DVD Player
DV-454
DV-350
Operating Instructions
Download from Www.Somanuals.com. All Manuals Search And Download.
WARNING: Slot and openings in the cabinet are
provided for ventilation and to ensure reliable opera-
tion of the product and to protect it from overheating,
to prevent fire hazard, the openings should never be
blocked and covered with items, such as newspapers,
table-cloths, curtains, etc. Also do not put the appara-
tus on the thick carpet, bed, sofa, or fabric having a thick
WARNING:
THE APPARATUS IS NOT WATER-
PROOFS, TO PREVENT FIRE OR SHOCK HAZARD, DO
NOT EXPOSE THIS APPARATUS TO RAIN OR MOIS-
TURE AND DO NOT PUT ANY WATER SOURCE NEAR
THIS APPARATUS, SUCH AS VASE, FLOWER POT, COS-
METICS CONTAINER AND MEDICINE BOTTLE ETC.
H001A_En
pile.
H040_En
On the top of the player
When disposing of used batteries, please comply with
governmental regulations or environmental public
instruction’s rules that apply in your country or area.
H048 En
This product is for general household purposes. Any
failure due to use for other than household purposes
(such as long-term use for business purposes in a res-
taurant or use in a car or ship) and which requires repair
will be charged for even during the warranty period.
WARNING:
BEFORE PLUGGING IN THE UNIT
K041_En
FOR THE FIRST TIME, READ THE FOLLOWING SECTION
CAREFULLY. THE VOLTAGE OF THE AVAILABLE POWER
SUPPLY DIFFERS ACCORDING TO COUNTRY OR
REGION. BE SURE THAT THE POWER SUPPLY VOLTAGE
OF THE AREA WHERE THIS UNIT WILL BE USED MEETS
THE REQUIRED VOLTAGE (E.G., 230V OR 120V) WRIT-
This product incorporates copyright protection
technology that is protected by method claims of
certain U.S. patents and other intellectual property
rights owned by Macrovision Corporation and other
rights owners. Use of this copyright protection
technology must be authorized by Macrovision
Corporation, and is intended for home and other
limited viewing uses only unless otherwise
authorized by Macrovision Corporation. Reverse
engineering or disassembly is prohibited.
TEN ON THE REAR PANEL.
H041A_En
WARNING:
NO NAKED FLAME SOURCES,
SUCH AS LIGHTED CANDLE, SHOULD BE PLACED ON
THE APPARATUS. IF NAKED FLAME SOURCES ACCI-
DENTALLY FALL DOWN, FIRE SPREAD OVER THE AP-
PARATUS THEN MAY CAUSE FIRE.
H044_En
OPERATING ENVIRONMENT
This product includes FontAvenue® fonts
licenced by NEC corporation. FontAvenue is a
registered trademark of NEC Corporation.
Operating environment temperature and humidity:
+5°C – +35°C (+41°F – +95°F); less than 85%RH (cooling
vents not blocked)
Do not install in the following locations
÷ LOCATION EXPOSED TO DIRECT SUNLIGHT OR
STRONG ARTIFICIAL LIGHT
÷ LOCATIONEXPOSEDTOHIGHHUMIDITY, ORPOORLY
VENTILATED LOCATION
H045_En
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Thank you for buying this Pioneer product.
Please read through these operating instructions so you will know how to
operate your model properly. After you have finished reading the instructions, put
them away in a safe place for future reference.
Using the on-screen displays ......................... 20
Setting up with the Setup Navigator ..............21
Playing discs ................................................... 23
Basic playback controls ............................ 24
Front panel controls .................................. 25
DVD-Video disc menus ............................. 25
Video CD PBC menus ................................26
01 Before You Start
Features ..............................................................6
What’s in the box ...............................................7
Putting the batteries in the remote control .....7
Using the remote control ..................................7
Disc / Content Format Playback
Compatibility ......................................................8
General Disc Compatibility ..........................8
CD-R/RW Compatibility ...............................8
DVD-R/RW Compatibility .............................8
PC Created Disc Compatibility ....................8
Compressed Audio Compatibility ...............9
Titles, chapters and tracks ...........................9
DVD-Video regions........................................9
05 Playing Discs
Introduction ..................................................... 27
Using the Disc Navigator to browse
the contents of a disc ..................................... 27
Scanning discs ................................................ 28
Playing in slow motion ....................................28
Frame advance/frame reverse ....................... 28
Looping a section of a disc ............................ 29
Using repeat play ............................................ 29
Using random play.......................................... 30
Creating a program list....................................31
Editing a program list.................................33
Other functions available
02 Connecting Up
Rear panel connections ................................. 10
Easy connections ............................................ 11
Connecting using the S-Video output ........... 12
Connecting using the AV connector output ...... 12
Connecting to an AV receiver ........................ 13
from the program menu ............................33
Searching a disc ..............................................34
Switching subtitles ..........................................34
Switching DVD audio language......................34
Switching audio channel when
playing a Video CD .......................................... 35
Zooming the screen .........................................35
Switching camera angles................................35
Displaying disc information ............................36
03 Controls and Displays
Front panel ........................................................15
Display ............................................................. 16
Remote control ................................................ 17
04 Getting Started
Switching on.................................................... 19
Let’s Get Started .........................................19
4
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
06 The Audio Settings Menu
Audio DRC ........................................................37
Virtual Surround ...............................................37
08 Additional Information
Taking care of your player and discs ..............47
Handling discs ........................................... 47
Storing discs ...............................................47
Discs to avoid..............................................47
Cleaning the pickup lens ...........................48
Problems with condensation .................... 48
Hints on installation .................................. 48
Moving the player ...................................... 48
Power cord caution ....................................48
Screen sizes and disc formats ....................... 49
Widescreen TV users ................................. 49
Standard TV users ..................................... 49
Resetting the player .........................................49
Language code list .......................................... 50
Country code list ..............................................50
Selecting languages using the
07 The Initial Settings Menu
Using the Initial Settings menu ......................39
Digital Audio Out settings .............................. 39
Digital Out ...................................................39
Dolby Digital Out ....................................... 39
DTS Out .......................................................40
96kHz PCM Out ..........................................40
MPEG Out ...................................................40
Video Output settings ..................................... 41
TV Screen ................................................... 41
AV Connector Out ...................................... 41
S-Video Out................................................. 41
Language settings .......................................... 42
Audio Language .........................................42
Subtitle Language ..................................... 42
DVD Menu Language .................................43
Subtitle Display .......................................... 43
Display settings ............................................... 43
OSD Language........................................... 43
On Screen Display ..................................... 43
Angle Indicator .......................................... 44
Options............................................................. 44
Parental Lock ..............................................44
Registering a new password ............... 44
Changing your password .................... 45
Setting/changing the
language code list ........................................... 51
Glossary ............................................................51
Setting the TV system ..................................... 53
Watching NTSC on a PAL TV
(MOD. PAL) ................................................ 53
Specifications ...................................................54
Parental Lock level ................................45
Setting/changing the Country Code ...46
5
En
Download from Www.Somanuals.com. All Manuals Search And Download.
01
Before You Start
Features
MP3 compatibility
This player is compatible with CD-R, CD-RW
and CD-ROM discs that contain MP3 audio
tracks (see Compressed Audio Compatibility
on page 9).
24-bit/192kHz compatible DAC
This player is fully compatible with high
sampling-rate discs, capable of delivering
better-than-CD sound quality in terms of
dynamic range, low-level resolution and
high-frequency detail.
Graphical on-screen displays
Setting up and using your DVD player is
made very easy using the graphical on-
screen displays.
Excellent audio performance with
Dolby*1 Digital and DTS*2 software
Energy saving design
This player features an auto power-off
function. If the player is not used for over 30
minutes, it automatically switches itself into
standby.
Logos:
1
When connected to a suitable AV amplifier
or receiver, this player gives great surround
sound with Dolby Digital and DTS discs.
This unit is designed to use 0.3 W of power
when in standby mode.
TruSurround*3 and Virtual Dolby
Digital
*1 Manufactured under license from Dolby
Laboratories. “Dolby” and the double-D
symbol are trademarks of Dolby Laboratories.
Logo:
TruSurround/Virtual Dolby Digital creates a
realistic surround-sound effect from any
Dolby Digital source using just two speakers
(see page 37).
*2 “DTS” is a registered trademark of Digital
Theater Systems, Inc.
*3 TruSurround and the
® symbol are
trademarks of SRS Labs, Inc. TruSurround
technology is incorporated under license from
SRS Labs, Inc.
Picture zoom
While a DVD or Video CD is playing, you can
zoom in on any part of the picture at up to 4x
magnification for a closer look (see page
35).
6
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Before You Start
What’s in the box
01
• Don’t mix new and old batteries
together.
Please confirm that the following accesso-
ries are in the box when you open it.
• Don’t use different kinds of battery
together—although they may look
similar, different batteries may have
different voltages.
• Remote control
• AA/R6P dry cell batteries x2
• Audio/video cable (red/white/yellow
plugs)
• Make sure that the plus and minus ends
of each battery match the indications in
the battery compartment.
• Power cable
• These operating instructions
• Warranty card
• Remove batteries from equipment that
isn’t going to be used for a month or
more.
• When disposing of used batteries,
please comply with governmental
regulations or environmental public
instruction’s rules that apply in your
country or area.
Putting the batteries in the
remote control
1
Open the battery compartment cover
on the back of the remote control.
H048 En
Using the remote control
Keep in mind the following when using the
remote control:
2
Insert two AA/R6P batteries into the
• Make sure that there are no obstacles
between the remote and the remote
sensor on the unit.
battery compartment following the
indications (ª, ·) inside the compart-
ment.
• The remote has a range of about 7
meters.
• Remote operation may become unreli-
able if strong sunlight or fluorescent
light is shining on the unit’s remote
sensor.
3
Close the cover.
• Remote controllers for different devices
can interfere with each other. Avoid
using remotes for other equipment
located close to this unit.
• Replace the batteries when you notice a
fall off in the operating range of the
remote.
Incorrect use of batteries can result in
hazards such as leakage and bursting.
Please observe the following:
7
En
Download from Www.Somanuals.com. All Manuals Search And Download.
01
Before You Start
CD-R/RW Compatibility
Disc / Content Format Play-
back Compatibility
• This unit will play CD-R and CD-RW
discs recorded in CD Audio, Video CD,
or MP3 audio formatting. However, any
other content may cause the disc not to
play, or create noise/distortion in the
output.
General Disc Compatibility
• This player was designed and engi-
neered to be compatible with software
containing one or more of the following
logos.
• This unit cannot record CD-R or CD-RW
discs.
• Un-finalized CD-R/RW discs recorded in
CD Audio can be played, but not all
Table of Contents (playing time, etc..)
will be displayed.
DVD-Video
DVD-R/RW Compatibility
• This unit will play DVD-R/RW discs that
were recorded using the DVD Video
format.
Audio CD
Video CD
CD-R
CD-RW
• Other formats, including but not limited
to the following, are not playable in this
player:
• This unit will not play DVD-RW discs
that were recorded using the Video
Recording format.
DVD-Audio / SACD / Photo CD /
DVD-RAM / DVD-ROM / CD-ROM
• This unit cannot record DVD-R/RW
discs
(except those that contain MP3 files
formatted as specified in the “Com-
pressed Audio Compatibility” section.)
• Un-finalized DVD-R/RW discs cannot be
played in this player.
• DVD-R/RW and CD-R/RW discs (Audio
CDs and Video CDs) recorded using a
DVD Recorder, CD Recorder or Personal
Computer may not be playable on this
machine. This may be caused by a
number of possibilities, including but
not limited to: the type of disc used; the
type of recording; or damage, dirt or
condensation on either the disc or the
player’s pick-up lens.
PC Created Disc Compatibility
• If you record a disc using a Personal
Computer, even if it is recorded in a
“compatible format” as listed above,
there will be cases in which the disc
may not be playable in this machine due
to the setting of the application software
used to create the disc. In these
particular incidences, check with the
software publisher for more detailed
information.
Special note about particular formats or
software follows below:
• DVD-R/RW and CD-R/RW software disc
boxes also have additional compatibility
information.
8
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Before You Start
01
Compressed Audio Compatibility
• This unit will play compressed audio
files formatted in the MPEG-1 Audio
Layer 3 format (MP3) with a 32, 44.1 or
48kHz fixed bit rate. Incompatible files
will not play and “UNPLAYABLE” will be
displayed on the unit.
Titles, chapters and tracks
DVD discs are generally divided into one or
more titles. Titles may be further subdivided
into chapters.
Title 1
Title 2
Title 3
• Variable Bit-Rate (VBR) files are
playable, but playing time may not be
shown correctly.
Chapter 1 Chapter 2 Chapter 3 Chapter 1 Chapter 1 Chapter 2
CDs and Video CDs are divided into tracks.
• The CD-ROM used to compile your MP3
files must be ISO 9660 Level 2 compli-
ant.
• CD physical format: Mode1, Mode2 XA
Form1.
Track 1 Track 2 Track 3 Track 4 Track 5 Track 6
• This player only plays tracks that are
named with the file extension “.mp3” or
“.MP3”
CD-ROMs containing MP3 files are divided
into folders and tracks. Folders may also
contain further subfolders.
• This player is not compatible with multi-
session discs. If you try and play a multi-
session disc, only the first session will
be played.
Folder A
Track 1
Folder B Folder C
Track 2
Track 3
Track 1
Track 1
Track 2
• Use CD-R or CD-RW media for record-
ing your MP3 files. The disc must be
finalized in order to play in this unit.
DVD-Video regions
• This player can recognize a maximum of
250 folders or 250 tracks. Discs contain-
ing more than 250 folders or 250 tracks
will play, but only the first 250 folders /
tracks.
All DVD-Video discs carry a region mark on
the case somewhere that indicates which
region(s) of the world the disc is compatible
with. Your DVD player also has a region
mark, which you can find on the rear panel.
Discs from incompatible regions will not play
in this player. Discs marked ALL will play in
any player.
• Folder and track names (excluding the
“.mp3” extension) are displayed.
• There are many different recording bit-
rates available to encode your MP3 files.
This unit was designed to be compatible
with all of them. Audio encoded at
The diagram below shows the various DVD
regions of the world.
128Kbps should sound close to regular
CD Audio quality. This player will play
lower bit-rate MP3 tracks, but please
note that the sound quality becomes
noticeably worse at lower bit-rates.
1
5
2
1
6
2
3
4
5
2
4
9
En
Download from Www.Somanuals.com. All Manuals Search And Download.
02
Connecting Up
Rear panel connections
1
2
3
4
DIGITAL AUDIO OUT
COAXIAL
AUDIO OUT
L
AV CONNECTOR (RGB)-TV
R
OPTICAL
S
VIDEO OUT
7
6
5
When connecting this player up to your
TV, AV receiver or other components,
make sure that all components are
switched off and unplugged.
4
AC IN
Connect the supplied power cord here, then
plug into a power outlet.
5
VIDEO OUT
1
DIGITAL AUDIO OUT – COAXIAL
This is a standard video output that you can
connect to your TV or AV receiver using the
supplied audio/video cable.
This is a digital audio output for connection
to a PCM, Dolby Digital, DTS and/or MPEG-
compatible AV receiver that has a coaxial
digital input.
6
S (S-Video output)
This is an S-video output that you can use
instead of the video output described in 5
above.
Connect using a commercially available
coaxial digital audio cable.
2
AUDIO OUT L / R
7
DIGITAL AUDIO OUT – OPTICAL
This pair of analog audio outputs connects to
your TV, AV receiver or stereo system. Even if
you are connecting up one of the digital
outputs, we still recommend you connect
these jacks.
(DV-454 only)
This is a digital audio output for connection
to a PCM, Dolby Digital, DTS and/or MPEG-
compatible AV receiver that has an optical
digital input.
Use the supplied audio/video cable when
connecting these jacks. Match the colors of
the jacks and cables for correct stereo
sound.
Connect using a commercially available
optical digital audio cable.
3
AV CONNECTOR (RGB) - TV
• You may find it useful to have the
manuals supplied with your other
components handy when connecting
this player.
This is a combined audio and video output
for connection to a TV that has a SCART
input. Connect using a SCART cable. The
type of video output can be switched to suit
your TV. See page 12 and 41.
• If you come across any unfamiliar terms
in this section of the manual, take a look
at the Glossary starting on page 51.
10
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting Up
02
Easy connections
A/V IN
TV
DIGITAL AUDIO OUT
COAXIAL
AUDIO OUT
L
AV CONNECTOR (RGB)-TV
R
OPTICAL
S
VIDET
To power outlet
The setup described here is a basic setup
that allows you to play discs using just the
cables supplied with the player. In this setup,
stereo audio is played through the speakers
in your TV.
1
Connect the VIDEO OUT and AUDIO
OUT jacks to a set of A/V inputs on your
TV.
Use the supplied audio/video cable, connect-
ing the red and white plugs to the audio
outputs and the yellow plug to the video
output. Make sure you match up the left and
right audio outputs with their corresponding
inputs for correct stereo sound.
• This player is equipped with copy
protection technology. Do not connect
this player to your TV via a VCR (or your
VCR via this player) using AV cables, as
the picture from this player will not
appear properly on your TV. (This player
may also not be compatible with some
combination TV/VCRs for the same
reason; refer to the manufacturer for
more information.)
See below if you want to use a SCART cable
for the audio/video connection, or an S-Video
cable for the video connection.
2
Connect the supplied AC power cord
to the AC IN inlet, then plug into a power
outlet.
11
En
Download from Www.Somanuals.com. All Manuals Search And Download.
02
Connecting Up
Connecting using the AV
connector output
• Before unplugging the player from the
power outlet, make sure you first switch
it into standby using either the front
panel STANDBY/ON button, or the
remote control, and wait of the -OFF-
message to disappear from the player’s
display.
If your TV has a SCART-type AV input, you
can use a SCART cable to connect this
player to your TV. This type of connection
carries both the sound and the picture, so
there’s no need to connect up the AUDIO
OUT L/R and VIDEO OUT jacks.
• For the above reasons, do not plug this
player into a switched power supply
found on some amplifiers and AV
receivers.
1
Use a SCART cable (not supplied) to
connect the AV CONNECTOR (RGB)-TV to
an AV input on your TV.
SCART
Connecting using the S-Video
output
If your TV has an S-Video input, you can use
this instead of the standard (composite)
output for a better quality picture.
TV
DIGITAL AUDIO OUT
COAXIAL
AUDIO OUT
L
AV CONNECTOR (RGB)-TV
1
Use an S-Video cable (not supplied)
R
OPTICAL
to connect the S-VIDEO OUT to an
S-Video input on your TV (or monitor or
AV receiver).
S
VIDEO OUT
Line up the small triangle above the jack
with the same mark on the plug before
plugging in.
This connector can output standard (com-
posite), S-Video or RGB component video.
The default setting is standard, which should
work with all TVs. Consult the manual that
came with your TV to see if you can use one
of the higher quality settings. See page 41
for how to change the video output.
S-VIDEO
INPUT
TV
• SCART cables are available in several
configurations. Make sure that the one
you get will work with this player and
your TV/monitor. You can find the pin
assignments on page 54.
DIGITAL AUDIO OUT
COAXIAL
AUDIO OUT
L
AV CONNECTOR (RGB)-TV
R
OPTICAL
VIDEO OUT
12
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting Up
02
For a coaxial connection, use a coaxial cable
(similar to the supplied video cable) to
connect the COAXIAL DIGITAL OUT jack to a
coaxial input on your AV receiver.
Connecting to an AV
receiver
To enjoy multichannel surround sound you
need to connect this player to an AV receiver
using a digital output. The DV-454 has both
coaxial and optical digital jacks; use which-
ever is convenient. The DV-350 has only a
coaxial jack.
2
Connect the analog AUDIO OUT L/R
and VIDEO OUT jacks on this player to a
set of analog audio and video inputs on
your AV receiver.
In addition to a digital connection, we
recommend also connecting using the
stereo analog connection.
AV receiver
AUDIO/
You’ll probably also want to connect a video
output to your AV receiver. You can use any
of the video outputs available on this player
(the illustration shows a standard (compos-
ite) connection).
VIDEO INPUT
DIGITAL AUDIO OUT
COAXIAL
AUDIO OUT
L
AV CONNECTOR (RGB)-TV
R
OPTICAL
1
Connect one of DIGITAL OUT jacks on
S
VIDEO
this player to a digital input on your AV
receiver.
DIGITAL IN
OPTICAL
The diagram shows standard video connec-
tions, but you can alternatively use the S-
Video or SCART cable connections if they’re
available.
AV receiver
DIGITAL IN
COAXIAL
3
Connect the AV receiver’s video
output to a video input on your TV.
DIGITAL OUT
XIAL
AUDIO OUT
L
AV CONNECTOR (RGB)-TV
• You usually have to connect the same
kind of video cable between your DVD
player and AV receiver, and between
your AV receiver and TV.
R
OPTICAL
S
VIDEO OUT
This enables you to listen to multichannel
surround sound.
For an optical connection, use an optical
cable (not supplied) to connect the OPTICAL
DIGITAL OUT jack to an optical input on your
AV receiver.
13
En
Download from Www.Somanuals.com. All Manuals Search And Download.
02
Connecting Up
• My TV doesn’t have any inputs to
connect the DVD player. How can I watch
DVDs?
Unfortunately, if your TV has no inputs
you can’t use this player with it.
• My VCR is already connected to my TV, so
there aren’t any spare inputs. What
should I do?
If all your TV’s inputs are already in use,
you can buy a video input selector from
an electronics store, which effectively
gives you more inputs.
• My TV only has one input for the sound.
What should I plug it into?
If you don’t mind mono sound, you can
buy a stereo RCA-to-mono RCA cable
from an electronics store. Connect the
stereo end to this player and the mono
end to your TV.
If you want stereo sound, connect this
player to your amplifier or stereo system
using a stereo audio cable.
• I connected the DVD player to my AV
receiver, and although the sound is fine,
there’s no picture. What did I do wrong?
Make sure that the type of video
connection from the DVD player to your
AV receiver is the same as that from the
receiver to your TV. Most AV receivers
won’t convert from one kind of connec-
tion to another.
14
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Controls and Displays
03
Front panel
1
2
3
4
5
OPEN/CLOSE
0
STANDBY/ON
Î
3
4
1
¡
¢
7
8
DV-350
10
9
8
7
6
3
1
2
4
5
OPEN/
CLOSE
0
3
Î
1
4
¡
¢
7
8
STANDBY/ON
DV-454
10
9
8
7
6
7
8
1
STANDBY/ON
Press to switch the player on or into standby
Press to pause playback. Press again to
restart
2
3
Disc tray
8
7
0 OPEN/CLOSE
Press to stop the disc (you can resume
Press to open or close the disc tray
playback by pressing 3 (play))
4
Remote control sensor
9
¡ ¢
The remote control has a range of up to
about 7m
• Press and hold for fast forward scanning
• Press to jump to the next chapter or track
5
Display
10 4 1
• Press and hold for fast reverse scanning
See page 16 for a description of the display
6
3
• Press to jump back to the beginning of the
current chapter or track, then to previous
chapters/tracks
Press to start or resume playback
15
En
Download from Www.Somanuals.com. All Manuals Search And Download.
03
Controls and Displays
Display
1
2
3
4
5
6
7
8
12 11 10
9
1
DTS
7
CHP
Lights when a DTS soundtrack is playing
Indicates that the character display is
showing a DVD chapter number
2
8
REMAIN
Lights during multi-angle scenes on a DVD
disc
Lights when the character display is showing
the time or number of tracks/titles/chapters
remaining
3
GUI (Graphical User Interface)
Lights when a menu is displayed on-screen
9
Character display
4
TITLE
10 8
Indicates that the character display is
showing a DVD title number
Lights when a disc is paused
11 3
5
Lights when a disc is playing
Lights when 2V/TruSurround is selected
12 2D
6
TRK
Lights when a Dolby Digital soundtrack is
playing
Indicates that the character display is
showing a CD or Video CD track number
16
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Controls and Displays
Remote control
03
1
STANDBY/ON
Press to switch the player on or into standby
2
AUDIO
Press to select the audio channel or
language (pages 34–35)
STANDBY/ON
AUDIO
OPEN/CLOSE
3
SUBTITLE
0
1
2
4
14
15
16
17
Press to select a subtitle display (page 34)
SUBTITLE
ANGLE
CLEAR
ENTER
4
5
Number buttons
TOP MENU
3
2
3
6
9
1
4
Press to display the top menu of a DVD disc
5
8
0
6 ENTER & cursor control buttons
7
Use to navigate on-screen displays and
menus. Press ENTER to select an option or
execute a command
TOP MENU
MENU
18
5
6
ENTER
7
SETUP
SETUP
RETURN
Press to display (or exit) the on-screen
display
7
8
19
20
E/
/e
1
3
¡
9
/e
8
1 and
4
8
7
¢
10
21
Use for reverse slow motion playback, frame
reverse and reverse scanning. See page 28
11
22
PLAY MODE SURROUND ZOOM
DISPLAY
12
13
23
24
9
3
Press to start or resume playback
10 4
Press to jump to the beginning of the current
chapter or track, then to previous chapters/
tracks
11 8
Press to pause playback; press again to
restart
17
En
Download from Www.Somanuals.com. All Manuals Search And Download.
03
Controls and Displays
12 PLAY MODE
18 MENU
Press to display the Play Mode menu
(pages 29–34) (You can also get to the Play
Mode menu by pressing SETUP and select-
ing Play Mode)
Press to display a DVD disc menu, or the
Disc Navigator if a CD, Video CD or MP3 disc
is loaded
19 RETURN
13 SURROUND
Press to return to a previous menu screen
Press to activate/switch off 2V/TruSurround
E/
20 ¡ and
14 0 OPEN/CLOSE
Press to open or close the disc tray
Use for forward slow motion playback, frame
advance and forward scanning. (page 28)
15 ANGLE
Press to change the camera angle during
DVD multi-angle scene playback (page 35)
21 ¢
Press to jump to the next chapter or track
22 7
16 CLEAR
Press to clear a numeric entry
Press to stop the disc (you can resume
playback by pressing 3 (play))
17 ENTER
23 DISPLAY
Press to display information about the disc
playing (page 36)
Use to select menu options, etc. (works
exactly the same as the ENTER button in 6
above)
24 ZOOM
Press to change the zoom level (page 35)
18
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
Switching on
04
Let’s Get Started
When you switch on the player for the first
time, you should see a welcome screen
displayed on your TV. From here you can set
up the language and the kind of TV you have,
then either use the Setup Navigator to make
more settings, or jump right in and start
playing some discs.
After making sure that everything is con-
nected properly and that the player is
plugged in, press STANDBY/ON on the
front panel, or on the remote control to
switch the player on.
Also, switch on your TV and make sure that it
is set to the input you connected the DVD
player to.
STANDBY/ON
OPEN/
CLOSE
0
ENTER
3
Î
1
4
¡
¢
7
8
GUIDE
RETURN
STANDBY/ON
DV-454
1
Use the
/
(cursor up/down)
buttons to choose a language, then press
ENTER.
• My DVD player switches on but there is
nothing displayed on my TV.
Make sure that the TV is set to the
correct video input (not a TV channel).
For example, if you connected this
player to the VIDEO 1 inputs on your TV,
switch your TV to VIDEO 1.
Hello!
Select the display language
using the cursor keys on the remote
English
français
Deutsch
Italiano
Español
Choose one then press Enter
• This player features a screen saver and
an auto power off function. If the player
is stopped and no button is pressed for
five minutes, the screen saver starts. If
the disc tray is closed but no disc is
playing and no control is pressed for 30
minutes, the player automatically goes
into standby.
2
Press ENTER to move on to the next
screen.
Welcome to Pioneer DVD!
Thank you for purchasing this Pioneer DVD player.
Before using, please take a little time
to setup your DVD player
Put the batteries into the remote control
Next, press the [ENTER] button on the remote control
and start the Let's Get Started Menu
Next
19
En
Download from Www.Somanuals.com. All Manuals Search And Download.
04
Getting Started
3
Use the
(cursor left/right)
/
Using the on-screen displays
buttons to select either ‘Wide screen
(16:9)’ or ‘Standard size screen (4:3)’
according to the kind of TV you have,
then press ENTER.
For ease of use, this player makes extensive
use of graphical on-screen displays (OSDs).
You should get used to the way these work as
you’ll need to use them when setting up the
player, using some of the playback features,
such as program play, and when making
more advanced settings for audio and video.
Let's Get Started Menu
All the screens are navigated in basically the
same way, using the cursor buttons to
change the highlighted item and pressing
ENTER to select it.
What kind of TV do you have?
Use the
/
cursor buttons
to choose, then press [ENTER]
Wide screen (16:9)
Standard size screen (4:3)
• Throughout this manual, ‘Select’ means
use the cursor buttons to highlight an
item on-screen, then press ENTER.
4
Press ENTER again to finish setting up.
Let's Get Started Menu
ENTER
Setup complete
If you're finished setting up,
choose [Complete],
to start again choose [Back]
ENTER
Complete
Back
SGEUTIUDPE
RETURN
• Select Back then press ENTER if you
want to go back and change the setting
you just made.
Button
SETUP
What it does
Display/exit the on-screen
display
Changes the highlighted
menu item
ENTER
Selects the highlighted menu
item (both ENTER buttons
work in exactly the same way)
RETURN
Returns to the main menu
without saving changes
20
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
04
4
Select a DVD language.
Some DVD discs feature on-screen menus,
soundtracks and subtitles in several lan-
guages. Set your preferred language here.
• The button guide at the bottom of every
OSD screen shows you which buttons
you’ll need to use for that screen.
Setup Navigator
Language Settings
Audio Out Settings
AV Receiver Func.
DVD Language
English
Setting up with the Setup
Navigator
French
German
Italian
Spanish
Other Language
Using the Setup Navigator you can make a
number of other initial settings for this
player. We recommend using the Setup
Navigator, especially if you connected this
player to an AV receiver for playing surround
sound. To answer some of the questions
about digital audio formats you may need to
look at the instructions that came with your
AV receiver.
• Note that the language you choose here
may not be available on all discs.
• If you want to select a language other
than those listed, select Other
Language. See Selecting languages
using the language code list on page 51
for detailed information.
1
If a disc is playing, press 7 (stop).
Also turn on your TV and make sure that it is
set to the correct video input.
5
Did you connect this player to an
amplifier or AV receiver?
Select Connected or Not Connected.
2
Press SETUP.
The on-screen display (OSD) appears.
Setup Navigator
Language Settings
Audio Out Settings
AV Receiver Func.
AV Receiver
Connected
Not Connected
Audio Settings
Play Mode
Disc Navigator
Setup Navigator
Initial Settings
• If you selected Not Connected here,
that completes setup using the Setup
Navigator. Press ENTER to exit.
3
Select ‘Setup Navigator’.
Audio Settings
Play Mode
Disc Navigator
Setup Navigator
Initial Settings
21
En
Download from Www.Somanuals.com. All Manuals Search And Download.
04
Getting Started
6
Did you connect this player to an AV
9
Is your AV receiver MPEG compatible?
Select Compatible, Not Compatible or
receiver using a digital output?
Select Connected or Not Connected.
Don’t Know.
Setup Navigator
Setup Navigator
Language Settings
Audio Out Settings DTS
AV Receiver Func. MPEG
Dolby Digital
Language Settings
AV Receiver
Compatible
Connected
Not Compatible
Don't Know
Not Connected
Audio Out Settings Digital Audio Out
AV Receiver Func.
• If you selected Not Connected here,
that completes setup using the Setup
Navigator. Press ENTER to exit.
10 Is your AV receiver compatible with
96kHz Linear PCM audio?
Select Compatible, Not Compatible or
Don’t Know.
7
Is your AV receiver Dolby Digital
compatible?
Select Compatible, Not Compatible or
Setup Navigator
Don’t Know.
Language Settings
Audio Out Settings DTS
AV Receiver Func. MPEG
96kHz Linear PCM
Dolby Digital
Compatible
Not Compatible
Don't Know
Setup Navigator
Language Settings
Audio Out Settings
AV Receiver Func.
Dolby Digital
Compatible
Not Compatible
Don't Know
11 Press ENTER to complete the setup, or
press SETUP to quit the Setup Navigator
without making any changes.
8
Is your AV receiver DTS compatible?
Setup Navigator
Select Compatible, Not Compatible or
Don’t Know.
Language Settings
Audio Out Settings DTS
AV Receiver Func. MPEG
96kHz Lin
Dolby Digital
Compatible
le
Settings complete
Press ENTER to exit
Setup Navigator
ENTER
Language Settings
Audio Out Sttings
AV Receiver Func.
Dolby Digital
DTS
Compatible
Not Compatible
Don't Know
Congratulations, setup is complete!
22
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
Playing discs
04
3
Load a disc.
Load a disc with the label side facing up,
using the disc tray guide to align the disc (if
you’re loading a double-sided DVD disc, load
it with the side you want to play face down).
The basic playback controls for playing DVD,
CD, Video CD and MP3 discs are covered
here. Further functions are detailed in the
next chapter.
STANDBY/ON
OPEN/CLOSE
0
2
5
8
3
6
9
1
4
7
ENTER
0
ENTER
4
Press 3 (play) to start playback.
If you’re playing a DVD or Video CD, a menu
may appear. See pages 25, 26 for how to
navigate these.
3
¡
¢
1
4
8
7
If you’re playing an MP3 disc, it may take a
few seconds before playback starts, depend-
ing on the complexity of the file structure on
the disc.
• After I load a DVD disc, it ejects automati-
cally after a few seconds!
1
If the player isn’t already on, press
STANDBY/ON to switch it on.
Most likely, the disc is the wrong region
for your player. The region number
should be printed on the disc; check it
against the region number of the player
(which you can find on the rear panel).
See also page 9.
If you’re playing a DVD or Video CD, also turn
on your TV and make sure that it is set to the
correct video input.
2
Press 0 OPEN/CLOSE to open the disc
tray.
If the region number is OK, it may be
that the disc is damaged or dirty. Clean
the disc and look for signs of damage.
See also page 47.
23
En
Download from Www.Somanuals.com. All Manuals Search And Download.
04
Getting Started
• Why won’t the disc I loaded play?
Basic playback controls
The table below shows the basic controls on
the remote for playing discs. The folllowing
chapter covers more playback features in
more detail.
First check that you loaded the disc the
right way up (label side up), and that it’s
clean and not damaged. See page 47
for information on cleaning discs.
If a disc loaded correctly won’t play, it’s
probably an incompatible format or disc
type, such as DVD-Audio or DVD-ROM.
See page 8 for more on disc
Button
What it does
3
Starts playback.
DVD and Video CD: if the
display shows RESUME,
playback starts from the
resume point.
compatibility.
• I have a widescreen TV so why are there
black bars at the top and bottom of the
screen when I play some discs?
8
7
Pauses a disc that’s playing,
or restarts a paused disc.
Some movie formats are such that even
when played on a widescreen TV, black
bars are necessary at the top and
bottom of the screen. This is not a
malfunction.
Stops playback.
DVD and Video CD: Display
shows RESUME. Press 7
(stop) again to cancel the
resume function.
• I have a standard (4:3) TV and set the
player to show widescreen DVDs in pan &
scan format, so why do I still get black
bars top and bottom with some discs?
1
¡
4
Press to start fast reverse
scanning. Press 3 (play) to
resume normal playback.
Some discs override the display
Press to start fast forward
scanning. Press 3 (play) to
resume normal playback.
preferences of the player, so even if you
have 4:3 (Pan & Scan) selected, those
discs will still be shown in letterbox
format. This is not a malfunction.
Skips to the start of the
current track or chapter, then
to previous tracks/chapters.
• My AV receiver is definitely compatible
with 96kHz Linear PCM audio, but it
doesn’t seem to work with this player.
What’s wrong?
¢
Skips to the next track or
chapter.
Numbers
Use to enter a title/track
number. Press ENTER to select
(or wait a few seconds).
• If the disc is stopped, play-
back starts from the selected
title (for DVD) or track number
(for CD/Video CD/MP3 ).
• If the disc is playing,
playback jumps to the start of
the selected chapter or track.
For digital copy-protection purposes,
some 96kHz DVD discs are
automatically downsampled to 48kHz.
This is not a malfunction. With these
kinds of discs, if you want to enjoy high-
quality analog audio, set Digital Out to
Off (page 39), and 96kHz PCM Out to
96kHz (page 40).
24
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
04
Front panel controls
The 3 (play), 7 (stop), and 8 (pause) buttons
on the front panel work in exactly the same
way as their remote control equivalents. The
combined scan/skip buttons on the front
panel (4 1 and ¡ ¢) work slightly
differently from the remote buttons.
2
5
8
3
6
9
1
4
ENTER
0
7
TOP MENU
MENU
OPEN/
CLOSE
0
ENTER
3
1
4
¡
¢
7
8
RETURN
STANDBY/ON
DV-454
4 1
¡ ¢
Press and hold for fast scan; press for track/
chapter skip.
Button
What it does
TOP MENU
Displays the ‘top menu’ of a
DVD disc—this varies with the
disc.
• You may find with some DVD discs that
some playback controls don’t work in
certain parts of the disc. This is not a
malfunction.
MENU
Displays a DVD disc menu—
this varies with the disc and
may be the same as the ‘top
menu’.
• Track skip and number buttons for track
selection do not work with unfinalized
CD-R/RW discs.
Moves the cursor around the
screen.
DVD-Video disc menus
ENTER
Selects the current menu
option.
Many DVD-Video discs contain menus from
which you can select what you want to
watch. They may give access to additional
features, such as subtitle and audio lan-
guage selection, or special features such as
slideshows. See the disc packaging for
details.
RETURN
Numbers
Returns to the previously
displayed menu screen.
Highlights a numbered menu
option (some discs only).
Press ENTER to select.
Sometimes DVD-Video menus are displayed
automatically when you start playback;
others only appear when you press MENU or
TOP MENU.
25
En
Download from Www.Somanuals.com. All Manuals Search And Download.
04
Getting Started
Video CD PBC menus
Some Video CDs have menus from which
you can choose what you want to watch.
These are called PBC (Playback control)
menus.
You can play a PBC Video CD without having
to navigate the PBC menu by starting
playback using a number button to select a
track, rather than the 3 (play) button.
2
5
8
3
6
9
1
ENTER
4
0
7
ENTER
RETURN
4
¢
Button
What it does
RETURN
Displays the PBC menu.
Numbers
Use to enter a numbered
menu option. Press ENTER to
select.
4
¢
Displays the previous menu
page (if there is one).
Displays the next menu page
(if there is one).
26
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing Discs
Introduction
05
2
Select what you want to play.
Depending on the type of disc you have
loaded, the Disc Navigator looks slightly
different.
Most of the features described in this
chapter make use of on-screen displays. For
an explanation of how to navigate these, see
Using the on-screen displays on page 20.
The screen for DVD discs shows the titles on
the left and the chapters on the right. Select
a title, or a chapter within a title.
Many of the functions covered in this chapter
apply to DVD discs, Video CDs, CDs and
MP3 discs, although the exact operation of
some varies slightly with the kind of disc
loaded.
Disc Navigator
Title 1-10
Chapter 1-3
DVD
Title 01
Title 02
Title 03
Title 04
Title 05
Title 06
Title 07
Title 08
Chapter 001
Chapter 002
Chapter 003
Some DVD discs restrict the use of some
functions (random or repeat, for example).
This is not a malfunction.
When playing Video CDs, some of the
functions are not available during PBC
playback. If you want to use them, start the
disc playing using a number button to select
a track.
The screen for CDs and Video CDs shows a
list of tracks.
Disc Navigator
Track 1-10
Using the Disc Navigator to
browse the contents of a disc
CD
Track 01
Track 02
Track 03
Track 04
Track 05
Track 06
Track 07
Track 08
Use the Disc Navigator to browse through
the contents of a disc to find the part you
want to play. You can use the Disc Navigator
when a disc is playing or stopped.
The screen for an MP3 disc shows the folder
names on the left and the track names on
the right (note that if there are more than 16
folders or names that contain accented or
non-roman characters, tracks and folders
may show up with generic names – F_033,
T_035, etc.).
1
Press SETUP and select ‘Disc Naviga-
tor’ from the on-screen display.
Alternatively, if a CD, Video CD or MP3 disc
is loaded, you can press MENU, which takes
you straight to the Disc Navigator screen.
Select a folder, or a track within a folder.
Audio Settings
Disc Navigator
Folder 1-17
Track 1-10
Play Mode
Disc Navigator
Setup Navigator
MP3
001. ACP
002. Nth Degree
003. Pfeuti
001. Gravity deluxe
002.Tesla's patent
003. Border dispute
004. Delayed by rain
005. Accident incident
006. Pigeon post
Initial Settings
004. Live
005. Glitch music
006. CodHead
007.Thermo
008. Missing Man
007. Outernational
008. Vacuum tube
Playback starts after you press ENTER.
27
En
Download from Www.Somanuals.com. All Manuals Search And Download.
05
Playing Discs
Playing in slow motion
You can play DVDs and Video CDs at four
different forward slow motion speeds, and
DVDs also at two reverse speeds.
• The Disc Navigator is not available
unless there is a disc loaded.
• It’s not possible to use the Disc Naviga-
tor when playing a Video CD in PBC
mode, or an unfinalized CD-R/RW disc.
1
During playback, press 8 (pause).
/e E/
until
2
Press and hold
or
• Another way to find a particular place on
a disc is to use one of the search modes.
See Searching a disc on page 34.
slow motion playback starts.
• The slow motion speed is shown on-
screen.
• There is no sound during slow motion
playback.
Scanning discs
You can fast-scan discs forward or backward
at various different speeds.
3
Press repeatedly to change the slow
motion speed.
• The slow motion speed is displayed on-
screen.
1
During playback, press 1 or ¡ to
start scanning.
4
To resume normal playback, press 3
2
Press repeatedly to increase the
(play).
scanning speed.
• MP3s can only be scanned at one speed.
• The scanning speed is shown on-screen.
• Video CD only supports forward slow
motion playback.
3
To resume normal playback, press 3
(play).
• The picture quality during slow motion
playback is not as good as during
normal playback.
• Sound can be heard while scanning
audio CDs and MP3 discs.
• Depending on the disc, normal playback
may automatically resume when a new
chapter is reached.
• When scanning a Video CD or MP3
track, playback automatically resumes
at the end or beginning of the track.
• There is no sound while scanning DVDs
and Video CDs, and no subtitles while
scanning DVDs.
Frame advance/frame reverse
You can advance or back up a DVD disc
frame-by-frame. With Video CDs, you can
only use frame advance.
• Depending on the disc, normal playback
may automatically resume when a new
chapter is reached on a DVD disc.
1
During playback, press 8 (pause).
/e E/
to reverse or
2
Press
or
advance a frame at a time.
3
To resume normal playback, press 3
(play).
28
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing Discs
05
3
Press ENTER on ‘B(End Point)’ to set
the loop end point.
• The picture quality when using frame
reverse is not as good as frame ad-
vance.
Play Mode
A-B Repeat
Repeat
A(Start Point)
• Depending on the disc, normal playback
may automatically resume when a new
chapter is reached.
B(End Point)
Off
Random
Program
Search Mode
• When changing direction with a DVD
disc, the picture may ‘move’ in an
unexpected way. This is not a
malfunction.
After pressing ENTER, playback jumps back
to the start point and plays the loop.
• The minimum loop time is 2 seconds.
Looping a section of a disc
4
To resume normal playback, select
The A-B Repeat function allows you to
specify two points (A and B) within a track
(CD and Video CD) or title (DVD) that form a
loop which is played over and over.
‘Off’ from the menu.
Using repeat play
A-B Repeat is not available with MP3 discs,
Video CDs in PBC mode, or unfinalized
CD-R/RW discs.
There are various repeat play options,
depending on the kind of disc loaded. It’s
also possible to use repeat play together with
program play to repeat the tracks/chapters in
the program list (see Creating a program list
on page 31).
1
During playback, press PLAY MODE
and select ‘A-B Repeat’ from the list of
functions on the left.
Repeat play is not available with Video CDs
in PBC mode, or unfinalized CD-R/RW discs.
Play Mode
1
During playback, press PLAY MODE
A-B Repeat
Repeat
A(Start Point)
B(End Point)
Off
and select ‘Repeat’ from the list of
functions on the left.
Random
Program
Search Mode
Play Mode
A-B Repeat
Repeat
Title Repeat
Chapter Repeat
Repeat Off
Random
2
Press ENTER on ‘A(Start Point)’ to set
Program
the loop start point.
Search Mode
Play Mode
A-B Repeat
Repeat
A(Start Point)
B(End Point)
Off
Random
Program
Search Mode
29
En
Download from Www.Somanuals.com. All Manuals Search And Download.
05
Playing Discs
2
Select a repeat play option.
Using random play
If program play is active, select Program
Repeat to repeat the program list, or Repeat
Off to cancel.
Use the random play function to play titles or
chapters (DVD) or tracks (CD, Video CD and
MP3 discs) in a random order.
For DVD discs, select Title Repeat or
Chapter Repeat (or Repeat Off).
You can set the random play option when a
disc is playing or stopped.
1
Press PLAY MODE and select ‘Random’
Play Mode
from the list of functions on the left.
A-B Repeat
Repeat
Title Repeat
Chapter Repeat
Repeat Off
Random
Play Mode
Program
Search Mode
A-B Repeat
Repeat
Random Title
Random Chapter
Random Off
Random
Program
Search Mode
For CDs and Video CDs, select Disc Repeat
or Track Repeat (or Repeat Off).
Play Mode
2
Select a random play option.
For DVD discs, select Random Title or
Random Chapter (or Random Off)
A-B Repeat
Repeat
Disc Repeat
Track Repeat
Repeat Off
Random
Program
Search Mode
Play Mode
A-B Repeat
Repeat
Random Title
Random Chapter
Random Off
Random
For MP3 discs, select Disc Repeat, Folder
Program
Repeat or Track Repeat (or Repeat Off).
Search Mode
Play Mode
For CDs, Video CDs and MP3 discs, select
On or Off to switch random play on or off.
(Note that when used with MP3 discs, only
tracks from within the current folder are
played.)
A-B Repeat
Repeat
Disc Repeat
Folder Repeat
Track Repeat
Repeat Off
Random
Program
Search Mode
Play Mode
A-B Repeat
Repeat
On
Off
• You can’t use repeat and random play at
the same time.
Random
Program
Search Mode
• If you switch camera angle during
repeat play, repeat play is canceled.
30
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing Discs
05
2
Select ‘Create/Edit’ from the list of
program options.
• To stop the disc and cancel random
playback, press 7 (stop).
Play Mode
• To cancel random playback without
stopping playback, press CLEAR. The
disc will play to the end, then stop.
A-B Repeat
Repeat
Create/Edit
Playback Start
Playback Stop
Program Delete
Program Memory
Random
Program
Search Mode
‰ Off
• During random play, the 4 and ¢
buttons function a little differently to
normal: 4 returns to the beginning of
the current track/chapter. You can't go
back further than this. ¢ selects
another track/chapter at random from
those remaining.
The Program edit screen that appears
depends on the kind of disc loaded.
On the left side is the program list, then to
the right is a list of titles (if a DVD disc is
loaded), tracks (for CDs and Video CDs), or
folder names (for MP3 discs). On the far
right is a list of chapters (for DVD) or track
names (for MP3).
• You can't use random play together with
program or repeat play.
3
Select a title, chapter, folder or track
• You can’t use random play with Video
CDs playing in PBC mode, or unfinalized
CD-R/RW discs.
for the current step in the program list.
For a DVD disc, you can add a whole title, or
a chapter within a title to the program list.
• To add a title, select the title.
Creating a program list
This feature lets you program the play order
of titles/chapters/folders/tracks on a disc.
Program
Program Step
Title 1~38
Chapter 1~4
01. 01
02.
Title 01
Title 02
Title 03
Title 04
Title 05
Title 06
Title 07
Title 08
Chapter 001
Chapter 002
Chapter 003
Chapter 004
Program play is not available with Video CDs
playing in PBC mode, or unfinalized
CD-R/RW discs.
03.
04.
05.
06.
07.
1
Press PLAY MODE and select ‘Pro-
08.
gram’ from the list of functions on the
left.
Play Mode
A-B Repeat
Repeat
Create/Edit
Playback Start
Playback Stop
Program Delete
Program Memory
Random
Program
Search Mode
‰ Off
31
En
Download from Www.Somanuals.com. All Manuals Search And Download.
05
Playing Discs
• To add a chapter, first highlight the title,
then press (cursor right) and select a
chapter from the list.
• To add a track, first find the folder, then
press (cursor right) and select a track
name from the list.
Program
Program
Program Step
Title 1-38
Chapter 1-4
Program Step
Folder 1-6
Track 1-10
01. 01-003
02.
Title 01
Title 02
Title 03
Title 04
Title 05
Title 06
Title 07
Title 08
Chapter 001
Chapter 002
Chapter 003
Chapter 004
01. 001-003
001. ACP
001. Gravity deluxe
002.Tesla's patent
003. Border dispute
004. Delayed by rain
005. Accident incident
006. Pigeon post
02.
03.
04.
05.
06.
07.
08.
002. Nth Degree
003. Pfeuti
03.
04.
004. Live
05.
005. Glitch music
006. CodHead
06.
07.
007. Outernational
008. Vacuum tube
08.
For a CD or Video CD, select a track to add to
the program list.
After pressing ENTER to select the title/
chapter/folder/track, the step number
automatically moves down one.
Program
4
Repeat step 3 to build up a program
Program Step
Track 1~12
list.
01. 04
02.
Track 01
Track 02
Track 03
Track 04
Track 05
Track 06
Track 07
Track 08
A program list can contain up to 24 titles/
chapters/folders/tracks.
03.
04.
05.
06.
5
To play the program list, press 3
07.
08.
(play).
Program play remains active until you turn
off program play (see below), erase the
program list (see below), eject the disc or
switch off the player.
For an MP3 disc, you can add a whole folder,
or a track within a folder to the program list.
• To add a folder, select the folder.
Program
Program Step
Folder 1-6
Track 1-10
• To save your program list and exit the
program edit screen without starting
playback, press PLAY MODE or SETUP.
(Don’t press RETURN – your program
list won’t be saved.)
01. 001
02.
001. ACP
001. Gravity deluxe
002.Tesla's patent
003. Border dispute
004. Delayed by rain
005. Accident incident
006. Pigeon post
002. Nth Degree
003. Pfeuti
03.
04.
004. Live
05.
005. Glitch music
006. CodHead
06.
07.
007. Outernational
008. Vacuum tube
08.
• During program play, press ¢ to skip
to the next program step.
• Press CLEAR during playback to switch
off program play. Press while stopped to
erase the program list.
32
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing Discs
05
Editing a program list
Other functions available from
the program menu
As well as creating and editing a program
list, you can start program play, cancel
program play, erase the program list, and
memorize a program list from the Play Mode
menu.
After creating a program list, you can add,
delete and change steps.
1
Press PLAY MODE and select ‘Pro-
gram’ from the list of functions on the
left.
2
Select ‘Create/Edit’ from the list of
1
Press PLAY MODE and select ‘Pro-
program options.
gram’ from the list of functions on the
left.
3
To clear a step, highlight the step
number and press CLEAR.
Play Mode
4
To insert a step in the middle of the
program list, highlight the step where
you want the new step to appear, then
select a title/chapter/folder/track to add.
After pressing ENTER, the new step is
inserted into the list.
A-B Repeat
Repeat
Create/Edit
Playback Start
Playback Stop
Program Delete
Program Memory
Random
Program
Search Mode
‰ Off
5
To add a step to the end of the
program list, highlight the next free step
then select a title/chapter/folder/track to
add.
2
Select a program play function.
• Create/Edit – See above
• Playback Start – Starts playback of a
saved program list
• Playback Stop – Turns off program play,
but does not erase the program list
• Program Delete – Erases the program
list and turns off program play
• To save your program list and exit the
program edit screen without starting
playback, press PLAY MODE or SETUP.
• Program Memory (DVD only) – Select
On to save the program list for the disc
loaded. (Select Off to cancel the
• If you want to exit the program edit
screen without saving the changes you
made, press RETURN.
program memory for the disc loaded)
• Program lists are saved for the disc
loaded. When you load a disc with a
saved program list, program play is
automatically turned on.
• You can save program lists for up to 24
discs. After that, the oldest one is
replaced with the new one saved.
33
En
Download from Www.Somanuals.com. All Manuals Search And Download.
05
Playing Discs
4
Press ENTER to start playback.
Searching a disc
You can search DVD discs by title or chapter
number, or by time. CDs can be searched by
track number, and Video CDs by track
number or time. MP3 discs can be searched
by folder or track number.
• The disc must be playing in order to use
time search.
• Search functions are not available with
Video CDs in PBC mode, or unfinalized
CD-R/RW discs.
1
Press PLAY MODE and select ‘Search
Mode’ from the list of functions on the
left.
The search options that appear depend on
the kind of disc loaded. The screen below
shows the DVD search options.
Switching subtitles
Some DVD discs have subtitles in one or
more languages; the disc box will usually tell
you which subtitle languages are available.
You can switch subtitle language during
playback.
Play Mode
A-B Repeat
Repeat
Title Search
Chapter Search
Time Search
Random
1
Press SUBTITLE repeatedly to select a
Program
Search Mode
subtitle option.
Current / Total
Subtitle
1/2
English
• To set subtitle preferences, see Subtitle
Language on page 42.
2
3
Select a search mode.
Use the number buttons to enter a
title, chapter, folder or track number, or a
time.
Switching DVD audio
language
Play Mode
When playing a DVD disc recorded with
dialog in two or more languages, you can
switch audio language during playback.
A-B Repeat
Repeat
Title Search
Input Chapter
Chapter Search
Time Search
0
0
1
Random
Program
Search Mode
1
Press AUDIO repeatedly to select an
audio language option.
Current /Total
Audio
1/2
French
Dolby Digital 3/2.1CH
• For a time search, enter the number of
minutes and seconds into the currently
playing title (DVD) or track (Video CD)
you want playback to resume from. For
example, press 4, 5, 0, 0 to have
• To set audio language preferences, see
Audio Language on page 42.
playback start from 45 minutes into the
disc. For 1 hour, 20 minutes and 30
seconds, press 8, 0, 3, 0.
34
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing Discs
05
2
Use the cursor buttons to change the
Switching audio channel
when playing a Video CD
zoomed area.
You can change the zoom factor and the
zoomed area freely during playback.
When playing a Video CD, you can switch
between stereo, just the left channel or just
the right channel.
• If the navigation square at the top of the
screen disappears, press ZOOM again
to display it.
1
Press AUDIO repeatly to select an
audio channel option.
Audio
Stereo
• We do not recommend using DVD disc
menus when the screen is zoomed as
menu options will not be highlighted.
Zooming the screen
• If you are displaying subtitles, these will
disappear when the screen is zoomed.
They will reappear when you return the
screen to normal,
Using the zoom feature you can magnify a
part of the screen by a factor of 2 or 4, while
watching a DVD or Video CD.
1
During playback, use the ZOOM
button to select the zoom factor.
• Normal
Switching camera angles
Some DVD discs feature scenes shot from
two or more angles—check the disc box for
details.
• 2x
• 4x
Normal
When a multi-angle scene is playing, a
icon appears on screen to let you know that
other angles are available (this can be
switched off if you prefer—see page 44).
1
During playback (or when paused),
Zoom
2
Zoom 2
Zoom 4
press ANGLE to switch angle.
Zoom
4
• Since DVD and Video CD has a fixed
resolution, picture quality will deterio-
rate, especially at 4x zoom. This is not a
malfunction.
35
En
Download from Www.Somanuals.com. All Manuals Search And Download.
05
Playing Discs
Displaying disc information
Various track, chapter and title information,
as well as the video transmission rate for
DVD discs, can be displayed on-screen while
a disc is playing.
• You can see disc information (number of
titles/chapters, tracks, folders and so
on) from the Disc Navigator screen. See
Using the Disc Navigator to browse the
contents of a disc on page 27.
1
To show/switch the information
displayed, press DISPLAY.
When a disc is playing, the information
appears at the top of the screen. Keep
pressing DISPLAY to change the displayed
information.
• DVD displays
Play
DVD
3
Current / Total
11/38
Elapsed
2.05
Remain
4.57
Total
7.02
Title
French
Audio Dolby Digital 3/2.1CH
English
Subtitle
1
Angle
Play
DVD
3
Current / Total
Elapsed
2.05
Remain
4.57
Total
7.02
Chapter
Tr. Rate
11/38
8.6Mbps
• CD and Video CD displays
Play
CD
3
Current / Total
Elapsed
1.07
Remain
4.40
Total
5.47
Track
2/16
Play
Disc
CD
3
Elapsed
28.00
Remain
30.20
Total
58.20
• MP3 disc displays
Play
MP3
3
Current / Total
Elapsed
0.18
Remain
12.42
Total
13.00
Track
1/17
Track Name
Play
Outernational
MP3
3
Current / Total
Folder
2/7
Folder Name ACP
36
En
Download from Www.Somanuals.com. All Manuals Search And Download.
The Audio Settings Menu
06
Audio DRC
• Default setting: Off
• Audio DRC is only effective with Dolby
Digital audio sources.
When watching Dolby Digital DVDs at low
volume, it’s easy to lose the quieter sounds
completely—including some of the dialog.
Switching Audio DRC (Dynamic Range
Control) to On can help by bringing up the
quieter sounds, while controlling loud peaks.
• Audio DRC is only effective through the
digital output when Digital Out is set to
On, and Dolby Digital Out is set to
Dolby Digital > PCM. See page 39.
• The effect of Audio DRC depends on
your speakers and AV receiver settings.
How much of a difference you hear depends
on the material you’re listening to. If the
material doesn’t have wide variations in
volume, you may not notice much change.
Virtual Surround
• Default setting: Off
1
Press SETUP and select ‘Audio Set-
tings’ from the on-screen display.
Switch on Virtual Surround to enjoy surround
sound effects from just two speakers.
When you play a Dolby Digital soundtrack,
Virtual Dolby Digital, which uses
Audio Settings
TruSurround technology from SRS, produces
a deep, realistic 3D soundspace from a pair
of stereo speakers.
Play Mode
Disc Navigator
Setup Navigator
Initial Settings
2
Highlight Audio DRC, then use the
buttons (cursor left/right) to change
/
to ‘On’ or ‘Off’, as required.
Audio Settings
Audio DRC
Off
Off
Virtual Surround
3
Press ENTER to make the setting and
exit the Audio Settings screen.
37
En
Download from Www.Somanuals.com. All Manuals Search And Download.
06
The Audio Settings Menu
1
Press SETUP and select ‘Audio Set-
tings’ from the on-screen display.
• Virtual Surround doesn’t work with DTS
or 96kHz linear PCM audio, or during
MP3 playback, through either the
analog or digital outputs.
Audio Settings
• If the player is outputting Dolby Digital
or MPEG bitstream audio (in other
words, no conversion to PCM), Virtual
Surround has no effect on the audio
from the digital output. See pages 39–
40 for how to set up the digital output
formats.
Play Mode
Disc Navigator
Setup Navigator
Initial Settings
2
Highlight Virtual Surround, then use
/
the
buttons (cursor left/right) to
change to ‘2V/TruSurround’ or ‘Off’, as
required.
• How good the surround effect is varies
with the disc.
Audio Settings
Audio DRC
Off
Off
Virtual Surround
3
Press ENTER to make the setting and
exit the Audio Settings screen.
• You can also use the SURROUND
button on the remote control to switch
Virtual Surround on (2V/
TruSurround)/Off.
38
En
Download from Www.Somanuals.com. All Manuals Search And Download.
The Initial Settings Menu
07
Using the Initial Settings
menu
Digital Audio Out settings
The Initial Settings menu gives you complete
control in setting up your DVD player,
Digital Out
• Default setting: On
including audio, and video output settings,
audience limitation settings, among others.
You only need to make this setting if you
connected this system to an AV receiver (or
other component) using one of the digital
outputs.
If an option is grayed out it means that it
cannot be changed at the current time. This
is usually because a disc is playing. Stop the
disc, then change the setting.
Initial Settings
1
Press SETUP and select ‘Initial Set-
Digital Audio Out
Video Output
Language
Digital Out
On
Off
tings’ from the on-screen display.
Dolby Digital Out
DTS Out
Display
96 kHz PCM Out
MPEG Out
Options
Audio Settings
Play Mode
Disc Navigator
Setup Navigator
If at any time you need to switch off the
digital audio output, set this to Off, other-
wise leave it On.
Initial Settings
Note that you can’t switch on/off the optical
and coaxial outputs individually.
2
Select the setup category from the list
on the left, then select an item from the
menu list to the right.
Dolby Digital Out
• Default setting: Dolby Digital
3
Make the setting you want.
You only need to make this setting if you
connected this system to an AV receiver (or
other component) using one of the digital
outputs.
• The language options shown in the on-
screen display illustrations on the
following pages may not correspond to
those available in your country or
region.
Initial Settings
Digital Audio Out
Video Output
Language
Digital Out
Dolby Digital
Dolby Digital Out
DTS Out
Dolby Digital > PCM
Display
96 kHz PCM Out
MPEG Out
Options
If your AV receiver (or other connected
component) is Dolby Digital compatible, set
to Dolby Digital, otherwise set to Dolby
Digital > PCM.
39
En
Download from Www.Somanuals.com. All Manuals Search And Download.
07
The Initial Settings Menu
If your AV receiver (or other connected
component) is compatible with high
sampling rates (96 kHz), set this to 96kHz,
otherwise set it to 96kHz > 48kHz (96 kHz
audio is converted to a more compatible 48
kHz). Check the manual that came with the
other component if you’re unsure whether it
is 96 kHz compatible.
DTS Out
• Default setting: Off
You only need to make this setting if you
connected this system to an AV receiver (or
other component) using one of the digital
outputs.
Initial Settings
Digital Audio Out
Video Output
Language
Digital Out
DTS
Off
MPEG Out
Dolby Digital Out
DTS Out
• Default setting: MPEG > PCM
Display
96 kHz PCM Out
MPEG Out
Options
You only need to make this setting if you
connected this system to an AV receiver (or
other component) using one of the digital
outputs.
If your AV receiver (or other connected
component) has a built-in DTS decoder, set
this to DTS, otherwise set to Off. Check the
manual that came with the other component
if you’re unsure whether it is DTS compat-
ible.
Initial Settings
Digital Audio Out
Video Output
Language
Digital Out
MPEG
Dolby Digital Out
DTS Out
MPEG > PCM
Display
96 kHz PCM Out
MPEG Out
Options
• If you set to DTS with a non-DTS
compatible amplifier, noise will be
output when you play a DTS disc.
If your AV receiver (or other connected
component) is compatible with MPEG audio,
set this to MPEG, otherwise set it to MPEG >
PCM (MPEG audio is converted to more
compatible PCM audio). Check the manual
that came with the other component if you’re
unsure whether it is MPEG audio compat-
ible.
96kHz PCM Out
• Default setting: 96kHz > 48kHz
You only need to make this setting if you
connected this system to an AV receiver (or
other component) using one of the digital
outputs.
Initial Settings
Digital Audio Out
Video Output
Language
Digital Out
96 kHz > 48kHz
96 kHz
Dolby Digital Out
DTS Out
Display
96 kHz PCM Out
MPEG Out
Options
40
En
Download from Www.Somanuals.com. All Manuals Search And Download.
The Initial Settings Menu
Video Output settings
07
and reconnect to the TV using either the
supplied audio/video cable, or an S-
Video cable (see pages 11 and 12 for
more on this).
TV Screen
• Default setting: 4:3 (Letter Box)
• SCART cables come in various configu-
rations. Make sure you use the correct
one for your TV/monitor. See page 54 for
the SCART pin assignment diagram.
Initial Settings
Digital Audio Out
Video Output
Language
4:3 (Letter Box)
4:3 (Pan&Scan)
16:9 (Wide)
TV Screen
AV Connector Out
S-Video Out
Initial Settings
Display
Options
Digital Audio Out
Video Output
Language
Video
S-Video
RGB
TV Screen
AV Connector Out
S-Video Out
Display
Options
If you have a widescreen TV, select the 16:9
(Wide) setting—widescreen DVD software is
then shown using the full screen area. When
playing software recorded in conventional
(4:3) format, the settings on your TV will
determine how the material is presented—
see the manual that came with your TV for
details on what options are available.
• Video – Standard video, compatible
with all TVs.
• S-Video – Higher quality, but check your
TV for compatibility.
• RGB – Best quality, but check your TV
for compatibility.
If you have a conventional TV, select either
4:3 (Letter Box) or 4:3 (Pan & Scan). In
Letter Box mode, widescreen software is
shown with black bars at the top and bottom
of the screen. Pan & Scan chops the sides off
widescreen material to make it fit the 4:3
screen (so even though the image looks
larger on the screen, you’re actually seeing
less of the picture). See also page 49.
S-Video Out
• Default setting: S2
You only need to make this setting if you
connected this player to your TV using an S-
Video cord.
Initial Settings
AV Connector Out
Digital Audio Out
Video Output
Language
TV Screen
S1
S2
• Default setting: Video
AV Connector Out
S-Video Out
You only need to make this setting if you
connected this player to your TV using the AV
SCART-type connector.
Display
Options
If you find that the picture is stretched or
distorted on the default S2 setting, try
changing it to S1.
• If you make a setting here that is
incompatible with your TV, the TV may
not display any picture at all. If this
happens either switch everything off
41
En
Download from Www.Somanuals.com. All Manuals Search And Download.
07
The Initial Settings Menu
Language settings
Subtitle Language
• Default setting: English
Audio Language
• Default setting: English
Initial Settings
Digital Audio Out
Video Output
Language
Audio Language
Subtitle Language
DVD Menu Lang.
Subtitle Display
English
French
Initial Settings
German
Display
Italian
Options
Spanish
Other Language
Digital Audio Out
Video Output
Language
Audio Language
Subtitle Language
DVD Menu Lang.
Subtitle Display
English
French
German
Display
Italian
Options
Spanish
Other Language
This setting is your preferred subtitle
language for DVD discs. If the language you
specify here is recorded on a disc, the
system automatically plays the disc with
those subtitles.
This setting is your preferred audio language
for DVD discs. If the language you specify
here is recorded on a disc, the system
automatically plays the disc in that lan-
guage.
The DVD format recognizes 136 different
languages. Select Other Language if you
want to specify a language other than those
listed. See also Selecting languages using the
language code list on page 51.
The DVD format recognizes 136 different
languages. Select Other Language if you
want to specify a language other than those
listed. See also Selecting languages using the
language code list on page 51.
• You can change or switch off the
subtitles on a DVD disc during playback
using the SUBTITLE button. (This does
not affect this setting.) See page 34.
• You can switch between the languages
recorded on a DVD disc during playback
using the AUDIO button. (This does not
affect this setting.) See page 34.
• Some DVD discs set the subtitle
language automatically when loaded,
overriding the subtitle language you set
in the Initial Settings menu.
• Some DVD discs set the audio language
automatically when loaded, overriding
the audio language you set in the Initial
Settings menu.
• Discs with two or more subtitle
languages usually allow you to select
the subtitle language from the disc
menu. Press MENU to access the disc
menu.
• Discs with two or more audio languages
usually allow you to select the audio
language from the disc menu. Press
MENU to access the disc menu.
42
En
Download from Www.Somanuals.com. All Manuals Search And Download.
The Initial Settings Menu
07
DVD Menu Language
• Default setting: w/Subtitle Lang.
Display settings
OSD Language
• Default setting: English
Initial Settings
Digital Audio Out
Video Output
Language
Audio Language
Subtitle Language
DVD Menu Lang.
Subtitle Display
w/Subtitle Lang.
English
Initial Settings
French
Display
German
Options
Italian
Digital Audio Out
Video Output
Language
OSD Language
On Screen Display
Angle Indicator
English
français
Deutsch
Italiano
Español
Spanish
Other Language
Display
Options
Some multilingual discs have disc menus in
several languages. This setting specifies in
which language the disc menus should
appear. Leave on the default setting for
menus to appear in the same language as
your Subtitle Language—see page 42.
This sets the language of this player’s on-
screen displays.
The DVD format recognizes 136 different
languages. Select Other Language if you
want to specify a language other than those
listed. See also Selecting languages using the
language code list on page 51.
On Screen Display
• Default setting: On
Initial Settings
Digital Audio Out
Video Output
Language
OSD Language
On Screen Display
Angle Indicator
On
Off
Subtitle Display
• Default setting: On
Display
Options
Initial Settings
This sets whether operation displays are
shown on-screen (Play, Resume, Scan and
so on.)
Digital Audio Out
Video Output
Language
Audio Language
Subtitle Language
DVD Menu Lang.
Subtitle Display
On
Off
Display
Options
When set to On, the player displays subtitles
according to the Subtitle Language setting.
Set to Off to switch subtitles off altogether.
43
En
Download from Www.Somanuals.com. All Manuals Search And Download.
07
The Initial Settings Menu
Angle Indicator
• Default setting: On
• Not all discs that you may consider
inappropriate for your children use the
Parental Lock feature. These discs will
always play without requiring the
password first.
Initial Settings
Digital Audio Out
Video Output
Language
OSD Language
On Screen Display
Angle Indicator
On
Off
• If you forget your password, you’ll need
to reset the player to it’s factory settings
(page 49), then register a new pass-
word.
Display
Options
If you prefer not to see the camera icon on-
screen during multi-angle scenes on DVD
discs, change this setting to Off.
Registering a new password
You must register a password before you can
change the Parental Lock level or enter a
Country Code.
Options
1
Select ‘Password’.
Parental Lock
Initial Settings
• Default level: Off
Digital Audio Out
Video Output
Language
Parental Lock
Password
• Default password: none
Level Change
Country Code
• Default country code: us (2119)
Display
Options
Some DVD Video discs feature a Parental
Lock level. If your player is set to a lower level
than the disc, the disc won’t play. This gives
you some control about what your children
watch on your DVD player.
2
Use the number buttons to enter a 4-
digit password.
Some discs also support the Country Code
feature. The player does not play certain
scenes on these discs, depending on the
country code you set.
Initial Settings
Digital Audio Out
Video Output
Language
Register Code Number
Before you can set the Parental Lock level or
the Country Code you must register a
password. As the password owner, you can
change the Parental Lock level or Country
Code whenever you like. You can also change
the password.
*
*
*
*
Display
Options
The numbers you enter show up as asterisks
(*) on-screen.
44
En
Download from Www.Somanuals.com. All Manuals Search And Download.
The Initial Settings Menu
07
3
Press ENTER to register the password
3
Enter a new password.
and return to the Options menu screen.
If you forget your password, you can reset
the system then register a new one. See
page 49 for how to reset the player.
Initial Settings
Password Change
Digital Audio Out
Video Output
Password
*
*
*
*
*
*
*
*
Language
Display
New Password
Options
Changing your password
To change your password, confirm your
existing password then enter a new one.
4
Press ENTER to register the new
1
Select ‘Password Change’.
password and return to the Options
menu screen.
Initial Settings
Digital Audio Out
Video Output
Language
Parental Lock
Password Change
Level Change
Setting/changing the Parental Lock
level
Country Code
Display
Options
1
Select ‘Level Change’.
Initial Settings
2
Use the number buttons to enter your
Digital Audio Out
Video Output
Language
Parental Lock
Password Change
Level Change
existing password, then press ENTER.
• The numbers appear as asterisks as you
enter them.
Country Code
Display
Options
Initial Settings
Password Change
Digital Audio Out
2
Use number buttons to enter your
Video Output
Password
password, then press ENTER.
*
*
*
*
Language
Display
New Password
Options
Initial Settings
Parental Lock : Level Change
Digital Audio Out
Video Output
Language
Display
Password
*
*
*
*
Options
1
2
3
4
5
6
7
8
off
45
En
Download from Www.Somanuals.com. All Manuals Search And Download.
07
The Initial Settings Menu
3
Select a new level.
3
Select a country code.
There are two ways you can do this.
Initial Settings
• Select by code letter: Use (cursor
up/down) to change the country code.
/
Parental Lock : Level Change
Digital Audio Out
Video Output
Language
Display
Password
*
*
*
*
Initial Settings
Options
1
2
3
4
5
6
7
8
off
Parental Lock: Country Code
Digital Audio Out
Video Output
Language
Display
Password
*
*
*
*
Country Code List
us
Code
Press (cursor left) repeatedly to lock more
levels (more discs will require the password);
press (cursor right) to unlock levels. You
can’t lock level 1.
Options
2
1
1
9
• Select by code number: Press (cursor
right) then use the number buttons to
enter the 4-digit country code (you can
find the Country code list on page 50.)
4
Press ENTER to set the new level and
return to the Options menu screen.
Setting/changing the Country Code
You may also want to refer to the Country
code list on page 50.
Initial Settings
Parental Lock: Country Code
Digital Audio Out
Video Output
Language
Display
Password
*
*
*
*
Country Code List
us
Code
1
Select ‘Country Code’.
Options
2
1
1
9
Initial Settings
Digital Audio Out
Video Output
Language
Parental Lock
Password Change
Level Change
4
Press ENTER to set the new Country
Country Code
Code and return to the Options menu
screen.
Display
Options
2
Use number buttons to enter your
• Changing the country code does not
take effect until the next disc is loaded
(or the current disc is reloaded).
password, then press ENTER.
Initial Settings
Parental Lock: Country Code
Digital Audio Out
Video Output
Language
Display
Password
*
*
*
*
Country Code List
us
Code
Options
2
1
1
9
46
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Additional Information
08
Storing discs
Taking care of your player
and discs
Although CDs and DVD discs are more
durable than vinyl records, you should still
take care to handle and store discs correctly.
When you're not using a disc, return it to its
case and store upright. Avoid leaving discs
in excessively cold, humid, or hot environ-
ments (including under direct sunlight).
Handling discs
When holding discs of any type, take care
not to leave fingerprints, dirt or scratches on
the disc surface. Hold the disc by its edge or
by the center hole and edge.
Don't glue paper or put stickers onto the
disc, or use a pencil, ball-point pen or other
sharp-tipped writing instrument. These could
all damage the disc.
Damaged or dirty discs can affect playback
performance. Take care also not to scratch
the label side of the disc. Although not as
fragile as the recorded side, scratches can
still result in a disc becoming unusable.
Should a disc become marked with finger-
prints, dust, etc., clean using a soft, dry
cloth, wiping the disc lightly from the center
to the outside edge as shown in the diagram
below.
For more detailed care information see the
instructions that come with discs.
Do not load more than one disc into the
player at a time.
Discs to avoid
Discs spin at high speed inside the player. If
you can see that a disc is cracked, chipped,
warped, or otherwise damaged, don't risk
using it in your player—you could end up
damaging the unit.
Wipe lightly from the center of the
disc using straight strokes.
Don’t wipe the disc surface using
circular strokes.
If necessary, use a cloth soaked in alcohol,
or a commercially available CD/DVD
cleaning kit to clean a disc more thoroughly.
Never use benzine, thinner or other cleaning
agents, including products designed for
cleaning vinyl records.
This unit is designed for use with conven-
tional, fully circular discs only. Use of shaped
discs is not recommended for this product.
Pioneer disclaims all liability arising in
connection with the use of shaped discs.
47
En
Download from Www.Somanuals.com. All Manuals Search And Download.
08
Additional Information
✗ Place directly on top of an amplifier, or
other component in your stereo system
that becomes hot in use.
Cleaning the pickup lens
The DVD player’s lens should not become
dirty in normal use, but if for some reason it
should malfunction due to dust or dirt,
consult your nearest Pioneer-authorized
service center. Although lens cleaners for CD
players are commercially available, we do
not recommend using them since some may
damage the lens.
✗ Use near a television or monitor as you
may experience interference—especially
if the television uses an indoor antenna.
✗ Use in a kitchen or other room where
the player may be exposed to smoke or
steam.
✗ Use on a thick rug or carpet, or cover
with cloth—this may prevent proper
cooling of the unit.
Problems with condensation
Condensation may form inside the player if it
is brought into a warm room from outside, or
if the temperature of the room rises quickly.
Although the condensation won’t damage
the player, it may temporarily impair its
performance. For this reason you should
leave it to adjust to the warmer temperature
for about an hour before switching on and
using.
✗ Place on an unstable surface, or one
that is not large enough to support all
four of the unit’s feet.
Moving the player
If you need to move the player, first press
STANDBY/ON on the front panel to turn
the player off. Wait for -OFF- to disappear
from the display, then unplug the power
cord. Never lift or move the unit during
playback—discs rotate at a high speed and
may be damaged.
Hints on installation
We want you to enjoy using this unit for
years to come, so please bear in mind the
following points when choosing a suitable
location for it:
Power cord caution
Do...
Handle the power cord by the plug part. Do
not pull out the plug by tugging the cord,
and never touch the power cord when your
hands are wet, as this could cause a short
circuit or electric shock. Do not place the
unit, a piece of furniture, or other object on
the power cord or pinch the cord in any other
way. Never make a knot in the cord or tie it
with other cords. The power cords should be
routed so that they are not likely to be
stepped on. A damaged power cord can
cause a fire or give you an electric shock.
Check the power cord once in a while. If you
find it damaged, ask your nearest Pioneer
authorized service center or your dealer for a
replacement.
✗ Use in a well-ventilated room.
✗ Place on a solid, flat, level surface, such
as a table, shelf or stereo rack.
Don’t...
✗ Use in a place exposed to high tempera-
tures or humidity, including near
radiators and other heat-generating
appliances.
✗ Place on a window sill or other place
where the player will be exposed to
direct sunlight.
✗ Use in an excessively dusty or damp
environment.
48
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Additional Information
08
Set to 4:3(Pan&Scan), widescreen discs are
shown with the left and right sides cropped.
Although the picture looks larger, you don’t
actually see the whole picture.
Screen sizes and disc formats
DVD-Video discs come in several different
screen aspect ratios, ranging from TV
programs, which are generally 4:3, to
CinemaScope widescreen movies, with an
aspect ratio of up to about 7:3.
Televisions, too, come in different aspect
ratios; ‘standard’ 4:3 and widescreen 16:9.
Widescreen TV users
If you have a widescreen TV, the TV Screen
setting (page 41) of this player should be set
to 16:9 (Wide).
Please note that many widescreen discs
override the player’s settings so that the disc
is shown in letterbox format regardless of the
setting.
When you watch discs recorded in 4:3
format, you can use the TV controls to select
how the picture is presented. Your TV may
offer various zoom and stretch options; see
the instructions that came with your TV for
details.
• Using the 16:9 (Wide) setting with a
standard 4:3 TV, or either of the 4:3
settings with a widescreen TV, will result
in a distorted picture.
Please note that some movie aspect ratios
are wider than 16:9, so even though you have
a widescreen TV, these discs will still play in
a ‘letterbox’ style with black bars at the top
and bottom of the screen.
Resetting the player
Use this procedure to reset all the player’s
settings to the factory default.
1
2
Switch the player into standby.
Standard TV users
If you have a standard TV, the TV Screen
setting (page 41) of this player should be set
to 4:3 (Letter Box) or 4:3 (Pan&Scan),
depending on which you prefer.
Using the front panel buttons, hold
down the 7 (stop) button and press
STANDBY/ON to switch the player
back on.
All the player’s settings are now reset, and
you should see the ‘Let’s Get Started’ screen.
Set to 4:3 (Letter Box), widescreen discs are
shown with black bars top and bottom.
49
En
Download from Www.Somanuals.com. All Manuals Search And Download.
08
Additional Information
Language code list
Language (Laguage code letter), Language code
Japanese (ja), 1001
English (en), 0514
French (fr), 0618
German (de), 0405
Italian (it), 0920
Spanish (es), 0519
Chinese (zh), 2608
Dutch (nl), 1412
Portuguese (pt), 1620
Swedish (sv), 1922
Russian (ru), 1821
Korean (ko), 1115
Greek (el), 0512
Bhutani (dz), 0426
Esperanto (eo), 0515
Estonian (et), 0520
Basque (eu), 0521
Persian (fa), 0601
Finnish (fi), 0609
Fiji (fj), 0610
Faroese (fo), 0615
Frisian (fy), 0625
Kirghiz (ky), 1125
Latin (la), 1201
Lingala (ln), 1214
Laothian (lo), 1215
Lithuanian (lt), 1220
Latvian (lv), 1222
Sinhalese (si), 1909
Slovak (sk), 1911
Slovenian (sl), 1912
Samoan (sm), 1913
Shona (sn), 1914
Somali (so), 1915
Albanian (sq), 1917
Serbian (sr), 1918
Siswati (ss), 1919
Sesotho (st), 1920
Sundanese (su), 1921
Swahili (sw), 1923
Tamil (ta), 2001
Malagasy (mg), 1307
Maori (mi), 1309
Macedonian (mk), 1311
Malayalam (ml), 1312
Mongolian (mn), 1314
Moldavian (mo), 1315
Marathi (mr), 1318
Malay (ms), 1319
Maltese (mt), 1320
Burmese (my), 1325
Nauru (na), 1401
Nepali (ne), 1405
Norwegian (no), 1415
Occitan (oc), 1503
Oromo (om), 1513
Oriya (or), 1518
Panjabi (pa), 1601
Polish (pl), 1612
Pashto, Pushto (ps), 1619 Twi (tw), 2023
Quechua (qu), 1721
Rhaeto-Romance (rm), 1813 Urdu (ur), 2118
Kirundi (rn), 1814
Romanian (ro), 1815
Kinyarwanda (rw), 1823
Sanskrit (sa), 1901
Sindhi (sd), 1904
Sangho (sg), 1907
Serbo-Croatian (sh), 1908 Zulu (zu), 2621
Irish (ga), 0701
Scots-Gaelic (gd), 0704
Galician (gl), 0712
Guarani (gn), 0714
Gujarati (gu), 0721
Hausa (ha), 0801
Hindi (hi), 0809
Croatian (hr), 0818
Hungarian (hu), 0821
Armenian (hy), 0825
Interlingua (ia), 0901
Interlingue (ie), 0905
Inupiak (ik), 0911
Indonesian (in), 0914
Icelandic (is), 0919
Hebrew (iw), 0923
Yiddish (ji), 1009
Javanese (jw), 1023
Georgian (ka), 1101
Kazakh (kk), 1111
Greenlandic (kl), 1112
Cambodian (km), 1113
Kannada (kn), 1114
Kashmiri (ks), 1119
Kurdish (ku), 1121
Afar (aa), 0101
Telugu (te), 2005
Tajik (tg), 2007
Thai (th), 2008
Abkhazian (ab), 0102
Afrikaans (af), 0106
Amharic (am), 0113
Arabic (ar), 0118
Assamese (as), 0119
Aymara (ay), 0125
Azerbaijani (az), 0126
Bashkir (ba), 0201
Byelorussian (be), 0205
Bulgarian (bg), 0207
Bihari (bh), 0208
Bislama (bi), 0209
Bengali (bn), 0214
Tibetan (bo), 0215
Breton (br), 0218
Catalan (ca), 0301
Corsican (co), 0315
Czech (cs), 0319
Tigrinya (ti), 2009
Turkmen (tk), 2011
Tagalog (tl), 2012
Setswana (tn), 2014
Tonga (to), 2015
Turkish (tr), 2018
Tsonga (ts), 2019
Tatar (tt), 2020
Ukrainian (uk), 2111
Uzbek (uz), 2126
Vietnamese (vi), 2209
Volapük (vo), 2215
Wolof (wo), 2315
Xhosa (xh), 2408
Yoruba (yo), 2515
Welsh (cy), 0325
Danish (da), 0401
Country code list
Country, Country code, Country code letter
Argentina, 0118, ar
Australia, 0121, au
Austria, 0120, at
Belgium, 0205, be
Brazil, 0218, br
Canada, 0301, ca
Chile, 0312, cl
China, 0314, cn
Denmark, 0411, dk
Finland, 0609, fi
France, 0618, fr
Germany, 0405, de
Hong Kong, 0811, hk
India, 0914, in
Indonesia, 0904, id
Italy, 0920, it
Japan, 1016, jp
Korea, Republic of, 1118, kr
Malaysia, 1325, my
Mexico, 1324, mx
Netherlands, 1412, nl
New Zealand, 1426, nz
Norway, 1415, no
Pakistan, 1611, pk
Philippines, 1608, ph
Portugal, 1620, pt
Russian Federation, 1821, ru
Singapore, 1907, sg
Spain, 0519, es
Sweden, 1905, se
Switzerland, 0308, ch
Taiwan, 2023, tw
Thailand, 2008, th
United Kingdom, 0702, gb
United States of America, 2119, us
50
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Additional Information
08
Selecting languages using
the language code list
Glossary
Analog audio
Some of the language options (such as ‘DVD
Language’ in the Setup Navigator) allow you
to set your prefered language from any of the
136 languages listed in the language code
list on the previous page.
An electrical signal that directly represents
sound. Compare this to digital audio which
can be an electrical signal, but is an indirect
representation of sound. See also Digital
audio.
1
2
Select ‘Other Language’.
Use the (cursor left/right)
Aspect ratio
The width of a TV screen relative to its height.
Conventional TVs are 4:3 (in other words, the
screen is almost square); widescreen models
are 16:9 (the screen is almost twice as wide
as it is high).
/
buttons to select either a code letter or a
code number.
3
Use the
/
(cursor up/down)
buttons to select a code letter or a code
number.
See the language code list on the previous
page for a complete list of langauges and
codes.
Digital audio
An indirect representation of sound by
numbers. During recording, the sound is
measured at discrete intervals (44,100 times
a second for CD audio) by an analog-to-
digital converter, generating a stream of
numbers. On playback, a digital-to-analog
converter generates an analog signal based
on these numbers. See also Sampling
frequency and Analog audio.
Dolby Digital
1
Using a maximum of 5.1 channels of audio,
this high quality surround system is used in
many of the finer movie theaters around the
world.
The on-screen display shows which channels
are active, for example showing 3/2.1. The 3
being the two front channels and the center
channel; the 2 being the surround channels,
and the .1 being the LFE channel.
51
En
Download from Www.Somanuals.com. All Manuals Search And Download.
08
Additional Information
DTS
PCM (Pulse Code Modulation)
The most common system of encoding
digital audio, found on CDs and DAT.
Excellent quality, but requires a lot of data
compared to formats such as Dolby Digital
and MPEG audio. For compatibility with
digital audio recorders (CD, MD and DAT)
and AV amplifiers with digital inputs, this
unit can convert Dolby Digital, DTS and
MPEG audio to PCM. See also Digital audio.
DTS stands for Digital Theater System. DTS
is a surround system different from Dolby
Digital that has become a popular surround
sound format for movies.
Dynamic range
The difference between the quietest and
loudest sounds possible in an audio signal
(without distorting or getting lost in noise).
Dolby Digital and DTS soundtracks are
capable of a very wide dynamic range,
delivering dramatic cinema-like effects.
PBC (PlayBack Control) (Video CD only)
A system of navigating a Video CD through
on-screen menus recorded onto the disc.
Especially good for discs that you would
normally not watch from beginning to end all
at once—karaoke discs, for example.
File extension
A tag added to the end of a filename to
indicate the type of file. For example, “.mp3”
indicates an MP3 file.
Regions (DVD-Video only)
These associate discs and players with
particular areas of the world. This unit will
only play discs that have compatible region
codes. You can find the region code of your
unit by looking on the rear panel. Some discs
are compatible with more than one region
(or all regions).
MP3
MP3 (MPEG1 audio layer 3) is a compressed
audio file format. Files are recognized by
their file extension “.mp3” or “.MP3”.
MPEG audio
An audio format used on Video CDs and
some DVD discs. This unit can convert
MPEG audio to PCM format for wider
compatibility with digital recorders and AV
amplifiers. See also PCM.
Sampling frequency
The rate at which sound is measured to be
turned into digital audio data. The higher the
rate, the better the sound quality, but the
more digital information is generated.
Standard CD audio has a sampling fre-
quency of 44.1kHz, which means 44,100
samples (measurements) per second. See
also Digital audio.
MPEG video
The video format used for Video CDs and
DVDs. Video CD uses the older MPEG-1
standard, while DVD uses the newer and
much better quality MPEG-2 standard.
52
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Additional Information
Setting the TV system
08
Watching NTSC on a PAL TV (MOD.
PAL)
Most models of the newly developed
countdown PAL TV system detect 50 Hz
(PAL)/60 Hz (NTSC) and automatically switch
vertical amplitude, resulting in a display
without vertical shrinkage.
The default setting of this player is AUTO,
and unless you notice that the picture is
distorted when playing some discs, you
should leave it set to AUTO. If you experience
picture distortion with some discs, set the TV
system to match your country or region’s
system. Doing this, however, may restrict the
kinds of disc you can watch. The table below
shows what kinds of disc are compatible
with each setting (AUTO, PAL and NTSC).
If your PAL TV does not have a V-Hold
control, you may not be able to watch NTSC
discs because of picture roll. If the TV has a
V-Hold control, adjust it until the picture
stops rolling.
1
If the player is on, press STANDBY/
On some TVs, the picture may shrink
vertically, leaving black bands at the top and
bottom of the screen. This is not a malfunc-
tion; it is caused by the NTSC to PAL
conversion.
ON to switch it to standby.
2
Using the front panel controls, hold
down ¡ ¢ then press STANDBY/ON
to switch the TV system.
The TV system changes as follows:
AUTO = NTSC
NTSC = PAL
PAL = AUTO
The player’s display shows “Welcome
Pioneer”, then indicates the new setting.
• You have to switch the player into
standby (press STANDBY/ON) before
each change.
D i s c
Type
P l a y e r s e t t i n g
Format NTSC
PAL
AUTO
DVD
NTSC
PAL
NTSC
––
MOD.PAL NTSC
PAL
PAL
Video CD
NTSC
PAL
NTSC
NTSC
NTSC
MOD.PAL NTSC
PAL
PAL
PAL
NTSC or PAL
CD / no disc ––
53
En
Download from Www.Somanuals.com. All Manuals Search And Download.
08
Additional Information
Specifications
Audio output (1 stereo pair)
Output level ....................... During audio output
200 mVrms (1 kHz, –20 dB)
Number of channels .......................................... 2
Jacks ..................................................... RCA jack
General
System ...............................................DVD player
Power requirements .... AC 220–240 V, 50/60 Hz
Power consumption .................................... 14 W
Power consumption (standby) ....................... 0.3 W
Weight ......................................................... 2.5 kg
Dimensions
Digital audio characteristics
Frequency response .....................4 Hz to 44 kHz
(DVD fs: 96 kHz)
S/N ratio .................................................... 118 dB
Dynamic range ......................................... 101 dB
Total harmonic distortion .....................0.0016 %
Wow and flutter .............. Limit of measurement
DV-454 .............. 420 (W) x 55 (H) x 278 (D) mm
DV-350 .............. 420 (W) x 55 (H) x 276 (D) mm
Operating temperature .............. +5°C to +35°C
Operating humidity ............................ 5% to 85%
(no condensation)
(
0.001% W. PEAK) or lower
S-Video output
Y (luminance) - Output level .......... 1 Vp-p (75 Ω)
C (color) - Output level ........... 286 mVp-p (75 Ω)
Jack .................................................. S-Video jack
Digital output
Optical digital output (DV-454 only)
............................................... Optical digital jack
Coaxial digital output ........................... RCA jack
Video output
Output level .................................... 1 Vp-p (75 Ω)
Jack ....................................................... RCA jack
Accessories
Audio/video cable .............................................. 1
Power cable ........................................................ 1
Remote control ................................................... 1
AA/R6P dry cell batteries .................................. 2
Operating Instructions ...................................... 1
Warranty card ..................................................... 1
AV connector output
AV Connector (21-pin connector assignment)
AV connector output ............... 21-pin connector
This connector provides the video and audio
signals for connection to a compatible colour
TV or monitor.
• The specifications and design of this
product are subject to change without
notice, due to improvement.
PIN no.
1 ................ Audio 2/R out 11 .............................G out
3 ................. Audio 1/L out 15 .....................R or C out
4 ............................... GND 17 ............................. GND
7 .............................. B out 19 ........ Video out or Y out
8 ............................. Status 21 ............................. GND
54
En
Download from Www.Somanuals.com. All Manuals Search And Download.
08
55
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Published by Pioneer Corporation.
Copyright © 2002 Pioneer Corporation.
All rights reserved.
<TPTZZ/02C0000>
Printed in China
<VRB1286-A>
Download from Www.Somanuals.com. All Manuals Search And Download.
|