Pioneer Cassette Player KEH P4025 User Manual

Multi-CD control High power cassette player with

FM/AM tuner

Operation Manual

KEH-P4025

Download from Www.Somanuals.com. All Manuals Search And Download.

Before You Start

About this manual

Precautions

This unit features a number of sophisticated

functions ensuring superior reception and oper-

ation. All the functions have been designed for

the easiest possible use, but many are not self-

explanatory. This operation manual will help you

benefit fully from this product’s potential and to

maximize your listening enjoyment.

We recommend that you familiarize yourself

with the functions and their operation by read-

ing through the manual before you begin using

this unit. It is especially important that you read

and observe precautions on this page and in

other sections.

• Keep this manual handy as a reference for

operating procedures and precautions.

• Always keep the volume low enough so you

can hear sounds outside of the car.

• Protect this product from moisture.

• If the battery is disconnected or discharged,

the preset memory will be erased and must be

reprogrammed.

• Should this product fail to operate properly,

contact your dealer or nearest authorized

Pioneer Service Station.

This manual explains head unit operation. You

can perform the same operations with the

remote control (CD-R30).

Download from Www.Somanuals.com. All Manuals Search And Download.

Before You Start

6 5/∞/2/3 buttons

What’s what

Press to do manual seek tuning, fast for-

ward, reverse and track search controls. Also

used for controlling functions.

1 VOLUME button

Press to increase or decrease the volume.

7 LOUDNESS button

2 LOCAL button (tuner)

Press to switch loudness function on or off.

Press to switch local function on or off.

PAUSE/SCAN button

8 BAND button

Press to switch pause function on or off.

Press and hold for two seconds to switch

scan function on or off.

Press to select among three FM and one AM

band and cancel the control mode of func-

tions.

3 BSM button (tuner)

9 1–6 (PRESET TUNING) buttons

Press and hold for two seconds to switch

BSM function on or off.

Press for preset tuning and disc number

search when using a multi-CD player.

REPEAT/RANDOM button

Press to switch repeat function on or off.

Press and hold for two seconds to switch

random function on or off.

0 SOURCE button

This unit is switched on by selecting a

source. Press to cycle through all of the

available sources.

4 OPEN button

Press to open the front panel.

- EQ button

Press to select various equalizer curves.

5 AUDIO button

Press to select various sound quality con-

trols.

= CLOCK button

Press to switch clock display on or off.

Download from Www.Somanuals.com. All Manuals Search And Download.

Before You Start

Optional remote control

The remote control CD-R30 is sold separately.

Operation is the same as when using the button

on the head unit. See the explanation of the

head unit about the operation of each button

with the exception of ATT, which is explained

below.

~ +/– button

Press to increase or decrease the volume.

! FUNCTION button

Not used.

@ CD button

Press once to select a CD.

# Cassette button

Press once to select a cassette.

$ TUNER button

Press once to select a tuner.

% ATT button

Press to quickly lower the volume level, by

about 90%. Press once more to return to the

original volume level.

Download from Www.Somanuals.com. All Manuals Search And Download.

Before You Start

Attaching the front panel

Protecting your unit from theft

The front panel can be detached from the head

unit and stored in the protective case provided

to discourage theft.

Replace the front panel by holding it upright

to this unit and clipping it securely into the

mounting hooks.

• Keep the front panel closed while driving.

Important

• Never use force or grip the display and the

buttons tightly when removing or attaching.

• Avoid subjecting the front panel to excessive

shocks.

• Keep the front panel out of direct sunlight and

high temperatures.

Removing the front panel

Press OPEN to open the front panel.

Grip the left side of the front panel and pull

it gently outward.

Take care not to grip it tightly or drop it.

Put the front panel into the protective case

provided for safe keeping.

Download from Www.Somanuals.com. All Manuals Search And Download.

Power ON/OFF

Turning the unit on

Notes

• In the following cases, the sound source will

not change:

Press SOURCE to turn the unit on.

When you select a source the unit is turned on.

— When a product corresponding to each

source is not connected to this unit.

— When no cassette is set in this unit.

— When no magazine is set in the multi-CD

player.

— When the AUX (external input) is set to off

(refer to page 17).

Selecting a source

You can select a source you want to listen to. To

switch to the cassette player, load a cassette

tape in this unit (refer to page 9).

• External Unit refers to a Pioneer product

(such as one available in the future) that,

although incompatible as a source, enables

control of basic functions by this product.

Only one External Unit can be controlled by

this product.

• When this unit’s blue/white lead is connected

to the car’s auto-antenna relay control termi-

nal, the car’s antenna extends when this

unit’s source is switched on. To retract the

antenna, switch the source off.

Press SOURCE to select a source.

Press SOURCE repeatedly to switch between

the following sources:

Tuner—Cassette player—Multi-CD player

—External unit—AUX

Turning the unit off

Press SOURCE and hold for at least one sec-

ond to turn the unit off.

Download from Www.Somanuals.com. All Manuals Search And Download.

Tuner

Press SOURCE to select the tuner.

Listening to the radio

Use VOLUME to adjust the sound level.

When you press VOLUME up/+, the volume is

raised and when pressed down/–, the volume is

lowered.

Press BAND to select a band.

Press BAND until the desired band is displayed,

F1, F2, F3 for FM or AM.

If you are using this unit in North, Central or

South America, reset the AM tuning step (see

Setting the AM tuning step on page 17).

To perform manual tuning, press 2 or 3

with quick presses.

The frequencies move up or down step by step.

1 BAND indicator

Shows which band the radio is tuned to, AM

or FM.

To perform seek tuning, press and hold 2

or 3 for about one second and release.

The tuner will scan the frequencies until a

broadcast strong enough for good reception is

found.

2 FREQUENCY indicator

Shows to which frequency the tuner is

tuned.

• You can cancel seek tuning by pressing either

2 or 3 with a quick press.

• If you press and hold 2 or 3 you can skip

broadcasting stations. Seek tuning starts as

soon as you release the buttons.

3 PRESET NUMBER indicator

Shows what preset has been selected.

4 STEREO () indicator

Shows that the frequency selected is being

broadcast in stereo.

Note

• When the frequency selected is being broad-

cast in stereo the STEREO () indicator will

light.

Download from Www.Somanuals.com. All Manuals Search And Download.

Tuner

Storing and recalling broadcast

frequencies

Tuning in strong signals

Local seek tuning lets you tune in only those

radio stations with sufficiently strong signals for

good reception.

If you press any of the PRESET TUNING buttons

you can easily store up to six broadcast frequen-

cies for later recall with the touch of a button.

Press LOCAL to turn local seek tuning on.

Local seek sensitivity (LOC) appears in the dis-

play.

When you find a frequency that you want to

store in memory press a PRESET TUNING but-

ton and hold until the preset number stops

flashing.

The number you have pressed will flash in the

PRESET NUMBER indicator and then remain lit.

The selected radio station frequency has been

stored in memory.

When you want to return to normal seek

tuning, press LOCAL to turn local seek tuning

off.

The next time you press the same PRESET TUN-

ING button the radio station frequency is

recalled from memory.

Storing the strongest broadcast

frequencies

BSM (best stations memory) lets you automati-

cally store the six strongest broadcast frequen-

cies under PRESET TUNING buttons 1–6 and

once stored there you can tune in to those fre-

quencies with the touch of a button.

Notes

• Up to 18 FM stations, 6 for each of the three

FM bands, and 6 AM stations can be stored in

memory.

• You can also use 5 and ∞ to recall radio sta-

tion frequencies assigned to PRESET TUNING

buttons.

Press and hold BSM for about two seconds to

turn BSM on.

BSM begins to flash. While BSM is flashing the

six strongest broadcast frequencies will be

stored under PRESET TUNING buttons in order

of their signal strength. When finished, BSM

stops flashing.

• To cancel the storage process, press BSM.

Note

• Storing broadcast frequencies with BSM may

replace broadcast frequencies you have saved

using PRESET TUNING.

Download from Www.Somanuals.com. All Manuals Search And Download.

Cassette Player

Playing a tape

Use VOLUME to adjust the sound level.

When you press VOLUME up/+, the volume is

raised and when pressed down/–, the volume is

lowered.

To perform fast forward or rewind, press 2

or 3.

FF or REW appears in the display.

• To cancel fast forward or rewind and return to

playback, press BAND.

• You can cancel fast forward or rewind by

pressing 2 or 3 in the same direction twice.

1 TAPE DIRECTION indicator

Shows the direction of the tape transport.

2 PLAY TIME indicator

To perform forward or rewind music

Shows the elapsed playing time of the cur-

rent side of the tape.

search, press 2 or 3 twice.

F-MS (forward music search) or R-MS (rewind

music search) appears in the display. The cas-

sette player will fast forward or rewind to the

next or previous blank spot on the tape and

begin to play.

• To cancel music search and return to play-

back, press BAND.

• You can cancel music search by pressing 2

or 3 in the same direction again.

Press OPEN to open the front panel.

Cassette loading slot appears.

Insert a cassette tape into the cassette

loading slot.

Playback will automatically start.

Cassette loading slot

To change the direction of the tape trans-

port, press BAND.

Notes

• Do not insert anything other than a cassette

tape into the cassette loading slot.

• PLAY TIME indicator starts from 00’00” in the

following cases:

TAPE EJECT button

• You can eject a cassette tape by pressing

TAPE EJECT.

— When a tape is inserted

Close the front panel.

— When the tape direction is changed

— When you rewind the tape to the beginning

• PLAY TIME indicator is halted when fast for-

ward, rewind or music search is operating.

• After a cassette tape has been inserted, press

SOURCE to select the Cassette player.

Download from Www.Somanuals.com. All Manuals Search And Download.

Cassette Player

Repeating play

Multi-CD Player

Playing a CD

Repeat play lets you hear the same track over

again.

Press REPEAT/RANDOM to turn repeat play

on.

RPT appears in the display. The track presently

playing will play and then repeat.

off.

Press REPEAT/RANDOM to turn repeat play

You can use this unit to control a multi-CD player,

which is sold separately.

The track presently playing will continue to play

and then play the next track.

1 TRACK NUMBER indicator

Shows the track currently playing.

2 PLAY TIME indicator

Shows the elapsed playing time of the cur-

rent track.

Skipping blank tape sections

Blank skip automatically fast forwards to the

next song if there is a long period of silence (12

seconds or longer) between songs.

3 DISC NUMBER indicator

Shows the disc currently playing.

Press 5 to turn blank skip on.

BS ON appears in the display. Long periods of

silence between songs will be skipped.

Press 5 to turn blank skip off.

BS OFF appears in the display. The complete

cassette tape will play.

Radio intercept

This function allows you to listen to the radio

during tape fast-forwarding/rewinding.

Press 6 to turn radio intercept on.

RI ON appears in the display.

Press 6 to turn radio intercept off.

RI OFF appears in the display.

Download from Www.Somanuals.com. All Manuals Search And Download.

Multi-CD Player

Press SOURCE to select the multi-CD

50-disc multi-CD player

player.

Only those functions described in this manual

are supported for 50-disc multi-CD players.

Use VOLUME to adjust the sound level.

When you press VOLUME up/+, the volume is

raised and when pressed down/–, the volume is

lowered.

Repeating play

Select a disc you want to listen to with the

There are three repeat play ranges for the multi-

CD player: Multi-CD player repeat, one-track

repeat, and disc repeat.

1 to 6 buttons.

For discs located at 1 to 6, press the correspond-

ing number button.

If you want to select a disc located at 7 to 12,

press and hold the corresponding numbers

such as 1 for disc 7, until the disc number

appears in the display.

• You can also sequentially select a disc by

pressing 5/∞.

Press REPEAT/RANDOM to select the repeat

range.

Press REPEAT/RANDOM until the desired

repeat range appears in the display.

• Nothing’s displayed — Repeat all discs in

the multi-CD player

• RPT — Repeat just the current track

• DISC — Repeat the current disc

To perform fast forward or reverse, press

and hold 2 or 3.

To skip back or forward to another track,

Notes

press 2 or 3.

• If you select other discs during repeat play,

the repeat play range changes to multi-CD

player repeat.

• If you perform track search or fast

forward/reverse during RPT (one-track

repeat), the repeat play range changes to

DISC (disc repeat).

Pressing 3 skips to the start of the next track.

Pressing 2 once skips to the start of the current

track. Pressing again will skip to the previous

track.

Notes

• When the multi-CD player performs the

preparatory operations, READY is displayed.

• If the multi-CD player does not operate prop-

erly, an error message such as ERROR-14 may

be displayed. Refer to the multi-CD player

owner’s manual.

• If there are no discs in the multi-CD player

magazine, NO DISC is displayed.

Download from Www.Somanuals.com. All Manuals Search And Download.

Multi-CD Player

When you find the desired track (or disc)

Playing tracks in a random order

press and hold PAUSE/SCAN for about two

seconds to turn scan play off.

The track (or disc) will continue to play.

Random play lets you play back tracks in a ran-

dom order within the repeat range, multi-CD

player repeat and disc repeat.

Note

Select the repeat range.

Refer to Repeating play on page 11.

• After track or disc scanning is finished, nor-

mal playback of the tracks will begin again.

Press and hold REPEAT/RANDOM for about

two seconds to turn random play on.

DRDM (random playing in a disc) or RDM (ran-

dom playing in a magazine) appears in the dis-

play. Tracks will play in a random order within

the previously selected multi-CD player repeat

or disc repeat ranges.

Pausing CD playback

Pause lets you temporarily stop playback of the

CD.

Press and hold REPEAT/RANDOM for about

two seconds to turn random play off.

Press PAUSE/SCAN to turn pause on.

Tracks will continue to play in order.

PAUSE appears in the display. Play of the cur-

rent track pauses.

Press PAUSE/SCAN to turn pause off.

Play will resume at the same point that you

turned pause on.

Scanning CDs and tracks

While you are using DISC (disc repeat), the

beginning of each track on the selected disc

plays for about 10 seconds. When you are using

multi-CD player repeat, the beginning of the first

track of each disc is played for about 10 sec-

onds.

Select the repeat range.

Refer to Repeating play on page 11.

Press and hold PAUSE/SCAN for about two

seconds to turn scan play on.

DSCN (scanning tracks) or SCAN (scanning

discs) appears in the display. The first 10 sec-

onds of each track of the present disc (or the

first track of each disc) is played.

Download from Www.Somanuals.com. All Manuals Search And Download.

Audio Adjustments

Introduction of audio

adjustments

Using balance adjustment

You can select a fader/balance setting that pro-

vides an ideal listening environment in all occu-

pied seats.

Press AUDIO to select FAD.

Press AUDIO until FAD appears in the display.

• If the balance setting has been previously

adjusted, BAL will be displayed.

1 AUDIO display

Press 5 or ∞ to adjust front/rear speaker

Shows the audio adjustments status.

balance.

Each press of 5 or ∞ moves the front/rear

speaker balance towards the front or the rear.

• FAD F15 – FAD R15 is displayed as the

front/rear speaker balance moves from front to

rear.

2 LOUD indicator

Appears in the display when loudness is

turned on.

Press AUDIO to display the audio function

names.

• FAD 0 is the proper setting when only two

speakers are used.

Press AUDIO repeatedly to switch between the

following audio functions:

Press 2 or 3 to adjust left/right speaker

FAD (balance adjustment)—EQ-L (equalizer)—

LOUD (loudness)—FIE (front image

enhancer)—SLA (source level adjustment)

• When selecting the FM tuner as the source,

you cannot switch to SLA.

balance.

When you press 2 or 3, BAL 0 is displayed.

Each press of 2 or 3 moves the left/right

speaker balance towards the left or the right.

• BAL L9 – BAL R9 is displayed as the left/right

speaker balance moves from left to right.

• To return to the display of each source, press

BAND.

Note

• If you do not operate the audio function within

about 30 seconds, the display is automatically

returned to the source display.

Download from Www.Somanuals.com. All Manuals Search And Download.

Audio Adjustments

Using the equalizer

Adjusting equalizer curves

You can adjust the currently selected equalizer

curve setting as desired. Adjusted equalizer

curve settings are memorized in CUSTOM.

The equalizer lets you adjust the equalization to

match car interior acoustic characteristics as

desired.

Press AUDIO to select the equalizer mode.

Press AUDIO until EQ-L/EQ-M/EQ-H appears in

the display.

Recalling equalizer curves

There are six stored equalizer curves which you

can easily recall at any time. Here is a list of the

equalizer curves:

Select the band you want to adjust with

the 2/3.

EQ-L (low) —EQ-M (mid) —EQ-H (high)

Display

Equalizer curve

Super bass

Powerful

Natural

Press 5 or ∞ to adjust the equalizer curve.

SPR-BASS

POWERFUL

NATURAL

VOCAL

Each press of 5 or ∞ increases or decreases

the equalizer curve respectively.

• +6 – –6 is displayed as the equalizer curve is

increased or decreased.

Vocal

• The actual range of the adjustments are differ-

ent depending on which equalizer curve is

selected.

CUSTOM

EQ FLAT

Custom

Flat

Note

• CUSTOM is an adjusted equalizer curve that

you create.

• If you make adjustments when a curve other

than CUSTOM is selected, the newly adjusted

curve will replace the previous curve. Then a

new curve with CUSTOM appears on the dis-

play while selecting the equalizer curve.

• When EQ FLAT is selected no supplement or

correction is made to the sound. This is useful

to check the effect of the equalizer curves by

switching alternatively between EQ FLAT and a

set equalizer curve.

Press EQ to select the equalizer.

• If the equalizer has been previously set to an

equalizer curve other than POWERFUL then the

title of that previously selected equalizer curve

will be displayed, such as SPR-BASS,

Adjusting loudness

Loudness compensates for deficiencies in the

low- and high-sound ranges at low volume.

NATURAL, VOCAL, CUSTOM, or EQ FLAT.

Press AUDIO to select LOUD.

Press AUDIO until LOUD appears in the display.

Download from Www.Somanuals.com. All Manuals Search And Download.

Audio Adjustments

Select LOUD on or off with 5/∞.

Adjusting source levels

SLA (Source level adjustment) lets you adjust

the volume level of each source to prevent radi-

cal changes in volume when switching between

sources.

• Settings are based on the volume level of the

FM tuner, which remains unchanged.

Select the desired level with 2/3.

LOW (low) —MID (mid) —HI (high)

Note

• You can also switch LOUD on or off by press-

ing the LOUDNESS.

Compare the FM tuner volume level with

the level of the source you wish to adjust.

Press AUDIO to select SLA.

Front image enhancer (FIE)

Press AUDIO until SLA appears in the display.

The F.I.E. (Front Image Enhancer) function is a

simple method of enhancing front imaging by

cutting mid- and high-range frequency output

from the rear speakers, limiting their output to

low-range frequencies. You can select the fre-

quency you want to cut.

Press 5 or ∞ to adjust the source volume.

Each press of 5 or ∞ increases or decreases

the source volume.

• SLA +4 – SLA –4 is displayed as the source

volume is increased or decreased.

Notes

Precaution

• Since the FM tuner volume is the control, it is

not possible to apply source level adjustments

to the FM tuner.

• The AM tuner volume level can also be

adjusted with source level adjustments.

• When the F.I.E. function is deactivated, the

rear speakers output sound of all frequencies,

not just bass sounds. Reduce the volume

before disengaging F.I.E. to prevent a sudden

increase in volume.

Press AUDIO to select FIE.

Press AUDIO until FIE appears in the display.

Select FIE on or off with 5/∞.

Select the desired frequency with 2/3.

100—160—250 (Hz)

Notes

• After switching the F.I.E. function ON, select

the Fader/Balance mode in the Audio Menu,

and adjust front and rear speaker volume

levels until they are balanced.

• Switch the F.I.E. function OFF when using a 2-

speaker system.

Download from Www.Somanuals.com. All Manuals Search And Download.

Initial Settings

Adjusting initial settings

Setting the time

This is used to set the time on the unit’s clock

display.

Press AUDIO to select the time.

Press AUDIO until the time appears in the dis-

play.

Initial settings lets you perform initial set up of

different settings for this unit.

Select the portion of the time display you

wish to set with 2/3.

Pressing 2/3 will select a portion of the clock

display:

HOUR—MINUTE

off.

Press SOURCE and hold until the unit turns

As you select portions of the clock display the

portion selected will blink.

Press AUDIO and hold until TIME appears

in the display.

Press AUDIO repeatedly to switch between the

following settings:

TIME—FM STEP—AM STEP—AUX

Use the following instructions to operate each

particular setting.

• To cancel initial settings, press BAND.

• You can also cancel initial settings by holding

down AUDIO until the unit turns off.

Select the correct time with 5/∞.

Pressing 5 will increase the selected hour or

minute. Pressing ∞ will decrease the selected

hour or minute.

Setting the FM tuning step

The tuning step employed by Seek Tuning in the

FM mode can be switched between 100 kHz

(preset at the factory) and 50 kHz.

Press AUDIO to select FM STEP.

Press AUDIO repeatedly until FM 100 appears in

the display.

Select the FM tuning step with 2/3.

Download from Www.Somanuals.com. All Manuals Search And Download.

Initial Settings

Additional Information

Setting the time display on or off

Note

• If seek tuning is performed in 50 kHz steps,

stations may be tuned in imprecisely. Tune in

the stations with manual tuning or use seek

tuning again.

You can turn the time display on even when the

sources and the demonstration are off.

Press CLOCK to select the time display.

Each press of CLOCK turns time display on or

off.

• The time display disappears temporarily when

you perform other operations, but the time indi-

cation is displayed again after 25 seconds.

Setting the AM tuning step

The AM tuning step can be switched between 9

kHz, the preset step, and 10 kHz. When using

the tuner in North, Central or South America,

reset the tuning step from 9 kHz (531 – 1,602

kHz allowable) to 10 kHz (530 – 1,640 kHz allow-

able).

Using the AUX source

An IP-BUS-RCA Interconnector such as the

CD-RB20 or CD-RB10 (sold separately) lets you

connect this unit to auxiliary equipment featur-

ing RCA output. For more details, refer to the

IP-BUS-RCA Interconnector owner‘s manual.

Press AUDIO to select AM STEP.

Press AUDIO repeatedly until AM 9 appears in

the display.

Select the AM tuning step with 2/3.

Pressing 2/3 will switch the AM tuning step

between 9 kHz and 10 kHz. The selected AM

tuning step will appear in the display.

Selecting AUX as the source

Press SOURCE to select AUX as the source.

Press SOURCE until AUX appears in the display.

• If the auxiliary setting is not switched on, AUX

cannot be selected. For more details, see

Switching the auxiliary setting on this page.

Switching the auxiliary setting

It is possible to use auxiliary equipment with

this unit. Activate the auxiliary setting when

using external equipment connected to this

unit.

Press AUDIO to select AUX.

Press AUDIO repeatedly until AUX appears in

the display.

Select AUX on or off with 5/∞.

Pressing 5/∞ will switch AUX between on and

off and that status will be displayed.

Download from Www.Somanuals.com. All Manuals Search And Download.

Additional Information

Cassette tapes

Music search and repeat

functions

• A loose, torn or warped label on a cassette

tape can jam the cassette player. Do not use

cassette tapes with loose, torn or warped

labels.

• Cassette tapes longer than C-90 (90-minute

tapes) can cause the tape to jam in the cas-

sette player. Do not use tapes longer than

C-90.

Music search and repeat functions may not

work with these tapes:

• A tape with a gap of 4 seconds or less

between songs

• A tape containing dialog or other non-musical

content, with pauses lasting 4 seconds or

longer

• Cassette tapes exposed to high temperatures

may warp and jam the cassette player. Keep

cassettes out of direct sunlight or places

where there are high temperatures.

• A tape with an extremely quiet passage in the

music lasting for 4 seconds or longer

• Store unused tapes in a tape case where there

is no danger of them becoming loose, dirty or

dusty.

Cleaning the playback head

If the head becomes dirty, the sound quality will

get bad and there will be sound dropouts and

other problems. If you have any of these prob-

lems the head may need cleaning.

Download from Www.Somanuals.com. All Manuals Search And Download.

Additional Information

Specifications

General

Cassette player

Tape ..................................... Compact cassette tape

(C-30 – C-90)

Power source ...................... 14.4 V DC (10.8 – 15.1 V

allowable)

Grounding system .............. Negative type

Max. current consumption

............................................. 10.0 A

Dimensions (W × H × D):

Tape speed .......................... 4.8 cm/sec

Fast forward/rewinding time

............................................. Approx. 100 sec (C-60)

Wow & flutter ...................... 0.09% (WRMS)

Frequency response ........... 30 – 16,000 Hz ( 3 dB)

Stereo separation ............... 45 dB

(DIN)

Chassis ................ 178 × 50 × 157 mm

Nose ..................... 188 × 58 × 20 mm

(D)

Signal-to-noise ratio ........... 61 dB (IEC-A network)

Chassis ................ 178 × 50 × 162 mm

Nose ..................... 170 × 46 × 15 mm

Weight ................................. 1.4 kg

FM tuner

Frequency range ................. 87.5 – 108.0 MHz

Usable sensitivity ............... 11 dBf (1.1 µV/75 Ω, mono,

S/N: 30 dB)

Audio

50 dB quieting sensitivity ... 17 dBf (2.2 µV/75 Ω, mono)

Signal-to-noise ratio ........... 58 dB (IEC-A network)

Distortion ............................ 0.5% (at 65 dBf, 1 kHz,

stereo)

Continuous power output is 22 W per channel min. into

4 ohms, both channels driven 50 to 15,000 Hz with no

more than 5% THD.

Maximum power output ..... 50 W × 4

Load impedance ................. 4 Ω (4 – 8 Ω allowable)

Preout max output level/output impedance

............................................. 2.2 V/1 kΩ

Equalizer (3-Band Equalizer):

(LOW) .......................... Level : 12 dB

(MID) ........................... Level : 12 dB

(HIGH) ......................... Level : 12 dB

Loudness contour

Frequency response ........... 30 – 15,000 Hz ( 3 dB)

Stereo separation ............... 24 dB (at 65 dBf, 1 kHz)

AM tuner

Frequency range ................. 531 – 1,602 kHz (9 kHz)

530 – 1,640 kHz (10 kHz)

Usable sensitivity ............... 20 µV (S/N: 20 dB)

Selectivity ............................ 50 dB ( 9 kHz)

50 dB ( 10 kHz)

(LOW) ..........................+3.5 dB (100 Hz),

+3 dB (10 kHz)

(MID) ...........................+10 dB (100 Hz),

+6.5 dB (10 kHz)

(HIGH) .........................+11 dB (100 Hz),

+11 dB (10 kHz)

Note

• Specifications and the design are subject to

possible modifications without notice due to

improvements.

(volume : –30 dB)

Download from Www.Somanuals.com. All Manuals Search And Download.

感謝惠購先鋒產品。

請通讀本使用說明書，以了解本機的正確操作方法。閱讀完畢後，請妥善保存，以備日後

參考。

開始使用之前

內置式鐳射唱機

關於本說明書 2

注意事項 2

按鈕介紹 3

播放鐳射唱片 10

50碟鐳射唱機 11

隨機播放 11

選購的遙控器 4

本機防盜措施 5

反復播放 11

掃描唱碟和曲目 12

拆卸前面板 5

暫停鐳射唱片的播放 12

安裝前面板 5

音頻調整

開關電源

打開本機 6

選擇音源 6

音頻調整介紹 13

使用平衡調整 13

使用等化器 14

調用等化器曲線 14

關閉本機 6

調整等化器曲線 14

調整響度 14

前聲像增強器（FIE) 15

調諧器

收聽收音機 7

儲存和調用廣播頻率 8

強訊號調諧 8

調整音源級 15

儲存訊號最強的廣播頻率 8

初始設置

調整初始設置 16

設置時間 16

設置FM調諧幅度 16

設置AM調諧幅度 17

卡式磁帶播放機

播放磁帶 9

反復播放 10

切換輔助設置 17

跳過磁帶的空白部分 10

廣播截聽 10

附加資訊

將時間顯示設定為打開或關閉狀態 17

使用AUX音源 17

選擇AUX作為音源 17

卡式磁帶 18

清潔播放磁頭 18

音樂搜索和反復播放功能 18

規格 19

ChH

Download from Www.Somanuals.com. All Manuals Search And Download.

開始使用之前

關於本說明書

注意事項

本機含有許多高級功能，用於保證高質量的

節目接收及機器運轉。所有功能均經專門設

計，以盡可能使本機簡便易用。但很多功能

並非一目了然，本使用說明書可幫助您充分

發揮本機的性能，從而使您在音樂欣賞方面

獲得最大享受。

請將本說明書存放在方便拿取之處，以

便參閱操作步驟和注意事項。

請勿將本機音量調得過高，以能夠聽見

車外聲響為宜。

請務必防止本機受潮。

如果電池斷路或電量放盡，則預設的記

憶內容將被刪除，需要重新設置。

如果本產品不能正常運作，請聯繫經銷

我們建議您在開始使用本機之前，先通讀一

遍本說明書，以便熟悉其功能和操作方法。

本頁及其他各章節中所述的注意事項尤為重

要，請務必閱讀並按此操作。

商或就近聯繫先鋒特約維修站。

本手冊說明的是主機的操作方法。您可以用

遙控器（CD-R30）執行相同的操作。

ChH

Download from Www.Somanuals.com. All Manuals Search And Download.

開始使用之前

5 ∞ 2 3

/ / / 按鈕

按鈕介紹

按這些按鈕可進行手動搜索調諧、快

進、快退和曲目搜索控制。這些按鈕還

用於控制功能。

VOLUME

按鈕

按該按鈕增減音量。

LOUDNESS

按鈕

LOCAL

按鈕

按該鈕可開關響度功能。

按該鈕打開或關閉本地功能。

BAND

按鈕

PAUSE/SCAN

按鈕

按該鈕可在三個FM或AM波段中進行選

擇，還可取消功能的控制模式。

按該按鈕啟動或關閉暫停功能。

按住該按鈕兩秒種啟動或關閉掃描功

能。

1-6(PRESET TURNING)

按鈕

使用多碟鐳射唱機時，按該按鈕啟動預

置調諧和唱碟號碼搜索功能。

BSM

按鈕

按住該鈕兩秒，打開或關閉BSM功能。

SOURCE

按鈕

PEPREAT/RANDOM

按鈕

通過選擇某一音源的方式打開本機。按

該鈕可輪流切換現有的音源。

按該按鈕啟動或關閉反復播放功能。

按住該按鈕兩秒種啟動或關閉隨機播放

功能。

按鈕

OPEN

按該鈕可選擇不同的等化器曲線。

按鈕

CLOCK

按該鈕打開前面板。

按鈕

AUDIO

按鈕

按該鈕可開關時鐘顯示。

按該鈕可選擇不同的音質控制方式。

ChH

Download from Www.Somanuals.com. All Manuals Search And Download.

開始使用之前

選購的遙控器

遙控器CD-R30為選購配件。操作方法與主機

上的按鈕相同。請參閱主機介紹，查詢除

ATT

ATT外各按鈕的操作方法，其中

文作一介紹。

將在下

+/-按鈕

增加或降低音量。

FUNCTION

按鈕

不使用。

按鈕

按一下，選擇一張CD。

Cassette

按鈕

按一下，選擇卡式磁帶。

TUNER

按鈕

按一下，選擇調諧器。

ATT

按鈕

按動該鈕，可快速降低音量級約90％。

再按一次，可返回至原來的音量級。

ChH

Download from Www.Somanuals.com. All Manuals Search And Download.

開始使用之前

安裝前面板

本機防盜措施

前面板可從主機上拆下並存放於護套中，以

防本機失竊。

若要更換前面板，請將其豎直得握至主機，

並將其牢固得卡在安裝倒鉤中。

開車時，請將前面板闔上。

重要

拆卸和安裝本機時，請勿用力夾持顯示

屏和按鈕或對它們施以強力。

請勿使前面板遭受過度的震動。

請勿將前面板暴露於直射陽光或高溫

下。

拆卸前面板

OPEN

打開前面板。

按

握住前面板的左端，將其輕輕向外拉。

請小心不要猛烈拉扯或使其跌落。

將前面板放入護套中妥善保存。

ChH

Download from Www.Somanuals.com. All Manuals Search And Download.

開關電源

打開本機

注意

在下列情況下，音源不會改變：

－當與各音源相應的設備沒有與本機連

接時。

SOURCE

按

打開本機。

當您選擇某一音源時，本機打開。

－機內無卡式磁帶時。

－多碟鐳射唱機未安裝唱碟匣時

－AUX（外部輸入）設置為關閉時（請參

閱第17頁）

外接裝置指的是，並不能作為本機的兼

容音源，但可由本機控制其基本功能的

先鋒產品（如以後推出的產品）。本機

祇能控制一臺外接裝置。

選擇音源

您可以選擇需收聽的音源。若要轉換至卡式

磁帶播放機，則將卡式磁帶裝入機內（請參

見第9頁）。

如果本機的藍/白引線已經與汽車的自

動天線繼電器控制端子相連，則當本機

的音源打開時，汽車的天線將伸出。若

要收回天線，則關閉音源。

SOURCE

按

選擇音源。

SOURCE

反復按

換：

可在下列音源之間進行轉

調諧器－卡式磁帶播放機－多碟鐳射唱機－

外接裝置－AUX

關閉本機

SOURCE

按住

一秒鐘以上可關閉本機。

ChH

Download from Www.Somanuals.com. All Manuals Search And Download.

調諧器

SOURCE

VOLUME

按

用

選擇調諧器。

收聽收音機

按鈕調整音量。

VOLUME

當您按

增/+時，音量昇高；當您

VOLUME

按

減/-時，音量降低。

BAND

選擇波段。

按

如果在北美洲、中美洲或南美洲使用調諧

器，請將AM調諧幅度從9 kHz（出廠預設

幅度）設置為10 kHz。（請參見第17頁）

BAND

直到顯示所需的波段：FM的、

按

F2 F3 AM

、或

。

2 3

若要進行手動調諧，請快速按或。

BAND

（波段）指示燈

頻率逐步調高或調低。

顯示收音機的調諧波段是AM還是FM。

FREQUENCY

（頻率）指示燈

2 3

若要進行搜索調諧，請按住或約一

顯示調諧器的調諧頻率。

秒鐘，然後放開。

PRESET NUMBER

（預設號碼）指示

調諧器將掃描頻率，直到發現訊號足夠強且

接收情況良好的電台。

燈

顯示所選擇的預設電台號碼。

2 3

您可以通過快速按或來取消搜索調

STEREO

（立體聲）（）指示燈

諧。

表明所選擇的頻率是以立體聲模式進行

廣播。

如果您按住或，則可跳過正在廣播

的電台。當您放開按鈕時，搜索調諧立即啟

動。

注意

如果所選頻率以立體聲模式廣播，則

STEREO

（立體聲）（）指示燈亮起。

ChH

Download from Www.Somanuals.com. All Manuals Search And Download.

調諧器

儲存和調用廣播頻率

PRESET TUNING

強訊號調諧

通過按任一

按鈕，您可以

本地搜索調諧功能祇能調諧訊號足夠強且接

收情況良好的無線電台。

輕松地儲存多至六個的廣播頻率，以後祇需

按一次按鈕便可將其調出。

LOCAL

按

啟動本地搜索調諧功能。

LOC

）。

當您找到需要儲存在記憶體中的頻率時，則

顯示屏上出現本地搜索靈敏標誌（

PRESET TUNING

按住

按鈕直到預設號碼停

LOCAL

止閃爍。

若要返回正常搜索調諧，則按

關

PRESET NUMBER

（預設

您所按的號碼將在

閉本地搜索調諧功能。

號碼）指示燈閃爍，然後保持點亮。此時，

所選擇的無線電台頻率已儲存在記憶體中。

儲存訊號最強的廣播頻率

PRESET TUNING

當您下一次按同一個

按鈕

BSM（最佳電台記憶）可讓您將訊號最強的

PRESET TUNING

時，該無線電台頻率將從記憶體中調出。

六個廣播頻率自動與

按鈕

對應儲存。儲存之後，您祇需按一次按

鈕便可將其調出。

1-6

注意

記憶體中最多可儲存18個FM電台（三個

BSM

按住

約兩秒鐘，啟動

。

FM波段各6個電台）和6個AM電台。

BSM

開始閃爍。當

閃爍時，訊號最強

5 ∞

您還可以用和調出已分配到

PRE-

PRESET TUNING

的六個廣播頻率將與

對應儲存，儲存時以訊號由強到弱為序。完

BSM

按鈕

SET TUNING

按鈕的無線電台頻率。

成後，

停止閃爍。

BSM

若要取消儲存模式，請按

。

注意

利用BSM儲存的訊號最強的廣播頻率可

PRESET TUNING

能會把您通過

頻率替換掉。

儲存的廣播

ChH

Download from Www.Somanuals.com. All Manuals Search And Download.

卡式磁帶播放機

VOLUME

用

調整音量。

播放磁帶

VOLUME

當您按

增/+時，音量昇高；當您

減/-時，音量降低。

VOLUME

按

2 3

若要進行快進或快退，則按住或。

FF REW

或

出現在顯示器中。

TAPE DIRECTION

指示燈

若要取消快進或倒帶，恢復播放，則按

顯示磁帶的走帶方向。

BAND

。

PLAY TIME

（播放時間）指示燈

2 3

您可以按同一個或兩次以取消快進

顯示當前曲目的已播放時間。

或倒帶。

OPEN

按

，打開前面板。

要執行正向或反向音樂搜索，按或

兩次。

F-MS

卡式磁帶裝載槽出現。

R-MS

（正向音樂搜索）或

（反向音樂

將卡式磁帶插入磁帶裝載槽。

搜索）出現在顯示器中。卡式磁帶播放機將

快進或倒帶至磁帶中下一個或上一個空白區

域並開始播放。

播放將自動開始。

卡式磁帶裝載槽

若要取消音樂搜索，恢復播放，則按

BAND

。

2 3

您可以按同一個或兩次以取消快進

或倒帶。

BAND

要改變磁帶的走帶方向，按

注意

。

TAPE EJECT

按鈕

CD EJECT

，退出鐳射唱片。

您可以按動

請勿將除卡式磁帶以外的物體插入磁帶裝

載槽。

闔上前面板。

PLAY TIME

在下列情況下，

00'00''

指示燈從

開始計數。

－當磁帶插入時

－當磁帶方向改變時

－當您將磁帶倒至開始處時

SOURCE

選擇卡式

卡式磁帶插入後，按

磁帶播放機。

當快進、倒帶或音樂搜索正在執行時，

PLAY TIME

指示燈停止工作。

ChH

Download from Www.Somanuals.com. All Manuals Search And Download.

卡式磁帶播放機

多碟鐳射唱機

反復播放

播放鐳射唱片

您可以利用反復播放功能反復欣賞同一曲

目。

REPEAT/RANDOM

按

，啟動反復播放功

能。

RPT

您可以用本機控制一臺另購的多碟鐳射唱

機。

顯示屏上出現

將被反復播放。

。當前正在播放的曲目

REPEAT/RANDOM

1TRACK NUMBER

指示燈

按

，關閉反復播放功

能。

顯示當前播放的曲目。

當前正在播放的曲目將繼續播放，然後播放

下一曲目。

PLAY TIME

指示燈

顯示當前曲目的已播放時間。

DISC NUMBER

指示燈

跳過磁帶的空白部分

顯示當前播放的唱碟。

如果在兩首曲子之間有較長一段無聲部分

（不少於12秒），則空白跳躍功能將自動使

磁帶快進至下一首曲子。

按5啟動空白跳躍功能。

BS ON 出現在顯示器中。曲子之間較長的無

聲部分將被跳過。

按5關閉空白跳躍功能。

BS OFF 出現在顯示器中。卡式磁帶將被完

整播放。

廣播截聽

該功能允許您在磁帶快進/倒帶時收聽廣播

節目。

按6啟動廣播截聽功能。

RI ON

出現在顯示器中。

按6關閉廣播截聽功能。

RI OFF

出現在顯示器中。

ChH 10

Download from Www.Somanuals.com. All Manuals Search And Download.

多碟鐳射唱機

SOURCE

VOLUME

按

用

選擇多碟鐳射唱機。

調節音量。

50碟鐳射唱機

50碟鐳射唱機僅支持本手冊中介紹的功能。

VOLUME

增/+時，音量昇高；當您按

減/-時，音量降低。

當您按

VOLUME

反復播放

多碟鐳射唱機共有三種反復播放範圍：多碟

鐳射唱機反復播放、單曲反復播放和唱碟反

復播放。

用1至6按鈕選擇您要欣賞的唱碟。

對於位於1至6位置的唱碟，請按相應的數字

按鈕。

如果您要選擇位於7至12位置的唱碟，則按

REPEAT/RANDOM

按

選擇反復播放範圍。

住相應的數字按鈕（如對應唱碟7），直至

按

直至所需的反復播放範

唱碟號碼出現在顯示器中。

圍出現在顯示器中。

5 ∞

您也可以用 / 按順序選擇唱碟。

無內容顯示－反復播放多碟鐳射唱機中的

所有唱碟

2 3

若要執行快進或快倒，則按住或。

÷ RPT

－僅反復播放當前曲目

÷ DISC

－反復播放當前唱碟

若要跳至上一首或下一首曲目，則按或

。

按跳至下一首曲目的開始處，按一次跳

至當前曲目的開始處。再按一次將跳至上一

首曲目。

注意

如果您在反復播放的過程中選擇了其他唱

碟，則反復播放範圍將改變為多碟鐳射唱

機反復播放。

RPT

（單曲反復播放）過程中執行

如果在

注意

了曲目搜索或快進/快倒操作，則反復播

DISC

當多碟鐳射唱機執行準備性操作時，

放範圍改變為

（唱碟反復播放）。

READY

將顯示出來。

ERROR-

如果多碟鐳射唱機運作不正常，則

之類的錯誤訊息將顯示出來。請參閱多

碟鐳射唱機的使用說明書。

如果多碟鐳射唱機的唱碟匣中沒有唱碟，

NO DISC

則顯示

。

11 ChH

Download from Www.Somanuals.com. All Manuals Search And Download.

多碟鐳射唱機

當您找到所需的曲目（或唱碟）時，按住

以隨機順序播放曲目

PAUSE/SCAN

約兩秒種關閉掃描功能。

隨機播放功能可讓您在反復播放、多碟鐳射

唱機反復播放和唱碟反復播放的範圍內，以

隨機順序播放曲目。

曲目（或唱碟）將繼續播放。

注意

選擇反復播放範圍。

完成曲目或唱碟掃描後，正常的曲目播放

請參閱第11頁反復播放。

將繼續進行。

REPEAT/RANDOM

約兩秒種啟動隨

按住

機播放。

DRDM

暫停唱碟的播放

暫停功能可讓您暫時停止唱碟的播放。

RDM

（唱碟匣

（唱碟隨機播放）或

隨機播放）出現在顯示器中。本機將在前面

選擇的多碟鐳射唱機反復播放或唱碟反復播

放的範圍內，以隨機順序播放曲目。

PAUSE/SCAN

啟動暫停功能。

按

PAUSE

出現在顯示器中。本機暫停當前播放

的曲目。

REPEAT/RANDOM

約兩秒種關閉隨

按住

PAUSE/SCAN

按

關閉暫停功能。

機播放。

播放將從暫停點起繼續進行。

曲目將按順序繼續播放。

掃描唱碟和曲目

DSC

當您正在使用

（唱碟反復播放）時，

本機將播放所選唱碟各曲目開始部分約10

秒種的內容。當您正在使用多碟鐳射唱機反

復播放時，本機將播放各唱碟第一首曲目開

始部分約10秒種的內容。

選擇反復播放範圍。

請參閱第11頁反復播放。

PAUSE/SCAN

SCAN

約兩秒種選擇。

按住

DSCN

SCAN

（掃描唱碟）

（掃描曲目）或

出現在顯示器中。本機將播放當前唱碟各曲

目（或各唱碟第一首曲目）的前10秒種內

容。

ChH 12

Download from Www.Somanuals.com. All Manuals Search And Download.

音頻調整

音頻調整介紹

使用平衡調整

您可以選擇衰減/平衡設置，從而為全部座

位上的欣賞者都創造出理想的聽音環境。

AUDIO

FAD

按

選擇

直到顯示屏顯示

如果此前已調整過平衡設置，則顯示

。

AUDIO

FADER

按

。

音頻顯示

BAL

。

顯示音頻調整的狀態。

LOUD

（響度）指示燈

5 ∞

按或調整前/後揚聲器的平衡。

打開響度功能時將顯示在顯示屏上。

5 ∞

按或可使前/後揚聲器平衡向前或向

後移動。

AUDIO

按

顯示音頻功能的名稱。

當前/後揚聲器平衡由前向後移動時，

AUDIO

反復按

轉換：

可在下列音頻功能之間進行

FAD F15

FAD R15

顯示屏顯示

－

。

如果僅使用兩隻揚聲器，正確的設置應

FAD0

FAD

（衰減器）

EQ-L

（等化器）

LOUD

SLA

為

。

FIE

（前聲像增強器）

（響度）

級調整）

（音源

2 3

按或調整左/右揚聲器的平衡。

當您選擇FM調諧器作為音源時，則不能

BAL 0

當您按或時，顯示屏顯示

。按

或可使左/右揚聲器平衡向左或向右

移動。

SLA

轉換至

。

BAND

若要返回各音源的顯示屏，請按

。

當左/右揚聲器平衡由左向右移動時，

BAL L9 – BAL R9

顯示屏顯示

。

注意

如果您在30秒鐘之內沒有操作音頻功

能，則顯示屏自動返回音源顯示。

13 ChH

Download from Www.Somanuals.com. All Manuals Search And Download.

音頻調整

使用等化器

調整等化器曲線

您可以利用等化器來調整等化，以使車內聲

音特性符合您的要求。

您可以根據需要調整當前選擇的等化器曲線

設置。調整後的等化器曲線設置將儲存為

CUSTOM

。

調用等化器曲線

AUDIO

按

選擇等化器模式。

EQ-L/EQ-M/EQ-

直到顯示屏顯示

您可以隨時方便地調用本機儲存的六種等化

器曲線。下面是等化器曲線表。

AUDIO

按

。

顯示

等化器曲線

用

選擇您要調整的波段。

EQ-M EQ-H

SPR-BASS

POWERFUL

NATURAL

VOCAL

超低音

強勁

EQ-L

（低）

（中）（高）

自然

5 ∞

按或調整等化器曲線。

唱聲

5 ∞

按或可分別增加或減少等化器曲線。

CUSTOM

EQ FLAT

定製

當等化器曲線增加或減少時，顯示屏顯

無效果

+6 – -6

示

。

實際的調整範圍因所選的等化器曲線而

異。

CUSTOM

是一種由您建立的經調整的等

時，本機不對聲音進行

化器曲線。

EQ FLAT

當選擇

補充或修正。該功能在檢查等化器曲線的效

EQ FLAT

注意

果時十分有用，通過來回切換

和其

CUSTOM

以外的其他曲線的

如果在選擇

他等化器曲線的方式對該等化器曲線的效果

進行檢查。

情況下進行調整，則最新調整的曲線將

替換-先前的曲線。此後選擇等化器曲

CUSTOM

線時，新的曲線將與

示屏中顯示。

一起在顯

按

選擇等化器。

如果此前已將等化器設置為

以外的等化器曲線，則將顯示此前選擇的等

POWERFUL

調整響度

SPR -BASS

化器曲線的標題，如

、

或

NATURAL VOCAL CUSTOM

、

響度調整可在低音量時對低音和高音範圍內

的不足進行補償。

FLAT

。

AUDIO

LOUD

按

選擇

。

AUDIO

LOUD

按

直到顯示屏顯示

。

ChH 14

Download from Www.Somanuals.com. All Manuals Search And Download.

音頻調整

用 /

LOUD

啟動或關閉。

注意

啟動F.I.E.功能後，請在音頻選單中選

擇衰減/平衡模式，然後調整前後揚聲

器音量使它們達到平衡。

用選擇所需的音量。

M ID

LOW

（低）

（高）

（中）

如果使用雙揚聲器系統，則請關閉F.I.

E.功能。

注意

LOUDNESS

啟動或關閉

您也可以通過按

LOUD

調整音源級

。

您可以利用SLA（音源級調整）功能調整各

音源的音量級，以防止在音源之間進行轉換

時音量發生突然的變化。

FIE

前聲像增強器（）

F.I.E.（前聲像增強器）功能是一種簡單的

增強前方聲像的方法：削減後置揚聲器的中

高頻輸出並將輸出限制於低頻範圍。您可以

選擇需削減的頻率。

FM調諧器的音量級通常保持不變，此項

設置即是以FM調諧器的音量級為基準。

將

調諧器的音量級與您需要調整的音

源的音量級相比較。

注意事項

AUDIO

SLA

按

選擇

。

當關閉F.I.E.功能時，後置揚聲器將輸

AUDIO

SLA

按

直到顯示屏顯示

。

出全部頻率的聲音，而不僅是低音。在關閉

F.I.E.之前請減小音量，以防音量突然增

大。

5 ∞

按或調整音源音量。

5 ∞

按或增大或降低音源音量。

AUDIO

FIE

按

選擇

。

AUDIO

FIE

當音源音量增大或降低時，顯示屏顯示

按

直到顯示屏顯示

。

SLA+4 –SLA-4

。

5 ∞

用 / 啟動或關閉

FIE

。

注意

2 3

用 / 選擇所需的頻率。

由於FM調諧器音量是控制基準，因此無

法將音源級調整功能用於FM調諧器。

AM調諧器的音量級也可通過音源級調整

功能進行調整。

100 160 250(Hz)

15 ChH

Download from Www.Somanuals.com. All Manuals Search And Download.

初始設置

調整初始設置

設置時間

該功能用於設置本機時鐘顯示屏上的時間。

AUDIO

選擇時間。

按

AUDIO

按

直到顯示屏顯示時間。

您可以利用初始設置功能對本機的多種設

置進行初始化設定。

2 3

用 / 選擇需要設置的時間顯示部

份。

2 3

按 / 可選擇時鐘顯示部份：

SOURCE

直到本機關閉。

按住

HOUR MINUTE

當您選定時鐘顯示部分時，所選的部份將會

閃爍。

AUDIO

TIME

直到顯示屏顯示

可在下列設置之間轉換：

FM STEP AM STEP AUX

。

反復按

TIME

根據下列說明操進行各種設置。

BAND

若要取消初始設置，則按

AUDIO

。

您還可以按住

直到本機關閉，以

此來取消初始設置。

5 ∞

用 / 選擇正確的時間。

5 ∞

按可增大所選的小時或分鐘。按可減

小所選的小時或分鐘。

設置調諧幅度

FM模式下的搜索調諧所採用的調諧幅度可

在100 kHz（出廠預設值）和50 kHz之間轉

換。

AUDIO

STEP

按

選擇

。

AUDIO

FM100

反復按

直到顯示屏顯示

。

用 / 選擇調諧幅度。

ChH 16

Download from Www.Somanuals.com. All Manuals Search And Download.

附加資訊

初始設置

將時間顯示設定為打開或關閉狀態

即使當音源處於關閉狀態，您也可以打開時

間顯示。

注意

如果以50 kHz幅度執行搜索調諧，則搜

索出來的某些電台可能會不太精確。請手

動調諧這些電台或再進行一次搜索調諧。

CLOCK

按

，選擇時間顯示。

CLOCK

每按一下

閉。

，時間顯示即會打開或關

設置調諧幅度

AM調諧幅度可在9 kHz（預設幅度）和10

kHz之間轉換。如果在北美洲、中美洲或南

美洲使用調諧器，則請將調諧幅度從9 kHz

（允許範圍531 - 1,602 kHz）重設為10 kHz

（允許範圍530 - 1,640 kHz）。

當您執行其他操作時，時間顯示會暫時

消失。但25秒後時間顯示會再次出現。

AUX

使用

音源

您可以用CD-RB20或CD-RB10之類的IP-

BUS-RCA接線（另售）將本機與配備RCA輸

出端的輔助設備連接起來。詳情請參閱IP-

BUS-RCA接線的使用說明書。

AUDIO

AM STEP

選擇

按

。

AUDIO

AM9

反復按

直到顯示屏顯示

。

2 3

用 / 選擇

調諧幅度。

按 / 可使AM調諧幅度在9 kHz和10

kHz之間轉換。所選的AM調諧幅度將顯示

在顯示屏上。

AUX

選擇

作為音源

SOURCE

AUX

按

選擇

作為音源。

直至

出現在顯示器中。

切換輔助設置

如果輔助設置沒有打開，則不能選擇

您可以將輔助設備與本機配合使用。當您

使用與本機相連的外部設備時，請執行輔

助設置。

AUX

。詳情請參閱本頁的切換輔助設置。

AUDIO

AUX

按

選擇

。

AUDIO

AUX

反復按

直至

出現在顯示器中。

5 ∞

用 / 打開或關閉

AUX

。

5 ∞

按 / 可切換AUX的打開和關閉，當前狀

態將顯示。

17 ChH

Download from Www.Somanuals.com. All Manuals Search And Download.

附加資訊

音樂搜索和反復播放功能

音樂搜索和反復播放功能可能不適用於下列

磁帶：

卡式磁帶

卡式磁帶上的標籤若有鬆動、撕裂或捲曲

現象，可能會使卡式磁帶播放機發生夾

帶。請勿使用具有鬆弛、撕裂或捲曲標籤

的卡式磁帶。

曲子之間的間隔時間不超過4秒的磁帶。

含有對話等非音樂內容，並且其中的暫停

時間不少於4秒的磁帶。

長度大於C-90（90分鐘磁帶）的卡式磁帶

可能會引起播放機夾帶現象。請勿使用長

度大於C-90的磁帶。

所含音樂中有不少於4秒的靜默片斷的磁

帶。

卡式磁帶受高溫影響會發生翹曲，並導致

播放機夾帶。請勿將卡式磁帶放置於直射

陽光或高溫處。

將未用過的磁帶置於磁帶盒內，以免磁帶

鬆弛、變髒或沾染灰塵。

清潔播放磁頭

如果磁頭變髒，音質就會變差，產生聲音失

落等問題。如果發生此類問題，則表明可能

需要清潔磁頭。

ChH 18

Download from Www.Somanuals.com. All Manuals Search And Download.

附加資訊

規格

一般

卡式磁帶播放機

磁帶 ............. 小型卡式磁帶（C-30

................. －C-90）

走帶速度 ......... 4.8 cm/sec

快進/倒帶時間.... 約100 sec（C-60）

抖晃度 ........... 0.09%（WRMS）

電源 ............. 14.4VDC(容訏範圍

................. 10.8 15.1V)

接地系統 ......... 負極型

最大電流消耗 ..... 10.0A

尺寸（寬×高×深）

（DIN）

頻率響應 .......... 30-16,000Hz（ 3dB）

立體聲分離度 ..... 45dB

信噪比 ........... 61dB（IEC-A網路）

機身...... 178×50×157毫米

前端部分.. 188×58×20毫米

（D）

機身...... 178×50×162毫米

前端部分.. 170×46×15毫米

重量 ............. 1.4公斤

FM調諧器

頻率範圍 ......... 87.5

有效靈敏度 ....... 11dBf(1.1 V/75

................. 聲道 S/N：30 dB）

108.0MHz

Ω_，

單

，

音頻

Ω_，

50dB靜噪靈敏度 ... 17dBf(2.2 V/75

單聲道）

信噪比 ........... 58dB(IEC-A網絡)

失真 ............. 0.5%(65dBf

體聲）

各聲道連續輸出功率為22瓦

聲道範圍50至15,000Hz

最大輸出功率 ..... 50W×4

，

最小負荷4歐

姆

，

，儘5％THD。

，

1kHz，立

Ω

8 )

負載阻抗 ......... 4 (容訏範圍4

前輸出最大輸出電平/輸出阻抗

頻率響應 ......... 30 15,000Hz( 3dB）

Ω

................. 2.2V/1k

等化器(3波段等化器)：

立體聲分離度 ..... 24dB(65dBf 1kHz)

，

（低頻）........ 等級： 12dB

（中頻）........ 等級： 12dB

AM調諧器

頻率範圍 ......... 531

530

1,602kHz(9kHz）

1,640kHz(10kHz)

（高頻）........ 等級： 12dB

響度等高線

（低頻）........ +3.5dB(100Hz)

+3dB(10kHz)

（中頻）........ +10dB(100Hz)

+6.5dB(10kHz)

有效靈敏度 ....... 20 V(S/N：20dB)

選擇度 ........... 50dB( 9kHz)

................. 50dB( 10kHz)

（高頻）........ +11dB(100Hz)

+11dB(10kHz)

（音量：-30dB）

注意

規格和設計若因改進有所變更，恕不另行

通知。

19 ChH

Download from Www.Somanuals.com. All Manuals Search And Download.

PIONEER CORPORATION

4-1, MEGURO 1-CHOME, MEGURO-KU, TOKYO 153-8654, JAPAN

PIONEER ELECTRONICS (USA) INC.

P.O. Box 1760, Long Beach, California 90801, U.S.A.

TEL: (800) 421-1404

PIONEER EUROPE NV

Haven 1087, Keetberglaan 1, B-9120 Melsele, Belgium

TEL: (0) 3/570.05.11

PIONEER ELECTRONICS AUSTRALIA PTY. LTD.

178-184 Boundary Road, Braeside, Victoria 3195, Australia

TEL: (03) 9586-6300

PIONEER ELECTRONICS OF CANADA, INC.

300 Allstate Parkway, Markham, Ontario L3R OP2, Canada

TEL: (905) 479-4411

PIONEER ELECTRONICS DE MEXICO, S.A. de C.V.

San Lorenzo 1009 3er. Piso Desp. 302

Col. Del Valle Mexico, D.F. C.P. 03100

TEL: 5-688-52-90

Published by Pioneer Corporation.

Publication de Pioneer Corporation.

Tous droits de reproduction et de traduction

réservés.

Printed in Malaysia

Imprimé en Malaisie

<CZR2946-B/JS> ES

Download from Www.Somanuals.com. All Manuals Search And Download.

PDP Video Gaming Accessories PL 7581 User Manual
Pelco Security Camera C2465M ML User Manual
Philips Camera Accessories LR20PS12A User Manual
Pioneer Stereo Amplifier PRS D200 User Manual
Planet Technology Network Card PL 501v2 EU User Manual
Polk Audio Speaker EX SERIES II User Manual
Polycom Network Card VIU 4350 User Manual
Poulan Snow Blower 199600 User Manual
ProForm Home Gym 831285820 User Manual
ProForm Home Gym 831286450 User Manual