Pioneer Blu ray Player BDP 95FD User Manual

Operating Instructions  
Blu-ray Disc PLAYER  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CAUTION  
The following caution label appears on your unit.  
Location: inside of the unit  
This product is a class 1 laser product, but this  
product contains a laser diode higher than Class 1.  
To ensure continued safety, do not remove any covers  
or attempt to gain access to the inside of the product.  
Refer all servicing to qualified personnel.  
D3-4-2-1-8_B_En  
Operating Environment  
ꢀꢁꢂꢃꢄꢃꢅ  
ꢀ#ꢁ$ꢂ&ꢃ!ꢄꢁ!(ꢃ$"! ꢁ!&&ꢁ #ꢁ$ꢂ&'$ꢁꢂ!ꢅꢆ' ꢃꢅꢃ&*ꢇ  
ꢈꢉ+ꢊ&"ꢈꢋꢉ+ꢊꢌꢈ +ꢎ&"ꢈꢏꢉ+ꢎꢐꢑꢒꢁ%%&ꢆꢂ!ꢓꢉꢔꢕꢖ  
ꢌꢗ""ꢒꢃ!ꢄ(ꢁ!&%!"&ꢘꢒ"ꢗꢙꢁꢅꢐ  
"ꢇ#%ꢈ)ꢈ!'ꢇꢉꢇꢊꢋ%ꢈꢇꢌꢉ+ꢉ%ꢍꢎꢇꢍ"ꢇ!"'ꢇ#ꢏꢉꢐꢈꢇꢉ!*ꢇ!ꢉꢑꢈꢍꢇ  
ꢊꢏꢉ ꢈꢇ&"(%ꢐꢈ&ꢇꢒ&(ꢐꢌꢇꢉ&ꢇꢉꢇꢏꢋꢓꢌ'ꢈꢍꢇꢐꢉ!ꢍꢏꢈꢔꢇ"!ꢇ'ꢌꢈꢇ  
ꢈ$(ꢋ# ꢈ!'ꢕꢇ    
ꢗꢘꢗꢙꢗꢚꢗꢛꢉꢜꢁꢜꢝ!  
ꢚ"!"&ꢃ!%&ꢂꢒꢒ&ꢆꢃ%'!ꢃ&ꢃ!#""$ꢒ*(ꢁ!&ꢃꢒꢂ&ꢁꢅꢂ$ꢁꢂꢛ"$ꢃ!  
ꢒ"ꢗꢂ&ꢃ"!%ꢁ)#"%ꢁꢅ&"ꢆꢃꢄꢆꢆ' ꢃꢅꢃ&*"$ꢅꢃ$ꢁꢗ&%'!ꢒꢃꢄꢆ&ꢌ"$  
%&$"!ꢄꢂ$&ꢃꢜꢃꢗꢃꢂꢒꢒꢃꢄꢆ&ꢐ  
D3-4-2-1-7c_A_En  
WARNING  
This equipment is not waterproof. To prevent a fire  
or shock hazard, do not place any container filled  
with liquid near this equipment (such as a vase or  
flower pot) or expose it to dripping, splashing, rain  
ꢀꢁꢂꢃꢄꢅꢆꢃꢄꢇꢂꢈꢆꢉꢃꢄꢇꢂ  
ꢊ$!)%)./ꢋ''%)#ꢇ/$%.ꢇ0)%/ꢎꢇ(ꢋ&!ꢇ.0-!ꢇ/*'!ꢋ1!ꢇ.+ꢋꢌ!  
-*0) ꢇ/$!ꢇ0)%/ꢇ"*-ꢇ1!)/%'ꢋ/%*)ꢇ/*%(+-*1!$!ꢋ/ꢇ  
-ꢋ %ꢋ/%*)ꢇꢒ/ꢇ'!ꢋ./ꢇꢍꢎꢌ(/ꢇ/*+ꢎꢇꢍꢎꢌ(/ꢇ-!ꢋ-ꢋ)  
ꢍꢎꢌ(/ꢇ!ꢋꢌ$ꢇ.% !ꢔꢕ  
or moisture.  
D3-4-2-1-3_B_En  
ꢊꢆꢏꢂꢄꢂꢐ  
ꢁꢂꢃꢂꢄ  
ꢑ'*/.ꢇꢋ) *+!)%)#.ꢇ%)ꢇ/$!ꢌꢋꢒ%)!/ꢇ-!+-*1% ! "*-ꢇ  
1!)/%'ꢋ/%*)ꢇ/*!).0-!ꢇ-!'%ꢋꢒ'!*+!-/%*)*"ꢇ/$!  
+-* 0/ꢎꢇꢋ) ꢇ/*+-*/!ꢌ/ꢇ%/ꢇ"-*(*1!-$!ꢋ/%)#ꢕꢇ*  
+-!1!)/ꢇ"%-!$ꢋ4- ꢎꢇ/$!*+!)%)#.ꢇ.$*0' )!1!-ꢇꢒ!  
ꢒ'*ꢌ&! *-ꢇꢌ*1!-! ꢇ2%/$%/!(.ꢇꢒ.0ꢌ$.ꢇ)!2.+ꢋ+!-.ꢎꢇ  
/ꢋꢒ'!ꢌ'*/$.ꢎꢇ0-/ꢋ%).ꢔꢇ*-ꢇ3ꢇ*+!-/%)#ꢇ/$!  
ꢃ ꢇꢀꢁꢂꢃꢄꢅꢅꢆꢇꢅꢆꢇ ꢈꢀꢉꢊꢁ ꢆꢀꢋꢉꢉꢆꢌꢁꢍꢀꢁꢎꢏꢉꢊꢁ ꢈꢃꢃꢈꢐꢆꢇꢅ  
ꢋꢁꢑꢉꢆꢈꢇꢑꢎꢀꢁ ꢄꢃꢃꢒꢓ  
ꢅꢆꢇ+$!)ꢈꢉꢇ$ꢊ)ꢆꢇꢈ+ꢈ !ꢈꢋ!ꢇ%$,ꢇ'(*%%!-ꢌ ꢊꢊꢇ'(  
ꢈꢍꢍ$'ꢌ #ꢉ)$ꢍ$*#)'-$''ꢇꢉ $#ꢕꢇꢎꢇ(*'ꢇ)ꢆꢈ))ꢆꢇ  
%$,ꢇ'(*%%!-+$!)ꢈꢉꢇ$ꢊ)ꢆꢇꢈ'ꢇꢈ,ꢆꢇ'ꢇ)ꢆ (*# )  
, !!ꢋꢇ*(ꢇꢌ"ꢇꢇ)()ꢆꢇ'ꢇ&* 'ꢇꢌ+$!)ꢈꢉꢇꢇꢒꢕꢎꢇ ꢏꢐ  
3
En  
!,0%+(!)/ꢇ*)ꢇ/$%ꢌ&ꢌꢋ-+!/ꢇ*-ꢇꢒ!  
ꢓꢔ ꢖꢒꢗꢆꢗꢁ)  
$' ꢔꢇ,' ))ꢇ#$#)ꢆꢇ'ꢇꢈ'%ꢈ#ꢇ!ꢕꢇ  
ꢓꢏ ꢔꢕꢕꢖ#  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ꢁꢑꢀꢁꢂꢃ ꢄꢅꢆꢇꢈꢉꢊ ꢋꢉꢇꢌꢅꢍꢊꢋꢅꢇꢎꢏꢇꢐꢈꢇꢈꢍꢀꢁ  
ꢅ ꢇꢃꢍꢇ$ꢅ "ꢏꢋꢇꢇꢅ ꢊꢍꢑꢇꢈꢍꢂꢃ ꢄꢎ ꢊꢇꢒꢍꢓꢍꢎꢅ!ꢍꢌ  
ꢏꢋꢌꢏꢂꢂꢓꢅꢂꢓꢉꢏꢇꢍꢅꢋꢍꢆꢉꢇꢇꢍꢌꢔꢕꢍꢂꢃꢏꢐꢍꢎꢍꢋꢇꢏꢋꢌ  
ꢎꢅ ꢋꢇꢉꢋꢄꢅꢆꢏꢋꢀꢁꢂꢃ ꢄꢅꢋꢇꢈꢍꢂꢅ"ꢍꢓꢊ ꢂꢂꢃ$ꢐꢅꢓꢌꢅꢆ  
ꢇꢈꢉꢊ ꢋꢉꢇꢊꢈꢅ ꢃꢌꢒꢍꢂꢍꢓꢆꢅꢓꢎꢍꢌꢅꢋꢃ$ꢒ$ꢖ ꢏꢃꢉꢆꢉꢍꢌ  
ꢊꢍꢓ!ꢉꢐꢍꢂꢍꢓꢊꢅꢋꢋꢍꢃꢔ ꢐꢅꢋꢋꢍꢐꢇꢍꢌꢇꢅꢏꢋꢀꢁꢅ ꢇꢃꢍꢇꢑꢇꢈꢍ  
ꢐ ꢇꢗꢅꢆꢆꢂꢃ ꢄꢐꢏꢋꢐꢏ ꢊꢍꢊꢍ!ꢍꢓꢍꢍꢃꢍꢐꢇꢓꢉꢐꢏꢃꢊꢈꢅꢐꢘꢔꢙꢏꢘꢍ  
ꢊ ꢓꢍꢉꢇꢉꢊꢂꢓꢅꢂꢍꢓꢃ$ꢌꢉꢊꢂꢅꢊꢍꢌꢅꢆꢏꢆꢇꢍꢓꢓꢍꢎꢅ!ꢏꢃꢔ  
ꢀꢁꢂꢃꢄꢅꢆꢇꢈꢉꢊꢂꢃꢋꢆꢅꢌꢍꢎꢍꢅꢏꢐꢁꢆꢈꢃꢍꢁꢆꢐꢇꢄꢈꢅꢄꢆꢃꢍꢃꢑꢒꢎꢓ  
ꢋꢏꢂꢐꢈꢅꢍꢇꢈꢍꢊꢆꢈꢃꢍꢋꢆꢅꢆꢊꢁꢍꢅꢊꢁꢏꢎꢁꢆꢈꢃꢍꢁꢆꢐꢇꢄꢈꢅꢄꢆꢃꢍꢃ  
ꢔꢃꢈꢉꢁꢏꢃꢐꢆꢎꢌꢕꢊꢍꢅꢖꢈꢃꢍꢋꢆꢅ ꢈꢃꢂꢎꢍꢃꢃꢄꢈꢅꢄꢆꢃꢍꢃꢂꢎ  
ꢅꢍꢃꢊꢏꢈꢅꢏꢎꢊꢆꢅꢈꢃꢍꢂꢎꢉꢏꢅꢆꢅꢃꢁꢂꢄꢗꢏꢎꢇꢘꢁꢂꢉꢁ  
ꢅꢍꢙꢈꢂꢅꢍꢃꢅꢍꢄꢏꢂꢅꢘꢂꢐꢐ ꢉꢁꢏꢅꢌꢍꢇꢋꢆꢅꢍꢚꢍꢎꢇꢈꢅꢂꢎꢌꢊꢁꢍ  
ꢘꢏꢅꢅꢏꢎꢊꢓꢄꢍꢅꢂꢆꢇꢑ  
ꢀꢁꢂꢃꢄꢅꢆ  
ꢀ ꢁꢂꢃꢄꢅ ꢃꢆꢅꢇꢈꢉꢊ ꢋ  
ꢚꢈꢍꢍꢖ ꢉꢂꢎꢍꢋꢇꢊꢈꢅ ꢃꢌꢒꢍꢌꢉꢊꢐꢅꢋꢋꢍꢐꢇꢍꢌꢒ$ꢓꢍꢎꢅ!ꢉꢋꢄ  
ꢇꢈꢍꢎꢏꢉꢋꢊꢂꢃ ꢄꢆꢓꢅꢎꢇꢈꢍ"ꢏꢃꢃꢊꢅꢐꢘꢍꢇ"ꢈꢍꢋꢃꢍꢆꢇ  
 ꢋ ꢊꢍꢌꢆꢅꢓꢃꢅꢋꢄꢂꢍꢓꢉꢅꢌꢅꢆꢇꢉꢎꢍꢛꢆꢅꢓꢍ#ꢏꢎꢂꢃꢍꢑ"ꢈꢍꢋ  
ꢀꢁꢂꢃꢄꢅꢆꢇꢅꢈꢉ ꢅꢊꢋꢉꢊꢃꢌ!ꢆꢇꢅꢈꢄꢍꢎꢏꢀꢒꢂꢉꢆꢈꢍꢄꢄꢉꢍꢆꢆꢇꢅ  
ꢈꢄꢍꢎꢌ!ꢆꢍꢎꢎꢐꢂꢎꢆꢇꢅꢋꢉꢊꢃꢁꢂꢃꢂꢅꢑꢅꢊꢆꢉꢍꢋꢇꢆꢇꢅꢈꢉ ꢅꢊ  
ꢋꢉꢊꢃ ꢇꢅꢂ!ꢉꢍꢊꢇꢁꢂꢃꢒꢁꢊꢅ ꢅꢆꢁꢒꢆꢇꢐꢒꢋꢉꢍꢄꢃꢋꢁꢍꢒꢅ  
ꢒꢇꢉꢊꢆꢋꢐꢊꢋꢍꢐꢆꢉꢊꢅꢄꢅꢋꢆꢊꢐꢋꢒꢇꢉꢋꢓꢏꢀꢒꢂꢉꢆꢈꢄꢁꢋꢅꢆꢇꢅꢍꢂꢐꢆꢔ  
ꢈꢐꢅꢋꢅꢉꢕꢕꢍꢊꢂꢐꢆꢍꢊꢅꢔꢅꢆꢋꢏꢔꢉꢂꢆꢇꢅꢈꢉ ꢅꢊꢋꢉꢊꢃꢔꢉꢊꢈꢐꢂꢋꢇꢆꢇꢅ  
ꢋꢉꢊꢃꢏ ꢅꢑꢅꢊꢖꢁꢓꢅꢓꢂꢉꢆꢐꢂꢆꢇꢅꢋꢉꢊꢃꢉꢊꢆꢐꢅꢐꢆ ꢐꢆꢇꢉꢆꢇꢅꢊ  
ꢋꢉꢊꢃꢒꢏꢗꢇꢅꢈꢉ ꢅꢊꢋꢉꢊꢃꢒꢒꢇꢉꢍꢄꢃꢌꢅꢊꢉꢍꢆꢅꢃꢒꢍꢋꢇꢆꢇꢁꢆꢆꢇꢅ!  
ꢁꢊꢅꢂꢉꢆꢄꢐꢓꢅꢄ!ꢆꢉꢌꢅꢒꢆꢅꢈꢈꢅꢃꢉꢂꢏꢃꢁꢖꢁꢎꢅꢃꢈꢉ ꢅꢊꢋꢉꢊꢃ  
ꢋꢁꢂꢋꢁꢍꢒꢅꢕꢐꢊꢅꢉꢊꢎꢐꢑꢅ!ꢉꢍꢁꢂꢅꢄꢅꢋꢆꢊꢐꢋꢁꢄꢒꢇꢉꢋꢓꢏꢀꢑꢇꢅꢋꢓ  
ꢆꢇꢅꢈꢉ ꢅꢊꢋꢉꢊꢃꢉꢂꢋꢅꢐꢂ ꢇꢐꢄꢅꢏꢙꢕ!ꢉꢍꢕꢐꢂꢃꢐꢆꢃꢁꢖꢁꢎꢅꢃꢔ  
ꢋꢉꢂꢆꢁꢋꢆꢆꢇꢅꢚꢐꢉꢂꢅꢅꢊꢒꢅꢊꢑꢐꢋꢅꢋꢅꢂꢆꢅꢊꢉꢂꢆꢇꢅꢌꢁꢋꢓꢋꢉꢑꢅꢉꢊ  
!ꢉꢍꢊꢃꢅꢁꢄꢅꢊꢕꢉꢊꢊꢅꢈꢄꢁꢋꢅꢖꢅꢂꢆꢏ  
ꢅꢋ!ꢏꢐꢏꢇꢉꢅꢋꢜꢔ  
ꢅꢂꢄ ꢅꢉ  
CAUTION  
The ꢀꢁSTANDBY/ON switch on this unit will not  
completely shut off all power from the AC outlet.  
Since the power cord serves as the main disconnect  
device for the unit, you will need to unplug it from  
the AC outlet to shut down all power. Therefore,  
make sure the unit has been installed so that the  
power cord can be easily unplugged from the AC  
outlet in case of an accident. To avoid fire hazard,  
the power cord should also be unplugged from the  
AC outlet when left unused for a long period of time  
This product incorporates copyright protection  
technology that is protected by method claims of  
certain U.S. patents and other intellectual property  
rights owned by Macrovision Corporation and other  
rights owners. Use of this copyright protection  
technology must be authorized by Macrovision  
Corporation, and is intended for home and other  
limited viewing uses only unless otherwise authorized  
by Macrovision Corporation. Reverse engineering or  
disassembly is prohibited.  
(for example, when on vacation).  
D3-4-2-2-2a_A_En  
WARNING:ꢀꢁꢂꢃꢀꢄꢅꢆꢇꢈꢉꢊꢁꢉꢀꢅꢆꢃꢋꢌꢊꢉꢁꢍꢈꢅꢉꢊ  
ꢈꢉꢊꢁꢋꢎꢋꢋꢉꢈꢃꢎꢅꢇꢁꢏꢃꢅꢆꢎꢈꢈꢇꢋꢋꢉꢊꢃꢇꢋꢋꢉꢂꢁꢏꢃꢅꢆꢅꢆꢇ  
ꢌꢊꢉꢁꢍꢈꢅꢏꢃꢂꢂꢇꢐꢌꢉꢋꢇꢑꢉꢍꢅꢉꢈꢆꢇꢒꢃꢈꢎꢂꢋꢂꢃꢋꢅꢇꢁꢉꢀ  
ꢌꢊꢉꢌꢉꢋꢃꢅꢃꢉꢀꢓꢔꢕꢀꢉꢏꢀꢅꢉꢅꢆꢇꢖꢅꢎꢅꢇꢉꢗꢀꢑꢎꢂꢃꢗꢉꢊꢀꢃꢎꢎꢀꢁ  
ꢉꢅꢆꢇꢊꢄꢉꢘꢇꢊꢀꢒꢇꢀꢅꢎꢂꢇꢀꢅꢃꢅꢃꢇꢋꢅꢉꢈꢎꢍꢋꢇꢈꢎꢀꢈꢇꢊꢎꢀꢁ  
ꢃꢊꢅꢆꢁꢇꢗꢇꢈꢅꢉꢊꢉꢅꢆꢇꢊꢊꢇꢌꢊꢉꢁꢍꢈꢅꢃꢘꢇꢆꢎꢊꢒ  
Wash hands after handling  
D36-P4_A_En  
ꢀꢁꢂꢃꢄꢅꢆꢇꢈꢉꢊꢉꢆꢋꢊꢌꢂꢋꢃꢍꢎꢅꢉꢈꢅꢏꢐꢀꢒꢂꢃꢄꢆꢃꢌꢑꢆꢒꢊꢁꢂꢃ  
ꢍꢌꢊꢎꢅꢂꢌꢑꢍꢌꢏꢓꢎꢅꢎꢔꢈꢑꢌꢊꢎꢇꢇꢈꢎꢊꢆꢎꢋꢕꢂꢅꢆꢋꢍꢎꢋꢊꢌꢑ  
ꢉꢆꢋꢃꢂꢇꢎꢅꢌꢊꢂꢆꢋꢃꢐꢀꢍꢆꢅꢇꢂꢃꢄꢆꢃꢌꢑꢆꢅꢅꢎꢉꢏꢉꢑꢂꢋꢔꢂꢋꢒꢆꢅꢍꢌꢊꢂꢆꢋꢖ  
ꢄꢑꢎꢌꢃꢎꢉꢆꢋꢊꢌꢉꢊꢏꢆꢈꢅꢑꢆꢉꢌꢑꢌꢈꢊꢁꢆꢅꢂꢊꢂꢎꢃꢆꢅꢊꢁꢎꢀꢃꢑꢎꢉꢊꢅꢆꢋꢂꢉꢃ  
ꢋꢇꢈꢃꢊꢅꢂꢎꢃꢗꢑꢑꢂꢌꢋꢉꢎꢙꢙꢙꢐꢎꢂꢌꢎꢐꢆꢅꢔꢐ  
ꢘꢙꢚꢛ  
ꢁꢂꢃꢄꢃꢄꢅꢀꢁꢂ  
4
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
We Want You Listening For A Lifetime  
Since hearing damage from loud noise is often  
undetectable until it is too late, this manufacturer  
and the Electronic Industries Association’s  
Consumer Electronics Group recommend you avoid  
prolonged exposure to excessive noise. This list of  
sound levels is included for your protection.  
Selecting fine audio equipment such as the unit  
you’ve just purchased is only the start of your  
musical enjoyment. Now it’s time to consider how  
you can maximize the fun and excitement your  
equipment offers. This manufacturer and the  
Electronic Industries Association’s Consumer  
Electronics Group want you to get the most out of  
your equipment by playing it at a safe level. One that  
lets the sound come through loud and clear without  
annoying blaring or distortion-and, most importantly,  
without affecting your sensitive hearing.  
Decibel  
Level Example  
30 Quiet library, soft whispers  
40 Living room, refrigerator, bedroom away from traffic  
50 Light traffic, normal conversation, quiet office  
60 Air conditioner at 20 feet, sewing machine  
70 Vacuum cleaner, hair dryer, noisy restaurant  
80 Average city traffic, garbage disposals, alarm clock  
at two feet.  
Sound can be deceiving. Over time your hearing  
“comfort level” adapts to higher volumes of sound.  
So what sounds “normal” can actually be loud and  
harmful to your hearing. Guard against this by  
setting your equipment at a safe level BEFORE your  
hearing adapts.  
THE FOLLOWING NOISES CAN BE DANGEROUS  
UNDER CONSTANT EXPOSURE  
90 Subway, motorcycle, truck traffic, lawn mower  
100 Garbage truck, chain saw, pneumatic drill  
120 Rock band concert in front of speakers,  
thunderclap  
140 Gunshot blast, jet plane  
180 Rocket launching pad  
To establish a safe level:  
• Start your volume control at a low setting.  
• Slowly increase the sound until you can hear it  
comfortably and clearly, and without distortion.  
Information courtesy of the Deafness Research Foundation.  
Once you have established a comfortable sound  
level:  
• Set the dial and leave it there.  
Taking a minute to do this now will help to prevent  
hearing damage or loss in the future. After all, we  
want you listening for a lifetime.  
S001_En  
5
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Contents  
01 Before you start  
06 Using the Home Media Gallery  
Features. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7  
What’s in the box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8  
Putting the batteries in the remote control. . . . . . . . . . . . . . . . . . 8  
Using the remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8  
Disc/content format playback compatibility . . . . . . . . . . . . . . . . . 9  
File compatibility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9  
Titles and chapters. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10  
DVD-Video regions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10  
BD-ROM regions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10  
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32  
About network playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32  
Using the Home Media Gallery . . . . . . . . . . . . . . . . . . . . . . . . . . 33  
Movie Navigator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33  
Photo Navigator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35  
Music Navigator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36  
About Windows Media Player 11/Windows Media Connect . . . . 38  
07 Video/Audio Adjust menu  
Video Adjust . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39  
Audio Adjust . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40  
02 Connecting up  
Rear panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11  
Easy connections. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12  
Using other types of video output. . . . . . . . . . . . . . . . . . . . . . . . 12  
Connecting for HDMI output . . . . . . . . . . . . . . . . . . . . . . . . . . . 13  
Connecting using the component video output . . . . . . . . . . . . . 13  
Changing the output video resolution . . . . . . . . . . . . . . . . . . . . 14  
Connecting using an S-Video output . . . . . . . . . . . . . . . . . . . . . 14  
Connecting for surround sound . . . . . . . . . . . . . . . . . . . . . . . . . 15  
Network connection. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16  
Controlling this player via another Pioneer component . . . . . . . 16  
Using an external IR receiver with this player. . . . . . . . . . . . . . . 17  
08 Initial Setup menu  
Using the Initial Setup menu. . . . . . . . . . . . . . . . . . . . . . . . . . . . 41  
About the audio output settings . . . . . . . . . . . . . . . . . . . . . . . . . 44  
Speaker Setup. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45  
Software updating. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45  
09 Additional information  
Taking care of your player and discs . . . . . . . . . . . . . . . . . . . . . . 46  
Screen sizes and disc formats. . . . . . . . . . . . . . . . . . . . . . . . . . . 47  
Resetting the player . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47  
Setting up the remote to control your TV . . . . . . . . . . . . . . . . . . . 48  
TV Preset code list. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48  
BD/DVD language code list. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49  
BD/DVD country/area code list . . . . . . . . . . . . . . . . . . . . . . . . . . 49  
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49  
Glossary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54  
License . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56  
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65  
03 Controls and displays  
Front panel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18  
Front panel display. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18  
Remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19  
04 Getting Started  
Switching on and setting up . . . . . . . . . . . . . . . . . . . . . . . . . . . 20  
Using the on-screen displays . . . . . . . . . . . . . . . . . . . . . . . . . . . 21  
Setting up for network use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21  
Playing movies, music and photos. . . . . . . . . . . . . . . . . . . . . . . 22  
Playing BD/DVD movies and Audio CD . . . . . . . . . . . . . . . . . . . 22  
Playback controls. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23  
Frequently Asked Questions. . . . . . . . . . . . . . . . . . . . . . . . . . . . 26  
05 Using the Disc Navigator  
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27  
Movie Navigator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27  
Photo Navigator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28  
Music Navigator. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30  
6
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 1  
01  
Before you start  
Features  
HDMI digital interface  
The HDMI (High-Definition Multimedia Interface) interconnect  
provides high quality digital audio and video, all from a single  
user-friendly connector. HDMI is the first consumer electronics  
interface to support uncompressed standard, enhanced, or  
high-definition video plus standard to multi-channel surround  
sound audio, all using one interface. You can easily connect to an  
HDMI-equipped AV receiver or audio-visual device for high quality  
audio and video.  
BD-ROM playback  
Blu-ray Disc is a next-generation video disc format featuring far  
higher disc capacity than conventional DVD. The higher capacity  
makes a whole range of new and enhanced features possible, such  
as support for high-definition video up to 1920 x 1080 pixels, high  
quality, surround sound audio, greater interactivity and richer  
content.  
• HDMI, the HDMI logo and High-Definition Multimedia Interface  
are trademarks or registered trademarks of HDMI Licensing LLC.  
BD-ROM discs are commercially produced discs (Video Distribution  
format) that can contain movie and other video content, interactive  
content, enhanced menu features such as pop-up menus (press  
POPUP MENU/MENU during playback for these), full-color,  
high-definition animated buttons and animated menu transition  
effects, button sounds (sounds are played when menu buttons are  
selected or activated), high-definition bitmap subtitles supporting  
full-color images with frame-accurate animation effects up to full  
video frame rate, and so on.  
HDMI Control  
By connecting this unit to a Pioneer plasma display or AV system  
(amplifier or AV receiver etc.) with an HDMI cable, you can control  
this unit from the connected plasma display, as well as have the  
connected plasma display or AV system automatically change  
inputs in response to this unit starting playback or having the GUI  
screen (ex. Disc Navigator) displayed (known as the Auto-select  
function). The connected plasma display can thereby have its power  
turned from off to on by this function.  
While BD capacity is enough for most applications, the BD-ROM  
standard allows for content to be spread across several discs,  
removing the limit of one physical disc. Follow the on-screen  
instructions during playback when using these special kinds of  
discs.  
You can also have this unit turn on automatically when you control  
this unit from a connected plasma display that is turned on  
(Simultaneous power function).  
Additionally, when the language information from a connected  
plasma display is received, you can have this unit’s on-screen  
display language change automatically to that of the plasma display  
(only when playback is stopped and GUI screen is not displayed).  
BD-J application  
Refer to your plasma display’s operating manual for more  
information regarding how your plasma display transmits language  
information.  
For more information about which operations can be carried out by  
connecting via HDMI cable, refer to the operating manual for your  
plasma display or AV system.  
PureCinema  
The BD-ROM specification supports Java for interactive content.  
The Java specification for BD-ROM is known as BD-J. This allows  
content providers to put games and other interactive material linked  
to specific titles on to BD-ROM discs. (This player does not support  
downloadable BD-J content, direct connection to the Internet or the  
retrieval of content through the Internet.)  
When you playback film material (24 frames/second) on a BD-ROM  
or DVD-Video disc, the progressive scan line automatically converts  
the film material to optimum quality (see PureCinema on page 39).  
1080/60p and 1080/24p output video  
This player supports a variety of output video resolutions, up to  
1080 lines/60 frames per second, progressive (HDMI only), making  
it ideal for playing high-definition Blu-ray Discs.  
• Java and all Java-based trademarks and logos are trademarks or  
registered trademarks of Sun Microsystems, Inc. in the U.S. and  
other countries.  
• © 2000-2007 Esmertec AG  
Esmertec and Jbed are trademarks and/or registered trademarks of  
Esmertec AG.  
Connect to a local area network  
Connect this player to one or more computers in your house via  
Ethernet and use them as media servers, streaming audio, video  
and still image files for playback on your TV and/or audio system.  
7
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
High quality audio  
Putting the batteries in the remote control  
01  
Insert two AA/R6P batteries into the battery compartment  
following the indications (,) inside the compartment.  
Important  
This player is compatible with Dolby TrueHD, Dolby Digital Plus,  
DTS-HD High Resolution Audio, Dolby Digital and DTS.  
Incorrect use of batteries can result in hazards such as leakage and  
bursting. Please observe the following:  
To enjoy Dolby TrueHD, Dolby Digital Plus or DTS-HD High  
Resolution Audio at the maximum performance, connect this player  
to a Dolby TrueHD, Dolby Digital Plus or DTS-HD High Resolution  
Audio-compatible AV amplifier using an HDMI cable. Then, after  
placing a Blu-ray Disc recording a material with Dolby TrueHD,  
Dolby Digital Plus or DTS-HD High Resolution Audio, open the disc  
menu and select “Dolby TrueHD”, “Dolby Digital Plus” or “DTS-HD  
High Resolution Audio” from the menu.  
• Don’t mix new and old batteries together.  
• Don’t use different kinds of batteries together — although they  
may look similar, different batteries may have different voltages.  
• Make sure that the plus and minus ends of each battery match  
the indications in the battery compartment.  
• Remove batteries from equipment that isn’t going to be used for  
a month or more.  
For the output conditions of various audio types, see About the audio  
output settings on page 44.  
• When disposing of used batteries, please comply with  
governmental regulations or environmental public instruction’s  
rules that apply in your country/area.  
• Manufactured under license from Dolby Laboratories. “Dolby” and  
the double-D symbol are trademarks of Dolby Laboratories.  
WARNING  
• “DTS” and “DTS Digital Surround” are registered trademarks of  
DTS, Inc.  
Do not use or store batteries in direct sunlight or other  
excessively hot place, such as inside a car or near a heater. This  
can cause batteries to leak, overheat, explode or catch fire. It  
can also reduce the life or performance of batteries.  
D3-4-2-3-3_En  
Movie file playback  
Video files encoded in the Windows Media™ Video (WMV), MPEG-1/  
2 formats are playable from DVD-R/-RW, or from a connected media  
server.  
Using the remote control  
Music file playback  
This player supports various audio formats, including Windows  
Media Audio (WMA), MP3 and WAV. You can play files stored on  
DVD-R/-RW, or from a connected media server.  
Please keep in mind the following when using the remote control:  
• Make sure that there are no obstacles between the remote and  
the remote sensor on the unit.  
• The remote has a range of about 23 feet (at an angle of 30º from  
either side of the sensor). Use within this range in front of the  
remote control sensor on the front panel.  
Photo file playback  
PNG, GIF and JPEG image files — including the popular EXIF format  
used by most digital cameras to store picture shooting information  
together with the JPEG image — are playable from DVD-R/-RW, or  
from a connected media server.  
• Remote operation may become unreliable if strong sunlight or  
fluorescent light is shining on the unit’s remote sensor.  
• Remote controllers for different devices can interfere with each  
other. Avoid using remotes for other equipment located close to  
this unit.  
• Windows Media™ is a trademark of Microsoft Corporation.  
• This product includes technology owned by Microsoft Corporation  
and cannot be used or distributed without a license from  
Microsoft Licensing, Inc.  
• Replace the batteries when you notice a fall off in the operating  
range of the remote.  
What’s in the box  
• When the batteries run down or you change the batteries, the TV  
preset codes are automatically reset. See Resetting the player on  
page 47 to reset them.  
Please confirm that the following accessories are in the box along  
with these operating instructions when you open it:  
• Remote control  
• AA/R6P dry cell batteries x2  
• Stereo audio cable (red/white plugs)  
• Video cable (yellow plugs)  
• LAN cable  
• Power cable  
• Warranty card  
8
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
– This player can also play DVD discs containing PC data.  
See below for the file compatibility.  
Disc/content format playback compatibility  
01  
• This player cannot play DVD-Audio and DVD-RAM discs.  
General disc compatibility  
CD compatibility  
This player is compatible with a range of disc types (media) and  
formats. Compatible discs will usually feature one of the following  
logos on the disc and/or disc packaging. Note however that some  
disc types, such as recordable BD, DVD or CD, may be in an  
unplayable format — see below for further compatibility  
information.  
• This player can play CD-DA discs.  
• PC files stored on CDs cannot be played back.  
• Regarding copy protected CDs: This product is designed to  
conform to the specifications of the Audio CD format. This  
player does not support the playback or function of discs that do  
not conform to these specifications.  
Blu-ray Disc (BD)  
• The audio signals of a CD output at the DIGITAL AUDIO OUT  
(COAXIAL/OPTICAL) jacks of this player are protected from  
copying and cannot be copied on other external components.  
DualDisc playback  
DVD-Video  
DVD-R  
DVD-R DL  
DVD-RW  
A DualDisc is a new two -sided disc, one side of which contains DVD  
content – video, audio, etc. – while the other side contains non-DVD  
content such as digital audio material.  
The DVD side of a DualDisc will play in this product (excluding any  
DVD-Audio content).  
The non-DVD, audio side of the disc is not compatible with this  
player.  
It is possible that when loading or ejecting a DualDisc, the opposite  
side to that being played will be scratched. Scratched discs may not  
be playable.  
For more detailed information on the DualDisc specification, please  
refer to the disc manufacturer or disc retailer.  
“Blu-ray Disc” and  
are trademarks.  
is a trademark of DVD Format/Logo Licensing  
Corporation.  
PC-created disc compatibility  
Discs recorded using a personal computer may not be playable in  
this unit due to the settings of the application software used to  
create the disc. Check with the software publisher for more detailed  
information.  
• This player may not be able to play perfectly every disc that  
features one of the logos listed above. Please contact Pioneer if  
you find a disc that won’t play properly.  
BD compatibility  
Important  
• This player can play BD-ROM discs.  
• This player cannot play discs other than the ones listed in this  
chapter.  
– BD-ROM discs should conform to BD-ROM Profile 1.  
• This player can play BD-R discs.  
• Do not use 8 cm disc adapters with this player. 8 cm discs can  
be played directly by placing then in the 8 cm disc depression in  
the center of the disc tray.  
– This player is compatible with Blu-ray Disc Recordable format  
1
Ver. 2 .  
– This player is not compatible with Blu-ray Disc Recordable  
format Ver. 1 .  
2
File compatibility  
• This player can play BD-RE discs.  
• Compatible media: DVD-R, DVD-RW, media server on network  
(some formats may not be supported depending on the media  
server type).  
– This player is compatible with Blu-ray Disc Rewritable format  
Ver. 31.  
– This player is not compatible with Blu-ray Disc Rewritable  
• Even when they are in a supported format, some files may not  
play or display depending on the content.  
3
format Ver. 1 and Ver. 22.  
• This player can play 12 cm discs, but cannot play 8 cm discs.  
• Even when playing a supported format, some functions may not  
operate properly depending on the content.  
DVD compatibility  
• This player can play DVD-ROM (DVD-Video)/-R/-RW discs.  
• DRM-protected contents on DVD-R/-RW discs or on media  
servers that do not support WMDRM, and otherwise  
incompatible files are skipped.  
– This player can play DVD-R/-RW discs recorded as DVD-Video  
format.  
– This player cannot play unfinalized DVD discs and VR mode  
DVD discs.  
Note  
1 The standard for recording of BDMV format data.  
2 The standard for recording of BDAV format data.  
3 The standard that uses the provided cartridge.  
9
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
• Please note, the following file naming structure needs to be  
adhered to when creating/renaming any digital media to be  
played on the unit (either through computer-created disc media,  
or the Home Media Gallery connection). This disclaimer does  
not apply to any media purchased at retail locations: Due to the  
coding system used, this player will only read/play files named  
using standard alphanumeric characters. Any other characters  
or symbols (e.g. characters with accents) used in naming the  
file will render it unreadable/unplayable by the unit. If you  
encounter any difficulties with playback of media, please  
rename the file in accordance to this standard.  
Even when files have a supported file extension, some files may not  
play or display depending on the content or media server type.  
01  
Titles and chapters  
BD and DVD movie discs are divided into one or more titles. Titles  
may be further subdivided into chapters.  
Title 1  
Title 2  
Title 3  
Supported video formats  
Chapter 1 Chapter 2 Chapter 3Chapter 1 Chapter 1 Chapter 2  
1
Windows Media Video 9 (WMV9)  
– MP@HL  
DVD-Video regions  
Windows Media Video 9 (WMV9) Advanced Profile (VC-1)  
All commercially produced DVD movies (DVD-Video discs) carry a  
region mark on the case somewhere that indicates which region(s)  
of the world the disc is compatible with. This player also has a region  
mark, which you can find on the rear panel. Discs from incompatible  
regions will not play in this player. Discs marked ALL will play in any  
player.  
– AP@L3  
MPEG-2 (PS/TS)  
– MP@HL  
MPEG-1  
The diagram below shows the various DVD regions of the world.  
Supported audio formats  
Windows Media Audio 9 (WMA9)  
– Bit rate: up to 192 kbps (constant bit-rate (CBR));  
1
up to 384 kbps (variable bit-rate (VBR))  
– Sampling rates: 44.1 kHz or 48 kHz  
5
2
1
6
2
Windows Media Audio 9 Professional (WMA9 Pro)  
– Bit rate: up to 768 kbps  
3
4
5
– Sampling rates: 44.1 kHz or 48 kHz  
– Channels: up to 5.1ch  
2
4
This player is region 1.  
MPEG-1 Audio Layer 3 (MP3)  
– Sampling rates: 32 kHz, 44.1 kHz or 48 kHz  
– Bit rate: up to 320 kbps  
BD-ROM regions  
Linear PCM (WAV)  
Like DVD movies, BD movie discs (BD-ROM) also carry a region  
mark that indicates which region(s) of the world the disc is compat-  
ible with. This player also has a region mark, which you can find on  
the rear panel. Discs from incompatible regions will not play in this  
player. Discs marked ALL will play in any player.  
– Sampling rates: 44.1 kHz or 48 kHz  
Supported image formats  
JPEG  
– File format: JFIF or Exif  
The diagram below shows the various BD-ROM regions of the world.  
– Resolution: up to 4096 x 4096 pixels  
Baseline JPEG and progressive JPEG are supported  
PNG  
– Resolution: up to 4096 x 4096 pixels  
GIF  
– Resolution: up to 4096 x 4096 pixels  
Region A  
Region B  
Region C  
File extensions  
The following file extensions should be used with this player:  
This player is region A.  
Video  
‘.wmv’ ‘.mpg’ ‘.mpeg’  
Audio  
‘.wma’ ‘.mp3’ ‘.wav’  
Image  
‘.jpg’ ‘.jpeg’ ‘.png’ ‘.gif’  
10  
En  
Note  
1 This player is not compatible with WMV9 Complex Profile.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CChoaptnern2 ecting up  
02  
Rear panel  
1
2
3
4
5
6
7
8
9
CONTROL  
IN  
IN  
IR  
AUDIO OUT  
(5.1ch)  
AUDIO OUT  
(2ch)  
AC IN  
Y
CENTER SURROUND FRONT  
L
VIDEO OUT  
L
DIGITAL AUDIO OUT  
PB  
SETTING  
SETTING  
2
1
HDMI OUT  
LAN(100)  
R
PR  
S
IR RECEIVER  
R
SUB WOOFER  
COMPONENT  
VIDEO OUT  
COAXIAL  
OPTICAL  
10 11  
1
AC IN  
8
AUDIO OUT (5.1ch)  
Connect the supplied power cord here, then plug into a power  
outlet.  
Multi-channel (5.1ch) analog audio outputs for connection to an AV  
receiver with multi-channel analog audio inputs (page 15).  
2
CONTROL IN  
9
AUDIO OUT (2ch)  
Use to control this player from the remote sensor of another Pioneer  
component with a CONTROL OUT terminal and bearing the   
mark. Connect the CONTROL OUT of the other component to the  
CONTROL IN of this player using a mini-plug cord (page 16).  
Stereo analog audio outputs for connection to your TV, AV receiver  
or stereo system (page 12).  
10 IR IN  
Jack for an external IR (infrared) remote control receiver (page 17).  
3
HDMI OUT  
11 IR RECEIVER switch  
Switch to the setting compatible with your external IR remote  
control receiver (page 17).  
HDMI output providing a high quality interface for digital audio and  
video (page 13).  
4
LAN (100)  
Ethernet port for 100BASE-TX (100 Mbps) network connection  
(page 16).  
Tip  
• When connecting this player to your TV, AV receiver or other  
equipment, make sure that all components are ‘switched off’  
and ‘unplugged’.  
5
VIDEO OUT and S-VIDEO OUT  
Video output (composite) that you can connect to your TV or AV  
receiver using the supplied video cable (page 12).  
• You may find it useful to have the manuals supplied with your  
other components handy when connecting this player.  
S-Video output that you can use instead of the VIDEO OUT jacks  
(page 14).  
6
COMPONENT VIDEO OUT  
High quality video output for connection to a TV, monitor or AV  
receiver that has component video inputs.  
Connect using a commercially available three-way component video  
cable (page 13).  
7
DIGITAL AUDIO OUT (COAXIAL/OPTICAL)  
Digital audio outputs for connection to a PCM, Dolby Digital, and/or  
DTS-compatible AV receiver (page 15).  
11  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Easy connections  
02  
To audio input  
To video input  
TV  
CONTROL  
IN  
IR  
AUDIO OUT  
(5.1ch)  
AUDIO OUT  
(2ch)  
AC IN  
Y
IN  
CENTER SURROUND FRONT  
L
VIDEO OUT  
L
DIGITAL AUDIO OUT  
PB  
SETTING  
SETTING  
2
1
HDMI OUT  
LAN(100)  
R
PR  
S
IR RECEIVER  
R
SUB WOOFER  
COMPONENT  
VIDEO OUT  
COAXIAL  
OPTICAL  
To power outlet  
This is a basic setup that allows you to watch discs on your TV using  
just the cables supplied.  
Using other types of video output  
This player has standard (composite), S-Video and component video  
outputs, as well as an HDMI connector (for digital video/audio).  
Important  
In order to be able to watch HD (high definition) BDs at their full  
resolution, you should connect the player to your TV using either the  
component video output, or (even better) the HDMI output.  
• This player is equipped with copy protection technology. Do not  
connect this player to your TV via a VCR using AV cables, as the  
picture from this player will not appear properly on your TV. (This  
player may also not be compatible with some combination TV/  
VCRs for the same reason; refer to the manufacturer for more  
information.)  
An HDMI connection will additionally give you HD output when  
watching DVDs.  
If your display has neither of these connection types, an S-Video jack  
is also provided, which should give slightly better video quality than  
using the standard video output.  
• Do not unplug the player from the power outlet while it is  
switched on.  
• Do not plug this player into a switched power supply found on  
some amplifiers and AV receivers.  
1
Connect the VIDEO OUT and one pair of AUDIO OUT (2ch)  
jacks to a set of audio/video inputs on your TV.  
Use the supplied red/white stereo audio and yellow video cables.  
Make sure you match up the left and right audio outputs with their  
corresponding inputs for correct stereo sound.  
See Using other types of video output below if you want to use a  
different type of connection.  
2
Connect the supplied AC power cord to the AC IN inlet,  
then plug into a power outlet.  
12  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
After switching on the player you may need to set the output video  
resolution and HDMI color space for compatibility with your display.  
See Changing the output video resolution on page 14 and  
Connecting for HDMI output  
02  
If you have an HDMI or DVI (with HDCP) equipped monitor or  
display, you can connect it to this player using a commercially  
available HDMI cable that supports the HDMI 1.3 specification  
(Category 2) or later.  
HDMI Color Space in Using the Initial Setup menu on page 41.  
About HDMI  
HDMI supports both standard and high-definition video, plus  
standard and multi-channel surround-sound audio. HDMI features  
include uncompressed digital video, one connector (instead of  
several cables and connectors), and communication between the  
AV source and AV devices such as DTVs.  
The HDMI connector outputs uncompressed digital video, as well as  
most digital audio formats.  
Important  
HDMI was developed to provide the technologies of High-bandwidth  
Digital Content Protection (HDCP) as well as Digital Visual Interface  
(DVI) in one specification. HDCP is used to protect digital content  
transmitted and received by DVI-compliant displays.  
• This unit has been designed to be compliant with HDMI  
(High-Definition Multimedia Interface). Depending on the  
component you have connected, using a DVI connection may  
result in unreliable signal transfers.  
• If you change the display connected to the HDMI output, you will  
also need to change the output video resolution settings to  
match the new display (see Changing the output video resolution  
on page 14 to do this).  
About HDMI Control  
You can enable HDMI Control by turning the HDMI Control setting  
to On for all components connected via HDMI cable. Check the  
video output from this unit once you have completed making  
connections and settings for all components. You will need to check  
the video output each time you change connected components or  
remove the HDMI cable.  
• The HDMI connection is compatible with 8-channel linear PCM  
1
signals (44.1 kHz to 192 kHz , 16 bit/20 bit/24 bit), Dolby Digital,  
Dolby TrueHD, Dolby Digital Plus, DTS-HD High Resolution  
Audio and DTS (5.1 channel signals) bitstreams.  
The HDMI Control functions may not operate properly if you do not  
use an HDMI cable that supports the HDMI 1.3 specification  
(Category 2) or later.  
• Depending on the HDMI cable being used, 1080p output may  
not appear correctly.  
• If you connect a DVI device to the HDMI output of this player,  
ensure that it is compliant with High-bandwidth Digital Content  
Protection (HDCP). If you choose to connect to a DVI connector,  
you will need a separate adaptor (DVIHDMI) to do so. A DVI  
connection, however, does not support audio signals. Consult  
your local audio dealer for more information.  
Connecting using the component video  
output  
You can use the component video output instead of the standard  
video out jack to connect this player to your TV (or other equipment).  
Use an HDMI cable (not supplied) to connect the HDMI OUT  
Use a component video cable (not supplied) to connect the  
interconnect on this player to an HDMI interconnect on an  
HDMI-compatible display.  
COMPONENT VIDEO OUT jacks to a component video input on  
your TV, monitor or AV receiver.  
Be careful to match up the colors of the three jacks for correct  
connection.  
To HDMI  
interconnect  
To component  
video input  
HDMI-compatible display  
CONTROL  
IN  
TV  
IR  
AUDIO OUT  
(5.1ch)  
AUDIO OUT  
(2ch)  
Y
IN  
CENTER SURROUND FRONT  
L
VIDEO OUT  
L
DIGITAL AUDIO OUT  
P
B
SETTING  
SETTING  
2
1
HDMI OUT  
LAN(100)  
R
P
R
S
IR RECEIVER  
R
SUB WOOFER  
CONTROL  
IN  
COMPONENT  
VIDEO OUT  
COAXIAL  
OPTICAL  
IR  
AUDIO OUT  
(5.1ch)  
AUDIO OUT  
(2ch)  
Y
IN  
CENTER SURROUND FRONT  
L
VIDEO OUT  
L
DIGITAL AUDIO OUT  
PB  
SETTING  
SETTING  
2
1
HDMI OUT  
LAN(100)  
• The arrow on the cable connector body should be face up for  
correct alignment with the connector on the player.  
R
PR  
S
IR RECEIVER  
R
SUB WOOFER  
COMPONENT  
VIDEO OUT  
COAXIAL  
OPTICAL  
13  
En  
Note  
1 There are some restrictions depending on the sampling rate. For more information see About the audio output settings on page 44.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
24p output  
Changing the output video resolution  
02  
For smooth presentation of 1080/24p or 720/24p video with an  
HDMI-equipped display compatible with 1080/24p input, set  
24p Direct Out (page 41) on this player to On.  
Use the OUTPUT RESOLUTION button located on both the front  
panel and the remote control to switch the output video resolution  
for the HDMI and component video outputs.  
This player will output 1080/24p video over HDMI in the following  
cases:  
The table below shows the output settings.  
• 1080/24p video: When the output video resolution is set to Auto  
or Source Direct.  
Component  
output  
Video/S-Video  
output  
Setting  
AUTO  
HDMI output  
• 720/24p video: When the output video resolution is set to Auto.  
TV’s preferred  
resolution1,2  
TV’s preferred  
resolution3  
480/60i  
Note  
480i  
480/60i  
480/60p  
720/60p  
1080/60i  
480/60i  
480/60i  
480/60i  
480/60i  
480/60i  
• Even when 24p Direct Out is set to On, if a TV not compatible  
with 1080/24p video is connected, the actual frame frequency of  
the video output will be 60 Hz.  
480p  
720p  
1080i  
480/60p  
720/60p 4,5  
• The video output will be interrupted when switching the video  
output from 1080/24p or 720/24p to other output video  
resolutions, or when switching to 1080/24p or 720/24p from  
other output video resolutions.  
1080/60i4,5  
480/60i  
1080p  
1080/60p  
480/60i  
480/60i  
Source  
Direct  
Dependent on  
source1,2  
Dependent on  
source 2,5,6,  
Connecting using an S-Video output  
You can use the S-Video output instead of the VIDEO OUT jack to  
connect this player to your TV (or other equipment).  
1. Refer to 24p output below for conditions.  
2. The video output will be interrupted when switching the video output.  
3. For resolutions that cannot be output by component output, video is output in the  
following resolutions: 480/60i  
Use an S-Video cable (not supplied) to connect the S-VIDEO  
OUT to an S-Video input on your TV, monitor or AV receiver.  
Line up the small triangle above the jack with the same mark on the  
plug before plugging in.  
4. Video output is 480i during copy protected DVD-Video playback.  
5. Video output during BD-ROM playback is 480i depending on the disc.  
6. The frame frequency for 1080/24p is still 60 Hz.  
Note  
• Depending on your display, some of the settings may result in  
the picture disappearing. In this case, press  
To S-video input  
OUTPUT RESOLUTION repeatedly until the picture re-appears.  
• 1080/60p and 1080/24p output is only compatible with HDMI  
displays. They are not compatible with the component video  
output.  
TV  
• When output video resolution is set to 720p, 1080i or 1080p,  
video is output in 16:9 format even if TV Aspect Ratio (page 41)  
is set to 4:3 (Standard).  
CONTROL  
IN  
• If the contours of the displayed subjects look jagged or blurred,  
try setting the output video resolution to 480i. (If you connected  
this player to your TV with the HDMI connection and the picture  
disappears when you switch the output video resolution to 480i,  
use the component connection with the 480i output video  
resolution or S-Video, the standard composite connection  
instead.)  
IR  
AUDIO OUT  
(5.1ch)  
AUDIO OUT  
(2ch)  
Y
IN  
CENTER SURROUND FRONT  
L
VIDEO OUT  
L
DIGITAL AUDIO OUT  
P
B
SETTING  
SETTING  
2
1
HDMI OUT  
LAN(100)  
R
P
R
S
IR RECEIVER  
R
SUB WOOFER  
COMPONENT  
VIDEO OUT  
COAXIAL  
OPTICAL  
• Note that when using a Component Video connection with a TV  
or other AV component (not using HDMI), 480/60i video may be  
output in 480/60p.  
14  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Analog connections  
Connect the AUDIO OUT (5.1ch) jacks on this player to the  
multi-channel analog inputs on your AV receiver.  
Use a dedicated six-way cable (not supplied), or three sets of stereo  
cables (not supplied) to connect the six channels.  
Connecting for surround sound  
02  
This player offers both analog and digital connections for surround  
sound. The digital outputs (coaxial and optical) provide a convenient  
way to connect this player to an AV receiver with built-in Dolby  
Digital and/or DTS decoders. The 5.1ch analog outputs can be used  
to connect to an AV receiver with multi-channel analog audio inputs.  
Check carefully that each channel is connected to its corresponding  
channel on the AV receiver.  
Check the operating instructions that came with your AV receiver for  
more on these connections.  
After connecting, you can make settings for the number of speakers  
connected to your system — see the Speakers section of the Initial  
Setup menu on page 43 and Speaker Setup on page 45.  
Digital connections  
To multi-channel  
input  
Connect one of the DIGITAL AUDIO OUT (COAXIAL/  
OPTICAL) jacks on this player to a digital input on your AV  
receiver.  
AV receiver  
To coaxial/optical  
digital input  
AV receiver  
CONTROL  
IN  
CONTROL  
IN  
IR  
AUDIO OUT  
(5.1ch)  
AUDIO OUT  
(2ch)  
Y
IN  
CENTER SURROUND FRONT  
L
VIDEO OUT  
L
IR  
AUDIO OUT  
(5.1ch)  
AUDIO OUT  
(2ch)  
DIGITAL AUDIO OUT  
PB  
SETTING  
SETTING  
2
1
Y
HDMI OUT  
LAN(100)  
IN  
CENTER SURROUND FRONT  
L
VIDEO OUT  
L
R
DIGITAL AUDIO OUT  
PR  
S
IR RECEIVER  
PB  
SETTING  
SETTING  
2
1
HDMI OUT  
LAN(100)  
R
SUB WOOFER  
COMPONENT  
VIDEO OUT  
COAXIAL  
OPTICAL  
R
PR  
S
IR RECEIVER  
R
SUB WOOFER  
COMPONENT  
VIDEO OUT  
COAXIAL  
OPTICAL  
Optical connection: Use an optical cable (not supplied) to connect  
the DIGITAL AUDIO OUT OPTICAL jack to an optical input on your  
AV receiver.  
• When inserting the plug, the protective shutter will open and  
you should hear the plug click into position when fully inserted.  
Take care not to force the plug as this may damage the shutter,  
the cable and/or the player.  
Coaxial connection: Use a coaxial cable (not supplied) to connect  
the DIGITAL AUDIO OUT COAXIAL jack to a coaxial input on your  
AV receiver.  
Note  
• Linear PCM audio output over the DIGITAL AUDIO OUT  
(COAXIAL/OPTICAL) jacks is limited to 2ch, 48 kHz.  
15  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connecting directly to a PC  
If you only need to use one PC to act as a media server, you can  
connect this player directly to the PC using the included LAN cable.  
Network connection  
02  
This player can be connected to a local area network (LAN) via the  
Ethernet port on the rear panel.  
CONTROL  
IN  
After making the physical connection the player needs to be set up  
for network communication. This is done from the Initial Setup  
menu — see Setting up for network use on page 21 for detailed  
instructions.  
IR  
AUDIO OUT  
(5.1ch)  
AUDIO OUT  
(2ch)  
Y
IN  
CENTER SURROUND FRONT  
L
VIDEO OUT  
L
DIGITAL AUDIO OUT  
PB  
SETTING  
SETTING  
2
1
HDMI OUT  
LAN(100)  
R
PR  
S
IR RECEIVER  
R
SUB WOOFER  
COMPONENT  
VIDEO OUT  
COAXIAL  
OPTICAL  
For best performance, we recommend using a 100BASE-TX  
compatible PC and Ethernet hub.  
Connecting via an Ethernet hub  
If you already operate one or more PCs on a local area network, you  
can integrate this player by connecting it to the Ethernet hub using  
the included LAN cable.  
LAN(10/100)  
In the example configuration below, this player would be able to  
access content from either of the PCs.  
CONTROL  
IN  
IR  
AUDIO OUT  
(5.1ch)  
AUDIO OUT  
(2ch)  
Y
IN  
CENTER SURROUND FRONT  
L
VIDEO OUT  
L
DIGITAL AUDIO OUT  
P
B
SETTING  
SETTING  
2
1
HDMI OUT  
LAN(100)  
PC  
R
P
R
S
IR RECEIVER  
R
SUB WOOFER  
COMPONENT  
VIDEO OUT  
COAXIAL  
OPTICAL  
Controlling this player via another Pioneer  
component  
The CONTROL IN jack allows you to control this player via the  
remote control sensor of another Pioneer component — typically an  
AV receiver — that has a CONTROL OUT jack. Remote control  
signals are passed through to the player from the remote sensor of  
the other component, allowing you greater freedom in the  
placement of your player.  
Ethernet hub  
(router with hub functionality)  
1
2
3
4
Use a miniplug cord (not supplied) to connect the CONTROL  
IN jack of this player with the CONTROL OUT jack of your other  
Pioneer component.  
LAN(10/100)  
LAN(10/100)  
To CONTROL OUT  
AV Receiver  
PC 1  
PC 2  
CONTROL  
IN  
IR  
AUDIO OUT  
(5.1ch)  
AUDIO OUT  
(2ch)  
Y
IN  
CENTER SURROUND FRONT  
L
VIDEO OUT  
L
DIGITAL AUDIO OUT  
PB  
SETTING  
SETTING  
2
1
HDMI OUT  
LAN(100)  
R
PR  
S
IR RECEIVER  
R
SUB WOOFER  
COMPONENT  
VIDEO OUT  
COAXIAL  
OPTICAL  
• You will also need to connect a coaxial digital cable, analog  
audio cable, or video cable.  
• When connected via System Control, point the remote control  
toward the connected component (such as an AV receiver). The  
remote will not work correctly when pointed at this unit.  
• You cannot connect use System Control with components that  
do not have a System Control jack or with components  
manufactured by companies other than Pioneer.  
16  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Using an external IR receiver with this player  
02  
If you prefer to keep your AV equipment in a closed cabinet, you can  
use an external IR receiver connected to the IR IN jack. You can thus  
have just the receiver outside of the cabinet and still be able to  
control the player.  
IR receiver  
CONTROL  
IN  
IR  
AUDIO OUT  
(5.1ch)  
AUDIO OUT  
(2ch)  
Y
IN  
CENTER SURROUND FRONT  
L
VIDEO OUT  
L
DIGITAL AUDIO OUT  
PB  
SETTING  
SETTING  
2
1
HDMI OUT  
LAN(100)  
R
PR  
S
IR RECEIVER  
R
SUB WOOFER  
COMPONENT  
VIDEO OUT  
COAXIAL  
OPTICAL  
Tip  
• You may need to set the IR RECEIVER switch (located under the  
IR IN jack) for this player to recognize the IR receiver correctly.  
• This player does not supply power to the external IR receiver.  
Please see the operating instructions of the IR receiver for the  
power requirements.  
17  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 3  
03  
Controls and displays  
Front panel  
1
2
3
4
5
10  
9
8
7
6
1
STANDBY/ON  
6
(play)  
Press to switch the player on (the power indicator and indicator in  
the middle of the unit light up when the power is on) or into standby.  
Press to start or resume playback.  
7
(stop)  
2
Disc tray  
Press to stop playback (you can resume playback by pressing ).  
3
OPEN/CLOSE  
8 (pause)  
Press to open or close the disc tray.  
Press to pause playback. Press again to restart.  
4
Indicators  
9
Skip/scan buttons  
FL OFF – Lights when the display and other indicators are  
switched off.  
  – Press to jump to the next chapter, track, etc. Press  
and hold for fast forward scanning.  
HD – Lights when the video output is 720p, 1080i or 1080p  
(HDMI), or 720p or 1080i (component).  
  – Press to jump back to the beginning of the current  
chapter, track, etc. then to previous chapters, tracks, etc. Press  
and hold for fast reverse scanning.  
LAN – Lights when there is an active local area network (LAN)  
connection.  
10 OUTPUT RESOLUTION  
HDMI – Lights when a device is connected via HDMI.  
Press to switch the output resolution over HDMI and component  
video outputs. See Changing the output video resolution on page 14.  
5
Display  
Shows disc status and playback information.  
Front panel display  
L
1
2
1
Lights during playback of a disc.  
2
Character display  
Shows various playback information — disc time, chapter and title  
number, etc.  
18  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
9
DISPLAY  
Remote control  
03  
Press to display information (see page 25).  
10 ANGLE  
Press to change the camera angle during BD-ROM or DVD-Video  
movie multi-angle scene playback (see page 25).  
STANDBY/ON FL  
DIMMER  
OPEN/CLOSE  
1
3
2
5
6
11 DISC NAVIGATOR/TOP MENU  
Press to display the top menu of a BD-ROM or DVD-Video disc.  
When playing a DVD-R/-RW disc, press to display/exit the Disc  
Navigator.  
HOME MEDIA  
GALLERY  
4
12 POPUP MENU/MENU  
BD-ROM: Press to display/hide the pop-up menu.  
DVD-Video: Press to display the disc menu (if there is one).  
CLEAR  
AUDIO  
ENTER  
OUTPUT  
RESOLUTION  
SUBTITLE ANGLE  
DISPLAY  
13 /// and ENTER  
Use to navigate on-screen displays and menus. Press ENTER to  
select an option or execute a command.  
9
10  
12  
7
8
POPUP MENU  
MENU  
DISC NAVIGATOR  
TOP MENU  
14 HOME MENU  
Press to display the player’s Home Menu, from which you can  
access most of the player’s functions.  
11  
13  
ENTER  
HOME  
MENU  
RETURN  
YELLOW  
14  
16  
17  
15  
15 RETURN  
Press to return to a previous screen.  
RED  
GREEN  
BLUE  
16 Red/Green/Blue/Yellow  
Use to navigate BD-ROM menus.  
17 Playback controls  
PLAY MODE  
PHOTO ZOOM  
 : Press to start reverse/forward scanning.  
: Press to start or resume playback.  
: Press to pause playback; press again to restart.  
18  
21  
19  
20  
VIDEO  
ADJUST  
TV CONTROL  
INPUT  
SELECT  
CHANNEL VOLUME  
: Press to stop playback (you can resume playback by pressing  
).  
 : Press to jump to the start of the previous/next chapter/  
track.  
BD PLAYER  
 /  
: Use for slow motion and step frame (see  
1
STANDBY/ON  
page 24).  
Press to switch the player on or into standby.  
18 PLAY MODE  
Press to change the Play Mode (repeat play, for example) (see  
page 24).  
2
OPEN/CLOSE  
Press to open or close the disc tray.  
3
FL DIMMER  
19 PHOTO ZOOM  
Press to zoom the screen when displaying a still image (see  
page 25).  
Press to change the brightness of the display. When the display and  
other indicators are off, the FL OFF indicator (page 18) lights.  
4
Number buttons  
Use to enter title, chapter or track numbers, etc.  
20 VIDEO ADJUST  
Press to display the Video Adjust screen (see page 39).  
CLEAR: Press to clear a numeric entry, etc.  
ENTER: Press to select an option or execute a command.  
HOME MEDIA GALLERY  
21 TV CONTROL buttons  
See also Setting up the remote to control your TV on page 48.  
: Press to turn the TV on or into standby.  
VOLUME +/–: Use to adjust the volume.  
5
Press to display the Home Media Gallery screen (see page 32).  
6
OUTPUT RESOLUTION  
CHANNEL +/–: Use to select TV channel.  
Press to switch the output resolution over HDMI and component  
video outputs (see pages 14 and 25).  
INPUT SELECT: Press to change the input function of the TV.  
7
AUDIO  
Press to select the audio channel or language (see page 25).  
8
SUBTITLE  
Press to select a subtitle display (see page 25).  
19  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 4  
04  
Getting Started  
Switching on and setting up  
4
Press ENTER to start setting up using the Setup Navigator.  
Setup Navigator  
When you switch the player on for the first time the Setup Navigator  
screen appears. We recommend using this to make a few basic  
player settings.  
Before using, make some simple  
settings for the BD player.  
Start  
Cancel  
Please use the Initial Setup if you  
want to make more detailed settings.  
STANDBY/ON  
If you don’t want to use the Setup Navigator, press to select  
Cancel, then press ENTER to exit the Setup Navigator.  
5
Use the / buttons to select the output video resolution  
then press ENTER.  
Setup Navigator  
Output Video Resolution  
Auto  
480i  
ENTER  
480p  
720p  
1080i  
1080p  
Source Direct  
1
2
Switch on your TV and set the video input to this player.  
If you connected this player to your TV using the HDMI connector,  
select from Auto, 480i (interlaced), 480p (progressive), 720p,  
1080i, 1080p, or Source Direct, then skip to step 7 (the aspect ratio  
will automatically be set to 16:9 (Widescreen)). Generally, the Auto  
setting is recommended.  
Press the STANDBY/ON button on the remote control or  
the front panel to switch on.  
• It can take up to one minute for the unit to turn on.  
• When you switch on for the first time, your TV should display the  
Setup Navigator screen. (If the Setup Navigator doesn’t appear,  
you can also access it from the Initial Setup menu; see page 43).  
Setup Navigator  
Output Video Resolution  
• When you have this unit connected to a plasma display that is  
compatible with HDMI Control, language settings are imported  
from the plasma display’s OSD settings before Setup Navigator  
begins.  
S-Video/Video only  
480i  
480p  
720p  
1080i  
Don't Know  
3
Use the / buttons to choose a language, then press  
If you’re using an S-Video or composite video connection, select S-  
Video/Video only.  
ENTER.  
Setup Navigator  
If you’re using a component video connection, match the output  
setting with the capabilities of your TV. Select from: 480i, 480p,  
720p, 1080i or Don’t Know. If you select 720p or 1080i, skip the  
next step since the aspect ratio will automatically be set to  
16:9 (Widescreen).  
Language  
English  
français  
Español  
6
Use the / buttons to select the aspect ratio of your TV  
then press ENTER.  
Setup Navigator  
TV Aspect Ratio  
16:9 (Widescreen)  
4:3 (Standard)  
If you have a widescreen TV, select 16:9 (Widescreen); if you have a  
standard size TV, select 4:3 (Standard).  
20  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
7
Select ‘Finish Setup’ to accept the settings and exit the  
4
Use the on-screen keypad to enter a name for the player.  
04  
Setup Navigator, or ‘Go Back’ to go through the settings again.  
This is how the player will appear to connected devices on the local  
area network.  
Setup Navigator  
Device  
name input  
Setup is complete!  
Enjoy using your BD player!  
Finish Setup  
Go Back  
SHFT  
SPC  
DEL  
CLR  
You can run the Setup Navigator at any time by selecting it from the  
Options menu — see page 43.  
• Use the /// buttons and ENTER to select characters  
About the screen saver  
If the player is stopped or paused for more than five minutes with no  
other operation, the screen saver starts.  
from the keypad.  
• Select SHFT to toggle between upper and lower case.  
• Select SPC to insert a space.  
Once the screen saver has started, pressing any button on the front  
panel or remote will clear it and return the player to normal  
operation.  
• Select DEL to delete the character at the current cursor position  
in the name field.  
The screen saver starts for CDs and music files after five minutes  
pass without any commands input, whether or not playback has  
been paused or stopped.  
• Select CLR to clear the name field.  
5
Select ‘DONE’ to register the name and exit the input  
screen.  
Select CANCEL to close the keypad without registering the name.  
Using the on-screen displays  
6
Select ‘IP Configuration’ then ‘Next Screen’ to display the  
IP configuration screen.  
This player makes extensive use of graphical on-screen displays  
(OSDs). You should get used to the way these work as you’ll need to  
use them when setting up the player, using some of the playback  
features, and when making more advanced settings for audio and  
video.  
Initial Setup  
Video Out  
Audio Out  
Language  
Parental Lock  
Network  
IP Configuration  
Auto set IP Address  
Off  
All the screens are navigated in basically the same way, using the  
cursor buttons (///) to change the highlighted item and  
pressing ENTER to select it.  
IP Address  
192 255 255  
.
0
0
0
.
.
.
.
Subnet mask  
Default gateway  
255 255 255  
.
.
.
Speakers  
Options  
192 168  
.
1
Set the IP address.  
Button  
What it does  
Display/exit the on-screen display  
HOME MENU  
///  
ENTER  
7
Set ‘Auto set IP Address’ to ‘On’.  
If there is a DHCP server on the local area network (LAN), this player  
will automatically be allocated an IP address. If you’re using a  
broadband router or broadband modem that has a DHCP (Dynamic  
Host Configuration Protocol) server function, select On. The IP  
address will automatically be determined.  
Changes the highlighted menu item  
Selects the highlighted menu item  
Returns to the previous menu or screen without  
saving changes  
RETURN  
If there is no DHCP server on the network and you select On, this  
player will use its own Auto IP function to determine the IP address.  
Tip  
• If you want to set the IP address manually, select Off then set  
the IP Address, Subnet mask and Default gateway: Use the /  
// buttons to select a field; use the number buttons to  
enter a value. Press ENTER to finish and exit the screen.  
• Information at the bottom of an OSD screen explains the  
currently selected menu item and shows which buttons can be  
used for that screen.  
8
Press HOME MENU to exit the Initial Setup menu.  
Setting up for network use  
You should now be able to use the Home Media Gallery (accessible  
from the Home Menu). See Using the Home Media Gallery on  
page 32 for more.  
If you’ve connected this player to a local area network (LAN) you may  
need to make a few settings before you can use the Home Media  
Gallery feature over the network.  
• For information on DHCP refer to the network device’s operating  
instructions.  
• You may need to contact your service provider or network  
administrator when manually entering an IP address.  
1
2
3
Press HOME MENU and select ‘Initial Setup’.  
Select ‘Network’.  
Select ‘Device Name’ then ‘Next Screen’.  
21  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
When playing BD-ROM discs:  
Playing movies, music and photos  
04  
• Commercially produced BD-ROM movie discs often go straight  
to the disc menu when playback is started (sometimes preceded  
by an opening sequence). Navigate through the disc menu  
using the cursor keys (///) and the ENTER button. You  
can also use the number buttons to select numbered items in  
some menus.  
Using this player, you can enjoy watching movies, listening to music  
and browsing photos, from DVD discs or from a media server on the  
network. How you navigate, browse and play content varies  
according to the format of the content and the media:  
• To play a DVD movie disc (i.e., one containing DVD-Video  
application format), see Playing BD/DVD movies and Audio CD  
below.  
• To get back to the top menu, press TOP MENU.  
• Some BD-ROM discs feature pop-up menus that do not  
interrupt playback; press POPUP MENU/MENU to access  
these.  
• To play a DVD-R/-RW disc recorded with movie, music or photo  
files, turn to Using the Disc Navigator on page 27.  
When playing DVD-Video discs:  
• To play content from a media server, please refer to Using the  
Home Media Gallery on page 32.  
• Commercially produced DVD movies often go straight to the  
disc menu when playback is started (sometimes preceded by an  
opening sequence). Navigate the disc menu using the cursor  
(///) and ENTER buttons. You can also use the number  
buttons to select numbered items in some menus.  
Playing BD/DVD movies and Audio CD  
The basic playback controls for playing BD/DVD movies and Audio  
CD discs are covered here. Further functions are detailed in the next  
chapter.  
• To get back to the top menu, press TOP MENU.  
• To get back to the disc menu, press POPUP MENU/MENU.  
When playing Audio CDs:  
• For more information see Playback controls on page 23.  
STANDBY/ON  
OPEN/CLOSE  
5
When you’ve finished using the player, eject the disc and  
switch the player back into standby.  
• To open/close the disc tray, press OPEN/CLOSE. Remove the  
disc before putting the player into standby.  
• Press STANDBY/ON to switch the player into standby.  
POPUP MENU  
MENU  
TOP MENU  
ENTER  
1
If the player isn’t already on, press STANDBY/ON to  
switch it on.  
Also turn on your TV and make sure that it is set to the correct video  
input.  
2
Press OPEN/CLOSE to open the disc tray.  
3
Load a disc.  
Load a disc with the label side facing up, using the disc tray guide  
to align the disc (if you’re loading a double-sided DVD-Video disc,  
load it with the side you want to play face down).  
The player will take a short while to read the disc, after which the  
disc type will show up in the front panel display.  
4
Press to start playback.  
• Use the (pause) and buttons to pause or stop playback. You  
can resume playback in either case by pressing . See also  
Resuming playback on page 23.  
• See Playback controls on page 23 for other controls available  
during playback.  
22  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
• Some actions in the Disc Navigator/Home Media Gallery (such  
as changing the Browse category) will cause the resume  
position to be lost.  
Playback controls  
04  
Scanning video and audio  
CLEAR  
ENTER  
You can fast-scan BD/DVD movies or Audio CDs, forward or  
backward at various speeds.  
OUTPUT  
RESOLUTION  
AUDIO  
SUBTITLE ANGLE  
DISPLAY  
1
During playback, press or to start scanning.  
There is no sound while scanning video and audio.  
2
Press repeatedly to increase the scanning speed.  
The scanning speed is shown on-screen.  
3
To resume normal playback, press .  
Depending on the disc, normal playback may automatically resume  
when a new chapter is reached on a BD/DVD movie disc.  
Selecting titles, chapters and tracks directly  
PLAY MODE  
PHOTO ZOOM  
CLEAR  
ENTER  
Resuming playback  
You can select titles, chapters and tracks directly with BD, DVD  
movies and Audio CDs .  
1
The resume function offers a convenient way to restart playback  
from where you stopped it previously.  
Use the number buttons to select a title, chapter or track.  
• If the disc is stopped, playback starts from the selected title or  
track.  
Resuming playback of BD/DVD movies and Audio CDs  
If you stop playback before the end of the disc, the playback stop  
position is stored so that you can resume watching the disc from the  
same place later.  
• If the disc is playing, playback jumps to the start of the selected  
chapter or track.  
• To resume playback, press . Playback will start from the stored  
resume position. For Audio CDs, playback resumes from the  
beginning of the track.  
Skipping content  
• Press again to cancel the resume function.  
You can skip over content during playback of BD and DVD movies,  
Audio CDs, movie and song files, and photo slideshows.  
Note  
1
During playback, press or to skip content.  
• When playing a BD or DVD movie, playback jumps to the start of  
the previous/next title, chapter or track. (If the disc is stopped,  
playback will start.)  
In the following case, the resume position is cleared:  
• Eject the disc.  
• Use Home Media Gallery/Disc Navigator.  
• Switch the player off (DVD resume position remains saved).  
• During movie or song file playback, the previous or next file will  
start playing.  
• Certain BD-ROM discs cannot be restarted from the position in  
which they are paused.  
• During photo slideshow playback, you can skip to the previous  
or next photo.  
Resuming playback of movie, music and photo files  
Movie and music files are resumed from the start of the title/track  
(rather than the stop position within the title/track): photo slideshow  
playback is resumed from the photo file within the slideshow.  
• If you interrupt playback of a movie or slideshow by pressing  
RETURN to display the Disc Navigator or Home Media Gallery  
screen, you can still resume playback of the same title/  
slideshow photo using the button, regardless of what is  
highlighted on the screen. (Use the ENTER button to start  
playback of the currently highlighted item in the Disc Navigator/  
Home Media Gallery.)  
23  
En  
Note  
1 With some titles on BD-ROM or DVD-Video discs it is not possible to jump to the start of the selected title or chapter.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Play Mode option compatibility  
Playing video in slow motion  
04  
The available options depend on what kind of disc/file is playing  
1
(=available/=unavailable):  
You can play BD and DVD movies at different forward slow motion  
speeds.  
Disc/file type  
Play Mode  
DVD  
PC File  
PC File  
PC File  
Audio  
CD  
Option  
BD-ROM  
-Video (Music) (Movie) (Photo)  
1
During playback, press to start slow motion playback.  
• The slow motion speed is shown on-screen.  
Time Search  
Title Search  
Repeat Chapter  
Repeat Title  
Repeat Track  
Repeat All  
• There is no sound during slow motion playback.  
Press repeatedly to change the slow motion speed.  
To resume normal playback, press .  
Depending on the disc, normal playback may automatically resume  
when a new chapter is reached.  
2
3
Random  
Video step forward and step reverse  
Repeat Off  
You can use step forward and step reverse when playing a BD or  
DVD movie.  
Using time search  
1
2
3
During playback, press (pause).  
Press or to move the video forward or back one step.  
To resume normal playback, press .  
CLEAR  
ENTER  
When playing a BD or DVD movie, normal playback may  
automatically resume when a new chapter is reached.  
You can navigate directly to a certain point in a BD or DVD movie, or  
in a movie file.  
1,2  
Changing the Play Mode  
PLAY MODE  
1
During playback, press PLAY MODE and select ‘Time  
Search’.  
2
Use the number buttons to enter a time in hours, minutes  
Use the PLAY MODE button on the remote control to select one of  
the various playback modes for BD and DVD movie discs, Audio CD  
discs, movie and music files and photo slideshows.  
and seconds for playback to resume from.  
For a BD or DVD movie, the time you enter should be the time into  
the currently playing title. For a movie file it will be the playback time  
into the file.  
You can’t select a Play Mode while a BD or DVD disc menu is being  
displayed, or while playing some BD/DVD movie titles, Audio CD, or  
movie and music files and photo slideshows.  
• For example, press 4, 5, 0, 0 to have playback start from 45  
minutes into the title/file. For 1 hour, 20 minutes, press 1, 2, 0,  
0, 0.  
During playback, press PLAY MODE to change the Play  
• Press CLEAR to clear the input.  
Mode.  
See Play Mode option compatibility below for the options available  
with the disc/file you’re playing.  
3
Press ENTER to start playback from the time you entered.  
Using title search  
Time Search (see Using time search below)  
Title Search (see Using title search below)  
Repeat Chapter (repeats the current chapter)  
Repeat Title (repeats the current title)  
Repeat Track (repeats the current track)  
CLEAR  
ENTER  
T
1
You can directly jump to the start of any title on a BD-ROM or  
DVD-Video.  
1,2  
1
During playback, press PLAY MODE and select ‘Title  
Repeat All (repeats the current browse list)  
Search’.  
Random (play tracks from an Audio CD, music files, or  
photo files in a random order)  
2
Use the number buttons to select a title.  
Press CLEAR to clear the input.  
Repeat Off (cancels the repeat and random modes)  
3
Press ENTER to start playback of the title you selected.  
The current Play Mode is displayed on-screen. Press CLEAR to  
resume normal playback.  
Note  
24  
1 With some BD-ROM and DVD-Video titles, it is not possible to select any Play Mode options.  
2 This function may not be supported depending on the content or server software.  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
• There may be a short delay after pressing the button for the  
audio channel to change.  
Switching camera angles  
ANGLE  
04  
Some BD and DVD movies feature scenes shot from two or more  
angles — check the disc box for details.  
Tip  
• Even when multiple audio streams are included in a movie file,  
you cannot select from among them while playing back of a  
movie file.  
During playback, press  
ANGLE to switch the angle.  
• There may be a short delay after pressing the button before the  
angle changes.  
• To set audio language preferences, see page 42.  
• Playback resumes if the angle is changed while paused.  
Displaying disc or file information  
DISPLAY  
Zooming the screen  
PHOTO ZOOM  
Various track, chapter and title information, as well as the video  
transmission rate for DVD and BD movies, can be displayed  
on-screen. The information available depends on the type disc or  
file, and whether it’s playing or stopped.  
During playback of a photo slideshow you can zoom the screen to  
2x view or 4x view.  
1
During playback, press PHOTO ZOOM to change the zoom.  
Press DISPLAY to show/switch the information displayed.  
Press repeatedly to cycle through: normal 2x zoom 4x zoom.  
3
Press DISPLAY repeatedly to change the displayed information.  
2
Use the cursor keys (///) to move the zoomed area  
Play  
DVD-VIDEO  
1–2  
Chapter  
Title Total  
0 . 03 . 10  
12  
1h 28m 03s  
Repeat Chapter  
of the screen.  
The zoom mode is canceled when you stop playback.  
DVD-Video Play display 1  
Switching subtitles  
SUBTITLE  
Play  
1–2  
0 . 03 . 12  
Repeat Chapter  
DVD-VIDEO  
Chapter Time 0 . 02 . 43  
Chapter Total 0 . 03 . 16  
10 . 08 Mbps  
Some BD and DVD movie discs have subtitles in one or more  
languages; the disc box will usually tell you which subtitle  
languages are available.  
DVD-Video Play display 2  
Switching the output video resolution  
1
1
Press  
SUBTITLE repeatedly to select a subtitle option.  
The current subtitle language/option is displayed on-screen and in  
the front panel display.  
Subtitle  
1/2  
English  
OUTPUT  
RESOLUTION  
You can switch the output video resolution for HDMI and  
component output.  
2
To switch the subtitle display off, press  
SUBTITLE then  
CLEAR.  
There may be a short delay after pressing the button before the  
subtitles change.  
Press OUTPUT RESOLUTION repeatedly to select an output  
video resolution.  
The current source and output video resolution are shown  
on-screen.  
Tip  
Output Video Resolution: Source Direct  
(1080 / 24p)  
Source: 1080 / 24p  
• To set subtitle language preferences, see page 42.  
Switching audio streams/channels  
Note  
AUDIO  
• Depending on your display, some of the settings may result in  
the picture disappearing. In this case, press  
OUTPUT RESOLUTION repeatedly until the picture re-appears.  
Some BD and DVD movie discs contain multiple audio streams that  
you can select on playback. These might be different audio  
languages and/or different audio formats (such as a DTS  
5.1-channel sound track and a Dolby Digital 2-channel sound track).  
• See Changing the output video resolution on page 14 for more  
information.  
Press  
AUDIO repeatedly to select an audio channel/  
2
stream option.  
The current option is shown on-screen.  
Audio:  
1/2 Dolby Digital 2/0ch  
English  
Switching audio languages on a BD/DVD movie  
Note  
1 Some discs only allow you to change the subtitle language from the disc menu. Press POPUP MENU/MENU to access.  
2 Some discs only allow you to change the audio language from the disc menu. Press POPUP MENU/MENU to access.  
3 There may be instances with some discs where no information can be displayed.  
25  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
• My AV receiver is definitely compatible with 96 kHz Linear PCM  
audio, but it doesn’t seem to work with this player. What’s wrong?  
Frequently Asked Questions  
04  
192 kHz/96 kHz BD and 96 kHz DVD discs only output digital  
audio downsampled to 48 kHz through the optical and coaxial  
outputs.  
• Why won’t the disc I loaded play?  
First check that you loaded the disc the right way up (label side  
up), and that it’s clean and not damaged. See Taking care of your  
player and discs on page 46 for information on cleaning discs.  
96 kHz 7.1ch BD discs only output digital audio downsampled to  
48 kHz through HDMI output when video output is 480i or 480p  
over HDMI. These are not malfunctions.  
If a disc loaded correctly won’t play, it’s probably an  
incompatible format or disc type. See Disc/content format  
playback compatibility on page 9 for more on disc compatibility.  
• Why is the mono audio on some discs rather quiet compared to  
other discs?  
When mono audio is split into the L and R channels, there may  
be a small loss of volume.  
• There’s no picture!  
Your TV is probably not compatible with the selected video  
output resolution. Check your TV for compatibility with  
progressive scan video and higher resolutions. Press the  
OUTPUT RESOLUTION button to switch the video output. See  
also Changing the output video resolution on page 14.  
• There’s no sound when connected using HDMI!  
You won’t hear any sound from the HDMI output if your  
component is only DVI/HDCP-compatible.  
• I can’t see any picture, or get high definition video output when  
playing some BDs!  
• I can’t connect to my local area network!  
First of all check the settings of the media server you’re using.  
Make sure that if you made the network settings automatically  
on this player then you also select auto setup on the server.  
(Likewise, if you made the settings manually on the server, you  
should set up this player manually.)  
When playing some discs, there may be no composite video,  
S-Video and/or component video output, or high-definition  
content may be converted to standard-definition 480i or 480p  
component output. This is for content protection. To view the  
disc, connect the player to an HDMI-compatible display. See  
Connecting for HDMI output on page 13.  
• I have a widescreen TV so why are there black bars at the top and  
bottom of the screen when I play some discs?  
Some movie formats are such that even when played on a  
widescreen TV, black bars appear at the top and bottom of the  
screen. This is not a malfunction.  
• I’ve connected to a HDMI/DVI compatible component but I can’t  
get any signal and the front panel HDMI indicator won’t light!  
Make sure that you’ve selected this player as the HDMI input in  
the settings for the component you’re using. You may need to  
refer to the instruction manual of the component to do this.  
An HDMI connection can only be made with other HDMI  
components, or a High-bandwidth Digital Content Protection  
(HDCP)-compatible DVI component. See Connecting for HDMI  
output on page 13 for more on HDMI compatibility.  
• There’s no picture from the HDMI output!  
Make sure the output resolution of this player matches that of  
the component you have connected using HDMI. See Changing  
the output video resolution on page 14.  
• Why is the playback sample rate of the DVD only 48 kHz instead of  
96 kHz?  
Playback sample rate of the audio is downsampled to 48 kHz.  
26  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 5  
05  
Using the Disc Navigator  
Use the Disc Navigator to browse through the PC files on a DVD-R/  
-RW disc to find what you want to play. You can use the Disc  
Navigator when a disc is playing or stopped.  
Movie Navigator  
The movie section of the Disc Navigator allows you to browse and  
play all the compatible movie files stored on the loaded DVD-R/-RW  
disc (non-movie files are not displayed).  
Important  
See also File compatibility on page 9 for more on compatible file  
types.  
• It’s not possible to use the Disc Navigator with DVD-Video discs,  
or with Audio CDs.  
1
If you haven’t already done so, select ‘Disc Navigator’ from  
Introduction  
the Home Menu, then ‘Movies’.  
You should see a list of all the movie files found on the disc, together  
with their playing times.  
Most of the features described in this chapter make use of  
on-screen displays. Navigate these using the /// and  
ENTER. To go back to the previous menu or screen, use the RETURN  
button. The button guide at the bottom of every screen shows which  
buttons do what.  
20 items  
All Movies  
Scallop-man 3  
Closer  
1:31  
1:02  
1:31  
1:25  
1:33  
1:26  
1:57  
1:36  
1:18  
1:18  
Discount store  
School of legend  
Advance in the future part-2  
The EEL  
Date: 2006  
Genre: Action  
Format:WMV  
World Baseball  
Dream on the way  
Finding a southpaw  
Dear Customer  
DISC NAVIGATOR  
TOP MENU  
• When the movie length cannot be determined, it is displayed as  
“-:--”.  
ENTER  
HOME  
MENU  
RETURN  
2
Use the / buttons to change the current selection  
(highlighted in yellow).  
On the left side of the screen you can see file information, such as  
the genre, date and file format, for the current selection.  
3
Press ENTER to play the currently highlighted movie.  
1
Press HOME MENU and select ‘Disc Navigator’ from the  
Press to start or resume playback from the last title played.  
on-screen display.  
Alternatively, press DISC NAVIGATOR.  
Displaying the Movie Options menu  
Home Menu  
Press to display the Movie Options menu:  
Disc Navigator  
Home Media Gallery  
Video/Audio Adjust  
Initial Setup  
20 items  
All Movies  
Scallop-man 3  
Closer  
Movie Options  
Play from Beginning  
Add to Quicklist  
Discount store  
School of legend  
Advance in the future part-2  
The EEL  
Date: 2006  
Genre: Action  
Format:WMV  
World Baseball  
Dream on the way  
Finding a southpaw  
Dear Customer  
2
Select ‘Movies’, ‘Photos’ or ‘Music’.  
See the sections below for more information on each of these.  
Play from Beginning: Play the selected movie from the  
beginning.  
Disc Navigator  
Add to Quicklist: Add the selected movie to your Quicklist. The  
Quicklist feature is a useful way to organize movie files for handy  
selection and playback. The Quicklist can contain up to 25 movies.  
1
Movies  
Photos  
Music  
3
Press HOME MENU to exit the Disc Navigator screen.  
27  
En  
Note  
1 Quicklists are lost when you exit Movie Navigator.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Searching movies  
Displaying the browse menu  
05  
From the Search sub-menu you can enter a few (up to 20) characters  
of a movie title or genre. As each character is entered into the  
search field the search results are dynamically updated, narrowing  
down the list of movies until you can see the one you’re looking for.  
Press to display the browse menu:  
20 items  
All Movies  
Scallop-man 3  
1:31  
1:02  
1:31  
1:25  
1:33  
1:26  
1:57  
1:36  
1:18  
1:18  
Closer  
Loading ...  
Discount store  
School of legend  
Advance in the future part-2  
Search Results  
4 items  
Scallop-man 3  
Say No  
1:31  
1:02  
1:31  
1:33  
All Movies  
The EEL  
Browse  
School of legend  
Seesaw  
World Baseball  
Search  
Sort  
Dream on the way  
Finding a southpaw  
Dear Customer  
S _  
Depending on the browse menu, certain options may not be  
selectable.  
Enter  
Home Menu  
Exit  
Select  
All Movies: Display all movie files found on the disc.  
• Use the /// and ENTER buttons to select characters  
from the keypad.  
Browse: Browse movies by Genre, Quicklist, or Folders. See  
also Browsing movies below.  
• Select SHFT to toggle between upper and lower case.  
Search: Find a movie by entering a name (or a few letters) to  
search for. The search results are narrowed down as you enter  
more letters. See also Searching movies below.  
• Select SPC to insert a space.  
• Select DEL to delete the character at the current cursor position  
in the search field.  
Sort: Sort movies by date (oldest first or most recent first) or  
alphabetically by title or genre (‘A’ first or ‘Z’ first).  
• Select CLR to clear the search field.  
• Select DONE to close the keypad and select movies or genres  
from the search results; select CANCEL to close the keypad and  
clear the search results.  
Browsing movies  
The browse sub-menu gives you three ways to browse movies.  
All Movies  
20 items  
Photo Navigator  
Scallop-man 3  
Closer  
1:31  
1:02  
1:31  
1:25  
1:33  
1:26  
1:57  
1:36  
1:18  
1:18  
Discount store  
School of legend  
Advance in the future part-2  
The EEL  
The photo section of the Disc Navigator allows you to browse and  
display all the compatible photo files found on the loaded DVD-R/  
-RW disc (non-photo files are not displayed).  
Go back  
Genres  
Quicklist  
Folders  
World Baseball  
Dream on the way  
Finding a southpaw  
Dear Customer  
See also File compatibility on page 9 for more on compatible file  
types.  
Go back: Return to the previous menu.  
1
If you haven’t already done so, select ‘Disc Navigator’ from  
the Home Menu, then ‘Photos’.  
You should see a list of folders/photo files from the disc.  
Genre: Display all movie genres and how many movies are in  
each one. Select a genre and press ENTER to see the list of  
movies in that genre.  
2
Use the / buttons to change the current selection  
Quicklist: Display a list of all the movies currently in your  
Quicklist. Press to display the Movie Options menu, where  
you can start playback or remove movies from the Quicklist:  
(highlighted in yellow).  
Folders  
6 items  
Folder1  
Folder2  
File1  
20 items  
Quicklist  
Scallop-man 3  
Closer  
Movie Options  
Play from Begining  
Remove  
File2  
Discount store  
School of legend  
Advance in the future part-2  
The EEL  
File3  
Date: 2006  
Genre: Action  
Format:WMV  
File4  
World Baseball  
Dream on the way  
Finding a southpaw  
Dear Customer  
3
Select a folder and press ENTER to see the list of photos and  
subfolders within the folder.  
Folders: Display a list of folders and movie files. Select a folder  
and press ENTER to see the list of subfolders/movies files in that  
folder.  
30 items  
Folder1  
Go back  
file_001  
file_002  
file_003  
file_004  
file_005  
file_006  
file_007  
file_008  
file_009  
28  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4
Use the / buttons to change the current selection  
Browsing photos  
The browse sub-menu gives you several ways to browse photos.  
05  
(highlighted in yellow).  
• Press ENTER to start full-screen slideshow playback from the  
currently selected photo.  
30 items  
Folder1  
• Press to start or resume slideshow playback from the last  
photo displayed.  
Go back  
file_001  
file_002  
file_003  
file_004  
Displaying the Photo Options menu  
Go back  
file_005  
Date  
file_006  
Quicklist  
file_007  
Folders  
file_008  
Press to display the Photo Options menu.  
• Press ENTER to display the Photo Options menu when  
displaying photos in thumbnail view.  
file_009  
• Go back: Return to the previous menu.  
• Date: Browse photos as thumbnails by date (year and month).  
Select a year then press ENTER to further browse by month.  
Select a month and press ENTER to see the photos taken that  
month.  
30 items  
Folder1  
Go back  
file_001  
file_002  
file_003  
file_004  
file_005  
file_006  
file_007  
file_008  
file_009  
Photo Options  
Slideshow  
Add to Quicklist  
Date: 1/23/2006  
Resolution: 196 x 298  
Format: JPEG  
Quicklist: Display thumbnails of all the photos currently in your  
Quicklist. Press ENTER to display the Photo Options menu,  
from where you can start slideshow playback or remove photos  
from the Quicklist:  
Slideshow: Start full-screen slideshow playback from the  
currently selected photo. During the slideshow, press to  
advance to the next photo; to go back to the previous photo;  
(pause) to pause the slideshow; to stop and exit the  
slideshow; PHOTO ZOOM to enlarge the picture on the screen.  
25 items  
Quicklist  
Photo Options  
Slideshow  
Remove  
File: sample.jpg  
Date: 1/23/2006  
Resolution: 196 x 298  
Format: JPEG  
Add to Quicklist: Add the selected photo to your Quicklist. The  
Quicklist feature is a useful way to organize photos for handy  
selection and slideshow playback. The Quicklist can contain up  
1
to 25 photos.  
Folders: Display a list of folders and photo files on the disc.  
Select a folder and press ENTER to see the subfolders/photos.  
Displaying the browse menu  
Press to display the browse menu.  
• From the left-most column, press to display the browse menu  
when displaying photos in thumbnail view:  
Searching photos  
From the Search sub-menu you can enter a few (up to 20) characters  
of a photo title. As each character is entered into the search field the  
search results are dynamically updated, narrowing down the list of  
photos until you can see the one you’re looking for.  
30 items  
Folder1  
Go back  
file_001  
file_002  
file_003  
5 items  
Search Results  
file_004  
All Photos  
file_005  
Browse  
file_006  
Search  
file_007  
Sort  
file_008  
R _  
file_009  
Depending on the browse menu, certain options may not be  
selectable.  
Home Menu  
Exit  
All Photos: Display all photos found on the disc as thumbnail  
files.  
See Searching movies on page 28 for how to use the screen keypad.  
Browse: Browse photos by Date, Quicklist or Folders. See also  
Browsing photos below.  
Search: Find a photo by entering a name (or a few letters) to  
search for. The search results are narrowed down as you enter  
more letters. See also Searching photos on page 29.  
Sort: Sort photos by date (oldest first or most recent first), or  
alphabetically by name (‘A’ first or ‘Z’ first).  
29  
En  
Note  
1 Quicklists are lost when you exit Photo Navigator.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Displaying the Song Options menu  
Music Navigator  
05  
Press to display Song Options menu:  
The music section of the Disc Navigator allows you to browse and  
play all the compatible music files found on the loaded DVD-R/-RW  
disc (non-music files are not displayed).  
Acoustic Guitar  
20 items  
Song Options  
Electrified  
See also File compatibility on page 9 for more on compatible file  
types.  
End Of The Road  
Into The Arena  
Keep On Running  
Never Let You Go  
Open Your Eyes  
Pictures Of My Life  
Real Sound  
Play song  
Add to Quicklist  
Art  
A
is  
r
t
t
:
is  
P
t:  
i
D
o
e
n
p
e
e
e
c
r
he  
A
M
ll  
ode  
Stars  
Album: Remixes 81-04  
Album: Acoustic Guitar  
Genre: Alternative  
Genre: Rock  
Format:WMA  
1
If you haven’t already done so, select ‘Disc Navigator’ from  
Format:WMA  
the Home Menu, then ‘Music’.  
You should see a list of the artist names on the disc.  
Rush Street  
Take The Time  
Play Song: Play the selected song from the beginning.  
20 items  
Artists  
Add to Quicklist: Add the selected song to your Quicklist. The  
Quicklist feature is a useful way to organize music files for handy  
selection and playback. The Quicklist can contain up to 25  
All Artists  
Black Pappers  
1
2
4
1
1
1
4
2
5
Album  
Albums  
Albums  
Album  
Album  
Album  
Albums  
Albums  
Albums  
David Jack  
Eric Gilberto  
King  
1
songs.  
Michael Beck  
Pioneer All Stars  
Rock'n Roll Brothers  
The Fishes  
Displaying the browse menu  
Treetop  
Press to display the browse menu:  
2
Use the / buttons to change the current selection  
(highlighted in yellow).  
20 items  
Acoustic Guitar  
Electrified  
9:31  
8:00  
7:31  
3:55  
6:33  
5:26  
4:57  
9:36  
6:18  
6:18  
3
Press ENTER to display the album list.  
End Of The Road  
Into The Arena  
Keep On Running  
Never Let You Go  
20 items  
Pioneer All Stars  
All Songs  
Open Your Eyes  
Browse  
Pictures Of My Life  
Search  
All Albums  
Real Sound  
Sort  
Acoustic Guitar  
Best of Pioneer All Sta  
Cooking Or Eating  
Family  
rs  
20 Songs  
13 Songs  
10 Songs  
12 Songs  
18 Songs  
11 Songs  
18 Songs  
10 Songs  
13 Songs  
Rush Street  
Now Playing  
Take The Time  
Good!!  
Depending on the browse menu, certain options may not be  
selectable.  
Morning Glory  
Poker Face  
Song forYou  
Tokyo  
All Songs: Display all songs (files/tracks) found on the disc.  
Browse: Browse songs by Artists, Albums, Genres, Quicklist  
or Folders. See also Browsing songs on page 31.  
4
Select the album you want to listen to and press ENTER to  
display the song list.  
Search: Find a song by entering a name (or a few letters) to  
search for. The search results are narrowed down as you enter  
more letters. See also Searching songs on page 31.  
20 items  
Acoustic Guitar  
Electrified  
9:31  
8:00  
7:31  
3:55  
6:33  
5:26  
4:57  
9:36  
6:18  
6:18  
End Of The Road  
Into The Arena  
Keep On Running  
Never Let You Go  
Open Your Eyes  
Pictures Of My Life  
Real Sound  
Sort: Sort songs by date (oldest first or most recent first), or  
alphabetically by song title, artist, album or genre (‘A’ first or ‘Z’  
first).  
Artist: Pioneer All Stars  
Album: Acoustic Guitar  
Genre: Rock  
Format:WMA  
Now Playing: Display song information (track name, artist,  
album, genre, etc.) and playback information. See also Now  
playing song information on page 31.  
Rush Street  
Take The Time  
• When the song length cannot be determined, it is displayed as  
“-:--”.  
5
Use the / buttons to change the current selection  
(highlighted in yellow).  
On the left side of the screen you can see file information, such as  
the artist and album name, genre and file format, for the current  
selection.  
6
Press ENTER to play the currently highlighted music.  
The display shows the Now Playing screen.  
• Press to start or resume playback from the last track played  
on the Now Playing screen.  
30  
En  
Note  
1 Quicklists are lost when you exit Music Navigator.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Browsing songs  
The browse sub-menu gives you various ways to browse songs.  
Now playing song information  
The Now Playing screen shows detailed information about the song  
playing, including:  
05  
• Artist and song title  
• Progress bar (elapsed time and song length)  
• Album name  
20 items  
Acoustic Guitar  
Electrified  
9:31  
8:00  
7:31  
3:55  
6:33  
5:26  
4:57  
9:36  
6:18  
6:18  
End Of The Road  
Into The Arena  
Keep On Running  
Never Let You Go  
Open Your Eyes  
Pictures Of My Life  
Real Sound  
• Genre  
All Songs  
Browse  
Search  
• File format  
Sort  
Rush Street  
Now Playing  
• Browse menu  
Take The Time  
• Play status  
Go back: Return to the previous menu.  
• Play mode  
Artists: Display a list of artists, and how many albums are  
associated with each. Select an artist and press ENTER to see  
the album list by that artist.  
• Next/Previous song names  
Now Playing  
Albums: Display a list of albums, and how many songs are  
associated with each. Select an album and press ENTER to see  
the list of songs on that album.  
Pioneer All Stars  
Real Sound  
Acoustic Guitar  
Genre: Rock  
Format: MP3  
3:10 / 5:51  
Genres: Display all music genres, and how many songs are in  
each one. Select a genre and press ENTER to see the list of  
artists in that genre.  
All Songs  
Browse  
Search  
Sort  
Now Playing  
Previous Song  
Pictures Of My  
Next Song  
Rush Street  
Quicklist: Display a list of all the songs currently in your  
Quicklist. Press to display the Song Options menu, where  
you can start playback or remove songs from the Quicklist:  
20 items  
Quicklist  
Electrified  
Song Options  
End Of The Road  
Into The Arena  
Keep On Running  
Never Let You Go  
Open Your Eyes  
Pictures Of My Life  
Real Sound  
Play Song  
Remove  
Artist: Pioneer All Stars  
Album: Acoustic Guitar  
Genre: Rock  
Format: WMA  
Rush Street  
Take The Time  
Folders: Display a list of folders and song files. Select a folder  
and press ENTER to see the list of subfolders/songs.  
Searching songs  
From the Search sub-menu you can enter a few characters (up to 20)  
of a song title, genre, artist, or album. As each character is entered  
into the search field the search results are dynamically updated,  
narrowing down the list until you can see the one you’re looking for.  
Loading ...  
4
items  
Search Results  
Scallop-man 3  
Say No  
1:31  
1:02  
1:31  
1:33  
School of legend  
Seesaw  
S _  
Enter  
Home Menu  
Exit  
Select  
See Searching movies on page 28 for how to use the screen keypad.  
31  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 6  
06  
Using the Home Media Gallery  
The Digital Living Network Alliance (DLNA) is a cross-industry  
Introduction  
organization of consumer electronics, computing industry and  
mobile device companies. Digital Living provides consumers with  
easy sharing of digital media through a wired or wireless network in  
the home.  
The Home Media Gallery allows you to browse and play movies,  
music and photos stored on media servers connected on an  
identical Local Area Network (LAN) as the player. This unit allows for  
the playing of files stored on the following:  
The DLNA certification logo makes it easy to find products that  
comply with the DLNA Interoperability Guidelines. This unit  
complies with DLNA Interoperability Guidelines v1.0.  
• PCs running Microsoft Windows XP with Windows Media  
Connect installed  
When a PC running DLNA server software or other  
DLNA-compatible device is connected to this player, some setting  
changes of software or other devices may be required. Please refer  
to the operating instructions for the software or device for more  
information.  
• PCs running Microsoft Windows Vista or XP with Windows  
Media Player 11 installed  
• DLNA-compatible digital media servers (on PCs or other  
components)  
TM  
• DLNA and DLNA CERTIFIED are trademarks and/or service  
marks of Digital Living Network Alliance.  
About network playback  
Content playable over a network  
The network playback function of this unit uses the following  
technologies:  
Even when encoded in a compatible format, some files may not play  
correctly. See File compatibility on page 9. Some functions may not  
be supported depending on the server type or version used.  
Windows Media Player 11/Windows Media Connect  
See About Windows Media Player 11/Windows Media Connect on  
page 38 for details.  
Supported file formats vary by server. As such, files not supported by  
your server are not displayed on this unit.  
For more information check with the manufacturer of your server.  
Windows Media DRM  
About playback behavior over a network  
• Playback may stall when the PC is switched off or any media  
files stored on it are deleted while playing content.  
Microsoft Windows Media Digital Rights Management (WMDRM) is  
a platform to protect and securely deliver content for playback on  
computers, portable devices and network devices. Home Media  
Gallery functions as a WMDRM 10 for networked devices.  
WMDRM-protected content can only be played on media servers  
supporting WMDRM.  
• If there are problems within the network environment (heavy  
network traffic, etc.) content may not be displayed or played  
properly (playback may be interrupted or stalled). For best  
performance, a 100BASE-TX connection between player and PC  
is recommended.  
• Content owners use WMDRM technology to protect their  
intellectual property, including copyrights. This device uses  
WMDRM software to access WMDRM-protected content. If the  
WMDRM software fails to protect the content, content owners  
may ask Microsoft to revoke the software’s ability to use WMDRM  
to play or copy protected content. Revocation does not affect  
unprotected content. When you download licenses for protected  
content, you agree that Microsoft may include a revocation list  
with the licenses. Content owners may require you to upgrade  
WMDRM to access their content. If you decline an upgrade, you  
will not be able to access content that requires the upgrade.  
• Playback performance will vary with the power and condition  
(seek time of the hard disk, etc.) of the PC being used.  
• If several clients are playing simultaneously, as the case may be,  
playback is interrupted or stalled.  
• Depending on the security software installed on a connected PC  
and the setting of such software, network connection may be  
blocked.  
• Problems with the PC may cause malfunctions.  
• This product is protected by certain intellectual property rights of  
Microsoft. Use or distribution of such technology outside of this  
product is prohibited without a license from Microsoft.  
Pioneer is not responsible for any malfunction of the player and/or  
the Home Media Gallery features due to communication error/  
malfunctions associated with your network connection and/or your  
PC, or other connected equipment. Please contact your PC  
manufacturer or Internet service provider.  
DLNA  
About the network settings  
This unit uses DHCP and Auto IP functionality to make all the  
network settings automatically.  
If you are using a broadband router or a broadband modem with a  
DHCP server function, setup should be completely automatic with  
no manual settings required.  
TM  
• DLNA CERTIFIED Audio/Video/Image Player  
32  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Using the Home Media Gallery  
Movie Navigator  
06  
Before using the Home Media Gallery, make sure that you have  
connected the player to the network and made the necessary  
settings. See Network connection on page 16 and Setting up for  
network use on page 21 for more information.  
From the movie section of the Home Media Gallery you can browse  
and play all the compatible movie files found on your local area  
network (non-movie files are not displayed).  
See also File compatibility on page 9 for more on compatible file  
types.  
HOME MEDIA  
GALLERY  
1
If you haven’t already done so, select ‘Home Media Gallery’  
from the Home Menu, then ‘Movies’.  
You should see a list of all the movie files found on the selected  
server, together with their playing times.  
1214 items  
All Movies  
Scallop-man 3  
Closer  
1:31  
1:02  
1:31  
1:25  
1:33  
1:26  
1:57  
1:36  
1:18  
1:18  
Discount store  
School of legend  
Advance in the future part-2  
The EEL  
Date: 12/01/2006  
Genre: Adventure  
Format:WMV  
ENTER  
HOME  
MENU  
RETURN  
World Baseball  
Dream on the way  
Finding a southpaw  
Dear Customer  
1
Press HOME MENU and select ‘Home Media Gallery’ from  
• When the movie length cannot be determined, it is displayed as  
“-:--”.  
the on-screen display.  
2
Use the / buttons to change the current selection  
Home Menu  
(highlighted in yellow).  
On the left side of the screen you can see file information, such as  
the genre, date and file format, for the current selection.  
Disc Navigator  
Home Media Gallery  
Video/Audio Adjust  
Initial Setup  
3
Press ENTER to play the currently highlighted movie.  
Press to start or resume playback from the last title played.  
Displaying the Movie Options menu  
Press to display the Movie Options menu:  
• Alternatively, press HOME MEDIA GALLERY.  
• The Home Media Gallery is only available when the network or  
server contains movies, photos or music files.  
1214 items  
All Movies  
Scallop-man 3  
Movie Options  
Closer  
Play from Beginning  
Add to quicklist  
2
Select ‘Movies’, ‘Photos’ or ‘Music’.  
Discount store  
School of legend  
Advance in the future part-2  
The EEL  
Date: 12/01/2006  
Genre: Adventure  
Format: WMV  
Home Media Gallery  
World Baseball  
Dream on the way  
Finding a southpaw  
Dear Customer  
Movies  
Photos  
Music  
Play from Beginning: Play the selected movie from the  
beginning.  
Add to Quicklist: Add the selected movie to your Quicklist. The  
Quicklist feature is a useful way to organize movie files for handy  
selection and playback. The Quicklist can contain up to 25  
1
movies.  
• On selecting an option, a list of movies, photos or music files  
that the player finds on the selected server is displayed. From  
here you can browse, play and sort network files.  
• See the sections below for more information on each part of the  
Home Media Gallery.  
3
Press HOME MENU to exit the Home Media Gallery screen.  
Note  
1 Quicklists are lost in the following instances:  
• When you exit Movie Navigator.  
33  
• When you change the server to which you are connected.  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Searching movies  
Displaying the browse menu  
06  
From the Search sub-menu you can enter a few (up to 20) characters  
of a movie title or genre. As each character is entered into the  
search field the search results are dynamically updated, narrowing  
down the list of movies until you can see the one you’re looking for.  
Press to display the browse menu:  
1214 items  
All Movies  
Scallop-man 3  
1:31  
1:02  
1:31  
1:25  
1:33  
1:26  
1:57  
1:36  
1:18  
1:18  
Closer  
Discount store  
School of legend  
Advance in the future part-2  
4 items  
Search Results  
Scallop-man 3  
Say No  
1:31  
1:02  
1:31  
1:33  
All Movies  
The EEL  
Browse  
School of legend  
Seesaw  
World Baseball  
Search  
Dream on the way  
Sort  
Finding a southpaw  
S _  
Movie Sources  
Dear Customer  
Depending on the browse menu, certain options may not be  
selectable.  
Home Menu  
Exit  
All Movies: Display all movie files found on the selected server.  
• Use the /// and ENTER buttons to select characters  
from the keypad.  
Browse: Browse movies by Genre, Quicklist or Folders. See  
also Browsing movies below.  
• Select SHFT to toggle between upper and lower case.  
Search: Find a movie by entering a name (or a few letters) to  
search for. The search results are narrowed down as you enter  
more letters. See also Searching movies below.  
• Select SPC to insert a space.  
• Select DEL to delete the character at the current cursor position  
in the search field.  
Sort: Sort movies by date (oldest first or most recent first), or  
alphabetically by title or genre (‘A’ first or ‘Z’ first).  
• Select CLR to clear the search field.  
Movie Sources: Display servers on the network. See also Movie  
sources below.  
• Select DONE to close the keypad and select a movie or genre  
from the search results; select CANCEL to close the keypad and  
clear the search results.  
Browsing movies  
The Browse sub-menu gives you three ways to browse movies.  
Movie sources  
From the movie sources window you can see all the servers found  
on the network and change the selected server.  
1214 items  
All Movies  
Scallop-man 3  
1:31  
1:02  
1:31  
1:25  
1:33  
1:26  
1:57  
1:36  
1:18  
1:18  
Current server  
Closer  
Discount store  
School of legend  
Advance in the future part-2  
The EEL  
Go back  
Genres  
Quicklist  
Folders  
3 items  
Movie Sources  
World Baseball  
Dream on the way  
Finding a southpaw  
Dear Customer  
Family Room Media Center  
Living Room DVD Recorder  
Den Computer  
WMC  
DLNA  
WMC  
Microsoft  
Windows Media Connect  
2.0  
192.168.11.2  
Authorized  
Go back: Return to the previous menu.  
Genres: Display all movie genres and how many movies are in  
each one. Select a genre and press ENTER to see the list of  
movies in that genre.  
Pause  
SomeSongTil 3:30  
Home Menu  
Exit  
Quicklist: Display a list of all the movies currently in your  
Quicklist. Press to display the Movie Options menu, where  
you can start playback or remove movies from the Quicklist:  
• Some servers found on the network may not be available for the  
following reasons:  
– The player is collecting file information from the server.  
– There are no playable movie files on the server.  
– This player is not authorized for the server. See also  
Authorizing this player on page 38.  
24 items  
Quicklist  
Scallop-man 3  
Movie Options  
Closer  
Play from Beginning  
Remove  
Discount store  
School of legend  
Advance in the future part-2  
The EEL  
• Servers not currently available appear with a lock icon ( ) in the  
server list.  
Date: 12/01/2006  
Genre: Adventure  
Format: WMV  
World Baseball  
Dream on the way  
Finding a southpaw  
Dear Customer  
Folders: Display a list of folders and movie files. Select a folder  
and press ENTER to see the list of movies and subfolders within  
the folder. (The folder configuration may change depending on  
the server type.)  
34  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Displaying the browse menu  
From the left-most column, press to display the Browse  
Photo Navigator  
06  
The photo section of the Home Media Gallery allows you to browse  
and display all the compatible photo files found on your local area  
network (non-photo files are not displayed).  
menu:  
Summer_Vacation  
1214 items  
See also File compatibility on page 9 for more on compatible file  
types.  
1
If you haven’t already done so, select ‘Home Media Gallery’  
All Photos  
Browse  
from the Home Menu, then ‘Photos’.  
You should see a list of albums from the selected server.  
Search  
Sort  
Photo Sources  
Albums  
6 items  
Depending on the browse menu, certain options may not be  
selectable.  
Family  
My_Favorite  
School  
Sports  
All Photos: Display all photos found on the server.  
Summer_Vacation  
Winter_Vacation  
Browse: Browse photos by Albums, Date, Quicklist or Folders.  
See also Browsing photos below.  
Search: Find a photo by entering a name (or a few letters) to  
search for. The search results are narrowed down as you enter  
more letters. See also Searching photos on page 36.  
2
Use the / buttons to change the current selection  
(highlighted in yellow).  
Sort: Sort photos by date (oldest first or most recent first), or  
alphabetically by name (‘A’ first or ‘Z’ first).  
3 Press ENTER to display the selected photo list.  
Photo Sources: Display servers on the network. See also Photo  
sources on page 36.  
Summer_Vacation  
1214 items  
Browsing photos  
The Browse sub-menu gives you several ways to browse photos.  
File: sample.jpg  
Date: 12/06/2006  
Resolution: 2196  
Format: JPEG  
x
1298  
Summer_Vacation  
1214 items  
4
Use the /// buttons to change the current  
Go back  
Albums  
Date  
thumbnail selection (highlighted in yellow).  
Press to start or resume slideshow playback from the last photo  
displayed.  
Quicklist  
Folders  
Go back: Return to the previous menu.  
Displaying the Photo Options menu  
Albums: Display a list of server albums.  
Press ENTER to display the Photo Options menu:  
Date: Browse photos by date (year and month). Select a year  
then press ENTER to further browse by month. Select a month  
and press ENTER to see the photos taken that month.  
Summer_Vacation  
1214 items  
Photo Options  
Quicklist: Display thumbnails of all the photos currently in your  
Quicklist. Press ENTER to display the Photo Options menu,  
where you can start slideshow playback or remove photos from  
the Quicklist:  
Slideshow  
Add to Quicklist  
File: sample.jpg  
Date: 12/06/2006  
Resolution: 2196 x 1298  
Format: JPEG  
Quicklist  
24 items  
Photo Options  
Slideshow: Starts full-screen slideshow playback from the  
currently selected photo. During the slideshow, press to  
advance to the next photo; to go back to the previous photo;  
(pause) to pause the slideshow; to stop and exit the  
slideshow; PHOTO ZOOM to enlarge the picture on the screen.  
Slideshow  
Remove  
File: sample.jpg  
Date: 12/06/2006  
Resolution: 2196 x 1298  
Format: JPEG  
Add to Quicklist: Add the selected photo to your Quicklist. The  
Quicklist feature is a useful way to organize photos for handy  
selection and slideshow playback. The Quicklist can contain up  
1
to 25 photos.  
Note  
1 Quicklists are lost in the following instances:  
• When you exit Photo Navigator.  
35  
• When you change the server to which you are connected.  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Folders: Display a list of folders and photo files. Select a folder  
and press ENTER to see a list of photos and subfolders within  
the folder. (The folder configuration may change depending on  
the server type.)  
2
Use the / buttons to change the current selection  
06  
(highlighted in yellow).  
3
Press ENTER to display the album list.  
Searching photos  
Pioneer All Stars  
1214 items  
From the Search sub-menu you can enter a few (up to 20) characters  
of a photo title. As each character is entered into the search field the  
search results are dynamically updated, narrowing down the list of  
photos until you can see the one you’re looking for.  
All Albums  
Acoustic Guitar  
Best of Pioneer All Stars  
Cooking Or Eating  
Family  
20 Songs  
13 Songs  
10 Songs  
12 Songs  
18 Songs  
11 Songs  
18 Songs  
10 Songs  
13 Songs  
Good!!  
Morning Glory  
Poker Face  
Song forYou  
Tokyo  
Loading...  
Search Results  
5 items  
4
Select the album you want to listen to and press ENTER to  
display the song list.  
R _  
Acoustic Guitar  
1214 items  
Electrified  
9:31  
8:00  
7:31  
3:55  
6:33  
5:26  
4:57  
9:36  
6:18  
6:18  
Home Menu  
Exit  
End Of The Road  
Into The Arena  
Keep On Running  
Never Let You Go  
Open Your Eyes  
Pictures Of My Life  
Real Sound  
Artist: Pioneer All Stars  
Album: Acoustic Guitar  
Genre: Rock  
See Searching movies on page 34 for how to use the screen keypad.  
Format:WMA  
Photo sources  
Rush Street  
Take The Time  
From the photo sources window you can see all the servers found on  
the network and change the selected server. See Movie sources on  
page 34 for more information.  
• When the song length cannot be determined, it is displayed as  
“-:--”.  
Music Navigator  
5
Use the / buttons to change the current selection  
(highlighted in yellow).  
On the left side of the screen you can see file information, such as  
the artist and album name, genre and file format, for the current  
selection.  
From the music section of the Home Media Gallery you can browse  
and play all the compatible song files found on your local area  
network (non-music files are not displayed).  
See also File compatibility on page 9 for more on compatible file  
types.  
6
Press ENTER to play the currently highlighted music.  
The display shows the Now Playing screen.  
• Press to start or resume playback from the last track played  
1
If you haven’t already done so, select ‘Home Media Gallery’  
on the Now Playing screen.  
from the Home Menu, then ‘Music’.  
You should see a list of all the artist names found on the selected  
server.  
Displaying the Song Options menu  
Press to display Song Options menu:  
Artists  
1214 items  
All Artists  
1214 items  
Song Options  
Acoustic Guitar  
Black Pappers  
1
2
4
1
1
1
4
2
5
Album  
Albums  
Albums  
Album  
Album  
Album  
Albums  
Albums  
Albums  
David Jack  
Electrified  
Eric Gilberto  
King  
End Of The Road  
Into The Arena  
Keep On Running  
Never Let You Gohe  
Open Your Eyes  
Pictures Of My Life  
Real Sound  
Play song  
Add to Quicklist  
Michael Beck  
Pioneer All Stars  
Rock'n Roll Brothers  
The Fishes  
Artist: Pioneer All Stars  
Artist:Depeche Mode  
Album: Remixes 81-04  
Album: Acoustic Guitar  
Genre: Alternative  
Genre: Rock  
Format:WMA  
Format:WMA  
Treetop  
Rush Street  
Take The Time  
Play Song: Play the selected song from the beginning.  
Add to Quicklist: Add the selected song to your Quicklist. The  
Quicklist feature is a useful way to organize music files for handy  
selection and playback. The Quicklist can contain up to 25  
1
songs.  
Note  
1 Quicklists are lost in the following instances:  
• When you exit Music Navigator.  
36  
• When you change the server to which you are connected.  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Quicklist: Display a list of all the songs currently in your  
Quicklist. Press to display the Song Options menu, where  
you can start playback or remove songs from the Quicklist:  
Displaying the browse menu  
Press to display the browse menu:  
06  
1214 items  
Acoustic Guitar  
Quicklist  
24 items  
Song Options  
Electrified  
9:31  
8:00  
7:31  
3:55  
6:33  
5:26  
4:57  
9:36  
6:18  
6:18  
Electrified  
End Of The Road  
Into The Arena  
Keep On Running  
Never Let You Go  
Open Your Eyes  
Pictures Of My Life  
Real Sound  
End Of The Road  
Play song  
Remove  
Into The Arena  
Keep On Running  
Never Let You Go  
Open Your Eyes  
Pictures Of My Life  
Real Sound  
Artist: Pioneer All Stars  
Album: Acoustic Guitar  
Genre: Rock  
All Songs  
Browse  
Format: WMA  
Search  
Browse menu  
Sort  
Rush Street  
Now Playing  
Music Sources  
Rush Street  
Take The Time  
Take The Time  
Depending on the browse menu, certain options may not be  
selectable.  
Folders: Display a list of folders and song files. Select a folder  
and press ENTER to see the list of songs and subfolders within  
the folder. (The folder configuration may change depending on  
the server type.)  
All Songs: Display all songs (files/tracks) found on the server.  
Browse: Browse songs by Artists, Albums, Genres, Playlists,  
Quicklist or Folders. See also Browsing songs below.  
Searching songs  
Search: Find a song by entering a name (or a few letters) to  
search for. The search results are narrowed down as you enter  
more letters. See also Searching songs below.  
From the Search sub-menu you can enter a few characters (up to 20)  
of a song title, genre, artist or album. As each character is entered  
into the search field the search results are dynamically updated,  
narrowing down the list of songs until you can see the one you’re  
looking for.  
Sort: Sort songs by date (oldest first or most recent first), or  
alphabetically by song title, artist, album or genre (‘A’ first or ‘Z’  
first).  
Loading···  
Now Playing: Display song information (track name, artist,  
album, genre, etc.) and playback information. See also Now  
playing song information on page 37.  
Search Results  
4 items  
Reason  
1:31  
1:02  
1:31  
1:25  
Real Sound  
Rolling Dice  
Rush Street  
Music Sources: Display servers on the network. See also Music  
R _  
sources on page 37.  
Browsing songs  
The browse sub-menu gives you various ways to browse songs.  
Home Menu  
Exit  
See Searching movies on page 34 for how to use the screen keypad.  
1214 items  
Acoustic Guitar  
Electrified  
9:31  
8:00  
7:31  
3:55  
6:33  
5:26  
4:57  
9:36  
6:18  
6:18  
End Of The Road  
Into The Arena  
Keep On Running  
Never Let You Go  
Open Your Eyes  
Pictures Of My Life  
Real Sound  
Now playing song information  
The Now Playing screen shows detailed information about the  
song playing, including:  
Go back  
Artists  
Browse  
sub-menu  
Albums  
Genres  
Playlists  
Quicklist  
Folders  
• Artist and song title  
• Progress bar (elapsed time and song length)  
• Album name  
Rush Street  
Take The Time  
Go back: Return to the previous menu.  
• Genre  
Artists: Display a list of artists, and how many albums are  
associated with each. Select an artist and press ENTER to see  
the album list by that artist.  
• File format  
• Browse menu  
• Play status  
Albums: Display a list of albums, and how many songs are  
associated with each. Select an album and press ENTER to see  
the list of songs on that album.  
• Play mode  
• Next/Previous song names  
Genres: Display all music genres, and how many songs are in  
each one. Select a genre and press ENTER to see the list of  
artists in that genre.  
Now Playing  
Playlists: Display the server Playlists.  
Pioneer All Stars  
Real Sound  
Acoustic Guitar  
Genre: Rock  
Format: MP3  
3:10 / 5:51  
All Songs  
Browse  
Search  
Sort  
Now Playing  
Music Sources  
Previous Song  
Pictures Of My  
Next Song  
Rush Street  
Music sources  
From the music sources window you can see all the servers found  
on the network and change the selected server. See Movie sources  
on page 34 for more information.  
37  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
First entering Movie, Photo or Music Navigator  
After powering on this player and entering the Movie, Music or  
Photo Navigator, you may be presented with the Folders screen.  
This is due to this player compiling a list of the available media on  
your media servers. This list will vary depending on the media  
sharing software you are using, but you will be able to navigate  
through the list using the / buttons, the ENTER key to select a  
folder, or the ENTER key on the Go back selection found in each  
folder.  
About Windows Media Player 11/Windows  
Media Connect  
06  
Windows Media Player 11/Windows Media Connect is software to  
deliver music, photos and movies from a Microsoft Windows XP  
computer to home stereo systems and TVs. The same function is  
also available in Windows Media Player 11.  
With this software, you can play back files stored on the PC through  
various devices wherever you like in your home.  
If you come to a folder containing content that you wish to play, you  
may press to display the Movie Options, Photo Options, or  
Song Options as illustrated in pages 33, 35 and 36).  
At this time you cannot download the Windows Media Connect  
software from Microsoft’s website. If your server currently does not  
have Windows Media Connect installed, install Windows Media  
Player 11 (for Windows XP) instead. This software can be  
downloaded from Microsoft’s website.  
Pressing to display the browse menu (as illustrated in,  
pages 34, 35 and 37) will may a browse menu with the All Movies,  
All Photos or All Songs options grayed out. If this is the case, this  
means that this player has not finished compiling the list of available  
media, and you may continue to browse through the folders and play  
media while this list completes. When this player has finished  
compiling this list, the All Movies, All Photos or All Songs options  
will no longer be grayed out, and you will be able to select these and  
continue navigating as described in this chapter:  
For more information check the official Microsoft website.  
Authorizing this player  
In order to be able to browse and play files from a server this player  
must be authorized or registered. This happens automatically when  
the player makes a connection over the network to the server. If not,  
please authorize or register this player manually on the server.  
If you are not presented with a folders menu as described above, this  
means that this player has finished compiling a list of available  
media on your media servers, and you can navigate through the  
Movie, Photo or Music Navigator screens as described in this  
manual.  
For more information on authorizing this player, refer to the  
instruction manual of your server.  
FAQ  
Changing content on your Media Server  
• Some files don’t show up. Where are they?  
If you change the available content on your media server (by adding  
or removing shared files) while you are in the Movie, Photo or Music  
Navigators, the Movie, Photo or Music Navigator screen you are on  
will change to the Folders menu. From here, you can browse the  
folders and play content as described in the first section. Once this  
player has finished compiling a new list of available media, the All  
Movies, All Photos or All Songs options of the browse menu will  
become highlighted an accessible.  
– File names that don’t end with one of the permitted extensions  
won’t be recognized by this player. See also File compatibility on  
page 9.  
– Supported file formats vary by server. As such, files not  
supported by your server are not displayed on this unit.  
For more information check with the manufacturer of your  
server.  
38  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 7  
07  
Video/Audio Adjust menu  
From the Video/Audio Adjust menu you can make various settings  
that affect how video is presented on your TV and how the sounds.  
Items in the Video/Audio Adjust menu can only be changed  
during playback.  
Creating your own presets  
You can create up to three presets of your own.  
1
2
Select one of the Memory presets.  
Press to select ‘Detailed Settings’ then press ENTER.  
Video Adjust  
Memory 1  
• Default setting: Standard  
Detailed Settings  
From the Video Adjust screen you can select the Standard or  
Cinema video presentation or define presets of your own in  
Memory 1 to Memory 3.  
3
Adjust the picture quality settings.  
• Use the / buttons to select a setting.  
1
Press HOME MENU and select ‘Video/Audio Adjust’ from  
• Use the / buttons to adjust the current setting.  
the on-screen display.  
You can press VIDEO ADJUST on the remote to display the Video  
Adjust screen.  
Memory 1  
White Level  
Black Level  
Hue  
Min  
Min  
Max  
Max  
Red  
Max  
Home Menu  
Green  
Min  
Disc Navigator  
Home Media Gallery  
Video/Audio Adjust  
Initial Setup  
Chroma Level  
Select a setting then press ENTER to display just that setting. This  
gives you more screen area in which to see the effects of changes  
you make.  
Memory 1  
2
3
Select ‘Video Adjust’.  
Min  
Max  
White Level  
Use the / buttons to select a preset.  
• Press ENTER or RETURN to go back to full-screen display.  
Standard  
Detailed Settings  
You can adjust any or all of the following picture quality settings:  
White Level1 – Adjusts the intensity of white.  
Black Level1 – Adjusts the intensity of black.  
Hue1 – Adjusts the overall color balance between red and green.  
Chroma Level1 – Adjusts how saturated colors appear.  
Standard – Standard setting  
1
Cinema – Optimized for watching movies  
Memory 1/Memory 2/Memory 3 – Use for saving your own  
presets (see Creating your own presets below)  
4
Press ENTER or RETURN to make the setting and exit the  
4
Press RETURN to save the preset and exit the Detailed  
Video Adjust screen.  
Settings screen.  
PureCinema  
There are two types of video signals: Video interlace material, with a  
frame rate of 30 frames/second; and film progressive material, that has  
a frame rate of 24 frames/second.  
In PureCinema mode film progressive material is converted to 60  
frames/second progressive, which matches more closely the picture  
quality of a cinema screen. (24 frames/second source is converted to 60  
frames/second.)  
When you have Video Adjust set to Standard, Cinema, or Memory 1,  
Memory 2 or Memory 3 and play a BD-ROM or DVD disc video that can  
be identified as film progressive or video interlace material, PureCinema  
mode is automatically activated.  
If you notice problems with the images projected when set to Cinema  
(images appear to motion-blurred, or jagged), set the Video Adjust to  
Standard or Memory 1, Memory 2 or Memory 3.  
39  
En  
Note  
1 Effective only for video output from HDMI OUT or COMPONENT VIDEO OUT connections (settings do no affect video output from VIDEO OUT or S-VIDEO OUT).  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Audio Adjust  
07  
From the Audio Adjust menu you can set the Audio DRC (Dynamic  
Range control).  
Audio DRC  
• Default setting: Off  
When watching Dolby Digital BD and DVD discs, as well as PC files  
with Dolby Digital audio, at low volume, it’s easy to lose the quieter  
sounds completely — including some of the dialog. Switching  
Audio DRC to On can help by bringing up the quieter sounds, while  
controlling loud peaks.  
How much of a difference you hear depends on the material you’re  
listening to. If the material doesn’t have wide variations in volume,  
you may not notice much change.  
Important  
• Audio DRC is effective with the following types of audio:  
– Analog audio from the AUDIO OUT (2ch) and  
AUDIO OUT (5.1ch) jacks.  
– PCM audio from the DIGITAL AUDIO OUT (COAXIAL/  
OPTICAL) and HDMI OUT jacks (see also About the audio  
output settings on page 44).  
1
Press HOME MENU and select ‘Video/Audio Adjust’ from  
the on-screen display.  
Home Menu  
Disc Navigator  
Home Media Gallery  
Video/Audio Adjust  
Initial Setup  
2
Select ‘Audio Adjust’.  
Video/Audio Adjust  
Video Adjust  
Audio Adjust  
3
Highlight Audio DRC, then use the / buttons to change  
to ‘Off’, ‘Level 1’, ‘Level 2’ or ‘Max’ as required.  
Audio Adjust  
Audio DRC  
Max  
Off  
4
Press ENTER or RETURN to make the setting and exit the  
Audio Adjust screen.  
40  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CIhnapitteira8 l Setup menu  
08  
Using the Initial Setup menu  
The Initial Setup menu is where you can set various player options for sound, picture, language and so on. Note that settings can only be  
changed when the player is stopped.  
If you disconnect the player from the wall outlet before switching the player off, any new settings made during that session will be lost.  
Press HOME MENU and select ‘Initial Setup’.  
In the table below, the default option is marked with a •  
Setting  
Options  
Explanation  
Video Out  
TV Aspect Ratio  
4:3 (Standard)  
Select if you have a standard 4:3 TV. See Changing the output video resolution.  
When the output video resolution is set to 720p, 1080i or 1080p, video is output in 16:9  
widescreen format even if TV Aspect Ratio is set to 4:3 (Standard). When connected to a 4:3  
TV, set the output video resolution to 480i or 480p. See also Changing the output video  
resolution on page 14.  
16:9 (Widescreen) •  
Full  
Select if you have a widescreen 16:9 TV.  
4:3 Video Out  
4:3 video material is output without black bars on either side of the picture if the  
TV Aspect Ratio (above) is set to 16:9 (Widescreen).  
Normal •  
4:3 video material is output with black bars on either side of the picture if the TV Aspect Ratio  
setting (above) is set to 16:9 (Widescreen).  
DVD 16:9 Video Out  
Letter Box •  
Pan & Scan  
If the TV Aspect Ratio setting (above) is set to 4:3 (Standard), select this if you prefer  
letterbox presentation of 16:9 format DVDs.  
If the TV Aspect Ratio setting (above) is set to 4:3 (Standard), select this if you prefer  
Pan & Scan presentation of 16:9 format DVDs.  
Some discs contain only Letter Box or Pan & Scan presentation so the video output will depend on the disc.  
HDMI Color Space  
YCbCr •  
This is the standard setting for HDMI-compatible devices.  
RGB (16-235)  
RGB (0-255)  
Use this setting if colors appear overly rich and the black too deep on the RGB (0-255) setting.  
Use if colors are weak and black appears to ‘float’ on the RGB (16-235) setting.  
When using an HDMI monitor that accepts only RGB input, this player outputs RGB video even if this setting is set to YCbCr. If the monitor is DVI-compatible, the player  
outputs RGB (0-255) color space. If however the picture looks unnatural, set it to RGB (16-235).  
24p Direct Out  
On  
Gives smooth movement in BD film material video. This setting is only effective when the  
player is connected to a 1080/24p-compatible TV using HDMI.  
Off •  
Choose this setting if you notice picture disturbance when the video switches between video  
and film material.  
When 24p Direct Out is On, you may experience some picture disturbance when the video switches between video and film material. See also Changing the output video  
resolution on page 14.  
41  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setting  
Options  
Explanation  
08  
Audio Out  
Dolby Digital Out  
Dolby Digital •  
Outputs a Dolby Digital signal when a Dolby Digital source is being played.  
Dolby Digital PCM Converts Dolby Digital sources to Linear PCM output. Use if your connected equipment  
doesn’t support Dolby Digital audio.  
This setting is effective in digital audio outputs.  
DTS Out  
DTS •  
Outputs a DTS signal when a DTS source is being played.  
DTS PCM  
Converts sources with DTS audio to Linear PCM output. Use if your connected equipment  
doesn’t support DTS audio.  
This setting is effective in digital audio outputs.  
DTS Downmix  
Stereo •  
If you’ve selected DTS PCM in DTS Out above, you can choose the way the DTS signal is  
downmixed PCM audio. Stereo downmixes the signal to 2-channel stereo.  
Lt/Rt  
Downmixes to a 2-channel signal compatible with Dolby surround matrix decoders. (This  
allows you to hear surround sound if your AV receiver or amplifier has Dolby Pro Logic  
capability.)  
HDMI Audio Out  
Auto •  
PCM  
Outputs a bitstream of Dolby TrueHD, Dolby Digital Plus, Dolby Digital, DTS-HD High  
Resolution Audio or DTS. However, if the player is connected to an HDMI device that is  
incompatible with the output of Dolby TrueHD, Dolby Digital Plus or DTS-HD High Resolution  
Audio, it outputs the Dolby Digital or DTS bitstream. Depending on the HDMI device  
connected and the content being played, Linear PCM audio may be output. See About the  
audio output settings on page 44 for details.  
All audio signals are converted to Linear PCM. This player can output up to 7.1 ch Linear PCM  
if the connected HDMI devices are capable of the output of Dolby TrueHD, Dolby Digital Plus  
or DTS-HD High Resolution Audio. See About the audio output settings on page 44 for details.  
Language  
OSD Language  
English •  
Sets the language of the on-screen displays to English.  
available languages  
English •  
Choose from the languages displayed for the on-screen displays.  
Sets both the BD-ROM and DVD-Video default audio language to English.  
Audio Language  
available languages  
Choose from the languages displayed to set the default audio language for BD-ROM and  
DVD-Video playback.  
Other  
Continue to the next screen to set the default audio language for BD-ROM and DVD-Video  
disc playback. You can select the language name or enter the code number (see on page 49  
for the code list).  
Discs do not necessarily have audio in your selected language. Also, some discs override the Audio Language preference.  
Subtitle Language  
English •  
Sets the default subtitle language for BD-ROM and DVD-Video playback to English.  
available languages  
Choose from the languages displayed to set the default subtitle language for BD-ROM and  
DVD-Video playback.  
Other  
Continue to the next screen to set the default subtitle language for BD-ROM and DVD-Video  
disc playback. You can select the language name or enter the code number (see on page 49  
for the code list).  
Discs do not necessarily have subtitles in your selected language. Also, some discs override the Subtitle Language preference.  
BD/DVD Menu  
Language  
w/Subtitle  
Sets the language of BD-ROM and DVD-Video menus to the same as that set for the subtitle  
language.  
Language  
available languages  
Choose from the displayed languages to set the default language for BD-ROM and DVD-Video  
menus.  
Other  
Continue to the next screen to set the default menu language for BD-ROM and DVD-Video  
disc menus. You can select the language name or enter the code number (see on page 49 for  
the code list).  
Discs do not necessarily have menus in your selected menu language.  
Subtitle Display  
On •  
Off  
Select to have BD-ROM and DVD-Video discs display subtitles.  
Select to switch off subtitle display.  
Some discs may override these settings.  
42  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setting  
Options  
Explanation  
08  
Parental Lock  
Change Password  
(Set Password)  
Next Screen  
Set or change the password necessary to play BD or DVD discs that have level/age  
restrictions. In order to change the password, you’ll need to first enter your existing one.  
DVD Parental Lock  
Change Level  
Enter your password and then set the parental lock level. Discs with a lock level higher than  
that set in the player will require the password to play.  
DVD Country Code  
Enter your password and then set a country/area code. This ensures that you see the scenes  
intended for your country or area. See BD/DVD country/area code list on page 49.  
BD Parental Lock  
Change Age  
Restriction  
Enter your password and then set the age restriction. “255” indicates no parental control.  
BD Country Code  
Enter your password and then set a country/area code. This ensures that you see the scenes  
intended for your country or area. See BD/DVD country/area code list on page 49.  
Only certain discs have parental lock features. Check the disc packaging to see what features the disc has. If you forget your password you can reset it by resetting the player  
to its factory settings. See BD/DVD language code list on page 49.  
Network  
IP Configuration  
Next Screen  
Next Screen  
Next Screen  
Continue to the next screen to input IP address details. See Setting up for network use on  
page 21 for more detailed information.  
Device Name  
Continue to the next screen to set the name of this player as it will appear to other devices on  
the network. See Setting up for network use on page 21 for more detailed information.  
Display Network  
Config.  
Continue to the next screen to see a summary of your network settings.  
Speakers  
Audio Output Mode  
2 Channel •  
5.1 Channel  
Set if you connected this player to an amplifier using only the front left/right channels of the  
AUDIO OUT (5.1ch) outputs.  
Set if you connected this player to an amplifier using all 5.1 channels of the  
AUDIO OUT (5.1ch) outputs. On this setting the audio output from the AUDIO OUT (2ch)  
jacks will be incorrect.  
Speaker Setup  
Next Screen  
Continue to the next screen to specify which speakers are connected to your system.  
This setting affects how audio is output from the multi-channel analog outputs. See Speaker  
Setup on page 45 for more detailed information.  
Options  
On Screen Display  
On •  
Off  
The player displays operation displays (“Stop”, “Play”, etc.) on-screen.  
Switches off the on-screen operation displays.  
Auto Power Off  
On •  
If the player is stopped or paused for more than 30 minutes with no operation by the user, the  
player automatically switches itself off.  
Off  
No automatic power off.  
Setup Navigator  
HDMI Control  
Start  
On •  
Off  
Select to start the Setup Navigator. See also Switching on and setting up on page 20.  
Select when using the HDMI Control function. See HDMI Control on page 7.  
Select when not using the HDMI Control function. See HDMI Control on page 7.  
Playback the BD portion.  
Set hybrid disc  
playback layer  
BD •  
DVD  
CD  
Playback the DVD portion. When no DVD portion is present, the BD portion is played back.  
Playback the CD portion. When no CD portion is present, the BD portion is played back.  
This setting cannot be changed when a disc is inserted in the disc tray.  
Software Update  
Start  
The Software Update function can check for and download updated system software from the  
network server. See Software updating on page 45.  
43  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
About the audio output settings  
08  
The table below shows how the audio settings you make in the Initial Setup menu (page 41) affect the output to the analog (2ch/5.1ch), digital  
and HDMI outputs with various types of disc/files.  
HDMI output1  
PCM6  
Analog outputs  
2ch2  
Digital outputs  
PCM convert3  
Disc audio format  
Dolby Digital  
Bitstream4,5  
5.1ch2  
Auto5,6,7  
2ch downmix  
PCM  
5.1ch PCM  
2ch downmix  
PCM  
Dolby Digital  
5.1ch PCM  
Dolby Digital  
Dolby Digital  
Plus8  
2ch downmix  
PCM  
5.1ch PCM  
2ch downmix  
PCM  
Dolby Digital  
7.1ch PCM9  
Dolby Digital  
Plus  
Dolby TrueHD8  
2ch downmix  
PCM  
5.1ch PCM  
5.1ch PCM  
2ch downmix  
PCM  
Dolby Digital  
DTS  
7.1ch  
Dolby TrueHD14  
PCM9,10,11,12,13  
DTS  
2ch downmix  
PCM  
2ch downmix  
PCM  
5.1ch  
PCM10,15,16  
DTS  
BD-ROM  
DTS-HD High  
Resolution  
2ch downmix  
PCM  
5.1ch PCM  
5.1ch PCM  
2ch downmix  
PCM  
DTS  
DTS  
7.1ch  
DTS-HD High  
Resolution Audio  
PCM9,10,12,15  
Audio17  
DTS-HD Master 2ch downmix  
Audio18  
2ch downmix  
PCM  
5.1ch  
PCM10,15,16  
DTS  
PCM  
Linear PCM  
2ch downmix  
PCM  
5.1ch downmix 2ch downmix  
2ch downmix  
PCM  
7.1ch  
7.1ch PCM  
PCM10,11,15  
PCM11  
PCM  
Dolby Digital  
DTS  
2ch downmix  
PCM  
5.1ch PCM  
2ch downmix  
PCM  
Dolby Digital  
5.1ch PCM  
Dolby Digital  
DTS  
2ch downmix  
PCM  
5.1ch PCM  
2ch downmix  
PCM  
DTS  
5.1ch PCM  
DVD-Video  
MPEG  
2ch PCM  
2ch PCM  
2ch PCM  
2ch PCM  
2ch PCM  
2ch PCM  
2ch PCM  
2ch PCM  
2ch PCM  
2ch PCM  
2ch PCM  
2ch PCM  
Linear PCM  
1. If the connected HDMI device is compatible with fewer channels of Linear PCM audio than this player, the output will be adjusted to be compatible with the HDMI device.  
2. When Audio Output Mode is set to 2 Channel or 5.1 Channel (see Audio Output Mode on page 43).  
3. Dolby Digital PCM or DTS PCM setting (see Dolby Digital Out and DTS Out on page 42).  
4. Dolby Digital or DTS setting (see Dolby Digital Out and DTS Out on page 42).  
5. Even if there is interactive audio, interactive audio is not mixed.  
6. When HDMI Audio Out is set to PCM or Auto (see HDMI Audio Out on page 42).  
7. If the connected HDMI device is not compatible with Dolby Digital Plus, Dolby TrueHD or DTS-HD High Resolution Audio, the signal will be output as Dolby Digital or DTS.  
If the HDMI device is not compatible with Dolby Digital or DTS, the signal is output as Linear PCM. If Dolby TrueHD, Dolby Digital Plus or DTS-HD High Resolution Audio is  
converted and output as Linear PCM, the output signal is Linear PCM of each source signal.  
8. AUDIO OUT (2ch), AUDIO OUT (5.1ch) and DIGITAL AUDIO OUT (COAXIAL/OPTICAL) output Dolby Digital.  
9. Audio is output in 7.1ch/6.1ch with Surround Back output sources only. With other sources, audio is output in 5.1ch. The 6.1 Surround Back audio is output in 7.1ch.  
10.Interactive audio is not mixed when the sampling rate is 192 kHz or 96 kHz.  
11.Outputs 2ch downmix PCM when the sampling rate is 192 kHz.  
12.Outputs max. 5.1ch audio when the disc contains 96 kHz audio and the resolution is set to 720p, 1080i or 1080p.  
13.Outputs 2ch audio when the disc contains 96 kHz audio and the resolution is set to 480i or 480p.  
14.Outputs a Dolby Digital bitstream when the resolution is set to 480i or 480p.  
15.Outputs 48 kHz audio when the disc contains 96 kHz audio and the resolution is set to 480i or 480p.  
16.Outputs 7.1ch audio when the source is the DTS-ES 6.1 Discrete audio.  
17.AUDIO OUT (2ch), AUDIO OUT (5.1ch) and DIGITAL AUDIO OUT (COAXIAL/OPTICAL) output DTS.  
18.DTS sound is output.  
Note  
• Output sampling rate is 48 kHz through the digital audio outputs.  
• MPEG audio is always output as linear PCM.  
44  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Speaker Setup  
08  
Note  
• Steps 1 to 3 are the operations performed by the user (they are  
intended to download the software from the Internet).  
You only need to make this setting if you connected this player to your  
amplifier using the 5.1 channel analog outputs.  
• Steps 4 to 6 are the operations performed (automatically) by the  
player (they are intended to update the software).  
This setting does not affect any digital audio output.  
Use the Speaker Setup screen to tell the player what kinds of  
1
2
3
Press HOME MENU and select ‘Initial Setup’.  
Select ‘Options’, then ‘Software Update’.  
Select ‘Start’, then ‘Yes’.  
speakers you have connected.  
1
2
3
4
Press HOME MENU and select ‘Initial Setup’.  
Select ‘Speakers’.  
Select ‘Speaker Setup’, then ‘Next Screen’.  
Use the / buttons to select a speaker.  
Initial Setup  
Video Out  
Audio Out  
Language  
Parental Lock  
Network  
Software Update  
Yes  
No  
Initial Setup  
Spekaers  
Options  
Video Out  
Audio Out  
Language  
Parental Lock  
Network  
Speaker Setup  
C
Yes  
Do not unplug the power cord during downloading.  
The disc tray will open. Do not touch it. Wait awhile.  
Start downloading?  
Ls/Rs  
L/R  
Yes  
Large  
Spekaers  
Options  
• The player turns off automatically.  
5
Use the / buttons to change the speaker setup.  
• If the player is already running the latest software, a help  
message will be displayed.  
Specify which speakers you have in your setup:  
C (Center): Yes or No  
• Depending on the Internet connection conditions, software  
updating may take a certain period of time (certain time is also  
required for downloading of software). Other operations are  
defeated during software updating.  
Ls/Rs (Surround): Yes or No  
L/R (Main): Small or Large (This setting is only applicable if the  
C and Ls/Rs speakers are present.)  
4
Downloading and updating of the software start.  
6
Press ENTER to save the settings and exit the Speaker Setup  
The front panel display shows the following messages, and the  
player produces an operating sound (it does not output audio or  
video).  
screen.  
Software updating  
“POWER OFF”  
The software of the player can be updated by connecting it to the  
Internet using a LAN cable.  
“POWER ON”  
“NET”  
Important  
“NET-DWLD”  
• Depending on the Internet connection conditions, software  
updating may take a certain period of time (certain time is also  
required for downloading of software). Other operations are  
defeated during software updating.  
“DOWNLOAD”  
5
6
Updating starts.  
• As the disc tray opens automatically when software updating  
starts, it is recommended to open the rack door if the player is  
installed in a rack with front doors. When the disc tray is open,  
never attempt to push close it by force (leave the disc tray open).  
• The front panel display shows messages such as  
“DATA CHECK”, “WRT FLASH1”, “WRT DRIVE” and “WRT  
SUBCON”.  
• Do not unplug the power cord during software updating.  
• Do not unplug the power cord during software updating.  
Otherwise, the updating will be aborted and malfunction may  
occur with the player.  
The disc tray opens automatically when updating  
completes.  
• The front panel display shows “DL OK” and the player turns off  
automatically.  
• When the disc tray is open, never attempt to push close it by  
force (leave the disc tray open).  
7
Verify that the software is updated properly.  
• Step 7 is the operation performed by the user.  
• Turn the player on. If the front panel display shows “DL OK”, the  
software has been updated successfully.  
45  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 9  
09  
Additional information  
Taking care of your player and discs  
Damaged and odd-shaped discs  
Discs spin at high speed inside the player. If you can see that a disc  
is cracked, chipped, warped, or otherwise damaged, don’t risk using  
it in your player — you could end up damaging it.  
Handling discs  
When holding discs of any type, take care not to leave fingerprints,  
dirt or scratches on the disc surface. Hold the disc by its edge or by  
the center hole and edge.  
Damaged or dirty discs can affect playback performance. Take care  
also not to scratch the label side of the disc. Although not as fragile  
as the recorded side, scratches can still result in a disc becoming  
unusable.  
Should a disc become marked with fingerprints, dust, etc., clean  
using a soft, dry cloth, wiping the disc lightly from the center to the  
outside edge as shown in the diagram below.  
This player is designed for use with conventional, fully circular discs  
only. Use of shaped discs is not recommended for this product.  
Pioneer disclaims all liability arising in connection with the use of  
shaped discs.  
Do not use any kind of adapter when playing 8 cm DVD discs. This  
size disc can be played in this player without an adapter; just use the  
smaller disc guide in the disc tray.  
Cleaning the pickup lens  
Wipe lightly from the center of the disc using straight strokes.  
Don’t wipe the disc surface using circular strokes.  
The player’s lens should not become dirty in normal use, but if for  
some reason it should malfunction due to dust or dirt, consult your  
nearest Pioneer-authorized service center. Although lens cleaners  
for DVD players are commercially available, we advise against using  
them since some may damage the lens.  
Problems with condensation  
If necessary, use a cloth soaked in alcohol, or a commercially  
available DVD/BD cleaning kit to clean a disc more thoroughly.  
Never use benzine, thinner or other cleaning agents, including  
products designed for cleaning vinyl records.  
Condensation may form inside the player if it is brought into a warm  
room from outside, or if the temperature of the room rises quickly.  
Although the condensation won’t damage the player, it may  
temporarily impair its performance. For this reason you should leave  
it to adjust to the warmer temperature for about an hour before  
switching on and using.  
Storing discs  
Although BD and DVD discs are more durable than vinyl records,  
you should still take care to handle and store discs correctly. When  
you’re not using a disc, return it to its case and store upright. Avoid  
leaving discs in excessively cold, humid, or hot environments  
(including under direct sunlight).  
Don’t glue paper or put stickers onto the disc, or use a pencil,  
ball-point pen or other sharp-tipped writing instrument. These could  
all damage the disc.  
For more detailed care information see the instructions that come  
with discs.  
Do not load more than one disc into the player at a time.  
46  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Hints on installation  
Screen sizes and disc formats  
09  
We want you to enjoy using this product for years to come, so please  
bear in mind the following points when choosing a suitable location  
for it:  
BD-ROM and DVD-Video discs come in several different screen  
aspect ratios, ranging from TV programs, which are generally 4:3, to  
CinemaScope widescreen movies, with an aspect ratio of up to  
about 7:3.  
Do...  
• Use in a well-ventilated room.  
Televisions, too, come in different aspect ratios; ‘standard’ 4:3 and  
‘widescreen’ 16:9.  
• Place on a solid, flat, level surface, such as a table, shelf or  
stereo rack.  
Widescreen TV users  
If you have a widescreen TV, the TV Aspect Ratio setting (page 41)  
of this player should be set to 16:9 (Widescreen).  
Don’t...  
• Use in a place exposed to high temperatures or humidity,  
including near radiators and other heat-generating appliances.  
When you watch discs recorded in 4:3 format, you can use the TV  
controls to select how the picture is presented. Your TV may offer  
various zoom and stretch options; see the instructions that came  
with your TV for details.  
• Place on a window sill or other place where the player will be  
exposed to direct sunlight.  
• Use in an excessively dusty or damp environment.  
• Place directly on top of an amplifier, or other component in your  
stereo system that becomes hot in use.  
Please note that some movie aspect ratios are wider than 16:9, so  
even though you have a widescreen TV, these discs will still play in  
a ‘letter box’ style with black bars at the top and bottom of the  
screen.  
• Place the player on top of or immediately next to the television or  
monitor as you may experience interference.  
• Use in a kitchen or other room where the player may be exposed  
to smoke or steam.  
Standard TV users  
If you have a standard TV, the TV Aspect Ratio setting (page 41) of  
this player should be set to 4:3 (Standard).  
• Use on a thick rug or carpet, or cover with cloth — this may  
prevent proper cooling of the unit.  
• Place on an unstable surface, or one that is not large enough to  
support all four of the unit’s feet.  
Resetting the player  
Use this procedure to reset all the player’s settings to the factory  
default.  
Moving the player  
If you need to move this unit, first remove the disc, if there’s one  
loaded, and close the disc tray. Next, press STANDBY/ON to  
switch the power to standby, checking that the power off indication  
in the display goes off. Wait at least 10 seconds. Lastly, disconnect  
the power cord.  
1
2
3
Make sure that the player is turned on.  
Press to stop playback when a disc is being played back.  
Press and hold and press STANDBY/ON.  
• Use the control buttons on the front panel.  
Never lift or move the unit during playback — discs rotate at a high  
speed and may be damaged.  
• The player turns off with all settings reset.  
Caution for when the unit is installed in a rack with a  
glass door  
Do not press the OPEN/CLOSE button on the remote control to  
open the disc table while the glass door is closed. The door will  
hamper movement of the disc table, and the disc table could be  
damaged.  
47  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setting up the remote to control your TV  
09  
1
Input the manufacturer code.  
2
Confirm that the TV is responding to the programed code.  
While holding down the TV CONTROL button, input the two digit  
code from the table below that corresponds to the make of your TV.  
On the remote, press the TV CONTROL button. If the TV switches  
on (or into standby if it was on previously), then you have the correct  
code.  
For example, if you have a Pioneer TV, press and hold TV CONTROL ,  
then press 0, 0 on the remote control.  
If nothing happens when you press the TV CONTROL button,  
start again from step 1 using a different code. Some manufacturers  
have several codes. Try each one until you find the one that works.  
TV Preset code list  
Please note that there are cases where only certain functions may be controllable after assigning the proper preset code, or the codes for  
the manufacturer in the list will not work for the model that you are using.  
Manufacturer Code(s)  
ACURA 44  
ADMIRAL 31  
AIWA 60  
AKAI 32, 35, 42  
AKURA 41  
ALBA 07, 39, 41, 44  
AMSTRAD 42, 44, 47  
ANITECH 44  
FRONTECH 31, 42, 46  
FRONTECH/PROTECH 32  
FUJITSU 48  
FUNAI 40, 46, 58  
GBC 32, 42  
GE 00, 01, 08, 07, 10, 11, 17, 02, 28, 18  
GEC 07, 34, 48  
GELOSO 32, 44  
MAGNAVOX 07, 10, 03, 12, 29  
MANESTH 39, 46  
MARANTZ 07  
SALORA 31, 32, 42, 43  
SAMBERS 49  
SAMSUNG 07, 38, 44, 46, 69, 70  
SANYO 35, 45, 48, 21, 14, 91  
SBR 07, 34  
SCHAUB LORENZ 42  
SCHNEIDER 07, 41, 47  
SEG 42, 46  
MARK 07  
MATSUI 07, 39, 40, 42, 44, 47, 48  
MCMICHAEL 34  
MEDIATOR 07  
MEMOREX 44  
ASA 45  
GENERAL 29  
METZ 31  
SEI 32, 40, 49  
ASUKA 41  
GENEXXA 31, 41  
GOLDSTAR 10, 23, 21, 02, 07, 50  
GOODMANS 07, 39, 47, 48, 56  
GORENJE 38  
GPM 41  
GRAETZ 31, 42  
MINERVA 31, 53  
MITSUBISHI 09, 10, 02, 21, 31  
MULTITECH 44, 49  
NEC 59  
NECKERMANN 31, 07  
NEI 07, 42  
SELECO 31, 42  
SHARP 02, 19, 27, 67, 90  
SIAREM 32, 49  
SIEMENS 31  
SINUDYNE 32, 39, 40, 49  
SKANTIC 43  
AUDIOGONIC 07, 36  
BASIC LINE 41, 44  
BAUR 31, 07, 42  
BEKO 38  
BEON 07  
BLAUPUNKT 31  
BLUE SKY 41  
BLUE STAR 18  
BPL 18  
BRANDT 36  
BTC 41  
BUSH 07, 41, 42, 44, 47, 56  
CASCADE 44  
CATHAY 07  
GRANADA 07, 35, 42, 43, 48  
GRADIENTE 30, 57  
GRANDIN 18  
GRUNDIG 31, 53  
HANSEATIC 07, 42  
HCM 18, 44  
HINARI 07, 41, 44  
HISAWA 18  
HITACHI 31, 33, 34, 36, 42, 43, 54, 06, 10, OSUME 48  
NIKKAI 05, 07, 41, 46, 48  
NOBLIKO 49  
SOLAVOX 31  
SONOKO 07, 44  
SONOLOR 31, 35  
SONTEC 07  
NOKIA 32, 42, 52  
NORDMENDE 32, 36, 51, 52  
OCEANIC 31, 32, 42  
ORION 32, 07, 39, 40  
OSAKI 41, 46, 48  
OSO 41  
SONY 04  
SOUNDWAVE 07  
STANDARD 41, 44  
STERN 31  
SUSUMU 41  
CENTURION 07  
CGB 42  
CIMLINE 44  
CLARIVOX 07  
CLATRONIC 38  
CONDOR 38  
24, 25, 18  
HUANYU 56  
HYPSON 07, 18, 46  
ICE 46, 47  
IMPERIAL 38, 42  
INDIANA 07  
OTTO VERSAND 31, 32, 07, 42  
PALLADIUM 38  
PANAMA 46  
PANASONIC 31, 07, 08, 42, 22  
PATHO CINEMA 42  
PAUSA 44  
SYSLINE 07  
TANDY 31, 41, 48  
TASHIKO 34  
TATUNG 07, 48  
TEC 42  
TELEAVIA 36  
CONTEC 44  
CROSLEY 32  
INGELEN 31  
PHILCO 32, 42  
PHILIPS 31, 07, 34, 56, 68  
PHOENIX 32  
PHONOLA 07  
PROFEX 42, 44  
PROTECH 07, 42, 44, 46, 49  
QUELLE 31, 32, 07, 42, 45, 53  
R-LINE 07  
TELEFUNKEN 36, 37, 52  
TELETECH 44  
TENSAI 40, 41  
THOMSON 36, 51, 52, 63  
THORN 31, 07, 42, 45, 48  
TOMASHI 18  
TOSHIBA 05, 02, 26, 21, 53  
TOWADA 42  
INTERFUNK 31, 32, 07, 42  
INTERVISION 46, 49  
ISUKAI 41  
ITC 42  
ITT 31, 32, 42  
CROWN 38, 44  
CRYSTAL 42  
CYBERTRON 41  
DAEWOO 07, 44, 56  
DAINICHI 41  
DANSAI 07  
JEC 05  
JVC 13, 23  
DAYTON 44  
DECCA 07, 48  
DIXI 07, 44  
DUMONT 53  
ELIN 07  
ELITE 41  
KAISUI 18, 41, 44  
KAPSCH 31  
KENDO 42  
KENNEDY 32, 42  
KORPEL 07  
KOYODA 44  
RADIOLA 07  
RADIOSHACK 10, 23, 21, 02  
RBM 53  
RCA 01, 10, 15, 16, 17, 18, 61, 62, 09  
REDIFFUSION 32, 42  
REX 31, 46  
ULTRAVOX 32, 42, 49  
UNIDEN 92  
UNIVERSUM 31, 07, 38, 42, 45, 46, 54  
VESTEL 07  
VICTOR 13  
VOXSON 31  
ELTA 44  
EMERSON 42  
ERRES 07  
FERGUSON 07, 36, 51  
FINLANDIA 35, 43, 54  
FINLUX 32, 07, 45, 48, 53, 54  
FIRSTLINE 40, 44  
FISHER 32, 35, 38, 45  
FORMENTI 32, 07, 42  
LEYCO 07, 40, 46, 48  
LIESENK&TTER 07  
LOEWE 07  
LUXOR 32, 42, 43  
M-ELECTRONIC 31, 44, 45, 54, 56, 07, 36,  
51  
ROADSTAR 41, 44, 46  
SABA 31, 36, 42, 51  
SAISHO 39, 44, 46  
WALTHAM 43  
WATSON 07  
WATT RADIO 32, 42, 49  
WHITE WESTINGHOUSE 07  
YOKO 07, 42, 46  
ZENITH 03, 20  
MAGNADYNE 32, 49  
MAGNAFON 49  
PIONEER 00, 31, 32, 07, 36, 42, 51  
48  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
BD/DVD language code list  
09  
Language (Language code letter), Language code  
Japanese (ja), 1001  
English (en), 0514  
French (fr), 0618  
German (de), 0405  
Italian (it), 0920  
Spanish (es), 0519  
Dutch (nl), 1412  
Russian (ru), 1821  
Chinese (zh), 2608  
Korean (ko), 1115  
Greek (el), 0512  
Catalan (ca), 0301  
Corsican (co), 0315  
Czech (cs), 0319  
Welsh (cy), 0325  
Danish (da), 0401  
Bhutani (dz), 0426  
Esperanto (eo), 0515  
Estonian (et), 0520  
Basque (eu), 0521  
Persian (fa), 0601  
Finnish (fi), 0609  
Fiji (fj), 0610  
Faroese (fo), 0615  
Frisian (fy), 0625  
Irish (ga), 0701  
Scots-Gaelic (gd), 0704  
Galician (gl), 0712  
Guarani (gn), 0714  
Gujarati (gu), 0721  
Hausa (ha), 0801  
Hindi (hi), 0809  
Indonesian (in), 0914  
Icelandic (is), 0919  
Hebrew (iw), 0923  
Yiddish (ji), 1009  
Javanese (jw), 1023  
Georgian (ka), 1101  
Kazakh (kk), 1111  
Greenlandic (kl), 1112  
Cambodian (km), 1113  
Kannada (kn), 1114  
Kashmiri (ks), 1119  
Kurdish (ku), 1121  
Kirghiz (ky), 1125  
Burmese (my), 1325  
Nauru (na), 1401  
Nepali (ne), 1405  
Norwegian (no), 1415  
Occitan (oc), 1503  
Oromo (om), 1513  
Oriya (or), 1518  
Panjabi (pa), 1601  
Polish (pl), 1612  
Pashto, Pushto (ps), 1619  
Portuguese (pt), 1620  
Quechua (qu), 1721  
Rhaeto-Romance (rm), 1813  
Kirundi (rn), 1814  
Romanian (ro), 1815  
Kinyarwanda (rw), 1823  
Sanskrit (sa), 1901  
Sindhi (sd), 1904  
Sangho (sg), 1907  
Serbo-Croatian (sh), 1908  
Sinhalese (si), 1909  
Slovak (sk), 1911  
Slovenian (sl), 1912  
Samoan (sm), 1913  
Shona (sn), 1914  
Serbian (sr), 1918  
Siswati (ss), 1919  
Sesotho (st), 1920  
Sundanese (su), 1921  
Swedish (sv), 1922  
Swahili (sw), 1923  
Tamil (ta), 2001  
Telugu (te), 2005  
Tajik (tg), 2007  
Thai (th), 2008  
Tigrinya (ti), 2009  
Turkmen (tk), 2011  
Tagalog (tl), 2012  
Setswana (tn), 2014  
Tonga (to), 2015  
Turkish (tr), 2018  
Tsonga (ts), 2019  
Tatar (tt), 2020  
Twi (tw), 2023  
Ukrainian (uk), 2111  
Urdu (ur), 2118  
Uzbek (uz), 2126  
Vietnamese (vi), 2209  
Volapük (vo), 2215  
Wolof (wo), 2315  
Xhosa (xh), 2408  
Yoruba (yo), 2515  
Zulu (zu), 2621  
Afar (aa), 0101  
Abkhazian (ab), 0102  
Afrikaans (af), 0106  
Amharic (am), 0113  
Arabic (ar), 0118  
Assamese (as), 0119  
Aymara (ay), 0125  
Azerbaijani (az), 0126  
Bashkir (ba), 0201  
Byelorussian (be), 0205  
Bulgarian (bg), 0207  
Bihari (bh), 0208  
Bislama (bi), 0209  
Bengali (bn), 0214  
Tibetan (bo), 0215  
Breton (br), 0218  
Latin (la), 1201  
Lingala (ln), 1214  
Laothian (lo), 1215  
Lithuanian (lt), 1220  
Latvian (lv), 1222  
Malagasy (mg), 1307  
Maori (mi), 1309  
Macedonian (mk), 1311  
Malayalam (ml), 1312  
Mongolian (mn), 1314  
Moldavian (mo), 1315  
Marathi (mr), 1318  
Malay (ms), 1319  
Croatian (hr), 0818  
Hungarian (hu), 0821  
Armenian (hy), 0825  
Interlingua (ia), 0901  
Interlingue (ie), 0905  
Inupiak (ik), 0911  
Somali (so), 1915  
Albanian (sq), 1917  
Maltese (mt), 1320  
BD/DVD country/area code list  
Country/Area, Country/Area code, Country/Area code letter  
Argentina, 0118, ar  
Australia, 0121, au  
Austria, 0120, at  
Belgium, 0205, be  
Brazil, 0218, br  
Finland, 0609, fi  
France, 0618, fr  
Germany, 0405, de  
Hong Kong, 0811, hk  
India, 0914, in  
Malaysia, 1325, my  
Mexico, 1324, mx  
Netherlands, 1412, nl  
New Zealand, 1426, nz  
Norway, 1415, no  
Singapore, 1907, sg  
Spain, 0519, es  
Switzerland, 0308, ch  
Sweden, 1905, se  
Taiwan, 2023, tw  
Canada, 0301, ca  
Chile, 0312, cl  
China, 0314, cn  
Indonesia, 0904, id  
Italy, 0920, it  
Japan, 1016, jp  
Pakistan, 1611, pk  
Philippines, 1608, ph  
Portugal, 1620, pt  
Thailand, 2008, th  
United Kingdom, 0702, gb  
United States of America, 2119, us  
Denmark, 0411, dk  
Republic of Korea, 1118, kr  
Russian Federation, 1821, ru  
Troubleshooting  
Incorrect operation is often mistaken for trouble or malfunction. If you think that there is something wrong with this component, check the  
points below. Sometimes the trouble may lie in another component. Inspect the other components and electrical appliances being used. If  
the trouble cannot be rectified after checking the items below, please contact customer services. In the US, call Toll Free (800) 421-1404.  
(Telephone lines are open Monday through Friday 6:00 AM to 4:30 PM (Pacific Time) and Saturday 8:00 AM to 4:30 PM (Pacific Time).) In  
Canada, call Local (905) 479-4411, or Long distance +1(877) 283-5901. (Telephone lines are open Monday through Friday 9:00 AM to 5:15 PM  
(EST).)  
Playback troubleshooting  
Problem  
Remedy  
The disc won’t play or is automatically  
ejected after loading.  
• Make sure the disc is free from dirt and dust and is not damaged (see Taking care of your player and  
discs on page 46).  
• Make sure the disc is loaded with the label side face-up and aligned properly in the disc tray guide.  
• Incompatible region: If the region on a BD-ROM or DVD-Video disc does not match the region on the  
player, the disc cannot be used (see BD-ROM regions and DVD-Video regions on page 10).  
• Condensation inside the player: Allow time for condensation to evaporate. Avoid using the player  
near an air-conditioning unit.  
• Make sure the disc is compatible with this player (see Disc/content format playback compatibility on  
page 9).  
49  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Problem  
Remedy  
09  
Picture freezes and the front panel and  
remote control buttons stop working.  
• Press (stop), then start playback again ((play)).  
• Press the front panel STANDBY/ON button to switch the power off, then switch back on and  
restart playback. If the power fails to switch off, press and hold STANDBY/ON for 20 seconds  
until the power switches off. Then switch on again by pressing STANDBY/ON.  
• Unplug from the wall socket, then plug back in and switch on again by pressing STANDBY/ON to  
switch the player on.  
No picture/No color.  
• Incorrect video connections: Check that connections are correct and that plugs are inserted fully.  
Also check the video cable for damage.  
• TV/monitor or AV amplifier settings are incorrect: Check the instruction manual of the connected  
equipment.  
• Depending on your display, some of the settings may result in the picture disappearing. In this case,  
press OUTPUT RESOLUTION repeatedly until the picture re-appears (see Changing the output video  
resolution on page 14).  
• Some BD-ROM discs output video only over HDMI.  
The video output is set to 720p/1080i/  
1080p, but the actual output is 480i or  
480p.  
• For copy-protection purposes, DVD-Video and some BD-ROM discs output 480i or 480p over the  
component output.  
Screen is stretched or aspect does not  
change.  
• The TV Aspect Ratio or 4:3 Video Out setting in the Initial Setup menu is incorrect. See  
TV Aspect Ratio and 4:3 Video Out on page 41 for how to set these correctly for your TV/monitor.  
• When output video resolution is set to 720p, 1080i or 1080p, video is output in 16:9 Widescreen  
format even if TV Aspect Ratio is set to 4:3 (Standard).  
Picture disturbance during playback or  
dark image.  
• This player is compatible with Macrovision System copy guard. Some discs include a copy  
prevention signal, and when this type of disc is played back, stripes etc., may appear on some  
sections of the picture depending on the TV. This is not a malfunction.  
• Due to the player’s copy protection circuits, connection of this device through a VCR or an AV  
selector may cause picture problems. This is not a malfunction.  
No audio, or audio is distorted.  
• No audio is output during slow motion playback or when scanning contents.  
• Check your amplifier/receiver’s settings (volume, input function, speaker settings, etc.).  
• Check that the disc is free from dust and dirt, and that it is not damaged (Taking care of your player  
and discs on page 46).  
• Check that all interconnects are firmly inserted.  
• Check that the plugs and terminals are free of dirt, oxide, etc. and clean if necessary. Also check the  
cable for damage.  
• Make sure the player’s output is not connected to the amplifier’s phono (turntable) inputs.  
• Check the Audio Output Mode on page 43. If this is set to 5.1 Channel, output from the AUDIO  
OUT (2ch) jacks will be incorrect.  
• Check the Speaker Setup on page 45.  
• For copy-protection purposes, some BD-ROM discs only output audio over optical/coaxial and  
HDMI.  
• When Audio CDs containing text files or such data are played back, sound is muted.  
The analog audio is OK, but there appears • Check that the Dolby Digital Out and DTS Out settings (page 42) are suitable for your amplifier/  
to be no optical/coaxial digital audio  
signal.  
receiver — check the instruction manual that came with your amplifier/receiver (also check that the  
output settings on your amplifier/receiver are correct).  
Cannot play multi-channel audio.  
• Check the audio options available from the disc menu.  
• Multi-channel 192 kHz audio is output in 2 channels.  
• Check that the Dolby Digital Out and DTS Out settings (page 42) are suitable for your amplifier/  
receiver — check the instruction manual that came with your amplifier/receiver.  
• If you connected this player to your amplifier/receiver using the 5.1 channel analog outputs, make  
sure the Audio Output Mode (page 43) and Speaker Setup (page 45) are set correctly.  
• If you connected this player to your amplifier/receiver using HDMI, or the optical/coaxial digital  
outputs, make sure that the output settings on your amplifier/receiver are correct (refer to the  
instruction manual that came with your amplifier/receiver).  
To use the 7.1ch setting for Dolby Digital Out, set Dolby Digital PCM (page 42).  
Noise is output when DTS audio is played. • If this unit is connected to a non-DTS compatible amplifier or decoder using a digital audio cable,  
set DTS Out to DTS PCM (page 42). If you do not do this, noise will be output when you play a  
DTS disc.  
Cannot output 96 kHz or 192 kHz digital  
audio from optical/coaxial digital output.  
• The player does not output digital audio from the optical/coaxial jacks at this sampling rate. The  
digital output is automatically downsampled.  
50  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Problem  
Remedy  
09  
Disc containing PC files won’t play.  
• Make sure the disc is compatible with this player (see Disc/content format playback compatibility on  
page 9).  
• This player is compatible with multi-border discs, but only plays the first border.  
• Check that the file complies to one of the supported formats, bit rates or profiles (see File  
compatibility on page 9). Also check that the file is not damaged.  
• If the message ‘Cannot play this format’ is displayed when you try to play PC files, check the file  
formats.  
• This player cannot play DRM-protected content on DVD and DRM-protected titles appear in the Disc  
Navigator with a lock icon ( ).  
No picture or High Definition video output • For copy-protection purposes, composite, S-Video and component video output may not possible.  
when watching a BD. See Connecting for HDMI output on page 13 to connect using HDMI.  
Image is blurred when you begin playback • Certain televisions cause blur effects when playback of a disc begins. This is not a malfunction.  
of a disc.  
Tracks/files are repeated during random  
play.  
• Because tracks/files are selected entirely at random, same tracks/files may be played in quick  
succession. For example, ‘Track 1’ may be followed by ‘Track 5,’ only to have ‘Track 1’ play again next.  
This is not a malfunction.  
SlideShows do not play.  
• If you have selected a single file and select Slideshow from the Photo Options menu, then only  
that single file is played back. To play a slideshow you must select All Photos from the browse  
menu.  
Images no longer displayed when you  
change the 24p Direct Out setting to On.  
• Depending on your display, some of the settings may result in the picture disappearing. In this case,  
press OUTPUT RESOLUTION repeatedly until the picture re-appears (see Changing the output video  
resolution on page 14).  
CDs cannot be copied on other external  
components.  
• The audio signals of a CD output at the jacks of this player are protected from copying and cannot  
be copied on other external components.  
To copy the audio signals recorded on a CD, connect your external components to the AUDIO OUT  
(2ch) jacks of this player.  
HDMI troubleshooting  
Problem  
Remedy  
No HDMI video output. (A connected  
HDMI component doesn’t work with this  
player.)  
• This unit has been designed to be compliant with HDMI (High-Definition Multimedia Interface).  
Depending on the component you have connected, unreliable signal transfers may result.  
• If you connect a DVI device to the HDMI output of this player, ensure that it is compliant with  
High-bandwidth Digital Content Protection (HDCP).  
• If the front panel HDMI indicator is unlit then:  
– Make sure that you’ve selected this player as the HDMI input in the settings for the component  
you’re using. You may need to refer to the instruction manual of the component to do this.  
– Check that the HDMI cable is connected properly and that the cable isn’t damaged.  
• If the front panel HDMI indicator is lit:  
– Depending on your display, some of the settings may result in the picture disappearing. In this case,  
press OUTPUT RESOLUTION repeatedly until the picture re-appears (see Changing the output video  
resolution on page 14).  
Depending on the HDMI cable being used, 1080p output may not appear correctly.  
Colors are too rich or too weak, or black is • Use a different HDMI Color Space setting (page 41).  
too deep or appears to ‘float’.  
No HDMI audio output.  
• If you have connected to an HDCP-compatible DVI component, there won’t be any audio output  
from the HDMI terminal. Connect using the optical/coaxial digital outputs (or the analog outputs).  
• Verify that the connected HDMI device is compatible with Dolby TrueHD or Dolby Digital Plus (i.e. if  
bitstream output is allowed). If the HDMI device is not compatible, the audio will be converted into  
Dolby Digital or Linear PCM.  
51  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Problem  
Remedy  
09  
HDMI Control does not function.  
• Verify that the HDMI cable is firmly connected.  
• Make sure that this unit’s HDMI Control is set to On (page 43).  
• Make sure that the HDMI Control for the connected components is set to On. For more information,  
refer to the operating manual for the connected component.  
• This function may not work properly if you have multiple components connected to a single plasma  
display or AV system (amplifier or AV receiver etc.). For more information refer to the operating  
manual of your plasma display or AV system.  
• You can enable HDMI Control by turning the HDMI Control setting to On for all components  
connected via HDMI cable. Check the video output from this unit once you have completed making  
connections and settings for all components. You will need to check the video output each time you  
change connected components or remove the HDMI cable.  
• Check whether the connected component supports HDMI Control or not. For more information refer  
to the operating manual of your plasma display or AV system (amplifier or AV receiver etc.).  
• Certain functions are not supported on some plasma displays.  
• This player does not support HDMI Control-compatible components other than those made by  
Pioneer.  
• This unit will not function properly with components that do not support HDMI Control, or when  
connected with components other than those made by Pioneer.  
• The HDMI Control functions may not operate properly if you do not use an HDMI cable that supports  
the HDMI 1.3 specification (Category 2) or later.  
Network troubleshooting  
Problem  
Remedy  
Home Media Gallery is not available.  
• LAN indicator is unlit:  
– Check the physical connections (hub, 100BASE-TX, or other cable quality).  
• LAN indicator is lit:  
– If this player’s IP address is set automatically, make sure that the media server’s address is also set  
automatically. If the IP address of the media server has been set manually, set the IP address of the  
player manually too (see Network on page 43).  
– Check the logical connections (IP address setup, DHCP, etc.). Confirm that the IP address is correct  
if acquired using DHCP or Auto-IP in the Network Config. screen that follows the Initial Setup menu  
(see page 43).  
– Confirm that the media server is on and not in standby or sleep mode.  
– Check the network and other settings on the media server.  
– Check that this player and the media server are on the same Local Area Network (LAN).  
– Check if the media server (Windows Media Player 11, Windows Media Connect or DLNA-compliant)  
is running. Restart if necessary.  
– Check if the media server is setup correctly for file sharing, if the target folder has been deleted or if  
one or more folders has become corrupted on the server.  
– Check if the PC is operating properly. Reboot the PC after confirming its specifications and setup.  
A connected media server does not show • Confirm that the media server is on and not in standby or sleep mode.  
up in the source list in the Home Media  
Gallery.  
• Check the network and other settings on the media server.  
• Check that this player and the media server are on the same Local Area Network (LAN).  
• Check if the media server (Windows Media Player 11, Windows Media Connect or DLNA-compliant)  
is running. Restart if necessary.  
• Check if the media server is setup correctly for file sharing, if the target folder has been deleted or if  
one or more folders has become corrupted on the server.  
• Check if the PC is operating properly. Reboot the PC after confirming its specifications and setup.  
• Check that there are playable files on the media server.  
• After adding a new media server, exit the Home Media Gallery then, after a few moments, re-enter it.  
A media server shows up in the source list • Check the media server setup. If a client is registered (authorized) manually, the setup procedure  
but is not available (a lock icon (  
appears).  
)
may have to be run again.  
• Check that there are playable files on the media server.  
• After adding a new media server, exit the Home Media Gallery then, after a few moments, re-enter it.  
Content different from last time appears  
on the network (missing items, etc.).  
• If the player cannot connect to the same server as last time (because it is switched off, for example),  
the player will connect to another server on the network. To see content on a particular server, make  
sure it is running and then select it as the source in the Home Media Gallery (see Movie sources on  
page 34).  
52  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Problem  
Remedy  
09  
Cannot play or display.  
• Check the physical connections (hub, 100BASE-TX, or other cable quality).  
• Check if the file complies to the supported format, bit rate or profile (see File compatibility on  
page 9). Also check if the file is damaged.  
• If the message ‘Cannot play this format’ is displayed when you try to play PC files, check the file  
formats.  
• It takes time to capture and display a large-sized image; during this time you may have to wait to  
operate the player.  
• This player cannot play DRM-protected content stored on a DLNA server (not a Windows Media  
Player 11 or Windows Media Connect server).  
• Some files that comply with one of the supported formats may not play or be displayed.  
• Check if there are too many files on the server.  
• Check if the PC is operating properly. Reboot the PC after confirming its specification and setup.  
Image or sound is interrupted or distorted • Check the physical connections (hub, 100BASE-TX, or other cable quality). It is strongly  
(block noise appears).  
recommended to use 100BASE-TX for playback quality and display speed.  
• When connected by a wireless LAN, check if the bit rate is sufficient.  
• Check that the file complies with the supported format, bit rate or profile (see File compatibility on  
page 9). Also check if the file is damaged.  
• Some files that comply with one of the supported formats may not play or be displayed.  
• Check if the PC is operating properly. Reboot the PC after confirming its specification and setup.  
Genre (movie), Playlist (music), Album  
(photo) or folder configuration differs from  
one server to another.  
• The configuration may change depending on server type. This is not a malfunction.  
An available server is selected but cannot • Check if the server is correctly set up for file sharing, if the target folder has been deleted, or if one or  
be navigated.  
more folders have been corrupted on the server.  
• Check if there are too many files on the server.  
‘Cannot connect to server.’ is displayed • The message is displayed when connection to the server failed. Verify that the network cable is  
when network downloading is attempt.  
connected properly before retrying.  
“WRT FAILED” is displayed on the front  
panel display during network downloading.  
• The message is displayed when downloading failed. As the player may be failed, contact your local  
Pioneer Customer Service Center.  
Miscellaneous troubleshooting  
Problem  
Remedy  
It is taking a long time for the unit to start • It can take up to one minute for the system to start up once you press the STANDBY/ON button.  
up.  
This does not mean that the player is experiencing problems.  
The power automatically turns off.  
• The Auto Power Off function switches the player into standby if no operation is performed for  
30 minutes while the player is stopped or paused (page 43).  
• This unit’s power may be turned off when you control this unit from a connected TV. If you do not  
want this unit to be turned off in this way, set this unit’s HDMI Control (page 43) to Off.  
Your TV and AV system automatically  
change inputs.  
• The connected TV and AV system automatically may change inputs in response to this unit starting  
playback or having the GUI screen (ex. Disc Navigator) displayed. If you do not want your TV and AV  
system to change inputs in this way, set this unit HDMI Control (page 43) to Off.  
The remote control doesn’t seem to work. • The CONTROL IN jack on the rear panel is connected: Point the remote control at the connected  
component to control this player.  
• The remote control is too far from the player, or the angle with the remote sensor is too wide: Use  
the remote within its operating range (see Using the remote control on page 8).  
• The batteries are exhausted: Put in new ones (see Putting the batteries in the remote control on  
page 8).  
• If you are using an external IR receiver, you may need to set the IR RECEIVER switch (see Using an  
external IR receiver with this player on page 17).  
Settings are canceled.  
• When the power is cut due to power failure or by unplugging the power cord during operation,  
settings will be canceled. See Moving the player on page 47 for proper shutdown instructions.  
After inserting a disc, a ‘Loading’ message • When you have inserted a disc containing PC files, the time necessary to load the files contained on  
is displayed but playback does not begin.  
the disc varies by how many files are present. The process can take anywhere from a few minutes to  
upwards of ten minutes.  
On hybrid discs with BD and DVD layers, • Change the Set hybrid disc playback layer to DVD (page 43).  
the DVD layer cannot be played back.  
53  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Problem  
Remedy  
09  
On hybrid discs with BD and CD layers,  
the CD layer cannot be played back.  
• Change the Set hybrid disc playback layer to CD (page 43).  
When the Set hybrid disc playback layer • When the layer set to playback at Set hybrid disc playback layer is not present on an inserted hybrid  
is set to DVD and you insert a hybrid disc  
with BD and CD layers, the BD layer is  
played back.  
disc, the BD layer is played back.  
The Set hybrid disc playback layer  
setting cannot be changed (it is grayed  
out).  
• You cannot change the Set hybrid disc playback layer when a disc is inserted. Eject the disc to  
make changes.  
A ‘’ appears in the file name.  
• A character that cannot be displayed on this unit is included in the file name. Use only  
alphanumeric characters if you want file names to be displayed correctly on this player.  
The power automatically turns on.  
• This unit’s power may be turned on when you control this unit from a connected plasma display. If  
you do not want this unit to be turned on in this way, set this unit’s HDMI Control to Off (page 43).  
Dolby Digital Plus  
Glossary  
Dolby Digital Plus is the next-generation audio technology for all  
high-definition programming and media. It combines the efficiency  
to meet future broadcast demands with the power and flexibility to  
realize the full audio potential expected in the upcoming high-  
definition era. Built on Dolby Digital, the multi-channel audio  
standard for BD and DVD, Dolby Digital Plus has been designed for  
the next-generation AV Systems (amplifier or AV receiver) but  
remains fully compatible with all current AV Systems.  
Analog audio  
An electrical signal that directly represents sound. Compare this to  
digital audio which can also be an electrical signal, but is an indirect  
representation of sound. See also Digital audio.  
Aspect ratio  
The width of a TV screen relative to its height. Conventional TVs are  
4:3 (in other words, the screen is almost square); widescreen  
models are 16:9 (the screen is almost twice as wide as it is high).  
Dolby Digital Plus delivers multi-channel audio programs of up to  
7.1 channels and supports multiple programs in a single encoded  
bitstream with the maximum bit rate potential of 6 Mbps and the  
maximum bit rate performance of 1.7 Mbps on BD, and it outputs  
Dolby Digital bitstreams for playback on existing Dolby Digital  
systems. Dolby Digital Plus can accurately reproduce the sound  
originally intended by directors and producers.  
BD-J  
BD-J is the Java specification for BD-ROM, allowing content  
providers to put interactive material linked to specific titles on the  
disc.  
It also features multi-channel sound with discrete channel output,  
interactive mixing and streaming capability in advanced systems.  
BDAV  
Supported by HDMI (High-Definition Multimedia Interface), a single-  
cable digital connection is possible for high-definition audio and  
video.  
BDAV is one of the application formats used by writable Blu-ray  
Discs (BD-R or BD-RE). It corresponds to the VR mode of the DVD  
standard.  
Dolby TrueHD  
BDMV  
Dolby TrueHD is the next-generation lossless encoding technology  
developed for high-definition optical discs in the upcoming era.  
BDMV is one of the Blu-ray Disc standards (application standard for  
BD-ROM). It corresponds to the Video mode of the DVD standard.  
Dolby TrueHD delivers tantalizing sound that is bit-for-bit identical to  
the studio master, unlocking the true high-definition entertainment  
experience on high-definition optical discs in the next generation.  
Default Gateway  
Default Gateway is a node on a computer network that serves as an  
access point to another network. A default gateway (such as a  
computer and router) is used to forward all traffic that is not  
addressed to a station within the local subnet.  
When coupled with high-definition video, Dolby TrueHD offers an  
unprecedented home theater experience with stunning sound and  
high-definition picture.  
DHCP (Dynamic Host Configuration Protocol) Server  
A DHCP server is a server that allocates IP addresses to hosts  
(network devices). In most cases, a broadband router serves as a  
DHCP server in a home network.  
It supports bit rates of up to 18 Mbps and records up to 8 full-range  
channels individually with 24-bit/96 kHz audio. It also features  
extensive metadata including dialogue normalization and dynamic  
range control. Supported by HDMI (High-Definition Multimedia  
Interface), a single-cable digital connection is possible for high-  
definition audio and video. BD standards currently limit their  
maximum number of audio channels to eight, whereas Dolby Digital  
Plus and Dolby TrueHD support more than eight audio channels.  
Digital audio  
An indirect representation of sound by numbers. During recording,  
the sound is measured at discrete intervals by an analog-to-digital  
converter, generating a stream of numbers. On playback, a  
digital-to-analog converter generates an analog signal based on  
these numbers. See also Sampling frequency and Analog audio.  
DRM (Digital Rights Management)  
DRM is one of several technologies that controls access to and use  
of digital data, such as music, movies and other copyrighted  
contents.  
54  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DTS-HD High Resolution Audio  
Progressive scan video  
09  
DTS-HD High Resolution Audio provides sound quality which far  
outpaces that of the current DVD discs with constant data rates  
from 1.5 Mbps to 6.0 Mbps for Blu-ray Disc. DTS-HD High  
Resolution Audio is capable of up to 7.1 channels of audio at a  
sampling frequency of 96 kHz/24 bits so the original sound is finely  
and faithfully reproduced with less disc space compared to DTS-HD  
Master Audio. The result of using DTS-HD High Resolution Audio  
use is especially significant when watching high definition video as  
the sound that is clearer than ever creates the whole new movie  
experience right at home.  
Also called non-interlaced video, this method of displaying a picture  
updates all the lines in one pass, resulting in a more stable,  
flicker-free image than interlaced video (for a given scanning rate).  
See also Interlaced video.  
Regions (DVD-Video and BD-ROM)  
These associate discs and players with particular areas of the world.  
This unit will only play discs that have a compatible region code (i.e.,  
the same code as your player). You can find the region code of your  
unit by looking on the rear panel. Some discs are compatible with  
more than one region (or all regions).  
Dynamic range  
Note that the region systems for DVD and BD are not the same.  
The difference between the quietest and loudest sounds possible in  
an audio signal (without distorting or getting lost in noise). Dolby  
Digital and DTS soundtracks are capable of a very wide dynamic  
range, delivering dramatic cinema-like effects.  
Sampling frequency  
The rate at which sound is measured to be turned into digital audio  
data. The higher the rate, the better the sound quality, but the more  
digital information is generated. For example, a sampling frequency  
of 44.1 kHz means 44 100 samples (measurements) per second. See  
also Digital audio.  
Ethernet  
A frame-based computer networking technology for local area  
networks (LANs). This player supports 100BASE-TX.  
Subnet mask  
File extension  
The IP address is divided into the network address part and the host  
address part. The subnet mask is expressed as ‘255.255.255.0’. In  
most cases, the subnet mask is automatically assigned by the  
DHCP server.  
A tag added to the end of a filename to indicate the type of file. For  
example, “.jpg” indicates an JPEG image file.  
HDMI  
HDMI (High-Definition Multimedia Interface) is a high-speed digital  
interface which has the capability to support standard or  
high-definition video plus standard to multi-channel  
surround-sound audio on a single digital connection.  
Interactive audio  
Interactive audio is Linear PCM (LPCM) audio activated by a  
BD-ROM application and mixed with the primary audio. It is typically  
used to provide dynamic sounds associated with interactive  
applications, such as button sounds.  
Interlaced video  
A method of displaying a picture in which odd-numbered lines are  
updated in one pass, then even-numbered lines updated in the next.  
See also Progressive scan video.  
IP (Internet Protocol) address  
A unique number that devices use in order to identify and  
communicate with each other on a network utilizing the Internet  
Protocol standard, such as ‘192.168.0.1’. No duplicate numbers are  
allowed in the network.  
LAN cable  
A cable that has an 8-pin modular plug on each end and is different  
from a telephone plug which has 4-pins.  
MAC (Media Access Control) address  
An address attached to the port of any device. The MAC address  
cannot be changed.  
PCM (Pulse Code Modulation)  
A common system of encoding digital audio. Excellent quality, but  
requires a lot of data compared to formats such as Dolby Digital and  
MPEG audio. For compatibility with digital audio recorders and AV  
amplifiers with digital inputs, this unit can convert Dolby Digital,  
DTS and MPEG audio to PCM. See also Digital audio.  
Pop-up menu (BD only)  
A context-sensitive menu that can be used without interrupting  
playback of a BD.  
55  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
License  
09  
[MPEG4IP]  
[OpenSSL]  
OpenSSL License  
Copyright © 1998-2004 The OpenSSL Project. All rights reserved.  
Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:  
1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.  
2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or  
other materials provided with the distribution.  
3. All advertising materials mentioning features or use of this software must display the following acknowledgment: “This product includes software developed  
by the OpenSSL Project for use in the OpenSSL Toolkit. (http://www.openssl.org/)”.  
4. The names “OpenSSL Toolkit” and “OpenSSL Project” must not be used to endorse or promote products derived from this software without prior written  
permission. For written permission, please contact [email protected].  
5. Products derived from this software may not be called “OpenSSL” nor may “OpenSSL” appear in their names without prior written permission of the  
OpenSSL Project.  
6. Redistributions of any form whatsoever must retain the following acknowledgment: “This product includes software developed by the OpenSSL Project for  
use in the OpenSSL Toolkit (http://www.openssl.org/)”.  
THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT “AS IS” AND ANY EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,  
THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE OpenSSL  
PROJECT OR ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES  
(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS  
INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE  
OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.  
This product includes cryptographic software written by Eric Young ([email protected]). This product includes software written by Tim Hudson  
Original SSLeay License  
Copyright © 1995-1998 Eric Young ([email protected])  
All rights reserved.  
This package is an SSL implementation written by Eric Young ([email protected]). The implementation was written so as to conform with Netscapes SSL.  
This library is free for commercial and non-commercial use as long as the following conditions are aheared to. The following conditions apply to all code found  
in this distribution, be it the RC4, RSA, lhash, DES, etc., code; not just the SSL code. The SSL documentation included with this distribution is covered by the  
same copyright terms except that the holder is Tim Hudson ([email protected]).  
Copyright remains Eric Young’s, and as such any Copyright notices in the code are not to be removed. If this package is used in a product, Eric Young should  
be given attribution as the author of the parts of the library used. This can be in the form of a textual message at program startup or in documentation (online  
or textual) provided with the package.  
Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:  
1. Redistributions of source code must retain the copyright notice, this list of conditions and the following disclaimer.  
2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or  
other materials provided with the distribution.  
3. All advertising materials mentioning features or use of this software must display the following acknowledgement: “This product includes cryptographic  
software written by Eric Young ([email protected])”  
The word ‘cryptographic’ can be left out if the routines from the library being used are not cryptographic related:-).  
4. If you include any Windows specific code (or a derivative thereof) from the apps directory (application code) you must include an acknowledgement: “This  
product includes software written by Tim Hudson ([email protected])”  
THIS SOFTWARE IS PROVIDED BY ERIC YOUNG “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED  
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR  
CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT  
LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER  
CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING  
IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.  
The licence and distribution terms for any publically available version or derivative of this code cannot be changed. i.e. this code cannot simply be copied and  
put under another distribution licence [including the GNU Public Licence.]  
56  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
[tiff]  
09  
Copyright © 1988-1997 Sam Leffler  
Copyright © 1991-1997 Silicon Graphics, Inc.  
THE SOFTWARE IS PROVIDED “AS-IS” AND WITHOUT WARRANTY OF ANY KIND, EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION,  
ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE  
FOR ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF  
USE, DATA OR PROFITS, WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF LIABILITY, ARISING OUT OF OR IN  
CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.  
[Howl]  
Copyright © 2003, 2004 Porchdog Software All rights reserved.  
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING,  
BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT  
SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL  
DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS  
INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE  
OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.  
[UPNPLib/Intel Stack]  
[JPEG image compression]  
If only executable code is distributed, then the accompanying documentation must state that “this software is based in part on the work of the Independent  
JPEG Group”.  
[libpng]  
COPYRIGHT NOTICE, DISCLAIMER, and LICENSE:  
If you modify libpng you may insert additional notices immediately following this sentence. libpng version 1.2.6, December 3, 2004, is Copyright © 2004 Glenn  
Randers-Pehrson, and is distributed according to the same disclaimer and license as libpng-1.2.5 with the following individual added to the list of Contributing  
Authors  
Cosmin Truta  
libpng versions 1.0.7, July 1, 2000, through 1.2.5 - October 3, 2002, are Copyright © 2000-2002 Glenn Randers-Pehrson, and are distributed according to the  
same disclaimer and license as libpng-1.0.6 with the following individuals added to the list of Contributing Authors  
Simon-Pierre Cadieux  
Eric S. Raymond  
Gilles Vollant  
and with the following additions to the disclaimer:  
There is no warranty against interference with your enjoyment of the library or against infringement. There is no warranty that our efforts or the library will fulfill  
any of your particular purposes or needs. This library is provided with all faults, and the entire risk of satisfactory quality, performance, accuracy, and effort is  
with the user.  
libpng versions 0.97, January 1998, through 1.0.6, March 20, 2000, are Copyright © 1998, 1999 Glenn Randers-Pehrson, and are distributed according to the  
same disclaimer and license as libpng-0.96, with the following individuals added to the list of Contributing Authors:  
Tom Lane  
Glenn Randers-Pehrson  
Willem van Schaik  
libpng versions 0.89, June 1996, through 0.96, May 1997, are Copyright © 1996, 1997 Andreas Dilger Distributed according to the same disclaimer and license  
as libpng-0.88, with the following individuals added to the list of Contributing Authors:  
John Bowler  
Kevin Bracey  
Sam Bushell  
Magnus Holmgren  
Greg Roelofs  
Tom Tanner  
libpng versions 0.5, May 1995, through 0.88, January 1996, are Copyright © 1995, 1996 Guy Eric Schalnat, Group 42, Inc.  
For the purposes of this copyright and license, “Contributing Authors” is defined as the following set of individuals:  
Andreas Dilger  
Dave Martindale  
Guy Eric Schalnat  
Paul Schmidt  
Tim Wegner  
57  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
The PNG Reference Library is supplied “AS IS”. The Contributing Authors and Group 42, Inc. disclaim all warranties, expressed or implied, including, without  
limitation, the warranties of merchantability and of fitness for any purpose. The Contributing Authors and Group 42, Inc. assume no liability for direct, indirect,  
incidental, special, exemplary, or consequential damages, which may result from the use of the PNG Reference Library, even if advised of the possibility of such  
damage.  
09  
Permission is hereby granted to use, copy, modify, and distribute this source code, or portions hereof, for any purpose, without fee, subject to the following  
restrictions:  
1. The origin of this source code must not be misrepresented.  
2. Altered versions must be plainly marked as such and must not be misrepresented as being the original source.  
3. This Copyright notice may not be removed or altered from any source or altered source distribution.  
The Contributing Authors and Group 42, Inc. specifically permit, without fee, and encourage the use of this source code as a component to supporting the PNG  
file format in commercial products. If you use this source code in a product, acknowledgment is not required but would be appreciated.  
A “png_get_copyright” function is available, for convenient use in “about” boxes and the like: printf(“%s”,png_get_copyright(NULL)); Also, the PNG logo (in PNG  
format, of course) is supplied in the files “pngbar.png” and “pngbar.jpg (88x31)” and “pngnow.png” (98x31).  
Libpng is OSI Certified Open Source Software. OSI Certified Open Source is a certification mark of the Open Source Initiative.  
Glenn Randers-Pehrson  
glennrp at users.sourceforge.net  
December 3, 2004  
[zlib]  
[FreeType]  
The FreeType Project is Copyright © 1996-2000 by David Turner, Robert Wilhelm, and Werner Lemberg. All rights reserved except as specified below.  
THE FREETYPE PROJECT IS PROVIDED “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO,  
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT WILL ANY OF THE AUTHORS OR COPYRIGHT HOLDERS  
BE LIABLE FOR ANY DAMAGES CAUSED BY THE USE OR THE INABILITY TO USE, OF THE FREETYPE PROJECT.  
[GIFLIB]  
The GIFLIB distribution is Copyright © 1997 Eric S. Raymond  
THE SOFTWARE IS PROVIDED “AS IS”, WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES  
OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS  
BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR  
IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.  
[libhttp]  
Copyright © 2000-2004 Dag-Erling Smørgrav  
All rights reserved.  
Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:  
1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer in this position and unchanged.  
2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or  
other materials provided with the distribution.  
3. The name of the author may not be used to endorse or promote products derived from this software without specific prior written permission.  
THIS SOFTWARE IS PROVIDED BY THE AUTHOR “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED  
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR  
ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF  
SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF  
LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF  
THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.  
The following copyright applies to the base64 code:  
Copyright 1997 Massachusetts Institute of Technology  
Permission to use, copy, modify, and distribute this software and its documentation for any purpose and without fee is hereby granted, provided that both the  
above copyright notice and this permission notice appear in all copies, that both the above copyright notice and this permission notice appear in all supporting  
documentation, and that the name of M.I.T. not be used in advertising or publicity pertaining to distribution of the software without specific, written prior  
permission. M.I.T. makes no representations about the suitability of this software for any purpose. It is provided “as is” without express or implied warranty.  
THIS SOFTWARE IS PROVIDED BY M.I.T. “AS IS”. M.I.T. DISCLAIMS ALL EXPRESS OR IMPLIED WARRANTIES WITH REGARD TO THIS SOFTWARE,  
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL  
M.I.T. BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,  
PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON  
ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT  
OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.  
58  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
[Vera.ttf/VeraMono.ttf]  
09  
Copyright © 2003 by Bitstream, Inc. All Rights Reserved. Bitstream Vera SansBitstreamVeraSans-RomanRelease 1.10 Copyright © 2003 by Bitstream, Inc. All  
Rights Reserved. Bitstream Vera is a trademark of Bitstream, Inc.  
[TinyLogin]  
This software is Copyright 1988 - 1994, Julianne Frances Haugh. All rights reserved.  
[Shadow Utilities]  
This software is Copyright 1988 - 1994, Julianne Frances Haugh. All rights reserved.  
Bigelow & Holmes Inc and URW++ GmbH Luxi font license  
[Luxi fonts]  
Luxi fonts Copyright © 2001 by Bigelow & Holmes Inc. Luxi font instruction code Copyright © 2001 by URW++ GmbH. All Rights Reserved. Luxi is a regis-tered  
trademark of Bigelow & Holmes Inc.  
THE FONT SOFTWARE IS PROVIDED “AS IS”, WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY  
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OF COPYRIGHT, PATENT, TRADEMARK, OR  
OTHER RIGHT. IN NO EVENT SHALL BIGELOW & HOLMES INC. OR URW++GMBH. BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,  
INCLUDING ANY GEN-ERAL, SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, WHETHER IN AN ACTION OF CONTRACT, TORT OR  
OTHERWISE, ARISING FROM, OUT OF THE USE OR INABILITY TO USE THE FONT SOFTWARE OR FROM OTHER DEALINGS IN THE FONT SOFT-WARE.  
[GNU GENERAL PUBLIC LICENSE]  
Version 2, June 1991  
Copyright © 1989, 1991 Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA  
Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed.  
Preamble  
The licenses for most software are designed to take away your freedom to share and change it. By contrast, the GNU General Public License is intended to  
guarantee your freedom to share and change free software to make sure the software is free for all its users. This General Public License applies to most of  
the Free Software Foundation’s software and to any other program whose authors commit to using it. (Some other Free Software Foundation software is  
covered by the GNU Lesser General Public License instead.) You can apply it to your programs, too.  
When we speak of free software, we are referring to freedom, not price. Our General Public Licenses are designed to make sure that you have the freedom to  
distribute copies of free software (and charge for this service if you wish), that you receive source code or can get it if you want it, that you can change the  
software or use pieces of it in new free programs; and that you know you can do these things.  
To protect your rights, we need to make restrictions that forbid anyone to deny you these rights or to ask you to surrender the rights. These restrictions translate  
to certain responsibilities for you if you distribute copies of the software, or if you modify it.  
For example, if you distribute copies of such a program, whether gratis or for a fee, you must give the recipients all the rights that you have. You must make  
sure that they, too, receive or can get the source code. And you must show them these terms so they know their rights.  
We protect your rights with two steps: (1) copyright the software, and (2) offer you this license which gives you legal permission to copy, distribute and/or modify  
the software.  
Also, for each author’s protection and ours, we want to make certain that everyone understands that there is no warranty for this free software. If the software  
is modified by someone else and passed on, we want its recipients to know that what they have is not the original, so that any problems introduced by others  
will not reflect on the original authors’ reputations.  
Finally, any free program is threatened constantly by software patents. We wish to avoid the danger that redistributors of a free program will individually obtain  
patent licenses, in effect making the program proprietary. To prevent this, we have made it clear that any patent must be licensed for everyone’s free use or not  
licensed at all.  
The precise terms and conditions for copying, distribution and modification follow.  
GNU GENERAL PUBLIC LICENSE  
TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION  
0. This License applies to any program or other work which contains a notice placed by the copyright holder saying it may be distributed under the terms of  
this General Public License. The “Program”, below, refers to any such program or work, and a “work based on the Program” means either the Program or  
any derivative work under copyright law: that is to say, a work containing the Program or a portion of it, either verbatim or with modifications and/or  
translated into another language. (Hereinafter, translation is included without limitation in the term “modification”.) Each licensee is addressed as “you”.  
Activities other than copying, distribution and modification are not covered by this License; they are outside its scope. The act of running the Program is  
not restricted, and the output from the Program is covered only if its contents constitute a work based on the Program (independent of having been made  
by running the Program). Whether that is true depends on what the Program does.  
1. You may copy and distribute verbatim copies of the Program’s source code as you receive it, in any medium, provided that you conspicuously and  
appropriately publish on each copy an appropriate copyright notice and disclaimer of warranty; keep intact all the notices that refer to this License and to  
the absence of any warranty; and give any other recipients of the Program a copy of this License along with the Program.  
You may charge a fee for the physical act of transferring a copy, and you may at your option offer warranty protection in exchange for a fee.  
2. You may modify your copy or copies of the Program or any portion of it, thus forming a work based on the Program, and copy and distribute such  
modifications or work under the terms of Section 1 above, provided that you also meet all of these conditions:  
59  
En  
a) You must cause the modified files to carry prominent notices stating that you changed the files and the date of any change.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
b) You must cause any work that you distribute or publish, that in whole or in part contains or is derived from the Program or any part thereof, to be licensed  
as a whole at no charge to all third parties under the terms of this License.  
09  
c) If the modified program normally reads commands interactively when run, you must cause it, when started running for such interactive use in the most  
ordinary way, to print or display an announcement including an appropriate copyright notice and a notice that there is no warranty (or else, saying that  
you provide a warranty) and that users may redistribute the program under these conditions, and telling the user how to view a copy of this License.  
(Exception: if the Program itself is interactive but does not normally print such an announcement, your work based on the Program is not required to  
print an announcement.)  
These requirements apply to the modified work as a whole. If identifiable sections of that work are not derived from the Program, and can be reasonably  
considered independent and separate works in themselves, then this License, and its terms, do not apply to those sections when you distribute them as  
separate works. But when you distribute the same sections as part of a whole which is a work based on the Program, the distribution of the whole must  
be on the terms of this License, whose permissions for other licensees extend to the entire whole, and thus to each and every part regardless of who  
wrote it.  
Thus, it is not the intent of this section to claim rights or contest your rights to work written entirely by you; rather, the intent is to exercise the right to  
control the distribution of derivative or collective works based on the Program.  
In addition, mere aggregation of another work not based on the Program with the Program (or with a work based on the Program) on a volume of a  
storage or distribution medium does not bring the other work under the scope of this License.  
3. You may copy and distribute the Program (or a work based on it, under Section 2) in object code or executable form under the terms of Sections 1 and 2  
above provided that you also do one of the following:  
a) Accompany it with the complete corresponding machine-readable source code, which must be distributed under the terms of Sections 1 and 2 above  
on a medium customarily used for software interchange; or,  
b) Accompany it with a written offer, valid for at least three years, to give any third party, for a charge no more than your cost of physically performing source  
distribution, a complete machine-readable copy of the corresponding source code, to be distributed under the terms of Sections 1 and 2 above on a  
medium customarily used for software interchange; or,  
c) Accompany it with the information you received as to the offer to distribute corresponding source code. (This alternative is allowed only for  
noncommercial distribution and only if you received the program in object code or executable form with such an offer, in accord with Subsection b  
above.)  
The source code for a work means the preferred form of the work for making modifications to it. For an executable work, complete source code means  
all the source code for all modules it contains, plus any associated interface definition files, plus the scripts used to control compilation and installation  
of the executable. However, as a special exception, the source code distributed need not include anything that is normally distributed (in either source  
or binary form) with the major components (compiler, kernel, and so on) of the operating system on which the executable runs, unless that component  
itself accompanies the executable.  
If distribution of executable or object code is made by offering access to copy from a designated place, then offering equivalent access to copy the source  
code from the same place counts as distribution of the source code, even though third parties are not compelled to copy the source along with the object  
code.  
4. You may not copy, modify, sublicense, or distribute the Program except as expressly provided under this License. Any attempt otherwise to copy, modify,  
sublicense or distribute the Program is void, and will automatically terminate your rights under this License. However, parties who have received copies, or  
rights, from you under this License will not have their licenses terminated so long as such parties remain in full compliance.  
5. You are not required to accept this License, since you have not signed it. However, nothing else grants you permission to modify or distribute the Program  
or its derivative works. These actions are prohibited by law if you do not accept this License. Therefore, by modifying or distributing the Program (or any work  
based on the Program), you indicate your acceptance of this License to do so, and all its terms and conditions for copying, distributing or modifying the  
Program or works based on it.  
6. Each time you redistribute the Program (or any work based on the Program), the recipient automatically receives a license from the original licensor to copy,  
distribute or modify the Program subject to these terms and conditions. You may not impose any further restrictions on the recipients’ exercise of the rights  
granted herein.  
You are not responsible for enforcing compliance by third parties to this License.  
7. If, as a consequence of a court judgment or allegation of patent infringement or for any other reason (not limited to patent issues), conditions are imposed  
on you (whether by court order, agreement or otherwise) that contradict the conditions of this License, they do not excuse you from the conditions of this  
License. If you cannot distribute so as to satisfy simultaneously your obligations under this License and any other pertinent obligations, then as a  
consequence you may not distribute the Program at all. For example, if a patent license would not permit royalty-free redistribution of the Program by all  
those who receive copies directly or indirectly through you, then the only way you could satisfy both it and this License would be to refrain entirely from  
distribution of the Program.  
If any portion of this section is held invalid or unenforceable under any particular circumstance, the balance of the section is intended to apply and the  
section as a whole is intended to apply in other circumstances.  
It is not the purpose of this section to induce you to infringe any patents or other property right claims or to contest validity of any such claims; this section  
has the sole purpose of protecting the integrity of the free software distribution system, which is implemented by public license practices. Many people have  
made generous contributions to the wide range of software distributed through that system in reliance on consistent application of that system; it is up to  
the author/donor to decide if he or she is willing to distribute software through any other system and a licensee cannot impose that choice.  
This section is intended to make thoroughly clear what is believed to be a consequence of the rest of this License.  
8. If the distribution and/or use of the Program is restricted in certain countries either by patents or by copyrighted interfaces, the original copyright holder  
who places the Program under this License may add an explicit geographical distribution limitation excluding those countries, so that distribution is  
permitted only in or among countries not thus excluded. In such case, this License incorporates the limitation as if written in the body of this License.  
60  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
9. The Free Software Foundation may publish revised and/or new versions of the General Public License from time to time. Such new versions will be similar  
in spirit to the present version, but may differ in detail to address new problems or concerns.  
09  
Each version is given a distinguishing version number. If the Program specifies a version number of this License which applies to it and “any later version”,  
you have the option of following the terms and conditions either of that version or of any later version published by the Free Software Foundation. If the  
Program does not specify a version number of this License, you may choose any version ever published by the Free Software Foundation.  
10.If you wish to incorporate parts of the Program into other free programs whose distribution conditions are different, write to the author to ask for permission.  
For software which is copyrighted by the Free Software Foundation, write to the Free Software Foundation; we sometimes make exceptions for this. Our  
decision will be guided by the two goals of preserving the free status of all derivatives of our free software and of promoting the sharing and reuse of software  
generally.  
NO WARRANTY  
11.BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE  
LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM “AS IS” WITHOUT  
WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY  
AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD  
THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION.  
12.IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY  
MODIFY AND/OR REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL,  
INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS  
OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO  
OPERATE WITH ANY OTHER PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.  
END OF TERMS AND CONDITIONS  
How to Apply These Terms to Your New Programs  
If you develop a new program, and you want it to be of the greatest possible use to the public, the best way to achieve this is to make it free software which  
everyone can redistribute and change under these terms.  
To do so, attach the following notices to the program. It is safest to attach them to the start of each source file to most effectively convey the exclusion of  
warranty; and each file should have at least the “copyright” line and a pointer to where the full notice is found.  
<one line to give the program’s name and a brief idea of what it does.>  
Copyright © <year> <name of author>  
This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software  
Foundation; either version 2 of the License, or (at your option) any later version.  
This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or  
FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details.  
You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 51 Franklin  
Street, Fifth Floor, Boston, MA 02110-1301 USA.  
Also add information on how to contact you by electronic and paper mail.  
If the program is interactive, make it output a short notice like this when it starts in an interactive mode:  
Gnomovision version 69, Copyright © year name of author  
Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type ‘show w’. This is free software, and you are welcome to redistribute it under  
certain conditions; type ‘show c’ for details.  
The hypothetical commands ‘show w’ and ‘show c’ should show the appropriate parts of the General Public License. Of course, the commands you use may  
be called something other than ‘show w’ and ‘show c’; they could even be mouse-clicks or menu items whatever suits your program.  
You should also get your employer (if you work as a programer) or your school, if any, to sign a “copyright disclaimer” for the program, if necessary. Here is a  
sample; alter the names:  
Yoyodyne, Inc., hereby disclaims all copyright interest in the program ‘Gnomovision’ (which makes passes at compilers) written by James Hacker.  
<signature of Ty Coon>, 1 April 1989  
Ty Coon, President of Vice  
This General Public License does not permit incorporating your program into proprietary programs. If your program is a subroutine library, you may consider  
it more useful to permit linking proprietary applications with the library. If this is what you want to do, use the GNU Lesser General Public License instead of  
this License.  
[GNU LESSER GENERAL PUBLIC LICENSE]  
Version 2.1, February 1999  
Copyright © 1991, 1999 Free Software Foundation, Inc.  
51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA  
Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed.  
[This is the first released version of the Lesser GPL. It also counts as the successor of the GNU Library Public License, version 2, hence the version number 2.1.]  
61  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Preamble  
09  
The licenses for most software are designed to take away your freedom to share and change it. By contrast, the GNU General Public Licenses are intended to  
guarantee your freedom to share and change free software to make sure the software is free for all its users. This license, the Lesser General Public License,  
applies to some specially designated software packages typically libraries of the Free Software Foundation and other authors who decide to use it. You can  
use it too, but we suggest you first think carefully about whether this license or the ordinary General Public License is the better strategy to use in any particular  
case, based on the explanations below.  
When we speak of free software, we are referring to freedom of use, not price. Our General Public Licenses are designed to make sure that you have the freedom  
to distribute copies of free software (and charge for this service if you wish); that you receive source code or can get it if you want it; that you can change the  
software and use pieces of it in new free programs; and that you are informed that you can do these things.  
To protect your rights, we need to make restrictions that forbid distributors to deny you these rights or to ask you to surrender these rights. These restrictions  
translate to certain responsibilities for you if you distribute copies of the library or if you modify it.  
For example, if you distribute copies of the library, whether gratis or for a fee, you must give the recipients all the rights that we gave you. You must make sure  
that they, too, receive or can get the source code. If you link other code with the library, you must provide complete object files to the recipients, so that they  
can relink them with the library after making changes to the library and recompiling it. And you must show them these terms so they know their rights. We  
protect your rights with a two-step method: (1) we copyright the library, and (2) we offer you this license, which gives you legal permission to copy, distribute  
and/or modify the library.  
To protect each distributor, we want to make it very clear that there is no warranty for the free library. Also, if the library is modified by someone else and passed  
on, the recipients should know that what they have is not the original version, so that the original author’s reputation will not be affected by problems that might  
be introduced by others.  
Finally, software patents pose a constant threat to the existence of any free program. We wish to make sure that a company cannot effectively restrict the users  
of a free program by obtaining a restrictive license from a patent holder. Therefore, we insist that any patent license obtained for a version of the library must  
be consistent with the full freedom of use specified in this license.  
Most GNU software, including some libraries, is covered by the ordinary GNU General Public License. This license, the GNU Lesser General Public License,  
applies to certain designated libraries, and is quite different from the ordinary General Public License. We use this license for certain libraries in order to permit  
linking those libraries into non-free programs.  
When a program is linked with a library, whether statically or using a shared library, the combination of the two is legally speaking a combined work, a derivative  
of the original library. The ordinary General Public License therefore permits such linking only if the entire combination fits its criteria of freedom. The Lesser  
General Public License permits more lax criteria for linking other code with the library.  
We call this license the “Lesser” General Public License because it does Less to protect the user’s freedom than the ordinary General Public License. It also  
provides other free software developers Less of an advantage over competing non-free programs. These disadvantages are the reason we use the ordinary  
General Public License for many libraries. However, the Lesser license provides advantages in certain special circumstances.  
For example, on rare occasions, there may be a special need to encourage the widest possible use of a certain library, so that it becomes a de-facto standard.  
To achieve this, non-free programs must be allowed to use the library. A more frequent case is that a free library does the same job as widely used non-free  
libraries. In this case, there is little to gain by limiting the free library to free software only, so we use the Lesser General Public License.  
In other cases, permission to use a particular library in non-free programs enables a greater number of people to use a large body of free software. For example,  
permission to use the GNU C Library in non-free programs enables many more people to use the whole GNU operating system, as well as its variant, the GNU  
Linux operating system.  
Although the Lesser General Public License is Less protective of the users’ freedom, it does ensure that the user of a program that is linked with the Library  
has the freedom and the wherewithal to run that program using a modified version of the Library.  
The precise terms and conditions for copying, distribution and modification follow. Pay close attention to the difference between a “work based on the library”  
and a “work that uses the library”. The former contains code derived from the library, whereas the latter must be combined with the library in order to run.  
GNU LESSER GENERAL PUBLIC LICENSE  
TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION  
0. This License Agreement applies to any software library or other program which contains a notice placed by the copyright holder or other authorized party  
saying it may be distributed under the terms of this Lesser General Public License (also called “this License”). Each licensee is addressed as “you”.  
A “library” means a collection of software functions and/or data prepared so as to be conveniently linked with application programs (which use some of  
those functions and data) to form executables.  
The “Library”, below, refers to any such software library or work which has been distributed under these terms. A “work based on the Library” means either  
the Library or any derivative work under copyright law: that is to say, a work containing the Library or a portion of it, either verbatim or with modifications  
and/or translated straightforwardly into another language. (Hereinafter, translation is included without limitation in the term “modification”.)  
“Source code” for a work means the preferred form of the work for making modifications to it. For a library, complete source code means all the source code  
for all modules it contains, plus any associated interface definition files, plus the scripts used to control compilation and installation of the library.  
Activities other than copying, distribution and modification are not covered by this License; they are outside its scope. The act of running a program using  
the Library is not restricted, and output from such a program is covered only if its contents constitute a work based on the Library (independent of the use  
of the Library in a tool for writing it). Whether that is true depends on what the Library does and what the program that uses the Library does.  
1. You may copy and distribute verbatim copies of the Library’s complete source code as you receive it, in any medium, provided that you conspicuously and  
appropriately publish on each copy an appropriate copyright notice and disclaimer of warranty; keep intact all the notices that refer to this License and to  
the absence of any warranty; and distribute a copy of this License along with the Library.  
You may charge a fee for the physical act of transferring a copy, and you may at your option offer warranty protection in exchange for a fee.  
2. You may modify your copy or copies of the Library or any portion of it, thus forming a work based on the Library, and copy and distribute such modifications  
or work under the terms of Section 1 above, provided that you also meet all of these conditions:  
62  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
a) The modified work must itself be a software library.  
09  
b) You must cause the files modified to carry prominent notices stating that you changed the files and the date of any change.  
c) You must cause the whole of the work to be licensed at no charge to all third parties under the terms of this License.  
d) If a facility in the modified Library refers to a function or a table of data to be supplied by an application program that uses the facility, other than as an  
argument passed when the facility is invoked, then you must make a good faith effort to ensure that, in the event an application does not supply such  
function or table, the facility still operates, and performs whatever part of its purpose remains meaningful. (For example, a function in a library to compute  
square roots has a purpose that is entirely well-defined independent of the application. Therefore, Subsection 2d requires that any application-supplied  
function or table used by this function must be optional: if the application does not supply it, the square root function must still compute square roots.)  
These requirements apply to the modified work as a whole. If identifiable sections of that work are not derived from the Library, and can be reasonably  
considered independent and separate works in themselves, then this License, and its terms, do not apply to those sections when you distribute them as  
separate works. But when you distribute the same sections as part of a whole which is a work based on the Library, the distribution of the whole must  
be on the terms of this License, whose permissions for other licensees extend to the entire whole, and thus to each and every part regardless of who  
wrote it.  
Thus, it is not the intent of this section to claim rights or contest your rights to work written entirely by you; rather, the intent is to exercise the right to  
control the distribution of derivative or collective works based on the Library.  
In addition, mere aggregation of another work not based on the Library with the Library (or with a work based on the Library) on a volume of a storage or  
distribution medium does not bring the other work under the scope of this License.  
3. You may opt to apply the terms of the ordinary GNU General Public License instead of this License to a given copy of the Library. To do this, you must alter  
all the notices that refer to this License, so that they refer to the ordinary GNU General Public License, version 2, instead of to this License. (If a newer version  
than version 2 of the ordinary GNU General Public License has appeared, then you can specify that version instead if you wish.) Do not make any other  
change in these notices.  
Once this change is made in a given copy, it is irreversible for that copy, so the ordinary GNU General Public License applies to all subsequent copies and  
derivative works made from that copy. This option is useful when you wish to copy part of the code of the Library into a program that is not a library.  
4. You may copy and distribute the Library (or a portion or derivative of it, under Section 2) in object code or executable form under the terms of Sections 1 and  
2 above provided that you accompany it with the complete corresponding machine-readable source code, which must be distributed under the terms of  
Sections 1 and 2 above on a medium customarily used for software interchange.  
If distribution of object code is made by offering access to copy from a designated place, then offering equivalent access to copy the source code from the  
same place satisfies the requirement to distribute the source code, even though third parties are not compelled to copy the source along with the object  
code.  
5. A program that contains no derivative of any portion of the Library, but is designed to work with the Library by being compiled or linked with it, is called a  
“work that uses the Library”. Such a work, in isolation, is not a derivative work of the Library, and therefore falls outside the scope of this License.  
6. However, linking a “work that uses the Library” with the Library creates an executable that is a derivative of the Library (because it contains portions of the  
Library), rather than a “work that uses the library”. The executable is therefore covered by this License. Section 6 states terms for distribution of such  
executables.  
When a “work that uses the Library” uses material from a header file that is part of the Library, the object code for the work may be a derivative work of the  
Library even though the source code is not. Whether this is true is especially significant if the work can be linked without the Library, or if the work is itself  
a library. The threshold for this to be true is not precisely defined by law.  
7. If such an object file uses only numerical parameters, data structure layouts and accessors, and small macros and small inline functions (ten lines or less  
in length), then the use of the object file is unrestricted, regardless of whether it is legally a derivative work. (Executables containing this object code plus  
portions of the Library will still fall under Section 6.)  
Otherwise, if the work is a derivative of the Library, you may distribute the object code for the work under the terms of Section 6. Any executables containing  
that work also fall under Section 6, whether or not they are linked directly with the Library itself.  
8. As an exception to the Sections above, you may also combine or link a “work that uses the Library” with the Library to produce a work containing portions  
of the Library, and distribute that work under terms of your choice, provided that the terms permit modification of the work for the customer’s own use and  
reverse engineering for debugging such modifications.  
You must give prominent notice with each copy of the work that the Library is used in it and that the Library and its use are covered by this License. You  
must supply a copy of this License. If the work during execution displays copyright notices, you must include the copyright notice for the Library among  
them, as well as a reference directing the user to the copy of this License. Also, you must do one of these things:  
a) Accompany the work with the complete corresponding machine-readable source code for the Library including whatever changes were used in the work  
(which must be distributed under Sections 1 and 2 above); and, if the work is an executable linked with the Library, with the complete machine-readable  
“work that uses the Library”, as object code and/or source code, so that the user can modify the Library and then relink to produce a modified executable  
containing the modified Library. (It is understood that the user who changes the contents of definitions files in the Library will not necessarily be able to  
recompile the application to use the modified definitions.)  
b) Use a suitable shared library mechanism for linking with the Library. A suitable mechanism is one that (1) uses at run time a copy of the library already  
present on the user’s computer system, rather than copying library functions into the executable, and (2) will operate properly with a modified version of  
the library, if the user installs one, as long as the modified version is interface-compatible with the version that the work was made with.  
c) Accompany the work with a written offer, valid for at least three years, to give the same user the materials specified in Subsection 6a, above, for a charge  
no more than the cost of performing this distribution.  
d) If distribution of the work is made by offering access to copy from a designated place, offer equivalent access to copy the above specified materials from  
the same place.  
e) Verify that the user has already received a copy of these materials or that you have already sent this user a copy.  
63  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
For an executable, the required form of the “work that uses the Library” must include any data and utility programs needed for reproducing the executable  
from it. However, as a special exception, the materials to be distributed need not include anything that is normally distributed (in either source or binary  
form) with the major components (compiler, kernel, and so on) of the operating system on which the executable runs, unless that component itself  
accompanies the executable.  
09  
It may happen that this requirement contradicts the license restrictions of other proprietary libraries that do not normally accompany the operating  
system. Such a contradiction means you cannot use both them and the Library together in an executable that you distribute.  
9. You may place library facilities that are a work based on the Library side-by-side in a single library together with other library facilities not covered by this  
License, and distribute such a combined library, provided that the separate distribution of the work based on the Library and of the other library facilities is  
otherwise permitted, and provided that you do these two things:  
a) Accompany the combined library with a copy of the same work based on the Library, uncombined with any other library facilities. This must be distributed  
under the terms of the Sections above.  
b) Give prominent notice with the combined library of the fact that part of it is a work based on the Library, and explaining where to find the accompanying  
uncombined form of the same work.  
10.You may not copy, modify, sublicense, link with, or distribute the Library except as expressly provided under this License. Any attempt otherwise to copy,  
modify, sublicense, link with, or distribute the Library is void, and will automatically terminate your rights under this License. However, parties who have  
received copies, or rights, from you under this License will not have their licenses terminated so long as such parties remain in full compliance.  
11.You are not required to accept this License, since you have not signed it. However, nothing else grants you permission to modify or distribute the Library or  
its derivative works. These actions are prohibited by law if you do not accept this License. Therefore, by modifying or distributing the Library (or any work  
based on the Library), you indicate your acceptance of this License to do so, and all its terms and conditions for copying, distributing or modifying the Library  
or works based on it.  
12.Each time you redistribute the Library (or any work based on the Library), the recipient automatically receives a license from the original licensor to copy,  
distribute, link with or modify the Library subject to these terms and conditions. You may not impose any further restrictions on the recipients’ exercise of  
the rights granted herein. You are not responsible for enforcing compliance by third parties with this License.  
13.If, as a consequence of a court judgment or allegation of patent infringement or for any other reason (not limited to patent issues), conditions are imposed  
on you (whether by court order, agreement or otherwise) that contradict the conditions of this License, they do not excuse you from the conditions of this  
License. If you cannot distribute so as to satisfy simultaneously your obligations under this License and any other pertinent obligations, then as a  
consequence you may not distribute the Library at all. For example, if a patent license would not permit royalty-free redistribution of the Library by all those  
who receive copies directly or indirectly through you, then the only way you could satisfy both it and this License would be to refrain entirely from distribution  
of the Library. If any portion of this section is held invalid or unenforceable under any particular circumstance, the balance of the section is intended to  
apply, and the section as a whole is intended to apply in other circumstances.  
It is not the purpose of this section to induce you to infringe any patents or other property right claims or to contest validity of any such claims; this section  
has the sole purpose of protecting the integrity of the free software distribution system which is implemented by public license practices. Many people have  
made generous contributions to the wide range of software distributed through that system in reliance on consistent application of that system; it is up to  
the author donor to decide if he or she is willing to distribute software through any other system and a licensee cannot impose that choice.  
This section is intended to make thoroughly clear what is believed to be a consequence of the rest of this License.  
14.If the distribution and/or use of the Library is restricted in certain countries either by patents or by copyrighted interfaces, the original copyright holder who  
places the Library under this License may add an explicit geographical distribution limitation excluding those countries, so that distribution is permitted  
only in or among countries not thus excluded. In such case, this License incorporates the limitation as if written in the body of this License.  
15.The Free Software Foundation may publish revised and/or new versions of the Lesser General Public License from time to time. Such new versions will be  
similar in spirit to the present version, but may differ in detail to address new problems or concerns.  
Each version is given a distinguishing version number. If the Library specifies a version number of this License which applies to it and “any later version”,  
you have the option of following the terms and conditions either of that version or of any later version published by the Free Software Foundation. If the  
Library does not specify a license version number, you may choose any version ever published by the Free Software Foundation.  
16.If you wish to incorporate parts of the Library into other free programs whose distribution conditions are incompatible with these, write to the author to ask  
for permission. For software which is copyrighted by the Free Software Foundation, write to the Free Software Foundation; we sometimes make exceptions  
for this. Our decision will be guided by the two goals of preserving the free status of all derivatives of our free software and of promoting the sharing and  
reuse of software generally.  
NO WARRANTY  
17.BECAUSE THE LIBRARY IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY FOR THE LIBRARY, TO THE EXTENT PERMITTED BY APPLICABLE  
LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES PROVIDE THE LIBRARY “AS IS” WITHOUT  
WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY  
AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE LIBRARY IS WITH YOU. SHOULD THE  
LIBRARY PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION.  
18.IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY  
MODIFY AND/OR REDISTRIBUTE THE LIBRARY AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL,  
INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE LIBRARY (INCLUDING BUT NOT LIMITED TO LOSS  
OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF THE LIBRARY TO OPERATE  
WITH ANY OTHER SOFTWARE), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.  
END OF TERMS AND CONDITIONS  
64  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
How to Apply These Terms to Your New Libraries  
09  
If you develop a new library, and you want it to be of the greatest possible use to the public, we recommend making it free software that everyone can redistribute  
and change. You can do so by permitting redistribution under these terms (or, alternatively, under the terms of the ordinary General Public License).  
To apply these terms, attach the following notices to the library. It is safest to attach them to the start of each source file to most effectively convey the exclusion  
of warranty; and each file should have at least the “copyright” line and a pointer to where the full notice is found.  
<one line to give the library’s name and a brief idea of what it does.>  
Copyright © <year> <name of author>  
This library is free software; you can redistribute it and/or modify it under the terms of the GNU Lesser General Public License as published by the Free Software  
Foundation; either version 2.1 of the License, or (at your option) any later version.  
This library is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS  
FOR A PARTICULAR PURPOSE. See the GNU Lesser General Public License for more details.  
You should have received a copy of the GNU Lesser General Public License along with this library; if not, write to the Free Software Foundation, Inc., 51 Franklin  
Street, Fifth Floor, Boston, MA 02110-1301 USA  
Also add information on how to contact you by electronic and paper mail.  
You should also get your employer (if you work as a programer) or your school, if any, to sign a “copyright disclaimer” for the library, if necessary. Here is a  
sample; alter the names:  
Yoyodyne, Inc., hereby disclaims all copyright interest in the library ‘Frob’ (a library for tweaking knobs) written by James Random Hacker.  
<signature of Ty Coon>, 1 April 1990  
Ty Coon, President of Vice  
That’s all there is to it!  
[Linux Source Notice]  
The software programs used on this product include the Linux operating system. The Linux contains software licensed for use based on the terms of a GNU  
General Public License. The machine readable copy of the corresponding source code is available for the cost of distribution.  
For more information or to obtain a copy, contact your local Pioneer Customer Service center.  
Details of the GNU General Public License can be found at the GNU website (http://www.gnu.org).  
Audio characteristics  
Specifications  
Frequency response . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Hz to 22 kHz  
S/N ratio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 115 dB  
Dynamic range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108 dB  
General  
Total harmonic distortion. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.0015 %  
Wow and flutter . . . . . . . . . . . . Limit of measurement (0.001 % W. PEAK) or lower  
System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Blu-ray Disc PLAYER  
(BD-ROM, DVD-Video, DVD-R/-RW, CD, network file playback)  
Power requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AC 120 V, 60 Hz  
Power consumption . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35 W  
Power consumption (standby) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .0.5 W  
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6.6 kg (14 lb 9 oz)  
Dimensions . . . . . . . . . . . . . . . . . . . . . . . . 420 mm (W) x 103 mm (H) x 353 mm (D)  
(16 9/16 in. (W) x 4 1/16 in. (H) x 13 15/16 in. (D))  
Digital output  
Optical digital output . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Optical digital jack  
Coaxial digital output . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . RCA jack  
Other terminals  
LAN terminal. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Ethernet jack (100BASE-TX)  
Control in. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Minijack (3.5 ø)  
IR in . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Minijack (3.5 ø)  
Operating temperature . . . . . . . . . . . . . . . . . . . +5 °C to +35 °C (+41 °F to +95 °F)  
Operating humidity . . . . . . . . . . . . . . . . . . . . . . . . . . .5 % to 85 % (no condensation)  
HDMI output  
Accessories  
HDMI output . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19-pin  
Remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1  
AA/R6P dry cell batteries. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2  
Stereo audio cable (red/white plugs) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1  
Video cable (yellow plugs) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1  
LAN cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1  
Power cable. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1  
Warranty card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1  
Operating instructions  
Component Video output (Y, PB, PR  
)
Output level . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Y: 1.0 Vp-p (75 Ω)  
PB, PR: 0.7 Vp-p (75 Ω)  
Jacks. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .RCA jacks  
S-Video output  
Y (luminance) - Output level . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 Vp-p (75 Ω)  
C (color) - Output level. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 286 mVp-p (75 Ω)  
Jack. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . S-Video jack  
The specifications and design of this product are subject to change without notice.  
Video output  
Output level . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 Vp-p (75 Ω)  
Jack. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .RCA jack  
Audio output (1 stereo pair)  
Output level . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . During audio output  
200 mVrms (1 kHz, –20 dB)  
Number of channels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2  
Jacks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .RCA jack  
Audio output (multi-channel/L, R, C, SW, LS, RS)  
Output level . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . During audio output  
200 mVrms (1 kHz, –20 dB)  
Number of channels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6  
Jacks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .RCA jack  
65  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Should this product require service in the U.S.A. and you wish to locate the nearest Pioneer  
Authorized Independent Service Company, or if you wish to purchase replacement parts,  
operating instructions, service manuals, or accessories, please call the number shown  
below.  
1 – 8 0 0 – 4 2 1 – 1 4 0 4  
Please do not ship your product to Pioneer without first calling the Customer Support at the  
above listed number for assistance.  
Pioneer Electronics Service, Inc.  
P.O. BOX 1760, Long Beach,  
CA 90801-1760, U.S.A.  
For warranty information please see the Limited Warranty sheet included with your product.  
Should this product require service in Canada, please contact a Pioneer Canadian  
Authorized Dealer to locate the nearest Pioneer Authorized Service Company in Canada.  
Alternatively, please contact the Customer Satisfaction Department at the following address:  
Pioneer Electronics of Canada, Inc.  
Customer Satisfaction Department  
300 Allstate Parkway, Markham, Ontario L3R 0P2  
1-877-283-5901  
905-479-4411  
For warranty information please see the Limited Warranty sheet included with your product.  
Si ce produit doit être réparé au Canada, veuillez vous adresser à un distributeur autorisé  
Pioneer du Canada pour obtenir le nom du Centre de Service Autorisé Pioneer le plus près  
de chez-vous. Vous pouvez aussi contacter le Service à la clientèle de Pioneer:  
Pioneer Électroniques du Canada, Inc.  
Service Clientèle  
300, Allstate Parkway, Markham, Ontario L3R 0P2  
1-877-283-5901  
905-479-4411  
Pour obtenir des renseignements sur la garantie, veuillez vous reporter au feuillet sur la  
garantie restreinte qui accompagne le produit.  
S018_C_EF  
Register Your Product on  
PIONEER CORPORATION  
4-1, Meguro 1-Chome, Meguro-ku, Tokyo 153-8654, Japan  
PIONEER ELECTRONICS (USA) INC.  
P.O. BOX 1540, Long Beach, California 90801-1540, U.S.A. TEL: (800) 421-1404  
PIONEER ELECTRONICS OF CANADA, INC.  
300 Allstate Parkway, Markham, Ontario L3R 0P2, Canada TEL: 1-877-283-5901, 905-479-4411  
PIONEER EUROPE NV  
Haven 1087, Keetberglaan 1, B-9120 Melsele, Belgium TEL: 03/570.05.11  
PIONEER ELECTRONICS ASIACENTRE PTE. LTD.  
253 Alexandra Road, #04-01, Singapore 159936 TEL: 65-6472-7555  
PIONEER ELECTRONICS AUSTRALIA PTY. LTD.  
178-184 Boundary Road, Braeside, Victoria 3195, Australia, TEL: (03) 9586-6300  
PIONEER ELECTRONICS DE MEXICO S.A. DE C.V.  
Blvd.Manuel Avila Camacho 138 10 piso Col.Lomas de Chapultepec, Mexico,D.F. 11000 TEL: 55-9178-4270  
K002_B_En  
PIONEER, ELITE, SOUND.VISION.SOUL, and the Pioneer, Elite and  
sound.vision.soul logos are trademarks of Pioneer Corporation.  
Published by Pioneer Corporation.  
Copyright © 2007 Pioneer Corporation.  
All rights reserved.  
<07I000001>  
<VRB1478-A>  
Printed in Japan  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Pelco Video Gaming Accessories WCS1 4 User Manual
Philips DVD Recorder DVDR3375 93 User Manual
Philips MP3 Player ACT500 05 User Manual
Philips Range SBC SC468 User Manual
Philips Toaster HD2528 User Manual
Pioneer Car Stereo System DEH 9300SD User Manual
Pixel Magic Systems TV Cables SE150 DH User Manual
Planar Car Video System PL180M User Manual
Plantronics Headphones WG100 B User Manual
Poulan Blower BVM200 LE User Manual