Pioneer Car Video System AVH P6600DVD User Manual

Operation Manual  
AV Receiver/DVD Player with 6.5 inch Wide Display  
AVH-P6600DVD  
English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Contents  
3
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Contents  
4
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Selecting fine audio equipment such as the unit you’ve just purchased is only the start of your  
musical enjoyment. Now it’s time to consider how you can maximize the fun and excitement your  
equipment offers. This manufacturer and the Electronic Industries Association’s Consumer  
Electronics Group want you to get the most out of your equipment by playing it at a safe level. One  
that lets the sound come through loud and clear without annoying blaring or distortion—and, most  
importantly, without affecting your sensitive hearing.  
Sound can be deceiving. Over time your hearing “comfort level” adapts to higher volumes of  
sound. So what sounds “normal” can actually be loud and harmful to your hearing. Guard against  
this by setting your equipment at a safe level BEFORE your hearing adapts.  
To establish a safe level:  
Start your volume control at a low setting.  
Slowly increase the sound until you can hear it comfortably and clearly, and without distortion.  
Once you have established a comfortable sound level:  
Set the dial and leave it there.  
Taking a minute to do this now will help to prevent hearing damage or loss in the future. After  
all, we want you listening for a lifetime.  
We Want You Listening For A Lifetime  
Used wisely, your new sound equipment will provide a lifetime of fun and enjoyment. Since  
hearing damage from loud noise is often undetectable until it is too late, this manufacturer and the  
Electronic Industries Association’s Consumer Electronics Group recommend you avoid prolonged  
exposure to excessive noise. This list of sound levels is included for your protection.  
Decibel  
Level  
Example  
30  
40  
50  
60  
70  
80  
Quiet library, soft whispers  
Living room, refrigerator, bedroom away from traffic  
Light traffic, normal conversation, quiet office  
Air conditioner at 20 feet, sewing machine  
Vacuum cleaner, hair dryer, noisy restaurant  
Average city traffic, garbage disposals, alarm clock at two feet  
THE FOLLOWING NOISES CAN BE DANGEROUS UNDER CONSTANT EXPOSURE  
90  
100  
120  
140  
180  
Subway, motorcycle, truck traffic, lawn mower  
Garbage truck, chain saw, pneumatic drill  
Rock band concert in front of speakers, thunderclap  
Gunshot blast, jet plane  
Rocket launching pad  
Information courtesy of the Deafness Research Foundation.  
6
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Section  
Precautions  
01  
IMPORTANT SAFEGUARDS  
To ensure safe driving  
Please read all of these instructions regarding  
your display and retain them for future refer-  
ence.  
WARNING  
!
LIGHT GREEN LEAD AT POWER CON-  
NECTOR IS DESIGNED TO DETECT  
PARKED STATUS AND MUST BE CON-  
NECTED TO THE POWER SUPPLY SIDE  
OF THE PARKING BRAKE SWITCH. IM-  
PROPER CONNECTION OR USE OF  
THIS LEAD MAY VIOLATE APPLICABLE  
LAW AND MAY RESULT IN SERIOUS IN-  
JURY OR DAMAGE.  
1
Read this manual fully and carefully before  
operating your display.  
2
Keep this manual handy as a reference for  
operating procedures and safety informa-  
tion.  
3
4
5
Pay close attention to all warnings in this  
manual and follow the instructions care-  
fully.  
Do not allow other persons to use this sys-  
tem until they have read and understood  
the operating instructions.  
Do not install the display where it may (i)  
obstruct the drivers vision, (ii) impair the  
performance of any of the vehicles operat-  
ing systems or safety features, including  
air bags, hazard lamp buttons or (iii) impair  
the drivers ability to safely operate the ve-  
hicle.  
!
!
To avoid the risk of accident and the potential  
violation of applicable laws, the front DVD or  
TV (sold separately) feature should never be  
used while the vehicle is being driven. Also,  
rear displays should not be in a location  
where it is a visible distraction to the driver.  
In some countries or states the viewing of  
images on a display inside a vehicle even by  
persons other than the driver may be illegal.  
Where such regulations apply, they must be  
obeyed and this units DVD features should  
not be used.  
6
7
As with any accessory in your vehicles in-  
terior, the display should not divert your  
attention from the safe operation of your  
vehicle. If you experience difficulty in oper-  
ating the system or reading the display,  
please park safely before making adjust-  
ments.  
Do not attempt to install or service your  
display by yourself. Installation or servi-  
cing of the display by persons without  
training and experience in electronic  
equipment and automotive accessories  
may be dangerous and could expose you  
to the risk of electric shock or other ha-  
zards and can cause damage to the system  
that is not covered by warranty.  
This unit detects whether your vehicles park-  
ing brake is engaged or not, and prevents you  
from watching a DVD, Video CD or TV on the  
front display while driving. When you attempt  
to watch a DVD, Video CD or TV, the warning  
VIDEO VIEWING IS NOT AVAILABLE WHILE  
DRIVING will appear on the front display.  
To watch a DVD, Video CD or TV on the front  
display, park your vehicle in a safe place and  
apply the parking brake.  
When using a display connected  
8
9
Please remember to wear your seat belt at  
all times while operating your vehicle. If  
you are ever in an accident, your injuries  
can be considerably more severe if your  
seat belt is not properly buckled.  
to REAR MONITOR OUT  
This units REAR MONITOR OUT is for con-  
nection of a display to enable passengers in  
the rear seats to watch the DVD, Video CD or  
TV.  
Never use headphones while driving.  
7
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Section  
01  
Precautions  
WARNING  
NEVER install the rear display in a location that  
enables the driver to watch the DVD, Video CD or  
TV while driving.  
To avoid battery exhaustion  
Be sure to run the vehicle engine while using  
this unit. Using this unit without running the  
engine can result in battery drainage.  
WARNING  
Do not use with vehicles that do not feature an  
ACC position.  
8
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Section  
Before You Start  
02  
Video CD  
Information to User  
Alteration or modifications carried out without  
appropriate authorization may invalidate the  
users right to operate the equipment.  
CD  
For Canadian model  
This Class B digital apparatus complies with  
Canadian ICES-003.  
Note  
It is not possible to play back DVD audio disc.  
This player can only play back discs bearing the  
marks shown above.  
About this unit  
The tuner frequencies on this unit are allo-  
cated for use in North America. Use in other  
areas may result in poor reception.  
DVD video disc region numbers  
DVD video discs that have incompatible region  
numbers cannot be played on this player. The  
region number of the player can be found on  
the bottom of this unit.  
Important (Serialnumber)  
The illustration below shows the regions and  
corresponding region numbers.  
The serial number is located on the bottom of  
this unit. For your own security and convenience,  
be sure to record this number on the enclosed  
warranty card.  
Playable discs  
DVD, Video CD and CD discs that display the  
logos shown below can be played back on this  
player.  
When combined with a Pioneer  
navigation unit  
DVD video  
We recommend that you use the latest version  
of the navigation map disc that is correspond-  
ing to the touch panel operation.  
9
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Section  
02  
Before You Start  
When you use this unit with the Pioneer DVD  
navigation unit, make sure that you use the  
map disc CNDV-21 or later. This manual ex-  
plains the operations with the combined use  
of them.  
If you do not use the map disc CNDV-21 but  
use an older version with the navigation unit,  
this unit may have some failures or inconve-  
niences as follows:  
We recommend that you familiarize yourself  
with the functions and their operation by read-  
ing through the manual before you begin  
using this unit. It is especially important that  
you read and observe precautions noted on  
the next page and in other sections.  
!
ENTERTAINMENT button and WIDE button  
cannot function as POS button and  
NAVI MENU button.  
After-sales service for  
Pioneer products  
Please contact the dealer or distributor from  
where you purchased this unit for after-sales  
service (including warranty conditions) or any  
other information. In case the necessary infor-  
mation is not available, please contact the  
companies listed below:  
Please do not ship your unit to the companies  
at the addresses listed below for repair without  
advance contact.  
!
NAVI (navigation unit), such as DVD video  
from the combined Pioneer navigation unit  
with DVD video playback, cannot be se-  
lected as a source.  
In NAVI MIXING, the settings other than  
ALL cannot be selected.  
Voice-recognition control system of the  
combined Pioneer navigation unit cannot  
function properly. The voice operation for  
navigation can be used, but the voice op-  
eration related to AV equipment cannot be  
used.  
Route guidance of the combined Pioneer  
navigation unit cannot function properly  
when some other source images are dis-  
played. Guidance by voice can be obtained,  
but on guidance by display (e.g. switching  
to an enlarged map of an intersection) can-  
not be obtained.  
!
!
U.S.A.  
Pioneer Electronics (USA) Inc.  
CUSTOMER SUPPORT DIVISION  
P.O. Box 1760  
Long Beach, CA 90801-1760  
800-421-1404  
!
!
CANADA  
Pioneer Electronics of Canada, Inc.  
CUSTOMER SATISFACTION DEPARTMENT  
300 Allstate Parkway  
NAVI (navigation unit wallpaper) cannot be  
selected as a background display.  
Markham, Ontario L3R OP2  
(905) 479-4411  
1-877-283-5901  
About this manual  
For warranty information please see the Lim-  
ited Warranty sheet included with this unit.  
This unit features a number of sophisticated  
functions ensuring superior reception and op-  
eration. All the functions have been designed  
for the easiest possible use, but many are not  
self-explanatory. This operation manual will  
help you benefit fully from this units potential  
and to maximize your listening enjoyment.  
10  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Section  
Before You Start  
02  
Product registration  
Visit us at the following site:  
CAUTION:  
USE OF CONTROLOR ADJUSTMENT OR  
PERFORMANCE OF PROCEDURES  
OTHER THAN THOSE SPECIFIED HEREIN  
MAY RESULT IN HAZARDOUS RADIATION  
EXPOSURE.  
1
Register your product. We will keep the details  
of your purchase on file to help you refer to  
this information in the event of an insurance  
claim such as loss or theft.  
Receive updates on the latest products and  
technologies.  
Download owners manuals, order product  
catalogues, research new products, and  
much more.  
CAUTION:  
THE USE OF OPTICALINSTRUMENTS  
WITH THIS PRODUCT WILL INCREASE  
EYE HAZARD.  
2
3
!
Keep this manual handy as a reference for  
operating procedures and precautions.  
Always keep the volume low enough so  
that you can hear sounds from outside the  
vehicle.  
!
!
!
Protect this unit from moisture.  
If the battery is disconnected or dis-  
charged, the preset memory will be erased  
and must be reprogrammed.  
Precautions  
WARNING:  
Handling the cord on this product or cords asso-  
ciated with accessories sold with the product will  
expose you to lead, a chemical known to the  
State of California and other governmental enti-  
ties to cause cancer and birth defects or other re-  
productive harm. Wash hands after handling.  
Features  
Touch panelkey operation  
It is possible to operate this unit by using  
touch panel key.  
This product contains mercury. Disposal of this  
material may be regulated due to environmental  
considerations. For disposal or recycling informa-  
tion, please contact your local authorities or the  
Electronics Industries Alliance: www.eiae.org.  
DVD video playback  
It is possible to play back DVD video, DVD-R  
(video mode) and DVD-RW (video mode).  
Remember that use of this system for com-  
mercial or public viewing purposes may con-  
stitute an infringement on the authors rights  
protected by the Copyright Law.  
Video CDs featuring PBC compatibility  
It is possible to play back Video CDs featuring  
PBC (playback control).  
CD playback  
Music CD/CD-R/CD-RW playback is possible.  
11  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Section  
02  
Before You Start  
MP3 file playback  
!
DTSis a registered trademark of Digital  
You can play back MP3 files recorded on CD-  
ROM/CD-R/CD-RW (ISO9660 Level 1/Level 2  
standard recordings).  
Theater Systems, Inc.  
!
Supply of this product only conveys a li-  
cense for private, non-commercial use and  
does not convey a license nor imply any  
right to use this product in any commercial  
(i.e. revenue-generating) real time broad-  
casting (terrestrial, satellite, cable and/or  
any other media), broadcasting/streaming  
via internet, intranets and/or other net-  
works or in other electronic content distri-  
bution systems, such as pay-audio or  
audio-on-demand applications. An inde-  
pendent license for such use is required.  
For details, please visit  
Multi-aspect  
Switching between wide screen, letterbox and  
panscan display is possible.  
Multi-audio  
You can switch between multiple audio sys-  
tems recorded on a DVD as desired.  
Multi-subtitle  
You can switch between multiple subtitle lan-  
guages recorded on a DVD as desired.  
http://www.mp3licensing.com.  
Multi-angle  
You can switch between multiple viewing an-  
gles of a scene recorded on a DVD as desired.  
WMA file playback  
You can play back WMA files recorded on CD-  
ROM/CD-R/CD-RW (ISO9660 Level 1/Level 2  
standard recordings).  
Note  
This product incorporates copyright protection  
technology that is protected by method claims of  
certain U.S. patents and other intellectual prop-  
erty rights owned by Macrovision Corporation  
and other rights owners. Use of this copyright  
protection technology must be authorized by  
Macrovision Corporation, and is intended for  
home and other limited viewing uses only unless  
otherwise authorized by Macrovision Corporation.  
Reverse engineering or disassembly is  
NTSC compatibility  
This unit is NTSC system compatible. When  
connecting other components to this unit, be  
sure components are compatible with the  
same video system otherwise images will not  
be correctly reproduced.  
Dolby Digital/DTS compatibility  
When using this unit with a Pioneer multi-  
channel processor, you can enjoy the atmo-  
sphere and excitement provided by DVD movie  
and music software featuring 5.1 channel re-  
cordings.  
prohibited.  
!
Manufactured under license from Dolby La-  
boratories. Dolbyand the double-D sym-  
bol are trademarks of Dolby Laboratories.  
12  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Section  
Before You Start  
About WMA  
02  
For viewing LCD comfortably  
Due to its construction, the view angle of the  
LCD screen is limited. The viewing angle (verti-  
cal and horizontal) can be increased, however,  
by using BRIGHT to adjust the black density of  
the video. When using for the first time, adjust  
the black density in accordance with the view-  
ing angle (vertical and horizontal) to adjust for  
clear viewing. DIMMER can also be used to  
adjust the brightness of the LCD screen itself  
to suit your personal preference.  
The Windows Media" logo printed on the box  
indicates that this unit can play back WMA  
data.  
WMA is short for Windows Media Audio and  
refers to an audio compression technology  
that is developed by Microsoft Corporation.  
WMA data can be encoded by using Windows  
Media Player version 7 or later.  
Microsoft, Windows Media, and the Windows  
logo are trademarks, or registered trademarks  
of Microsoft Corporation in the United States  
and/or other countries.  
What the marks on DVDs  
indicate  
The marks below may be found on DVD disc  
labels and packages. They indicate the type of  
images and audio recorded on the disc, and  
the functions you can use.  
Mark  
Meaning  
Notes  
Indicates the number of audio sys-  
tems.  
2
!
!
With some applications used to encode WMA  
files, this unit may not operate correctly.  
With some applications used to encode WMA  
files, album names and other text information  
may not be correctly displayed.  
Indicates the number of subtitle lan-  
guages.  
2
Indicates the number of viewing an-  
gles.  
3
Indicates the picture size (aspect ratio:  
screen width-to-height ratio) type.  
16 : 9 LB  
To protect the LCD screen  
1
Indicates the number of the region  
where playback is possible.  
ALL  
!
Do not allow direct sunlight to fall on the  
display when this unit is not being used.  
Extended exposure to direct sunlight can  
result in LCD screen malfunction due to  
the resulting high temperatures.  
When an operation is prohibited  
When you are watching a DVD and attempt to  
perform an operation, it may not be performed  
because of the programming on the disc.  
When this happens, the icon appears on  
the screen.  
!
When using a portable phone, keep the an-  
tenna of the portable phone away from the  
display to prevent disruption of the video by  
the appearance of spots, colored stripes,  
etc.  
!
The icon may not appear with certain  
discs.  
13  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Section  
02  
Before You Start  
Resetting the microprocessor  
Pressing RESET lets you reset the micropro-  
cessor to its initial settings.  
The microprocessor must be reset under the  
following conditions:  
Use and care of the remote  
control  
Installing the battery  
Slide the tray out on the back of the remote  
control and insert the battery with the plus (+)  
and minus () poles pointing in the proper di-  
rection.  
!
Prior to using this unit for the first time  
after installation  
!
!
If the unit fails to operate properly  
When strange or incorrect messages ap-  
pear on the display  
!
When using for the first time, pull out the  
film protruding from the tray.  
1
2
Turn the ignition switch OFF.  
Press RESET with a pen tip or other  
pointed instrument.  
WARNING  
Keep the battery out of the reach of children.  
Should the battery be swallowed, immediately  
consult a doctor.  
CAUTION  
RESET button  
!
!
Use only one CR2025 (3 V) lithium battery.  
Remove the battery if the remote control is not  
used for a month or longer.  
Notes  
!
Do not recharge, disassemble, heat or dispose  
of the battery in fire.  
Do not handle the battery with metallic tools.  
Do not store the battery with metallic materi-  
als.  
In the event of battery leakage, wipe the re-  
mote control completely clean and install a  
new battery.  
When disposing of used batteries, please  
comply with governmental regulations or en-  
vironmental public institutionsrules that  
apply in your country/area.  
!
!
When using with a Pioneer navigation unit, if  
you press RESET, be sure ACC OFF is se-  
lected. If ACC ON is selected, correct opera-  
tion may not be possible even if you press  
RESET.  
After completing connections or when you  
want to erase all memorized settings or return  
the unit to its initial (factory) settings, switch  
your engine ON or set the ignition switch to  
ACC ON before pressing RESET.  
!
!
!
!
14  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Section  
Before You Start  
02  
Using the remote control  
Point the remote control in the direction of the  
front panel to operate.  
!
The remote control may not function prop-  
erly in direct sunlight.  
Important  
!
!
Do not store the remote control in high tem-  
peratures or direct sunlight.  
Do not let the remote control fall onto the  
floor, where it may become jammed under the  
brake or accelerator pedal.  
About the XM READY mark  
The XM READY mark printed on the front  
panel indicates that the Pioneer XM tuner  
(sold separately) can be controlled by this unit.  
Please inquire to your dealer or nearest  
authorized Pioneer service station regarding  
the XM tuner that can be connected to this  
unit. For XM tuner operation, please refer to  
the XM tuner owners manual.  
Notes  
!
XM Satellite Radio is developing a new band  
of radio in the U.S.A.  
The system will use direct satellite-to-receiver  
broadcasting technology to provide listeners  
in their cars and at home with crystal-clear  
sound seamlessly from coast to coast. XM will  
create and package up to 100 channels of di-  
gital-quality music, news, sports, talk and chil-  
drens programming.  
!
The XM name and related logos are trade-  
marks of XM Satellite Radio Inc.  
15  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Section  
03  
Whats What  
1 2  
3
4 5 6  
7
8
9
a
b
m l k j i h  
g
f e d  
c
Press to turn the clock display on or off  
when the LCD panel is closed.  
Head unit  
1 DISPLAY button  
Press to select different displays.  
6 OPEN/CLOSE button  
Press to open or close the LCD panel.  
2 PGM button  
Press to operate the preprogrammed func-  
tions for each source. (Refer to Using the  
7 ENTERTAINMENT button  
Press to switch between the background  
displays.  
3 Sub display  
8 WIDE button  
Press to select a desired mode for enlarging  
a 4:3 picture to a 16:9 one.  
Displays the basic information for the each  
source and the other settings when the LCD  
panel is closed.  
9 V.ADJ button  
Press and hold to display the picture adjust-  
ment menu.  
4 Ambient light sensor  
Senses ambient light. This system automati-  
cally adjusts the brightness of the display to  
compensate for ambient light.  
a RESET button  
Press to return to the factory settings (initial  
settings).  
5 FLIP DOWN/CLOCK button  
Press to turn the LCD panel horizontal tem-  
porarily from upright position.  
16  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Section  
Whats What  
03  
b DETACH button  
m VOLUME  
Press to remove the front panel from the  
head unit.  
Rotate it to increase or decrease the  
volume.  
c EJECT button  
Press to eject a disc from this unit.  
d Joystick  
Move to do manual seek tuning, fast for-  
ward, reverse and track search controls.  
Also used for controlling functions.  
e EQ button  
Press to select various equalizer curves.  
f BAND/ESC button  
Press to select among three FM bands and  
one AM band and to cancel the control  
mode of functions.  
g ANGLE (+/) button  
Press to change the LCD panel angle.  
h ATT button  
Press to quickly lower the volume level, by  
about 90%. Press once more to return to the  
original volume level.  
i BACK/TEXT button  
Press to return to the previous display.  
j REAR ON button  
Press to watch a DVD/Video CD on a rear  
display if DVD (built-in DVD player) is not  
selected as the source.  
k Disc loading slot  
Insert a disc to play.  
l SOURCE button  
This unit is turned on by selecting a source.  
Press to cycle through all the available  
sources.  
17  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Section  
03  
Whats What  
2 3 4  
r
j
q
o
m
k
i
h
5
6
8
a
c
e
1
7
9
b
d
f
g
6 Remote control operation mode switch  
Switch the operation mode between AVH,  
DVD and TV modes. Normally, set to AVH.  
Remote control  
1 Remote control selection switch  
Switch to change the setting of the remote  
control. For details, refer to Setting remote  
!
AVH For common operation of this  
unit  
!
!
DVD Only for DVD player operation  
TV Only for TV tuner operation  
2 VOLUME buttons  
Press to increase or decrease the volume.  
For details, refer to Using the remote control  
operation mode switch on the next page.  
3 REAR.S button  
7 DIRECT button  
Press to do direct channel select when  
using an XM tuner.  
Press to watch a DVD/Video CD on a rear  
display if DVD (built-in DVD player) is not  
selected as the source.  
8 BOOKMARK (BOOK.M) button  
AVH mode  
Press to operate the preprogrammed func-  
tions for each source. (Refer to Using the  
4 SOURCE button  
This unit is turned on by selecting a source.  
Press to cycle through all the available  
sources.  
DVD mode  
5 Joystick  
Press to turn the bookmark function on or  
off. For details, refer to Resume playback  
Move to do manual seek tuning, fast for-  
ward, reverse and track search controls.  
Also used for controlling functions.  
18  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Section  
Whats What  
03  
9 BACK button  
l STEP (r/q) button  
Press to return to the previous display.  
Press to move ahead one frame at a time  
during DVD/VideoCD playback. Press and  
hold for one second to activate slow play-  
back.  
a BAND/ESC button  
Press to select among three FM bands and  
one AM band and to cancel the control  
mode of functions.  
m SUBTITLE (S.TITLE) button  
Press to change the subtitle language dur-  
ing DVD playback.  
b ENTERTAINMENT button  
Press to switch between the background  
displays.  
n DISPLAY button  
Press to select different displays.  
c FORWARD (n) button  
Press to perform fast forward.  
o AUDIO button  
Press to change the audio language during  
DVD playback.  
d STOP (g) button  
Press to stop playback.  
p RETURN button  
e NEXT (p) button  
Press to go to the next track (chapter).  
Press to display the PBC (playback control)  
menu during PBC playback.  
f CLEAR button  
q MENU button  
Press to cancel the input number when  
010 are used.  
Press to display the DVD menu during DVD  
playback.  
g 010 buttons  
r TOP MENU (TOP.M) button  
Press to return to the top menu during DVD  
playback.  
Press to directly select the desired track,  
preset tuning or disc. Buttons 16 can oper-  
ate the preset tuning for the tuner or disc  
number search for the multi-CD player.  
Using the remote control  
operation mode switch  
There are three remote control operation  
modes on the remote control.  
h PREVIOUS (o) button  
Press to return to the previous track (chap-  
ter).  
i REVERSE (m) button  
Press to perform fast reverse.  
AVH mode operation  
When operating this unit by remote control,  
the mode is normally switched to AVH.  
j PLAY/PAUSE (f) button  
Press to switch sequentially between play-  
back and pause.  
!
The joystick on the remote control can per-  
form the same operations as the one on  
the head unit. Furthermore, the joystick  
can perform the same operations as the  
touch panel keys a, b, c and d.  
k ANGLE button  
Press to change the viewing angle during  
DVD playback.  
19  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Section  
03  
Whats What  
!
16 can perform the same operations as  
the preset tuning keys P1P6 and the disc  
selection keys 0106.  
%
When you want to operate the follow-  
ing functions only on the rear display,  
switch the mode to TV:  
If you want to select a disc located at 7  
to 12 by using buttons 16, press and  
hold the corresponding numbers, such  
as 1 for disc 7, until the disc number ap-  
pears in the display.  
!
!
!
When performing manual or seek tuning by  
moving the joystick left or right.  
When recalling preset stations by moving  
the joystick up or down.  
When confirming current channel and  
other settings by pressing DIRECT.  
DVD mode operation  
Note  
If you switch the mode to DVD, the joystick  
and 010 operations are changed for DVD  
player.  
With the mode switched to TV, you cannot use  
any buttons but SOURCE and VOLUME. The joy-  
stick is also available in TV mode operation.  
%
When you want to operate the follow-  
ing functions, switch the mode to DVD:  
!
!
!
When operating the DVD menu by using  
the joystick. (Refer to Operating the DVD  
When operating the PBC menu by using  
010. (Refer to Watching a Video CD on  
When specifying title by using 010. (Refer  
to Specifying title on page 36.)  
Note  
With the mode switched to DVD, you cannot use  
these buttons; BACK, ENTERTAINMENT and  
DISPLAY.  
TV mode operation  
If you use the rear output on TV tuner, you can  
watch the TV picture on the rear display inde-  
pendently. To operate the TV on the rear dis-  
play independently, switch the mode to TV. In  
this case, the joystick operation is changed for  
TV.  
!
For details concerning operation, refer to  
the TV tuners operation manuals.  
20  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Section  
Basic Operations  
04  
%
When using the button, press SOURCE  
Turning the unit on and  
selecting a source  
to select a source.  
Press SOURCE repeatedly to switch between  
the following sources:  
XM (XM tuner)TUNER (tuner)TV (televi-  
sion)AV (video input)DVD (built-in DVD  
player)S-DVD (DVD player/multi-DVD  
player)M-CD (multi-CD player)EXT-1 (ex-  
ternal unit 1)EXT-2 (external unit 2)AUX  
(AUX)NAVI (navigation unit)  
1
Notes  
!
In the following cases, the sound source will  
not change:  
1 Source icon  
Shows which source has been selected.  
When there is no unit corresponding to the  
selected source connected to this unit.  
When there is no disc in the unit.  
When there is no disc in the DVD player.  
When there is no magazine in the multi-  
CD player.  
When there is no magazine in the multi-  
DVD player.  
When the AUX (auxiliary input) is set to off  
(refer to page 89).  
You can select a source you want to listen to. If  
DVD DISC AUTO is turned on, load a disc in  
the unit to switch to DVD (refer to Switching  
%
When using the touch panel keys,  
touch the source icon and then touch the  
desired source name.  
The source names are displayed and select-  
able ones are highlighted.  
When the AV (video input) is not set to  
VIDEO (refer to page 93).  
!
!
External unit refers to a Pioneer product (such  
as one available in the future) that, although  
incompatible as a source, enables control of  
basic functions by this unit. Two external units  
can be controlled by this unit. When two exter-  
nal units are connected, the allocation of  
them to external unit 1 or external unit 2 is  
automatically set by this unit.  
When this units blue/white lead is connected  
to the vehicles auto-antenna relay control  
terminal, the vehicles antenna extends when  
this units source is turned on. To retract the  
antenna, turn the source off.  
!
!
!
!
!
!
!
!
!
!
!
!
DVD Built-in DVD player  
S-DVD DVD player/multi-DVD player  
M-CD Multi-CD player  
TUNER Tuner  
TV Television  
AV Video input  
EXT-1 External unit 1  
EXT-2 External unit 2  
AUX AUX  
XM XM tuner  
NAVI Navigation unit  
OFF Turn the unit off  
#
When the source icon is not displayed, you  
can display it by touching the screen.  
To return to the playback display, touch ESC.  
When using with a Pioneer navigation unit,  
the cars antenna extends regardless of turn-  
ing this unit on or off.  
#
21  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Section  
04  
Basic Operations  
Loading a disc  
Turning the unit off  
%
Insert a disc into the disc loading slot.  
Playback will automatically start.  
If DVD AUTO PLAY is on, SOME DISCS MAY  
%
When using the touch panel keys,  
touch the source icon and then touch OFF.  
When the source icon is not displayed, you  
can display it by touching the screen.  
#
#
NOT FULLY OPERATE ON THIS SYSTEM is dis-  
%
When using the button, press SOURCE  
and hold until the unit turns off.  
#
When a disc is loaded in this unit, touch the  
source icon and then touch DVD to select DVD.  
If DVD DISC AUTO is turned off, touch the  
#
source icon and then touch DVD to select DVD  
Using the rear display  
You can watch a DVD/Video CD on the rear  
display regardless of whether DVD (built-in  
DVD player) is selected as the source or not.  
#
To eject a disc, press EJECT.  
Notes  
!
To watch a DVD/Video CD on the rear dis-  
play only, switch the operation mode on the  
remote control to DVD. And you can oper-  
ate the DVD/Video CD playback on the rear  
display independently by the remote con-  
trol. (Refer to page 19.)  
!
!
The DVD player plays one, standard, 12-cm or  
8-cm (single) disc at a time. Do not use an  
adapter when playing 8-cm discs.  
Do not insert anything other than a disc into  
the disc loading slot. Discs which can be  
played back are listed on Playable discs on  
page 9.  
CAUTION  
!
If you cannot insert a disc completely or if  
after you insert a disc the disc does not play,  
check that the label side of the disc is up.  
Press EJECT to eject the disc, and check the  
disc for damage before inserting it again.  
If the DVD player does not operate properly,  
an error message such as ERROR-02 may be  
displayed. Refer to Error messages on page  
If bookmark function is on, DVD playback re-  
sumes from the selected point. For more de-  
When you have turned the DVD/Video CD play-  
back on by pressing REAR ON, you cannot turn it  
off even if you press SOURCE and hold. In this  
case, press REAR ON to turn the DVD/Video CD  
playback off.  
!
!
%
Press REAR ON to watch a DVD/Video  
CD on the rear display when DVD (built-in  
DVD player) is not selected as the source.  
DVD/Video CD playback is turned on and the  
illumination color of REAR ON changes into  
the different color than the other buttons.  
#
You can also turn the DVD/Video CD playback  
on by pressing REAR.S on the remote control.  
To turn the DVD/Video CD playback off, press  
#
REAR ON again.  
Adjusting the volume  
%
Use VOLUME to adjust the sound level.  
Note  
With the head unit, rotate VOLUME to in-  
crease or decrease the volume.  
With the remote control, press VOLUME to in-  
crease or decrease the volume.  
When a Pioneer navigation unit is connected to  
this unit, the navigation image can be displayed  
on the rear display. (Refer to page 94.)  
22  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Section  
Basic Operations  
04  
Displaying the navigation  
image  
Touch panelkey basic  
operation  
You can display navigation map and naviga-  
tion menu on this display.  
Activating the touch panelkeys  
!
You can operate these functions only when  
a Pioneer navigation unit is connected to  
this unit.  
Displaying navigation map  
%
#
Press WIDE to display navigation map.  
When the map is scrolled, pressing this but-  
ton returns to the display of the map of your sur-  
roundings.  
1
1 Touch panel keys  
Touch to do various operations.  
Displaying navigation menu  
%
Press ENTERTAINMENT to display navi-  
1
Touch the screen to activate the touch  
gation menu when the navigation map is  
panel keys corresponding to each source.  
displayed.  
The touch panel keys appear on the display.  
#
You cannot use ENTERTAINMENT on the re-  
#
To go to the next group of touch panel keys,  
mote control.  
touch d.  
2
#
Touch ESC to hide the touch panel keys.  
You can also hide the touch panel keys by  
Switching to the navigation image  
pressing BAND/ESC.  
%
Press V.ADJ to switch the display to na-  
vigation image.  
To return to the video of each source, press  
V.ADJ again.  
Note  
#
If you do not use the touch panel keys within 30  
seconds, they will be hidden automatically.  
23  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Section  
04  
Basic Operations  
Operating the menu  
Note  
If you do not operate the function within about 30  
seconds, the display is automatically returned to  
the playback display.  
23  
5
4
1
Operating the menu by using the  
joystick  
You can also perform most of the menu items  
by using the joystick.  
!
Switch the remote control operation mode  
to AVH to operate the menu by using the  
joystick on the remote control. (Refer to  
page 19.)  
1 FUNCTION key  
Touch to select functions for each source.  
1
Click the joystick during display of each  
2 AUDIO key  
Touch to select various sound quality con-  
trols.  
source to display MENU.  
MENU appears on the display.  
2
Move the joystick up or down and then  
3 SETUP key  
Touch to select various setup functions.  
click it to display the function names you  
want to operate.  
#
To go to the next group of function names,  
move the joystick to NEXT and click it.  
To return to the previous group of function  
names, move the joystick to PREV and click it.  
4 BACK key  
Touch to return to the previous display.  
#
5 ESC key  
Touch to cancel the control mode of func-  
tions.  
3
Press BAND/ESC to return to the display  
of each source.  
You can return to the previous display by  
1
Touch A.MENU to display MENU.  
MENU appears on the display.  
When A.MENU is not displayed, you can dis-  
play it by touching the screen.  
#
pressing BACK/TEXT.  
#
Opening and closing the  
LCD panel  
The LCD panel will be opened or closed auto-  
matically with the turning of the ignition  
switch on or off. You can turn off the automatic  
close/open function. (Refer to page 94.)  
2
Touch the desired key to display the  
function names you want to operate.  
To go to the next group of function names,  
touch NEXT.  
#
#
To return to the previous group of function  
names, touch PREV.  
!
Do not close the LCD panel with hands by  
force. That cause malfunction.  
The automatic close/open function will op-  
erate the display as follows.  
3
Touch ESC to return to the display of  
each source.  
!
24  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Section  
Basic Operations  
04  
When the ignition switch is turned OFF  
while the LCD panel is opened, the LCD  
panel will close after six seconds.  
When the ignition switch is turned ON  
again (or turned to ACC), the LCD panel  
will be opened automatically.  
Removing or attaching the front panel  
will automatically close or open the LCD  
panel. (Refer to page 27.)  
When the ignition switch is turned OFF  
after the LCD panel has been closed, turn-  
ing the ignition switch ON again (or turning  
it to ACC) will not open the LCD panel. In  
this case, press OPEN/CLOSE to open the  
LCD panel.  
When closing the LCD panel, check to  
make sure that it has closed completely. If  
the LCD panel has stopped halfway, leaving  
it like this could result in damage.  
#
The adjusted the LCD panel angle will be  
memorized and automatically returned to the  
next time the LCD panel is opened.  
!
Turning the LCD panelhorizontal  
When the LCD panel is upright and it hinders  
the operation of the air conditioner, the panel  
can be turned horizontal temporarily.  
!
%
Press FLIP DOWN/CLOCK to turn the  
LCD panel horizontal.  
To return to original position, press  
FLIP DOWN/CLOCK again.  
The LCD panel returns to the original position  
#
%
Press OPEN/CLOSE to open the LCD  
panel.  
To close the LCD panel, press OPEN/CLOSE  
again.  
#
#
automatically with beeping sound 10 seconds  
after operation.  
Adjusting the LCD panelangle  
Changing the wide screen  
mode  
You can select a desired mode for enlarging a  
4:3 picture to a 16:9 one.  
Important  
!
If you can hear the LCD panel knocking  
against your vehicles console or dashboard,  
press ANGLE () to move the LCD panel a lit-  
tle forward.  
When adjusting the LCD panel angle, be sure  
to press ANGLE (+/). Forcibly adjusting the  
LCD panel by hand may damage it.  
%
Press WIDE to select the desired set-  
!
ting.  
Press WIDE repeatedly to switch between the  
following settings:  
FULL (full)JUST (just)CINEMA (cinema)  
ZOOM (zoom)NORMAL (normal)  
%
Press ANGLE (+/) to adjust the LCD  
panel to an easily viewable angle.  
#
When a Pioneer navigation unit is connected  
The LCD panel angle continues changing as  
long as you press ANGLE (+/) and hold.  
to this unit, press WIDE and hold to select the de-  
sired setting. Press and hold WIDE repeatedly to  
switch between the settings.  
25  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Section  
04  
Basic Operations  
FULL (full)  
Adjusting the picture  
adjustment  
You can adjust BRIGHT (brightness),  
CONTRAST (contrast), COLOR (color) and  
HUE (hue) for each source and rear view cam-  
era.  
A 4:3 picture is enlarged in the horizontal direc-  
tion only, giving you a 4:3 TV picture (normal pic-  
ture) without any omissions.  
JUST (just)  
The picture is enlarged slightly at the center and  
the amount of enlargement increases horizontally  
to the ends, enabling you to enjoy a 4:3 picture  
without sensing any disparity even on a wide  
screen.  
!
The adjustments of BRIGHT and  
CONTRAST are stored separately for light  
ambient (daytime) and dark ambient (night-  
time). A sun  
or moon  
is displayed to  
the left of BRIGHT and CONTRAST, respec-  
tively, as the ambient light sensor deter-  
mines brightness or darkness.  
You cannot adjust COLOR or HUE for the  
audio source.  
CINEMA (cinema)  
The picture is enlarged by the same proportion as  
FULL or ZOOM in the horizontal direction and by  
an intermediate proportion between FULL and  
ZOOM in the vertical direction; ideal for a cine-  
ma-sized picture (wide screen picture) where cap-  
tions lie outside.  
!
1
Press V.ADJ and hold to display  
PICTURE ADJUST.  
Press V.ADJ until PICTURE ADJUST appears  
in the display.  
ZOOM (zoom)  
A 4:3 picture is enlarged in the same proportion  
both vertically and horizontally; ideal for a cine-  
ma-sized picture (wide screen picture).  
#
You cannot use MENU on the remote control.  
2
Touch any of the following touch panel  
keys to select the function to be adjusted.  
The adjustment function names are displayed  
and adjustable ones are highlighted.  
NORMAL (normal)  
A 4:3 picture is displayed as it is, giving you no  
sense of disparity since its proportions are the  
same as that of the normal picture.  
!
!
!
!
BRIGHT Adjust the black intensity  
CONTRAST Adjust the contrast  
COLOR Adjust the color saturation  
HUE Adjust the tone of color (red is em-  
phasized or green is emphasized)  
Notes  
!
!
Different settings can be memorized for each  
video source.  
When video is viewed in a wide screen mode  
that does not match its original aspect ratio, it  
may appear different.  
!
!
DIMMER Adjust the brightness of display  
B.CAMERA Switch to the picture adjust-  
ment display for the rear view camera  
SOURCE Return to the picture adjustment  
display for each source  
!
!
Remember that using the wide mode feature  
of this system for commercial or public view-  
ing purposes may constitute an infringement  
on the authors rights protected by the Copy-  
right Law.  
#
You can adjust the picture adjustment for rear  
view camera only when BACK UP CAMERA is  
turned on. (Refer to Setting for rear view camera  
#
With some backup cameras, picture adjust-  
!
!
Video will appear grainy when viewed in  
CINEMA or ZOOM mode.  
The navigation map and the backup camera  
picture is always FULL.  
ment may not be possible.  
26  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Section  
Basic Operations  
04  
3
Touch  
item.  
Each time you touch  
or  
to adjust the selected  
Note  
The icons indicating the current ambient bright-  
ness used for adjusting BRIGHT and CONTRAST  
may differ from DIMMER slightly.  
or it increases or  
decreases the level of selected item. +24 24  
is displayed as the level is increased or de-  
creased.  
4
Touch ESC to hide the touch panel keys.  
Protecting your unit from  
theft  
Adjusting the dimmer  
The front panel can be detached from the  
The adjustment of DIMMER is stored sepa-  
rately for each ambient light; daytime, evening  
and nighttime. The brightness of LCD screen  
will be adjusted to optimum level automati-  
cally in accordance with the ambient light  
based on the setting values.  
head unit to discourage theft.  
!
!
If the front panel is not detached from the  
head unit within five seconds of turning off  
the ignition, a warning tone will sound.  
You can turn off the warning tone. See  
1
Press V.ADJ and hold to display  
Important  
PICTURE ADJUST.  
!
Never use force or grip the display and the  
buttons too tightly when removing or attach-  
ing.  
Avoid subjecting the front panel to excessive  
shocks.  
Keep the front panel out of direct sunlight and  
high temperatures.  
If removed, replace the front panel on the unit  
before starting up your vehicle.  
Press V.ADJ until PICTURE ADJUST appears  
in the display.  
2
Touch DIMMER.  
!
!
!
The ambient light level used as the standard  
for adjusting DIMMER appears above the level  
bar.  
!
!
!
Orange sun  
bright ambient light (daytime)  
Red sun  
termediate brightness (evening)  
Adjust the brightness for  
Adjust the brightness for in-  
Removing the front panel  
Yellow moon  
Adjust the brightness for  
dark ambient light (nighttime)  
1
Press DETACH to remove the front  
panel.  
3
Touch  
Each time you touch  
wards the left or the right.  
or  
to adjust the brightness.  
Press DETACH and the right side of the front  
panel is removed from the head unit.  
or moves yellow to-  
The level indicates the brightness of the  
screen being adjusted. The farther yellow  
moves to the right, the brighter the screen.  
2
Gently grip the right side of the front  
panel and slowly pull it outward.  
Take care not to grip it too tightly or to drop  
the front panel and protect it from contact  
with water or other fluids to prevent perma-  
nent damage.  
4
Touch ESC to hide the touch panel keys.  
27  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Section  
04  
Basic Operations  
Attaching the front panel  
%
Replace the front panel by holding it  
upright to the unit and clipping it securely  
into the mounting hooks.  
28  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Section  
Tuner  
05  
1
Touch the source icon and then touch  
TUNER to select the tuner.  
When the source icon is not displayed, you  
can display it by touching the screen.  
Listening to the radio  
#
1
2
4
3
2
Touch the screen to display the touch  
panel keys.  
3
Touch BAND to select a band.  
Touch BAND repeatedly until the desired band  
is displayed, FM1, FM2, FM3 for FM or AM.  
4
To perform manual tuning, briefly  
76  
5
touch c or d.  
The frequencies move up or down step by  
step.  
These are the basic steps necessary to operate  
the radio. More advanced tuner operation is  
explained starting on the next page.  
#
You can also perform manual tuning by mov-  
ing the joystick left or right.  
1 Source icon  
Shows which source has been selected.  
5
To perform seek tuning, keep touching  
c or d for about one second and release.  
The tuner will scan the frequencies until a  
broadcast strong enough for good reception is  
found.  
2 Band indicator  
Shows which band the radio is tuned to, AM  
or FM.  
#
You can cancel seek tuning by briefly touching  
either c or d.  
If you keep touching c or d you can skip sta-  
3 Preset number indicator  
Shows which preset has been selected.  
#
tions. Seek tuning starts as soon as you release  
the key.  
#
4 Frequency indicator  
Shows to which frequency the tuner is  
tuned.  
You can also perform seek tuning by holding  
the joystick left or right.  
Note  
5 Preset list display  
Shows the preset list.  
If you do not use the touch panel keys within 30  
seconds, they will be hidden automatically.  
6 STEREO indicator  
Shows that the frequency selected is being  
broadcast in stereo.  
7 LOCAL indicator  
Shows when local seek tuning is on.  
29  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Section  
05  
Tuner  
%
When you find a frequency that you  
Introduction of advanced  
tuner operation  
want to store in memory keep touching  
one of preset tuning keys P1P6 until the  
preset number stops flashing.  
The number you have touched will flash in the  
preset number indicator and then remain lit.  
The selected radio station frequency has been  
stored in memory.  
The next time you touch the same preset tun-  
ing key the radio station frequency is recalled  
from memory.  
#
When the touch panel keys are not displayed,  
you can display them by touching the screen.  
When P1P6 are not displayed, you can dis-  
1
#
1 Function display  
play them by touching DISP.  
Shows the function names.  
Notes  
%
Touch A.MENU and then touch  
!
!
Up to 18 FM stations, six for each of the three  
FM bands, and six AM stations can be stored  
in memory.  
You can also use a and b to recall radio sta-  
tion frequencies assigned to preset tuning  
keys P1P6.  
FUNCTION to display the function names.  
The function names are displayed and oper-  
able ones are highlighted.  
#
When A.MENU is not displayed, you can dis-  
play it by touching the screen.  
You can also display MENU by clicking the  
joystick.  
#
#
#
To return to the previous display, touch BACK.  
To return to the frequency display, touch ESC.  
Tuning in strong signals  
Local seek tuning lets you tune in only those  
radio stations with sufficiently strong signals  
for good reception.  
Note  
If you do not operate the function within about 30  
seconds, the display is automatically returned to  
the frequency display.  
1
Touch A.MENU and FUNCTION and then  
touch LOCAL.  
2
#
Touch a to turn local seek tuning on.  
To turn local seek tuning off, touch b.  
Storing and recalling  
broadcast frequencies  
If you touch any of the preset tuning keys  
P1P6 you can easily store up to six broad-  
cast frequencies for later recall with the touch  
of a key.  
3
Touch c or d to set the sensitivity.  
There are four levels of sensitivity for FM and  
two levels for AM:  
FM: 1234  
AM: 12  
30  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Section  
Tuner  
05  
The 4 setting allows reception of only the  
strongest stations, while lower settings let you  
receive progressively weaker stations.  
Storing the strongest  
broadcast frequencies  
BSM (best stations memory) lets you automa-  
tically store the six strongest broadcast fre-  
quencies under preset tuning keys P1P6  
and once stored there you can tune in to those  
frequencies with the touch of a key.  
1
Touch A.MENU and FUNCTION and then  
touch BSM.  
2
Touch a to turn BSM on.  
BSM begins to flash. While BSM is flashing  
the six strongest broadcast frequencies will be  
stored under preset tuning keys P1P6 in  
order of their signal strength. When finished,  
BSM stops flashing.  
#
To cancel the storage process, touch b.  
Note  
Storing broadcast frequencies with BSM may re-  
place broadcast frequencies you have saved  
using P1P6.  
31  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Section  
06  
Playing DVD video discs  
Watching a DVD video  
8 Audio language indicator  
Shows which audio language has been se-  
lected.  
1
3
4
5
2
1
Touch the source icon and then touch  
DVD to select the DVD player.  
When the source icon is not displayed, you  
can display it by touching the screen.  
If no disc is loaded in the unit, you cannot se-  
#
#
lect DVD (DVD player). Insert a disc in the unit.  
(Refer to page 22.)  
#
With some discs, a menu may be displayed.  
6
7
8
These are the basic steps necessary to play a  
DVD video with your DVD player. More ad-  
vanced DVD video operation is explained start-  
2
Touch the screen to display the touch  
panel keys.  
3
To skip back or forward to another  
chapter, touch o or p.  
Touching p skips to the start of the next  
chapter. Touching o once skips to the start  
of the current chapter. Touching it again will  
skip to the previous chapter.  
Chapter numbers are displayed for eight sec-  
onds.  
1 Source icon  
Shows which source has been selected.  
2 DVD-V indicator  
Shows when a DVD video is playing.  
3 Title number indicator  
Shows the title currently playing.  
#
You can also skip back or forward to another  
chapter by moving the joystick left or right.  
4 Chapter number indicator  
Shows the chapter currently playing.  
4
Touch d to display m and n.  
Touch d until m and n appear in the dis-  
play.  
5 Play time indicator  
Shows the elapsed playing time of the cur-  
rent chapter.  
5
To perform fast forward or reverse,  
keep touching m or n.  
If you keep touching m or n for five sec-  
onds, the icon m or n changes into rever-  
sal indication. When this happens, fast  
reverse/fast forward continues even if you re-  
lease m or n. To resume playback at a de-  
sired point, touch f.  
6 Viewing angle indicator  
Shows which viewing angle has been se-  
lected.  
7 Subtitle language indicator  
Shows which subtitle language has been  
selected.  
#
You can also perform fast reverse/fast forward  
by holding the joystick left or right.  
32  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Section  
Playing DVD video discs  
06  
#
Fast forward/fast reverse may not be possible  
Skipping back or forward  
to another title  
at certain locations on some discs. If this hap-  
pens, normal playback automatically resumes.  
%
To skip back or forward to another title,  
touch a or b.  
Note  
Touching a skips to the start of the next title.  
Touching b skips to the start of the previous  
title.  
If you do not use the touch panel keys within 30  
seconds, they will be hidden automatically.  
Title numbers are displayed for eight seconds.  
#
You can also skip back or forward to another  
title by moving the joystick up or down.  
Operating the DVD menu  
Some DVDs allow you to select from the disc  
contents using a menu.  
Stopping playback  
!
You can display the menu by touching  
MENU or TOP.M while a disc is playing.  
Touching either of these keys again lets you  
start playback from the location selected  
from the menu. For details, refer to the in-  
structions provided with the disc.  
%
#
Touch g.  
When you stop DVD playback by touching g,  
that location on the disc is memorized, enabling  
playback from that point when you play the disc  
again.  
#
To play back the disc again, touch f.  
1
Touch  
to display touch panel keys  
ꢀ ꢁ  
to operate the DVD menu.  
When the touch panel keys are not displayed,  
you can display them by touching the screen.  
#
2
Touch a, b, c or d to select the desired  
menu item.  
3
Touch ENTER.  
Playback starts from the selected menu item.  
#
If you switch the remote control operation  
mode to DVD, the joystick on the remote control  
can also operate the DVD menu. (Refer to page  
19.)  
#
You cannot operate the DVD menu from the  
joystick on the head unit.  
The way to display the menu differs depending  
on the disc.  
#
33  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Section  
06  
Playing DVD video discs  
1
Touch A.MENU and FUNCTION and then  
Introduction of advanced  
DVD video operation  
touch REPEAT.  
2
Touch any of the following touch panel  
keys to select the repeat range.  
!
!
!
TITLE Repeat just the current title  
CHAPTER Repeat just the current chapter  
REPEAT OFF Play through the current  
disc  
Notes  
1
!
!
If you perform chapter search or fast forward/  
reverse, the repeat play range changes to  
REPEAT OFF.  
You cannot operate repeating play when  
DVD DISC AUTO is on (refer to Automatic  
1 Function display  
Shows the function names.  
%
Touch A.MENU and then touch  
FUNCTION to display the function names.  
The function names are displayed and oper-  
able ones are highlighted.  
#
When A.MENU is not displayed, you can dis-  
play it by touching the screen.  
You can also display MENU by clicking the  
joystick.  
Pausing DVD video playback  
Pause lets you temporarily stop disc playback.  
#
%
Touch f during playback.  
#
To go to the next group of function names,  
The icon e is displayed and playback is  
touch NEXT.  
#
names, touch PREV.  
#
#
paused, letting you view a still image.  
To return to the previous group of function  
#
To resume playback at the same point that you  
turned pause on, touch f again.  
To return to the previous display, touch BACK.  
To return to the playback display, touch ESC.  
Notes  
!
!
You can also turn pause function on or off  
using PAUSE. To display PAUSE, touch  
A.MENU and then touch FUNCTION.  
Depending on the disc and the playback loca-  
tion on the disc, the icon may be displayed,  
indicating that still playback is not possi-  
ble.  
Note  
If you do not operate the function within about 30  
seconds, the display is automatically returned to  
the playback display.  
Repeating play  
There are two repeat play ranges for the DVD  
playback: TITLE (title repeat) and CHAPTER  
(chapter repeat).  
34  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Section  
Playing DVD video discs  
06  
!
!
With some discs, images may be unclear dur-  
ing slow motion playback.  
Reverse slow motion playback is not possi-  
ble.  
Frame-by-frame playback  
This lets you move ahead one frame at a time  
during playback.  
%
Touch r during playback.  
Each time you touch r, you move ahead one  
frame.  
Searching for a desired  
scene, starting playback  
from a specified time  
#
To return to normal playback, touch f.  
Notes  
You can use the search function to search for  
a desired scene by specifying a title or chapter,  
and the time search function to specify the  
time on a disc at which play starts.  
!
Depending on the disc and the playback loca-  
tion on the disc, the icon may be displayed,  
indicating that frame-by-frame playback is not  
possible.  
!
Chapter search and time search are not  
possible when disc playback has been  
stopped.  
!
With some discs, images may be unclear dur-  
ing frame-by-frame playback.  
1
Touch A.MENU and FUNCTION and then  
SEARCH.  
Slow motion playback  
This lets you slow down playback speed.  
2
Touch TITLE (title), CHAP. (chapter) or  
TIME (time).  
1
Keep touching r until  
is displayed  
during playback.  
3
ber.  
Touch 09 to input the desired num-  
The icon  
is displayed, forward slow motion  
playback begins.  
For titles and chapters  
#
To return to normal playback, touch f.  
!
!
!
To select 3, touch 3.  
To select 10, touch 1 and 0 in that order.  
To select 23, touch 2 and 3 in that order.  
2
Touch q or r to adjust playback  
speed during slow motion playback.  
Each time you touch q or r it changes the  
speed in four steps in the following order:  
1/161/81/41/2  
For time (time search)  
!
To select 21 minutes 43 seconds, touch 2,  
1, 4 and 3 in that order.  
To select 1 hour 11 minutes, convert the  
time into 71 minutes 00 seconds and touch  
7, 1, 0 and 0 in that order.  
!
Notes  
#
#
To cancel the inputted numbers, touch C.  
You can also input the desired number by  
!
!
There is no sound during slow motion play-  
back.  
Depending on the disc and the playback loca-  
tion on the disc, the icon may be displayed,  
indicating that slow motion playback is not  
possible.  
using the joystick and 0-9.  
4
While the inputted number is dis-  
played, touch ENTER.  
This starts playback from the selected scene.  
35  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Section  
06  
Playing DVD video discs  
Notes  
Notes  
!
!
With discs featuring a menu, you can also  
touch MENU or TOP.M and then make selec-  
tions from the displayed menu.  
With some discs, the icon may be dis-  
played, indicating that titles, chapters and  
time cannot be specified.  
!
!
You can also switch between languages/audio  
systems using AUDIO on the remote control.  
The number in the  
2
mark on a DVDs pack-  
age indicates the number of recorded lan-  
guages/audio systems.  
With some DVDs, switching between lan-  
guages/audio systems may only be possible  
using a menu display.  
You can also switch between languages/audio  
systems using DVD SETUP. For details, refer  
Only digital output of DTS audio is possible. If  
this units optical digital outputs are not con-  
nected, DTS audio will not be output, so select  
an audio setting other than DTS.  
Display indications such as Dolby D and  
5.1ch indicate the audio system recorded on  
the DVD. Depending on the setting, playback  
may not be with the same audio system as  
that indicated.  
!
!
!
Specifying title  
You can use the direct search function to  
search for a desired scene by specifying a title.  
!
Only the remote control can operate this  
function. To perform this function, switch  
the remote control operation mode to DVD.  
(Refer to page 19.)  
!
!
%
Press 010 corresponding to a desired  
title number when the disc is stopped.  
Title number is displayed for eight seconds  
and playback starts from the selected title.  
Touching AUDIO during fast forward/fast re-  
verse, pause or slow motion playback returns  
you to normal playback.  
!
!
!
To select 3, press 3.  
To select 10, press 10 and 0 in that order.  
To select 23, press 10, 10 and 3 in that  
order.  
Changing the subtitle  
language during playback  
(Multi-subtitle)  
Changing audio language  
during playback (Multi-audio)  
With DVDs featuring multi-subtitle recordings,  
you can switch between subtitle languages  
during playback.  
DVDs can provide audio playback with differ-  
ent languages and different systems (Dolby Di-  
gital, DTS etc.). With DVDs featuring multi-  
audio recordings, you can switch between lan-  
guages/audio systems during playback.  
%
Touch SUB.T during playback.  
Each time you touch SUB.T it switches be-  
tween subtitle languages.  
%
Touch AUDIO during playback.  
Each time you touch AUDIO it switches be-  
tween audio systems.  
Notes  
!
You can also switch between subtitle lan-  
guages using SUBTITLE (S.TITLE) on the re-  
mote control.  
36  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Section  
Playing DVD video discs  
06  
2
!
!
!
!
The number in the  
mark on a DVDs pack-  
Resume playback (Bookmark)  
The Bookmark function lets you resume play-  
back from a selected scene the next time the  
disc is loaded.  
age indicates the number of recorded subtitle  
languages.  
With some DVDs, switching between subtitle  
languages may only be possible using a menu  
display.  
You can also switch between subtitle lan-  
guages using DVD SETUP. For details, refer to  
Touching SUB.T during fast forward/fast re-  
verse, pause or slow motion playback returns  
you to normal playback.  
%
During playback, press  
BOOKMARK (BOOK.M) at the point you  
want to resume playback next time.  
The selected scene will be bookmarked so that  
playback resumes from that point next time.  
You can bookmark up to five discs. After that,  
the oldest bookmark is replaced by the new  
one.  
#
To clear the bookmark on a disc, press and  
hold BOOKMARK (BOOK.M) during playback.  
You can also bookmark a disc by pressing and  
Changing the viewing angle  
during playback (Multi-angle)  
With DVDs featuring multi-angle (scenes shot  
from multiple angles) recordings, you can  
switch among viewing angles during play-  
back.  
#
holding EJECT at the point you want to bookmark.  
Next time you load the disc, playback will resume  
from the bookmarked point. Note that you can  
only bookmark one disc using this method. To  
clear the bookmark on a disc, press EJECT.  
!
During playback of a scene shot from mul-  
tiple angles, the angle icon is dis-  
played. Turn angle icon display on or off  
using DVD SETUP. For details, refer to Set-  
Selecting audio output  
You can switch between stereo and monaural  
audio output.  
%
Touch ANGLE during playback of a  
!
This function is not possible when disc  
playback has been stopped.  
scene shot from multiple angles.  
Each time you touch ANGLE it switches be-  
tween angles.  
1
Touch A.MENU and FUNCTION and then  
touch NEXT.  
Notes  
2
Touch L/R SELECT.  
!
!
You can also changing angle using ANGLE on  
the remote control.  
3
Touch L+R (left and right), L (left) and R  
The  
mark on a DVDs package indicates it  
features multi-angle scenes. The number in  
the mark indicates the number of angles  
3
(right).  
Note  
3
from which scenes were shot.  
!
Touching ANGLE during fast forward/fast re-  
verse, pause or slow motion playback returns  
you to normal playback.  
Depending on the disc and the playback location  
on the disc, the icon may be displayed, indicat-  
ing that operating this function is not possible.  
37  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Section  
07  
Playing Video CDs  
#
With a Video CD featuring the PBC (playback  
Watching a Video CD  
control) function, a menu is displayed.  
1
3
4
2
2
Switch the remote control operation  
mode to DVD and then press 010 to select  
the desired menu item.  
Playback starts from the selected menu item.  
#
When the menu is two or more pages long,  
touch o or p to switch between displays.  
You can display the menu by pressing  
#
RETURN during PBC playback. For details, refer  
to the instructions provided with the disc.  
#
After operating the menu, we recommend  
5
that you switch remote control operation mode to  
AVH. (Refer to page 19.)  
These are the basic steps necessary to play a  
Video CD with your DVD player. More ad-  
vanced Video CD operation is explained start-  
3
Touch the screen to display the touch  
panel keys.  
4
To skip back or forward to another  
1 Source icon  
Shows which source has been selected.  
track, touch o or p.  
Touching p skips to the start of the next  
track. Touching o once skips to the start of  
the current track. Touching it again will skip to  
the previous track.  
2 Video CD indicator  
Shows when a Video CD is playing.  
Track numbers are displayed for eight sec-  
onds.  
3 Track number indicator  
Shows the track currently playing.  
#
You can also skip back or forward to another  
track by moving the joystick left or right.  
During PBC playback, a menu may be dis-  
played if you perform these operations.  
4 Play time indicator  
Shows the elapsed playing time of the cur-  
rent track.  
#
5
Touch d to display m and n.  
5 Audio output indicator  
Shows the output channel selected cur-  
rently.  
Touch d until m and n appear in the dis-  
play.  
6
To perform fast forward or reverse,  
1
Touch the source icon and then touch  
DVD to select the DVD player.  
When the source icon is not displayed, you  
can display it by touching the screen.  
If no disc is loaded in the unit, you cannot se-  
keep touching m or n.  
If you keep touching m or n for five sec-  
onds, the icon m or n changes into rever-  
sal indication. When this happens, fast  
reverse/fast forward continues even if you re-  
lease m or n. To resume playback at a de-  
sired point, touch f.  
#
#
lect DVD (DVD player). Insert a disc in the unit.  
(Refer to page 22.)  
38  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Section  
Playing Video CDs  
07  
#
You can also perform fast reverse/fast forward  
Introduction of advanced  
Video CD operation  
by holding the joystick left or right.  
#
Fast forward/fast reverse may not be possible  
at certain locations on some discs. If this hap-  
pens, normal playback automatically resumes.  
Note  
If you do not use the touch panel keys within 30  
seconds, they will be hidden automatically.  
1
Stopping playback  
1 Function display  
Shows the function names.  
%
#
Touch g.  
When you stop Video CD playback (during  
PBC playback only) by touching g, that location  
on the disc is memorized, enabling playback  
from that point when you play the disc again.  
%
Touch A.MENU and then touch  
FUNCTION to display the function names.  
The function names are displayed and oper-  
able ones are highlighted.  
#
To play back the disc again, touch f.  
#
When A.MENU is not displayed, you can dis-  
play it by touching the screen.  
You can also display MENU by clicking the  
joystick.  
#
PBC playback  
#
To go to the next group of function names,  
During playback of Video CDs featuring PBC  
(Playback Control), PBC ON is displayed. Dur-  
ing such playback, search and time search  
functions cannot be used nor can you select  
the range for repeat play.  
touch NEXT.  
#
To return to the previous group of function  
names, touch PREV.  
#
#
To return to the previous display, touch BACK.  
To return to the playback display, touch ESC.  
Note  
Note  
PBC playback of Video-CD cannot be  
cancelled.  
If you do not operate the function within about 30  
seconds, the display is automatically returned to  
the playback display.  
Repeating play  
There are two repeat play ranges for the Video  
CD playback: TRACK (track repeat) and DISC  
(disc repeat).  
39  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Section  
07  
Playing Video CDs  
!
During playback of Video CDs featuring  
PBC (playback control), this function can-  
not be operated.  
%
Touch r during playback.  
Each time you touch r, you move ahead one  
frame.  
#
To return to normal playback, touch f.  
1
Touch A.MENU and FUNCTION and then  
touch REPEAT.  
Notes  
!
Depending on the disc and the playback loca-  
tion on the disc, the icon may be displayed,  
indicating that frame-by-frame playback is not  
possible.  
With some discs, images may be unclear dur-  
ing frame-by-frame playback.  
2
Touch either of the following touch  
panel keys to select the repeat range.  
!
!
TRACK Repeat just the current track  
DISC Repeat the current disc  
!
Note  
If you perform track search or fast forward/re-  
verse, the repeat play range changes to DISC.  
Slow motion playback  
This lets you slow down playback speed.  
Pausing Video CD playback  
Pause lets you temporarily stop disc playback.  
1
Keep touching r until  
is displayed  
during playback.  
The icon  
is displayed, forward slow motion  
%
Touch f during playback.  
playback begins.  
The icon e is displayed and playback is  
#
To return to normal playback, touch f.  
paused, letting you view a still image.  
#
To resume playback at the same point that you  
2
Touch q or r to adjust playback  
turned pause on, touch f again.  
speed during slow motion playback.  
Each time you touch q or r it changes the  
speed in four steps in the following order:  
1/161/81/41/2  
Notes  
!
!
You can also turn pause function on or off  
using PAUSE. To display PAUSE, touch  
A.MENU and then touch FUNCTION.  
Depending on the disc and the playback loca-  
tion on the disc, the icon may be displayed,  
indicating that still playback is not possi-  
ble.  
Notes  
!
!
There is no sound during slow motion play-  
back.  
Depending on the disc and the playback loca-  
tion on the disc, the icon may be displayed,  
indicating that slow motion playback is not  
possible.  
!
!
With some discs, images may be unclear dur-  
ing slow motion playback.  
Reverse slow motion playback is not possi-  
ble.  
Frame-by-frame playback  
This lets you move ahead one frame at a time  
during playback.  
40  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Section  
Playing Video CDs  
07  
Searching for a desired  
scene, starting playback  
from a specified time  
You can use the search function to search for  
a desired scene by specifying a track, and the  
time search function to specify the time on a  
disc at which play starts.  
Selecting audio output  
You can switch between stereo and monaural  
audio output.  
!
This function is not possible when disc  
playback has been stopped.  
1
Touch A.MENU and FUNCTION and then  
touch NEXT.  
!
!
1
During playback of Video CDs featuring  
PBC (playback control), this function can-  
not be operated.  
Time search is not possible when disc play-  
back has been stopped.  
2
Touch L/R SELECT.  
3
Touch L+R (left and right), L (left) and R  
(right).  
Notes  
Touch A.MENU and FUNCTION and then  
SEARCH.  
!
You can also switch between stereo and mon-  
aural audio output using AUDIO on the re-  
mote control.  
Depending on the disc and the playback loca-  
tion on the disc, the icon may be displayed,  
indicating that operating this function is not  
possible.  
2
Touch TRACK (track) or TIME (time).  
Touch 09 to input the desired num-  
3
ber.  
For tracks  
!
!
!
!
To select 3, touch 3.  
To select 10, touch 1 and 0 in that order.  
To select 23, touch 2 and 3 in that order.  
For time (time search)  
!
To select 21 minutes 43 seconds, touch 2,  
1, 4 and 3 in that order.  
!
To select 1 hour 11 minutes, convert the  
time into 71 minutes 00 seconds and touch  
7, 1, 0 and 0 in that order.  
#
#
To cancel the inputted numbers, touch C.  
You can also input the desired number by  
using the joystick and 0-9.  
4
While the inputted number is dis-  
played, touch ENTER.  
This starts playback from the selected  
scene.  
41  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Section  
08  
Playing CDs  
#
If no disc is loaded in the unit, you cannot se-  
Listening to a CD  
lect DVD (DVD player). Insert a disc in the unit.  
(Refer to page 22.)  
1
3
4
2
2
Touch the screen to display the touch  
panel keys.  
3
To skip back or forward to another  
track, touch o or p.  
Touching p skips to the start of the next  
track. Touching o once skips to the start of  
the current track. Touching it again will skip to  
the previous track.  
6
5
Track numbers are displayed for eight sec-  
onds.  
These are the basic steps necessary to play a  
CD with your DVD player. More advanced CD  
operation is explained starting on the next  
#
You can also skip back or forward to another  
track by moving the joystick left or right.  
4
Touch d to display m and n.  
Touch d until m and n appear in the dis-  
play.  
1 Source icon  
Shows which source has been selected.  
5
To perform fast forward or reverse,  
keep touching m or n.  
You can also perform fast reverse/fast forward  
2 CD indicator  
Shows when a CD is playing.  
#
by holding the joystick left or right.  
3 Track number indicator  
Shows the track currently playing.  
Notes  
4 Play time indicator  
Shows the elapsed playing time of the cur-  
rent track.  
!
!
When playing discs with MP3/WMA files and  
audio data (CD-DA) such as CD-EXTRA and  
MIXED-MODE CDs, both types can be played  
only by switching mode between MP3/WMA  
and CD-DA by touching DA-ROM or pressing  
BAND/ESC. This function can be operated  
only when the disc is playing.  
If you do not use the touch panel keys within  
30 seconds, they will be hidden auto-  
matically.  
5 Disc title indicator  
Shows the title of the currently playing disc.  
6 Repeat indicator  
Shows when repeat range is selected to cur-  
rent track.  
1
Touch the source icon and then touch  
DVD to select the DVD player.  
When the source icon is not displayed, you  
#
can display it by touching the screen.  
42  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Section  
Playing CDs  
08  
Stopping playback  
Introduction of advanced  
CD operation  
%
#
Touch g.  
When you stop CD playback by touching g,  
that location on the disc is memorized, enabling  
playback from that point when you play the disc  
again.  
#
To play back the disc again, touch f.  
1
1 Function display  
Shows the function names.  
%
Touch A.MENU and then touch  
FUNCTION to display the function names.  
The function names are displayed and oper-  
able ones are highlighted.  
#
When A.MENU is not displayed, you can dis-  
play it by touching the screen.  
You can also display MENU by clicking the  
joystick.  
#
#
To go to the next group of function names,  
touch NEXT.  
#
To return to the previous group of function  
names, touch PREV.  
#
#
To return to the previous display, touch BACK.  
To return to the playback display, touch ESC.  
Note  
If you do not operate the function within about 30  
seconds, the display is automatically returned to  
the playback display.  
Repeating play  
Repeat play lets you hear the same track over  
again.  
43  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Section  
08  
Playing CDs  
1
Touch A.MENU and FUNCTION and then  
3
When you find the desired track touch  
touch REPEAT.  
b to turn scan play off.  
2
Touch either of the following touch  
Note  
panel keys to select the repeat range.  
After scanning of a CD is finished, normal play-  
back of the tracks will begin again.  
!
!
TRACK Repeat just the current track  
DISC Repeat the current disc  
Notes  
!
!
If you perform track search or fast forward/re-  
verse, repeat play is automatically cancelled.  
When playing discs with MP3/WMA files and  
audio data (CD-DA), repeat play performs  
within the currently playing data type even if  
DISC is selected.  
Pausing CD playback  
Pause lets you temporarily stop disc playback.  
%
Touch f during playback.  
PAUSE appears in the display. Play of the cur-  
rent track pauses.  
#
To resume playback at the same point that you  
turned pause on, touch f again.  
Playing tracks in a random  
order  
Random play lets you play back tracks on the  
CD in a random order.  
Note  
You can also turn pause function on or off using  
PAUSE. To display PAUSE, touch A.MENU and  
then touch FUNCTION.  
1
Touch A.MENU and FUNCTION and then  
touch RANDOM.  
Searching for a desired track  
You can use the search function to specify a  
track to search for a desired track.  
2
Touch a to turn random play on.  
Tracks will play in a random order.  
To turn random play off, touch b.  
#
1
Touch A.MENU and FUNCTION and then  
SEARCH.  
Scanning tracks of a CD  
Scan play lets you hear the first 10 seconds of  
2
Touch TRACK.  
each track on the CD.  
3
Touch 09 to input the desired num-  
ber.  
!
!
1
Touch A.MENU and FUNCTION and then  
To select 3, touch 3.  
To select 10, touch 1 and 0 in that order.  
To select 23, touch 2 and 3 in that order.  
touch SCAN.  
!
2
Touch a to turn scan play on.  
#
#
To cancel the inputted numbers, touch C.  
You can also input the desired number by  
The first 10 seconds of each track is played.  
using the joystick and 0-9.  
44  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Section  
Playing CDs  
08  
4
While the inputted number is dis-  
you touch  
it will display a letter in the re-  
played, touch ENTER.  
verse order, such as Z Y X ... C B A.  
This starts playback from the selected track.  
Entering disc titles  
You can input CD titles and display the title.  
The next time you insert a CD for which you  
have entered a title, the title of that CD will be  
displayed.  
6
Touch  
to move the cursor to the  
Use the disc title input feature to store up to  
48 CD titles in the unit. Each title can be up to  
10 characters long.  
next character position.  
When the desired letter is displayed, touch  
to move the cursor to the next next position  
!
When playing a CD TEXT disc, you cannot  
switch to TITLE EDIT. The disc title will  
have already been recorded on a CD TEXT  
disc.  
and then select the next letter. Touch  
move backwards in the display.  
to  
7
Touch OK to store the entered title in  
!
If no title has been entered for the currently  
playing disc, NO TITLE is displayed.  
memory.  
8
play.  
Touch ESC to return to the playback dis-  
1
Play the CD that you want to enter a  
title for.  
Notes  
2
Touch A.MENU and FUNCTION and then  
!
!
Titles remain in memory, even after the disc  
has been removed from the unit, and are re-  
called when the disc is reinserted.  
After data for 48 discs has been stored in  
memory, data for a new disc will overwrite the  
oldest one.  
touch NEXT.  
3
4
Touch TITLE EDIT.  
Touch ABC to select the desired charac-  
ter type.  
Touch ABC repeatedly to switch between the  
following character types:  
Alphabet (upper case), numbers and symbols  
Alphabet (lower case)European letters,  
such as those with accents (e.g., á, à, ä, ç)  
Using CD TEXT functions  
Some discs have certain information encoded  
on the disc during manufacture. These discs  
may contain such information as the CD title,  
track title, artists name and playback time  
and are called CD TEXT discs. Only these spe-  
cially encoded CD TEXT discs support the  
functions listed below.  
#
You can select to input numbers and symbols  
by touching 123.  
5
Touch  
alphabet.  
Each time you touch  
or  
to select a letter of the  
it will display a letter  
of the alphabet in AB C ... X Y Z , numbers  
and symbols in 1 2 3 ... | } ¯ order. Each time  
45  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Section  
08  
Playing CDs  
Displaying titles on CD TEXT discs  
%
Touch DISP.  
Touch DISP repeatedly to switch between the  
following settings:  
Disc Title (disc title)Disc Artist (disc artist  
name)TrackTitle (track title)Track Artist  
(track artist name)  
#
If specific information has not been recorded  
on a CD TEXT disc, NO XXXX will be displayed  
(e.g., NO ARTIST).  
Scrolling titles in the display  
This unit can display the first 30 letters only of  
Disc Title, Disc Artist, TrackTitle and  
Track Artist. When the recorded information  
is longer than 30 letters, you can scroll the text  
to the left so that the rest of the title can be  
seen.  
%
Keep touching DISP until the title be-  
gins to scroll to the left.  
The rest of the title will appear in the display.  
Selecting tracks from the track  
title list  
Track title list lets you see the list of track titles  
on a CD TEXT disc and select one of them to  
play back.  
1
Touch A.MENU and FUNCTION and then  
touch TRACK LIST.  
2
Touch  
or  
to switch between the  
lists of titles.  
3
Touch your favorite track title.  
That selection will begin to play.  
46  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Section  
Playing MP3/WMA  
09  
7 Repeat indicator  
Shows the selected repeat range.  
Listening to MP3/WMA  
1
4
5
2
3
1
Touch the source icon and then touch  
DVD to select the DVD player.  
When the source icon is not displayed, you  
can display it by touching the screen.  
If no disc is loaded in the unit, you cannot se-  
#
#
lect DVD (DVD player). Insert a disc in the unit.  
(Refer to page 22.)  
2
Touch the screen to display the touch  
panel keys.  
6
7
3
To skip back or forward to another  
These are the basic steps necessary to play an  
MP3/WMA with your built-in DVD player. More  
advanced MP3/WMA operation is explained  
starting on page 49.  
track, touch o or p.  
Touching p skips to the start of the next  
track. Touching o once skips to the start of  
the current track. Touching it again will skip to  
the previous track.  
1 Source icon  
Shows which source has been selected.  
Track numbers are displayed for eight sec-  
onds.  
#
You can also skip back or forward to another  
2 ROM indicator  
track by moving the joystick left or right.  
Shows when the MP3/WMA file is playing.  
When playing discs with MP3/WMA files  
and audio data (CD-DA) such as CD-EXTRA  
and MIXED-MODE CDs, CD/ROM is dis-  
played.  
4
Touch d to display a, b, m and n.  
Touch d until a, b, m and n appear in  
the display.  
5
To perform fast forward or reverse,  
keep touching m or n.  
You can also perform fast reverse/fast forward  
by holding the joystick left or right.  
3 Folder number indicator  
Shows the number of folder currently play-  
ing.  
#
#
#
There is no sound on fast forward or reverse.  
This is fast forward and reverse operation only  
4 Track number indicator  
Shows the track (file) currently playing.  
for the file being played. This operation is can-  
celed when the previous or next file is reached.  
5 Play time indicator  
Shows the elapsed playing time of the cur-  
rent track (file).  
6
#
Touch a or b to select a folder.  
You can also select a folder by moving the joy-  
stick up or down.  
To return to folder 001 (ROOT), press and hold  
BAND/ESC. However, if folder 001 (ROOT) con-  
tains no files, playback commences with folder  
002.  
6 Folder name indicator  
Shows the name of folder currently playing.  
#
47  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Section  
09  
Playing MP3/WMA  
#
You cannot select a folder that does not have  
!
If you do not use the touch panel keys within  
30 seconds, they will be hidden auto-  
matically.  
an MP3/WMA file recorded in it.  
Notes  
!
When playing discs with MP3/WMA files and  
audio data (CD-DA) such as CD-EXTRA and  
MIXED-MODE CDs, both types can be played  
only by switching mode between MP3/WMA  
and CD-DA by touching DA-ROM or pressing  
BAND/ESC. This function can be operated  
only when the disc is playing.  
Stopping playback  
%
#
Touch g.  
When you stop MP3/WMA playback by touch-  
ing g, that location on the disc is memorized, en-  
abling playback from that point when you play  
the disc again.  
!
!
!
If you have switched between playback of  
MP3/WMA files and audio data (CD-DA), play-  
back starts at the first track on the disc.  
This DVD player can play back an MP3/WMA  
file recorded on CD-ROM. (Refer to page 103  
for files that can be played back.)  
There is sometimes a delay between starting  
up CD playback and the sound being issued.  
When being read in, FORMAT READis dis-  
played.  
#
To play back the disc again, touch f.  
!
Playback is carried out in order of file number.  
Folders are skipped if they contain no files. (If  
folder 001 (ROOT) contains no files, playback  
commences with folder 002.)  
!
!
This unit does not play back WMA files re-  
corded as VBR (variable bit rate).  
When playing back files recorded as VBR  
(variable bit rate) files, the play time will not be  
correctly displayed if fast forward or reverse  
operations are used.  
!
!
If the inserted disc contains no files that can  
be played back, NO AUDIO is displayed.  
If the inserted disc contains WMA files that  
are protected by digital rights management  
(DRM) , TRK SKIPPED is displayed while the  
protected file is skipped.  
!
!
If all the files on the inserted disc are secured  
by DRM, PROTECT is displayed.  
When a disc contains both WMA files which  
are protected by DRM and audio data (CD-  
DA), both types cannot be switched. In this  
case, only audio data will be played back.  
There is no sound on fast forward or reverse.  
!
48  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Section  
Playing MP3/WMA  
09  
TRACK (one-track repeat) and DISC (repeat all  
tracks).  
Introduction of advanced  
built-in DVD player (MP3/  
WMA) operation  
1
Touch A.MENU and FUNCTION and then  
touch REPEAT.  
2
Touch any of the following touch panel  
keys to select the repeat range.  
!
!
!
FOLDER Repeat the current folder  
TRACK Repeat just the current track  
DISC Repeat all tracks  
Notes  
1
!
!
If you select another folder during repeat play,  
the repeat play range changes to DISC.  
If you perform track search or fast forward/re-  
verse during TRACK, the repeat play range  
changes to FOLDER.  
When FOLDER is selected, it is not possible to  
play back a subfolder of that folder.  
When playing discs with MP3/WMA files and  
audio data (CD-DA), repeat play performs  
within the currently playing data type even if  
DISC is selected.  
1 Function display  
Shows the function names.  
%
Touch A.MENU and then touch  
!
!
FUNCTION to display the function names.  
The function names are displayed and oper-  
able ones are highlighted.  
When A.MENU is not displayed, you can dis-  
play it by touching the screen.  
You can also display MENU by clicking the  
joystick.  
#
#
#
To go to the next group of function names,  
touch NEXT.  
Playing tracks in a random  
order  
Random play lets you play back tracks in a  
random order within the repeat range,  
FOLDER and DISC.  
#
To return to the previous group of function  
names, touch PREV.  
#
#
To return to the previous display, touch BACK.  
To return to the playback display, touch ESC.  
Note  
1
Select the repeat range.  
If you do not operate the function within about 30  
seconds, the display is automatically returned to  
the playback display.  
2
Touch A.MENU and FUNCTION and then  
touch RANDOM.  
3
Touch a to turn random play on.  
Repeating play  
For MP3/WMA playback, there are three re-  
peat play ranges: FOLDER (folder repeat),  
Tracks will play in a random order within the  
previously selected FOLDER or DISC ranges.  
#
To turn random play off, touch b.  
49  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Section  
09  
Playing MP3/WMA  
Scanning folders and tracks  
Searching for a desired  
track in the current folder  
You can use the search function to specify a  
track to search for a desired track.  
While you are using FOLDER, the beginning of  
each track in the selected folder plays for  
about 10 seconds. When you are using DISC,  
the beginning of the first track of each folder  
is played for about 10 seconds.  
!
Track search is not possible when disc play-  
back has been stopped.  
1
Select the repeat range.  
1
Touch A.MENU and FUNCTION and then  
SEARCH.  
2
Touch A.MENU and FUNCTION and then  
2
Touch TRACK.  
touch SCAN.  
3
ber.  
!
Touch 09 to input the desired num-  
3
Touch a to turn scan play on.  
The first 10 seconds of each track of the cur-  
rent folder (or the first track of each folder) is  
played.  
To select 3, touch 3.  
To select 10, touch 1 and 0 in that order.  
To select 23, touch 2 and 3 in that order.  
!
!
#
#
To cancel the inputted numbers, touch C.  
You can also input the desired number by  
4
When you find the desired track (or  
folder) touch b to turn scan play off.  
using the joystick and 0-9.  
Note  
4 While the inputted number is dis-  
played, touch ENTER.  
This starts playback from the selected track.  
After track or folder scanning is finished, normal  
playback of the tracks will begin again.  
Displaying text information  
on MP3/WMA disc  
Pausing MP3/WMA playback  
Pause lets you temporarily stop disc playback.  
Text information recorded on a MP3/WMA  
disc can be displayed.  
%
Touch f during playback.  
PAUSE appears in the display. Play of the cur-  
rent track pauses.  
%
Touch DISP.  
Touch DISP repeatedly to switch between the  
following settings:  
#
To resume playback at the same point that you  
turned pause on, touch f again.  
Folder Name (folder name)File Name (file  
name)Track Title (track title)Artist Name  
(artist name)Album Title (album title)  
Comment (comment)Bit Rate (bit rate)  
Note  
You can also turn pause function on or off using  
PAUSE. To display PAUSE, touch A.MENU and  
then touch FUNCTION.  
#
When playing back WMA files, album title and  
comment are not displayed.  
When playing back MP3 files recorded as VBR  
(variable bit rate) files, the bit rate value is not dis-  
#
50  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Section  
Playing MP3/WMA  
09  
played even after switching to bit rate. (VBR will  
3
Touch your favorite file name (or folder  
be displayed.)  
name).  
#
If specific information has not been recorded  
When you select the file, that selection will  
begin to play.  
on an MP3/WMA disc, NO XXXX will be dis-  
played (e.g., NO NAME).  
#
When you have selected a folder, a list of the  
#
Press and hold BACK/TEXT displays TRACK  
names of the files (or the folders) in it can be  
viewed. Repeat 2 and 3 to select the desired file  
name.  
(track title), ARTIST (artist name) and ALBUM  
(album title) at a time.  
#
To return to the previous list (the folder one  
level higher), touch  
.
Scrolling text information  
in the display  
This unit can display the first 30 letters only of  
Folder Name, File Name, Track Title,  
Artist Name, Album Title and Comment.  
When the recorded information is longer than  
30 letters, you can scroll the text to the left so  
that the rest of the text information can be  
seen.  
%
Keep touching DISP until the text infor-  
mation begins to scroll to the left.  
The rest of the text information will appear in  
the display.  
Selecting tracks from the  
file name list  
File name list lets you see the list of file names  
(or folder names) and select one of them to  
playback.  
1
Touch A.MENU and FUNCTION and then  
touch FOLDER&TRACK LIST.  
2
Touch  
or  
to switch between the  
lists of names.  
51  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Section  
10  
Multi-CD Player  
3
Touch any of 0106 to select a disc you  
Listening to a CD  
want to listen to.  
If you want to select a disc located at 7 to 12,  
touch PREV or NEXT to display 0712.  
1
3
4
2
#
When 0106 and 0712 are not displayed,  
you can display them by touching DISP.  
You can also sequentially select a disc by  
using a/b.  
#
4
To skip back or forward to another  
track, touch c or d.  
Touching d skips to the start of the next track.  
Touching c once skips to the start of the cur-  
rent track. Touching again will skip to the pre-  
vious track.  
5
You can use this unit to control a multi-CD  
player, which is sold separately.  
These are the basic steps necessary to play a  
CD with your multi-CD player. More advanced  
CD operation is explained starting on the next  
#
You can also skip back or forward to another  
track by moving the joystick left or right.  
5
To perform fast forward or reverse,  
keep touching c or d.  
You can also perform fast reverse/fast forward  
#
by holding the joystick left or right.  
1 Source icon  
Shows which source has been selected.  
Notes  
2 Disc number indicator  
Shows the disc currently playing.  
!
!
When the multi-CD player performs the pre-  
paratory operations, READY is displayed.  
If the multi-CD player does not operate prop-  
erly, an error message such as ERROR-02  
may be displayed. Refer to the multi-CD player  
owners manual.  
If there are no discs in the multi-CD player ma-  
gazine, NO DISC is displayed.  
If you do not use the touch panel keys within  
30 seconds, they will be hidden auto-  
matically.  
3 Track number indicator  
Shows the track currently playing.  
4 Play time indicator  
Shows the elapsed playing time of the cur-  
rent track.  
!
!
5 Disc list display  
Shows the disc title list.  
1
Touch the source icon and then touch  
M-CD to select the multi-CD player.  
When the source icon is not displayed, you  
can display it by touching the screen.  
50-disc multi-CD player  
#
Only those functions described in this manual  
are supported for 50-disc multi-CD players.  
This unit is not designed to operate disc title  
list functions with a 50-disc multi-CD player.  
2
Touch the screen to display the touch  
panel keys.  
52  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Section  
Multi-CD Player  
10  
peat), TRACK (one-track repeat) and DISC  
(disc repeat).  
Introduction of advanced  
multi-CD player operation  
1
Touch A.MENU and FUNCTION and then  
touch REPEAT.  
2
Touch  
to select the repeat range.  
Touch  
repeatedly until the desired repeat  
range appears in the display.  
!
M-CD Repeat all discs in the multi-CD  
player  
!
!
TRACK Repeat just the current track  
DISC Repeat the current disc  
1
#
You can also select the repeat range by mov-  
1 Function display  
ing the joystick left or right.  
Shows the function names.  
Notes  
%
Touch A.MENU and then touch  
!
!
If you select other discs during repeat play,  
the repeat play range changes to M-CD.  
If you perform track search or fast forward/re-  
verse during TRACK, the repeat play range  
changes to DISC.  
FUNCTION to display the function names.  
The function names are displayed and oper-  
able ones are highlighted.  
#
When A.MENU is not displayed, you can dis-  
play it by touching the screen.  
You can also display MENU by clicking the  
joystick.  
#
#
To go to the next group of function names,  
touch NEXT.  
Playing tracks in a random  
order  
#
To return to the previous group of function  
names, touch PREV.  
Random play lets you play back tracks in a  
random order within the repeat range, M-CD  
and DISC.  
#
#
To return to the previous display, touch BACK.  
To return to the playback display, touch ESC.  
Note  
1
Select the repeat range.  
If you do not operate the function within about 30  
seconds, the display is automatically returned to  
the playback display.  
2
Touch A.MENU and FUNCTION and then  
touch RANDOM.  
3
Touch a to turn random play on.  
Tracks will play in a random order within the  
previously selected M-CD or DISC ranges.  
Repeating play  
There are three repeat play ranges for the  
multi-CD player: M-CD (multi-CD player re-  
#
To turn random play off, touch b.  
53  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Section  
10  
Multi-CD Player  
multi-CD player magazine. After you have  
added your favorite tracks to the playlist you  
can turn on ITS play and play just those selec-  
tions.  
Scanning CDs and tracks  
While you are using DISC, the beginning of  
each track on the selected disc plays for about  
10 seconds. When you are using M-CD, the  
beginning of the first track of each disc is  
played for about 10 seconds.  
Creating a playlist with ITS  
programming  
1
Select the repeat range.  
You can use ITS to enter and play back up to  
99 tracks per disc, up to 100 discs (with the  
disc titles). (With multi-CD players sold before  
the CDX-P1250 and CDX-P650, up to 24 tracks  
can be stored in the playlist.)  
2
Touch A.MENU and FUNCTION and then  
touch SCAN.  
3
Touch a to turn scan play on.  
1
Play a CD that you want to program.  
The first 10 seconds of each track of the cur-  
rent disc (or the first track of each disc) is  
played.  
Touch a or b to select the CD.  
2
Touch A.MENU and FUNCTION and then  
touch NEXT.  
4
When you find the desired track (or  
disc) touch b to turn scan play off.  
3
4
Touch ITS MEMORY.  
Touch c or d to select the desired  
Note  
After track or disc scanning is finished, normal  
playback of the tracks will begin again.  
track.  
5
Touch a to store the currently playing  
track in the playlist.  
MEMORYa is highlighted and the currently  
playing selection is added to your playlist. The  
display then shows track number again.  
Pausing CD playback  
Pause lets you temporarily stop disc playback.  
Note  
1
Touch A.MENU and FUNCTION and then  
touch PAUSE.  
After data for 100 discs has been stored in mem-  
ory, data for a new disc will overwrite the oldest  
one.  
2
Touch a to turn pause on.  
Play of the current track pauses.  
#
To turn pause off, touch b.  
Playback from your ITS playlist  
ITS play lets you listen to the tracks that you  
have entered into your ITS playlist. When you  
turn on ITS play, tracks from your ITS playlist  
in the multi-CD player will begin to play.  
Using ITS playlists  
ITS (instant track selection) lets you make a  
playlist of favorite tracks from those in the  
54  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Section  
Multi-CD Player  
10  
#
If there are no tracks from your playlist in the  
1
Select the repeat range.  
current range, ITS EMPTY is displayed and nor-  
mal play resumes.  
2
Touch A.MENU and FUNCTION and then  
touch NEXT.  
Erasing a CD from your ITS playlist  
When you want to delete all tracks of a CD  
from your ITS playlist, you can if ITS play is off.  
3
4
Touch ITS PLAY.  
Touch a to turn ITS play on.  
Playback begins of those tracks from your  
playlist within the previously selected M-CD or  
DISC ranges.  
1
Play the CD that you want to delete.  
Touch a or b to select the CD.  
#
If no tracks in the current range are pro-  
2
Touch A.MENU and FUNCTION and then  
grammed for ITS play then ITS EMPTY is dis-  
played.  
touch NEXT.  
#
To turn ITS play off, touch b.  
3
4
Touch ITS MEMORY.  
Touch b to erase all tracks on the cur-  
Erasing a track from your ITS  
playlist  
When you want to delete a track from your ITS  
playlist, you can if ITS play is on.  
rently playing CD from your ITS playlist.  
All tracks on the currently playing CD are  
erased from your playlist.  
If ITS play is already on, skip to step 2.  
1
Play the CD with the track you want to  
Using disc title functions  
You can input CD titles and display the titles.  
Then you can easily search for and play a de-  
sired disc.  
delete from your ITS playlist, and turn ITS  
play on.  
Refer to Playback from your ITS playlist on the  
previous page.  
2
Touch A.MENU and FUNCTION and then  
Entering disc titles  
touch NEXT.  
Use the disc title input feature to store up to  
100 CD titles (with ITS playlist) into the multi-  
CD player. Each title can be up to 10 charac-  
ters long.  
3
4
Touch ITS MEMORY.  
Touch c or d to select the desired  
!
When playing a CD TEXT disc on a CD TEXT  
compatible multi-CD player, you cannot  
switch to TITLE EDIT. The disc title will  
have already been recorded on a CD TEXT  
disc.  
track.  
5
Touch b to erase the track from your  
ITS playlist.  
The currently playing selection is erased from  
your ITS playlist and playback of the next track  
from your ITS playlist begins.  
55  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Section  
10  
Multi-CD Player  
1
Play the CD that you want to enter a  
8
Touch ESC to return to the playback dis-  
title for.  
play.  
Touch a or b to select the CD.  
Notes  
2
Touch A.MENU and FUNCTION and then  
!
!
Titles remain in memory, even after the disc  
has been removed from the magazine, and  
are recalled when the disc is reinserted.  
After data for 100 discs has been stored in  
memory, data for a new disc will overwrite the  
oldest one.  
touch NEXT.  
3
4
Touch TITLE EDIT.  
Touch ABC to select the desired charac-  
ter type.  
Touch ABC repeatedly to switch between the  
following character types:  
Alphabet (upper case), numbers and symbols  
Alphabet (lower case)European letters,  
such as those with accents (e.g., á, à, ä, ç)  
Displaying disc titles  
You can display the title of any disc that has  
had a disc title entered.  
#
You can select to input numbers and symbols  
by touching 123.  
%
Touch DISP.  
Touch DISP repeatedly to switch between the  
following settings:  
DISC LIST (disc list)Disc Title (disc title)  
When you select Disc Title, the title of the cur-  
rently playing disc is shown in the display.  
5
Touch  
alphabet.  
Each time you touch  
or  
to select a letter of the  
it will display a letter  
of the alphabet in AB C ... X Y Z , numbers  
and symbols in 1 2 3 ... | } ¯ order. Each time  
you touch  
verse order, such as Z Y X ... C B A.  
#
If no title has been entered for the currently  
it will display a letter in the re-  
playing disc, NO TITLE is displayed.  
Using CD TEXT functions  
You can use these functions only with a CD  
TEXT compatible multi-CD player.  
Some discs have certain information encoded  
on the disc during manufacture. These discs  
may contain such information as the CD title,  
track title, artists name and playback time  
and are called CD TEXT discs. Only these spe-  
cially encoded CD TEXT discs support the  
functions listed below.  
6
Touch  
to move the cursor to the  
next character position.  
When the desired letter is displayed, touch  
to move the cursor to the next next position  
and then select the next letter. Touch  
move backwards in the display.  
to  
7
Touch OK to store the entered title in  
memory.  
56  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Section  
Multi-CD Player  
10  
Displaying titles on CD TEXT discs  
Using compression and  
bass emphasis  
You can use these functions only with a multi-  
CD player that supports them.  
Using COMP (compression) and DBE (dy-  
namic bass emphasis) functions lets you ad-  
just the sound playback quality of the multi-  
CD player. Each of the functions has a two-  
step adjustment. The COMP function balances  
the output of louder and softer sounds at high-  
er volumes. DBE boosts bass levels to give  
playback a fuller sound. Listen to each of the  
effects as you select them and use the one  
that best enhances the playback of the track  
or CD that you are listening to.  
%
Touch DISP.  
Touch DISP repeatedly to switch between the  
following settings:  
DISC LIST (disc list)Disc Title (disc title)  
Disc Artist (disc artist name)TrackTitle  
(track title)Track Artist (track artist name)  
#
If specific information has not been recorded  
on a CD TEXT disc, NO XXXX will be displayed  
(e.g., NO ARTIST).  
Scrolling titles in the display  
This unit can display the first 30 letters only of  
Disc Title, Disc Artist, TrackTitle and  
Track Artist. When the recorded information  
is longer than 30 letters, you can scroll the text  
to the left so that the rest of the title can be  
seen.  
1
Touch A.MENU and FUNCTION and then  
touch COMPRESSION.  
If the multi-CD player does not support  
#
COMP/DBE, NO COMP is displayed when you at-  
%
Keep touching DISP until the title be-  
tempt to select it.  
gins to scroll to the left.  
The rest of the title will appear in the display.  
2
Touch  
to select your favorite set-  
ting.  
Touch  
repeatedly to switch between the  
following settings:  
COMP OFFCOMP 1COMP 2ꢄ  
COMP OFFDBE 1DBE 2  
Selecting tracks from the track  
title list  
Track title list lets you see the list of track titles  
on a CD TEXT disc and select one of them to  
play back.  
#
You can also select the desired setting by mov-  
ing the joystick left or right.  
1
Touch A.MENU and FUNCTION and then  
touch TRACK LIST.  
2
Touch  
or  
to switch between the  
lists of titles.  
3
Touch your favorite track title.  
That selection will begin to play.  
57  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Section  
11  
XM tuner  
5 XM channel select setting indicator  
Shows what channel select setting has  
been selected. CH-Number is displayed  
when CHNUMBER is selected, and  
Category is displayed when CATEGORY is  
selected.  
Listening to the XM  
1
2
3
4
5
6 XM channel name  
Shows the channel name of broadcast  
channel.  
1
Touch the source icon and then touch  
XM to select the XM.  
When the source icon is not displayed, you  
can display it by touching the screen.  
6
#
You can use this unit to control a XMsatellite di-  
gital tuner (GEX-P910XM), which is sold  
separately.  
For details concerning operation, refer to the  
XM tuners operation manuals. This section  
provides information on XM operations with  
this unit which differs from that described in  
the XM tuners operation manual.  
2
Touch the screen to display the touch  
panel keys.  
3
Touch BAND to select a XM band.  
Touch BAND repeatedly until the desired XM  
band is displayed, XM1, XM2 or XM3.  
!
This unit does not have the text scroll  
function.  
With this unit, you can operate one addi-  
tional function: XM channel direct  
selection.  
4
To perform manual tuning, briefly  
touch c or d.  
!
The channels move up or down step by step.  
Channels that cannot currently be selected  
are skipped, and the next channel is selected.  
#
To perform seel tuning, keep touching c or d  
for about one second and release.  
You can also perform manual tuning by mov-  
ing the joystick left or right.  
You can also perform tuning from a desired  
1 Source icon  
Shows what the source has been selected.  
#
2 XM band indicator  
Shows the XM band which has been  
selected.  
#
channel category. (Refer to Selecting the channel  
in the channel category on page 60.)  
3 XM preset number indicator  
Shows what XM preset has been selected.  
Notes  
!
!
If you do not use the touch panel keys for 30  
seconds, they will be hidden automatically.  
You can go to the next group of touch panel  
keys by touching d.  
4 XM channel number indicator  
Shows to which XM channel number the  
tuner is tuned.  
58  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Section  
XM tuner  
11  
Introduction of advanced  
XM tuner operation  
Storing and recalling  
broadcast stations  
If you touch any of the preset tuning keys  
P1P6 you can easily store up to six broad-  
cast stations for later recall with the touch of a  
key.  
%
When you find a station that you want  
to store in memory keep touching a preset  
tuning key P1P6 until the XM preset  
number stops flashing.  
The number you have touched will flash in the  
XM preset number indicator and then remain  
lit. The selected station has been stored in  
memory.  
1
1 Function display  
Shows the function names.  
The next time you touch the same preset tun-  
ing key P1P6 the station is recalled from  
memory.  
%
Touch A.MENU and then touch  
FUNCTION to display the function names.  
The function names are displayed and oper-  
able ones are highlighted.  
#
When the touch panel keys are not displayed,  
you can display them by touching the screen.  
When P1P6 are not displayed, you can dis-  
#
When A.MENU is not displayed, you can dis-  
play it by touching the screen.  
You can also display MENU by clicking the  
joystick.  
#
play them by touching d.  
#
Notes  
#
#
To return to the previous display, touch BACK.  
To return to the channel display, touch ESC.  
!
!
Up to 18 stations, six for each of three XM  
bands can be stored in memory.  
You can also use a and b to recall stations  
assigned to preset tuning keys P1P6.  
Note  
If you do not operate the function within about 30  
seconds, the display is automatically returned to  
the channel display.  
Swiching the XM channel  
select setting  
You can switch if you select a channel with a  
channel number or from a channel category  
when you select a channel.  
Switching the XM display  
%
Touch DISP to switch the XM display.  
Each time you touch DISP changes the XM  
display in the following order:  
Channel nameArtist name/featureSong/  
program titleChannel category  
%
Touch MODE to select the desired chan-  
nel select setting.  
Touch MODE repeatedly to switch between  
the following channel select settings:  
59  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Section  
11  
XM tuner  
CHNUMBER (channel number select setting)  
CATEGORY (channel category select  
setting)  
3
While the input number is displayed,  
touch ENTER.  
The entered XM channel is selected.  
Note  
Notes  
You can also perform the same operations using  
CH MODE. To display CH MODE, touch A.MENU  
and then touch FUNCTION.  
!
!
You can also perform the same operations  
using CH INPUT. To display CH INPUT, touch  
A.MENU and then touch FUNCTION.  
You can also perform this operation by press-  
ing DIRECT on the remote control.  
Selecting the channel in the  
channelcategory  
1
Touch MODE to select the channel cate-  
Display the ID code  
gory select setting.  
Touch MODE repeatedly to switch between  
the following channel select settings:  
CHNUMBER (channel number select setting)  
CATEGORY (channel category select  
setting)  
Channelnumber select setting  
If you select CH : 000, the ID code is displayed.  
%
Touch c or d to select CH : 000.  
2
Touch a or b to select the desired chan-  
Channelcategory select setting  
RADIO ID is provided as a channel category  
nel category.  
for displaying the ID code.  
3
Touch c or d to select the desired chan-  
nel in the selected channel category.  
%
Touch a or b to select RADIO ID from  
channel category.  
If you select another channel, display of the ID  
code is canceled.  
Display of the ID code repeats displaying  
RADIO ID and the ID code one after the other.  
#
Selecting the XM channel  
directly  
#
You can select the XM channel directly by en-  
tering the desired channel number.  
1
Touch DIRECT.  
CHANNEL INPUT appears in the display.  
2
Touch 09 to input the desired channel  
number.  
To cancel the input numbers, touch C.  
#
60  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Section  
TV tuner  
12  
3
Touch BAND to select a band.  
Watching the TV tuner  
Touch BAND repeatedly until the desired band  
is displayed, TV1 or TV2.  
1
3
4
2
4
To perform manual tuning, briefly  
touch c or d.  
The channels move up or down step by step.  
#
You can also perform manual tuning by mov-  
ing the joystick left or right.  
5
To perform seek tuning, keep touching  
c or d for about one second and release.  
The tuner will scan the channels until a broad-  
cast strong enough for good reception is  
found.  
5
You can use this unit to control a TV tuner,  
which is sold separately.  
#
You can cancel seek tuning by briefly touching  
either c or d.  
If you keep touching c or d you can skip  
For details concerning operation, refer to the  
TV tuners operation manuals. This section  
provides information on TV operations with  
this unit which differs from that described in  
the TV tuners operation manual.  
#
broadcasting channels. Seek tuning starts as  
soon as you release the keys.  
#
You can also perform seek tuning by holding  
the joystick left or right.  
1 Source icon  
Note  
Shows which source has been selected.  
If you do not use the touch panel keys within 30  
seconds, they will be hidden automatically.  
2 Band indicator  
Shows which band the TV tuner is tuned to.  
3 Preset number indicator  
Shows which preset has been selected.  
4 Channel indicator  
Shows which channel the TV tuner is tuned.  
5 Preset list display  
Shows the preset list.  
1
Touch the source icon and then touch  
TV to select the TV.  
When the source icon is not displayed, you  
can display it by touching the screen.  
#
2
Touch the screen to display the touch  
panel keys.  
61  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Section  
12  
TV tuner  
%
When you find a station that you want  
Introduction of advanced  
TV tuner operation  
to store in memory, keep touching one of  
preset tuning keys P01P12 until the pre-  
set number stops flashing.  
The number you have touched will flash in the  
preset number indicator and then remain lit.  
The selected station has been stored in mem-  
ory.  
The next time you touch the same preset tun-  
ing key the station is recalled from memory.  
#
To switch between P01P06 and P07P12,  
touch or  
When the touch panel keys are not displayed,  
you can display them by touching the screen.  
When P01P06 and P07P12 are not dis-  
.
1
#
1 Function display  
Shows the function names.  
#
played, you can display them by touching DISP.  
%
Touch A.MENU and then touch  
Notes  
FUNCTION to display the function names.  
The function names are displayed and oper-  
able ones are highlighted.  
!
!
Up to 24 stations, 12 for each of two TV bands,  
can be stored in memory.  
You can also use a and b to recall stations  
assigned to preset tuning keys P01P12.  
#
When A.MENU is not displayed, you can dis-  
play it by touching the screen.  
You can also display MENU by clicking the  
joystick.  
#
#
#
To return to the previous display, touch BACK.  
To return to the TV picture, touch ESC.  
Storing the strongest  
broadcast stations  
sequentially  
Note  
If you do not operate the function within about 30  
seconds, the display is automatically returned to  
the TV picture.  
1
Touch A.MENU and FUNCTION and then  
touch BSSM.  
2
Touch a to turn BSSM on.  
BSSM begins to flash. While BSSM is flashing  
the 12 strongest broadcast stations will be  
stored in order from the lowest channel up.  
When finished, BSSM disappears.  
Storing and recalling  
broadcast stations  
If you touch any of the preset tuning keys  
P01P12 you can easily store up to 12 broad-  
cast stations for later recall with the touch of a  
key.  
#
To cancel the storage process, touch b.  
Note  
Storing broadcast stations with BSSM may re-  
place broadcast stations you have saved using  
P01P12.  
62  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Section  
DVD Player  
13  
6 Play time indicator  
Shows the elapsed playing time of the cur-  
rent chapter/track.  
Playing a disc  
1
3
5 6  
2
4
1
Touch the source icon and then touch  
S-DVD to select the DVD player.  
When the source icon is not displayed, you  
can display it by touching the screen.  
#
2
Touch the screen to display the touch  
panel keys.  
3
To skip back or forward to another  
You can use this unit to control a DVD player or  
multi-DVD player, which is sold separately.  
For details concerning operation, refer to the  
DVD players or multi-DVD players operation  
manual. This section provides information on  
DVD operations with this unit which differs  
from that described in the DVD players or  
multi-DVD players operation manual.  
chapter/track, briefly touch c or d.  
#
chapter/track by moving the joystick left or right.  
When using the joystick on the remote control,  
switch the remote control operation mode to  
AVH. (Refer to page 19.)  
You can also skip back or forward to another  
4
To perform fast forward or reverse,  
!
Switch the remote control selection to sui-  
table setting to operate DVD players. (Refer  
keep touching c or d for about one second  
and release.  
#
by holding the joystick left or right.  
When using the joystick on the remote control,  
switch the remote control operation mode to  
AVH. (Refer to page 19.)  
You can also perform fast reverse/fast forward  
!
Switch the remote control operation mode  
to DVD to operate the DVD player by using  
remote control. (Refer to page 19.)  
1 Source icon  
Shows which source has been selected.  
Note  
2 Disc type indicator  
Shows the type of the currently playing disc.  
If you do not use the touch panel keys within 30  
seconds, they will be hidden automatically.  
3 Disc number indicator  
Shows the disc currently playing when  
using a multi-DVD player.  
Turning the DVD player on  
or off  
4 Title number indicator  
Shows the title currently playing during  
DVD video playback.  
!
Only the remote control can operate this  
function. To perform this function, switch  
the remote control operation mode to DVD.  
(Refer to page 19.)  
5 Chapter/track number indicator  
Shows the chapter/track currently playing.  
63  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Section  
13  
DVD Player  
%
on.  
#
Press REAR.S to turn the DVD player  
Introduction of advanced  
DVD player operation  
To turn the DVD player off, press REAR.S  
again.  
Selecting a disc  
!
You can operate this function only when a  
multi-DVD player is connected to this unit.  
%
#
Touch a or b to select a disc.  
You can also skip back or forward to another  
1
disc by moving the joystick up or down.  
When using the joystick on the remote control,  
switch the remote control operation mode to  
AVH. (Refer to page 19.)  
1 Function display  
Shows the function names.  
%
Touch A.MENU and then touch  
#
You can also select a disc by pressing BACK  
FUNCTION to display the function names.  
The function names are displayed and oper-  
able ones are highlighted.  
or ENTERTAINMENT on the remote control when  
the remote control operation mode is switched to  
DVD.  
#
When A.MENU is not displayed, you can dis-  
play it by touching the screen.  
You can also display MENU by clicking the  
joystick.  
#
#
To go to the next group of function names,  
touch NEXT.  
#
To return to the previous group of function  
names, touch PREV.  
#
#
To return to the previous display, touch BACK.  
To return to the playback display, touch ESC.  
Note  
If you do not operate the function within about 30  
seconds, the display is automatically returned to  
the playback display.  
Repeating play  
!
During playback of Video CDs featuring  
PBC (playback control), this function can-  
not be operated.  
64  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Section  
DVD Player  
13  
1
Touch A.MENU and FUNCTION and then  
Scanning tracks of a CD  
touch REPEAT.  
!
You can operate this function only during  
CD playback.  
2
Touch  
to select the repeat range.  
During DVD video playback  
1
Touch A.MENU and FUNCTION and then  
!
!
!
TITLE Repeat just the current title  
CHAPTER Repeat just the current chapter  
DISC Repeat the current disc  
touch SCAN.  
2
Touch a to turn scan play on.  
During Video CD or CD playback  
The first 10 seconds of each track is played.  
!
!
TRACK Repeat just the current track  
DISC Repeat the current disc  
3
When you find the desired track touch  
b to turn scan play off.  
Notes  
!
!
If you select other discs during repeat play,  
the repeat play range changes to DISC.  
If you perform track search or fast forward/re-  
verse during TRACK, the repeat play range  
changes to DISC.  
Using ITS playlists  
!
You can operate these functions only when  
a multi-DVD player is connected to this  
unit.  
!
This function differs slightly from ITS play-  
back with a multi-CD player. With multi-  
DVD player, ITS playback applies only to the  
CD playing. For details, refer to Using ITS  
Pausing disc playback  
1
Touch A.MENU and FUNCTION and then  
touch PAUSE.  
2
#
Touch a to turn pause on.  
To turn pause off, touch b.  
Using disc title functions  
You can input CD titles and display the titles.  
Then you can easily search for and play a de-  
sired disc.  
Playing tracks in a random  
order  
!
You can operate this function only during  
CD playback.  
Entering disc titles  
Disc title input lets you input CD titles up to 10  
letters long into the multi-DVD player. For de-  
tails concerning operation, refer to Using disc  
1
Touch A.MENU and FUNCTION and then  
touch RANDOM.  
!
You can operate this function only when a  
multi-DVD player is connected to this  
unit.  
2
Touch a to turn random play on.  
Tracks will play in a random order.  
To turn random play off, touch b.  
#
65  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Section  
14  
Audio Adjustments  
#
When selecting the FM tuner as the source,  
Introduction of audio  
adjustments  
you cannot switch to SLA.  
#
#
To return to the previous display, touch BACK.  
To return to the display of each source, touch  
ESC.  
Note  
If you do not operate the audio function within  
about 30 seconds, the display is automatically re-  
turned to the source display.  
1
1 Audio display  
Shows the audio function names.  
Using balance adjustment  
You can select a fader/balance setting that  
provides an ideal listening environment in all  
occupied seats.  
Important  
If the multi-channel processor (DEQ-P8000) is  
connected to this unit, the audio function will be  
changed into the multi-channel processors  
audio menu. For details, refer to Introduction of  
1
Touch A.MENU and AUDIO and then  
touch FADER/BALANCE.  
When the rear output setting is SUB. W,  
#
BALANCE will be displayed instead of  
FADER/BALANCE. Refer to Setting the rear out-  
%
Touch A.MENU and then touch AUDIO  
to display the audio function names.  
The audio function names are displayed and  
operable ones are highlighted.  
2
Touch a or b to adjust front/rear  
speaker balance.  
Each time you touch a or b it moves the  
front/rear speaker balance towards the front or  
the rear.  
FRONT:15 REAR:15 is displayed as the front/  
rear speaker balance moves from front to rear.  
#
When A.MENU is not displayed, you can dis-  
play it by touching the screen.  
You can also display MENU by clicking the  
joystick.  
#
#
To go to the next group of function names,  
#
FR:00 is the proper setting when only two  
speakers are used.  
When the rear output setting is SUB. W, you  
touch NEXT.  
#
To return to the previous group of function  
#
names, touch PREV.  
cannot adjust front/rear speaker balance. Refer to  
#
If EQ-EX function has been selected and only  
when EQ-EX is turned on and CUSTOM is se-  
lected as the equalizer curve, you can switch to  
BASS and TREBLE.  
#
Only when the subwoofer controller setting is  
FULL, NON FADING will be displayed instead of  
SUB WOOFER. (Refer to Setting the rear output  
66  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Section  
Audio Adjustments  
14  
3
Touch c or d to adjust left/right speak-  
%
Press EQ to select the equalizer.  
er balance.  
Press EQ repeatedly to switch between the fol-  
lowing equalizers:  
SUPER BASSPOWERFULNATURALꢄ  
VOCALCUSTOMFLAT  
Each time you touch c or d it moves the left/  
right speaker balance towards the left or the  
right.  
LEFT:09 RIGHT:09 is displayed as the left/  
right speaker balance moves from left to  
right.  
Adjusting equalizer curves  
You can adjust the currently selected equalizer  
curve setting as desired. Adjusted equalizer  
curve settings are memorized in CUSTOM.  
Using the equalizer  
The equalizer lets you adjust the equalization  
to match car interior acoustic characteristics  
as desired.  
!
You can adjust the center frequency and  
the Q factor (curve characteristics) of each  
currently selected curve band (LOW/MID/  
HIGH).  
Level (dB)  
Recalling equalizer curves  
Q=2W  
Q=2N  
There are six stored equalizer curves which  
you can easily recall at any time. Here is a list  
of the equalizer curves:  
Center frequency  
Frequency (Hz)  
Display  
Equalizer curve  
1
Touch A.MENU and AUDIO and then  
SUPER BASS Super bass  
touch EQ MENU.  
POWERFUL  
NATURAL  
VOCAL  
Powerful  
Natural  
Vocal  
2
Touch  
or  
to select the desired  
or selects the item  
item.  
Each time you touch  
in the following order:  
BAND (bands)LEVEL (equalizer level)  
FREQUENCY (center frequency)  
Q. FACTOR (Q factor)  
CUSTOM  
FLAT  
Custom  
Flat  
!
!
CUSTOM is an adjusted equalizer curve  
that you create.  
A separate CUSTOM curve can be created  
for each source. If you make adjustments,  
the equalizer curve settings will be memor-  
ized in CUSTOM.  
3
Touch  
or  
to select the equalizer  
band to adjust.  
Each time you touch  
bands in the following order:  
LOW (low)MID (mid)HIGH (high)  
or selects equalizer  
!
When FLAT is selected no supplement or  
correction is made to the sound. This is  
useful to check the effect of the equalizer  
curves by switching alternatively between  
FLAT and a set equalizer curve.  
4
Touch  
just the level of the equalizer band.  
Each time you touch or increases or de-  
creases the level of the equalization band.  
and then touch  
or  
to ad-  
67  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Section  
14  
Audio Adjustments  
+6 6 is displayed as the level is increased  
1
Touch A.MENU and AUDIO and then  
or decreased.  
touch BASS.  
5
Touch  
lect the desired frequency.  
Touch or until the desired frequency ap-  
and then touch  
or  
to se-  
2
Touch  
or  
to select the desired fre-  
quency.  
Touch  
or until the desired frequency ap-  
pears in the display.  
pears in the display.  
Low: 40Hz80Hz100Hz160Hz  
Mid: 200Hz500Hz1kHz2kHz  
High: 3.15kHz8kHz10kHz12.5kHz  
40Hz63Hz100Hz160Hz  
3
Touch  
or  
to adjust the bass level.  
or increases or de-  
Each time you touch  
6
Touch  
lect the desired Q factor.  
Touch or until the desired Q factor ap-  
and then touch  
or  
to se-  
creases the bass level. +6 6 is displayed as  
the level is increased or decreased.  
pears in the display.  
2W1W1N2N  
Adjusting treble  
You can adjust the cut-off frequency and the  
treble level.  
Note  
!
If SFEQ has been set to FRONT1 or  
FRONT2, treble adjustment affects only the  
front output: rear output cannot be ad-  
justed. (Refer to Setting the sound focus  
If you make adjustments, CUSTOM curve is up-  
dated.  
Adjusting bass and treble  
You can adjust bass and treble settings.  
1
Touch A.MENU and AUDIO and then  
touch TREBLE.  
Touch or  
until the desired frequency ap-  
!
If EQ-EX function has been selected and  
only when EQ-EX is turned on and  
CUSTOM is selected as the equalizer  
curve, you can adjust bass and treble set-  
2
to select the desired fre-  
quency.  
Touch  
or  
pears in the display.  
2.5kHz4kHz6.3kHz10kHz  
3
Touch  
level.  
Each time you touch  
or  
to adjust the treble  
Adjusting bass  
or increases or de-  
You can adjust the cut-off frequency and the  
bass level.  
creases the treble level. +6 6 is displayed as  
the level is increased or decreased.  
!
If SFEQ has been set to FRONT1, bass ad-  
justment affects only the rear output: front  
output cannot be adjusted. (Refer to Setting  
Adjusting loudness  
Loudness compensates for deficiencies in the  
low- and high-sound ranges at low volume.  
68  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Section  
Audio Adjustments  
14  
1
Touch A.MENU and AUDIO and then  
5
Touch  
and then touch  
or  
to se-  
touch LOUDNESS.  
lect cut-off frequency.  
Each time you touch  
or  
selects cut-off  
2
#
Touch  
To turn loudness off, touch  
to turn loudness on.  
frequencies in the following order:  
50Hz80Hz125Hz  
.
Only frequencies lower than those in the se-  
lected range are outputted from the sub-  
woofer.  
3
Touch  
or  
to select a desired level.  
or selects level in  
Each time you touch  
the following order:  
LOW (low)MID (mid)HIGH (high)  
Using nonfading output  
When the nonfading output setting is on, the  
audio signal does not pass through this units  
low pass filter (for the subwoofer), but is out-  
putted through the RCA output.  
Using subwoofer output  
This unit is equipped with a subwoofer output  
which can be turned on or off.  
!
When the subwoofer output is on, you can  
adjust the cut-off frequency and the output  
level of the subwoofer.  
1
Touch A.MENU and AUDIO and then  
touch NON FADING.  
When the subwoofer controller setting is only  
#
1
Touch A.MENU and AUDIO and then  
FULL, you can select NON FADING. (Refer to  
touch SUB WOOFER.  
When the subwoofer controller setting is  
FULL, you cannot select SUB WOOFER.  
#
2
Touch  
to turn non fading output on.  
#
To turn non fading output off, touch  
.
2
Touch  
to turn subwoofer output on.  
#
To turn subwoofer output off, touch  
.
3
Touch  
or  
to adjust the output  
level of the non fading.  
Each time you touch or  
3
Touch  
and then touch  
or  
to se-  
increases or de-  
lect the phase of subwoofer output.  
Touch to select normal phase and  
NORMAL appears in the display. Touch  
creases the level of the non fading. +6 6 is  
displayed as the level is increased or  
decreased.  
to  
select reverse phase and REVERSE appears in  
the display.  
4
Touch  
just the output level of the subwoofer.  
Each time you touch or increases or de-  
and then touch  
or  
to ad-  
Using the high pass filter  
When you do not want low sounds from the  
subwoofer output frequency range to play  
from the front or rear speakers, turn on the  
HPF (high pass filter). Only frequencies higher  
than those in the selected range are outputted  
from the front or rear speakers.  
creases the level of the subwoofer. +6 6 is  
displayed as the level is increased or de-  
creased.  
69  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Section  
14  
Audio Adjustments  
1
Touch A.MENU and AUDIO and then  
4
Touch a or b to adjust the source vo-  
touch NEXT.  
lume.  
Each time you touch a or b it increases or de-  
creases the source volume.  
+4 4 is displayed as the source volume is  
increased or decreased.  
2
Touch HPF.  
3
Touch  
to turn high pass filter on.  
#
To turn high pass filter off, touch  
.
Notes  
4
Touch  
or  
to select cut-off fre-  
!
!
!
The AM tuner volume level can also be ad-  
justed with source level adjustments.  
Video CD, CD and MP3 are set to the same  
source level adjustment volume automatically.  
DVD and the optional DVD player are set to  
the same source level adjustment volume  
automatically.  
quency.  
Each time you touch  
frequencies in the following order:  
or  
selects cut-off  
50Hz80Hz125Hz  
Note  
If you switch the SFEQ setting, the HPF function  
is automatically turned off. By turning the HPF  
function on after selecting the SFEQ setting, you  
can combine HPF function with SFEQ  
function.  
!
!
External unit 1 and external unit 2 are set to  
the same source level adjustment volume  
automatically.  
AUX (auxiliary input) and AV (video input) are  
set to the same source level adjustment vo-  
lume automatically.  
Adjusting source levels  
Compensating for  
equalizer curves (EQ-EX)  
The EQ-EX function smoothes the effects of  
each equalizer curve. Furthermore, you can  
adjust bass and treble for each source when  
CUSTOM curve is selected.  
SLA (source level adjustment) lets you adjust  
the volume level of each source to prevent ra-  
dical changes in volume when switching be-  
tween sources.  
!
Settings are based on the FM tuner volume  
level, which remains unchanged.  
!
You cannot use EQ-EX function and SFEQ  
function simultaneously.  
1
Compare the FM tuner volume level  
with the level of the source you wish to ad-  
just.  
1
Touch A.MENU and AUDIO and then  
touch NEXT.  
2
Touch A.MENU and AUDIO and then  
touch NEXT.  
2
Touch SFEQ/EQ-EX and then touch  
EQ-EX.  
3
Touch SLA.  
3
#
Touch a to turn EQ-EX on.  
To turn EQ-EX off, touch b.  
70  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Section  
Audio Adjustments  
14  
!
If you switch the SFEQ setting, the HPF func-  
tion is automatically turned off. By turning the  
HPF function on after selecting the SFEQ set-  
ting, you can combine HPF function with  
SFEQ function.  
Setting the sound focus  
equalizer (SFEQ)  
Clarifying the sound image of vocals and in-  
struments allows the simple staging of a nat-  
ural, pleasant sound environment. Even  
greater listening enjoyment will be obtained if  
seating positions are chosen carefully.  
FRONT1 boosts the treble on the front output  
and the bass on the rear output. FRONT2  
boosts the treble and the bass on the front out-  
put and the bass on the rear output. (The bass  
boost is the same for both front and rear.) For  
both FRONT1 and FRONT2, H setting provides  
a more pronounced effect than L setting.  
!
You cannot use EQ-EX function and SFEQ  
function simultaneously.  
1
Touch A.MENU and AUDIO and then  
touch NEXT.  
2
Touch SFEQ/EQ-EX and then touch  
SFEQ.  
3
Touch  
SFEQ setting.  
Touch or  
or  
to select the desired  
repeatedly to switch between  
the following settings:  
OFF (off)FRONT1-H (front 1-high)  
FRONT1-L (front 1-low)FRONT2-H (front  
2-high)FRONT2-L (front 2-low)CUSTOM  
(custom)  
4
Touch  
or  
to select the desired po-  
sition.  
Touch  
or until the desired position ap-  
pears in the display.  
LEFT (left)CENTER (center)RIGHT (right)  
Notes  
!
If you adjust the bass or treble, CUSTOM  
memorizes an SFEQ setting in which the bass  
and treble are adjusted for personal prefer-  
ence.  
71  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Section  
15  
DigitalSignalProcessor  
#
To go to the next group of function names,  
Introduction of DSP  
adjustments  
touch NEXT.  
#
To return to the previous group of function  
names, touch PREV.  
#
When playing discs recorded with more than  
96 kHz sampling frequency, you cannot use audio  
functions. Also, equalizer curve setting,  
POSITION, AUTO EQ and AUTO TA will be can-  
celled.  
#
When playing discs recorded with more than  
96 kHz sampling frequency, audio is outputted  
from front speaker only.  
1
#
When selecting the FM tuner as the source,  
you cannot switch to SLA.  
When playing other than the DVD disc, you  
cannot switch to D.R.C.  
When neither FRONT-L nor FRONT-R is se-  
You can use this unit to control multi-channel  
processor (e.g. DEQ-P8000), which is sold sepa-  
rately.  
#
#
!
Some functions may differ depending on the  
multi-channel processor connected to this  
unit.  
lected in POSITION, you cannot switch to  
TIME ALIGNMENT.  
#
#
To return to the previous display, touch BACK.  
To return to the display of each source, touch  
By carrying out the following settings/adjust-  
ments in the order shown, you can create a fi-  
nely-tuned sound field effortlessly.  
ESC.  
1
2
3
Note  
Adjusting the time alignment  
If you do not operate the DSP function within  
about 30 seconds, the display is automatically re-  
turned to the source display.  
4
5
6
7
8
Adjusting 3-band parametric equalizer  
Using the sound field control  
The SFC function creates the sensation of a  
live performance.  
1 DSP display  
Shows the DSP function names.  
!
The acoustics of different performance en-  
vironments are not the same and depend  
on the extent and contour of space through  
which sound waves move and on how  
sounds bounce off the stage, walls, floors  
and ceilings. At a live performance you  
hear music in three stages: direct sound,  
early reflections, and late reflections, or re-  
verberations. Those factors are programed  
%
Touch A.MENU and then touch DSP to  
display the DSP function names.  
The DSP function names are displayed and  
operable ones are highlighted.  
#
When A.MENU is not displayed, you can dis-  
play it by touching the screen.  
You can also display MENU by clicking the  
#
joystick.  
72  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Section  
DigitalSignalProcessor  
15  
into the SFC circuitry to recreate the acous-  
tics of various performance settings.  
1
Touch A.MENU and DSP and then touch  
POSITION.  
1
Press EQ and hold to switch to SFC  
2
Touch c/d/a/b to select a listening po-  
function.  
sition.  
Press EQ and hold until SFC appears in the  
display.  
Touch one of these, c/d/a/b, to select a lis-  
tening position as listed in the table.  
#
To switch to equalizer function, press EQ and  
Key  
c
Display  
FRONT-L  
FRONT-R  
FRONT  
ALL  
Position  
hold again.  
Front seat left  
Front seat right  
Front seats  
All seats  
2
Press EQ to select the desired SFC  
d
mode.  
a
Press EQ repeatedly to switch between the fol-  
lowing mode:  
b
MUSICAL (musical)DRAMA (drama)  
ACTION (action)JAZZ (jazz)HALL (hall)  
CLUB (club)OFF (off)  
#
To cancel the selected listening position,  
touch the same key again.  
Note  
Note  
When you make adjustments for listening posi-  
tion, the speakers are automatically set for appro-  
priate output levels. You can tailor them if you  
want as discussed under the heading of Adjust-  
If the source is a 2-channel LPCM audio or a 2-  
channel Dolby Digital audio and you select SFC  
effects that are most applicable for 5.1-channel  
audio (i.e., MUSICAL, DRAMA or ACTION), we  
recommend turning Dolby Pro Logic on. On the  
other hand, when selecting SFC effects that are  
intended for use with 2-channel audio (i.e., JAZZ,  
HALL or CLUB), we recommend turning Dolby  
Pro Logic off.  
Using balance adjustment  
You can select a fader/balance setting that  
provides an ideal listening environment in all  
occupied seats.  
Using the position selector  
One way to assure a more natural sound is to  
accurately position the stereo image, putting  
you right in the center of the sound field. The  
position selector function lets you automati-  
cally adjust the speaker output levels and in-  
serts a delay time to match the number and  
position of occupied seats. When used in con-  
junction with the SFC, the feature will make  
the sound image more natural and offer a pa-  
noramic sound that envelops you.  
1
Touch A.MENU and DSP and then touch  
FADER/BALANCE.  
2
Touch a or b to adjust front/rear  
speaker balance.  
Each time you touch a or b it moves the  
front/rear speaker balance towards the front or  
the rear.  
FRONT:25 REAR:25 is displayed as the front/  
rear speaker balance moves from front to rear.  
73  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Section  
15  
DigitalSignalProcessor  
#
FR:00 is the proper setting when only two  
!
!
!
DVD and the optional DVD player are set to  
the same source level adjustment volume  
automatically.  
External unit 1 and external unit 2 are set to  
the same source level adjustment volume  
automatically.  
AUX (auxiliary input) and AV (video input) are  
set to the same source level adjustment vo-  
lume automatically.  
speakers are used.  
3
Touch c or d to adjust left/right speak-  
er balance.  
Each time you touch c or d it moves the left/  
right speaker balance towards the left or the  
right.  
LEFT:25 RIGHT:25 is displayed as the left/  
right speaker balance moves from left to  
right.  
Using the dynamic range  
control  
The dynamic range refers to the difference be-  
tween the largest and softest sounds. The dy-  
namic range control compresses this  
difference so that you can clearly hear sounds  
even at low volume levels.  
Adjusting source levels  
SLA (source level adjustment) lets you adjust  
the volume level of each source to prevent ra-  
dical changes in volume when switching be-  
tween sources.  
!
Settings are based on the FM tuner volume  
level, which remains unchanged.  
!
The dynamic range control is effective only  
on Dolby Digital sounds.  
1
Compare the FM tuner volume level  
1
Touch A.MENU and DSP and then touch  
with the level of the source you wish to ad-  
just.  
D.R.C.  
#
When playing other than the DVD disc, you  
cannot switch this mode.  
2
Touch A.MENU and DSP and then touch  
SLA.  
2
Touch a to turn the dynamic range con-  
trol on.  
3
Touch a or b to adjust the source vo-  
#
To turn dynamic range control off, touch b.  
lume.  
Each time you touch a or b it increases or de-  
creases the source volume.  
+4 4 is displayed as the source volume is  
increased or decreased.  
Using the down-mix function  
Only when the multi-channel processor (e.g.,  
DEQ-P8000) is connected to this unit, you can  
operate this function.  
The down-mix function allows you to play back  
multi-channel audio in 2 channels.  
Notes  
!
!
The AM tuner volume level can also be ad-  
justed with source level adjustments.  
Video CD, CD and MP3/WMA are set to the  
same source level adjustment volume auto-  
matically.  
1
Touch A.MENU and DSP and then touch  
DOWN MIX.  
74  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Section  
DigitalSignalProcessor  
15  
2
Touch either of the following touch  
3
Touch any of the following touch panel  
panel keys to select the desired setting.  
keys to select the desired mode.  
!
Lt/Rt Down mix so that the surround  
components can be restored (decoded).  
Lo/Ro Stereo mix the original audio that  
do not contain channel modes such as sur-  
round components.  
!
!
!
MOVIE The Movie mode suitable for  
movie playback  
MUSIC The Music mode suitable for  
music playback  
MATRIX The Matrix mode for when FM  
radio reception is weak  
!
!
!
OFF Turn Dolby Pro Logic B off  
MUSIC ADJUST Adjust the Music mode  
#
You can operate MUSIC ADJUST only when  
Using the direct control  
You can override audio settings to check for ef-  
MUSIC has been selected.  
fectiveness of your audio settings.  
!
All audio functions are locked out when the  
direct control is on except VOLUME.  
Adjusting the Music mode  
You can adjust the Music mode with the fol-  
lowing three controls.  
1
Touch A.MENU and DSP and then touch  
!
Panorama (PANORAMA) extends the front  
stereo image to include the surround  
speakers for an exciting wraparoundef-  
fect.  
DIGITAL DIRECT.  
2
#
Touch a to turn the direct control on.  
To turn direct control off, touch b.  
!
!
Dimension (DIMENSION) allows you to  
gradually adjust the sound field either to-  
wards the front or the rear.  
Center Width (CENTER WIDTH) allows cen-  
ter-channel sounds to be positioned be-  
tween the center speaker and the left/right  
speakers. It improves the left-center-right  
stage presentation for both the driver and  
the front passenger.  
Using the Dolby Pro Logic B  
Only when the multi-channel processor (e.g.,  
DEQ-P8000) is connected to this unit, you can  
operate this function.  
Dolby Pro Logic B creates five full-bandwidth  
output channels from two-channel sources to  
achieve high-purity matrix surround.  
1
Touch A.MENU and DSP and then touch  
!
Dolby Pro Logic B supports up to 48kHz  
sampling rate stereo source and has no ef-  
fect on other types of source.  
NEXT.  
2
3
Touch DOLBY PRO LOGIC B.  
Touch MUSIC and then touch  
1
Touch A.MENU and DSP and then touch  
NEXT.  
MUSIC ADJUST.  
You can operate MUSIC ADJUST only when  
#
2
Touch DOLBY PRO LOGIC B.  
MUSIC has been selected.  
75  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Section  
15  
DigitalSignalProcessor  
4
Touch  
or  
to select PANORAMA  
or selects the item  
!
Set the front or rear speaker to LARGE if  
the speaker is capable of reproducing bass  
content, or if no subwoofer is installed.  
(panorama).  
Each time you touch  
in the following order:  
PANORAMA (panorama)DIMENSION (di-  
1
Touch A.MENU and DSP and then touch  
mension)CENTER WIDTH (center width)  
NEXT.  
5
on.  
#
Touch  
to turn the panorama control  
2
Touch SPEAKER SETTING.  
Touch or to select the speaker to  
To turn the panorama control off, touch  
.
3
be adjusted.  
Each time you touch  
speaker in the following order:  
FRONT (front speakers)CENTER (center  
speaker)REAR (rear speakers)  
SUB WOOFER (subwoofer)PHASE (sub-  
woofer setting)  
6
Touch and then touch or  
to ad-  
or  
selects the  
just front/surround speaker balance.  
Each time you touch or it moves the  
sound towards the front or the surrounds.  
+3 3 is displayed as the front/surround  
speaker balance moves from front to sur-  
rounds.  
#
You can switch to PHASE only when the sub-  
woofer has been set to ON.  
7
Touch  
and then touch  
or  
to ad-  
just the center image.  
4
Touch  
or  
to select the correct size  
Each time you touch  
or  
it gradually  
for the selected speaker.  
spreads the center channel sound into the  
front left and right speakers over a range 07.  
3 is the default and its recommended for  
most recordings. 0 places all center sound in  
the center speaker. 7 places all center sound  
equally in the left/right speakers.  
Each time you touch  
in the following order:  
or  
selects the size  
OFF (off)SMALL (small)LARGE (large)  
You cannot select OFF, when FRONT (front  
speakers) have been selected.  
You can select ON or OFF, when  
SUB WOOFER (subwoofer) has been selected.  
You can switch REVERSE (reverse phase) or  
#
#
#
NORMAL (normal phase), when PHASE (subwoo-  
fer setting) has been selected.  
Setting the speaker setting  
You need to make with/without (or yes/no) and  
size (bass reproducing capacity) selection/ad-  
justments depending on the installed speak-  
ers. The size needs to be set to LARGE (large)  
if the speaker is capable of reproducing  
sounds of about 100 Hz or below. Otherwise  
select SMALL (small).  
Correcting the subwoofers phase  
If trying to boost the bass output of the sub-  
woofer doesnt do much or rather makes you  
feel that the bass gets more murky, this may  
indicate that the subwoofers output and bass  
content you hear over other speakers cancel  
each other out. To remove this problem, try  
changing the phase setting for the subwoofer.  
!
Low frequency range is not output if the  
subwoofer is set to OFF and the front and  
rear speakers set to SMALL or OFF.  
It is imperative that non-installed speakers  
be set to OFF.  
!
76  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Section  
DigitalSignalProcessor  
15  
1
Touch A.MENU and DSP and then touch  
duced through a LARGE speaker or subwoo-  
NEXT.  
fer.  
2
Touch SPEAKER SETTING.  
Touch or to select SUB WOOFER  
1
Touch A.MENU and DSP and then touch  
NEXT.  
3
(subwoofer).  
Each time you touch  
speaker in the following order:  
2
3
Touch CROSS OVER.  
Touch or to select the speaker to  
or  
selects the  
FRONT (front speakers)CENTER (center  
speaker)REAR (rear speakers)  
SUB WOOFER (subwoofer)PHASE (sub-  
woofer setting)  
be adjusted.  
Each time you touch  
speaker in the following order:  
FRONT (front speakers)CENTER (center  
speaker)REAR (rear speakers)  
SUB WOOFER (subwoofer)  
or  
selects the  
4
Touch  
to turn subwoofer output on.  
#
To turn subwoofer output off, touch  
.
4
Touch  
quency.  
Each time you touch  
or  
to select cut-off fre-  
5
Touch  
and then touch  
or  
to se-  
lect the phase of subwoofer output.  
Touch to select normal phase and  
NORMAL appears in the display. Touch  
or selects cut-off  
frequencies in the following order:  
6380100125160200 (Hz)  
to  
select reverse phase and REVERSE appears in  
the display.  
Note  
Selecting a cut-off frequency is to set a cut-off fre-  
quency of the subwoofers L.P.F. (low-pass filter)  
and that of the SMALL speaker H.P.F. (high-pass  
filter). The cut-off frequency setting has no effect  
if the subwoofer is set to OFF and other speakers  
are set to LARGE or OFF.  
Note  
When playing a 2-channel mono source with Pro  
Logic turned on, there may be occasions when  
the following will occur:  
!
No audio is output if the center speaker set-  
ting is SMALL or LARGE and no center speak-  
er is installed.  
!
Audio is heard only over the center speaker if  
installed and the center speaker setting is  
SMALL or LARGE.  
Adjusting the speaker  
output levels  
You can readjust the speaker output levels  
using a test tone while listening to music.  
Selecting a cut-off frequency  
1
Touch A.MENU and DSP and then touch  
You can select a frequency, under which  
sounds are reproduced through the subwoo-  
fer. If the installed speakers include one whose  
size has been set to SMALL, you can select a  
frequency, under which sounds are repro-  
NEXT.  
2
Touch SPEAKER LEVEL.  
77  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Section  
15  
DigitalSignalProcessor  
3
Touch  
be adjusted.  
Each time you touch  
speaker in the following order:  
or  
to select the speaker to  
FRONT-L (front speaker left)CENTER (center  
speaker)FRONT-R (front speaker right)  
REAR-R (rear speaker right)REAR-L (rear  
speaker left)SUB WOOFER (subwoofer)  
Check each speaker output level. If no adjust-  
ments are needed, perform step 5 to stop the  
test tone.  
or  
selects the  
FRONT-L (front speaker left)CENTER (center  
speaker)FRONT-R (front speaker right)  
REAR-R (rear speaker right)REAR-L (rear  
speaker left)SUB WOOFER (subwoofer)  
#
You can also start the test tone output by mov-  
ing the joystick up.  
The settings do not appear for speakers  
whose size is set OFF.  
#
You cannot select speakers whose size is set  
at OFF.  
#
4
Touch  
or  
to adjust the speaker  
or increases or de-  
output level.  
Each time you touch  
4
Touch  
output level.  
Each time you touch  
or  
to adjust the speaker  
creases the speaker output level. +10 10 is  
displayed as the level is increased or de-  
creased.  
or increases or de-  
creases the speaker output level. +10 10 is  
displayed as the level is increased or de-  
creased.  
#
The test tone rotates to the next speaker after  
Note  
about two seconds from the last operation.  
To adjust the speaker output levels in this mode is  
the same as making the speaker output levels at  
TEST TONE. Both provide the same results.  
5
put.  
Touch STOP to stop the test tone out-  
#
You can also stop the test tone output by mov-  
ing the joystick down.  
Adjusting the speaker output  
levels using a test tone  
A convenient test tone allows you to easily get  
the overall balance right among the speakers.  
Notes  
!
!
If needed, select speakers and adjust their ab-  
soluteoutput levels. (Refer to Adjusting the  
To adjust the speaker output levels in this  
mode is the same as making the speaker out-  
put levels at SPEAKER LEVEL. Both provide  
the same results.  
1
Touch A.MENU and DSP and then touch  
NEXT.  
2
3
Touch TEST TONE.  
Touch START to start the test tone out-  
put.  
Using the time alignment  
Only when the multi-channel processor (e.g.,  
DEQ-P8000) is connected to this unit, you can  
operate this function.  
The test tone is outputted. It rotates from  
speaker to speaker in the following sequence  
at intervals of about two seconds. The current  
settings for the speaker over which you hear  
the test tone are shown in the display.  
78  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Section  
DigitalSignalProcessor  
15  
The time alignment lets you adjust the dis-  
tance between each speaker and the listening  
position.  
3
#
Touch the speaker to be adjusted.  
You cannot select speakers whose size is set  
at OFF.  
1
Touch A.MENU and DSP and then touch  
4
Touch a or b to adjust the distance be-  
NEXT.  
tween the selected speaker and the listen-  
ing position.  
2
3
Touch TIME ALIGNMENT.  
Touch any of the following touch panel  
Each time you touch a or b increases or de-  
creases the distance. 0.0in. 200.0in. is dis-  
played as the distance is increased or  
decreased.  
keys to select the time alignment.  
!
INITIAL Initial time alignment (factory set-  
ting)  
5
Touch ESC to return to the playback dis-  
!
AUTO TA Time alignment created by auto  
TA and EQ. (Refer to Auto TA and EQ (auto-  
play.  
!
CUSTOM Adjusted time alignment that  
you can create for yourself  
OFF Turn the time alignment off  
ADJUSTMENT Adjust the time alignment  
as desired  
Using the equalizer  
The equalizer lets you adjust the equalization  
to match car interior acoustic characteristics  
as desired.  
!
!
#
You cannot select AUTO TA if auto TA and EQ  
has not been carried out.  
You cannot select ADJUSTMENT when  
Recalling equalizer curves  
#
neither FRONT-L nor FRONT-R is selected in  
POSITION.  
There are seven stored equalizer curves which  
you can easily recall at any time. Here is a list  
of the equalizer curves:  
Display  
Equalizer curve  
Super bass  
Powerful  
Natural  
Adjusting the time alignment  
You can adjust the distance between each  
speaker and the selected position.  
SUPER BASS  
POWERFUL  
NATURAL  
VOCAL  
!
An adjusted time alignment is memorized  
in CUSTOM.  
Vocal  
1
Touch A.MENU and DSP and then touch  
FLAT  
Flat  
NEXT.  
CUSTOM1  
CUSTOM2  
Custom 1  
Custom 2  
2
Touch TIME ALIGNMENT and then  
touch ADJUSTMENT.  
!
CUSTOM1 and CUSTOM2 are adjusted  
equalizer curves.  
#
You cannot select ADJUSTMENT when  
neither FRONT-L nor FRONT-R is selected in  
POSITION.  
79  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Section  
15  
DigitalSignalProcessor  
!
When FLAT is selected no supplement or  
correction is made to the sound. This is  
useful to check the effect of the equalizer  
curves by switching alternatively between  
FLAT and a set equalizer curve.  
2
3
Touch PARAMETRIC EQ.  
Touch or to select the desired  
or selects the item  
item.  
Each time you touch  
in the following order:  
1
Press EQ and hold to switch to equali-  
SP-SEL (speakers)BAND (bands)  
zer function.  
Press EQ and hold until an equalizer curve  
name appears in the display.  
FREQUENCY (center frequency)LEVEL  
(equalizer level)Q. FACTOR (Q factor)  
#
To switch to SFC function, press EQ and hold  
4
Touch  
be adjusted.  
Touch or  
or  
to select the speaker to  
again.  
until the desired speaker ap-  
2
Press EQ to select the equalizer.  
pears in the display.  
Press EQ repeatedly to switch between the fol-  
lowing equalizers:  
REAR (rear speakers)CENTER (center speak-  
er)FRONT (front speakers)  
SUPER BASSPOWERFULNATURALꢄ  
VOCALFLATCUSTOM1CUSTOM2  
#
You cannot select speakers whose size is set  
at OFF.  
5
Touch  
lect the equalizer band to be adjusted.  
Each time you touch or selects equalizer  
bands in the following order:  
LOW (low)MID (mid)HIGH (high)  
and then touch  
or  
to se-  
Adjusting 3-band parametric  
equalizer  
For CUSTOM1 and CUSTOM2 equalizer  
curves, you can adjust the front, rear and cen-  
ter equalizer curves separately by selecting a  
center frequency, an equalizer level and a Q  
factor for each band.  
6
Touch  
lect the center frequency of selected band.  
Touch or until the desired frequency ap-  
and then touch  
or  
to se-  
!
!
!
A separate CUSTOM1 curve can be cre-  
ated for each source.  
A CUSTOM2 curve can be created com-  
mon to all sources.  
pears in the display.  
40Hz50Hz63Hz80Hz100Hz125Hz  
160Hz200Hz250Hz315Hz400Hz  
500Hz630Hz800Hz1kHz1.25kHz  
1.6kHz2kHz2.5kHz3.15kHz4kHz  
5kHz6.3kHz8kHz10kHz12.5kHz  
The center speaker largely determines the  
sound image and getting the balance right  
isnt easy. We recommend reproducing a 2-  
ch. audio (a CD for example) and getting  
the balance right among the speakers ex-  
cept for the center, and then reproducing a  
5.1-ch. audio (Dolby Digital or DTS) and ad-  
justing the center speaker output to the  
balance you have already got among the  
other speakers.  
7
Touch  
just the equalizer level.  
Each time you touch or  
and then touch  
or  
to ad-  
increases or de-  
creases the equalizer level. +06 06 is dis-  
played as the level is increased or decreased.  
8
Touch  
lect the desired Q factor.  
Each time you touch or  
tween the following Q factor:  
and then touch  
or  
to se-  
1
Touch A.MENU and DSP and then touch  
switches be-  
NEXT twice.  
80  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Section  
DigitalSignalProcessor  
15  
WIDE (wide)NARROW (narrow)  
The auto-equalizer automatically measures  
the car interior acoustic characteristics, and  
then creates the auto-equalizer curve based  
on that information.  
#
You can adjust parameters for each band of  
the other speakers in the same way.  
Note  
You can select a center frequency for each band.  
You can change the center frequency in 1/3-oc-  
tave steps, but you cannot select frequencies that  
have intervals shorter than 1 octave among the  
center frequencies of the three bands.  
WARNING  
To prevent accidents, never carry out auto TA and  
EQ while driving. When this function measures  
the car interior acoustic characteristics to create  
an auto-equalizer curve, a loud measurement  
tone (noise) may be outputted from the speakers.  
CAUTION  
Using the auto-equalizer  
!
Carrying out auto TA and EQ under the follow-  
ing conditions may damage the speakers. Be  
sure to check the conditions thoroughly be-  
fore carrying out auto TA and EQ.  
When speakers are incorrectly connected.  
(e.g., When a rear speaker is connected to  
a subwoofer output.)  
When a speaker is connected to a power  
amp delivering output higher than the  
speakers maximum input power capabil-  
ity.  
If the microphone is placed in an unsuitable  
position the measurement tone may become  
loud and measurement may take a long time,  
resulting in a drain on battery power. Be sure  
to place the microphone in the specified loca-  
tion.  
The auto-equalizer is the equalizer curve cre-  
ated by auto TA and EQ (refer to Auto TA and  
You can turn the auto-equalizer on or off.  
1
Touch A.MENU and DSP and then touch  
NEXT twice.  
2
#
Touch AUTO EQ.  
You cannot use this function if auto TA and  
!
EQ has not been carried out.  
3
Touch a to turn the auto-equalizer on.  
#
To turn auto-equalizer off, touch b.  
Auto TA and EQ (auto-time  
alignment and auto-  
equalizing)  
Only when the multi-channel processor (e.g.,  
DEQ-P8000) is connected to this unit, you can  
operate this function.  
The auto-time alignment is automatically ad-  
justed for the distance between each speaker  
and the listening position.  
81  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Section  
15  
DigitalSignalProcessor  
!
!
Auto TA and EQ changes the audio settings  
as below:  
The fader/balance settings return to the  
center position. (Refer to page 73.)  
The equalizer curve switches to FLAT.  
(Refer to page 79.)  
It will be adjusted automatically to high  
pass filter setting for front, center and  
rear speaker.  
If you carry out auto TA and EQ when a pre-  
vious setting of this already exists, the set-  
ting will be replaced.  
Before operating the auto TA  
and EQ function  
!
Carry out auto TA and EQ in as quiet a  
place as possible, with the car engine and  
air conditioning switched off. Also cut  
power to car phones or portable telephones  
in the car, or remove them from the car be-  
fore carrying out auto TA and EQ. Sounds  
other than the measurement tone (sur-  
rounding sounds, engine sound, tele-  
phones ringing etc.) may prevent correct  
measurement of the car interior acoustic  
characteristics.  
!
Be sure to carry out auto TA and EQ using  
the supplied microphone. Using another  
microphone may prevent measurement, or  
result in incorrect measurement of the car  
interior acoustic characteristics.  
Carrying out auto TA and EQ  
1
Stop the car in a place that is as quiet  
as possible, close all doors, windows and  
the sun roof, and then turn the engine off.  
If the engine is left running, engine noise may  
prevent correct auto TA and EQ.  
!
!
When front speaker is not connected, auto  
TA and EQ cannot be carried out.  
When this unit is connected to a power  
amp with input level control, auto TA and  
EQ may not be possible if you lower power  
amp input level. Set the power amps input  
level to the standard position.  
2
Fix the supplied microphone in the cen-  
ter of the headrest of the drivers seat, fa-  
cing forward, using the belt (sold  
separately).  
!
!
When this unit is connected to a power  
amp with an LPF, turn off the LPF on the  
power amp before carrying out auto TA and  
EQ. In addition, the cut-off frequency for  
built-in LPF of an active subwoofer should  
be set to the highest frequency.  
The time alignment value calculated by  
auto TA and EQ may differ from the actual  
distance in the following circumstances.  
However, the distance has been calculated  
by computer to be the optimum delay to  
give accurate results for the circum-  
stances, so please continue to use this  
value.  
The auto TA and EQ may differ depending on  
where you place the microphone. If desired,  
place the microphone on the front passenger  
seat to carry out auto TA and EQ.  
When the reflected sound within a vehi-  
cle is strong and delays occur.  
3
Turn the ignition switch to ON or ACC.  
When delays occur for low sounds due  
to the influence of the LPF on active  
subwoofers or external amps.  
If the cars air conditioner or heater is turned  
on, turn it off. Noise from the fan in the air  
82  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Section  
DigitalSignalProcessor  
15  
#
When all speakers are connected, auto TA  
conditioner or heater may prevent correct auto  
TA and EQ.  
and EQ is completed in about nine minutes.  
#
#
To stop auto TA and EQ, touch STOP.  
To cancel auto TA and EQ part way through,  
#
Press SOURCE to turn the source on if this  
unit is turned off.  
touch BACK or ESC.  
4
Select the position for the seat on  
10 When auto TAand EQ is completed,  
Complete is displayed.  
which the microphone is placed.  
When correct measurement of car interior  
acoustic characteristics is not possible, an  
error message is displayed. (Refer to Under-  
#
If no position is selected before you start auto  
TA and EQ, FRONT-L is selected automatically.  
5
Press SOURCE and hold until the unit  
turns off.  
11 Touch ESC to cancel the auto TAand EQ  
mode.  
6
Press and hold EQ to enter the auto TA  
and EQ measurement mode.  
12 Store the microphone carefully in the  
glove compartment.  
7
Plug the microphone into the micro-  
Store the microphone carefully in the glove  
compartment or any other safe place. If the  
microphone is subjected to direct sunlight for  
an extended period, high temperatures may  
cause distortion, color change or mal-  
function.  
phone input jack on the multi-channel pro-  
cessor.  
For details concerning operation, refer to the  
multi-channel processors operation manual.  
8
EQ.  
Touch START to start the auto TA and  
Get out of the car and close the door  
9
within 10 seconds when the 10-second  
count-down starts.  
The measurement tone (noise) is outputted  
from the speakers, and auto TA and EQ be-  
gins.  
83  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Section  
16  
Setting up the DVD player  
Introduction of DVD setup  
adjustments  
Note  
If you do not operate the DVD setup function  
within about 30 seconds, the display is automati-  
cally returned to the playback display.  
Setting the subtitle language  
You can set a desired subtitle language. If the  
selected subtitle language is recorded on the  
DVD, subtitles are displayed in that language.  
1
1
Touch SETUP and LANGUAGE and then  
You can use this menu to change audio, subti-  
tle, parental lock and other DVD settings.  
touch SUB TITLE LANGUAGE.  
A subtitle language menu is displayed and the  
currently set language is highlighted.  
!
When watching a DVD/Video CD on the  
rear display independently, you cannot op-  
erate this menu.  
#
To switch to the second language select  
menu, touch NEXT.  
To return to the first language select menu,  
touch PREV.  
#
1 DVD setup menu display  
Shows the DVD setup menu names.  
2
Touch the desired language.  
1
Touch g.  
A subtitle language is set.  
#
SETUP will be displayed instead of MENU.  
If you have selected OTHERS, refer to When  
you select OTHERS on this page.  
2
Touch SETUP when the disc is stopped.  
The DVD setup menu is displayed.  
When SETUP is not displayed, you can display  
it by touching the screen.  
You can also display DVD SETUP by pressing  
Notes  
#
!
!
If the selected language is not recorded on  
the disc, the language specified on the disc is  
displayed.  
You can also switch the subtitle language by  
touching SUB.T during playback. (Refer to  
Even if you use SUB.T to switch the subtitle  
language, this does not affect the settings  
here.  
#
MENU on the remote control when the disc is  
stopped.  
3
Touch any of LANGUAGE, VISUAL or  
OTHERS to display the DVD setup function  
names.  
The DVD setup function names in selected  
menu are displayed.  
!
#
To go to the next group of function names,  
touch NEXT.  
#
To return to the previous group of function  
When you select OTHERS  
When you select OTHERS, a language code  
input display is shown. Refer to Language code  
names, touch PREV.  
#
#
To return to the previous display, touch BACK.  
To return to the playback display, touch ESC.  
84  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Section  
Setting up the DVD player  
16  
chart for DVD on page 107 to input the four-  
digit code of the desired language.  
Setting the menu language  
You can set the preferred language for dis-  
plays of menus recorded on a disc.  
1
#
#
Touch 09 to input the language code.  
To cancel the inputted numbers, touch C.  
You can also input the desired number by  
1
Touch SETUP and LANGUAGE and then  
touch MENU LANGUAGE.  
A menu language menu is displayed and the  
currently set language is highlighted.  
using the joystick and 0-9.  
2
While the inputted number is dis-  
#
To switch to the second language select  
menu, touch NEXT.  
To return to the first language select menu,  
touch PREV.  
played, touch ENTER.  
#
Setting the audio language  
You can set the preferred audio language.  
2
Touch the desired language.  
The menu language is set.  
#
If you have selected OTHERS, refer to When  
1
Touch SETUP and LANGUAGE and then  
you select OTHERS on the previous page.  
touch AUDIO LANGUAGE.  
An audio language menu is displayed and the  
currently set language is highlighted.  
Note  
If the selected language is not recorded on the  
disc, the language specified on the disc is dis-  
played.  
#
To switch to the second language select  
menu, touch NEXT.  
To return to the first language select menu,  
touch PREV.  
#
2
Touch the desired language.  
The audio language is set.  
Setting assist subtitles on  
or off  
#
If you have selected OTHERS, refer to When  
you select OTHERS on the previous page.  
Assist subtitles offer explanations for the au-  
rally impaired. However, they are only dis-  
played if they are recorded on the DVD.  
You can turn assist subtitles on or off as de-  
sired.  
Notes  
!
!
If the selected language is not recorded on  
the disc, the language specified on the disc is  
outputted.  
You can also switch the audio language by  
touching AUDIO during playback. (Refer to  
1
Touch SETUP and LANGUAGE and then  
touch NEXT.  
2
Touch ASSIST SUB TITLE.  
!
Even if you use AUDIO to switch the audio  
language, this does not affect the settings  
here.  
3
#
Touch a to turn assist subtitles on.  
To turn assist subtitles off, touch b.  
85  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Section  
16  
Setting up the DVD player  
16 : 9 LB  
whether the disc package bears the  
mark. (See page 13.)  
Setting angle icon display  
You can set it up so that the angle icon ap-  
pears on scenes where the angle can be  
switched.  
!
Some discs do not enable changing of the TV  
aspect. For details, refer to the discs in-  
structions.  
1
Touch SETUP and VISUAL and then  
touch MULTI ANGLE.  
Setting the parentallock  
2
Touch a to turn angle icon display on.  
Some DVD video discs let you use parental  
lock to restrict the viewing of violent and adult-  
oriented scenes by children. You can set the  
parental lock level in steps as desired.  
#
To turn angle icon display off, touch b.  
!
When you set a parental lock level and then  
play a disc featuring parental lock, code  
number input indications may be dis-  
played. In this case, playback will begin  
when the correct code number is input.  
Setting the aspect ratio  
There are two kinds of display. A wide screen  
display has a width-to-height ratio (TV aspect)  
of 16:9, while a regular display has a TV aspect  
of 4:3. Be sure to select the correct TV aspect  
for the display connected to REAR MONITOR  
OUT.  
Setting the code number and level  
When you first use this function, register your  
code number. If you do not register a code  
number, parental lock will not operate.  
!
!
1
When using a regular display, select either  
LETTER BOX or PANSCAN. Selecting 16 : 9  
may result in an unnatural picture.  
If you select the TV aspect, the units dis-  
play changes to the same setting.  
1
Touch SETUP and VISUAL and then  
touch PARENTAL.  
Touch SETUP and VISUAL and then  
touch TV ASPECT.  
2
Touch 09 to input a four digit code  
number.  
2
Touch any of the following touch panel  
keys to select the TV aspect.  
3
While the inputted number is dis-  
!
!
16 : 9 Wide screen picture (16:9) is dis-  
played as it is (initial setting)  
LETTER BOX The picture is the shape of a  
letterbox with black bands at the top and  
bottom of the screen  
played, touch ENTER.  
The code number is set, and you can now set  
the level.  
4
Touch any of 18 to select the desired  
!
PANSCAN The picture is cut short at the  
right and left of the screen  
level.  
The parental lock level is set.  
!
!
LEVEL 8 Playback of the entire disc is pos-  
sible (initial setting)  
LEVEL 7LEVEL 2 Playback of discs for  
children and non-adult-oriented discs is  
possible  
Notes  
!
When playing discs that do not specify  
PANSCAN, playback is with LETTER BOX  
even if you select PANSCAN setting. Confirm  
86  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Section  
Setting up the DVD player  
16  
!
LEVEL 1 Playback of discs for children  
only is possible  
If you forget your code number  
Refer to Changing the level on this page, and  
touch C 10 times. The registered code number  
is canceled, letting you register a new one.  
Notes  
!
!
We recommend to keep a record of your code  
number in case you forget it.  
The parental lock level is recorded on the disc.  
You can confirm it by looking at the disc pack-  
age, included literature or on the disc itself.  
With discs that do not feature a recorded par-  
ental lock level, you cannot use parental lock.  
With some discs, parental lock operates to  
skip certain scenes only, after which normal  
playback resumes. For details, refer to the  
discs instructions.  
Automatic playback of DVDs  
When a DVDs disc with DVD menu is inserted,  
this unit will cancel the DVD menu automati-  
cally and start playback from the first chapter  
of the first title.  
!
!
Some DVDs may not operate properly. If  
this function is not fully operated, turn this  
function off and start playback.  
1
Touch SETUP and OTHERS and then  
Changing the level  
touch DVD AUTO PLAY.  
You can change the set parental lock level.  
2
#
#
Touch a to turn automatic playback on.  
To turn automatic playback off, touch b.  
When the automatic playback is on, you can-  
1
Touch SETUP and VISUAL and then  
touch PARENTAL.  
not operate repeating play of DVD disc (refer to  
2
Touch 09 to input the registered code  
number.  
3
Touch ENTER.  
This enters the code number, and you can now  
change the level.  
Setting remote control  
code type  
#
If you input an incorrect code number, the  
When the remote control operation switch is  
set to DVD, changing the remote control code  
type enables you to operate the Pioneer DVD  
player with the supplied remote control. There  
are three remote codes, code type A, code  
type B and code type AVH. When operating a  
multi-DVD player (e.g. XDV-P9II), select code  
A. When operating a DVD navigation unit, se-  
lect code B. When operating this unit, select  
code AVH.  
icon is displayed. Touch C and input the cor-  
rect code number.  
#
If you forget your code number, refer to If you  
forget your code number on this page.  
4
Touch any of 18 to select the desired  
level.  
The new parental lock level is set.  
87  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Section  
16  
Setting up the DVD player  
1
Set the remote control selection switch  
on the left side of the remote control to  
the appropriate position with a pen tip or  
other pointed instrument .  
!
If you select AVH mode, there is no need to  
take the following procedure.  
!
If you select A/B mode, take the following  
procedure and change the code type to the  
appropriate type.  
2
Press 7 and 0 on the remote control si-  
multaneously to change the code type.  
Initially, the code type is set to A. Each time  
you press 7 and 0 simultaneously on the re-  
mote control the code type switches between  
A and B.  
88  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Section  
InitialSettings  
17  
Adjusting initialsettings  
Switching the warning tone  
If the front panel is not detached from the  
head unit within five seconds of turning off the  
ignition, a warning tone will sound. You can  
turn off the warning tone.  
1
Touch A.MENU and INITIAL and then  
touch DETACH WARNING.  
2
#
Touch a to turn warning tone on.  
To turn warning tone off, touch b.  
1
Initial settings lets you perform initial setup of  
different settings for this unit.  
Switching the auxiliary setting  
1 Function display  
Shows the function names.  
It is possible to use auxiliary equipment with  
this unit. Activate the auxiliary setting when  
using auxiliary equipment connected to this  
unit.  
1
Touch the source icon and then touch  
OFF to turn this unit off.  
When the source icon is not displayed, you  
can display it by touching the screen.  
#
1
Touch A.MENU and INITIAL and then  
touch AUX.  
2
Touch A.MENU and then touch INITIAL  
2
#
Touch a to turn auxiliary setting on.  
To turn auxiliary setting off, touch b.  
to display the function names.  
The function names are displayed and oper-  
able ones are highlighted.  
#
When A.MENU is not displayed, you can dis-  
play it by touching the screen.  
You can also display MENU by clicking the  
joystick.  
Setting the rear output and  
subwoofer controller  
#
#
To go to the next group of function names,  
This units rear output (rear speaker leads out-  
put and RCA rear output) can be used for full-  
range speaker (FULL) or subwoofer (SUB. W)  
connection. If you switch the rear output set-  
ting to the SUB. W, you can connect a rear  
speaker lead directly to a subwoofer without  
using an auxiliary amp.  
touch NEXT.  
#
To return to the previous group of function  
names, touch PREV.  
#
When the multi-channel processor (e.g., DEQ-  
P8000) is connected to this unit, you can operate  
DIGITAL ATT instead of REAR SPEAKER.  
#
#
To return to the previous display, touch BACK.  
To return to the display of each source, touch  
ESC.  
89  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Section  
17  
InitialSettings  
!
Both rear speaker leads output and RCA rear  
output are switched simultaneously in this  
setting.  
Initially, the unit is set for rear full-range speak-  
er connection (FULL). When rear output is  
connected to full range speakers (when FULL  
is selected), you can connect the RCA sub-  
woofer output to a subwoofer. In this case, you  
can select whether to use the subwoofer con-  
trollers (low pass filter, phase) built-in SUB.W  
or the auxiliary FULL.  
Correcting distorted sound  
You can minimize distortion that may be  
caused by the equalizer curve settings.  
Setting an equalizer level high can cause dis-  
tortion. If high sound is crippled or distorted,  
try switching to LOW. Normally, leave the set-  
ting at HIGH to ensure quality sound.  
!
When the multi-channel processor (e.g.,  
DEQ-P8000) is connected to this unit, you  
cannot operate this function.  
1
Touch A.MENU and INITIAL and then  
touch REAR SPEAKER.  
!
Only when the multi-channel processor  
(e.g., DEQ-P8000) is connected to this unit,  
you can operate this function.  
2
Touch  
put setting.  
Touch to select full-range speaker and  
FULL appears in the display. Touch to select  
subwoofer and SUB. W appears in the display.  
When no subwoofer is connected to the rear  
output, select FULL.  
When a subwoofer is connected to the rear  
output, set for subwoofer SUB. W.  
When the rear output setting is SUB. W, you  
cannot change the subwoofer controller.  
or to switch the rear out-  
1
Touch A.MENU and INITIAL and then  
touch DIGITAL ATT.  
#
2
Touch  
tenuator setting.  
Touch to select low setting and LOW ap-  
pears in the display. Touch to select high  
or  
to switch the digital at-  
#
#
setting and HIGH appears in the display.  
3
Touch  
or  
to switch the subwoofer  
output or non fading output.  
Switching the sound  
muting/attenuation  
Sound from this system is muted, attenuated  
or mixed automatically in the following cases:  
Touch  
to select subwoofer output and  
SUB.W appears in the display. Touch  
lect non fading output and FULL appears in  
the display.  
to se-  
!
!
When a call is made or received using a  
cellular telephone connected to this unit.  
When the voice guidance is output from a  
Pioneer navigation unit connected to this  
unit.  
Notes  
!
!
Even if you change this setting, there is no  
output unless you turn the nonfading output  
or subwoofer output (refer to Using subwoofer  
output on page 69) in the audio menu on.  
If you change the subwoofer controller, sub-  
woofer output and nonfading output in the  
audio menu return to the factory settings.  
1
Touch A.MENU and INITIAL and then  
touch TEL/GUIDE.  
90  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Section  
InitialSettings  
17  
2
Touch  
ing, attenuation or mixing.  
Touch or until the desired setting ap-  
pears in the display.  
or  
to select any of the mut-  
1
Touch A.MENU and INITIAL and then  
touch NEXT.  
2
Touch SUB DISPLAY DIMMER.  
!
!
MUTE Muting  
ATT 20dB Attenuation (ATT 20dB has a  
stronger effect than ATT 10dB)  
ATT 10dB Attenuation  
3
#
Touch a to turn dimmer on.  
To turn dimmer off, touch b.  
!
Notes  
Mixing navigation voice/  
beep and audio sound  
When there is a navigation guidance, you can  
mix the guidance voice/beep sound from a  
Pioneer navigation unit with the audio sound  
from this system. You can select either mixing  
both the guidance voice and the beep sound  
or the guidance voice only.  
!
!
The sound is turned off, MUTE or ATT is dis-  
played and no audio adjustment is possible.  
Operation returns to normal when the phone  
connection or the voice guidance is ended.  
Switching the automatic  
disc playback  
You can turn automatic disc playback on or off  
when you insert a disc into the disc loading  
slot. When this function is on, the disc will be  
automatically played after it is inserted into  
the disc loading slot.  
!
!
!
1
You can operate this function only when a  
Pioneer navigation unit is connected to this  
unit.  
When the multi-channel processor (e.g.,  
DEQ-P8000) is connected to this unit, you  
cannot use this function.  
We recommend that you select GUIDE to  
ensure quality sound.  
Initially, this function is set to on.  
1
Touch A.MENU and INITIAL and then  
Touch A.MENU and INITIAL and then  
touch DVD DISC AUTO.  
touch NEXT.  
2
Touch a to turn automatic disc play-  
2
3
Touch NAVI MIXING.  
Touch a or b to switch the mixing of  
back on.  
#
b.  
To turn automatic disc playback off, touch  
navigation voice/beep.  
Touch a to select ALL (mixing both guidance  
voice and beep). Touch b to select GUIDE  
(mixing guidance voice only).  
Switching the dimmer  
setting for sub-display  
To prevent the sub-display from being too  
bright at night, the sub-display is automati-  
cally dimmed when the cars headlights are  
turned on. You can turn dimmer on or off.  
Resetting the audio functions  
You can reset all audio functions except vo-  
lume.  
91  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Section  
17  
InitialSettings  
!
Only when the multi-channel processor  
(e.g., DEQ-P8000) is connected to this unit,  
you can operate this function.  
1
Touch A.MENU and INITIAL and then  
touch NEXT.  
2
3
4
Touch AUDIO RESET.  
Touch RESET.  
Touch RESET again to reset audio func-  
tions.  
#
To cancel resetting the audio functions, touch  
CANCEL.  
92  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Section  
Other Functions  
18  
1
Touch A.MENU and SETUP and then  
Introduction of setup  
adjustments  
touch AV INPUT.  
2
Touch  
or  
to select the video input  
setting.  
Touch  
or until the desired setting ap-  
pears in the display.  
!
!
!
OFF No video component is connected  
VIDEO External video component  
M-DVD DVD player connected with RCA  
cable  
#
When a DVD player is connected with an AV-  
1
BUS cable, do not select M-DVD otherwise no  
picture will be displayed even if you select  
S-DVD.  
1 Setup menu display  
Shows the setup function names.  
%
Touch A.MENU and then touch SETUP  
to display the setup function names.  
The setup function names are displayed and  
operable ones are highlighted.  
Setting for rear view camera  
CAUTION  
#
When A.MENU is not displayed, you can dis-  
play it by touching the screen.  
You can also display MENU by clicking the  
joystick.  
Pioneer recommends the use of a camera  
which outputs mirror reversed images, other-  
wise screen image may appear reversed.  
#
#
#
ESC.  
To return to the previous display, touch BACK.  
To return to the display of each source, touch  
This unit features a function that automatically  
switches to the rear view camera video (BACK  
UP CAMERA IN jack) when a rear view cam-  
era is installed on your vehicle. When the gear  
shift is in REVERSE (R) position, the video  
automatically switches to a rear view camera  
video. (For more details, consult your dealer.)  
Note  
If you do not operate the setup function within  
about 30 seconds, the display is automatically re-  
turned to the source display.  
!
Confirm the setting immediately whether  
the display changes to a rear view camera  
video when the gear shift is moved to RE-  
VERSE (R) from another position.  
When the display changes to a rear view  
camera video during normal drivings,  
switch to another setting.  
!
!
1
Setting the video input  
You can switch the setting according to the  
connected component.  
!
!
To return to the source display, press  
V.ADJ.  
Select VIDEO to watch video of a con-  
nected component as AV source.  
Select M-DVD to watch video of a con-  
nected DVD player as S-DVD source.  
Touch A.MENU and SETUP and then  
touch BACK UP CAMERA.  
93  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Section  
18  
Other Functions  
2
Touch  
to turn rear view camera set-  
Setting the automatic open  
function  
ting on.  
#
To turn rear view camera setting off, touch  
.
To prevent the display from hitting the shift  
lever of an automatic vehicle when it is in P  
(park) position, or when you do not wish the  
display to open/close automatically, you can  
set the automatic open function in the manual  
mode.  
3
Touch or to select an appropriate  
setting for polarity.  
Each time you touch  
tween the following polarity:  
or  
it switches be-  
!
BATTERY When the polarity of the con-  
nected lead is positive while the gear shift  
is in REVERSE (R) position  
Furthermore, to adjust the LCD panel slide po-  
sition, you can turn the set back on or off.  
!
GND When the polarity of the connected  
lead is negative while the gear shift is in RE-  
1
Touch A.MENU and SETUP and then  
touch FLAP SETTING.  
VERSE (R) position  
2
Touch  
the back.  
Touch  
front.  
and the LCD panel slides to  
#
and the LCD panel slides to the  
Selecting the video of rear  
display  
When the navigation image is displayed on  
front display, you can select either showing  
the navigation image on rear display or a video  
of a selected source.  
3
Touch  
open/close automatically or manually.  
Touch to select MANUAL, and you have to  
press OPEN/CLOSE to open/close the display.  
Touch to select AUTO, and the display  
or  
to select the display to  
!
Only when a Pioneer navigation unit is con-  
nected to this unit, you can switch the  
video of rear display.  
automatically opens/closes when power to  
this unit is turned on.  
!
When selecting SOURCE in  
REAR DISPLAY, when the selected source  
is an audio source, nothing is displayed on  
rear display.  
Setting the clock  
Use these instructions to set the clock.  
1
Touch A.MENU and SETUP and then  
touch REAR DISPLAY.  
1
Touch A.MENU and SETUP and then  
touch CLOCK ADJUST.  
2
Touch  
rear display.  
Touch or  
appears in the display.  
or  
to select the video on  
2
Touch OFF to turn the clock display on.  
until the desired video setting  
ON will appear in the display instead of OFF.  
Clock display is now on.  
!
SOURCE Display the video of the selected  
#
You can also turn the clock display on or off by  
source on rear display  
pressing FLIP DOWN/CLOCK when the LCD  
panel is closed.  
!
NAVI Display the navigation image on  
rear display  
#
To turn the clock display off, touch ON.  
94  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Section  
Other Functions  
18  
3
Touch  
the clock display you wish to set.  
Each time you touch or it will select one  
or  
to select the segment of  
2
Touch  
or  
to select the desired  
or selects the item  
item.  
Each time you touch  
in the following order:  
segment of the clock display:  
HourMinute  
As you select segments of the clock display  
the segment selected will be highlighted.  
TOUCH KEY COLOR (touch panel key color)  
BACKGROUND PICTURE (background pic-  
ture)MOTION TEXT (motion text setting)  
3
Touch  
or  
to select the touch panel  
key color.  
Touch  
to select the touch panel key color  
blue and BLUE appears in the display. Touch  
to select the touch panel key color silver  
and SILVER appears in the display.  
#
Changing the touch panel key color switches  
the skin of the SPEANA1 (spectrum analyzer 1)  
and LEVEL METER2 (level meter 2). (Refer to  
4
Touch  
or  
to set the clock.  
it increases the se-  
Each time you touch  
lected hour or minute. Each time you touch  
it decreases the selected hour or minute.  
4
Touch  
lect the back ground picture.  
Touch to select background picture 1 and  
BGP1 appears in the display. Touch to se-  
and then touch  
or  
to se-  
Notes  
!
!
You can match the clock to a time signal by  
touching JUST.  
If the minute is 0029, the minutes are  
rounded down. (e.g., 10:18 becomes  
10:00.)  
If the minute is 3059, the minutes are  
rounded up. (e.g., 10:36 becomes 11:00.)  
Even when the sources are off, the clock dis-  
play appears on the display.  
lect background picture 2 and BGP2 appears  
in the display.  
5
Touch  
lect the motion text setting.  
Touch to select motion text off and OFF ap-  
pears in the display. Touch to select motion  
test on and ON appears in the display.  
When the vehicles parking brake is not de-  
and then touch  
or  
to se-  
#
tected, motion text is not activated.  
Setting the display  
appearance  
Touch panel key color, background picture and  
motion text can be changed.  
Using the AUX source  
An IP-BUS-RCA Interconnector such as the  
CD-RB20/CD-RB10 (sold separately) lets you  
connect this unit to auxiliary equipment fea-  
turing RCA output. For more details, refer to  
the IP-BUS-RCA Interconnector owners man-  
ual.  
1
Touch A.MENU and SETUP and then  
touch APPEARANCE.  
95  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Section  
18  
Other Functions  
4
Touch  
to move the cursor to the  
Selecting AUX as the source  
next character position.  
When the desired letter is displayed, touch  
to move the cursor to the next next position  
and then select the next letter. Touch  
move backwards in the display.  
%
Touch the source icon and then touch  
AUX to select AUX as the source.  
When the source icon is not displayed, you  
can display it by touching the screen.  
If the auxiliary setting is not turned on, AUX  
#
to  
#
cannot be selected. For more details, see Switch-  
5
Touch OK to store the entered title in  
memory.  
6
play.  
Touch ESC to return to the playback dis-  
Setting the AUX title  
The title displayed for the AUX source can be  
changed.  
1
After you have selected AUX as the  
Switching the background  
display  
source, touch A.MENU and FUNCTION and  
then touch NAME EDIT.  
You can switch background displays while lis-  
2
Touch ABC to select the desired charac-  
tening to each source.  
ter type.  
Touch ABC repeatedly to switch between the  
following character types:  
Alphabet (upper case), numbers and symbols  
Alphabet (lower case)European letters,  
such as those with accents (e.g., á, à, ä, ç)  
%
Press ENTERTAINMENT.  
Each time you press ENTERTAINMENT the  
display changes in the following order:  
Audio source  
Background still pictureSPEANA1 (spec-  
trum analyzer 1)SPEANA2 (spectrum analy-  
zer 2)LEVEL METER1 (level meter 1)  
LEVEL METER2 (level meter 2)VISUAL1  
(background visual 1)VISUAL2 (background  
visual 2)VISUAL3 (background visual 3)  
CLOCK (entertainment clock)NAVI (navi-  
gation unit wall paper)  
#
You can select to input numbers and symbols  
by touching 123.  
3
Touch  
alphabet.  
Each time you touch  
or  
to select a letter of the  
it will display a letter  
of the alphabet in AB C ... X Y Z , numbers  
and symbols in 1 2 3 ... | } ¯ order. Each time  
Video source  
you touch  
verse order, such as Z Y X ... C B A.  
it will display a letter in the re-  
Video of currently selected sourceBack-  
ground still pictureSPEANA1 (spectrum  
analyzer 1)SPEANA2 (spectrum analyzer 2)  
LEVEL METER1 (level meter 1)  
LEVEL METER2 (level meter 2)VISUAL1  
(background visual 1)VISUAL2 (background  
visual 2)VISUAL3 (background visual 3)  
CLOCK (entertainment clock)NAVI (navi-  
gation unit wall paper)  
96  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Section  
Other Functions  
18  
Note  
In the following cases, the background display  
will not change:  
!
!
!
When the AV (video input) is not set to VIDEO  
(refer to page 93).  
When the DVD/Video CD playback is not  
turned on for rear display (refer to page 22).  
When a Pioneer navigation unit is not con-  
nected to this unit.  
Using the PGM button  
You can operate the preprogrammed functions  
for each source by using PGM.  
%
Press PGM to turn pause on when se-  
lecting the following sources:  
!
!
!
DVD Built-in DVD player  
S-DVD DVD player/multi-DVD player  
M-CD Multi-CD player  
#
To turn pause off, press PGM again.  
%
Press PGM and hold to turn BSM on  
when selecting TUNER as the source.  
Press PGM and hold until the BSM turns on.  
#
To cancel the storage process, press PGM  
again.  
%
Press PGM and hold to turn BSSM on  
when selecting TV as the source.  
Press PGM and hold until the BSSM turns on.  
#
To cancel the storage process, press PGM  
again.  
%
Press PGM to select the desired channel  
select setting when selecting XM as the  
source.  
Press PGM repeatedly to switch between the  
following channel select settings:  
CHNUMBER (channel number select setting)  
CATEGORY (channel category select  
setting)  
97  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Appendix  
AdditionalInformation  
Troubleshooting  
Common  
Symptom  
Cause  
Action (See)  
Power doesnt turn on.  
The unit doesnt operate.  
Leads and connectors are incor-  
rectly connected.  
Confirm once more that all connections are  
correct.  
The fuse is blown.  
Rectify the reason for the fuse blowing, then  
replace the fuse. Be very sure to install the  
correct fuse with the same rating.  
Noise and other factors are causing Press RESET. (Page 14)  
the built-in microprocessor to oper-  
ate incorrectly.  
Operation with the remote con- The remote control operation mode Switch to the correct remote control mode.  
trol isnt possible.  
is incorrect.  
(Page 19)  
The unit does not operate cor-  
rectly even when the appropriate  
remote control buttons are  
pressed.  
The remote control code is incor-  
rect.  
Make sure the remote control selection  
switch setting and code type setting are the  
Battery power is low.  
Load new battery. (Page 14)  
Check by using another disc.  
Some operations are prohibited  
with certain discs.  
Playback is not possible.  
The disc is dirty.  
Clean disc. (Page 102)  
The loaded disc is a type this unit  
cannot play.  
Check what type the disc is.  
Non compatible video system disc  
is loaded.  
Change to a disc compatible to your video  
system.  
No sounds are heard.  
Cables are not connected correctly. Connect the cables correctly.  
The volume level will not rise.  
The unit is performing still, slow mo- There is no sound during still, slow motion or  
tion or frame-by-frame playback.  
frame-by-frame playback.  
There is no picture.  
The parking brake cord is not con-  
nected.  
Connect a parking brake cord, and apply the  
parking brake.  
The parking brake is not applied.  
Connect a parking brake cord, and apply the  
parking brake.  
The icon  
is displayed, and op- The operation is prohibited for the  
This operation is not possible.  
eration is not possible.  
disc.  
The operation is not compatible  
This operation is not possible.  
with the discs organization.  
The picture stops (pauses) and Reading of data has become impos- After pressing g once, start playback once  
the unit cannot be operated.  
sible during playback.  
The volume level is low.  
The attenuator is on.  
more.  
There is no sound.  
Volume level is low.  
Adjust the volume level.  
Turn the attenuator off.  
Secure the unit firmly.  
There is audio and video skip-  
ping.  
The unit is not firmly secured.  
The picture is stretched, the as- The aspect setting is incorrect for  
Select the appropriate setting for your display.  
pect is incorrect.  
the display.  
98  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Appendix  
AdditionalInformation  
Symptom  
Cause  
Action (See)  
When the ignition switch is  
turned ON (or turned to ACC),  
the motor sounds.  
The unit is confirming whether a  
disc is loaded or not.  
This is a normal operation.  
Nothing is displayed.  
The rear view camera is not con-  
Connect a rear view camera.  
The touch panel keys cannot be nected.  
used. BACK UP CAMERA is at incorrect  
setting.  
Press V.ADJ to return to the source display  
and then select the correct setting for BACK  
UP CAMERA. (Page 93)  
Problems during DVD playback  
Symptom  
Cause  
Action (See)  
Playback is not possible.  
The loaded disc has a different re-  
gion number from this unit.  
Replace the disc with one featuring the same  
region number as this unit. (Page 9, Page  
109)  
A parental lock message is dis- Parental lock is on.  
played and playback is not pos-  
sible.  
Turn parental lock off or change the level.  
Parental lock cannot be can-  
celed.  
The code number is incorrect.  
Input the correct code number. (Page 86)  
You have forgotten your code num- Press CLEAR 10 times to cancel the code  
ber.  
number. (Page 87)  
Dialog language (and subtitle  
language) cannot be switched. multiple language recordings.  
The DVD playing does not feature  
You cannot switch among multiple languages  
if they are not recorded on the disc.  
You can only switch between items Switch using the disc menu.  
indicated in the disc menu.  
No subtitles are displayed.  
The DVD playing does not feature  
subtitles.  
Subtitles are not displayed if they are not re-  
corded on the disc.  
You can only switch between items Switch using the disc menu.  
indicated in the disc menu.  
Playback is not with the audio  
The DVD playing does not feature  
Switching to a selected language is not possi-  
language and subtitle language dialog or subtitles in the language  
ble if the language selected in DVD SETUP is  
settings selected in DVD SETUP. selected in DVD SETUP.  
not recorded on the disc.  
Switching the viewing angle is  
not possible.  
The DVD playing does not feature  
scenes shot from multiple angles.  
You cannot switch between multiple angles if  
the DVD does not feature scenes recorded  
from multiple angles.  
You are trying to switch to multiple Switch between multiple angles when watch-  
angle viewing of a scene that is not ing scenes recorded from multiple angles.  
recorded from multiple angles.  
The picture is extremely unclear/ The disc features a signal to prohibit Since this unit is compatible with the copy  
distorted and dark during play- copying. (Some discs may have  
back. this.)  
guard analog copy protect system, when play-  
ing a disc that has a signal prohibiting copy-  
ing, the picture may suffer from horizontal  
stripes or other imperfections when viewed  
on some displays. This does not mean this  
unit is malfunctioning.  
99  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Appendix  
AdditionalInformation  
Problems during Video CD playback  
Symptom  
Cause  
Action (See)  
The PBC (playback control)  
The Video CD playing does not fea- This operation is not possible with Video CDs  
menu display cannot be called ture PBC.  
up.  
not featuring PBC.  
Repeat play and track/time  
search are not possible.  
The Video CD playing features PBC. This operation is not possible with Video CDs  
featuring PBC.  
Error messages  
When problems occur with disc playback, an error message appears on the display. Refer to the  
table below to identify the problem, then take the suggested corrective action. If the error persists,  
contact your dealer or your nearest PIONEER Service Center.  
Message  
Cause  
Action (See)  
Clean disc.  
ERROR-02  
Dirty disc  
Scratched disc  
Electrical or mechanical  
Replace disc.  
Press RESET.  
ERROR-05  
DIFFERENT REGION DISC (RE- The disc does not have the same re- Replace the DVD video with one bearing the  
GION ERR)  
gion number as this unit  
correct region number.  
NON PLAYABLE DISC (NON-  
PLAY)  
This type of disc cannot be played  
by this unit  
Replace the disc with one this unit can play.  
The disc is loaded upside down  
Check that the disc is loaded correctly.  
THERMAL PROTECTION IN  
MOTION (TEMP)  
The temperature of this unit is out- Wait until the units temperature returns to  
side the normal operating range within normal operating limits.  
PROTECT  
All the files on the inserted disc are Replace disc.  
secured by digital rights manage-  
ment (DRM)  
TRK SKIPPED  
The inserted disc contains WMA  
files that are protected by digital  
rights management (DRM)  
Replace disc.  
Understanding auto TA and EQ error messages  
When correct measurement of car interior acoustic characteristics is not possible using the auto  
TA and EQ, an error message may appear on the display. If an error message appears, refer to the  
table below to see what the problem is and the suggested method of correcting the problem. After  
checking, try again.  
100  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Appendix  
AdditionalInformation  
Message  
Cause  
Action  
Error check MIC  
Microphone is not connected.  
Plug the supplied microphone securely into  
the jack.  
Error check front SP, Error  
The microphone cannot pick up the ! Confirm that the speakers are connected  
check FL SP, Error check FR SP, measuring tone of a speaker.  
Error check center SP, Error  
check RL SP, Error check RR SP,  
correctly.  
! Correct the input level setting of the power  
amp connected to the speakers.  
! Set the microphone correctly.  
Error check subwoofer  
Error check noise  
The surrounding noise level is too  
high.  
! Stop your car in a place that is as quiet as  
possible, and switch off the engine, air condi-  
tioner or heater.  
! Set the microphone correctly.  
101  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Appendix  
AdditionalInformation  
DVD player and care  
DVD discs  
!
Use only normal, round discs. If you insert  
irregular, non-round, shaped discs they  
may jam in the DVD player or not play prop-  
erly.  
!
!
!
With some DVD video discs, it may not be  
possible to use certain functions.  
It may not be possible to play back some  
DVD video discs.  
When DVD-R/DVD-RW discs are used,  
playback is possible only for discs which  
have been finalized.  
!
!
When DVD-R/DVD-RW discs are used,  
playback is possible only for discs which  
have been recorded with the Video format  
(video mode). It is not possible to play back  
DVD-RW discs which have been recorded  
with the Video Recording format (VR  
mode).  
It may not be possible to play back DVD-R/  
DVD-RW discs which have been recorded  
with the Video format (video mode), be-  
cause of disc characteristics, scratches or  
dirt on the disc, or dirt, condensation, etc.  
on the lens of this unit.  
!
!
Check all discs for cracks, scratches or  
warping before playing. Discs that have  
cracks, scratches or are warped may not  
play properly. Do not use such discs.  
Avoid touching the recorded (non-printed)  
surface when handling the disc.  
Store discs in their cases when not in use.  
Keep discs out of direct sunlight and do  
not expose the discs to high temperatures.  
Do not attach labels, write on or apply che-  
micals to the surface of the discs.  
!
!
!
!
!
!
It is not possible to play back DVD-ROM/  
DVD-RAM discs.  
To clean a disc, wipe the disc with a soft  
cloth outward from the center.  
Playback of discs recorded on a personal  
computer may not be possible, depending  
on the application settings and the environ-  
ment. Please record with the correct for-  
mat. (For details, contact the manufacturer  
of the application.)  
!
!
If the heater is used in cold weather, con-  
densation may form on components inside  
the DVD player. Condensation may cause  
the DVD player to not operate properly. If  
you think that condensation is a problem  
turn off the DVD player for an hour or so to  
allow it to dry out and wipe any damp discs  
with a soft cloth to remove the moisture.  
Road shocks may interrupt disc  
CD-R/CD-RW discs  
!
When CD-R/CD-RW discs are used, play-  
back is possible only for discs which have  
been finalized.  
!
It may not be possible to play back CD-R/  
CD-RW discs recorded on a music CD re-  
corder or a personal computer because of  
disc characteristics, scratches or dirt on  
the disc, or dirt, condensation, etc., on the  
lens of this unit.  
playback.  
102  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Appendix  
AdditionalInformation  
!
Playback of discs recorded on a personal  
computer may not be possible, depending  
on the application settings and the environ-  
ment. Please record with the correct for-  
mat. (For details, contact the manufacturer  
of the application.)  
Playback of CD-R/CD-RW discs may be-  
come impossible in case of direct exposure  
to sunlight, high temperatures, or the sto-  
rage conditions in the vehicle.  
Titles and other text information recorded  
on a CD-R/CD-RW disc may not be dis-  
played by this unit (in the case of audio  
data (CD-DA)).  
This unit conforms to the track skip func-  
tion of the CD-R/CD-RW disc. The tracks  
containing the track skip information are  
skipped automatically (in case of audio  
data (CD-DA)).  
!
This unit allows playback of MP3/WMA  
files on CD-ROM, CD-R and CD-RW discs.  
Disc recordings compatible with level 1  
and level 2 of ISO9660 and with the Romeo  
and Joliet file system can be played back.  
It is possible to play back multi-session  
compatible recorded discs.  
MP3/WMA files are not compatible with  
packet write data transfer.  
The maximum number of characters which  
can be displayed for a file name, including  
the extension (.mp3 or .wma), is 64, from  
the first character.  
The maximum number of characters which  
can be displayed for a folder name is 64.  
In case of files recorded according to the  
Romeo file system, only the first 64 charac-  
ters can be displayed.  
When playing discs with MP3/WMA files  
and audio data (CD-DA) such as CD-EXTRA  
and MIXED-MODE CDs, both types can be  
played only by switching mode between  
MP3/WMA and CD-DA.  
The folder selection sequence for playback  
and other operations becomes the writing  
sequence used by the writing software. For  
this reason, the expected sequence at the  
time of playback may not coincide with the  
actual playback sequence. However, there  
also is some writing software which per-  
mits setting of the playback order.  
Some audio CDs contain tracks that merge  
into one another without a pause. When  
these discs are converted to MP3/WMA  
files and burned to a CD-R/CD-RW/CD-  
ROM, the files will be played back on this  
player with a short pause between each  
one, regardless of the length of the pause  
between tracks on the original audio CD.  
!
!
!
!
!
!
!
!
!
!
!
If you insert a CD-RW disc into this unit,  
time to playback will be longer than when  
you insert a conventional CD or CD-R disc.  
Read the precautions with CD-R/CD-RW  
discs before using them.  
!
MP3 and WMA files  
!
MP3 is short for MPEGAudio Layer 3 and  
refers to an audio compression technology  
standard.  
WMA is short for Windows Media" Audio  
and refers to an audio compression tech-  
nology that is developed by Microsoft Cor-  
poration. WMA data can be encoded by  
using Windows Media Player version 7 or  
later.  
With some applications used to encode  
WMA files, this unit may not operate cor-  
rectly.  
With some applications used to encode  
WMA files, album names and other text in-  
formation may not be correctly displayed.  
!
!
!
!
Important  
!
When naming an MP3 or a WMA file, add the  
corresponding filename extension (.mp3 or  
.wma).  
103  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Appendix  
AdditionalInformation  
!
This unit plays back files with the filename ex-  
tension (.mp3 or .wma) as an MP3 or a WMA  
file. To prevent noise and malfunctions, do not  
use these extensions for files other than MP3  
or WMA files.  
!
!
This unit does not play back WMA files re-  
corded as VBR (variable bit rate).  
This unit doesnt support the following for-  
mats.  
Windows Media Audio 9 Professional  
(5.1ch)  
Windows Media Audio 9 Lossless  
Windows Media Audio 9 Voice  
MP3 additionalinformation  
!
Files are compatible with the ID3 Tag Ver.  
1.0, 1.1, 2.2, 2.3 and 2.4 formats for display  
of album (disc title), track (track title), artist  
(track artist) and comments. Ver. 2.x of ID3  
Tag is given priority when both Ver. 1.x and  
Ver. 2.x exist.  
About folders and MP3/  
WMA files  
!
An outline of a CD-ROM with MP3/WMA  
files on it is shown below. Subfolders are  
shown as folders in the folder currently se-  
lected.  
!
The emphasis function is valid only when  
MP3 files of 32, 44.1 and 48 kHz frequen-  
cies are played back. (16, 22.05, 24, 32,  
44.1, 48 kHz sampling frequencies can be  
played back.)  
!
!
There is no m3u playlist compatibility.  
There is no compatibility with the MP3i  
(MP3 interactive) or mp3 PRO formats.  
The sound quality of MP3 files generally be-  
comes better with an increased bit rate.  
This unit can play recordings with bit rates  
from 8 kbps to 320 kbps, but in order to be  
able to enjoy sound of a certain quality, we  
recommend using only discs recorded with  
a bit rate of at least 128 kbps.  
!
WMA additionalinformation  
!
!
!
This unit plays back WMA files encoded by  
Windows Media Player version 7 and 8.  
You can only play back WMA files in the fre-  
quencies 32, 44.1 and 48 kHz.  
The sound quality of WMA files generally  
becomes better with an increased bit rate.  
This unit can play recordings with bit rates  
from 48 kbps to 192 kbps, but in order to be  
able to enjoy sound of a certain quality, we  
recommend using discs recorded with a  
higher bit rate.  
1
2
3
1 First level  
104  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Appendix  
AdditionalInformation  
2 Second level  
Handling the display  
!
When the display is subjected to direct sun-  
3 Third level  
light for a long period of time, it will be-  
come very hot resulting in possible  
damage to the LCD screen. When not  
using this unit, close the display and avoid  
exposing it to direct sunlight.  
The display should be used within the tem-  
perature ranges shown below.  
Operating temperature range: +14 to +122  
°F  
Storage temperature range: -4 to +176 °F  
At temperatures higher or lower than the  
operating temperature range the display  
may not operate normally.  
The LCD screen of this unit is exposed in  
order to increase its visibility within the ve-  
hicle. Please do not press strongly on it as  
this may damage it.  
Do not place anything on the display when  
it is opened. Also, do not attempt to carry  
out angle adjustment, or open/close the  
display by hand. Applying strong force to  
the display may damage it.  
Notes  
!
!
This unit assigns folder numbers. The user  
can not assign folder numbers.  
!
It is not possible to check folders that do not  
include MP3/WMA files. (These folders will be  
skipped without displaying the folder number.)  
MP3/WMA files in up to 8 tiers of folders can  
be played back. However, there is a delay in  
the start of playback on discs with numerous  
tiers. For this reason we recommend creating  
discs with no more than 2 tiers.  
!
!
!
!
It is possible to play back up to 253 items from  
folders on one disc.  
Using the display correctly  
CAUTION  
!
If liquid or foreign matter should get inside  
this unit, turn off the power immediately and  
consult your dealer or the nearest authorized  
PIONEER Service Station. Do not use the unit  
in this condition because doing so may result  
in a fire, electric shock, or other failure.  
If you notice smoke, a strange noise or smell,  
or any other abnormal signs from the display,  
turn off the power immediately and consult  
your dealer or the nearest authorized PIO-  
NEER Service Station. Using this unit in this  
condition may result in permanent damage to  
the system.  
!
!
Do not push the LCD screen with much  
force as this may scratch it.  
Be careful not to place anything between  
the display and the main body when the  
display is opening or closing. If an object  
gets between the display and main body,  
the display may stop working.  
Be careful of fingers, long hair, and loose  
articles of clothing which could possibly  
get caught between the display and the  
main body and cause serious injury.  
!
!
!
Do not disassemble or modify this unit, as  
there are high-voltage components inside  
which may cause an electric shock. Be sure  
to consult your dealer or the nearest author-  
ized PIONEER Service Station for internal in-  
spection, adjustments or repairs.  
105  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Appendix  
AdditionalInformation  
The fluorescent tube should last for ap-  
proximately 10,000 hours, depending on  
operating conditions. (Using the display  
at low temperatures reduces the service  
life of the fluorescent tube.)  
When the fluorescent tube reaches the  
end of its useful life, the screen will be  
dark and the image will no longer be  
projected. If this happens, consult your  
dealer or the nearest authorized PIO-  
NEER Service Station.  
Liquid crystaldisplay (LCD) screen  
!
If the display is near the vent of an air con-  
ditioner when it is opened, make sure that  
air from the air conditioner is not blowing  
on it. Heat from the heater may damage  
the LCD screen, and cool air from the cool-  
er may cause moisture to form inside the  
display resulting in possible damage. Also,  
if the display is cooled down by the cooler,  
the screen may become dark, or the life  
span of the small fluorescent tube used in-  
side the display may be shortened.  
Small black dots or white dots (bright dots)  
may appear on the LCD screen. These are  
due to the characteristics of the LCD  
screen and do not indicate a problem with  
the display.  
!
!
At low temperatures, the LCD screen may  
be dark for a while after the power is turned  
on.  
!
!
The LCD screen will be difficult to see if it is  
exposed to direct sunlight.  
When using a portable phone, keep the an-  
tenna of the portable phone away from the  
display to prevent disruption of the video by  
the appearance of spots, colored stripes,  
etc.  
Keeping the display in good  
condition  
!
When removing dust from the screen or  
cleaning the display, first turn the system  
power off, then wipe with the supplied  
cloth.  
!
When wiping the screen, take care not to  
scratch the surface. Do not use harsh or  
abrasive chemical cleaners.  
Small fluorescent tube  
!
A small fluorescent tube is used inside the  
display to illuminate the LCD screen.  
106  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Appendix  
AdditionalInformation  
Language code chart for DVD  
Language (code), input code  
Japanese (ja), 1001  
English (en), 0514  
French (fr), 0618  
Spanish (es), 0519  
German (de), 0405  
Italian (it), 0920  
Language (code), input code  
Language (code), input code  
Pashto, Pushto (ps), 1619  
Quechua (qu), 1721  
Rhaeto-Romance (rm), 1813  
Kirundi (rn), 1814  
Romanian (ro), 1815  
Kinyarwanda (rw), 1823  
Sanskrit (sa), 1901  
Sindhi (sd), 1904  
Sangho (sg), 1907  
Serbo-Croatian (sh), 1908  
Sinhalese (si), 1909  
Slovak (sk), 1911  
Slovenian (sl), 1912  
Samoan (sm), 1913  
Shona (sn), 1914  
Somali (so), 1915  
Albanian (sq), 1917  
Serbian (sr), 1918  
Siswati (ss), 1919  
Sesotho (st), 1920  
Sundanese (su), 1921  
Swahili (sw), 1923  
Tamil (ta), 2001  
Guarani (gn), 0714  
Gujarati (gu), 0721  
Hausa (ha), 0801  
Hindi (hi), 0809  
Croatian (hr), 0818  
Hungarian (hu), 0821  
Armenian (hy), 0825  
Interlingua (ia), 0901  
Interlingue (ie), 0905  
Inupiak (ik), 0911  
Indonesian (in), 0914  
Icelandic (is), 0919  
Hebrew (iw), 0923  
Yiddish (ji), 1009  
Javanese (jw), 1023  
Georgian (ka), 1101  
Kazakh (kk), 1111  
Greenlandic (kl), 1112  
Cambodian (km), 1113  
Kannada (kn), 1114  
Kashmiri (ks), 1119  
Kurdish (ku), 1121  
Kirghiz (ky), 1125  
Latin (la), 1201  
Lingala (ln), 1214  
Laothian (lo), 1215  
Lithuanian (lt), 1220  
Latvian (lv), 1222  
Malagasy (mg), 1307  
Maori (mi), 1309  
Macedonian (mk), 1311  
Malayalam (ml), 1312  
Mongolian (mn), 1314  
Moldavian (mo), 1315  
Marathi (mr), 1318  
Malay (ms), 1319  
Maltese (mt), 1320  
Burmese (my), 1325  
Nauru (na), 1401  
Chinese (zh), 2608  
Dutch (nl), 1412  
Portuguese (pt), 1620  
Swedish (sv), 1922  
Russian (ru), 1821  
Korean (ko), 1115  
Greek (el), 0512  
Afar (aa), 0101  
Abkhazian (ab), 0102  
Afrikaans (af), 0106  
Amharic (am), 0113  
Arabic (ar), 0118  
Assamese (as), 0119  
Aymara (ay), 0125  
Azerbaijani (az), 0126  
Bashkir (ba), 0201  
Byelorussian (be), 0205  
Bulgarian (bg), 0207  
Bihari (bh), 0208  
Bislama (bi), 0209  
Bengali (bn), 0214  
Tibetan (bo), 0215  
Breton (br), 0218  
Catalan (ca), 0301  
Corsican (co), 0315  
Czech (cs), 0319  
Telugu (te), 2005  
Tajik (tg), 2007  
Thai (th), 2008  
Tigrinya (ti), 2009  
Turkmen (tk), 2011  
Tagalog (tl), 2012  
Setswana (tn), 2014  
Tonga (to), 2015  
Turkish (tr), 2018  
Tsonga (ts), 2019  
Tatar (tt), 2020  
Welsh (cy), 0325  
Danish (da), 0401  
Bhutani (dz), 0426  
Esperanto (eo), 0515  
Estonian (et), 0520  
Basque (eu), 0521  
Persian (fa), 0601  
Finnish (fi), 0609  
Fiji (fj), 0610  
Faroese (fo), 0615  
Frisian (fy), 0625  
Twi (tw), 2023  
Ukrainian (uk), 2111  
Urdu (ur), 2118  
Uzbek (uz), 2126  
Vietnamese (vi), 2209  
Volapük (vo), 2215  
Wolof (wo), 2315  
Xhosa (xh), 2408  
Yoruba (yo), 2515  
Zulu (zu), 2621  
Nepali (ne), 1405  
Norwegian (no), 1415  
Occitan (oc), 1503  
Oromo (om), 1513  
Oriya (or), 1518  
Irish (ga), 0701  
Scots-Gaelic (gd), 0704  
Galician (gl), 0712  
Panjabi (pa), 1601  
Polish (pl), 1612  
107  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Appendix  
AdditionalInformation  
the year of production, comments and other  
data. The contents can be freely edited using  
software with ID3 Tag editing functions.  
Although the tags are restricted as to the num-  
ber of characters, the information can be  
viewed when the track is played back.  
Terms  
Aspect ratio  
This is the width-to-height ratio of a TV screen.  
A regular display has an aspect ratio of 4:3.  
Wide screen displays have an aspect ratio of  
16:9, providing a bigger picture for exceptional  
presence and atmosphere.  
ISO9660 format  
This is the international standard for the for-  
mat logic of CD-ROM folders and files. For the  
ISO9660 format, there are regulations for the  
following two levels.  
Bit rate  
This expresses data volume per second, or bps  
units (bits per second). The higher the rate,  
the more information is available to reproduce  
the sound. Using the same encoding method  
(such as MP3), the higher the rate, the better  
the sound.  
Level1:  
The file name is in 8.3 format (the name con-  
sists of up to 8 characters, half-byte English  
capital letters and half-byte numerals and the  
_sign, with a file-extension of three charac-  
ters.)  
Chapter  
DVD titles are in turn divided into chapters  
which are numbered in the same way as the  
chapters of a book. With DVD video discs fea-  
turing chapters, you can quickly find a desired  
scene with chapter search.  
Level2:  
The file name can have up to 31 characters (in-  
cluding the separation mark .and a file ex-  
tension). Each folder contains less than 8  
hierarchies.  
Extended formats  
Joliet:  
File names can have up to 64 characters.  
Romeo:  
File names can have up to 128 characters.  
Dolby Digital  
Dolby Digital provides multi-channel audio  
from up to 5.1 independent channels. This is  
the same as the Dolby Digital surround sound  
system used in theaters.  
Linear PCM (LPCM)/Pulse code  
modulation  
This stands for linear pulse code modulation,  
which is the signal recording system used for  
music CDs and DVDs. Generally, DVDs are re-  
corded with higher sampling frequency and  
bit rate than CDs. Therefore, DVDs can provide  
higher sound quality.  
DTS  
This stands for Digital Theater Systems. DTS is  
a surround system delivering multi-channel  
audio from up to 6 independent channels.  
m3u  
Playlists created using the WINAMPsoft-  
ware have a playlist file extension (.m3u).  
ID3 tag  
This is a method of embedding track-related  
information in an MP3 file. This embedded in-  
formation can include the track title, the ar-  
tists name, the album title, the music genre,  
MP3  
MP3 is short for MPEGAudio Layer 3. It is an  
audio compression standard set by a working  
108  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Appendix  
AdditionalInformation  
group (MPEG) of the ISO (International Stan-  
dards Organization). MP3 is able to compress  
audio data to about 1/10th the level of a con-  
ventional disc.  
input is designed to transmit and receive digi-  
tal signals optically.  
Packet write  
This is a general term for a method of writing  
on CD-R, etc., at the time required for a file,  
just as is done with files on floppy or hard  
discs.  
MPEG  
This stands for Moving Pictures Experts  
Group, and is an international video image  
compression standard. Some DVDs feature di-  
gital audio compressed and recorded using  
this system.  
Parentallock  
Some DVD video discs with violent or adult-or-  
iented scenes feature parental lock which pre-  
vents children from viewing such scenes. With  
this kind of disc, if you set the units parental  
lock level, playback of scenes inappropriate for  
children will be disabled, or these scenes will  
be skipped.  
Multi-angle  
With regular TV programs, although multiple  
cameras are used to simultaneously shoot  
scenes, only images from one camera at a  
time are transmitted to your TV. Some DVDs  
feature scenes shot from multiple angles, let-  
ting you choose your viewing angle as desired.  
Playback control (PBC)  
This is a playback control signal recorded on  
Video CDs (Version 2.0). Using menu displays  
provided by Video CDs with PBC lets you enjoy  
playback of simple interactive software and  
software with search functions. You can also  
enjoy viewing high- and standard-resolution  
still images.  
Multi-audio (Multilingual dialog)  
Some DVDs feature dialog recorded in multi-  
ple languages. Dialog in up to 8 languages  
can be recorded on a single disc, letting you  
choose as desired.  
Multi-session  
Multi-session is a recording method that al-  
lows additional data to be recorded later.  
When recording data on a CD-ROM, CD-R or  
CD-RW, etc., all data from beginning to end is  
treated as a single unit or session. Multi-ses-  
sion is a method of recording more than 2 ses-  
sions on one disc.  
Region number  
DVD players and DVD discs feature region  
numbers indicating the area in which they  
were purchased. Playback of a DVD is not pos-  
sible unless it features the same region num-  
ber as the DVD player. This units region  
number is displayed on the bottom of the unit.  
Multi-subtitle  
Title  
Subtitles in up to 32 languages can be re-  
corded on a single DVD, letting you choose as  
desired.  
DVD video discs have high data capacity, en-  
abling recording of multiple movies on a sin-  
gle disc. If, for example, one disc contains  
three separate movies, they are divided into  
title 1, title 2 and title 3. This lets you enjoy the  
convenience of title search and other func-  
tions.  
Opticaldigitaloutput/input  
By transmitting and receiving audio signals in  
a digital signal format, the chance of sonic  
quality deteriorating in the course of transmis-  
sion is minimized. An optical digital output/  
109  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Appendix  
AdditionalInformation  
VBR  
VBR is short for variable bit rate. Generally  
speaking CBR (constant bit rate) is more  
widely used. But by flexibly adjusting the bit  
rate according to the needs of audio compres-  
sion, it is possible to achieve compression-  
priority sound quality.  
WMA  
WMA is short for Windows Media" Audio  
and refers to an audio compression technol-  
ogy that is developed by Microsoft Corpora-  
tion. WMA data can be encoded by using  
Windows Media Player version 7 or later.  
Microsoft, Windows Media, and the Windows  
logo are trademarks, or registered trademarks  
of Microsoft Corporation in the United States  
and/or other countries.  
110  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Appendix  
AdditionalInformation  
Specifications  
Load impedance ...................... 4 W (4 8 W [2 W for 1 ch] al-  
lowable)  
Preout max output level/output impedance  
..................................................... 4.0 V/100 W  
Equalizer (3-Band Parametric Equalizer):  
Low  
General  
Power source ............................. 14.4 V DC (10.8 15.1 V al-  
lowable)  
Grounding system ................... Negative type  
Head unit:  
Frequency ................ 40/80/100/160 Hz  
Q Factor .................... 0.35/0.59/0.95/1.15 (+6 dB  
when boosted)  
Max. current consumption  
........................................... 10.0 A  
Dimensions (W × H × D):  
DIN  
Gain ............................ ±12dB  
Mid  
Frequency ................ 200/500/1k/2k Hz  
Q Factor .................... 0.35/0.59/0.95/1.15 (+6 dB  
when boosted)  
Chassis ..................... 178 × 50 × 160 mm  
(7 × 2 × 6-1/4 in.)  
Nose ........................... 188 × 58 × 36 mm  
(7-3/8 × 2-1/4 × 1-3/8 in.)  
D
Gain ............................ ±12dB  
High  
Frequency ................ 3.15k/8k/10k/12.5k Hz  
Q Factor .................... 0.35/0.59/0.95/1.15 (+6 dB  
when boosted)  
Chassis ..................... 178 × 50 × 165 mm  
(7 × 2 × 6-1/2 in.)  
Nose ........................... 170 × 46 × 31 mm  
(6-3/4 × 1-3/4 × 1-1/4 in.)  
Weight ................................ 2.3 kg (4.8 lbs)  
Hideaway unit:  
Gain ............................ ±12dB  
Loudness contour  
Low ....................................... +3.5 dB (100 Hz), +3 dB (10  
kHz)  
Mid ....................................... +10 dB (100 Hz), +6.5 dB  
(10 kHz)  
High ..................................... +11 dB (100 Hz), +11 dB  
(10 kHz)  
Max. current consumption  
........................................... 1.0 A  
Dimensions (W × H × D)  
........................................... 150 × 28 × 100 mm  
(5-7/8 × 1-1/8 × 3-7/8 in.)  
Weight ................................ 0.4 kg (0.7 lbs)  
(volume: 30 dB)  
Tone controls:  
Bass  
Display  
Frequency ................ 40/63/100/160 Hz  
Gain ............................ ±12dB  
Treble  
Screen size/aspect ratio ....... 6.5 inch wide/16:9  
(effective display area: 144  
× 77 mm)  
Frequency ................ 2.5k/4k/6.3k/10k Hz  
Gain ............................ ±12dB  
HPF:  
Frequency .......................... 50/80/125 Hz  
Slope .................................... 12 dB/oct  
Subwoofer:  
Pixels ............................................. 336,960 (1,440 × 234)  
Type ................................................ TFT active matrix, transmis-  
sive type  
Color system .............................. NTSC compatible  
Operating temperature range  
..................................................... +14 +122 °F  
Storage temperature range  
..................................................... -4 +176 °F  
Angle adjustment .................... 50 110°  
(initial settings: 110°)  
Frequency .......................... 50/80/125 Hz  
Slope .................................... 18 dB/oct  
Gain ...................................... ±12dB  
Phase .................................. Normal/Reverse  
DVD Player  
System .......................................... DVD video, Video CD, Com-  
pact disc audio system  
Usable discs .............................. DVD video, Video CD, Com-  
pact disc  
Region number ........................ 1  
Signal format:  
Audio  
Continuous power output is 22 W per channel minimum  
into 4 ohms, both channels driven 50 to 15,000 Hz with  
no more than 5% THD.  
Maximum power output ....... 50 W × 4  
50 W × 2/4 W + 70 W × 1/2  
W (for subwoofer)  
Sampling frequency ..... 44.1/48/96 kHz  
111  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Appendix  
AdditionalInformation  
Number of quantization bits  
........................................... 16/20/24; linear  
Frequency response ............... 5 44,000 Hz (with DVD, at  
sampling frequency 96 kHz)  
Signal-to-noise ratio ............... 97 dB (1 kHz) (IHF-A net-  
work)  
(CD: 96 dB (1 kHz) (IHF-A  
network))  
Dynamic range ......................... 95 dB (1 kHz)  
(CD: 94 dB (1 kHz))  
Distortion ..................................... 0.008 % (1 kHz)  
Output level:  
Video .................................... 1.0 Vp-p/75 W (±0.2 V)  
Audio ................................... 1.0 V (1 kHz, 0 dB)  
Number of channels .............. 2 (stereo)  
MP3 decoding format ........... MPEG-1 & 2 Audio Layer 3  
WMA decoding format ......... Ver. 7 & 8  
FM tuner  
Frequency range ...................... 87.9 107.9 MHz  
Usable sensitivity ..................... 8 dBf (0.7 µV/75 W, mono,  
S/N: 30 dB)  
50 dB quieting sensitivity ..... 10 dBf (0.9 µV/75 W, mono)  
Signal-to-noise ratio ............... 75 dB (IHF-A network)  
Distortion ..................................... 0.3 % (at 65 dBf, 1 kHz,  
stereo)  
0.1 % (at 65 dBf, 1 kHz,  
mono)  
Frequency response ............... 30 15,000 Hz (±3 dB)  
Stereo separation .................... 45 dB (at 65 dBf, 1 kHz)  
Selectivity .................................... 80 dB (±200 kHz)  
Three-signal intermodulation (desired signal level)  
..................................................... 30 dBf (two undesired sig-  
nal level: 100 dBf)  
AM tuner  
Frequency range ...................... 530 1,710 kHz (10 kHz)  
Usable sensitivity ..................... 18 µV (S/N: 20 dB)  
Signal-to-noise ratio ............... 65 dB (IHF-A network)  
Note  
Specifications and the design are subject to pos-  
sible modifications without notice due to im-  
provements.  
112  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Index  
A
S
Angle icon ..................................................37,.86  
Aspect ratio .............................................86,.108  
Audio language .........................................36,.85  
Subtitle language ......................................36,.84  
T
Title .................................................................109  
TV aspect ..........................................................86  
B
Bookmark .........................................................37  
Brightness ........................................................26  
V
Video CD ............................................................9  
C
Chapter ...........................................................108  
Code number ...................................................86  
Color .................................................................26  
Contrast ............................................................26  
W
Wide screen mode ..........................................25  
D
Direct search ...................................................36  
Dolby Digital ............................................12,.108  
DTS ...........................................................12,.108  
H
Hue ...................................................................26  
L
Language code chart ...................................107  
Linear PCM (LPCM) ......................................108  
M
Menu language ...............................................85  
MPEG............................................................. .109  
Multi-angle ...............................................37,.109  
Multi-audio ...............................................36,.109  
Multi-subtitle ............................................36,.109  
O
Optical digital output/input .........................109  
P
Parental lock ............................................86,.109  
PBC (playback control) ..................................38  
Playback control (PBC) ................................109  
R
Region number .........................................9,.109  
113  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
PIONEER CORPORATION  
4-1, MEGURO 1-CHOME, MEGURO-KU, TOKYO 153-8654, JAPAN  
PIONEER ELECTRONICS (USA) INC.  
P.O. Box 1540, Long Beach, California 90801-1540, U.S.A.  
TEL: (800) 421-1404  
PIONEER EUROPE NV  
Haven 1087, Keetberglaan 1, B-9120 Melsele, Belgium  
TEL: (0) 3/570.05.11  
PIONEER ELECTRONICS ASIACENTRE PTE. LTD.  
253 Alexandra Road, #04-01, Singapore 159936  
TEL: 65-6472-1111  
PIONEER ELECTRONICS AUSTRALIA PTY. LTD.  
178-184 Boundary Road, Braeside, Victoria 3195, Australia  
TEL: (03) 9586-6300  
PIONEER ELECTRONICS OF CANADA, INC.  
300 Allstate Parkway, Markham, Ontario L3R OP2, Canada  
TEL: (905) 479-4411  
PIONEER ELECTRONICS DE MEXICO, S.A. de C.V.  
Blvd.Manuel Avila Camacho 138 10 piso  
Col.Lomas de Chapultepec, Mexico, D.F. 11000  
TEL: 55-9178-4270  
HÒ¡ýÉPlø  
=lø : ðꢀÂ-q44_13  
ûq : (02) 2521-3588  
HÒûPÈ/ÉÉPlø  
/]w/ÎLFm-à  
9901-6¤  
Published by Pioneer Corporation.  
Copyright © 2004 by Pioneer Corporation.  
All rights reserved.  
ûq : (0852) 2848-6488  
Printed in Japan  
<KSNZX> <04B00000>  
<CRB1927-A> UC  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Pelco Computer Drive 06 User Manual
Philips Car Video System 200VW8 User Manual
Philips Cassette Player AW 7890 User Manual
Philips Recording Equipment HQ9170 User Manual
Philips Speaker 223 User Manual
Philips Washer 52PFL5704D User Manual
Pioneer MP3 Player DEH 3770MP User Manual
Porter Cable Air Compressor C2002 User Manual
Poulan Tiller PRRT875X User Manual
ProForm Home Gym PFEL51053 User Manual