN
IN
IN
L
L
R
UNBAL
VDEO
VCR
DVR
/
75
‰
IN
IN
S
P
E
A
K
E
R
S
TV
/
OUT
SAT
IN
R
DVD
MONITOR
OUT
T
V
/
/
LD
IN
IN
SAT
FRONT
D
V
D
A
5.1CH
REC INPUT
SUB
WOOFER
DVD
LD
/
IN
CD-R
TAPE
/
PREOUT
/
MD
CONTROL
OUT
IN
PLAY
R
AUDIO
L
DIGITAL IN
COAX
OPT
OPT
ASSIGNABLE
AUX
CD
DVD 7.1CH INPUT
IN
CENTER
SUB W.
COMPONENT
VIDEO
I
)
¥
ø
(
CD
(
/
/
DVD/ LD
T
V
/
CD-R/
TAPE ø
DIGITAL
OUT
¥
MONITOR
)
ANTENNA
IN
SAT
S
-
VIDEO
)
M
D
MONITOR
OUT
SURROUND
R
L
VCR
DVR
/
AM
SURROUND
LOOP
BACK
Y
P
B
F
RONT
SURROUND
SURROUND
BACK OUTPUT
R
L
FM
OUT
SUB
IN
IN
IN
UNBA
OUTPUT
OUTPUT
VIDEO
VCR
DVR
/
CENTER
OUTPUT
FRONT
W OOFER
VIDEO
OUTPUT
75
Ω
R
L
S
P
E
A
K
E
R
S
TV
/
OUTPUT
OUT
SAT
IN
L
R
L
L
IN
DVD
MONITOR
OUT
T
V
/
/
LD
IN
IN
SAT
FRONT
D
V
D
A
R
R
5.1CH
REC INPUT
SUB
WOOFER
DVD
LD
/
IN
CD-R
TAPE
/
PREOUT
/
MD
CONTROL
OUT
IN
PLAY
R
AUDIO
L
VSX-D811S
DVD/multi-channel decoder with
7.1 channel analog output jacks
•
•
The multi-channel input can only be used when DVD 5.1 CH (or DVD 7.1 CH) is selected (see
page 37).
If the component you are connecting (to the VSX-D811S) only has one surround back channel
output, change the Surround back channel input setting (page 43) to SB 1ch IN.
17
En
XRB3013A.13.25
17
01.12.12, 4:42 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
03
Co n n e ct in g u p
Co n n e ct in g vid e o co m p o n e n t s
Connect your video components to the jacks as shown below. With digital video components (like a
DVD player), you must use the connections shown on this page for the video signal, but in order to
hear a digital source (like a DVD) you should hook up the audio to a digital input (see page 14). It is
also a good idea to hook up your digital components with analog audio connections (see page 16).
For better quality video, you can hook up using the component video jacks or the S-video jacks
(quality descends in this order) on the rear of the receiver instead of the regular video jacks. Make
sure they are connected to the video component using the same kind of connection.
When connecting your equipment, always make sure the power is turned off and the power cord is
disconnected from the AC outlet.
The arrows indicate the direction of the signal.
Video deck
INPUT
OUTPUT
VIDEO
OUTPUT
VIDEO
VIDEO
DIGITAL IN
COAX
ASSIGNABLE
AUX
CD
DVD 5.1CH INPUT
CENTER SUB W.
IN
IN
L
L
L
(
)
¥
(
)
ø
(
DVD/ LD
CD
T
R
R
ANTENNA
AM
S
-
VIDEO
MONITOR
OUT
R
VCR
DVR
/
R
SURROUND
L
TV tuner (or
LOOP
FM
OUT
IN
IN
IN
UNBAL
DEO
Satellite tuner)
VCR
DVR
/
75
‰
IN
IN
TV
/
OUT
SAT
IN
DVD
MONITOR
OUT
T
V
/
/
LD
IN
IN
SAT
FRONT
D
V
D
INPUT
VIDEO
5.1CH
REC INPUT
SUB
WOOFER
DVD
LD
/
OUTPUT
IN
CD-R
TAPE
/
PREOU
/
MD
CONTROL
VIDEO
OUT
IN
PLAY
R
AUDIO
L
L
R
TV (monitor)
DVD or LD player
Co n n e ct in g t o t h e fro n t p a n e l
vid e o t e rm in a l
Front video connections are accessed via the
front panel input selector as VIDEO. There are
REO/
ECT
SIGNAL
SELECT
MIDNIGHT/
LOUDNESS
MONITOR
TONE
QUICK SETUP
SPEAKERS
MULTI JOG
VIDEO INPUT
standard audio/video jacks as well as an
S-video jack (the VSX-D811S also has an optical
input jack). Hook them up the same way you
made the rear panel connections.
DIGITAL IN
S-VIDEO
VID
AUDI
R
Video
camera
(etc.)
VIDEO INUT
DIGITAL OUT
V
L
R
18
En
XRB3013A.13.25
18
01.12.12, 4:42 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Co n n e ct in g u p
03
An t e n n a sn a p co n n e ct o rs
Twist the exposed wire strands together and
insert into the hole, then snap the connector
shut.
Co n n e ct in g a n t e n n a s
Connect the AM loop antenna and the FM wire
antenna as shown below. To improve reception
and sound quality, connect external antennas
(see Using external antennas below). Always
make sure that the receiver is switched off and
unplugged from the wall outlet before making
or changing any connections.
3/8 in. (10m m )
AM LOOP
ANTENNA
Usin g e xt e rn a l a n t e n n a s
To im p ro ve FM re ce p t io n
Connect an external FM antenna.
FM
UNBAL
7 5 Ω
FM WIRE
ANTENNA
FM
ANTENNA
75 Ω coaxial cable
FM w ire a n t e n n a
Connect the FM wire antenna and fully extend
vertically along a window frame or other
suitable area, etc.
To im p ro ve AM re ce p t io n
Connect a 15-18 feet length of vinyl-coated wire
to the AM antenna terminal without disconnect-
ing the supplied AM loop antenna.
AM lo o p a n t e n n a
For the best possible reception, suspend
horizontally outdoors.
Assemble the antenna and connect to the
receiver. Attach to a wall, etc. (if desired) and
face in the direction that gives the best
reception.
Outdoor antenna
Indoor
antenna
(Vinyl-
coated
15-18 ft. (5–6m)
wire)
AM LOOP
ANTENNA
19
En
XRB3013A.13.25
19
01.12.12, 4:42 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
03
Co n n e ct in g u p
Co n n e ct in g t h e sp e a ke rs (VSX-D711)
A complete setup of six speakers (including the subwoofer) is shown below, but everyone’s home
setup will vary. Simply connect the speakers you have in the manner shown below. The receiver will
work with just two stereo speakers (the front speakers in the diagram) but using at least three
speakers is recommended, and a complete setup is best. If you’re not using a subwoofer, change
the front speaker setting (see Speaker setting on page 39) to large.
Make sure you connect the speaker on the right to the right terminal and the speaker on the left to
the left terminal. Also make sure the positive and negative (+/–) terminals on the receiver match
those on the speakers.
Front Speakers
Surround Speakers
Center Speaker
C
L
R
SL
SR
Use speakers with a
nominal impedance
of 8 Ω to 16 Ω.
DIGITAL IN
COAX
OPT
OPT
ASSIGNABLE
AUX
CD
DVD 5.1CH INPUT
IN
IN
CENTER
SUB W.
COMPONEN
VIDEO
ASSIGNABLE
(
)
D
V
D
/
LD N
¥
(
)
¥
(
)
ø
(
)
¥
DVD/ LD
CD
T
V
/
S
DIGITAL
OUT
MONITR OUT
ANTENNA
AM
S
-
VIDEO
MONITOR
OUT
VCR
DVR
/
R
SURROUND
L
LOOP
Y
P
B
P
R
Y
P
B
PR
(
)
T
V / SAT IN
ø
FM
OUT
IN
IN
IN
UNBAL
VIDEO
VCR
DVR
/
75
‰
FROT
CENTER
SURROUND
FRONT
IN
IN
R
L
R
L
R
L
S
P
E
A
K
E
R
S
TV
/
OUT
SAT
IN
DVD
MONITOR
OUT
AC OUTLET
T
V
/
/
LD
IN
IN
SAT
FRONT
D
V
D
A
B
PREOUT
CENTER
5.1CH
REC INPUT
SUB
WOOFER
DVD
LD
/
IN
CD-R
TAPE
/
PREOUT
/
MD
CONTROL
OUT
IN
PLAY
R
AUDIO
L
VSX-D711
TV
INPUT
Be sure to complete all
connections before
connecting this unit to
the AC power source.
Powered subwoofer
When using the speaker on your TV as the center speaker
(C), connect the CENTER PREOUT jack on this unit to the
audio input jack on your TV. In this case the center speaker
shown is unnecessary.
20
En
XRB3013A.13.25
20
01.12.12, 4:42 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Co n n e ct in g u p
03
Co n n e ct in g t h e sp e a ke rs (VSX-D811S)
A complete setup of eight speakers (including the subwoofer) is shown below, but everyone’s home
setup will vary. Simply connect the speakers you have in the manner shown below. The receiver will
work with just two stereo speakers (the front speakers in the diagram) but using at least three
speakers is recommended, and a complete setup is best for surround sound. If you’re not using a
subwoofer, change the front speaker setting (see Speaker setting on page 39) to large.
Make sure you connect the speaker on the right to the right terminal and the speaker on the left to
the left terminal. Also make sure the positive and negative (+/–) terminals on the receiver match
those on the speakers.
Use speakers with a nominal impedance of 8 Ω to 16 Ω.
Front Speakers
Surround Speakers
SL SR
Center Speaker
C
Surround Back Speakers
SBL SBR
L
R
DIGITAL IN
COAX
OPT
OPT
ASSIGNABLE
AUX
CD
DVD 7.1CH INPUT
IN
N
CENTER
SUB W.
PREOUT
SURROUND
BACK
COMPONET
VIDEO
ASSIGNABLE
(
)
D
V
D
/
LD IN
¥
L
L
(
)
¥
(
)
ø
(
CD
DVD/ LD
T
V
/
D-R/
DIGITAL
OUT
¥
ø
MONIOR OUT
)
ANTENNA
S
-
VIDEO
)
M
D
MONITOR
OUT
SURROUND
L
R
VCR
DVR
/
AM
SURROUND
LOOP
BACK
P
B
P
R
Y
P
B
P
R
R
R
R
IN
L
(
)
T
V
/ SAT IN
ø
FRON
SURROUND
CENTER
FM
OUT
IN
IN
IN
UNBAL
VIDEO
VCR
DVR
/
75
Ω
FRONT
CENTER
SURROUND BACK
SURROUND
FRONT
R
L
R
L
R
L
R
L
S
P
E
A
K
E
R
S
TV
/
OUT
SAT
IN
AC OUTLET
IN
DVD
MONITOR
OUT
T
V
/
/
LD
IN
IN
SAT
FRONT
D
V
D
A
B
5.1CH
REC INPUT
SUB
WOOFER
DVD
LD
/
IN
CD-R
TAPE
/
PREOUT
/
MD
CONTROL
OUT
IN
PLAY
R
AUDIO
L
VSX-D811S
Subwoofer
(passive)
INPUT
TV
Be sure to complete
all connections
before connecting
this unit to the AC
power source.
Powered subwoofer
21
En
XRB3013A.13.25
21
01.12.12, 4:42 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
03
Co n n e ct in g u p
•
When using the speaker on your TV as the center speaker (C), connect the CENTER PREOUT
jack on this unit to the audio input jack on your TV. In this case the center speaker shown is
unnecessary.
•
•
If you are using only one surround back speaker, connect the positive wire to the right channel
(+) terminal, and the negative wire to the left channel (–) terminal (see illustration on page 11).
If you select subwoofer (SB SUBWF) in the Surround back speaker setting (see page 39) you can
hook up a subwoofer instead of speakers to the surround back speaker terminals. Connect the
positive wire to the right channel (+) terminal, and the negative wire to the left channel (–)
terminal (see illustration on page 11).
Sp e a ke r t e rm in a ls
3/8 in. (10m m )
1
2
3
Tw ist exposed w ire strands together.
Loosen speaker terminal and insert exposed w ire.
Tighten terminal.
The speaker terminals also
accept single banana
plugs. (Refer to speaker
manual for details.)
Make sure that all the bare speaker wire is twisted together and inserted fully into the speaker
terminal. If any of the bare speaker wire touches the back panel it may cause the power to cut off as
a safety measure. Use good quality speaker wire to connect the speakers to the receiver.
A a n d B sp e a ke r syst e m s
The receiver has two speaker systems: A and B. A is the main system supporting the full speaker
setup. If you switch on both A and B speaker systems, only the front speakers and the subwoofer
will be audible. No sound will come from the center, surround, or surround back speakers, but
multi-channel sources will be down-mixed to the active speakers so no sound will be lost. Similarly,
if you choose just the B system you‘ll only hear the front speakers connected to the B system and
multi channel sources will be down-mixed to these two speakers.
Hin t s o n sp e a ke r p la ce m e n t
Speakers are usually designed with a particular placement in mind. Some are designed to be
floorstanding, while others should be placed on stands to sound their best. Some should be placed
near a wall; others should be placed away from walls. We have provided a few tips on getting the
best sound from your speakers (below), but you should also follow the guidelines on placement that
the speaker manufacturer provided with your particular speakers to get the most out of them.
•
•
Place the front left and right speakers at equal distances from the TV.
When placing speakers near the TV, we recommend using magnetically shielded speakers to
prevent possible interference, such as discoloration of the picture when the TV is switched on. If
you do not have magnetically shielded speakers and notice discoloration of the TV picture, move
the speakers farther away from the TV.
22
En
XRB3013A.13.25
22
01.12.12, 4:43 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Co n n e ct in g u p
03
•
Place the center speaker above or below the
TV so that the sound of the center channel is
localized at the TV screen.
3-D view of speaker set up (VSX-D711)
If you choose to install the center speaker
on top of the TV, be sure to secure it with
putty, or by other suitable means, to
reduce the risk of damage or injury
resulting from the speaker falling from
the TV in the event of external shocks
such as earthquakes.
Overhead view of speaker set up
(VSX-D811S)
Front
Right
Front
Left
•
•
If possible, place the surround speakers
slightly above ear level.
Center
Try not to place the surround speakers
further away from the listening position than
the front and center speakers. Doing so can
weaken the surround sound effect.
Subwoofer
Surround
Left
Surround
Right
•
To achieve the best possible surround
sound, install your speakers as shown
below. Be sure all speakers are installed
securely to prevent accidents and improve
sound quality.
Listening Position
Overhead view of speaker set up (VSX-D711)
Surround Back
Left
Surround Back
Right
Front
Right
Front
Left
Center
3-D view of speaker set up (VSX-D811S)
Subwoofer
Surround
Left
Surround
Right
Listening Position
23
En
XRB3013A.13.25
23
01.12.12, 4:43 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
03
Co n n e ct in g u p
Co n n e ct in g a d d it io n a l a m p lifie rs
(VSX-D811S o n ly)
This receiver has more than sufficient power for any home use, however it is possible to add
additional amplifiers to every channel. Make the connections shown below to add amplifiers to
power your speakers. Always make sure that the receiver is switched off and unplugged from the
wall outlet before making or changing any connections.
The arrows indicate the direction of the audio signal.
ANALOG IN
Front channel
amplifier
L
R
VSX-D811S
ANALOG IN
Surround channel
amplifier
DIGITAL IN
ASSIGNABLE
AUX
DVD 7.1CH INPUT
IN
CENTER
R
SUB W.
PREOUT
SURROUND
BACK
/
I
L
L
(
DVD
SUR
ROUND
L
R
CD
ANTENNA
IN
L
VCR
DVR
/
AM
SURROUND
L
LOOP
BACK
R
R
R
R
ANALOG IN
/
FRONT
SURROUND
CENTER
I
FM
IN
IN
IN
Surround back
UNBAL
75
VIDEO
IN
OUT
CK
SURROUND
FRONT
/
L
R
L
R
L
TV
SAT
channel amplifier
AC OUTLET
IN
DVD
MONITOR
OUT
/
LD
FRONT
D
V
D
B
5.1CH
SUB
WOOFER
REC INPUT
IN
CD-R
TAPE
/
PREOUT
/
MD
ANALOG IN
Center channel
amplifier
IN
PLAY
R
AUDIO
L
INPUT
Powered
subwoofer
•
•
To hear sound only from the pre-outs, disconnect any speakers that are connected directly to
the receiver.
If you’re not using a subwoofer, change the front speaker setting (see Speaker setting on page
39) to large.
24
En
XRB3013A.13.25
24
01.12.12, 4:43 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Co n n e ct in g u p
03
AC o u t le t
[switched 100 W (0.8 A) max]
Power supplied through this outlet is turned on and off by the
receiver's POWER switch. Total electrical power consumption of
connected equipment should not exceed 100 W (0.8 A).
AC OUTLET
SWITCHED
100 W MAX
0.8 A MAX
DO NOT CONNECT A MONITOR, TV SET, HEATER, OR SIMILAR
APPLIANCE TO THIS UNIT'S AC OUTLET.
Do not connect appliances with high power consumption to the
AC OUTLET in order to avoid overheating and fire risk. This can
also cause the receiver to malfunction.
•
•
Make sure no exposed speaker wire is touching the rear panel, this may cause the receiver to
turn off automatically.
This unit should be disconnected by removing the power plug from the wall socket when not in
regular use (ex. when on vacation).
POWER-CORD CAUTION
Handle the power cord by the plug. Do not pull out the plug by tugging the cord and never touch the
power cord when your hands are wet as this could cause a short circuit or an electric shock. Do not
place the unit, a piece of furniture, etc., on the power cord, or pinch the cord. Never make a knot in
the cord or tie it with other cords. The power cords should be routed such that they are not likely to
be stepped on. A damaged power cord can cause a fire or give you an electrical shock. Check the
power cord once in a while. When you find it damaged, ask your nearest Pioneer authorized service
center or your dealer for a replacement.
Op e ra t in g o t h e r Pio n e e r
CONTROL
co m p o n e n t s
By connecting a control cord (optional),
IN
CONTROL
OUT
OUT
you can point the remote controls of other
Pioneer components at the receiver’s
remote sensor. The remote control signals
are received by the remote sensor of this
unit, and sent to the other devices via the
Receiver
CONTROL OUT terminal.
Other Pioneer products
with Î mark
Remote
control unit
Connect to CONTROL
IN terminal of other
Pioneer products
with Î mark.
25
En
XRB3013A.13.25
25
01.12.12, 4:43 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
04
Co n t ro ls a n d Disp la ys
Fro n t p a n e l
1
2
3
4
5
AUDIO/VIDEO MULTI-CHANNEL RECEIVER N∫m-Û≥,,
INPUT
SELECTOR
MULTI JOG
ENTER
STANDBY
STANDBY/ON
MASTER VOLUME
DOWN
UP
PHONES
R
7
6
8
9
10
11 12 13 14 15 16
ADVANCED
SURROUND
STEREO/
DIRECT
SIGNAL
SELECT
MIDNIGHT/
LOUDNESS
MONITOR
TONE
QUICK SETUP
STATION
TUNING
STANDARD
SPEAKERS
MULTI JOG
LISTENING MODE
VIDEO INPUT
TUNER EDIT
CLASS
BAND
MPX
INPUT ATT FL DIMMER
DIGITAL IN
MULTI JOG
S-VIDEO
VIDEO
L
AUDIO
R
24 23 22 21 20 19
18
17
8
STATION (+/–) buttons (pages 46–47)
1
STANDBY/ON
Selects station presets when using the tuner.
Switches the receiver between on and standby.
9
TUNING buttons (page 45)
2
STANDBY indicator
Selects the frequency when using the tuner.
Lights when the receiver is in standby.
10 LISTENING MODE buttons
3
Remote sensor
Receives the signals from the remote control.
STANDARD (pages 32, 34)
Press for Standard decoding and to switch
between the various Pro Logic II options.
4
5
ENTER
MULTI JOG/INPUT SELECTOR dial
ADVANCED SURROUND (pages 33, 35)
Use to switch between the various
surround modes.
The MULTI JOG/INPUT SELECTOR dial
performs a number of tasks. Use it to select
options after pressing TONE CONTROL, QUICK
SETUP or TUNER EDIT.
STEREO/DIRECT (pages 32, 35)
Switches direct playback on or off. Direct
playback bypasses the tone controls and
channel levels for the most accurate
reproduction of a source.
6
7
MASTER VOLUME
PHONES jack
Use to connect headphones. When the
headphones are connected, there is no sound
output from the speakers.
26
En
XRB3013A.26.31
26
01.12.12, 4:43 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Co n t ro ls a n d Disp la ys
04
11 SIGNAL SELECT (pages 34, 37, 48)
18 DIGITAL IN (VSX-D811S only) (page 18)
Use to select an input signal.
19 FL DIMMER
Use this button to make the fluorescent display
(FL) dimmer or brighter.
12 MIDNIGHT/LOUDNESS (page 36)
Use Midnight when listening to movie sound-
tracks at low volume. Use Loudness to boost
the bass and treble at low volume.
20 INPUT ATT
Use to attenuate (lower) the level of an analog
input signal to prevent distortion.
13 SPEAKERS
Use to cycle through the speaker
system: A = B = A+B
21 MPX (page 45)
Press to receive a radio broadcast in mono.
14 MONITOR
Press to switch tape monitoring on/off.
22 BAND (page 45)
Switches between AM and FM radio bands.
15 TONE
23 CLASS (pages 46–47)
Switches between the three banks (classes) of
station presets.
Press this button to access the bass and treble
controls, which you can then adjust with the
MULTI JOG/INPUT SELECTOR dial.
24 TUNER EDIT (pages 46–47)
Press to memorize and name a station for recall
using the STATION +/– buttons.
16 QUICK SETUP
17 VIDEO INPUT (page 18)
Disp la y
1
2
3
4
5
6
7
8
9
10 11
12
13
14
15
1
SIGNAL SELECT indicators
SB (VSX-D811S only)
Lights to indicate the type of input signal
assigned for the current component:
Depending on the source, this lights when
a signal with surround back channel
encoding is detected.
AUTO
Lights when AUTO signal select is on
DIGITAL
Lights when a digital audio signal is
detected.
27
En
XRB3013A.26.31
27
01.12.12, 4:43 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
04
Co n t ro ls a n d Disp la ys
2 DIGITAL
10 Character display
Lights when a Dolby Digital signal is
detected.
11 Neo:6 (VSX-D811S)
Lights during NEO:6 processing
ANALOG
12 ADV. SURR (Advanced Surround)
Lights when one of the Advanced Surround
modes has been selected.
Lights when an analog signal is detected.
DTS
Lights when a source with DTS audio
signals is detected.
13 LOUDNESS
Lights when LOUDNESS has been selected.
2
DTS
14 TUNER indicators
When the Standard mode of the receiver is on,
this lights to indicate decoding of a DTS signal.
STEREO:
Lights when a stereo FM broadcast is being
received in auto stereo mode.
3
2 DIGITAL
When the Standard mode of the receiver is on,
this lights to indicate decoding of a Dolby
Digital signal.
MONO:
Lights when the mono mode is set using the
MPX button.
4
2 PRO LOGIC II
When the Standard mode of the receiver is on,
this lights to indicate Pro Logic II decoding.
TUNED:
Lights when a broadcast is being received.
5
ATT
15 Master volume level
Lights when INPUT ATT is used to attenuate
(reduce) the level of the analog input signal.
Shows the overall volume level. ---dB indicates
the minimum level, and −0 dB indicates the
maximum level.
6
DIRECT
Depending on your level settings for each
channel, the maximum level can range between
–10 dB and –0 dB.
Lights when source direct playback is in use.
This function bypasses all tone, balance,
Advanced surround, and Dolby Surround
effects.
7
MIDNIGHT
Lights during Midnight listening.
8
MONITOR
Lights when MONITOR is selected (page 48).
9
Speaker indicator
Shows the speaker system currently in use.
28
En
XRB3013A.26.31
28
01.12.12, 4:43 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Co n t ro ls a n d Disp la ys
04
4
Number buttons/Receiver controls/
Re m o t e co n t ro l
ENTER
Use the number buttons to directly select a
radio frequency (page 45) or the tracks on a CD,
DVD, etc.
10
11
SOURCE
RECEIVER
1
2
3
DVD
RCV
TV
MULTI CONTROL
CD
TUN
VCR
CD-R
TVC
DISPLAY/DISC (ENTER)
The button’s use depends on the
component selected. It can be used to
switch the display between the station
preset name and the frequency for the
tuner, enter commands for TV or DTV, and
can also be used to select a disc in a multi-
CD player.
2
3
FL DIMMER
6
1
TEST TONE
INPUT ATT
5
4
CH SELECT
LEVEL
4
8
9
7
+10
EFFECT
DISPLAY
DISC
ENTER
0
DTV INFO
MPX/RETURN D.ACCESS T.EDIT/GUIDE
8
7
3
¶
BAND
CLASS
DTV ON/OFF DTV MENU
5
1
¡
4
¢
TOP MENU
AUDIO
ANGLE
SUB TITLE
6
7
8
REMOTE SETUP STANDARD
ADV.SURR.
STEREO
MUTE
Receiver Controls
MIDNIGHT/
LOUDNESS
INPUT SEL.
SIGNAL SEL
Press the RCV button first to access the
functions above the number buttons. The
display flashes when it isn’t possible to use
a function.
RECEIVER CONTROL
TUNE
T
ST
ST
ENTER
12
13
TUNE
TEST TONE (page 44)
Sounds the test tone when setting up the
surround sound of the receiver.
CHANNEL
MENU
MASTER VOLUME
TV INPUT
TV VOL
14
15
9
TV
INPUT ATT
TV CONTROL
Attenuates (lowers) the level of an analog
input signal to prevent distortion (when the
overload indicator lights).
AV PRE-PROGRAMMED
REMOTE CONTROL UNIT
FL DIMMER
Dims or brightens the display.
1
SOURCE
CH SELECT (page 44)
Selects a speaker when setting up the
surround sound of the receiver.
Press to turn on/off other components con-
nected to the receiver.
2
MULTI CONTROL buttons
LEVEL +/– (page 44)
Press to select control of other components
(see Controlling the Rest of Your System on
pages 49–52).
Adjusts the levels of the surround sound of
the receiver.
EFFECT +/– buttons (page 35)
3
RCV
Adds or subtracts the amount of effect
with different advanced listening modes
(except 5 or 6 Ch Stereo and Virtual SB).
Switches the remote to controls the receiver
(used to select the features above the number
buttons. (ex. INPUT ATT, FL. DIMMER). Also
use this button to set up surround sound
(pages 38, 44).
29
En
XRB3013A.26.31
29
01.12.12, 4:43 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
04
Co n t ro ls a n d Disp la ys
5
Component/Tuner controls
6
DVD controls (Press DVD first to access)
The main buttons (3, 7, etc.) are used to
control a component after you have selected it
using the MULTI CONTROL buttons. The tuner/
DTV controls above these buttons can be
accessed after you have selected the corre-
sponding MULTI CONTROL button (TUNER or
DVD (when connected to DTV)).
These controls will also function as DTV
controls, depending on the component you’ve
selected.
TOP MENU
Displays the disc ‘top’ menu of a DVD.
AUDIO
Changes the audio language or channel.
DTV INFO
Use to bring up information screens on a
digital TV.
SUBTITLE
Displays/changes the subtitles included in
multilingual DVD-Video discs.
MPX/RETURN (page 45)
Switches between stereo and mono
reception of FM broadcasts. If the signal is
weak then switching to mono will improve
the sound quality. Also acts as a stop
button for CDs, tapes, or DVDs.
ANGLE
Switches camera angles on discs with
multi-angle scenes.
7
REMOTE SETUP (pages 49–52)
Press this button to set up the remote control to
control other components.
D. ACCESS (page 49)
After pressing, you can access a radio
station directly using the number buttons.
8
RECEIVER CONTROL buttons
T. EDIT/GUIDE (page 46–47)
STANDARD (pages 32, 34)
Press to switch between the various Dolby/
DTS modes
Press to memorize and name a station for
recall using the STATION +/– buttons.
Also displays the guides on a digital TV.
ADV. SURR. (pages 33, 35)
Use to switch between the various
surround modes.
BAND (page 45)
Switches between the tuner AM and FM
bands.
STEREO (pages 32, 35)
CLASS (page 46–47)
Switches between the three banks
(classes) of radio station presets.
Switches direct playback on or off. Direct
playback bypasses the tone controls and
channel levels for the most accurate
reproduction of a source.
DTV ON/OFF
Switches a digital TV on/off.
INPUT SELECT
Use to select the input source.
DTV MENU
Displays menus on a digital TV.
SIGNAL SELECT (pages 34, 37, 48)
Use to select between an input signal.
30
En
XRB3013A.26.31
30
01.12.12, 4:43 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Co n t ro ls a n d Disp la ys
04
MIDNIGHT/LOUDNESS (page 36)
Switches to Midnight or Loudness
listening.
MUTE
Mutes the sound (or restores the sound if
it has been muted).
9
TV control buttons
These buttons can only be used to control your
TV.
TV VOLUME +/–
Use to adjust the volume on your TV.
TV INPUT
Use select the TV function.
TV
Use to turn on/off the power of the TV.
10 LED DISPLAY
This display flashes when a command is sent
from the remote control.
11 RECEIVER
This switches between standby and on for this
receiver.
12 }]‘’ (TUNE/ST +/–) /ENTER
Use the arrow buttons when setting up your
surround sound system (see pages 38–43). Also
used to control DVD menus/options and for
deck 1 of a double cassette deck player. Use the
TUNE +/– buttons to find radio frequencies and
use ST +/– to find preset stations (page 45–47).
13 CHANNEL +/–
Select radio station presets. Also skip tracks
backward or forward on CDs, DVDs, etc.
14 MASTER VOLUME +/–
Use to set the listening volume.
15 MENU button
Displays the disc menu of DVD-Video discs. It
also displays TV and DTV menus.
31
En
XRB3013A.26.31
31
01.12.12, 4:43 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
05
Pla yin g so u rce s
Choose one of the following to add depth to a 2
channel source:
In t ro d u ct io n t o So u n d Mo d e s
There are three basic sound options: Stereo/
Direct, Standard or Advanced Surround.
Pro Lo g ic
This mode gives 4.1 channel surround sound. It
is less sensitive to the quality of the source
material, so may be useful when Pro Logic II
Movie/ Music modes don’t give good results.
St e re o /Dire ct
When you select STEREO or DIRECT, you will
hear the source through just the front left and
right speakers (and possibly your subwoofer
depending on your speaker settings). Dolby
Digital and DTS multichannel sources are
downmixed to stereo.
Pro Lo g ic II Mo vie
This mode gives 5.1 channel surround sound. It
is suitable for movies, especially those recorded
in Dolby Surround. The channel separation and
movement of surround effects is comparable to
Dolby Digital 5.1.
In STEREO, you’ll hear the audio with your
surround settings and you can still use the
Midnight, Loudness, and Tone control func-
tions.
With DIRECT, you will bypass all effects and
surround settings so that the audio remains as
close to the source audio signal as possible.
Pro Lo g ic II Mu sic
This mode gives 5.1 channel surround sound
and is suitable for music. The surround effect is
more enveloping than Pro Logic II Movie.
If you switch on Midnight listening, Loud-
ness, or the Tone controls when DIRECT is
selected, the receiver automatically
switches to STEREO.
Ne o :6 Cin e m a (VSX-D811S o n ly)
This mode gives 6.1 channel surround sound
and is suitable for movies. The Neo:6 Cinema
mode delivers good channel separation for
movie soundtracks.
St a n d a rd m o d e
The standard mode can be used to decode
Dolby Digital, DTS, or Dolby Surround sources.
The other surround sound options (next
column) can add multi-channel sound to
regular stereo sources.
Ne o :6 Mu sic (VSX-D811S o n ly)
This mode gives 6.1 channel surround sound
and is suitable for music. The Neo:6 Music
mode plays the stereo source as is through the
front left/right speakers, and generates a
natural, ambient surround and center sound.
You can identify Dolby Digital software by the
1 or
marks. Most Dolby
Surround software is marked 3, but
unmarked software may also incorporate Dolby
Surround. Depending on the source, the 6.1
channel setting (page 40), and the sound mode
you have selected, you may not get sound from
the surround back speakers in your setup. For
more on this, refer to the table on the next page.
32
En
XRB3013A.32.37
32
01.12.12, 4:44 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Pla yin g so u rce s
05
Virt u a l Su rro u n d Ba ck (VIRTL SB)
The Virtual Surround Back effect simulates 7.1
surround channel listening, giving the impres-
sion that there are two surround back speakers
in your system when listening to a 5.1 channel
source.
Ad va n ce d Su rro u n d m o d e s
These are designed to be used with multi-
channel surround sound audio/visual sources
(like DVDs and LDs). Most Advanced Surround
modes are designed to be used with film
soundtracks, but some modes are also suited
for music sources. Try different settings with
various soundtracks to see which you like.
Exp a n d e d
This mode is especially designed to give sound
depth to stereo sources, and lets you hear two-
channel (stereo) signals as simulated multi-
channel surround sound. Use with Dolby Pro
Logic for a stereo surround effect. You can also
use with Dolby Digital sources for a wider
stereo field than the Standard modes.
Depending on the source, the 6.1 channel
setting (page 40), and the sound mode you have
selected, you may not get sound from the
surround back speakers in your setup. For more
on this, refer to the table below.
Mo vie
5-Ch a n n e l St e re o (VSX-D711)
This can be selected to give multi-channel
sound to a stereo source, using all of the
speakers in your setup.
Simulates the relaxed environment of a movie
theater, and is suitable for watching movies.
Mu sic
Simulates the acoustic environment of a large
concert hall and is suitable for music or
musical sources.
6-Ch a n n e l St e re o (VSX-D811S)
This can be selected to give multi-channel
sound to a stereo source, using all of the
speakers in your setup.
Typ e o f so u rce
6.1 ch .
se t t in g
St a n d a rd
Ad va n ce d
Mo vie /Mu sic
6 Ch .
Virt u a l SB
Exp a n d e d
St e re o
√
√
√
√
√
√
√
Au t o
Fix
DTS-ES/Dolby Digital Matrix encoded
multi-channel sources with 6.1 surround
√
√
√
√
Au t o
Fix
Dolby Digital/DTS encoded multi-channel
sources with stereo surround
√
√
√
√
√
Au t o
Fix
Dolby Digital/DTS encoded multi-channel
sources with mono surround, Stereo sources
√
√
√
Au t o
Fix
Analog 2-channel (stereo) source
•
•
The checkmark (√) indicates when sound will be output from the surround back speaker(s).
See the 6.1 channel setting on page 40 to select between AUTO or FIX.
33
En
XRB3013A.32.37
33
01.12.12, 4:44 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
05
Pla yin g so u rce s
•
•
You may get digital noise when a LD or CD
player compatible with DTS is playing an
analog signal. To prevent noise, make the
proper digital connections (page 14) and
set the signal input to DIGITAL.
Ch o o sin g t h e in p u t sig n a l
You need to hook up a component to both
analog and digital inputs on the rear of the
receiver to select between input signals.
Some DVD players don’t output DTS
signals. For more details, refer to the
instruction manual supplied with your DVD
player.
SOURCE
RECEIVER
DVD
RCV
TV
MULTI CONTROL
CD
TUN
VCR
CD-R
TVC
2
3
FL DIMMER
6
1
TEST TONE
INPUT ATT
List e n in g t o m u lt i-ch a n n e l
p la yb a ck
5
4
CH SELECT
LEVEL
8
9
7
+10
EFFECT
DISPLAY
DISC
ENTER
0
DTV INFO
MPX/RETURN D.ACCESS T.EDIT/GUIDE
8
7
3
DTV ON/OFF DTV MENU
¶
BAND
CLASS
1
¡
4
¢
TOP MENU
AUDIO
SUB TITLE
ANGLE
SOURCE
RECEIVER
REMOTE SETUP STANDARD
ADV.SURR.
STEREO
MUTE
MIDNIGHT/
LOUDNESS
INPUT SEL.
SIGNAL SEL
DVD
RCV
TV
MULTI CONTROL
CD
TUN
VCR
CD-R
TVC
RECEIVER CONTROL
TUNE
T
ST
ST
2
3
FL DIMMER
6
1
ENTER
TEST TONE
INPUT ATT
5
4
TUNE
CH SELECT
LEVEL
8
9
7
CHANNEL
+10
EFFECT
DISPLAY
DISC
ENTER
0
DTV INFO
MPX/RETURN D.ACCESS T.EDIT/GUIDE
8
7
3
DTV ON/OFF DTV MENU
¶
BAND
CLASS
1
¡
4
¢
•
Press SIGNAL SEL (SIGNAL SELECT) to
TOP MENU
AUDIO
SUB TITLE
ANGLE
select the input signal corresponding to the
source component.
REMOTE SETUP STANDARD
ADV.SURR.
STEREO
MUTE
MIDNIGHT/
LOUDNESS
INPUT SEL.
SIGNAL SEL
RECEIVER CONTROL
TUNE
T
Each press switches between AUTO, DVD 5.1
ch/DVD 7.1ch, ANALOG and DIGITAL. The
default is AUTO.
ST
ST
ENTER
TUNE
CHANNEL
DVD 5.1ch (VSX-D711) and DVD 7.1ch (VSX-
D811S) will only appear when DVD/LD is
selected using the remote or the MULTI JOG/
INPUT SELECTOR dial on the front panel.
1
2
Sw itch on the playback component.
When set to DIGITAL, 2 DIGITAL lights when
a Dolby Digital signal is input, and DTS lights
when a DTS signal is input.
Select the source you w ant to playback.
Use the MULTI CONTROL buttons on the
remote (or MULTI JOG/INPUT SELECTOR dial
on the front panel).
3
Press STANDARD.
If the source is Dolby Digital, DTS, or Dolby
Surround encoded, the proper decoding format
will automatically be selected and shows in the
display.
•
This receiver can only play back Dolby
Digital, PCM (32kHz, 44kHz, 48kHz, and 96
kHz) and DTS digital signal formats. With
other digital signal formats, set to
ANALOG.
34
En
XRB3013A.32.37
34
01.12.12, 4:44 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Pla yin g so u rce s
05
If you are listening to a two channel source,
each press changes the display as follows:
Usin g Ad va n ce d Su rro u n d
When you select one of the Advanced surround
options, Dolby Pro Logic, Dolby Digital and DTS
decoding is done automatically corresponding
to the input signal. Use Advanced surround to
add effects to the surround sound.
Pro Logic II Movie
Pro Logic
Pro Logic
II Music
•
Press ADV.SURR. (ADVANCED SUR-
NEO:6
Music*
NEO:6
Cinema*
ROUND) repeatedly to cycle the sound
options.
Each press changes the display as follows:
* VSX-D811S only
Refer to page 32 for more details about each
mode.
Movie
Music
Virtual SB
Expanded
4
Start playback of the component you
5-Stereo*/
6-Stereo**
selected in step 1.
* VSX-D711
** VSX-D811S
Usin g St e re o /Dire ct
When you select STEREO or DIRECT, you will
hear the source through just the front left and
right speakers (and possibly your subwoofer
depending on your speaker settings). Dolby
Digital and DTS multichannel sources are
downmixed to stereo. See page 32 for more on
these modes.
Refer to page 33 for more details about each
surround effect.
The Advanced surround effects can be
adjusted in the range of 10 to 90 (the
default setting is 70) by pressing RCV then
pressing EFFECT +/– . The effect level can
be set for each Advanced surround mode.
The Standard mode cannot be changed.
•
Press STEREO (STEREO/DIRECT on the
front panel) repeatedly to sw itch betw een
the tw o options.
If you switch on Midnight listening,
Loudness, or the Tone controls when
DIRECT is selected, the receiver automati-
cally switches to STEREO.
35
En
XRB3013A.32.37
35
01.12.12, 4:44 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
05
Pla yin g so u rce s
2
Use the MULTI JOG/INPUT SELECTOR
Usin g Lo u d n e ss a n d Mid n ig h t
list e n in g
The Loudness listening feature can be used to
get good bass and treble from music sources at
low volume levels.
dial to change the amount of bass or treble
as necessary.
Wait about five seconds for your changes to be
input automatically.
The Midnight listening feature allows you to
hear effective surround sound of movies at low
volume levels. The effect automatically adjusts
according to the volume at which you’re
listening.
Pla yin g o t h e r so u rce s
SOURCE
RECEIVER
DVD
RCV
TV
MULTI CONTROL
CD
TUN
VCR
CD-R
TVC
•
Press MIDNIGHT/LOUDNESS.
Each press cycles through the effects as
follows:
2
3
FL DIMMER
6
1
TEST TONE
INPUT ATT
5
4
CH SELECT
LEVEL
8
9
7
+10
EFFECT
DISPLAY
DISC
Midnight
Off
ENTER
0
DTV INFO
MPX/RETURN D.ACCESS T.EDIT/GUIDE
8
7
3
DTV ON/OFF DTV MENU
¶
BAND
CLASS
1
¡
4
¢
TOP MENU
AUDIO
SUB TITLE
ANGLE
Loudness
REMOTE SETUP STANDARD
ADV.SURR.
STEREO
MUTE
MIDNIGHT/
LOUDNESS
INPUT SEL.
SIGNAL SEL
RECEIVER CONTROL
TUNE
T
Usin g t h e t o n e co n t ro ls
Depending on what you are listening to, you
may want to adjust the bass or treble using the
front panel tone control.
ST
ST
ENTER
TUNE
CHANNEL
AUDIO/VIDEO MULTI-CHANNEL RECEIVER N∫m-Û≥,,
1
Turn on the pow er of the playback
component.
INPUT
SELECTOR
MULTI JOG
ENTER
2
3
Turn on the pow er of the receiver.
Select the source you w ant to playback.
MASTER VOLUME
MONITOR
TONE
QUICK SETUP
SPEAKERS
DOWN
UP
MULTI JOG
Use the MULTI CONTROL buttons on the
remote (or MULTI JOG/INPUT SELECTOR dial
on the front panel).
VIDEO INPUT
S-VIDEO
VIDEO
L
AUDIO
R
R
4
Start playback of the component you
selected in step 1.
1
Press TONE to select the frequency you
w ant to adjust.
Each press switches between BASS and
TREBLE.
36
En
XRB3013A.32.37
36
01.12.12, 4:44 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Pla yin g so u rce s
05
•
When playback from the multi-channel
inputs is selected, only the volume and
channel levels can be set.
Se le ct in g t h e m u lt i-ch a n n e l
a n a lo g in p u t s
If you have connected a decoder or a DVD
player with multi-channel analog outputs to this
receiver (page 17), you must select the analog
multi-channel inputs for surround sound
playback.
SOURCE
RECEIVER
DVD
RCV
TV
MULTI CONTROL
CD
TUN
VCR
CD-R
TVC
2
3
FL DIMMER
6
1
TEST TONE
INPUT ATT
5
4
CH SELECT
LEVEL
8
9
7
+10
EFFECT
DISPLAY
DISC
ENTER
0
DTV INFO
MPX/RETURN D.ACCESS T.EDIT/GUIDE
8
7
3
DTV ON/OFF DTV MENU
¶
BAND
CLASS
1
¡
4
¢
TOP MENU
AUDIO
SUB TITLE
ANGLE
REMOTE SETUP STANDARD
ADV.SURR.
STEREO
MUTE
MIDNIGHT/
LOUDNESS
INPUT SEL.
SIGNAL SEL
RECEIVER CONTROL
TUNE
T
ST
ST
ENTER
TUNE
CHANNEL
1
Press DVD or select it w ith the MULTI
JOG/INPUT SELECTOR dial (front panel).
2
Press SIGNAL SEL (SIGNAL SELECT)
repeatedly to select DVD 5.1ch/DVD 7.1ch.
To cancel playback from the multi-channel
inputs, use the SIGNAL SEL (SIGNAL SELECT)
button to select a different input signal.
•
When playback from the multi-channel
inputs is selected, you can’t use the INPUT
ATT, TONE, and MIDNIGHT/LOUDNESS
buttons, as well as the Standard,
Advanced Surround, and Stereo/Direct
sound modes.
37
En
XRB3013A.32.37
37
01.12.12, 4:44 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
06
Se t t in g u p t h e re ce ive r
3
Use } or ] to choose the option you
Ch o o sin g yo u r re ce ive r se t u p
w ant to adjust.
To ensure the best possible surround sound, be
sure to complete the following set up
It will be easiest to adjust each of the settings in
turn, following the order below (and on the
following pages). The current setting is shown
for each option as you cycle through the
display.
operations. This is particularly important when
using Dolby surround. You only need to make
these settings once (unless you change the
placement of your current speaker system or
add new speakers, etc.). Refer to the following
pages for details on each of the settings.
Speaker setting (page 39)
Specify the number and type of speakers
you have connected.
Surround back speaker setting (VSX-
D811S only) (page 40)
Specify your surround back speaker/
surround back subwoofer setup.
If you are using the Pioneer S-FCRW220
speaker system, you’ll have to set the
Crossover frequency to 200kHz. You can
leave the Speaker setting and the
Subwoofer setting in the default settings.
6.1 channel setting (VSX-D811S only)
(page 40)
Set when 6.1 channel decoding is used.
SOURCE
RECEIVER
Subw oofer setting (page 40)
Specify how the subwoofer is used.
DVD
RCV
TV
MULTI CONTROL
CD
TUN
VCR
CD-R
TVC
2
3
FL DIMMER
6
1
Crossover frequency setting (page 40)
Determine which frequencies will be sent
to the subwoofer (or large speakers).
TEST TONE
INPUT ATT
5
4
CH SELECT
LEVEL
8
9
7
+10
EFFECT
DISPLAY
DISC
ENTER
0
DTV INFO
MPX/RETURN D.ACCESS T.EDIT/GUIDE
8
7
CLASS
3
¶
BAND
DTV ON/OFF DTV MENU
LFE attenuator setting (page 41)
Specify the peak level for the LFE channel.
1
¡
4
¢
TOP MENU
AUDIO
SUB TITLE
ANGLE
REMOTE SETUP STANDARD
ADV.SURR.
STEREO
MUTE
MIDNIGHT/
LOUDNESS
INPUT SEL.
SIGNAL SEL
Front speaker distance setting (page 41)
Specify the distance from your listening
position to your front speakers.
RECEIVER CONTROL
T
ENTER
Center speaker distance setting (page
41)
CHANNEL
Specifies the distance from your listening
position to your center speaker.
1
on.
Press
RECEIVER to turn the pow er
Surround speaker distance setting (page
41)
The STANDBY indicator goes out.
Specify the distance from your listening
position to your surround speakers.
2
Press RCV.
Surround back speaker distance setting
(VSX-D811S only) (page 42)
Specifies the distance from your listening
position to your surround back speakers.
38
En
XRB3013A.38.44
38
01.12.12, 4:46 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Se t t in g u p t h e re ce ive r
06
Dynamic range control setting (page 42)
Compress the dynamic range of the sound
track.
Sp e a ke r se t t in g
•
Default setting: S (all speakers)
You must let the receiver know how many
speakers you have, and how big they are. The
size you choose (large or small) determines
how much bass is sent from the receiver to the
speakers.
Dual mono setting (page 42)
Isolate one channel when listening to discs
with dual mono encoding.
Component video input setting (page
42)
Specify the components to be assigned to
the component video inputs (below).
In the display, F, C, and S refer to front, center,
and surround speakers respectively. Speaker
size is denoted as L for large speakers, S for
small speakers, and (asterisk) if no speaker is
connected.
•
•
Component video 1 input setting
Component video 2 input setting
Surround back channel input setting
(VSX-D811S only) (page 43)
Specify the number of surround back
inputs you have connected.
•
•
If the cone size (diameter) of the speaker is
larger than 5 inches, set the speaker size
to L.
If you’re not using a subwoofer, we
Digital input settings (page 43)
recommend setting the front speakers to L.
Specify the components to be assigned to
the video and digital inputs (below).
•
Cycle through the available choices
using ’ or ‘ and choose a configuration
that matches your speaker setup.
•
•
•
•
Coaxial digital input 1 setting
Coaxial digital input 2 setting
Optical digital input 1 setting
One of the following configurations should
match your setup:
Optical digital input 2 setting (VSX-D811S
only)
FS-CS-SS
4
Use ’ or ‘ to adjust the setting.
The setting is entered automatically.
FS-CS-S
FS-C -SS
FL-CL-SL
FL-CL-SS
FL-CL-S
FL-C -SS
5
Repeat steps 3 and 4 to set other
surround modes.
FL-C -SL
FL-CS-S
6
When you’re done, press ENTER to exit.
FL-CS-SS
The setting display is automatically exited
after 20 seconds of inactivity.
FL-CS-SL
39
En
XRB3013A.38.44
39
01.12.12, 4:46 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
06
Se t t in g u p t h e re ce ive r
Su rro u n d b a ck sp e a ke r se t t in g
(VSX-D811S only)
Su b w o o fe r se t t in g
•
Default setting: ON
•
Default setting: S
You can choose whether the subwoofer is used
or not. Use the plus (PLS) setting for extra bass.
You must let the receiver know if surround back
speaker(s) have been connected, and how big
they are. The size you choose (large or small)
determines how much bass is sent from the
receiver to the speakers. If you have connected
a surround back subwoofer, you should select
the surround back subwoofer setting (SB
SUBWF) from the options. Choose (asterisk) if
no speaker is connected.
•
Use ’ or ‘ to select subw oofer ON, PLS
or OFF.
•
•
If you chose the small front speaker
setting, SUBWF ON is automatically set
and locked.
•
Use ’ or ‘ to select SB L, SB S, SB or
When you select the plus setting, you will
get the bass sounds from the subwoofer
even if the front speakers are set to L.
SB SUBWF.
6.1 ch a n n e l se t t in g
(VSX-D811S only)
Cro sso ve r fre q u e n cy se t t in g
•
Default setting: 6.1 FIX
•
Default setting: 100 Hz
You can have the receiver automatically switch
to Dolby Digital or DTS-ES decoding for 6.1
encoded sources (6.1 AUTO), or you can
choose to listen to other kinds of sources (for
example, 5.1 encoded material) with 6.1
encoding (6.1 FIX). With 5.1 encoded sources, a
surround back channel will be generated, but
the material may sound better in the 5.1 format
for which it was originally encoded.
Crossover frequency is the point where the
receiver divides the high and low sounds (the
frequencies) between the speakers. Since most
smaller speakers can’t handle deep bass tones,
you can send these sounds to the subwoofer (or
if you don’t have a subwoofer, the large (L)
speakers in your system) instead of the
speakers set to small (S) in your setup. Choose
the point at which you want the frequency
routed to the subwoofer (or L speakers).
•
Use ’ or ‘ to select 6.1 FIX or 6.1
We recommend setting this to 200 Hz if your S
speakers are smaller bookshelf-type speakers.
AUTO.
•
Use ’ or ‘ to specify the crossover
frequency for your small speakers (100 Hz,
150 Hz or 200 Hz).
•
•
If you chose SB in Surround back speaker
setting (above), you can’t set the 6.1
100Hz
150Hz
channel setting and
display.
shows in the
Refer to the table on page 33 to see how
the 6.1 channel setting affects sound
output from the surround back speakers.
200Hz
100 Hz
Sends bass frequencies below 100 Hz to
the subwoofer (or L speakers).
40
En
XRB3013A.38.44
40
01.12.12, 4:46 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Se t t in g u p t h e re ce ive r
06
150 Hz
Ce n t e r sp e a ke r d ist a n ce se t t in g
Sends bass frequencies below 150 Hz to
the subwoofer (or L speakers).
•
Default setting: 10 ft.
The center speaker is normally placed directly
in the front of the listening room and closer to
the listening position than the front speakers.
This means that the sound from the center
speaker will be heard before the front speakers.
To prevent this, set the center speaker distance
setting to delay the sound from the center
speaker so that the sound from the front and
center speakers will be heard at the same time.
200 Hz
Sends bass frequencies below 200 Hz to
the subwoofer (or L speakers).
If all speakers (front, center, and surround)
are set to L, the crossover frequency can’t
be set because there are no S speakers
•
Use ’ or ‘ to set the distance of the
(
appears in the display).
center speaker from the main listening
position (w ithin a 30 foot range).
LFE a t t e n u a t o r se t t in g
•
Default setting: 0 dB
When C is selected in the speaker setting,
the center speaker distance can’t be set.
Dolby Digital and DTS audio sources include
ultra-low bass tones. Set the LFE attenuator as
necessary to prevent the ultra-low bass tones
from distorting the sound from the speakers.
Su rro u n d sp e a ke r d ist a n ce se t -
t in g
•
Use ’ or ‘ to set the attenuation level
(0 dB, 10 dB or dB(∞)).
•
Default setting: 10 ft.
Like the center speaker, you should set the
distance of the surround speakers accurately to
hear sounds coming from both front and
surround speakers at the same time.
0 dB
10 dB
∞ (displays
)
•
Use ’ or ‘ to set the distance of the
surround speakers from the main listening
position (w ithin a 30 foot range).
When ∞ is selected ( appears in the
display), LFE is not available.
Fro n t sp e a ke r d ist a n ce se t t in g
When S is selected in the speaker setting,
the surround speaker distance can’t be
set.
•
Default setting: 10 ft.
Sets the distance from the front speakers to the
listening position.
•
Use ’ or ‘ to set the distance of the
front speakers from the main listening
position (w ithin a 30 foot range).
41
En
XRB3013A.38.44
41
01.12.12, 4:46 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
06
Se t t in g u p t h e re ce ive r
Su rro u n d b a ck sp e a ke r d ist a n ce
se t t in g
(VSX-D811S only)
Du a l m o n o se t t in g
•
Default setting: ch1
The dual mono setting can only be used when
listening to Dolby Digital discs with dual mono
encoding. These discs are not widely used, but
are sometimes used when it is necessary to
have one language on one channel and a
different language on the other. With this
setting you can choose which channel in the
dual mono setting you want to listen to.
•
Default setting: 10 ft.
Like the center speaker, you should set the
distance of the surround speakers accurately to
hear sounds coming from both front and
surround speakers at the same time.
•
Use ’ or ‘ to set the distance of the
If Dolby Digital mode is switched on, you will
hear the channel you have selected (either ch1
or ch2) through your center speaker. With Dolby
Digital mode off, or if you don’t have a center
speaker, you will hear the channel you have
selected through both front speakers. In the L
ch 1. R ch 2 setting, the left front speaker will
play channel 1 and the right front speaker will
play channel 2.
surround speakers from the main listening
position (w ithin a 30 foot range).
When SB is selected in the surround
speaker setting, the surround back
speaker distance can’t be set.
•
Use ’ or ‘ to cycle through the
Dyn a m ic ra n g e co n t ro l se t t in g
possible dual mono settings.
•
Default setting: OFF
Dynamic range is the difference between the
loudest and softest sounds in any given signal.
With this setting, you can compress the
L ch 1.R ch 2
dynamic range, so that low level sounds can be
heard more easily (sounding relatively louder)
yet louder sounds won’t be too overbearing.
ch2
ch1
Co m p o n e n t vid e o in p u t se t t in g s
Here you tell the receiver what components you
have hooked up to the component video jacks
on the back of the receiver.
•
Press ’ or ‘ to set the dynamic range
control (OFF, MAX, or MID).
Co m p o n e n t vid e o 1:
•
•
When the volume level is increased, set to
OFF.
•
Default settings: DVD
When listening at low volumes, set to
MAX for maximum dynamic range
compression.
1
Use ’ or ‘ to assign the component
video 1 input (DVD, TV, VCR or OFF).
•
Dynamic range control is effective only
when a Dolby Digital signal is being played
back.
Co m p o n e n t vid e o 2:
•
Default setting: TV
2
Use ’ or ‘ to assign the component
video 2 input (DVD, TV, VCR or OFF).
42
En
XRB3013A.38.44
42
01.12.12, 4:46 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Se t t in g u p t h e re ce ive r
Su rro u n d b a ck ch a n n e l in p u t
06
Op t ica l d ig it a l in p u t se t t in g s
Here you tell the receiver what components you
have hooked up to the optical DIGITAL IN
jack(s) on the back of the receiver.
se t t in g
(VSX-D811S only)
•
Default setting: SB 2ch IN
You only have to make this setting if you are
using a seperate component for decoding
DVDs, and the component has only one
surround back channel output. If this is the
case, select SB 1ch IN, otherwise leave it set to
SB 2ch IN.
Op t ica l d ig it a l 1:
•
Default settings: TV/SAT
1
Use ’ or ‘ to assign the optical digital
1 input (DVD, TV, CD, CD-R, VCR or OFF).
•
Use ’ or ‘ to select SB 2ch IN or
Op t ica l d ig it a l 2
(VSX-D811S only):
SB 1ch IN.
•
Default setting: CDR/TAPE/MD
Co a xia l d ig it a l in p u t se t t in g s
Here you tell the receiver what components you
have hooked up to the coaxial DIGITAL IN jacks
1 and 2 on the back of the receiver.
2
Use ’ or ‘ to assign the optical digital
2 input (DVD, TV, CD, CD-R, VCR or OFF).
After you assign a component to a digital jack,
whenever you select that component, (for
example, a DVD player) the receiver
Co a xia l d ig it a l 1:
automatically changes to the digital input
setting and DIGITAL shows in the display.
•
Default settings: DVD/LD
1
Use ’ or ‘ to assign the coaxial digital
1 input (DVD, TV, CD, CD-R, VCR or OFF).
Co a xia l d ig it a l 2:
•
Default setting: CD
2
Use ’ or ‘ to assign the coaxial digital
2 input (DVD, TV, CD, CD-R, VCR or OFF).
After you assign a component to a digital jack,
whenever you select that component, (for
example, a DVD player) the receiver
automatically changes to the digital input
setting and DIGITAL shows in the display.
43
En
XRB3013A.38.44
43
01.12.12, 4:46 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
06
Se t t in g u p t h e re ce ive r
Se t t in g t h e re la t ive vo lu m e le ve l
o f e a ch ch a n n e l
•
Default setting: 0db
SOURCE
RECEIVER
For best surround sound playback, you should
set the relative channel levels from the main
listening position. You can set seperate levels
for each surround mode.
DVD
RCV
TV
MULTI CONTROL
CD
TUN
VCR
CD-R
TVC
2
3
FL DIMMER
6
1
TEST TONE
INPUT ATT
5
4
CH SELECT
LEVEL
8
9
7
+10
EFFECT
DISPLAY
DISC
1
2
Press RCV.
ENTER
0
DTV INFO
MPX/RETURN D.ACCESS T.EDIT/GUIDE
8
7
CLASS
3
¶
BAND
DTV ON/OFF DTV MENU
Press TEST TONE to output the test
1
¡
4
¢
TOP MENU
AUDIO
SUB TITLE
ANGLE
tone.
REMOTE SETUP STANDARD
ADV.SURR.
STEREO
MUTE
The test tone is output in the following order
(depending on the speaker setting):
MIDNIGHT/
LOUDNESS
INPUT SEL.
SIGNAL SEL
RECEIVER CONTROL
TUNE
T
ST
ST
ENTER
FL
C
FR
TUNE
SR
CHANNEL
MENU
SW
SL
SB*
MASTER VOLUME
TV VOL
TV INPUT
TV
*VSX-D811S only
TV CONTROL
AV PRE-PROGRAMMED
REMOTE CONTROL UNIT
If you don’t hear a test tone from one of your
speakers, please refer to Speaker setting on
page 39 to make sure you have correctly
specified your speaker setup.
3
Press MASTER VOLUME +/– to adjust
the volume to an appropriate level.
•
•
Test tone is only output in Standard
modes.
4
Use LEVEL +/- to adjust the speaker
Since the subwoofer transmits an ultra-
low frequency its sound may seem
quieter than it actually is.
levels in turn.
You should hear the test tone at the same
volume from each speaker when seated in the
main listening position. The channel level range
is ± 10 dB.
5
When you’re done, press TEST TONE to
turn off the test tone.
The speaker volume can be adjusted without
outputting the test tone by pressing CH
SELECT and then using LEVEL +/–.
44
En
XRB3013A.38.44
44
01.12.12, 4:46 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Usin g t h e t u n e r
07
for about a second. The receiver will start
searching for the next station, stopping
when it has found one. Repeat to search
for other stations.
List e n in g t o t h e ra d io
The following steps show you how to tune in to
FM and AM radio broadcasts using the
automatic (search) and manual (step) tuning
functions. If you already know the frequency of
the station you want, see Tuning directly to a
station below. Once you are tuned to a station
you can memorize the frequency for recall
later—see Saving station presets on the next
page for more on how to do this.
Manual tuning
To change the frequency one step at a
time, press TUNE +/–.
High speed tuning
Press and hold TUNE +/– for high speed
tuning. Release the button at the
frequency you want.
SOURCE
RECEIVER
DVD
RCV
TV
MULTI CONTROL
CD
TUN
VCR
CD-R
TVC
Im p ro vin g FM st e re o so u n d
If the TUNED or STEREO indicators don't light
when tuning to an FM station because the
signal is weak, press the MPX(/RETURN)
button to switch the receiver into mono
reception mode. This should improve the sound
quality and allow you to enjoy the broadcast.
2
3
FL DIMMER
6
1
TEST TONE
INPUT ATT
5
4
CH SELECT
LEVEL
8
9
7
+10
EFFECT
DISPLAY
DISC
ENTER
0
DTV INFO
MPX/RETURN D.ACCESS T.EDIT/GUIDE
8
7
3
DTV ON/OFF DTV MENU
¶
BAND
CLASS
1
¡
4
¢
TOP MENU
AUDIO
SUB TITLE
ANGLE
REMOTE SETUP STANDARD
ADV.SURR.
STEREO
MUTE
MIDNIGHT/
LOUDNESS
INPUT SEL.
SIGNAL SEL
Tu n in g d ire ct ly t o a st a t io n
Sometimes, you'll already know the frequency of
the station you want to listen to. In this case,
you can simply enter the frequency directly
using the number buttons on the remote
control.
RECEIVER CONTROL
TUNE
T
ST
ST
ENTER
TUNE
CHANNEL
1
Press the TUN button on the remote
1
Press the TUN button on the remote
control to select the tuner.
You can also use the MULTI JOG/INPUT
SELECTOR dial on the front panel.
control to select the tuner.
You can also use the MULTI JOG/INPUT
SELECTOR dial on the front panel.
2
Use the BAND button to change the
2
Use the BAND button to change the
band (FM or AM), if necessary.
Each press switches the band between FM and
AM.
band (FM or AM), if necessary.
Each press switches the band between FM and
AM.
3
4
Press D.ACCESS (Direct Access).
3
Tune to a station.
Use the number buttons to enter the
There are three ways to do this:
frequency of the radio station.
For example, to tune to 106.00 (FM), press 1, 0,
6, 0, 0.
Automatic tuning
To search for stations in the currently
selected band, press and hold TUNE +/–
45
En
XRB3013A.45.48
45
01.12.12, 4:48 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
07
Usin g t h e t u n e r
STEREO TUNED
SP
A
SOURCE
RECEIVER
FM
106.00
DVD
RCV
TV
MULTI CONTROL
CD
TUN
VCR
CD-R
TVC
If you make a mistake halfway through, press
D.ACCESS twice to cancel the frequency and
start over.
2
3
FL DIMMER
6
1
TEST TONE
INPUT ATT
5
4
CH SELECT
LEVEL
8
9
7
+10
EFFECT
DISPLAY
DISC
ENTER
0
DTV INFO
MPX/RETURN D.ACCESS T.EDIT/GUIDE
8
7
3
DTV ON/OFF DTV MENU
¶
BAND
CLASS
Sa vin g st a t io n p re se t s
1
¡
4
¢
TOP MENU
AUDIO
SUB TITLE
ANGLE
If you often listen to a particular radio station,
it's convenient to have the receiver store the
frequency for easy recall whenever you want to
listen to that station. This saves the effort of
manually tuning in each time. This unit can
memorize up to 30 stations, stored in three
banks, or classes, (A, B and C) of 10 stations
each. When saving an FM frequency, the MPX
setting (see previous page) is also stored. Use
the front panel controls to store station presets.
REMOTE SETUP STANDARD
ADV.SURR.
STEREO
MUTE
MIDNIGHT/
LOUDNESS
INPUT SEL.
SIGNAL SEL
RECEIVER CONTROL
TUNE
T
ST
ST
ENTER
TUNE
CHANNEL
1
Tune to a station you w ant to memo-
rize.
See Listening to the radio (previous page) for
AUDIO/VIDEO MULTI-CHANNEL RECEIVER N∫m-Û≥,,
more on this.
INPUT
SELECTOR
MULTI JOG
ENTER
2
Press T.EDIT (TUNER EDIT).
The display shows ST. MEMORY, then a
MASTER VOLUME
blinking memory class.
SIGNAL
SELECT
MIDNIGHT/
LOUDNESS SPEAKERS
MONITOR
TONE
QUICK SETUP
DOWN
UP
MULTI JOG
VIDEO INPUT
STEREO TUNED
DIGITAL IN
S-VIDEO
VIDEO
L
AUDIO
R
A
SP
R
A -
99.50
3
Press CLASS to select one of the three
classes then press ST +/– (STATION +/–) to
select the station preset you w ant.
You can also use the the MULTI JOG/INPUT
SELECTOR dial (front panel) to select a station
preset.
ADVANCED
STANDARD SURROUND
STEREO/
DIRECT
SIGNAL
SELECT
MIDNIGHT/
LOUDNESS SPEAKERS
MONITOR
TONE
QUICK SETUP
STATION
TUNING
MULTI JOG
LISTENING MODE
VIDEO INPUT
TUNER EDIT
MULTI JOG
CLASS
BAND
MPX
INPUT ATT FL DIMMER
S-VIDEO
VIDEO
L
AUDIO
R
4
Press ENTER.
After pressing ENTER, the preset class and
number stop blinking and the receiver stores
the station.
46
En
XRB3013A.45.48
46
01.12.12, 4:48 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Usin g t h e t u n e r
07
Na m in g st a t io n p re se t s
For easier identification, you can name your
station presets.
List e n in g t o st a t io n p re se t s
Having stored up to 30 stations (see previous
page), preset stations can be easily recalled.
1
Choose the station preset you w ant to
1
Press TUN (remote) or use the MULTI
name.
JOG/INPUT SELECTOR dial on the front
panel to select the tuner.
See Listening to station presets (this page) for
how to do this.
2
Press CLASS to select the class in w hich
the station is stored.
Press repeatedly to cycle through classes A, B
and C.
2
Press T.EDIT (TUNER EDIT).
The display shows ST. NAME, then a blinking
cursor at the first character position.
3
Press ST +/– (STATION +/–) to select the
3
Input the name you w ant.
station preset you w ant.
Names can be up to four characters long.
•
Use the MULTI JOG/INPUT SELECTOR dial
(front panel) or the ST +/- buttons (remote)
to select characters.
•
If the receiver is left disconnected from the
AC power outlet for an extended period,
the station memories will be lost and will
have to be reprogrammed.
•
•
Press ENTER to confirm a character. If no
character is input, a space is input.
The name is stored when ENTER is
pressed after choosing the fourth
character.
To erase a station name, simply repeat steps
1-3 and input four spaces instead of a
name.
Once you have named a station preset, you
can press DISPLAY when listening to a
station to switch the display between the
name and the frequency.
47
En
XRB3013A.45.48
47
01.12.12, 4:48 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
08
Ma kin g Re co rd in g s
automatically—check the component’s
instruction manual if you’re unsure.
Ma kin g a n a u d io o r a vid e o
re co rd in g
You can make an audio or a video recording
from the built-in tuner, or from an audio or video
source connected to the receiver (such as a CD
player or TV).
5
Start recording, then start playback of
the source component.
SOURCE
RECEIVER
Keep in mind you can’t make a digital recording
from an analog source or vice-versa, so make
sure the components you are recording to/from
are hooked up in the same way (see pages 13–
19 for more on connections).
DVD
RCV
TV
MULTI CONTROL
CD
TUN
VCR
CD-R
TVC
2
3
FL DIMMER
6
1
TEST TONE
INPUT ATT
5
4
CH SELECT
LEVEL
8
9
7
If you want to record a video source, you also
need use the same type of connection for the
source as for the recorder. For example, you
can’t record a component hooked up to S-video
jacks with a recorder hooked up to the compo-
nent video outputs (see page 18 for more on
video connections).
+10
EFFECT
DISPLAY
DISC
ENTER
0
DTV INFO
MPX/RETURN D.ACCESS T.EDIT/GUIDE
8
7
3
DTV ON/OFF DTV MENU
¶
BAND
CLASS
1
¡
4
¢
TOP MENU
AUDIO
SUB TITLE
ANGLE
REMOTE SETUP STANDARD
ADV.SURR.
STEREO
MUTE
MIDNIGHT/
LOUDNESS
INPUT SEL.
SIGNAL SEL
RECEIVER CONTROL
TUNE
T
ST
ST
ENTER
TUNE
CHANNEL
The receiver's volume, balance, tone (bass,
treble, loudness), and surround effects
have no effect on the recorded signal.
Mo n it o rin g yo u r re co rd in g
1
Select the source you w ant to record.
You can listen to (monitor) the recording as it's
being made using the MONITOR button on the
front panel (a cassette deck would have to have
a record monitor function).
Use the MULTI CONTROL buttons on the
remote (or MULTI JOG/INPUT SELECTOR dial
on the front panel).
2
Select the input signal (if necessary).
•
Press the MONITOR button to sw itch
Press SIGNAL SEL (SIGNAL SELECT) to select
the input signal corresponding to the source
component (see page 34 for more on this).
betw een the recorded signal and the
original source signal.
3
Prepare the source you w ant to record.
Tune to the radio station, load the CD, video,
DVD etc.
4
Prepare the recorder.
Insert a blank tape, MD, video etc. into the
recording device and set the recording levels.
Refer to the instructions that came with the
recorder if you are unsure how to do this. Most
video recorders set the audio recording level
48
En
XRB3013A.45.48
48
01.12.12, 4:48 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Co n t ro llin g t h e re st o f yo u r syst e m
09
Se t t in g t h e re m o t e t o co n t ro l
o t h e r co m p o n e n t s
Se le ct in g p re se t co d e s
d ire ct ly
There are several ways to set your remote to
control the other components in your system.
The easiest way to do this is to assign the
component’s manufacturer preset code (listed
on pages 56–67) to one of the MULTI CONTROL
buttons on the remote control.
SOURCE
RECEIVER
DVD
RCV
TV
MULTI CONTROL
CD
TUN
VCR
CD-R
TVC
2
3
FL DIMMER
6
1
TEST TONE
INPUT ATT
The buttons can be set to control the following
components:
5
4
CH SELECT
LEVEL
8
9
7
+10
EFFECT
DISPLAY
DISC
ENTER
0
DTV INFO
MPX/RETURN D.ACCESS T.EDIT/GUIDE
8
7
CLASS
3
¶
BAND
DTV ON/OFF DTV MENU
1
¡
4
¢
Button Controllable Components
TOP MENU
AUDIO
SUB TITLE
ANGLE
REMOTE SETUP STANDARD
ADV.SURR.
STEREO
MUTE
DVD: DVD or LD player
MIDNIGHT/
LOUDNESS
INPUT SEL.
SIGNAL SEL
TV:
VCR:
CD:
TV or Satellite tuner
VCR or Digital Video Recorder
CD player
RECEIVER CONTROL
TUNE
T
ST
ST
ENTER
CD-R: CD Recorder, Tape deck
TUNE
or MD player
CHANNEL
TVC:
TUN:
TV or Cable TV tuner
FM/AM tuner
1
Press and hold REMOTE SETUP for three
seconds.
You can do this directly, or by searching
through different preset codes until you find the
right one. If you can’t find a preset code that
matches the component you want to control,
you can still teach the remote individual
commands from another remote control (page
50).
The LED lights steadily for two seconds.
2
Press the MULTI CONTROL button for
the component you w ant to control.
3
Use the number buttons to enter the 4
digit preset code (see pages 56–67)
The LED blinks for half a second after you input
each digit and shows a long, two second blink
once you have entered a valid code. If the LED
blinks three times it means an invalid code has
been input or an error has occurred.
You can cancel or exit any of the steps by
pressing and holding MUTE for three seconds.
•
If you assign a preset code for the TUNER
button, you won’t be able to control the
built-in tuner of this receiver using the
remote. Reset the remote to the built-in
tuner by entering the preset code 7008.
4
Repeat steps 1 through 3 for the other
components you w ant to control.
49
En
XRB3013A.49.67
49
01.12.12, 4:48 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
09
Co n t ro llin g t h e re st o f yo u r syst e m
5
Sw itch the component back on or
Se a rch in g fo r p re se t co d e s
restart playback.
Another way of entering preset codes is to use
the search feature. The remote transmits
batches of 10 codes; when you see the
component you want to control respond (by
turning on or off), you just scan through the last
10 codes until you find the right one.
6
Use ’ and ‘ to scan through the last
10 codes transmitted to identify the correct
code.
Stop when you see the component stop or
switch off. The LCD display on the remote
shows the I.D.
You can also verify you have the correct code by
adjusting the volume, pressing 3, 7, etc.
SOURCE
RECEIVER
DVD
RCV
TV
MULTI CONTROL
CD
TUN
VCR
CD-R
TVC
7
Press and hold ENTER for three seconds
to save the preset code.
2
3
FL DIMMER
6
1
TESTTONE
INPUT ATT
5
4
CH SELECT
LEVEL
Pro g ra m m in g sig n a ls fro m
o t h e r re m o t e co n t ro ls
(VSX-D811S only)
8
9
7
+10
EFFECT
DISPLAY
DISC
ENTER
0
DTV INFO
MPX/RETURN D.ACCESS T.EDIT/GUIDE
8
7
CLASS
3
¶
BAND
DTV ON/OFF DTV MENU
1
¡
4
¢
TOP MENU
AUDIO
SUBTITLE
ANGLE
If the preset code for your component is not
available, or the available preset codes do not
operate correctly, you can program signals from
the remote control of another component. This
can also be used to program additional
operations (buttons not covered in the presets)
after assigning a preset code.
REMOTE SETUP STANDARD
ADV.SURR.
STEREO
MUTE
MIDNIGHT/
LOUDNESS
INPUT SEL.
SIGNAL SEL
RECEIVER CONTROL
TUNE
T
ST
ST
ENTER
TUNE
CHANNEL
1
Press REMOTE SETUP and hold for three
seconds.
1
Sw itch on the component you w ant to
The LED lights steadily for two seconds.
control.
If the component is some kind of player (CD
player, VCR, etc.), start it playing.
2
Press the MULTI CONTROL button for
the component you w ant to control.
2
Press and hold REMOTE SETUP for three
3
Prepare the remote to learn the remote
seconds.
control signal from the component.
Press and hold the RECEIVER button for two
seconds.
The LED lights steadily for two seconds.
3
Press the MULTI CONTROL button for
The LED lights steadily to indicate the remote is
ready accept a signal.
the component you w ant to control.
4
Press and hold REMOTE SETUP for three
seconds.
A batch of 10 codes is transmitted and the LED
blinks during transmission. If the component
responds, by stopping or switching off, go to the
next step, otherwise repeat this step.
To exit or cancel press and hold the REMOTE
SETUP key for three seconds.
50
En
XRB3013A.49.67
50
01.12.12, 4:48 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Co n t ro llin g t h e re st o f yo u r syst e m
09
4
Point the tw o remote controls tow ards
•
TV CONTROL buttons (TV , TV VOL +/-,
and TV INPUT) can only be learned after
selecting TV or TVC.
each other about 1-2 inches apart then
press the button that w ill be doing the
learning on this receiver’s remote control
(for example 3, 7, etc.).
The LED flashes rapidly.
Era sin g o n e o f t h e re m o t e
co n t ro l b u t t o n se t t in g s
(VSX-D811S only)
1 - 2 inches
This erases one of the buttons you have
programmed and restores the button to the
factory default.
5
Press the corresponding button on the
other remote control that is sending
(teaching) the signal to this receiver’s
remote control (for example 3, 7, etc.).
If the operation has been learned successfully,
the LED on this receiver’s remote will go out
and then light steadily.
1
Press REMOTE SETUP and hold for three
seconds.
The LED lights steadily for two seconds.
2
Press the MULTI CONTROL button
If for some reason the operation hasn’t been
learned the LED will blink for three seconds and
then light steadily. If this happens, keep
pressing the (teaching) button as you vary the
distance between the two remotes, until you
see the the LED light steadily.
relating to the button setting to be erased.
3
Prepare the remote to erase the button
setting.
Press the RECEIVER button twice quickly.
The LED blinks to indicate the remote is ready
to erase the button setting.
To program additional operations for the current
component repeat steps 4 and 5.
4
Press and hold the button to be erased
To program operations for another component
exit and repeat steps 1 through 5.
for three seconds.
The LED lights steadily for three seconds and
then goes off.
6
Press and hold the REMOTE SETUP
button for three seconds to store the
operation(s).
5
6
Repeat step 4 to erase other buttons.
Press and hold the REMOTE SETUP
button for tw o seconds to exit.
•
•
Some commands from other remote
controls cannot be learned, but in most
cases the remotes just need to be moved
closer together or farther apart.
Cle a rin g a ll t h e re m o t e
co n t ro l se t t in g s
You can clear all presets and restore the factory
default settings.
Certain buttons represent operations that
cannot be learned from other remote
1
Press REMOTE SETUP and hold for three
controls. These include: RECEIVER
REMOTE SETUP and the MULTI
CONTROL, RECEIVER CONTROL and
,
seconds.
The LED lights steadily for two seconds.
MASTER VOLUME buttons.
51
En
XRB3013A.49.67
51
01.12.12, 4:49 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
09
Co n t ro llin g t h e re st o f yo u r syst e m
2
Press any MULTI CONTROL button then
Co n firm in g p re se t co d e s
use the number buttons to enter 0123.
The LED lights for two seconds to indicate that
the settings have been restored to the factory
presets. (If the LED blinks three times, then you
made a mistake with the code—try re-entering
it.)
Use this feature to check which preset code is
assigned to a MULTI CONTROL button.
1
Press REMOTE SETUP and hold for three
seconds.
The LED lights steadily for two seconds.
2
Press the MULTI CONTROL button of the
Dire ct fu n ct io n
component for w hich you w ant to check the
preset code.
•
Default setting: ON
You can use the direct function feature to
control one component using the remote
control while at the same time, using your
receiver to playback a different component. This
could let you, for example, use the remote
control to set up and listen to a CD on the
receiver and then use the remote control to
rewind a tape in your VCR while you continue to
listen to your CD player.
3
Press and hold ENTER for tw o seconds.
Each preset code consists of four digits, for
example 1329. Each digit will be represented by
a series of blinks on the remote’s LED—3 blinks
to represent the digit “3”, etc. (“0” is
represented by 10 blinks)
When direct function is on, any component you
select (using the MULTI CONTROL buttons )
will be selected by both the receiver and the
remote control. When you turn direct function
off, you can operate the remote control without
affecting the receiver.
1
Press REMOTE SETUP and hold for three
seconds.
The LED lights steadily for two seconds.
2
Press the MULTI CONTROL button for
the component you w ant to control.
3
Use the number buttons to enter either
9990 (direct on) or 9995 (direct off).
The LED will light for two seconds to indicate
that it’s been correctly set. (If the LED blinks
three times, then there was a mistake with the
code—repeat steps 1-4.)
You can’t use direct function for TV INPUT.
52
En
XRB3013A.49.67
52
01.12.12, 4:49 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Co n t ro llin g t h e re st o f yo u r syst e m
09
Co n t ro ls fo r TVs
This remote control can control components after entering the proper codes or teaching the
receiver the commands (see pages 56–67). Use the MULTI CONTROL buttons to select the
component.
Button (s)
TV
Function
Switches the DTV on or off.
Switches the TV or CATV between standby and on.
Components
DTV
Cable TV/Satellite TV/TV
TV
TV INPUT Switches the TV input. (Not possible with all models.)
CHANNEL Selects channels.
+/–
Cable TV/Satellite TV/TV/
DTV
TV VOL
+/–
Adjust the TV volume.
Cable TV/Satellite TV/TV/
DTV
SOURCE
Press to switch the component assigned to the TVC
DTV
button on or off.
4
¢
8
Switches DTV on or off.
DTV
DTV
DTV
DTV
DTV
DTV
DTV
Press to display the DTV menu.
Use as the GUIDE button for navigating
Press to get information on DTV programs.
¶
TOP MENU Use to choose the BLUE commands on a DTV menu.
AUDIO Use to choose the GREEN commands on a DTV menu.
SUB TITLE Use to choose the RED commands on a DTV menu.
ANGLE
¡
Use to choose the YELLOW commands on a DTV menu. DTV
Selects between screen formats for widescreen TVs.
TV
1
Use to clear a TV channel selected using the number
buttons.
Cable TV/TV
3
7
Use to switch DTV audio tracks
DTV
DTV
Use to select closed captioning with DTV.
Use to select a specific TV channel.
Number
Buttons
Cable TV/Satellite TV/TV/
DTV
+10 button Use to add a decimal point when selecting a specific TV DTV
channel.
ENTER/
DISPLAY/
DISC
Use to enter a channel.
Cable TV/Satellite TV/TV
53
En
XRB3013A.49.67
53
01.12.12, 4:49 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
09
Co n t ro llin g t h e re st o f yo u r syst e m
Button (s)
MENU
Function
Components
Select different menus from the DTV functions.
DTV
Select the menu screen.
Cable TV/Satellite TV/TV
}]’‘ & Select or adjust and navigate items on the menu screen. DTV
ENTER
ENTER brings up the DTV menus.
Press to select or adjust and navigate items on the menu Cable TV/Satellite TV/TV/
screen.
DTV
EFFECT
+/–
For TV and cable TV use this button to immediately enter Cable TV/Satellite TV/TV/
a new channel (CHANNEL ENTER function). For satellite
TV use this button to exit the menu screen.
DTV
The four TV CONTROL buttons on the remote control are dedicated to control the TV assigned to
the TVC button. Thus if you only have one TV to hook up to this system assign it to the TVC
MULTI CONTROL button. If you have two TVs, assign the main TV to the TVC button.
Co n t ro ls fo r o t h e r co m p o n e n t s
This remote control can control these components after entering the proper codes or teaching the
receiver the commands (see pages 56–67). Use the MULTI CONTROL buttons to select the
component.
Button (s)
SOURCE
Function
Components
Press to switch the component between standby and on. CD/MD/CD-R/VCR/DVD/LD/
DVR player/Cassette deck
4
Press to return to the start of the current track.
CD/MD/CD-R/DVD/LD player
Repeated presses skips to the start of previous tracks.
Go back channels (channel –).
VCR/DVR
Play the reverse side of the tape on a reversible deck.
Cassette deck
¢
Press to advance to the start of the next track.
CD/MD/CD-R/LD player
Repeated presses skips to the start of following tracks.
Go forward channels (channel +).
VCR
Play the forward side of the tape on a reversible deck.
Pause playback or recording.
Cassette deck
8
CD/MD/CD-R/VCR/DVD/LD/
DVR player/Cassette deck
3
Start playback.
CD/MD/CD-R/VCR/DVD/LD/
DVR player/Cassette deck
54
En
XRB3013A.49.67
54
01.12.12, 5:24 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Co n t ro llin g t h e re st o f yo u r syst e m
09
Button (s)
Function
Components
¡
Hold down for fast forward playback.
CD/MD/CD-R/VCR/DVD/LD/
DVR player/Cassette deck
1
7
Hold down for fast reverse playback.
CD/MD/CD-R/VCR/DVD/LD/
DVR player/Cassette deck
Stops playback (on some models, pressing this when the CD/MD/CD-R/VCR/DVD/LD/
disc is already stopped will cause the disc tray to open).
DVR player/Cassette deck
¶
Starts recording. To prevent accidental recording, this
button must be pressed twice to take effect (the second
press must be within 10 seconds of the first).
VCR/DVR player
Number
buttons
Directly access tracks on a program source.
CD/MD/CD-R/VCR/LD player
DVD/DVR player
Use the number buttons to navigate the on-screen
display.
+10 button Selects tracks higher than 10. (For example, press +10
CD/MD/CD-R/VCR/LD player
then 3 to select track 13.)
ENTER
Chooses the disc.
Multiple CD player
MD player
(DISPLAY/ Ejects the disc.
DISC)
Use as the ENTER button.
VCR
Displays the setup screen for DVD/DVR players.
Changes sides of the LD.
DVD/DVR player
LD player
MENU
Displays menus concerning the current DVD or DVR you DVD/DVR player
are using.
’
Pauses the tape.
CD-R/Cassette deck
CD-R/Cassette deck
CD-R/Cassette deck
CD-R/Cassette deck
DVD/DVR Player
‘
Stops the tape.
ENTER
}/]
Starts playback.
Fast rewinds/fast forwards the tape.
}]’‘ & Navigates DVD menu/options.
ENTER
CHANNEL Selects channels.
VCR/DVD/DVR Player
CD/MD/CD-R/Cassette deck
DVD/DVR Player
+/–
TOP MENU Displays the disc ‘top’ menu of a DVD.
AUDIO Changes the audio language or channel.
SUBTITLE Displays/changes the subtitles on multilingual DVDs.
Selects tracks.
DVD/DVR Player
DVD/DVR Player
ANGLE
Switches camera angles on discs with multi-angle scenes. DVD/DVR Player
55
En
XRB3013A.49.67
55
01.12.12, 4:49 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
09
Co n t ro llin g t h e re st o f yo u r syst e m
Pre se t Co d e List
You can only set these codes for the buttons that assigned to the respective components. So, for
example, the TV codes can only be set to the TV or TVC button.
AMPLIVISION
AMPRO
1079
1126
TV
TVC
TV
AMSTRAD
ANITECH
AOC
ARCAM
ASBERG
ASUKA
ATLANTIC
AUDIOSONIC
AUDIOVOX
AUTOVOX
1006, 1017, 1103, 1105
1006, 1029, 1036
1011, 1013
1078, 1079
1036
Manufacturer
PHILIPS
Code
1008, 1017, 1020, 1025, 1104,
1115
1001, 1007, 1016
1023, 1054, 1055, 1075, 1076,
1082, 1087, 1121, 1124
1015, 1016, 1027, 1031, 1050,
1051, 1085
1005, 1026, 1034, 1038, 1042,
1046, 1075, 1097
1016, 1019, 1041, 1056, 1124
1006, 1011, 1013, 1017, 1026,
1027, 1039, 1062, 1079, 1089,
1092, 1102
1005, 1017, 1033, 1046, 1065,
1084, 1091
1011, 1016, 1041, 1045, 1049,
1062, 1114
1002, 1011, 1013, 1017, 1019,
1026, 1046, 1062, 1079, 1092
1066, 1068, 1071, 1075, 1115
1008, 1017
1016, 1024, 1030, 1053, 1065,
1067, 1103, 1122
1006, 1011, 1017, 1019, 1028,
1040, 1050, 1104, 1110, 1118,
1119
1017, 1063, 1083, 1095, 1098,
1099, 1112
1017, 1052, 1066, 1068, 1071,
1075, 1115
1041, 1055, 1075, 1112
1014, 1079
1040
SONY
PANASONIC
1080
1073
TOSHIBA
1017, 1046
1040, 1064, 1110 , 1118
1036, 1073
TELEFUNKEN
BANG & OLUFSEN 1116
SHARP
SAMSUNG
BASIC LINE
BAYSONIC
BAUR
1006, 1080
1064
1007, 1017, 1114, 1115
1102
1011
1009, 1050
1017
1079
1080
1090
1086
1079
1090
1095
1064
BEKO
FERGUSON
MITSUBISHI
GOLDSTAR
BELCOR
BELL & HOWELL
BEON
BINATONE
BLUE SKY
BLUE STAR
BONDSTEC
BOOTS
BLAUPUNKT
RADIOLA
JVC
BPL
BSR
DAEWOO
BRADFORD
BRANDT
BRITANNIA
BROCKWOOD
BROKSONIC
BTC
1046, 1069, 1070, 1072
1078
1011
1083, 1112
ORION
SIEMENS
1080
BUSH
1006, 1016, 1017, 1080, 1090,
1095, 1103, 1104
1013, 1026
1013
1016
1025, 1058
1006
1017
1075
1017
1001
1017
ADMIRAL
ADYSON
AIKO
CANDLE
CARNIVALE
CARREFOUR
CARVER
CASCADE
CATHAY
CENTURY
CENTURION
CELEBRITY
CCE
AKAI
1013, 1074
1080, 1089
1006
1063, 1078
1006, 1016, 1017, 1080, 1103
1095
1004, 1006, 1029, 1054, 1064,
1087, 1108
AKURA
ACURA
ALARON
ALBA
ALLORGAN
ANAM
ANAM NATIONAL 1054, 1087, 1108
AMBASSADOR 1061
AMERICA ACTION 1064
CGE
CIMLINE
1034, 1036, 1038, 1086, 1097
1006
56
En
XRB3013A.49.67
56
01.12.12, 4:49 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Co n t ro llin g t h e re st o f yo u r syst e m
09
CINERAL
CITIZEN
CLARIVOX
CLATRONIC
CME
CONCERTO
CONDOR
CONTEC
1040, 1110
1013, 1019, 1026, 1027, 1040
1017
1036, 1086, 1102
1007, 1015, 1114
1026
FRONTECH
FUJITSU
FUNAI
1055, 1086, 1089, 1109
1032, 1063, 1073
1059, 1063, 1064, 1089, 1095,
1096
FUTURETECH
GE
1064
1012, 1022, 1023, 1041, 1062,
1090, 1110, 1129, 1131
1017, 1020, 1032, 1072, 1079
1098, 1102
1006, 1016, 1064, 1078
GEC
CONTINENTAL EDISON 1069, 1070, 1072
GELOSO
1006, 1075
CRAIG
CROSLEY
CROWN
1054
GENEXXA
GIBRALTER
GOODMANS
1055, 1080
1010, 1011, 1013
1016, 1017, 1032, 1079, 1103,
1104
1025, 1034, 1036, 1038, 1075
1006, 1017, 1019, 1036, 1064,
1102, 1106
CRYSTAL
CS ELECTRONICS 1078
1109
GORENJE
GPM
1102
1080
CTC
1086
GRAETZ
GRANADA
1055
CURTIS MATHES
1009, 1013, 1019, 1022, 1023,
1017, 1032, 1048, 1074, 1079,
1025, 1026, 1027, 1041, 1047,
1100
1050, 1057, 1110, 1113, 1129,
1131
1080
1064
GRADIENTE
GRANDIN
GRUNDIG
GRUNPY
1024, 1026, 1058
1090
1031, 1066, 1068, 1072, 1115
1063, 1064
CYBERTRON
CXC
DAINICHI
DANSAI
DAYTRON
DECCA
DE GRAAF
DENON
DIXI
DUAL TEC
DUMONT
DWIN
1077, 1080
1017
1006, 1011
1017, 1032
1074
1047
1006, 1017
1079
HALLMARK
HANSEATIC
HARLEY DAVIDSON 1063
HARVARD
HARMAN/KARDON 1025
1062
1017, 1098
1029, 1064
HCM
1006, 1090, 1105
1006, 1016, 1017, 1080
1090, 1111
1014, 1016, 1018, 1020, 1021,
HINARI
HISAWA
HITACHI
1010, 1011, 1031
1125, 1127
1026, 1044, 1046, 1047, 1055,
ECE
1017
1069, 1070, 1079, 1081, 1097
ELBE
ELECTROBAND
ELIN
1088
1001
1017
HUANYU
HYPSON
ICE
1078, 1104
1017, 1089, 1090
1079, 1089, 1103
ELITE
1080, 1098
ICES
1080
ELTA
1006
IMPERIAL
1034, 1036, 1038, 1086, 1102,
EMERSON
1011, 1018, 1019, 1050, 1061,
1106
1062, 1063, 1064, 1075, 1083,
1090, 1112, 1118, 1119
1013
1008, 1017
INDIANA
INFINITY
INGELEN
INNO HIT
INNOVA
1017
1025
1055
1032
ENVISION
ERRES
ETRON
1006, 1120
1017
EXPERT
FIDELITY
FINLANDIA
FINLUX
FISHER
FLINT
1073
1078
1074
INTEQ
1010
1029
INTERBUY
INTERFUNK
INTERVISION
1017, 1055, 1086, 1114
1017, 1029, 1043
1079, 1089
1080
1103
1055
1017, 1031, 1032 , 1044
1050, 1074, 1079, 1096, 1102
1111
1017, 1075, 1098
1041
ISUKAI
ITS
ITT
FORMENTI
FORTRESS
57
En
XRB3013A.49.67
57
01.12.12, 4:49 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
09
Co n t ro llin g t h e re st o f yo u r syst e m
JBL
JCB
KAISUI
KAMP
KAPSCH
KAWASHO
KEC
KENDO
KNEISSEL
KENWOOD
KINGSLEY
KONIG
KORPEL
KOYODA
KTV
LEYCO
LG
LIESENK&TTER
LLOYTRON
LOEWE
LOGIK
LUMA
LUXMAN
LXI
1025
1001
NAD
NEC
NECKERMANN
NEI
NETSAT
NICAMAGIC
NIKKAI
1051, 1057, 1062
1011, 1013, 1016, 1026, 1058
1017, 1066, 1075, 1115
1017, 1109
1017
1078
1014, 1015, 1017, 1032, 1078,
1080, 1089
1013, 1040, 1062
1036, 1043
1046, 1069, 1070, 1075, 1091
1040
1055, 1077
1064
1050, 1057, 1087
1041, 1056
1014, 1032, 1079, 1080, 1089,
1105
1080
1006, 1078, 1079, 1080, 1090,
1078
1055, 1073
1078
1064
1017
1088
1011, 1013
1078
1114
1017
1006
1013, 1019, 1064
1017, 1032, 1089, 1095
1026
1017
1014
1035, 1114
1009
1073
NIKKO
NOBLIKO
NORDMENDE
NTC
OCEANIC
ONWA
OPTIMUS
OPTONICA
OSAKI
OSO
OSUME
OTTO
1014, 1032, 1052
1007, 1114
1007, 1016, 1017, 1066, 1075,
1079, 1098, 1115
1102, 1106
OTTO VERSAND
1026
PALLADIUM
PANAMA
PATHE MARCONI
PATHE CINEMA
PAUSA
1022, 1025, 1050, 1051, 1062
1006, 1017, 1029, 1044, 1046,
1055, 1079, 1091, 1104
1013, 1016, 1025, 1063
1043, 1086
1036, 1043, 1075
1009
1079, 1089, 1098
1013, 1017, 1025
1017
1006, 1015, 1016, 1017, 1032,
1074, 1079, 1095, 1103
1087
1020
1008, 1017
1079, 1089
M ELECTRONIC
1069, 1070, 1072
1075, 1078, 1084, 1098
1006
1003, 1011, 1012, 1013, 1019,
1022, 1023, 1026, 1027, 1051,
1062, 1131
1098
1078
1014
1011, 1013, 1025, 1034, 1036,
1038, 1047, 1075, 1086, 1112
1008, 1017
1011, 1013, 1019
1011, 1019, 1040
1023
1006, 1037
1099
1022
1006, 1017, 1043, 1079, 1086,
1089, 1106, 1109
1062, 1113
1010, 1011
1008
1023, 1056, 1087
1007, 1017, 1031, 1034, 1038,
1071, 1075, 1097, 1114, 1115
1016
MAGNAVOX
MAGNADYNE
MAGNAFON
MAJESTIC
MANESTH
MARANTZ
MARK
PENNEY
PERDIO
PHAPSODY
PHASE
MATSUI
PHILCO
MATSUSHITA
MCMICHAEL
MEDIATOR
MEGATRON
MEMOREX
PHONOLA
PILOT
PORTLAND
PRISM
PROFEX
PROLINE
PROSOCAN
PROTECH
1047, 1062
1006, 1009, 1026, 1049, 1050,
1062, 1087, 1112
1075
1011, 1013, 1049, 1062
1010, 1019, 1022, 1023
1031, 1115
METZ
MGA
MIDLAND
MINERVA
MINOKA
MINUTZ
MIVAR
MOTION
MOTOROLA
MTC
PROTON
PULSAR
PYE
QUASAR
QUELLE
1105
1012
1078, 1092, 1093, 1094
1036
1041
1011, 1013, 1026, 1027, 1078,
1114
1006, 1036, 1043, 1064, 1078
QUESTA
R-LINE
1017
MULTITECH
58
En
XRB3013A.49.67
58
01.12.12, 4:49 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Co n t ro llin g t h e re st o f yo u r syst e m
09
RANK ARENA
RBM
RCA
1016
1031
SOUNDWAVE
SQUAREVIEW
STANDARD
STARLITE
1017, 1106
1059
1006, 1079, 1080
1064
1011, 1018, 1022, 1023, 1039,
1041, 1128, 1129, 1130, 1131,
1132
STERN
1055, 1073, 1088
REALISTIC
1011, 1013, 1019, 1026, 1050,
SUNKAI
1095, 1099
1056, 1062, 1064
1055, 1073, 1088, 1089
1017
1006, 1080, 1089, 1106
1010, 1013, 1117
1035, 1046, 1055, 1069, 1070,
SUPERTECH
SUPREME
SUSUMU
SYLVANIA
SYMPHONIC
SYSLINE
1078
1001
1080
1013, 1025
1059
1017
REX
REVOX
ROADSTAR
RUNCO
SABA
1072, 1075, 1091
1084
1006, 1089, 1109
TANDY
TASHIKO
TEC
1032, 1041, 1055, 1079, 1080
1016, 1020, 1079
1079, 1086
SACCS
SAISHO
SALORA
SAMBERS
SAMPO
SAMSUX
SANDRA
SANSEI
SANSUI
SANYO
1055
1036, 1043, 1075
1013, 1019
1019
1078
1110
1112
1016, 1032, 1048, 1050, 1052,
1074, 1075, 1100
1008, 1017, 1020
1017, 1080, 1086, 1096, 1103
1011
1062
TECHNEMA
TECHNICS
TECHNOL ACE
TECHWOOD
TEKNIKA
1098
1023, 1087, 1121
1063
1023, 1026
1009, 1011, 1019, 1025, 1026,
1027, 1040, 1049, 1063, 1064
1072
1098
1006
1016, 1073, 1079
1080, 1095, 1098
1078, 1080
1046, 1069, 1070, 1072, 1091
1015, 1017, 1032, 1034, 1038,
1065, 1067, 1114
1026, 1061, 1062
1090
TELEAVIA
TELEMEISTER
TELETECH
TELETON
TENSAI
TEXET
THOMSON
THORN
SBR
SCHNEIDER
SCIMITSU
SCOTCH
SCOTT
1011, 1062, 1063, 1064, 1083
1022, 1025, 1026, 1050, 1051,
SEARS
1059, 1062, 1063
1016, 1036, 1079, 1089
1043, 1075, 1095
1007
1055, 1073, 1088
1064
TMK
SEG
SEI
SEI-SINUDYNE
SELECO
SEMIVOX
SEMP
TOMASHI
TOTEVISION
TRIUMPH
TUTUNG
UHER
1019
1085
1017, 1032, 1079
1073, 1096, 1098
1067
1051
ULTRA
SENTRA
SHOGUN
SHORAI
SSS
SIAREM
SINDYNE
SIGNATURE
SILVER
1015
1011
1095
1011, 1064
1043, 1075
1043, 1075, 1095
1009
1016
1017
1017
1014, 1055
1074
1006, 1017
1055, 1074, 1077
1017
ULTRAVOX
UNIVERSUM
VECTOR RESEARCH 1013
VESTEL
VICTOR
VIDEOSAT
VIDEOTECHNIC
VIDIKRON
VIDTECH
VISION
1043
1017, 1044, 1089, 1102
1017
1016, 1024, 1053, 1087
1086
1079
1025
1011, 1016, 1062
1098
1055
1079
1017, 1098
1043
1009, 1011, 1012, 1013, 1025,
1026, 1056, 1062, 1063
1016
SKY
SKY-WORTH
SOLAVOX
SONITRON
SONOKO
SONOLOR
SONTEC
SOUNDESIGN
VOXSON
WALTHAM
WATSON
WATT RADIO
WARDS
1062, 1063, 1064
59
En
WEGA
XRB3013A.49.67
59
01.12.12, 4:49 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
09
Co n t ro llin g t h e re st o f yo u r syst e m
WHITE WESTINGHOUSE 1017, 1078, 1098, 1112,
1118, 1119
CD P LAYER
CD
CD-R
YAMAHA
YOKO
ZANUSSI
ZENITH
1011, 1013
1017, 1079, 1101, 1109
1073
1009, 1010, 1040, 1112
1018, 1046, 1055, 1057, 1060,
1091, 1107, 1123, 1124
Manufacturer
AIWA
AKAI
ANAM
ARCAM
AUDIOLAB
AUDIOMECA
AUDIO TON
BESTAR
BURMESTER
CALIFORNIA AUDIO LABS 5004
Code
5016, 5021
5014, 5020, 5032
5041
5021
5021
5021
5021
5022
5045
PIONEER
CD-R
CD
MD P LAYER
Manufacturer
SONY
KENWOOD
SHARP
ONKYO
ORION
Code
5401
5402,5407
5403
5404
5406
CARVER
5021, 5025, 5046
5018, 5022
5004
CONDOR
CURTIS MATHES
CYRUS
DENON
DKK
5021
DENON
PIONEER
5405
5408
5002, 5006, 5040, 5060
5001
DUAL
5031
5025
5038
5053, 5054
5051
5024, 5025
5044, 5045
5005, 5038
5043, 5051
5021
DVD
LD P LAYER
DYNAMIC BASS
EMERSON
EROICA
FANTASIA
FISHER
GARRARD
GENEXXA
GOLDSTAR
GRUNDIG
HARMAN/KARDON 5021, 5023
HITACHI
INKEL
JVC
KENWOOD
Manufacturer
AKAI
BBK
Code
5222
5224
5207
5202
5201
5217
5201
5213
5219
5215
5203, 5205
5202
5202
5210
5203, 5207, 5209
5207
5212
5203
5201
5221
5211
5220
5204, 5206, 5216
5218
5215
5202
5223
CYRUS
DENON
DISCO VISION
FUNAI
HITACHI
HONG DENG
IDALL
5005
5015, 5026, 5046
5011
5003, 5008, 5029, 5056, 5057,
5062
5021
5021
5036
5038
5021, 5038
5004, 5009, 5017, 5021, 5026
5021
5004
5022
5021
5021
5021
KEBAO
MARANTZ
MITSUBISHI
NAD
PANASONIC
PHILIPS
RADIOLA
ROWA
SALORA
SEGA
SHARP
KRELL
LINN
LUXMAN
LXI
MAGNAVOX
MARANTZ
MATSUI
MCS
MEMOREX
MERIDIAN
MICROMEGA
MISSION
MITSUBISHI
MTC
SHINCO
SMC
SONY
SUPER
5014, 5020
5045
5001
5021
5024, 5041, 5051
5021
TELEFUNKEN
TOSHIBA
PIONEER
NAD
NAIM
NIKKO
NSM
5201,5202, 5208
5214
60
En
XRB3013A.49.67
60
01.12.12, 4:49 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Co n t ro llin g t h e re st o f yo u r syst e m
09
ONKYO
OPTIMUS
5012, 5013, 5042, 5059
5001, 5005, 5008, 5019, 5025,
5038, 5045, 5046, 5048
5061
5004, 5037
5045
5021, 5055
5022
DYNAMIC BASS
EROICA
FISHER
GARRARD
GOLDSTAR
GRUNDIG
6028
6041
6028
6036
6036
6002
ORION
PANASONIC
PARASOUND
PHILIPS
PMG
HARMON/KARDON 6002, 6014
INKEL
6003
POPPY
5022
JVC
6027, 6030, 6031
PROTON
QED
QUAD
5021
5021
5021
KENWOOD
KYOCERA
LOTTE
6003, 6004, 6019, 6024, 6025
6013
6034
QUASAR
RCA
REALISTIC
REVOX
ROTEL
SAE
SANSUI
SANYO
SCHNEIDER
SCOTT
SEARS
SHARP
SHERWOOD
SONY
SOUDESIGN
TASCAM
TEAC
TECHNICS
THORENS
TOSHIBA
UNIVERSUM
YAMAHA
YORX
5004,
LUXMAN
MAGNAVOX
MARANTZ
MEMOREX
MITSUBISHI
NAKAMICHI
NIKKO
OLYMPUS
ONKYO
OPTIMUS
PANASONIC
PHILIPS
RCA
RENAISSANCE
REVOX
SAMSUNG
SANSUI
SANYO
SHARP
SONIC
SONY
TEAC
TECHNICS
THORENS
VICTOR
WARDS
YAMAHA
PIONEER
6029
6002
6002
6008, 6009
6016
6020
6035
6029
6010, 6011, 6032
6001, 6021
6023
6002
6028
6040
6002
6038
6002
5010, 5025, 5038
5025, 5026, 5045
5021
5021, 5045
5021
5021, 5033, 5038
5025, 5039
5018
5038
5038
5008, 5026, 5058
5015, 5026, 5031
5001, 5027, 5050
5019
5045
5024, 5026, 5044, 5045
5004, 5034, 5037
5021
5049
5021
5007, 5028
5047
5011
5010, 5021
5005, 5030, 5035, 5038, 5048,
5052, 5063
6028
6019
6036
6012, 6026, 6033
6038
6023
6002
VICTOR
WARDS
PIONEER
6027, 6030
6001
6006, 6007, 6019
6001, 6008, 6009
6021,
CD-R
CD
DVD
TAP E DECK
DVD P LAYER
Manufacturer
ADC
AIWA
AKAI
ANAM
ARCAM
CARVER
DENON
DUAL
Code
6013
Manufacturer
TOSHIBA
SONY
PANASONIC
KENWOOD
JVC
SAMSUNG
AKAI
HARMAN/KARDON 5314
Code
5302
5306
5301, 5322
5307
5311, 5318
5313
5316
6002, 6022, 6017, 6018
6015, 6016
6035
6005
6002, 6028
6005, 6039
6037
61
En
XRB3013A.49.67
61
01.12.12, 4:49 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
09
Co n t ro llin g t h e re st o f yo u r syst e m
MAGNAVOX
MITSUBISHI
ONKYO
PROSCAN
RCA
5302
5303
5302, 5317, 5319
5304
5304
EROICA
7005
7037
7042
7059
FANTASIA
FERGUSON
FINE ARTS
FISHER
7028
SHARP
5320
5312
5301
5310
5301, 5309
5302, 5308
5302, 5315
5305, 5312, 5321
5322
GARRARD
GOLDSTAR
GOODMANS
GP AUDIO
GRUNDIG
HARMAN/KARDON 7009, 7051
INKEL
JBL
7032, 7034, 7035
7010
7027
7033
7018, 7059
THETA DIGITAL
TECHNICS
THOMSON
YAMAHA
PHILIPS
ZENITH
PIONEER
7038, 7040
7009
7007, 7036, 7042
JVC
KENWOOD
7003, 7017, 7025, 7026, 7044,
7053, 7063, 7066
TUN
AMP LIFIER
LOTTE
7037, 7039
Manufacturer
AUDIOLAB
DENON
GRUNDIG
MARANTZ
MICROMEGA
PHILIPS
PIONEER
REVOX
TANDBERG
THORENS
YAMAHA
Code
8005
8002
8005
8005
8005
8005
8004
8005
LUXMAN
MAGNAVOX
MARANTZ
MCINTOSH
MCS
MCSILVER
MICROMEGE
NIKKO
OPTIMUS
ONKYO
PALLADIUM
PANASONIC
PHILIPS
7021
7030, 7042, 7055, 7059
7004, 7018, 7055, 7059
7020
7004
7037
7018, 7059
7032, 7037, 7046
7017, 7034, 7042, 7049, 7052
7013, 7029
7050
7004, 7024, 7041
7018, 7030, 7045, 7048, 7051,
8003
8005
8001, 8006
7055, 7059
7038
7004
7006, 7042
7043
7018
7027
7042
MISC AUDIO
TUN
PHONOTREND
QUASAR
RCA
RENAISSANCE
REVOX
Manufacturer
JERROLD
STARCOM
Code
8201, 8203
8201
SCIENTIFIC ATLANTA 8202
ROADSTAR
SABA
SAISHO
SAMSUNG
SANSUI
SANYO
SCHNEIDER
SHARP
SHERWOOD
SOUNDESIGN
SONY
TAE KWANG
TEAC
7027
7010
7027, 7055
7028
7042
7017
7038
7049
7015, 7054, 7057, 7060
7034
7010, 7035
7004, 7062, 7065
7019, 7024, 7041, 7061, 7062,
7065
TUN
RECEIVERS
Manufacturer
ADC
AIWA
AKAI
ANAM
ARCAM
AUDIOLAB
CAPETRONIC
CARVER
CURTIS
DAEWOO
DENON
DUAL
Code
7042
7012, 7023, 7031, 7055, 7064
7011, 7027
7010, 7046
7018, 7048
7059
7042
7055, 7059
7008
7032
7001, 7056, 7058
7040
TECHNICS
TELEFUNKEN
THORENS
7018, 7059
62
En
XRB3013A.49.67
62
01.12.12, 4:49 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Co n t ro llin g t h e re st o f yo u r syst e m
09
UHER
7027, 7042, 7050
7007
7002, 7006, 7008
7016, 7017
7002, 7008, 7014, 7022, 7042,
7047, 7050, 7052
BAIRD
2001, 2021, 2037, 2039
2011, 2034, 2059
2057
2037
2047, 2064, 2065
VICTOR
WARDS
YAMAHA
PIONEER
BASIC LINE
BEAUMARK
BELL & HOWELL
BRANDT
BRANDT ELECTRONIC 2021
BROKSONIC
BUSH
CALIX
2002, 2040, 2046, 2052, 2078
2034, 2052, 2059, 2072
2017
VCR
VCR
CANON
2015
2011
2035
2011
2034, 2059
2001
2034
2059
2017, 2059
2011
2034
2072
Manufacturer
PHILIPS
PANASONIC
Code
CAPEHART
CARVER
CATRON
CCE
2015, 2035, 2074, 2075
2015, 2042, 2053, 2054,
2055, 2087
2021, 2064, 2074
2001, 2009, 2012, 2013, 2014,
2015
2008, 2021, 2033, 2049, 2050,
2074, 2080
2003, 2005, 2007, 2010, 2034,
2035, 2048, 2050, 2054, 2069,
2071, 2075
2021, 2029, 2038, 2060, 2063
2001, 2004, 2021, 2022, 2043,
2056, 2057
2021, 2023, 2024, 2035, 2074
2023, 2027, 2033, 2035, 2045
2027, 2073
2002, 2004, 2016, 2036, 2046,
2052, 2070, 2072, 2078
2025, 2026, 2037, 2057
2021, 2039, 2064, 2065
2003, 2005, 2010, 2014, 2041,
2042, 2048, 2054, 2055, 2075
2025, 2037, 2038, 2057
2027, 2052
THOMSON
SONY
CGE
CIMLINE
CINERAL
CITIZEN
CLATRONIC
COLT
COMBITECH
CONDOR
CRAIG
CROWN
CURTIS MATHES
CYBERNEX
CYRUS
DAEWOO
DANSAI
DAYTRON
DECCA
DE GRAAF
DENON
JVC
GRUNDIG
2011
AKAI
HITACHI
2017, 2026, 2034, 2057, 2058
2011, 2034, 2059
2015, 2021, 2032, 2042
2057
TOSHIBA
MITSUBISHI
SHARP
2035
2011, 2024, 2025, 2059, 2083
2034
2011
2001, 2035
2022, 2043
2022
2021
2001, 2035, 2037
2001
ORION
SANYO
FERGUSON
BLAUPUNKT
DUAL
NOKIA
ADMIRAL
ADVENTURA
AIKO
AIWA
AKIBA
DUMONT
DYNATECH
ELBE
ELCATECH
ELECTROHOME
ELECTROPHONIC 2017
EMEREX
EMERSON
2001
2059
2018
2034
2017
2001, 2017, 2062, 2070, 2072
2034
2011, 2034, 2052, 2059, 2063,
2072
ALBA
2012
2001, 2002, 2017, 2023, 2040,
2046, 2051, 2052, 2059, 2078,
2083
2057, 2059
2001
2035, 2037
2001, 2022, 2035, 2037
2017, 2023, 2024, 2034, 2052
2025, 2026, 2030, 2037
2011
AMBASSADOR
AMERICA ACTION 2059
AMERICAN HIGH
AMSTRAD
ANAM
2011
2015
ESC
2001, 2059, 2067, 2068
2017, 2042, 2054, 2057, 2059,
2082, 2084
FIDELITY
FINLANDIA
FINLUX
FIRSTLINE
FISHER
FRONTECH
FUJI
ANAM NATIONAL 2042, 2054, 2087
ANITECH
ASA
ASHA
ASUKA
AUDIOVOX
2034
2017, 2035
2057
2017
2017
2015
63
En
XRB3013A.49.67
63
01.12.12, 4:49 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
09
Co n t ro llin g t h e re st o f yo u r syst e m
FUNAI
GARRARD
GE
2001
2001
MATSUI
2004, 2016, 2036, 2052, 2070,
2072
2015, 2042, 2055
2015
2015, 2027, 2032, 2057
2035
MATSUSHITA
MEI
GEC
GENERAL
GOLDHAND
GOLDSTAR
GOODMANS
GO VIDEO
GRAETZ
GRANADA
GRADIENTE
GRANDIN
HANSEATIC
2011, 2028
2034
MELECTRONIC
MEMOREX
2018
2001, 2015, 2017, 2019, 2025,
2026, 2027, 2037, 2052, 2057,
2062, 2085, 2087, 2088
2034
2003, 2005, 2017, 2042, 2048,
2055, 2069
2017, 2018, 2053, 2079
2001, 2017, 2034, 2059, 2075
2077, 2081
2005, 2021, 2037, 2057
2025, 2035, 2037
2001, 2008
MEMPHIS
METZ
MGA
2023, 2057
2001, 2017, 2034
2017
MGN TECHNOLOGY 2057
MINCRVA
MINERVA
MINOLTA
MOTOROLA
MTC
2048
2005, 2010, 2048
2022
2015, 2027
HARMAN/KARDON 2018, 2035
HARLEY DAVIDSON 2001
HARWOOD
HCM
2034
2034
2001, 2057
HEADQUARTER
HINARI
HI-Q
2025
MULTITECH
MURPHY
NAD
2001, 2034
2001
2031
2004, 2034, 2057, 2072
2026
HUGHES NETWORK SYSTEMS 2022
NATIONAL
NEC
NECKERMANN
NESCO
NIKKO
NIKON
2054
HYPSON
IMPERIAL
INGERSOL
INTERFUNK
ITT
2034
2001
2004
2035
2018, 2020, 2021, 2033, 2037
2035
2034
2017
2005, 2021, 2025, 2037, 2038,
2014
2057, 2074
2017, 2059
NOBLEX
NOKIA
2057
ITV
2021, 2025, 2037, 2038, 2057
JENSEN
KAISUI
KEC
2021
2034
2017, 2059
NORDMENDE
OCEANIC
OKANO
2021, 2061, 2064, 2065, 2074
2001, 2021
2063, 2070
KENDO
KENWOOD
KLH
2038, 2052
2018, 2021, 2033
2034
OLYMPUS
OPTIMUS
2015, 2054
2017, 2027, 2031, 2037, 2042,
2077, 2086, 2087, 2088
KODAK
KORPEL
LAYCO
LENCO
LG
LLOYD’S
LOEWE
LOGIK
LUXOR
LXI
2015, 2017
2034
2034
2059
2079
2001, 2051
2004, 2005, 2017, 2035
2004, 2034, 2057
2023, 2025, 2027, 2037, 2038
2017
OSAKI
2001, 2017, 2034
2035
2005, 2017, 2021, 2034
2021
2016
2022
2015, 2017, 2018, 2020, 2022,
2057
2001
OTTO VERSAND
PALLADIUM
PATHE MARCONI
PATHE CINEMA
PENTAX
PENNY
PERDIO
PHILCO
2015, 2018, 2052, 2078
M ELECTRONIC
MAGNASONIC
MAGNAVOX
MAGNIN
MANESTH
MARANTZ
MARTA
2001
2059
PHONOLA
PILOT
PORTLAND
PROFEX
PROFITRONIC
PROLINE
PROSCAN
2035
2017
2011
2066
2057
2001
2032
2001, 2015, 2019, 2035
2057
2024, 2034
2003, 2005, 2015, 2035
2017
64
En
XRB3013A.49.67
64
01.12.12, 4:49 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Co n t ro llin g t h e re st o f yo u r syst e m
09
PROTEC
PULSAR
PYE
QUARTER
QUARTZ
QUASAR
QUELLE
RADIO SHACK
RADIOLA
RADIX
2034
2019
2035
2025
2025
2015, 2042, 2087
2035
2001, 2085
SUNSTAR
SUNTRONIC
SYLVANIA
SYMHONIC
TASHIKO
TATUNG
2001
2001
2001, 2015, 2023, 2035
2001
2001
2001, 2021, 2035
2001, 2021
2011
2015, 2042, 2054
2001, 2015, 2007, 2017, 2028
TEAC
TEC
2035
2017
2017
TECHNICS
TEKNIKA
TELEAVIA
TELEFUNKEN
TENOSAL
TENSAI
RANDEX
RCA
2021
2015, 2022, 2027, 2032, 2038,
2057
2001, 2015, 2017, 2025, 2026,
2027, 2037
2021, 2074
2021, 2047, 2058, 2064, 2074
2034
2001, 2066
2001
REALISTIC
THOMAS
THORN
REX
2016, 2021, 2037
RFT
2075
TMK
2051, 2057
RICOH
ROADSTAR
RUNCO
SABA
2014
TOTEVISION
TOWADA
UHER
UNITECH
UNIVERSUM
2017, 2057
2066
2057
2057
2001, 2006, 2010, 2017, 2035,
2038, 2048, 2057, 2067
2024
2017, 2034, 2057, 2059
2019
2021, 2049, 2050, 2061, 2064,
2065, 2074
2004, 2016, 2036, 2052
2023, 2025, 2038
2019, 2027
2001, 2021, 2033, 2052, 2058,
2078
SAISHO
SALORA
SANKY
SANSUI
VECTOR
VECTOR RESEARCH 2018, 2020
VICTOR
2008, 2021, 2033
VIDEO CONCEPTS 2020, 2024
SAMSUNG
SAVILLE
SBR
2024, 2057, 2076, 2077
2072
2035
VIDEOSONIC
WARDS
2057
2001, 2015, 2022, 2026, 2027,
2032, 2034, 2035, 2057
SCHAUB LORENZ 2001, 2005, 2021, 2037
WHITE WESTINGHOUSE 2052, 2059
SCHNEIDER
SCOTT
SEARS
2001, 2034, 2035
2023, 2024, 2040, 2046
2001, 2015, 2017, 2022, 2025,
2026, 2037
2057, 2066
2004, 2035
2021
2024
2011
2034, 2037
2057
2004
2003, 2005, 2010
2037, 2048
2017
2024, 2034
2004, 2035
2011
2025
2017
2022
2070
XR-1000
XR-1001
XR-1002
YAMAHA
YAMISHI
YOKAN
YOKO
2001
2015
2034
2018
2034
2034
SEG
SEI
SELECO
SEMP
2011, 2057
2001, 2014, 2019, 2052, 2078
2031, 2033, 2035, 2044, 2056
ZENITH
PIONEER
SENTRA
SHINTOM
SHOGUN
SHORAI
SIEMENS
2017, 2030, 2035
SILVA
SINGER
SINUDYNE
SOLAVOX
SONOLOR
SONTEC
STS
TVC
TV
S ATELLITE TUNER
Manufacturer
ABSAT
AST
ALBA
ALDES
Code
4006
4027
4029, 4034, 4037, 4052
4019
4003, 4016, 4025, 4038, 4039,
4042
4013, 4019, 4030, 4044
4009, 4034
AMSTRAD
ANKARO
ANTTRON
SUNKAI
65
En
XRB3013A.49.67
65
01.12.12, 4:49 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
09
Co n t ro llin g t h e re st o f yo u r syst e m
ARMSTRONG
ASTRA
ASTRO
AVALON
AXIS
BT
4015
4005
4008, 4039, 4045
4031
4030, 4046
4053
KREISELMEYER
KYOSTAR
LA SAT
LENCO
LENNOX
LUPUS
4008
4034
4043, 4045
4034
4050
4030
BEKO
4010
LUXOR
4005, 4049
BEST
BLAUPUNKT
BOCA
4030
4008
4015, 4043
4022
MANHATTAN
MARANTZ
MASPRO
MATSUI
4037, 4045, 4050
4011
4004, 4023
4024, 4048
BRAIN WAVE
BRITISH SKY BROADCASTING 4058
MEDIASAT
MEDIAMARKT
MINERVA
MORGAN’S
NAVEX
4059
4015
4048
4015, 4043
4022
4039
4057
BUSH
CNT
CAMBRIDGE
4002
4045
4024
CANAL SATELLITE 4059
CANAL+ 4059
CHANNEL MASTER 4029
NEUHAUS
NEUSAT
COMLINK
CONNEXIONS
CROWN
CYRUS
4019
4031
4015
4011
NEWHAUS
NIKKO
NOKIA
4013
4028
4005, 4032, 4037, 4049, 4054,
4063
D-BOX
DDC
DNT
4054
4029
4011, 4031
4031, 4036, 4061
4034
NORDMENDE
ORBITECH
OXFORD
4029
4039
4024
ECHOSTAR
EMANON
FTE HUMAX
FERGUSON
FIDELITY
FINLUX
FRACARRO
FREECOM
FUBE
G-SAT
GALAXIS
GENERAL INSTRUMENT 4012
GOLD BOX
GOODING
GOODMANS
GRUNDIG
HINARI
PACE
4002, 4009, 4014, 4023, 4037,
4055, 4058
4048
4039
4037
4007, 4011, 4020, 4037, 4048,
4059
4019, 4050
4021, 4059
4061
4037
4019
4029, 4044
4011
4031, 4064
4011, 4013, 4019
4027, 4038
4023, 4045
4037
4060
PALLADIUM
PALSAT
PANDA
4002, 4009, 4010, 4023
4016
4005, 4024, 4032, 4037
4061
4034
4030, 4031, 4034
4009
PHILIPS
PHONOTREND
PIONEER
PLANET
PROMAX
PROSAT
QUADRAL
RADIOLA
RADIX
RFT
SAT
SABA
SABRE
4019, 4057, 4060
4059
4048
4010
4008, 4010, 4048
4009
HIRSCHMANN
HITACHI
4008, 4032, 4039, 4040, 4049
4037
HOUSTON
HUTH
ITT
4053
SAGEM
4056
4005
4026, 4051
4009
4013, 4015, 4019, 4026
4005
4061
SALORA
SATCOM
SATEC
INVIDEO
INTERVISION
JVC
JOHANSSON
KATHREIN
4050
4048
4022
SATMASTER
SATPARTNER
SCHWAIGER
SEEMANN
4026
4022, 4034, 4040, 4045
4009, 4041
4031, 4046
4004, 4006, 4008, 4011, 4035,
4041
66
En
XRB3013A.49.67
66
01.12.12, 4:49 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Co n t ro llin g t h e re st o f yo u r syst e m
09
SEG
4030, 4034
4008
4019, 4044, 4051
4017, 4018
4062
JASCO
JERROLD
3007
SIEMENS
SKYMASTER
SONY
STRONG
SUNSTAR
TPS
3002, 3004, 3005, 3006, 3007,
3020, 3031, 3046
3044
3001
3009, 3028
3041
LG ALPS
MEMOREX
MNET
4043
4056
NOW
TANTEC
4023, 4037
4001, 4039
4026
4034
4015, 4052
4051
4037, 4059
4026, 4053
4027
4040
4022
OAK
PACIFIC
3009
3039
3001, 3013
3001
3001
TECHNISAT
TECHNILAND
TELEFUNKEN
TELEKA
TELESAT
THOMSON
TONNA
TRIAD
TRIASAT
UNITOR
PANASONIC
PARAGON
PULSAR
PVP STEREO VISUAL
MATRIX
PIONEER
QUASAR
RADIO SHACK
REMBRANDT
RUNCO
3002
3010, 3014, 3018, 3036
3001
3007
3004
3001
3014, 3040
3024
UNIVERSUM
VENTANA
VORTEC
VTECH
4008, 4049
4011
4034
SAMSUNG
SATBOX
SIGNAL
4027
3007
WINERSAT
WISI
XSAT
4022
SIGNATURE
STS
SALORA
3004
3015
3026
4008, 4027, 4031, 4037
4006, 4065
XCOM MULTIMEDIA 4065
SCIENTIFIC
3003, 3032, 3049
ZEHNDER
4033, 4045, 4047
SCIENTIFIC ATLANTA 3003, 3008, 3021
SEAWOO
3045
3002, 3007
3007
3007
3043
TVC
TV
CABLE TV
STARCOM
STARGATE
STARQUEST
TAIHAN
Manufacturer
ABC
Code
3002, 3003, 3004, 3006, 3008
ANDOVER
BELL & HOWELL
3037
3006
TELESERVICE
TELE+ 1
3022
3028
BIRGMINGHAM CABLE
TUDI
3023
COMMUNICATION 3020
BRITISH TELECOM 3002, 3012
TUSA
TOCOM
3007
3005
CABLETIME
CONTEC
CLYDE
CRYPTOVISION
DAEHAN
DAERYUNG
DECSAT
3016, 3019, 3025, 3029
TONGKOOK
TOSHIBA
3042, 3048
3001
3002
3017
3033
3012
3037
3001, 3034
3009
3011
3038
3043
3003
3027
3007
3028
UNITED CABLE
VIDEOWAY
VISICABLE+
WESTMINSTER
WOLSEY GENE
ZENITH
EVERQUESST
FILMNET
FRANCE TELECOM 3030
GEC
GEMINI
3011
3007
GENERAL INSTRUMENT 3004, 3020, 3031, 3046
GOLDSTAR
GRUNDIG
HITACHI
3014, 3047
3035
3004
67
En
XRB3013A.49.67
67
01.12.12, 4:49 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
10
Ad d it io n a l in fo rm a t io n
Tro u b le sh o o t in g
Incorrect operations are often mistaken for trouble and malfunctions. If you think that there is
something wrong with this component, check the points below. Sometimes the trouble may lie in
another component. Investigate the other components and electrical appliances being used. If the
trouble cannot be rectified even after exercising the checks listed below, ask your nearest Pioneer
authorized service center or your dealer to carry out repair work.
Problem
Remedy
The power does not turn on.
• Connect the power plug to the wall outlet.
• Disconnect the power plug from the outlet, and insert again.
• Make sure there are no loose strands of speaker wire touching
the rear panel. This could cause the receiver to shut off
automatically.
No sound is output when a
function is selected.
• Make sure the component is connected correctly (refer to
pages 14–19).
• Press MUTE on the remote control to turn muting off.
• Adjust the MASTER VOLUME.
• Press the MONITOR button to turn monitoring off.
No image is output when a
function is selected.
• Make sure the component is connected correctly (refer to
pages pages 14–19).
• Select the correct component (use the MULTI JOG/INPUT
SELECTOR dial or the MULTI CONTROL buttons on the remote).
Considerable noise in radio
broadcasts.
• Tune in the correct frequency.
• Connect the antenna (refer to page 19).
• Route 2 RF and digital cables away from the antenna
terminals and wires.
• Fully extend the FM wire antenna, position for best reception,
and secure to a wall.
• Connect an outdoor FM antenna (refer to page 19).
• Adjust the direction and position for best reception.
• Connect an additional internal or external AM antenna (refer
to page 19).
• Turn off the equipment causing the noise or move it away from
the receiver.
• Place the antenna farther away from the equipment causing
the noise.
Broadcast stations cannot be
selected automatically.
• Connect an outdoor antenna (refer to page 19).
68
En
XRB3013A.68.74
68
01.12.12, 5:13 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Ad d it io n a l in fo rm a t io n
10
Problem
Remedy
No sound from surround or
center speakers.
• Refer to Speaker setting on page 39 to check the speaker
settings.
• Refer to Setting the relative volume level of each channel on
page 44 to check the speaker levels.
• Connect the speakers properly (refer to page 19–21).
No sound from surround back
speakers.
• Refer to Surround back speaker setting on page 40 to check
the surround back speaker settings.
• Refer to the table on page 33 to make sure the 6.1 channel
setting and the sound mode are set for surround back sound.
Noise during playback of a
cassette deck.
• Move the cassette deck further from your receiver, until the
noise disappears.
Sound is produced from other
• Set the SIGNAL SELECT to AUTO, DIGITAL or ANALOG
components, but not from LD or according to the type of connections made. (refer to page 34).
DVD player.
• Set the digital input settings correctly (refer to page 43).
• Make digital connections (refer to page 14) and set the
SIGNAL SELECT to DIGITAL (refer to page 34).
• Refer to the instruction manual supplied with the DVD player.
No sound is output or a noise is • Set the digital volume level of the player to full, or to the
output when software with DTS neutral position.
is played back.
When a search is performed by • This is not a malfunction, but be sure to turn the volume
a DTS compatible CD player
down to prevent the output of loud noise from your speakers.
during playback, noise is output.
Can’t operate the remote
control.
• Replace the batteries (refer to page 6).
• Operate within 23 feet ( 7 m), 30° of the remote sensor on the
front panel (refer to page 6).
• Remove the obstacle or operate from another position.
• Avoid exposing the remote sensor on the front panel to direct
light.
The display is dark or off.
• Press FL DIMMER on the remote control repeatedly to return
to the default.
If the unit does not operate normally due to external effects such as static electricity disconnect the
power plug from the outlet and insert again to return to normal operating conditions.
69
En
XRB3013A.68.74
69
01.12.12, 5:13 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
10
Ad d it io n a l in fo rm a t io n
Vid e o Se ct io n
Sp e cifica t io n s
In p u t (Se n sit ivit y/Im p e d a n ce )
VCR/DVR, DVD/LD, TV/SAT ............. 1 Vp-p/75 Ω
Am p lifie r Se ct io n
Continuous average power output of 100 watts*
per channel, min., at 8 ohms, from 20 Hz to
20,000 Hz with no more than 0.2 %** total
harmonic distortion (front).
Ou t p u t (Le ve l/Im p e d a n ce )
VCR/DVR ........................................... 1 Vp-p/75 Ω
Fre q u e n cy Re sp o n se
VCR/DVR, DVD/LD,
TV/SAT ] MONITOR........... 5 Hz to 7 MHz dB
Signal-to-Noise Ratio ................................. 55 dB
Cross Talk .................................................... 55 dB
+ 0
– 3
Co n t in u o u s Po w e r Ou t p u t
Front ...................................... 100 W per channel
(1kHz, 1.0 %, 8 Ω)
Center .......................... 100 W (1kHz, 1.0 %, 8 Ω)
Surround ............................... 100 W per channel
(1kHz, 1.0 %, 8 Ω)
FM Tu n e r Se ct io n
Frequency Range ............. 87.5 MHz to 108 MHz
Usable Sensitivity ................ Mono:13.2 dBf, IHF
(1.3 µV/ 75 Ω)
Surround Back* ................... 100 W per channel
(1kHz, 1.0 %, 8 Ω)
* VSX-D811S only
50 dB Quieting Sensitivity .......... Mono: 20.2 dB
Stereo: 38.6 dBf
Signal-to-Noise Ratio ..................... Mono: 73 dB
(at 85 dBf)
In p u t (Se n sit ivit y/Im p e d a n ce )
CD, VCR/DVR, CD-R/TAPE/MD,
DVD/LD, TV/SAT ........................... 200 mV/47 kΩ
Stereo: 70 dB (at 85 dBf)
Fre q u e n cy Re sp o n se
CD, VCR/DVR, CD-R/TAPE/MD, DVD/LD,
TV/SAT ........................... 5 Hz to 100,000 Hz dB
Distortion ........................... Stereo: 0.5 % (1 kHz)
Alternate Channel Selectivity .................... 60 dB
(400 kHz)
+ 0
– 3
Stereo Separation ......................... 40 dB (1 kHz)
Frequency Response .................. 30 Hz to 15 kHz
(± 1 dB)
Ou t p u t (Le ve l/Im p e d a n ce )
VCR/DVR REC, CD-R/TAPE/
MD REC ....................................... 200 mV/2.2 kΩ
Antenna Input (DIN) .............. 75 Ω unbalanced
To n e Co n t ro l
BASS .......................................... ± 6 dB (100 Hz)
TREBLE ...................................... ± 6 dB (10 kHz)
LOUDNESS .................................. + 9 dB/+ 9 dB
(100 Hz/10 kHz)
AM Tu n e r Se ct io n
Frequency Range .............. 530 kHz to 1,700 kHz
Sensitivity (IHF, Loop antenna) ............ 350 µV/m
Selectivity .................................................... 25 dB
Signal-to-Noise Ratio ................................. 50 dB
Antenna ........................................ Loop antenna
Sig n a l-t o -No ise Ra t io (IHF, sh o rt
circu it e d , A n e t w o rk)
CD, VCR/DVR, CD-R/TAPE/MD,
DVD/LD, TV/SAT ......................................... 96 dB
Sig n a l-t o No ise Ra t io [EIA, a t 1 W (1
kHz)]
CD, VCR/DVR, CD-R/TAPE/MD,
DVD/LD, TV/SAT ......................................... 79 dB
70
En
XRB3013A.68.74
70
01.12.12, 5:13 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Ad d it io n a l in fo rm a t io n
10
Misce lla n e o u s
Power Requirements ................. AC 120 V, 60Hz
Power Consumption
VSX-D711 .................................. 260W, 340 VA
VSX-D811S ............................... 300W, 420 VA
In Standby ................................................ 1 W
AC Outlet .................. 100 W MAX. (SWITCHED)
Dimensions ..... 420 (W) x 158 (H) x 401 (D) mm
(16-9/16 (W) x 6-4/16 (H) x 15-6/16 (D) in.)
Weight (without package)
VSX-D711 .................................................... 9.0 kg
(19.8 lb)
VSX-D811S ................................................ 10.5 kg
(23.2 lb)
Fu rn ish e d Pa rt s
AM loop antenna ................................................ 1
FM wire antenna ................................................ 1
Dry cell batteries (AA size IEC R6P) ................. 2
Remote control ................................................... 1
Operating instructions ...................................... 1
Specifications and the design are subject to
possible modifications without notice, due to
improvements.
* Measured pursuant to the Federal Trade
Commission’s Trade Regulation rule on Power
Output Claims for Amplifiers.
** Measured by Audio Spectrum Analyzer.
71
En
XRB3013A.68.74
71
01.12.12, 5:13 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
10
Ad d it io n a l in fo rm a t io n
U
T
T
EIA
ES
T
1
9
2
4
S
I
O
We
Want You
LISTENING
For A Lifetime
Selecting fine audio equipment such as the unit you’ve just purchased is only the start of your musical enjoyment. Now
it’s time to consider how you can maximize the fun and excitement your equipment offers. This manufacturer and the
ElectronicIndustriesAssociation’sConsumerElectronicsGroupwantyoutogetthemostoutofyourequipmentbyplaying
it at a safe level. One that lets the sound come through loud and clear without annoying blaring or distortion-and, most
importantly, without affecting your sensitive hearing.
Sound can be deceiving. Over time your hearing “comfort level” adapts to higher volumes of sound. So what sounds
“normal” can actually be loud and harmful to your hearing. Guard against this by setting your equipment at a safe level
BEFORE your hearing adapts.
To establish a safe level:
•
•
Start your volume control at a low setting.
Slowly increase the sound until you can hear it comfortably and clearly, and without distortion.
Once you have established a comfortable sound level:
•
Set the dial and leave it there.
Taking a minute to do this now will help to prevent hearing damage or loss in the future. After all, we want you listening
for a lifetime.
We Want You Listening For A Lifetime
Used wisely, your new sound equipment will provide a lifetime of fun and enjoyment. Since hearing damage from
loudnoiseisoftenundetectableuntilitistoolate,thismanufacturerandtheElectronicIndustriesAssociation’sConsumer
Electronics Group recommend you avoid prolonged exposure to excessive noise. This list of sound levels is included for
your protection.
Decibel
Level
30
40
50
60
Example
Quiet library, soft whispers
Living room, refrigerator, bedroom away from traffic
Light traffic, normal conversation, quiet office
Air conditioner at 20 feet, sewing machine
Vacuum cleaner, hair dryer, noisy restaurant
Average city traffic, garbage disposals, alarm clock
at two feet.
70
80
THE FOLLOWING NOISES CAN BE DANGEROUS UNDER CONSTANT EXPOSURE
90
Subway, motorcycle, truck traffic, lawn mower
Garbage truck, chain saw, pneumatic drill
Rock band concert in front of speakers, thunderclap
Gunshot blast, jet plane
100
120
140
180
Rocket launching pad
Information courtesy of the Deafness Research Foundation.
EIA
ES
T
1
9
2
4
We
Want You
I
LISTENING
For A Lifetime
72
En
XRB3013A.68.74
72
01.12.12, 5:13 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Ad d it io n a l in fo rm a t io n
10
73
En
XRB3013A.68.74
73
01.12.12, 5:13 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
10
Ad d it io n a l in fo rm a t io n
74
En
XRB3013A.68.74
74
01.12.12, 5:13 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Ad d it io n a l in fo rm a t io n
10
75
En
XRB3013A.68.74
75
01.12.12, 5:13 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Should this product require service in the U.S.A. and you wish to locate the nearest Pioneer
Authorized Independent Service Com pany, or if you wish to purchase replacem ent parts,
operating instructions, service m anuals, or accessories, please call the num ber shown below.
8 0 0 – 4 2 1 – 1 4 0 4
Please do not ship your product to Pioneer without first calling the Custom er Service Departm ent
at the above listed num ber for assistance.
PIONEER ELECTRONICS (USA) INC.
CUSTOMER SERVICE DEPARTMENT
P.O. BOX 1760, LONG BEACH,
CA 90801-1760, U.S.A.
For warranty inform ation please see the Lim ited Warranty sheet included with your product.
Should this product require service in Canada, please contact a Pioneer Canadian Authorized
Dealer to locate the nearest Pioneer Authorized Service Com pany in Canada.
Alternatively, please contact the Custom er Service Departm ent at the following address:
Pioneer Electronics of Canada, Inc.
Custom er Service Departm ent
300 Allstate Parkway, Markham , Ontario L3R OP2
(905) 479-4411
1-877-283-5901
For warranty inform ation please see the Lim ited Warranty sheet included with your product.
Si ce produit doit être réparé au Canada, veuillez vous adresser à un distributeur autorisée
Pioneer au Canada pour obtenir le nom de la Société de Service Autorisée Pioneer le plus près de
chez vous. Ou encore, veuillez vous com m uniquer avec le Service de Clientèle de Pioneer:
Pioneer électroniques du Canada, Inc.
Départem ent de service au consom m ateurs
300 Allstate Parkway, Markham , Ontario L3R OP2
(905) 479-4411
1-877-283-5901
Pour obtenir des renseignem ents sur la garantie, veuillez vous reporter au feuillet sur la Garantie
Lim itée gui accom pagne le produit.
Published by Pioneer Corporation.
Copyright © 2001 Pioneer Corporation.
All rights reserved.
PIONEER CORPORATION
PIONEER ELECTRONICS [USA] INC.
4-1, Meguro 1-Chome, Meguro-ku, Tokyo 153-8654, Japan
P.O. BOX 1540, Long Beach, California 90801-1540, U.S.A.
PIONEER ELECTRONICS OF CANADA, INC. 300 Allstate Parkway, Markham, Ontario L3R OP2, Canada
PIONEER EUROPE NV Haven 1087, Keetberglaan 1, B-9120 Melsele, Belgium TEL: 03/570.05.11
PIONEER ELECTRONICS AUSTRALIA PTY. LTD. 178-184 Boundary Road, Braeside, Victoria 3195, Australia, TEL: [03] 9586-6300
PIONEER ELECTRONICS DE MEXICO S.A. DE C.V.
San Lorenzo 1009 3er Piso Desp. 302 Col. Del Valle Mexico D.F. C.P. 03100
TEL: 55-5688-5290
<TNGZF/01L00001>
Printed in
<XRB3013-A>
XRB3013A.68.74
76
01.12.12, 5:13 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
|